summaryrefslogtreecommitdiffstats
path: root/arch/arm/include/asm/arch-sunxi/clock_sun6i.h
Commit message (Collapse)AuthorAgeFilesLines
* sunxi: Downclock AHB1 to 100MHz on Allwinner A64Siarhei Siamashka2016-06-101-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently the AHB1 clock speed is configured as 200MHz by the SPL, but this causes a subtle and hard to reproduce data corruption in SRAM C (for example, this can't be easily detected with a trivial memset/memcmp test). For what it's worth, the Allwinner's BSP configures AHB1 as 200MHz, as can be verified by running the devmem2 tool in the system running the Allwinner's kernel 3.10.x: 0x1C20028: PLL_PERIPH0_CTRL_REG = 0x90041811 0x1C20054: AHB1_APB1_CFG_REG = 0x3180 0x1C20058: APB2_CFG_REG = 0x1000000 0x1C2005C: AHB2_CFG_REG = 0x1 However the FEL mode uses more conservative settings (100MHz for AHB1): 0x1C20028: PLL_PERIPH0_CTRL_REG = 0x90041811 0x1C20054: AHB1_APB1_CFG_REG = 0x3190 0x1C20058: APB2_CFG_REG = 0x1000000 0x1C2005C: AHB2_CFG_REG = 0x0 It is yet to be confirmed whether faster AHB1/AHB2 clock settings can be used safely if we initialize the AXP803 PMIC instead of using reset defaults. But in order to resolve the data corruption problem right now, it's best to downclock AHB1 to a safe level. Note that this issue only affects the SPL, which is not fully supported on Allwinner A64 yet and it should not affect the boot0 usage (unless somebody can confirm SRAM C corruption with the boot0 too). Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* sunxi: Add support for Allwinner A64 SoCsSiarhei Siamashka2016-04-011-3/+5
| | | | | | | | | | | | | | | The Allwinner A64 SoC is used in the Pine64. This patch adds all bits necessary to compile U-Boot for it running in AArch64 mode. Unfortunately SPL is not ready yet due to legal problems, so we need to boot using the binary boot0 for now. Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com> [agraf: remove SPL code, move to AArch64] Signed-off-by: Alexander Graf <agraf@suse.de> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* sunxi: H3: Add support for the host usb-physJelle van der Waa2016-02-231-0/+22
| | | | | | | | Add support for phy 1-3. Signed-off-by: Jelle van der Waa <jelle@vdwaa.nl> [hdegoede@redhat.com: use setclrbits_le32 instead of read-modify-write] Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* sunxi: Support H3 CCU security switchesChen-Yu Tsai2016-01-261-0/+7
| | | | | | | | | | | | | | | | H3's CCU includes some switches which disable non-secure access to some of the more critical clock controls, such as MBUS, PLLs, and main platform busses. Configure them to enable non-secure access. For now the only SoC that has this feature is the H3. For other platforms just use a default (weak) empty function so things do not break. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* sunxi: Set AHB1 clock to PLL6/3 on all clock_sun6i.h using SoCsHans de Goede2015-12-101-4/+0
| | | | | | | | | | | According to the datasheets the max speed of AHB1 is 276 MHz, so setting it to PLL6 / 3 which gives us 200MHz everywhere is fine, and gives us a nice speed-up in certain workloads. Suggested-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk> Tested-by: Chen-Yu Tsai <wens@csie.org>
* sunxi: clock: Set AHB1 clock frequency to 200MHz on Allwinner H3Siarhei Siamashka2015-11-221-1/+6
| | | | | | | | | | | | | | | | | | | | | The 3.4 kernel from the Allwinner SDK is clocking AHB1 at 200MHz on Allwinner H3 and using PLL6 as the clock source (PLL6/3). This can be verified by reading the value of the AHB1_APB1_CFG_REG register via /dev/mem. It always reads as 0x3180 regardless of the current cpufreq operating point. So this configuration should be safe for use in U-Boot too. PLL6 also needs to be configured before it is used as the clock source, according to the "CCU / Programming Guidelines" section of the Allwinner manual. The current low AHB1 clock speed is limiting the USB transfer speed when booting via FEL. This patch can increase the FEL USB transfer speed from ~510 KB/s to ~950 KB/s. Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* sunxi: Add H3 DRAM initialization supportJens Kuske2015-11-221-0/+3
| | | | | | | | Based on existing A23/A33 code and the original H3 boot0. Signed-off-by: Jens Kuske <jenskuske@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* sun6i: clock: Add support for the mipi pllHans de Goede2015-08-141-0/+14
| | | | | | | | Add support for the mipi pll, this is necessary for getting higher dotclocks with lcd panels. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sunxi: clock: Add clock_get_pll3() helper functionHans de Goede2015-08-141-0/+5
| | | | | | | Add a helper function to get the pll3 clock rate. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sunxi: display: Add a few extra register and constant definesHans de Goede2015-08-081-0/+1
| | | | | | | | | | | | | Add a few extra sunxi display registers and constant defines. Also rename some existing defines (e.g. dropping _GCTRL) and make some more generic (e.g. dropping the 2x scaling from SUNXI_LCDC_TCON1_TIMING_V_TOTAL). This is a preparation patch for adding composite video out support. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sunxi: Match sun4i, sun6i, sun9i CCI definitions for NAND and DMARoy Spliet2015-05-291-0/+3
| | | | | | | | | Make sure definitions for NAND clock and DMA gate bits are the same across boards. Signed-off-by: Roy Spliet <r.spliet@ultimaker.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* sunxi: video: Fix lvds panel support for sun6i+Hans de Goede2015-05-191-0/+3
| | | | | | | | | We've never tested the lvds panel support on sun6i+ SoCs until now, and unsurprisingly the lvds code needed some fixes to work on my ga10h A33 tablet with lvds panel. This makes the panel on that tablet actually work. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sunxi: ohci: Add ohci usb host controller supportHans de Goede2015-05-141-0/+2
| | | | | | | | | | | | | This commit adds support for the OHCI companion controller, which makes usb-1 devices directly plugged into to usb root port work. Note for now this switches usb-keyboard support for sunxi back from int-queue support to the old interrupt polling method. Adding int-queue support to the ohci code and switching back to int-queue support is in the works. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Marek Vasut <marex@denx.de> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sunxi: Add support for A33 PLL11 (second DRAM pll)Hans de Goede2015-05-041-3/+28
| | | | | | | Add support for the new second DRAM PLL found on the A33 SoC. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sunxi: Add a GMAC Transmit Clock Delay Chain Kconfig optionHans de Goede2015-02-021-0/+2
| | | | | | | | And use this to set the GMAC Transmit Clock Delay Chain value on Banana boards, rather then keying of CONFIG_TARGET_FOO. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sunxi: Move clock_get_pllX / clock_set_pllX protos to mach specific headersHans de Goede2015-01-221-0/+5
| | | | | | | | | | | Which pll-s are available depends on the machine type, move the clock_get_pllX / clock_set_pllX prototypes to the clock_sun?i.h header files so that we only declare what is actually available. e.g. clock_get_pll5p() is not available on sun6i / sun8i, and with sun9i we get a completely different set of plls. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sunxi: usbc: Add support for usb0 to the common usbc codeHans de Goede2015-01-141-0/+2
| | | | | Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sunxi: Move usb-controller init code out of ehci-sunxi.c for reuse for otgHans de Goede2015-01-141-0/+1
| | | | | | | | | | Most of the usb-controller init code found in ehci-sunxi.c also is necessary to init the otg usb controller, so move it to a common place. While at it also update various #ifdefs / defines for sun8i support. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sunxi: video: Modify sunxi_lcdc_pll_set to work with both tcon0 and tcon1Hans de Goede2015-01-141-0/+2
| | | | | | | | | | | | | Modify sunxi_lcdc_pll_set to work with both tcon0 and tcon1, this is a preparation patch for adding lcd support. While at it also swap the divider search order, searching from low to high, as the comment above the code says we should do. In cases where there are multiple solutions this will result in picking a lower pll clock and divider, which is more stable and saves power. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sunxi: Fix PLL1 running at half speed on sun8iHans de Goede2015-01-141-1/+1
| | | | | | | | | | PLL1 on sun6i / sun8i also has a p factor which divides the clock by 2^p (to the power p). On sun6i the p factor is ignored, but on sun8i it is used and we were setting it to 1, resulting in the CPU running at 504 MHz instead of 1008 MHz, this commit fixes this. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sun8i: Add dram initialization supportHans de Goede2015-01-141-0/+4
| | | | | | | | Based on the register / dram_para headers from the Allwinner u-boot / linux sources + the init sequences from boot0. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sun6i: Add a sigma_delta_enable paramter to clock_set_pll5()Hans de Goede2015-01-141-0/+5
| | | | | | | | The sun8i dram code sometimes wants to enable sigma delta mode, add a parameter to allow this. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sunxi: mmc: Properly setup mod-clk and clock sampling phasesHans de Goede2015-01-141-4/+7
| | | | | | | | | | | | | | | | | | | | | | | The sunxi mmc controller has both an internal clock divider, as well as the divider in the mod0-clk for the mmc controller. The internal divider cannot be used, as it conflicts with the setting of clock sampling phases which is done in the mod0-clk, so it must be set to 0 (divide by 1). For some reason while the kernel has had this correct from day one, the u-boot sunxi mmc code has been using a fixed mod0-clk and setting its internal divider depending on the desired speed. This is something which we've inherited from the original Allwinner u-boot sources, but while this has been fixed in Allwinner's own u-boot code at least for the A23 and later upstream u-boot was still doing this wrong. This commit fixes this, thereby also fixing mmc support not working reliable on the A23 (which seems more sensitive to this) and possible also fixes some other sunxi mmc issues. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sun6i: Add sunxi_get_ss_bonding_id() functionHans de Goede2015-01-141-1/+3
| | | | | | | | Add a sunxi_get_ss_bonding_id() function, and use it to differentiate between the A31s and the A31. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sun6i: Add gmac support for sun6i boardsHans de Goede2014-11-251-0/+8
| | | | | | | Hookup the gmac found on the sun6i / A31 SoCs. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sunxi: Add video pll clock functionsHans de Goede2014-11-251-1/+58
| | | | | | | This is a preparation patch for adding support for HDMI out. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sun6i: ehci: Add sun6i ehci supportHans de Goede2014-11-131-0/+11
| | | | | | | | Add support for the 2 ehci controllers found on the sun6i (A31) soc. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk> Acked-by: Marek Vasut <marex@denx.de>
* sun6i: Add clock functions needed for SPL / DRAM initHans de Goede2014-11-131-1/+26
| | | | | | | | | | Add clock_init_safe and clockset_pll5 functions, as these are needed for SPL support resp. DRAM init (which is needed for SPL too). Also add some extra clock register constant defines. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* ARM: sun6i: Add clock supportChen-Yu Tsai2014-10-241-0/+205
This patch adds the basic clocks support for the Allwinner A31 (sun6i) processor. This code will not been compiled until the build is hooked up in a later patch. It has been split out to keep the patches manageable. This includes changes from the following commits from u-boot-sunxi: a92051b ARM: sunxi: Add sun6i clock controller structure 1f72c6f ARM: sun6i: Setup the UART0 clocks 5f2e712 ARM: sunxi: Enable pll6 by default on all models 2be2f2a ARM: sunxi-mmc: Add mmc support for sun6i / A31 12e1633 ARM: sun6i: Add initial clock setup for SPL 1a9c9c6 ARM: sunxi: Split clock code into common, sun4i and sun6i code 0b194ee ARM: sun6i: Properly setup the PLL LDO in clock_init_safe b54c626 sunxi: avoid sr32 for APB1 clock setup. 68fe29c sunxi: remove magic numbers from clock_get_pll{5,6} c89867d sunxi: clocks: clock_get_pll5 prototype and coding style 501ab1e ARM: sunxi: Fix sun6i PLL6 settings 37f669b ARM: sunxi: Fix macro names for mmc and uart reset offsets 61de1e6 ARM: sunxi: Correct comment for MBUS1 register in sun6i clock definitions Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Signed-off-by: Hans de Goede <hdegoede@redhat.com> [wens@csie.org: styling fixes reported by checkpatch.pl] [wens@csie.org: drop unsupported SPL code block and unused gpio.h header] Signed-off-by: Chen-Yu Tsai <wens@csie.org> Cc: Tom Cubie <Mr.hipboi@gmail.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
OpenPOWER on IntegriCloud