diff options
Diffstat (limited to 'arch/arm/boot/dts')
669 files changed, 44890 insertions, 12721 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 9159fa2cea90..d6546d2676b9 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -37,17 +37,24 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \ at91-ariag25.dtb \ at91-ariettag25.dtb \ at91-cosino_mega2560.dtb \ - at91-kizboxmini.dtb \ + at91-kizboxmini-base.dtb \ + at91-kizboxmini-mb.dtb \ + at91-kizboxmini-rd.dtb \ + at91-smartkiz.dtb \ at91-wb45n.dtb \ at91sam9g15ek.dtb \ at91sam9g25ek.dtb \ at91sam9g35ek.dtb \ at91sam9x25ek.dtb \ at91sam9x35ek.dtb +dtb-$(CONFIG_SOC_SAM9X60) += \ + at91-sam9x60ek.dtb dtb-$(CONFIG_SOC_SAM_V7) += \ - at91-kizbox2.dtb \ + at91-kizbox2-2.dtb \ + at91-kizbox3-hs.dtb \ at91-nattis-2-natte-2.dtb \ at91-sama5d27_som1_ek.dtb \ + at91-sama5d27_wlsom1_ek.dtb \ at91-sama5d2_ptc_ek.dtb \ at91-sama5d2_xplained.dtb \ at91-sama5d3_xplained.dtb \ @@ -83,6 +90,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += \ bcm2837-rpi-3-b.dtb \ bcm2837-rpi-3-b-plus.dtb \ bcm2837-rpi-cm3-io3.dtb \ + bcm2711-rpi-4-b.dtb \ bcm2835-rpi-zero.dtb \ bcm2835-rpi-zero-w.dtb dtb-$(CONFIG_ARCH_BCM_5301X) += \ @@ -113,6 +121,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ bcm47094-luxul-abr-4500.dtb \ bcm47094-luxul-xap-1610.dtb \ bcm47094-luxul-xbr-4500.dtb \ + bcm47094-luxul-xwc-2000.dtb \ bcm47094-luxul-xwr-3100.dtb \ bcm47094-luxul-xwr-3150-v1.dtb \ bcm47094-netgear-r8500.dtb \ @@ -336,7 +345,9 @@ dtb-$(CONFIG_MACH_MESON8) += \ dtb-$(CONFIG_ARCH_MMP) += \ pxa168-aspenite.dtb \ pxa910-dkb.dtb \ - mmp2-brownstone.dtb + mmp2-brownstone.dtb \ + mmp2-olpc-xo-1-75.dtb \ + mmp3-dell-ariel.dtb dtb-$(CONFIG_ARCH_MPS2) += \ mps2-an385.dtb \ mps2-an399.dtb @@ -417,6 +428,10 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6dl-gw560x.dtb \ imx6dl-gw5903.dtb \ imx6dl-gw5904.dtb \ + imx6dl-gw5907.dtb \ + imx6dl-gw5910.dtb \ + imx6dl-gw5912.dtb \ + imx6dl-gw5913.dtb \ imx6dl-hummingboard.dtb \ imx6dl-hummingboard-emmc-som-v15.dtb \ imx6dl-hummingboard-som-v15.dtb \ @@ -488,6 +503,10 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-gw560x.dtb \ imx6q-gw5903.dtb \ imx6q-gw5904.dtb \ + imx6q-gw5907.dtb \ + imx6q-gw5910.dtb \ + imx6q-gw5912.dtb \ + imx6q-gw5913.dtb \ imx6q-h100.dtb \ imx6q-hummingboard.dtb \ imx6q-hummingboard-emmc-som-v15.dtb \ @@ -549,9 +568,11 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6qp-zii-rdu2.dtb dtb-$(CONFIG_SOC_IMX6SL) += \ imx6sl-evk.dtb \ + imx6sl-tolino-shine3.dtb \ imx6sl-warp.dtb dtb-$(CONFIG_SOC_IMX6SLL) += \ - imx6sll-evk.dtb + imx6sll-evk.dtb \ + imx6sll-kobo-clarahd.dtb dtb-$(CONFIG_SOC_IMX6SX) += \ imx6sx-nitrogen6sx.dtb \ imx6sx-sabreauto.dtb \ @@ -569,17 +590,23 @@ dtb-$(CONFIG_SOC_IMX6UL) += \ imx6ul-geam.dtb \ imx6ul-isiot-emmc.dtb \ imx6ul-isiot-nand.dtb \ + imx6ul-kontron-n6310-s.dtb \ + imx6ul-kontron-n6310-s-43.dtb \ imx6ul-liteboard.dtb \ imx6ul-opos6uldev.dtb \ imx6ul-pico-hobbit.dtb \ imx6ul-pico-pi.dtb \ - imx6ul-phytec-phyboard-segin-full.dtb \ + imx6ul-phytec-segin-ff-rdk-nand.dtb \ imx6ul-tx6ul-0010.dtb \ imx6ul-tx6ul-0011.dtb \ imx6ul-tx6ul-mainboard.dtb \ imx6ull-14x14-evk.dtb \ imx6ull-colibri-eval-v3.dtb \ imx6ull-colibri-wifi-eval-v3.dtb \ + imx6ull-opos6uldev.dtb \ + imx6ull-phytec-segin-ff-rdk-nand.dtb \ + imx6ull-phytec-segin-ff-rdk-emmc.dtb \ + imx6ull-phytec-segin-lc-rdk-nand.dtb \ imx6ulz-14x14-evk.dtb dtb-$(CONFIG_SOC_IMX7D) += \ imx7d-cl-som-imx7.dtb \ @@ -594,11 +621,13 @@ dtb-$(CONFIG_SOC_IMX7D) += \ imx7d-sdb.dtb \ imx7d-sdb-reva.dtb \ imx7d-sdb-sht11.dtb \ + imx7d-zii-rmu2.dtb \ imx7d-zii-rpu2.dtb \ imx7s-colibri-eval-v3.dtb \ imx7s-mba7.dtb \ imx7s-warp.dtb dtb-$(CONFIG_SOC_IMX7ULP) += \ + imx7ulp-com.dtb \ imx7ulp-evk.dtb dtb-$(CONFIG_SOC_LS1021A) += \ ls1021a-moxa-uc-8410a.dtb \ @@ -678,6 +707,7 @@ dtb-$(CONFIG_ARCH_OMAP3) += \ omap3-devkit8000.dtb \ omap3-devkit8000-lcd43.dtb \ omap3-devkit8000-lcd70.dtb \ + omap3-echo.dtb \ omap3-evm.dtb \ omap3-evm-37xx.dtb \ omap3-gta04a3.dtb \ @@ -746,6 +776,9 @@ dtb-$(CONFIG_SOC_AM33XX) += \ am335x-moxa-uc-2101.dtb \ am335x-moxa-uc-8100-me-t.dtb \ am335x-nano.dtb \ + am335x-netcan-plus-1xx.dtb \ + am335x-netcom-plus-2xx.dtb \ + am335x-netcom-plus-8xx.dtb \ am335x-pdu001.dtb \ am335x-pepper.dtb \ am335x-phycore-rdk.dtb \ @@ -758,6 +791,7 @@ dtb-$(CONFIG_SOC_AM33XX) += \ am335x-wega-rdk.dtb \ am335x-osd3358-sm-red.dtb dtb-$(CONFIG_ARCH_OMAP4) += \ + omap4-droid-bionic-xt875.dtb \ omap4-droid4-xt894.dtb \ omap4-duovero-parlor.dtb \ omap4-kc1.dtb \ @@ -905,9 +939,9 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \ rk3188-radxarock.dtb \ rk3228-evb.dtb \ rk3229-evb.dtb \ + rk3229-xms6.dtb \ rk3288-evb-act8846.dtb \ rk3288-evb-rk808.dtb \ - rk3288-fennec.dtb \ rk3288-firefly-beta.dtb \ rk3288-firefly.dtb \ rk3288-firefly-reload.dtb \ @@ -919,6 +953,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \ rk3288-tinker.dtb \ rk3288-tinker-s.dtb \ rk3288-veyron-brain.dtb \ + rk3288-veyron-fievel.dtb \ rk3288-veyron-jaq.dtb \ rk3288-veyron-jerry.dtb \ rk3288-veyron-mickey.dtb \ @@ -926,6 +961,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \ rk3288-veyron-minnie.dtb \ rk3288-veyron-pinky.dtb \ rk3288-veyron-speedy.dtb \ + rk3288-veyron-tiger.dtb \ rk3288-vyasa.dtb dtb-$(CONFIG_ARCH_S3C24XX) += \ s3c2416-smdk2416.dtb @@ -1096,6 +1132,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-h3-beelink-x2.dtb \ sun8i-h3-libretech-all-h3-cc.dtb \ sun8i-h3-mapleboard-mp130.dtb \ + sun8i-h3-nanopi-duo2.dtb \ sun8i-h3-nanopi-m1.dtb \ sun8i-h3-nanopi-m1-plus.dtb \ sun8i-h3-nanopi-neo.dtb \ @@ -1109,11 +1146,13 @@ dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-h3-orangepi-plus2e.dtb \ sun8i-h3-orangepi-zero-plus2.dtb \ sun8i-h3-rervision-dvk.dtb \ + sun8i-h3-emlid-neutis-n5h3-devboard.dtb \ sun8i-r16-bananapi-m2m.dtb \ sun8i-r16-nintendo-nes-classic.dtb \ sun8i-r16-nintendo-super-nes-classic.dtb \ sun8i-r16-parrot.dtb \ sun8i-r40-bananapi-m2-ultra.dtb \ + sun8i-s3-lichee-zero-plus.dtb \ sun8i-t3-cqa3t-bv3.dtb \ sun8i-v3s-licheepi-zero.dtb \ sun8i-v3s-licheepi-zero-dock.dtb \ @@ -1161,7 +1200,9 @@ dtb-$(CONFIG_ARCH_U8500) += \ ste-hrefprev60-stuib.dtb \ ste-hrefprev60-tvk.dtb \ ste-hrefv60plus-stuib.dtb \ - ste-hrefv60plus-tvk.dtb + ste-hrefv60plus-tvk.dtb \ + ste-href520-tvk.dtb \ + ste-ux500-samsung-golden.dtb dtb-$(CONFIG_ARCH_UNIPHIER) += \ uniphier-ld4-ref.dtb \ uniphier-ld6b-ref.dtb \ @@ -1217,6 +1258,8 @@ dtb-$(CONFIG_MACH_ARMADA_370) += \ dtb-$(CONFIG_MACH_ARMADA_375) += \ armada-375-db.dtb dtb-$(CONFIG_MACH_ARMADA_38X) += \ + armada-385-clearfog-gtr-s4.dtb \ + armada-385-clearfog-gtr-l8.dtb \ armada-385-db-88f6820-amc.dtb \ armada-385-db-ap.dtb \ armada-385-linksys-caiman.dtb \ @@ -1262,25 +1305,34 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \ mt7623a-rfb-nand.dtb \ mt7623n-rfb-emmc.dtb \ mt7623n-bananapi-bpi-r2.dtb \ + mt7629-rfb.dtb \ mt8127-moose.dtb \ mt8135-evbp1.dtb dtb-$(CONFIG_ARCH_MILBEAUT) += milbeaut-m10v-evb.dtb dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-ast2500-evb.dtb \ + aspeed-ast2600-evb.dtb \ aspeed-bmc-arm-centriq2400-rep.dtb \ aspeed-bmc-arm-stardragon4800-rep2.dtb \ aspeed-bmc-facebook-cmm.dtb \ + aspeed-bmc-facebook-minipack.dtb \ aspeed-bmc-facebook-tiogapass.dtb \ + aspeed-bmc-facebook-wedge40.dtb \ + aspeed-bmc-facebook-wedge100.dtb \ aspeed-bmc-facebook-yamp.dtb \ + aspeed-bmc-ibm-rainier.dtb \ aspeed-bmc-intel-s2600wf.dtb \ aspeed-bmc-inspur-fp5280g2.dtb \ aspeed-bmc-lenovo-hr630.dtb \ + aspeed-bmc-lenovo-hr855xg2.dtb \ aspeed-bmc-microsoft-olympus.dtb \ aspeed-bmc-opp-lanyang.dtb \ + aspeed-bmc-opp-mihawk.dtb \ aspeed-bmc-opp-palmetto.dtb \ aspeed-bmc-opp-romulus.dtb \ aspeed-bmc-opp-swift.dtb \ + aspeed-bmc-opp-tacoma.dtb \ aspeed-bmc-opp-vesnin.dtb \ aspeed-bmc-opp-witherspoon.dtb \ aspeed-bmc-opp-zaius.dtb \ diff --git a/arch/arm/boot/dts/am335x-baltos.dtsi b/arch/arm/boot/dts/am335x-baltos.dtsi index ed235f263e29..05e7b5d4a95b 100644 --- a/arch/arm/boot/dts/am335x-baltos.dtsi +++ b/arch/arm/boot/dts/am335x-baltos.dtsi @@ -258,18 +258,6 @@ }; }; -&usb { - status = "okay"; -}; - -&usb_ctrl_mod { - status = "okay"; -}; - -&cppi41dma { - status = "okay"; -}; - #include "tps65910.dtsi" &tps { diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi index 89b4cf2cb7f8..6c9187bc0f17 100644 --- a/arch/arm/boot/dts/am335x-bone-common.dtsi +++ b/arch/arm/boot/dts/am335x-bone-common.dtsi @@ -191,38 +191,16 @@ status = "okay"; }; -&usb { - status = "okay"; -}; - -&usb_ctrl_mod { - status = "okay"; -}; - -&usb0_phy { - status = "okay"; -}; - -&usb1_phy { - status = "okay"; -}; - &usb0 { - status = "okay"; dr_mode = "peripheral"; interrupts-extended = <&intc 18 &tps 0>; interrupt-names = "mc", "vbus"; }; &usb1 { - status = "okay"; dr_mode = "host"; }; -&cppi41dma { - status = "okay"; -}; - &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins>; diff --git a/arch/arm/boot/dts/am335x-boneblack-common.dtsi b/arch/arm/boot/dts/am335x-boneblack-common.dtsi index 7ad079861efd..91f93bc89716 100644 --- a/arch/arm/boot/dts/am335x-boneblack-common.dtsi +++ b/arch/arm/boot/dts/am335x-boneblack-common.dtsi @@ -131,6 +131,11 @@ }; / { + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x20000000>; /* 512 MB */ + }; + clk_mcasp0_fixed: clk_mcasp0_fixed { #clock-cells = <0>; compatible = "fixed-clock"; diff --git a/arch/arm/boot/dts/am335x-boneblue.dts b/arch/arm/boot/dts/am335x-boneblue.dts index 0257576d5d16..5811fb8d4fdf 100644 --- a/arch/arm/boot/dts/am335x-boneblue.dts +++ b/arch/arm/boot/dts/am335x-boneblue.dts @@ -5,23 +5,13 @@ /dts-v1/; #include "am33xx.dtsi" +#include "am335x-osd335x-common.dtsi" #include <dt-bindings/interrupt-controller/irq.h> / { model = "TI AM335x BeagleBone Blue"; compatible = "ti,am335x-bone-blue", "ti,am33xx"; - cpus { - cpu@0 { - cpu0-supply = <&dcdc2_reg>; - }; - }; - - memory@80000000 { - device_type = "memory"; - reg = <0x80000000 0x20000000>; /* 512 MB */ - }; - chosen { stdout-path = &uart0; }; @@ -142,13 +132,6 @@ >; }; - i2c0_pins: pinmux_i2c0_pins { - pinctrl-single,pins = < - AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0) /* (C17) I2C0_SDA.I2C0_SDA */ - AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0) /* (C16) I2C0_SCL.I2C0_SCL */ - >; - }; - i2c2_pins: pinmux_i2c2_pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLUP, MUX_MODE3) /* (D18) uart1_ctsn.I2C2_SDA */ @@ -295,49 +278,17 @@ status = "okay"; }; -&usb { - status = "okay"; -}; - -&usb_ctrl_mod { - status = "okay"; -}; - -&usb0_phy { - status = "okay"; -}; - -&usb1_phy { - status = "okay"; -}; - &usb0 { - status = "okay"; dr_mode = "peripheral"; interrupts-extended = <&intc 18 &tps 0>; interrupt-names = "mc", "vbus"; }; &usb1 { - status = "okay"; dr_mode = "host"; }; -&cppi41dma { - status = "okay"; -}; - &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins>; - - status = "okay"; - clock-frequency = <400000>; - - tps: tps@24 { - reg = <0x24>; - }; - baseboard_eeprom: baseboard_eeprom@50 { compatible = "atmel,24c256"; reg = <0x50>; @@ -381,66 +332,13 @@ /include/ "tps65217.dtsi" &tps { - interrupts = <7>; /* NMI */ - interrupt-parent = <&intc>; + /delete-property/ ti,pmic-shutdown-controller; charger { interrupts = <0>, <1>; interrupt-names = "USB", "AC"; status = "okay"; }; - - pwrbutton { - interrupts = <2>; - status = "okay"; - }; - - regulators { - dcdc1_reg: regulator@0 { - regulator-name = "vdds_dpr"; - regulator-always-on; - }; - - dcdc2_reg: regulator@1 { - /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */ - regulator-name = "vdd_mpu"; - regulator-min-microvolt = <925000>; - regulator-max-microvolt = <1351500>; - regulator-boot-on; - regulator-always-on; - }; - - dcdc3_reg: regulator@2 { - /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */ - regulator-name = "vdd_core"; - regulator-min-microvolt = <925000>; - regulator-max-microvolt = <1150000>; - regulator-boot-on; - regulator-always-on; - }; - - ldo1_reg: regulator@3 { - regulator-name = "vio,vrtc,vdds"; - regulator-always-on; - }; - - ldo2_reg: regulator@4 { - regulator-name = "vdd_3v3aux"; - regulator-always-on; - }; - - ldo3_reg: regulator@5 { - regulator-name = "vdd_1v8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo4_reg: regulator@6 { - regulator-name = "vdd_3v3a"; - regulator-always-on; - }; - }; }; &mmc1 { @@ -502,14 +400,6 @@ }; }; -&aes { - status = "okay"; -}; - -&sham { - status = "okay"; -}; - &rtc { system-power-controller; clocks = <&clk_32768_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>; diff --git a/arch/arm/boot/dts/am335x-chiliboard.dts b/arch/arm/boot/dts/am335x-chiliboard.dts index 8cd81dc0cc72..b14a2759c69b 100644 --- a/arch/arm/boot/dts/am335x-chiliboard.dts +++ b/arch/arm/boot/dts/am335x-chiliboard.dts @@ -153,30 +153,12 @@ }; /* USB */ -&usb { - status = "okay"; -}; - -&usb_ctrl_mod { - status = "okay"; -}; - -&usb1_phy { - status = "okay"; -}; - &usb1 { pinctrl-names = "default"; pinctrl-0 = <&usb1_drvvbus>; - - status = "okay"; dr_mode = "host"; }; -&cppi41dma { - status = "okay"; -}; - /* microSD */ &mmc1 { pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/am335x-cm-t335.dts b/arch/arm/boot/dts/am335x-cm-t335.dts index ceecbfd29d2c..c6fe9db660e2 100644 --- a/arch/arm/boot/dts/am335x-cm-t335.dts +++ b/arch/arm/boot/dts/am335x-cm-t335.dts @@ -44,7 +44,6 @@ regulator-name = "vwlan_fixed"; gpio = <&gpio0 20 GPIO_ACTIVE_HIGH>; /* gpio0_20 */ enable-active-high; - regulator-boot-off; }; backlight { @@ -331,26 +330,6 @@ status = "okay"; }; }; -&usb { - status = "okay"; -}; - -&usb_ctrl_mod { - status = "okay"; -}; - -&usb0_phy { - status = "okay"; -}; - -&usb0 { - status = "okay"; -}; - -&cppi41dma { - status = "okay"; -}; - &epwmss0 { status = "okay"; diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index a00145705c9b..68252dab32c3 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -113,7 +113,7 @@ }; }; - backlight { + backlight: backlight { compatible = "pwm-backlight"; pwms = <&ecap0 0 50000 0>; brightness-levels = <0 51 53 56 62 75 101 152 255>; @@ -121,35 +121,15 @@ }; panel { - compatible = "ti,tilcdc,panel"; - status = "okay"; + compatible = "tfc,s9700rtwv43tr-01b"; + pinctrl-names = "default"; pinctrl-0 = <&lcd_pins_s0>; - panel-info { - ac-bias = <255>; - ac-bias-intrpt = <0>; - dma-burst-sz = <16>; - bpp = <32>; - fdd = <0x80>; - sync-edge = <0>; - sync-ctrl = <1>; - raster-order = <0>; - fifo-th = <0>; - }; + backlight = <&backlight>; - display-timings { - 800x480p62 { - clock-frequency = <30000000>; - hactive = <800>; - vactive = <480>; - hfront-porch = <39>; - hback-porch = <39>; - hsync-len = <47>; - vback-porch = <29>; - vfront-porch = <13>; - vsync-len = <2>; - hsync-active = <1>; - vsync-active = <1>; + port { + panel_0: endpoint@0 { + remote-endpoint = <&lcdc_0>; }; }; }; @@ -433,35 +413,10 @@ }; }; -&usb { - status = "okay"; -}; - -&usb_ctrl_mod { - status = "okay"; -}; - -&usb0_phy { - status = "okay"; -}; - -&usb1_phy { - status = "okay"; -}; - -&usb0 { - status = "okay"; -}; - &usb1 { - status = "okay"; dr_mode = "host"; }; -&cppi41dma { - status = "okay"; -}; - &i2c1 { pinctrl-names = "default"; pinctrl-0 = <&i2c1_pins>; @@ -525,6 +480,12 @@ status = "okay"; blue-and-red-wiring = "crossed"; + + port { + lcdc_0: endpoint@0 { + remote-endpoint = <&panel_0>; + }; + }; }; &elm { diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts index e28a5b82fdf3..32f515a295ee 100644 --- a/arch/arm/boot/dts/am335x-evmsk.dts +++ b/arch/arm/boot/dts/am335x-evmsk.dts @@ -183,36 +183,16 @@ }; panel { - compatible = "ti,tilcdc,panel"; + compatible = "newhaven,nhd-4.3-480272ef-atxl"; + pinctrl-names = "default", "sleep"; pinctrl-0 = <&lcd_pins_default>; pinctrl-1 = <&lcd_pins_sleep>; backlight = <&lcd_bl>; - status = "okay"; - panel-info { - ac-bias = <255>; - ac-bias-intrpt = <0>; - dma-burst-sz = <16>; - bpp = <32>; - fdd = <0x80>; - sync-edge = <0>; - sync-ctrl = <1>; - raster-order = <0>; - fifo-th = <0>; - }; - display-timings { - 480x272 { - hactive = <480>; - vactive = <272>; - hback-porch = <43>; - hfront-porch = <8>; - hsync-len = <4>; - vback-porch = <12>; - vfront-porch = <4>; - vsync-len = <10>; - clock-frequency = <9000000>; - hsync-active = <0>; - vsync-active = <0>; + + port { + panel_0: endpoint@0 { + remote-endpoint = <&lcdc_0>; }; }; }; @@ -523,35 +503,10 @@ }; }; -&usb { - status = "okay"; -}; - -&usb_ctrl_mod { - status = "okay"; -}; - -&usb0_phy { - status = "okay"; -}; - -&usb1_phy { - status = "okay"; -}; - -&usb0 { - status = "okay"; -}; - &usb1 { - status = "okay"; dr_mode = "host"; }; -&cppi41dma { - status = "okay"; -}; - &epwmss2 { status = "okay"; @@ -750,6 +705,12 @@ status = "okay"; blue-and-red-wiring = "crossed"; + + port { + lcdc_0: endpoint@0 { + remote-endpoint = <&panel_0>; + }; + }; }; &rtc { diff --git a/arch/arm/boot/dts/am335x-guardian.dts b/arch/arm/boot/dts/am335x-guardian.dts index c9611ea4b884..81e0f63e94d3 100644 --- a/arch/arm/boot/dts/am335x-guardian.dts +++ b/arch/arm/boot/dts/am335x-guardian.dts @@ -115,10 +115,6 @@ }; }; -&cppi41dma { - status = "okay"; -}; - &elm { status = "okay"; }; @@ -328,30 +324,12 @@ status = "okay"; }; -&usb { - status = "okay"; -}; - -&usb_ctrl_mod { - status = "okay"; -}; - &usb0 { dr_mode = "peripheral"; - status = "okay"; -}; - -&usb0_phy { - status = "okay"; }; &usb1 { dr_mode = "host"; - status = "okay"; -}; - -&usb1_phy { - status = "okay"; }; &am33xx_pinmux { diff --git a/arch/arm/boot/dts/am335x-icev2.dts b/arch/arm/boot/dts/am335x-icev2.dts index 18f70b35da4c..021eb57261fe 100644 --- a/arch/arm/boot/dts/am335x-icev2.dts +++ b/arch/arm/boot/dts/am335x-icev2.dts @@ -287,6 +287,19 @@ gpio-controller; #gpio-cells = <2>; }; + + /* osd9616p0899-10 */ + display@3c { + compatible = "solomon,ssd1306fb-i2c"; + reg = <0x3c>; + solomon,height = <16>; + solomon,width = <96>; + solomon,com-seq; + solomon,com-invdir; + solomon,page-offset = <0>; + solomon,prechargep1 = <2>; + solomon,prechargep2 = <13>; + }; }; &spi0 { @@ -432,7 +445,7 @@ pinctrl-0 = <&mmc0_pins_default>; }; -&gpio0 { +&gpio0_target { /* Do not idle the GPIO used for holding the VTT regulator */ ti,no-reset-on-init; ti,no-idle-on-init; diff --git a/arch/arm/boot/dts/am335x-igep0033.dtsi b/arch/arm/boot/dts/am335x-igep0033.dtsi index eabcc8b2e4ea..c9f354fc984a 100644 --- a/arch/arm/boot/dts/am335x-igep0033.dtsi +++ b/arch/arm/boot/dts/am335x-igep0033.dtsi @@ -217,35 +217,10 @@ pinctrl-0 = <&uart0_pins>; }; -&usb { - status = "okay"; -}; - -&usb_ctrl_mod { - status = "okay"; -}; - -&usb0_phy { - status = "okay"; -}; - -&usb1_phy { - status = "okay"; -}; - -&usb0 { - status = "okay"; -}; - &usb1 { - status = "okay"; dr_mode = "host"; }; -&cppi41dma { - status = "okay"; -}; - #include "tps65910.dtsi" &tps { diff --git a/arch/arm/boot/dts/am335x-lxm.dts b/arch/arm/boot/dts/am335x-lxm.dts index a8005e975ea2..fef582852820 100644 --- a/arch/arm/boot/dts/am335x-lxm.dts +++ b/arch/arm/boot/dts/am335x-lxm.dts @@ -283,36 +283,14 @@ status = "okay"; }; -&usb { - status = "okay"; -}; - -&usb_ctrl_mod { - status = "okay"; -}; - -&usb0_phy { - status = "okay"; -}; - -&usb1_phy { - status = "okay"; -}; - &usb0 { - status = "okay"; dr_mode = "host"; }; &usb1 { - status = "okay"; dr_mode = "host"; }; -&cppi41dma { - status = "okay"; -}; - &cpsw_emac0 { phy-handle = <ðphy0>; phy-mode = "rmii"; diff --git a/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi b/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi index 671d4a5da9c4..6495a125c01f 100644 --- a/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi +++ b/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi @@ -111,27 +111,10 @@ }; }; -&usb { - status = "okay"; -}; - -&usb_ctrl_mod { - status = "okay"; -}; - -&usb0_phy { - status = "okay"; -}; - &usb0 { - status = "okay"; dr_mode = "host"; }; -&cppi41dma { - status = "okay"; -}; - /* Power */ &vbat { regulator-name = "vbat"; diff --git a/arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts b/arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts index 783d411f2cef..244df9c5a537 100644 --- a/arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts +++ b/arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts @@ -290,36 +290,14 @@ }; }; -&usb { - status = "okay"; -}; - -&usb_ctrl_mod { - status = "okay"; -}; - -&usb0_phy { - status = "okay"; -}; - -&usb1_phy { - status = "okay"; -}; - &usb0 { - status = "okay"; dr_mode = "host"; }; &usb1 { - status = "okay"; dr_mode = "host"; }; -&cppi41dma { - status = "okay"; -}; - #include "tps65910.dtsi" &tps { diff --git a/arch/arm/boot/dts/am335x-netcan-plus-1xx.dts b/arch/arm/boot/dts/am335x-netcan-plus-1xx.dts new file mode 100644 index 000000000000..1e4dbc85c120 --- /dev/null +++ b/arch/arm/boot/dts/am335x-netcan-plus-1xx.dts @@ -0,0 +1,87 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + */ + +/* + * VScom OnRISC + * http://www.vscom.de + */ + +/dts-v1/; + +#include "am335x-baltos.dtsi" +#include "am335x-baltos-leds.dtsi" + +/ { + model = "NetCAN"; + + leds { + pinctrl-names = "default"; + pinctrl-0 = <&user_leds_s0>; + + compatible = "gpio-leds"; + + led@1 { + label = "can_data"; + linux,default-trigger = "netdev"; + gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + led@2 { + label = "can_error"; + gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + }; +}; + +&am33xx_pinmux { + user_leds_s0: user_leds_s0 { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* CAN Data LED */ + AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* CAN Error LED */ + >; + }; + + dcan1_pins: pinmux_dcan1_pins { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT, MUX_MODE2) /* CAN TX */ + AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT, MUX_MODE2) /* CAN RX */ + >; + }; +}; + +&usb0_phy { + status = "okay"; +}; + +&usb0 { + status = "okay"; + dr_mode = "host"; +}; + +&davinci_mdio { + phy0: ethernet-phy@0 { + reg = <1>; + }; +}; + +&cpsw_emac0 { + phy-mode = "rmii"; + dual_emac_res_vlan = <1>; + phy-handle = <&phy0>; +}; + +&cpsw_emac1 { + phy-mode = "rgmii-id"; + dual_emac_res_vlan = <2>; + phy-handle = <&phy1>; +}; + +&dcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&dcan1_pins>; + + status = "okay"; +}; diff --git a/arch/arm/boot/dts/am335x-netcom-plus-2xx.dts b/arch/arm/boot/dts/am335x-netcom-plus-2xx.dts new file mode 100644 index 000000000000..9a6cd8ef821f --- /dev/null +++ b/arch/arm/boot/dts/am335x-netcom-plus-2xx.dts @@ -0,0 +1,95 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + */ + +/* + * VScom OnRISC + * http://www.vscom.de + */ + +/dts-v1/; + +#include "am335x-baltos.dtsi" +#include "am335x-baltos-leds.dtsi" + +/ { + model = "NetCom Plus"; +}; + +&am33xx_pinmux { + uart1_pins: pinmux_uart1_pins { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT, MUX_MODE0) /* RX */ + AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT, MUX_MODE0) /* TX */ + AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE0) /* CTS */ + AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0) /* RTS */ + AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* DTR */ + AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7) /* DSR */ + AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7) /* DCD */ + AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7) /* RI */ + >; + }; + + uart2_pins: pinmux_uart2_pins { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT, MUX_MODE1) /* RX */ + AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT, MUX_MODE1) /* TX */ + AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLDOWN, MUX_MODE2) /* CTS */ + AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* RTS */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* DTR */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLDOWN, MUX_MODE7) /* DSR */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLDOWN, MUX_MODE7) /* DCD */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLDOWN, MUX_MODE7) /* RI */ + >; + }; +}; + +&usb0_phy { + status = "okay"; +}; + +&usb0 { + status = "okay"; + dr_mode = "host"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + dtr-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; + dsr-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>; + dcd-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>; + rng-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>; + + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + dtr-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; + dsr-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; + dcd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; + rng-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + + status = "okay"; +}; + +&davinci_mdio { + phy0: ethernet-phy@0 { + reg = <1>; + }; +}; + +&cpsw_emac0 { + phy-mode = "rmii"; + dual_emac_res_vlan = <1>; + phy-handle = <&phy0>; +}; + +&cpsw_emac1 { + phy-mode = "rgmii-id"; + dual_emac_res_vlan = <2>; + phy-handle = <&phy1>; +}; diff --git a/arch/arm/boot/dts/am335x-netcom-plus-8xx.dts b/arch/arm/boot/dts/am335x-netcom-plus-8xx.dts new file mode 100644 index 000000000000..2298563f7334 --- /dev/null +++ b/arch/arm/boot/dts/am335x-netcom-plus-8xx.dts @@ -0,0 +1,115 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + */ + +/* + * VScom OnRISC + * http://www.vscom.de + */ + +/dts-v1/; + +#include "am335x-baltos.dtsi" + +/ { + model = "NetCom Plus"; +}; + +&am33xx_pinmux { + pinctrl-names = "default"; + pinctrl-0 = <&dip_switches>; + + dip_switches: pinmux_dip_switches { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLDOWN, MUX_MODE7) + >; + }; + + tca6416_pins: pinmux_tca6416_pins { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_INPUT_PULLUP, MUX_MODE7) + >; + }; + + i2c2_pins: pinmux_i2c2_pins { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE3) + AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT_PULLDOWN, MUX_MODE3) + >; + }; +}; + +&usb0_phy { + status = "okay"; +}; + +&usb1_phy { + status = "okay"; +}; + +&usb0 { + status = "okay"; + dr_mode = "host"; +}; + +&usb1 { + status = "okay"; + dr_mode = "host"; +}; + +&i2c1 { + tca6416a: gpio@20 { + compatible = "ti,tca6416"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gpio0>; + interrupts = <20 IRQ_TYPE_EDGE_RISING>; + pinctrl-names = "default"; + pinctrl-0 = <&tca6416_pins>; + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + + status = "okay"; + clock-frequency = <400000>; + + tca6416b: gpio@20 { + compatible = "ti,tca6416"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; + + tca6416c: gpio@21 { + compatible = "ti,tca6416"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + }; +}; + +&davinci_mdio { + phy0: ethernet-phy@0 { + reg = <1>; + }; +}; + +&cpsw_emac0 { + phy-mode = "rmii"; + dual_emac_res_vlan = <1>; + phy-handle = <&phy0>; +}; + +&cpsw_emac1 { + phy-mode = "rgmii-id"; + dual_emac_res_vlan = <2>; + phy-handle = <&phy1>; +}; diff --git a/arch/arm/boot/dts/am335x-osd3358-sm-red.dts b/arch/arm/boot/dts/am335x-osd3358-sm-red.dts index f47cc9fea253..1d2902083483 100644 --- a/arch/arm/boot/dts/am335x-osd3358-sm-red.dts +++ b/arch/arm/boot/dts/am335x-osd3358-sm-red.dts @@ -384,38 +384,16 @@ status = "okay"; }; -&usb { - status = "okay"; -}; - -&usb_ctrl_mod { - status = "okay"; -}; - -&usb0_phy { - status = "okay"; -}; - -&usb1_phy { - status = "okay"; -}; - &usb0 { - status = "okay"; dr_mode = "peripheral"; interrupts-extended = <&intc 18 &tps 0>; interrupt-names = "mc", "vbus"; }; &usb1 { - status = "okay"; dr_mode = "host"; }; -&cppi41dma { - status = "okay"; -}; - &i2c2 { pinctrl-names = "default"; pinctrl-0 = <&i2c2_pins>; diff --git a/arch/arm/boot/dts/am335x-pcm-953.dtsi b/arch/arm/boot/dts/am335x-pcm-953.dtsi index 9bfa032bcada..6c547c83e5dd 100644 --- a/arch/arm/boot/dts/am335x-pcm-953.dtsi +++ b/arch/arm/boot/dts/am335x-pcm-953.dtsi @@ -237,31 +237,6 @@ }; /* USB */ -&cppi41dma { - status = "okay"; -}; - -&usb_ctrl_mod { - status = "okay"; -}; - -&usb { - status = "okay"; -}; - -&usb0 { - status = "okay"; -}; - -&usb0_phy { - status = "okay"; -}; - &usb1 { - status = "okay"; dr_mode = "host"; }; - -&usb1_phy { - status = "okay"; -}; diff --git a/arch/arm/boot/dts/am335x-pdu001.dts b/arch/arm/boot/dts/am335x-pdu001.dts index 3141255f72c2..e4dcfa087a1b 100644 --- a/arch/arm/boot/dts/am335x-pdu001.dts +++ b/arch/arm/boot/dts/am335x-pdu001.dts @@ -384,34 +384,6 @@ }; }; -&usb { - status = "okay"; -}; - -&usb_ctrl_mod { - status = "okay"; -}; - -&usb0_phy { - status = "okay"; -}; - -&usb1_phy { - status = "okay"; -}; - -&usb0 { - status = "okay"; -}; - -&usb1 { - status = "okay"; -}; - -&cppi41dma { - status = "okay"; -}; - /* * Disable soc's rtc as we have no VBAT for it. This makes the board * rtc (Microchip MCP79400) the default rtc device 'rtc0'. diff --git a/arch/arm/boot/dts/am335x-pepper.dts b/arch/arm/boot/dts/am335x-pepper.dts index e7764ecdf65f..6d7608d9377b 100644 --- a/arch/arm/boot/dts/am335x-pepper.dts +++ b/arch/arm/boot/dts/am335x-pepper.dts @@ -552,38 +552,18 @@ /* USB */ &usb { - status = "okay"; - pinctrl-names = "default"; pinctrl-0 = <&usb_pins>; }; -&usb_ctrl_mod { - status = "okay"; -}; - -&usb0_phy { - status = "okay"; -}; - -&usb1_phy { - status = "okay"; -}; - &usb0 { - status = "okay"; dr_mode = "host"; }; &usb1 { - status = "okay"; dr_mode = "host"; }; -&cppi41dma { - status = "okay"; -}; - &am33xx_pinmux { usb_pins: pinmux_usb { pinctrl-single,pins = < diff --git a/arch/arm/boot/dts/am335x-pocketbeagle.dts b/arch/arm/boot/dts/am335x-pocketbeagle.dts index ff4f919d22f6..4da719098028 100644 --- a/arch/arm/boot/dts/am335x-pocketbeagle.dts +++ b/arch/arm/boot/dts/am335x-pocketbeagle.dts @@ -206,32 +206,10 @@ status = "okay"; }; -&usb { - status = "okay"; -}; - -&usb_ctrl_mod { - status = "okay"; -}; - -&usb0_phy { - status = "okay"; -}; - &usb0 { - status = "okay"; dr_mode = "otg"; }; -&usb1_phy { - status = "okay"; -}; - &usb1 { - status = "okay"; dr_mode = "host"; }; - -&cppi41dma { - status = "okay"; -}; diff --git a/arch/arm/boot/dts/am335x-regor.dtsi b/arch/arm/boot/dts/am335x-regor.dtsi index 5aff02a95766..6fbf4ac739e7 100644 --- a/arch/arm/boot/dts/am335x-regor.dtsi +++ b/arch/arm/boot/dts/am335x-regor.dtsi @@ -200,24 +200,3 @@ status = "okay"; linux,rs485-enabled-at-boot-time; }; - -/* USB */ -&cppi41dma { - status = "okay"; -}; - -&usb_ctrl_mod { - status = "okay"; -}; - -&usb { - status = "okay"; -}; - -&usb0 { - status = "okay"; -}; - -&usb0_phy { - status = "okay"; -}; diff --git a/arch/arm/boot/dts/am335x-sancloud-bbe.dts b/arch/arm/boot/dts/am335x-sancloud-bbe.dts index 8678e6e35493..e5fdb7abb0d5 100644 --- a/arch/arm/boot/dts/am335x-sancloud-bbe.dts +++ b/arch/arm/boot/dts/am335x-sancloud-bbe.dts @@ -108,7 +108,7 @@ &cpsw_emac0 { phy-handle = <ðphy0>; - phy-mode = "rgmii-txid"; + phy-mode = "rgmii-id"; }; &i2c0 { diff --git a/arch/arm/boot/dts/am335x-shc.dts b/arch/arm/boot/dts/am335x-shc.dts index 5b0368504015..1eaa26533466 100644 --- a/arch/arm/boot/dts/am335x-shc.dts +++ b/arch/arm/boot/dts/am335x-shc.dts @@ -117,10 +117,6 @@ status = "okay"; }; -&cppi41dma { - status = "okay"; -}; - &davinci_mdio { pinctrl-names = "default", "sleep"; pinctrl-0 = <&davinci_mdio_default>; @@ -358,20 +354,7 @@ status = "okay"; }; -&usb { - status = "okay"; -}; - -&usb_ctrl_mod { - status = "okay"; -}; - -&usb1_phy { - status = "okay"; -}; - &usb1 { - status = "okay"; dr_mode = "host"; }; diff --git a/arch/arm/boot/dts/am335x-sl50.dts b/arch/arm/boot/dts/am335x-sl50.dts index 2f82095e7210..f4684c8eaffe 100644 --- a/arch/arm/boot/dts/am335x-sl50.dts +++ b/arch/arm/boot/dts/am335x-sl50.dts @@ -512,36 +512,14 @@ status = "disabled"; }; -&usb { - status = "okay"; -}; - -&usb_ctrl_mod { - status = "okay"; -}; - -&usb0_phy { - status = "okay"; -}; - -&usb1_phy { - status = "okay"; -}; - &usb0 { - status = "okay"; dr_mode = "otg"; }; &usb1 { - status = "okay"; dr_mode = "host"; }; -&cppi41dma { - status = "okay"; -}; - &mmc1 { status = "okay"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/am335x-wega.dtsi b/arch/arm/boot/dts/am335x-wega.dtsi index 61fc4cd2d164..1359bf8715e6 100644 --- a/arch/arm/boot/dts/am335x-wega.dtsi +++ b/arch/arm/boot/dts/am335x-wega.dtsi @@ -191,32 +191,6 @@ status = "okay"; }; -/* USB */ -&cppi41dma { - status = "okay"; -}; - -&usb_ctrl_mod { - status = "okay"; -}; - -&usb { - status = "okay"; -}; - -&usb0 { - status = "okay"; -}; - -&usb0_phy { - status = "okay"; -}; - &usb1 { dr_mode = "host"; - status = "okay"; -}; - -&usb1_phy { - status = "okay"; }; diff --git a/arch/arm/boot/dts/am33xx-l4.dtsi b/arch/arm/boot/dts/am33xx-l4.dtsi index ced1a19d5f89..4e2986f0c604 100644 --- a/arch/arm/boot/dts/am33xx-l4.dtsi +++ b/arch/arm/boot/dts/am33xx-l4.dtsi @@ -127,9 +127,8 @@ ranges = <0x0 0x5000 0x1000>; }; - target-module@7000 { /* 0x44e07000, ap 14 20.0 */ + gpio0_target: target-module@7000 { /* 0x44e07000, ap 14 20.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "gpio1"; reg = <0x7000 0x4>, <0x7010 0x4>, <0x7114 0x4>; @@ -163,7 +162,6 @@ target-module@9000 { /* 0x44e09000, ap 16 04.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "uart1"; reg = <0x9050 0x4>, <0x9054 0x4>, <0x9058 0x4>; @@ -185,7 +183,7 @@ uart0: serial@0 { compatible = "ti,am3352-uart", "ti,omap3-uart"; clock-frequency = <48000000>; - reg = <0x0 0x2000>; + reg = <0x0 0x1000>; interrupts = <72>; status = "disabled"; dmas = <&edma 26 0>, <&edma 27 0>; @@ -195,7 +193,6 @@ target-module@b000 { /* 0x44e0b000, ap 18 48.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "i2c1"; reg = <0xb000 0x8>, <0xb010 0x8>, <0xb090 0x8>; @@ -228,7 +225,6 @@ target-module@d000 { /* 0x44e0d000, ap 20 38.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "adc_tsc"; reg = <0xd000 0x4>, <0xd010 0x4>; reg-names = "rev", "sysc"; @@ -306,6 +302,13 @@ }; }; + usb_ctrl_mod: control@620 { + compatible = "ti,am335x-usb-ctrl-module"; + reg = <0x620 0x10>, + <0x648 0x4>; + reg-names = "phy_ctrl", "wakeup"; + }; + wkup_m3_ipc: wkup_m3_ipc@1324 { compatible = "ti,am3352-wkup-m3-ipc"; reg = <0x1324 0x24>; @@ -368,7 +371,6 @@ target-module@35000 { /* 0x44e35000, ap 29 50.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "wd_timer2"; reg = <0x35000 0x4>, <0x35010 0x4>, <0x35014 0x4>; @@ -673,7 +675,6 @@ target-module@100000 { /* 0x4a100000, ap 3 08.0 */ compatible = "ti,sysc-omap4-simple", "ti,sysc"; - ti,hwmods = "cpgmac0"; reg = <0x101200 0x4>, <0x101208 0x4>, <0x101204 0x4>; @@ -719,9 +720,10 @@ davinci_mdio: mdio@1000 { compatible = "ti,cpsw-mdio","ti,davinci_mdio"; + clocks = <&cpsw_125mhz_clkctrl AM3_CPSW_125MHZ_CPGMAC0_CLKCTRL 0>; + clock-names = "fck"; #address-cells = <1>; #size-cells = <0>; - ti,hwmods = "davinci_mdio"; bus_freq = <1000000>; reg = <0x1000 0x100>; status = "disabled"; @@ -912,7 +914,6 @@ target-module@22000 { /* 0x48022000, ap 10 12.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "uart2"; reg = <0x22050 0x4>, <0x22054 0x4>, <0x22058 0x4>; @@ -934,7 +935,7 @@ uart1: serial@0 { compatible = "ti,am3352-uart", "ti,omap3-uart"; clock-frequency = <48000000>; - reg = <0x0 0x2000>; + reg = <0x0 0x1000>; interrupts = <73>; status = "disabled"; dmas = <&edma 28 0>, <&edma 29 0>; @@ -944,7 +945,6 @@ target-module@24000 { /* 0x48024000, ap 12 14.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "uart3"; reg = <0x24050 0x4>, <0x24054 0x4>, <0x24058 0x4>; @@ -966,7 +966,7 @@ uart2: serial@0 { compatible = "ti,am3352-uart", "ti,omap3-uart"; clock-frequency = <48000000>; - reg = <0x0 0x2000>; + reg = <0x0 0x1000>; interrupts = <74>; status = "disabled"; dmas = <&edma 30 0>, <&edma 31 0>; @@ -976,7 +976,6 @@ target-module@2a000 { /* 0x4802a000, ap 14 2a.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "i2c2"; reg = <0x2a000 0x8>, <0x2a010 0x8>, <0x2a090 0x8>; @@ -1009,7 +1008,6 @@ target-module@30000 { /* 0x48030000, ap 77 08.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "spi0"; reg = <0x30000 0x4>, <0x30110 0x4>, <0x30114 0x4>; @@ -1046,7 +1044,6 @@ target-module@38000 { /* 0x48038000, ap 16 02.0 */ compatible = "ti,sysc-omap4-simple", "ti,sysc"; - ti,hwmods = "mcasp0"; reg = <0x38000 0x4>, <0x38004 0x4>; reg-names = "rev", "sysc"; @@ -1077,7 +1074,6 @@ target-module@3c000 { /* 0x4803c000, ap 20 32.0 */ compatible = "ti,sysc-omap4-simple", "ti,sysc"; - ti,hwmods = "mcasp1"; reg = <0x3c000 0x4>, <0x3c004 0x4>; reg-names = "rev", "sysc"; @@ -1136,7 +1132,6 @@ target-module@42000 { /* 0x48042000, ap 24 1c.0 */ compatible = "ti,sysc-omap4-timer", "ti,sysc"; - ti,hwmods = "timer3"; reg = <0x42000 0x4>, <0x42010 0x4>, <0x42014 0x4>; @@ -1162,7 +1157,6 @@ target-module@44000 { /* 0x48044000, ap 26 26.0 */ compatible = "ti,sysc-omap4-timer", "ti,sysc"; - ti,hwmods = "timer4"; reg = <0x44000 0x4>, <0x44010 0x4>, <0x44014 0x4>; @@ -1189,7 +1183,6 @@ target-module@46000 { /* 0x48046000, ap 28 28.0 */ compatible = "ti,sysc-omap4-timer", "ti,sysc"; - ti,hwmods = "timer5"; reg = <0x46000 0x4>, <0x46010 0x4>, <0x46014 0x4>; @@ -1216,7 +1209,6 @@ target-module@48000 { /* 0x48048000, ap 30 22.0 */ compatible = "ti,sysc-omap4-timer", "ti,sysc"; - ti,hwmods = "timer6"; reg = <0x48000 0x4>, <0x48010 0x4>, <0x48014 0x4>; @@ -1243,7 +1235,6 @@ target-module@4a000 { /* 0x4804a000, ap 85 60.0 */ compatible = "ti,sysc-omap4-timer", "ti,sysc"; - ti,hwmods = "timer7"; reg = <0x4a000 0x4>, <0x4a010 0x4>, <0x4a014 0x4>; @@ -1270,7 +1261,6 @@ target-module@4c000 { /* 0x4804c000, ap 32 36.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "gpio2"; reg = <0x4c000 0x4>, <0x4c010 0x4>, <0x4c114 0x4>; @@ -1312,7 +1302,6 @@ target-module@60000 { /* 0x48060000, ap 36 0c.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "mmc1"; reg = <0x602fc 0x4>, <0x60110 0x4>, <0x60114 0x4>; @@ -1348,7 +1337,6 @@ target-module@80000 { /* 0x48080000, ap 38 18.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "elm"; reg = <0x80000 0x4>, <0x80010 0x4>, <0x80014 0x4>; @@ -1385,7 +1373,6 @@ target-module@c8000 { /* 0x480c8000, ap 87 06.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mailbox"; reg = <0xc8000 0x4>, <0xc8010 0x4>; reg-names = "rev", "sysc"; @@ -1417,7 +1404,6 @@ target-module@ca000 { /* 0x480ca000, ap 91 40.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "spinlock"; reg = <0xca000 0x4>, <0xca010 0x4>, <0xca014 0x4>; @@ -1506,7 +1492,6 @@ target-module@9c000 { /* 0x4819c000, ap 46 5a.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "i2c3"; reg = <0x9c000 0x8>, <0x9c010 0x8>, <0x9c090 0x8>; @@ -1539,7 +1524,6 @@ target-module@a0000 { /* 0x481a0000, ap 79 24.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "spi1"; reg = <0xa0000 0x4>, <0xa0110 0x4>, <0xa0114 0x4>; @@ -1592,7 +1576,6 @@ target-module@a6000 { /* 0x481a6000, ap 48 16.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "uart4"; reg = <0xa6050 0x4>, <0xa6054 0x4>, <0xa6058 0x4>; @@ -1614,7 +1597,7 @@ uart3: serial@0 { compatible = "ti,am3352-uart", "ti,omap3-uart"; clock-frequency = <48000000>; - reg = <0x0 0x2000>; + reg = <0x0 0x1000>; interrupts = <44>; status = "disabled"; }; @@ -1622,7 +1605,6 @@ target-module@a8000 { /* 0x481a8000, ap 50 20.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "uart5"; reg = <0xa8050 0x4>, <0xa8054 0x4>, <0xa8058 0x4>; @@ -1644,7 +1626,7 @@ uart4: serial@0 { compatible = "ti,am3352-uart", "ti,omap3-uart"; clock-frequency = <48000000>; - reg = <0x0 0x2000>; + reg = <0x0 0x1000>; interrupts = <45>; status = "disabled"; }; @@ -1652,7 +1634,6 @@ target-module@aa000 { /* 0x481aa000, ap 52 1a.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "uart6"; reg = <0xaa050 0x4>, <0xaa054 0x4>, <0xaa058 0x4>; @@ -1674,7 +1655,7 @@ uart5: serial@0 { compatible = "ti,am3352-uart", "ti,omap3-uart"; clock-frequency = <48000000>; - reg = <0x0 0x2000>; + reg = <0x0 0x1000>; interrupts = <46>; status = "disabled"; }; @@ -1682,7 +1663,6 @@ target-module@ac000 { /* 0x481ac000, ap 54 38.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "gpio3"; reg = <0xac000 0x4>, <0xac010 0x4>, <0xac114 0x4>; @@ -1716,7 +1696,6 @@ target-module@ae000 { /* 0x481ae000, ap 56 3a.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "gpio4"; reg = <0xae000 0x4>, <0xae010 0x4>, <0xae114 0x4>; @@ -1758,7 +1737,8 @@ target-module@cc000 { /* 0x481cc000, ap 60 46.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "d_can0"; + reg = <0xcc020 0x4>; + reg-names = "rev"; /* Domains (P, C): per_pwrdm, l4ls_clkdm */ clocks = <&l4ls_clkctrl AM3_L4LS_D_CAN0_CLKCTRL 0>, <&dcan0_fck>; @@ -1780,7 +1760,8 @@ target-module@d0000 { /* 0x481d0000, ap 62 42.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "d_can1"; + reg = <0xd0020 0x4>; + reg-names = "rev"; /* Domains (P, C): per_pwrdm, l4ls_clkdm */ clocks = <&l4ls_clkctrl AM3_L4LS_D_CAN1_CLKCTRL 0>, <&dcan1_fck>; @@ -1802,7 +1783,6 @@ target-module@d8000 { /* 0x481d8000, ap 64 66.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "mmc2"; reg = <0xd82fc 0x4>, <0xd8110 0x4>, <0xd8114 0x4>; @@ -1871,7 +1851,6 @@ target-module@0 { /* 0x48300000, ap 66 48.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "epwmss0"; reg = <0x0 0x4>, <0x4 0x4>; reg-names = "rev", "sysc"; @@ -1924,7 +1903,6 @@ target-module@2000 { /* 0x48302000, ap 68 52.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "epwmss1"; reg = <0x2000 0x4>, <0x2004 0x4>; reg-names = "rev", "sysc"; @@ -1977,7 +1955,6 @@ target-module@4000 { /* 0x48304000, ap 70 44.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "epwmss2"; reg = <0x4000 0x4>, <0x4004 0x4>; reg-names = "rev", "sysc"; @@ -2030,11 +2007,12 @@ target-module@e000 { /* 0x4830e000, ap 72 4a.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "lcdc"; reg = <0xe000 0x4>, <0xe054 0x4>; reg-names = "rev", "sysc"; - ti,sysc-midle ; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; ti,sysc-sidle = <SYSC_IDLE_FORCE>, <SYSC_IDLE_NO>, <SYSC_IDLE_SMART>; @@ -2055,7 +2033,6 @@ target-module@10000 { /* 0x48310000, ap 76 4e.1 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "rng"; reg = <0x11fe0 0x4>, <0x11fe4 0x4>; reg-names = "rev", "sysc"; diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index e5c2f71a7c77..41dcfb37155a 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -234,46 +234,66 @@ interrupt-names = "edma3_tcerrint"; }; - mmc3: mmc@47810000 { - compatible = "ti,omap4-hsmmc"; - ti,hwmods = "mmc3"; - ti,needs-special-reset; - interrupts = <29>; - reg = <0x47810000 0x1000>; - status = "disabled"; - }; - - usb: usb@47400000 { - compatible = "ti,am33xx-usb"; - reg = <0x47400000 0x1000>; - ranges; + target-module@47810000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x478102fc 0x4>, + <0x47810110 0x4>, + <0x47810114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + clocks = <&l3s_clkctrl AM3_L3S_MMC3_CLKCTRL 0>; + clock-names = "fck"; #address-cells = <1>; #size-cells = <1>; - ti,hwmods = "usb_otg_hs"; - status = "disabled"; + ranges = <0x0 0x47810000 0x1000>; - usb_ctrl_mod: control@44e10620 { - compatible = "ti,am335x-usb-ctrl-module"; - reg = <0x44e10620 0x10 - 0x44e10648 0x4>; - reg-names = "phy_ctrl", "wakeup"; - status = "disabled"; + mmc3: mmc@0 { + compatible = "ti,omap4-hsmmc"; + ti,needs-special-reset; + interrupts = <29>; + reg = <0x0 0x1000>; }; + }; - usb0_phy: usb-phy@47401300 { + usb: target-module@47400000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x47400000 0x4>, + <0x47400010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP2_SOFTRESET)>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + clocks = <&l3s_clkctrl AM3_L3S_USB_OTG_HS_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x47400000 0x5000>; + + usb0_phy: usb-phy@1300 { compatible = "ti,am335x-usb-phy"; - reg = <0x47401300 0x100>; + reg = <0x1300 0x100>; reg-names = "phy"; - status = "disabled"; ti,ctrl_mod = <&usb_ctrl_mod>; #phy-cells = <0>; }; - usb0: usb@47401000 { + usb0: usb@1400 { compatible = "ti,musb-am33xx"; - status = "disabled"; - reg = <0x47401400 0x400 - 0x47401000 0x200>; + reg = <0x1400 0x400>, + <0x1000 0x200>; reg-names = "mc", "control"; interrupts = <18>; @@ -309,20 +329,18 @@ "tx14", "tx15"; }; - usb1_phy: usb-phy@47401b00 { + usb1_phy: usb-phy@1b00 { compatible = "ti,am335x-usb-phy"; - reg = <0x47401b00 0x100>; + reg = <0x1b00 0x100>; reg-names = "phy"; - status = "disabled"; ti,ctrl_mod = <&usb_ctrl_mod>; #phy-cells = <0>; }; - usb1: usb@47401800 { + usb1: usb@1800 { compatible = "ti,musb-am33xx"; - status = "disabled"; - reg = <0x47401c00 0x400 - 0x47401800 0x200>; + reg = <0x1c00 0x400>, + <0x1800 0x200>; reg-names = "mc", "control"; interrupts = <19>; interrupt-names = "mc"; @@ -357,36 +375,35 @@ "tx14", "tx15"; }; - cppi41dma: dma-controller@47402000 { + cppi41dma: dma-controller@2000 { compatible = "ti,am3359-cppi41"; - reg = <0x47400000 0x1000 - 0x47402000 0x1000 - 0x47403000 0x1000 - 0x47404000 0x4000>; + reg = <0x0000 0x1000>, + <0x2000 0x1000>, + <0x3000 0x1000>, + <0x4000 0x4000>; reg-names = "glue", "controller", "scheduler", "queuemgr"; interrupts = <17>; interrupt-names = "glue"; #dma-cells = <2>; #dma-channels = <30>; #dma-requests = <256>; - status = "disabled"; }; }; - ocmcram: ocmcram@40300000 { + ocmcram: sram@40300000 { compatible = "mmio-sram"; reg = <0x40300000 0x10000>; /* 64k */ ranges = <0x0 0x40300000 0x10000>; #address-cells = <1>; #size-cells = <1>; - pm_sram_code: pm-sram-code@0 { + pm_sram_code: pm-code-sram@0 { compatible = "ti,sram"; reg = <0x0 0x1000>; protect-exec; }; - pm_sram_data: pm-sram-data@1000 { + pm_sram_data: pm-data-sram@1000 { compatible = "ti,sram"; reg = <0x1000 0x1000>; pool; @@ -422,26 +439,116 @@ status = "disabled"; }; - sham: sham@53100000 { - compatible = "ti,omap4-sham"; - ti,hwmods = "sham"; - reg = <0x53100000 0x200>; - interrupts = <109>; - dmas = <&edma 36 0>; - dma-names = "rx"; + sham_target: target-module@53100000 { + compatible = "ti,sysc-omap3-sham", "ti,sysc"; + reg = <0x53100100 0x4>, + <0x53100110 0x4>, + <0x53100114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (P, C): per_pwrdm, l3_clkdm */ + clocks = <&l3_clkctrl AM3_L3_SHAM_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x53100000 0x1000>; + + sham: sham@0 { + compatible = "ti,omap4-sham"; + reg = <0 0x200>; + interrupts = <109>; + dmas = <&edma 36 0>; + dma-names = "rx"; + }; }; - aes: aes@53500000 { - compatible = "ti,omap4-aes"; - ti,hwmods = "aes"; - reg = <0x53500000 0xa0>; - interrupts = <103>; - dmas = <&edma 6 0>, - <&edma 5 0>; - dma-names = "tx", "rx"; + aes_target: target-module@53500000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x53500080 0x4>, + <0x53500084 0x4>, + <0x53500088 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): per_pwrdm, l3_clkdm */ + clocks = <&l3_clkctrl AM3_L3_AES_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x53500000 0x1000>; + + aes: aes@0 { + compatible = "ti,omap4-aes"; + reg = <0 0xa0>; + interrupts = <103>; + dmas = <&edma 6 0>, + <&edma 5 0>; + dma-names = "tx", "rx"; + }; + }; + + target-module@56000000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x5600fe00 0x4>, + <0x5600fe10 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + clocks = <&gfx_l3_clkctrl AM3_GFX_L3_GFX_CLKCTRL 0>; + clock-names = "fck"; + resets = <&prm_gfx 0>; + reset-names = "rstctrl"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x56000000 0x1000000>; + + /* + * Closed source PowerVR driver, no child device + * binding or driver in mainline + */ }; }; }; #include "am33xx-l4.dtsi" #include "am33xx-clocks.dtsi" + +&prcm { + prm_per: prm@c00 { + compatible = "ti,am3-prm-inst", "ti,omap-prm-inst"; + reg = <0xc00 0x100>; + #reset-cells = <1>; + }; + + prm_wkup: prm@d00 { + compatible = "ti,am3-prm-inst", "ti,omap-prm-inst"; + reg = <0xd00 0x100>; + #reset-cells = <1>; + }; + + prm_device: prm@f00 { + compatible = "ti,am3-prm-inst", "ti,omap-prm-inst"; + reg = <0xf00 0x100>; + #reset-cells = <1>; + }; + + prm_gfx: prm@1100 { + compatible = "ti,am3-prm-inst", "ti,omap-prm-inst"; + reg = <0x1100 0x100>; + #reset-cells = <1>; + }; +}; diff --git a/arch/arm/boot/dts/am3517-evm.dts b/arch/arm/boot/dts/am3517-evm.dts index ebfe28c2f544..a1fd3e63e86e 100644 --- a/arch/arm/boot/dts/am3517-evm.dts +++ b/arch/arm/boot/dts/am3517-evm.dts @@ -124,10 +124,11 @@ }; lcd0: display@0 { - compatible = "panel-dpi"; + /* This isn't the exact LCD, but the timings meet spec */ + /* To make it work, set CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=4 */ + compatible = "newhaven,nhd-4.3-480272ef-atxl"; label = "15"; - status = "okay"; - pinctrl-names = "default"; + backlight = <&bl>; enable-gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>; /* gpio176, lcd INI */ vcc-supply = <&vdd_io_reg>; @@ -136,22 +137,6 @@ remote-endpoint = <&dpi_out>; }; }; - - panel-timing { - clock-frequency = <9000000>; - hactive = <480>; - vactive = <272>; - hfront-porch = <3>; - hback-porch = <2>; - hsync-len = <42>; - vback-porch = <3>; - vfront-porch = <4>; - vsync-len = <11>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; }; bl: backlight { diff --git a/arch/arm/boot/dts/am3517.dtsi b/arch/arm/boot/dts/am3517.dtsi index 23ea381d363f..e0b5a00e2078 100644 --- a/arch/arm/boot/dts/am3517.dtsi +++ b/arch/arm/boot/dts/am3517.dtsi @@ -16,6 +16,37 @@ can = &hecc; }; + cpus { + cpu: cpu@0 { + /* Based on OMAP3630 variants OPP50 and OPP100 */ + operating-points-v2 = <&cpu0_opp_table>; + + clock-latency = <300000>; /* From legacy driver */ + }; + }; + + cpu0_opp_table: opp-table { + compatible = "operating-points-v2-ti-cpu"; + syscon = <&scm_conf>; + /* + * AM3517 TRM only lists 600MHz @ 1.2V, but omap36xx + * appear to operate at 300MHz as well. Since AM3517 only + * lists one operating voltage, it will remain fixed at 1.2V + */ + opp50-300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-microvolt = <1200000>; + opp-supported-hw = <0xffffffff 0xffffffff>; + opp-suspend; + }; + + opp100-600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <1200000>; + opp-supported-hw = <0xffffffff 0xffffffff>; + }; + }; + ocp@68000000 { am35x_otg_hs: am35x_otg_hs@5c040000 { compatible = "ti,omap3-musb"; @@ -43,7 +74,7 @@ clock-names = "ick"; }; - davinci_mdio: ethernet@5c030000 { + davinci_mdio: mdio@5c030000 { compatible = "ti,davinci_mdio"; ti,hwmods = "davinci_mdio"; status = "disabled"; @@ -88,9 +119,39 @@ interrupts = <24>; clocks = <&hecc_ck>; }; + + /* + * On am3517 the OCP registers do not seem to be accessible + * similar to the omap34xx. Maybe SGX is permanently set to + * "OCP bypass mode", or maybe there is OCP_SYSCONFIG that is + * write-only at 0x50000e10. We detect SGX based on the SGX + * revision register instead of the unreadable OCP revision + * register. + */ + sgx_module: target-module@50000000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x50000014 0x4>; + reg-names = "rev"; + clocks = <&sgx_fck>, <&sgx_ick>; + clock-names = "fck", "ick"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x50000000 0x4000>; + + /* + * Closed source PowerVR driver, no child device + * binding or driver in mainline + */ + }; }; }; +/* Not currently working, probably needs at least different clocks */ +&rng_target { + status = "disabled"; + /delete-property/ clocks; +}; + /* Table Table 5-79 of the TRM shows 480ab000 is reserved */ &usb_otg_hs { status = "disabled"; diff --git a/arch/arm/boot/dts/am3517_mt_ventoux.dts b/arch/arm/boot/dts/am3517_mt_ventoux.dts index e507e4ae0d88..e7d7124a34ba 100644 --- a/arch/arm/boot/dts/am3517_mt_ventoux.dts +++ b/arch/arm/boot/dts/am3517_mt_ventoux.dts @@ -8,7 +8,7 @@ / { model = "TeeJet Mt.Ventoux"; - compatible = "teejet,mt_ventoux", "ti,omap3"; + compatible = "teejet,mt_ventoux", "ti,am3517", "ti,omap3"; memory@80000000 { device_type = "memory"; diff --git a/arch/arm/boot/dts/am3703.dtsi b/arch/arm/boot/dts/am3703.dtsi new file mode 100644 index 000000000000..2b994ae790c9 --- /dev/null +++ b/arch/arm/boot/dts/am3703.dtsi @@ -0,0 +1,14 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2020 AndrĂ© Hentschel <nerv@dawncrow.de> + */ + +#include "omap36xx.dtsi" + +&iva { + status = "disabled"; +}; + +&sgx_module { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/am3715.dtsi b/arch/arm/boot/dts/am3715.dtsi new file mode 100644 index 000000000000..ab328e8c0bd8 --- /dev/null +++ b/arch/arm/boot/dts/am3715.dtsi @@ -0,0 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2020 AndrĂ© Hentschel <nerv@dawncrow.de> + */ + +#include "omap36xx.dtsi" + +&iva { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/am3874-iceboard.dts b/arch/arm/boot/dts/am3874-iceboard.dts index 883fb85135d4..1b4b2b0500e4 100644 --- a/arch/arm/boot/dts/am3874-iceboard.dts +++ b/arch/arm/boot/dts/am3874-iceboard.dts @@ -111,13 +111,13 @@ reg = <0x70>; #address-cells = <1>; #size-cells = <0>; + i2c-mux-idle-disconnect; i2c@0 { /* FMC A */ #address-cells = <1>; #size-cells = <0>; reg = <0>; - i2c-mux-idle-disconnect; }; i2c@1 { @@ -125,7 +125,6 @@ #address-cells = <1>; #size-cells = <0>; reg = <1>; - i2c-mux-idle-disconnect; }; i2c@2 { @@ -133,7 +132,6 @@ #address-cells = <1>; #size-cells = <0>; reg = <2>; - i2c-mux-idle-disconnect; }; i2c@3 { @@ -141,7 +139,6 @@ #address-cells = <1>; #size-cells = <0>; reg = <3>; - i2c-mux-idle-disconnect; }; i2c@4 { @@ -149,14 +146,12 @@ #address-cells = <1>; #size-cells = <0>; reg = <4>; - i2c-mux-idle-disconnect; }; i2c@5 { #address-cells = <1>; #size-cells = <0>; reg = <5>; - i2c-mux-idle-disconnect; ina230@40 { compatible = "ti,ina230"; reg = <0x40>; shunt-resistor = <5000>; }; ina230@41 { compatible = "ti,ina230"; reg = <0x41>; shunt-resistor = <5000>; }; @@ -182,14 +177,12 @@ #address-cells = <1>; #size-cells = <0>; reg = <6>; - i2c-mux-idle-disconnect; }; i2c@7 { #address-cells = <1>; #size-cells = <0>; reg = <7>; - i2c-mux-idle-disconnect; u41: pca9575@20 { compatible = "nxp,pca9575"; diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index 55aff4db9c7c..faa14dc0faff 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -228,42 +228,120 @@ interrupt-names = "edma3_tcerrint"; }; - mmc3: mmc@47810000 { - compatible = "ti,omap4-hsmmc"; - reg = <0x47810000 0x1000>; - ti,hwmods = "mmc3"; - ti,needs-special-reset; - interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; + target-module@47810000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x478102fc 0x4>, + <0x47810110 0x4>, + <0x47810114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + clocks = <&l3s_clkctrl AM4_L3S_MMC3_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x47810000 0x1000>; + + mmc3: mmc@0 { + compatible = "ti,omap4-hsmmc"; + ti,needs-special-reset; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x1000>; + }; }; - sham: sham@53100000 { - compatible = "ti,omap5-sham"; - ti,hwmods = "sham"; - reg = <0x53100000 0x300>; - dmas = <&edma 36 0>; - dma-names = "rx"; - interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + sham_target: target-module@53100000 { + compatible = "ti,sysc-omap3-sham", "ti,sysc"; + reg = <0x53100100 0x4>, + <0x53100110 0x4>, + <0x53100114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (P, C): per_pwrdm, l3_clkdm */ + clocks = <&l3_clkctrl AM4_L3_SHAM_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x53100000 0x1000>; + + sham: sham@0 { + compatible = "ti,omap5-sham"; + reg = <0 0x300>; + dmas = <&edma 36 0>; + dma-names = "rx"; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + }; }; - aes: aes@53501000 { - compatible = "ti,omap4-aes"; - ti,hwmods = "aes"; - reg = <0x53501000 0xa0>; - interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&edma 6 0>, - <&edma 5 0>; - dma-names = "tx", "rx"; + aes_target: target-module@53501000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x53501080 0x4>, + <0x53501084 0x4>, + <0x53501088 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): per_pwrdm, l3_clkdm */ + clocks = <&l3_clkctrl AM4_L3_AES_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x53501000 0x1000>; + + aes: aes@0 { + compatible = "ti,omap4-aes"; + reg = <0 0xa0>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&edma 6 0>, + <&edma 5 0>; + dma-names = "tx", "rx"; + }; }; - des: des@53701000 { - compatible = "ti,omap4-des"; - ti,hwmods = "des"; - reg = <0x53701000 0xa0>; - interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&edma 34 0>, - <&edma 33 0>; - dma-names = "tx", "rx"; + des_target: target-module@53701000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x53701030 0x4>, + <0x53701034 0x4>, + <0x53701038 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): per_pwrdm, l3_clkdm */ + clocks = <&l3_clkctrl AM4_L3_DES_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x53701000 0x1000>; + + des: des@0 { + compatible = "ti,omap4-des"; + reg = <0 0xa0>; + interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&edma 34 0>, + <&edma 33 0>; + dma-names = "tx", "rx"; + }; }; gpmc: gpmc@50000000 { @@ -286,17 +364,34 @@ status = "disabled"; }; - qspi: spi@47900000 { - compatible = "ti,am4372-qspi"; - reg = <0x47900000 0x100>, - <0x30000000 0x4000000>; - reg-names = "qspi_base", "qspi_mmap"; + target-module@47900000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x47900000 0x4>, + <0x47900010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + clocks = <&l3s_clkctrl AM4_L3S_QSPI_CLKCTRL 0>; + clock-names = "fck"; #address-cells = <1>; - #size-cells = <0>; - ti,hwmods = "qspi"; - interrupts = <0 138 0x4>; - num-cs = <4>; - status = "disabled"; + #size-cells = <1>; + ranges = <0x0 0x47900000 0x1000>, + <0x30000000 0x30000000 0x4000000>; + + qspi: spi@0 { + compatible = "ti,am4372-qspi"; + reg = <0 0x100>, + <0x30000000 0x4000000>; + reg-names = "qspi_base", "qspi_mmap"; + clocks = <&dpll_per_m2_div4_ck>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 138 0x4>; + num-cs = <4>; + }; }; dss: dss@4832a000 { @@ -317,6 +412,8 @@ ti,hwmods = "dss_dispc"; clocks = <&disp_clk>; clock-names = "fck"; + + max-memory-bandwidth = <230000000>; }; rfbi: rfbi@4832a800 { @@ -329,27 +426,73 @@ }; }; - ocmcram: ocmcram@40300000 { + ocmcram: sram@40300000 { compatible = "mmio-sram"; reg = <0x40300000 0x40000>; /* 256k */ ranges = <0x0 0x40300000 0x40000>; #address-cells = <1>; #size-cells = <1>; - pm_sram_code: pm-sram-code@0 { + pm_sram_code: pm-code-sram@0 { compatible = "ti,sram"; reg = <0x0 0x1000>; protect-exec; }; - pm_sram_data: pm-sram-data@1000 { + pm_sram_data: pm-data-sram@1000 { compatible = "ti,sram"; reg = <0x1000 0x1000>; pool; }; }; + + target-module@56000000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x5600fe00 0x4>, + <0x5600fe10 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + clocks = <&gfx_l3_clkctrl AM4_GFX_L3_GFX_CLKCTRL 0>; + clock-names = "fck"; + resets = <&prm_gfx 0>; + reset-names = "rstctrl"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x56000000 0x1000000>; + }; }; }; #include "am437x-l4.dtsi" #include "am43xx-clocks.dtsi" + +&prcm { + prm_gfx: prm@400 { + compatible = "ti,am4-prm-inst", "ti,omap-prm-inst"; + reg = <0x400 0x100>; + #reset-cells = <1>; + }; + + prm_per: prm@800 { + compatible = "ti,am4-prm-inst", "ti,omap-prm-inst"; + reg = <0x800 0x100>; + #reset-cells = <1>; + }; + + prm_wkup: prm@2000 { + compatible = "ti,am4-prm-inst", "ti,omap-prm-inst"; + reg = <0x2000 0x100>; + #reset-cells = <1>; + }; + + prm_device: prm@4000 { + compatible = "ti,am4-prm-inst", "ti,omap-prm-inst"; + reg = <0x4000 0x100>; + #reset-cells = <1>; + }; +}; diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts index cae4500194fe..811c8cae315b 100644 --- a/arch/arm/boot/dts/am437x-gp-evm.dts +++ b/arch/arm/boot/dts/am437x-gp-evm.dts @@ -86,7 +86,7 @@ }; lcd0: display { - compatible = "osddisplays,osd057T0559-34ts", "panel-dpi"; + compatible = "osddisplays,osd070t1718-19ts", "panel-dpi"; label = "lcd"; backlight = <&lcd_bl>; diff --git a/arch/arm/boot/dts/am437x-l4.dtsi b/arch/arm/boot/dts/am437x-l4.dtsi index 989cb60b9029..e18e17d31272 100644 --- a/arch/arm/boot/dts/am437x-l4.dtsi +++ b/arch/arm/boot/dts/am437x-l4.dtsi @@ -132,7 +132,6 @@ target-module@7000 { /* 0x44e07000, ap 14 20.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "gpio1"; reg = <0x7000 0x4>, <0x7010 0x4>, <0x7114 0x4>; @@ -167,7 +166,6 @@ target-module@9000 { /* 0x44e09000, ap 16 04.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "uart1"; reg = <0x9050 0x4>, <0x9054 0x4>, <0x9058 0x4>; @@ -195,7 +193,6 @@ target-module@b000 { /* 0x44e0b000, ap 18 48.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "i2c1"; reg = <0xb000 0x8>, <0xb010 0x8>, <0xb090 0x8>; @@ -228,7 +225,6 @@ target-module@d000 { /* 0x44e0d000, ap 20 38.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "adc_tsc"; reg = <0xd000 0x4>, <0xd010 0x4>; reg-names = "rev", "sysc"; @@ -373,7 +369,6 @@ target-module@35000 { /* 0x44e35000, ap 28 50.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "wd_timer2"; reg = <0x35000 0x4>, <0x35010 0x4>, <0x35014 0x4>; @@ -512,7 +507,6 @@ target-module@100000 { /* 0x4a100000, ap 3 04.0 */ compatible = "ti,sysc-omap4-simple", "ti,sysc"; - ti,hwmods = "cpgmac0"; reg = <0x101200 0x4>, <0x101208 0x4>, <0x101204 0x4>; @@ -559,11 +553,10 @@ davinci_mdio: mdio@1000 { compatible = "ti,am4372-mdio","ti,cpsw-mdio","ti,davinci_mdio"; reg = <0x1000 0x100>; + clocks = <&cpsw_125mhz_clkctrl AM4_CPSW_125MHZ_CPGMAC0_CLKCTRL 0>; + clock-names = "fck"; #address-cells = <1>; #size-cells = <0>; - clocks = <&cpsw_125mhz_gclk>; - clock-names = "fck"; - ti,hwmods = "davinci_mdio"; bus_freq = <1000000>; status = "disabled"; }; @@ -681,7 +674,6 @@ target-module@22000 { /* 0x48022000, ap 8 0a.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "uart2"; reg = <0x22050 0x4>, <0x22054 0x4>, <0x22058 0x4>; @@ -710,7 +702,6 @@ target-module@24000 { /* 0x48024000, ap 10 1c.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "uart3"; reg = <0x24050 0x4>, <0x24054 0x4>, <0x24058 0x4>; @@ -739,7 +730,6 @@ target-module@2a000 { /* 0x4802a000, ap 12 22.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "i2c2"; reg = <0x2a000 0x8>, <0x2a010 0x8>, <0x2a090 0x8>; @@ -772,7 +762,6 @@ target-module@30000 { /* 0x48030000, ap 65 08.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "spi0"; reg = <0x30000 0x4>, <0x30110 0x4>, <0x30114 0x4>; @@ -819,7 +808,6 @@ target-module@38000 { /* 0x48038000, ap 14 04.0 */ compatible = "ti,sysc-omap4-simple", "ti,sysc"; - ti,hwmods = "mcasp0"; reg = <0x38000 0x4>, <0x38004 0x4>; reg-names = "rev", "sysc"; @@ -851,7 +839,6 @@ target-module@3c000 { /* 0x4803c000, ap 16 2a.0 */ compatible = "ti,sysc-omap4-simple", "ti,sysc"; - ti,hwmods = "mcasp1"; reg = <0x3c000 0x4>, <0x3c004 0x4>; reg-names = "rev", "sysc"; @@ -911,7 +898,6 @@ target-module@42000 { /* 0x48042000, ap 20 24.0 */ compatible = "ti,sysc-omap4-timer", "ti,sysc"; - ti,hwmods = "timer3"; reg = <0x42000 0x4>, <0x42010 0x4>, <0x42014 0x4>; @@ -938,7 +924,6 @@ target-module@44000 { /* 0x48044000, ap 22 26.0 */ compatible = "ti,sysc-omap4-timer", "ti,sysc"; - ti,hwmods = "timer4"; reg = <0x44000 0x4>, <0x44010 0x4>, <0x44014 0x4>; @@ -966,7 +951,6 @@ target-module@46000 { /* 0x48046000, ap 24 28.0 */ compatible = "ti,sysc-omap4-timer", "ti,sysc"; - ti,hwmods = "timer5"; reg = <0x46000 0x4>, <0x46010 0x4>, <0x46014 0x4>; @@ -994,7 +978,6 @@ target-module@48000 { /* 0x48048000, ap 26 1a.0 */ compatible = "ti,sysc-omap4-timer", "ti,sysc"; - ti,hwmods = "timer6"; reg = <0x48000 0x4>, <0x48010 0x4>, <0x48014 0x4>; @@ -1022,7 +1005,6 @@ target-module@4a000 { /* 0x4804a000, ap 71 48.0 */ compatible = "ti,sysc-omap4-timer", "ti,sysc"; - ti,hwmods = "timer7"; reg = <0x4a000 0x4>, <0x4a010 0x4>, <0x4a014 0x4>; @@ -1050,7 +1032,6 @@ target-module@4c000 { /* 0x4804c000, ap 28 36.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "gpio2"; reg = <0x4c000 0x4>, <0x4c010 0x4>, <0x4c114 0x4>; @@ -1085,7 +1066,6 @@ target-module@60000 { /* 0x48060000, ap 30 14.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "mmc1"; reg = <0x602fc 0x4>, <0x60110 0x4>, <0x60114 0x4>; @@ -1120,7 +1100,6 @@ target-module@80000 { /* 0x48080000, ap 32 18.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "elm"; reg = <0x80000 0x4>, <0x80010 0x4>, <0x80014 0x4>; @@ -1151,7 +1130,6 @@ target-module@c8000 { /* 0x480c8000, ap 73 06.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mailbox"; reg = <0xc8000 0x4>, <0xc8010 0x4>; reg-names = "rev", "sysc"; @@ -1183,7 +1161,6 @@ target-module@ca000 { /* 0x480ca000, ap 77 38.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "spinlock"; reg = <0xca000 0x4>, <0xca010 0x4>, <0xca014 0x4>; @@ -1264,7 +1241,6 @@ target-module@9c000 { /* 0x4819c000, ap 38 52.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "i2c3"; reg = <0x9c000 0x8>, <0x9c010 0x8>, <0x9c090 0x8>; @@ -1297,7 +1273,6 @@ target-module@a0000 { /* 0x481a0000, ap 67 2c.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "spi1"; reg = <0xa0000 0x4>, <0xa0110 0x4>, <0xa0114 0x4>; @@ -1328,7 +1303,6 @@ target-module@a2000 { /* 0x481a2000, ap 69 2e.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "spi2"; reg = <0xa2000 0x4>, <0xa2110 0x4>, <0xa2114 0x4>; @@ -1359,7 +1333,6 @@ target-module@a4000 { /* 0x481a4000, ap 92 62.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "spi3"; reg = <0xa4000 0x4>, <0xa4110 0x4>, <0xa4114 0x4>; @@ -1390,7 +1363,6 @@ target-module@a6000 { /* 0x481a6000, ap 40 16.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "uart4"; reg = <0xa6050 0x4>, <0xa6054 0x4>, <0xa6058 0x4>; @@ -1419,7 +1391,6 @@ target-module@a8000 { /* 0x481a8000, ap 42 20.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "uart5"; reg = <0xa8050 0x4>, <0xa8054 0x4>, <0xa8058 0x4>; @@ -1448,7 +1419,6 @@ target-module@aa000 { /* 0x481aa000, ap 44 12.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "uart6"; reg = <0xaa050 0x4>, <0xaa054 0x4>, <0xaa058 0x4>; @@ -1477,7 +1447,6 @@ target-module@ac000 { /* 0x481ac000, ap 46 30.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "gpio3"; reg = <0xac000 0x4>, <0xac010 0x4>, <0xac114 0x4>; @@ -1512,7 +1481,6 @@ target-module@ae000 { /* 0x481ae000, ap 48 32.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "gpio4"; reg = <0xae000 0x4>, <0xae010 0x4>, <0xae114 0x4>; @@ -1547,7 +1515,6 @@ target-module@c1000 { /* 0x481c1000, ap 94 68.0 */ compatible = "ti,sysc-omap4-timer", "ti,sysc"; - ti,hwmods = "timer8"; reg = <0xc1000 0x4>, <0xc1010 0x4>, <0xc1014 0x4>; @@ -1574,7 +1541,8 @@ target-module@cc000 { /* 0x481cc000, ap 50 46.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "d_can0"; + reg = <0xcc020 0x4>; + reg-names = "rev"; /* Domains (P, C): per_pwrdm, l4ls_clkdm */ clocks = <&l4ls_clkctrl AM4_L4LS_D_CAN0_CLKCTRL 0>; clock-names = "fck"; @@ -1593,7 +1561,8 @@ target-module@d0000 { /* 0x481d0000, ap 52 3a.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "d_can1"; + reg = <0xd0020 0x4>; + reg-names = "rev"; /* Domains (P, C): per_pwrdm, l4ls_clkdm */ clocks = <&l4ls_clkctrl AM4_L4LS_D_CAN1_CLKCTRL 0>; clock-names = "fck"; @@ -1612,7 +1581,6 @@ target-module@d8000 { /* 0x481d8000, ap 54 5e.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "mmc2"; reg = <0xd82fc 0x4>, <0xd8110 0x4>, <0xd8114 0x4>; @@ -1712,7 +1680,6 @@ target-module@0 { /* 0x48300000, ap 56 40.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "epwmss0"; reg = <0x0 0x4>, <0x4 0x4>; reg-names = "rev", "sysc"; @@ -1765,7 +1732,6 @@ target-module@2000 { /* 0x48302000, ap 58 4a.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "epwmss1"; reg = <0x2000 0x4>, <0x2004 0x4>; reg-names = "rev", "sysc"; @@ -1818,7 +1784,6 @@ target-module@4000 { /* 0x48304000, ap 60 44.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "epwmss2"; reg = <0x4000 0x4>, <0x4004 0x4>; reg-names = "rev", "sysc"; @@ -1871,7 +1836,6 @@ target-module@6000 { /* 0x48306000, ap 96 58.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "epwmss3"; reg = <0x6000 0x4>, <0x6004 0x4>; reg-names = "rev", "sysc"; @@ -1913,7 +1877,6 @@ target-module@8000 { /* 0x48308000, ap 98 54.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "epwmss4"; reg = <0x8000 0x4>, <0x8004 0x4>; reg-names = "rev", "sysc"; @@ -1955,7 +1918,6 @@ target-module@a000 { /* 0x4830a000, ap 100 60.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "epwmss5"; reg = <0xa000 0x4>, <0xa004 0x4>; reg-names = "rev", "sysc"; @@ -1997,7 +1959,6 @@ target-module@10000 { /* 0x48310000, ap 64 4e.1 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "rng"; reg = <0x11fe0 0x4>, <0x11fe4 0x4>; reg-names = "rev", "sysc"; @@ -2036,7 +1997,6 @@ target-module@20000 { /* 0x48320000, ap 82 34.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "gpio5"; reg = <0x20000 0x4>, <0x20010 0x4>, <0x20114 0x4>; @@ -2071,7 +2031,6 @@ target-module@22000 { /* 0x48322000, ap 116 64.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "gpio6"; reg = <0x22000 0x4>, <0x22010 0x4>, <0x22114 0x4>; @@ -2106,7 +2065,6 @@ target-module@26000 { /* 0x48326000, ap 86 66.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "vpfe0"; reg = <0x26000 0x4>, <0x26104 0x4>; reg-names = "rev", "sysc"; @@ -2133,7 +2091,6 @@ target-module@28000 { /* 0x48328000, ap 75 0e.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "vpfe1"; reg = <0x28000 0x4>, <0x28104 0x4>; reg-names = "rev", "sysc"; @@ -2182,7 +2139,6 @@ target-module@3d000 { /* 0x4833d000, ap 102 6e.0 */ compatible = "ti,sysc-omap4-timer", "ti,sysc"; - ti,hwmods = "timer9"; reg = <0x3d000 0x4>, <0x3d010 0x4>, <0x3d014 0x4>; @@ -2209,7 +2165,6 @@ target-module@3f000 { /* 0x4833f000, ap 104 5c.0 */ compatible = "ti,sysc-omap4-timer", "ti,sysc"; - ti,hwmods = "timer10"; reg = <0x3f000 0x4>, <0x3f010 0x4>, <0x3f014 0x4>; @@ -2236,7 +2191,6 @@ target-module@41000 { /* 0x48341000, ap 106 76.0 */ compatible = "ti,sysc-omap4-timer", "ti,sysc"; - ti,hwmods = "timer11"; reg = <0x41000 0x4>, <0x41010 0x4>, <0x41014 0x4>; @@ -2263,7 +2217,6 @@ target-module@45000 { /* 0x48345000, ap 108 6a.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "spi4"; reg = <0x45000 0x4>, <0x45110 0x4>, <0x45114 0x4>; @@ -2294,7 +2247,6 @@ target-module@47000 { /* 0x48347000, ap 110 70.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "hdq1w"; reg = <0x47000 0x4>, <0x47014 0x4>, <0x47018 0x4>; @@ -2379,7 +2331,6 @@ target-module@a8000 { /* 0x483a8000, ap 125 6c.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "ocp2scp0"; reg = <0xa8000 0x4>; reg-names = "rev"; /* Domains (P, C): per_pwrdm, l4ls_clkdm */ @@ -2461,7 +2412,6 @@ target-module@e8000 { /* 0x483e8000, ap 129 78.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "ocp2scp1"; reg = <0xe8000 0x4>; reg-names = "rev"; /* Domains (P, C): per_pwrdm, l4ls_clkdm */ diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts index 74eaa6a3b258..25222497f828 100644 --- a/arch/arm/boot/dts/am437x-sk-evm.dts +++ b/arch/arm/boot/dts/am437x-sk-evm.dts @@ -272,6 +272,12 @@ >; }; + clkout1_pin: pinmux_clkout1_pin { + pinctrl-single,pins = < + 0x270 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* XDMA_EVENT_INTR0/CLKOUT1 */ + >; + }; + cpsw_default: cpsw_default { pinctrl-single,pins = < /* Slave 1 */ @@ -593,6 +599,25 @@ pinctrl-0 = <&i2c1_pins>; clock-frequency = <400000>; + ov2659@30 { + compatible = "ovti,ov2659"; + reg = <0x30>; + pinctrl-names = "default"; + pinctrl-0 = <&clkout1_pin>; + + clocks = <&clkout1_mux_ck>; + clock-names = "xvclk"; + assigned-clocks = <&clkout1_mux_ck>; + assigned-clock-parents = <&clkout1_osc_div_ck>; + + port { + ov2659_1: endpoint { + remote-endpoint = <&vpfe0_ep>; + link-frequencies = /bits/ 64 <70000000>; + }; + }; + }; + edt-ft5306@38 { status = "okay"; compatible = "edt,edt-ft5306", "edt,edt-ft5x06"; @@ -877,7 +902,7 @@ /* Camera port */ port { vpfe0_ep: endpoint { - /* remote-endpoint = <&sensor>; add once we have it */ + remote-endpoint = <&ov2659_1>; ti,am437x-vpfe-interface = <0>; bus-width = <8>; hsync-active = <0>; diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts index 95314121d111..27259fd6f741 100644 --- a/arch/arm/boot/dts/am43x-epos-evm.dts +++ b/arch/arm/boot/dts/am43x-epos-evm.dts @@ -42,7 +42,7 @@ }; lcd0: display { - compatible = "osddisplays,osd057T0559-34ts", "panel-dpi"; + compatible = "osddisplays,osd070t1718-19ts", "panel-dpi"; label = "lcd"; backlight = <&lcd_bl>; @@ -145,6 +145,12 @@ system-clock-frequency = <12000000>; }; }; + + audio_mstrclk: clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <12000000>; + }; }; &am43xx_pinmux { @@ -696,6 +702,21 @@ IOVDD-supply = <&dcdc4>; /* V3_3D -> DCDC4 */ DVDD-supply = <&ldo1>; /* V1_8AUD -> V1_8D -> LDO1 */ }; + + ov2659@30 { + compatible = "ovti,ov2659"; + reg = <0x30>; + + clocks = <&audio_mstrclk>; + clock-names = "xvclk"; + + port { + ov2659_1: endpoint { + remote-endpoint = <&vpfe1_ep>; + link-frequencies = /bits/ 64 <70000000>; + }; + }; + }; }; &i2c2 { @@ -848,6 +869,7 @@ pinctrl-names = "default", "sleep"; pinctrl-0 = <&spi0_pins_default>; pinctrl-1 = <&spi0_pins_sleep>; + ti,pindir-d0-out-d1-in = <1>; }; &spi1 { @@ -855,6 +877,7 @@ pinctrl-names = "default", "sleep"; pinctrl-0 = <&spi1_pins_default>; pinctrl-1 = <&spi1_pins_sleep>; + ti,pindir-d0-out-d1-in = <1>; }; &usb2_phy1 { @@ -962,7 +985,7 @@ port { vpfe1_ep: endpoint { - /* remote-endpoint = <&sensor>; add once we have it */ + remote-endpoint = <&ov2659_1>; ti,am437x-vpfe-interface = <0>; bus-width = <8>; hsync-active = <0>; diff --git a/arch/arm/boot/dts/am43xx-clocks.dtsi b/arch/arm/boot/dts/am43xx-clocks.dtsi index 091356f2a8c1..c726cd8dbdf1 100644 --- a/arch/arm/boot/dts/am43xx-clocks.dtsi +++ b/arch/arm/boot/dts/am43xx-clocks.dtsi @@ -704,6 +704,60 @@ ti,bit-shift = <8>; reg = <0x2a48>; }; + + clkout1_osc_div_ck: clkout1-osc-div-ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&sys_clkin_ck>; + ti,bit-shift = <20>; + ti,max-div = <4>; + reg = <0x4100>; + }; + + clkout1_src2_mux_ck: clkout1-src2-mux-ck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&clk_rc32k_ck>, <&sysclk_div>, <&dpll_ddr_m2_ck>, + <&dpll_per_m2_ck>, <&dpll_disp_m2_ck>, + <&dpll_mpu_m2_ck>; + reg = <0x4100>; + }; + + clkout1_src2_pre_div_ck: clkout1-src2-pre-div-ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&clkout1_src2_mux_ck>; + ti,bit-shift = <4>; + ti,max-div = <8>; + reg = <0x4100>; + }; + + clkout1_src2_post_div_ck: clkout1-src2-post-div-ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&clkout1_src2_pre_div_ck>; + ti,bit-shift = <8>; + ti,max-div = <32>; + ti,index-power-of-two; + reg = <0x4100>; + }; + + clkout1_mux_ck: clkout1-mux-ck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&clkout1_osc_div_ck>, <&clk_rc32k_ck>, + <&clkout1_src2_post_div_ck>, <&dpll_extdev_m2_ck>; + ti,bit-shift = <16>; + reg = <0x4100>; + }; + + clkout1_ck: clkout1-ck { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&clkout1_mux_ck>; + ti,bit-shift = <23>; + reg = <0x4100>; + }; }; &prcm { diff --git a/arch/arm/boot/dts/am571x-idk.dts b/arch/arm/boot/dts/am571x-idk.dts index 1d5e99964bbf..669559c9c95b 100644 --- a/arch/arm/boot/dts/am571x-idk.dts +++ b/arch/arm/boot/dts/am571x-idk.dts @@ -167,22 +167,13 @@ &pcie1_rc { status = "okay"; - gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; -}; - -&pcie1_ep { - gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; + gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>; }; &mmc1 { - pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104"; + pinctrl-names = "default", "hs"; pinctrl-0 = <&mmc1_pins_default_no_clk_pu>; pinctrl-1 = <&mmc1_pins_hs>; - pinctrl-2 = <&mmc1_pins_sdr12>; - pinctrl-3 = <&mmc1_pins_sdr25>; - pinctrl-4 = <&mmc1_pins_sdr50>; - pinctrl-5 = <&mmc1_pins_ddr50_rev20 &mmc1_iodelay_ddr50_conf>; - pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>; }; &mmc2 { @@ -191,3 +182,30 @@ pinctrl-1 = <&mmc2_pins_hs>; pinctrl-2 = <&mmc2_pins_ddr_rev20 &mmc2_iodelay_ddr_conf>; }; + +&mac_sw { + pinctrl-names = "default", "sleep"; + status = "okay"; +}; + +&cpsw_port1 { + phy-handle = <ðphy0_sw>; + phy-mode = "rgmii"; + ti,dual-emac-pvid = <1>; +}; + +&cpsw_port2 { + phy-handle = <ðphy1_sw>; + phy-mode = "rgmii"; + ti,dual-emac-pvid = <2>; +}; + +&davinci_mdio_sw { + ethphy0_sw: ethernet-phy@0 { + reg = <0>; + }; + + ethphy1_sw: ethernet-phy@1 { + reg = <1>; + }; +}; diff --git a/arch/arm/boot/dts/am572x-idk-common.dtsi b/arch/arm/boot/dts/am572x-idk-common.dtsi index a064f13b3880..ddf123620e96 100644 --- a/arch/arm/boot/dts/am572x-idk-common.dtsi +++ b/arch/arm/boot/dts/am572x-idk-common.dtsi @@ -147,10 +147,6 @@ gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; }; -&pcie1_ep { - gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; -}; - &mailbox5 { status = "okay"; mbox_ipu1_ipc3x: mbox_ipu1_ipc3x { diff --git a/arch/arm/boot/dts/am572x-idk.dts b/arch/arm/boot/dts/am572x-idk.dts index c65d7f6d3b5a..c3d966904d64 100644 --- a/arch/arm/boot/dts/am572x-idk.dts +++ b/arch/arm/boot/dts/am572x-idk.dts @@ -16,14 +16,9 @@ }; &mmc1 { - pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104"; + pinctrl-names = "default", "hs"; pinctrl-0 = <&mmc1_pins_default_no_clk_pu>; pinctrl-1 = <&mmc1_pins_hs>; - pinctrl-2 = <&mmc1_pins_sdr12>; - pinctrl-3 = <&mmc1_pins_sdr25>; - pinctrl-4 = <&mmc1_pins_sdr50>; - pinctrl-5 = <&mmc1_pins_ddr50 &mmc1_iodelay_ddr_rev20_conf>; - pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>; }; &mmc2 { @@ -32,3 +27,8 @@ pinctrl-1 = <&mmc2_pins_hs>; pinctrl-2 = <&mmc2_pins_ddr_rev20>; }; + +&mac { + status = "okay"; + dual_emac; +}; diff --git a/arch/arm/boot/dts/am574x-idk.dts b/arch/arm/boot/dts/am574x-idk.dts index dc5141c35610..fa0088025b2c 100644 --- a/arch/arm/boot/dts/am574x-idk.dts +++ b/arch/arm/boot/dts/am574x-idk.dts @@ -24,14 +24,9 @@ }; &mmc1 { - pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104"; + pinctrl-names = "default", "hs"; pinctrl-0 = <&mmc1_pins_default_no_clk_pu>; pinctrl-1 = <&mmc1_pins_hs>; - pinctrl-2 = <&mmc1_pins_default>; - pinctrl-3 = <&mmc1_pins_hs>; - pinctrl-4 = <&mmc1_pins_sdr50>; - pinctrl-5 = <&mmc1_pins_ddr50 &mmc1_iodelay_ddr_conf>; - pinctrl-6 = <&mmc1_pins_ddr50 &mmc1_iodelay_sdr104_conf>; }; &mmc2 { @@ -40,3 +35,8 @@ pinctrl-1 = <&mmc2_pins_default>; pinctrl-2 = <&mmc2_pins_default>; }; + +&mac { + status = "okay"; + dual_emac; +}; diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi index d02f5fa61e5f..a813a0cf3ff3 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi +++ b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi @@ -29,6 +29,27 @@ reg = <0x0 0x80000000 0x0 0x80000000>; }; + main_12v0: fixedregulator-main_12v0 { + /* main supply */ + compatible = "regulator-fixed"; + regulator-name = "main_12v0"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + regulator-boot-on; + }; + + evm_5v0: fixedregulator-evm_5v0 { + /* Output of TPS54531D */ + compatible = "regulator-fixed"; + regulator-name = "evm_5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&main_12v0>; + regulator-always-on; + regulator-boot-on; + }; + vdd_3v3: fixedregulator-vdd_3v3 { compatible = "regulator-fixed"; regulator-name = "vdd_3v3"; @@ -379,7 +400,7 @@ }; }; -&gpio7 { +&gpio7_target { ti,no-reset-on-init; ti,no-idle-on-init; }; @@ -430,6 +451,7 @@ bus-width = <4>; cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */ + no-1-8-v; }; &mmc2 { @@ -546,10 +568,6 @@ gpios = <&gpio2 8 GPIO_ACTIVE_LOW>; }; -&pcie1_ep { - gpios = <&gpio2 8 GPIO_ACTIVE_LOW>; -}; - &mcasp3 { #sound-dai-cells = <0>; assigned-clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>; diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts b/arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts index a374b5cd6db0..39d1c4ff5749 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts +++ b/arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts @@ -16,20 +16,15 @@ }; &mmc1 { - pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104"; + pinctrl-names = "default", "hs"; pinctrl-0 = <&mmc1_pins_default>; pinctrl-1 = <&mmc1_pins_hs>; - pinctrl-2 = <&mmc1_pins_sdr12>; - pinctrl-3 = <&mmc1_pins_sdr25>; - pinctrl-4 = <&mmc1_pins_sdr50>; - pinctrl-5 = <&mmc1_pins_ddr50 &mmc1_iodelay_ddr_rev11_conf>; - pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev11_conf>; vmmc-supply = <&vdd_3v3>; vqmmc-supply = <&ldo1_reg>; }; &mmc2 { - pinctrl-names = "default", "hs", "ddr_1_8v"; + pinctrl-names = "default", "hs", "ddr_3_3v"; pinctrl-0 = <&mmc2_pins_default>; pinctrl-1 = <&mmc2_pins_hs>; pinctrl-2 = <&mmc2_pins_ddr_3_3v_rev11 &mmc2_iodelay_ddr_3_3v_rev11_conf>; diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-revc.dts b/arch/arm/boot/dts/am57xx-beagle-x15-revc.dts index 4badd2144db9..4187a9729f96 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15-revc.dts +++ b/arch/arm/boot/dts/am57xx-beagle-x15-revc.dts @@ -16,20 +16,15 @@ }; &mmc1 { - pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104"; + pinctrl-names = "default", "hs"; pinctrl-0 = <&mmc1_pins_default>; pinctrl-1 = <&mmc1_pins_hs>; - pinctrl-2 = <&mmc1_pins_sdr12>; - pinctrl-3 = <&mmc1_pins_sdr25>; - pinctrl-4 = <&mmc1_pins_sdr50>; - pinctrl-5 = <&mmc1_pins_ddr50 &mmc1_iodelay_ddr_rev20_conf>; - pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>; vmmc-supply = <&vdd_3v3>; vqmmc-supply = <&ldo1_reg>; }; &mmc2 { - pinctrl-names = "default", "hs", "ddr_1_8v"; + pinctrl-names = "default", "hs", "ddr_3_3v"; pinctrl-0 = <&mmc2_pins_default>; pinctrl-1 = <&mmc2_pins_hs>; pinctrl-2 = <&mmc2_pins_ddr_rev20>; diff --git a/arch/arm/boot/dts/am57xx-idk-common.dtsi b/arch/arm/boot/dts/am57xx-idk-common.dtsi index 423855a2a2d6..aa5e55f98179 100644 --- a/arch/arm/boot/dts/am57xx-idk-common.dtsi +++ b/arch/arm/boot/dts/am57xx-idk-common.dtsi @@ -9,6 +9,7 @@ aliases { rtc0 = &tps659038_rtc; rtc1 = &rtc; + display0 = &hdmi0; }; chosen { @@ -96,6 +97,48 @@ default-state = "off"; }; }; + + hdmi0: connector@0 { + compatible = "hdmi-connector"; + label = "hdmi"; + + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&tpd12s015_out>; + }; + }; + }; + + tpd12s015: encoder@0 { + compatible = "ti,tpd12s016", "ti,tpd12s015"; + + gpios = <0>, /* optional CT_CP_HPD */ + <0>, /* optional LS_OE */ + <&gpio7 12 GPIO_ACTIVE_HIGH>; /* HPD */ + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + tpd12s015_in: endpoint@0 { + remote-endpoint = <&hdmi_out>; + }; + }; + + port@1 { + reg = <1>; + + tpd12s015_out: endpoint@0 { + remote-endpoint = <&hdmi_connector_in>; + }; + }; + }; + }; }; &dra7_pmx_core { @@ -363,11 +406,6 @@ ext-clk-src; }; -&mac { - status = "okay"; - dual_emac; -}; - &cpsw_emac0 { phy-handle = <ðphy0>; phy-mode = "rgmii"; @@ -490,3 +528,19 @@ &cpu0 { vdd-supply = <&smps12_reg>; }; + +&hdmi { + status = "okay"; + + vdda-supply = <&ldo4_reg>; + + port { + hdmi_out: endpoint { + remote-endpoint = <&tpd12s015_in>; + }; + }; +}; + +&dss { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/armada-385-clearfog-gtr-l8.dts b/arch/arm/boot/dts/armada-385-clearfog-gtr-l8.dts new file mode 100644 index 000000000000..c9ac630e5874 --- /dev/null +++ b/arch/arm/boot/dts/armada-385-clearfog-gtr-l8.dts @@ -0,0 +1,115 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) + +#include "armada-385-clearfog-gtr.dtsi" + +/ { + model = "SolidRun Clearfog GTR L8"; +}; + +&mdio { + switch0: switch0@4 { + compatible = "marvell,mv88e6190"; + reg = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&cf_gtr_switch_reset_pins>; + reset-gpios = <&gpio0 18 GPIO_ACTIVE_LOW>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + label = "lan8"; + phy-handle = <&switch0phy0>; + }; + + port@2 { + reg = <2>; + label = "lan7"; + phy-handle = <&switch0phy1>; + }; + + port@3 { + reg = <3>; + label = "lan6"; + phy-handle = <&switch0phy2>; + }; + + port@4 { + reg = <4>; + label = "lan5"; + phy-handle = <&switch0phy3>; + }; + + port@5 { + reg = <5>; + label = "lan4"; + phy-handle = <&switch0phy4>; + }; + + port@6 { + reg = <6>; + label = "lan3"; + phy-handle = <&switch0phy5>; + }; + + port@7 { + reg = <7>; + label = "lan2"; + phy-handle = <&switch0phy6>; + }; + + port@8 { + reg = <8>; + label = "lan1"; + phy-handle = <&switch0phy7>; + }; + + port@10 { + reg = <10>; + label = "cpu"; + ethernet = <ð1>; + }; + + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch0phy0: switch0phy0@1 { + reg = <0x1>; + }; + + switch0phy1: switch0phy1@2 { + reg = <0x2>; + }; + + switch0phy2: switch0phy2@3 { + reg = <0x3>; + }; + + switch0phy3: switch0phy3@4 { + reg = <0x4>; + }; + + switch0phy4: switch0phy4@5 { + reg = <0x5>; + }; + + switch0phy5: switch0phy5@6 { + reg = <0x6>; + }; + + switch0phy6: switch0phy6@7 { + reg = <0x7>; + }; + + switch0phy7: switch0phy7@8 { + reg = <0x8>; + }; + }; + + }; +}; diff --git a/arch/arm/boot/dts/armada-385-clearfog-gtr-s4.dts b/arch/arm/boot/dts/armada-385-clearfog-gtr-s4.dts new file mode 100644 index 000000000000..fa653b379490 --- /dev/null +++ b/arch/arm/boot/dts/armada-385-clearfog-gtr-s4.dts @@ -0,0 +1,79 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) + +#include "armada-385-clearfog-gtr.dtsi" + +/ { + model = "SolidRun Clearfog GTR S4"; +}; + +&sfp0 { + tx-fault-gpio = <&gpio0 24 GPIO_ACTIVE_HIGH>; +}; + +&mdio { + switch0: switch0@4 { + compatible = "marvell,mv88e6085"; + reg = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&cf_gtr_switch_reset_pins>; + reset-gpios = <&gpio0 18 GPIO_ACTIVE_LOW>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + label = "lan2"; + phy-handle = <&switch0phy0>; + }; + + port@2 { + reg = <2>; + label = "lan1"; + phy-handle = <&switch0phy1>; + }; + + port@3 { + reg = <3>; + label = "lan4"; + phy-handle = <&switch0phy2>; + }; + + port@4 { + reg = <4>; + label = "lan3"; + phy-handle = <&switch0phy3>; + }; + + port@5 { + reg = <5>; + label = "cpu"; + ethernet = <ð1>; + }; + + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch0phy0: switch0phy0@11 { + reg = <0x11>; + }; + + switch0phy1: switch0phy1@12 { + reg = <0x12>; + }; + + switch0phy2: switch0phy2@13 { + reg = <0x13>; + }; + + switch0phy3: switch0phy3@14 { + reg = <0x14>; + }; + }; + + }; +}; diff --git a/arch/arm/boot/dts/armada-385-clearfog-gtr.dtsi b/arch/arm/boot/dts/armada-385-clearfog-gtr.dtsi new file mode 100644 index 000000000000..624bbcae68c0 --- /dev/null +++ b/arch/arm/boot/dts/armada-385-clearfog-gtr.dtsi @@ -0,0 +1,450 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Device Tree file for Clearfog GTR machines rev 1.0 (88F6825) + * + * Rabeeh Khoury <rabeeh@solid-run.com>, based on Russell King clearfog work + */ + +/* + SERDES mapping - + 0. SATA1 on CON18, or optionally mini PCIe CON3 - PCIe0 + 1. 6141 switch (2.5Gbps capable) + 2. SATA0 on CON17, or optionally mini PCIe CON4 - PCIe1 + 3. USB 3.0 Host + 4. mini PCIe CON2 - PCIe2 + 5. SFP connector, or optionally SGMII Ethernet 1512 PHY + + USB 2.0 mapping - + 0. USB 2.0 - 0 USB pins header CON12 + 1. USB 2.0 - 1 mini PCIe CON2 + 2. USB 2.0 - 2 to USB 3.0 connector (used with SERDES #3) + + Pin mapping - + 0,1 - console UART + 2,3 - I2C0 - connected to I2C EEPROM, two temperature sensors, + front panel and PSE controller + 4,5 - MDC/MDIO + 6..17 - RGMII + 18 - Topaz switch reset (active low) + 19 - 1512 phy reset + 20 - 1512 phy reset (eth2, optional) + 21,28,37,38,39,40 - SD0 + 22 - USB 3.0 current limiter enable (active high) + 24 - SFP TX fault (input active high) + 25 - SFP present (input active low) + 26,27 - I2C1 - connected to SFP + 29 - Fan PWM + 30 - CON4 mini PCIe wifi disable + 31 - CON3 mini PCIe wifi disable + 32 - Fuse programming power toggle (1.8v) + 33 - CON4 mini PCIe reset + 34 - CON2 mini PCIe wifi disable + 35 - CON3 mini PCIe reset + 36 - Rear button (GPIO active low) + 41 - CON1 front panel connector + 42 - Front LED1, or front panel CON1 + 43 - Micron L-PBGA 24 ball SPI (1Gb) CS, or TPM SPI CS + 44 - CON2 mini PCIe reset + 45 - TPM PIRQ signal, or front panel CON1 + 46 - SFP TX disable + 47 - Control isolation of boot sensitive SAR signals + 48 - PSE reset + 49 - PSE OSS signal + 50 - PSE interrupt + 52 - Front LED2, or front panel + 53 - Front button + 54 - SFP LOS (input active high) + 55 - Fan sense + 56(mosi),57(clk),58(miso) - SPI interface - 32Mb SPI, 1Gb SPI and TPM + 59 - SPI 32Mb W25Q32BVZPIG CS0 chip select (bootable) +*/ + +/dts-v1/; +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> +#include "armada-385.dtsi" + +/ { + compatible = "marvell,armada385", "marvell,armada380"; + + aliases { + /* So that mvebu u-boot can update the MAC addresses */ + ethernet1 = ð0; + ethernet2 = ð1; + ethernet3 = ð2; + i2c0 = &i2c0; + i2c1 = &i2c1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; /* 256 MB */ + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_5p0v: regulator-5p0v { + compatible = "regulator-fixed"; + regulator-name = "5P0V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + v_usb3_con: regulator-v-usb3-con { + compatible = "regulator-fixed"; + gpio = <&gpio0 22 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&cf_gtr_usb3_con_vbus>; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + regulator-name = "v_usb3_con"; + vin-supply = <®_5p0v>; + regulator-boot-on; + regulator-always-on; + }; + + soc { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 + MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000 + MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000 + MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000 + MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>; + + internal-regs { + + rtc@a3800 { + status = "okay"; + }; + + i2c@11000 { /* ROM, temp sensor and front panel */ + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; + status = "okay"; + }; + + i2c@11100 { /* SFP (CON5/CON6) */ + pinctrl-0 = <&cf_gtr_i2c1_pins>; + pinctrl-names = "default"; + status = "okay"; + }; + + pinctrl@18000 { + cf_gtr_switch_reset_pins: cf-gtr-switch-reset-pins { + marvell,pins = "mpp18"; + marvell,function = "gpio"; + }; + + cf_gtr_usb3_con_vbus: cf-gtr-usb3-con-vbus { + marvell,pins = "mpp22"; + marvell,function = "gpio"; + }; + + cf_gtr_fan_pwm: cf-gtr-fan-pwm { + marvell,pins = "mpp23"; + marvell,function = "gpio"; + }; + + cf_gtr_i2c1_pins: i2c1-pins { + /* SFP */ + marvell,pins = "mpp26", "mpp27"; + marvell,function = "i2c1"; + }; + + cf_gtr_sdhci_pins: cf-gtr-sdhci-pins { + marvell,pins = "mpp21", "mpp28", + "mpp37", "mpp38", + "mpp39", "mpp40"; + marvell,function = "sd0"; + }; + + cf_gtr_isolation_pins: cf-gtr-isolation-pins { + marvell,pins = "mpp47"; + marvell,function = "gpio"; + }; + + cf_gtr_poe_reset_pins: cf-gtr-poe-reset-pins { + marvell,pins = "mpp48"; + marvell,function = "gpio"; + }; + + cf_gtr_spi1_cs_pins: spi1-cs-pins { + marvell,pins = "mpp59"; + marvell,function = "spi1"; + }; + + cf_gtr_front_button_pins: cf-gtr-front-button-pins { + marvell,pins = "mpp53"; + marvell,function = "gpio"; + }; + + cf_gtr_rear_button_pins: cf-gtr-rear-button-pins { + marvell,pins = "mpp36"; + marvell,function = "gpio"; + }; + }; + + sdhci@d8000 { + bus-width = <4>; + no-1-8-v; + non-removable; + pinctrl-0 = <&cf_gtr_sdhci_pins>; + pinctrl-names = "default"; + status = "okay"; + vmmc = <®_3p3v>; + wp-inverted; + }; + + usb@58000 { + status = "okay"; + }; + + usb3@f0000 { + status = "okay"; + }; + + usb3@f8000 { + vbus-supply = <&v_usb3_con>; + status = "okay"; + }; + }; + + pcie { + status = "okay"; + /* + * The PCIe units are accessible through + * the mini-PCIe connectors on the board. + */ + pcie@1,0 { + reset-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; + status = "okay"; + }; + + pcie@2,0 { + reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; + status = "okay"; + }; + + pcie@3,0 { + reset-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; + status = "okay"; + }; + }; + }; + + sfp0: sfp { + compatible = "sff,sfp"; + i2c-bus = <&i2c1>; + los-gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&gpio0 25 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-0 = <&cf_gtr_rear_button_pins &cf_gtr_front_button_pins>; + pinctrl-names = "default"; + + button_0 { + label = "Rear Button"; + gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; + linux,can-disable; + linux,code = <BTN_0>; + }; + + button_1 { + label = "Front Button"; + gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; + linux,can-disable; + linux,code = <BTN_1>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + led1 { + function = LED_FUNCTION_CPU; + color = <LED_COLOR_ID_GREEN>; + gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; + }; + + led2 { + function = LED_FUNCTION_HEARTBEAT; + color = <LED_COLOR_ID_GREEN>; + gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&bm { + status = "okay"; +}; + +&bm_bppi { + status = "okay"; +}; + +ð0 { + /* ethernet@70000 */ + pinctrl-0 = <&ge0_rgmii_pins>; + pinctrl-names = "default"; + phy = <&phy_dedicated>; + phy-mode = "rgmii-id"; + buffer-manager = <&bm>; + bm,pool-long = <0>; + bm,pool-short = <1>; + status = "okay"; +}; + +ð1 { + /* ethernet@30000 */ + bm,pool-long = <2>; + bm,pool-short = <1>; + buffer-manager = <&bm>; + phys = <&comphy1 1>; + phy-mode = "2500base-x"; + status = "okay"; + + fixed-link { + speed = <2500>; + full-duplex; + }; +}; + +ð2 { + /* ethernet@34000 */ + bm,pool-long = <3>; + bm,pool-short = <1>; + buffer-manager = <&bm>; + managed = "in-band-status"; + phys = <&comphy5 1>; + phy-mode = "sgmii"; + sfp = <&sfp0>; + status = "okay"; +}; + +&mdio { + pinctrl-names = "default"; + pinctrl-0 = <&mdio_pins>; + status = "okay"; + + phy_dedicated: ethernet-phy@0 { + /* + * Annoyingly, the marvell phy driver configures the LED + * register, rather than preserving reset-loaded setting. + * We undo that rubbish here. + */ + marvell,reg-init = <3 16 0 0x1017>; + reg = <0>; + }; +}; + +&uart0 { + pinctrl-0 = <&uart0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&spi1 { + /* + * CS0: W25Q32 flash + */ + pinctrl-0 = <&spi1_pins &cf_gtr_spi1_cs_pins>; + pinctrl-names = "default"; + status = "okay"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "w25q32", "jedec,spi-nor"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <3000000>; + status = "okay"; + }; +}; + +&i2c0 { + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; + status = "okay"; + + /* U26 temperature sensor placed near SoC */ + temp1: nct75@4c { + compatible = "lm75"; + reg = <0x4c>; + }; + + /* U27 temperature sensor placed near RTC battery */ + temp2: nct75@4d { + compatible = "lm75"; + reg = <0x4d>; + }; + + /* 2Kb eeprom */ + eeprom@53 { + compatible = "atmel,24c02"; + reg = <0x53>; + }; +}; + +&ahci0 { + status = "okay"; +}; + +&ahci1 { + status = "okay"; +}; + +&gpio0 { + pinctrl-0 = <&cf_gtr_fan_pwm>; + pinctrl-names = "default"; + + wifi-disable { + gpio-hog; + gpios = <30 GPIO_ACTIVE_LOW>, <31 GPIO_ACTIVE_LOW>; + output-low; + line-name = "wifi-disable"; + }; +}; + +&gpio1 { + pinctrl-0 = <&cf_gtr_isolation_pins &cf_gtr_poe_reset_pins>; + pinctrl-names = "default"; + + lte-disable { + gpio-hog; + gpios = <2 GPIO_ACTIVE_LOW>; + output-low; + line-name = "lte-disable"; + }; + + /* + * This signal, when asserted, isolates Armada 38x sample at reset pins + * from control of external devices. Should be de-asserted after reset. + */ + sar-isolation { + gpio-hog; + gpios = <15 GPIO_ACTIVE_LOW>; + output-low; + line-name = "sar-isolation"; + }; + + poe-reset { + gpio-hog; + gpios = <16 GPIO_ACTIVE_LOW>; + output-low; + line-name = "poe-reset"; + }; +}; diff --git a/arch/arm/boot/dts/armada-388-clearfog.dtsi b/arch/arm/boot/dts/armada-388-clearfog.dtsi index 0d81600ca247..a0aa1d188f0c 100644 --- a/arch/arm/boot/dts/armada-388-clearfog.dtsi +++ b/arch/arm/boot/dts/armada-388-clearfog.dtsi @@ -111,11 +111,6 @@ }; &i2c0 { - clock-frequency = <400000>; - pinctrl-0 = <&i2c0_pins>; - pinctrl-names = "default"; - status = "okay"; - /* * PCA9655 GPIO expander, up to 1MHz clock. * 0-CON3 CLKREQ# @@ -183,6 +178,12 @@ compatible = "microchip,mcp3021"; reg = <0x4c>; }; + + eeprom@52 { + compatible = "atmel,24c02"; + reg = <0x52>; + pagesize = <16>; + }; }; &i2c1 { diff --git a/arch/arm/boot/dts/armada-388-helios4.dts b/arch/arm/boot/dts/armada-388-helios4.dts index 705adfa8c680..fb49df2a3bce 100644 --- a/arch/arm/boot/dts/armada-388-helios4.dts +++ b/arch/arm/boot/dts/armada-388-helios4.dts @@ -140,11 +140,6 @@ soc { internal-regs { i2c@11000 { - clock-frequency = <400000>; - pinctrl-0 = <&i2c0_pins>; - pinctrl-names = "default"; - status = "okay"; - /* * PCA9655 GPIO expander, up to 1MHz clock. * 0-Board Revision bit 0 # diff --git a/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi b/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi index 3a7f9c1ac346..363ac4238859 100644 --- a/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi +++ b/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi @@ -71,6 +71,19 @@ }; }; +&i2c0 { + clock-frequency = <400000>; + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; + status = "okay"; + + eeprom@53 { + compatible = "atmel,24c02"; + reg = <0x53>; + pagesize = <16>; + }; +}; + &pinctrl { microsom_phy_clk_pins: microsom-phy-clk-pins { marvell,pins = "mpp45"; diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi index 3f4bb44d85f0..e038abc0c6b4 100644 --- a/arch/arm/boot/dts/armada-38x.dtsi +++ b/arch/arm/boot/dts/armada-38x.dtsi @@ -103,6 +103,11 @@ #size-cells = <1>; ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>; + sdramc: sdramc@1400 { + compatible = "marvell,armada-xp-sdram-controller"; + reg = <0x1400 0x500>; + }; + L2: cache-controller@8000 { compatible = "arm,pl310-cache"; reg = <0x8000 0x1000>; diff --git a/arch/arm/boot/dts/armada-xp-98dx3236.dtsi b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi index 267d0c178e55..654648b05c7c 100644 --- a/arch/arm/boot/dts/armada-xp-98dx3236.dtsi +++ b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi @@ -90,7 +90,7 @@ }; internal-regs { - sdramc@1400 { + sdramc: sdramc@1400 { compatible = "marvell,armada-xp-sdram-controller"; reg = <0x1400 0x500>; }; diff --git a/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts b/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts index df048050615f..4ec0ae01b61d 100644 --- a/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts +++ b/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts @@ -33,6 +33,11 @@ }; }; +&L2 { + arm,parity-enable; + marvell,ecc-enable; +}; + &devbus_bootcs { status = "okay"; diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi index ee15c77d3689..6c19984d668e 100644 --- a/arch/arm/boot/dts/armada-xp.dtsi +++ b/arch/arm/boot/dts/armada-xp.dtsi @@ -36,7 +36,7 @@ }; internal-regs { - sdramc@1400 { + sdramc: sdramc@1400 { compatible = "marvell,armada-xp-sdram-controller"; reg = <0x1400 0x500>; }; diff --git a/arch/arm/boot/dts/aspeed-ast2500-evb.dts b/arch/arm/boot/dts/aspeed-ast2500-evb.dts index 556ed469830c..8bec21ed0de5 100644 --- a/arch/arm/boot/dts/aspeed-ast2500-evb.dts +++ b/arch/arm/boot/dts/aspeed-ast2500-evb.dts @@ -40,6 +40,7 @@ status = "okay"; m25p,fast-read; label = "bmc"; + spi-max-frequency = <50000000>; #include "openbmc-flash-layout.dtsi" }; }; @@ -50,6 +51,7 @@ status = "okay"; m25p,fast-read; label = "pnor"; + spi-max-frequency = <100000000>; }; }; @@ -94,6 +96,17 @@ }; }; +&sdmmc { + status = "okay"; +}; + +&sdhci0 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sd1_default>; +}; + /* * Enable port A as device (via the virtual hub) and port B as * host by default on the eval board. This can be easily changed diff --git a/arch/arm/boot/dts/aspeed-ast2600-evb.dts b/arch/arm/boot/dts/aspeed-ast2600-evb.dts new file mode 100644 index 000000000000..4afa8662c4e8 --- /dev/null +++ b/arch/arm/boot/dts/aspeed-ast2600-evb.dts @@ -0,0 +1,215 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +// Copyright 2019 IBM Corp. + +/dts-v1/; + +#include "aspeed-g6.dtsi" + +/ { + model = "AST2600 EVB"; + compatible = "aspeed,ast2600"; + + aliases { + serial4 = &uart5; + }; + + chosen { + bootargs = "console=ttyS4,115200n8"; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x80000000>; + }; +}; + +&mdio1 { + status = "okay"; + + ethphy1: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; +}; + +&mdio2 { + status = "okay"; + + ethphy2: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; +}; + +&mdio3 { + status = "okay"; + + ethphy3: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; +}; + +&mac1 { + status = "okay"; + + phy-mode = "rgmii"; + phy-handle = <ðphy1>; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii2_default>; +}; + +&mac2 { + status = "okay"; + + phy-mode = "rgmii"; + phy-handle = <ðphy2>; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii3_default>; +}; + +&mac3 { + status = "okay"; + + phy-mode = "rgmii"; + phy-handle = <ðphy3>; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii4_default>; +}; + +&emmc_controller { + status = "okay"; +}; + +&emmc { + non-removable; + bus-width = <4>; + max-frequency = <52000000>; +}; + +&rtc { + status = "okay"; +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; + spi-max-frequency = <50000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + u-boot@0 { + reg = <0x0 0xe0000>; // 896KB + label = "u-boot"; + }; + + u-boot-env@e0000 { + reg = <0xe0000 0x20000>; // 128KB + label = "u-boot-env"; + }; + + kernel@100000 { + reg = <0x100000 0x900000>; // 9MB + label = "kernel"; + }; + + rofs@a00000 { + reg = <0xa00000 0x2000000>; // 32MB + label = "rofs"; + }; + + rwfs@6000000 { + reg = <0x2a00000 0x1600000>; // 22MB + label = "rwfs"; + }; + }; + }; +}; + +&spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; + + flash@0 { + status = "okay"; + m25p,fast-read; + label = "pnor"; + spi-max-frequency = <100000000>; + }; +}; + +&uart5 { + // Workaround for A0 + compatible = "snps,dw-apb-uart"; +}; + +&i2c0 { + status = "okay"; + + temp@2e { + compatible = "adi,adt7490"; + reg = <0x2e>; + }; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; +}; + +&i2c5 { + status = "okay"; +}; + +&i2c6 { + status = "okay"; +}; + +&i2c7 { + status = "okay"; +}; + +&i2c8 { + status = "okay"; +}; + +&i2c9 { + status = "okay"; +}; + +&i2c12 { + status = "okay"; +}; + +&i2c13 { + status = "okay"; +}; + +&i2c14 { + status = "okay"; +}; + +&i2c15 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-arm-stardragon4800-rep2.dts b/arch/arm/boot/dts/aspeed-bmc-arm-stardragon4800-rep2.dts index 521afbea2c5b..2c29ac037d32 100644 --- a/arch/arm/boot/dts/aspeed-bmc-arm-stardragon4800-rep2.dts +++ b/arch/arm/boot/dts/aspeed-bmc-arm-stardragon4800-rep2.dts @@ -92,6 +92,9 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rmii2_default>; + clocks = <&syscon ASPEED_CLK_GATE_MAC2CLK>, + <&syscon ASPEED_CLK_MAC2RCLK>; + clock-names = "MACCLK", "RCLK"; use-ncsi; }; diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts index d519d307aa2a..016bbcb99bb6 100644 --- a/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts @@ -2,7 +2,7 @@ // Copyright (c) 2018 Facebook Inc. /dts-v1/; -#include "aspeed-g5.dtsi" +#include "ast2500-facebook-netbmc-common.dtsi" / { model = "Facebook Backpack CMM BMC"; @@ -53,10 +53,6 @@ bootargs = "console=ttyS1,9600n8 root=/dev/ram rw earlyprintk"; }; - memory@80000000 { - reg = <0x80000000 0x20000000>; - }; - ast-adc-hwmon { compatible = "iio-hwmon"; io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, @@ -64,39 +60,7 @@ }; }; -&pinctrl { - aspeed,external-nodes = <&gfx &lhc>; -}; - -/* - * Update reset type to "system" (full chip) to fix warm reboot hang issue - * when reset type is set to default ("soc", gated by reset mask registers). - */ -&wdt1 { - status = "okay"; - aspeed,reset-type = "system"; -}; - -/* - * wdt2 is not used by Backpack CMM. - */ -&wdt2 { - status = "disabled"; -}; - -&fmc { - status = "okay"; - flash@0 { - status = "okay"; - m25p,fast-read; - label = "bmc"; -#include "facebook-bmc-flash-layout.dtsi" - }; -}; - &uart1 { - status = "okay"; - pinctrl-names = "default"; pinctrl-0 = <&pinctrl_txd1_default &pinctrl_rxd1_default &pinctrl_ncts1_default @@ -107,8 +71,6 @@ }; &uart3 { - status = "okay"; - pinctrl-names = "default"; pinctrl-0 = <&pinctrl_txd3_default &pinctrl_rxd3_default &pinctrl_ncts3_default @@ -123,17 +85,6 @@ &pinctrl_rxd4_default>; }; -&uart5 { - status = "okay"; -}; - -&mac1 { - status = "okay"; - no-hw-checksum; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>; -}; - /* * I2C bus reserved for communication with COM-E. */ @@ -380,3 +331,18 @@ &ehci1 { status = "okay"; }; + +&vhub { + status = "disabled"; +}; + +&sdhci0 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sd1_default>; +}; + +&sdhci1 { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-minipack.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-minipack.dts new file mode 100644 index 000000000000..88ce4ff9f47e --- /dev/null +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-minipack.dts @@ -0,0 +1,408 @@ +// SPDX-License-Identifier: GPL-2.0+ +// Copyright (c) 2018 Facebook Inc. +/dts-v1/; + +#include "ast2500-facebook-netbmc-common.dtsi" + +/ { + model = "Facebook Minipack 100 BMC"; + compatible = "facebook,minipack-bmc", "aspeed,ast2500"; + + aliases { + /* + * Override the default serial aliases to avoid breaking + * the legacy applications. + */ + serial0 = &uart5; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + serial4 = &uart4; + + /* + * i2c switch 2-0070, pca9548, 8 child channels assigned + * with bus number 16-23. + */ + i2c16 = &imux16; + i2c17 = &imux17; + i2c18 = &imux18; + i2c19 = &imux19; + i2c20 = &imux20; + i2c21 = &imux21; + i2c22 = &imux22; + i2c23 = &imux23; + + /* + * i2c switch 8-0070, pca9548, 8 child channels assigned + * with bus number 24-31. + */ + i2c24 = &imux24; + i2c25 = &imux25; + i2c26 = &imux26; + i2c27 = &imux27; + i2c28 = &imux28; + i2c29 = &imux29; + i2c30 = &imux30; + i2c31 = &imux31; + + /* + * i2c switch 9-0070, pca9548, 8 child channels assigned + * with bus number 32-39. + */ + i2c32 = &imux32; + i2c33 = &imux33; + i2c34 = &imux34; + i2c35 = &imux35; + i2c36 = &imux36; + i2c37 = &imux37; + i2c38 = &imux38; + i2c39 = &imux39; + + /* + * i2c switch 11-0070, pca9548, 8 child channels assigned + * with bus number 40-47. + */ + i2c40 = &imux40; + i2c41 = &imux41; + i2c42 = &imux42; + i2c43 = &imux43; + i2c44 = &imux44; + i2c45 = &imux45; + i2c46 = &imux46; + i2c47 = &imux47; + }; + + chosen { + stdout-path = &uart1; + bootargs = "debug console=ttyS1,9600n8 root=/dev/ram rw"; + }; +}; + +&wdt2 { + status = "okay"; + aspeed,reset-type = "system"; +}; + +/* + * Both firmware flashes are 64MB on Minipack BMC. + */ +&fmc_flash0 { + partitions { + data0@1c00000 { + reg = <0x1c00000 0x2400000>; + }; + flash0@0 { + reg = <0x0 0x4000000>; + }; + }; +}; + +&fmc_flash1 { + partitions { + flash1@0 { + reg = <0x0 0x4000000>; + }; + }; +}; + +&uart1 { + pinctrl-0 = <&pinctrl_txd1_default + &pinctrl_rxd1_default + &pinctrl_ncts1_default + &pinctrl_ndsr1_default + &pinctrl_ndtr1_default + &pinctrl_nrts1_default>; +}; + +&uart2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd2_default + &pinctrl_rxd2_default>; +}; + +&uart4 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd4_default + &pinctrl_rxd4_default>; +}; + +&i2c0 { + status = "okay"; + bus-frequency = <400000>; + multi-master; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; + + i2c-switch@70 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x70>; + + imux16: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + imux17: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + imux18: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + imux19: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + imux20: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + imux21: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + imux22: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + imux23: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; +}; + +&i2c3 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; + multi-master; +}; + +&i2c5 { + status = "okay"; +}; + +&i2c6 { + status = "okay"; +}; + +&i2c7 { + status = "okay"; +}; + +&i2c8 { + status = "okay"; + + i2c-switch@70 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x70>; + + imux24: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + imux25: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + imux26: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + imux27: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + imux28: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + imux29: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + imux30: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + imux31: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; +}; + +&i2c9 { + status = "okay"; + + i2c-switch@70 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x70>; + + imux32: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + imux33: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + imux34: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + imux35: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + imux36: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + imux37: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + imux38: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + imux39: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; +}; + +&i2c10 { + status = "okay"; +}; + +&i2c11 { + status = "okay"; + + i2c-switch@70 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x70>; + + imux40: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + imux41: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + imux42: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + imux43: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + imux44: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + imux45: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + imux46: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + imux47: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; +}; + +&i2c12 { + status = "okay"; +}; + +&i2c13 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts index c4521eda787c..5d7cbd9164d4 100644 --- a/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts @@ -12,6 +12,27 @@ aliases { serial0 = &uart1; serial4 = &uart5; + + /* + * Hardcode the bus number of i2c switches' channels to + * avoid breaking the legacy applications. + */ + i2c16 = &imux16; + i2c17 = &imux17; + i2c18 = &imux18; + i2c19 = &imux19; + i2c20 = &imux20; + i2c21 = &imux21; + i2c22 = &imux22; + i2c23 = &imux23; + i2c24 = &imux24; + i2c25 = &imux25; + i2c26 = &imux26; + i2c27 = &imux27; + i2c28 = &imux28; + i2c29 = &imux29; + i2c30 = &imux30; + i2c31 = &imux31; }; chosen { stdout-path = &uart5; @@ -25,13 +46,9 @@ iio-hwmon { compatible = "iio-hwmon"; io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, - <&adc 4>, <&adc 5>, <&adc 6>; + <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>; }; - iio-hwmon-battery { - compatible = "iio-hwmon"; - io-channels = <&adc 7>; - }; }; &fmc { @@ -109,6 +126,9 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rmii1_default>; + clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>, + <&syscon ASPEED_CLK_MAC1RCLK>; + clock-names = "MACCLK", "RCLK"; use-ncsi; }; @@ -124,6 +144,215 @@ &i2c1 { status = "okay"; //X24 Riser + i2c-switch@71 { + compatible = "nxp,pca9544"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x71>; + + imux16: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + ina230@45 { + compatible = "ti,ina230"; + reg = <0x45>; + }; + + tmp75@48 { + compatible = "ti,tmp75"; + reg = <0x48>; + }; + + tmp421@49 { + compatible = "ti,tmp75"; + reg = <0x49>; + }; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + pagesize = <32>; + }; + + i2c-switch@73 { + compatible = "nxp,pca9546"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x73>; + + imux20: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + imux21: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + imux22: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + imux23: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + }; + + }; + + imux17: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + ina230@45 { + compatible = "ti,ina230"; + reg = <0x45>; + }; + + tmp421@48 { + compatible = "ti,tmp75"; + reg = <0x48>; + }; + + tmp421@49 { + compatible = "ti,tmp75"; + reg = <0x49>; + }; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + pagesize = <32>; + }; + + i2c-switch@73 { + compatible = "nxp,pca9546"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x73>; + + imux24: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + imux25: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + imux26: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + imux27: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + }; + + }; + + imux18: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + ina230@45 { + compatible = "ti,ina230"; + reg = <0x45>; + }; + + tmp421@48 { + compatible = "ti,tmp75"; + reg = <0x48>; + }; + + tmp421@49 { + compatible = "ti,tmp75"; + reg = <0x49>; + }; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + pagesize = <32>; + }; + + i2c-switch@73 { + compatible = "nxp,pca9546"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x73>; + + imux28: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + imux29: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + imux30: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + imux31: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + }; + + }; + + imux19: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + i2c-switch@40 { + compatible = "ti,ina230"; + reg = <0x40>; + }; + + i2c-switch@41 { + compatible = "ti,ina230"; + reg = <0x41>; + }; + + i2c-switch@45 { + compatible = "ti,ina230"; + reg = <0x45>; + }; + + }; + + }; }; &i2c2 { @@ -144,6 +373,42 @@ &i2c5 { status = "okay"; // CPU Voltage regulators + regulator@48 { + compatible = "infineon,pxe1610"; + reg = <0x48>; + }; + regulator@4a { + compatible = "infineon,pxe1610"; + reg = <0x4a>; + }; + regulator@50 { + compatible = "infineon,pxe1610"; + reg = <0x50>; + }; + regulator@52 { + compatible = "infineon,pxe1610"; + reg = <0x52>; + }; + regulator@58 { + compatible = "infineon,pxe1610"; + reg = <0x58>; + }; + regulator@5a { + compatible = "infineon,pxe1610"; + reg = <0x5a>; + }; + regulator@68 { + compatible = "infineon,pxe1610"; + reg = <0x68>; + }; + regulator@70 { + compatible = "infineon,pxe1610"; + reg = <0x70>; + }; + regulator@72 { + compatible = "infineon,pxe1610"; + reg = <0x72>; + }; }; &i2c6 { diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-wedge100.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-wedge100.dts new file mode 100644 index 000000000000..322587b7b67d --- /dev/null +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-wedge100.dts @@ -0,0 +1,148 @@ +// SPDX-License-Identifier: GPL-2.0+ +// Copyright (c) 2018 Facebook Inc. +/dts-v1/; + +#include "aspeed-g4.dtsi" + +/ { + model = "Facebook Wedge 100 BMC"; + compatible = "facebook,wedge100-bmc", "aspeed,ast2400"; + + aliases { + /* + * Override the default uart aliases to avoid breaking + * the legacy applications. + */ + serial0 = &uart5; + serial1 = &uart1; + serial2 = &uart3; + serial3 = &uart4; + }; + + chosen { + stdout-path = &uart3; + bootargs = "console=ttyS2,9600n8 root=/dev/ram rw"; + }; + + memory@40000000 { + reg = <0x40000000 0x20000000>; + }; +}; + +&wdt1 { + status = "okay"; + aspeed,reset-type = "system"; +}; + +&wdt2 { + status = "okay"; + aspeed,reset-type = "system"; +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "fmc0"; +#include "facebook-bmc-flash-layout.dtsi" + }; +}; + +&uart1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd1_default + &pinctrl_rxd1_default>; +}; + +&uart3 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd3_default + &pinctrl_rxd3_default>; +}; + +&uart4 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd4_default + &pinctrl_rxd4_default>; +}; + +&uart5 { + status = "okay"; +}; + +&mac1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>; +}; + +&i2c0 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; +}; + +&i2c5 { + status = "okay"; +}; + +&i2c6 { + status = "okay"; +}; + +&i2c7 { + status = "okay"; + + i2c-switch@70 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x70>; + }; +}; + +&i2c8 { + status = "okay"; +}; + +&i2c9 { + status = "okay"; +}; + +&i2c10 { + status = "okay"; +}; + +&i2c11 { + status = "okay"; +}; + +&i2c12 { + status = "okay"; +}; + +&i2c13 { + status = "okay"; +}; + +&vhub { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-wedge40.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-wedge40.dts new file mode 100644 index 000000000000..54e508530dce --- /dev/null +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-wedge40.dts @@ -0,0 +1,140 @@ +// SPDX-License-Identifier: GPL-2.0+ +// Copyright (c) 2018 Facebook Inc. +/dts-v1/; + +#include "aspeed-g4.dtsi" + +/ { + model = "Facebook Wedge 40 BMC"; + compatible = "facebook,wedge40-bmc", "aspeed,ast2400"; + + aliases { + /* + * Override the default uart aliases to avoid breaking + * the legacy applications. + */ + serial0 = &uart5; + serial1 = &uart1; + serial2 = &uart3; + serial3 = &uart4; + }; + + chosen { + stdout-path = &uart3; + bootargs = "console=ttyS2,9600n8 root=/dev/ram rw"; + }; + + memory@40000000 { + reg = <0x40000000 0x20000000>; + }; +}; + +&wdt1 { + status = "okay"; + aspeed,reset-type = "system"; +}; + +&wdt2 { + status = "disabled"; +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "fmc0"; +#include "facebook-bmc-flash-layout.dtsi" + }; +}; + +&uart1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd1_default + &pinctrl_rxd1_default>; +}; + +&uart3 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd3_default + &pinctrl_rxd3_default>; +}; + +&uart4 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd4_default + &pinctrl_rxd4_default>; +}; + +&uart5 { + status = "okay"; +}; + +&mac1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>; +}; + +&i2c0 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; +}; + +&i2c5 { + status = "okay"; +}; + +&i2c6 { + status = "okay"; +}; + +&i2c7 { + status = "okay"; +}; + +&i2c8 { + status = "okay"; +}; + +&i2c9 { + status = "okay"; +}; + +&i2c10 { + status = "okay"; +}; + +&i2c11 { + status = "okay"; +}; + +&i2c12 { + status = "okay"; +}; + +&i2c13 { + status = "okay"; +}; + +&vhub { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-yamp.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-yamp.dts index 4e09a9cf32b7..fe2e11c2da15 100644 --- a/arch/arm/boot/dts/aspeed-bmc-facebook-yamp.dts +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-yamp.dts @@ -2,7 +2,7 @@ // Copyright (c) 2018 Facebook Inc. /dts-v1/; -#include "aspeed-g5.dtsi" +#include "ast2500-facebook-netbmc-common.dtsi" / { model = "Facebook YAMP 100 BMC"; @@ -23,47 +23,6 @@ stdout-path = &uart5; bootargs = "console=ttyS0,9600n8 root=/dev/ram rw"; }; - - memory@80000000 { - reg = <0x80000000 0x20000000>; - }; -}; - -&pinctrl { - aspeed,external-nodes = <&gfx &lhc>; -}; - -/* - * Update reset type to "system" (full chip) to fix warm reboot hang issue - * when reset type is set to default ("soc", gated by reset mask registers). - */ -&wdt1 { - status = "okay"; - aspeed,reset-type = "system"; -}; - -/* - * wdt2 is not used by Yamp. - */ -&wdt2 { - status = "disabled"; -}; - -&fmc { - status = "okay"; - flash@0 { - status = "okay"; - m25p,fast-read; - label = "bmc"; -#include "facebook-bmc-flash-layout.dtsi" - }; -}; - -&uart1 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_txd1_default - &pinctrl_rxd1_default>; }; &uart2 { @@ -73,23 +32,18 @@ &pinctrl_rxd2_default>; }; -&uart3 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_txd3_default - &pinctrl_rxd3_default>; -}; - -&uart5 { - status = "okay"; -}; - &mac0 { status = "okay"; use-ncsi; - no-hw-checksum; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rmii1_default>; + clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>, + <&syscon ASPEED_CLK_MAC1RCLK>; + clock-names = "MACCLK", "RCLK"; +}; + +&mac1 { + status = "disabled"; }; &i2c0 { @@ -154,7 +108,3 @@ &i2c13 { status = "okay"; }; - -&vhub { - status = "okay"; -}; diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts new file mode 100644 index 000000000000..6232cd726a7f --- /dev/null +++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts @@ -0,0 +1,597 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +// Copyright 2019 IBM Corp. +/dts-v1/; + +#include "aspeed-g6.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> + +/ { + model = "Rainier"; + compatible = "ibm,rainier-bmc", "aspeed,ast2600"; + + aliases { + serial4 = &uart5; + }; + + chosen { + stdout-path = &uart5; + bootargs = "console=ttyS4,115200n8"; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x40000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + flash_memory: region@B8000000 { + no-map; + reg = <0xB8000000 0x04000000>; /* 64M */ + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + ps0-presence { + label = "ps0-presence"; + gpios = <&gpio0 ASPEED_GPIO(S, 0) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(S, 0)>; + }; + + ps1-presence { + label = "ps1-presence"; + gpios = <&gpio0 ASPEED_GPIO(S, 1) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(S, 1)>; + }; + + ps2-presence { + label = "ps2-presence"; + gpios = <&gpio0 ASPEED_GPIO(S, 2) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(S, 2)>; + }; + + ps3-presence { + label = "ps3-presence"; + gpios = <&gpio0 ASPEED_GPIO(S, 3) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(S, 3)>; + }; + }; + +}; + +&emmc_controller { + status = "okay"; +}; + +&emmc { + status = "okay"; +}; + +&ibt { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; + + power-supply@68 { + compatible = "ibm,cffps"; + reg = <0x68>; + }; + + power-supply@69 { + compatible = "ibm,cffps"; + reg = <0x69>; + }; + + power-supply@6a { + compatible = "ibm,cffps"; + reg = <0x6a>; + }; + + power-supply@6b { + compatible = "ibm,cffps"; + reg = <0x6b>; + }; +}; + +&i2c4 { + status = "okay"; + + tmp275@48 { + compatible = "ti,tmp275"; + reg = <0x48>; + }; + + tmp275@49 { + compatible = "ti,tmp275"; + reg = <0x49>; + }; + + tmp275@4a { + compatible = "ti,tmp275"; + reg = <0x4a>; + }; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; + + eeprom@52 { + compatible = "atmel,24c64"; + reg = <0x52>; + }; +}; + +&i2c5 { + status = "okay"; + + tmp275@48 { + compatible = "ti,tmp275"; + reg = <0x48>; + }; + + tmp275@49 { + compatible = "ti,tmp275"; + reg = <0x49>; + }; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; +}; + +&i2c6 { + status = "okay"; + + tmp275@48 { + compatible = "ti,tmp275"; + reg = <0x48>; + }; + + tmp275@4a { + compatible = "ti,tmp275"; + reg = <0x4a>; + }; + + tmp275@4b { + compatible = "ti,tmp275"; + reg = <0x4b>; + }; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; + + eeprom@52 { + compatible = "atmel,24c64"; + reg = <0x52>; + }; + + eeprom@53 { + compatible = "atmel,24c64"; + reg = <0x53>; + }; +}; + +&i2c7 { + status = "okay"; + + si7021-a20@20 { + compatible = "silabs,si7020"; + reg = <0x20>; + }; + + tmp275@48 { + compatible = "ti,tmp275"; + reg = <0x48>; + }; + + max31785@52 { + compatible = "maxim,max31785a"; + reg = <0x52>; + #address-cells = <1>; + #size-cells = <0>; + + fan@0 { + compatible = "pmbus-fan"; + reg = <0>; + tach-pulses = <2>; + }; + + fan@1 { + compatible = "pmbus-fan"; + reg = <1>; + tach-pulses = <2>; + }; + + fan@2 { + compatible = "pmbus-fan"; + reg = <2>; + tach-pulses = <2>; + }; + + fan@3 { + compatible = "pmbus-fan"; + reg = <3>; + tach-pulses = <2>; + }; + }; + + pca0: pca9552@61 { + compatible = "nxp,pca9552"; + reg = <0x61>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + gpio@0 { + reg = <0>; + }; + + gpio@1 { + reg = <1>; + }; + + gpio@2 { + reg = <2>; + }; + + gpio@3 { + reg = <3>; + }; + + gpio@4 { + reg = <4>; + }; + + gpio@5 { + reg = <5>; + }; + + gpio@6 { + reg = <6>; + }; + + gpio@7 { + reg = <7>; + }; + + gpio@8 { + reg = <8>; + }; + + gpio@9 { + reg = <9>; + }; + + gpio@10 { + reg = <10>; + }; + + gpio@11 { + reg = <11>; + }; + + gpio@12 { + reg = <12>; + }; + + gpio@13 { + reg = <13>; + }; + + gpio@14 { + reg = <14>; + }; + + gpio@15 { + reg = <15>; + }; + }; + + dps: dps310@76 { + compatible = "infineon,dps310"; + reg = <0x76>; + #io-channel-cells = <0>; + }; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; +}; + +&i2c8 { + status = "okay"; + + ucd90320@11 { + compatible = "ti,ucd90320"; + reg = <0x11>; + }; + + rtc@32 { + compatible = "epson,rx8900"; + reg = <0x32>; + }; + + tmp275@48 { + compatible = "ti,tmp275"; + reg = <0x48>; + }; + + tmp275@4a { + compatible = "ti,tmp275"; + reg = <0x4a>; + }; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; +}; + +&i2c9 { + status = "okay"; + + ir35221@42 { + compatible = "infineon,ir35221"; + reg = <0x42>; + }; + + ir35221@43 { + compatible = "infineon,ir35221"; + reg = <0x43>; + }; + + ir35221@44 { + compatible = "infineon,ir35221"; + reg = <0x44>; + }; + + tmp423a@4c { + compatible = "ti,tmp423"; + reg = <0x4c>; + }; + + tmp423b@4d { + compatible = "ti,tmp423"; + reg = <0x4d>; + }; + + ir35221@72 { + compatible = "infineon,ir35221"; + reg = <0x72>; + }; + + ir35221@73 { + compatible = "infineon,ir35221"; + reg = <0x73>; + }; + + ir35221@74 { + compatible = "infineon,ir35221"; + reg = <0x74>; + }; + + eeprom@50 { + compatible = "atmel,24c128"; + reg = <0x50>; + }; +}; + +&i2c10 { + status = "okay"; + + ir35221@42 { + compatible = "infineon,ir35221"; + reg = <0x42>; + }; + + ir35221@43 { + compatible = "infineon,ir35221"; + reg = <0x43>; + }; + + ir35221@44 { + compatible = "infineon,ir35221"; + reg = <0x44>; + }; + + tmp423a@4c { + compatible = "ti,tmp423"; + reg = <0x4c>; + }; + + tmp423b@4d { + compatible = "ti,tmp423"; + reg = <0x4d>; + }; + + ir35221@72 { + compatible = "infineon,ir35221"; + reg = <0x72>; + }; + + ir35221@73 { + compatible = "infineon,ir35221"; + reg = <0x73>; + }; + + ir35221@74 { + compatible = "infineon,ir35221"; + reg = <0x74>; + }; + + eeprom@50 { + compatible = "atmel,24c128"; + reg = <0x50>; + }; +}; + +&i2c11 { + status = "okay"; + + tmp275@48 { + compatible = "ti,tmp275"; + reg = <0x48>; + }; + + tmp275@49 { + compatible = "ti,tmp275"; + reg = <0x49>; + }; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; +}; + +&i2c12 { + status = "okay"; +}; + +&i2c13 { + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; +}; + +&i2c14 { + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; +}; + +&i2c15 { + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; +}; + +&vuart1 { + status = "okay"; +}; + +&lpc_ctrl { + status = "okay"; + memory-region = <&flash_memory>; +}; + +&mac2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii3_default>; + clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>, + <&syscon ASPEED_CLK_MAC3RCLK>; + clock-names = "MACCLK", "RCLK"; + use-ncsi; +}; + +&mac3 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii4_default>; + clocks = <&syscon ASPEED_CLK_GATE_MAC4CLK>, + <&syscon ASPEED_CLK_MAC4RCLK>; + clock-names = "MACCLK", "RCLK"; + use-ncsi; +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; + spi-max-frequency = <50000000>; +#include "openbmc-flash-layout-128.dtsi" + }; + + flash@1 { + status = "okay"; + m25p,fast-read; + label = "alt-bmc"; + spi-max-frequency = <50000000>; + }; +}; + +&spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; + + flash@0 { + status = "okay"; + m25p,fast-read; + label = "pnor"; + spi-max-frequency = <100000000>; + }; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts b/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts index 628195b66d46..62a3ab4c1866 100644 --- a/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts +++ b/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts @@ -94,8 +94,6 @@ gpio-keys-polled { compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; poll-interval = <1000>; fan0-presence { @@ -148,14 +146,48 @@ }; leds { - compatible = "gpio-leds"; + compatible = "gpio-leds"; + + power { + label = "power"; + /* TODO: dummy gpio */ + gpios = <&gpio ASPEED_GPIO(R, 1) GPIO_ACTIVE_LOW>; + }; + + init-ok { + label = "init-ok"; + gpios = <&gpio ASPEED_GPIO(B, 7) GPIO_ACTIVE_LOW>; + }; - power { - label = "power"; - /* TODO: dummy gpio */ - gpios = <&gpio ASPEED_GPIO(R, 1) GPIO_ACTIVE_LOW>; - }; + front-memory { + label = "front-memory"; + gpios = <&gpio ASPEED_GPIO(F, 4) GPIO_ACTIVE_LOW>; + }; + front-syshot { + label = "front-syshot"; + gpios = <&gpio ASPEED_GPIO(I, 1) GPIO_ACTIVE_LOW>; + }; + + front-syshealth { + label = "front-syshealth"; + gpios = <&gpio ASPEED_GPIO(I, 0) GPIO_ACTIVE_LOW>; + }; + + front-fan { + label = "front-fan"; + gpios = <&gpio ASPEED_GPIO(H, 4) GPIO_ACTIVE_LOW>; + }; + + front-psu { + label = "front-psu"; + gpios = <&gpio ASPEED_GPIO(B, 2) GPIO_ACTIVE_LOW>; + }; + + identify { + label = "identify"; + gpios = <&gpio ASPEED_GPIO(Z, 7) GPIO_ACTIVE_LOW>; + }; }; iio-hwmon-battery { @@ -239,6 +271,9 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rmii1_default>; + clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>, + <&syscon ASPEED_CLK_MAC1RCLK>; + clock-names = "MACCLK", "RCLK"; use-ncsi; }; @@ -725,9 +760,9 @@ reg = <0x58>; }; - power-supply@5a { + power-supply@59 { compatible = "pmbus"; - reg = <0x5a>; + reg = <0x59>; }; }; @@ -749,15 +784,6 @@ aspeed,external-nodes = <&gfx &lhc>; }; -&gpio { - pin_gpio_b7 { - gpio-hog; - gpios = <ASPEED_GPIO(B,7) GPIO_ACTIVE_LOW>; - output-high; - line-name = "BMC_INIT_OK"; - }; -}; - &wdt1 { aspeed,reset-type = "none"; aspeed,external-signal; diff --git a/arch/arm/boot/dts/aspeed-bmc-inspur-on5263m5.dts b/arch/arm/boot/dts/aspeed-bmc-inspur-on5263m5.dts index 2337ee23f5c4..80c92e065a10 100644 --- a/arch/arm/boot/dts/aspeed-bmc-inspur-on5263m5.dts +++ b/arch/arm/boot/dts/aspeed-bmc-inspur-on5263m5.dts @@ -77,6 +77,9 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rmii1_default>; + clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>, + <&syscon ASPEED_CLK_MAC1RCLK>; + clock-names = "MACCLK", "RCLK"; use-ncsi; }; diff --git a/arch/arm/boot/dts/aspeed-bmc-intel-s2600wf.dts b/arch/arm/boot/dts/aspeed-bmc-intel-s2600wf.dts index 22dade6393d0..1deb30ec912c 100644 --- a/arch/arm/boot/dts/aspeed-bmc-intel-s2600wf.dts +++ b/arch/arm/boot/dts/aspeed-bmc-intel-s2600wf.dts @@ -69,6 +69,9 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rmii1_default>; + clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>, + <&syscon ASPEED_CLK_MAC1RCLK>; + clock-names = "MACCLK", "RCLK"; use-ncsi; }; diff --git a/arch/arm/boot/dts/aspeed-bmc-lenovo-hr630.dts b/arch/arm/boot/dts/aspeed-bmc-lenovo-hr630.dts index d3695a32e8e0..c29e5f4d86ad 100644 --- a/arch/arm/boot/dts/aspeed-bmc-lenovo-hr630.dts +++ b/arch/arm/boot/dts/aspeed-bmc-lenovo-hr630.dts @@ -133,6 +133,9 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rmii1_default>; + clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>, + <&syscon ASPEED_CLK_MAC1RCLK>; + clock-names = "MACCLK", "RCLK"; use-ncsi; }; diff --git a/arch/arm/boot/dts/aspeed-bmc-lenovo-hr855xg2.dts b/arch/arm/boot/dts/aspeed-bmc-lenovo-hr855xg2.dts new file mode 100644 index 000000000000..084c455ad4cb --- /dev/null +++ b/arch/arm/boot/dts/aspeed-bmc-lenovo-hr855xg2.dts @@ -0,0 +1,666 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Device Tree file for Lenovo Hr855xg2 platform + * + * Copyright (C) 2019-present Lenovo + */ + +/dts-v1/; + +#include "aspeed-g5.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> + +/ { + model = "HR855XG2 BMC"; + compatible = "lenovo,hr855xg2-bmc", "aspeed,ast2500"; + + aliases { + i2c14 = &i2c_riser1; + i2c15 = &i2c_riser2; + i2c16 = &i2c_riser3; + i2c17 = &i2c_M2; + i2c18 = &channel_0; + i2c19 = &channel_1; + i2c20 = &channel_2; + i2c21 = &channel_3; + }; + + chosen { + stdout-path = &uart5; + bootargs = "console=tty0 console=ttyS4,115200 earlyprintk"; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x20000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + flash_memory: region@98000000 { + no-map; + reg = <0x98000000 0x00100000>; /* 1M */ + }; + + gfx_memory: framebuffer { + size = <0x01000000>; + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; + }; + + leds { + compatible = "gpio-leds"; + + heartbeat { + gpios = <&gpio ASPEED_GPIO(C, 7) GPIO_ACTIVE_LOW>; + }; + + fault { + gpios = <&gpio ASPEED_GPIO(G, 3) GPIO_ACTIVE_LOW>; + }; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, + <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>, + <&adc 8>, <&adc 9>, <&adc 10>,<&adc 11>, + <&adc 12>,<&adc 13>,<&adc 14>; + }; + + iio-hwmon-battery { + compatible = "iio-hwmon"; + io-channels = <&adc 15>; + }; + +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; + spi-max-frequency = <50000000>; +#include "openbmc-flash-layout.dtsi" + }; +}; + +&lpc_ctrl { + status = "okay"; + memory-region = <&flash_memory>; + flash = <&spi1>; +}; + +&lpc_snoop { + status = "okay"; + snoop-ports = <0x80>; +}; + +&uart1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd1_default + &pinctrl_rxd1_default>; +}; + +&uart2 { + /* Rear RS-232 connector */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd2_default + &pinctrl_rxd2_default + &pinctrl_nrts2_default + &pinctrl_ndtr2_default + &pinctrl_ndsr2_default + &pinctrl_ncts2_default + &pinctrl_ndcd2_default + &pinctrl_nri2_default>; +}; + +&uart3 { + status = "okay"; +}; + +&uart5 { + status = "okay"; +}; + +&ibt { + status = "okay"; +}; + +&mac0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii1_default>; + clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>, + <&syscon ASPEED_CLK_MAC1RCLK>; + clock-names = "MACCLK", "RCLK"; + use-ncsi; +}; + +&mac1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>; +}; + +&adc{ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc0_default + &pinctrl_adc1_default + &pinctrl_adc2_default + &pinctrl_adc3_default + &pinctrl_adc4_default + &pinctrl_adc5_default + &pinctrl_adc6_default + &pinctrl_adc7_default + &pinctrl_adc8_default + &pinctrl_adc9_default + &pinctrl_adc10_default + &pinctrl_adc11_default + &pinctrl_adc12_default + &pinctrl_adc13_default + &pinctrl_adc14_default + &pinctrl_adc15_default>; +}; + +&i2c0 { + status = "okay"; + + i2c-switch@70 { + compatible = "nxp,pca9545"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + i2c_riser1: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + i2c_riser2: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + i2c_riser3: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + i2c_M2: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; +}; + +&i2c1 { + status = "okay"; + bus-frequency = <90000>; + HotSwap@10 { + compatible = "adm1272"; + reg = <0x10>; + }; + + VR@45 { + compatible = "pmbus"; + reg = <0x45>; + }; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; + i2c-switch@70 { + compatible = "nxp,pca9546"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + channel_0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + channel_1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + channel_2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + channel_3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; +}; + +&i2c4 { + status = "okay"; +}; + +&i2c5 { + status = "okay"; +}; + +&i2c6 { + status = "okay"; + /* temp1 */ + tmp75@49 { + compatible = "national,lm75"; + reg = <0x49>; + }; + + /* temp2 */ + tmp75@4d { + compatible = "national,lm75"; + reg = <0x4d>; + }; + + eeprom@54 { + compatible = "atmel,24c256"; + reg = <0x54>; + pagesize = <16>; + }; +}; + +&i2c7 { + status = "okay"; +}; + +&i2c8 { + status = "okay"; +}; + +&i2c9 { + status = "okay"; +}; + +&i2c10 { + status = "okay"; +}; + +&i2c11 { + status = "okay"; +}; + +&i2c13 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&uhci { + status = "okay"; +}; + +&gfx { + status = "okay"; + memory-region = <&gfx_memory>; +}; + +&pwm_tacho { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_default + &pinctrl_pwm1_default + &pinctrl_pwm2_default + &pinctrl_pwm3_default + &pinctrl_pwm4_default + &pinctrl_pwm5_default + &pinctrl_pwm6_default + &pinctrl_pwm7_default>; + + fan@0 { + reg = <0x00>; + aspeed,fan-tach-ch = /bits/ 8 <0x00>; + }; + + fan@1 { + reg = <0x00>; + aspeed,fan-tach-ch = /bits/ 8 <0x01>; + }; + + fan@2 { + reg = <0x01>; + aspeed,fan-tach-ch = /bits/ 8 <0x02>; + }; + + fan@3 { + reg = <0x01>; + aspeed,fan-tach-ch = /bits/ 8 <0x03>; + }; + + fan@4 { + reg = <0x02>; + aspeed,fan-tach-ch = /bits/ 8 <0x04>; + }; + + fan@5 { + reg = <0x02>; + aspeed,fan-tach-ch = /bits/ 8 <0x05>; + }; + + fan@6 { + reg = <0x03>; + aspeed,fan-tach-ch = /bits/ 8 <0x06>; + }; + + fan@7 { + reg = <0x03>; + aspeed,fan-tach-ch = /bits/ 8 <0x07>; + }; + + fan@8 { + reg = <0x04>; + aspeed,fan-tach-ch = /bits/ 8 <0x08>; + }; + + fan@9 { + reg = <0x04>; + aspeed,fan-tach-ch = /bits/ 8 <0x09>; + }; + + fan@10 { + reg = <0x05>; + aspeed,fan-tach-ch = /bits/ 8 <0x0a>; + }; + + fan@11 { + reg = <0x05>; + aspeed,fan-tach-ch = /bits/ 8 <0x0b>; + }; + + fan@12 { + reg = <0x06>; + aspeed,fan-tach-ch = /bits/ 8 <0x0c>; + }; + + fan@13 { + reg = <0x06>; + aspeed,fan-tach-ch = /bits/ 8 <0x0d>; + }; + + fan@14 { + reg = <0x07>; + aspeed,fan-tach-ch = /bits/ 8 <0x0e>; + }; + + fan@15 { + reg = <0x07>; + aspeed,fan-tach-ch = /bits/ 8 <0x0f>; + }; + + fan@16 { + reg = <0x07>; + aspeed,fan-tach-ch = /bits/ 8 <0x0f>; + }; +}; + +&gpio { + + pin_gpio_a1 { + gpio-hog; + gpios = <ASPEED_GPIO(A, 1) GPIO_ACTIVE_LOW>; + output-high; + line-name = "BMC_EMMC_RST_N"; + }; + + pin_gpio_a3 { + gpio-hog; + gpios = <ASPEED_GPIO(A, 3) GPIO_ACTIVE_LOW>; + output-high; + line-name = "PCH_PWROK_BMC_FPGA"; + }; + + pin_gpio_b5 { + gpio-hog; + gpios = <ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "IRQ_BMC_PCH_SMI_LPC_N"; + }; + + pin_gpio_b7 { + gpio-hog; + gpios = <ASPEED_GPIO(B, 7) GPIO_ACTIVE_LOW>; + output-low; + line-name = "CPU_SM_WP"; + }; + + pin_gpio_e0 { + gpio-hog; + gpios = <ASPEED_GPIO(E, 0) GPIO_ACTIVE_HIGH>; + input; + line-name = "PDB_PSU_SEL"; + }; + + pin_gpio_e2 { + gpio-hog; + gpios = <ASPEED_GPIO(E, 2) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "LOCATOR_LED_N"; + }; + + pin_gpio_e5 { + gpio-hog; + gpios = <ASPEED_GPIO(E, 5) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "FM_BMC_DBP_PRESENT_R1_N"; + }; + + pin_gpio_e6 { + gpio-hog; + gpios = <ASPEED_GPIO(E, 6) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "BMC_ME_SECURITY_OVERRIDE_N"; + }; + + pin_gpio_f0 { + gpio-hog; + gpios = <ASPEED_GPIO(F, 0) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "IRQ_BMC_PCH_NMI_R"; + }; + + pin_gpio_f1 { + gpio-hog; + gpios = <ASPEED_GPIO(F, 1) GPIO_ACTIVE_HIGH>; + input; + line-name = "CPU2_PROCDIS_BMC_N"; + }; + + pin_gpio_f2 { + gpio-hog; + gpios = <ASPEED_GPIO(F, 2) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "RM_THROTTLE_EN_N"; + }; + + pin_gpio_f3 { + gpio-hog; + gpios = <ASPEED_GPIO(F, 3) GPIO_ACTIVE_HIGH>; + output-low; + line-name = "FM_PMBUS_ALERT_B_EN"; + }; + + pin_gpio_f4 { + gpio-hog; + gpios = <ASPEED_GPIO(F, 4) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "BMC_FORCE_NM_THROTTLE_N"; + }; + + pin_gpio_f6 { + gpio-hog; + gpios = <ASPEED_GPIO(F, 6) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "FM_BMC_CPU_PWR_DEBUG_N"; + }; + + pin_gpio_g7 { + gpio-hog; + gpios = <ASPEED_GPIO(G, 7) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "BMC_PCIE_I2C_MUX_RST_N"; + }; + + pin_gpio_h6 { + gpio-hog; + gpios = <ASPEED_GPIO(H, 6) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "FM_BMC_DBP_PRESENT_R2_N"; + }; + + pin_gpio_i3 { + gpio-hog; + gpios = <ASPEED_GPIO(I, 3) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "SPI_BMC_BIOS_WP_N"; + }; + + pin_gpio_j1 { + gpio-hog; + gpios = <ASPEED_GPIO(J, 1) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "BMC_USB_SEL"; + }; + + pin_gpio_j2 { + gpio-hog; + gpios = <ASPEED_GPIO(J, 2) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "PDB_SMB_RST_N"; + }; + + pin_gpio_j3 { + gpio-hog; + gpios = <ASPEED_GPIO(J, 3) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "SPI_BMC_BIOS_HOLD_N"; + }; + + pin_gpio_l0 { + gpio-hog; + gpios = <ASPEED_GPIO(L, 0) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "PDB_FAN_TACH_SEL"; + }; + + pin_gpio_l1 { + gpio-hog; + gpios = <ASPEED_GPIO(L, 1) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "SYS_RESET_BMC_FPGA_N"; + }; + + pin_gpio_l4 { + gpio-hog; + gpios = <ASPEED_GPIO(L, 4) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "FM_EFUSE_FAN_G1_EN"; + }; + + pin_gpio_l5 { + gpio-hog; + gpios = <ASPEED_GPIO(L, 5) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "FM_EFUSE_FAN_G2_EN"; + }; + + pin_gpio_r6 { + gpio-hog; + gpios = <ASPEED_GPIO(R, 6) GPIO_ACTIVE_HIGH>; + input; + line-name = "CPU3_PROCDIS_BMC_N"; + }; + + pin_gpio_r7 { + gpio-hog; + gpios = <ASPEED_GPIO(R, 7) GPIO_ACTIVE_HIGH>; + input; + line-name = "CPU4_PROCDIS_BMC_N"; + }; + + pin_gpio_s1 { + gpio-hog; + gpios = <ASPEED_GPIO(S, 1) GPIO_ACTIVE_HIGH>; + output-low; + line-name = "DBP_SYSPWROK_BMC"; + }; + + pin_gpio_s2 { + gpio-hog; + gpios = <ASPEED_GPIO(S, 2) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "PCH_RST_RSMRST_N"; + }; + + pin_gpio_s6 { + gpio-hog; + gpios = <ASPEED_GPIO(S, 6) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "BMC_HW_STRAP_5"; + }; + + pin_gpio_z3 { + gpio-hog; + gpios = <ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "FM_BMC_PCH_SCI_LPC_N"; + }; + + pin_gpio_aa0 { + gpio-hog; + gpios = <ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>; + output-low; + line-name = "FW_PSU_ALERT_EN_N"; + }; + + pin_gpio_aa4 { + gpio-hog; + gpios = <ASPEED_GPIO(AA, 4) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "DBP_CPU_PREQ_N"; + }; + + pin_gpio_ab3 { + gpio-hog; + gpios = <ASPEED_GPIO(AB, 3) GPIO_ACTIVE_HIGH>; + output-low; + line-name = "BMC_WDTRST"; + }; + + pin_gpio_ac6 { + gpio-hog; + gpios = <ASPEED_GPIO(AC, 6) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "ESPI_BMC_ALERT_N"; + }; + +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-lanyang.dts b/arch/arm/boot/dts/aspeed-bmc-opp-lanyang.dts index de95112e2a04..42b37a204241 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-lanyang.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-lanyang.dts @@ -178,6 +178,9 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rmii1_default>; + clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>, + <&syscon ASPEED_CLK_MAC1RCLK>; + clock-names = "MACCLK", "RCLK"; use-ncsi; }; diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts b/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts new file mode 100644 index 000000000000..f7e935ede919 --- /dev/null +++ b/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts @@ -0,0 +1,921 @@ +// SPDX-License-Identifier: GPL-2.0+ +/dts-v1/; +#include "aspeed-g5.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> +#include <dt-bindings/leds/leds-pca955x.h> + +/ { + model = "Mihawk BMC"; + compatible = "ibm,mihawk-bmc", "aspeed,ast2500"; + + + chosen { + stdout-path = &uart5; + bootargs = "console=ttyS4,115200 earlyprintk"; + }; + + memory@80000000 { + reg = <0x80000000 0x20000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + flash_memory: region@98000000 { + no-map; + reg = <0x98000000 0x04000000>; /* 64M */ + }; + + gfx_memory: framebuffer { + size = <0x01000000>; + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; + + video_engine_memory: jpegbuffer { + size = <0x02000000>; + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + air-water { + label = "air-water"; + gpios = <&gpio ASPEED_GPIO(F, 6) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(F, 6)>; + }; + + checkstop { + label = "checkstop"; + gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(J, 2)>; + }; + + ps0-presence { + label = "ps0-presence"; + gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(Z, 2)>; + }; + + ps1-presence { + label = "ps1-presence"; + gpios = <&gpio ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(Z, 0)>; + }; + id-button { + label = "id-button"; + gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(F, 1)>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + poll-interval = <1000>; + + fan0-presence { + label = "fan0-presence"; + gpios = <&pca9552 9 GPIO_ACTIVE_LOW>; + linux,code = <9>; + }; + + fan1-presence { + label = "fan1-presence"; + gpios = <&pca9552 10 GPIO_ACTIVE_LOW>; + linux,code = <10>; + }; + + fan2-presence { + label = "fan2-presence"; + gpios = <&pca9552 11 GPIO_ACTIVE_LOW>; + linux,code = <11>; + }; + + fan3-presence { + label = "fan3-presence"; + gpios = <&pca9552 12 GPIO_ACTIVE_LOW>; + linux,code = <12>; + }; + + fan4-presence { + label = "fan4-presence"; + gpios = <&pca9552 13 GPIO_ACTIVE_LOW>; + linux,code = <13>; + }; + + fan5-presence { + label = "fan5-presence"; + gpios = <&pca9552 14 GPIO_ACTIVE_LOW>; + linux,code = <14>; + }; + }; + + leds { + compatible = "gpio-leds"; + + fault { + retain-state-shutdown; + default-state = "keep"; + gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_LOW>; + }; + + power { + retain-state-shutdown; + default-state = "keep"; + gpios = <&gpio ASPEED_GPIO(AA, 1) GPIO_ACTIVE_LOW>; + }; + + rear-id { + retain-state-shutdown; + default-state = "keep"; + gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_LOW>; + }; + + rear-g { + retain-state-shutdown; + default-state = "keep"; + gpios = <&gpio ASPEED_GPIO(AA, 4) GPIO_ACTIVE_LOW>; + }; + + rear-ok { + retain-state-shutdown; + default-state = "keep"; + gpios = <&gpio ASPEED_GPIO(Y, 0) GPIO_ACTIVE_LOW>; + }; + + fan0 { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca9552 0 GPIO_ACTIVE_LOW>; + }; + + fan1 { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca9552 1 GPIO_ACTIVE_LOW>; + }; + + fan2 { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca9552 2 GPIO_ACTIVE_LOW>; + }; + + fan3 { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca9552 3 GPIO_ACTIVE_LOW>; + }; + + fan4 { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca9552 4 GPIO_ACTIVE_LOW>; + }; + + fan5 { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca9552 5 GPIO_ACTIVE_LOW>; + }; + }; + + fsi: gpio-fsi { + compatible = "fsi-master-gpio", "fsi-master"; + #address-cells = <2>; + #size-cells = <0>; + no-gpio-delays; + + clock-gpios = <&gpio ASPEED_GPIO(E, 6) GPIO_ACTIVE_HIGH>; + data-gpios = <&gpio ASPEED_GPIO(E, 7) GPIO_ACTIVE_HIGH>; + mux-gpios = <&gpio ASPEED_GPIO(E, 5) GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>; + trans-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_HIGH>; + }; + iio-hwmon-12v { + compatible = "iio-hwmon"; + io-channels = <&adc 0>; + }; + + iio-hwmon-5v { + compatible = "iio-hwmon"; + io-channels = <&adc 1>; + }; + + iio-hwmon-3v { + compatible = "iio-hwmon"; + io-channels = <&adc 2>; + }; + + iio-hwmon-vdd0 { + compatible = "iio-hwmon"; + io-channels = <&adc 3>; + }; + + iio-hwmon-vdd1 { + compatible = "iio-hwmon"; + io-channels = <&adc 4>; + }; + + iio-hwmon-vcs0 { + compatible = "iio-hwmon"; + io-channels = <&adc 5>; + }; + + iio-hwmon-vcs1 { + compatible = "iio-hwmon"; + io-channels = <&adc 6>; + }; + + iio-hwmon-vdn0 { + compatible = "iio-hwmon"; + io-channels = <&adc 7>; + }; + + iio-hwmon-vdn1 { + compatible = "iio-hwmon"; + io-channels = <&adc 8>; + }; + + iio-hwmon-vio0 { + compatible = "iio-hwmon"; + io-channels = <&adc 9>; + }; + + iio-hwmon-vio1 { + compatible = "iio-hwmon"; + io-channels = <&adc 10>; + }; + + iio-hwmon-vddra { + compatible = "iio-hwmon"; + io-channels = <&adc 11>; + }; + + iio-hwmon-battery { + compatible = "iio-hwmon"; + io-channels = <&adc 12>; + }; + + iio-hwmon-vddrb { + compatible = "iio-hwmon"; + io-channels = <&adc 13>; + }; + + iio-hwmon-vddrc { + compatible = "iio-hwmon"; + io-channels = <&adc 14>; + }; + + iio-hwmon-vddrd { + compatible = "iio-hwmon"; + io-channels = <&adc 15>; + }; +}; + +&pwm_tacho { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default + &pinctrl_pwm2_default &pinctrl_pwm3_default + &pinctrl_pwm4_default &pinctrl_pwm5_default>; + + fan@0 { + reg = <0x00>; + aspeed,fan-tach-ch = /bits/ 8 <0x00>; + }; + + fan@1 { + reg = <0x01>; + aspeed,fan-tach-ch = /bits/ 8 <0x01>; + }; + + fan@2 { + reg = <0x02>; + aspeed,fan-tach-ch = /bits/ 8 <0x02>; + }; + + fan@3 { + reg = <0x03>; + aspeed,fan-tach-ch = /bits/ 8 <0x03>; + }; + + fan@4 { + reg = <0x04>; + aspeed,fan-tach-ch = /bits/ 8 <0x04>; + }; + + fan@5 { + reg = <0x05>; + aspeed,fan-tach-ch = /bits/ 8 <0x05>; + }; + + fan@6 { + reg = <0x00>; + aspeed,fan-tach-ch = /bits/ 8 <0x06>; + }; + + fan@7 { + reg = <0x01>; + aspeed,fan-tach-ch = /bits/ 8 <0x07>; + }; + + fan@8 { + reg = <0x02>; + aspeed,fan-tach-ch = /bits/ 8 <0x08>; + }; + + fan@9 { + reg = <0x03>; + aspeed,fan-tach-ch = /bits/ 8 <0x09>; + }; + + fan@10 { + reg = <0x04>; + aspeed,fan-tach-ch = /bits/ 8 <0x0a>; + }; + + fan@11 { + reg = <0x05>; + aspeed,fan-tach-ch = /bits/ 8 <0x0b>; + }; +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + label = "bmc"; + m25p,fast-read; + spi-max-frequency = <50000000>; + partitions { + #address-cells = < 1 >; + #size-cells = < 1 >; + compatible = "fixed-partitions"; + u-boot@0 { + reg = < 0 0x60000 >; + label = "u-boot"; + }; + u-boot-env@60000 { + reg = < 0x60000 0x20000 >; + label = "u-boot-env"; + }; + obmc-ubi@80000 { + reg = < 0x80000 0x1F80000 >; + label = "obmc-ubi"; + }; + }; + }; + flash@1 { + status = "okay"; + label = "alt-bmc"; + m25p,fast-read; + spi-max-frequency = <50000000>; + partitions { + #address-cells = < 1 >; + #size-cells = < 1 >; + compatible = "fixed-partitions"; + u-boot@0 { + reg = < 0 0x60000 >; + label = "alt-u-boot"; + }; + u-boot-env@60000 { + reg = < 0x60000 0x20000 >; + label = "alt-u-boot-env"; + }; + obmc-ubi@80000 { + reg = < 0x80000 0x1F80000 >; + label = "alt-obmc-ubi"; + }; + }; + }; +}; + +&spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; + + flash@0 { + status = "okay"; + label = "pnor"; + m25p,fast-read; + spi-max-frequency = <100000000>; + }; +}; + +&lpc_ctrl { + status = "okay"; + memory-region = <&flash_memory>; + flash = <&spi1>; +}; + +&uart1 { + /* Rear RS-232 connector */ + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd1_default + &pinctrl_rxd1_default + &pinctrl_nrts1_default + &pinctrl_ndtr1_default + &pinctrl_ndsr1_default + &pinctrl_ncts1_default + &pinctrl_ndcd1_default + &pinctrl_nri1_default>; +}; + +&uart2 { + /* APSS */ + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>; +}; + +&uart5 { + status = "okay"; +}; + +&mac0 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii1_default>; + clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>, + <&syscon ASPEED_CLK_MAC1RCLK>; + clock-names = "MACCLK", "RCLK"; + use-ncsi; +}; + +&mac1 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>; +}; + +&i2c0 { + status = "disabled"; +}; + +&i2c1 { + status = "disabled"; +}; + +&i2c2 { + status = "okay"; + + /* SAMTEC P0 */ + /* SAMTEC P1 */ + +}; + +&i2c3 { + status = "okay"; + + /* APSS */ + /* CPLD */ + + /* PCA9516 (repeater) -> + * CLK Buffer 9FGS9092 + * CLK Buffer 9DBL0651BKILFT + * CLK Buffer 9DBL0651BKILFT + * Power Supply 0 + * Power Supply 1 + * PCA 9552 LED + */ + + power-supply@58 { + compatible = "ibm,cffps1"; + reg = <0x58>; + }; + + power-supply@5b { + compatible = "ibm,cffps1"; + reg = <0x5b>; + }; + + pca9552: pca9552@60 { + compatible = "nxp,pca9552"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + gpio@0 { + reg = <0>; + type = <PCA955X_TYPE_GPIO>; + }; + gpio@1 { + reg = <1>; + type = <PCA955X_TYPE_GPIO>; + }; + gpio@2 { + reg = <2>; + type = <PCA955X_TYPE_GPIO>; + }; + gpio@3 { + reg = <3>; + type = <PCA955X_TYPE_GPIO>; + }; + gpio@4 { + reg = <4>; + type = <PCA955X_TYPE_GPIO>; + }; + gpio@5 { + reg = <5>; + type = <PCA955X_TYPE_GPIO>; + }; + gpio@6 { + reg = <6>; + type = <PCA955X_TYPE_GPIO>; + }; + gpio@7 { + reg = <7>; + type = <PCA955X_TYPE_GPIO>; + }; + gpio@8 { + reg = <8>; + type = <PCA955X_TYPE_GPIO>; + }; + gpio@9 { + reg = <9>; + type = <PCA955X_TYPE_GPIO>; + }; + gpio@10 { + reg = <10>; + type = <PCA955X_TYPE_GPIO>; + }; + gpio@11 { + reg = <11>; + type = <PCA955X_TYPE_GPIO>; + }; + gpio@12 { + reg = <12>; + type = <PCA955X_TYPE_GPIO>; + }; + gpio@13 { + reg = <13>; + type = <PCA955X_TYPE_GPIO>; + }; + gpio@14 { + reg = <14>; + type = <PCA955X_TYPE_GPIO>; + }; + gpio@15 { + reg = <15>; + type = <PCA955X_TYPE_GPIO>; + }; + + }; + +}; + +&i2c4 { + status = "okay"; + + /* CP0 VDD & VCS : IR35221 */ + /* CP0 VDN : IR35221 */ + /* CP0 VIO : IR38064 */ + /* CP0 VDDR : PXM1330 */ + + ir35221@70 { + compatible = "infineon,ir35221"; + reg = <0x70>; + }; + + ir35221@72 { + compatible = "infineon,ir35221"; + reg = <0x72>; + }; + +}; + +&i2c5 { + status = "okay"; + + /* CP0 VDD & VCS : IR35221 */ + /* CP0 VDN : IR35221 */ + /* CP0 VIO : IR38064 */ + /* CP0 VDDR : PXM1330 */ + + ir35221@70 { + compatible = "infineon,ir35221"; + reg = <0x70>; + }; + + ir35221@72 { + compatible = "infineon,ir35221"; + reg = <0x72>; + }; + +}; + +&i2c6 { + status = "okay"; + + /* pca9548 -> NVMe1 to 8 */ + + pca9548@70 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x70>; + }; + +}; + +&i2c7 { + status = "okay"; + + /* pca9548 -> NVMe9 to 16 */ + + pca9548@70 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x70>; + }; + +}; + +&i2c8 { + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; +}; + +&i2c9 { + status = "okay"; + + /* pca9545 Riser -> + * PCIe x8 Slot3 + * PCIe x16 slot4 + * PCIe x8 slot5 + * I2C BMC RISER PCA9554 + * BMC SCL/SDA PCA9554 + * PCA9554 + */ + + /* pca9545 -> + * PCIe x16 Slot1 + * PCIe x8 slot2 + * PEX8748 + */ + + pca9545riser@70 { + compatible = "nxp,pca9545"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x70>; + + i2c-mux-idle-disconnect; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pca9545@71 { + compatible = "nxp,pca9545"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x71>; + + i2c-mux-idle-disconnect; + interrupt-controller; + #interrupt-cells = <2>; + }; +}; + +&i2c10 { + status = "okay"; + + /* pca9545 Riser -> + * PCIe x8 Slot8 + * PCIe x16 slot9 + * PCIe x8 slot10 + * I2C BMC RISER PCA9554 + * BMC SCL/SDA PCA9554 + * PCA9554 + */ + + /* pca9545 -> + * PCIe x16 Slot1 + * PCIe x8 slot2 + * PEX8748 + */ + + pca9545riser@70 { + compatible = "nxp,pca9545"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x70>; + + i2c-mux-idle-disconnect; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pca9545@71 { + compatible = "nxp,pca9545"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x71>; + + i2c-mux-idle-disconnect; + interrupt-controller; + #interrupt-cells = <2>; + }; +}; + +&i2c11 { + status = "okay"; + + /* TPM */ + /* RTC RX8900CE */ + /* FPGA for power sequence */ + /* TMP275A */ + /* TMP275A */ + /* EMC1462 */ + + tpm@57 { + compatible = "infineon,slb9645tt"; + reg = <0x57>; + }; + + rtc@32 { + compatible = "epson,rx8900"; + reg = <0x32>; + }; + + tmp275@48 { + compatible = "ti,tmp275"; + reg = <0x48>; + }; + + tmp275@49 { + compatible = "ti,tmp275"; + reg = <0x49>; + }; + + /* chip emc1462 use emc1403 driver */ + emc1403@4c { + compatible = "smsc,emc1403"; + reg = <0x4c>; + }; + +}; + +&i2c12 { + status = "okay"; + + /* pca9545 -> + * SAS BP1 + * SAS BP2 + * NVMe BP + * M.2 riser + */ + + pca9545@70 { + compatible = "nxp,pca9545"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x70>; + + interrupt-controller; + #interrupt-cells = <2>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + }; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + tmp275@48 { + compatible = "ti,tmp275"; + reg = <0x48>; + }; + }; + + }; + +}; + +&i2c13 { + status = "okay"; + + /* pca9548 -> + * NVMe BP + * NVMe HDD17 to 24 + */ + + pca9548@70 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x70>; + }; +}; + +&vuart { + status = "okay"; +}; + +&gfx { + status = "okay"; + memory-region = <&gfx_memory>; +}; + +&adc { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc0_default + &pinctrl_adc1_default + &pinctrl_adc2_default + &pinctrl_adc3_default + &pinctrl_adc4_default + &pinctrl_adc5_default + &pinctrl_adc6_default + &pinctrl_adc7_default + &pinctrl_adc8_default + &pinctrl_adc9_default + &pinctrl_adc10_default + &pinctrl_adc11_default + &pinctrl_adc12_default + &pinctrl_adc13_default + &pinctrl_adc14_default + &pinctrl_adc15_default>; +}; + +&wdt1 { + aspeed,reset-type = "none"; + aspeed,external-signal; + aspeed,ext-push-pull; + aspeed,ext-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdtrst1_default>; +}; + +&wdt2 { + aspeed,alt-boot; +}; + +&ibt { + status = "okay"; +}; + +&vhub { + status = "okay"; +}; + +&video { + status = "okay"; + memory-region = <&video_engine_memory>; +}; + +#include "ibm-power9-dual.dtsi" + diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts index b0cb34ccb135..eb4e93a57ff4 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts @@ -87,6 +87,7 @@ status = "okay"; m25p,fast-read; label = "bmc"; + spi-max-frequency = <50000000>; #include "openbmc-flash-layout.dtsi" }; }; @@ -99,6 +100,7 @@ flash@0 { status = "okay"; m25p,fast-read; + spi-max-frequency = <50000000>; label = "pnor"; }; }; diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts index 9628ecb879cf..edfa44fe1f75 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts @@ -112,6 +112,7 @@ status = "okay"; m25p,fast-read; label = "bmc"; + spi-max-frequency = <50000000>; #include "openbmc-flash-layout.dtsi" }; }; @@ -125,6 +126,7 @@ status = "okay"; m25p,fast-read; label = "pnor"; + spi-max-frequency = <100000000>; }; }; @@ -160,6 +162,9 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rmii1_default>; + clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>, + <&syscon ASPEED_CLK_MAC1RCLK>; + clock-names = "MACCLK", "RCLK"; }; &i2c1 { diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-swift.dts b/arch/arm/boot/dts/aspeed-bmc-opp-swift.dts index caac895c60b4..d56b5ed09b37 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-swift.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-swift.dts @@ -82,8 +82,6 @@ gpio-keys-polled { compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; poll-interval = <1000>; scm0-presence { @@ -207,8 +205,8 @@ #size-cells = <0>; no-gpio-delays; - clock-gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>; - data-gpios = <&gpio ASPEED_GPIO(E, 0) GPIO_ACTIVE_HIGH>; + clock-gpios = <&gpio ASPEED_GPIO(P, 1) GPIO_ACTIVE_HIGH>; + data-gpios = <&gpio ASPEED_GPIO(P, 2) GPIO_ACTIVE_HIGH>; mux-gpios = <&gpio ASPEED_GPIO(P, 4) GPIO_ACTIVE_HIGH>; enable-gpios = <&gpio ASPEED_GPIO(P, 0) GPIO_ACTIVE_HIGH>; trans-gpios = <&gpio ASPEED_GPIO(P, 3) GPIO_ACTIVE_HIGH>; @@ -322,6 +320,9 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rmii1_default>; use-ncsi; + clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>, + <&syscon ASPEED_CLK_MAC1RCLK>; + clock-names = "MACCLK", "RCLK"; }; &i2c2 { @@ -494,7 +495,7 @@ }; power-supply@68 { - compatible = "ibm,cffps1"; + compatible = "ibm,cffps2"; reg = <0x68>; }; @@ -504,7 +505,7 @@ }; power-supply@69 { - compatible = "ibm,cffps1"; + compatible = "ibm,cffps2"; reg = <0x69>; }; @@ -963,4 +964,15 @@ status = "okay"; }; +&sdmmc { + status = "okay"; +}; + +&sdhci1 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sd2_default>; +}; + #include "ibm-power9-dual.dtsi" diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts b/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts new file mode 100644 index 000000000000..ff49ec76fa7c --- /dev/null +++ b/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts @@ -0,0 +1,802 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +// Copyright 2019 IBM Corp. +/dts-v1/; + +#include "aspeed-g6.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> +#include <dt-bindings/leds/leds-pca955x.h> + +/ { + model = "Tacoma"; + compatible = "ibm,tacoma-bmc", "aspeed,ast2600"; + + chosen { + stdout-path = &uart5; + bootargs = "console=ttyS4,115200n8"; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x40000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + flash_memory: region@ba000000 { + no-map; + reg = <0xb8000000 0x4000000>; /* 64M */ + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + air-water { + label = "air-water"; + gpios = <&gpio0 ASPEED_GPIO(Q, 7) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(Q, 7)>; + }; + + checkstop { + label = "checkstop"; + gpios = <&gpio0 ASPEED_GPIO(E, 3) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(E, 3)>; + }; + + ps0-presence { + label = "ps0-presence"; + gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(H, 3)>; + }; + + ps1-presence { + label = "ps1-presence"; + gpios = <&gpio0 ASPEED_GPIO(E, 5) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(E, 5)>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <1000>; + + fan0-presence { + label = "fan0-presence"; + gpios = <&pca0 4 GPIO_ACTIVE_LOW>; + linux,code = <4>; + }; + + fan1-presence { + label = "fan1-presence"; + gpios = <&pca0 5 GPIO_ACTIVE_LOW>; + linux,code = <5>; + }; + + fan2-presence { + label = "fan2-presence"; + gpios = <&pca0 6 GPIO_ACTIVE_LOW>; + linux,code = <6>; + }; + + fan3-presence { + label = "fan3-presence"; + gpios = <&pca0 7 GPIO_ACTIVE_LOW>; + linux,code = <7>; + }; + }; +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; + spi-max-frequency = <50000000>; +#include "openbmc-flash-layout-128.dtsi" + }; + + flash@1 { + status = "okay"; + m25p,fast-read; + label = "alt-bmc"; + spi-max-frequency = <50000000>; + }; +}; + +&spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; + + flash@0 { + status = "okay"; + m25p,fast-read; + label = "pnor"; + spi-max-frequency = <100000000>; + }; +}; + +&mac2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii3_default>; + clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>, + <&syscon ASPEED_CLK_MAC3RCLK>; + clock-names = "MACCLK", "RCLK"; + use-ncsi; +}; + +&emmc { + status = "okay"; +}; + +&fsim0 { + status = "okay"; + + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom@1000 { + compatible = "ibm,fsi2pib"; + reg = <0x1000 0x400>; + }; + + i2c@1800 { + compatible = "ibm,fsi-i2c-master"; + reg = <0x1800 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + cfam0_i2c0: i2c-bus@0 { + reg = <0>; + }; + + cfam0_i2c1: i2c-bus@1 { + reg = <1>; + }; + + cfam0_i2c2: i2c-bus@2 { + reg = <2>; + }; + + cfam0_i2c3: i2c-bus@3 { + reg = <3>; + }; + + cfam0_i2c4: i2c-bus@4 { + reg = <4>; + }; + + cfam0_i2c5: i2c-bus@5 { + reg = <5>; + }; + + cfam0_i2c6: i2c-bus@6 { + reg = <6>; + }; + + cfam0_i2c7: i2c-bus@7 { + reg = <7>; + }; + + cfam0_i2c8: i2c-bus@8 { + reg = <8>; + }; + + cfam0_i2c9: i2c-bus@9 { + reg = <9>; + }; + + cfam0_i2c10: i2c-bus@a { + reg = <10>; + }; + + cfam0_i2c11: i2c-bus@b { + reg = <11>; + }; + + cfam0_i2c12: i2c-bus@c { + reg = <12>; + }; + + cfam0_i2c13: i2c-bus@d { + reg = <13>; + }; + + cfam0_i2c14: i2c-bus@e { + reg = <14>; + }; + }; + + sbefifo@2400 { + compatible = "ibm,p9-sbefifo"; + reg = <0x2400 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + fsi_occ0: occ { + compatible = "ibm,p9-occ"; + }; + }; + + fsi_hub0: hub@3400 { + compatible = "fsi-master-hub"; + reg = <0x3400 0x400>; + #address-cells = <2>; + #size-cells = <0>; + + no-scan-on-init; + }; + }; +}; + +&fsi_hub0 { + cfam@1,0 { + reg = <1 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <1>; + + scom@1000 { + compatible = "ibm,fsi2pib"; + reg = <0x1000 0x400>; + }; + + i2c@1800 { + compatible = "ibm,fsi-i2c-master"; + reg = <0x1800 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + cfam1_i2c0: i2c-bus@0 { + reg = <0>; + }; + + cfam1_i2c1: i2c-bus@1 { + reg = <1>; + }; + + cfam1_i2c2: i2c-bus@2 { + reg = <2>; + }; + + cfam1_i2c3: i2c-bus@3 { + reg = <3>; + }; + + cfam1_i2c4: i2c-bus@4 { + reg = <4>; + }; + + cfam1_i2c5: i2c-bus@5 { + reg = <5>; + }; + + cfam1_i2c6: i2c-bus@6 { + reg = <6>; + }; + + cfam1_i2c7: i2c-bus@7 { + reg = <7>; + }; + + cfam1_i2c8: i2c-bus@8 { + reg = <8>; + }; + + cfam1_i2c9: i2c-bus@9 { + reg = <9>; + }; + + cfam1_i2c10: i2c-bus@a { + reg = <10>; + }; + + cfam1_i2c11: i2c-bus@b { + reg = <11>; + }; + + cfam1_i2c12: i2c-bus@c { + reg = <12>; + }; + + cfam1_i2c13: i2c-bus@d { + reg = <13>; + }; + + cfam1_i2c14: i2c-bus@e { + reg = <14>; + }; + }; + + sbefifo@2400 { + compatible = "ibm,p9-sbefifo"; + reg = <0x2400 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + fsi_occ1: occ { + compatible = "ibm,p9-occ"; + }; + }; + + fsi_hub1: hub@3400 { + compatible = "fsi-master-hub"; + reg = <0x3400 0x400>; + #address-cells = <2>; + #size-cells = <0>; + + no-scan-on-init; + }; + }; +}; + +/* Legacy OCC numbering (to get rid of when userspace is fixed) */ +&fsi_occ0 { + reg = <1>; +}; + +&fsi_occ1 { + reg = <2>; +}; + +/ { + aliases { + i2c100 = &cfam0_i2c0; + i2c101 = &cfam0_i2c1; + i2c102 = &cfam0_i2c2; + i2c103 = &cfam0_i2c3; + i2c104 = &cfam0_i2c4; + i2c105 = &cfam0_i2c5; + i2c106 = &cfam0_i2c6; + i2c107 = &cfam0_i2c7; + i2c108 = &cfam0_i2c8; + i2c109 = &cfam0_i2c9; + i2c110 = &cfam0_i2c10; + i2c111 = &cfam0_i2c11; + i2c112 = &cfam0_i2c12; + i2c113 = &cfam0_i2c13; + i2c114 = &cfam0_i2c14; + i2c200 = &cfam1_i2c0; + i2c201 = &cfam1_i2c1; + i2c202 = &cfam1_i2c2; + i2c203 = &cfam1_i2c3; + i2c204 = &cfam1_i2c4; + i2c205 = &cfam1_i2c5; + i2c206 = &cfam1_i2c6; + i2c207 = &cfam1_i2c7; + i2c208 = &cfam1_i2c8; + i2c209 = &cfam1_i2c9; + i2c210 = &cfam1_i2c10; + i2c211 = &cfam1_i2c11; + i2c212 = &cfam1_i2c12; + i2c213 = &cfam1_i2c13; + i2c214 = &cfam1_i2c14; + }; + +}; + +&i2c0 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; + + bmp: bmp280@77 { + compatible = "bosch,bmp280"; + reg = <0x77>; + #io-channel-cells = <1>; + }; + + max31785@52 { + compatible = "maxim,max31785a"; + reg = <0x52>; + #address-cells = <1>; + #size-cells = <0>; + + fan@0 { + compatible = "pmbus-fan"; + reg = <0>; + tach-pulses = <2>; + maxim,fan-rotor-input = "tach"; + maxim,fan-pwm-freq = <25000>; + maxim,fan-dual-tach; + maxim,fan-no-watchdog; + maxim,fan-no-fault-ramp; + maxim,fan-ramp = <2>; + maxim,fan-fault-pin-mon; + }; + + fan@1 { + compatible = "pmbus-fan"; + reg = <1>; + tach-pulses = <2>; + maxim,fan-rotor-input = "tach"; + maxim,fan-pwm-freq = <25000>; + maxim,fan-dual-tach; + maxim,fan-no-watchdog; + maxim,fan-no-fault-ramp; + maxim,fan-ramp = <2>; + maxim,fan-fault-pin-mon; + }; + + fan@2 { + compatible = "pmbus-fan"; + reg = <2>; + tach-pulses = <2>; + maxim,fan-rotor-input = "tach"; + maxim,fan-pwm-freq = <25000>; + maxim,fan-dual-tach; + maxim,fan-no-watchdog; + maxim,fan-no-fault-ramp; + maxim,fan-ramp = <2>; + maxim,fan-fault-pin-mon; + }; + + fan@3 { + compatible = "pmbus-fan"; + reg = <3>; + tach-pulses = <2>; + maxim,fan-rotor-input = "tach"; + maxim,fan-pwm-freq = <25000>; + maxim,fan-dual-tach; + maxim,fan-no-watchdog; + maxim,fan-no-fault-ramp; + maxim,fan-ramp = <2>; + maxim,fan-fault-pin-mon; + }; + }; + + dps: dps310@76 { + compatible = "infineon,dps310"; + reg = <0x76>; + #io-channel-cells = <0>; + }; + + pca0: pca9552@60 { + compatible = "nxp,pca9552"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + gpio@0 { + reg = <0>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@1 { + reg = <1>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@2 { + reg = <2>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@3 { + reg = <3>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@4 { + reg = <4>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@5 { + reg = <5>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@6 { + reg = <6>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@7 { + reg = <7>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@8 { + reg = <8>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@9 { + reg = <9>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@10 { + reg = <10>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@11 { + reg = <11>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@12 { + reg = <12>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@13 { + reg = <13>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@14 { + reg = <14>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@15 { + reg = <15>; + type = <PCA955X_TYPE_GPIO>; + }; + }; + + power-supply@68 { + compatible = "ibm,cffps1"; + reg = <0x68>; + }; + + power-supply@69 { + compatible = "ibm,cffps1"; + reg = <0x69>; + }; +}; + +&i2c4 { + status = "okay"; + + tmp423a@4c { + compatible = "ti,tmp423"; + reg = <0x4c>; + }; + + ir35221@70 { + compatible = "infineon,ir35221"; + reg = <0x70>; + }; + + ir35221@71 { + compatible = "infineon,ir35221"; + reg = <0x71>; + }; +}; + +&i2c5 { + status = "okay"; + + tmp423a@4c { + compatible = "ti,tmp423"; + reg = <0x4c>; + }; + + ir35221@70 { + compatible = "infineon,ir35221"; + reg = <0x70>; + }; + + ir35221@71 { + compatible = "infineon,ir35221"; + reg = <0x71>; + }; +}; + +&i2c7 { + status = "okay"; +}; + +&i2c9 { + status = "okay"; + + tmp275@4a { + compatible = "ti,tmp275"; + reg = <0x4a>; + }; +}; + +&i2c10 { + status = "okay"; +}; + +&i2c11 { + status = "okay"; + + pca9552: pca9552@60 { + compatible = "nxp,pca9552"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = "PS_SMBUS_RESET_N", "APSS_RESET_N", + "GPU0_TH_OVERT_N_BUFF", "GPU1_TH_OVERT_N_BUFF", + "GPU2_TH_OVERT_N_BUFF", "GPU3_TH_OVERT_N_BUFF", + "GPU4_TH_OVERT_N_BUFF", "GPU5_TH_OVERT_N_BUFF", + "GPU0_PWR_GOOD_BUFF", "GPU1_PWR_GOOD_BUFF", + "GPU2_PWR_GOOD_BUFF", "GPU3_PWR_GOOD_BUFF", + "GPU4_PWR_GOOD_BUFF", "GPU5_PWR_GOOD_BUFF", + "12V_BREAKER_FLT_N", "THROTTLE_UNLATCHED_N"; + + gpio@0 { + reg = <0>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@1 { + reg = <1>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@2 { + reg = <2>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@3 { + reg = <3>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@4 { + reg = <4>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@5 { + reg = <5>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@6 { + reg = <6>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@7 { + reg = <7>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@8 { + reg = <8>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@9 { + reg = <9>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@10 { + reg = <10>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@11 { + reg = <11>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@12 { + reg = <12>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@13 { + reg = <13>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@14 { + reg = <14>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@15 { + reg = <15>; + type = <PCA955X_TYPE_GPIO>; + }; + }; + + rtc@32 { + compatible = "epson,rx8900"; + reg = <0x32>; + }; + + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; + + ucd90160@64 { + compatible = "ti,ucd90160"; + reg = <0x64>; + }; +}; + +&i2c12 { + status = "okay"; +}; + +&i2c13 { + status = "okay"; +}; + +&ibt { + status = "okay"; +}; + +&uart1 { + status = "okay"; + // Workaround for A0 + compatible = "snps,dw-apb-uart"; +}; + +&uart5 { + // Workaround for A0 + compatible = "snps,dw-apb-uart"; +}; + +&vuart1 { + status = "okay"; +}; + +&lpc_ctrl { + status = "okay"; + memory-region = <&flash_memory>; + flash = <&spi1>; +}; + +&wdt1 { + aspeed,reset-type = "none"; + aspeed,external-signal; + aspeed,ext-push-pull; + aspeed,ext-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdtrst1_default>; +}; + +&wdt2 { + status = "okay"; +}; + +&pinctrl { + /* Hog these as no driver is probed for the entire LPC block */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpc_default>, + <&pinctrl_lsirq_default>; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dts b/arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dts index 0b9e29c3212e..01074b6e3e03 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dts @@ -14,7 +14,7 @@ bootargs = "console=ttyS4,115200 earlyprintk"; }; - memory { + memory@40000000 { reg = <0x40000000 0x20000000>; }; @@ -43,6 +43,10 @@ gpios = <&gpio ASPEED_GPIO(N, 1) GPIO_ACTIVE_LOW>; }; + power_green { + gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>; + }; + id_blue { gpios = <&gpio ASPEED_GPIO(O, 0) GPIO_ACTIVE_LOW>; }; @@ -81,6 +85,12 @@ label = "bmc"; #include "openbmc-flash-layout.dtsi" }; + + flash@1 { + status = "okay"; + m25p,fast-read; + label = "alt"; + }; }; &spi { @@ -97,10 +107,7 @@ &mac0 { status = "okay"; - use-ncsi; - no-hw-checksum; - pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rmii1_default>; }; @@ -222,3 +229,20 @@ &vuart { status = "okay"; }; + +&wdt2 { + aspeed,alt-boot; +}; + +&sdmmc { + status = "okay"; +}; + +&sdhci1 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sd2_default>; + cd-inverted; + disable-wp; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts b/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts index 31ea34e14c79..421aa600148b 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts @@ -77,8 +77,6 @@ gpio-keys-polled { compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; poll-interval = <1000>; fan0-presence { @@ -200,6 +198,7 @@ status = "okay"; label = "bmc"; m25p,fast-read; + spi-max-frequency = <50000000>; partitions { #address-cells = < 1 >; @@ -224,6 +223,7 @@ status = "okay"; label = "alt-bmc"; m25p,fast-read; + spi-max-frequency = <50000000>; partitions { #address-cells = < 1 >; @@ -242,7 +242,6 @@ label = "alt-obmc-ubi"; }; }; - }; }; @@ -255,6 +254,7 @@ status = "okay"; label = "pnor"; m25p,fast-read; + spi-max-frequency = <100000000>; }; }; @@ -293,6 +293,9 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rmii1_default>; + clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>, + <&syscon ASPEED_CLK_MAC1RCLK>; + clock-names = "MACCLK", "RCLK"; use-ncsi; }; diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts b/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts index 30624378316d..bc60ec291681 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts @@ -130,6 +130,7 @@ status = "okay"; label = "bmc"; m25p,fast-read; + spi-max-frequency = <50000000>; #include "openbmc-flash-layout.dtsi" }; }; @@ -143,6 +144,7 @@ status = "okay"; label = "pnor"; m25p,fast-read; + spi-max-frequency = <100000000>; }; }; @@ -187,6 +189,9 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rmii1_default>; + clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>, + <&syscon ASPEED_CLK_MAC1RCLK>; + clock-names = "MACCLK", "RCLK"; use-ncsi; }; diff --git a/arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dts b/arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dts index 33d704541de6..4a1ca8f5b6a7 100644 --- a/arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dts +++ b/arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dts @@ -80,12 +80,18 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rmii1_default &pinctrl_mdio1_default>; + clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>, + <&syscon ASPEED_CLK_MAC1RCLK>; + clock-names = "MACCLK", "RCLK"; }; &mac1 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rmii2_default>; + clocks = <&syscon ASPEED_CLK_GATE_MAC2CLK>, + <&syscon ASPEED_CLK_MAC2RCLK>; + clock-names = "MACCLK", "RCLK"; use-ncsi; }; diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi index dd4b0b15afcf..807a0fc20670 100644 --- a/arch/arm/boot/dts/aspeed-g4.dtsi +++ b/arch/arm/boot/dts/aspeed-g4.dtsi @@ -65,6 +65,27 @@ flash@0 { reg = < 0 >; compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; + status = "disabled"; + }; + flash@1 { + reg = < 1 >; + compatible = "jedec,spi-nor"; + status = "disabled"; + }; + flash@2 { + reg = < 2 >; + compatible = "jedec,spi-nor"; + status = "disabled"; + }; + flash@3 { + reg = < 3 >; + compatible = "jedec,spi-nor"; + status = "disabled"; + }; + flash@4 { + reg = < 4 >; + compatible = "jedec,spi-nor"; status = "disabled"; }; }; @@ -80,6 +101,7 @@ flash@0 { reg = < 0 >; compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; status = "disabled"; }; }; @@ -157,18 +179,21 @@ compatible = "aspeed,ast2400-scu", "syscon", "simple-mfd"; reg = <0x1e6e2000 0x1a8>; #address-cells = <1>; - #size-cells = <0>; + #size-cells = <1>; + ranges = <0 0x1e6e2000 0x1000>; #clock-cells = <1>; #reset-cells = <1>; - pinctrl: pinctrl { - compatible = "aspeed,g4-pinctrl"; - }; - - p2a: p2a-control { + p2a: p2a-control@2c { + reg = <0x2c 0x4>; compatible = "aspeed,ast2400-p2a-ctrl"; status = "disabled"; }; + + pinctrl: pinctrl@80 { + reg = <0x80 0x18>, <0xa0 0x10>; + compatible = "aspeed,ast2400-pinctrl"; + }; }; rng: hwrng@1e6e2078 { @@ -192,6 +217,34 @@ reg = <0x1e720000 0x8000>; // 32K }; + sdmmc: sd-controller@1e740000 { + compatible = "aspeed,ast2400-sd-controller"; + reg = <0x1e740000 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x1e740000 0x10000>; + clocks = <&syscon ASPEED_CLK_GATE_SDCLK>; + status = "disabled"; + + sdhci0: sdhci@100 { + compatible = "aspeed,ast2400-sdhci"; + reg = <0x100 0x100>; + interrupts = <26>; + sdhci,auto-cmd12; + clocks = <&syscon ASPEED_CLK_SDIO>; + status = "disabled"; + }; + + sdhci1: sdhci@200 { + compatible = "aspeed,ast2400-sdhci"; + reg = <0x200 0x100>; + interrupts = <26>; + sdhci,auto-cmd12; + clocks = <&syscon ASPEED_CLK_SDIO>; + status = "disabled"; + }; + }; + gpio: gpio@1e780000 { #gpio-cells = <2>; gpio-controller; @@ -296,14 +349,14 @@ lpc_ctrl: lpc-ctrl@0 { compatible = "aspeed,ast2400-lpc-ctrl"; - reg = <0x0 0x80>; + reg = <0x0 0x10>; clocks = <&syscon ASPEED_CLK_GATE_LCLK>; status = "disabled"; }; - lpc_snoop: lpc-snoop@0 { + lpc_snoop: lpc-snoop@10 { compatible = "aspeed,ast2400-lpc-snoop"; - reg = <0x0 0x80>; + reg = <0x10 0x8>; interrupts = <8>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi index 5b1ca265c2ce..ebec0fa8baa7 100644 --- a/arch/arm/boot/dts/aspeed-g5.dtsi +++ b/arch/arm/boot/dts/aspeed-g5.dtsi @@ -47,13 +47,6 @@ reg = <0x80000000 0>; }; - edac: sdram@1e6e0000 { - compatible = "aspeed,ast2500-sdram-edac"; - reg = <0x1e6e0000 0x174>; - interrupts = <0>; - status = "disabled"; - }; - ahb { compatible = "simple-bus"; #address-cells = <1>; @@ -72,16 +65,19 @@ flash@0 { reg = < 0 >; compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; status = "disabled"; }; flash@1 { reg = < 1 >; compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; status = "disabled"; }; flash@2 { reg = < 2 >; compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; status = "disabled"; }; }; @@ -97,11 +93,13 @@ flash@0 { reg = < 0 >; compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; status = "disabled"; }; flash@1 { reg = < 1 >; compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; status = "disabled"; }; }; @@ -117,11 +115,13 @@ flash@0 { reg = < 0 >; compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; status = "disabled"; }; flash@1 { reg = < 1 >; compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; status = "disabled"; }; }; @@ -206,24 +206,33 @@ #size-cells = <1>; ranges; + edac: memory-controller@1e6e0000 { + compatible = "aspeed,ast2500-sdram-edac"; + reg = <0x1e6e0000 0x174>; + interrupts = <0>; + status = "disabled"; + }; + syscon: syscon@1e6e2000 { compatible = "aspeed,ast2500-scu", "syscon", "simple-mfd"; reg = <0x1e6e2000 0x1a8>; #address-cells = <1>; - #size-cells = <0>; + #size-cells = <1>; + ranges = <0 0x1e6e2000 0x1000>; #clock-cells = <1>; #reset-cells = <1>; - pinctrl: pinctrl { - compatible = "aspeed,g5-pinctrl"; - aspeed,external-nodes = <&gfx &lhc>; - - }; - - p2a: p2a-control { + p2a: p2a-control@2c { compatible = "aspeed,ast2500-p2a-ctrl"; + reg = <0x2c 0x4>; status = "disabled"; }; + + pinctrl: pinctrl@80 { + compatible = "aspeed,ast2500-pinctrl"; + reg = <0x80 0x18>, <0xa0 0x10>; + aspeed,external-nodes = <&gfx>, <&lhc>; + }; }; rng: hwrng@1e6e2078 { @@ -267,18 +276,61 @@ reg = <0x1e720000 0x9000>; // 36K }; + sdmmc: sd-controller@1e740000 { + compatible = "aspeed,ast2500-sd-controller"; + reg = <0x1e740000 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x1e740000 0x10000>; + clocks = <&syscon ASPEED_CLK_GATE_SDCLK>; + status = "disabled"; + + sdhci0: sdhci@100 { + compatible = "aspeed,ast2500-sdhci"; + reg = <0x100 0x100>; + interrupts = <26>; + sdhci,auto-cmd12; + clocks = <&syscon ASPEED_CLK_SDIO>; + status = "disabled"; + }; + + sdhci1: sdhci@200 { + compatible = "aspeed,ast2500-sdhci"; + reg = <0x200 0x100>; + interrupts = <26>; + sdhci,auto-cmd12; + clocks = <&syscon ASPEED_CLK_SDIO>; + status = "disabled"; + }; + }; + gpio: gpio@1e780000 { #gpio-cells = <2>; gpio-controller; compatible = "aspeed,ast2500-gpio"; - reg = <0x1e780000 0x1000>; + reg = <0x1e780000 0x200>; interrupts = <20>; - gpio-ranges = <&pinctrl 0 0 220>; + gpio-ranges = <&pinctrl 0 0 232>; clocks = <&syscon ASPEED_CLK_APB>; interrupt-controller; #interrupt-cells = <2>; }; + sgpio: sgpio@1e780200 { + #gpio-cells = <2>; + compatible = "aspeed,ast2500-sgpio"; + gpio-controller; + interrupts = <40>; + reg = <0x1e780200 0x0100>; + clocks = <&syscon ASPEED_CLK_APB>; + interrupt-controller; + ngpios = <8>; + bus-frequency = <12000000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sgpm_default>; + status = "disabled"; + }; + rtc: rtc@1e781000 { compatible = "aspeed,ast2500-rtc"; reg = <0x1e781000 0x18>; @@ -351,6 +403,7 @@ interrupts = <8>; clocks = <&syscon ASPEED_CLK_APB>; no-loopback-test; + aspeed,sirq-polarity-sense = <&syscon 0x70 25>; status = "disabled"; }; @@ -409,29 +462,30 @@ lpc_ctrl: lpc-ctrl@0 { compatible = "aspeed,ast2500-lpc-ctrl"; - reg = <0x0 0x80>; + reg = <0x0 0x10>; clocks = <&syscon ASPEED_CLK_GATE_LCLK>; status = "disabled"; }; - lpc_snoop: lpc-snoop@0 { + lpc_snoop: lpc-snoop@10 { compatible = "aspeed,ast2500-lpc-snoop"; - reg = <0x0 0x80>; + reg = <0x10 0x8>; interrupts = <8>; status = "disabled"; }; - lhc: lhc@20 { - compatible = "aspeed,ast2500-lhc"; - reg = <0x20 0x24 0x48 0x8>; - }; - lpc_reset: reset-controller@18 { compatible = "aspeed,ast2500-lpc-reset"; reg = <0x18 0x4>; #reset-cells = <1>; }; + lhc: lhc@20 { + compatible = "aspeed,ast2500-lhc"; + reg = <0x20 0x24 0x48 0x8>; + }; + + ibt: ibt@c0 { compatible = "aspeed,ast2500-ibt-bmc"; reg = <0xc0 0x18>; @@ -1346,6 +1400,11 @@ groups = "SDA2"; }; + pinctrl_sgpm_default: sgpm_default { + function = "SGPM"; + groups = "SGPM"; + }; + pinctrl_sgps1_default: sgps1_default { function = "SGPS1"; groups = "SGPS1"; diff --git a/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi b/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi new file mode 100644 index 000000000000..045ce66ca876 --- /dev/null +++ b/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi @@ -0,0 +1,1149 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +// Copyright 2019 IBM Corp. + +&pinctrl { + pinctrl_adc0_default: adc0_default { + function = "ADC0"; + groups = "ADC0"; + }; + + pinctrl_adc1_default: adc1_default { + function = "ADC1"; + groups = "ADC1"; + }; + + pinctrl_adc10_default: adc10_default { + function = "ADC10"; + groups = "ADC10"; + }; + + pinctrl_adc11_default: adc11_default { + function = "ADC11"; + groups = "ADC11"; + }; + + pinctrl_adc12_default: adc12_default { + function = "ADC12"; + groups = "ADC12"; + }; + + pinctrl_adc13_default: adc13_default { + function = "ADC13"; + groups = "ADC13"; + }; + + pinctrl_adc14_default: adc14_default { + function = "ADC14"; + groups = "ADC14"; + }; + + pinctrl_adc15_default: adc15_default { + function = "ADC15"; + groups = "ADC15"; + }; + + pinctrl_adc2_default: adc2_default { + function = "ADC2"; + groups = "ADC2"; + }; + + pinctrl_adc3_default: adc3_default { + function = "ADC3"; + groups = "ADC3"; + }; + + pinctrl_adc4_default: adc4_default { + function = "ADC4"; + groups = "ADC4"; + }; + + pinctrl_adc5_default: adc5_default { + function = "ADC5"; + groups = "ADC5"; + }; + + pinctrl_adc6_default: adc6_default { + function = "ADC6"; + groups = "ADC6"; + }; + + pinctrl_adc7_default: adc7_default { + function = "ADC7"; + groups = "ADC7"; + }; + + pinctrl_adc8_default: adc8_default { + function = "ADC8"; + groups = "ADC8"; + }; + + pinctrl_adc9_default: adc9_default { + function = "ADC9"; + groups = "ADC9"; + }; + + pinctrl_bmcint_default: bmcint_default { + function = "BMCINT"; + groups = "BMCINT"; + }; + + pinctrl_espi_default: espi_default { + function = "ESPI"; + groups = "ESPI"; + }; + + pinctrl_espialt_default: espialt_default { + function = "ESPIALT"; + groups = "ESPIALT"; + }; + + pinctrl_fsi1_default: fsi1_default { + function = "FSI1"; + groups = "FSI1"; + }; + + pinctrl_fsi2_default: fsi2_default { + function = "FSI2"; + groups = "FSI2"; + }; + + pinctrl_fwspiabr_default: fwspiabr_default { + function = "FWSPIABR"; + groups = "FWSPIABR"; + }; + + pinctrl_fwspid_default: fwspid_default { + function = "FWSPID"; + groups = "FWSPID"; + }; + + pinctrl_fwqspid_default: fwqspid_default { + function = "FWQSPID"; + groups = "FWQSPID"; + }; + + pinctrl_fwspiwp_default: fwspiwp_default { + function = "FWSPIWP"; + groups = "FWSPIWP"; + }; + + pinctrl_gpit0_default: gpit0_default { + function = "GPIT0"; + groups = "GPIT0"; + }; + + pinctrl_gpit1_default: gpit1_default { + function = "GPIT1"; + groups = "GPIT1"; + }; + + pinctrl_gpit2_default: gpit2_default { + function = "GPIT2"; + groups = "GPIT2"; + }; + + pinctrl_gpit3_default: gpit3_default { + function = "GPIT3"; + groups = "GPIT3"; + }; + + pinctrl_gpit4_default: gpit4_default { + function = "GPIT4"; + groups = "GPIT4"; + }; + + pinctrl_gpit5_default: gpit5_default { + function = "GPIT5"; + groups = "GPIT5"; + }; + + pinctrl_gpit6_default: gpit6_default { + function = "GPIT6"; + groups = "GPIT6"; + }; + + pinctrl_gpit7_default: gpit7_default { + function = "GPIT7"; + groups = "GPIT7"; + }; + + pinctrl_gpiu0_default: gpiu0_default { + function = "GPIU0"; + groups = "GPIU0"; + }; + + pinctrl_gpiu1_default: gpiu1_default { + function = "GPIU1"; + groups = "GPIU1"; + }; + + pinctrl_gpiu2_default: gpiu2_default { + function = "GPIU2"; + groups = "GPIU2"; + }; + + pinctrl_gpiu3_default: gpiu3_default { + function = "GPIU3"; + groups = "GPIU3"; + }; + + pinctrl_gpiu4_default: gpiu4_default { + function = "GPIU4"; + groups = "GPIU4"; + }; + + pinctrl_gpiu5_default: gpiu5_default { + function = "GPIU5"; + groups = "GPIU5"; + }; + + pinctrl_gpiu6_default: gpiu6_default { + function = "GPIU6"; + groups = "GPIU6"; + }; + + pinctrl_gpiu7_default: gpiu7_default { + function = "GPIU7"; + groups = "GPIU7"; + }; + + pinctrl_hvi3c3_default: hvi3c3_default { + function = "HVI3C3"; + groups = "HVI3C3"; + }; + + pinctrl_hvi3c4_default: hvi3c4_default { + function = "HVI3C4"; + groups = "HVI3C4"; + }; + + pinctrl_i2c1_default: i2c1_default { + function = "I2C1"; + groups = "I2C1"; + }; + + pinctrl_i2c10_default: i2c10_default { + function = "I2C10"; + groups = "I2C10"; + }; + + pinctrl_i2c11_default: i2c11_default { + function = "I2C11"; + groups = "I2C11"; + }; + + pinctrl_i2c12_default: i2c12_default { + function = "I2C12"; + groups = "I2C12"; + }; + + pinctrl_i2c13_default: i2c13_default { + function = "I2C13"; + groups = "I2C13"; + }; + + pinctrl_i2c14_default: i2c14_default { + function = "I2C14"; + groups = "I2C14"; + }; + + pinctrl_i2c15_default: i2c15_default { + function = "I2C15"; + groups = "I2C15"; + }; + + pinctrl_i2c16_default: i2c16_default { + function = "I2C16"; + groups = "I2C16"; + }; + + pinctrl_i2c2_default: i2c2_default { + function = "I2C2"; + groups = "I2C2"; + }; + + pinctrl_i2c3_default: i2c3_default { + function = "I2C3"; + groups = "I2C3"; + }; + + pinctrl_i2c4_default: i2c4_default { + function = "I2C4"; + groups = "I2C4"; + }; + + pinctrl_i2c5_default: i2c5_default { + function = "I2C5"; + groups = "I2C5"; + }; + + pinctrl_i2c6_default: i2c6_default { + function = "I2C6"; + groups = "I2C6"; + }; + + pinctrl_i2c7_default: i2c7_default { + function = "I2C7"; + groups = "I2C7"; + }; + + pinctrl_i2c8_default: i2c8_default { + function = "I2C8"; + groups = "I2C8"; + }; + + pinctrl_i2c9_default: i2c9_default { + function = "I2C9"; + groups = "I2C9"; + }; + + pinctrl_i3c3_default: i3c3_default { + function = "I3C3"; + groups = "I3C3"; + }; + + pinctrl_i3c4_default: i3c4_default { + function = "I3C4"; + groups = "I3C4"; + }; + + pinctrl_i3c5_default: i3c5_default { + function = "I3C5"; + groups = "I3C5"; + }; + + pinctrl_i3c6_default: i3c6_default { + function = "I3C6"; + groups = "I3C6"; + }; + + pinctrl_jtagm_default: jtagm_default { + function = "JTAGM"; + groups = "JTAGM"; + }; + + pinctrl_lhpd_default: lhpd_default { + function = "LHPD"; + groups = "LHPD"; + }; + + pinctrl_lhsirq_default: lhsirq_default { + function = "LHSIRQ"; + groups = "LHSIRQ"; + }; + + pinctrl_lpc_default: lpc_default { + function = "LPC"; + groups = "LPC"; + }; + + pinctrl_lpchc_default: lpchc_default { + function = "LPCHC"; + groups = "LPCHC"; + }; + + pinctrl_lpcpd_default: lpcpd_default { + function = "LPCPD"; + groups = "LPCPD"; + }; + + pinctrl_lpcpme_default: lpcpme_default { + function = "LPCPME"; + groups = "LPCPME"; + }; + + pinctrl_lpcsmi_default: lpcsmi_default { + function = "LPCSMI"; + groups = "LPCSMI"; + }; + + pinctrl_lsirq_default: lsirq_default { + function = "LSIRQ"; + groups = "LSIRQ"; + }; + + pinctrl_maclink1_default: maclink1_default { + function = "MACLINK1"; + groups = "MACLINK1"; + }; + + pinctrl_maclink2_default: maclink2_default { + function = "MACLINK2"; + groups = "MACLINK2"; + }; + + pinctrl_maclink3_default: maclink3_default { + function = "MACLINK3"; + groups = "MACLINK3"; + }; + + pinctrl_maclink4_default: maclink4_default { + function = "MACLINK4"; + groups = "MACLINK4"; + }; + + pinctrl_mdio1_default: mdio1_default { + function = "MDIO1"; + groups = "MDIO1"; + }; + + pinctrl_mdio2_default: mdio2_default { + function = "MDIO2"; + groups = "MDIO2"; + }; + + pinctrl_mdio3_default: mdio3_default { + function = "MDIO3"; + groups = "MDIO3"; + }; + + pinctrl_mdio4_default: mdio4_default { + function = "MDIO4"; + groups = "MDIO4"; + }; + + pinctrl_ncts1_default: ncts1_default { + function = "NCTS1"; + groups = "NCTS1"; + }; + + pinctrl_ncts2_default: ncts2_default { + function = "NCTS2"; + groups = "NCTS2"; + }; + + pinctrl_ncts3_default: ncts3_default { + function = "NCTS3"; + groups = "NCTS3"; + }; + + pinctrl_ncts4_default: ncts4_default { + function = "NCTS4"; + groups = "NCTS4"; + }; + + pinctrl_ndcd1_default: ndcd1_default { + function = "NDCD1"; + groups = "NDCD1"; + }; + + pinctrl_ndcd2_default: ndcd2_default { + function = "NDCD2"; + groups = "NDCD2"; + }; + + pinctrl_ndcd3_default: ndcd3_default { + function = "NDCD3"; + groups = "NDCD3"; + }; + + pinctrl_ndcd4_default: ndcd4_default { + function = "NDCD4"; + groups = "NDCD4"; + }; + + pinctrl_ndsr1_default: ndsr1_default { + function = "NDSR1"; + groups = "NDSR1"; + }; + + pinctrl_ndsr2_default: ndsr2_default { + function = "NDSR2"; + groups = "NDSR2"; + }; + + pinctrl_ndsr3_default: ndsr3_default { + function = "NDSR3"; + groups = "NDSR3"; + }; + + pinctrl_ndsr4_default: ndsr4_default { + function = "NDSR4"; + groups = "NDSR4"; + }; + + pinctrl_ndtr1_default: ndtr1_default { + function = "NDTR1"; + groups = "NDTR1"; + }; + + pinctrl_ndtr2_default: ndtr2_default { + function = "NDTR2"; + groups = "NDTR2"; + }; + + pinctrl_ndtr3_default: ndtr3_default { + function = "NDTR3"; + groups = "NDTR3"; + }; + + pinctrl_ndtr4_default: ndtr4_default { + function = "NDTR4"; + groups = "NDTR4"; + }; + + pinctrl_nri1_default: nri1_default { + function = "NRI1"; + groups = "NRI1"; + }; + + pinctrl_nri2_default: nri2_default { + function = "NRI2"; + groups = "NRI2"; + }; + + pinctrl_nri3_default: nri3_default { + function = "NRI3"; + groups = "NRI3"; + }; + + pinctrl_nri4_default: nri4_default { + function = "NRI4"; + groups = "NRI4"; + }; + + pinctrl_nrts1_default: nrts1_default { + function = "NRTS1"; + groups = "NRTS1"; + }; + + pinctrl_nrts2_default: nrts2_default { + function = "NRTS2"; + groups = "NRTS2"; + }; + + pinctrl_nrts3_default: nrts3_default { + function = "NRTS3"; + groups = "NRTS3"; + }; + + pinctrl_nrts4_default: nrts4_default { + function = "NRTS4"; + groups = "NRTS4"; + }; + + pinctrl_oscclk_default: oscclk_default { + function = "OSCCLK"; + groups = "OSCCLK"; + }; + + pinctrl_pewake_default: pewake_default { + function = "PEWAKE"; + groups = "PEWAKE"; + }; + + pinctrl_pwm0_default: pwm0_default { + function = "PWM0"; + groups = "PWM0"; + }; + + pinctrl_pwm1_default: pwm1_default { + function = "PWM1"; + groups = "PWM1"; + }; + + pinctrl_pwm10g0_default: pwm10g0_default { + function = "PWM10"; + groups = "PWM10G0"; + }; + + pinctrl_pwm10g1_default: pwm10g1_default { + function = "PWM10"; + groups = "PWM10G1"; + }; + + pinctrl_pwm11g0_default: pwm11g0_default { + function = "PWM11"; + groups = "PWM11G0"; + }; + + pinctrl_pwm11g1_default: pwm11g1_default { + function = "PWM11"; + groups = "PWM11G1"; + }; + + pinctrl_pwm12g0_default: pwm12g0_default { + function = "PWM12"; + groups = "PWM12G0"; + }; + + pinctrl_pwm12g1_default: pwm12g1_default { + function = "PWM12"; + groups = "PWM12G1"; + }; + + pinctrl_pwm13g0_default: pwm13g0_default { + function = "PWM13"; + groups = "PWM13G0"; + }; + + pinctrl_pwm13g1_default: pwm13g1_default { + function = "PWM13"; + groups = "PWM13G1"; + }; + + pinctrl_pwm14g0_default: pwm14g0_default { + function = "PWM14"; + groups = "PWM14G0"; + }; + + pinctrl_pwm14g1_default: pwm14g1_default { + function = "PWM14"; + groups = "PWM14G1"; + }; + + pinctrl_pwm15g0_default: pwm15g0_default { + function = "PWM15"; + groups = "PWM15G0"; + }; + + pinctrl_pwm15g1_default: pwm15g1_default { + function = "PWM15"; + groups = "PWM15G1"; + }; + + pinctrl_pwm2_default: pwm2_default { + function = "PWM2"; + groups = "PWM2"; + }; + + pinctrl_pwm3_default: pwm3_default { + function = "PWM3"; + groups = "PWM3"; + }; + + pinctrl_pwm4_default: pwm4_default { + function = "PWM4"; + groups = "PWM4"; + }; + + pinctrl_pwm5_default: pwm5_default { + function = "PWM5"; + groups = "PWM5"; + }; + + pinctrl_pwm6_default: pwm6_default { + function = "PWM6"; + groups = "PWM6"; + }; + + pinctrl_pwm7_default: pwm7_default { + function = "PWM7"; + groups = "PWM7"; + }; + + pinctrl_pwm8g0_default: pwm8g0_default { + function = "PWM8"; + groups = "PWM8G0"; + }; + + pinctrl_pwm8g1_default: pwm8g1_default { + function = "PWM8"; + groups = "PWM8G1"; + }; + + pinctrl_pwm9g0_default: pwm9g0_default { + function = "PWM9"; + groups = "PWM9G0"; + }; + + pinctrl_pwm9g1_default: pwm9g1_default { + function = "PWM9"; + groups = "PWM9G1"; + }; + + pinctrl_qspi1_default: qspi1_default { + function = "QSPI1"; + groups = "QSPI1"; + }; + + pinctrl_qspi2_default: qspi2_default { + function = "QSPI2"; + groups = "QSPI2"; + }; + + pinctrl_rgmii1_default: rgmii1_default { + function = "RGMII1"; + groups = "RGMII1"; + }; + + pinctrl_rgmii2_default: rgmii2_default { + function = "RGMII2"; + groups = "RGMII2"; + }; + + pinctrl_rgmii3_default: rgmii3_default { + function = "RGMII3"; + groups = "RGMII3"; + }; + + pinctrl_rgmii4_default: rgmii4_default { + function = "RGMII4"; + groups = "RGMII4"; + }; + + pinctrl_rmii1_default: rmii1_default { + function = "RMII1"; + groups = "RMII1"; + }; + + pinctrl_rmii2_default: rmii2_default { + function = "RMII2"; + groups = "RMII2"; + }; + + pinctrl_rmii3_default: rmii3_default { + function = "RMII3"; + groups = "RMII3"; + }; + + pinctrl_rmii4_default: rmii4_default { + function = "RMII4"; + groups = "RMII4"; + }; + + pinctrl_rxd1_default: rxd1_default { + function = "RXD1"; + groups = "RXD1"; + }; + + pinctrl_rxd2_default: rxd2_default { + function = "RXD2"; + groups = "RXD2"; + }; + + pinctrl_rxd3_default: rxd3_default { + function = "RXD3"; + groups = "RXD3"; + }; + + pinctrl_rxd4_default: rxd4_default { + function = "RXD4"; + groups = "RXD4"; + }; + + pinctrl_salt1_default: salt1_default { + function = "SALT1"; + groups = "SALT1"; + }; + + pinctrl_salt10g0_default: salt10g0_default { + function = "SALT10"; + groups = "SALT10G0"; + }; + + pinctrl_salt10g1_default: salt10g1_default { + function = "SALT10"; + groups = "SALT10G1"; + }; + + pinctrl_salt11g0_default: salt11g0_default { + function = "SALT11"; + groups = "SALT11G0"; + }; + + pinctrl_salt11g1_default: salt11g1_default { + function = "SALT11"; + groups = "SALT11G1"; + }; + + pinctrl_salt12g0_default: salt12g0_default { + function = "SALT12"; + groups = "SALT12G0"; + }; + + pinctrl_salt12g1_default: salt12g1_default { + function = "SALT12"; + groups = "SALT12G1"; + }; + + pinctrl_salt13g0_default: salt13g0_default { + function = "SALT13"; + groups = "SALT13G0"; + }; + + pinctrl_salt13g1_default: salt13g1_default { + function = "SALT13"; + groups = "SALT13G1"; + }; + + pinctrl_salt14g0_default: salt14g0_default { + function = "SALT14"; + groups = "SALT14G0"; + }; + + pinctrl_salt14g1_default: salt14g1_default { + function = "SALT14"; + groups = "SALT14G1"; + }; + + pinctrl_salt15g0_default: salt15g0_default { + function = "SALT15"; + groups = "SALT15G0"; + }; + + pinctrl_salt15g1_default: salt15g1_default { + function = "SALT15"; + groups = "SALT15G1"; + }; + + pinctrl_salt16g0_default: salt16g0_default { + function = "SALT16"; + groups = "SALT16G0"; + }; + + pinctrl_salt16g1_default: salt16g1_default { + function = "SALT16"; + groups = "SALT16G1"; + }; + + pinctrl_salt2_default: salt2_default { + function = "SALT2"; + groups = "SALT2"; + }; + + pinctrl_salt3_default: salt3_default { + function = "SALT3"; + groups = "SALT3"; + }; + + pinctrl_salt4_default: salt4_default { + function = "SALT4"; + groups = "SALT4"; + }; + + pinctrl_salt5_default: salt5_default { + function = "SALT5"; + groups = "SALT5"; + }; + + pinctrl_salt6_default: salt6_default { + function = "SALT6"; + groups = "SALT6"; + }; + + pinctrl_salt7_default: salt7_default { + function = "SALT7"; + groups = "SALT7"; + }; + + pinctrl_salt8_default: salt8_default { + function = "SALT8"; + groups = "SALT8"; + }; + + pinctrl_salt9g0_default: salt9g0_default { + function = "SALT9"; + groups = "SALT9G0"; + }; + + pinctrl_salt9g1_default: salt9g1_default { + function = "SALT9"; + groups = "SALT9G1"; + }; + + pinctrl_sd1_default: sd1_default { + function = "SD1"; + groups = "SD1"; + }; + + pinctrl_sd2_default: sd2_default { + function = "SD2"; + groups = "SD2"; + }; + + pinctrl_emmc_default: emmc_default { + function = "EMMC"; + groups = "EMMCG4"; + }; + + pinctrl_sgpm1_default: sgpm1_default { + function = "SGPM1"; + groups = "SGPM1"; + }; + + pinctrl_sgps1_default: sgps1_default { + function = "SGPS1"; + groups = "SGPS1"; + }; + + pinctrl_sioonctrl_default: sioonctrl_default { + function = "SIOONCTRL"; + groups = "SIOONCTRL"; + }; + + pinctrl_siopbi_default: siopbi_default { + function = "SIOPBI"; + groups = "SIOPBI"; + }; + + pinctrl_siopbo_default: siopbo_default { + function = "SIOPBO"; + groups = "SIOPBO"; + }; + + pinctrl_siopwreq_default: siopwreq_default { + function = "SIOPWREQ"; + groups = "SIOPWREQ"; + }; + + pinctrl_siopwrgd_default: siopwrgd_default { + function = "SIOPWRGD"; + groups = "SIOPWRGD"; + }; + + pinctrl_sios3_default: sios3_default { + function = "SIOS3"; + groups = "SIOS3"; + }; + + pinctrl_sios5_default: sios5_default { + function = "SIOS5"; + groups = "SIOS5"; + }; + + pinctrl_siosci_default: siosci_default { + function = "SIOSCI"; + groups = "SIOSCI"; + }; + + pinctrl_spi1_default: spi1_default { + function = "SPI1"; + groups = "SPI1"; + }; + + pinctrl_spi1abr_default: spi1abr_default { + function = "SPI1ABR"; + groups = "SPI1ABR"; + }; + + pinctrl_spi1cs1_default: spi1cs1_default { + function = "SPI1CS1"; + groups = "SPI1CS1"; + }; + + pinctrl_spi1wp_default: spi1wp_default { + function = "SPI1WP"; + groups = "SPI1WP"; + }; + + pinctrl_spi2_default: spi2_default { + function = "SPI2"; + groups = "SPI2"; + }; + + pinctrl_spi2cs1_default: spi2cs1_default { + function = "SPI2CS1"; + groups = "SPI2CS1"; + }; + + pinctrl_spi2cs2_default: spi2cs2_default { + function = "SPI2CS2"; + groups = "SPI2CS2"; + }; + + pinctrl_tach0_default: tach0_default { + function = "TACH0"; + groups = "TACH0"; + }; + + pinctrl_tach1_default: tach1_default { + function = "TACH1"; + groups = "TACH1"; + }; + + pinctrl_tach10_default: tach10_default { + function = "TACH10"; + groups = "TACH10"; + }; + + pinctrl_tach11_default: tach11_default { + function = "TACH11"; + groups = "TACH11"; + }; + + pinctrl_tach12_default: tach12_default { + function = "TACH12"; + groups = "TACH12"; + }; + + pinctrl_tach13_default: tach13_default { + function = "TACH13"; + groups = "TACH13"; + }; + + pinctrl_tach14_default: tach14_default { + function = "TACH14"; + groups = "TACH14"; + }; + + pinctrl_tach15_default: tach15_default { + function = "TACH15"; + groups = "TACH15"; + }; + + pinctrl_tach2_default: tach2_default { + function = "TACH2"; + groups = "TACH2"; + }; + + pinctrl_tach3_default: tach3_default { + function = "TACH3"; + groups = "TACH3"; + }; + + pinctrl_tach4_default: tach4_default { + function = "TACH4"; + groups = "TACH4"; + }; + + pinctrl_tach5_default: tach5_default { + function = "TACH5"; + groups = "TACH5"; + }; + + pinctrl_tach6_default: tach6_default { + function = "TACH6"; + groups = "TACH6"; + }; + + pinctrl_tach7_default: tach7_default { + function = "TACH7"; + groups = "TACH7"; + }; + + pinctrl_tach8_default: tach8_default { + function = "TACH8"; + groups = "TACH8"; + }; + + pinctrl_tach9_default: tach9_default { + function = "TACH9"; + groups = "TACH9"; + }; + + pinctrl_thru0_default: thru0_default { + function = "THRU0"; + groups = "THRU0"; + }; + + pinctrl_thru1_default: thru1_default { + function = "THRU1"; + groups = "THRU1"; + }; + + pinctrl_thru2_default: thru2_default { + function = "THRU2"; + groups = "THRU2"; + }; + + pinctrl_thru3_default: thru3_default { + function = "THRU3"; + groups = "THRU3"; + }; + + pinctrl_txd1_default: txd1_default { + function = "TXD1"; + groups = "TXD1"; + }; + + pinctrl_txd2_default: txd2_default { + function = "TXD2"; + groups = "TXD2"; + }; + + pinctrl_txd3_default: txd3_default { + function = "TXD3"; + groups = "TXD3"; + }; + + pinctrl_txd4_default: txd4_default { + function = "TXD4"; + groups = "TXD4"; + }; + + pinctrl_uart10_default: uart10_default { + function = "UART10"; + groups = "UART10"; + }; + + pinctrl_uart11_default: uart11_default { + function = "UART11"; + groups = "UART11"; + }; + + pinctrl_uart12g0_default: uart12g0_default { + function = "UART12"; + groups = "UART12G0"; + }; + + pinctrl_uart12g1_default: uart12g1_default { + function = "UART12"; + groups = "UART12G1"; + }; + + pinctrl_uart13g0_default: uart13g0_default { + function = "UART13"; + groups = "UART13G0"; + }; + + pinctrl_uart13g1_default: uart13g1_default { + function = "UART13"; + groups = "UART13G1"; + }; + + pinctrl_uart6_default: uart6_default { + function = "UART6"; + groups = "UART6"; + }; + + pinctrl_uart7_default: uart7_default { + function = "UART7"; + groups = "UART7"; + }; + + pinctrl_uart8_default: uart8_default { + function = "UART8"; + groups = "UART8"; + }; + + pinctrl_uart9_default: uart9_default { + function = "UART9"; + groups = "UART9"; + }; + + pinctrl_vb_default: vb_default { + function = "VB"; + groups = "VB"; + }; + + pinctrl_vgahs_default: vgahs_default { + function = "VGAHS"; + groups = "VGAHS"; + }; + + pinctrl_vgavs_default: vgavs_default { + function = "VGAVS"; + groups = "VGAVS"; + }; + + pinctrl_wdtrst1_default: wdtrst1_default { + function = "WDTRST1"; + groups = "WDTRST1"; + }; + + pinctrl_wdtrst2_default: wdtrst2_default { + function = "WDTRST2"; + groups = "WDTRST2"; + }; + + pinctrl_wdtrst3_default: wdtrst3_default { + function = "WDTRST3"; + groups = "WDTRST3"; + }; + + pinctrl_wdtrst4_default: wdtrst4_default { + function = "WDTRST4"; + groups = "WDTRST4"; + }; +}; diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi new file mode 100644 index 000000000000..796976d275e1 --- /dev/null +++ b/arch/arm/boot/dts/aspeed-g6.dtsi @@ -0,0 +1,843 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +// Copyright 2019 IBM Corp. + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/ast2600-clock.h> + +/ { + model = "Aspeed BMC"; + compatible = "aspeed,ast2600"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&gic>; + + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c6 = &i2c6; + i2c7 = &i2c7; + i2c8 = &i2c8; + i2c9 = &i2c9; + i2c10 = &i2c10; + i2c11 = &i2c11; + i2c12 = &i2c12; + i2c13 = &i2c13; + i2c14 = &i2c14; + i2c15 = &i2c15; + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + serial3 = &uart4; + serial4 = &uart5; + serial5 = &vuart1; + serial6 = &vuart2; + }; + + + cpus { + #address-cells = <1>; + #size-cells = <0>; + enable-method = "aspeed,ast2600-smp"; + + cpu@f00 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0xf00>; + }; + + cpu@f01 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0xf01>; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupt-parent = <&gic>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + clocks = <&syscon ASPEED_CLK_HPLL>; + arm,cpu-registers-not-fw-configured; + }; + + ahb { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + ranges; + + gic: interrupt-controller@40461000 { + compatible = "arm,cortex-a7-gic"; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; + #interrupt-cells = <3>; + interrupt-controller; + interrupt-parent = <&gic>; + reg = <0x40461000 0x1000>, + <0x40462000 0x1000>, + <0x40464000 0x2000>, + <0x40466000 0x2000>; + }; + + fmc: spi@1e620000 { + reg = < 0x1e620000 0xc4 + 0x20000000 0x10000000 >; + #address-cells = <1>; + #size-cells = <0>; + compatible = "aspeed,ast2600-fmc"; + clocks = <&syscon ASPEED_CLK_AHB>; + status = "disabled"; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + flash@0 { + reg = < 0 >; + compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; + status = "disabled"; + }; + flash@1 { + reg = < 1 >; + compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; + status = "disabled"; + }; + flash@2 { + reg = < 2 >; + compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; + status = "disabled"; + }; + }; + + spi1: spi@1e630000 { + reg = < 0x1e630000 0xc4 + 0x30000000 0x10000000 >; + #address-cells = <1>; + #size-cells = <0>; + compatible = "aspeed,ast2600-spi"; + clocks = <&syscon ASPEED_CLK_AHB>; + status = "disabled"; + flash@0 { + reg = < 0 >; + compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; + status = "disabled"; + }; + flash@1 { + reg = < 1 >; + compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; + status = "disabled"; + }; + }; + + spi2: spi@1e631000 { + reg = < 0x1e631000 0xc4 + 0x50000000 0x10000000 >; + #address-cells = <1>; + #size-cells = <0>; + compatible = "aspeed,ast2600-spi"; + clocks = <&syscon ASPEED_CLK_AHB>; + status = "disabled"; + flash@0 { + reg = < 0 >; + compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; + status = "disabled"; + }; + flash@1 { + reg = < 1 >; + compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; + status = "disabled"; + }; + flash@2 { + reg = < 2 >; + compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; + status = "disabled"; + }; + }; + + mdio0: mdio@1e650000 { + compatible = "aspeed,ast2600-mdio"; + reg = <0x1e650000 0x8>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mdio1_default>; + }; + + mdio1: mdio@1e650008 { + compatible = "aspeed,ast2600-mdio"; + reg = <0x1e650008 0x8>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mdio2_default>; + }; + + mdio2: mdio@1e650010 { + compatible = "aspeed,ast2600-mdio"; + reg = <0x1e650010 0x8>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mdio3_default>; + }; + + mdio3: mdio@1e650018 { + compatible = "aspeed,ast2600-mdio"; + reg = <0x1e650018 0x8>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mdio4_default>; + }; + + mac0: ftgmac@1e660000 { + compatible = "aspeed,ast2600-mac", "faraday,ftgmac100"; + reg = <0x1e660000 0x180>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>; + status = "disabled"; + }; + + mac1: ftgmac@1e680000 { + compatible = "aspeed,ast2600-mac", "faraday,ftgmac100"; + reg = <0x1e680000 0x180>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&syscon ASPEED_CLK_GATE_MAC2CLK>; + status = "disabled"; + }; + + mac2: ftgmac@1e670000 { + compatible = "aspeed,ast2600-mac", "faraday,ftgmac100"; + reg = <0x1e670000 0x180>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>; + status = "disabled"; + }; + + mac3: ftgmac@1e690000 { + compatible = "aspeed,ast2600-mac", "faraday,ftgmac100"; + reg = <0x1e690000 0x180>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&syscon ASPEED_CLK_GATE_MAC4CLK>; + status = "disabled"; + }; + + apb { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + syscon: syscon@1e6e2000 { + compatible = "aspeed,ast2600-scu", "syscon", "simple-mfd"; + reg = <0x1e6e2000 0x1000>; + ranges = <0 0x1e6e2000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + #clock-cells = <1>; + #reset-cells = <1>; + + pinctrl: pinctrl { + compatible = "aspeed,ast2600-pinctrl"; + }; + + smp-memram@180 { + compatible = "aspeed,ast2600-smpmem"; + reg = <0x180 0x40>; + }; + }; + + rng: hwrng@1e6e2524 { + compatible = "timeriomem_rng"; + reg = <0x1e6e2524 0x4>; + period = <1>; + quality = <100>; + }; + + gpio0: gpio@1e780000 { + #gpio-cells = <2>; + gpio-controller; + compatible = "aspeed,ast2600-gpio"; + reg = <0x1e780000 0x800>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + gpio-ranges = <&pinctrl 0 0 208>; + ngpios = <208>; + clocks = <&syscon ASPEED_CLK_APB2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio1: gpio@1e780800 { + #gpio-cells = <2>; + gpio-controller; + compatible = "aspeed,ast2600-gpio"; + reg = <0x1e780800 0x800>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + gpio-ranges = <&pinctrl 0 208 36>; + ngpios = <36>; + clocks = <&syscon ASPEED_CLK_APB1>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + rtc: rtc@1e781000 { + compatible = "aspeed,ast2600-rtc"; + reg = <0x1e781000 0x18>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + timer: timer@1e782000 { + compatible = "aspeed,ast2600-timer"; + reg = <0x1e782000 0x90>; + interrupts-extended = <&gic GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&syscon ASPEED_CLK_APB1>; + clock-names = "PCLK"; + }; + + uart1: serial@1e783000 { + compatible = "ns16550a"; + reg = <0x1e783000 0x20>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&syscon ASPEED_CLK_GATE_UART1CLK>; + resets = <&lpc_reset 4>; + no-loopback-test; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd1_default &pinctrl_rxd1_default>; + status = "disabled"; + }; + + uart5: serial@1e784000 { + compatible = "ns16550a"; + reg = <0x1e784000 0x1000>; + reg-shift = <2>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&syscon ASPEED_CLK_GATE_UART5CLK>; + no-loopback-test; + }; + + wdt1: watchdog@1e785000 { + compatible = "aspeed,ast2600-wdt"; + reg = <0x1e785000 0x40>; + }; + + wdt2: watchdog@1e785040 { + compatible = "aspeed,ast2600-wdt"; + reg = <0x1e785040 0x40>; + status = "disabled"; + }; + + wdt3: watchdog@1e785080 { + compatible = "aspeed,ast2600-wdt"; + reg = <0x1e785080 0x40>; + status = "disabled"; + }; + + wdt4: watchdog@1e7850c0 { + compatible = "aspeed,ast2600-wdt"; + reg = <0x1e7850C0 0x40>; + status = "disabled"; + }; + + lpc: lpc@1e789000 { + compatible = "aspeed,ast2600-lpc", "simple-mfd"; + reg = <0x1e789000 0x1000>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x1e789000 0x1000>; + + lpc_bmc: lpc-bmc@0 { + compatible = "aspeed,ast2600-lpc-bmc", "simple-mfd", "syscon"; + reg = <0x0 0x80>; + reg-io-width = <4>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x80>; + + kcs1: kcs1@0 { + compatible = "aspeed,ast2600-kcs-bmc"; + interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + kcs_chan = <1>; + status = "disabled"; + }; + kcs2: kcs2@0 { + compatible = "aspeed,ast2600-kcs-bmc"; + interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; + kcs_chan = <2>; + status = "disabled"; + }; + kcs3: kcs3@0 { + compatible = "aspeed,ast2600-kcs-bmc"; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; + kcs_chan = <3>; + status = "disabled"; + }; + }; + + lpc_host: lpc-host@80 { + compatible = "aspeed,ast2600-lpc-host", "simple-mfd", "syscon"; + reg = <0x80 0x1e0>; + reg-io-width = <4>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x80 0x1e0>; + + kcs4: kcs4@0 { + compatible = "aspeed,ast2600-kcs-bmc"; + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; + kcs_chan = <4>; + status = "disabled"; + }; + + lpc_ctrl: lpc-ctrl@0 { + compatible = "aspeed,ast2600-lpc-ctrl"; + reg = <0x0 0x80>; + clocks = <&syscon ASPEED_CLK_GATE_LCLK>; + status = "disabled"; + }; + + lpc_snoop: lpc-snoop@0 { + compatible = "aspeed,ast2600-lpc-snoop"; + reg = <0x0 0x80>; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + lhc: lhc@20 { + compatible = "aspeed,ast2600-lhc"; + reg = <0x20 0x24 0x48 0x8>; + }; + + lpc_reset: reset-controller@18 { + compatible = "aspeed,ast2600-lpc-reset"; + reg = <0x18 0x4>; + #reset-cells = <1>; + }; + + ibt: ibt@c0 { + compatible = "aspeed,ast2600-ibt-bmc"; + reg = <0xc0 0x18>; + interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; + }; + + sdc: sdc@1e740000 { + compatible = "aspeed,ast2600-sd-controller"; + reg = <0x1e740000 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x1e740000 0x10000>; + clocks = <&syscon ASPEED_CLK_GATE_SDCLK>; + status = "disabled"; + + sdhci0: sdhci@1e740100 { + compatible = "aspeed,ast2600-sdhci", "sdhci"; + reg = <0x100 0x100>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + sdhci,auto-cmd12; + clocks = <&syscon ASPEED_CLK_SDIO>; + status = "disabled"; + }; + + sdhci1: sdhci@1e740200 { + compatible = "aspeed,ast2600-sdhci", "sdhci"; + reg = <0x200 0x100>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + sdhci,auto-cmd12; + clocks = <&syscon ASPEED_CLK_SDIO>; + status = "disabled"; + }; + }; + + emmc_controller: sdc@1e750000 { + compatible = "aspeed,ast2600-sd-controller"; + reg = <0x1e750000 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x1e750000 0x10000>; + clocks = <&syscon ASPEED_CLK_GATE_EMMCCLK>; + status = "disabled"; + + emmc: sdhci@1e750100 { + compatible = "aspeed,ast2600-sdhci"; + reg = <0x100 0x100>; + sdhci,auto-cmd12; + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&syscon ASPEED_CLK_EMMC>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_emmc_default>; + }; + }; + + vuart1: serial@1e787000 { + compatible = "aspeed,ast2500-vuart"; + reg = <0x1e787000 0x40>; + reg-shift = <2>; + interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&syscon ASPEED_CLK_APB1>; + no-loopback-test; + status = "disabled"; + }; + + vuart2: serial@1e788000 { + compatible = "aspeed,ast2500-vuart"; + reg = <0x1e788000 0x40>; + reg-shift = <2>; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&syscon ASPEED_CLK_APB1>; + no-loopback-test; + status = "disabled"; + }; + + uart2: serial@1e78d000 { + compatible = "ns16550a"; + reg = <0x1e78d000 0x20>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&syscon ASPEED_CLK_GATE_UART2CLK>; + resets = <&lpc_reset 5>; + no-loopback-test; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>; + status = "disabled"; + }; + + uart3: serial@1e78e000 { + compatible = "ns16550a"; + reg = <0x1e78e000 0x20>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&syscon ASPEED_CLK_GATE_UART3CLK>; + resets = <&lpc_reset 6>; + no-loopback-test; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd3_default &pinctrl_rxd3_default>; + status = "disabled"; + }; + + uart4: serial@1e78f000 { + compatible = "ns16550a"; + reg = <0x1e78f000 0x20>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&syscon ASPEED_CLK_GATE_UART4CLK>; + resets = <&lpc_reset 7>; + no-loopback-test; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd4_default &pinctrl_rxd4_default>; + status = "disabled"; + }; + + i2c: bus@1e78a000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x1e78a000 0x1000>; + }; + + fsim0: fsi@1e79b000 { + compatible = "aspeed,ast2600-fsi-master", "fsi-master"; + reg = <0x1e79b000 0x94>; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fsi1_default>; + clocks = <&syscon ASPEED_CLK_GATE_FSICLK>; + status = "disabled"; + }; + + fsim1: fsi@1e79b100 { + compatible = "aspeed,ast2600-fsi-master", "fsi-master"; + reg = <0x1e79b100 0x94>; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fsi2_default>; + clocks = <&syscon ASPEED_CLK_GATE_FSICLK>; + status = "disabled"; + }; + }; + }; +}; + +#include "aspeed-g6-pinctrl.dtsi" + +&i2c { + i2c0: i2c-bus@80 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + reg = <0x80 0x80>; + compatible = "aspeed,ast2600-i2c-bus"; + clocks = <&syscon ASPEED_CLK_APB2>; + resets = <&syscon ASPEED_RESET_I2C>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + bus-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1_default>; + status = "disabled"; + }; + + i2c1: i2c-bus@100 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + reg = <0x100 0x80>; + compatible = "aspeed,ast2600-i2c-bus"; + clocks = <&syscon ASPEED_CLK_APB2>; + resets = <&syscon ASPEED_RESET_I2C>; + interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; + bus-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2_default>; + status = "disabled"; + }; + + i2c2: i2c-bus@180 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + reg = <0x180 0x80>; + compatible = "aspeed,ast2600-i2c-bus"; + clocks = <&syscon ASPEED_CLK_APB2>; + resets = <&syscon ASPEED_RESET_I2C>; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; + bus-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3_default>; + status = "disabled"; + }; + + i2c3: i2c-bus@200 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + reg = <0x200 0x80>; + compatible = "aspeed,ast2600-i2c-bus"; + clocks = <&syscon ASPEED_CLK_APB2>; + resets = <&syscon ASPEED_RESET_I2C>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + bus-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4_default>; + status = "disabled"; + }; + + i2c4: i2c-bus@280 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + reg = <0x280 0x80>; + compatible = "aspeed,ast2600-i2c-bus"; + clocks = <&syscon ASPEED_CLK_APB2>; + resets = <&syscon ASPEED_RESET_I2C>; + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; + bus-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c5_default>; + status = "disabled"; + }; + + i2c5: i2c-bus@300 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + reg = <0x300 0x80>; + compatible = "aspeed,ast2600-i2c-bus"; + clocks = <&syscon ASPEED_CLK_APB2>; + resets = <&syscon ASPEED_RESET_I2C>; + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; + bus-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c6_default>; + status = "disabled"; + }; + + i2c6: i2c-bus@380 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + reg = <0x380 0x80>; + compatible = "aspeed,ast2600-i2c-bus"; + clocks = <&syscon ASPEED_CLK_APB2>; + resets = <&syscon ASPEED_RESET_I2C>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + bus-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c7_default>; + status = "disabled"; + }; + + i2c7: i2c-bus@400 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + reg = <0x400 0x80>; + compatible = "aspeed,ast2600-i2c-bus"; + clocks = <&syscon ASPEED_CLK_APB2>; + resets = <&syscon ASPEED_RESET_I2C>; + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; + bus-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c8_default>; + status = "disabled"; + }; + + i2c8: i2c-bus@480 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + reg = <0x480 0x80>; + compatible = "aspeed,ast2600-i2c-bus"; + clocks = <&syscon ASPEED_CLK_APB2>; + resets = <&syscon ASPEED_RESET_I2C>; + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + bus-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c9_default>; + status = "disabled"; + }; + + i2c9: i2c-bus@500 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + reg = <0x500 0x80>; + compatible = "aspeed,ast2600-i2c-bus"; + clocks = <&syscon ASPEED_CLK_APB2>; + resets = <&syscon ASPEED_RESET_I2C>; + interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; + bus-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c10_default>; + status = "disabled"; + }; + + i2c10: i2c-bus@580 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + reg = <0x580 0x80>; + compatible = "aspeed,ast2600-i2c-bus"; + clocks = <&syscon ASPEED_CLK_APB2>; + resets = <&syscon ASPEED_RESET_I2C>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; + bus-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c11_default>; + status = "disabled"; + }; + + i2c11: i2c-bus@600 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + reg = <0x600 0x80>; + compatible = "aspeed,ast2600-i2c-bus"; + clocks = <&syscon ASPEED_CLK_APB2>; + resets = <&syscon ASPEED_RESET_I2C>; + interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; + bus-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c12_default>; + status = "disabled"; + }; + + i2c12: i2c-bus@680 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + reg = <0x680 0x80>; + compatible = "aspeed,ast2600-i2c-bus"; + clocks = <&syscon ASPEED_CLK_APB2>; + resets = <&syscon ASPEED_RESET_I2C>; + interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; + bus-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c13_default>; + status = "disabled"; + }; + + i2c13: i2c-bus@700 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + reg = <0x700 0x80>; + compatible = "aspeed,ast2600-i2c-bus"; + clocks = <&syscon ASPEED_CLK_APB2>; + resets = <&syscon ASPEED_RESET_I2C>; + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; + bus-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c14_default>; + status = "disabled"; + }; + + i2c14: i2c-bus@780 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + reg = <0x780 0x80>; + compatible = "aspeed,ast2600-i2c-bus"; + clocks = <&syscon ASPEED_CLK_APB2>; + resets = <&syscon ASPEED_RESET_I2C>; + interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>; + bus-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c15_default>; + status = "disabled"; + }; + + i2c15: i2c-bus@800 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + reg = <0x800 0x80>; + compatible = "aspeed,ast2600-i2c-bus"; + clocks = <&syscon ASPEED_CLK_APB2>; + resets = <&syscon ASPEED_RESET_I2C>; + interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>; + bus-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c16_default>; + status = "disabled"; + }; +}; diff --git a/arch/arm/boot/dts/ast2500-facebook-netbmc-common.dtsi b/arch/arm/boot/dts/ast2500-facebook-netbmc-common.dtsi new file mode 100644 index 000000000000..7468f102bd76 --- /dev/null +++ b/arch/arm/boot/dts/ast2500-facebook-netbmc-common.dtsi @@ -0,0 +1,95 @@ +// SPDX-License-Identifier: GPL-2.0+ +// Copyright (c) 2019 Facebook Inc. + +#include "aspeed-g5.dtsi" + +/ { + memory@80000000 { + reg = <0x80000000 0x40000000>; + }; +}; + +/* + * Update reset type to "system" (full chip) to fix warm reboot hang issue + * when reset type is set to default ("soc", gated by reset mask registers). + */ +&wdt1 { + status = "okay"; + aspeed,reset-type = "system"; +}; + +&wdt2 { + status = "disabled"; +}; + +&uart1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd1_default + &pinctrl_rxd1_default>; +}; + +&uart3 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd3_default + &pinctrl_rxd3_default>; +}; + +&uart5 { + status = "okay"; +}; + +&fmc { + status = "okay"; + + fmc_flash0: flash@0 { + status = "okay"; + m25p,fast-read; + label = "spi0.0"; + +#include "facebook-bmc-flash-layout.dtsi" + }; + + fmc_flash1: flash@1 { + status = "okay"; + m25p,fast-read; + label = "spi0.1"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + flash1@0 { + reg = <0x0 0x2000000>; + label = "flash1"; + }; + }; + }; +}; + +&mac1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>; +}; + +&rtc { + status = "okay"; +}; + +&vhub { + status = "okay"; +}; + +&sdmmc { + status = "okay"; +}; + +&sdhci1 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sd2_default>; +}; diff --git a/arch/arm/boot/dts/at91-ariag25.dts b/arch/arm/boot/dts/at91-ariag25.dts index 0d695c762e54..dbfefef2869d 100644 --- a/arch/arm/boot/dts/at91-ariag25.dts +++ b/arch/arm/boot/dts/at91-ariag25.dts @@ -14,11 +14,6 @@ "atmel,at91sam9x5", "atmel,at91sam9"; aliases { - serial0 = &dbgu; - serial1 = &usart0; - serial2 = &usart1; - serial3 = &usart2; - serial4 = &usart3; serial5 = &uart0; serial6 = &uart1; }; @@ -42,132 +37,6 @@ }; }; - ahb { - apb { - mmc0: mmc@f0008000 { - /* N.B. Aria has no SD card detect (CD), assumed present */ - - pinctrl-0 = < - &pinctrl_mmc0_slot0_clk_cmd_dat0 - &pinctrl_mmc0_slot0_dat1_3>; - status = "okay"; - slot@0 { - reg = <0>; - bus-width = <4>; - }; - }; - - tcb0: timer@f8008000 { - timer@0 { - compatible = "atmel,tcb-timer"; - reg = <0>; - }; - - timer@1 { - compatible = "atmel,tcb-timer"; - reg = <1>; - }; - }; - - i2c0: i2c@f8010000 { - status = "okay"; - }; - - i2c1: i2c@f8014000 { - status = "okay"; - }; - - /* TWD2+TCLK2 hidden behind ethernet, so no i2c2 */ - - usart0: serial@f801c000 { - pinctrl-0 = <&pinctrl_usart0 - &pinctrl_usart0_rts - &pinctrl_usart0_cts>; - status = "okay"; - }; - - usart1: serial@f8020000 { - pinctrl-0 = <&pinctrl_usart1 - /* &pinctrl_usart1_rts */ - /* &pinctrl_usart1_cts */ - >; - status = "okay"; - }; - - usart2: serial@f8024000 { - /* cannot activate RTS2+CTS2, clash with - * ethernet on PB0 and PB1 */ - pinctrl-0 = <&pinctrl_usart2>; - status = "okay"; - }; - - usart3: serial@f8028000 { - compatible = "atmel,at91sam9260-usart"; - reg = <0xf8028000 0x200>; - interrupts = <8 4 5>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usart3 - /* &pinctrl_usart3_rts */ - /* &pinctrl_usart3_cts */ - >; - status = "okay"; - }; - - macb0: ethernet@f802c000 { - phy-mode = "rmii"; - /* - * following can be overwritten by bootloader: - * for example u-boot 'ftd set' command - */ - local-mac-address = [00 00 00 00 00 00]; - status = "okay"; - }; - - /* - * UART0/1 pins are marked as GPIO on - * Aria documentation. - * Change to "okay" if you need additional serial ports - */ - uart0: serial@f8040000 { - status = "disabled"; - }; - - uart1: serial@f8044000 { - status = "disabled"; - }; - - adc0: adc@f804c000 { - status = "okay"; - atmel,adc-channels-used = <0xf>; - }; - - dbgu: serial@fffff200 { - status = "okay"; - }; - - pinctrl@fffff400 { - w1_0 { - pinctrl_w1_0: w1_0-0 { - atmel,pins = <0 21 0x0 0x1>; /* PA21 PIO, pull-up */ - }; - }; - }; - - rtc@fffffeb0 { - status = "okay"; - }; - }; - - usb0: ohci@600000 { - status = "okay"; - num-ports = <3>; - }; - - usb1: ehci@700000 { - status = "okay"; - }; - }; - leds { compatible = "gpio-leds"; @@ -187,3 +56,127 @@ pinctrl-0 = <&pinctrl_w1_0>; }; }; + +&adc0 { + status = "okay"; + atmel,adc-channels-used = <0xf>; +}; + +&dbgu { + status = "okay"; +}; + +&i2c0 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; +}; + +/* TWD2+TCLK2 hidden behind ethernet, so no i2c2 */ + +&macb0 { + phy-mode = "rmii"; + /* + * following can be overwritten by bootloader: + * for example u-boot 'ftd set' command + */ + local-mac-address = [00 00 00 00 00 00]; + status = "okay"; +}; + + +&mmc0 { + /* N.B. Aria has no SD card detect (CD), assumed present */ + + pinctrl-0 = < + &pinctrl_mmc0_slot0_clk_cmd_dat0 + &pinctrl_mmc0_slot0_dat1_3>; + status = "okay"; + + slot@0 { + reg = <0>; + bus-width = <4>; + }; +}; + +&pinctrl { + w1_0 { + pinctrl_w1_0: w1_0-0 { + atmel,pins = <0 21 0x0 0x1>; /* PA21 PIO, pull-up */ + }; + }; +}; + +&rtc { + status = "okay"; +}; + +&tcb0 { + timer@0 { + compatible = "atmel,tcb-timer"; + reg = <0>; + }; + + timer@1 { + compatible = "atmel,tcb-timer"; + reg = <1>; + }; +}; + +/* + * UART0/1 pins are marked as GPIO on + * Aria documentation. + * Change to "okay" if you need additional serial ports + */ +&uart0 { + status = "disabled"; +}; + +&uart1 { + status = "disabled"; +}; + +&usart0 { + pinctrl-0 = <&pinctrl_usart0 + &pinctrl_usart0_rts + &pinctrl_usart0_cts>; + status = "okay"; +}; + +&usart1 { + pinctrl-0 = <&pinctrl_usart1 + /* &pinctrl_usart1_rts */ + /* &pinctrl_usart1_cts */ + >; + status = "okay"; +}; + +&usart2 { + /* cannot activate RTS2+CTS2, clash with + * ethernet on PB0 and PB1 */ + pinctrl-0 = <&pinctrl_usart2>; + status = "okay"; +}; + +&usart3 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xf8028000 0x200>; + interrupts = <8 4 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart3 + /* &pinctrl_usart3_rts */ + /* &pinctrl_usart3_cts */ + >; + status = "okay"; +}; + +&usb0 { + status = "okay"; + num-ports = <3>; +}; + +&usb1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/at91-ariettag25.dts b/arch/arm/boot/dts/at91-ariettag25.dts index 7a34c4dc05d2..0267e72c074a 100644 --- a/arch/arm/boot/dts/at91-ariettag25.dts +++ b/arch/arm/boot/dts/at91-ariettag25.dts @@ -6,14 +6,11 @@ */ /dts-v1/; #include "at91sam9g25.dtsi" + / { model = "Acme Systems Arietta G25"; compatible = "acme,ariettag25", "atmel,at91sam9x5", "atmel,at91sam9"; - aliases { - serial0 = &dbgu; - }; - chosen { stdout-path = "serial0:115200n8"; }; @@ -32,57 +29,9 @@ }; }; - ahb { - apb { - mmc0: mmc@f0008000 { - pinctrl-0 = < - &pinctrl_mmc0_slot0_clk_cmd_dat0 - &pinctrl_mmc0_slot0_dat1_3>; - status = "okay"; - - slot@0 { - reg = <0>; - bus-width = <4>; - }; - }; - - tcb0: timer@f8008000 { - timer@0 { - compatible = "atmel,tcb-timer"; - reg = <0>; - }; - - timer@1 { - compatible = "atmel,tcb-timer"; - reg = <1>; - }; - }; - - usb2: gadget@f803c000 { - status = "okay"; - }; - - dbgu: serial@fffff200 { - status = "okay"; - }; - - rtc@fffffeb0 { - status = "okay"; - }; - }; - - usb0: ohci@600000 { - status = "okay"; - num-ports = <3>; - }; - - usb1: ehci@700000 { - status = "okay"; - }; - }; - leds { compatible = "gpio-leds"; + arietta_led { label = "arietta_led"; gpios = <&pioB 8 GPIO_ACTIVE_HIGH>; /* PB8 */ @@ -90,3 +39,48 @@ }; }; }; + +&dbgu { + status = "okay"; +}; + +&mmc0 { + pinctrl-0 = < + &pinctrl_mmc0_slot0_clk_cmd_dat0 + &pinctrl_mmc0_slot0_dat1_3>; + status = "okay"; + + slot@0 { + reg = <0>; + bus-width = <4>; + }; +}; + +&rtc { + status = "okay"; +}; + +&tcb0 { + timer@0 { + compatible = "atmel,tcb-timer"; + reg = <0>; + }; + + timer@1 { + compatible = "atmel,tcb-timer"; + reg = <1>; + }; +}; + +&usb0 { + num-ports = <3>; + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; + +&usb2 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/at91-cosino.dtsi b/arch/arm/boot/dts/at91-cosino.dtsi index 47721c9a2e42..feebd54f670e 100644 --- a/arch/arm/boot/dts/at91-cosino.dtsi +++ b/arch/arm/boot/dts/at91-cosino.dtsi @@ -33,122 +33,119 @@ clock-frequency = <12000000>; }; }; +}; - ahb { - apb { - tcb0: timer@f8008000 { - timer@0 { - compatible = "atmel,tcb-timer"; - reg = <0>; - }; +&adc0 { + atmel,adc-ts-wires = <4>; + atmel,adc-ts-pressure-threshold = <10000>; + status = "okay"; +}; + +&dbgu { + status = "okay"; +}; - timer@1 { - compatible = "atmel,tcb-timer"; - reg = <1>; +&ebi { + pinctrl-0 = <&pinctrl_ebi_addr_nand + &pinctrl_ebi_data_0_7>; + pinctrl-names = "default"; + status = "okay"; + + nand-controller { + pinctrl-0 = <&pinctrl_nand_oe_we + &pinctrl_nand_cs + &pinctrl_nand_rb>; + pinctrl-names = "default"; + status = "okay"; + + nand@3 { + reg = <0x3 0x0 0x800000>; + rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>; + cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>; + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + nand-on-flash-bbt; + label = "atmel_nand"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x40000>; }; - }; - mmc0: mmc@f0008000 { - pinctrl-0 = < - &pinctrl_board_mmc0 - &pinctrl_mmc0_slot0_clk_cmd_dat0 - &pinctrl_mmc0_slot0_dat1_3>; - status = "okay"; - slot@0 { - reg = <0>; - bus-width = <4>; - cd-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>; + uboot@40000 { + label = "u-boot"; + reg = <0x40000 0x80000>; }; - }; - dbgu: serial@fffff200 { - status = "okay"; - }; + ubootenv@c0000 { + label = "U-Boot Env"; + reg = <0xc0000 0x140000>; + }; - usart0: serial@f801c000 { - status = "okay"; - }; + kernel@200000 { + label = "kernel"; + reg = <0x200000 0x600000>; + }; - i2c0: i2c@f8010000 { - status = "okay"; + rootfs@800000 { + label = "rootfs"; + reg = <0x800000 0x0f800000>; + }; }; + }; + }; +}; - adc0: adc@f804c000 { - atmel,adc-ts-wires = <4>; - atmel,adc-ts-pressure-threshold = <10000>; - status = "okay"; - }; +&i2c0 { + status = "okay"; +}; - pinctrl@fffff400 { - mmc0 { - pinctrl_board_mmc0: mmc0-board { - atmel,pins = - <AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD15 gpio CD pin pull up and deglitch */ - }; - }; - }; +&mmc0 { + pinctrl-0 = < + &pinctrl_board_mmc0 + &pinctrl_mmc0_slot0_clk_cmd_dat0 + &pinctrl_mmc0_slot0_dat1_3>; + status = "okay"; + + slot@0 { + reg = <0>; + bus-width = <4>; + cd-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>; + }; +}; - watchdog@fffffe40 { - status = "okay"; - }; +&pinctrl { + mmc0 { + pinctrl_board_mmc0: mmc0-board { + atmel,pins = + <AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD15 gpio CD pin pull up and deglitch */ }; + }; +}; - ebi: ebi@10000000 { - pinctrl-0 = <&pinctrl_ebi_addr_nand - &pinctrl_ebi_data_0_7>; - pinctrl-names = "default"; - status = "okay"; - - nand_controller: nand-controller { - status = "okay"; - pinctrl-0 = <&pinctrl_nand_oe_we - &pinctrl_nand_cs - &pinctrl_nand_rb>; - pinctrl-names = "default"; - - nand@3 { - reg = <0x3 0x0 0x800000>; - rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>; - cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>; - nand-bus-width = <8>; - nand-ecc-mode = "hw"; - nand-ecc-strength = <4>; - nand-ecc-step-size = <512>; - nand-on-flash-bbt; - label = "atmel_nand"; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - at91bootstrap@0 { - label = "at91bootstrap"; - reg = <0x0 0x40000>; - }; - - uboot@40000 { - label = "u-boot"; - reg = <0x40000 0x80000>; - }; - - ubootenv@c0000 { - label = "U-Boot Env"; - reg = <0xc0000 0x140000>; - }; - - kernel@200000 { - label = "kernel"; - reg = <0x200000 0x600000>; - }; - - rootfs@800000 { - label = "rootfs"; - reg = <0x800000 0x0f800000>; - }; - }; - }; - }; - }; +&tcb0 { + timer@0 { + compatible = "atmel,tcb-timer"; + reg = <0>; + }; + + timer@1 { + compatible = "atmel,tcb-timer"; + reg = <1>; }; }; + +&usart0 { + status = "okay"; +}; + +&watchdog { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/at91-cosino_mega2560.dts b/arch/arm/boot/dts/at91-cosino_mega2560.dts index 8fde06adf7cb..73e88d1ba4ed 100644 --- a/arch/arm/boot/dts/at91-cosino_mega2560.dts +++ b/arch/arm/boot/dts/at91-cosino_mega2560.dts @@ -17,61 +17,58 @@ / { model = "HCE Cosino Mega 2560"; compatible = "hce,cosino_mega2560", "atmel,at91sam9x5", "atmel,at91sam9"; +}; + +&adc0 { + atmel,adc-ts-wires = <4>; + atmel,adc-ts-pressure-threshold = <10000>; + status = "okay"; +}; - ahb { - apb { - macb0: ethernet@f802c000 { - phy-mode = "rmii"; - status = "okay"; - }; +&macb0 { + phy-mode = "rmii"; + status = "okay"; +}; - adc0: adc@f804c000 { - atmel,adc-ts-wires = <4>; - atmel,adc-ts-pressure-threshold = <10000>; - status = "okay"; - }; +&mmc1 { + pinctrl-0 = < + &pinctrl_mmc1_slot0_clk_cmd_dat0 + &pinctrl_mmc1_slot0_dat1_3>; + status = "okay"; - rtc@fffffeb0 { - status = "okay"; - }; + slot@0 { + reg = <0>; + bus-width = <4>; + non-removable; + }; +}; - usart1: serial@f8020000 { - status = "okay"; - }; +&rtc { + status = "okay"; +}; - usart2: serial@f8024000 { - status = "okay"; - }; +&usart1 { + status = "okay"; +}; - usb2: gadget@f803c000 { - atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>; - status = "okay"; - }; +&usart2 { + status = "okay"; +}; - mmc1: mmc@f000c000 { - pinctrl-0 = < - &pinctrl_mmc1_slot0_clk_cmd_dat0 - &pinctrl_mmc1_slot0_dat1_3>; - status = "okay"; - slot@0 { - reg = <0>; - bus-width = <4>; - non-removable; - }; - }; - }; +&usb0 { + num-ports = <3>; + atmel,vbus-gpio = <0 /* &pioD 18 GPIO_ACTIVE_LOW */ + &pioD 19 GPIO_ACTIVE_LOW + &pioD 20 GPIO_ACTIVE_LOW + >; + status = "okay"; +}; - usb0: ohci@600000 { - status = "okay"; - num-ports = <3>; - atmel,vbus-gpio = <0 /* &pioD 18 GPIO_ACTIVE_LOW */ - &pioD 19 GPIO_ACTIVE_LOW - &pioD 20 GPIO_ACTIVE_LOW - >; - }; +&usb1 { + status = "okay"; +}; - usb1: ehci@700000 { - status = "okay"; - }; - }; +&usb2 { + atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>; + status = "okay"; }; diff --git a/arch/arm/boot/dts/at91-kizbox.dts b/arch/arm/boot/dts/at91-kizbox.dts index 90996eaf73b2..7d938ccf71b0 100644 --- a/arch/arm/boot/dts/at91-kizbox.dts +++ b/arch/arm/boot/dts/at91-kizbox.dts @@ -28,85 +28,6 @@ }; }; - ahb { - apb { - tcb0: timer@fffa0000 { - timer@0 { - compatible = "atmel,tcb-timer"; - reg = <0>, <1>; - }; - - timer@2 { - compatible = "atmel,tcb-timer"; - reg = <2>; - }; - }; - - macb0: ethernet@fffc4000 { - phy-mode = "mii"; - pinctrl-0 = <&pinctrl_macb_rmii - &pinctrl_macb_rmii_mii_alt>; - status = "okay"; - }; - - usart3: serial@fffd0000 { - status = "okay"; - }; - - dbgu: serial@fffff200 { - status = "okay"; - }; - - watchdog@fffffd40 { - timeout-sec = <15>; - atmel,max-heartbeat-sec = <16>; - atmel,min-heartbeat-sec = <0>; - status = "okay"; - }; - }; - - usb0: ohci@500000 { - num-ports = <1>; - status = "okay"; - }; - - ebi: ebi@10000000 { - status = "okay"; - - nand_controller: nand-controller { - status = "okay"; - pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>; - pinctrl-names = "default"; - - nand@3 { - reg = <0x3 0x0 0x800000>; - rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>; - cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>; - nand-bus-width = <8>; - nand-ecc-mode = "soft"; - nand-on-flash-bbt; - label = "atmel_nand"; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - bootstrap@0 { - label = "bootstrap"; - reg = <0x0 0x20000>; - }; - - ubi@20000 { - label = "ubi"; - reg = <0x20000 0x7fe0000>; - }; - }; - }; - }; - }; - }; - gpio_keys { compatible = "gpio-keys"; #address-cells = <1>; @@ -127,15 +48,6 @@ }; }; - i2c-gpio-0 { - status = "okay"; - - rtc: pcf8563@51 { - compatible = "nxp,pcf8563"; - reg = <0x51>; - }; - }; - pwm_leds { compatible = "pwm-leds"; @@ -179,3 +91,87 @@ &pinctrl_tcb1_tiob0>; }; }; + +&tcb0 { + timer@0 { + compatible = "atmel,tcb-timer"; + reg = <0>, <1>; + }; + + timer@2 { + compatible = "atmel,tcb-timer"; + reg = <2>; + }; +}; + +&ebi { + status = "okay"; +}; + +&nand_controller { + status = "okay"; + pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>; + pinctrl-names = "default"; + + nand@3 { + reg = <0x3 0x0 0x800000>; + rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>; + cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>; + nand-bus-width = <8>; + nand-ecc-mode = "soft"; + nand-on-flash-bbt; + label = "atmel_nand"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + bootstrap@0 { + label = "bootstrap"; + reg = <0x0 0x20000>; + }; + + ubi@20000 { + label = "ubi"; + reg = <0x20000 0x7fe0000>; + }; + }; + }; +}; + +&macb0 { + phy-mode = "mii"; + pinctrl-0 = <&pinctrl_macb_rmii + &pinctrl_macb_rmii_mii_alt>; + status = "okay"; +}; + +&usart3 { + status = "okay"; +}; + +&dbgu { + status = "okay"; +}; + +&watchdog { + timeout-sec = <15>; + atmel,max-heartbeat-sec = <16>; + atmel,min-heartbeat-sec = <0>; + status = "okay"; +}; + +&usb0 { + num-ports = <1>; + status = "okay"; +}; + +&i2c_gpio0 { + status = "okay"; + + rtc: pcf8563@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; +}; diff --git a/arch/arm/boot/dts/at91-kizbox2-2.dts b/arch/arm/boot/dts/at91-kizbox2-2.dts new file mode 100644 index 000000000000..cab8b3579efa --- /dev/null +++ b/arch/arm/boot/dts/at91-kizbox2-2.dts @@ -0,0 +1,26 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * at91-kizbox2-2.dts - Device Tree file for the Kizbox2 with + * two head board + * + * Copyright (C) 2015 Overkiz SAS + * + * Authors: Antoine Aubert <a.aubert@overkiz.com> + * KĂ©vin Raymond <k.raymond@overkiz.com> + */ +/dts-v1/; +#include "at91-kizbox2-common.dtsi" + +/ { + model = "Overkiz Kizbox 2 with two heads"; + compatible = "overkiz,kizbox2-2", "atmel,sama5d31", + "atmel,sama5d3", "atmel,sama5"; +}; + +&usart1 { + status = "okay"; +}; + +&usart2 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/at91-kizbox2-common.dtsi b/arch/arm/boot/dts/at91-kizbox2-common.dtsi new file mode 100644 index 000000000000..af38253a6e7a --- /dev/null +++ b/arch/arm/boot/dts/at91-kizbox2-common.dtsi @@ -0,0 +1,258 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * at91-kizbox2_common.dtsi - Device Tree Include file for + * Overkiz Kizbox 2 family SoC + * + * Copyright (C) 2014-2018 Overkiz SAS + * + * Authors: Antoine Aubert <a.aubert@overkiz.com> + * GaĂ«l Portay <g.portay@overkiz.com> + * KĂ©vin Raymond <k.raymond@overkiz.com> + */ +#include "sama5d31.dtsi" + +/ { + chosen { + bootargs = "ubi.mtd=ubi"; + stdout-path = &dbgu; + }; + + memory { + reg = <0x20000000 0x10000000>; + }; + + clocks { + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <12000000>; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + prog { + label = "PB_PROG"; + gpios = <&pioE 27 GPIO_ACTIVE_LOW>; + linux,code = <0x102>; + wakeup-source; + }; + + reset { + label = "PB_RST"; + gpios = <&pioE 29 GPIO_ACTIVE_LOW>; + linux,code = <0x100>; + wakeup-source; + }; + + user { + label = "PB_USER"; + gpios = <&pioE 31 GPIO_ACTIVE_HIGH>; + linux,code = <0x101>; + wakeup-source; + }; + }; + + pwm_leds { + compatible = "pwm-leds"; + + blue { + label = "pwm:blue:user"; + pwms = <&pwm0 2 10000000 0>; + max-brightness = <255>; + linux,default-trigger = "none"; + }; + + green { + label = "pwm:green:user"; + pwms = <&pwm0 1 10000000 0>; + max-brightness = <255>; + linux,default-trigger = "default-on"; + }; + + red { + label = "pwm:red:user"; + pwms = <&pwm0 0 10000000 0>; + max-brightness = <255>; + linux,default-trigger = "default-on"; + }; + }; +}; + +&i2c1 { + status = "okay"; + + pmic: act8865@5b { + compatible = "active-semi,act8865"; + reg = <0x5b>; + status = "okay"; + + regulators { + vcc_1v8_reg: DCDC_REG1 { + regulator-name = "VCC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vcc_1v2_reg: DCDC_REG2 { + regulator-name = "VCC_1V2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + vcc_3v3_reg: DCDC_REG3 { + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vddfuse_reg: LDO_REG1 { + regulator-name = "FUSE_2V5"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + }; + + vddana_reg: LDO_REG2 { + regulator-name = "VDDANA"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vled_reg: LDO_REG3 { + regulator-name = "VLED"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + v3v8_rf_reg: LDO_REG4 { + regulator-name = "V3V8_RF"; + regulator-min-microvolt = <3800000>; + regulator-max-microvolt = <3800000>; + regulator-always-on; + }; + }; + }; +}; + +&usart0 { + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "disabled"; +}; + +&usart1 { + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "disabled"; +}; + +&usart2 { + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "disabled"; +}; + +&pwm0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_pwmh0_1 + &pinctrl_pwm0_pwmh1_1 + &pinctrl_pwm0_pwmh2_0>; + status = "okay"; +}; + +&adc0 { + atmel,adc-vref = <3333>; + status = "okay"; +}; + +&macb1 { + phy-mode = "rmii"; + status = "okay"; +}; + +&dbgu { + status = "okay"; +}; + +&watchdog { + status = "okay"; +}; + +&ebi { + pinctrl-0 = <&pinctrl_ebi_nand_addr>; + pinctrl-names = "default"; + status = "okay"; +}; + +&nand_controller { + status = "okay"; + + nand@3 { + reg = <0x3 0x0 0x2>; + atmel,rb = <0>; + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + nand-on-flash-bbt; + label = "atmel_nand"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + bootstrap@0 { + label = "bootstrap"; + reg = <0x0 0x20000>; + }; + + ubi@20000 { + label = "ubi"; + reg = <0x20000 0x7fe0000>; + }; + }; + }; +}; + +&usb1 { + status = "okay"; +}; + +&usb2 { + status = "okay"; +}; + +/* WMBUS (inverted with IO in the latest schematic) */ +&pinctrl_usart0 { + atmel,pins = + <AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOD 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP + AT91_PIOE 2 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>; +}; + +/* RTS */ +&pinctrl_usart1 { + atmel,pins = + <AT91_PIOB 28 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_PULL_UP + AT91_PIOE 7 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>; +}; + +/* IO (inverted with WMBUS in the latest schematic) */ +&pinctrl_usart2 { + atmel,pins = + <AT91_PIOE 25 AT91_PERIPH_B AT91_PINCTRL_NONE + AT91_PIOE 26 AT91_PERIPH_B AT91_PINCTRL_PULL_UP + AT91_PIOE 8 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>; +}; diff --git a/arch/arm/boot/dts/at91-kizbox2.dts b/arch/arm/boot/dts/at91-kizbox2.dts deleted file mode 100644 index 86d821884bd4..000000000000 --- a/arch/arm/boot/dts/at91-kizbox2.dts +++ /dev/null @@ -1,244 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * at91-kizbox2.dts - Device Tree file for Overkiz Kizbox 2 board - * - * Copyright (C) 2014 GaĂ«l PORTAY <g.portay@overkiz.com> - */ -/dts-v1/; -#include "sama5d31.dtsi" -#include <dt-bindings/pwm/pwm.h> - -/ { - model = "Overkiz Kizbox 2"; - compatible = "overkiz,kizbox2", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5"; - - chosen { - bootargs = "ubi.mtd=ubi"; - stdout-path = &dbgu; - }; - - memory { - reg = <0x20000000 0x10000000>; - }; - - clocks { - slow_xtal { - clock-frequency = <32768>; - }; - - main_xtal { - clock-frequency = <12000000>; - }; - }; - - ahb { - apb { - i2c1: i2c@f0018000 { - status = "okay"; - - pmic: act8865@5b { - compatible = "active-semi,act8865"; - reg = <0x5b>; - status = "okay"; - - regulators { - vcc_1v8_reg: DCDC_REG1 { - regulator-name = "VCC_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - vcc_1v2_reg: DCDC_REG2 { - regulator-name = "VCC_1V2"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - }; - - vcc_3v3_reg: DCDC_REG3 { - regulator-name = "VCC_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vddfuse_reg: LDO_REG1 { - regulator-name = "FUSE_2V5"; - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; - }; - - vddana_reg: LDO_REG2 { - regulator-name = "VDDANA"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vled_reg: LDO_REG3 { - regulator-name = "VLED"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - v3v8_rf_reg: LDO_REG4 { - regulator-name = "V3V8_RF"; - regulator-min-microvolt = <3800000>; - regulator-max-microvolt = <3800000>; - regulator-always-on; - }; - }; - }; - }; - - tcb0: timer@f0010000 { - timer@0 { - compatible = "atmel,tcb-timer"; - reg = <0>; - }; - - timer@1 { - compatible = "atmel,tcb-timer"; - reg = <1>; - }; - }; - - usart0: serial@f001c000 { - status = "okay"; - }; - - usart1: serial@f0020000 { - status = "okay"; - }; - - pwm0: pwm@f002c000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm0_pwmh0_1 - &pinctrl_pwm0_pwmh1_1 - &pinctrl_pwm0_pwmh2_0>; - status = "okay"; - }; - - adc0: adc@f8018000 { - atmel,adc-vref = <3333>; - status = "okay"; - }; - - usart2: serial@f8020000 { - status = "okay"; - }; - - macb1: ethernet@f802c000 { - phy-mode = "rmii"; - status = "okay"; - }; - - dbgu: serial@ffffee00 { - status = "okay"; - }; - - watchdog@fffffe40 { - status = "okay"; - }; - }; - - usb1: ohci@600000 { - status = "okay"; - }; - - usb2: ehci@700000 { - status = "okay"; - }; - - ebi: ebi@10000000 { - pinctrl-0 = <&pinctrl_ebi_nand_addr>; - pinctrl-names = "default"; - status = "okay"; - - nand_controller: nand-controller { - status = "okay"; - - nand@3 { - reg = <0x3 0x0 0x2>; - atmel,rb = <0>; - nand-bus-width = <8>; - nand-ecc-mode = "hw"; - nand-ecc-strength = <4>; - nand-ecc-step-size = <512>; - nand-on-flash-bbt; - label = "atmel_nand"; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - bootstrap@0 { - label = "bootstrap"; - reg = <0x0 0x20000>; - }; - - ubi@20000 { - label = "ubi"; - reg = <0x20000 0x7fe0000>; - }; - }; - }; - }; - }; - }; - - gpio_keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - - prog { - label = "PB_PROG"; - gpios = <&pioE 27 GPIO_ACTIVE_LOW>; - linux,code = <0x102>; - wakeup-source; - }; - - reset { - label = "PB_RST"; - gpios = <&pioE 29 GPIO_ACTIVE_LOW>; - linux,code = <0x100>; - wakeup-source; - }; - - user { - label = "PB_USER"; - gpios = <&pioE 31 GPIO_ACTIVE_HIGH>; - linux,code = <0x101>; - wakeup-source; - }; - }; - - pwm_leds { - compatible = "pwm-leds"; - - blue { - label = "pwm:blue:user"; - pwms = <&pwm0 2 10000000 0>; - max-brightness = <255>; - linux,default-trigger = "default-on"; - }; - - green { - label = "pwm:green:user"; - pwms = <&pwm0 1 10000000 0>; - max-brightness = <255>; - linux,default-trigger = "default-on"; - }; - - red { - label = "pwm:red:user"; - pwms = <&pwm0 0 10000000 0>; - max-brightness = <255>; - linux,default-trigger = "default-on"; - }; - }; -}; diff --git a/arch/arm/boot/dts/at91-kizbox3-hs.dts b/arch/arm/boot/dts/at91-kizbox3-hs.dts new file mode 100644 index 000000000000..8734e7f8939e --- /dev/null +++ b/arch/arm/boot/dts/at91-kizbox3-hs.dts @@ -0,0 +1,309 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * at91-kizbox3-hs.dts - Device Tree file for Overkiz KIZBOX3-HS board + * + * Copyright (C) 2018 Overkiz SAS + * + * Authors: Dorian Rocipon <d.rocipon@overkiz.com> + * Kevin Carli <k.carli@overkiz.com> + * Mickael Gardet <m.gardet@overkiz.com> + */ +/dts-v1/; +#include "at91-kizbox3_common.dtsi" + +/ { + model = "Overkiz KIZBOX3-HS"; + compatible = "overkiz,kizbox3-hs", "atmel,sama5d2", "atmel,sama5"; + + pwm_leds { + status = "okay"; + + red { + status = "okay"; + }; + + green { + status = "okay"; + }; + + blue { + status = "okay"; + }; + + white { + status = "okay"; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_led_red + &pinctrl_led_white>; + status = "okay"; + + red { + label = "pio:red:user"; + gpios = <&pioA PIN_PB1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + white { + label = "pio:white:user"; + gpios = <&pioA PIN_PB8 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + pinctrl-names = "default" , "default", "default", + "default", "default" ; + pinctrl-0 = <&pinctrl_key_gpio_default>; + pinctrl-1 = <&pinctrl_pio_rf &pinctrl_pio_wifi>; + pinctrl-2 = <&pinctrl_pio_io_boot + &pinctrl_pio_io_reset + &pinctrl_pio_io_test_radio>; + pinctrl-3 = <&pinctrl_pio_zbe_test_radio + &pinctrl_pio_zbe_rst>; + pinctrl-4 = <&pinctrl_pio_input>; + + SW1 { + label = "SW1"; + gpios = <&pioA PIN_PA29 GPIO_ACTIVE_LOW>; + linux,code = <0x101>; + wakeup-source; + }; + + SW2 { + label = "SW2"; + gpios = <&pioA PIN_PA18 GPIO_ACTIVE_LOW>; + linux,code = <0x102>; + wakeup-source; + }; + + SW3 { + label = "SW3"; + gpios = <&pioA PIN_PA22 GPIO_ACTIVE_LOW>; + linux,code = <0x103>; + wakeup-source; + }; + + SW7 { + label = "SW7"; + gpios = <&pioA PIN_PA26 GPIO_ACTIVE_LOW>; + linux,code = <0x107>; + wakeup-source; + }; + + SW8 { + label = "SW8"; + gpios = <&pioA PIN_PA24 GPIO_ACTIVE_LOW>; + linux,code = <0x108>; + wakeup-source; + }; + }; + + gpios { + compatible = "gpio"; + status = "okay"; + + rf_on { + label = "rf on"; + gpio = <&pioA PIN_PC19 GPIO_ACTIVE_HIGH>; + output; + init-low; + }; + + wifi_on { + label = "wifi on"; + gpio = <&pioA PIN_PC20 GPIO_ACTIVE_HIGH>; + output; + init-low; + }; + + zbe_test_radio { + label = "zbe test radio"; + gpio = <&pioA PIN_PB21 GPIO_ACTIVE_HIGH>; + output; + init-low; + }; + + zbe_rst { + label = "zbe rst"; + gpio = <&pioA PIN_PB25 GPIO_ACTIVE_HIGH>; + output; + init-low; + }; + + io_reset { + label = "io reset"; + gpio = <&pioA PIN_PB30 GPIO_ACTIVE_HIGH>; + output; + init-low; + }; + + io_test_radio { + label = "io test radio"; + gpio = <&pioA PIN_PC9 GPIO_ACTIVE_HIGH>; + output; + init-low; + }; + + io_boot_0 { + label = "io boot 0"; + gpio = <&pioA PIN_PC11 GPIO_ACTIVE_HIGH>; + output; + init-low; + }; + + io_boot_1 { + label = "io boot 1"; + gpio = <&pioA PIN_PC17 GPIO_ACTIVE_HIGH>; + output; + init-low; + }; + + verbose_bootloader { + label = "verbose bootloader"; + gpio = <&pioA PIN_PB11 GPIO_ACTIVE_HIGH>; + input; + }; + + nail_bed_detection { + label = "nail bed detection"; + gpio = <&pioA PIN_PB12 GPIO_ACTIVE_HIGH>; + input; + }; + + id_usba { + label = "id usba"; + gpio = <&pioA PIN_PC0 GPIO_ACTIVE_LOW>; + input; + }; + }; +}; + +&pioA { + pinctrl_key_gpio_default: key_gpio_default { + pinmux= <PIN_PA22__GPIO>, + <PIN_PA24__GPIO>, + <PIN_PA26__GPIO>, + <PIN_PA29__GPIO>, + <PIN_PA18__GPIO>; + bias-disable; + }; + + pinctrl_gpio { + pinctrl_pio_rf: gpio_rf { + pinmux = <PIN_PC19__GPIO>; + bias-disable; + }; + pinctrl_pio_wifi: gpio_wifi { + pinmux = <PIN_PC20__GPIO>; + bias-disable; + }; + pinctrl_pio_io_boot: gpio_io_boot { + pinmux = + <PIN_PC11__GPIO>, + <PIN_PC17__GPIO>; + bias-disable; + }; + pinctrl_pio_io_test_radio: gpio_io_test_radio { + pinmux = <PIN_PC9__GPIO>; + bias-disable; + }; + pinctrl_pio_zbe_test_radio: gpio_zbe_test_radio { + pinmux = <PIN_PB21__GPIO>; + bias-disable; + }; + pinctrl_pio_zbe_rst: gpio_zbe_rst { + pinmux = <PIN_PB25__GPIO>; + bias-disable; + }; + /* stm32 reset must be open drain (internal pull up) */ + pinctrl_pio_io_reset: gpio_io_reset { + pinmux = <PIN_PB30__GPIO>; + bias-disable; + drive-open-drain = <1>; + output-low; + }; + pinctrl_pio_input: gpio_input { + pinmux = + <PIN_PB11__GPIO>, + <PIN_PB12__GPIO>, + <PIN_PC0__GPIO>; + bias-disable; + }; + }; + + pinctrl_leds { + pinctrl_led_red: led_red { + pinmux = <PIN_PB1__GPIO>; + bias-disable; + }; + pinctrl_led_white: led_white { + pinmux = <PIN_PB8__GPIO>; + bias-disable; + }; + }; +}; + +&adc { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&uart4 { + status = "okay"; +}; + +&flx0 { + status = "okay"; + + uart5: serial@200 { + status = "okay"; + }; +}; + +&flx3 { + status = "okay"; + uart6: serial@200 { + status = "okay"; + }; +}; + +&flx4 { + status = "okay"; + + i2c2: i2c@600 { + status = "okay"; + }; +}; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; + +&usb2 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/at91-kizbox3_common.dtsi b/arch/arm/boot/dts/at91-kizbox3_common.dtsi new file mode 100644 index 000000000000..299e74d23184 --- /dev/null +++ b/arch/arm/boot/dts/at91-kizbox3_common.dtsi @@ -0,0 +1,412 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * at91-kizbox3.dts - Device Tree Include file for Overkiz Kizbox 3 + * family SoC boards + * + * Copyright (C) 2018 Overkiz SAS + * + * Authors: Dorian Rocipon <d.rocipon@overkiz.com> + * Kevin Carli <k.carli@overkiz.com> + * Mickael Gardet <m.gardet@overkiz.com> + */ +/dts-v1/; +#include "sama5d2.dtsi" +#include "sama5d2-pinfunc.h" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/mfd/atmel-flexcom.h> +#include <dt-bindings/pinctrl/at91.h> +#include <dt-bindings/pwm/pwm.h> + +/ { + model = "Overkiz Kizbox3"; + compatible = "overkiz,kizbox3", "atmel,sama5d2", "atmel,sama5"; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + serial4 = &uart4; + serial5 = &uart5; + serial6 = &uart6; + }; + + chosen { + bootargs = "ubi.mtd=ubi"; + stdout-path = "serial1:115200n8"; + }; + + clocks { + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <12000000>; + }; + }; + + vdd_adc_vddana: supply_3v3_ana { + compatible = "regulator-fixed"; + regulator-name = "adc-vddana"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd_adc_vref: supply_3v3_ref { + compatible = "regulator-fixed"; + regulator-name = "adc-vref"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + pwm_leds { + compatible = "pwm-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_pwm_h0 + &pinctrl_pwm0_pwm_h1 + &pinctrl_pwm0_pwm_h2 + &pinctrl_pwm0_pwm_h3>; + status = "disabled"; + + red { + label = "pwm:red:user"; + pwms = <&pwm0 0 10000000 0>; + max-brightness = <255>; + linux,default-trigger = "default-on"; + status = "disabled"; + }; + + green { + label = "pwm:green:user"; + pwms = <&pwm0 1 10000000 0>; + max-brightness = <255>; + linux,default-trigger = "default-on"; + status = "disabled"; + }; + + blue { + label = "pwm:blue:user"; + pwms = <&pwm0 2 10000000 0>; + max-brightness = <255>; + status = "disabled"; + }; + + white { + label = "pwm:white:user"; + pwms = <&pwm0 3 10000000 0>; + max-brightness = <255>; + status = "disabled"; + }; + }; +}; + +&ebi { + status = "okay"; +}; + +&nand_controller { + status = "okay"; + + nand@3 { + pinctrl-0 = <&pinctrl_ebi_nand_addr>; + pinctrl-names = "default"; + reg = <0x3 0x0 0x800000>; + + atmel,rb = <0>; + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + nand-on-flash-bbt; + label = "atmel_nand"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + bootstrap@0 { + label = "bootstrap"; + reg = <0x0 0x20000>; + }; + + u-boot@20000 { + label = "u-boot"; + reg = <0x20000 0x140000>; + }; + + u-boot-factory@160000 { + label = "u-boot-factory"; + reg = <0x160000 0x140000>; + }; + + ubi@2A0000 { + label = "ubi"; + reg = <0x2A0000 0x7D60000>; + }; + }; + + }; +}; + +&rtc { + status = "okay"; +}; + +&pioA { + pinctrl_ebi_nand_addr: ebi-addr-1 { + pinmux = <PIN_PA0__D0>, + <PIN_PA1__D1>, + <PIN_PA2__D2>, + <PIN_PA3__D3>, + <PIN_PA4__D4>, + <PIN_PA5__D5>, + <PIN_PA6__D6>, + <PIN_PA7__D7>, + <PIN_PA8__NWE_NANDWE>, + <PIN_PA9__NCS3>, + <PIN_PA10__A21_NANDALE>, + <PIN_PA11__A22_NANDCLE>, + <PIN_PA21__NANDRDY>; + bias-disable; + }; + + pinctrl_usart { + pinctrl_usart_0: usart0-0 { + pinmux = < PIN_PB26__URXD0>, <PIN_PB27__UTXD0>; + bias-disable; + }; + pinctrl_usart_1: usart1-0 { + pinmux = < PIN_PD2__URXD1>, <PIN_PD3__UTXD1>; + bias-disable; + }; + pinctrl_usart_2: usart2-0 { + pinmux = < PIN_PD4__URXD2>, <PIN_PD5__UTXD2>; + bias-disable; + }; + pinctrl_usart_3: usart3-0 { + pinmux = < PIN_PC12__URXD3>, <PIN_PC13__UTXD3>; + bias-disable; + }; + pinctrl_usart_4: usart4-0 { + pinmux = < PIN_PB3__URXD4>, <PIN_PB4__UTXD4>; + bias-disable; + }; + pinctrl_flx0_default: flx0_usart_default { + pinmux = <PIN_PB28__FLEXCOM0_IO0>, //TX + <PIN_PB29__FLEXCOM0_IO1>; //RX + bias-disable; + }; + pinctrl_flx3_default: flx3_usart_default { + pinmux = <PIN_PB22__FLEXCOM3_IO1>, //RX + <PIN_PB23__FLEXCOM3_IO0>; //TX + bias-disable; + }; + }; + + pinctrl_flx4_default: flx4_i2c2_default { + pinmux = <PIN_PD12__FLEXCOM4_IO0>, //DATA + <PIN_PD13__FLEXCOM4_IO1>; //CLK + bias-disable; + drive-open-drain = <1>; + }; + + pinctrl_pwm0 { + pinctrl_pwm0_pwm_h0: pwm0_pwm_h0 { + pinmux = <PIN_PA30__PWMH0>; + bias-disable; + }; + pinctrl_pwm0_pwm_h1: pwm0_pwmh1 { + pinmux = <PIN_PB0__PWMH1>; + bias-disable; + }; + pinctrl_pwm0_pwm_h2: pwm0_pwm_h2 { + pinmux = <PIN_PB5__PWMH2>; + bias-disable; + }; + pinctrl_pwm0_pwm_h3: pwm0_pwm_h3 { + pinmux = <PIN_PB7__PWMH3>; + bias-disable; + }; + }; + + pinctrl_adc { + pinctrl_adc2: adc2 { + pinmux = <PIN_PD21__GPIO>; + bias-disable; + }; + pinctrl_adc3: adc3 { + pinmux = <PIN_PD22__GPIO>; + bias-disable; + }; + pinctrl_adc4: adc4 { + pinmux = <PIN_PD23__GPIO>; + bias-disable; + }; + pinctrl_adc5: adc5 { + pinmux = <PIN_PD24__GPIO>; + bias-disable; + }; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart_0>; + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "disabled"; +}; + +/* debug uart */ +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart_1>; + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "disabled"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart_2>; + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "disabled"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart_3>; + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "disabled"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart_4>; + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "disabled"; +}; + +&flx0 { + atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>; + status = "disabled"; + + uart5: serial@200 { + compatible = "atmel,at91sam9260-usart"; + reg = <0x200 0x400>; + interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(11))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(12))>; + dma-names = "tx", "rx"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 19>; + clock-names = "usart"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flx0_default>; + atmel,fifo-size = <32>; + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "disabled"; + }; +}; + +&flx3 { + atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>; + status = "disabled"; + + uart6: serial@200 { + compatible = "atmel,at91sam9260-usart"; + reg = <0x200 0x400>; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(17))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(18))>; + dma-names = "tx", "rx"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 22>; + clock-names = "usart"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flx3_default>; + atmel,fifo-size = <32>; + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "disabled"; + }; +}; + +&flx4 { + atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>; + status = "disabled"; + + i2c2: i2c@600 { + compatible = "atmel,sama5d2-i2c"; + reg = <0x600 0x200>; + interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(19))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(20))>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 23>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flx4_default>; + atmel,fifo-size = <16>; + status = "disabled"; + }; +}; + +&pwm0 { + status = "okay"; +}; + +&shutdown_controller { + atmel,shdwc-debouncer = <976>; + atmel,wakeup-rtc-timer; + + input@0 { + reg = <0>; + atmel,wakeup-type = "low"; + }; +}; + +&watchdog { + status = "okay"; +}; + +&adc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc2 + &pinctrl_adc3 + &pinctrl_adc4 + &pinctrl_adc5>; + + vddana-supply = <&vdd_adc_vddana>; + vref-supply = <&vdd_adc_vref>; + status = "disabled"; +}; + +&securam { + export; + + /* export overkiz u-boot mode/version and factory */ + uboot@1400 { + reg = <0x1400 0x20>; + export; + }; +}; diff --git a/arch/arm/boot/dts/at91-kizboxmini-base.dts b/arch/arm/boot/dts/at91-kizboxmini-base.dts new file mode 100644 index 000000000000..81c29ca5cc1b --- /dev/null +++ b/arch/arm/boot/dts/at91-kizboxmini-base.dts @@ -0,0 +1,24 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * at91-kizboxmini-base.dts - Device Tree file for Overkiz Kizbox mini + * base board + * + * Copyright (C) 2015 Overkiz SAS + * Author: Antoine Aubert <a.aubert@overkiz.com> + * KĂ©vin Raymond <k.raymond@overkiz.com> + */ +/dts-v1/; +#include "at91-kizboxmini-common.dtsi" + +/ { + model = "Overkiz Kizbox Mini"; + compatible = "overkiz,kizboxmini-base", "atmel,at91sam9g25", + "atmel,at91sam9x5", "atmel,at91sam9"; +}; + +&pinctrl_usart0 { + atmel,pins = + <AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP + AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOA 2 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>; +}; diff --git a/arch/arm/boot/dts/at91-kizboxmini-common.dtsi b/arch/arm/boot/dts/at91-kizboxmini-common.dtsi new file mode 100644 index 000000000000..fddf267b2d17 --- /dev/null +++ b/arch/arm/boot/dts/at91-kizboxmini-common.dtsi @@ -0,0 +1,170 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * at91-kizboxmini.dts - Device Tree file for Overkiz Kizbox mini board + * + * Copyright (C) 2014-2018 Overkiz SAS + * Author: Antoine Aubert <a.aubert@overkiz.com> + * GaĂ«l Portay <g.portay@overkiz.com> + * KĂ©vin Raymond <k.raymond@overkiz.com> + * Dorian Rocipon <d.rocipon@overkiz.com> + */ +#include "at91sam9g25.dtsi" + +/ { + chosen { + bootargs = "ubi.mtd=ubi"; + stdout-path = &dbgu; + }; + + memory { + reg = <0x20000000 0x8000000>; + }; + + clocks { + main_xtal { + clock-frequency = <12000000>; + }; + + slow_xtal { + clock-frequency = <32768>; + }; + + adc_op_clk { + status = "disabled"; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + prog { + label = "PB_PROG"; + gpios = <&pioC 17 GPIO_ACTIVE_LOW>; + linux,code = <0x102>; + wakeup-source; + }; + + reset { + label = "PB_RST"; + gpios = <&pioC 16 GPIO_ACTIVE_LOW>; + linux,code = <0x100>; + wakeup-source; + }; + }; + + leds: pwm_leds { + compatible = "pwm-leds"; + + led_blue: pwm_blue { + label = "pwm:blue:user"; + pwms = <&pwm0 2 10000000 0>; + max-brightness = <255>; + linux,default-trigger = "none"; + status = "disabled"; + }; + + led_green: pwm_green { + label = "pwm:green:user"; + pwms = <&pwm0 0 10000000 0>; + max-brightness = <255>; + linux,default-trigger = "default-on"; + }; + + led_red: pwm_red { + label = "pwm:red:user"; + pwms = <&pwm0 1 10000000 0>; + max-brightness = <255>; + linux,default-trigger = "default-on"; + }; + }; +}; + +&usart0 { + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "okay"; +}; + +&macb0 { + phy-mode = "rmii"; + status = "okay"; +}; + +&pwm0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_pwm0_1 + &pinctrl_pwm0_pwm1_1 + &pinctrl_pwm0_pwm2_1>; + status = "okay"; +}; + +&dbgu { + status = "okay"; +}; + +&watchdog { + status = "okay"; +}; + +&adc0 { + status = "disabled"; +}; + +&rtc { + status = "disabled"; +}; + +&ebi { + pinctrl-0 = <&pinctrl_ebi_addr_nand + &pinctrl_ebi_data_0_7>; + pinctrl-names = "default"; + status = "okay"; +}; + +&nand_controller { + status = "okay"; + pinctrl-0 = <&pinctrl_nand_oe_we + &pinctrl_nand_cs + &pinctrl_nand_rb>; + pinctrl-names = "default"; + + nand@3 { + reg = <0x3 0x0 0x800000>; + rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>; + cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>; + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + nand-on-flash-bbt; + label = "atmel_nand"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + bootstrap@0 { + label = "bootstrap"; + reg = <0x0 0x20000>; + }; + + ubi@20000 { + label = "ubi"; + reg = <0x20000 0x7fe0000>; + }; + }; + }; +}; + +&usb0 { + num-ports = <1>; + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; + diff --git a/arch/arm/boot/dts/at91-kizboxmini-mb.dts b/arch/arm/boot/dts/at91-kizboxmini-mb.dts new file mode 100644 index 000000000000..c07d3076a9bc --- /dev/null +++ b/arch/arm/boot/dts/at91-kizboxmini-mb.dts @@ -0,0 +1,26 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2015-2018 Overkiz SAS + * Author: Mickael Gardet <m.gardet@overkiz.com> + * KĂ©vin Raymond <k.raymond@overkiz.com> + */ +/dts-v1/; +#include "at91-kizboxmini-common.dtsi" + +/ { + model = "Overkiz Kizbox Mini Mother Board"; + compatible = "overkiz,kizboxmini-mb", "atmel,at91sam9g25", + "atmel,at91sam9x5", "atmel,at91sam9"; +}; + +&usb0 { + num-ports = <2>; +}; + +&rtc { + status = "okay"; +}; + +&led_blue { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/at91-kizboxmini-rd.dts b/arch/arm/boot/dts/at91-kizboxmini-rd.dts new file mode 100644 index 000000000000..ab50f4d22387 --- /dev/null +++ b/arch/arm/boot/dts/at91-kizboxmini-rd.dts @@ -0,0 +1,49 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2015-2018 Overkiz SAS + * Author: Mickael Gardet <m.gardet@overkiz.com> + * KĂ©vin Raymond <k.raymond@overkiz.com> + */ +/dts-v1/; +#include "at91-kizboxmini-common.dtsi" + +/ { + model = "Overkiz Kizbox Mini RailDIN"; + compatible = "overkiz,kizboxmini-rd", "atmel,at91sam9g25", + "atmel,at91sam9x5", "atmel,at91sam9"; + + clocks { + adc_op_clk { + status = "okay"; + }; + }; +}; + +&pinctrl { + adc0 { + pinctrl_adc0_ad5: adc0_ad5-0 { + /* pull-up disable */ + atmel,pins = <AT91_PIOB 16 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; + }; +}; + +&usart0 { + status = "disabled"; +}; + +&rtc { + status = "okay"; +}; + +&led_blue { + status = "okay"; +}; + +&adc0 { + atmel,adc-vref = <2500>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc0_ad5>; + atmel,adc-channels-used = <0x0020>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/at91-kizboxmini.dts b/arch/arm/boot/dts/at91-kizboxmini.dts deleted file mode 100644 index 0620dcdf4dfb..000000000000 --- a/arch/arm/boot/dts/at91-kizboxmini.dts +++ /dev/null @@ -1,174 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * at91-kizboxmini.dts - Device Tree file for Overkiz Kizbox mini board - * - * Copyright (C) 2014 GaĂ«l PORTAY <g.portay@overkiz.com> - */ -/dts-v1/; -#include "at91sam9g25.dtsi" -#include <dt-bindings/pwm/pwm.h> - -/ { - model = "Overkiz Kizbox mini"; - compatible = "overkiz,kizboxmini", "atmel,at91sam9g25", "atmel,at91sam9x5", "atmel,at91sam9"; - - chosen { - bootargs = "ubi.mtd=ubi"; - stdout-path = &dbgu; - }; - - memory { - reg = <0x20000000 0x8000000>; - }; - - clocks { - slow_xtal { - clock-frequency = <32768>; - }; - - main_xtal { - clock-frequency = <12000000>; - }; - }; - - ahb { - apb { - tcb0: timer@f8008000 { - timer@0 { - compatible = "atmel,tcb-timer"; - reg = <0>; - }; - - timer@1 { - compatible = "atmel,tcb-timer"; - reg = <1>; - }; - }; - - usart0: serial@f801c000 { - status = "okay"; - }; - - macb0: ethernet@f802c000 { - phy-mode = "rmii"; - status = "okay"; - }; - - pwm0: pwm@f8034000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm0_pwm0_1 - &pinctrl_pwm0_pwm1_1>; - status = "okay"; - }; - - dbgu: serial@fffff200 { - status = "okay"; - }; - - watchdog@fffffe40 { - status = "okay"; - }; - }; - - usb0: ohci@600000 { - num-ports = <1>; - status = "okay"; - }; - - usb1: ehci@700000 { - status = "okay"; - }; - - ebi: ebi@10000000 { - pinctrl-0 = <&pinctrl_ebi_addr_nand - &pinctrl_ebi_data_0_7>; - pinctrl-names = "default"; - status = "okay"; - - nand_controller: nand-controller { - status = "okay"; - pinctrl-0 = <&pinctrl_nand_oe_we - &pinctrl_nand_cs - &pinctrl_nand_rb>; - pinctrl-names = "default"; - - nand@3 { - reg = <0x3 0x0 0x800000>; - rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>; - cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>; - nand-bus-width = <8>; - nand-ecc-mode = "hw"; - nand-ecc-strength = <4>; - nand-ecc-step-size = <512>; - nand-on-flash-bbt; - label = "atmel_nand"; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - bootstrap@0 { - label = "bootstrap"; - reg = <0x0 0x20000>; - }; - - ubi@20000 { - label = "ubi"; - reg = <0x20000 0x7fe0000>; - }; - }; - }; - }; - }; - - nand0: nand@40000000 { - nand-bus-width = <8>; - nand-ecc-mode = "hw"; - atmel,has-pmecc; - atmel,pmecc-cap = <4>; - atmel,pmecc-sector-size = <512>; - nand-on-flash-bbt; - status = "okay"; - - }; - }; - - gpio_keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - - prog { - label = "PB_PROG"; - gpios = <&pioC 17 GPIO_ACTIVE_LOW>; - linux,code = <0x102>; - wakeup-source; - }; - - reset { - label = "PB_RST"; - gpios = <&pioC 16 GPIO_ACTIVE_LOW>; - linux,code = <0x100>; - wakeup-source; - }; - }; - - pwm_leds { - compatible = "pwm-leds"; - - green { - label = "pwm:green:user"; - pwms = <&pwm0 0 10000000 0>; - max-brightness = <255>; - linux,default-trigger = "default-on"; - }; - - red { - label = "pwm:red:user"; - pwms = <&pwm0 1 10000000 0>; - max-brightness = <255>; - linux,default-trigger = "default-on"; - }; - }; -}; diff --git a/arch/arm/boot/dts/at91-nattis-2-natte-2.dts b/arch/arm/boot/dts/at91-nattis-2-natte-2.dts index f245944bd5d7..4f123477e631 100644 --- a/arch/arm/boot/dts/at91-nattis-2-natte-2.dts +++ b/arch/arm/boot/dts/at91-nattis-2-natte-2.dts @@ -8,7 +8,6 @@ */ /dts-v1/; #include "at91-linea.dtsi" -#include "sama5d3_lcd.dtsi" #include "at91-natte.dtsi" / { diff --git a/arch/arm/boot/dts/at91-sam9x60ek.dts b/arch/arm/boot/dts/at91-sam9x60ek.dts new file mode 100644 index 000000000000..9f30132d7d7b --- /dev/null +++ b/arch/arm/boot/dts/at91-sam9x60ek.dts @@ -0,0 +1,647 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * at91-sam9x60ek.dts - Device Tree file for Microchip SAM9X60-EK board + * + * Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries + * + * Author: Sandeep Sheriker M <sandeepsheriker.mallikarjun@microchip.com> + */ +/dts-v1/; +#include "sam9x60.dtsi" + +/ { + model = "Microchip SAM9X60-EK"; + compatible = "microchip,sam9x60ek", "microchip,sam9x60", "atmel,at91sam9"; + + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + serial1 = &uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + clocks { + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <24000000>; + }; + }; + + regulators: regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + vdd_1v8: fixed-regulator-vdd_1v8@0 { + compatible = "regulator-fixed"; + regulator-name = "VDD_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + status = "okay"; + }; + + vdd_1v5: fixed-regulator-vdd_1v5@1 { + compatible = "regulator-fixed"; + regulator-name = "VDD_1V5"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + status = "okay"; + }; + + vdd1_3v3: fixed-regulator-vdd1_3v3@2 { + compatible = "regulator-fixed"; + regulator-name = "VDD1_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + status = "okay"; + }; + + vdd2_3v3: regulator-fixed-vdd2_3v3@3 { + compatible = "regulator-fixed"; + regulator-name = "VDD2_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + status = "okay"; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_key_gpio_default>; + status = "okay"; + + sw1 { + label = "SW1"; + gpios = <&pioD 18 GPIO_ACTIVE_LOW>; + linux,code=<0x104>; + wakeup-source; + }; + }; + + leds { + compatible = "gpio-leds"; + status = "okay"; /* Conflict with pwm0. */ + + red { + label = "red"; + gpios = <&pioB 11 GPIO_ACTIVE_HIGH>; + }; + + green { + label = "green"; + gpios = <&pioB 12 GPIO_ACTIVE_HIGH>; + }; + + blue { + label = "blue"; + gpios = <&pioB 13 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; +}; + +&adc { + vddana-supply = <&vdd1_3v3>; + vref-supply = <&vdd1_3v3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc_default &pinctrl_adtrg_default>; + status = "okay"; +}; + +&can0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can0_rx_tx>; + status = "disabled"; /* Conflict with dbgu. */ +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1_rx_tx>; + status = "okay"; +}; + +&classd { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_classd_default>; + atmel,pwm-type = "diff"; + atmel,non-overlap-time = <10>; + status = "okay"; +}; + +&dbgu { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dbgu>; + status = "okay"; /* Conflict with can0. */ +}; + +&ebi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ebi_addr_nand &pinctrl_ebi_data_0_7>; + status = "okay"; + + nand_controller: nand-controller { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nand_oe_we &pinctrl_nand_cs &pinctrl_nand_rb>; + status = "okay"; + + nand@3 { + reg = <0x3 0x0 0x800000>; + rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>; + cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>; + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + nand-ecc-strength = <8>; + nand-ecc-step-size = <512>; + nand-on-flash-bbt; + label = "atmel_nand"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x40000>; + }; + + uboot@40000 { + label = "u-boot"; + reg = <0x40000 0xc0000>; + }; + + ubootenvred@100000 { + label = "U-Boot Env Redundant"; + reg = <0x100000 0x40000>; + }; + + ubootenv@140000 { + label = "U-Boot Env"; + reg = <0x140000 0x40000>; + }; + + dtb@180000 { + label = "device tree"; + reg = <0x180000 0x80000>; + }; + + kernel@200000 { + label = "kernel"; + reg = <0x200000 0x600000>; + }; + + rootfs@800000 { + label = "rootfs"; + reg = <0x800000 0x1f800000>; + }; + }; + }; + }; +}; + +&flx0 { + atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>; + status = "okay"; + + i2c0: i2c@600 { + compatible = "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flx0_default>; + atmel,fifo-size = <16>; + i2c-analog-filter; + i2c-digital-filter; + i2c-digital-filter-width-ns = <35>; + status = "okay"; + + eeprom@53 { + compatible = "atmel,24c32"; + reg = <0x53>; + pagesize = <16>; + size = <128>; + status = "okay"; + }; + }; +}; + +&flx4 { + atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>; + status = "disabled"; + + spi0: spi@400 { + compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi"; + reg = <0x400 0x200>; + interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 13>; + clock-names = "spi_clk"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flx4_default>; + atmel,fifo-size = <16>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; +}; + +&flx5 { + atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>; + status = "okay"; + + uart1: serial@200 { + compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(10))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(11))>; + dma-names = "tx", "rx"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 14>; + clock-names = "usart"; + pinctrl-0 = <&pinctrl_flx5_default>; + pinctrl-names = "default"; + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "okay"; + }; +}; + +&flx6 { + atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>; + status = "okay"; + + i2c1: i2c@600 { + compatible = "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <9 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 9>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flx6_default>; + atmel,fifo-size = <16>; + i2c-analog-filter; + i2c-digital-filter; + i2c-digital-filter-width-ns = <35>; + status = "okay"; + + gpio_exp: mcp23008@20 { + compatible = "microchip,mcp23008"; + reg = <0x20>; + }; + }; +}; + +&i2s { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2s_default>; + #sound-dai-cells = <0>; + status = "disabled"; /* Conflict with QSPI. */ +}; + +&macb0 { + phy-mode = "rmii"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_macb0_rmii>; + status = "okay"; + + ethernet-phy@0 { + reg = <0x0>; + }; +}; + +&pinctrl { + atmel,mux-mask = < + /* A B C */ + 0xFFFFFE7F 0xC0E0397F 0xEF00019D /* pioA */ + 0x03FFFFFF 0x02FC7E68 0x00780000 /* pioB */ + 0xffffffff 0xF83FFFFF 0xB800F3FC /* pioC */ + 0x003FFFFF 0x003F8000 0x00000000 /* pioD */ + >; + + adc { + pinctrl_adc_default: adc_default { + atmel,pins = <AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_adtrg_default: adtrg_default { + atmel,pins = <AT91_PIOB 18 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; + }; + }; + + dbgu { + pinctrl_dbgu: dbgu-0 { + atmel,pins = <AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP + AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + }; + + i2s { + pinctrl_i2s_default: i2s { + atmel,pins = + <AT91_PIOB 19 AT91_PERIPH_B AT91_PINCTRL_NONE /* I2SCK */ + AT91_PIOB 20 AT91_PERIPH_B AT91_PINCTRL_NONE /* I2SWS */ + AT91_PIOB 21 AT91_PERIPH_B AT91_PINCTRL_NONE /* I2SDIN */ + AT91_PIOB 22 AT91_PERIPH_B AT91_PINCTRL_NONE /* I2SDOUT */ + AT91_PIOB 23 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* I2SMCK */ + }; + }; + + qspi { + pinctrl_qspi: qspi { + atmel,pins = + <AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_SLEWRATE_DIS + AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_SLEWRATE_DIS + AT91_PIOB 21 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_SLEWRATE_DIS) + AT91_PIOB 22 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_SLEWRATE_DIS) + AT91_PIOB 23 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_SLEWRATE_DIS) + AT91_PIOB 24 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_SLEWRATE_DIS)>; + }; + }; + + nand { + pinctrl_nand_oe_we: nand-oe-we-0 { + atmel,pins = + <AT91_PIOD 0 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS) + AT91_PIOD 1 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)>; + }; + + pinctrl_nand_rb: nand-rb-0 { + atmel,pins = + <AT91_PIOD 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; + }; + + pinctrl_nand_cs: nand-cs-0 { + atmel,pins = + <AT91_PIOD 4 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; + }; + }; + + ebi { + pinctrl_ebi_data_0_7: ebi-data-lsb-0 { + atmel,pins = + <AT91_PIOD 6 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS) + AT91_PIOD 7 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS) + AT91_PIOD 8 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS) + AT91_PIOD 9 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS) + AT91_PIOD 10 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS) + AT91_PIOD 11 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS) + AT91_PIOD 12 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS) + AT91_PIOD 13 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)>; + }; + + pinctrl_ebi_data_0_15: ebi-data-msb-0 { + atmel,pins = + <AT91_PIOD 6 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOD 7 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOD 8 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOD 9 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOD 13 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOD 14 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOD 18 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOD 19 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOD 20 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOD 21 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_ebi_addr_nand: ebi-addr-0 { + atmel,pins = + <AT91_PIOD 2 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS) + AT91_PIOD 3 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)>; + }; + }; + + flexcom { + pinctrl_flx0_default: flx0_twi { + atmel,pins = + <AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP + AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; + }; + + pinctrl_flx4_default: flx4_spi { + atmel,pins = + <AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_flx5_default: flx_uart { + atmel,pins = + <AT91_PIOA 7 AT91_PERIPH_C AT91_PINCTRL_NONE + AT91_PIOA 8 AT91_PERIPH_B AT91_PINCTRL_NONE + AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE + AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_flx6_default: flx6_twi { + atmel,pins = + <AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP + AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; + }; + }; + + classd { + pinctrl_classd_default: classd { + atmel,pins = + <AT91_PIOA 24 AT91_PERIPH_C AT91_PINCTRL_PULL_UP + AT91_PIOA 25 AT91_PERIPH_C AT91_PINCTRL_PULL_UP + AT91_PIOA 26 AT91_PERIPH_C AT91_PINCTRL_PULL_UP + AT91_PIOA 27 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>; + }; + }; + + can0 { + pinctrl_can0_rx_tx: can0_rx_tx { + atmel,pins = + <AT91_PIOA 9 AT91_PERIPH_B AT91_PINCTRL_NONE /* CANRX0 */ + AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_NONE /* CANTX0 */ + AT91_PIOD 20 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_DOWN /* Enable CAN0 mux */ + AT91_PIOD 21 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_DOWN>; /* Enable CAN Transceivers */ + }; + }; + + can1 { + pinctrl_can1_rx_tx: can1_rx_tx { + atmel,pins = + <AT91_PIOA 6 AT91_PERIPH_B AT91_PINCTRL_NONE /* CANRX1 RXD1 */ + AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_NONE /* CANTX1 TXD1 */ + AT91_PIOD 19 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_DOWN /* Enable CAN1 mux */ + AT91_PIOD 21 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_DOWN>; /* Enable CAN Transceivers */ + }; + }; + + macb0 { + pinctrl_macb0_rmii: macb0_rmii-0 { + atmel,pins = + <AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB0 periph A */ + AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB1 periph A */ + AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB2 periph A */ + AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB3 periph A */ + AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB4 periph A */ + AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB5 periph A */ + AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB6 periph A */ + AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB7 periph A */ + AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB9 periph A */ + AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB10 periph A */ + }; + }; + + pwm0 { + pinctrl_pwm0_0: pwm0_0 { + atmel,pins = <AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_pwm0_1: pwm0_1 { + atmel,pins = <AT91_PIOB 12 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_pwm0_2: pwm0_2 { + atmel,pins = <AT91_PIOB 13 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_pwm0_3: pwm0_3 { + atmel,pins = <AT91_PIOB 14 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + }; + + sdmmc0 { + pinctrl_sdmmc0_default: sdmmc0 { + atmel,pins = + <AT91_PIOA 17 AT91_PERIPH_A (AT91_PINCTRL_DRIVE_STRENGTH_HI) /* PA17 CK periph A with pullup */ + AT91_PIOA 16 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI) /* PA16 CMD periph A with pullup */ + AT91_PIOA 15 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI) /* PA15 DAT0 periph A */ + AT91_PIOA 18 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI) /* PA18 DAT1 periph A with pullup */ + AT91_PIOA 19 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI) /* PA19 DAT2 periph A with pullup */ + AT91_PIOA 20 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)>; /* PA20 DAT3 periph A with pullup */ + }; + }; + + gpio_keys { + pinctrl_key_gpio_default: pinctrl_key_gpio { + atmel,pins = <AT91_PIOD 18 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; + }; +}; /* pinctrl */ + +&pmc { + atmel,osc-bypass; +}; + +&pwm0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_0 &pinctrl_pwm0_1 &pinctrl_pwm0_2 &pinctrl_pwm0_3>; + status = "disabled"; /* Conflict with leds. */ +}; + +&sdmmc0 { + bus-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdmmc0_default>; + status = "okay"; + cd-gpios = <&pioA 23 GPIO_ACTIVE_LOW>; + disable-wp; +}; + +&qspi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qspi>; + status = "okay"; /* Conflict with i2s. */ + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <80000000>; + m25p,fast-read; + + at91bootstrap@0 { + label = "qspi: at91bootstrap"; + reg = <0x0 0x40000>; + }; + + bootloader@40000 { + label = "qspi: bootloader"; + reg = <0x40000 0xc0000>; + }; + + bootloaderenvred@100000 { + label = "qspi: bootloader env redundant"; + reg = <0x100000 0x40000>; + }; + + bootloaderenv@140000 { + label = "qspi: bootloader env"; + reg = <0x140000 0x40000>; + }; + + dtb@180000 { + label = "qspi: device tree"; + reg = <0x180000 0x80000>; + }; + + kernel@200000 { + label = "qspi: kernel"; + reg = <0x200000 0x600000>; + }; + }; +}; + +&shutdown_controller { + atmel,shdwc-debouncer = <976>; + status = "okay"; + + input@0 { + reg = <0>; + }; +}; + +&tcb0 { + timer0: timer@0 { + compatible = "atmel,tcb-timer"; + reg = <0>; + }; + + timer1: timer@1 { + compatible = "atmel,tcb-timer"; + reg = <1>; + }; +}; + +&usb1 { + num-ports = <3>; + atmel,vbus-gpio = <0 + &pioD 15 GPIO_ACTIVE_HIGH + &pioD 16 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&usb2 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/at91-sama5d27_som1.dtsi b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi index 7788d5db65c2..6281590150c8 100644 --- a/arch/arm/boot/dts/at91-sama5d27_som1.dtsi +++ b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi @@ -24,6 +24,10 @@ }; ahb { + sdmmc0: sdio-host@a0000000 { + microchip,sdcal-inverted; + }; + apb { qspi1: spi@f0024000 { pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts index 89f0c9979b89..b0853bf7901c 100644 --- a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts +++ b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts @@ -53,6 +53,7 @@ sdmmc0: sdio-host@a0000000 { bus-width = <8>; + mmc-ddr-3_3v; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sdmmc0_default>; status = "okay"; @@ -130,6 +131,9 @@ interrupts = <20 IRQ_TYPE_LEVEL_HIGH 7>; dmas = <0>, <0>; dma-names = "tx", "rx"; + i2c-analog-filter; + i2c-digital-filter; + i2c-digital-filter-width-ns = <35>; #address-cells = <1>; #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 20>; @@ -245,6 +249,9 @@ i2c1: i2c@fc028000 { dmas = <0>, <0>; + i2c-analog-filter; + i2c-digital-filter; + i2c-digital-filter-width-ns = <35>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1_default>; status = "okay"; diff --git a/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi b/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi new file mode 100644 index 000000000000..db3e2239eee8 --- /dev/null +++ b/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi @@ -0,0 +1,304 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * at91-sama5d27_wlsom1.dtsi - Device Tree file for SAMA5D27 WLSOM1 + * + * Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries + * + * Author: Nicolas Ferre <nicolas.ferre@microcihp.com> + * Author: Eugen Hristev <eugen.hristev@microcihp.com> + */ +#include "sama5d2.dtsi" +#include "sama5d2-pinfunc.h" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/mfd/atmel-flexcom.h> +#include <dt-bindings/pinctrl/at91.h> + +/ { + model = "Microchip SAMA5D27 WLSOM1"; + compatible = "microchip,sama5d27-wlsom1", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5"; + + clocks { + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <24000000>; + }; + }; +}; + +&flx1 { + atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>; + + uart6: serial@200 { + compatible = "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <20 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(13))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(14))>; + dma-names = "tx", "rx"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 20>; + clock-names = "usart"; + pinctrl-0 = <&pinctrl_flx1_default>; + pinctrl-names = "default"; + }; +}; + +&i2c0 { + pinctrl-0 = <&pinctrl_i2c0_default>; + pinctrl-names = "default"; + status = "okay"; +}; + +&i2c1 { + dmas = <0>, <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1_default>; + status = "okay"; + + mcp16502@5b { + compatible = "microchip,mcp16502"; + reg = <0x5b>; + status = "okay"; + lpm-gpios = <&pioBU 0 GPIO_ACTIVE_LOW>; + + regulators { + vdd_3v3: VDD_IO { + regulator-name = "VDD_IO"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3700000>; + regulator-initial-mode = <2>; + regulator-allowed-modes = <2>, <4>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + regulator-mode = <4>; + }; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-mode = <4>; + }; + }; + + vddio_ddr: VDD_DDR { + regulator-name = "VDD_DDR"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1850000>; + regulator-initial-mode = <2>; + regulator-allowed-modes = <2>, <4>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1200000>; + regulator-changeable-in-suspend; + regulator-mode = <4>; + }; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1200000>; + regulator-changeable-in-suspend; + regulator-mode = <4>; + }; + }; + + vdd_core: VDD_CORE { + regulator-name = "VDD_CORE"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1850000>; + regulator-initial-mode = <2>; + regulator-allowed-modes = <2>, <4>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + regulator-mode = <4>; + }; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-mode = <4>; + }; + }; + + vdd_ddr: VDD_OTHER { + regulator-name = "VDD_OTHER"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <2>; + regulator-allowed-modes = <2>, <4>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + regulator-changeable-in-suspend; + regulator-mode = <4>; + }; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + regulator-changeable-in-suspend; + regulator-mode = <4>; + }; + }; + + LDO1 { + regulator-name = "LDO1"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3700000>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + }; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + LDO2 { + regulator-name = "LDO2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3700000>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + }; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; +}; + +&macb0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_macb0_default>; + phy-mode = "rmii"; + + ethernet-phy@0 { + reg = <0x0>; + interrupt-parent = <&pioA>; + interrupts = <PIN_PB24 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_macb0_phy_irq>; + }; +}; + +&pmc { + atmel,osc-bypass; +}; + +&qspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qspi1_default>; + status = "disabled"; + + qspi1_flash: spi_flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <80000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; + m25p,fast-read; + status = "disabled"; + + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x40000>; + }; + + bootloader@40000 { + label = "bootloader"; + reg = <0x40000 0xc0000>; + }; + + bootloaderenvred@100000 { + label = "bootloader env redundant"; + reg = <0x100000 0x40000>; + }; + + bootloaderenv@140000 { + label = "bootloader env"; + reg = <0x140000 0x40000>; + }; + + dtb@180000 { + label = "device tree"; + reg = <0x180000 0x80000>; + }; + + kernel@200000 { + label = "kernel"; + reg = <0x200000 0x600000>; + }; + }; +}; + +&pioA { + pinctrl_flx1_default: flx1_usart_default { + pinmux = <PIN_PA24__FLEXCOM1_IO0>, + <PIN_PA23__FLEXCOM1_IO1>, + <PIN_PA25__FLEXCOM1_IO3>, + <PIN_PA26__FLEXCOM1_IO4>; + bias-disable; + }; + + pinctrl_i2c0_default: i2c0_default { + pinmux = <PIN_PD21__TWD0>, + <PIN_PD22__TWCK0>; + bias-disable; + }; + + pinctrl_i2c1_default: i2c1_default { + pinmux = <PIN_PD19__TWD1>, + <PIN_PD20__TWCK1>; + bias-disable; + }; + + pinctrl_macb0_default: macb0_default { + pinmux = <PIN_PB14__GTXCK>, + <PIN_PB15__GTXEN>, + <PIN_PB16__GRXDV>, + <PIN_PB17__GRXER>, + <PIN_PB18__GRX0>, + <PIN_PB19__GRX1>, + <PIN_PB20__GTX0>, + <PIN_PB21__GTX1>, + <PIN_PB22__GMDC>, + <PIN_PB23__GMDIO>; + bias-disable; + }; + + pinctrl_macb0_phy_irq: macb0_phy_irq { + pinmux = <PIN_PB24__GPIO>; + bias-disable; + }; + + pinctrl_qspi1_default: qspi1_default { + pinmux = <PIN_PB5__QSPI1_SCK>, + <PIN_PB6__QSPI1_CS>, + <PIN_PB7__QSPI1_IO0>, + <PIN_PB8__QSPI1_IO1>, + <PIN_PB9__QSPI1_IO2>, + <PIN_PB10__QSPI1_IO3>; + bias-pull-up; + }; +}; + diff --git a/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts new file mode 100644 index 000000000000..0b9fa2942dff --- /dev/null +++ b/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts @@ -0,0 +1,270 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * at91-sama5d27_wlsom1_ek.dts - Device Tree file for SAMA5D27 WLSOM1 EK + * + * Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries + * + * Author: Nicolas Ferre <nicolas.ferre@microcihp.com> + */ +/dts-v1/; +#include "at91-sama5d27_wlsom1.dtsi" + +/ { + model = "Microchip SAMA5D27 WLSOM1 EK"; + compatible = "microchip,sama5d27-wlsom1-ek", "microchip,sama5d27-wlsom1", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5"; + + aliases { + serial0 = &uart0; /* DBGU */ + serial1 = &uart6; /* BT */ + serial2 = &uart5; /* mikro BUS 2 */ + serial3 = &uart3; /* mikro BUS 1 */ + i2c1 = &i2c1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio_keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_key_gpio_default>; + status = "okay"; + + sw4 { + label = "USER BUTTON"; + gpios = <&pioA PIN_PB2 GPIO_ACTIVE_LOW>; + linux,code = <0x104>; + wakeup-source; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_led_gpio_default>; + status = "okay"; + + red { + label = "red"; + gpios = <&pioA PIN_PA6 GPIO_ACTIVE_HIGH>; + }; + + green { + label = "green"; + gpios = <&pioA PIN_PA7 GPIO_ACTIVE_HIGH>; + }; + + blue { + label = "blue"; + gpios = <&pioA PIN_PA8 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; +}; + +&adc { + vddana-supply = <&vdd_3v3>; + vref-supply = <&vdd_3v3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc_default>; + status = "okay"; +}; + +&flx0 { + atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>; + status = "okay"; + + uart5: serial@200 { + compatible = "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(11))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(12))>; + dma-names = "tx", "rx"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 19>; + clock-names = "usart"; + pinctrl-0 = <&pinctrl_flx0_default>; + pinctrl-names = "default"; + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "okay"; + }; +}; + +&flx1 { + status = "okay"; + + uart6: serial@200 { + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "okay"; + }; +}; + +&macb0 { + status = "okay"; +}; + +&pioA { + /* + * There is no real pinmux for ADC, if the pin + * is not requested by another peripheral then + * the muxing is done when channel is enabled. + * Requesting pins for ADC is GPIO is + * encouraged to prevent conflicts and to + * disable bias in order to be in the same + * state when the pin is not muxed to the adc. + */ + pinctrl_adc_default: adc_default { + pinmux = <PIN_PD25__GPIO>, + <PIN_PD26__GPIO>; + bias-disable; + }; + + pinctrl_flx0_default: flx0_usart_default { + pinmux = <PIN_PB28__FLEXCOM0_IO0>, + <PIN_PB29__FLEXCOM0_IO1>; + bias-disable; + }; + + pinctrl_key_gpio_default: key_gpio_default { + pinmux = <PIN_PB2__GPIO>; + bias-pull-up; + }; + + pinctrl_led_gpio_default: led_gpio_default { + pinmux = <PIN_PA6__GPIO>, + <PIN_PA7__GPIO>, + <PIN_PA8__GPIO>; + bias-pull-down; + }; + + pinctrl_sdmmc0_default: sdmmc0_default { + cmd_data { + pinmux = <PIN_PA1__SDMMC0_CMD>, + <PIN_PA2__SDMMC0_DAT0>, + <PIN_PA3__SDMMC0_DAT1>, + <PIN_PA4__SDMMC0_DAT2>, + <PIN_PA5__SDMMC0_DAT3>; + bias-disable; + }; + + ck_cd_vddsel { + pinmux = <PIN_PA0__SDMMC0_CK>, + <PIN_PA11__SDMMC0_VDDSEL>, + <PIN_PA12__SDMMC0_WP>, + <PIN_PA13__SDMMC0_CD>; + bias-disable; + }; + }; + + pinctrl_uart0_default: uart0_default { + pinmux = <PIN_PB26__URXD0>, + <PIN_PB27__UTXD0>; + bias-disable; + }; + + pinctrl_uart3_default: uart3_default { + pinmux = <PIN_PB11__URXD3>, + <PIN_PB12__UTXD3>; + bias-disable; + }; + + pinctrl_pwm0_default: pwm0_default { + pinmux = <PIN_PA31__PWML0>, + <PIN_PA30__PWMH0>; + bias-disable; + }; + + pinctrl_usb_default: usb_default { + pinmux = <PIN_PA10__GPIO>; + bias-disable; + }; +}; + +&pwm0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_default>; + status = "okay"; +}; + +&qspi1 { + status = "okay"; + + qspi1_flash: spi_flash@0 { + status = "okay"; + }; +}; + +&sdmmc0 { + bus-width = <4>; + mmc-ddr-3_3v; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdmmc0_default>; + status = "okay"; +}; + +&shutdown_controller { + atmel,shdwc-debouncer = <976>; + atmel,wakeup-rtc-timer; + + input@0 { + reg = <0>; + atmel,wakeup-type = "low"; + }; +}; + +&tcb0 { + timer0: timer@0 { + compatible = "atmel,tcb-timer"; + reg = <0>; + }; + + timer1: timer@1 { + compatible = "atmel,tcb-timer"; + reg = <1>; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0_default>; + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3_default>; + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "okay"; +}; + +&usb1 { + num-ports = <3>; + atmel,vbus-gpio = <0 + &pioA PIN_PA10 GPIO_ACTIVE_HIGH + 0 + >; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_default>; + status = "okay"; +}; + +&usb2 { + phy_type = "hsic"; + status = "okay"; +}; + +&watchdog { + status = "okay"; +}; + diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts index 808e399fd39a..9d0a7fbea725 100644 --- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts @@ -334,6 +334,9 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flx4_default>; atmel,fifo-size = <16>; + i2c-analog-filter; + i2c-digital-filter; + i2c-digital-filter-width-ns = <35>; status = "okay"; }; }; @@ -342,6 +345,9 @@ dmas = <0>, <0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1_default>; + i2c-analog-filter; + i2c-digital-filter; + i2c-digital-filter-width-ns = <35>; status = "okay"; at24@54 { diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/at91-sama5d4_xplained.dts index fdfc37d716e0..924d9491780d 100644 --- a/arch/arm/boot/dts/at91-sama5d4_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts @@ -49,6 +49,7 @@ }; i2c0: i2c@f8014000 { + i2c-digital-filter; status = "okay"; }; diff --git a/arch/arm/boot/dts/at91-smartkiz.dts b/arch/arm/boot/dts/at91-smartkiz.dts new file mode 100644 index 000000000000..106f23ba4a3b --- /dev/null +++ b/arch/arm/boot/dts/at91-smartkiz.dts @@ -0,0 +1,109 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2017-2018 Overkiz SAS + * Author: Mickael Gardet <m.gardet@overkiz.com> + * KĂ©vin Raymond <k.raymond@overkiz.com> + * Dorian Rocipon <d.rocipon@overkiz.com> + */ +/dts-v1/; +#include "at91-kizboxmini-common.dtsi" + +/ { + model = "Overkiz SmartKiz"; + compatible = "overkiz,smartkiz", "atmel,at91sam9g25", + "atmel,at91sam9x5", "atmel,at91sam9"; + + clocks { + adc_op_clk { + status = "okay"; + }; + }; + + aliases { + serial5 = &uart0; + }; + + pio_keys { + hk_reset { + label = "HK_RESET"; + gpios = <&pioC 13 GPIO_ACTIVE_HIGH>; + }; + + power_rf { + label = "POWER_RF"; + gpios = <&pioA 20 GPIO_ACTIVE_HIGH>; + }; + + power_wifi { + label = "POWER_WIFI"; + gpios = <&pioA 21 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&pinctrl { + i2c1 { + pinctrl_i2c1: i2c1-0 { + atmel,pins = + <AT91_PIOC 0 AT91_PERIPH_C AT91_PINCTRL_PULL_UP + AT91_PIOC 1 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>; + }; + }; + + adc0 { + pinctrl_adc0_ad0: adc0_ad0-0 { + /* pull-up disable */ + atmel,pins = <AT91_PIOB 11 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; + pinctrl_adc0_ad5: adc0_ad5-0 { + /* pull-up disable */ + atmel,pins = <AT91_PIOB 16 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; + pinctrl_adc0_ad6: adc0_ad6-0 { + /* pull-up disable */ + atmel,pins = <AT91_PIOB 17 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; + pinctrl_adc0_ad11: adc0_ad11-0 { + /* pull-up disable */ + atmel,pins = <AT91_PIOB 10 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; + }; +}; + +&i2c1 { + dmas = <0>, <0>; + pinctrl-0 = <&pinctrl_i2c1>; + status = "disabled"; +}; + +&macb0 { + status = "disabled"; +}; + +&rtc { + status = "okay"; +}; + +&leds { + blue { + status = "okay"; + }; +}; + +&adc0 { + atmel,adc-vref = <2500>; + pinctrl-names = "default"; + pinctrl-0 = < + &pinctrl_adc0_ad0 + &pinctrl_adc0_ad5 + &pinctrl_adc0_ad6 + &pinctrl_adc0_ad11 + >; + atmel,adc-channels-used = <0x0861>; + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi index dee9c0c8a096..6afbb48e7ff0 100644 --- a/arch/arm/boot/dts/at91sam9260.dtsi +++ b/arch/arm/boot/dts/at91sam9260.dtsi @@ -187,7 +187,7 @@ usart0 { pinctrl_usart0: usart0-0 { atmel,pins = - <AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE + <AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; }; @@ -221,7 +221,7 @@ usart1 { pinctrl_usart1: usart1-0 { atmel,pins = - <AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE + <AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; }; @@ -239,7 +239,7 @@ usart2 { pinctrl_usart2: usart2-0 { atmel,pins = - <AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE + <AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; }; @@ -257,7 +257,7 @@ usart3 { pinctrl_usart3: usart3-0 { atmel,pins = - <AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE + <AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; }; @@ -275,7 +275,7 @@ uart0 { pinctrl_uart0: uart0-0 { atmel,pins = - <AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_NONE + <AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_PULL_UP AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; }; }; @@ -283,7 +283,7 @@ uart1 { pinctrl_uart1: uart1-0 { atmel,pins = - <AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE + <AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; }; }; @@ -738,7 +738,7 @@ status = "disabled"; }; - watchdog@fffffd40 { + watchdog: watchdog@fffffd40 { compatible = "atmel,at91sam9260-wdt"; reg = <0xfffffd40 0x10>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; @@ -793,7 +793,7 @@ }; }; - i2c-gpio-0 { + i2c_gpio0: i2c-gpio-0 { compatible = "i2c-gpio"; gpios = <&pioA 23 GPIO_ACTIVE_HIGH /* sda */ &pioA 24 GPIO_ACTIVE_HIGH /* scl */ diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi index dba025a98527..5ed3d745ac86 100644 --- a/arch/arm/boot/dts/at91sam9261.dtsi +++ b/arch/arm/boot/dts/at91sam9261.dtsi @@ -329,7 +329,7 @@ usart0 { pinctrl_usart0: usart0-0 { atmel,pins = - <AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>, <AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; }; @@ -347,7 +347,7 @@ usart1 { pinctrl_usart1: usart1-0 { atmel,pins = - <AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>, <AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; }; @@ -365,7 +365,7 @@ usart2 { pinctrl_usart2: usart2-0 { atmel,pins = - <AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>, <AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; }; diff --git a/arch/arm/boot/dts/at91sam9261ek.dts b/arch/arm/boot/dts/at91sam9261ek.dts index 7debdeabcf2f..c4ef74fea97c 100644 --- a/arch/arm/boot/dts/at91sam9261ek.dts +++ b/arch/arm/boot/dts/at91sam9261ek.dts @@ -40,7 +40,7 @@ atmel,power-control-gpio = <&pioA 12 GPIO_ACTIVE_LOW>; status = "okay"; - display0: display { + display0: panel { bits-per-pixel = <16>; atmel,lcdcon-backlight; atmel,dmacon = <0x1>; diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index 99678abdda93..5c990cfae254 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -183,7 +183,7 @@ usart0 { pinctrl_usart0: usart0-0 { atmel,pins = - <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE + <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_PULL_UP AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; }; @@ -201,7 +201,7 @@ usart1 { pinctrl_usart1: usart1-0 { atmel,pins = - <AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_NONE + <AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; }; @@ -219,7 +219,7 @@ usart2 { pinctrl_usart2: usart2-0 { atmel,pins = - <AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_NONE + <AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_PULL_UP AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; }; diff --git a/arch/arm/boot/dts/at91sam9263ek.dts b/arch/arm/boot/dts/at91sam9263ek.dts index 45e0c6e88cab..62d218542a48 100644 --- a/arch/arm/boot/dts/at91sam9263ek.dts +++ b/arch/arm/boot/dts/at91sam9263ek.dts @@ -110,7 +110,7 @@ display = <&display0>; status = "okay"; - display0: display { + display0: panel { bits-per-pixel = <16>; atmel,lcdcon-backlight; atmel,dmacon = <0x1>; diff --git a/arch/arm/boot/dts/at91sam9g15.dtsi b/arch/arm/boot/dts/at91sam9g15.dtsi index d77c69ad7f02..dde88276fe52 100644 --- a/arch/arm/boot/dts/at91sam9g15.dtsi +++ b/arch/arm/boot/dts/at91sam9g15.dtsi @@ -11,22 +11,18 @@ / { model = "Atmel AT91SAM9G15 SoC"; compatible = "atmel,at91sam9g15", "atmel,at91sam9x5"; +}; - ahb { - apb { - pinctrl@fffff400 { - atmel,mux-mask = < - /* A B C */ - 0xffffffff 0xffe0399f 0x00000000 /* pioA */ - 0x00040000 0x00047e3f 0x00000000 /* pioB */ - 0xfdffffff 0x00000000 0xb83fffff /* pioC */ - 0x003fffff 0x003f8000 0x00000000 /* pioD */ - >; - }; +&pinctrl { + atmel,mux-mask = < + /* A B C */ + 0xffffffff 0xffe0399f 0x00000000 /* pioA */ + 0x00040000 0x00047e3f 0x00000000 /* pioB */ + 0xfdffffff 0x00000000 0xb83fffff /* pioC */ + 0x003fffff 0x003f8000 0x00000000 /* pioD */ + >; +}; - pmc: pmc@fffffc00 { - compatible = "atmel,at91sam9g15-pmc", "atmel,at91sam9x5-pmc", "syscon"; - }; - }; - }; +&pmc { + compatible = "atmel,at91sam9g15-pmc", "atmel,at91sam9x5-pmc", "syscon"; }; diff --git a/arch/arm/boot/dts/at91sam9g15ek.dts b/arch/arm/boot/dts/at91sam9g15ek.dts index 97100d298400..889a5097eb2d 100644 --- a/arch/arm/boot/dts/at91sam9g15ek.dts +++ b/arch/arm/boot/dts/at91sam9g15ek.dts @@ -14,14 +14,6 @@ model = "Atmel AT91SAM9G15-EK"; compatible = "atmel,at91sam9g15ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9"; - ahb { - apb { - hlcdc: hlcdc@f8038000 { - status = "okay"; - }; - }; - }; - backlight: backlight { status = "okay"; }; @@ -38,3 +30,7 @@ status = "okay"; }; }; + +&hlcdc { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/at91sam9g25ek.dts b/arch/arm/boot/dts/at91sam9g25ek.dts index a02c6c79ce52..61b0bdb615dc 100644 --- a/arch/arm/boot/dts/at91sam9g25ek.dts +++ b/arch/arm/boot/dts/at91sam9g25ek.dts @@ -12,57 +12,54 @@ / { model = "Atmel AT91SAM9G25-EK"; compatible = "atmel,at91sam9g25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9"; +}; - ahb { - apb { - spi0: spi@f0000000 { - status = "disabled"; - }; - - mmc1: mmc@f000c000 { - status = "disabled"; - }; - - i2c0: i2c@f8010000 { - ov2640: camera@30 { - compatible = "ovti,ov2640"; - reg = <0x30>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pck0_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>; - resetb-gpios = <&pioA 7 GPIO_ACTIVE_LOW>; - pwdn-gpios = <&pioA 13 GPIO_ACTIVE_HIGH>; - clocks = <&pmc PMC_TYPE_SYSTEM 8>; - clock-names = "xvclk"; - assigned-clocks = <&pmc PMC_TYPE_SYSTEM 8>; - assigned-clock-rates = <25000000>; - status = "okay"; +&i2c0 { + camera@30 { + compatible = "ovti,ov2640"; + reg = <0x30>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pck0_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>; + resetb-gpios = <&pioA 7 GPIO_ACTIVE_LOW>; + pwdn-gpios = <&pioA 13 GPIO_ACTIVE_HIGH>; + clocks = <&pmc PMC_TYPE_SYSTEM 8>; + clock-names = "xvclk"; + assigned-clocks = <&pmc PMC_TYPE_SYSTEM 8>; + assigned-clock-rates = <25000000>; + status = "okay"; - port { - ov2640_0: endpoint { - remote-endpoint = <&isi_0>; - bus-width = <8>; - }; - }; - }; + port { + ov2640_0: endpoint { + remote-endpoint = <&isi_0>; + bus-width = <8>; }; + }; + }; +}; - macb0: ethernet@f802c000 { - phy-mode = "rmii"; - status = "okay"; - }; +&isi { + status = "okay"; - isi: isi@f8048000 { - status = "okay"; - port { - isi_0: endpoint@0 { - reg = <0>; - remote-endpoint = <&ov2640_0>; - bus-width = <8>; - vsync-active = <1>; - hsync-active = <1>; - }; - }; - }; + port { + isi_0: endpoint@0 { + reg = <0>; + remote-endpoint = <&ov2640_0>; + bus-width = <8>; + vsync-active = <1>; + hsync-active = <1>; }; }; }; + +&macb0 { + phy-mode = "rmii"; + status = "okay"; +}; + +&mmc1 { + status = "disabled"; +}; + +&spi0 { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/at91sam9g35ek.dts b/arch/arm/boot/dts/at91sam9g35ek.dts index 449ec712ab52..f966b56de63c 100644 --- a/arch/arm/boot/dts/at91sam9g35ek.dts +++ b/arch/arm/boot/dts/at91sam9g35ek.dts @@ -14,19 +14,6 @@ model = "Atmel AT91SAM9G35-EK"; compatible = "atmel,at91sam9g35ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9"; - ahb { - apb { - macb0: ethernet@f802c000 { - phy-mode = "rmii"; - status = "okay"; - }; - - hlcdc: hlcdc@f8038000 { - status = "okay"; - }; - }; - }; - backlight: backlight { status = "okay"; }; @@ -43,3 +30,12 @@ status = "okay"; }; }; + +&hlcdc { + status = "okay"; +}; + +&macb0 { + phy-mode = "rmii"; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index 691c95ea6175..fd179097a4bf 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -556,7 +556,7 @@ usart0 { pinctrl_usart0: usart0-0 { atmel,pins = - <AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_NONE + <AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; }; @@ -574,7 +574,7 @@ usart1 { pinctrl_usart1: usart1-0 { atmel,pins = - <AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE + <AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; }; @@ -592,7 +592,7 @@ usart2 { pinctrl_usart2: usart2-0 { atmel,pins = - <AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE + <AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; }; @@ -610,7 +610,7 @@ usart3 { pinctrl_usart3: usart3-0 { atmel,pins = - <AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE + <AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; }; diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts index 06d74ff1a7d0..84bed6f55fcd 100644 --- a/arch/arm/boot/dts/at91sam9m10g45ek.dts +++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts @@ -235,7 +235,7 @@ display = <&display0>; status = "okay"; - display0: display { + display0: panel { bits-per-pixel = <32>; atmel,lcdcon-backlight; atmel,dmacon = <0x1>; diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/at91sam9rl.dtsi index 8643b7151565..ea024e4b6e09 100644 --- a/arch/arm/boot/dts/at91sam9rl.dtsi +++ b/arch/arm/boot/dts/at91sam9rl.dtsi @@ -682,7 +682,7 @@ usart0 { pinctrl_usart0: usart0-0 { atmel,pins = - <AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>, <AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; }; @@ -721,7 +721,7 @@ usart1 { pinctrl_usart1: usart1-0 { atmel,pins = - <AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>, <AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; }; @@ -744,7 +744,7 @@ usart2 { pinctrl_usart2: usart2-0 { atmel,pins = - <AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>, <AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; }; @@ -767,7 +767,7 @@ usart3 { pinctrl_usart3: usart3-0 { atmel,pins = - <AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>, <AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; }; diff --git a/arch/arm/boot/dts/at91sam9rlek.dts b/arch/arm/boot/dts/at91sam9rlek.dts index 3a3869444fdc..0de75d3c4f18 100644 --- a/arch/arm/boot/dts/at91sam9rlek.dts +++ b/arch/arm/boot/dts/at91sam9rlek.dts @@ -36,7 +36,7 @@ display = <&display0>; status = "okay"; - display0: display { + display0: panel { bits-per-pixel = <16>; atmel,lcdcon-backlight; atmel,dmacon = <0x1>; diff --git a/arch/arm/boot/dts/at91sam9x25ek.dts b/arch/arm/boot/dts/at91sam9x25ek.dts index 4e1c3df89a6c..ad7c6b36f0ba 100644 --- a/arch/arm/boot/dts/at91sam9x25ek.dts +++ b/arch/arm/boot/dts/at91sam9x25ek.dts @@ -12,28 +12,24 @@ / { model = "Atmel AT91SAM9X25-EK"; compatible = "atmel,at91sam9x25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9"; +}; - ahb { - apb { - can1: can@f8004000 { - status = "okay"; - }; +&can1 { + status = "okay"; +}; - macb0: ethernet@f802c000 { - phy-mode = "rmii"; - status = "okay"; - }; +&macb0 { + phy-mode = "rmii"; + status = "okay"; +}; - macb1: ethernet@f8030000 { - phy-mode = "rmii"; - status = "okay"; - }; +&macb1 { + phy-mode = "rmii"; + status = "okay"; +}; - pwm0: pwm@f8034000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm0_pwm0_1>; - status = "okay"; - }; - }; - }; +&pwm0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_pwm0_1>; + status = "okay"; }; diff --git a/arch/arm/boot/dts/at91sam9x35ek.dts b/arch/arm/boot/dts/at91sam9x35ek.dts index 7646c680fa97..66675c787b97 100644 --- a/arch/arm/boot/dts/at91sam9x35ek.dts +++ b/arch/arm/boot/dts/at91sam9x35ek.dts @@ -13,32 +13,29 @@ / { model = "Atmel AT91SAM9X35-EK"; compatible = "atmel,at91sam9x35ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9"; +}; - ahb { - apb { - macb0: ethernet@f802c000 { - phy-mode = "rmii"; - status = "okay"; - }; - hlcdc: hlcdc@f8038000 { - status = "okay"; - }; - }; - }; +&backlight { + status = "okay"; +}; - backlight: backlight { - status = "okay"; - }; +&bl_reg { + status = "okay"; +}; - bl_reg: backlight_regulator { - status = "okay"; - }; +&hlcdc { + status = "okay"; +}; - panel: panel { - status = "okay"; - }; +&macb0 { + phy-mode = "rmii"; + status = "okay"; +}; + +&panel { + status = "okay"; +}; - panel_reg: panel_regulator { - status = "okay"; - }; +&panel_reg { + status = "okay"; }; diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index ef47c005ef03..7c2eb93f8cac 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -941,7 +941,7 @@ status = "disabled"; }; - rtc@fffffeb0 { + rtc: rtc@fffffeb0 { compatible = "atmel,at91sam9x5-rtc"; reg = <0xfffffeb0 0x40>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; diff --git a/arch/arm/boot/dts/at91sam9x5_lcd.dtsi b/arch/arm/boot/dts/at91sam9x5_lcd.dtsi index 584f840cc6a5..f81c9d1691e0 100644 --- a/arch/arm/boot/dts/at91sam9x5_lcd.dtsi +++ b/arch/arm/boot/dts/at91sam9x5_lcd.dtsi @@ -39,109 +39,109 @@ #pwm-cells = <3>; }; }; + }; + }; +}; - pinctrl@fffff400 { - lcd { - pinctrl_lcd_base: lcd-base-0 { - atmel,pins = - <AT91_PIOC 27 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDVSYNC */ - AT91_PIOC 28 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDHSYNC */ - AT91_PIOC 24 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDDISP */ - AT91_PIOC 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDDEN */ - AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDPCK */ - }; +&pinctrl { + lcd { + pinctrl_lcd_base: lcd-base-0 { + atmel,pins = + <AT91_PIOC 27 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDVSYNC */ + AT91_PIOC 28 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDHSYNC */ + AT91_PIOC 24 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDDISP */ + AT91_PIOC 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDDEN */ + AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDPCK */ + }; - pinctrl_lcd_pwm: lcd-pwm-0 { - atmel,pins = <AT91_PIOC 26 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDPWM */ - }; + pinctrl_lcd_pwm: lcd-pwm-0 { + atmel,pins = <AT91_PIOC 26 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDPWM */ + }; - pinctrl_lcd_rgb444: lcd-rgb-0 { - atmel,pins = - <AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD0 pin */ - AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD1 pin */ - AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD2 pin */ - AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD3 pin */ - AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD4 pin */ - AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD5 pin */ - AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD6 pin */ - AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD7 pin */ - AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD8 pin */ - AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD9 pin */ - AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD10 pin */ - AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDD11 pin */ - }; + pinctrl_lcd_rgb444: lcd-rgb-0 { + atmel,pins = + <AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD0 pin */ + AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD1 pin */ + AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD2 pin */ + AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD3 pin */ + AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD4 pin */ + AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD5 pin */ + AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD6 pin */ + AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD7 pin */ + AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD8 pin */ + AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD9 pin */ + AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD10 pin */ + AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDD11 pin */ + }; - pinctrl_lcd_rgb565: lcd-rgb-1 { - atmel,pins = - <AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD0 pin */ - AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD1 pin */ - AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD2 pin */ - AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD3 pin */ - AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD4 pin */ - AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD5 pin */ - AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD6 pin */ - AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD7 pin */ - AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD8 pin */ - AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD9 pin */ - AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD10 pin */ - AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD11 pin */ - AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD12 pin */ - AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD13 pin */ - AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD14 pin */ - AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDD15 pin */ - }; + pinctrl_lcd_rgb565: lcd-rgb-1 { + atmel,pins = + <AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD0 pin */ + AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD1 pin */ + AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD2 pin */ + AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD3 pin */ + AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD4 pin */ + AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD5 pin */ + AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD6 pin */ + AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD7 pin */ + AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD8 pin */ + AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD9 pin */ + AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD10 pin */ + AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD11 pin */ + AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD12 pin */ + AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD13 pin */ + AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD14 pin */ + AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDD15 pin */ + }; - pinctrl_lcd_rgb666: lcd-rgb-2 { - atmel,pins = - <AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD0 pin */ - AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD1 pin */ - AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD2 pin */ - AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD3 pin */ - AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD4 pin */ - AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD5 pin */ - AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD6 pin */ - AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD7 pin */ - AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD8 pin */ - AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD9 pin */ - AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD10 pin */ - AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD11 pin */ - AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD12 pin */ - AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD13 pin */ - AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD14 pin */ - AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD15 pin */ - AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD16 pin */ - AT91_PIOC 17 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDD17 pin */ - }; + pinctrl_lcd_rgb666: lcd-rgb-2 { + atmel,pins = + <AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD0 pin */ + AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD1 pin */ + AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD2 pin */ + AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD3 pin */ + AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD4 pin */ + AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD5 pin */ + AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD6 pin */ + AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD7 pin */ + AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD8 pin */ + AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD9 pin */ + AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD10 pin */ + AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD11 pin */ + AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD12 pin */ + AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD13 pin */ + AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD14 pin */ + AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD15 pin */ + AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD16 pin */ + AT91_PIOC 17 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDD17 pin */ + }; - pinctrl_lcd_rgb888: lcd-rgb-3 { - atmel,pins = - <AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD0 pin */ - AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD1 pin */ - AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD2 pin */ - AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD3 pin */ - AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD4 pin */ - AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD5 pin */ - AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD6 pin */ - AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD7 pin */ - AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD8 pin */ - AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD9 pin */ - AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD10 pin */ - AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD11 pin */ - AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD12 pin */ - AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD13 pin */ - AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD14 pin */ - AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD15 pin */ - AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD16 pin */ - AT91_PIOC 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD17 pin */ - AT91_PIOC 18 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD18 pin */ - AT91_PIOC 19 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD19 pin */ - AT91_PIOC 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD20 pin */ - AT91_PIOC 21 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD21 pin */ - AT91_PIOC 22 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD22 pin */ - AT91_PIOC 23 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDD23 pin */ - }; - }; - }; + pinctrl_lcd_rgb888: lcd-rgb-3 { + atmel,pins = + <AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD0 pin */ + AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD1 pin */ + AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD2 pin */ + AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD3 pin */ + AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD4 pin */ + AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD5 pin */ + AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD6 pin */ + AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD7 pin */ + AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD8 pin */ + AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD9 pin */ + AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD10 pin */ + AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD11 pin */ + AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD12 pin */ + AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD13 pin */ + AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD14 pin */ + AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD15 pin */ + AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD16 pin */ + AT91_PIOC 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD17 pin */ + AT91_PIOC 18 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD18 pin */ + AT91_PIOC 19 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD19 pin */ + AT91_PIOC 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD20 pin */ + AT91_PIOC 21 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD21 pin */ + AT91_PIOC 22 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD22 pin */ + AT91_PIOC 23 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDD23 pin */ }; }; }; diff --git a/arch/arm/boot/dts/at91sam9x5dm.dtsi b/arch/arm/boot/dts/at91sam9x5dm.dtsi index b04ebf1a3131..7f00c1f57b90 100644 --- a/arch/arm/boot/dts/at91sam9x5dm.dtsi +++ b/arch/arm/boot/dts/at91sam9x5dm.dtsi @@ -9,51 +9,6 @@ */ / { - ahb { - apb { - i2c0: i2c@f8010000 { - qt1070: keyboard@1b { - compatible = "qt1070"; - reg = <0x1b>; - interrupt-parent = <&pioA>; - interrupts = <7 0x0>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_qt1070_irq>; - wakeup-source; - }; - }; - - hlcdc: hlcdc@f8038000 { - hlcdc-display-controller { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>; - - port@0 { - hlcdc_panel_output: endpoint@0 { - reg = <0>; - remote-endpoint = <&panel_input>; - }; - }; - }; - }; - - adc0: adc@f804c000 { - atmel,adc-ts-wires = <4>; - atmel,adc-ts-pressure-threshold = <10000>; - status = "okay"; - }; - - pinctrl@fffff400 { - board { - pinctrl_qt1070_irq: qt1070_irq { - atmel,pins = - <AT91_PIOA 7 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; - }; - }; - }; - }; - }; - backlight: backlight { compatible = "pwm-backlight"; pwms = <&hlcdc_pwm 0 50000 0>; @@ -98,3 +53,44 @@ status = "disabled"; }; }; + +&adc0 { + atmel,adc-ts-wires = <4>; + atmel,adc-ts-pressure-threshold = <10000>; + status = "okay"; +}; + +&i2c0 { + keyboard@1b { + compatible = "qt1070"; + reg = <0x1b>; + interrupt-parent = <&pioA>; + interrupts = <7 0x0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qt1070_irq>; + wakeup-source; + }; +}; + +&hlcdc { + hlcdc-display-controller { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>; + + port@0 { + hlcdc_panel_output: endpoint@0 { + reg = <0>; + remote-endpoint = <&panel_input>; + }; + }; + }; +}; + +&pinctrl { + board { + pinctrl_qt1070_irq: qt1070_irq { + atmel,pins = + <AT91_PIOA 7 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91sam9x5ek.dtsi b/arch/arm/boot/dts/at91sam9x5ek.dtsi index 2ad0a43656e4..c934928742b0 100644 --- a/arch/arm/boot/dts/at91sam9x5ek.dtsi +++ b/arch/arm/boot/dts/at91sam9x5ek.dtsi @@ -16,139 +16,6 @@ stdout-path = "serial0:115200n8"; }; - ahb { - apb { - mmc0: mmc@f0008000 { - pinctrl-0 = < - &pinctrl_board_mmc0 - &pinctrl_mmc0_slot0_clk_cmd_dat0 - &pinctrl_mmc0_slot0_dat1_3>; - status = "okay"; - slot@0 { - reg = <0>; - bus-width = <4>; - cd-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>; - }; - }; - - mmc1: mmc@f000c000 { - pinctrl-0 = < - &pinctrl_board_mmc1 - &pinctrl_mmc1_slot0_clk_cmd_dat0 - &pinctrl_mmc1_slot0_dat1_3>; - status = "okay"; - slot@0 { - reg = <0>; - bus-width = <4>; - cd-gpios = <&pioD 14 GPIO_ACTIVE_HIGH>; - }; - }; - - dbgu: serial@fffff200 { - status = "okay"; - }; - - usart0: serial@f801c000 { - atmel,use-dma-rx; - atmel,use-dma-tx; - status = "okay"; - }; - - usb2: gadget@f803c000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_board_usb2>; - atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>; - status = "okay"; - }; - - i2c0: i2c@f8010000 { - status = "okay"; - - wm8731: wm8731@1a { - compatible = "wm8731"; - reg = <0x1a>; - }; - }; - - adc0: adc@f804c000 { - atmel,adc-ts-wires = <4>; - atmel,adc-ts-pressure-threshold = <10000>; - status = "okay"; - }; - - pinctrl@fffff400 { - camera_sensor { - pinctrl_pck0_as_isi_mck: pck0_as_isi_mck-0 { - atmel,pins = - <AT91_PIOC 15 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* ISI_MCK */ - }; - - pinctrl_sensor_power: sensor_power-0 { - atmel,pins = - <AT91_PIOA 13 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; - }; - - pinctrl_sensor_reset: sensor_reset-0 { - atmel,pins = - <AT91_PIOA 7 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; - }; - }; - - mmc0 { - pinctrl_board_mmc0: mmc0-board { - atmel,pins = - <AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD15 gpio CD pin pull up and deglitch */ - }; - }; - - mmc1 { - pinctrl_board_mmc1: mmc1-board { - atmel,pins = - <AT91_PIOD 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD14 gpio CD pin pull up and deglitch */ - }; - }; - - usb2 { - pinctrl_board_usb2: usb2-board { - atmel,pins = - <AT91_PIOB 16 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* PB16 gpio vbus sense, deglitch */ - }; - }; - }; - - spi0: spi@f0000000 { - status = "disabled"; /* conflicts with mmc1 */ - cs-gpios = <&pioA 14 0>, <0>, <0>, <0>; - m25p80@0 { - compatible = "atmel,at25df321a"; - spi-max-frequency = <50000000>; - reg = <0>; - }; - }; - - watchdog@fffffe40 { - status = "okay"; - }; - - ssc0: ssc@f0010000 { - status = "okay"; - }; - }; - - usb0: ohci@600000 { - status = "okay"; - num-ports = <3>; - atmel,vbus-gpio = <0 /* &pioD 18 GPIO_ACTIVE_LOW *//* Activate to have access to port A */ - &pioD 19 GPIO_ACTIVE_LOW - &pioD 20 GPIO_ACTIVE_LOW - >; - }; - - usb1: ehci@700000 { - status = "okay"; - }; - }; - sound { compatible = "atmel,sam9x5-wm8731-audio"; @@ -164,3 +31,135 @@ atmel,audio-codec = <&wm8731>; }; }; + +&adc0 { + atmel,adc-ts-wires = <4>; + atmel,adc-ts-pressure-threshold = <10000>; + status = "okay"; +}; + +&dbgu { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + wm8731: wm8731@1a { + compatible = "wm8731"; + reg = <0x1a>; + }; +}; + +&mmc0 { + pinctrl-0 = < + &pinctrl_board_mmc0 + &pinctrl_mmc0_slot0_clk_cmd_dat0 + &pinctrl_mmc0_slot0_dat1_3>; + status = "okay"; + + slot@0 { + reg = <0>; + bus-width = <4>; + cd-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>; + }; +}; + +&mmc1 { + pinctrl-0 = < + &pinctrl_board_mmc1 + &pinctrl_mmc1_slot0_clk_cmd_dat0 + &pinctrl_mmc1_slot0_dat1_3>; + status = "okay"; + + slot@0 { + reg = <0>; + bus-width = <4>; + cd-gpios = <&pioD 14 GPIO_ACTIVE_HIGH>; + }; +}; + +&pinctrl { + camera_sensor { + pinctrl_pck0_as_isi_mck: pck0_as_isi_mck-0 { + atmel,pins = + <AT91_PIOC 15 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* ISI_MCK */ + }; + + pinctrl_sensor_power: sensor_power-0 { + atmel,pins = + <AT91_PIOA 13 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; + + pinctrl_sensor_reset: sensor_reset-0 { + atmel,pins = + <AT91_PIOA 7 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; + }; + + mmc0 { + pinctrl_board_mmc0: mmc0-board { + atmel,pins = + <AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD15 gpio CD pin pull up and deglitch */ + }; + }; + + mmc1 { + pinctrl_board_mmc1: mmc1-board { + atmel,pins = + <AT91_PIOD 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD14 gpio CD pin pull up and deglitch */ + }; + }; + + usb2 { + pinctrl_board_usb2: usb2-board { + atmel,pins = + <AT91_PIOB 16 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* PB16 gpio vbus sense, deglitch */ + }; + }; +}; + +&spi0 { + cs-gpios = <&pioA 14 0>, <0>, <0>, <0>; + status = "disabled"; /* conflicts with mmc1 */ + + m25p80@0 { + compatible = "atmel,at25df321a"; + spi-max-frequency = <50000000>; + reg = <0>; + }; +}; + +&ssc0 { + status = "okay"; +}; + +&usart0 { + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "okay"; +}; + +&usb0 { + num-ports = <3>; + atmel,vbus-gpio = <0 /* &pioD 18 GPIO_ACTIVE_LOW *//* Activate to have access to port A */ + &pioD 19 GPIO_ACTIVE_LOW + &pioD 20 GPIO_ACTIVE_LOW + >; + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; + +&usb2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_board_usb2>; + atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&watchdog { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/atlas7-evb.dts b/arch/arm/boot/dts/atlas7-evb.dts index e0c0291ac9fd..e0515043d145 100644 --- a/arch/arm/boot/dts/atlas7-evb.dts +++ b/arch/arm/boot/dts/atlas7-evb.dts @@ -119,7 +119,7 @@ label = "rearview key"; linux,code = <KEY_CAMERA>; gpios = <&gpio_1 3 GPIO_ACTIVE_LOW>; - debounce_interval = <100>; + debounce-interval = <100>; }; }; diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi index 2dac3efc7640..1bc45cfd5453 100644 --- a/arch/arm/boot/dts/bcm-cygnus.dtsi +++ b/arch/arm/boot/dts/bcm-cygnus.dtsi @@ -174,8 +174,8 @@ mdio: mdio@18002000 { compatible = "brcm,iproc-mdio"; reg = <0x18002000 0x8>; - #size-cells = <1>; - #address-cells = <0>; + #size-cells = <0>; + #address-cells = <1>; status = "disabled"; gphy0: ethernet-phy@0 { diff --git a/arch/arm/boot/dts/bcm-hr2.dtsi b/arch/arm/boot/dts/bcm-hr2.dtsi index e4d49731287f..6142c672811e 100644 --- a/arch/arm/boot/dts/bcm-hr2.dtsi +++ b/arch/arm/boot/dts/bcm-hr2.dtsi @@ -268,7 +268,7 @@ clock-frequency = <100000>; }; - watchdog@39000 { + watchdog: watchdog@39000 { compatible = "arm,sp805", "arm,primecell"; reg = <0x39000 0x1000>; interrupts = <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts new file mode 100644 index 000000000000..1b5a835f66bd --- /dev/null +++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts @@ -0,0 +1,140 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; +#include "bcm2711.dtsi" +#include "bcm2835-rpi.dtsi" +#include "bcm283x-rpi-usb-peripheral.dtsi" + +/ { + compatible = "raspberrypi,4-model-b", "brcm,bcm2711"; + model = "Raspberry Pi 4 Model B"; + + chosen { + /* 8250 auxiliary UART instead of pl011 */ + stdout-path = "serial1:115200n8"; + }; + + /* Will be filled by the bootloader */ + memory@0 { + device_type = "memory"; + reg = <0 0 0>; + }; + + aliases { + ethernet0 = &genet; + }; + + leds { + act { + gpios = <&gpio 42 GPIO_ACTIVE_HIGH>; + }; + + pwr { + label = "PWR"; + gpios = <&expgpio 2 GPIO_ACTIVE_LOW>; + }; + }; + + wifi_pwrseq: wifi-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>; + }; + + sd_io_1v8_reg: sd_io_1v8_reg { + compatible = "regulator-gpio"; + regulator-name = "vdd-sd-io"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + regulator-settling-time-us = <5000>; + gpios = <&expgpio 4 GPIO_ACTIVE_HIGH>; + states = <1800000 0x1 + 3300000 0x0>; + status = "okay"; + }; +}; + +&firmware { + expgpio: gpio { + compatible = "raspberrypi,firmware-gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "BT_ON", + "WL_ON", + "PWR_LED_OFF", + "GLOBAL_RESET", + "VDD_SD_IO_SEL", + "CAM_GPIO", + "", + ""; + status = "okay"; + }; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm1_0_gpio40 &pwm1_1_gpio41>; + status = "okay"; +}; + +/* SDHCI is used to control the SDIO for wireless */ +&sdhci { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_gpio34>; + bus-width = <4>; + non-removable; + mmc-pwrseq = <&wifi_pwrseq>; + status = "okay"; + + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; + +/* EMMC2 is used to drive the SD card */ +&emmc2 { + vqmmc-supply = <&sd_io_1v8_reg>; + broken-cd; + status = "okay"; +}; + +&genet { + phy-handle = <&phy1>; + phy-mode = "rgmii-rxid"; + status = "okay"; +}; + +&genet_mdio { + phy1: ethernet-phy@1 { + /* No PHY interrupt */ + reg = <0x1>; + }; +}; + +/* uart0 communicates with the BT module */ +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32>; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + max-speed = <2000000>; + shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>; + }; +}; + +/* uart1 is mapped to the pin header */ +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_gpio14>; + status = "okay"; +}; + +&vchiq { + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; +}; diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi new file mode 100644 index 000000000000..d1e684d0acfd --- /dev/null +++ b/arch/arm/boot/dts/bcm2711.dtsi @@ -0,0 +1,922 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "bcm283x.dtsi" + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/soc/bcm2835-pm.h> + +/ { + compatible = "brcm,bcm2711"; + + #address-cells = <2>; + #size-cells = <1>; + + interrupt-parent = <&gicv2>; + + soc { + /* + * Defined ranges: + * Common BCM283x peripherals + * BCM2711-specific peripherals + * ARM-local peripherals + */ + ranges = <0x7e000000 0x0 0xfe000000 0x01800000>, + <0x7c000000 0x0 0xfc000000 0x02000000>, + <0x40000000 0x0 0xff800000 0x00800000>; + /* Emulate a contiguous 30-bit address range for DMA */ + dma-ranges = <0xc0000000 0x0 0x00000000 0x40000000>; + + /* + * This node is the provider for the enable-method for + * bringing up secondary cores. + */ + local_intc: local_intc@40000000 { + compatible = "brcm,bcm2836-l1-intc"; + reg = <0x40000000 0x100>; + }; + + gicv2: interrupt-controller@40041000 { + interrupt-controller; + #interrupt-cells = <3>; + compatible = "arm,gic-400"; + reg = <0x40041000 0x1000>, + <0x40042000 0x2000>, + <0x40044000 0x2000>, + <0x40046000 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_HIGH)>; + }; + + avs_monitor: avs-monitor@7d5d2000 { + compatible = "brcm,bcm2711-avs-monitor", + "syscon", "simple-mfd"; + reg = <0x7d5d2000 0xf00>; + + thermal: thermal { + compatible = "brcm,bcm2711-thermal"; + #thermal-sensor-cells = <0>; + }; + }; + + dma: dma@7e007000 { + compatible = "brcm,bcm2835-dma"; + reg = <0x7e007000 0xb00>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, + /* DMA lite 7 - 10 */ + <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "dma0", + "dma1", + "dma2", + "dma3", + "dma4", + "dma5", + "dma6", + "dma7", + "dma8", + "dma9", + "dma10"; + #dma-cells = <1>; + brcm,dma-channel-mask = <0x07f5>; + }; + + pm: watchdog@7e100000 { + compatible = "brcm,bcm2835-pm", "brcm,bcm2835-pm-wdt"; + #power-domain-cells = <1>; + #reset-cells = <1>; + reg = <0x7e100000 0x114>, + <0x7e00a000 0x24>, + <0x7ec11000 0x20>; + clocks = <&clocks BCM2835_CLOCK_V3D>, + <&clocks BCM2835_CLOCK_PERI_IMAGE>, + <&clocks BCM2835_CLOCK_H264>, + <&clocks BCM2835_CLOCK_ISP>; + clock-names = "v3d", "peri_image", "h264", "isp"; + system-power-controller; + }; + + rng@7e104000 { + compatible = "brcm,bcm2711-rng200"; + reg = <0x7e104000 0x28>; + }; + + uart2: serial@7e201400 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x7e201400 0x200>; + interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clocks BCM2835_CLOCK_UART>, + <&clocks BCM2835_CLOCK_VPU>; + clock-names = "uartclk", "apb_pclk"; + arm,primecell-periphid = <0x00241011>; + status = "disabled"; + }; + + uart3: serial@7e201600 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x7e201600 0x200>; + interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clocks BCM2835_CLOCK_UART>, + <&clocks BCM2835_CLOCK_VPU>; + clock-names = "uartclk", "apb_pclk"; + arm,primecell-periphid = <0x00241011>; + status = "disabled"; + }; + + uart4: serial@7e201800 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x7e201800 0x200>; + interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clocks BCM2835_CLOCK_UART>, + <&clocks BCM2835_CLOCK_VPU>; + clock-names = "uartclk", "apb_pclk"; + arm,primecell-periphid = <0x00241011>; + status = "disabled"; + }; + + uart5: serial@7e201a00 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x7e201a00 0x200>; + interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clocks BCM2835_CLOCK_UART>, + <&clocks BCM2835_CLOCK_VPU>; + clock-names = "uartclk", "apb_pclk"; + arm,primecell-periphid = <0x00241011>; + status = "disabled"; + }; + + spi3: spi@7e204600 { + compatible = "brcm,bcm2835-spi"; + reg = <0x7e204600 0x0200>; + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clocks BCM2835_CLOCK_VPU>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi4: spi@7e204800 { + compatible = "brcm,bcm2835-spi"; + reg = <0x7e204800 0x0200>; + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clocks BCM2835_CLOCK_VPU>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi5: spi@7e204a00 { + compatible = "brcm,bcm2835-spi"; + reg = <0x7e204a00 0x0200>; + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clocks BCM2835_CLOCK_VPU>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi6: spi@7e204c00 { + compatible = "brcm,bcm2835-spi"; + reg = <0x7e204c00 0x0200>; + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clocks BCM2835_CLOCK_VPU>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@7e205600 { + compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c"; + reg = <0x7e205600 0x200>; + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clocks BCM2835_CLOCK_VPU>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c@7e205800 { + compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c"; + reg = <0x7e205800 0x200>; + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clocks BCM2835_CLOCK_VPU>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c5: i2c@7e205a00 { + compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c"; + reg = <0x7e205a00 0x200>; + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clocks BCM2835_CLOCK_VPU>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c6: i2c@7e205c00 { + compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c"; + reg = <0x7e205c00 0x200>; + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clocks BCM2835_CLOCK_VPU>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + pwm1: pwm@7e20c800 { + compatible = "brcm,bcm2835-pwm"; + reg = <0x7e20c800 0x28>; + clocks = <&clocks BCM2835_CLOCK_PWM>; + assigned-clocks = <&clocks BCM2835_CLOCK_PWM>; + assigned-clock-rates = <10000000>; + #pwm-cells = <2>; + status = "disabled"; + }; + + emmc2: emmc2@7e340000 { + compatible = "brcm,bcm2711-emmc2"; + reg = <0x7e340000 0x100>; + interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clocks BCM2711_CLOCK_EMMC2>; + status = "disabled"; + }; + + hvs@7e400000 { + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + arm-pmu { + compatible = "arm,cortex-a72-pmu", "arm,armv8-pmuv3"; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_LOW)>; + /* This only applies to the ARMv7 stub */ + arm,cpu-registers-not-fw-configured; + }; + + cpus: cpus { + #address-cells = <1>; + #size-cells = <0>; + enable-method = "brcm,bcm2836-smp"; // for ARM 32-bit + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0>; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x000000d8>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <1>; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x000000e0>; + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <2>; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x000000e8>; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <3>; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x000000f0>; + }; + }; + + scb { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + + ranges = <0x0 0x7c000000 0x0 0xfc000000 0x03800000>, + <0x6 0x00000000 0x6 0x00000000 0x40000000>; + + pcie0: pcie@7d500000 { + compatible = "brcm,bcm2711-pcie"; + reg = <0x0 0x7d500000 0x9310>; + device_type = "pci"; + #address-cells = <3>; + #interrupt-cells = <1>; + #size-cells = <2>; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pcie", "msi"; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143 + IRQ_TYPE_LEVEL_HIGH>; + msi-controller; + msi-parent = <&pcie0>; + + ranges = <0x02000000 0x0 0xf8000000 0x6 0x00000000 + 0x0 0x04000000>; + /* + * The wrapper around the PCIe block has a bug + * preventing it from accessing beyond the first 3GB of + * memory. + */ + dma-ranges = <0x02000000 0x0 0x00000000 0x0 0x00000000 + 0x0 0xc0000000>; + brcm,enable-ssc; + }; + + genet: ethernet@7d580000 { + compatible = "brcm,bcm2711-genet-v5"; + reg = <0x0 0x7d580000 0x10000>; + #address-cells = <0x1>; + #size-cells = <0x1>; + interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + + genet_mdio: mdio@e14 { + compatible = "brcm,genet-mdio-v5"; + reg = <0xe14 0x8>; + reg-names = "mdio"; + #address-cells = <0x0>; + #size-cells = <0x1>; + }; + }; + }; +}; + +&clk_osc { + clock-frequency = <54000000>; +}; + +&clocks { + compatible = "brcm,bcm2711-cprman"; +}; + +&cpu_thermal { + coefficients = <(-487) 410040>; + thermal-sensors = <&thermal>; +}; + +&dsi0 { + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; +}; + +&dsi1 { + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; +}; + +&gpio { + compatible = "brcm,bcm2711-gpio"; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + + gpclk0_gpio49: gpclk0_gpio49 { + pin-gpclk { + pins = "gpio49"; + function = "alt1"; + bias-disable; + }; + }; + gpclk1_gpio50: gpclk1_gpio50 { + pin-gpclk { + pins = "gpio50"; + function = "alt1"; + bias-disable; + }; + }; + gpclk2_gpio51: gpclk2_gpio51 { + pin-gpclk { + pins = "gpio51"; + function = "alt1"; + bias-disable; + }; + }; + + i2c0_gpio46: i2c0_gpio46 { + pin-sda { + function = "alt0"; + pins = "gpio46"; + bias-pull-up; + }; + pin-scl { + function = "alt0"; + pins = "gpio47"; + bias-disable; + }; + }; + i2c1_gpio46: i2c1_gpio46 { + pin-sda { + function = "alt1"; + pins = "gpio46"; + bias-pull-up; + }; + pin-scl { + function = "alt1"; + pins = "gpio47"; + bias-disable; + }; + }; + i2c3_gpio2: i2c3_gpio2 { + pin-sda { + function = "alt5"; + pins = "gpio2"; + bias-pull-up; + }; + pin-scl { + function = "alt5"; + pins = "gpio3"; + bias-disable; + }; + }; + i2c3_gpio4: i2c3_gpio4 { + pin-sda { + function = "alt5"; + pins = "gpio4"; + bias-pull-up; + }; + pin-scl { + function = "alt5"; + pins = "gpio5"; + bias-disable; + }; + }; + i2c4_gpio6: i2c4_gpio6 { + pin-sda { + function = "alt5"; + pins = "gpio6"; + bias-pull-up; + }; + pin-scl { + function = "alt5"; + pins = "gpio7"; + bias-disable; + }; + }; + i2c4_gpio8: i2c4_gpio8 { + pin-sda { + function = "alt5"; + pins = "gpio8"; + bias-pull-up; + }; + pin-scl { + function = "alt5"; + pins = "gpio9"; + bias-disable; + }; + }; + i2c5_gpio10: i2c5_gpio10 { + pin-sda { + function = "alt5"; + pins = "gpio10"; + bias-pull-up; + }; + pin-scl { + function = "alt5"; + pins = "gpio11"; + bias-disable; + }; + }; + i2c5_gpio12: i2c5_gpio12 { + pin-sda { + function = "alt5"; + pins = "gpio12"; + bias-pull-up; + }; + pin-scl { + function = "alt5"; + pins = "gpio13"; + bias-disable; + }; + }; + i2c6_gpio0: i2c6_gpio0 { + pin-sda { + function = "alt5"; + pins = "gpio0"; + bias-pull-up; + }; + pin-scl { + function = "alt5"; + pins = "gpio1"; + bias-disable; + }; + }; + i2c6_gpio22: i2c6_gpio22 { + pin-sda { + function = "alt5"; + pins = "gpio22"; + bias-pull-up; + }; + pin-scl { + function = "alt5"; + pins = "gpio23"; + bias-disable; + }; + }; + i2c_slave_gpio8: i2c_slave_gpio8 { + pins-i2c-slave { + pins = "gpio8", + "gpio9", + "gpio10", + "gpio11"; + function = "alt3"; + }; + }; + + jtag_gpio48: jtag_gpio48 { + pins-jtag { + pins = "gpio48", + "gpio49", + "gpio50", + "gpio51", + "gpio52", + "gpio53"; + function = "alt4"; + }; + }; + + mii_gpio28: mii_gpio28 { + pins-mii { + pins = "gpio28", + "gpio29", + "gpio30", + "gpio31"; + function = "alt4"; + }; + }; + mii_gpio36: mii_gpio36 { + pins-mii { + pins = "gpio36", + "gpio37", + "gpio38", + "gpio39"; + function = "alt5"; + }; + }; + + pcm_gpio50: pcm_gpio50 { + pins-pcm { + pins = "gpio50", + "gpio51", + "gpio52", + "gpio53"; + function = "alt2"; + }; + }; + + pwm0_0_gpio12: pwm0_0_gpio12 { + pin-pwm { + pins = "gpio12"; + function = "alt0"; + bias-disable; + }; + }; + pwm0_0_gpio18: pwm0_0_gpio18 { + pin-pwm { + pins = "gpio18"; + function = "alt5"; + bias-disable; + }; + }; + pwm1_0_gpio40: pwm1_0_gpio40 { + pin-pwm { + pins = "gpio40"; + function = "alt0"; + bias-disable; + }; + }; + pwm0_1_gpio13: pwm0_1_gpio13 { + pin-pwm { + pins = "gpio13"; + function = "alt0"; + bias-disable; + }; + }; + pwm0_1_gpio19: pwm0_1_gpio19 { + pin-pwm { + pins = "gpio19"; + function = "alt5"; + bias-disable; + }; + }; + pwm1_1_gpio41: pwm1_1_gpio41 { + pin-pwm { + pins = "gpio41"; + function = "alt0"; + bias-disable; + }; + }; + pwm0_1_gpio45: pwm0_1_gpio45 { + pin-pwm { + pins = "gpio45"; + function = "alt0"; + bias-disable; + }; + }; + pwm0_0_gpio52: pwm0_0_gpio52 { + pin-pwm { + pins = "gpio52"; + function = "alt1"; + bias-disable; + }; + }; + pwm0_1_gpio53: pwm0_1_gpio53 { + pin-pwm { + pins = "gpio53"; + function = "alt1"; + bias-disable; + }; + }; + + rgmii_gpio35: rgmii_gpio35 { + pin-start-stop { + pins = "gpio35"; + function = "alt4"; + }; + pin-rx-ok { + pins = "gpio36"; + function = "alt4"; + }; + }; + rgmii_irq_gpio34: rgmii_irq_gpio34 { + pin-irq { + pins = "gpio34"; + function = "alt5"; + }; + }; + rgmii_irq_gpio39: rgmii_irq_gpio39 { + pin-irq { + pins = "gpio39"; + function = "alt4"; + }; + }; + rgmii_mdio_gpio28: rgmii_mdio_gpio28 { + pins-mdio { + pins = "gpio28", + "gpio29"; + function = "alt5"; + }; + }; + rgmii_mdio_gpio37: rgmii_mdio_gpio37 { + pins-mdio { + pins = "gpio37", + "gpio38"; + function = "alt4"; + }; + }; + + spi0_gpio46: spi0_gpio46 { + pins-spi { + pins = "gpio46", + "gpio47", + "gpio48", + "gpio49"; + function = "alt2"; + }; + }; + spi2_gpio46: spi2_gpio46 { + pins-spi { + pins = "gpio46", + "gpio47", + "gpio48", + "gpio49", + "gpio50"; + function = "alt5"; + }; + }; + spi3_gpio0: spi3_gpio0 { + pins-spi { + pins = "gpio0", + "gpio1", + "gpio2", + "gpio3"; + function = "alt3"; + }; + }; + spi4_gpio4: spi4_gpio4 { + pins-spi { + pins = "gpio4", + "gpio5", + "gpio6", + "gpio7"; + function = "alt3"; + }; + }; + spi5_gpio12: spi5_gpio12 { + pins-spi { + pins = "gpio12", + "gpio13", + "gpio14", + "gpio15"; + function = "alt3"; + }; + }; + spi6_gpio18: spi6_gpio18 { + pins-spi { + pins = "gpio18", + "gpio19", + "gpio20", + "gpio21"; + function = "alt3"; + }; + }; + + uart2_gpio0: uart2_gpio0 { + pin-tx { + pins = "gpio0"; + function = "alt4"; + bias-disable; + }; + pin-rx { + pins = "gpio1"; + function = "alt4"; + bias-pull-up; + }; + }; + uart2_ctsrts_gpio2: uart2_ctsrts_gpio2 { + pin-cts { + pins = "gpio2"; + function = "alt4"; + bias-pull-up; + }; + pin-rts { + pins = "gpio3"; + function = "alt4"; + bias-disable; + }; + }; + uart3_gpio4: uart3_gpio4 { + pin-tx { + pins = "gpio4"; + function = "alt4"; + bias-disable; + }; + pin-rx { + pins = "gpio5"; + function = "alt4"; + bias-pull-up; + }; + }; + uart3_ctsrts_gpio6: uart3_ctsrts_gpio6 { + pin-cts { + pins = "gpio6"; + function = "alt4"; + bias-pull-up; + }; + pin-rts { + pins = "gpio7"; + function = "alt4"; + bias-disable; + }; + }; + uart4_gpio8: uart4_gpio8 { + pin-tx { + pins = "gpio8"; + function = "alt4"; + bias-disable; + }; + pin-rx { + pins = "gpio9"; + function = "alt4"; + bias-pull-up; + }; + }; + uart4_ctsrts_gpio10: uart4_ctsrts_gpio10 { + pin-cts { + pins = "gpio10"; + function = "alt4"; + bias-pull-up; + }; + pin-rts { + pins = "gpio11"; + function = "alt4"; + bias-disable; + }; + }; + uart5_gpio12: uart5_gpio12 { + pin-tx { + pins = "gpio12"; + function = "alt4"; + bias-disable; + }; + pin-rx { + pins = "gpio13"; + function = "alt4"; + bias-pull-up; + }; + }; + uart5_ctsrts_gpio14: uart5_ctsrts_gpio14 { + pin-cts { + pins = "gpio14"; + function = "alt4"; + bias-pull-up; + }; + pin-rts { + pins = "gpio15"; + function = "alt4"; + bias-disable; + }; + }; +}; + +&rmem { + #address-cells = <2>; +}; + +&cma { + /* + * arm64 reserves the CMA by default somewhere in ZONE_DMA32, + * that's not good enough for the BCM2711 as some devices can + * only address the lower 1G of memory (ZONE_DMA). + */ + alloc-ranges = <0x0 0x00000000 0x40000000>; +}; + +&i2c0 { + compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c"; + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; +}; + +&i2c1 { + compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c"; + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; +}; + +&mailbox { + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; +}; + +&sdhci { + interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; +}; + +&sdhost { + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; +}; + +&spi { + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; +}; + +&spi1 { + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; +}; + +&spi2 { + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; +}; + +&system_timer { + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; +}; + +&txp { + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; +}; + +&uart0 { + interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; +}; + +&uart1 { + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; +}; + +&usb { + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; +}; + +&vec { + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; +}; diff --git a/arch/arm/boot/dts/bcm2835-common.dtsi b/arch/arm/boot/dts/bcm2835-common.dtsi new file mode 100644 index 000000000000..2b1d9d4c0cde --- /dev/null +++ b/arch/arm/boot/dts/bcm2835-common.dtsi @@ -0,0 +1,200 @@ +// SPDX-License-Identifier: GPL-2.0 + +/* This include file covers the common peripherals and configuration between + * bcm2835, bcm2836 and bcm2837 implementations. + */ + +/ { + interrupt-parent = <&intc>; + + soc { + dma: dma@7e007000 { + compatible = "brcm,bcm2835-dma"; + reg = <0x7e007000 0xf00>; + interrupts = <1 16>, + <1 17>, + <1 18>, + <1 19>, + <1 20>, + <1 21>, + <1 22>, + <1 23>, + <1 24>, + <1 25>, + <1 26>, + /* dma channel 11-14 share one irq */ + <1 27>, + <1 27>, + <1 27>, + <1 27>, + /* unused shared irq for all channels */ + <1 28>; + interrupt-names = "dma0", + "dma1", + "dma2", + "dma3", + "dma4", + "dma5", + "dma6", + "dma7", + "dma8", + "dma9", + "dma10", + "dma11", + "dma12", + "dma13", + "dma14", + "dma-shared-all"; + #dma-cells = <1>; + brcm,dma-channel-mask = <0x7f35>; + }; + + intc: interrupt-controller@7e00b200 { + compatible = "brcm,bcm2835-armctrl-ic"; + reg = <0x7e00b200 0x200>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pm: watchdog@7e100000 { + compatible = "brcm,bcm2835-pm", "brcm,bcm2835-pm-wdt"; + #power-domain-cells = <1>; + #reset-cells = <1>; + reg = <0x7e100000 0x114>, + <0x7e00a000 0x24>; + clocks = <&clocks BCM2835_CLOCK_V3D>, + <&clocks BCM2835_CLOCK_PERI_IMAGE>, + <&clocks BCM2835_CLOCK_H264>, + <&clocks BCM2835_CLOCK_ISP>; + clock-names = "v3d", "peri_image", "h264", "isp"; + system-power-controller; + }; + + rng@7e104000 { + compatible = "brcm,bcm2835-rng"; + reg = <0x7e104000 0x10>; + interrupts = <2 29>; + }; + + pixelvalve@7e206000 { + compatible = "brcm,bcm2835-pixelvalve0"; + reg = <0x7e206000 0x100>; + interrupts = <2 13>; /* pwa0 */ + }; + + pixelvalve@7e207000 { + compatible = "brcm,bcm2835-pixelvalve1"; + reg = <0x7e207000 0x100>; + interrupts = <2 14>; /* pwa1 */ + }; + + thermal: thermal@7e212000 { + compatible = "brcm,bcm2835-thermal"; + reg = <0x7e212000 0x8>; + clocks = <&clocks BCM2835_CLOCK_TSENS>; + #thermal-sensor-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@7e805000 { + compatible = "brcm,bcm2835-i2c"; + reg = <0x7e805000 0x1000>; + interrupts = <2 21>; + clocks = <&clocks BCM2835_CLOCK_VPU>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + }; + + pixelvalve@7e807000 { + compatible = "brcm,bcm2835-pixelvalve2"; + reg = <0x7e807000 0x100>; + interrupts = <2 10>; /* pixelvalve */ + }; + + hdmi: hdmi@7e902000 { + compatible = "brcm,bcm2835-hdmi"; + reg = <0x7e902000 0x600>, + <0x7e808000 0x100>; + interrupts = <2 8>, <2 9>; + ddc = <&i2c2>; + clocks = <&clocks BCM2835_PLLH_PIX>, + <&clocks BCM2835_CLOCK_HSM>; + clock-names = "pixel", "hdmi"; + dmas = <&dma 17>; + dma-names = "audio-rx"; + status = "disabled"; + }; + + v3d: v3d@7ec00000 { + compatible = "brcm,bcm2835-v3d"; + reg = <0x7ec00000 0x1000>; + interrupts = <1 10>; + power-domains = <&pm BCM2835_POWER_DOMAIN_GRAFX_V3D>; + }; + + vc4: gpu { + compatible = "brcm,bcm2835-vc4"; + }; + }; +}; + +&cpu_thermal { + thermal-sensors = <&thermal>; +}; + +&gpio { + i2c_slave_gpio18: i2c_slave_gpio18 { + brcm,pins = <18 19 20 21>; + brcm,function = <BCM2835_FSEL_ALT3>; + }; + + jtag_gpio4: jtag_gpio4 { + brcm,pins = <4 5 6 12 13>; + brcm,function = <BCM2835_FSEL_ALT5>; + }; + + pwm0_gpio12: pwm0_gpio12 { + brcm,pins = <12>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; + pwm0_gpio18: pwm0_gpio18 { + brcm,pins = <18>; + brcm,function = <BCM2835_FSEL_ALT5>; + }; + pwm0_gpio40: pwm0_gpio40 { + brcm,pins = <40>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; + pwm1_gpio13: pwm1_gpio13 { + brcm,pins = <13>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; + pwm1_gpio19: pwm1_gpio19 { + brcm,pins = <19>; + brcm,function = <BCM2835_FSEL_ALT5>; + }; + pwm1_gpio41: pwm1_gpio41 { + brcm,pins = <41>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; + pwm1_gpio45: pwm1_gpio45 { + brcm,pins = <45>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; +}; + +&i2s { + dmas = <&dma 2>, <&dma 3>; + dma-names = "tx", "rx"; +}; + +&sdhost { + dmas = <&dma 13>; + dma-names = "rx-tx"; +}; + +&spi { + dmas = <&dma 6>, <&dma 7>; + dma-names = "tx", "rx"; +}; diff --git a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts index db8a6017f220..6c8ce39833bf 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts @@ -8,6 +8,11 @@ compatible = "raspberrypi,model-a-plus", "brcm,bcm2835"; model = "Raspberry Pi Model A+"; + memory@0 { + device_type = "memory"; + reg = <0 0x10000000>; + }; + leds { act { gpios = <&gpio 47 GPIO_ACTIVE_HIGH>; @@ -99,6 +104,8 @@ &hdmi { hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; + power-domains = <&power RPI_POWER_DOMAIN_HDMI>; + status = "okay"; }; &pwm { @@ -107,6 +114,13 @@ status = "okay"; }; +&sdhost { + pinctrl-names = "default"; + pinctrl-0 = <&sdhost_gpio48>; + bus-width = <4>; + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_gpio14>; diff --git a/arch/arm/boot/dts/bcm2835-rpi-a.dts b/arch/arm/boot/dts/bcm2835-rpi-a.dts index 067d1f07a2d3..17fdd48346ff 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-a.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-a.dts @@ -8,6 +8,11 @@ compatible = "raspberrypi,model-a", "brcm,bcm2835"; model = "Raspberry Pi Model A"; + memory@0 { + device_type = "memory"; + reg = <0 0x10000000>; + }; + leds { act { gpios = <&gpio 16 GPIO_ACTIVE_LOW>; @@ -94,6 +99,8 @@ &hdmi { hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>; + power-domains = <&power RPI_POWER_DOMAIN_HDMI>; + status = "okay"; }; &pwm { @@ -102,6 +109,13 @@ status = "okay"; }; +&sdhost { + pinctrl-names = "default"; + pinctrl-0 = <&sdhost_gpio48>; + bus-width = <4>; + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_gpio14>; diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts index 1e40d672b055..b0355c229cdc 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts @@ -9,6 +9,11 @@ compatible = "raspberrypi,model-b-plus", "brcm,bcm2835"; model = "Raspberry Pi Model B+"; + memory@0 { + device_type = "memory"; + reg = <0 0x20000000>; + }; + leds { act { gpios = <&gpio 47 GPIO_ACTIVE_HIGH>; @@ -101,6 +106,8 @@ &hdmi { hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; + power-domains = <&power RPI_POWER_DOMAIN_HDMI>; + status = "okay"; }; &pwm { @@ -109,6 +116,13 @@ status = "okay"; }; +&sdhost { + pinctrl-names = "default"; + pinctrl-0 = <&sdhost_gpio48>; + bus-width = <4>; + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_gpio14>; diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts index 28e7513ce617..33b3b5c02521 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts @@ -9,6 +9,11 @@ compatible = "raspberrypi,model-b-rev2", "brcm,bcm2835"; model = "Raspberry Pi Model B rev2"; + memory@0 { + device_type = "memory"; + reg = <0 0x10000000>; + }; + leds { act { gpios = <&gpio 16 GPIO_ACTIVE_LOW>; @@ -94,6 +99,8 @@ &hdmi { hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>; + power-domains = <&power RPI_POWER_DOMAIN_HDMI>; + status = "okay"; }; &pwm { @@ -102,6 +109,13 @@ status = "okay"; }; +&sdhost { + pinctrl-names = "default"; + pinctrl-0 = <&sdhost_gpio48>; + bus-width = <4>; + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_gpio14>; diff --git a/arch/arm/boot/dts/bcm2835-rpi-b.dts b/arch/arm/boot/dts/bcm2835-rpi-b.dts index 31ff602e2cd3..2b69957e0113 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-b.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts @@ -9,6 +9,11 @@ compatible = "raspberrypi,model-b", "brcm,bcm2835"; model = "Raspberry Pi Model B"; + memory@0 { + device_type = "memory"; + reg = <0 0x10000000>; + }; + leds { act { gpios = <&gpio 16 GPIO_ACTIVE_LOW>; @@ -89,6 +94,8 @@ &hdmi { hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>; + power-domains = <&power RPI_POWER_DOMAIN_HDMI>; + status = "okay"; }; &pwm { @@ -97,6 +104,13 @@ status = "okay"; }; +&sdhost { + pinctrl-names = "default"; + pinctrl-0 = <&sdhost_gpio48>; + bus-width = <4>; + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_gpio14>; diff --git a/arch/arm/boot/dts/bcm2835-rpi-cm1-io1.dts b/arch/arm/boot/dts/bcm2835-rpi-cm1-io1.dts index 4764a25585ab..a75c882e6575 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-cm1-io1.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-cm1-io1.dts @@ -79,6 +79,15 @@ &hdmi { hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; + power-domains = <&power RPI_POWER_DOMAIN_HDMI>; + status = "okay"; +}; + +&sdhost { + pinctrl-names = "default"; + pinctrl-0 = <&sdhost_gpio48>; + bus-width = <4>; + status = "okay"; }; &uart0 { diff --git a/arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi b/arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi index ef22c2da783a..58059c2ce129 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi +++ b/arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi @@ -10,6 +10,11 @@ }; }; + memory@0 { + device_type = "memory"; + reg = <0 0x20000000>; + }; + reg_3v3: fixed-regulator { compatible = "regulator-fixed"; regulator-name = "3V3"; diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts index ba0167df6c5f..b75af21069f9 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts @@ -12,6 +12,11 @@ compatible = "raspberrypi,model-zero-w", "brcm,bcm2835"; model = "Raspberry Pi Zero W"; + memory@0 { + device_type = "memory"; + reg = <0 0x20000000>; + }; + chosen { /* 8250 auxiliary UART instead of pl011 */ stdout-path = "serial1:115200n8"; @@ -100,12 +105,15 @@ &hdmi { hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; + power-domains = <&power RPI_POWER_DOMAIN_HDMI>; + status = "okay"; }; &sdhci { #address-cells = <1>; #size-cells = <0>; pinctrl-0 = <&emmc_gpio34 &gpclk2_gpio43>; + bus-width = <4>; mmc-pwrseq = <&wifi_pwrseq>; non-removable; status = "okay"; @@ -116,6 +124,13 @@ }; }; +&sdhost { + pinctrl-names = "default"; + pinctrl-0 = <&sdhost_gpio48>; + bus-width = <4>; + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_gpio32 &uart0_ctsrts_gpio30>; diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero.dts b/arch/arm/boot/dts/bcm2835-rpi-zero.dts index 3b35a8a4a55f..6dd93c6f4966 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-zero.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-zero.dts @@ -12,6 +12,11 @@ compatible = "raspberrypi,model-zero", "brcm,bcm2835"; model = "Raspberry Pi Zero"; + memory@0 { + device_type = "memory"; + reg = <0 0x20000000>; + }; + leds { act { gpios = <&gpio 47 GPIO_ACTIVE_HIGH>; @@ -96,6 +101,15 @@ &hdmi { hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; + power-domains = <&power RPI_POWER_DOMAIN_HDMI>; + status = "okay"; +}; + +&sdhost { + pinctrl-names = "default"; + pinctrl-0 = <&sdhost_gpio48>; + bus-width = <4>; + status = "okay"; }; &uart0 { diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi index 715d50c64529..394c8a71b13b 100644 --- a/arch/arm/boot/dts/bcm2835-rpi.dtsi +++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi @@ -1,11 +1,6 @@ #include <dt-bindings/power/raspberrypi-power.h> / { - memory@0 { - device_type = "memory"; - reg = <0 0x10000000>; - }; - leds { compatible = "gpio-leds"; @@ -64,32 +59,10 @@ clock-frequency = <100000>; }; -&i2c2 { - status = "okay"; -}; - -&sdhci { - pinctrl-names = "default"; - pinctrl-0 = <&emmc_gpio48>; - bus-width = <4>; -}; - -&sdhost { - pinctrl-names = "default"; - pinctrl-0 = <&sdhost_gpio48>; - status = "okay"; - bus-width = <4>; -}; - &usb { power-domains = <&power RPI_POWER_DOMAIN_USB>; }; -&hdmi { - power-domains = <&power RPI_POWER_DOMAIN_HDMI>; - status = "okay"; -}; - &vec { power-domains = <&power RPI_POWER_DOMAIN_VEC>; status = "okay"; diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi index a5c3824c8056..53bf4579cc22 100644 --- a/arch/arm/boot/dts/bcm2835.dtsi +++ b/arch/arm/boot/dts/bcm2835.dtsi @@ -1,5 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 #include "bcm283x.dtsi" +#include "bcm2835-common.dtsi" / { compatible = "brcm,bcm2835"; diff --git a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts index 7b4e651bafdd..0455a680394a 100644 --- a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts +++ b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts @@ -10,6 +10,7 @@ model = "Raspberry Pi 2 Model B"; memory@0 { + device_type = "memory"; reg = <0 0x40000000>; }; @@ -105,6 +106,8 @@ &hdmi { hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; + power-domains = <&power RPI_POWER_DOMAIN_HDMI>; + status = "okay"; }; &pwm { @@ -113,6 +116,13 @@ status = "okay"; }; +&sdhost { + pinctrl-names = "default"; + pinctrl-0 = <&sdhost_gpio48>; + bus-width = <4>; + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_gpio14>; diff --git a/arch/arm/boot/dts/bcm2836.dtsi b/arch/arm/boot/dts/bcm2836.dtsi index c933e8413884..82d6c4662ae4 100644 --- a/arch/arm/boot/dts/bcm2836.dtsi +++ b/arch/arm/boot/dts/bcm2836.dtsi @@ -1,5 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 #include "bcm283x.dtsi" +#include "bcm2835-common.dtsi" / { compatible = "brcm,bcm2836"; diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts b/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts index 7f4437a8eedb..66ab35eccba7 100644 --- a/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts +++ b/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts @@ -14,6 +14,7 @@ }; memory@0 { + device_type = "memory"; reg = <0 0x20000000>; }; @@ -117,6 +118,8 @@ &hdmi { hpd-gpios = <&gpio 28 GPIO_ACTIVE_LOW>; + power-domains = <&power RPI_POWER_DOMAIN_HDMI>; + status = "okay"; }; &pwm { diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts index c6fa34c24100..74ed6d047807 100644 --- a/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts +++ b/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts @@ -15,6 +15,7 @@ }; memory@0 { + device_type = "memory"; reg = <0 0x40000000>; }; @@ -124,6 +125,8 @@ &hdmi { hpd-gpios = <&gpio 28 GPIO_ACTIVE_LOW>; + power-domains = <&power RPI_POWER_DOMAIN_HDMI>; + status = "okay"; }; &pwm { diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts index ce71f578c51a..054ecaa355c9 100644 --- a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts +++ b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts @@ -15,6 +15,7 @@ }; memory@0 { + device_type = "memory"; reg = <0 0x40000000>; }; @@ -125,6 +126,8 @@ &hdmi { hpd-gpios = <&expgpio 4 GPIO_ACTIVE_LOW>; + power-domains = <&power RPI_POWER_DOMAIN_HDMI>; + status = "okay"; }; /* uart0 communicates with the BT module */ diff --git a/arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts b/arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts index 6c8233a36d86..588d9411ceb6 100644 --- a/arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts +++ b/arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts @@ -78,6 +78,15 @@ &hdmi { hpd-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>; + power-domains = <&power RPI_POWER_DOMAIN_HDMI>; + status = "okay"; +}; + +&sdhost { + pinctrl-names = "default"; + pinctrl-0 = <&sdhost_gpio48>; + bus-width = <4>; + status = "okay"; }; &uart0 { diff --git a/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi b/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi index 81399b2c5af9..925cb37c22f0 100644 --- a/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi +++ b/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi @@ -5,9 +5,18 @@ / { memory@0 { + device_type = "memory"; reg = <0 0x40000000>; }; + leds { + /* + * Since there is no upstream GPIO driver yet, + * remove the incomplete node. + */ + /delete-node/ act; + }; + reg_3v3: fixed-regulator { compatible = "regulator-fixed"; regulator-name = "3V3"; diff --git a/arch/arm/boot/dts/bcm2837.dtsi b/arch/arm/boot/dts/bcm2837.dtsi index beb6c502dadc..9e95fee78e19 100644 --- a/arch/arm/boot/dts/bcm2837.dtsi +++ b/arch/arm/boot/dts/bcm2837.dtsi @@ -1,4 +1,5 @@ #include "bcm283x.dtsi" +#include "bcm2835-common.dtsi" / { compatible = "brcm,bcm2837"; diff --git a/arch/arm/boot/dts/bcm283x-rpi-usb-peripheral.dtsi b/arch/arm/boot/dts/bcm283x-rpi-usb-peripheral.dtsi new file mode 100644 index 000000000000..0ff0e9e25327 --- /dev/null +++ b/arch/arm/boot/dts/bcm283x-rpi-usb-peripheral.dtsi @@ -0,0 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0 +&usb { + dr_mode = "peripheral"; + g-rx-fifo-size = <256>; + g-np-tx-fifo-size = <32>; + g-tx-fifo-size = <256 256 512 512 512 768 768>; +}; diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi index 4b21ddb26aa5..e1abe8c730ce 100644 --- a/arch/arm/boot/dts/bcm283x.dtsi +++ b/arch/arm/boot/dts/bcm283x.dtsi @@ -18,7 +18,6 @@ / { compatible = "brcm,bcm2835"; model = "BCM2835"; - interrupt-parent = <&intc>; #address-cells = <1>; #size-cells = <1>; @@ -31,16 +30,27 @@ stdout-path = "serial0:115200n8"; }; + rmem: reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + cma: linux,cma { + compatible = "shared-dma-pool"; + size = <0x4000000>; /* 64MB */ + reusable; + linux,cma-default; + }; + }; + thermal-zones { cpu_thermal: cpu-thermal { polling-delay-passive = <0>; polling-delay = <1000>; - thermal-sensors = <&thermal>; - trips { cpu-crit { - temperature = <80000>; + temperature = <90000>; hysteresis = <0>; type = "critical"; }; @@ -56,7 +66,7 @@ #address-cells = <1>; #size-cells = <1>; - timer@7e003000 { + system_timer: timer@7e003000 { compatible = "brcm,bcm2835-system-timer"; reg = <0x7e003000 0x1000>; interrupts = <1 0>, <1 1>, <1 2>, <1 3>; @@ -67,74 +77,12 @@ clock-frequency = <1000000>; }; - txp@7e004000 { + txp: txp@7e004000 { compatible = "brcm,bcm2835-txp"; reg = <0x7e004000 0x20>; interrupts = <1 11>; }; - dma: dma@7e007000 { - compatible = "brcm,bcm2835-dma"; - reg = <0x7e007000 0xf00>; - interrupts = <1 16>, - <1 17>, - <1 18>, - <1 19>, - <1 20>, - <1 21>, - <1 22>, - <1 23>, - <1 24>, - <1 25>, - <1 26>, - /* dma channel 11-14 share one irq */ - <1 27>, - <1 27>, - <1 27>, - <1 27>, - /* unused shared irq for all channels */ - <1 28>; - interrupt-names = "dma0", - "dma1", - "dma2", - "dma3", - "dma4", - "dma5", - "dma6", - "dma7", - "dma8", - "dma9", - "dma10", - "dma11", - "dma12", - "dma13", - "dma14", - "dma-shared-all"; - #dma-cells = <1>; - brcm,dma-channel-mask = <0x7f35>; - }; - - intc: interrupt-controller@7e00b200 { - compatible = "brcm,bcm2835-armctrl-ic"; - reg = <0x7e00b200 0x200>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - pm: watchdog@7e100000 { - compatible = "brcm,bcm2835-pm", "brcm,bcm2835-pm-wdt"; - #power-domain-cells = <1>; - #reset-cells = <1>; - reg = <0x7e100000 0x114>, - <0x7e00a000 0x24>; - clocks = <&clocks BCM2835_CLOCK_V3D>, - <&clocks BCM2835_CLOCK_PERI_IMAGE>, - <&clocks BCM2835_CLOCK_H264>, - <&clocks BCM2835_CLOCK_ISP>; - clock-names = "v3d", "peri_image", "h264", "isp"; - system-power-controller; - }; - clocks: cprman@7e101000 { compatible = "brcm,bcm2835-cprman"; #clock-cells = <1>; @@ -149,12 +97,6 @@ <&dsi1 0>, <&dsi1 1>, <&dsi1 2>; }; - rng@7e104000 { - compatible = "brcm,bcm2835-rng"; - reg = <0x7e104000 0x10>; - interrupts = <2 29>; - }; - mailbox: mailbox@7e00b880 { compatible = "brcm,bcm2835-mbox"; reg = <0x7e00b880 0x40>; @@ -184,8 +126,7 @@ interrupt-controller; #interrupt-cells = <2>; - /* Defines pin muxing groups according to - * BCM2835-ARM-Peripherals.pdf page 102. + /* Defines common pin muxing groups * * While each pin can have its mux selected * for various functions individually, some @@ -263,15 +204,7 @@ brcm,pins = <44 45>; brcm,function = <BCM2835_FSEL_ALT2>; }; - i2c_slave_gpio18: i2c_slave_gpio18 { - brcm,pins = <18 19 20 21>; - brcm,function = <BCM2835_FSEL_ALT3>; - }; - jtag_gpio4: jtag_gpio4 { - brcm,pins = <4 5 6 12 13>; - brcm,function = <BCM2835_FSEL_ALT5>; - }; jtag_gpio22: jtag_gpio22 { brcm,pins = <22 23 24 25 26 27>; brcm,function = <BCM2835_FSEL_ALT4>; @@ -286,35 +219,6 @@ brcm,function = <BCM2835_FSEL_ALT2>; }; - pwm0_gpio12: pwm0_gpio12 { - brcm,pins = <12>; - brcm,function = <BCM2835_FSEL_ALT0>; - }; - pwm0_gpio18: pwm0_gpio18 { - brcm,pins = <18>; - brcm,function = <BCM2835_FSEL_ALT5>; - }; - pwm0_gpio40: pwm0_gpio40 { - brcm,pins = <40>; - brcm,function = <BCM2835_FSEL_ALT0>; - }; - pwm1_gpio13: pwm1_gpio13 { - brcm,pins = <13>; - brcm,function = <BCM2835_FSEL_ALT0>; - }; - pwm1_gpio19: pwm1_gpio19 { - brcm,pins = <19>; - brcm,function = <BCM2835_FSEL_ALT5>; - }; - pwm1_gpio41: pwm1_gpio41 { - brcm,pins = <41>; - brcm,function = <BCM2835_FSEL_ALT0>; - }; - pwm1_gpio45: pwm1_gpio45 { - brcm,pins = <45>; - brcm,function = <BCM2835_FSEL_ALT0>; - }; - sdhost_gpio48: sdhost_gpio48 { brcm,pins = <48 49 50 51 52 53>; brcm,function = <BCM2835_FSEL_ALT0>; @@ -396,8 +300,8 @@ }; uart0: serial@7e201000 { - compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell"; - reg = <0x7e201000 0x1000>; + compatible = "arm,pl011", "arm,primecell"; + reg = <0x7e201000 0x200>; interrupts = <2 25>; clocks = <&clocks BCM2835_CLOCK_UART>, <&clocks BCM2835_CLOCK_VPU>; @@ -410,8 +314,6 @@ reg = <0x7e202000 0x100>; interrupts = <2 24>; clocks = <&clocks BCM2835_CLOCK_VPU>; - dmas = <&dma 13>; - dma-names = "rx-tx"; status = "disabled"; }; @@ -419,20 +321,14 @@ compatible = "brcm,bcm2835-i2s"; reg = <0x7e203000 0x24>; clocks = <&clocks BCM2835_CLOCK_PCM>; - - dmas = <&dma 2>, - <&dma 3>; - dma-names = "tx", "rx"; status = "disabled"; }; spi: spi@7e204000 { compatible = "brcm,bcm2835-spi"; - reg = <0x7e204000 0x1000>; + reg = <0x7e204000 0x200>; interrupts = <2 22>; clocks = <&clocks BCM2835_CLOCK_VPU>; - dmas = <&dma 6>, <&dma 7>; - dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -440,7 +336,7 @@ i2c0: i2c@7e205000 { compatible = "brcm,bcm2835-i2c"; - reg = <0x7e205000 0x1000>; + reg = <0x7e205000 0x200>; interrupts = <2 21>; clocks = <&clocks BCM2835_CLOCK_VPU>; #address-cells = <1>; @@ -448,18 +344,6 @@ status = "disabled"; }; - pixelvalve@7e206000 { - compatible = "brcm,bcm2835-pixelvalve0"; - reg = <0x7e206000 0x100>; - interrupts = <2 13>; /* pwa0 */ - }; - - pixelvalve@7e207000 { - compatible = "brcm,bcm2835-pixelvalve1"; - reg = <0x7e207000 0x100>; - interrupts = <2 14>; /* pwa1 */ - }; - dpi: dpi@7e208000 { compatible = "brcm,bcm2835-dpi"; reg = <0x7e208000 0x8c>; @@ -490,14 +374,6 @@ }; - thermal: thermal@7e212000 { - compatible = "brcm,bcm2835-thermal"; - reg = <0x7e212000 0x8>; - clocks = <&clocks BCM2835_CLOCK_TSENS>; - #thermal-sensor-cells = <0>; - status = "disabled"; - }; - aux: aux@7e215000 { compatible = "brcm,bcm2835-aux"; #clock-cells = <1>; @@ -587,16 +463,6 @@ status = "disabled"; }; - i2c2: i2c@7e805000 { - compatible = "brcm,bcm2835-i2c"; - reg = <0x7e805000 0x1000>; - interrupts = <2 21>; - clocks = <&clocks BCM2835_CLOCK_VPU>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - vec: vec@7e806000 { compatible = "brcm,bcm2835-vec"; reg = <0x7e806000 0x1000>; @@ -605,26 +471,6 @@ status = "disabled"; }; - pixelvalve@7e807000 { - compatible = "brcm,bcm2835-pixelvalve2"; - reg = <0x7e807000 0x100>; - interrupts = <2 10>; /* pixelvalve */ - }; - - hdmi: hdmi@7e902000 { - compatible = "brcm,bcm2835-hdmi"; - reg = <0x7e902000 0x600>, - <0x7e808000 0x100>; - interrupts = <2 8>, <2 9>; - ddc = <&i2c2>; - clocks = <&clocks BCM2835_PLLH_PIX>, - <&clocks BCM2835_CLOCK_HSM>; - clock-names = "pixel", "hdmi"; - dmas = <&dma 17>; - dma-names = "audio-rx"; - status = "disabled"; - }; - usb: usb@7e980000 { compatible = "brcm,bcm2835-usb"; reg = <0x7e980000 0x10000>; @@ -636,36 +482,19 @@ phys = <&usbphy>; phy-names = "usb2-phy"; }; - - v3d: v3d@7ec00000 { - compatible = "brcm,bcm2835-v3d"; - reg = <0x7ec00000 0x1000>; - interrupts = <1 10>; - power-domains = <&pm BCM2835_POWER_DOMAIN_GRAFX_V3D>; - }; - - vc4: gpu { - compatible = "brcm,bcm2835-vc4"; - }; }; clocks { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - /* The oscillator is the root of the clock tree. */ - clk_osc: clock@3 { + clk_osc: clk-osc { compatible = "fixed-clock"; - reg = <3>; #clock-cells = <0>; clock-output-names = "osc"; clock-frequency = <19200000>; }; - clk_usb: clock@4 { + clk_usb: clk-usb { compatible = "fixed-clock"; - reg = <4>; #clock-cells = <0>; clock-output-names = "otg"; clock-frequency = <480000000>; diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts new file mode 100644 index 000000000000..334325390aed --- /dev/null +++ b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts @@ -0,0 +1,53 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2019 Legrand AV Inc. + */ + +/dts-v1/; + +#include "bcm47094.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" + +/ { + compatible = "luxul,xwc-2000-v1", "brcm,bcm47094", "brcm,bcm4708"; + model = "Luxul XWC-2000 V1"; + + chosen { + bootargs = "earlycon"; + }; + + memory { + reg = <0x00000000 0x08000000 + 0x88000000 0x18000000>; + }; + + leds { + compatible = "gpio-leds"; + + status { + label = "bcm53xx:green:status"; + gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>; + linux,default-trigger = "timer"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&uart1 { + status = "okay"; +}; + +&spi_nor { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi index 372dc1eb88a0..2d9b4dd05830 100644 --- a/arch/arm/boot/dts/bcm5301x.dtsi +++ b/arch/arm/boot/dts/bcm5301x.dtsi @@ -353,8 +353,8 @@ mdio: mdio@18003000 { compatible = "brcm,iproc-mdio"; reg = <0x18003000 0x8>; - #size-cells = <1>; - #address-cells = <0>; + #size-cells = <0>; + #address-cells = <1>; }; mdio-bus-mux@18003000 { diff --git a/arch/arm/boot/dts/bcm958625hr.dts b/arch/arm/boot/dts/bcm958625hr.dts index a2c9de35ddfb..536fb24f38bb 100644 --- a/arch/arm/boot/dts/bcm958625hr.dts +++ b/arch/arm/boot/dts/bcm958625hr.dts @@ -55,18 +55,9 @@ priority = <200>; }; - /* Hardware I2C block cannot do more than 63 bytes per transfer, - * which would prevent reading from a SFP's EEPROM (256 byte). - */ - i2c1: i2c { - compatible = "i2c-gpio"; - sda-gpios = <&gpioa 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - scl-gpios = <&gpioa 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - }; - sfp: sfp { compatible = "sff,sfp"; - i2c-bus = <&i2c1>; + i2c-bus = <&i2c0>; mod-def0-gpios = <&gpioa 28 GPIO_ACTIVE_LOW>; los-gpios = <&gpioa 24 GPIO_ACTIVE_HIGH>; tx-fault-gpios = <&gpioa 30 GPIO_ACTIVE_HIGH>; @@ -74,6 +65,10 @@ }; }; +&i2c0 { + status = "okay"; +}; + &amac0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts index 5b2b1ed04d51..f2e7609e5346 100644 --- a/arch/arm/boot/dts/da850-evm.dts +++ b/arch/arm/boot/dts/da850-evm.dts @@ -281,7 +281,7 @@ flash: m25p80@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "m25p64"; + compatible = "jedec,spi-nor"; spi-max-frequency = <30000000>; m25p,fast-read; reg = <0>; diff --git a/arch/arm/boot/dts/dm3725.dtsi b/arch/arm/boot/dts/dm3725.dtsi new file mode 100644 index 000000000000..d24e906a14b1 --- /dev/null +++ b/arch/arm/boot/dts/dm3725.dtsi @@ -0,0 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2020 AndrĂ© Hentschel <nerv@dawncrow.de> + */ + +#include "omap36xx.dtsi" + +&sgx_module { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi index 2e8a3977219f..3081b04e8c08 100644 --- a/arch/arm/boot/dts/dove.dtsi +++ b/arch/arm/boot/dts/dove.dtsi @@ -784,7 +784,7 @@ status = "disabled"; }; - crypto_sram: sa-sram@ffffe000 { + crypto_sram: sram@ffffe000 { compatible = "mmio-sram"; reg = <0xffffe000 0x800>; clocks = <&gate_clk 15>; diff --git a/arch/arm/boot/dts/dra7-evm-common.dtsi b/arch/arm/boot/dts/dra7-evm-common.dtsi index 82eeba8faef1..23244b5a9942 100644 --- a/arch/arm/boot/dts/dra7-evm-common.dtsi +++ b/arch/arm/boot/dts/dra7-evm-common.dtsi @@ -4,7 +4,7 @@ */ #include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/clk/ti-dra7-atl.h> +#include <dt-bindings/clock/ti-dra7-atl.h> #include <dt-bindings/input/input.h> / { diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index 714e971b912a..de7f85efaa51 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -498,7 +498,7 @@ phy-supply = <&ldousb_reg>; }; -&gpio7 { +&gpio7_target { ti,no-reset-on-init; ti,no-idle-on-init; }; diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi index 23faedec08ab..fc418834890d 100644 --- a/arch/arm/boot/dts/dra7-l4.dtsi +++ b/arch/arm/boot/dts/dra7-l4.dtsi @@ -186,7 +186,6 @@ target-module@56000 { /* 0x4a056000, ap 9 02.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "dma_system"; reg = <0x56000 0x4>, <0x5602c 0x4>, <0x56028 0x4>; @@ -212,7 +211,7 @@ ranges = <0x0 0x56000 0x1000>; sdma: dma-controller@0 { - compatible = "ti,omap4430-sdma"; + compatible = "ti,omap4430-sdma", "ti,omap-sdma"; reg = <0x0 0x1000>; interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, @@ -234,7 +233,6 @@ target-module@80000 { /* 0x4a080000, ap 13 20.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "ocp2scp1"; reg = <0x80000 0x4>, <0x80010 0x4>, <0x80014 0x4>; @@ -302,7 +300,6 @@ target-module@90000 { /* 0x4a090000, ap 59 42.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "ocp2scp3"; reg = <0x90000 0x4>, <0x90010 0x4>, <0x90014 0x4>; @@ -394,7 +391,6 @@ target-module@d9000 { /* 0x4a0d9000, ap 17 72.0 */ compatible = "ti,sysc-omap4-sr", "ti,sysc"; - ti,hwmods = "smartreflex_mpu"; reg = <0xd9038 0x4>; reg-names = "sysc"; ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>; @@ -414,7 +410,6 @@ target-module@dd000 { /* 0x4a0dd000, ap 19 18.0 */ compatible = "ti,sysc-omap4-sr", "ti,sysc"; - ti,hwmods = "smartreflex_core"; reg = <0xdd038 0x4>; reg-names = "sysc"; ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>; @@ -442,7 +437,6 @@ target-module@f4000 { /* 0x4a0f4000, ap 23 04.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mailbox1"; reg = <0xf4000 0x4>, <0xf4010 0x4>; reg-names = "rev", "sysc"; @@ -472,7 +466,6 @@ target-module@f6000 { /* 0x4a0f6000, ap 25 78.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "spinlock"; reg = <0xf6000 0x4>, <0xf6010 0x4>, <0xf6014 0x4>; @@ -1118,7 +1111,6 @@ target-module@20000 { /* 0x48020000, ap 3 04.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "uart3"; reg = <0x20050 0x4>, <0x20054 0x4>, <0x20058 0x4>; @@ -1235,7 +1227,6 @@ target-module@3e000 { /* 0x4803e000, ap 11 56.0 */ compatible = "ti,sysc-omap4-timer", "ti,sysc"; - ti,hwmods = "timer9"; reg = <0x3e000 0x4>, <0x3e010 0x4>; reg-names = "rev", "sysc"; @@ -1261,9 +1252,8 @@ }; }; - target-module@51000 { /* 0x48051000, ap 45 2e.0 */ + gpio7_target: target-module@51000 { /* 0x48051000, ap 45 2e.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "gpio7"; reg = <0x51000 0x4>, <0x51010 0x4>, <0x51114 0x4>; @@ -1297,7 +1287,6 @@ target-module@53000 { /* 0x48053000, ap 35 36.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "gpio8"; reg = <0x53000 0x4>, <0x53010 0x4>, <0x53114 0x4>; @@ -1331,7 +1320,6 @@ target-module@55000 { /* 0x48055000, ap 13 0e.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "gpio2"; reg = <0x55000 0x4>, <0x55010 0x4>, <0x55114 0x4>; @@ -1365,7 +1353,6 @@ target-module@57000 { /* 0x48057000, ap 15 06.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "gpio3"; reg = <0x57000 0x4>, <0x57010 0x4>, <0x57114 0x4>; @@ -1399,7 +1386,6 @@ target-module@59000 { /* 0x48059000, ap 17 16.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "gpio4"; reg = <0x59000 0x4>, <0x59010 0x4>, <0x59114 0x4>; @@ -1433,7 +1419,6 @@ target-module@5b000 { /* 0x4805b000, ap 19 1e.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "gpio5"; reg = <0x5b000 0x4>, <0x5b010 0x4>, <0x5b114 0x4>; @@ -1467,7 +1452,6 @@ target-module@5d000 { /* 0x4805d000, ap 21 26.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "gpio6"; reg = <0x5d000 0x4>, <0x5d010 0x4>, <0x5d114 0x4>; @@ -1501,7 +1485,6 @@ target-module@60000 { /* 0x48060000, ap 23 32.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "i2c3"; reg = <0x60000 0x8>, <0x60010 0x8>, <0x60090 0x8>; @@ -1534,7 +1517,6 @@ target-module@66000 { /* 0x48066000, ap 63 14.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "uart5"; reg = <0x66050 0x4>, <0x66054 0x4>, <0x66058 0x4>; @@ -1567,7 +1549,6 @@ target-module@68000 { /* 0x48068000, ap 53 1c.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "uart6"; reg = <0x68050 0x4>, <0x68054 0x4>, <0x68058 0x4>; @@ -1600,7 +1581,6 @@ target-module@6a000 { /* 0x4806a000, ap 24 24.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "uart1"; reg = <0x6a050 0x4>, <0x6a054 0x4>, <0x6a058 0x4>; @@ -1633,7 +1613,6 @@ target-module@6c000 { /* 0x4806c000, ap 26 2c.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "uart2"; reg = <0x6c050 0x4>, <0x6c054 0x4>, <0x6c058 0x4>; @@ -1666,7 +1645,6 @@ target-module@6e000 { /* 0x4806e000, ap 28 0c.1 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "uart4"; reg = <0x6e050 0x4>, <0x6e054 0x4>, <0x6e058 0x4>; @@ -1699,7 +1677,6 @@ target-module@70000 { /* 0x48070000, ap 30 22.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "i2c1"; reg = <0x70000 0x8>, <0x70010 0x8>, <0x70090 0x8>; @@ -1732,7 +1709,6 @@ target-module@72000 { /* 0x48072000, ap 32 2a.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "i2c2"; reg = <0x72000 0x8>, <0x72010 0x8>, <0x72090 0x8>; @@ -1765,7 +1741,6 @@ target-module@78000 { /* 0x48078000, ap 39 0a.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "elm"; reg = <0x78000 0x4>, <0x78010 0x4>, <0x78014 0x4>; @@ -1795,7 +1770,6 @@ target-module@7a000 { /* 0x4807a000, ap 81 3a.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "i2c4"; reg = <0x7a000 0x8>, <0x7a010 0x8>, <0x7a090 0x8>; @@ -1828,7 +1802,6 @@ target-module@7c000 { /* 0x4807c000, ap 83 4a.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "i2c5"; reg = <0x7c000 0x8>, <0x7c010 0x8>, <0x7c090 0x8>; @@ -1861,7 +1834,6 @@ target-module@86000 { /* 0x48086000, ap 41 5e.0 */ compatible = "ti,sysc-omap4-timer", "ti,sysc"; - ti,hwmods = "timer10"; reg = <0x86000 0x4>, <0x86010 0x4>; reg-names = "rev", "sysc"; @@ -1889,7 +1861,6 @@ target-module@88000 { /* 0x48088000, ap 43 66.0 */ compatible = "ti,sysc-omap4-timer", "ti,sysc"; - ti,hwmods = "timer11"; reg = <0x88000 0x4>, <0x88010 0x4>; reg-names = "rev", "sysc"; @@ -1917,7 +1888,6 @@ target-module@90000 { /* 0x48090000, ap 55 12.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "rng"; reg = <0x91fe0 0x4>, <0x91fe4 0x4>; reg-names = "rev", "sysc"; @@ -1942,7 +1912,6 @@ target-module@98000 { /* 0x48098000, ap 47 08.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mcspi1"; reg = <0x98000 0x4>, <0x98010 0x4>; reg-names = "rev", "sysc"; @@ -1982,7 +1951,6 @@ target-module@9a000 { /* 0x4809a000, ap 49 10.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mcspi2"; reg = <0x9a000 0x4>, <0x9a010 0x4>; reg-names = "rev", "sysc"; @@ -2017,7 +1985,6 @@ target-module@9c000 { /* 0x4809c000, ap 51 38.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mmc1"; reg = <0x9c000 0x4>, <0x9c010 0x4>; reg-names = "rev", "sysc"; @@ -2067,6 +2034,37 @@ <0x00001000 0x000a5000 0x00001000>; }; + des_target: target-module@a5000 { /* 0x480a5000 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0xa5030 0x4>, + <0xa5034 0x4>, + <0xa5038 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): l4per_pwrdm, l4sec_clkdm */ + clocks = <&l4sec_clkctrl DRA7_L4SEC_DES_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xa5000 0x00001000>; + + des: des@0 { + compatible = "ti,omap4-des"; + reg = <0 0xa0>; + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma_xbar 117>, <&sdma_xbar 116>; + dma-names = "tx", "rx"; + clocks = <&l3_iclk_div>; + clock-names = "fck"; + }; + }; + target-module@a8000 { /* 0x480a8000, ap 59 1a.0 */ compatible = "ti,sysc"; status = "disabled"; @@ -2077,7 +2075,6 @@ target-module@ad000 { /* 0x480ad000, ap 61 20.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mmc3"; reg = <0xad000 0x4>, <0xad010 0x4>; reg-names = "rev", "sysc"; @@ -2112,7 +2109,6 @@ target-module@b2000 { /* 0x480b2000, ap 37 52.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "hdq1w"; reg = <0xb2000 0x4>, <0xb2014 0x4>, <0xb2018 0x4>; @@ -2137,7 +2133,6 @@ target-module@b4000 { /* 0x480b4000, ap 65 40.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mmc2"; reg = <0xb4000 0x4>, <0xb4010 0x4>; reg-names = "rev", "sysc"; @@ -2174,7 +2169,6 @@ target-module@b8000 { /* 0x480b8000, ap 67 48.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mcspi3"; reg = <0xb8000 0x4>, <0xb8010 0x4>; reg-names = "rev", "sysc"; @@ -2206,7 +2200,6 @@ target-module@ba000 { /* 0x480ba000, ap 69 18.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mcspi4"; reg = <0xba000 0x4>, <0xba010 0x4>; reg-names = "rev", "sysc"; @@ -2238,7 +2231,6 @@ target-module@d1000 { /* 0x480d1000, ap 71 28.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mmc4"; reg = <0xd1000 0x4>, <0xd1010 0x4>; reg-names = "rev", "sysc"; @@ -2384,7 +2376,6 @@ target-module@20000 { /* 0x48420000, ap 47 02.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "uart7"; reg = <0x20050 0x4>, <0x20054 0x4>, <0x20058 0x4>; @@ -2415,7 +2406,6 @@ target-module@22000 { /* 0x48422000, ap 49 0a.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "uart8"; reg = <0x22050 0x4>, <0x22054 0x4>, <0x22058 0x4>; @@ -2446,7 +2436,6 @@ target-module@24000 { /* 0x48424000, ap 51 12.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "uart9"; reg = <0x24050 0x4>, <0x24054 0x4>, <0x24058 0x4>; @@ -2522,7 +2511,6 @@ target-module@3e000 { /* 0x4843e000, ap 25 30.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "epwmss0"; reg = <0x3e000 0x4>, <0x3e004 0x4>; reg-names = "rev", "sysc"; @@ -2569,7 +2557,6 @@ target-module@40000 { /* 0x48440000, ap 27 38.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "epwmss1"; reg = <0x40000 0x4>, <0x40004 0x4>; reg-names = "rev", "sysc"; @@ -2616,7 +2603,6 @@ target-module@42000 { /* 0x48442000, ap 29 20.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "epwmss2"; reg = <0x42000 0x4>, <0x42004 0x4>; reg-names = "rev", "sysc"; @@ -2735,7 +2721,6 @@ target-module@60000 { /* 0x48460000, ap 9 0e.0 */ compatible = "ti,sysc-dra7-mcasp", "ti,sysc"; - ti,hwmods = "mcasp1"; reg = <0x60000 0x4>, <0x60004 0x4>; reg-names = "rev", "sysc"; @@ -2762,7 +2747,7 @@ interrupt-names = "tx", "rx"; dmas = <&edma_xbar 129 1>, <&edma_xbar 128 1>; dma-names = "tx", "rx"; - clocks = <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 22>, + clocks = <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 0>, <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 24>, <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 28>; clock-names = "fck", "ahclkx", "ahclkr"; @@ -2772,7 +2757,6 @@ target-module@64000 { /* 0x48464000, ap 11 1e.0 */ compatible = "ti,sysc-dra7-mcasp", "ti,sysc"; - ti,hwmods = "mcasp2"; reg = <0x64000 0x4>, <0x64004 0x4>; reg-names = "rev", "sysc"; @@ -2799,8 +2783,8 @@ interrupt-names = "tx", "rx"; dmas = <&edma_xbar 131 1>, <&edma_xbar 130 1>; dma-names = "tx", "rx"; - clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP2_CLKCTRL 22>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP2_CLKCTRL 24>, + clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP2_CLKCTRL 0>, + <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 24>, <&l4per2_clkctrl DRA7_L4PER2_MCASP2_CLKCTRL 28>; clock-names = "fck", "ahclkx", "ahclkr"; status = "disabled"; @@ -2809,7 +2793,6 @@ target-module@68000 { /* 0x48468000, ap 13 26.0 */ compatible = "ti,sysc-dra7-mcasp", "ti,sysc"; - ti,hwmods = "mcasp3"; reg = <0x68000 0x4>, <0x68004 0x4>; reg-names = "rev", "sysc"; @@ -2818,9 +2801,8 @@ <SYSC_IDLE_SMART>; /* Domains (P, C): l4per_pwrdm, l4per2_clkdm */ clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 0>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 28>; - clock-names = "fck", "ahclkx", "ahclkr"; + <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>; + clock-names = "fck", "ahclkx"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x68000 0x2000>, @@ -2836,7 +2818,7 @@ interrupt-names = "tx", "rx"; dmas = <&edma_xbar 133 1>, <&edma_xbar 132 1>; dma-names = "tx", "rx"; - clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 22>, + clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 0>, <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>; clock-names = "fck", "ahclkx"; status = "disabled"; @@ -2845,7 +2827,6 @@ target-module@6c000 { /* 0x4846c000, ap 15 2e.0 */ compatible = "ti,sysc-dra7-mcasp", "ti,sysc"; - ti,hwmods = "mcasp4"; reg = <0x6c000 0x4>, <0x6c004 0x4>; reg-names = "rev", "sysc"; @@ -2854,9 +2835,8 @@ <SYSC_IDLE_SMART>; /* Domains (P, C): l4per_pwrdm, l4per2_clkdm */ clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 0>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 24>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 28>; - clock-names = "fck", "ahclkx", "ahclkr"; + <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 24>; + clock-names = "fck", "ahclkx"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x6c000 0x2000>, @@ -2872,7 +2852,7 @@ interrupt-names = "tx", "rx"; dmas = <&edma_xbar 135 1>, <&edma_xbar 134 1>; dma-names = "tx", "rx"; - clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 22>, + clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 0>, <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 24>; clock-names = "fck", "ahclkx"; status = "disabled"; @@ -2881,7 +2861,6 @@ target-module@70000 { /* 0x48470000, ap 19 36.0 */ compatible = "ti,sysc-dra7-mcasp", "ti,sysc"; - ti,hwmods = "mcasp5"; reg = <0x70000 0x4>, <0x70004 0x4>; reg-names = "rev", "sysc"; @@ -2890,9 +2869,8 @@ <SYSC_IDLE_SMART>; /* Domains (P, C): l4per_pwrdm, l4per2_clkdm */ clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 0>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 24>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 28>; - clock-names = "fck", "ahclkx", "ahclkr"; + <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 24>; + clock-names = "fck", "ahclkx"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x70000 0x2000>, @@ -2908,7 +2886,7 @@ interrupt-names = "tx", "rx"; dmas = <&edma_xbar 137 1>, <&edma_xbar 136 1>; dma-names = "tx", "rx"; - clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 22>, + clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 0>, <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 24>; clock-names = "fck", "ahclkx"; status = "disabled"; @@ -2917,7 +2895,6 @@ target-module@74000 { /* 0x48474000, ap 35 14.0 */ compatible = "ti,sysc-dra7-mcasp", "ti,sysc"; - ti,hwmods = "mcasp6"; reg = <0x74000 0x4>, <0x74004 0x4>; reg-names = "rev", "sysc"; @@ -2926,9 +2903,8 @@ <SYSC_IDLE_SMART>; /* Domains (P, C): l4per_pwrdm, l4per2_clkdm */ clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 0>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 24>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 28>; - clock-names = "fck", "ahclkx", "ahclkr"; + <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 24>; + clock-names = "fck", "ahclkx"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x74000 0x2000>, @@ -2944,7 +2920,7 @@ interrupt-names = "tx", "rx"; dmas = <&edma_xbar 139 1>, <&edma_xbar 138 1>; dma-names = "tx", "rx"; - clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 22>, + clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 0>, <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 24>; clock-names = "fck", "ahclkx"; status = "disabled"; @@ -2953,7 +2929,6 @@ target-module@78000 { /* 0x48478000, ap 39 0c.0 */ compatible = "ti,sysc-dra7-mcasp", "ti,sysc"; - ti,hwmods = "mcasp7"; reg = <0x78000 0x4>, <0x78004 0x4>; reg-names = "rev", "sysc"; @@ -2962,9 +2937,8 @@ <SYSC_IDLE_SMART>; /* Domains (P, C): l4per_pwrdm, l4per2_clkdm */ clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 0>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 24>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 28>; - clock-names = "fck", "ahclkx", "ahclkr"; + <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 24>; + clock-names = "fck", "ahclkx"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x78000 0x2000>, @@ -2980,7 +2954,7 @@ interrupt-names = "tx", "rx"; dmas = <&edma_xbar 141 1>, <&edma_xbar 140 1>; dma-names = "tx", "rx"; - clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 22>, + clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 0>, <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 24>; clock-names = "fck", "ahclkx"; status = "disabled"; @@ -2989,7 +2963,6 @@ target-module@7c000 { /* 0x4847c000, ap 43 04.0 */ compatible = "ti,sysc-dra7-mcasp", "ti,sysc"; - ti,hwmods = "mcasp8"; reg = <0x7c000 0x4>, <0x7c004 0x4>; reg-names = "rev", "sysc"; @@ -2998,9 +2971,8 @@ <SYSC_IDLE_SMART>; /* Domains (P, C): l4per_pwrdm, l4per2_clkdm */ clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 0>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 24>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 28>; - clock-names = "fck", "ahclkx", "ahclkr"; + <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 24>; + clock-names = "fck", "ahclkx"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x7c000 0x2000>, @@ -3016,7 +2988,7 @@ interrupt-names = "tx", "rx"; dmas = <&edma_xbar 143 1>, <&edma_xbar 142 1>; dma-names = "tx", "rx"; - clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 22>, + clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 0>, <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 24>; clock-names = "fck", "ahclkx"; status = "disabled"; @@ -3025,7 +2997,7 @@ target-module@80000 { /* 0x48480000, ap 31 16.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - reg = <0x80000 0x4>; + reg = <0x80020 0x4>; reg-names = "rev"; clocks = <&l4per2_clkctrl DRA7_L4PER2_DCAN2_CLKCTRL 0>; clock-names = "fck"; @@ -3045,7 +3017,6 @@ target-module@84000 { /* 0x48484000, ap 3 10.0 */ compatible = "ti,sysc-omap4-simple", "ti,sysc"; - ti,hwmods = "gmac"; reg = <0x85200 0x4>, <0x85208 0x4>, <0x85204 0x4>; @@ -3103,9 +3074,10 @@ davinci_mdio: mdio@1000 { compatible = "ti,cpsw-mdio","ti,davinci_mdio"; + clocks = <&gmac_main_clk>; + clock-names = "fck"; #address-cells = <1>; #size-cells = <0>; - ti,hwmods = "davinci_mdio"; bus_freq = <1000000>; reg = <0x1000 0x100>; }; @@ -3122,6 +3094,58 @@ phys = <&phy_gmii_sel 2>; }; }; + + mac_sw: switch@0 { + compatible = "ti,dra7-cpsw-switch","ti,cpsw-switch"; + reg = <0x0 0x4000>; + ranges = <0 0 0x4000>; + clocks = <&gmac_main_clk>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + syscon = <&scm_conf>; + status = "disabled"; + + interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "rx_thresh", "rx", "tx", "misc"; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + cpsw_port1: port@1 { + reg = <1>; + label = "port1"; + mac-address = [ 00 00 00 00 00 00 ]; + phys = <&phy_gmii_sel 1>; + }; + + cpsw_port2: port@2 { + reg = <2>; + label = "port2"; + mac-address = [ 00 00 00 00 00 00 ]; + phys = <&phy_gmii_sel 2>; + }; + }; + + davinci_mdio_sw: mdio@1000 { + compatible = "ti,cpsw-mdio","ti,davinci_mdio"; + clocks = <&gmac_main_clk>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <0>; + bus_freq = <1000000>; + reg = <0x1000 0x100>; + }; + + cpts { + clocks = <&gmac_clkctrl DRA7_GMAC_GMAC_CLKCTRL 25>; + clock-names = "cpts"; + }; + }; }; }; }; @@ -3242,7 +3266,6 @@ target-module@2000 { /* 0x48802000, ap 95 7c.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mailbox13"; reg = <0x2000 0x4>, <0x2010 0x4>; reg-names = "rev", "sysc"; @@ -3321,7 +3344,6 @@ target-module@20000 { /* 0x48820000, ap 5 08.0 */ compatible = "ti,sysc-omap4-timer", "ti,sysc"; - ti,hwmods = "timer5"; reg = <0x20000 0x4>, <0x20010 0x4>; reg-names = "rev", "sysc"; @@ -3349,7 +3371,6 @@ target-module@22000 { /* 0x48822000, ap 7 24.0 */ compatible = "ti,sysc-omap4-timer", "ti,sysc"; - ti,hwmods = "timer6"; reg = <0x22000 0x4>, <0x22010 0x4>; reg-names = "rev", "sysc"; @@ -3377,7 +3398,6 @@ target-module@24000 { /* 0x48824000, ap 9 26.0 */ compatible = "ti,sysc-omap4-timer", "ti,sysc"; - ti,hwmods = "timer7"; reg = <0x24000 0x4>, <0x24010 0x4>; reg-names = "rev", "sysc"; @@ -3405,7 +3425,6 @@ target-module@26000 { /* 0x48826000, ap 11 0c.0 */ compatible = "ti,sysc-omap4-timer", "ti,sysc"; - ti,hwmods = "timer8"; reg = <0x26000 0x4>, <0x26010 0x4>; reg-names = "rev", "sysc"; @@ -3433,7 +3452,6 @@ target-module@28000 { /* 0x48828000, ap 13 16.0 */ compatible = "ti,sysc-omap4-timer", "ti,sysc"; - ti,hwmods = "timer13"; reg = <0x28000 0x4>, <0x28010 0x4>; reg-names = "rev", "sysc"; @@ -3461,7 +3479,6 @@ target-module@2a000 { /* 0x4882a000, ap 15 10.0 */ compatible = "ti,sysc-omap4-timer", "ti,sysc"; - ti,hwmods = "timer14"; reg = <0x2a000 0x4>, <0x2a010 0x4>; reg-names = "rev", "sysc"; @@ -3489,7 +3506,6 @@ target-module@2c000 { /* 0x4882c000, ap 17 02.0 */ compatible = "ti,sysc-omap4-timer", "ti,sysc"; - ti,hwmods = "timer15"; reg = <0x2c000 0x4>, <0x2c010 0x4>; reg-names = "rev", "sysc"; @@ -3517,7 +3533,6 @@ target-module@2e000 { /* 0x4882e000, ap 19 14.0 */ compatible = "ti,sysc-omap4-timer", "ti,sysc"; - ti,hwmods = "timer16"; reg = <0x2e000 0x4>, <0x2e010 0x4>; reg-names = "rev", "sysc"; @@ -3571,7 +3586,6 @@ target-module@3a000 { /* 0x4883a000, ap 33 3e.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mailbox2"; reg = <0x3a000 0x4>, <0x3a010 0x4>; reg-names = "rev", "sysc"; @@ -3602,7 +3616,6 @@ target-module@3c000 { /* 0x4883c000, ap 35 3a.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mailbox3"; reg = <0x3c000 0x4>, <0x3c010 0x4>; reg-names = "rev", "sysc"; @@ -3633,7 +3646,6 @@ target-module@3e000 { /* 0x4883e000, ap 37 46.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mailbox4"; reg = <0x3e000 0x4>, <0x3e010 0x4>; reg-names = "rev", "sysc"; @@ -3664,7 +3676,6 @@ target-module@40000 { /* 0x48840000, ap 39 64.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mailbox5"; reg = <0x40000 0x4>, <0x40010 0x4>; reg-names = "rev", "sysc"; @@ -3695,7 +3706,6 @@ target-module@42000 { /* 0x48842000, ap 41 4e.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mailbox6"; reg = <0x42000 0x4>, <0x42010 0x4>; reg-names = "rev", "sysc"; @@ -3726,7 +3736,6 @@ target-module@44000 { /* 0x48844000, ap 43 42.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mailbox7"; reg = <0x44000 0x4>, <0x44010 0x4>; reg-names = "rev", "sysc"; @@ -3757,7 +3766,6 @@ target-module@46000 { /* 0x48846000, ap 45 48.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mailbox8"; reg = <0x46000 0x4>, <0x46010 0x4>; reg-names = "rev", "sysc"; @@ -3876,7 +3884,6 @@ target-module@5e000 { /* 0x4885e000, ap 69 6c.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mailbox9"; reg = <0x5e000 0x4>, <0x5e010 0x4>; reg-names = "rev", "sysc"; @@ -3907,7 +3914,6 @@ target-module@60000 { /* 0x48860000, ap 71 4a.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mailbox10"; reg = <0x60000 0x4>, <0x60010 0x4>; reg-names = "rev", "sysc"; @@ -3938,7 +3944,6 @@ target-module@62000 { /* 0x48862000, ap 73 74.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mailbox11"; reg = <0x62000 0x4>, <0x62010 0x4>; reg-names = "rev", "sysc"; @@ -3969,7 +3974,6 @@ target-module@64000 { /* 0x48864000, ap 67 52.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mailbox12"; reg = <0x64000 0x4>, <0x64010 0x4>; reg-names = "rev", "sysc"; @@ -4172,35 +4176,88 @@ }; target-module@170000 { /* 0x48970000, ap 21 0a.0 */ - compatible = "ti,sysc"; - status = "disabled"; + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x170010 0x4>; + reg-names = "sysc"; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + clocks = <&cam_clkctrl DRA7_CAM_VIP1_CLKCTRL 0>; + clock-names = "fck"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x170000 0x10000>; + status = "disabled"; }; target-module@190000 { /* 0x48990000, ap 23 2e.0 */ - compatible = "ti,sysc"; - status = "disabled"; + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x190010 0x4>; + reg-names = "sysc"; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + clocks = <&cam_clkctrl DRA7_CAM_VIP2_CLKCTRL 0>; + clock-names = "fck"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x190000 0x10000>; + status = "disabled"; }; target-module@1b0000 { /* 0x489b0000, ap 25 34.0 */ - compatible = "ti,sysc"; - status = "disabled"; + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x1b0000 0x4>, + <0x1b0010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + clocks = <&cam_clkctrl DRA7_CAM_VIP3_CLKCTRL 0>; + clock-names = "fck"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x1b0000 0x10000>; + status = "disabled"; }; - target-module@1d0000 { /* 0x489d0000, ap 27 30.0 */ - compatible = "ti,sysc"; - status = "disabled"; + target-module@1d0010 { /* 0x489d0000, ap 27 30.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x1d0010 0x4>; + reg-names = "sysc"; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + clocks = <&vpe_clkctrl DRA7_VPE_VPE_CLKCTRL 0>; + clock-names = "fck"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x1d0000 0x10000>; + + vpe: vpe@0 { + compatible = "ti,dra7-vpe"; + reg = <0x0000 0x120>, + <0x0700 0x80>, + <0x5700 0x18>, + <0xd000 0x400>; + reg-names = "vpe_top", + "sc", + "csc", + "vpdma"; + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + }; }; }; }; @@ -4311,7 +4368,6 @@ target-module@0 { /* 0x4ae10000, ap 5 20.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "gpio1"; reg = <0x0 0x4>, <0x10 0x4>, <0x114 0x4>; @@ -4345,7 +4401,6 @@ target-module@4000 { /* 0x4ae14000, ap 7 28.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "wd_timer2"; reg = <0x4000 0x4>, <0x4010 0x4>, <0x4014 0x4>; @@ -4430,7 +4485,6 @@ target-module@0 { /* 0x4ae20000, ap 19 08.0 */ compatible = "ti,sysc-omap4-timer", "ti,sysc"; - ti,hwmods = "timer12"; reg = <0x0 0x4>, <0x10 0x4>; reg-names = "rev", "sysc"; @@ -4479,7 +4533,6 @@ target-module@b000 { /* 0x4ae2b000, ap 28 02.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "uart10"; reg = <0xb050 0x4>, <0xb054 0x4>, <0xb058 0x4>; @@ -4577,7 +4630,7 @@ target-module@c000 { /* 0x4ae3c000, ap 30 04.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - reg = <0xc000 0x4>; + reg = <0xc020 0x4>; reg-names = "rev"; clocks = <&wkupaon_clkctrl DRA7_WKUPAON_DCAN1_CLKCTRL 0>; clock-names = "fck"; diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 953f0ffce2a9..d78b684e7fca 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -377,44 +377,120 @@ ti,hwmods = "dmm"; }; - mmu0_dsp1: mmu@40d01000 { - compatible = "ti,dra7-dsp-iommu"; - reg = <0x40d01000 0x100>; - interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "mmu0_dsp1"; - #iommu-cells = <0>; - ti,syscon-mmuconfig = <&dsp1_system 0x0>; - status = "disabled"; + target-module@40d01000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x40d01000 0x4>, + <0x40d01010 0x4>, + <0x40d01014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + clocks = <&dsp1_clkctrl DRA7_DSP1_MMU0_DSP1_CLKCTRL 0>; + clock-names = "fck"; + resets = <&prm_dsp1 1>; + reset-names = "rstctrl"; + ranges = <0x0 0x40d01000 0x1000>; + #size-cells = <1>; + #address-cells = <1>; + + mmu0_dsp1: mmu@0 { + compatible = "ti,dra7-dsp-iommu"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <0>; + ti,syscon-mmuconfig = <&dsp1_system 0x0>; + }; }; - mmu1_dsp1: mmu@40d02000 { - compatible = "ti,dra7-dsp-iommu"; - reg = <0x40d02000 0x100>; - interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "mmu1_dsp1"; - #iommu-cells = <0>; - ti,syscon-mmuconfig = <&dsp1_system 0x1>; - status = "disabled"; + target-module@40d02000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x40d02000 0x4>, + <0x40d02010 0x4>, + <0x40d02014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + clocks = <&dsp1_clkctrl DRA7_DSP1_MMU0_DSP1_CLKCTRL 0>; + clock-names = "fck"; + resets = <&prm_dsp1 1>; + reset-names = "rstctrl"; + ranges = <0x0 0x40d02000 0x1000>; + #size-cells = <1>; + #address-cells = <1>; + + mmu1_dsp1: mmu@0 { + compatible = "ti,dra7-dsp-iommu"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <0>; + ti,syscon-mmuconfig = <&dsp1_system 0x1>; + }; }; - mmu_ipu1: mmu@58882000 { - compatible = "ti,dra7-iommu"; - reg = <0x58882000 0x100>; - interrupts = <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "mmu_ipu1"; - #iommu-cells = <0>; - ti,iommu-bus-err-back; - status = "disabled"; + target-module@58882000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x58882000 0x4>, + <0x58882010 0x4>, + <0x58882014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + clocks = <&ipu1_clkctrl DRA7_IPU1_MMU_IPU1_CLKCTRL 0>; + clock-names = "fck"; + resets = <&prm_ipu 2>; + reset-names = "rstctrl"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x58882000 0x100>; + + mmu_ipu1: mmu@0 { + compatible = "ti,dra7-iommu"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <0>; + ti,iommu-bus-err-back; + }; }; - mmu_ipu2: mmu@55082000 { - compatible = "ti,dra7-iommu"; - reg = <0x55082000 0x100>; - interrupts = <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "mmu_ipu2"; - #iommu-cells = <0>; - ti,iommu-bus-err-back; - status = "disabled"; + target-module@55082000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x55082000 0x4>, + <0x55082010 0x4>, + <0x55082014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + clocks = <&ipu2_clkctrl DRA7_IPU2_MMU_IPU2_CLKCTRL 0>; + clock-names = "fck"; + resets = <&prm_core 2>; + reset-names = "rstctrl"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x55082000 0x100>; + + mmu_ipu2: mmu@0 { + compatible = "ti,dra7-iommu"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <0>; + ti,iommu-bus-err-back; + }; }; abb_mpu: regulator-abb-mpu { @@ -597,6 +673,24 @@ status = "disabled"; }; + target-module@56000000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x5600fe00 0x4>, + <0x5600fe10 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + clocks = <&gpu_clkctrl DRA7_GPU_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x56000000 0x2000000>; + }; + crossbar_mpu: crossbar@4a002a48 { compatible = "ti,irq-crossbar"; reg = <0x4a002a48 0x130>; @@ -652,48 +746,96 @@ }; }; - aes1: aes@4b500000 { - compatible = "ti,omap4-aes"; - ti,hwmods = "aes1"; - reg = <0x4b500000 0xa0>; - interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&edma_xbar 111 0>, <&edma_xbar 110 0>; - dma-names = "tx", "rx"; - clocks = <&l3_iclk_div>; - clock-names = "fck"; - }; - - aes2: aes@4b700000 { - compatible = "ti,omap4-aes"; - ti,hwmods = "aes2"; - reg = <0x4b700000 0xa0>; - interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&edma_xbar 114 0>, <&edma_xbar 113 0>; - dma-names = "tx", "rx"; - clocks = <&l3_iclk_div>; + aes1_target: target-module@4b500000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x4b500080 0x4>, + <0x4b500084 0x4>, + <0x4b500088 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): per_pwrdm, l4sec_clkdm */ + clocks = <&l4sec_clkctrl DRA7_L4SEC_AES1_CLKCTRL 0>; clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4b500000 0x1000>; + + aes1: aes@0 { + compatible = "ti,omap4-aes"; + reg = <0 0xa0>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&edma_xbar 111 0>, <&edma_xbar 110 0>; + dma-names = "tx", "rx"; + clocks = <&l3_iclk_div>; + clock-names = "fck"; + }; }; - des: des@480a5000 { - compatible = "ti,omap4-des"; - ti,hwmods = "des"; - reg = <0x480a5000 0xa0>; - interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&sdma_xbar 117>, <&sdma_xbar 116>; - dma-names = "tx", "rx"; - clocks = <&l3_iclk_div>; + aes2_target: target-module@4b700000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x4b700080 0x4>, + <0x4b700084 0x4>, + <0x4b700088 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): per_pwrdm, l4sec_clkdm */ + clocks = <&l4sec_clkctrl DRA7_L4SEC_AES2_CLKCTRL 0>; clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4b700000 0x1000>; + + aes2: aes@0 { + compatible = "ti,omap4-aes"; + reg = <0 0xa0>; + interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&edma_xbar 114 0>, <&edma_xbar 113 0>; + dma-names = "tx", "rx"; + clocks = <&l3_iclk_div>; + clock-names = "fck"; + }; }; - sham: sham@53100000 { - compatible = "ti,omap5-sham"; - ti,hwmods = "sham"; - reg = <0x4b101000 0x300>; - interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&edma_xbar 119 0>; - dma-names = "rx"; - clocks = <&l3_iclk_div>; + sham_target: target-module@4b101000 { + compatible = "ti,sysc-omap3-sham", "ti,sysc"; + reg = <0x4b101100 0x4>, + <0x4b101110 0x4>, + <0x4b101114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (P, C): l4per_pwrdm, l4sec_clkdm */ + clocks = <&l4sec_clkctrl DRA7_L4SEC_SHAM_CLKCTRL 0>; clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4b101000 0x1000>; + + sham: sham@0 { + compatible = "ti,omap5-sham"; + reg = <0 0x300>; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&edma_xbar 119 0>; + dma-names = "rx"; + clocks = <&l3_iclk_div>; + clock-names = "fck"; + }; }; opp_supply_mpu: opp-supply@4a003b20 { @@ -763,3 +905,54 @@ #include "dra7-l4.dtsi" #include "dra7xx-clocks.dtsi" + +&prm { + prm_dsp1: prm@400 { + compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst"; + reg = <0x400 0x100>; + #reset-cells = <1>; + }; + + prm_ipu: prm@500 { + compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst"; + reg = <0x500 0x100>; + #reset-cells = <1>; + }; + + prm_core: prm@700 { + compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst"; + reg = <0x700 0x100>; + #reset-cells = <1>; + }; + + prm_iva: prm@f00 { + compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst"; + reg = <0xf00 0x100>; + }; + + prm_dsp2: prm@1b00 { + compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst"; + reg = <0x1b00 0x40>; + #reset-cells = <1>; + }; + + prm_eve1: prm@1b40 { + compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst"; + reg = <0x1b40 0x40>; + }; + + prm_eve2: prm@1b80 { + compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst"; + reg = <0x1b80 0x40>; + }; + + prm_eve3: prm@1bc0 { + compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst"; + reg = <0x1bc0 0x40>; + }; + + prm_eve4: prm@1c00 { + compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst"; + reg = <0x1c00 0x60>; + }; +}; diff --git a/arch/arm/boot/dts/dra72-evm-common.dtsi b/arch/arm/boot/dts/dra72-evm-common.dtsi index 8641a3d7d8ad..01558a86af82 100644 --- a/arch/arm/boot/dts/dra72-evm-common.dtsi +++ b/arch/arm/boot/dts/dra72-evm-common.dtsi @@ -6,7 +6,7 @@ #include "dra72x.dtsi" #include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/clk/ti-dra7-atl.h> +#include <dt-bindings/clock/ti-dra7-atl.h> / { compatible = "ti,dra72-evm", "ti,dra722", "ti,dra72", "ti,dra7"; @@ -187,6 +187,12 @@ gpio = <&gpio5 8 GPIO_ACTIVE_HIGH>; enable-active-high; }; + + clk_ov5640_fixed: clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + }; }; &dra7_pmx_core { @@ -269,6 +275,23 @@ line-name = "vin6_sel_s0"; }; }; + + ov5640@3c { + compatible = "ovti,ov5640"; + reg = <0x3c>; + + clocks = <&clk_ov5640_fixed>; + clock-names = "xclk"; + + port { + csi2_cam0: endpoint { + remote-endpoint = <&csi2_phy0>; + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; + }; + }; &uart1 { @@ -580,3 +603,11 @@ &pcie1_rc { status = "okay"; }; + +&csi2_0 { + csi2_phy0: endpoint { + remote-endpoint = <&csi2_cam0>; + clock-lanes = <0>; + data-lanes = <1 2>; + }; +}; diff --git a/arch/arm/boot/dts/dra72x.dtsi b/arch/arm/boot/dts/dra72x.dtsi index f5762709c853..82b57a35abc0 100644 --- a/arch/arm/boot/dts/dra72x.dtsi +++ b/arch/arm/boot/dts/dra72x.dtsi @@ -17,6 +17,48 @@ }; }; +&l4_per2 { + target-module@5b000 { /* 0x4845b000, ap 59 46.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x5b000 0x4>, + <0x5b010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>; + clocks = <&cam_clkctrl DRA7_CAM_VIP2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x5b000 0x1000>; + + cal: cal@0 { + compatible = "ti,dra72-cal"; + reg = <0x0000 0x400>, + <0x0800 0x40>, + <0x0900 0x40>; + reg-names = "cal_top", + "cal_rx_core0", + "cal_rx_core1"; + interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; + ti,camerrx-control = <&scm_conf 0xE94>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + csi2_0: port@0 { + reg = <0>; + }; + csi2_1: port@1 { + reg = <1>; + }; + }; + }; + }; +}; + &dss { reg = <0x58000000 0x80>, <0x58004054 0x4>, diff --git a/arch/arm/boot/dts/dra74x-mmc-iodelay.dtsi b/arch/arm/boot/dts/dra74x-mmc-iodelay.dtsi index 28ebb4eb884a..214b9e6de2c3 100644 --- a/arch/arm/boot/dts/dra74x-mmc-iodelay.dtsi +++ b/arch/arm/boot/dts/dra74x-mmc-iodelay.dtsi @@ -32,7 +32,7 @@ * * Datamanual Revisions: * - * AM572x Silicon Revision 2.0: SPRS953B, Revised November 2016 + * AM572x Silicon Revision 2.0: SPRS953F, Revised May 2019 * AM572x Silicon Revision 1.1: SPRS915R, Revised November 2016 * */ @@ -229,45 +229,45 @@ mmc3_pins_default: mmc3_pins_default { pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_clk.mmc3_clk */ - DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */ - DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */ - DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */ - DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */ - DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */ + DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_clk.mmc3_clk */ + DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */ + DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */ + DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */ + DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */ + DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */ >; }; mmc3_pins_hs: mmc3_pins_hs { pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_clk.mmc3_clk */ - DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */ - DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */ - DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */ - DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */ - DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */ + DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_clk.mmc3_clk */ + DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */ + DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */ + DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */ + DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */ + DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */ >; }; mmc3_pins_sdr12: mmc3_pins_sdr12 { pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_clk.mmc3_clk */ - DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */ - DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */ - DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */ - DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */ - DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */ + DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_clk.mmc3_clk */ + DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */ + DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */ + DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */ + DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */ + DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */ >; }; mmc3_pins_sdr25: mmc3_pins_sdr25 { pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_clk.mmc3_clk */ - DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */ - DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */ - DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */ - DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */ - DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */ + DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_clk.mmc3_clk */ + DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */ + DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */ + DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */ + DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */ + DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */ >; }; diff --git a/arch/arm/boot/dts/dra74x.dtsi b/arch/arm/boot/dts/dra74x.dtsi index d1b5b76bc5a8..c5abc436ca1f 100644 --- a/arch/arm/boot/dts/dra74x.dtsi +++ b/arch/arm/boot/dts/dra74x.dtsi @@ -66,24 +66,63 @@ }; }; - mmu0_dsp2: mmu@41501000 { - compatible = "ti,dra7-dsp-iommu"; - reg = <0x41501000 0x100>; - interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "mmu0_dsp2"; - #iommu-cells = <0>; - ti,syscon-mmuconfig = <&dsp2_system 0x0>; - status = "disabled"; + target-module@41501000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x41501000 0x4>, + <0x41501010 0x4>, + <0x41501014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + clocks = <&dsp2_clkctrl DRA7_DSP2_MMU0_DSP2_CLKCTRL 0>; + clock-names = "fck"; + resets = <&prm_dsp2 1>; + reset-names = "rstctrl"; + ranges = <0x0 0x41501000 0x1000>; + #size-cells = <1>; + #address-cells = <1>; + + mmu0_dsp2: mmu@0 { + compatible = "ti,dra7-dsp-iommu"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <0>; + ti,syscon-mmuconfig = <&dsp2_system 0x0>; + }; }; - mmu1_dsp2: mmu@41502000 { - compatible = "ti,dra7-dsp-iommu"; - reg = <0x41502000 0x100>; - interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "mmu1_dsp2"; - #iommu-cells = <0>; - ti,syscon-mmuconfig = <&dsp2_system 0x1>; - status = "disabled"; + target-module@41502000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x41502000 0x4>, + <0x41502010 0x4>, + <0x41502014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + + clocks = <&dsp2_clkctrl DRA7_DSP2_MMU0_DSP2_CLKCTRL 0>; + clock-names = "fck"; + resets = <&prm_dsp2 1>; + reset-names = "rstctrl"; + ranges = <0x0 0x41502000 0x1000>; + #size-cells = <1>; + #address-cells = <1>; + + mmu1_dsp2: mmu@0 { + compatible = "ti,dra7-dsp-iommu"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <0>; + ti,syscon-mmuconfig = <&dsp2_system 0x1>; + }; }; }; }; diff --git a/arch/arm/boot/dts/dra76-evm.dts b/arch/arm/boot/dts/dra76-evm.dts index 1fb6f13fb5e2..e958cb3d1b31 100644 --- a/arch/arm/boot/dts/dra76-evm.dts +++ b/arch/arm/boot/dts/dra76-evm.dts @@ -13,6 +13,13 @@ model = "TI DRA762 EVM"; compatible = "ti,dra76-evm", "ti,dra762", "ti,dra7"; + aliases { + display0 = &hdmi0; + + sound0 = &sound0; + sound1 = &hdmi; + }; + memory@0 { device_type = "memory"; reg = <0x0 0x80000000 0x0 0x80000000>; @@ -116,6 +123,54 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; + + clk_ov5640_fixed: clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + }; + + hdmi0: connector { + compatible = "hdmi-connector"; + label = "hdmi"; + + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&tpd12s015_out>; + }; + }; + }; + + tpd12s015: encoder { + compatible = "ti,tpd12s015"; + + gpios = <&gpio7 30 GPIO_ACTIVE_HIGH>, /* gpio7_30, CT CP HPD */ + <&gpio7 31 GPIO_ACTIVE_HIGH>, /* gpio7_31, LS OE */ + <&gpio7 12 GPIO_ACTIVE_HIGH>; /* gpio7_12/sp1_cs2, HPD */ + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + tpd12s015_in: endpoint { + remote-endpoint = <&hdmi_out>; + }; + }; + + port@1 { + reg = <1>; + + tpd12s015_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; + }; + }; + }; }; &i2c1 { @@ -317,6 +372,27 @@ }; }; +&i2c5 { + status = "okay"; + clock-frequency = <400000>; + + ov5640@3c { + compatible = "ovti,ov5640"; + reg = <0x3c>; + + clocks = <&clk_ov5640_fixed>; + clock-names = "xclk"; + + port { + csi2_cam0: endpoint { + remote-endpoint = <&csi2_phy0>; + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; + }; +}; + &cpu0 { vdd-supply = <&buck10_reg>; }; @@ -411,6 +487,23 @@ phy-supply = <&ldo3_reg>; }; +&dss { + status = "ok"; + vdda_video-supply = <&ldo5_reg>; +}; + +&hdmi { + status = "ok"; + + vdda-supply = <&ldo1_reg>; + + port { + hdmi_out: endpoint { + remote-endpoint = <&tpd12s015_in>; + }; + }; +}; + &qspi { spi-max-frequency = <96000000>; m25p80@0 { @@ -447,3 +540,11 @@ max-bitrate = <5000000>; }; }; + +&csi2_0 { + csi2_phy0: endpoint { + remote-endpoint = <&csi2_cam0>; + clock-lanes = <0>; + data-lanes = <1 2>; + }; +}; diff --git a/arch/arm/boot/dts/dra76x.dtsi b/arch/arm/boot/dts/dra76x.dtsi index cdcba3f561c4..2f7539afef2b 100644 --- a/arch/arm/boot/dts/dra76x.dtsi +++ b/arch/arm/boot/dts/dra76x.dtsi @@ -41,6 +41,48 @@ }; +&l4_per3 { + target-module@1b0000 { /* 0x489b0000, ap 25 34.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x1b0000 0x4>, + <0x1b0010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>; + clocks = <&cam_clkctrl DRA7_CAM_VIP3_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x1b0000 0x10000>; + + cal: cal@0 { + compatible = "ti,dra76-cal"; + reg = <0x0000 0x400>, + <0x0800 0x40>, + <0x0900 0x40>; + reg-names = "cal_top", + "cal_rx_core0", + "cal_rx_core1"; + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + ti,camerrx-control = <&scm_conf 0x6dc>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + csi2_0: port@0 { + reg = <0>; + }; + csi2_1: port@1 { + reg = <1>; + }; + }; + }; + }; +}; + /* MCAN interrupts are hard-wired to irqs 67, 68 */ &crossbar_mpu { ti,irqs-skip = <10 67 68 133 139 140>; diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi index 93e1eb83bed9..55cef4cac5f1 100644 --- a/arch/arm/boot/dts/dra7xx-clocks.dtsi +++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi @@ -1591,10 +1591,10 @@ rtc_cm: rtc-cm@700 { compatible = "ti,omap4-cm"; - reg = <0x700 0x100>; + reg = <0x700 0x60>; #address-cells = <1>; #size-cells = <1>; - ranges = <0 0x700 0x100>; + ranges = <0 0x700 0x60>; rtc_clkctrl: rtc-clkctrl@20 { compatible = "ti,clkctrl"; @@ -1603,6 +1603,20 @@ }; }; + vpe_cm: vpe-cm@760 { + compatible = "ti,omap4-cm"; + reg = <0x760 0xc>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x760 0xc>; + + vpe_clkctrl: vpe-clkctrl@0 { + compatible = "ti,clkctrl"; + reg = <0x0 0xc>; + #clock-cells = <2>; + }; + }; + }; &cm_core { @@ -1720,6 +1734,20 @@ }; }; + cam_cm: cam-cm@1000 { + compatible = "ti,omap4-cm"; + reg = <0x1000 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x1000 0x100>; + + cam_clkctrl: cam-clkctrl@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0x2c>; + #clock-cells = <2>; + }; + }; + dss_cm: dss-cm@1100 { compatible = "ti,omap4-cm"; reg = <0x1100 0x100>; @@ -1734,6 +1762,20 @@ }; }; + gpu_cm: gpu-cm@1200 { + compatible = "ti,omap4-cm"; + reg = <0x1200 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x1200 0x100>; + + gpu_clkctrl: gpu-clkctrl@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0x4>; + #clock-cells = <2>; + }; + }; + l3init_cm: l3init-cm@1300 { compatible = "ti,omap4-cm"; reg = <0x1300 0x100>; diff --git a/arch/arm/boot/dts/e60k02.dtsi b/arch/arm/boot/dts/e60k02.dtsi new file mode 100644 index 000000000000..ce50c4dc6f2a --- /dev/null +++ b/arch/arm/boot/dts/e60k02.dtsi @@ -0,0 +1,302 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2019 Andreas Kemnade + * based on works + * Copyright 2016 Freescale Semiconductor, Inc. + * and + * Copyright (C) 2014 Ricoh Electronic Devices Co., Ltd + * + * Netronix E60K02 board common. + * This board is equipped with different SoCs and + * found in ebook-readers like the Kobo Clara HD (with i.MX6SLL) and + * the Tolino Shine 3 (with i.MX6SL) + */ +#include <dt-bindings/input/input.h> + +/ { + + chosen { + stdout-path = &uart1; + }; + + gpio_keys: gpio-keys { + compatible = "gpio-keys"; + + power { + label = "Power"; + gpios = <&gpio5 8 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + wakeup-source; + }; + + cover { + label = "Cover"; + gpios = <&gpio5 12 GPIO_ACTIVE_LOW>; + linux,code = <SW_LID>; + linux,input-type = <EV_SW>; + wakeup-source; + }; + }; + + leds: leds { + compatible = "gpio-leds"; + + on { + label = "e60k02:white:on"; + gpios = <&gpio5 7 GPIO_ACTIVE_LOW>; + linux,default-trigger = "timer"; + }; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x20000000>; + }; + + reg_wifi: regulator-wifi { + compatible = "regulator-fixed"; + regulator-name = "SD3_SPWR"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + post-power-on-delay-ms = <20>; + reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; + }; +}; + + +&i2c1 { + clock-frequency = <100000>; + status = "okay"; + + lm3630a: backlight@36 { + reg = <0x36>; + compatible = "ti,lm3630a"; + enable-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>; + + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + led-sources = <0>; + label = "backlight_warm"; + default-brightness = <0>; + max-brightness = <255>; + }; + + led@1 { + reg = <1>; + led-sources = <1>; + label = "backlight_cold"; + default-brightness = <0>; + max-brightness = <255>; + }; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + status = "okay"; + + /* TODO: CYTTSP5 touch controller at 0x24 */ + + /* TODO: TPS65185 PMIC for E Ink at 0x68 */ + +}; + +&i2c3 { + clock-frequency = <100000>; + status = "okay"; + + ricoh619: pmic@32 { + compatible = "ricoh,rc5t619"; + reg = <0x32>; + system-power-controller; + + regulators { + dcdc1_reg: DCDC1 { + regulator-name = "DCDC1"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-max-microvolt = <900000>; + regulator-suspend-min-microvolt = <900000>; + }; + }; + + /* Core3_3V3 */ + dcdc2_reg: DCDC2 { + regulator-name = "DCDC2"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-max-microvolt = <3300000>; + regulator-suspend-min-microvolt = <3300000>; + }; + }; + + dcdc3_reg: DCDC3 { + regulator-name = "DCDC3"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-max-microvolt = <1140000>; + regulator-suspend-min-microvolt = <1140000>; + }; + }; + + /* Core4_1V2 */ + dcdc4_reg: DCDC4 { + regulator-name = "DCDC4"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-max-microvolt = <1140000>; + regulator-suspend-min-microvolt = <1140000>; + }; + }; + + /* Core4_1V8 */ + dcdc5_reg: DCDC5 { + regulator-name = "DCDC5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-max-microvolt = <1700000>; + regulator-suspend-min-microvolt = <1700000>; + }; + }; + + /* IR_3V3 */ + ldo1_reg: LDO1 { + regulator-name = "LDO1"; + regulator-boot-on; + }; + + /* Core1_3V3 */ + ldo2_reg: LDO2 { + regulator-name = "LDO2"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-max-microvolt = <3000000>; + regulator-suspend-min-microvolt = <3000000>; + }; + }; + + /* Core5_1V2 */ + ldo3_reg: LDO3 { + regulator-name = "LDO3"; + regulator-always-on; + regulator-boot-on; + }; + + ldo4_reg: LDO4 { + regulator-name = "LDO4"; + regulator-boot-on; + }; + + /* SPD_3V3 */ + ldo5_reg: LDO5 { + regulator-name = "LDO5"; + regulator-always-on; + regulator-boot-on; + }; + + /* DDR_0V6 */ + ldo6_reg: LDO6 { + regulator-name = "LDO6"; + regulator-always-on; + regulator-boot-on; + }; + + /* VDD_PWM */ + ldo7_reg: LDO7 { + regulator-name = "LDO7"; + regulator-always-on; + regulator-boot-on; + }; + + /* ldo_1v8 */ + ldo8_reg: LDO8 { + regulator-name = "LDO8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo9_reg: LDO9 { + regulator-name = "LDO9"; + regulator-boot-on; + }; + + ldo10_reg: LDO10 { + regulator-name = "LDO10"; + regulator-boot-on; + }; + + ldortc1_reg: LDORTC1 { + regulator-name = "LDORTC1"; + regulator-boot-on; + }; + }; + }; +}; + +&snvs_rtc { + /* we are using the rtc in the pmic, not disabled in imx6sll.dtsi */ + status = "disabled"; +}; + +&uart1 { + status = "okay"; +}; + +&usdhc2 { + non-removable; + status = "okay"; +}; + +&usdhc3 { + vmmc-supply = <®_wifi>; + mmc-pwrseq = <&wifi_pwrseq>; + cap-power-off-card; + non-removable; + status = "okay"; +}; + +&usbotg1 { + pinctrl-names = "default"; + disable-over-current; + srp-disable; + hnp-disable; + adp-disable; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/emev2.dtsi b/arch/arm/boot/dts/emev2.dtsi index 67d86012a85c..96678ddbb4e6 100644 --- a/arch/arm/boot/dts/emev2.dtsi +++ b/arch/arm/boot/dts/emev2.dtsi @@ -212,6 +212,7 @@ interrupt-controller; #interrupt-cells = <2>; }; + gpio1: gpio@e0050080 { compatible = "renesas,em-gio"; reg = <0xe0050080 0x2c>, <0xe00500c0 0x20>; @@ -224,6 +225,7 @@ interrupt-controller; #interrupt-cells = <2>; }; + gpio2: gpio@e0050100 { compatible = "renesas,em-gio"; reg = <0xe0050100 0x2c>, <0xe0050140 0x20>; @@ -236,6 +238,7 @@ interrupt-controller; #interrupt-cells = <2>; }; + gpio3: gpio@e0050180 { compatible = "renesas,em-gio"; reg = <0xe0050180 0x2c>, <0xe00501c0 0x20>; @@ -248,6 +251,7 @@ interrupt-controller; #interrupt-cells = <2>; }; + gpio4: gpio@e0050200 { compatible = "renesas,em-gio"; reg = <0xe0050200 0x2c>, <0xe0050240 0x20>; diff --git a/arch/arm/boot/dts/ep7211-edb7211.dts b/arch/arm/boot/dts/ep7211-edb7211.dts index a0c270f63fee..da076479c8e2 100644 --- a/arch/arm/boot/dts/ep7211-edb7211.dts +++ b/arch/arm/boot/dts/ep7211-edb7211.dts @@ -25,11 +25,11 @@ display: display { model = "320x240x4"; - native-mode = <&timing0>; bits-per-pixel = <4>; ac-prescale = <17>; display-timings { + native-mode = <&timing0>; timing0: 320x240 { hactive = <320>; hback-porch = <0>; diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi index 5659c4a10729..044e5da64a76 100644 --- a/arch/arm/boot/dts/exynos3250.dtsi +++ b/arch/arm/boot/dts/exynos3250.dtsi @@ -138,19 +138,19 @@ #size-cells = <1>; ranges; - sysram@2020000 { + sram@2020000 { compatible = "mmio-sram"; reg = <0x02020000 0x40000>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x02020000 0x40000>; - smp-sysram@0 { + smp-sram@0 { compatible = "samsung,exynos4210-sysram"; reg = <0x0 0x1000>; }; - smp-sysram@3f000 { + smp-sram@3f000 { compatible = "samsung,exynos4210-sysram-ns"; reg = <0x3f000 0x1000>; }; @@ -265,7 +265,7 @@ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; }; - mct@10050000 { + timer@10050000 { compatible = "samsung,exynos4210-mct"; reg = <0x10050000 0x800>; interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>, @@ -314,8 +314,7 @@ sysmmu_jpeg: sysmmu@11a60000 { compatible = "samsung,exynos-sysmmu"; reg = <0x11a60000 0x1000>; - interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; clock-names = "sysmmu", "master"; clocks = <&cmu CLK_SMMUJPEG>, <&cmu CLK_JPEG>; power-domains = <&pd_cam>; @@ -355,8 +354,7 @@ sysmmu_fimd0: sysmmu@11e20000 { compatible = "samsung,exynos-sysmmu"; reg = <0x11e20000 0x1000>; - interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; clock-names = "sysmmu", "master"; clocks = <&cmu CLK_SMMUFIMD0>, <&cmu CLK_FIMD0>; power-domains = <&pd_lcd0>; @@ -450,8 +448,7 @@ }; adc: adc@126c0000 { - compatible = "samsung,exynos3250-adc", - "samsung,exynos-adc-v2"; + compatible = "samsung,exynos3250-adc"; reg = <0x126C0000 0x100>; interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>; clock-names = "adc", "sclk"; @@ -508,8 +505,7 @@ sysmmu_mfc: sysmmu@13620000 { compatible = "samsung,exynos-sysmmu"; reg = <0x13620000 0x1000>; - interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; clock-names = "sysmmu", "master"; clocks = <&cmu CLK_SMMUMFC_L>, <&cmu CLK_MFC>; power-domains = <&pd_mfc>; diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index 1264cc431ff6..d2779a790ce3 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -111,28 +111,28 @@ syscon = <&pmu_system_controller>; }; - pd_mfc: mfc-power-domain@10023c40 { + pd_mfc: power-domain@10023c40 { compatible = "samsung,exynos4210-pd"; reg = <0x10023C40 0x20>; #power-domain-cells = <0>; label = "MFC"; }; - pd_g3d: g3d-power-domain@10023c60 { + pd_g3d: power-domain@10023c60 { compatible = "samsung,exynos4210-pd"; reg = <0x10023C60 0x20>; #power-domain-cells = <0>; label = "G3D"; }; - pd_lcd0: lcd0-power-domain@10023c80 { + pd_lcd0: power-domain@10023c80 { compatible = "samsung,exynos4210-pd"; reg = <0x10023C80 0x20>; #power-domain-cells = <0>; label = "LCD0"; }; - pd_tv: tv-power-domain@10023c20 { + pd_tv: power-domain@10023c20 { compatible = "samsung,exynos4210-pd"; reg = <0x10023C20 0x20>; #power-domain-cells = <0>; @@ -140,21 +140,21 @@ label = "TV"; }; - pd_cam: cam-power-domain@10023c00 { + pd_cam: power-domain@10023c00 { compatible = "samsung,exynos4210-pd"; reg = <0x10023C00 0x20>; #power-domain-cells = <0>; label = "CAM"; }; - pd_gps: gps-power-domain@10023ce0 { + pd_gps: power-domain@10023ce0 { compatible = "samsung,exynos4210-pd"; reg = <0x10023CE0 0x20>; #power-domain-cells = <0>; label = "GPS"; }; - pd_gps_alive: gps-alive-power-domain@10023d00 { + pd_gps_alive: power-domain@10023d00 { compatible = "samsung,exynos4210-pd"; reg = <0x10023D00 0x20>; #power-domain-cells = <0>; @@ -380,23 +380,8 @@ clocks = <&clock CLK_USB_HOST>; clock-names = "usbhost"; status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; - phys = <&exynos_usbphy 1>; - status = "disabled"; - }; - port@1 { - reg = <1>; - phys = <&exynos_usbphy 2>; - status = "disabled"; - }; - port@2 { - reg = <2>; - phys = <&exynos_usbphy 3>; - status = "disabled"; - }; + phys = <&exynos_usbphy 1>, <&exynos_usbphy 2>, <&exynos_usbphy 3>; + phy-names = "host", "hsic0", "hsic1"; }; ohci: ohci@12590000 { @@ -406,13 +391,8 @@ clocks = <&clock CLK_USB_HOST>; clock-names = "usbhost"; status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; - phys = <&exynos_usbphy 1>; - status = "disabled"; - }; + phys = <&exynos_usbphy 1>; + phy-names = "host"; }; gpu: gpu@13000000 { diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts index 82a8b5449978..a1bdf7830a87 100644 --- a/arch/arm/boot/dts/exynos4210-universal_c210.dts +++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts @@ -204,9 +204,8 @@ &ehci { status = "okay"; - port@0 { - status = "okay"; - }; + phys = <&exynos_usbphy 1>; + phy-names = "host"; }; &exynos_usbphy { @@ -520,9 +519,6 @@ &ohci { status = "okay"; - port@0 { - status = "okay"; - }; }; &pinctrl_1 { @@ -594,16 +590,16 @@ }; &sysram { - smp-sysram@0 { + smp-sram@0 { status = "disabled"; }; - smp-sysram@5000 { + smp-sram@5000 { compatible = "samsung,exynos4210-sysram"; reg = <0x5000 0x1000>; }; - smp-sysram@1f000 { + smp-sram@1f000 { status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi index f220716239db..b4466232f0c1 100644 --- a/arch/arm/boot/dts/exynos4210.dtsi +++ b/arch/arm/boot/dts/exynos4210.dtsi @@ -72,25 +72,25 @@ }; soc: soc { - sysram: sysram@2020000 { + sysram: sram@2020000 { compatible = "mmio-sram"; reg = <0x02020000 0x20000>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x02020000 0x20000>; - smp-sysram@0 { + smp-sram@0 { compatible = "samsung,exynos4210-sysram"; reg = <0x0 0x1000>; }; - smp-sysram@1f000 { + smp-sram@1f000 { compatible = "samsung,exynos4210-sysram-ns"; reg = <0x1f000 0x1000>; }; }; - pd_lcd1: lcd1-power-domain@10023ca0 { + pd_lcd1: power-domain@10023ca0 { compatible = "samsung,exynos4210-pd"; reg = <0x10023CA0 0x20>; #power-domain-cells = <0>; @@ -106,26 +106,17 @@ arm,data-latency = <2 2 1>; }; - mct: mct@10050000 { + mct: timer@10050000 { compatible = "samsung,exynos4210-mct"; reg = <0x10050000 0x800>; - interrupt-parent = <&mct_map>; - interrupts = <0>, <1>, <2>, <3>, <4>, <5>; clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>; clock-names = "fin_pll", "mct"; - - mct_map: mct-map { - #interrupt-cells = <1>; - #address-cells = <0>; - #size-cells = <0>; - interrupt-map = - <0 &gic 0 57 IRQ_TYPE_LEVEL_HIGH>, - <1 &gic 0 69 IRQ_TYPE_LEVEL_HIGH>, - <2 &combiner 12 6>, - <3 &combiner 12 7>, - <4 &gic 0 42 IRQ_TYPE_LEVEL_HIGH>, - <5 &gic 0 48 IRQ_TYPE_LEVEL_HIGH>; - }; + interrupts-extended = <&gic GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, + <&combiner 12 6>, + <&combiner 12 7>, + <&gic GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; }; watchdog: watchdog@10060000 { diff --git a/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi b/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi index ce87d2ff27aa..31719c079d67 100644 --- a/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi +++ b/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi @@ -168,3 +168,8 @@ vdda-supply = <&ldo17_reg>; status = "okay"; }; + +&touchkey_reg { + gpio = <&gpm0 0 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/exynos4412-itop-elite.dts b/arch/arm/boot/dts/exynos4412-itop-elite.dts index 0dedeba89b5f..f6d0a5f5d339 100644 --- a/arch/arm/boot/dts/exynos4412-itop-elite.dts +++ b/arch/arm/boot/dts/exynos4412-itop-elite.dts @@ -146,13 +146,8 @@ /* In order to reset USB ethernet */ samsung,vbus-gpio = <&gpc0 1 GPIO_ACTIVE_HIGH>; - port@0 { - status = "okay"; - }; - - port@2 { - status = "okay"; - }; + phys = <&exynos_usbphy 1>, <&exynos_usbphy 3>; + phy-names = "host", "hsic1"; }; &exynos_usbphy { diff --git a/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi b/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi index 462a5409b1de..dfceb155b3a7 100644 --- a/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi +++ b/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi @@ -377,7 +377,7 @@ buck1_reg: BUCK1 { regulator-name = "vdd_mif"; regulator-min-microvolt = <850000>; - regulator-max-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; regulator-always-on; regulator-boot-on; op_mode = <1>; /* Normal Mode */ @@ -386,7 +386,7 @@ buck2_reg: BUCK2 { regulator-name = "vdd_arm"; regulator-min-microvolt = <850000>; - regulator-max-microvolt = <1456250>; + regulator-max-microvolt = <1456250>; regulator-always-on; regulator-boot-on; op_mode = <1>; /* Normal Mode */ @@ -395,7 +395,7 @@ buck3_reg: BUCK3 { regulator-name = "vdd_int"; regulator-min-microvolt = <875000>; - regulator-max-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; regulator-always-on; regulator-boot-on; op_mode = <1>; /* Normal Mode */ @@ -404,7 +404,7 @@ buck4_reg: BUCK4 { regulator-name = "vdd_g3d"; regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; regulator-always-on; regulator-boot-on; op_mode = <1>; /* Normal Mode */ @@ -413,7 +413,7 @@ buck5_reg: BUCK5 { regulator-name = "vdd_m12"; regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; regulator-always-on; regulator-boot-on; op_mode = <1>; /* Normal Mode */ @@ -422,7 +422,7 @@ buck6_reg: BUCK6 { regulator-name = "vdd12_5m"; regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; regulator-always-on; regulator-boot-on; op_mode = <1>; /* Normal Mode */ @@ -431,7 +431,7 @@ buck7_reg: BUCK7 { regulator-name = "pvdd_buck7"; regulator-min-microvolt = <750000>; - regulator-max-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; regulator-boot-on; regulator-always-on; op_mode = <1>; /* Normal Mode */ @@ -440,7 +440,7 @@ buck8_reg: BUCK8 { regulator-name = "pvdd_buck8"; regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; regulator-boot-on; regulator-always-on; op_mode = <1>; /* Normal Mode */ @@ -449,7 +449,7 @@ buck9_reg: BUCK9 { regulator-name = "vddf28_emmc"; regulator-min-microvolt = <750000>; - regulator-max-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; op_mode = <1>; /* Normal Mode */ }; }; diff --git a/arch/arm/boot/dts/exynos4412-midas.dtsi b/arch/arm/boot/dts/exynos4412-midas.dtsi index 83be3a797411..3023bc3b68ce 100644 --- a/arch/arm/boot/dts/exynos4412-midas.dtsi +++ b/arch/arm/boot/dts/exynos4412-midas.dtsi @@ -13,6 +13,7 @@ #include "exynos4412.dtsi" #include "exynos4412-ppmu-common.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/clock/maxim,max77686.h> #include <dt-bindings/pinctrl/samsung.h> @@ -92,6 +93,15 @@ enable-active-high; }; + touchkey_reg: voltage-regulator-6 { + compatible = "regulator-fixed"; + regulator-name = "LED_VDD_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + status = "disabled"; + }; + gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; @@ -197,6 +207,25 @@ }; }; + i2c-gpio-4 { + compatible = "i2c-gpio"; + sda-gpios = <&gpl0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpl0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + + touchkey@20 { + compatible = "cypress,midas-touchkey"; + reg = <0x20>; + vdd-supply = <&touchkey_reg>; + vcc-supply = <&ldo5_reg>; + interrupt-parent = <&gpj0>; + interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + linux,keycodes = <KEY_BACK KEY_MENU>; + }; + }; + i2c-mhl { compatible = "i2c-gpio"; gpios = <&gpf0 4 GPIO_ACTIVE_HIGH>, <&gpf0 6 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/exynos4412-n710x.dts b/arch/arm/boot/dts/exynos4412-n710x.dts index fe2bfd76cc4e..98cd1284cd90 100644 --- a/arch/arm/boot/dts/exynos4412-n710x.dts +++ b/arch/arm/boot/dts/exynos4412-n710x.dts @@ -73,3 +73,8 @@ vdda-supply = <&cam_vdda_reg>; status = "okay"; }; + +&touchkey_reg { + gpio = <&gpm0 5 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi index ea55f377d17c..9c39e82e4ecb 100644 --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi @@ -267,7 +267,7 @@ intn-gpios = <&gpx3 0 GPIO_ACTIVE_HIGH>; connect-gpios = <&gpx3 4 GPIO_ACTIVE_HIGH>; - reset-gpios = <&gpx3 5 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpx3 5 GPIO_ACTIVE_LOW>; initial-mode = <1>; }; diff --git a/arch/arm/boot/dts/exynos4412-odroidu3.dts b/arch/arm/boot/dts/exynos4412-odroidu3.dts index 96d99887bceb..8ff243ba4542 100644 --- a/arch/arm/boot/dts/exynos4412-odroidu3.dts +++ b/arch/arm/boot/dts/exynos4412-odroidu3.dts @@ -105,12 +105,8 @@ }; &ehci { - port@1 { - status = "okay"; - }; - port@2 { - status = "okay"; - }; + phys = <&exynos_usbphy 2>, <&exynos_usbphy 3>; + phy-names = "hsic0", "hsic1"; }; &sound { diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts index a2251581f6b6..3ea2a0101e80 100644 --- a/arch/arm/boot/dts/exynos4412-odroidx.dts +++ b/arch/arm/boot/dts/exynos4412-odroidx.dts @@ -72,9 +72,8 @@ }; &ehci { - port@1 { - status = "okay"; - }; + phys = <&exynos_usbphy 2>; + phy-names = "hsic0"; }; &mshc_0 { diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts index 698de4345d16..ecd14b283a6b 100644 --- a/arch/arm/boot/dts/exynos4412-origen.dts +++ b/arch/arm/boot/dts/exynos4412-origen.dts @@ -88,13 +88,8 @@ &ehci { samsung,vbus-gpio = <&gpx3 5 1>; status = "okay"; - - port@1 { - status = "okay"; - }; - port@2 { - status = "okay"; - }; + phys = <&exynos_usbphy 2>, <&exynos_usbphy 3>; + phy-names = "hsic0", "hsic1"; }; &fimd { diff --git a/arch/arm/boot/dts/exynos4412-tiny4412.dts b/arch/arm/boot/dts/exynos4412-tiny4412.dts index 01f37b5ac9c4..3a91de8a8082 100644 --- a/arch/arm/boot/dts/exynos4412-tiny4412.dts +++ b/arch/arm/boot/dts/exynos4412-tiny4412.dts @@ -66,6 +66,31 @@ clock-frequency = <24000000>; }; }; + + panel { + compatible = "innolux,at070tn92"; + + port { + panel_input: endpoint { + remote-endpoint = <&lcdc_output>; + }; + }; + }; +}; + +&fimd { + pinctrl-0 = <&lcd_clk>, <&lcd_data24>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + port@3 { + reg = <3>; + lcdc_output: endpoint { + remote-endpoint = <&panel_input>; + }; + }; }; &rtc { diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi index d20db2dfe8e2..48868947373e 100644 --- a/arch/arm/boot/dts/exynos4412.dtsi +++ b/arch/arm/boot/dts/exynos4412.dtsi @@ -188,25 +188,25 @@ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; }; - sysram@2020000 { + sram@2020000 { compatible = "mmio-sram"; reg = <0x02020000 0x40000>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x02020000 0x40000>; - smp-sysram@0 { + smp-sram@0 { compatible = "samsung,exynos4210-sysram"; reg = <0x0 0x1000>; }; - smp-sysram@2f000 { + smp-sram@2f000 { compatible = "samsung,exynos4210-sysram-ns"; reg = <0x2f000 0x1000>; }; }; - pd_isp: isp-power-domain@10023ca0 { + pd_isp: power-domain@10023ca0 { compatible = "samsung,exynos4210-pd"; reg = <0x10023CA0 0x20>; #power-domain-cells = <0>; @@ -243,25 +243,16 @@ clock-names = "aclk200", "aclk400_mcuisp"; }; - mct@10050000 { + timer@10050000 { compatible = "samsung,exynos4412-mct"; reg = <0x10050000 0x800>; - interrupt-parent = <&mct_map>; - interrupts = <0>, <1>, <2>, <3>, <4>; clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>; clock-names = "fin_pll", "mct"; - - mct_map: mct-map { - #interrupt-cells = <1>; - #address-cells = <0>; - #size-cells = <0>; - interrupt-map = - <0 &gic 0 57 IRQ_TYPE_LEVEL_HIGH>, - <1 &combiner 12 5>, - <2 &combiner 12 6>, - <3 &combiner 12 7>, - <4 &gic 1 12 IRQ_TYPE_LEVEL_HIGH>; - }; + interrupts-extended = <&gic GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, + <&combiner 12 5>, + <&combiner 12 6>, + <&combiner 12 7>, + <&gic GIC_PPI 12 IRQ_TYPE_LEVEL_HIGH>; }; watchdog: watchdog@10060000 { diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi index 67f9b4504a42..22eb951c614c 100644 --- a/arch/arm/boot/dts/exynos5.dtsi +++ b/arch/arm/boot/dts/exynos5.dtsi @@ -35,7 +35,7 @@ #size-cells = <1>; ranges; - chipid@10000000 { + chipid: chipid@10000000 { compatible = "samsung,exynos4210-chipid"; reg = <0x10000000 0x100>; }; diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts index dc6fa6fe83f1..f8ebc620f42d 100644 --- a/arch/arm/boot/dts/exynos5250-arndale.dts +++ b/arch/arm/boot/dts/exynos5250-arndale.dts @@ -11,10 +11,11 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/input/input.h> #include <dt-bindings/clock/samsung,s2mps11.h> +#include <dt-bindings/sound/samsung-i2s.h> #include "exynos5250.dtsi" / { - model = "Insignal Arndale evaluation board based on EXYNOS5250"; + model = "Insignal Arndale evaluation board based on Exynos5250"; compatible = "insignal,arndale", "samsung,exynos5250", "samsung,exynos5"; memory@40000000 { @@ -135,6 +136,12 @@ }; }; + sound { + compatible = "samsung,arndale-wm1811"; + samsung,audio-cpu = <&i2s0>; + samsung,audio-codec = <&wm1811>; + }; + fixed-rate-clocks { xxti { compatible = "samsung,clock-xxti"; @@ -147,10 +154,20 @@ compatible = "smsc,usb3503a"; reset-gpios = <&gpx3 5 GPIO_ACTIVE_LOW>; - connect-gpios = <&gpd1 7 GPIO_ACTIVE_LOW>; + connect-gpios = <&gpd1 7 GPIO_ACTIVE_HIGH>; }; }; +&clock { + assigned-clocks = <&clock CLK_FOUT_EPLL>; + assigned-clock-rates = <49152000>; +}; + +&clock_audss { + assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>; + assigned-clock-parents = <&clock CLK_FOUT_EPLL>; +}; + &cpu0 { cpu0-supply = <&buck2_reg>; }; @@ -461,8 +478,8 @@ buck4_reg: BUCK4 { regulator-name = "vdd_g3d"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1300000>; regulator-always-on; regulator-boot-on; op_mode = <1>; @@ -502,9 +519,11 @@ &i2c_3 { status = "okay"; - wm1811a@1a { + wm1811: codec@1a { compatible = "wlf,wm1811"; reg = <0x1a>; + clocks = <&i2s0 CLK_I2S_CDCLK>; + clock-names = "MCLK1"; AVDD2-supply = <&main_dc_reg>; CPVDD-supply = <&main_dc_reg>; @@ -540,6 +559,17 @@ }; &i2s0 { + assigned-clocks = <&i2s0 CLK_I2S_RCLK_SRC>; + assigned-clock-parents = <&clock_audss EXYNOS_I2S_BUS>; + status = "okay"; +}; + +&i2s0_bus { + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV2>; +}; + +&mali { + mali-supply = <&buck4_reg>; status = "okay"; }; diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts index 6dc96948a9cc..5c42df024adf 100644 --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * SAMSUNG SMDK5250 board device tree source + * Samsung SMDK5250 board device tree source * * Copyright (c) 2012 Samsung Electronics Co., Ltd. * http://www.samsung.com @@ -12,7 +12,7 @@ #include "exynos5250.dtsi" / { - model = "SAMSUNG SMDK5250 board based on EXYNOS5250"; + model = "Samsung SMDK5250 board based on Exynos5250"; compatible = "samsung,smdk5250", "samsung,exynos5250", "samsung,exynos5"; aliases { diff --git a/arch/arm/boot/dts/exynos5250-snow-common.dtsi b/arch/arm/boot/dts/exynos5250-snow-common.dtsi index fd9226d3b207..c952a615148e 100644 --- a/arch/arm/boot/dts/exynos5250-snow-common.dtsi +++ b/arch/arm/boot/dts/exynos5250-snow-common.dtsi @@ -529,6 +529,11 @@ status = "okay"; }; +&mali { + mali-supply = <&buck4_reg>; + status = "okay"; +}; + &mixer { status = "okay"; }; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index d5e0392b409e..b6135af7ef39 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -1,16 +1,16 @@ // SPDX-License-Identifier: GPL-2.0 /* - * SAMSUNG EXYNOS5250 SoC device tree source + * Samsung Exynos5250 SoC device tree source * * Copyright (c) 2012 Samsung Electronics Co., Ltd. * http://www.samsung.com * - * SAMSUNG EXYNOS5250 SoC device nodes are listed in this file. - * EXYNOS5250 based board files can include this file and provide + * Samsung Exynos5250 SoC device nodes are listed in this file. + * Exynos5250 based board files can include this file and provide * values for board specfic bindings. * * Note: This file does not include device nodes for all the controllers in - * EXYNOS5250 SoC. As device tree coverage for EXYNOS5250 increases, + * Exynos5250 SoC. As device tree coverage for Exynos5250 increases, * additional nodes can be added to this file. */ @@ -164,19 +164,19 @@ }; soc: soc { - sysram@2020000 { + sram@2020000 { compatible = "mmio-sram"; reg = <0x02020000 0x30000>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x02020000 0x30000>; - smp-sysram@0 { + smp-sram@0 { compatible = "samsung,exynos4210-sysram"; reg = <0x0 0x1000>; }; - smp-sysram@2f000 { + smp-sram@2f000 { compatible = "samsung,exynos4210-sysram-ns"; reg = <0x2f000 0x1000>; }; @@ -233,28 +233,17 @@ power-domains = <&pd_mau>; }; - mct@101c0000 { + timer@101c0000 { compatible = "samsung,exynos4210-mct"; reg = <0x101C0000 0x800>; - interrupt-controller; - #interrupt-cells = <2>; - interrupt-parent = <&mct_map>; - interrupts = <0 0>, <1 0>, <2 0>, <3 0>, - <4 0>, <5 0>; clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>; clock-names = "fin_pll", "mct"; - - mct_map: mct-map { - #interrupt-cells = <2>; - #address-cells = <0>; - #size-cells = <0>; - interrupt-map = <0x0 0 &combiner 23 3>, - <0x1 0 &combiner 23 4>, - <0x2 0 &combiner 25 2>, - <0x3 0 &combiner 25 3>, - <0x4 0 &gic 0 120 IRQ_TYPE_LEVEL_HIGH>, - <0x5 0 &gic 0 121 IRQ_TYPE_LEVEL_HIGH>; - }; + interrupts-extended = <&combiner 23 3>, + <&combiner 23 4>, + <&combiner 25 2>, + <&combiner 25 3>, + <&gic GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; }; pinctrl_0: pinctrl@11400000 { @@ -328,6 +317,53 @@ iommus = <&sysmmu_rotator>; }; + mali: gpu@11800000 { + compatible = "samsung,exynos5250-mali", "arm,mali-t604"; + reg = <0x11800000 0x5000>; + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "job", "mmu", "gpu"; + clocks = <&clock CLK_G3D>; + clock-names = "core"; + operating-points-v2 = <&gpu_opp_table>; + power-domains = <&pd_g3d>; + status = "disabled"; + + gpu_opp_table: gpu-opp-table { + compatible = "operating-points-v2"; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + opp-microvolt = <925000>; + }; + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + opp-microvolt = <925000>; + }; + opp-266000000 { + opp-hz = /bits/ 64 <266000000>; + opp-microvolt = <1025000>; + }; + opp-350000000 { + opp-hz = /bits/ 64 <350000000>; + opp-microvolt = <1075000>; + }; + opp-400000000 { + opp-hz = /bits/ 64 <400000000>; + opp-microvolt = <1125000>; + }; + opp-450000000 { + opp-hz = /bits/ 64 <450000000>; + opp-microvolt = <1150000>; + }; + opp-533000000 { + opp-hz = /bits/ 64 <533000000>; + opp-microvolt = <1250000>; + }; + }; + }; + tmu: tmu@10060000 { compatible = "samsung,exynos5250-tmu"; reg = <0x10060000 0x100>; @@ -346,6 +382,7 @@ clock-names = "sata", "sclk_sata"; phys = <&sata_phy>; phy-names = "sata-phy"; + ports-implemented = <0x1>; status = "disabled"; }; @@ -538,9 +575,9 @@ compatible = "samsung,s5pv210-i2s"; status = "disabled"; reg = <0x03830000 0x100>; - dmas = <&pdma0 10 - &pdma0 9 - &pdma0 8>; + dmas = <&pdma0 10>, + <&pdma0 9>, + <&pdma0 8>; dma-names = "tx", "rx", "tx-sec"; clocks = <&clock_audss EXYNOS_I2S_BUS>, <&clock_audss EXYNOS_I2S_BUS>, @@ -558,8 +595,8 @@ compatible = "samsung,s3c6410-i2s"; status = "disabled"; reg = <0x12D60000 0x100>; - dmas = <&pdma1 12 - &pdma1 11>; + dmas = <&pdma1 12>, + <&pdma1 11>; dma-names = "tx", "rx"; clocks = <&clock CLK_I2S1>, <&clock CLK_DIV_I2S1>; clock-names = "iis", "i2s_opclk0"; @@ -573,8 +610,8 @@ compatible = "samsung,s3c6410-i2s"; status = "disabled"; reg = <0x12D70000 0x100>; - dmas = <&pdma0 12 - &pdma0 11>; + dmas = <&pdma0 12>, + <&pdma0 11>; dma-names = "tx", "rx"; clocks = <&clock CLK_I2S2>, <&clock CLK_DIV_I2S2>; clock-names = "iis", "i2s_opclk0"; @@ -617,12 +654,8 @@ clocks = <&clock CLK_USB2>; clock-names = "usbhost"; - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; - phys = <&usb2_phy_gen 1>; - }; + phys = <&usb2_phy_gen 1>; + phy-names = "host"; }; ohci: usb@12120000 { @@ -632,12 +665,8 @@ clocks = <&clock CLK_USB2>; clock-names = "usbhost"; - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; - phys = <&usb2_phy_gen 1>; - }; + phys = <&usb2_phy_gen 1>; + phy-names = "host"; }; usb2_phy_gen: phy@12130000 { diff --git a/arch/arm/boot/dts/exynos5260-xyref5260.dts b/arch/arm/boot/dts/exynos5260-xyref5260.dts index 36a2b77eeb9d..0dc2ec16aa0a 100644 --- a/arch/arm/boot/dts/exynos5260-xyref5260.dts +++ b/arch/arm/boot/dts/exynos5260-xyref5260.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * SAMSUNG XYREF5260 board device tree source + * Samsung XYREF5260 board device tree source * * Copyright (c) 2013 Samsung Electronics Co., Ltd. * http://www.samsung.com @@ -10,7 +10,7 @@ #include "exynos5260.dtsi" / { - model = "SAMSUNG XYREF5260 board based on EXYNOS5260"; + model = "Samsung XYREF5260 board based on Exynos5260"; compatible = "samsung,xyref5260", "samsung,exynos5260", "samsung,exynos5"; memory@20000000 { diff --git a/arch/arm/boot/dts/exynos5260.dtsi b/arch/arm/boot/dts/exynos5260.dtsi index 3581b57fbbf7..154df70128f3 100644 --- a/arch/arm/boot/dts/exynos5260.dtsi +++ b/arch/arm/boot/dts/exynos5260.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * SAMSUNG EXYNOS5260 SoC device tree source + * Samsung Exynos5260 SoC device tree source * * Copyright (c) 2013 Samsung Electronics Co., Ltd. * http://www.samsung.com @@ -180,7 +180,7 @@ reg = <0x10000000 0x100>; }; - mct: mct@100b0000 { + mct: timer@100b0000 { compatible = "samsung,exynos4210-mct"; reg = <0x100B0000 0x1000>; clocks = <&fin_pll>, <&clock_peri PERI_CLK_MCT>; diff --git a/arch/arm/boot/dts/exynos5410-odroidxu.dts b/arch/arm/boot/dts/exynos5410-odroidxu.dts index e0db251e253f..4f9297ae0763 100644 --- a/arch/arm/boot/dts/exynos5410-odroidxu.dts +++ b/arch/arm/boot/dts/exynos5410-odroidxu.dts @@ -170,7 +170,7 @@ intn-gpios = <&gpx0 7 GPIO_ACTIVE_HIGH>; connect-gpios = <&gpx0 6 GPIO_ACTIVE_HIGH>; - reset-gpios = <&gpx1 4 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpx1 4 GPIO_ACTIVE_LOW>; initial-mode = <1>; clock-names = "refclk"; diff --git a/arch/arm/boot/dts/exynos5410-smdk5410.dts b/arch/arm/boot/dts/exynos5410-smdk5410.dts index dffa5e3ed90c..5282b5deca86 100644 --- a/arch/arm/boot/dts/exynos5410-smdk5410.dts +++ b/arch/arm/boot/dts/exynos5410-smdk5410.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * SAMSUNG SMDK5410 board device tree source + * Samsung SMDK5410 board device tree source * * Copyright (c) 2013 Samsung Electronics Co., Ltd. * http://www.samsung.com @@ -10,7 +10,7 @@ #include "exynos5410.dtsi" #include <dt-bindings/interrupt-controller/irq.h> / { - model = "Samsung SMDK5410 board based on EXYNOS5410"; + model = "Samsung SMDK5410 board based on Exynos5410"; compatible = "samsung,smdk5410", "samsung,exynos5410", "samsung,exynos5"; memory@40000000 { diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi index e6f78b1cee7c..2eab80bf5f3a 100644 --- a/arch/arm/boot/dts/exynos5410.dtsi +++ b/arch/arm/boot/dts/exynos5410.dtsi @@ -1,12 +1,12 @@ // SPDX-License-Identifier: GPL-2.0 /* - * SAMSUNG EXYNOS5410 SoC device tree source + * Samsung Exynos5410 SoC device tree source * * Copyright (c) 2013 Samsung Electronics Co., Ltd. * http://www.samsung.com * - * SAMSUNG EXYNOS5410 SoC device nodes are listed in this file. - * EXYNOS5410 based board files can include this file and provide + * Samsung Exynos5410 SoC device nodes are listed in this file. + * Exynos5410 based board files can include this file and provide * values for board specfic bindings. */ @@ -222,9 +222,9 @@ audi2s0: i2s@3830000 { compatible = "samsung,exynos5420-i2s"; reg = <0x03830000 0x100>; - dmas = <&pdma0 10 - &pdma0 9 - &pdma0 8>; + dmas = <&pdma0 10>, + <&pdma0 9>, + <&pdma0 8>; dma-names = "tx", "rx", "tx-sec"; clocks = <&clock_audss EXYNOS_I2S_BUS>, <&clock_audss EXYNOS_I2S_BUS>, diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts index 592d7b45ecc8..ee28d30f5476 100644 --- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts +++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts @@ -15,7 +15,7 @@ #include <dt-bindings/clock/samsung,s2mps11.h> / { - model = "Insignal Arndale Octa evaluation board based on EXYNOS5420"; + model = "Insignal Arndale Octa evaluation board based on Exynos5420"; compatible = "insignal,arndale-octa", "samsung,exynos5420", "samsung,exynos5"; memory@20000000 { diff --git a/arch/arm/boot/dts/exynos5420-cpus.dtsi b/arch/arm/boot/dts/exynos5420-cpus.dtsi index 0ee6e92a3c29..58d1c54cf925 100644 --- a/arch/arm/boot/dts/exynos5420-cpus.dtsi +++ b/arch/arm/boot/dts/exynos5420-cpus.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * SAMSUNG EXYNOS5420 SoC cpu device tree source + * Samsung Exynos5420 SoC cpu device tree source * * Copyright (c) 2015 Samsung Electronics Co., Ltd. * http://www.samsung.com diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts index f78db6809cca..2bcbdf8a39bf 100644 --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts @@ -440,6 +440,7 @@ regulator-name = "vdd_ldo10"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-always-on; regulator-state-mem { regulator-off-in-suspend; }; @@ -1064,6 +1065,10 @@ status = "okay"; }; +&timer { + arm,cpu-registers-not-fw-configured; +}; + &tmu_cpu0 { vtmu-supply = <&ldo10_reg>; }; diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts index 8240e5186972..e3f2afe8359a 100644 --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * SAMSUNG SMDK5420 board device tree source + * Samsung SMDK5420 board device tree source * * Copyright (c) 2013 Samsung Electronics Co., Ltd. * http://www.samsung.com @@ -12,7 +12,7 @@ #include <dt-bindings/gpio/gpio.h> / { - model = "Samsung SMDK5420 board based on EXYNOS5420"; + model = "Samsung SMDK5420 board based on Exynos5420"; compatible = "samsung,smdk5420", "samsung,exynos5420", "samsung,exynos5"; memory@20000000 { diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index 55d4dbf6f83a..b672080e7469 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -1,12 +1,12 @@ // SPDX-License-Identifier: GPL-2.0 /* - * SAMSUNG EXYNOS5420 SoC device tree source + * Samsung Exynos5420 SoC device tree source * * Copyright (c) 2013 Samsung Electronics Co., Ltd. * http://www.samsung.com * - * SAMSUNG EXYNOS5420 SoC device nodes are listed in this file. - * EXYNOS5420 based board files can include this file and provide + * Samsung Exynos5420 SoC device nodes are listed in this file. + * Exynos5420 based board files can include this file and provide * values for board specfic bindings. */ @@ -48,62 +48,62 @@ opp-1800000000 { opp-hz = /bits/ 64 <1800000000>; - opp-microvolt = <1250000>; + opp-microvolt = <1250000 1250000 1500000>; clock-latency-ns = <140000>; }; opp-1700000000 { opp-hz = /bits/ 64 <1700000000>; - opp-microvolt = <1212500>; + opp-microvolt = <1212500 1212500 1500000>; clock-latency-ns = <140000>; }; opp-1600000000 { opp-hz = /bits/ 64 <1600000000>; - opp-microvolt = <1175000>; + opp-microvolt = <1175000 1175000 1500000>; clock-latency-ns = <140000>; }; opp-1500000000 { opp-hz = /bits/ 64 <1500000000>; - opp-microvolt = <1137500>; + opp-microvolt = <1137500 1137500 1500000>; clock-latency-ns = <140000>; }; opp-1400000000 { opp-hz = /bits/ 64 <1400000000>; - opp-microvolt = <1112500>; + opp-microvolt = <1112500 1112500 1500000>; clock-latency-ns = <140000>; }; opp-1300000000 { opp-hz = /bits/ 64 <1300000000>; - opp-microvolt = <1062500>; + opp-microvolt = <1062500 1062500 1500000>; clock-latency-ns = <140000>; }; opp-1200000000 { opp-hz = /bits/ 64 <1200000000>; - opp-microvolt = <1037500>; + opp-microvolt = <1037500 1037500 1500000>; clock-latency-ns = <140000>; }; opp-1100000000 { opp-hz = /bits/ 64 <1100000000>; - opp-microvolt = <1012500>; + opp-microvolt = <1012500 1012500 1500000>; clock-latency-ns = <140000>; }; opp-1000000000 { opp-hz = /bits/ 64 <1000000000>; - opp-microvolt = < 987500>; + opp-microvolt = < 987500 987500 1500000>; clock-latency-ns = <140000>; }; opp-900000000 { opp-hz = /bits/ 64 <900000000>; - opp-microvolt = < 962500>; + opp-microvolt = < 962500 962500 1500000>; clock-latency-ns = <140000>; }; opp-800000000 { opp-hz = /bits/ 64 <800000000>; - opp-microvolt = < 937500>; + opp-microvolt = < 937500 937500 1500000>; clock-latency-ns = <140000>; }; opp-700000000 { opp-hz = /bits/ 64 <700000000>; - opp-microvolt = < 912500>; + opp-microvolt = < 912500 912500 1500000>; clock-latency-ns = <140000>; }; }; @@ -175,7 +175,7 @@ }; clock: clock-controller@10010000 { - compatible = "samsung,exynos5420-clock"; + compatible = "samsung,exynos5420-clock", "syscon"; reg = <0x10010000 0x30000>; #clock-cells = <1>; }; @@ -237,6 +237,32 @@ status = "disabled"; }; + dmc: memory-controller@10c20000 { + compatible = "samsung,exynos5422-dmc"; + reg = <0x10c20000 0x10000>, <0x10c30000 0x10000>; + interrupt-parent = <&combiner>; + interrupts = <16 0>, <16 1>; + interrupt-names = "drex_0", "drex_1"; + clocks = <&clock CLK_FOUT_SPLL>, + <&clock CLK_MOUT_SCLK_SPLL>, + <&clock CLK_FF_DOUT_SPLL2>, + <&clock CLK_FOUT_BPLL>, + <&clock CLK_MOUT_BPLL>, + <&clock CLK_SCLK_BPLL>, + <&clock CLK_MOUT_MX_MSPLL_CCORE>, + <&clock CLK_MOUT_MCLK_CDREX>; + clock-names = "fout_spll", + "mout_sclk_spll", + "ff_dout_spll2", + "fout_bpll", + "mout_bpll", + "sclk_bpll", + "mout_mx_mspll_ccore", + "mout_mclk_cdrex"; + samsung,syscon-clk = <&clock>; + status = "disabled"; + }; + nocp_mem0_0: nocp@10ca1000 { compatible = "samsung,exynos5420-nocp"; reg = <0x10CA1000 0x200>; @@ -273,6 +299,54 @@ status = "disabled"; }; + ppmu_dmc0_0: ppmu@10d00000 { + compatible = "samsung,exynos-ppmu"; + reg = <0x10d00000 0x2000>; + clocks = <&clock CLK_PCLK_PPMU_DREX0_0>; + clock-names = "ppmu"; + events { + ppmu_event3_dmc0_0: ppmu-event3-dmc0_0 { + event-name = "ppmu-event3-dmc0_0"; + }; + }; + }; + + ppmu_dmc0_1: ppmu@10d10000 { + compatible = "samsung,exynos-ppmu"; + reg = <0x10d10000 0x2000>; + clocks = <&clock CLK_PCLK_PPMU_DREX0_1>; + clock-names = "ppmu"; + events { + ppmu_event3_dmc0_1: ppmu-event3-dmc0_1 { + event-name = "ppmu-event3-dmc0_1"; + }; + }; + }; + + ppmu_dmc1_0: ppmu@10d60000 { + compatible = "samsung,exynos-ppmu"; + reg = <0x10d60000 0x2000>; + clocks = <&clock CLK_PCLK_PPMU_DREX1_0>; + clock-names = "ppmu"; + events { + ppmu_event3_dmc1_0: ppmu-event3-dmc1_0 { + event-name = "ppmu-event3-dmc1_0"; + }; + }; + }; + + ppmu_dmc1_1: ppmu@10d70000 { + compatible = "samsung,exynos-ppmu"; + reg = <0x10d70000 0x2000>; + clocks = <&clock CLK_PCLK_PPMU_DREX1_1>; + clock-names = "ppmu"; + events { + ppmu_event3_dmc1_1: ppmu-event3-dmc1_1 { + event-name = "ppmu-event3-dmc1_1"; + }; + }; + }; + gsc_pd: power-domain@10044000 { compatible = "samsung,exynos4210-pd"; reg = <0x10044000 0x20>; @@ -294,11 +368,11 @@ label = "MFC"; }; - msc_pd: power-domain@10044120 { + g3d_pd: power-domain@10044080 { compatible = "samsung,exynos4210-pd"; - reg = <0x10044120 0x20>; + reg = <0x10044080 0x20>; #power-domain-cells = <0>; - label = "MSC"; + label = "G3D"; }; disp_pd: power-domain@100440c0 { @@ -315,6 +389,13 @@ label = "MAU"; }; + msc_pd: power-domain@10044120 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10044120 0x20>; + #power-domain-cells = <0>; + label = "MSC"; + }; + pinctrl_0: pinctrl@13400000 { compatible = "samsung,exynos5420-pinctrl"; reg = <0x13400000 0x1000>; @@ -427,9 +508,9 @@ i2s0: i2s@3830000 { compatible = "samsung,exynos5420-i2s"; reg = <0x03830000 0x100>; - dmas = <&adma 0 - &adma 2 - &adma 1>; + dmas = <&adma 0>, + <&adma 2>, + <&adma 1>; dma-names = "tx", "rx", "tx-sec"; clocks = <&clock_audss EXYNOS_I2S_BUS>, <&clock_audss EXYNOS_I2S_BUS>, @@ -448,8 +529,8 @@ i2s1: i2s@12d60000 { compatible = "samsung,exynos5420-i2s"; reg = <0x12D60000 0x100>; - dmas = <&pdma1 12 - &pdma1 11>; + dmas = <&pdma1 12>, + <&pdma1 11>; dma-names = "tx", "rx"; clocks = <&clock CLK_I2S1>, <&clock CLK_SCLK_I2S1>; clock-names = "iis", "i2s_opclk0"; @@ -464,8 +545,8 @@ i2s2: i2s@12d70000 { compatible = "samsung,exynos5420-i2s"; reg = <0x12D70000 0x100>; - dmas = <&pdma0 12 - &pdma0 11>; + dmas = <&pdma0 12>, + <&pdma0 11>; dma-names = "tx", "rx"; clocks = <&clock CLK_I2S2>, <&clock CLK_SCLK_I2S2>; clock-names = "iis", "i2s_opclk0"; @@ -663,6 +744,56 @@ iommus = <&sysmmu_gscl1>; }; + gpu: gpu@11800000 { + compatible = "samsung,exynos5420-mali", "arm,mali-t628"; + reg = <0x11800000 0x5000>; + interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "job", "mmu", "gpu"; + + clocks = <&clock CLK_G3D>; + clock-names = "core"; + power-domains = <&g3d_pd>; + operating-points-v2 = <&gpu_opp_table>; + + status = "disabled"; + #cooling-cells = <2>; + + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-177000000 { + opp-hz = /bits/ 64 <177000000>; + opp-microvolt = <812500>; + }; + opp-266000000 { + opp-hz = /bits/ 64 <266000000>; + opp-microvolt = <862500>; + }; + opp-350000000 { + opp-hz = /bits/ 64 <350000000>; + opp-microvolt = <912500>; + }; + opp-420000000 { + opp-hz = /bits/ 64 <420000000>; + opp-microvolt = <962500>; + }; + opp-480000000 { + opp-hz = /bits/ 64 <480000000>; + opp-microvolt = <1000000>; + }; + opp-543000000 { + opp-hz = /bits/ 64 <543000000>; + opp-microvolt = <1037500>; + }; + opp-600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <1150000>; + }; + }; + }; + scaler_0: scaler@12800000 { compatible = "samsung,exynos5420-scaler"; reg = <0x12800000 0x1294>; @@ -961,7 +1092,6 @@ compatible = "samsung,exynos-bus"; clocks = <&clock CLK_DOUT_ACLK400_WCORE>; clock-names = "bus"; - operating-points-v2 = <&bus_wcore_opp_table>; status = "disabled"; }; @@ -969,7 +1099,6 @@ compatible = "samsung,exynos-bus"; clocks = <&clock CLK_DOUT_ACLK100_NOC>; clock-names = "bus"; - operating-points-v2 = <&bus_noc_opp_table>; status = "disabled"; }; @@ -977,7 +1106,6 @@ compatible = "samsung,exynos-bus"; clocks = <&clock CLK_DOUT_PCLK200_FSYS>; clock-names = "bus"; - operating-points-v2 = <&bus_fsys_apb_opp_table>; status = "disabled"; }; @@ -985,7 +1113,6 @@ compatible = "samsung,exynos-bus"; clocks = <&clock CLK_DOUT_ACLK200_FSYS>; clock-names = "bus"; - operating-points-v2 = <&bus_fsys_apb_opp_table>; status = "disabled"; }; @@ -993,7 +1120,6 @@ compatible = "samsung,exynos-bus"; clocks = <&clock CLK_DOUT_ACLK200_FSYS2>; clock-names = "bus"; - operating-points-v2 = <&bus_fsys2_opp_table>; status = "disabled"; }; @@ -1001,7 +1127,6 @@ compatible = "samsung,exynos-bus"; clocks = <&clock CLK_DOUT_ACLK333>; clock-names = "bus"; - operating-points-v2 = <&bus_mfc_opp_table>; status = "disabled"; }; @@ -1009,7 +1134,6 @@ compatible = "samsung,exynos-bus"; clocks = <&clock CLK_DOUT_ACLK266>; clock-names = "bus"; - operating-points-v2 = <&bus_gen_opp_table>; status = "disabled"; }; @@ -1017,7 +1141,6 @@ compatible = "samsung,exynos-bus"; clocks = <&clock CLK_DOUT_ACLK66>; clock-names = "bus"; - operating-points-v2 = <&bus_peri_opp_table>; status = "disabled"; }; @@ -1025,7 +1148,6 @@ compatible = "samsung,exynos-bus"; clocks = <&clock CLK_DOUT_ACLK333_G2D>; clock-names = "bus"; - operating-points-v2 = <&bus_g2d_opp_table>; status = "disabled"; }; @@ -1033,7 +1155,6 @@ compatible = "samsung,exynos-bus"; clocks = <&clock CLK_DOUT_ACLK266_G2D>; clock-names = "bus"; - operating-points-v2 = <&bus_g2d_acp_opp_table>; status = "disabled"; }; @@ -1041,7 +1162,6 @@ compatible = "samsung,exynos-bus"; clocks = <&clock CLK_DOUT_ACLK300_JPEG>; clock-names = "bus"; - operating-points-v2 = <&bus_jpeg_opp_table>; status = "disabled"; }; @@ -1049,7 +1169,6 @@ compatible = "samsung,exynos-bus"; clocks = <&clock CLK_DOUT_ACLK166>; clock-names = "bus"; - operating-points-v2 = <&bus_jpeg_apb_opp_table>; status = "disabled"; }; @@ -1057,7 +1176,6 @@ compatible = "samsung,exynos-bus"; clocks = <&clock CLK_DOUT_ACLK300_DISP1>; clock-names = "bus"; - operating-points-v2 = <&bus_disp1_fimd_opp_table>; status = "disabled"; }; @@ -1065,7 +1183,6 @@ compatible = "samsung,exynos-bus"; clocks = <&clock CLK_DOUT_ACLK400_DISP1>; clock-names = "bus"; - operating-points-v2 = <&bus_disp1_opp_table>; status = "disabled"; }; @@ -1073,7 +1190,6 @@ compatible = "samsung,exynos-bus"; clocks = <&clock CLK_DOUT_ACLK300_GSCL>; clock-names = "bus"; - operating-points-v2 = <&bus_gscl_opp_table>; status = "disabled"; }; @@ -1081,252 +1197,8 @@ compatible = "samsung,exynos-bus"; clocks = <&clock CLK_DOUT_ACLK400_MSCL>; clock-names = "bus"; - operating-points-v2 = <&bus_mscl_opp_table>; status = "disabled"; }; - - bus_wcore_opp_table: opp_table2 { - compatible = "operating-points-v2"; - - opp00 { - opp-hz = /bits/ 64 <84000000>; - opp-microvolt = <925000>; - }; - opp01 { - opp-hz = /bits/ 64 <111000000>; - opp-microvolt = <950000>; - }; - opp02 { - opp-hz = /bits/ 64 <222000000>; - opp-microvolt = <950000>; - }; - opp03 { - opp-hz = /bits/ 64 <333000000>; - opp-microvolt = <950000>; - }; - opp04 { - opp-hz = /bits/ 64 <400000000>; - opp-microvolt = <987500>; - }; - }; - - bus_noc_opp_table: opp_table3 { - compatible = "operating-points-v2"; - - opp00 { - opp-hz = /bits/ 64 <67000000>; - }; - opp01 { - opp-hz = /bits/ 64 <75000000>; - }; - opp02 { - opp-hz = /bits/ 64 <86000000>; - }; - opp03 { - opp-hz = /bits/ 64 <100000000>; - }; - }; - - bus_fsys_apb_opp_table: opp_table4 { - compatible = "operating-points-v2"; - opp-shared; - - opp00 { - opp-hz = /bits/ 64 <100000000>; - }; - opp01 { - opp-hz = /bits/ 64 <200000000>; - }; - }; - - bus_fsys2_opp_table: opp_table5 { - compatible = "operating-points-v2"; - - opp00 { - opp-hz = /bits/ 64 <75000000>; - }; - opp01 { - opp-hz = /bits/ 64 <100000000>; - }; - opp02 { - opp-hz = /bits/ 64 <150000000>; - }; - }; - - bus_mfc_opp_table: opp_table6 { - compatible = "operating-points-v2"; - - opp00 { - opp-hz = /bits/ 64 <96000000>; - }; - opp01 { - opp-hz = /bits/ 64 <111000000>; - }; - opp02 { - opp-hz = /bits/ 64 <167000000>; - }; - opp03 { - opp-hz = /bits/ 64 <222000000>; - }; - opp04 { - opp-hz = /bits/ 64 <333000000>; - }; - }; - - bus_gen_opp_table: opp_table7 { - compatible = "operating-points-v2"; - - opp00 { - opp-hz = /bits/ 64 <89000000>; - }; - opp01 { - opp-hz = /bits/ 64 <133000000>; - }; - opp02 { - opp-hz = /bits/ 64 <178000000>; - }; - opp03 { - opp-hz = /bits/ 64 <267000000>; - }; - }; - - bus_peri_opp_table: opp_table8 { - compatible = "operating-points-v2"; - - opp00 { - opp-hz = /bits/ 64 <67000000>; - }; - }; - - bus_g2d_opp_table: opp_table9 { - compatible = "operating-points-v2"; - - opp00 { - opp-hz = /bits/ 64 <84000000>; - }; - opp01 { - opp-hz = /bits/ 64 <167000000>; - }; - opp02 { - opp-hz = /bits/ 64 <222000000>; - }; - opp03 { - opp-hz = /bits/ 64 <300000000>; - }; - opp04 { - opp-hz = /bits/ 64 <333000000>; - }; - }; - - bus_g2d_acp_opp_table: opp_table10 { - compatible = "operating-points-v2"; - - opp00 { - opp-hz = /bits/ 64 <67000000>; - }; - opp01 { - opp-hz = /bits/ 64 <133000000>; - }; - opp02 { - opp-hz = /bits/ 64 <178000000>; - }; - opp03 { - opp-hz = /bits/ 64 <267000000>; - }; - }; - - bus_jpeg_opp_table: opp_table11 { - compatible = "operating-points-v2"; - - opp00 { - opp-hz = /bits/ 64 <75000000>; - }; - opp01 { - opp-hz = /bits/ 64 <150000000>; - }; - opp02 { - opp-hz = /bits/ 64 <200000000>; - }; - opp03 { - opp-hz = /bits/ 64 <300000000>; - }; - }; - - bus_jpeg_apb_opp_table: opp_table12 { - compatible = "operating-points-v2"; - - opp00 { - opp-hz = /bits/ 64 <84000000>; - }; - opp01 { - opp-hz = /bits/ 64 <111000000>; - }; - opp02 { - opp-hz = /bits/ 64 <134000000>; - }; - opp03 { - opp-hz = /bits/ 64 <167000000>; - }; - }; - - bus_disp1_fimd_opp_table: opp_table13 { - compatible = "operating-points-v2"; - - opp00 { - opp-hz = /bits/ 64 <120000000>; - }; - opp01 { - opp-hz = /bits/ 64 <200000000>; - }; - }; - - bus_disp1_opp_table: opp_table14 { - compatible = "operating-points-v2"; - - opp00 { - opp-hz = /bits/ 64 <120000000>; - }; - opp01 { - opp-hz = /bits/ 64 <200000000>; - }; - opp02 { - opp-hz = /bits/ 64 <300000000>; - }; - }; - - bus_gscl_opp_table: opp_table15 { - compatible = "operating-points-v2"; - - opp00 { - opp-hz = /bits/ 64 <150000000>; - }; - opp01 { - opp-hz = /bits/ 64 <200000000>; - }; - opp02 { - opp-hz = /bits/ 64 <300000000>; - }; - }; - - bus_mscl_opp_table: opp_table16 { - compatible = "operating-points-v2"; - - opp00 { - opp-hz = /bits/ 64 <84000000>; - }; - opp01 { - opp-hz = /bits/ 64 <167000000>; - }; - opp02 { - opp-hz = /bits/ 64 <222000000>; - }; - opp03 { - opp-hz = /bits/ 64 <333000000>; - }; - opp04 { - opp-hz = /bits/ 64 <400000000>; - }; - }; }; thermal-zones { diff --git a/arch/arm/boot/dts/exynos5422-cpus.dtsi b/arch/arm/boot/dts/exynos5422-cpus.dtsi index e4a5857c135f..1b8605cf2407 100644 --- a/arch/arm/boot/dts/exynos5422-cpus.dtsi +++ b/arch/arm/boot/dts/exynos5422-cpus.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * SAMSUNG EXYNOS5422 SoC cpu device tree source + * Samsung Exynos5422 SoC cpu device tree source * * Copyright (c) 2015 Samsung Electronics Co., Ltd. * http://www.samsung.com diff --git a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi index 829147e320e0..5cf1aed20490 100644 --- a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi @@ -34,6 +34,355 @@ clock-frequency = <24000000>; }; }; + + bus_wcore_opp_table: opp_table2 { + compatible = "operating-points-v2"; + + /* derived from 532MHz MPLL */ + opp00 { + opp-hz = /bits/ 64 <88700000>; + opp-microvolt = <925000 925000 1400000>; + }; + opp01 { + opp-hz = /bits/ 64 <133000000>; + opp-microvolt = <950000 950000 1400000>; + }; + opp02 { + opp-hz = /bits/ 64 <177400000>; + opp-microvolt = <950000 950000 1400000>; + }; + opp03 { + opp-hz = /bits/ 64 <266000000>; + opp-microvolt = <950000 950000 1400000>; + }; + opp04 { + opp-hz = /bits/ 64 <532000000>; + opp-microvolt = <1000000 1000000 1400000>; + }; + }; + + bus_noc_opp_table: opp_table3 { + compatible = "operating-points-v2"; + + /* derived from 666MHz CPLL */ + opp00 { + opp-hz = /bits/ 64 <66600000>; + }; + opp01 { + opp-hz = /bits/ 64 <74000000>; + }; + opp02 { + opp-hz = /bits/ 64 <83250000>; + }; + opp03 { + opp-hz = /bits/ 64 <111000000>; + }; + }; + + bus_fsys_apb_opp_table: opp_table4 { + compatible = "operating-points-v2"; + + /* derived from 666MHz CPLL */ + opp00 { + opp-hz = /bits/ 64 <111000000>; + }; + opp01 { + opp-hz = /bits/ 64 <222000000>; + }; + }; + + bus_fsys2_opp_table: opp_table5 { + compatible = "operating-points-v2"; + + /* derived from 600MHz DPLL */ + opp00 { + opp-hz = /bits/ 64 <75000000>; + }; + opp01 { + opp-hz = /bits/ 64 <120000000>; + }; + opp02 { + opp-hz = /bits/ 64 <200000000>; + }; + }; + + bus_mfc_opp_table: opp_table6 { + compatible = "operating-points-v2"; + + /* derived from 666MHz CPLL */ + opp00 { + opp-hz = /bits/ 64 <83250000>; + }; + opp01 { + opp-hz = /bits/ 64 <111000000>; + }; + opp02 { + opp-hz = /bits/ 64 <166500000>; + }; + opp03 { + opp-hz = /bits/ 64 <222000000>; + }; + opp04 { + opp-hz = /bits/ 64 <333000000>; + }; + }; + + bus_gen_opp_table: opp_table7 { + compatible = "operating-points-v2"; + + /* derived from 532MHz MPLL */ + opp00 { + opp-hz = /bits/ 64 <88700000>; + }; + opp01 { + opp-hz = /bits/ 64 <133000000>; + }; + opp02 { + opp-hz = /bits/ 64 <178000000>; + }; + opp03 { + opp-hz = /bits/ 64 <266000000>; + }; + }; + + bus_peri_opp_table: opp_table8 { + compatible = "operating-points-v2"; + + /* derived from 666MHz CPLL */ + opp00 { + opp-hz = /bits/ 64 <66600000>; + }; + }; + + bus_g2d_opp_table: opp_table9 { + compatible = "operating-points-v2"; + + /* derived from 666MHz CPLL */ + opp00 { + opp-hz = /bits/ 64 <83250000>; + }; + opp01 { + opp-hz = /bits/ 64 <111000000>; + }; + opp02 { + opp-hz = /bits/ 64 <166500000>; + }; + opp03 { + opp-hz = /bits/ 64 <222000000>; + }; + opp04 { + opp-hz = /bits/ 64 <333000000>; + }; + }; + + bus_g2d_acp_opp_table: opp_table10 { + compatible = "operating-points-v2"; + + /* derived from 532MHz MPLL */ + opp00 { + opp-hz = /bits/ 64 <66500000>; + }; + opp01 { + opp-hz = /bits/ 64 <133000000>; + }; + opp02 { + opp-hz = /bits/ 64 <178000000>; + }; + opp03 { + opp-hz = /bits/ 64 <266000000>; + }; + }; + + bus_jpeg_opp_table: opp_table11 { + compatible = "operating-points-v2"; + + /* derived from 600MHz DPLL */ + opp00 { + opp-hz = /bits/ 64 <75000000>; + }; + opp01 { + opp-hz = /bits/ 64 <150000000>; + }; + opp02 { + opp-hz = /bits/ 64 <200000000>; + }; + opp03 { + opp-hz = /bits/ 64 <300000000>; + }; + }; + + bus_jpeg_apb_opp_table: opp_table12 { + compatible = "operating-points-v2"; + + /* derived from 666MHz CPLL */ + opp00 { + opp-hz = /bits/ 64 <83250000>; + }; + opp01 { + opp-hz = /bits/ 64 <111000000>; + }; + opp02 { + opp-hz = /bits/ 64 <133000000>; + }; + opp03 { + opp-hz = /bits/ 64 <166500000>; + }; + }; + + bus_disp1_fimd_opp_table: opp_table13 { + compatible = "operating-points-v2"; + + /* derived from 600MHz DPLL */ + opp00 { + opp-hz = /bits/ 64 <120000000>; + }; + opp01 { + opp-hz = /bits/ 64 <200000000>; + }; + }; + + bus_disp1_opp_table: opp_table14 { + compatible = "operating-points-v2"; + + /* derived from 600MHz DPLL */ + opp00 { + opp-hz = /bits/ 64 <120000000>; + }; + opp01 { + opp-hz = /bits/ 64 <200000000>; + }; + opp02 { + opp-hz = /bits/ 64 <300000000>; + }; + }; + + bus_gscl_opp_table: opp_table15 { + compatible = "operating-points-v2"; + + /* derived from 600MHz DPLL */ + opp00 { + opp-hz = /bits/ 64 <150000000>; + }; + opp01 { + opp-hz = /bits/ 64 <200000000>; + }; + opp02 { + opp-hz = /bits/ 64 <300000000>; + }; + }; + + bus_mscl_opp_table: opp_table16 { + compatible = "operating-points-v2"; + + /* derived from 666MHz CPLL */ + opp00 { + opp-hz = /bits/ 64 <84000000>; + }; + opp01 { + opp-hz = /bits/ 64 <167000000>; + }; + opp02 { + opp-hz = /bits/ 64 <222000000>; + }; + opp03 { + opp-hz = /bits/ 64 <333000000>; + }; + opp04 { + opp-hz = /bits/ 64 <666000000>; + }; + }; + + dmc_opp_table: opp_table17 { + compatible = "operating-points-v2"; + + opp00 { + opp-hz = /bits/ 64 <165000000>; + opp-microvolt = <875000>; + }; + opp01 { + opp-hz = /bits/ 64 <206000000>; + opp-microvolt = <875000>; + }; + opp02 { + opp-hz = /bits/ 64 <275000000>; + opp-microvolt = <875000>; + }; + opp03 { + opp-hz = /bits/ 64 <413000000>; + opp-microvolt = <887500>; + }; + opp04 { + opp-hz = /bits/ 64 <543000000>; + opp-microvolt = <937500>; + }; + opp05 { + opp-hz = /bits/ 64 <633000000>; + opp-microvolt = <1012500>; + }; + opp06 { + opp-hz = /bits/ 64 <728000000>; + opp-microvolt = <1037500>; + }; + opp07 { + opp-hz = /bits/ 64 <825000000>; + opp-microvolt = <1050000>; + }; + }; + + samsung_K3QF2F20DB: lpddr3 { + compatible = "samsung,K3QF2F20DB", "jedec,lpddr3"; + density = <16384>; + io-width = <32>; + #address-cells = <1>; + #size-cells = <0>; + + tRFC-min-tck = <17>; + tRRD-min-tck = <2>; + tRPab-min-tck = <2>; + tRPpb-min-tck = <2>; + tRCD-min-tck = <3>; + tRC-min-tck = <6>; + tRAS-min-tck = <5>; + tWTR-min-tck = <2>; + tWR-min-tck = <7>; + tRTP-min-tck = <2>; + tW2W-C2C-min-tck = <0>; + tR2R-C2C-min-tck = <0>; + tWL-min-tck = <8>; + tDQSCK-min-tck = <5>; + tRL-min-tck = <14>; + tFAW-min-tck = <5>; + tXSR-min-tck = <12>; + tXP-min-tck = <2>; + tCKE-min-tck = <2>; + tCKESR-min-tck = <2>; + tMRD-min-tck = <5>; + + timings_samsung_K3QF2F20DB_800mhz: lpddr3-timings@800000000 { + compatible = "jedec,lpddr3-timings"; + /* workaround: 'reg' shows max-freq */ + reg = <800000000>; + min-freq = <100000000>; + tRFC = <65000>; + tRRD = <6000>; + tRPab = <12000>; + tRPpb = <12000>; + tRCD = <10000>; + tRC = <33750>; + tRAS = <23000>; + tWTR = <3750>; + tWR = <7500>; + tRTP = <3750>; + tW2W-C2C = <0>; + tR2R-C2C = <0>; + tFAW = <25000>; + tXSR = <70000>; + tXP = <3750>; + tCKE = <3750>; + tCKESR = <3750>; + tMRD = <7000>; + }; + }; }; &adc { @@ -42,6 +391,7 @@ }; &bus_wcore { + operating-points-v2 = <&bus_wcore_opp_table>; devfreq-events = <&nocp_mem0_0>, <&nocp_mem0_1>, <&nocp_mem1_0>, <&nocp_mem1_1>; vdd-supply = <&buck3_reg>; @@ -50,76 +400,91 @@ }; &bus_noc { + operating-points-v2 = <&bus_noc_opp_table>; devfreq = <&bus_wcore>; status = "okay"; }; &bus_fsys_apb { + operating-points-v2 = <&bus_fsys_apb_opp_table>; devfreq = <&bus_wcore>; status = "okay"; }; &bus_fsys { + operating-points-v2 = <&bus_fsys2_opp_table>; devfreq = <&bus_wcore>; status = "okay"; }; &bus_fsys2 { + operating-points-v2 = <&bus_fsys2_opp_table>; devfreq = <&bus_wcore>; status = "okay"; }; &bus_mfc { + operating-points-v2 = <&bus_mfc_opp_table>; devfreq = <&bus_wcore>; status = "okay"; }; &bus_gen { + operating-points-v2 = <&bus_gen_opp_table>; devfreq = <&bus_wcore>; status = "okay"; }; &bus_peri { + operating-points-v2 = <&bus_peri_opp_table>; devfreq = <&bus_wcore>; status = "okay"; }; &bus_g2d { + operating-points-v2 = <&bus_g2d_opp_table>; devfreq = <&bus_wcore>; status = "okay"; }; &bus_g2d_acp { + operating-points-v2 = <&bus_g2d_acp_opp_table>; devfreq = <&bus_wcore>; status = "okay"; }; &bus_jpeg { + operating-points-v2 = <&bus_jpeg_opp_table>; devfreq = <&bus_wcore>; status = "okay"; }; &bus_jpeg_apb { + operating-points-v2 = <&bus_jpeg_apb_opp_table>; devfreq = <&bus_wcore>; status = "okay"; }; &bus_disp1_fimd { + operating-points-v2 = <&bus_disp1_fimd_opp_table>; devfreq = <&bus_wcore>; status = "okay"; }; &bus_disp1 { + operating-points-v2 = <&bus_disp1_opp_table>; devfreq = <&bus_wcore>; status = "okay"; }; &bus_gscl_scaler { + operating-points-v2 = <&bus_gscl_opp_table>; devfreq = <&bus_wcore>; status = "okay"; }; &bus_mscl { + operating-points-v2 = <&bus_mscl_opp_table>; devfreq = <&bus_wcore>; status = "okay"; }; @@ -132,6 +497,15 @@ cpu-supply = <&buck2_reg>; }; +&dmc { + devfreq-events = <&ppmu_event3_dmc0_0>, <&ppmu_event3_dmc0_1>, + <&ppmu_event3_dmc1_0>, <&ppmu_event3_dmc1_1>; + device-handle = <&samsung_K3QF2F20DB>; + operating-points-v2 = <&dmc_opp_table>; + vdd-supply = <&buck1_reg>; + status = "okay"; +}; + &hsi2c_4 { status = "okay"; @@ -500,6 +874,8 @@ regulator-max-microvolt = <1500000>; regulator-always-on; regulator-boot-on; + regulator-coupled-with = <&buck3_reg>; + regulator-coupled-max-spread = <300000>; regulator-state-mem { regulator-off-in-suspend; @@ -512,6 +888,8 @@ regulator-max-microvolt = <1400000>; regulator-always-on; regulator-boot-on; + regulator-coupled-with = <&buck2_reg>; + regulator-coupled-max-spread = <300000>; regulator-state-mem { regulator-off-in-suspend; @@ -522,7 +900,6 @@ regulator-name = "vdd_g3d"; regulator-min-microvolt = <800000>; regulator-max-microvolt = <1400000>; - regulator-always-on; regulator-boot-on; regulator-state-mem { @@ -634,6 +1011,22 @@ }; }; +&ppmu_dmc0_0 { + status = "okay"; +}; + +&ppmu_dmc0_1 { + status = "okay"; +}; + +&ppmu_dmc1_0 { + status = "okay"; +}; + +&ppmu_dmc1_1 { + status = "okay"; +}; + &tmu_cpu0 { vtmu-supply = <&ldo7_reg>; }; @@ -654,6 +1047,11 @@ vtmu-supply = <&ldo7_reg>; }; +&gpu { + mali-supply = <&buck4_reg>; + status = "okay"; +}; + &rtc { status = "okay"; clocks = <&clock CLK_RTC>, <&s2mps11_osc S2MPS11_CLK_AP>; diff --git a/arch/arm/boot/dts/exynos5422-odroidhc1.dts b/arch/arm/boot/dts/exynos5422-odroidhc1.dts index d271e7548826..f163206265bb 100644 --- a/arch/arm/boot/dts/exynos5422-odroidhc1.dts +++ b/arch/arm/boot/dts/exynos5422-odroidhc1.dts @@ -72,14 +72,14 @@ */ map1 { trip = <&cpu0_alert1>; - cooling-device = <&cpu0 3 7>, - <&cpu1 3 7>, - <&cpu2 3 7>, - <&cpu3 3 7>, - <&cpu4 3 12>, - <&cpu5 3 12>, - <&cpu6 3 12>, - <&cpu7 3 12>; + cooling-device = <&cpu0 3 8>, + <&cpu1 3 8>, + <&cpu2 3 8>, + <&cpu3 3 8>, + <&cpu4 3 14>, + <&cpu5 3 14>, + <&cpu6 3 14>, + <&cpu7 3 14>; }; }; }; @@ -116,14 +116,14 @@ }; map1 { trip = <&cpu1_alert1>; - cooling-device = <&cpu0 3 7>, - <&cpu1 3 7>, - <&cpu2 3 7>, - <&cpu3 3 7>, - <&cpu4 3 12>, - <&cpu5 3 12>, - <&cpu6 3 12>, - <&cpu7 3 12>; + cooling-device = <&cpu0 3 8>, + <&cpu1 3 8>, + <&cpu2 3 8>, + <&cpu3 3 8>, + <&cpu4 3 14>, + <&cpu5 3 14>, + <&cpu6 3 14>, + <&cpu7 3 14>; }; }; }; @@ -160,14 +160,14 @@ }; map1 { trip = <&cpu2_alert1>; - cooling-device = <&cpu0 3 7>, - <&cpu1 3 7>, - <&cpu2 3 7>, - <&cpu3 3 7>, - <&cpu4 3 12>, - <&cpu5 3 12>, - <&cpu6 3 12>, - <&cpu7 3 12>; + cooling-device = <&cpu0 3 8>, + <&cpu1 3 8>, + <&cpu2 3 8>, + <&cpu3 3 8>, + <&cpu4 3 14>, + <&cpu5 3 14>, + <&cpu6 3 14>, + <&cpu7 3 14>; }; }; }; @@ -204,14 +204,14 @@ }; map1 { trip = <&cpu3_alert1>; - cooling-device = <&cpu0 3 7>, - <&cpu1 3 7>, - <&cpu2 3 7>, - <&cpu3 3 7>, - <&cpu4 3 12>, - <&cpu5 3 12>, - <&cpu6 3 12>, - <&cpu7 3 12>; + cooling-device = <&cpu0 3 8>, + <&cpu1 3 8>, + <&cpu2 3 8>, + <&cpu3 3 8>, + <&cpu4 3 14>, + <&cpu5 3 14>, + <&cpu6 3 14>, + <&cpu7 3 14>; }; }; }; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi index 838872037493..1865a708b49f 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi @@ -107,7 +107,7 @@ /* * When reaching cpu0_alert3, reduce CPU * by 2 steps. On Exynos5422/5800 that would - * be: 1600 MHz and 1100 MHz. + * (usually) be: 1800 MHz and 1200 MHz. */ map3 { trip = <&cpu0_alert3>; @@ -122,19 +122,19 @@ }; /* * When reaching cpu0_alert4, reduce CPU - * further, down to 600 MHz (12 steps for big, - * 7 steps for LITTLE). + * further, down to 600 MHz (14 steps for big, + * 8 steps for LITTLE). */ - map4 { + cpu0_cooling_map4: map4 { trip = <&cpu0_alert4>; - cooling-device = <&cpu0 3 7>, - <&cpu1 3 7>, - <&cpu2 3 7>, - <&cpu3 3 7>, - <&cpu4 3 12>, - <&cpu5 3 12>, - <&cpu6 3 12>, - <&cpu7 3 12>; + cooling-device = <&cpu0 3 8>, + <&cpu1 3 8>, + <&cpu2 3 8>, + <&cpu3 3 8>, + <&cpu4 3 14>, + <&cpu5 3 14>, + <&cpu6 3 14>, + <&cpu7 3 14>; }; }; }; @@ -198,16 +198,16 @@ <&cpu6 0 2>, <&cpu7 0 2>; }; - map4 { + cpu1_cooling_map4: map4 { trip = <&cpu1_alert4>; - cooling-device = <&cpu0 3 7>, - <&cpu1 3 7>, - <&cpu2 3 7>, - <&cpu3 3 7>, - <&cpu4 3 12>, - <&cpu5 3 12>, - <&cpu6 3 12>, - <&cpu7 3 12>; + cooling-device = <&cpu0 3 8>, + <&cpu1 3 8>, + <&cpu2 3 8>, + <&cpu3 3 8>, + <&cpu4 3 14>, + <&cpu5 3 14>, + <&cpu6 3 14>, + <&cpu7 3 14>; }; }; }; @@ -271,16 +271,16 @@ <&cpu6 0 2>, <&cpu7 0 2>; }; - map4 { + cpu2_cooling_map4: map4 { trip = <&cpu2_alert4>; - cooling-device = <&cpu0 3 7>, - <&cpu1 3 7>, - <&cpu2 3 7>, - <&cpu3 3 7>, - <&cpu4 3 12>, - <&cpu5 3 12>, - <&cpu6 3 12>, - <&cpu7 3 12>; + cooling-device = <&cpu0 3 8>, + <&cpu1 3 8>, + <&cpu2 3 8>, + <&cpu3 3 8>, + <&cpu4 3 14>, + <&cpu5 3 14>, + <&cpu6 3 14>, + <&cpu7 3 14>; }; }; }; @@ -344,16 +344,16 @@ <&cpu6 0 2>, <&cpu7 0 2>; }; - map4 { + cpu3_cooling_map4: map4 { trip = <&cpu3_alert4>; - cooling-device = <&cpu0 3 7>, - <&cpu1 3 7>, - <&cpu2 3 7>, - <&cpu3 3 7>, - <&cpu4 3 12>, - <&cpu5 3 12>, - <&cpu6 3 12>, - <&cpu7 3 12>; + cooling-device = <&cpu0 3 8>, + <&cpu1 3 8>, + <&cpu2 3 8>, + <&cpu3 3 8>, + <&cpu4 3 14>, + <&cpu5 3 14>, + <&cpu6 3 14>, + <&cpu7 3 14>; }; }; }; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts index c19b5a51ca44..98feecad5489 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts @@ -26,6 +26,68 @@ status = "disabled"; }; +&chipid { + samsung,asv-bin = <2>; +}; + +/* + * Odroid XU3-Lite board uses SoC revision with lower maximum frequencies + * than Odroid XU3/XU4 boards: 1.8 GHz for A15 cores & 1.3 GHz for A7 cores. + * Therefore we need to update OPPs tables and thermal maps accordingly. + */ +&cluster_a15_opp_table { + /delete-node/opp-2000000000; + /delete-node/opp-1900000000; +}; + +&cluster_a7_opp_table { + /delete-node/opp-1400000000; +}; + +&cpu0_cooling_map4 { + cooling-device = <&cpu0 3 7>, + <&cpu1 3 7>, + <&cpu2 3 7>, + <&cpu3 3 7>, + <&cpu4 3 12>, + <&cpu5 3 12>, + <&cpu6 3 12>, + <&cpu7 3 12>; +}; + +&cpu1_cooling_map4 { + cooling-device = <&cpu0 3 7>, + <&cpu1 3 7>, + <&cpu2 3 7>, + <&cpu3 3 7>, + <&cpu4 3 12>, + <&cpu5 3 12>, + <&cpu6 3 12>, + <&cpu7 3 12>; +}; + +&cpu2_cooling_map4 { + cooling-device = <&cpu0 3 7>, + <&cpu1 3 7>, + <&cpu2 3 7>, + <&cpu3 3 7>, + <&cpu4 3 12>, + <&cpu5 3 12>, + <&cpu6 3 12>, + <&cpu7 3 12>; +}; + +&cpu3_cooling_map4 { + cooling-device = <&cpu0 3 7>, + <&cpu1 3 7>, + <&cpu2 3 7>, + <&cpu3 3 7>, + <&cpu4 3 12>, + <&cpu5 3 12>, + <&cpu6 3 12>, + <&cpu7 3 12>; +}; + &pwm { /* * PWM 0 -- fan diff --git a/arch/arm/boot/dts/exynos54xx.dtsi b/arch/arm/boot/dts/exynos54xx.dtsi index 0b27bebf9528..8aa5117e58ce 100644 --- a/arch/arm/boot/dts/exynos54xx.dtsi +++ b/arch/arm/boot/dts/exynos54xx.dtsi @@ -45,49 +45,49 @@ status = "disabled"; }; + timer: timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + clock-frequency = <24000000>; + }; + soc: soc { - sysram@2020000 { + sram@2020000 { compatible = "mmio-sram"; reg = <0x02020000 0x54000>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x02020000 0x54000>; - smp-sysram@0 { + smp-sram@0 { compatible = "samsung,exynos4210-sysram"; reg = <0x0 0x1000>; }; - smp-sysram@53000 { + smp-sram@53000 { compatible = "samsung,exynos4210-sysram-ns"; reg = <0x53000 0x1000>; }; }; - mct: mct@101c0000 { + mct: timer@101c0000 { compatible = "samsung,exynos4210-mct"; reg = <0x101c0000 0xb00>; - interrupt-parent = <&mct_map>; - interrupts = <0>, <1>, <2>, <3>, <4>, <5>, <6>, <7>, - <8>, <9>, <10>, <11>; - - mct_map: mct-map { - #interrupt-cells = <1>; - #address-cells = <0>; - #size-cells = <0>; - interrupt-map = <0 &combiner 23 3>, - <1 &combiner 23 4>, - <2 &combiner 25 2>, - <3 &combiner 25 3>, - <4 &gic 0 120 IRQ_TYPE_LEVEL_HIGH>, - <5 &gic 0 121 IRQ_TYPE_LEVEL_HIGH>, - <6 &gic 0 122 IRQ_TYPE_LEVEL_HIGH>, - <7 &gic 0 123 IRQ_TYPE_LEVEL_HIGH>, - <8 &gic 0 128 IRQ_TYPE_LEVEL_HIGH>, - <9 &gic 0 129 IRQ_TYPE_LEVEL_HIGH>, - <10 &gic 0 130 IRQ_TYPE_LEVEL_HIGH>, - <11 &gic 0 131 IRQ_TYPE_LEVEL_HIGH>; - }; + interrupts-extended = <&combiner 23 3>, + <&combiner 23 4>, + <&combiner 25 2>, + <&combiner 25 3>, + <&gic GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; }; watchdog: watchdog@101d0000 { @@ -189,26 +189,16 @@ compatible = "samsung,exynos4210-ehci"; reg = <0x12110000 0x100>; interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; - - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; - phys = <&usb2_phy 1>; - }; + phys = <&usb2_phy 1>; + phy-names = "host"; }; usbhost1: usb@12120000 { compatible = "samsung,exynos4210-ohci"; reg = <0x12120000 0x100>; interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; - - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; - phys = <&usb2_phy 1>; - }; + phys = <&usb2_phy 1>; + phy-names = "host"; }; usb2_phy: phy@12130000 { diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts index e0f470fe54c8..60ab0effe474 100644 --- a/arch/arm/boot/dts/exynos5800-peach-pi.dts +++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts @@ -156,6 +156,15 @@ assigned-clock-parents = <&clock CLK_MAU_EPLL>; }; +/* + * Peach Pi board uses SoC revision with lower maximum frequency for A7 cores + * (1.3 GHz instead of 1.4 GHz) than Odroid XU3/XU4 boards. Thus we need to + * update A7 OPPs table accordingly. + */ +&cluster_a7_opp_table { + /delete-node/opp-1400000000; +}; + &cpu0 { cpu-supply = <&buck2_reg>; }; @@ -257,6 +266,8 @@ regulator-always-on; regulator-boot-on; regulator-ramp-delay = <12500>; + regulator-coupled-with = <&buck3_reg>; + regulator-coupled-max-spread = <300000>; regulator-state-mem { regulator-off-in-suspend; }; @@ -269,6 +280,8 @@ regulator-always-on; regulator-boot-on; regulator-ramp-delay = <12500>; + regulator-coupled-with = <&buck2_reg>; + regulator-coupled-max-spread = <300000>; regulator-state-mem { regulator-off-in-suspend; }; @@ -440,6 +453,7 @@ regulator-name = "vdd_ldo10"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-always-on; regulator-state-mem { regulator-off-in-suspend; }; @@ -1033,6 +1047,10 @@ status = "okay"; }; +&timer { + arm,cpu-registers-not-fw-configured; +}; + &tmu_cpu0 { vtmu-supply = <&ldo10_reg>; }; diff --git a/arch/arm/boot/dts/exynos5800.dtsi b/arch/arm/boot/dts/exynos5800.dtsi index 57d3b319fd65..dfb99ab53c3e 100644 --- a/arch/arm/boot/dts/exynos5800.dtsi +++ b/arch/arm/boot/dts/exynos5800.dtsi @@ -1,12 +1,12 @@ // SPDX-License-Identifier: GPL-2.0 /* - * SAMSUNG EXYNOS5800 SoC device tree source + * Samsung Exynos5800 SoC device tree source * * Copyright (c) 2014 Samsung Electronics Co., Ltd. * http://www.samsung.com * - * SAMSUNG EXYNOS5800 SoC device nodes are listed in this file. - * EXYNOS5800 based board files can include this file and provide + * Samsung Exynos5800 SoC device nodes are listed in this file. + * Exynos5800 based board files can include this file and provide * values for board specfic bindings. */ @@ -17,71 +17,91 @@ }; &clock { - compatible = "samsung,exynos5800-clock"; + compatible = "samsung,exynos5800-clock", "syscon"; }; &cluster_a15_opp_table { + opp-2000000000 { + opp-hz = /bits/ 64 <2000000000>; + opp-microvolt = <1312500>; + clock-latency-ns = <140000>; + }; + opp-1900000000 { + opp-hz = /bits/ 64 <1900000000>; + opp-microvolt = <1262500>; + clock-latency-ns = <140000>; + }; + opp-1800000000 { + opp-hz = /bits/ 64 <1800000000>; + opp-microvolt = <1237500>; + clock-latency-ns = <140000>; + }; opp-1700000000 { - opp-microvolt = <1250000>; + opp-microvolt = <1250000 1250000 1500000>; }; opp-1600000000 { - opp-microvolt = <1250000>; + opp-microvolt = <1250000 1250000 1500000>; }; opp-1500000000 { - opp-microvolt = <1100000>; + opp-microvolt = <1100000 1100000 1500000>; }; opp-1400000000 { - opp-microvolt = <1100000>; + opp-microvolt = <1100000 1100000 1500000>; }; opp-1300000000 { - opp-microvolt = <1100000>; + opp-microvolt = <1100000 1100000 1500000>; }; opp-1200000000 { - opp-microvolt = <1000000>; + opp-microvolt = <1000000 1000000 1500000>; }; opp-1100000000 { - opp-microvolt = <1000000>; + opp-microvolt = <1000000 1000000 1500000>; }; opp-1000000000 { - opp-microvolt = <1000000>; + opp-microvolt = <1000000 1000000 1500000>; }; opp-900000000 { - opp-microvolt = <1000000>; + opp-microvolt = <1000000 1000000 1500000>; }; opp-800000000 { - opp-microvolt = <900000>; + opp-microvolt = <900000 900000 1500000>; }; opp-700000000 { - opp-microvolt = <900000>; + opp-microvolt = <900000 900000 1500000>; }; opp-600000000 { opp-hz = /bits/ 64 <600000000>; - opp-microvolt = <900000>; + opp-microvolt = <900000 900000 1500000>; clock-latency-ns = <140000>; }; opp-500000000 { opp-hz = /bits/ 64 <500000000>; - opp-microvolt = <900000>; + opp-microvolt = <900000 900000 1500000>; clock-latency-ns = <140000>; }; opp-400000000 { opp-hz = /bits/ 64 <400000000>; - opp-microvolt = <900000>; + opp-microvolt = <900000 900000 1500000>; clock-latency-ns = <140000>; }; opp-300000000 { opp-hz = /bits/ 64 <300000000>; - opp-microvolt = <900000>; + opp-microvolt = <900000 900000 1500000>; clock-latency-ns = <140000>; }; opp-200000000 { opp-hz = /bits/ 64 <200000000>; - opp-microvolt = <900000>; + opp-microvolt = <900000 900000 1500000>; clock-latency-ns = <140000>; }; }; &cluster_a7_opp_table { + opp-1400000000 { + opp-hz = /bits/ 64 <1400000000>; + opp-microvolt = <1275000>; + clock-latency-ns = <140000>; + }; opp-1300000000 { opp-microvolt = <1250000>; }; @@ -131,3 +151,12 @@ &mfc { compatible = "samsung,mfc-v8"; }; + +&soc { + cam_pd: power-domain@10045100 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10045100 0x20>; + #power-domain-cells = <0>; + label = "CAM"; + }; +}; diff --git a/arch/arm/boot/dts/gemini-dlink-dir-685.dts b/arch/arm/boot/dts/gemini-dlink-dir-685.dts index bfaa2de63a10..e2030ba16512 100644 --- a/arch/arm/boot/dts/gemini-dlink-dir-685.dts +++ b/arch/arm/boot/dts/gemini-dlink-dir-685.dts @@ -72,7 +72,6 @@ reg = <0>; /* 50 ns min period = 20 MHz */ spi-max-frequency = <20000000>; - spi-cpol; /* Clock active low */ vcc-supply = <&vdisp>; iovcc-supply = <&vdisp>; vci-supply = <&vdisp>; diff --git a/arch/arm/boot/dts/gemini-nas4220b.dts b/arch/arm/boot/dts/gemini-nas4220b.dts index f4535d635f3b..521714f38eed 100644 --- a/arch/arm/boot/dts/gemini-nas4220b.dts +++ b/arch/arm/boot/dts/gemini-nas4220b.dts @@ -20,7 +20,7 @@ }; chosen { - bootargs = "console=ttyS0,19200n8"; + bootargs = "console=ttyS0,19200n8 root=/dev/mtdblock3 rw rootfstype=squashfs,jffs2 rootwait"; stdout-path = &uart0; }; @@ -81,37 +81,10 @@ /* 16MB of flash */ reg = <0x30000000 0x01000000>; - partition@0 { - label = "RedBoot"; - reg = <0x00000000 0x00020000>; - read-only; - }; - partition@20000 { - label = "Kernel"; - reg = <0x00020000 0x00300000>; - }; - partition@320000 { - label = "Ramdisk"; - reg = <0x00320000 0x00600000>; - }; - partition@920000 { - label = "Application"; - reg = <0x00920000 0x00600000>; - }; - partition@f20000 { - label = "VCTL"; - reg = <0x00f20000 0x00020000>; - read-only; - }; - partition@f40000 { - label = "CurConf"; - reg = <0x00f40000 0x000a0000>; - read-only; - }; - partition@fe0000 { - label = "FIS directory"; - reg = <0x00fe0000 0x00020000>; - read-only; + partitions { + compatible = "redboot-fis"; + /* Eraseblock at 0xfe0000 */ + fis-index-block = <0x1fc>; }; }; diff --git a/arch/arm/boot/dts/gemini-sl93512r.dts b/arch/arm/boot/dts/gemini-sl93512r.dts index 2bb953440793..a98af0351906 100644 --- a/arch/arm/boot/dts/gemini-sl93512r.dts +++ b/arch/arm/boot/dts/gemini-sl93512r.dts @@ -24,7 +24,7 @@ }; chosen { - bootargs = "console=ttyS0,19200n8 root=/dev/sda1 rw rootwait"; + bootargs = "console=ttyS0,19200n8 root=/dev/mtdblock3 rw rootfstype=squashfs,jffs2 rootwait"; stdout-path = &uart0; }; @@ -36,8 +36,8 @@ wakeup-source; linux,code = <KEY_WPS_BUTTON>; label = "WPS"; - /* Conflict with NAND flash */ - gpios = <&gpio0 17 GPIO_ACTIVE_LOW>; + /* Conflicts with TVC and extended flash */ + gpios = <&gpio0 0 GPIO_ACTIVE_LOW>; }; button-setup { @@ -143,54 +143,30 @@ /* 16MB of flash */ reg = <0x30000000 0x01000000>; - partition@0 { - label = "BOOT"; - reg = <0x00000000 0x00020000>; - read-only; - }; - partition@120000 { - label = "Kern"; - reg = <0x00020000 0x00300000>; - }; - partition@320000 { - label = "Ramdisk"; - reg = <0x00320000 0x00600000>; - }; - partition@920000 { - label = "Application"; - reg = <0x00920000 0x00600000>; - }; - partition@f20000 { - label = "VCTL"; - reg = <0x00f20000 0x00020000>; - read-only; - }; - partition@f40000 { - label = "CurConf"; - reg = <0x00f40000 0x000a0000>; - read-only; - }; - partition@fe0000 { - label = "FIS directory"; - reg = <0x00fe0000 0x00020000>; - read-only; + partitions { + compatible = "redboot-fis"; + /* Eraseblock at 0xfe0000 */ + fis-index-block = <0x1fc>; }; }; syscon: syscon@40000000 { pinctrl { /* - * gpio0egrp cover line 16 used by HD LED - * gpio0fgrp cover line 17, 18 used by wireless LED and reset button - * gpio0hgrp cover line 21, 22 used by MDIO for Marvell PHY - * gpio0kgrp cover line 31 used by USB LED + * gpio0agrp cover line 0, used by WPS button + * gpio0fgrp cover line 16 used by HD LED + * gpio0ggrp cover line 17, 18 used by wireless LAN LED and + * reset button OR USB ID select on 17 and USB VBUS select + * on 18. (Confusing.) + * gpio0igrp cover line 21, 22 used by MDIO for Marvell PHY */ gpio0_default_pins: pinctrl-gpio0 { mux { function = "gpio0"; - groups = "gpio0egrp", + groups = "gpio0agrp", "gpio0fgrp", - "gpio0hgrp"; + "gpio0ggrp", + "gpio0igrp"; }; }; /* diff --git a/arch/arm/boot/dts/ibm-power9-dual.dtsi b/arch/arm/boot/dts/ibm-power9-dual.dtsi index 2abc42eda7b0..a0fa65b44b0f 100644 --- a/arch/arm/boot/dts/ibm-power9-dual.dtsi +++ b/arch/arm/boot/dts/ibm-power9-dual.dtsi @@ -86,7 +86,7 @@ #address-cells = <1>; #size-cells = <0>; - fsi_occ0: occ { + fsi_occ0: occ@1 { compatible = "ibm,p9-occ"; }; }; @@ -187,7 +187,7 @@ #address-cells = <1>; #size-cells = <0>; - fsi_occ1: occ { + fsi_occ1: occ@2 { compatible = "ibm,p9-occ"; }; }; diff --git a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts index dbecd6d2cfc4..7d4301b22b90 100644 --- a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts +++ b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts @@ -14,8 +14,8 @@ bits-per-pixel = <16>; fsl,pcr = <0xcad08b80>; bus-width = <18>; - native-mode = <&qvga_timings>; display-timings { + native-mode = <&qvga_timings>; qvga_timings: 320x240 { clock-frequency = <6500000>; hactive = <320>; diff --git a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts index ad2f7e879831..80a7f96de4c6 100644 --- a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts +++ b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts @@ -14,8 +14,8 @@ bits-per-pixel = <16>; fsl,pcr = <0xfa208b80>; bus-width = <18>; - native-mode = <&dvi_svga_timings>; display-timings { + native-mode = <&dvi_svga_timings>; dvi_svga_timings: 800x600 { clock-frequency = <40000000>; hactive = <800>; diff --git a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts index d60d8f464ca9..24027a1fb46d 100644 --- a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts +++ b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts @@ -14,8 +14,8 @@ bits-per-pixel = <16>; fsl,pcr = <0xfa208b80>; bus-width = <18>; - native-mode = <&dvi_vga_timings>; display-timings { + native-mode = <&dvi_vga_timings>; dvi_vga_timings: 640x480 { clock-frequency = <31250000>; hactive = <640>; diff --git a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts index 0fde90df2b54..3f38c2e60a74 100644 --- a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts +++ b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts @@ -165,8 +165,6 @@ }; &usbhost1 { - phy_type = "serial"; - dr_mode = "host"; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx25-pdk.dts b/arch/arm/boot/dts/imx25-pdk.dts index f8544a9e4633..fb66884d8a2f 100644 --- a/arch/arm/boot/dts/imx25-pdk.dts +++ b/arch/arm/boot/dts/imx25-pdk.dts @@ -76,8 +76,8 @@ bits-per-pixel = <16>; fsl,pcr = <0xfa208b80>; bus-width = <18>; - native-mode = <&wvga_timings>; display-timings { + native-mode = <&wvga_timings>; wvga_timings: 640x480 { hactive = <640>; vactive = <480>; @@ -304,8 +304,6 @@ }; &usbhost1 { - phy_type = "serial"; - dr_mode = "host"; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi index 9a097ef014af..40b95a290bd6 100644 --- a/arch/arm/boot/dts/imx25.dtsi +++ b/arch/arm/boot/dts/imx25.dtsi @@ -570,6 +570,9 @@ clock-names = "ipg", "ahb", "per"; fsl,usbmisc = <&usbmisc 1>; fsl,usbphy = <&usbphy1>; + maximum-speed = "full-speed"; + phy_type = "serial"; + dr_mode = "host"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx27-apf27dev.dts b/arch/arm/boot/dts/imx27-apf27dev.dts index 087c6e237af0..6f1e8ce9e76e 100644 --- a/arch/arm/boot/dts/imx27-apf27dev.dts +++ b/arch/arm/boot/dts/imx27-apf27dev.dts @@ -12,10 +12,10 @@ display: display { model = "Chimei-LW700AT9003"; - native-mode = <&timing0>; bits-per-pixel = <16>; /* non-standard but required */ fsl,pcr = <0xfae80083>; /* non-standard but required */ display-timings { + native-mode = <&timing0>; timing0: 800x480 { clock-frequency = <33000033>; hactive = <800>; diff --git a/arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dts b/arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dts index 84fc8df4be7c..9c3ec82ec7e5 100644 --- a/arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dts +++ b/arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dts @@ -11,11 +11,11 @@ display0: CMO-QVGA { model = "CMO-QVGA"; - native-mode = <&timing0>; bits-per-pixel = <16>; fsl,pcr = <0xfad08b80>; display-timings { + native-mode = <&timing0>; timing0: 320x240 { clock-frequency = <6500000>; hactive = <320>; diff --git a/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts b/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts index 5e5e282ed30e..0cd75dadf292 100644 --- a/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts +++ b/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts @@ -15,10 +15,10 @@ display: display { model = "Primeview-PD050VL1"; - native-mode = <&timing0>; bits-per-pixel = <16>; /* non-standard but required */ fsl,pcr = <0xf0c88080>; /* non-standard but required */ display-timings { + native-mode = <&timing0>; timing0: 640x480 { hactive = <640>; vactive = <480>; diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts index 5606f417e9e8..bf883e45576a 100644 --- a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts +++ b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts @@ -14,11 +14,11 @@ display0: LQ035Q7 { model = "Sharp-LQ035Q7"; - native-mode = <&timing0>; bits-per-pixel = <16>; fsl,pcr = <0xf00080c0>; display-timings { + native-mode = <&timing0>; timing0: 240x320 { clock-frequency = <5500000>; hactive = <240>; diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi index 3652f5556b29..f3464cf52e49 100644 --- a/arch/arm/boot/dts/imx27.dtsi +++ b/arch/arm/boot/dts/imx27.dtsi @@ -585,7 +585,7 @@ status = "disabled"; }; - iram: iram@ffff4c00 { + iram: sram@ffff4c00 { compatible = "mmio-sram"; reg = <0xffff4c00 0xb400>; }; diff --git a/arch/arm/boot/dts/imx31.dtsi b/arch/arm/boot/dts/imx31.dtsi index d7f6fb764997..6b62f0745b82 100644 --- a/arch/arm/boot/dts/imx31.dtsi +++ b/arch/arm/boot/dts/imx31.dtsi @@ -55,7 +55,7 @@ interrupt-parent = <&avic>; ranges; - iram: iram@1fffc000 { + iram: sram@1fffc000 { compatible = "mmio-sram"; reg = <0x1fffc000 0x4000>; #address-cells = <1>; diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts index ed6a3ce874b2..552196d8a60a 100644 --- a/arch/arm/boot/dts/imx51-babbage.dts +++ b/arch/arm/boot/dts/imx51-babbage.dts @@ -58,29 +58,27 @@ display1: disp1 { compatible = "fsl,imx-parallel-display"; + #address-cells = <1>; + #size-cells = <0>; interface-pix-fmt = "rgb24"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ipu_disp1>; - display-timings { - native-mode = <&timing0>; - timing0: dvi { - clock-frequency = <65000000>; - hactive = <1024>; - vactive = <768>; - hback-porch = <220>; - hfront-porch = <40>; - vback-porch = <21>; - vfront-porch = <7>; - hsync-len = <60>; - vsync-len = <10>; - }; - }; - port { + port@0 { + reg = <0>; + display0_in: endpoint { remote-endpoint = <&ipu_di0_disp1>; }; }; + + port@1 { + reg = <1>; + + parallel_display_out: endpoint { + remote-endpoint = <&tfp410_in>; + }; + }; }; display2: disp2 { @@ -115,6 +113,42 @@ }; }; + dvi-connector { + compatible = "dvi-connector"; + digital; + + port { + dvi_connector_in: endpoint { + remote-endpoint = <&tfp410_out>; + }; + }; + }; + + dvi-encoder { + compatible = "ti,tfp410"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + tfp410_in: endpoint { + remote-endpoint = <¶llel_display_out>; + }; + }; + + port@1 { + reg = <1>; + + tfp410_out: endpoint { + remote-endpoint = <&dvi_connector_in>; + }; + }; + }; + }; + gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index 0a4b9a5d9a9c..dea86b98e9c3 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -116,7 +116,7 @@ interrupt-parent = <&tzic>; ranges; - iram: iram@1ffe0000 { + iram: sram@1ffe0000 { compatible = "mmio-sram"; reg = <0x1ffe0000 0x20000>; }; diff --git a/arch/arm/boot/dts/imx53-m53menlo.dts b/arch/arm/boot/dts/imx53-m53menlo.dts index 10acc5331ba6..719ed5ca454a 100644 --- a/arch/arm/boot/dts/imx53-m53menlo.dts +++ b/arch/arm/boot/dts/imx53-m53menlo.dts @@ -54,7 +54,8 @@ }; panel { - compatible = "edt,etm070080dh6"; + compatible = "edt,etm0700g0dh6"; + pinctrl-0 = <&pinctrl_display_gpio>; enable-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>; port { diff --git a/arch/arm/boot/dts/imx53-qsb-common.dtsi b/arch/arm/boot/dts/imx53-qsb-common.dtsi index f00dda334976..9b4efcd82636 100644 --- a/arch/arm/boot/dts/imx53-qsb-common.dtsi +++ b/arch/arm/boot/dts/imx53-qsb-common.dtsi @@ -18,34 +18,28 @@ display0: disp0 { compatible = "fsl,imx-parallel-display"; - interface-pix-fmt = "rgb565"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ipu_disp0>; + + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; - display-timings { - claawvga { - native-mode; - clock-frequency = <27000000>; - hactive = <800>; - vactive = <480>; - hback-porch = <40>; - hfront-porch = <60>; - vback-porch = <10>; - vfront-porch = <10>; - hsync-len = <20>; - vsync-len = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - }; - port { + port@0 { + reg = <0>; + display0_in: endpoint { remote-endpoint = <&ipu_di0_disp0>; }; }; + + port@1 { + reg = <1>; + + display_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; }; gpio-keys { @@ -84,6 +78,16 @@ }; }; + panel { + compatible = "sii,43wvf1g"; + + port { + panel_in: endpoint { + remote-endpoint = <&display_out>; + }; + }; + }; + regulators { compatible = "simple-bus"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/imx53-usbarmory.dts b/arch/arm/boot/dts/imx53-usbarmory.dts index ee6263d1c2d3..f34993a490ee 100644 --- a/arch/arm/boot/dts/imx53-usbarmory.dts +++ b/arch/arm/boot/dts/imx53-usbarmory.dts @@ -120,7 +120,7 @@ }; /* - * UART mode pin header configration + * UART mode pin header configuration * 3 - GPIO5[26], pull-down 100K * 4 - GPIO5[27], pull-down 100K * 5 - TX, pull-up 100K diff --git a/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi b/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi index 2a6ce87071f9..9e027b9a5f91 100644 --- a/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi +++ b/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi @@ -328,6 +328,10 @@ pinctrl-0 = <&pinctrl_pwm3>; }; +&snvs_pwrkey { + status = "okay"; +}; + &ssi2 { status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6-logicpd-som.dtsi b/arch/arm/boot/dts/imx6-logicpd-som.dtsi index 7ceae3573248..547fb141ec0c 100644 --- a/arch/arm/boot/dts/imx6-logicpd-som.dtsi +++ b/arch/arm/boot/dts/imx6-logicpd-som.dtsi @@ -207,6 +207,10 @@ vin-supply = <&sw1c_reg>; }; +&snvs_poweroff { + status = "okay"; +}; + &iomuxc { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hog>; diff --git a/arch/arm/boot/dts/imx6dl-apf6dev.dts b/arch/arm/boot/dts/imx6dl-apf6dev.dts index 6632e99fbb68..3dcce3454b08 100644 --- a/arch/arm/boot/dts/imx6dl-apf6dev.dts +++ b/arch/arm/boot/dts/imx6dl-apf6dev.dts @@ -1,49 +1,6 @@ -/* - * Copyright 2015 Armadeus Systems - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +// +// Copyright 2015 Armadeus Systems <support@armadeus.com> /dts-v1/; #include "imx6dl.dtsi" diff --git a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts index 9a5d6c94cca4..cd075621de52 100644 --- a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts +++ b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts @@ -168,6 +168,21 @@ &i2c3 { status = "okay"; + /* + * Touchscreen is using SODIMM 28/30, also used for PWM<B>, PWM<C>, + * aka pwm2, pwm3. so if you enable touchscreen, disable the pwms + */ + touchscreen@4a { + compatible = "atmel,maxtouch"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcap_1>; + reg = <0x4a>; + interrupt-parent = <&gpio1>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; /* SODIMM 28 */ + reset-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>; /* SODIMM 30 */ + status = "disabled"; + }; + /* M41T0M6 real time clock on carrier board */ rtc_i2c: rtc@68 { compatible = "st,m41t0"; @@ -175,6 +190,30 @@ }; }; +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = < + &pinctrl_weim_gpio_1 &pinctrl_weim_gpio_2 + &pinctrl_weim_gpio_3 &pinctrl_weim_gpio_4 + &pinctrl_weim_gpio_5 &pinctrl_weim_gpio_6 + &pinctrl_usbh_oc_1 &pinctrl_usbc_id_1 + >; + + pinctrl_pcap_1: pcap1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0 /* SODIMM 28 */ + MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x1b0b0 /* SODIMM 30 */ + >; + }; + + pinctrl_mxt_ts: mxttsgrp { + fsl,pins = < + MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x130b0 /* SODIMM 107 */ + MX6QDL_PAD_SD2_DAT1__GPIO1_IO14 0x130b0 /* SODIMM 106 */ + >; + }; +}; + &ipu1_di0_disp0 { remote-endpoint = <&lcd_display_in>; }; diff --git a/arch/arm/boot/dts/imx6dl-gw5907.dts b/arch/arm/boot/dts/imx6dl-gw5907.dts new file mode 100644 index 000000000000..3fa2822beffc --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-gw5907.dts @@ -0,0 +1,14 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2019 Gateworks Corporation + */ + +/dts-v1/; + +#include "imx6dl.dtsi" +#include "imx6qdl-gw5907.dtsi" + +/ { + model = "Gateworks Ventana i.MX6 DualLite/Solo GW5907"; + compatible = "gw,imx6dl-gw5907", "gw,ventana", "fsl,imx6dl"; +}; diff --git a/arch/arm/boot/dts/imx6dl-gw5910.dts b/arch/arm/boot/dts/imx6dl-gw5910.dts new file mode 100644 index 000000000000..0d5e7e5da536 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-gw5910.dts @@ -0,0 +1,14 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2019 Gateworks Corporation + */ + +/dts-v1/; + +#include "imx6dl.dtsi" +#include "imx6qdl-gw5910.dtsi" + +/ { + model = "Gateworks Ventana i.MX6 DualLite/Solo GW5910"; + compatible = "gw,imx6dl-gw5910", "gw,ventana", "fsl,imx6dl"; +}; diff --git a/arch/arm/boot/dts/imx6dl-gw5912.dts b/arch/arm/boot/dts/imx6dl-gw5912.dts new file mode 100644 index 000000000000..5260e0142d63 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-gw5912.dts @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2019 Gateworks Corporation + */ + +/dts-v1/; +#include "imx6dl.dtsi" +#include "imx6qdl-gw5912.dtsi" + +/ { + model = "Gateworks Ventana i.MX6 DualLite/Solo GW5912"; + compatible = "gw,imx6dl-gw5912", "gw,ventana", "fsl,imx6dl"; +}; diff --git a/arch/arm/boot/dts/imx6dl-gw5913.dts b/arch/arm/boot/dts/imx6dl-gw5913.dts new file mode 100644 index 000000000000..b74e533c8e67 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-gw5913.dts @@ -0,0 +1,14 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2019 Gateworks Corporation + */ + +/dts-v1/; + +#include "imx6dl.dtsi" +#include "imx6qdl-gw5913.dtsi" + +/ { + model = "Gateworks Ventana i.MX6 DualLite/Solo GW5913"; + compatible = "gw,imx6dl-gw5913", "gw,ventana", "fsl,imx6dl"; +}; diff --git a/arch/arm/boot/dts/imx6dl-icore-mipi.dts b/arch/arm/boot/dts/imx6dl-icore-mipi.dts index e43bccb78ab2..d8f3821a0ffd 100644 --- a/arch/arm/boot/dts/imx6dl-icore-mipi.dts +++ b/arch/arm/boot/dts/imx6dl-icore-mipi.dts @@ -8,7 +8,7 @@ /dts-v1/; #include "imx6dl.dtsi" -#include "imx6qdl-icore.dtsi" +#include "imx6qdl-icore-1.5.dtsi" / { model = "Engicam i.CoreM6 DualLite/Solo MIPI Starter Kit"; diff --git a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi index e8d800fec637..80ed5f16a76e 100644 --- a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi +++ b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi @@ -4,6 +4,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/input/input.h> #include <dt-bindings/pwm/pwm.h> / { @@ -308,7 +309,7 @@ clock-frequency = <100000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3>; - status = "disabled"; + status = "okay"; oled: oled@3d { compatible = "solomon,ssd1305fb-i2c"; @@ -330,6 +331,18 @@ vcc-supply = <&sw2_reg>; status = "disabled"; }; + + touchkeys: keys@5a { + compatible = "fsl,mpr121-touchkey"; + reg = <0x5a>; + vdd-supply = <&sw2_reg>; + autorepeat; + linux,keycodes = <KEY_1>, <KEY_2>, <KEY_3>, <KEY_4>, <KEY_5>, + <KEY_6>, <KEY_7>, <KEY_8>, <KEY_9>, + <KEY_BACKSPACE>, <KEY_0>, <KEY_ENTER>; + poll-interval = <50>; + status = "disabled"; + }; }; &iomuxc { @@ -447,6 +460,13 @@ >; }; + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_GPIO_7__UART2_TX_DATA 0x1b098 + MX6QDL_PAD_GPIO_8__UART2_RX_DATA 0x1b098 + >; + }; + pinctrl_usbh1: usbh1grp { fsl,pins = < MX6QDL_PAD_EIM_D30__USB_H1_OC 0x1b098 @@ -532,6 +552,12 @@ status = "okay"; }; +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + &usbh1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbh1>; diff --git a/arch/arm/boot/dts/imx6dl-yapp4-hydra.dts b/arch/arm/boot/dts/imx6dl-yapp4-hydra.dts index f97927064750..6010d3d872ab 100644 --- a/arch/arm/boot/dts/imx6dl-yapp4-hydra.dts +++ b/arch/arm/boot/dts/imx6dl-yapp4-hydra.dts @@ -25,10 +25,6 @@ status = "okay"; }; -&i2c3 { - status = "okay"; -}; - &leds { status = "okay"; }; @@ -45,6 +41,10 @@ status = "okay"; }; +&touchkeys { + status = "okay"; +}; + &usdhc3 { status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi index 2ed10310a7b7..008312ee0c31 100644 --- a/arch/arm/boot/dts/imx6dl.dtsi +++ b/arch/arm/boot/dts/imx6dl.dtsi @@ -64,6 +64,7 @@ 396000 1175000 >; clock-latency = <61036>; /* two CLK32 periods */ + #cooling-cells = <2>; clocks = <&clks IMX6QDL_CLK_ARM>, <&clks IMX6QDL_CLK_PLL2_PFD2_396M>, <&clks IMX6QDL_CLK_STEP>, diff --git a/arch/arm/boot/dts/imx6q-apalis-eval.dts b/arch/arm/boot/dts/imx6q-apalis-eval.dts index 0edd3043d9c1..4665e15b196d 100644 --- a/arch/arm/boot/dts/imx6q-apalis-eval.dts +++ b/arch/arm/boot/dts/imx6q-apalis-eval.dts @@ -167,6 +167,19 @@ &i2c1 { status = "okay"; + /* + * Touchscreen is using SODIMM 28/30, also used for PWM<B>, PWM<C>, + * aka pwm2, pwm3. so if you enable touchscreen, disable the pwms + */ + touchscreen@4a { + compatible = "atmel,maxtouch"; + reg = <0x4a>; + interrupt-parent = <&gpio6>; + interrupts = <10 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>; /* SODIMM 13 */ + status = "disabled"; + }; + pcie-switch@58 { compatible = "plx,pex8605"; reg = <0x58>; diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts b/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts index b94bb687be6b..a3fa04a97d81 100644 --- a/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts +++ b/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts @@ -172,6 +172,19 @@ &i2c1 { status = "okay"; + /* + * Touchscreen is using SODIMM 28/30, also used for PWM<B>, PWM<C>, + * aka pwm2, pwm3. so if you enable touchscreen, disable the pwms + */ + touchscreen@4a { + compatible = "atmel,maxtouch"; + reg = <0x4a>; + interrupt-parent = <&gpio6>; + interrupts = <10 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>; /* SODIMM 13 */ + status = "disabled"; + }; + /* M41T0M6 real time clock on carrier board */ rtc_i2c: rtc@68 { compatible = "st,m41t0"; diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora.dts b/arch/arm/boot/dts/imx6q-apalis-ixora.dts index 302fd6adc8a7..5ba49d0f4880 100644 --- a/arch/arm/boot/dts/imx6q-apalis-ixora.dts +++ b/arch/arm/boot/dts/imx6q-apalis-ixora.dts @@ -171,6 +171,19 @@ &i2c1 { status = "okay"; + /* + * Touchscreen is using SODIMM 28/30, also used for PWM<B>, PWM<C>, + * aka pwm2, pwm3. so if you enable touchscreen, disable the pwms + */ + touchscreen@4a { + compatible = "atmel,maxtouch"; + reg = <0x4a>; + interrupt-parent = <&gpio6>; + interrupts = <10 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>; /* SODIMM 13 */ + status = "disabled"; + }; + eeprom@50 { compatible = "atmel,24c02"; reg = <0x50>; diff --git a/arch/arm/boot/dts/imx6q-apf6dev.dts b/arch/arm/boot/dts/imx6q-apf6dev.dts index 07a36bb8075b..664b0af8f0bb 100644 --- a/arch/arm/boot/dts/imx6q-apf6dev.dts +++ b/arch/arm/boot/dts/imx6q-apf6dev.dts @@ -1,49 +1,6 @@ -/* - * Copyright 2015 Armadeus Systems - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +// +// Copyright 2015 Armadeus Systems <support@armadeus.com> /dts-v1/; #include "imx6q.dtsi" diff --git a/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts b/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts index 9c61e3be2d9a..bb74fc62d913 100644 --- a/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts +++ b/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts @@ -43,6 +43,14 @@ status = "okay"; }; +&can1 { + status = "okay"; +}; + +&can2 { + status = "disabled"; +}; + &hdmi { ddc-i2c-bus = <&i2c2>; status = "okay"; @@ -55,7 +63,7 @@ #sound-dai-cells = <0>; clocks = <&clk_ext_audio_codec>; VDDA-supply = <®_3p3v>; - VDDIO-supply = <®_3p3v>; + VDDIO-supply = <&sw2_reg>; }; }; diff --git a/arch/arm/boot/dts/imx6q-dhcom-som.dtsi b/arch/arm/boot/dts/imx6q-dhcom-som.dtsi index 387801dde02e..87f0aa897086 100644 --- a/arch/arm/boot/dts/imx6q-dhcom-som.dtsi +++ b/arch/arm/boot/dts/imx6q-dhcom-som.dtsi @@ -51,13 +51,11 @@ &can1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flexcan1>; - status = "okay"; }; &can2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flexcan2>; - status = "okay"; }; &ecspi1 { @@ -206,7 +204,7 @@ }; rtc@56 { - compatible = "rv3029c2"; + compatible = "microcrystal,rv3029"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rtc_hw300>; reg = <0x56>; diff --git a/arch/arm/boot/dts/imx6q-gw54xx.dts b/arch/arm/boot/dts/imx6q-gw54xx.dts index ecc3989f607b..d5d46908cf6e 100644 --- a/arch/arm/boot/dts/imx6q-gw54xx.dts +++ b/arch/arm/boot/dts/imx6q-gw54xx.dts @@ -15,19 +15,16 @@ sound-digital { compatible = "simple-audio-card"; simple-audio-card,name = "tda1997x-audio"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&sound_codec>; + simple-audio-card,frame-master = <&sound_codec>; - simple-audio-card,dai-link@0 { - format = "i2s"; - - cpu { - sound-dai = <&ssi2>; - }; + sound_cpu: simple-audio-card,cpu { + sound-dai = <&ssi2>; + }; - codec { - bitclock-master; - frame-master; - sound-dai = <&hdmi_receiver>; - }; + sound_codec: simple-audio-card,codec { + sound-dai = <&hdmi_receiver>; }; }; }; diff --git a/arch/arm/boot/dts/imx6q-gw5907.dts b/arch/arm/boot/dts/imx6q-gw5907.dts new file mode 100644 index 000000000000..b25526ef5886 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-gw5907.dts @@ -0,0 +1,14 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2019 Gateworks Corporation + */ + +/dts-v1/; + +#include "imx6q.dtsi" +#include "imx6qdl-gw5907.dtsi" + +/ { + model = "Gateworks Ventana i.MX6 Dual/Quad GW5907"; + compatible = "gw,imx6q-gw5907", "gw,ventana", "fsl,imx6q"; +}; diff --git a/arch/arm/boot/dts/imx6q-gw5910.dts b/arch/arm/boot/dts/imx6q-gw5910.dts new file mode 100644 index 000000000000..6aafa2fcee08 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-gw5910.dts @@ -0,0 +1,14 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2019 Gateworks Corporation + */ + +/dts-v1/; + +#include "imx6q.dtsi" +#include "imx6qdl-gw5910.dtsi" + +/ { + model = "Gateworks Ventana i.MX6 Dual/Quad GW5910"; + compatible = "gw,imx6q-gw5910", "gw,ventana", "fsl,imx6q"; +}; diff --git a/arch/arm/boot/dts/imx6q-gw5912.dts b/arch/arm/boot/dts/imx6q-gw5912.dts new file mode 100644 index 000000000000..4dcbd943cd93 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-gw5912.dts @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2019 Gateworks Corporation + */ + +/dts-v1/; +#include "imx6q.dtsi" +#include "imx6qdl-gw5912.dtsi" + +/ { + model = "Gateworks Ventana i.MX6 Dual/Quad GW5912"; + compatible = "gw,imx6q-gw5912", "gw,ventana", "fsl,imx6q"; +}; diff --git a/arch/arm/boot/dts/imx6q-gw5913.dts b/arch/arm/boot/dts/imx6q-gw5913.dts new file mode 100644 index 000000000000..6f511f1665fd --- /dev/null +++ b/arch/arm/boot/dts/imx6q-gw5913.dts @@ -0,0 +1,14 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2019 Gateworks Corporation + */ + +/dts-v1/; + +#include "imx6q.dtsi" +#include "imx6qdl-gw5913.dtsi" + +/ { + model = "Gateworks Ventana i.MX6 Dual/Quad GW5913"; + compatible = "gw,imx6q-gw5913", "gw,ventana", "fsl,imx6q"; +}; diff --git a/arch/arm/boot/dts/imx6q-logicpd.dts b/arch/arm/boot/dts/imx6q-logicpd.dts index d96ae54be338..7a3d1d3e54a9 100644 --- a/arch/arm/boot/dts/imx6q-logicpd.dts +++ b/arch/arm/boot/dts/imx6q-logicpd.dts @@ -73,6 +73,16 @@ status = "okay"; }; +&i2c1 { + touchscreen@26 { + compatible = "ilitek,ili2117"; + reg = <0x26>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_touchscreen>; + interrupts-extended = <&gpio1 6 IRQ_TYPE_EDGE_RISING>; + }; +}; + &ldb { status = "okay"; diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index d038f4117024..9d3be1cc6b64 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -73,6 +73,7 @@ 396000 1175000 >; clock-latency = <61036>; /* two CLK32 periods */ + #cooling-cells = <2>; clocks = <&clks IMX6QDL_CLK_ARM>, <&clks IMX6QDL_CLK_PLL2_PFD2_396M>, <&clks IMX6QDL_CLK_STEP>, @@ -107,6 +108,7 @@ 396000 1175000 >; clock-latency = <61036>; /* two CLK32 periods */ + #cooling-cells = <2>; clocks = <&clks IMX6QDL_CLK_ARM>, <&clks IMX6QDL_CLK_PLL2_PFD2_396M>, <&clks IMX6QDL_CLK_STEP>, @@ -141,6 +143,7 @@ 396000 1175000 >; clock-latency = <61036>; /* two CLK32 periods */ + #cooling-cells = <2>; clocks = <&clks IMX6QDL_CLK_ARM>, <&clks IMX6QDL_CLK_PLL2_PFD2_396M>, <&clks IMX6QDL_CLK_STEP>, diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi index 7c4ad541c3f5..1b5bc6b5e806 100644 --- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi +++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi @@ -148,14 +148,16 @@ }; &can1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_flexcan1>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pinctrl_flexcan1_default>; + pinctrl-1 = <&pinctrl_flexcan1_sleep>; status = "disabled"; }; &can2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_flexcan2>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pinctrl_flexcan2_default>; + pinctrl-1 = <&pinctrl_flexcan2_sleep>; status = "disabled"; }; @@ -198,15 +200,18 @@ &hdmi { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hdmi_ddc>; + pinctrl-0 = <&pinctrl_hdmi_ddc &pinctrl_hdmi_cec>; status = "disabled"; }; /* I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier board) */ &i2c1 { clock-frequency = <100000>; - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c1>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + scl-gpios = <&gpio5 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio5 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "disabled"; }; @@ -216,8 +221,11 @@ */ &i2c2 { clock-frequency = <100000>; - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c2>; + pinctrl-1 = <&pinctrl_i2c2_gpio>; + scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; pmic: pfuze100@8 { @@ -372,9 +380,9 @@ */ &i2c3 { clock-frequency = <100000>; - pinctrl-names = "default", "recovery"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c3>; - pinctrl-1 = <&pinctrl_i2c3_recovery>; + pinctrl-1 = <&pinctrl_i2c3_gpio>; scl-gpios = <&gpio3 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; sda-gpios = <&gpio3 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "disabled"; @@ -599,19 +607,32 @@ >; }; - pinctrl_flexcan1: flexcan1grp { + pinctrl_flexcan1_default: flexcan1defgrp { fsl,pins = < MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x1b0b0 MX6QDL_PAD_GPIO_8__FLEXCAN1_RX 0x1b0b0 >; }; - pinctrl_flexcan2: flexcan2grp { + pinctrl_flexcan1_sleep: flexcan1slpgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x0 + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0 + >; + }; + + pinctrl_flexcan2_default: flexcan2defgrp { fsl,pins = < MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b0b0 MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b0b0 >; }; + pinctrl_flexcan2_sleep: flexcan2slpgrp { + fsl,pins = < + MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x0 + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x0 + >; + }; pinctrl_gpio_bl_on: gpioblon { fsl,pins = < @@ -646,6 +667,13 @@ >; }; + pinctrl_i2c1_gpio: i2c1gpiogrp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26 0x4001b8b1 + MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27 0x4001b8b1 + >; + }; + pinctrl_i2c2: i2c2grp { fsl,pins = < MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 @@ -653,6 +681,13 @@ >; }; + pinctrl_i2c2_gpio: i2c2gpiogrp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x4001b8b1 + >; + }; + pinctrl_i2c3: i2c3grp { fsl,pins = < MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1 @@ -660,7 +695,7 @@ >; }; - pinctrl_i2c3_recovery: i2c3recoverygrp { + pinctrl_i2c3_gpio: i2c3gpiogrp { fsl,pins = < MX6QDL_PAD_EIM_D17__GPIO3_IO17 0x4001b8b1 MX6QDL_PAD_EIM_D18__GPIO3_IO18 0x4001b8b1 diff --git a/arch/arm/boot/dts/imx6qdl-apf6.dtsi b/arch/arm/boot/dts/imx6qdl-apf6.dtsi index 4738c3c1ab50..b78ed7974ea9 100644 --- a/arch/arm/boot/dts/imx6qdl-apf6.dtsi +++ b/arch/arm/boot/dts/imx6qdl-apf6.dtsi @@ -1,66 +1,56 @@ -/* - * Copyright 2015 Armadeus Systems - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +// +// Copyright 2015 Armadeus Systems <support@armadeus.com> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> +/ { + reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-name = "1P8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + vin-supply = <®_3p3v>; + }; + + usdhc1_pwrseq: usdhc1-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio2 8 GPIO_ACTIVE_LOW>; + post-power-on-delay-ms = <15>; + power-off-delay-us = <70>; + }; +}; + &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii-id"; phy-reset-duration = <10>; phy-reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; + phy-handle = <ðphy1>; status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + interrupt-parent = <&gpio1>; + interrupts = <28 IRQ_TYPE_LEVEL_LOW>; + status = "okay"; + }; + }; }; /* Bluetooth */ &uart2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; + uart-has-rtscts; status = "okay"; }; @@ -68,6 +58,12 @@ &usdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc1>; + bus-width = <4>; + mmc-pwrseq = <&usdhc1_pwrseq>; + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_1p8v>; + cap-power-off-card; + keep-power-in-suspend; non-removable; status = "okay"; @@ -94,65 +90,63 @@ }; &iomuxc { - apf6 { - pinctrl_enet: enetgrp { - fsl,pins = < - MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b8b0 - MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 - MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 - MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24 0x130b0 - MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x130b0 - MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 - MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 - MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 - MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 - MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 - MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 - MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x13030 - MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 - MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x13030 - MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1f030 - MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1f030 - MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x13030 - >; - }; + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b8b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24 0x130b0 + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x130b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x13030 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x13030 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1f030 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1f030 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x13030 + >; + }; - pinctrl_uart2: uart2grp { - fsl,pins = < - MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b0 - MX6QDL_PAD_SD4_DAT5__UART2_RTS_B 0x1b0b0 - MX6QDL_PAD_SD4_DAT6__UART2_CTS_B 0x1b0b0 - MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b0 - MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x130b0 /* BT_EN */ - >; - }; + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b0 + MX6QDL_PAD_SD4_DAT5__UART2_RTS_B 0x1b0b0 + MX6QDL_PAD_SD4_DAT6__UART2_CTS_B 0x1b0b0 + MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b0 + MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x130b0 /* BT_EN */ + >; + }; - pinctrl_usdhc1: usdhc1grp { - fsl,pins = < - MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059 - MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059 - MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059 - MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059 - MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059 - MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059 - MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x1b0b0 /* WL_EN */ - MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x1b0b0 /* WL_IRQ */ - >; - }; + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059 + MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x130b0 /* WL_EN */ + MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x130b0 /* WL_IRQ */ + >; + }; - pinctrl_usdhc3: usdhc3grp { - fsl,pins = < - MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 - MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 - MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 - MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 - MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 - MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 - MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059 - MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059 - MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059 - MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 - >; - }; + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059 + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059 + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059 + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 + >; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi b/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi index 9fc1fa449f64..b8e74ab3c993 100644 --- a/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi +++ b/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi @@ -1,49 +1,6 @@ -/* - * Copyright 2015 Armadeus Systems - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +// +// Copyright 2015 Armadeus Systems <support@armadeus.com> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> @@ -54,35 +11,37 @@ stdout-path = &uart4; }; + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm3 0 191000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <0>; + power-supply = <®_5v>; + }; + disp0 { compatible = "fsl,imx-parallel-display"; - interface-pix-fmt = "bgr666"; pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ipu1_disp1>; - - display-timings { - lw700 { - clock-frequency = <33000033>; - hactive = <800>; - vactive = <480>; - hback-porch = <96>; - hfront-porch = <96>; - vback-porch = <20>; - vfront-porch = <21>; - hsync-len = <64>; - vsync-len = <4>; - hsync-active = <1>; - vsync-active = <1>; - de-active = <1>; - pixelclk-active = <1>; - }; - }; + pinctrl-0 = <&pinctrl_ipu1_disp0>; + + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; - port { display_in: endpoint { remote-endpoint = <&ipu1_di0_disp0>; }; }; + + port@1 { + reg = <1>; + + display_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; }; gpio-keys { @@ -111,17 +70,30 @@ }; }; + panel { + compatible = "armadeus,st0700-adapt"; + power-supply = <®_3p3v>; + backlight = <&backlight>; + + port { + panel_in: endpoint { + remote-endpoint = <&display_out>; + }; + }; + }; + reg_3p3v: regulator-3p3v { compatible = "regulator-fixed"; regulator-name = "3P3V"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; + vin-supply = <®_5v>; }; - reg_usbh1_vbus: regulator-usb-h1-vbus { + reg_5v: regulator-5v { compatible = "regulator-fixed"; - regulator-name = "usb_h1_vbus"; + regulator-name = "5V"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; regulator-always-on; @@ -166,6 +138,7 @@ &can2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flexcan2>; + xceiver-supply = <®_5v>; status = "okay"; }; @@ -212,6 +185,11 @@ VDDA-supply = <®_3p3v>; VDDIO-supply = <®_3p3v>; }; + + rtc@6f { + compatible = "microchip,mcp7940x"; + reg = <0x6f>; + }; }; &i2c3 { @@ -261,7 +239,7 @@ }; &usbh1 { - vbus-supply = <®_usbh1_vbus>; + vbus-supply = <®_5v>; phy_type = "utmi"; status = "okay"; }; @@ -297,178 +275,176 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpios>; - apf6dev { - pinctrl_audmux: audmuxgrp { - fsl,pins = < - MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x1b0b0 - MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x1b0b0 - MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x1b0b0 - MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x1b0b0 - MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 - >; - }; + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x1b0b0 + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x1b0b0 + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x1b0b0 + MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x1b0b0 + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 + >; + }; - pinctrl_ecspi1: ecspi1grp { - fsl,pins = < - MX6QDL_PAD_KEY_COL1__ECSPI1_MISO 0x100b1 - MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI 0x100b1 - MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK 0x100b1 - MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x1b0b0 - MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0 - MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 - >; - }; + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL1__ECSPI1_MISO 0x100b1 + MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI 0x100b1 + MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK 0x100b1 + MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x1b0b0 + MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0 + MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 + >; + }; - pinctrl_flexcan2: flexcan2grp { - fsl,pins = < - MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b0b0 - MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b0b0 - >; - }; + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b0b0 + MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b0b0 + >; + }; - pinctrl_gpio_keys: gpiokeysgrp { - fsl,pins = < - MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0 - >; - }; + pinctrl_gpio_keys: gpiokeysgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0 + >; + }; - pinctrl_gpio_leds: gpioledsgrp { - fsl,pins = < - MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x130b0 - >; - }; + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x130b0 + >; + }; - pinctrl_gpios: gpiosgrp { - fsl,pins = < - MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x100b1 - MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x100b1 - MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13 0x100b1 - MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14 0x100b1 - MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15 0x100b1 - MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16 0x100b1 - MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x100b1 - MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x100b1 - MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x100b1 - >; - }; + pinctrl_gpios: gpiosgrp { + fsl,pins = < + MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x100b1 + MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x100b1 + MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13 0x100b1 + MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14 0x100b1 + MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15 0x100b1 + MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16 0x100b1 + MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x100b1 + MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x100b1 + MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x100b1 + >; + }; - pinctrl_gsm: gsmgrp { - fsl,pins = < - MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x130b0 /* GSM_POKIN */ - MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x130b0 /* GSM_PWR_EN */ - >; - }; + pinctrl_gsm: gsmgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x130b0 /* GSM_POKIN */ + MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x130b0 /* GSM_PWR_EN */ + >; + }; - pinctrl_i2c1: i2c1grp { - fsl,pins = < - MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 - MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1 - >; - }; + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 + MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1 + >; + }; - pinctrl_i2c2: i2c2grp { - fsl,pins = < - MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 - MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 - >; - }; + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; - pinctrl_i2c3: i2c3grp { - fsl,pins = < - MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 - MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 - >; - }; + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 + >; + }; - pinctrl_ipu1_disp1: ipu1disp1grp { - fsl,pins = < - MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x100b1 - MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x100b1 - MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x100b1 - MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x100b1 - MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x100b1 - MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x100b1 - MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x100b1 - MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x100b1 - MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x100b1 - MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x100b1 - MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x100b1 - MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x100b1 - MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x100b1 - MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x100b1 - MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x100b1 - MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x100b1 - MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x100b1 - MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x100b1 - MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x100b1 - MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x100b1 - MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x100b1 - MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x100b1 - >; - }; + pinctrl_ipu1_disp0: ipu1disp0grp { + fsl,pins = < + MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x100b1 + MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x100b1 + MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x100b1 + MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x100b1 + MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x100b1 + MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x100b1 + MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x100b1 + MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x100b1 + MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x100b1 + MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x100b1 + MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x100b1 + MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x100b1 + MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x100b1 + MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x100b1 + MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x100b1 + MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x100b1 + MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x100b1 + MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x100b1 + MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x100b1 + MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x100b1 + MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x100b1 + MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x100b1 + >; + }; - pinctrl_pcie: pciegrp { - fsl,pins = < - MX6QDL_PAD_CSI0_DAT16__GPIO6_IO02 0x130b0 - >; - }; + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT16__GPIO6_IO02 0x130b0 + >; + }; - pinctrl_pwm3: pwm3grp { - fsl,pins = < - MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1 - >; - }; + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1 + >; + }; - pinctrl_uart1: uart1grp { - fsl,pins = < - MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b0 - MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b0 - >; - }; + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b0 + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b0 + >; + }; - pinctrl_uart3: uart3grp { - fsl,pins = < - MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b0 - MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b0 - MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b0 - MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b0 - >; - }; + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b0 + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b0 + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b0 + MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b0 + >; + }; - pinctrl_uart4: uart4grp { - fsl,pins = < - MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b0 - MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b0 - >; - }; + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b0 + MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b0 + >; + }; - pinctrl_usbotg: usbotggrp { - fsl,pins = < - MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x1b0b0 - >; - }; + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x1b0b0 + >; + }; - pinctrl_usdhc2: usdhc2grp { - fsl,pins = < - MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 - MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 - MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 - MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 - MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 - MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 - >; - }; + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + >; + }; - pinctrl_spdif: spdifgrp { - fsl,pins = < - MX6QDL_PAD_GPIO_19__SPDIF_OUT 0x1b0b0 - >; - }; + pinctrl_spdif: spdifgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_19__SPDIF_OUT 0x1b0b0 + >; + }; - pinctrl_touchscreen: touchscreengrp { - fsl,pins = < - MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03 0x1b0b0 - >; - }; + pinctrl_touchscreen: touchscreengrp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03 0x1b0b0 + >; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/imx6qdl-colibri.dtsi index 1beac22266ed..d03dff23863d 100644 --- a/arch/arm/boot/dts/imx6qdl-colibri.dtsi +++ b/arch/arm/boot/dts/imx6qdl-colibri.dtsi @@ -140,7 +140,18 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rmii"; + phy-handle = <ðphy>; status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy: ethernet-phy@0 { + reg = <0>; + micrel,led-mode = <0>; + }; + }; }; &hdmi { @@ -155,8 +166,11 @@ */ &i2c2 { clock-frequency = <100000>; - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c2>; + pinctrl-0 = <&pinctrl_i2c2_gpio>; + scl-gpios = <&gpio2 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio3 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; pmic: pfuze100@8 { @@ -301,9 +315,9 @@ */ &i2c3 { clock-frequency = <100000>; - pinctrl-names = "default", "recovery"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c3>; - pinctrl-1 = <&pinctrl_i2c3_recovery>; + pinctrl-1 = <&pinctrl_i2c3_gpio>; scl-gpios = <&gpio1 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "disabled"; @@ -415,6 +429,9 @@ }; &iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh_oc_1>; + pinctrl_audmux: audmuxgrp { fsl,pins = < MX6QDL_PAD_KEY_COL0__AUD5_TXC 0x130b0 @@ -498,6 +515,13 @@ >; }; + pinctrl_i2c2_gpio: i2c2grp { + fsl,pins = < + MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x4001b8b1 + MX6QDL_PAD_EIM_D16__GPIO3_IO16 0x4001b8b1 + >; + }; + pinctrl_i2c3: i2c3grp { fsl,pins = < MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 @@ -505,7 +529,7 @@ >; }; - pinctrl_i2c3_recovery: i2c3recoverygrp { + pinctrl_i2c3_gpio: i2c3gpiogrp { fsl,pins = < MX6QDL_PAD_GPIO_3__GPIO1_IO03 0x4001b8b1 MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x4001b8b1 @@ -604,6 +628,13 @@ >; }; + pinctrl_usbh_oc_1: usbhoc1grp { + fsl,pins = < + /* USBH_OC */ + MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x1b0b0 + >; + }; + pinctrl_spdif: spdifgrp { fsl,pins = < MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x1b0b0 @@ -670,6 +701,13 @@ >; }; + pinctrl_usbc_id_1: usbc_id-1 { + fsl,pins = < + /* USBC_ID */ + MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0 + >; + }; + pinctrl_usdhc1: usdhc1grp { fsl,pins = < MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17071 diff --git a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi index c23ba229fd05..c38e86eedcc0 100644 --- a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi @@ -105,19 +105,16 @@ sound-digital { compatible = "simple-audio-card"; simple-audio-card,name = "tda1997x-audio"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&sound_codec>; + simple-audio-card,frame-master = <&sound_codec>; - simple-audio-card,dai-link@0 { - format = "i2s"; - - cpu { - sound-dai = <&ssi2>; - }; + sound_cpu: simple-audio-card,cpu { + sound-dai = <&ssi2>; + }; - codec { - bitclock-master; - frame-master; - sound-dai = <&hdmi_receiver>; - }; + sound_codec: simple-audio-card,codec { + sound-dai = <&hdmi_receiver>; }; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw5907.dtsi b/arch/arm/boot/dts/imx6qdl-gw5907.dtsi new file mode 100644 index 000000000000..0bdebddffd51 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-gw5907.dtsi @@ -0,0 +1,399 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2019 Gateworks Corporation + */ + +#include <dt-bindings/gpio/gpio.h> + +/ { + /* these are used by bootloader for disabling nodes */ + aliases { + led0 = &led0; + led1 = &led1; + nand = &gpmi; + usb0 = &usbh1; + usb1 = &usbotg; + }; + + chosen { + stdout-path = &uart2; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + + led0: user1 { + label = "user1"; + gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */ + default-state = "on"; + linux,default-trigger = "heartbeat"; + }; + + led1: user2 { + label = "user2"; + gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */ + default-state = "off"; + }; + }; + + memory@10000000 { + device_type = "memory"; + reg = <0x10000000 0x20000000>; + }; + + pps { + compatible = "pps-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pps>; + gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; + status = "okay"; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_5p0v: regulator-5p0v { + compatible = "regulator-fixed"; + regulator-name = "5P0V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + reg_usb_otg_vbus: regulator-usb-otg-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii-id"; + phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&gpmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpmi_nand>; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c3>; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + gpio@23 { + compatible = "nxp,pca9555"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + }; + + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + pagesize = <16>; + }; + + eeprom@51 { + compatible = "atmel,24c02"; + reg = <0x51>; + pagesize = <16>; + }; + + eeprom@52 { + compatible = "atmel,24c02"; + reg = <0x52>; + pagesize = <16>; + }; + + eeprom@53 { + compatible = "atmel,24c02"; + reg = <0x53>; + pagesize = <16>; + }; + + rtc@68 { + compatible = "dallas,ds1672"; + reg = <0x68>; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + gpio@20 { + compatible = "nxp,pca9555"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; + + adc@48 { + compatible = "ti,ads1015"; + reg = <0x48>; + #address-cells = <1>; + #size-cells = <0>; + + channel@4 { + reg = <4>; + ti,gain = <0>; + ti,datarate = <5>; + }; + + channel@5 { + reg = <5>; + ti,gain = <0>; + ti,datarate = <5>; + }; + + channel@6 { + reg = <6>; + ti,gain = <0>; + ti,datarate = <5>; + }; + }; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio1 0 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */ + status = "disabled"; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */ + status = "disabled"; +}; + +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; /* MX6_DIO3 */ + status = "disabled"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + status = "okay"; +}; + +&usbh1 { + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; +}; + +&iomuxc { + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 + MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x1b0b0 + >; + }; + + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 + MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 + >; + }; + + pinctrl_gpmi_nand: gpminandgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 + MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 + MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 + MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 + MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 + MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 + MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 + MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 + MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 + MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 + MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 + MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 + MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 + MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 + MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x0001b0b0 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 + MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0 + >; + }; + + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 + >; + }; + + pinctrl_pps: ppsgrp { + fsl,pins = < + MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1 + >; + }; + + pinctrl_pwm2: pwm2grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm4: pwm4grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi new file mode 100644 index 000000000000..be1af7482f89 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi @@ -0,0 +1,491 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2019 Gateworks Corporation + */ + +#include <dt-bindings/gpio/gpio.h> + +/ { + /* these are used by bootloader for disabling nodes */ + aliases { + led0 = &led0; + led1 = &led1; + led2 = &led2; + }; + + chosen { + stdout-path = &uart2; + }; + + memory@10000000 { + device_type = "memory"; + reg = <0x10000000 0x20000000>; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + + led0: user1 { + label = "user1"; + gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */ + default-state = "on"; + linux,default-trigger = "heartbeat"; + }; + + led1: user2 { + label = "user2"; + gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */ + default-state = "off"; + }; + + led2: user3 { + label = "user3"; + gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */ + default-state = "off"; + }; + }; + + pps { + compatible = "pps-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pps>; + gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>; + status = "okay"; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_5p0v: regulator-5p0v { + compatible = "regulator-fixed"; + regulator-name = "5P0V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + reg_wl: regulator-wl { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_wl>; + compatible = "regulator-fixed"; + regulator-name = "wl"; + gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>; + startup-delay-us = <100>; + enable-active-high; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_bt: regulator-bt { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_bt>; + compatible = "regulator-fixed"; + regulator-name = "bt"; + gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>; + startup-delay-us = <100>; + enable-active-high; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; +}; + + +&ecspi3 { + cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi3>; + status = "okay"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii-id"; + status = "okay"; +}; + +&gpmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpmi_nand>; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + gpio@23 { + compatible = "nxp,pca9555"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + }; + + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + pagesize = <16>; + }; + + eeprom@51 { + compatible = "atmel,24c02"; + reg = <0x51>; + pagesize = <16>; + }; + + eeprom@52 { + compatible = "atmel,24c02"; + reg = <0x52>; + pagesize = <16>; + }; + + eeprom@53 { + compatible = "atmel,24c02"; + reg = <0x53>; + pagesize = <16>; + }; + + rtc@68 { + compatible = "dallas,ds1672"; + reg = <0x68>; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + accel@19 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_accel>; + compatible = "st,lis2de12"; + reg = <0x19>; + st,drdy-int-pin = <1>; + interrupt-parent = <&gpio7>; + interrupts = <13 0>; + interrupt-names = "INT1"; + }; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio3 20 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */ + status = "disabled"; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */ + status = "disabled"; +}; + +/* off-board RS232 */ +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +/* serial console */ +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +/* Sterling-LWB Bluetooth */ +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + uart-has-rtscts; + status = "okay"; +}; + +/* GPS */ +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_5p0v>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + status = "okay"; +}; + +&usbh1 { + status = "okay"; +}; + +/* Sterling-LWB SDIO WiFi */ +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + vmmc-supply = <®_3p3v>; + non-removable; + bus-width = <4>; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; + vmmc-supply = <®_3p3v>; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; +}; + +&iomuxc { + pinctrl_accel: accelmuxgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b1 + >; + }; + + pinctrl_ecspi3: escpi3grp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1 + MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1 + MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1 + MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x100b1 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 + MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x1b0b0 + >; + }; + + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 + MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 + >; + }; + + pinctrl_gpmi_nand: gpminandgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 + MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 + MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 + MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 + MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 + MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 + MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 + MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 + MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 + MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 + MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 + MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 + MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 + MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 + MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x0001b0b0 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x1b0b0 + >; + }; + + pinctrl_pps: ppsgrp { + fsl,pins = < + MX6QDL_PAD_DI0_DISP_CLK__GPIO4_IO16 0x1b0b1 + >; + }; + + pinctrl_pwm2: pwm2grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1 + >; + }; + + pinctrl_reg_bt: regbtgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b1 + >; + }; + + pinctrl_reg_wl: regwlgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x1b0b1 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1 + MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1 + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x17059 /* CD */ + MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x17059 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3grp100mhz { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x170b9 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9 + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170b9 /* CD */ + MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170b9 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3grp200mhz { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9 + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170f9 /* CD */ + MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170f9 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6qdl-gw5912.dtsi b/arch/arm/boot/dts/imx6qdl-gw5912.dtsi new file mode 100644 index 000000000000..8c57fd2f9a0b --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-gw5912.dtsi @@ -0,0 +1,461 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2019 Gateworks Corporation + */ + +#include <dt-bindings/gpio/gpio.h> + +/ { + /* these are used by bootloader for disabling nodes */ + aliases { + led0 = &led0; + led1 = &led1; + led2 = &led2; + nand = &gpmi; + usb0 = &usbh1; + usb1 = &usbotg; + }; + + chosen { + stdout-path = &uart2; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + + led0: user1 { + label = "user1"; + gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */ + default-state = "on"; + linux,default-trigger = "heartbeat"; + }; + + led1: user2 { + label = "user2"; + gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */ + default-state = "off"; + }; + + led2: user3 { + label = "user3"; + gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */ + default-state = "off"; + }; + }; + + memory@10000000 { + device_type = "memory"; + reg = <0x10000000 0x40000000>; + }; + + pps { + compatible = "pps-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pps>; + gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_usb_vbus: regulator-5p0v { + compatible = "regulator-fixed"; + regulator-name = "usb_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + status = "okay"; +}; + +&ecspi2 { + cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + status = "okay"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii-id"; + status = "okay"; +}; + +&gpmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpmi_nand>; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + gpio@23 { + compatible = "nxp,pca9555"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + }; + + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + pagesize = <16>; + }; + + eeprom@51 { + compatible = "atmel,24c02"; + reg = <0x51>; + pagesize = <16>; + }; + + eeprom@52 { + compatible = "atmel,24c02"; + reg = <0x52>; + pagesize = <16>; + }; + + eeprom@53 { + compatible = "atmel,24c02"; + reg = <0x53>; + pagesize = <16>; + }; + + rtc@68 { + compatible = "dallas,ds1672"; + reg = <0x68>; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + accel@19 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_accel>; + compatible = "st,lis2de12"; + reg = <0x19>; + st,drdy-int-pin = <1>; + interrupt-parent = <&gpio7>; + interrupts = <13 0>; + interrupt-names = "INT1"; + }; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; /* MX6_DIO0 */ + status = "disabled"; +}; + +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */ + status = "disabled"; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */ + status = "disabled"; +}; + +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; /* MX6_DIO3 */ + status = "disabled"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + rts-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + dr_mode = "host"; + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_usb_vbus>; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; + vmmc-supply = <®_3p3v>; + no-1-8-v; /* firmware will remove if board revision supports */ + status = "okay"; +}; + +&wdog1 { + status = "disabled"; +}; + +&wdog2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl_accel: accelmuxgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b1 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + >; + }; + + pinctrl_ecspi2: escpi2grp { + fsl,pins = < + MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1 + MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1 + MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1 + MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x100b1 + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1 + MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b1 + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x4001b0b0 + >; + }; + + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 + MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 + >; + }; + + pinctrl_gpmi_nand: gpminandgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 + MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 + MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 + MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 + MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 + MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 + MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 + MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 + MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 + MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 + MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 + MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 + MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 + MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 + MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x0001b0b0 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 + MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 + >; + }; + + pinctrl_pps: ppsgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x1b0b1 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm2: pwm2grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm4: pwm4grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x1b0b1 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x4001b0b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 + MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x4001b0b1 + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x17059 /* CD */ + MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x17059 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3grp100mhz { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9 + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170b9 /* CD */ + MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170b9 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3grp200mhz { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9 + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170f9 /* CD */ + MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170f9 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT3__WDOG2_B 0x1b0b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6qdl-gw5913.dtsi b/arch/arm/boot/dts/imx6qdl-gw5913.dtsi new file mode 100644 index 000000000000..635c203bd64d --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-gw5913.dtsi @@ -0,0 +1,348 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2019 Gateworks Corporation + */ + +#include <dt-bindings/gpio/gpio.h> + +/ { + /* these are used by bootloader for disabling nodes */ + aliases { + led0 = &led0; + led1 = &led1; + nand = &gpmi; + usb0 = &usbh1; + usb1 = &usbotg; + }; + + chosen { + stdout-path = &uart2; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + + led0: user1 { + label = "user1"; + gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */ + default-state = "on"; + linux,default-trigger = "heartbeat"; + }; + + led1: user2 { + label = "user2"; + gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */ + default-state = "off"; + }; + }; + + memory@10000000 { + device_type = "memory"; + reg = <0x10000000 0x20000000>; + }; + + pps { + compatible = "pps-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pps>; + gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>; + status = "okay"; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_5p0v: regulator-5p0v { + compatible = "regulator-fixed"; + regulator-name = "5P0V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii-id"; + status = "okay"; +}; + +&gpmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpmi_nand>; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + gpio@23 { + compatible = "nxp,pca9555"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + }; + + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + pagesize = <16>; + }; + + eeprom@51 { + compatible = "atmel,24c02"; + reg = <0x51>; + pagesize = <16>; + }; + + eeprom@52 { + compatible = "atmel,24c02"; + reg = <0x52>; + pagesize = <16>; + }; + + eeprom@53 { + compatible = "atmel,24c02"; + reg = <0x53>; + pagesize = <16>; + }; + + rtc@68 { + compatible = "dallas,ds1672"; + reg = <0x68>; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio1 0 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */ + status = "disabled"; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */ + status = "disabled"; +}; + +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; /* MX6_DIO3 */ + status = "disabled"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "okay"; +}; + +&usbotg { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + status = "okay"; +}; + +&usbh1 { + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; +}; + +&iomuxc { + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 + MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x1b0b0 + >; + }; + + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 + MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 + >; + }; + + pinctrl_gpmi_nand: gpminandgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 + MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 + MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 + MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 + MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 + MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 + MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 + MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 + MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 + MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 + MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 + MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 + MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 + MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 + MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x0001b0b0 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 + >; + }; + + pinctrl_pps: ppsgrp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b1 + >; + }; + + pinctrl_pwm2: pwm2grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm4: pwm4grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6qdl-icore-1.5.dtsi b/arch/arm/boot/dts/imx6qdl-icore-1.5.dtsi index d91d46b5898f..0fd7f2e24d9c 100644 --- a/arch/arm/boot/dts/imx6qdl-icore-1.5.dtsi +++ b/arch/arm/boot/dts/imx6qdl-icore-1.5.dtsi @@ -25,10 +25,8 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; - phy-reset-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>; clocks = <&clks IMX6QDL_CLK_ENET>, <&clks IMX6QDL_CLK_ENET>, <&clks IMX6QDL_CLK_ENET_REF>; - phy-mode = "rmii"; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-icore.dtsi b/arch/arm/boot/dts/imx6qdl-icore.dtsi index 7814f1ef0804..756f3a9f1b4f 100644 --- a/arch/arm/boot/dts/imx6qdl-icore.dtsi +++ b/arch/arm/boot/dts/imx6qdl-icore.dtsi @@ -150,10 +150,23 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; - phy-reset-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>; clocks = <&clks IMX6QDL_CLK_ENET>, <&clks IMX6QDL_CLK_ENET>, <&rmii_clk>; phy-mode = "rmii"; + phy-handle = <ð_phy>; status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + eth_phy: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + reset-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>; + reset-assert-us = <4000>; + reset-deassert-us = <4000>; + }; + }; }; &gpmi { diff --git a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi index 7a85116ef1d2..2418cf8f2317 100644 --- a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi @@ -556,8 +556,6 @@ non-removable; vmmc-supply = <®_3p3v>; vqmmc-supply = <®_wlan_vmmc>; - vqmmc-1-8-v; - ocr-limit = <0x180>; /* 1.65v - 2.1v */ cap-power-off-card; keep-power-in-suspend; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi index 82802f8ce7a0..d434868e870a 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi @@ -128,7 +128,7 @@ }; rtc@51 { - compatible = "nxp,rtc8564"; + compatible = "epson,rtc8564"; reg = <0x51>; }; diff --git a/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi index 6486df3e2942..978dc1c2ff1b 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi @@ -5,6 +5,7 @@ */ #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/regulator/dlg,da9063-regulator.h> / { aliases { @@ -100,6 +101,10 @@ compatible = "dlg,da9062-rtc"; }; + da9062_onkey: onkey { + compatible = "dlg,da9062-onkey"; + }; + watchdog { compatible = "dlg,da9062-watchdog"; }; @@ -109,6 +114,7 @@ regulator-name = "vdd_arm"; regulator-min-microvolt = <730000>; regulator-max-microvolt = <1380000>; + regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>; regulator-always-on; }; @@ -116,6 +122,7 @@ regulator-name = "vdd_soc"; regulator-min-microvolt = <730000>; regulator-max-microvolt = <1380000>; + regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>; regulator-always-on; }; @@ -123,6 +130,7 @@ regulator-name = "vdd_ddr3"; regulator-min-microvolt = <1500000>; regulator-max-microvolt = <1500000>; + regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>; regulator-always-on; }; @@ -130,6 +138,7 @@ regulator-name = "vdd_eth"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; + regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>; regulator-always-on; }; diff --git a/arch/arm/boot/dts/imx6qdl-rex.dtsi b/arch/arm/boot/dts/imx6qdl-rex.dtsi index 97f1659144ea..de514eb5aa99 100644 --- a/arch/arm/boot/dts/imx6qdl-rex.dtsi +++ b/arch/arm/boot/dts/imx6qdl-rex.dtsi @@ -132,6 +132,19 @@ pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; + pca9535: gpio-expander@27 { + compatible = "nxp,pca9535"; + reg = <0x27>; + gpio-controller; + #gpio-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pca9535>; + interrupt-parent = <&gpio6>; + interrupts = <16 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; + }; + eeprom@57 { compatible = "atmel,24c02"; reg = <0x57>; @@ -237,6 +250,12 @@ >; }; + pinctrl_pca9535: pca9535grp { + fsl,pins = < + MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x17059 + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi index f3404dd10537..cf628465cd0a 100644 --- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi @@ -230,6 +230,8 @@ accelerometer@1c { compatible = "fsl,mma8451"; reg = <0x1c>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mma8451_int>; interrupt-parent = <&gpio6>; interrupts = <31 IRQ_TYPE_LEVEL_LOW>; }; @@ -628,6 +630,12 @@ >; }; + pinctrl_mma8451_int: mma8451intgrp { + fsl,pins = < + MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0xb0b1 + >; + }; + pinctrl_pwm3: pwm1grp { fsl,pins = < MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1 diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi index 71ca76a5e4a5..fe59dde41b64 100644 --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi @@ -749,10 +749,6 @@ vin-supply = <&vgen5_reg>; }; -®_vdd3p0 { - vin-supply = <&sw2_reg>; -}; - ®_vdd2p5 { vin-supply = <&vgen5_reg>; }; diff --git a/arch/arm/boot/dts/imx6qdl-udoo.dtsi b/arch/arm/boot/dts/imx6qdl-udoo.dtsi index 776bfc77f89d..828dd20cd27d 100644 --- a/arch/arm/boot/dts/imx6qdl-udoo.dtsi +++ b/arch/arm/boot/dts/imx6qdl-udoo.dtsi @@ -210,6 +210,14 @@ >; }; + pinctrl_usbotg: usbotg { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + MX6QDL_PAD_EIM_D22__USB_OTG_PWR 0x17059 + MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x17059 + >; + }; + pinctrl_usdhc3: usdhc3grp { fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 @@ -287,6 +295,12 @@ status = "okay"; }; +&usbotg { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + status = "okay"; +}; + &usdhc3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3>; diff --git a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi index 50d9a989e06a..c070893c509e 100644 --- a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi +++ b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi @@ -33,6 +33,30 @@ spdif-out; }; + reg_1p5v: regulator-1p5v { + compatible = "regulator-fixed"; + regulator-name = "1P5V"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + }; + + reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-name = "1P8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + reg_2p8v: regulator-2p8v { + compatible = "regulator-fixed"; + regulator-name = "2P8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + reg_2p5v: regulator-2p5v { compatible = "regulator-fixed"; regulator-name = "2P5V"; @@ -94,6 +118,29 @@ VDDIO-supply = <®_3p3v>; lrclk-strength = <3>; }; + + camera@3c { + compatible = "ovti,ov5645"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ov5645>; + reg = <0x3c>; + clocks = <&clks IMX6QDL_CLK_CKO2>; + clock-names = "xclk"; + clock-frequency = <24000000>; + vdddo-supply = <®_1p8v>; + vdda-supply = <®_2p8v>; + vddd-supply = <®_1p5v>; + enable-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; + + port { + ov5645_to_mipi_csi2: endpoint { + remote-endpoint = <&mipi_csi2_in>; + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; + }; }; &iomuxc { @@ -128,7 +175,6 @@ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 - MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1 >; }; @@ -152,6 +198,14 @@ >; }; + pinctrl_ov5645: ov5645grp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__CCM_CLKO2 0x000b0 + MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x1b0b0 + MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x1b0b0 + >; + }; + pinctrl_spdif: spdifgrp { fsl,pins = < MX6QDL_PAD_ENET_RXD0__SPDIF_OUT 0x1b0b0 @@ -225,11 +279,32 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii-id"; + phy-handle = <ðphy>; phy-reset-gpios = <&gpio3 29 GPIO_ACTIVE_LOW>; - interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, - <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; - fsl,err006687-workaround-present; status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy: ethernet-phy@1 { + reg = <1>; + }; + }; +}; + +&mipi_csi { + status = "okay"; + + port@0 { + reg = <0>; + + mipi_csi2_in: endpoint { + remote-endpoint = <&ov5645_to_mipi_csi2>; + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; }; &spdif { diff --git a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi index 93be00a60c88..0075637f9b0b 100644 --- a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi @@ -60,18 +60,6 @@ regulator-always-on; }; - reg_5p0v_user_usb: regulator-5p0v-user-usb { - compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_reg_user_usb>; - vin-supply = <®_5p0v_main>; - regulator-name = "5V_USER_USB"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio3 22 GPIO_ACTIVE_LOW>; - startup-delay-us = <1000>; - }; - reg_3p3v_pmic: regulator-3p3v-pmic { compatible = "regulator-fixed"; vin-supply = <®_12p0v>; @@ -331,6 +319,39 @@ }; }; +&gpio3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio3_hog>; + + usb-emulation { + gpio-hog; + gpios = <19 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "usb-emulation"; + }; + + usb-mode1 { + gpio-hog; + gpios = <20 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "usb-mode1"; + }; + + usb-pwr { + gpio-hog; + gpios = <22 GPIO_ACTIVE_LOW>; + output-high; + line-name = "usb-pwr-ctrl-en-n"; + }; + + usb-mode2 { + gpio-hog; + gpios = <23 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "usb-mode2"; + }; +}; + &i2c1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; @@ -358,8 +379,10 @@ compatible = "fsl,mma8451"; reg = <0x1c>; interrupt-parent = <&gpio1>; - interrupt-names = "int1", "int2"; - interrupts = <18 IRQ_TYPE_LEVEL_LOW>, <20 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "INT2"; + interrupts = <20 IRQ_TYPE_LEVEL_LOW>; + vdd-supply = <®_3p3v>; + vddio-supply = <®_3p3v>; }; hpa2: amp@60 { @@ -590,6 +613,16 @@ status = "disabled"; }; + reg_5p0v_user_usb: charger@32 { + compatible = "microchip,ucs1002"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ucs1002_pins>; + reg = <0x32>; + interrupts-extended = <&gpio5 2 IRQ_TYPE_EDGE_BOTH>, + <&gpio3 21 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "a_det", "alert"; + }; + hpa1: amp@60 { compatible = "ti,tpa6130a2"; pinctrl-names = "default"; @@ -627,7 +660,7 @@ pinctrl-0 = <&pinctrl_usdhc2>; bus-width = <4>; cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; - wp-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>; + disable-wp; vmmc-supply = <®_3p3v_sd>; vqmmc-supply = <®_3p3v>; no-1-8-v; @@ -640,7 +673,7 @@ pinctrl-0 = <&pinctrl_usdhc3>; bus-width = <4>; cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; - wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; + disable-wp; vmmc-supply = <®_3p3v_sd>; vqmmc-supply = <®_3p3v>; no-1-8-v; @@ -774,6 +807,7 @@ &usbh1 { vbus-supply = <®_5p0v_main>; disable-over-current; + maximum-speed = "full-speed"; status = "okay"; }; @@ -849,7 +883,6 @@ &iomuxc { pinctrl_accel: accelgrp { fsl,pins = < - MX6QDL_PAD_SD1_CMD__GPIO1_IO18 0x4001b000 MX6QDL_PAD_SD1_CLK__GPIO1_IO20 0x4001b000 >; }; @@ -935,6 +968,15 @@ >; }; + pinctrl_gpio3_hog: gpio3hoggrp { + fsl,pins = < + MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x1b0b0 + MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x1b0b0 + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 + MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x1b0b0 + >; + }; + pinctrl_i2c1: i2c1grp { fsl,pins = < MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 @@ -982,12 +1024,6 @@ >; }; - pinctrl_reg_user_usb: usbotggrp { - fsl,pins = < - MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x40000038 - >; - }; - pinctrl_rmii_phy_irq: phygrp { fsl,pins = < MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x40010000 @@ -1047,6 +1083,13 @@ >; }; + pinctrl_ucs1002_pins: ucs1002grp { + fsl,pins = < + MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x1b0b0 + MX6QDL_PAD_EIM_D21__GPIO3_IO21 0x1b0b0 + >; + }; + pinctrl_usdhc2: usdhc2grp { fsl,pins = < MX6QDL_PAD_SD2_CMD__SD2_CMD 0x10059 @@ -1055,7 +1098,6 @@ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 - MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x40010040 MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x40010040 >; }; @@ -1068,7 +1110,6 @@ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 - MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x40010040 MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x40010040 >; diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index 4b801935cad1..e6b4b8525f98 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -171,8 +171,6 @@ gpmi: gpmi-nand@112000 { compatible = "fsl,imx6q-gpmi-nand"; - #address-cells = <1>; - #size-cells = <1>; reg = <0x00112000 0x2000>, <0x00114000 0x2000>; reg-names = "gpmi-nand", "bch"; interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>; @@ -695,7 +693,7 @@ }; anatop: anatop@20c8000 { - compatible = "fsl,imx6q-anatop", "syscon", "simple-bus"; + compatible = "fsl,imx6q-anatop", "syscon", "simple-mfd"; reg = <0x020c8000 0x1000>; interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>, <0 54 IRQ_TYPE_LEVEL_HIGH>, diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts index 4829aa682aeb..bc86cfaaa9c2 100644 --- a/arch/arm/boot/dts/imx6sl-evk.dts +++ b/arch/arm/boot/dts/imx6sl-evk.dts @@ -584,10 +584,6 @@ vin-supply = <&sw2_reg>; }; -®_vdd3p0 { - vin-supply = <&sw2_reg>; -}; - ®_vdd2p5 { vin-supply = <&sw2_reg>; }; diff --git a/arch/arm/boot/dts/imx6sl-tolino-shine3.dts b/arch/arm/boot/dts/imx6sl-tolino-shine3.dts new file mode 100644 index 000000000000..27143ea0f0f1 --- /dev/null +++ b/arch/arm/boot/dts/imx6sl-tolino-shine3.dts @@ -0,0 +1,322 @@ +// SPDX-License-Identifier: (GPL-2.0) +/* + * Device tree for the Tolino Shine 3 ebook reader + * + * Name on mainboard is: 37NB-E60K00+4A4 + * Serials start with: E60K02 (a number also seen in + * vendor kernel sources) + * + * This mainboard seems to be equipped with different SoCs. + * In the Toline Shine 3 ebook reader it is a i.MX6SL + * + * Copyright 2019 Andreas Kemnade + * based on works + * Copyright 2016 Freescale Semiconductor, Inc. + */ + +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> +#include "imx6sl.dtsi" +#include "e60k02.dtsi" + +/ { + model = "Tolino Shine 3"; + compatible = "kobo,tolino-shine3", "fsl,imx6sl"; +}; + +&gpio_keys { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; +}; + +&i2c1 { + pinctrl-names = "default","sleep"; + pinctrl-0 = <&pinctrl_i2c1>; + pinctrl-1 = <&pinctrl_i2c1_sleep>; +}; + +&i2c2 { + pinctrl-names = "default","sleep"; + pinctrl-0 = <&pinctrl_i2c2>; + pinctrl-1 = <&pinctrl_i2c2_sleep>; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_gpio_keys: gpio-keysgrp { + fsl,pins = < + MX6SL_PAD_SD1_DAT1__GPIO5_IO08 0x17059 /* PWR_SW */ + MX6SL_PAD_SD1_DAT4__GPIO5_IO12 0x17059 /* HALL_EN */ + >; + }; + + pinctrl_hog: hoggrp { + fsl,pins = < + MX6SL_PAD_LCD_DAT0__GPIO2_IO20 0x79 + MX6SL_PAD_LCD_DAT1__GPIO2_IO21 0x79 + MX6SL_PAD_LCD_DAT2__GPIO2_IO22 0x79 + MX6SL_PAD_LCD_DAT3__GPIO2_IO23 0x79 + MX6SL_PAD_LCD_DAT4__GPIO2_IO24 0x79 + MX6SL_PAD_LCD_DAT5__GPIO2_IO25 0x79 + MX6SL_PAD_LCD_DAT6__GPIO2_IO26 0x79 + MX6SL_PAD_LCD_DAT7__GPIO2_IO27 0x79 + MX6SL_PAD_LCD_DAT8__GPIO2_IO28 0x79 + MX6SL_PAD_LCD_DAT9__GPIO2_IO29 0x79 + MX6SL_PAD_LCD_DAT10__GPIO2_IO30 0x79 + MX6SL_PAD_LCD_DAT11__GPIO2_IO31 0x79 + MX6SL_PAD_LCD_DAT12__GPIO3_IO00 0x79 + MX6SL_PAD_LCD_DAT13__GPIO3_IO01 0x79 + MX6SL_PAD_LCD_DAT14__GPIO3_IO02 0x79 + MX6SL_PAD_LCD_DAT15__GPIO3_IO03 0x79 + MX6SL_PAD_LCD_DAT16__GPIO3_IO04 0x79 + MX6SL_PAD_LCD_DAT17__GPIO3_IO05 0x79 + MX6SL_PAD_LCD_DAT18__GPIO3_IO06 0x79 + MX6SL_PAD_LCD_DAT19__GPIO3_IO07 0x79 + MX6SL_PAD_LCD_DAT20__GPIO3_IO08 0x79 + MX6SL_PAD_LCD_DAT21__GPIO3_IO09 0x79 + MX6SL_PAD_LCD_DAT22__GPIO3_IO10 0x79 + MX6SL_PAD_LCD_DAT23__GPIO3_IO11 0x79 + MX6SL_PAD_LCD_CLK__GPIO2_IO15 0x79 + MX6SL_PAD_LCD_ENABLE__GPIO2_IO16 0x79 + MX6SL_PAD_LCD_HSYNC__GPIO2_IO17 0x79 + MX6SL_PAD_LCD_VSYNC__GPIO2_IO18 0x79 + MX6SL_PAD_LCD_RESET__GPIO2_IO19 0x79 + MX6SL_PAD_KEY_COL3__GPIO3_IO30 0x79 + MX6SL_PAD_KEY_ROW7__GPIO4_IO07 0x79 + MX6SL_PAD_ECSPI2_MOSI__GPIO4_IO13 0x79 + MX6SL_PAD_KEY_COL5__GPIO4_IO02 0x79 + MX6SL_PAD_KEY_ROW6__GPIO4_IO05 0x79 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6SL_PAD_I2C1_SCL__I2C1_SCL 0x4001f8b1 + MX6SL_PAD_I2C1_SDA__I2C1_SDA 0x4001f8b1 + >; + }; + + pinctrl_i2c1_sleep: i2c1grp-sleep { + fsl,pins = < + MX6SL_PAD_I2C1_SCL__I2C1_SCL 0x400108b1 + MX6SL_PAD_I2C1_SDA__I2C1_SDA 0x400108b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6SL_PAD_I2C2_SCL__I2C2_SCL 0x4001f8b1 + MX6SL_PAD_I2C2_SDA__I2C2_SDA 0x4001f8b1 + >; + }; + + pinctrl_i2c2_sleep: i2c2grp-sleep { + fsl,pins = < + MX6SL_PAD_I2C2_SCL__I2C2_SCL 0x400108b1 + MX6SL_PAD_I2C2_SDA__I2C2_SDA 0x400108b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6SL_PAD_REF_CLK_24M__I2C3_SCL 0x4001f8b1 + MX6SL_PAD_REF_CLK_32K__I2C3_SDA 0x4001f8b1 + >; + }; + + pinctrl_led: ledgrp { + fsl,pins = < + MX6SL_PAD_SD1_DAT6__GPIO5_IO07 0x17059 + >; + }; + + pinctrl_lm3630a_bl_gpio: lm3630a-bl-gpiogrp { + fsl,pins = < + MX6SL_PAD_EPDC_PWRCTRL3__GPIO2_IO10 0x10059 /* HWEN */ + >; + }; + + pinctrl_ricoh_gpio: ricoh_gpiogrp { + fsl,pins = < + MX6SL_PAD_SD1_CLK__GPIO5_IO15 0x1b8b1 /* ricoh619 chg */ + MX6SL_PAD_SD1_DAT0__GPIO5_IO11 0x1b8b1 /* ricoh619 irq */ + MX6SL_PAD_KEY_COL2__GPIO3_IO28 0x1b8b1 /* ricoh619 bat_low_int */ + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6SL_PAD_UART1_TXD__UART1_TX_DATA 0x1b0b1 + MX6SL_PAD_UART1_RXD__UART1_TX_DATA 0x1b0b1 + >; + }; + + pinctrl_usbotg1: usbotg1grp { + fsl,pins = < + MX6SL_PAD_EPDC_PWRCOM__USB_OTG1_ID 0x17059 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6SL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6SL_PAD_SD2_CLK__SD2_CLK 0x13059 + MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2grp-100mhz { + fsl,pins = < + MX6SL_PAD_SD2_CMD__SD2_CMD 0x170b9 + MX6SL_PAD_SD2_CLK__SD2_CLK 0x130b9 + MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x170b9 + MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x170b9 + MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x170b9 + MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x170b9 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2grp-200mhz { + fsl,pins = < + MX6SL_PAD_SD2_CMD__SD2_CMD 0x170f9 + MX6SL_PAD_SD2_CLK__SD2_CLK 0x130f9 + MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x170f9 + MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x170f9 + MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x170f9 + MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x170f9 + >; + }; + + pinctrl_usdhc2_sleep: usdhc2grp-sleep { + fsl,pins = < + MX6SL_PAD_SD2_CMD__GPIO5_IO04 0x100f9 + MX6SL_PAD_SD2_CLK__GPIO5_IO05 0x100f9 + MX6SL_PAD_SD2_DAT0__GPIO5_IO01 0x100f9 + MX6SL_PAD_SD2_DAT1__GPIO4_IO30 0x100f9 + MX6SL_PAD_SD2_DAT2__GPIO5_IO03 0x100f9 + MX6SL_PAD_SD2_DAT3__GPIO4_IO28 0x100f9 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6SL_PAD_SD3_CMD__SD3_CMD 0x11059 + MX6SL_PAD_SD3_CLK__SD3_CLK 0x11059 + MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x11059 + MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x11059 + MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x11059 + MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x11059 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3grp-100mhz { + fsl,pins = < + MX6SL_PAD_SD3_CMD__SD3_CMD 0x170b9 + MX6SL_PAD_SD3_CLK__SD3_CLK 0x170b9 + MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x170b9 + MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x170b9 + MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x170b9 + MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x170b9 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3grp-200mhz { + fsl,pins = < + MX6SL_PAD_SD3_CMD__SD3_CMD 0x170f9 + MX6SL_PAD_SD3_CLK__SD3_CLK 0x170f9 + MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x170f9 + MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x170f9 + MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x170f9 + MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x170f9 + >; + }; + + pinctrl_usdhc3_sleep: usdhc3grp-sleep { + fsl,pins = < + MX6SL_PAD_SD3_CMD__GPIO5_IO21 0x100c1 + MX6SL_PAD_SD3_CLK__GPIO5_IO18 0x100c1 + MX6SL_PAD_SD3_DAT0__GPIO5_IO19 0x100c1 + MX6SL_PAD_SD3_DAT1__GPIO5_IO20 0x100c1 + MX6SL_PAD_SD3_DAT2__GPIO5_IO16 0x100c1 + MX6SL_PAD_SD3_DAT3__GPIO5_IO17 0x100c1 + >; + }; + + pinctrl_wifi_power: wifi-powergrp { + fsl,pins = < + MX6SL_PAD_SD2_DAT6__GPIO4_IO29 0x10059 /* WIFI_3V3_ON */ + >; + }; + + pinctrl_wifi_reset: wifi-resetgrp { + fsl,pins = < + MX6SL_PAD_SD2_DAT7__GPIO5_IO00 0x10059 /* WIFI_RST */ + >; + }; +}; + +&leds { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_led>; +}; + +&lm3630a { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lm3630a_bl_gpio>; +}; + +®_wifi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wifi_power>; +}; + +®_vdd1p1 { + vin-supply = <&dcdc2_reg>; +}; + +®_vdd2p5 { + vin-supply = <&dcdc2_reg>; +}; + +&ricoh619 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ricoh_gpio>; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; + pinctrl-0 = <&pinctrl_usdhc2>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>; + pinctrl-3 = <&pinctrl_usdhc2_sleep>; +}; + +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + pinctrl-3 = <&pinctrl_usdhc3_sleep>; +}; + +&wifi_pwrseq { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wifi_reset>; +}; diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index b36fc012ff06..59c54e6ad09a 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -77,15 +77,6 @@ }; }; - intc: interrupt-controller@a01000 { - compatible = "arm,cortex-a9-gic"; - #interrupt-cells = <3>; - interrupt-controller; - reg = <0x00a01000 0x1000>, - <0x00a00100 0x100>; - interrupt-parent = <&intc>; - }; - clocks { ckil { compatible = "fixed-clock"; @@ -133,6 +124,15 @@ clocks = <&clks IMX6SL_CLK_OCRAM>; }; + intc: interrupt-controller@a01000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x00a01000 0x1000>, + <0x00a00100 0x100>; + interrupt-parent = <&intc>; + }; + L2: l2-cache@a02000 { compatible = "arm,pl310-cache"; reg = <0x00a02000 0x1000>; @@ -525,7 +525,7 @@ anatop: anatop@20c8000 { compatible = "fsl,imx6sl-anatop", "fsl,imx6q-anatop", - "syscon", "simple-bus"; + "syscon", "simple-mfd"; reg = <0x020c8000 0x1000>; interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>, <0 54 IRQ_TYPE_LEVEL_HIGH>, diff --git a/arch/arm/boot/dts/imx6sll-evk.dts b/arch/arm/boot/dts/imx6sll-evk.dts index 3e1d32fdf4b8..5ace9e6acf85 100644 --- a/arch/arm/boot/dts/imx6sll-evk.dts +++ b/arch/arm/boot/dts/imx6sll-evk.dts @@ -265,10 +265,6 @@ status = "okay"; }; -®_3p0 { - vin-supply = <&sw2_reg>; -}; - &snvs_poweroff { status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6sll-kobo-clarahd.dts b/arch/arm/boot/dts/imx6sll-kobo-clarahd.dts new file mode 100644 index 000000000000..7214d1c98249 --- /dev/null +++ b/arch/arm/boot/dts/imx6sll-kobo-clarahd.dts @@ -0,0 +1,324 @@ +// SPDX-License-Identifier: (GPL-2.0) +/* + * Device tree for the Kobo Clara HD ebook reader + * + * Name on mainboard is: 37NB-E60K00+4A4 + * Serials start with: E60K02 (a number also seen in + * vendor kernel sources) + * + * This mainboard seems to be equipped with different SoCs. + * In the Kobo Clara HD ebook reader it is an i.MX6SLL + * + * Copyright 2019 Andreas Kemnade + * based on works + * Copyright 2016 Freescale Semiconductor, Inc. + */ + +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> +#include "imx6sll.dtsi" +#include "e60k02.dtsi" + +/ { + model = "Kobo Clara HD"; + compatible = "kobo,clarahd", "fsl,imx6sll"; +}; + +&clks { + assigned-clocks = <&clks IMX6SLL_CLK_PLL4_AUDIO_DIV>; + assigned-clock-rates = <393216000>; +}; + +&cpu0 { + arm-supply = <&dcdc3_reg>; + soc-supply = <&dcdc1_reg>; +}; + +&gpio_keys { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; +}; + +&i2c1 { + pinctrl-names = "default","sleep"; + pinctrl-0 = <&pinctrl_i2c1>; + pinctrl-1 = <&pinctrl_i2c1_sleep>; +}; + +&i2c2 { + pinctrl-names = "default","sleep"; + pinctrl-0 = <&pinctrl_i2c2>; + pinctrl-1 = <&pinctrl_i2c2_sleep>; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_gpio_keys: gpio-keysgrp { + fsl,pins = < + MX6SLL_PAD_SD1_DATA1__GPIO5_IO08 0x17059 /* PWR_SW */ + MX6SLL_PAD_SD1_DATA4__GPIO5_IO12 0x17059 /* HALL_EN */ + >; + }; + + pinctrl_hog: hoggrp { + fsl,pins = < + MX6SLL_PAD_LCD_DATA00__GPIO2_IO20 0x79 + MX6SLL_PAD_LCD_DATA01__GPIO2_IO21 0x79 + MX6SLL_PAD_LCD_DATA02__GPIO2_IO22 0x79 + MX6SLL_PAD_LCD_DATA03__GPIO2_IO23 0x79 + MX6SLL_PAD_LCD_DATA04__GPIO2_IO24 0x79 + MX6SLL_PAD_LCD_DATA05__GPIO2_IO25 0x79 + MX6SLL_PAD_LCD_DATA06__GPIO2_IO26 0x79 + MX6SLL_PAD_LCD_DATA07__GPIO2_IO27 0x79 + MX6SLL_PAD_LCD_DATA08__GPIO2_IO28 0x79 + MX6SLL_PAD_LCD_DATA09__GPIO2_IO29 0x79 + MX6SLL_PAD_LCD_DATA10__GPIO2_IO30 0x79 + MX6SLL_PAD_LCD_DATA11__GPIO2_IO31 0x79 + MX6SLL_PAD_LCD_DATA12__GPIO3_IO00 0x79 + MX6SLL_PAD_LCD_DATA13__GPIO3_IO01 0x79 + MX6SLL_PAD_LCD_DATA14__GPIO3_IO02 0x79 + MX6SLL_PAD_LCD_DATA15__GPIO3_IO03 0x79 + MX6SLL_PAD_LCD_DATA16__GPIO3_IO04 0x79 + MX6SLL_PAD_LCD_DATA17__GPIO3_IO05 0x79 + MX6SLL_PAD_LCD_DATA18__GPIO3_IO06 0x79 + MX6SLL_PAD_LCD_DATA19__GPIO3_IO07 0x79 + MX6SLL_PAD_LCD_DATA20__GPIO3_IO08 0x79 + MX6SLL_PAD_LCD_DATA21__GPIO3_IO09 0x79 + MX6SLL_PAD_LCD_DATA22__GPIO3_IO10 0x79 + MX6SLL_PAD_LCD_DATA23__GPIO3_IO11 0x79 + MX6SLL_PAD_LCD_CLK__GPIO2_IO15 0x79 + MX6SLL_PAD_LCD_ENABLE__GPIO2_IO16 0x79 + MX6SLL_PAD_LCD_HSYNC__GPIO2_IO17 0x79 + MX6SLL_PAD_LCD_VSYNC__GPIO2_IO18 0x79 + MX6SLL_PAD_LCD_RESET__GPIO2_IO19 0x79 + MX6SLL_PAD_KEY_COL3__GPIO3_IO30 0x79 + MX6SLL_PAD_KEY_ROW7__GPIO4_IO07 0x79 + MX6SLL_PAD_ECSPI2_MOSI__GPIO4_IO13 0x79 + MX6SLL_PAD_KEY_COL5__GPIO4_IO02 0x79 + MX6SLL_PAD_KEY_ROW6__GPIO4_IO05 0x79 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6SLL_PAD_I2C1_SCL__I2C1_SCL 0x4001f8b1 + MX6SLL_PAD_I2C1_SDA__I2C1_SDA 0x4001f8b1 + >; + }; + + pinctrl_i2c1_sleep: i2c1grp-sleep { + fsl,pins = < + MX6SLL_PAD_I2C1_SCL__I2C1_SCL 0x400108b1 + MX6SLL_PAD_I2C1_SDA__I2C1_SDA 0x400108b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6SLL_PAD_I2C2_SCL__I2C2_SCL 0x4001f8b1 + MX6SLL_PAD_I2C2_SDA__I2C2_SDA 0x4001f8b1 + >; + }; + + pinctrl_i2c2_sleep: i2c2grp-sleep { + fsl,pins = < + MX6SLL_PAD_I2C2_SCL__I2C2_SCL 0x400108b1 + MX6SLL_PAD_I2C2_SDA__I2C2_SDA 0x400108b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6SLL_PAD_REF_CLK_24M__I2C3_SCL 0x4001f8b1 + MX6SLL_PAD_REF_CLK_32K__I2C3_SDA 0x4001f8b1 + >; + }; + + pinctrl_led: ledgrp { + fsl,pins = < + MX6SLL_PAD_SD1_DATA6__GPIO5_IO07 0x17059 + >; + }; + + pinctrl_lm3630a_bl_gpio: lm3630a-bl-gpiogrp { + fsl,pins = < + MX6SLL_PAD_EPDC_PWR_CTRL3__GPIO2_IO10 0x10059 /* HWEN */ + >; + }; + + pinctrl_ricoh_gpio: ricoh-gpiogrp { + fsl,pins = < + MX6SLL_PAD_SD1_CLK__GPIO5_IO15 0x1b8b1 /* ricoh619 chg */ + MX6SLL_PAD_SD1_DATA0__GPIO5_IO11 0x1b8b1 /* ricoh619 irq */ + MX6SLL_PAD_KEY_COL2__GPIO3_IO28 0x1b8b1 /* ricoh619 bat_low_int */ + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6SLL_PAD_UART1_TXD__UART1_DCE_TX 0x1b0b1 + MX6SLL_PAD_UART1_RXD__UART1_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_usbotg1: usbotg1grp { + fsl,pins = < + MX6SLL_PAD_EPDC_PWR_COM__USB_OTG1_ID 0x17059 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6SLL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6SLL_PAD_SD2_CLK__SD2_CLK 0x13059 + MX6SLL_PAD_SD2_DATA0__SD2_DATA0 0x17059 + MX6SLL_PAD_SD2_DATA1__SD2_DATA1 0x17059 + MX6SLL_PAD_SD2_DATA2__SD2_DATA2 0x17059 + MX6SLL_PAD_SD2_DATA3__SD2_DATA3 0x17059 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2grp-100mhz { + fsl,pins = < + MX6SLL_PAD_SD2_CMD__SD2_CMD 0x170b9 + MX6SLL_PAD_SD2_CLK__SD2_CLK 0x130b9 + MX6SLL_PAD_SD2_DATA0__SD2_DATA0 0x170b9 + MX6SLL_PAD_SD2_DATA1__SD2_DATA1 0x170b9 + MX6SLL_PAD_SD2_DATA2__SD2_DATA2 0x170b9 + MX6SLL_PAD_SD2_DATA3__SD2_DATA3 0x170b9 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2grp-200mhz { + fsl,pins = < + MX6SLL_PAD_SD2_CMD__SD2_CMD 0x170f9 + MX6SLL_PAD_SD2_CLK__SD2_CLK 0x130f9 + MX6SLL_PAD_SD2_DATA0__SD2_DATA0 0x170f9 + MX6SLL_PAD_SD2_DATA1__SD2_DATA1 0x170f9 + MX6SLL_PAD_SD2_DATA2__SD2_DATA2 0x170f9 + MX6SLL_PAD_SD2_DATA3__SD2_DATA3 0x170f9 + >; + }; + + pinctrl_usdhc2_sleep: usdhc2grp-sleep { + fsl,pins = < + MX6SLL_PAD_SD2_CMD__GPIO5_IO04 0x100f9 + MX6SLL_PAD_SD2_CLK__GPIO5_IO05 0x100f9 + MX6SLL_PAD_SD2_DATA0__GPIO5_IO01 0x100f9 + MX6SLL_PAD_SD2_DATA1__GPIO4_IO30 0x100f9 + MX6SLL_PAD_SD2_DATA2__GPIO5_IO03 0x100f9 + MX6SLL_PAD_SD2_DATA3__GPIO4_IO28 0x100f9 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6SLL_PAD_SD3_CMD__SD3_CMD 0x11059 + MX6SLL_PAD_SD3_CLK__SD3_CLK 0x11059 + MX6SLL_PAD_SD3_DATA0__SD3_DATA0 0x11059 + MX6SLL_PAD_SD3_DATA1__SD3_DATA1 0x11059 + MX6SLL_PAD_SD3_DATA2__SD3_DATA2 0x11059 + MX6SLL_PAD_SD3_DATA3__SD3_DATA3 0x11059 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3grp-100mhz { + fsl,pins = < + MX6SLL_PAD_SD3_CMD__SD3_CMD 0x170b9 + MX6SLL_PAD_SD3_CLK__SD3_CLK 0x170b9 + MX6SLL_PAD_SD3_DATA0__SD3_DATA0 0x170b9 + MX6SLL_PAD_SD3_DATA1__SD3_DATA1 0x170b9 + MX6SLL_PAD_SD3_DATA2__SD3_DATA2 0x170b9 + MX6SLL_PAD_SD3_DATA3__SD3_DATA3 0x170b9 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3grp-200mhz { + fsl,pins = < + MX6SLL_PAD_SD3_CMD__SD3_CMD 0x170f9 + MX6SLL_PAD_SD3_CLK__SD3_CLK 0x170f9 + MX6SLL_PAD_SD3_DATA0__SD3_DATA0 0x170f9 + MX6SLL_PAD_SD3_DATA1__SD3_DATA1 0x170f9 + MX6SLL_PAD_SD3_DATA2__SD3_DATA2 0x170f9 + MX6SLL_PAD_SD3_DATA3__SD3_DATA3 0x170f9 + >; + }; + + pinctrl_usdhc3_sleep: usdhc3grp-sleep { + fsl,pins = < + MX6SLL_PAD_SD3_CMD__GPIO5_IO21 0x100c1 + MX6SLL_PAD_SD3_CLK__GPIO5_IO18 0x100c1 + MX6SLL_PAD_SD3_DATA0__GPIO5_IO19 0x100c1 + MX6SLL_PAD_SD3_DATA1__GPIO5_IO20 0x100c1 + MX6SLL_PAD_SD3_DATA2__GPIO5_IO16 0x100c1 + MX6SLL_PAD_SD3_DATA3__GPIO5_IO17 0x100c1 + >; + }; + + pinctrl_wifi_power: wifi-powergrp { + fsl,pins = < + MX6SLL_PAD_SD2_DATA6__GPIO4_IO29 0x10059 /* WIFI_3V3_ON */ + >; + }; + + pinctrl_wifi_reset: wifi-resetgrp { + fsl,pins = < + MX6SLL_PAD_SD2_DATA7__GPIO5_IO00 0x10059 /* WIFI_RST */ + >; + }; +}; + +&leds { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_led>; +}; + +&lm3630a { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lm3630a_bl_gpio>; +}; + +®_wifi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wifi_power>; +}; + +&ricoh619 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ricoh_gpio>; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz","sleep"; + pinctrl-0 = <&pinctrl_usdhc2>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>; + pinctrl-3 = <&pinctrl_usdhc2_sleep>; +}; + +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz","sleep"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + pinctrl-3 = <&pinctrl_usdhc3_sleep>; +}; + +&wifi_pwrseq { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wifi_reset>; +}; diff --git a/arch/arm/boot/dts/imx6sll.dtsi b/arch/arm/boot/dts/imx6sll.dtsi index b0a77ff70b67..a1bc5bb31756 100644 --- a/arch/arm/boot/dts/imx6sll.dtsi +++ b/arch/arm/boot/dts/imx6sll.dtsi @@ -75,15 +75,6 @@ }; }; - intc: interrupt-controller@a01000 { - compatible = "arm,cortex-a9-gic"; - #interrupt-cells = <3>; - interrupt-controller; - reg = <0x00a01000 0x1000>, - <0x00a00100 0x100>; - interrupt-parent = <&intc>; - }; - ckil: clock-ckil { compatible = "fixed-clock"; #clock-cells = <0>; @@ -134,6 +125,15 @@ reg = <0x00900000 0x20000>; }; + intc: interrupt-controller@a01000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x00a01000 0x1000>, + <0x00a00100 0x100>; + interrupt-parent = <&intc>; + }; + L2: l2-cache@a02000 { compatible = "arm,pl310-cache"; reg = <0x00a02000 0x1000>; @@ -234,7 +234,7 @@ compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x02018000 0x4000>; - interrupts =<GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; dmas = <&sdma 31 4 0>, <&sdma 32 4 0>; dma-names = "rx", "tx"; clocks = <&clks IMX6SLL_CLK_UART4_IPG>, @@ -507,7 +507,7 @@ anatop: anatop@20c8000 { compatible = "fsl,imx6sll-anatop", "fsl,imx6q-anatop", - "syscon", "simple-bus"; + "syscon", "simple-mfd"; reg = <0x020c8000 0x4000>; interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, @@ -621,7 +621,7 @@ }; sdma: dma-controller@20ec000 { - compatible = "fsl,imx6sll-sdma", "fsl,imx35-sdma"; + compatible = "fsl,imx6sll-sdma", "fsl,imx6ul-sdma"; reg = <0x020ec000 0x4000>; interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6SLL_CLK_IPG>, @@ -632,6 +632,15 @@ fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin"; }; + pxp: pxp@20f0000 { + compatible = "fsl,imx6sll-pxp", "fsl,imx6ull-pxp"; + reg = <0x20f0000 0x4000>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_PXP>; + clock-names = "axi"; + }; + lcdif: lcd-controller@20f8000 { compatible = "fsl,imx6sll-lcdif", "fsl,imx28-lcdif"; reg = <0x020f8000 0x4000>; @@ -801,7 +810,7 @@ compatible = "fsl,imx6sll-uart", "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x021f4000 0x4000>; - interrupts =<GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; dmas = <&sdma 33 4 0>, <&sdma 34 4 0>; dma-names = "rx", "tx"; clocks = <&clks IMX6SLL_CLK_UART5_IPG>, diff --git a/arch/arm/boot/dts/imx6sx-sdb-reva.dts b/arch/arm/boot/dts/imx6sx-sdb-reva.dts index f1830ed387a5..dce5dcf96c25 100644 --- a/arch/arm/boot/dts/imx6sx-sdb-reva.dts +++ b/arch/arm/boot/dts/imx6sx-sdb-reva.dts @@ -6,6 +6,7 @@ / { model = "Freescale i.MX6 SoloX SDB RevA Board"; + compatible = "fsl,imx6sx-sdb-reva", "fsl,imx6sx"; }; &i2c1 { @@ -159,10 +160,6 @@ vin-supply = <&vgen6_reg>; }; -®_vdd3p0 { - vin-supply = <&sw2_reg>; -}; - ®_vdd2p5 { vin-supply = <&vgen6_reg>; }; diff --git a/arch/arm/boot/dts/imx6sx-sdb.dts b/arch/arm/boot/dts/imx6sx-sdb.dts index a8ee7087af5a..5a63ca615722 100644 --- a/arch/arm/boot/dts/imx6sx-sdb.dts +++ b/arch/arm/boot/dts/imx6sx-sdb.dts @@ -141,10 +141,6 @@ vin-supply = <&vgen6_reg>; }; -®_vdd3p0 { - vin-supply = <&sw2_reg>; -}; - ®_vdd2p5 { vin-supply = <&vgen6_reg>; }; diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index bb25add90f19..59bad60a47dc 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -90,15 +90,6 @@ }; }; - intc: interrupt-controller@a01000 { - compatible = "arm,cortex-a9-gic"; - #interrupt-cells = <3>; - interrupt-controller; - reg = <0x00a01000 0x1000>, - <0x00a00100 0x100>; - interrupt-parent = <&intc>; - }; - ckil: clock-ckil { compatible = "fixed-clock"; #clock-cells = <0>; @@ -181,6 +172,15 @@ clocks = <&clks IMX6SX_CLK_OCRAM>; }; + intc: interrupt-controller@a01000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x00a01000 0x1000>, + <0x00a00100 0x100>; + interrupt-parent = <&intc>; + }; + L2: l2-cache@a02000 { compatible = "arm,pl310-cache"; reg = <0x00a02000 0x1000>; @@ -594,7 +594,7 @@ anatop: anatop@20c8000 { compatible = "fsl,imx6sx-anatop", "fsl,imx6q-anatop", - "syscon", "simple-bus"; + "syscon", "simple-mfd"; reg = <0x020c8000 0x1000>; interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, @@ -926,8 +926,8 @@ <&clks IMX6SX_CLK_ENET_PTP>; clock-names = "ipg", "ahb", "ptp", "enet_clk_ref", "enet_out"; - fsl,num-tx-queues=<3>; - fsl,num-rx-queues=<3>; + fsl,num-tx-queues = <3>; + fsl,num-rx-queues = <3>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi index c2a9dd57e56a..265bf4108cb6 100644 --- a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi +++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi @@ -30,6 +30,28 @@ enable-active-high; }; + reg_peri_3v3: regulator-peri-3v3 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_peri_3v3>; + regulator-name = "VPERI_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio5 2 GPIO_ACTIVE_LOW>; + /* + * If you want to want to make this dynamic please + * check schematics and test all affected peripherals: + * + * - sensors + * - ethernet phy + * - can + * - bluetooth + * - wm8960 audio codec + * - ov5640 camera + */ + regulator-always-on; + }; + reg_can_3v3: regulator-can-3v3 { compatible = "regulator-fixed"; regulator-name = "can-3v3"; @@ -130,6 +152,7 @@ pinctrl-0 = <&pinctrl_enet1>; phy-mode = "rmii"; phy-handle = <ðphy0>; + phy-supply = <®_peri_3v3>; status = "okay"; }; @@ -138,6 +161,7 @@ pinctrl-0 = <&pinctrl_enet2>; phy-mode = "rmii"; phy-handle = <ðphy1>; + phy-supply = <®_peri_3v3>; status = "okay"; mdio { @@ -180,9 +204,11 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - mag3110@e { + magnetometer@e { compatible = "fsl,mag3110"; reg = <0x0e>; + vdd-supply = <®_peri_3v3>; + vddio-supply = <®_peri_3v3>; }; }; @@ -215,7 +241,7 @@ flash0: n25q256a@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "micron,n25q256a"; + compatible = "micron,n25q256a", "jedec,spi-nor"; spi-max-frequency = <29000000>; spi-rx-bus-width = <4>; spi-tx-bus-width = <4>; @@ -266,6 +292,8 @@ &usbotg1 { dr_mode = "otg"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_otg1>; status = "okay"; }; @@ -299,6 +327,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc2>; no-1-8-v; + broken-cd; keep-power-in-suspend; wakeup-source; status = "okay"; @@ -448,6 +477,12 @@ >; }; + pinctrl_peri_3v3: peri3v3grp { + fsl,pins = < + MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x1b0b0 + >; + }; + pinctrl_pwm1: pwm1grp { fsl,pins = < MX6UL_PAD_GPIO1_IO08__PWM1_OUT 0x110b0 @@ -499,6 +534,12 @@ >; }; + pinctrl_usb_otg1: usbotg1grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID 0x17059 + >; + }; + pinctrl_usdhc1: usdhc1grp { fsl,pins = < MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059 diff --git a/arch/arm/boot/dts/imx6ul-imx6ull-opos6ul.dtsi b/arch/arm/boot/dts/imx6ul-imx6ull-opos6ul.dtsi new file mode 100644 index 000000000000..f2386dcb9ff2 --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-imx6ull-opos6ul.dtsi @@ -0,0 +1,148 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +// +// Copyright 2019 Armadeus Systems <support@armadeus.com> + +/ { + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0>; /* will be filled by U-Boot */ + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + usdhc3_pwrseq: usdhc3-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio2 9 GPIO_ACTIVE_LOW>; + }; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>; + phy-mode = "rmii"; + phy-reset-duration = <1>; + phy-reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>; + phy-handle = <ðphy1>; + phy-supply = <®_3v3>; + status = "okay"; + + mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + interrupt-parent = <&gpio4>; + interrupts = <16 IRQ_TYPE_LEVEL_LOW>; + status = "okay"; + }; + }; +}; + +/* Bluetooth */ +&uart8 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart8>; + uart-has-rtscts; + status = "okay"; +}; + +/* eMMC */ +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + bus-width = <8>; + no-1-8-v; + non-removable; + status = "okay"; +}; + +/* WiFi */ +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + bus-width = <4>; + no-1-8-v; + non-removable; + mmc-pwrseq = <&usdhc3_pwrseq>; + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + + brcmf: wifi@1 { + compatible = "brcm,bcm4329-fmac"; + reg = <1>; + interrupt-parent = <&gpio2>; + interrupts = <8 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "host-wake"; + }; +}; + +&iomuxc { + pinctrl_enet1: enet1grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x1b0b0 + MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x1b0b0 + MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x130b0 + MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x130b0 + MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x130b0 + MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x130b0 + MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0 + /* INT# */ + MX6UL_PAD_NAND_DQS__GPIO4_IO16 0x1b0b0 + /* RST# */ + MX6UL_PAD_NAND_DATA00__GPIO4_IO02 0x130b0 + MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b031 + >; + }; + + pinctrl_uart8: uart8grp { + fsl,pins = < + MX6UL_PAD_ENET2_TX_EN__UART8_DCE_RX 0x1b0b0 + MX6UL_PAD_ENET2_TX_DATA1__UART8_DCE_TX 0x1b0b0 + MX6UL_PAD_ENET2_RX_ER__UART8_DCE_RTS 0x1b0b0 + MX6UL_PAD_ENET2_TX_CLK__UART8_DCE_CTS 0x1b0b0 + /* BT_REG_ON */ + MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10 0x130b0 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059 + MX6UL_PAD_NAND_READY_B__USDHC1_DATA4 0x17059 + MX6UL_PAD_NAND_CE0_B__USDHC1_DATA5 0x17059 + MX6UL_PAD_NAND_CE1_B__USDHC1_DATA6 0x17059 + MX6UL_PAD_NAND_CLE__USDHC1_DATA7 0x17059 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6UL_PAD_LCD_DATA18__USDHC2_CMD 0x1b0b0 + MX6UL_PAD_LCD_DATA19__USDHC2_CLK 0x100b0 + MX6UL_PAD_LCD_DATA20__USDHC2_DATA0 0x1b0b0 + MX6UL_PAD_LCD_DATA21__USDHC2_DATA1 0x1b0b0 + MX6UL_PAD_LCD_DATA22__USDHC2_DATA2 0x1b0b0 + MX6UL_PAD_LCD_DATA23__USDHC2_DATA3 0x1b0b0 + /* WL_REG_ON */ + MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09 0x130b0 + /* WL_IRQ */ + MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08 0x1b0b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6ul-imx6ull-opos6uldev.dtsi b/arch/arm/boot/dts/imx6ul-imx6ull-opos6uldev.dtsi new file mode 100644 index 000000000000..18966350bfd8 --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-imx6ull-opos6uldev.dtsi @@ -0,0 +1,338 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +// +// Copyright 2019 Armadeus Systems <support@armadeus.com> + +/ { + chosen { + stdout-path = &uart1; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm3 0 191000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <7>; + power-supply = <®_5v>; + status = "okay"; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + + user-button { + label = "User button"; + gpios = <&gpio2 11 GPIO_ACTIVE_LOW>; + linux,code = <BTN_MISC>; + wakeup-source; + }; + }; + + leds { + compatible = "gpio-leds"; + + user-led { + label = "User"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_led>; + gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + onewire { + compatible = "w1-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_w1>; + gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; + }; + + panel: panel { + compatible = "armadeus,st0700-adapt"; + power-supply = <®_3v3>; + backlight = <&backlight>; + + port { + panel_in: endpoint { + remote-endpoint = <&lcdif_out>; + }; + }; + }; + + reg_5v: regulator-5v { + compatible = "regulator-fixed"; + regulator-name = "5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_usbotg1_vbus: regulator-usbotg1vbus { + compatible = "regulator-fixed"; + regulator-name = "usbotg1vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1_vbus>; + gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usbotg2_vbus: regulator-usbotg2vbus { + compatible = "regulator-fixed"; + regulator-name = "usbotg2vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg2_vbus>; + gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&adc1 { + vref-supply = <®_3v3>; + status = "okay"; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + xceiver-supply = <®_5v>; + status = "okay"; +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + xceiver-supply = <®_5v>; + status = "okay"; +}; + +&ecspi4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi4>; + cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>, <&gpio4 3 GPIO_ACTIVE_LOW>; + status = "okay"; + + spidev0: spi@0 { + compatible = "spidev"; + reg = <0>; + spi-max-frequency = <5000000>; + }; + + spidev1: spi@1 { + compatible = "spidev"; + reg = <1>; + spi-max-frequency = <5000000>; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + clock-frequency = <400000>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + clock-frequency = <400000>; + status = "okay"; +}; + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcdif>; + status = "okay"; + + port { + lcdif_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; + status = "okay"; +}; + +&snvs_pwrkey { + status = "disabled"; +}; + +&tsc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tsc>; + xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>; + measure-delay-time = <0xffff>; + pre-charge-time = <0xffff>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&usbotg1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1_id>; + vbus-supply = <®_usbotg1_vbus>; + dr_mode = "otg"; + disable-over-current; + status = "okay"; +}; + +&usbotg2 { + vbus-supply = <®_usbotg2_vbus>; + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpios>; + + pinctrl_ecspi4: ecspi4grp { + fsl,pins = < + MX6UL_PAD_NAND_DATA04__ECSPI4_SCLK 0x1b0b0 + MX6UL_PAD_NAND_DATA05__ECSPI4_MOSI 0x1b0b0 + MX6UL_PAD_NAND_DATA06__ECSPI4_MISO 0x1b0b0 + MX6UL_PAD_NAND_DATA01__GPIO4_IO03 0x1b0b0 + MX6UL_PAD_NAND_DATA07__GPIO4_IO09 0x1b0b0 + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x0b0b0 + MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x0b0b0 + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x0b0b0 + MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x0b0b0 + >; + }; + + pinctrl_gpios: gpiosgrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO09__GPIO1_IO09 0x0b0b0 + MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25 0x0b0b0 + MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24 0x0b0b0 + MX6UL_PAD_NAND_RE_B__GPIO4_IO00 0x0b0b0 + MX6UL_PAD_GPIO1_IO08__GPIO1_IO08 0x0b0b0 + MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x0b0b0 + MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x0b0b0 + MX6UL_PAD_NAND_WE_B__GPIO4_IO01 0x0b0b0 + >; + }; + + pinctrl_gpio_keys: gpiokeysgrp { + fsl,pins = < + MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11 0x0b0b0 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0 + MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0 + MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0 + >; + }; + + pinctrl_lcdif: lcdifgrp { + fsl,pins = < + MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x100b1 + MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x100b1 + MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x100b1 + MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x100b1 + MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x100b1 + MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x100b1 + MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x100b1 + MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x100b1 + MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x100b1 + MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x100b1 + MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x100b1 + MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x100b1 + MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x100b1 + MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x100b1 + MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x100b1 + MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x100b1 + MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x100b1 + MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x100b1 + MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x100b1 + MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x100b1 + MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x100b1 + MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x100b1 + >; + }; + + pinctrl_led: ledgrp { + fsl,pins = < + MX6UL_PAD_LCD_RESET__GPIO3_IO04 0x0b0b0 + >; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6UL_PAD_NAND_ALE__PWM3_OUT 0x1b0b0 + >; + }; + + pinctrl_tsc: tscgrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0xb0 + MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0xb0 + MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0xb0 + MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0xb0 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1 + MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x1b0b1 + MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_usbotg1_id: usbotg1idgrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID 0x1b0b0 + >; + }; + + pinctrl_usbotg1_vbus: usbotg1vbusgrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO05__GPIO1_IO05 0x1b0b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6310-s-43.dts b/arch/arm/boot/dts/imx6ul-kontron-n6310-s-43.dts new file mode 100644 index 000000000000..5bad29683cc3 --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-kontron-n6310-s-43.dts @@ -0,0 +1,102 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2017 exceet electronics GmbH + * Copyright (C) 2018 Kontron Electronics GmbH + * Copyright (c) 2019 Krzysztof Kozlowski <krzk@kernel.org> + */ + +#include "imx6ul-kontron-n6310-s.dts" + +/ { + model = "Kontron N6310 S 43"; + compatible = "kontron,imx6ul-n6310-s-43", "kontron,imx6ul-n6310-s", + "kontron,imx6ul-n6310-som", "fsl,imx6ul"; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm7 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + status = "okay"; + }; +}; + +&i2c4 { + touchscreen@5d { + compatible = "goodix,gt928"; + reg = <0x5d>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_cap_touch>; + interrupt-parent = <&gpio5>; + interrupts = <6 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio5 8 GPIO_ACTIVE_HIGH>; + irq-gpios = <&gpio5 6 GPIO_ACTIVE_HIGH>; + }; +}; + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcdif_dat &pinctrl_lcdif_ctrl>; + /* Leave status disabled because of missing display panel node */ +}; + +&pwm7 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm7>; + status = "okay"; +}; + +&iomuxc { + pinctrl_cap_touch: captouchgrp { + fsl,pins = < + MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x1b0b0 /* Touch Interrupt */ + MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x1b0b0 /* Touch Reset */ + MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08 0x1b0b0 /* Touch Wake */ + >; + }; + + pinctrl_lcdif_ctrl: lcdifctrlgrp { + fsl,pins = < + MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x79 + MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x79 + MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x79 + MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x79 + MX6UL_PAD_LCD_RESET__LCDIF_RESET 0x79 + >; + }; + + pinctrl_lcdif_dat: lcdifdatgrp { + fsl,pins = < + MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x79 + MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x79 + MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x79 + MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x79 + MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x79 + MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x79 + MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x79 + MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x79 + MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x79 + MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x79 + MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x79 + MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x79 + MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x79 + MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x79 + MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x79 + MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x79 + MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x79 + MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x79 + MX6UL_PAD_LCD_DATA18__LCDIF_DATA18 0x79 + MX6UL_PAD_LCD_DATA19__LCDIF_DATA19 0x79 + MX6UL_PAD_LCD_DATA20__LCDIF_DATA20 0x79 + MX6UL_PAD_LCD_DATA21__LCDIF_DATA21 0x79 + MX6UL_PAD_LCD_DATA22__LCDIF_DATA22 0x79 + MX6UL_PAD_LCD_DATA23__LCDIF_DATA23 0x79 + >; + }; + + pinctrl_pwm7: pwm7grp { + fsl,pins = < + MX6UL_PAD_CSI_VSYNC__PWM7_OUT 0x110b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6310-s.dts b/arch/arm/boot/dts/imx6ul-kontron-n6310-s.dts new file mode 100644 index 000000000000..5a3e06d6219b --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-kontron-n6310-s.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2017 exceet electronics GmbH + * Copyright (C) 2018 Kontron Electronics GmbH + * Copyright (c) 2019 Krzysztof Kozlowski <krzk@kernel.org> + */ + +/dts-v1/; + +#include "imx6ul-kontron-n6310-som.dtsi" +#include "imx6ul-kontron-n6x1x-s.dtsi" + +/ { + model = "Kontron N6310 S"; + compatible = "kontron,imx6ul-n6310-s", "kontron,imx6ul-n6310-som", + "fsl,imx6ul"; +}; diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi b/arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi new file mode 100644 index 000000000000..47d3ce5d255f --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi @@ -0,0 +1,41 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2017 exceet electronics GmbH + * Copyright (C) 2018 Kontron Electronics GmbH + * Copyright (c) 2019 Krzysztof Kozlowski <krzk@kernel.org> + */ + +#include "imx6ul.dtsi" +#include "imx6ul-kontron-n6x1x-som-common.dtsi" + +/ { + model = "Kontron N6310 SOM"; + compatible = "kontron,imx6ul-n6310-som", "fsl,imx6ul"; + + memory@80000000 { + reg = <0x80000000 0x10000000>; + device_type = "memory"; + }; +}; + +&qspi { + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spi-nand"; + spi-max-frequency = <108000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + reg = <0>; + + partition@0 { + label = "ubi1"; + reg = <0x00000000 0x08000000>; + }; + + partition@8000000 { + label = "ubi2"; + reg = <0x08000000 0x08000000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6311-s.dts b/arch/arm/boot/dts/imx6ul-kontron-n6311-s.dts new file mode 100644 index 000000000000..239a1af3aeaa --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-kontron-n6311-s.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2017 exceet electronics GmbH + * Copyright (C) 2018 Kontron Electronics GmbH + */ + +/dts-v1/; + +#include "imx6ul-kontron-n6311-som.dtsi" +#include "imx6ul-kontron-n6x1x-s.dtsi" + +/ { + model = "Kontron N6311 S"; + compatible = "kontron,imx6ul-n6311-s", "kontron,imx6ul-n6311-som", + "fsl,imx6ul"; +}; diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6311-som.dtsi b/arch/arm/boot/dts/imx6ul-kontron-n6311-som.dtsi new file mode 100644 index 000000000000..a095a7654ac6 --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-kontron-n6311-som.dtsi @@ -0,0 +1,40 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2017 exceet electronics GmbH + * Copyright (C) 2018 Kontron Electronics GmbH + */ + +#include "imx6ul.dtsi" +#include "imx6ul-kontron-n6x1x-som-common.dtsi" + +/ { + model = "Kontron N6311 SOM"; + compatible = "kontron,imx6ul-n6311-som", "fsl,imx6ul"; + + memory@80000000 { + reg = <0x80000000 0x20000000>; + device_type = "memory"; + }; +}; + +&qspi { + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spi-nand"; + spi-max-frequency = <104000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + reg = <0>; + + partition@0 { + label = "ubi1"; + reg = <0x00000000 0x08000000>; + }; + + partition@8000000 { + label = "ubi2"; + reg = <0x08000000 0x18000000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi new file mode 100644 index 000000000000..f05e91841202 --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi @@ -0,0 +1,418 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2017 exceet electronics GmbH + * Copyright (C) 2018 Kontron Electronics GmbH + * Copyright (c) 2019 Krzysztof Kozlowski <krzk@kernel.org> + */ + +#include <dt-bindings/gpio/gpio.h> + +/ { + gpio-leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + + led1 { + label = "debug-led1"; + gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; + default-state = "off"; + linux,default-trigger = "heartbeat"; + }; + + led2 { + label = "debug-led2"; + gpios = <&gpio5 3 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led3 { + label = "debug-led3"; + gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + }; + + pwm-beeper { + compatible = "pwm-beeper"; + pwms = <&pwm8 0 5000>; + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_5v: regulator-5v { + compatible = "regulator-fixed"; + regulator-name = "5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_usb_otg1_vbus: regulator-usb-otg1-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_vref_adc: regulator-vref-adc { + compatible = "regulator-fixed"; + regulator-name = "vref-adc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&adc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc1>; + num-channels = <3>; + vref-supply = <®_vref_adc>; + status = "okay"; +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + status = "okay"; +}; + +&ecspi1 { + cs-gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + status = "okay"; + + eeprom@0 { + compatible = "anvo,anv32e61w", "atmel,at25"; + reg = <0>; + spi-max-frequency = <20000000>; + spi-cpha; + spi-cpol; + pagesize = <1>; + size = <8192>; + address-width = <16>; + }; +}; + +&fec1 { + pinctrl-0 = <&pinctrl_enet1>; + /delete-node/ mdio; +}; + +&fec2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet2 &pinctrl_enet2_mdio>; + phy-mode = "rmii"; + phy-handle = <ðphy2>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy1: ethernet-phy@1 { + reg = <1>; + micrel,led-mode = <0>; + clocks = <&clks IMX6UL_CLK_ENET_REF>; + clock-names = "rmii-ref"; + }; + + ethphy2: ethernet-phy@2 { + reg = <2>; + micrel,led-mode = <0>; + clocks = <&clks IMX6UL_CLK_ENET2_REF>; + clock-names = "rmii-ref"; + }; + }; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; +}; + +&i2c4 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + status = "okay"; + + rtc@32 { + compatible = "epson,rx8900"; + reg = <0x32>; + }; +}; + +&pwm8 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm8>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + linux,rs485-enabled-at-boot-time; + rs485-rx-during-tx; + rs485-rts-active-low; + uart-has-rtscts; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + fsl,uart-has-rtscts; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&usbotg1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1>; + dr_mode = "otg"; + srp-disable; + hnp-disable; + adp-disable; + over-current-active-low; + vbus-supply = <®_usb_otg1_vbus>; + status = "okay"; +}; + +&usbotg2 { + dr_mode = "host"; + disable-over-current; + vbus-supply = <®_5v>; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; + keep-power-in-suspend; + wakeup-source; + vmmc-supply = <®_3v3>; + voltage-ranges = <3300 3300>; + no-1-8-v; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>; + non-removable; + keep-power-in-suspend; + wakeup-source; + vmmc-supply = <®_3v3>; + voltage-ranges = <3300 3300>; + no-1-8-v; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl-0 = <&pinctrl_reset_out &pinctrl_gpio>; + + pinctrl_adc1: adc1grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0xb0 + MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0xb0 + MX6UL_PAD_GPIO1_IO08__GPIO1_IO08 0xb0 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6UL_PAD_CSI_DATA07__ECSPI1_MISO 0x100b1 + MX6UL_PAD_CSI_DATA06__ECSPI1_MOSI 0x100b1 + MX6UL_PAD_CSI_DATA04__ECSPI1_SCLK 0x100b1 + MX6UL_PAD_CSI_DATA05__GPIO4_IO26 0x100b1 /* ECSPI1-CS1 */ + >; + }; + + pinctrl_enet2: enet2grp { + fsl,pins = < + MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x1b0b0 + MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x1b0b0 + MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0 + MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0 + MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b0b0 + MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b0b0 + MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b0b0 + MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4001b009 + >; + }; + + pinctrl_enet2_mdio: enet2mdiogrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO07__ENET2_MDC 0x1b0b0 + MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x1b0b0 + >; + }; + + pinctrl_flexcan2: flexcan2grp{ + fsl,pins = < + MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x1b020 + MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x1b020 + >; + }; + + pinctrl_gpio: gpiogrp { + fsl,pins = < + MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x1b0b0 /* DOUT1 */ + MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x1b0b0 /* DIN1 */ + MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x1b0b0 /* DOUT2 */ + MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x1b0b0 /* DIN2 */ + >; + }; + + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30 0x1b0b0 /* LED H14 */ + MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x1b0b0 /* LED H15 */ + MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x1b0b0 /* LED H16 */ + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6UL_PAD_CSI_PIXCLK__I2C1_SCL 0x4001b8b0 + MX6UL_PAD_CSI_MCLK__I2C1_SDA 0x4001b8b0 + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX6UL_PAD_UART2_TX_DATA__I2C4_SCL 0x4001f8b0 + MX6UL_PAD_UART2_RX_DATA__I2C4_SDA 0x4001f8b0 + >; + }; + + pinctrl_pwm8: pwm8grp { + fsl,pins = < + MX6UL_PAD_CSI_HSYNC__PWM8_OUT 0x110b0 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1 + MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6UL_PAD_NAND_DATA04__UART2_DCE_TX 0x1b0b1 + MX6UL_PAD_NAND_DATA05__UART2_DCE_RX 0x1b0b1 + MX6UL_PAD_NAND_DATA06__UART2_DCE_CTS 0x1b0b1 + /* + * mux unused RTS to make sure it doesn't cause + * any interrupts when it is undefined + */ + MX6UL_PAD_NAND_DATA07__UART2_DCE_RTS 0x1b0b1 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX 0x1b0b1 + MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX 0x1b0b1 + MX6UL_PAD_UART3_CTS_B__UART3_DCE_CTS 0x1b0b1 + MX6UL_PAD_UART3_RTS_B__UART3_DCE_RTS 0x1b0b1 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6UL_PAD_UART4_TX_DATA__UART4_DCE_TX 0x1b0b1 + MX6UL_PAD_UART4_RX_DATA__UART4_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_usbotg1: usbotg1 { + fsl,pins = < + MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0x1b0b0 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059 + MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x100b1 /* SD1_CD */ + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x10059 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x17059 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x100b9 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x170b9 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x170b9 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x170b9 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x170b9 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x170b9 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x100f9 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x170f9 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x170f9 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x170f9 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x170f9 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x170f9 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO09__WDOG1_WDOG_ANY 0x30b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi new file mode 100644 index 000000000000..a17af4d9bfdf --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi @@ -0,0 +1,109 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2017 exceet electronics GmbH + * Copyright (C) 2018 Kontron Electronics GmbH + * Copyright (c) 2019 Krzysztof Kozlowski <krzk@kernel.org> + */ + +#include <dt-bindings/gpio/gpio.h> + +/ { + chosen { + stdout-path = &uart4; + }; +}; + +&ecspi2 { + cs-gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + status = "okay"; + + spi-flash@0 { + compatible = "mxicy,mx25v8035f", "jedec,spi-nor"; + spi-max-frequency = <50000000>; + reg = <0>; + }; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1 &pinctrl_enet1_mdio>; + phy-mode = "rmii"; + phy-handle = <ðphy1>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy1: ethernet-phy@1 { + reg = <1>; + micrel,led-mode = <0>; + clocks = <&clks IMX6UL_CLK_ENET_REF>; + clock-names = "rmii-ref"; + }; + }; +}; + +&fec2 { + phy-mode = "rmii"; + status = "disabled"; +}; + +&qspi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qspi>; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reset_out>; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX6UL_PAD_CSI_DATA03__ECSPI2_MISO 0x100b1 + MX6UL_PAD_CSI_DATA02__ECSPI2_MOSI 0x100b1 + MX6UL_PAD_CSI_DATA00__ECSPI2_SCLK 0x100b1 + MX6UL_PAD_CSI_DATA01__GPIO4_IO22 0x100b1 + >; + }; + + pinctrl_enet1: enet1grp { + fsl,pins = < + MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0 + MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b009 + >; + }; + + pinctrl_enet1_mdio: enet1mdiogrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x1b0b0 + MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x1b0b0 + >; + }; + + pinctrl_qspi: qspigrp { + fsl,pins = < + MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK 0x70a1 + MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00 0x70a1 + MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01 0x70a1 + MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02 0x70a1 + MX6UL_PAD_NAND_CLE__QSPI_A_DATA03 0x70a1 + MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B 0x70a1 + >; + }; + + pinctrl_reset_out: rstoutgrp { + fsl,pins = < + MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x1b0b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6ul-opos6ul.dtsi b/arch/arm/boot/dts/imx6ul-opos6ul.dtsi index cf7faf4b9c47..6ce84f92b027 100644 --- a/arch/arm/boot/dts/imx6ul-opos6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul-opos6ul.dtsi @@ -1,193 +1,6 @@ -/* - * Copyright 2017 Armadeus Systems <support@armadeus.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: GPL-2.0 OR MIT +// +// Copyright 2017 Armadeus Systems <support@armadeus.com> #include "imx6ul.dtsi" - -/ { - memory@80000000 { - device_type = "memory"; - reg = <0x80000000 0>; /* will be filled by U-Boot */ - }; - - reg_3v3: regulator-3v3 { - compatible = "regulator-fixed"; - regulator-name = "3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - usdhc3_pwrseq: usdhc3-pwrseq { - compatible = "mmc-pwrseq-simple"; - reset-gpios = <&gpio2 9 GPIO_ACTIVE_LOW>; - }; -}; - -&fec1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet1>; - phy-mode = "rmii"; - phy-reset-duration = <1>; - phy-reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>; - phy-handle = <ðphy1>; - phy-supply = <®_3v3>; - status = "okay"; - - mdio: mdio { - #address-cells = <1>; - #size-cells = <0>; - - ethphy1: ethernet-phy@1 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <1>; - interrupt-parent = <&gpio4>; - interrupts = <16 IRQ_TYPE_LEVEL_LOW>; - status = "okay"; - }; - }; -}; - -/* Bluetooth */ -&uart8 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart8>; - uart-has-rtscts; - status = "okay"; -}; - -/* eMMC */ -&usdhc1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc1>; - bus-width = <8>; - no-1-8-v; - non-removable; - status = "okay"; -}; - -/* WiFi */ -&usdhc2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc2>; - bus-width = <4>; - no-1-8-v; - non-removable; - mmc-pwrseq = <&usdhc3_pwrseq>; - status = "okay"; - - #address-cells = <1>; - #size-cells = <0>; - - brcmf: wifi@1 { - compatible = "brcm,bcm4329-fmac"; - reg = <1>; - interrupt-parent = <&gpio2>; - interrupts = <8 IRQ_TYPE_LEVEL_LOW>; - interrupt-names = "host-wake"; - }; -}; - -&iomuxc { - pinctrl_enet1: enet1grp { - fsl,pins = < - MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x1b0b0 - MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x1b0b0 - MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x130b0 - MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x130b0 - MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x130b0 - MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x130b0 - MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0 - MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0 - MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0 - /* INT# */ - MX6UL_PAD_NAND_DQS__GPIO4_IO16 0x1b0b0 - /* RST# */ - MX6UL_PAD_NAND_DATA00__GPIO4_IO02 0x130b0 - MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b031 - >; - }; - - pinctrl_uart8: uart8grp { - fsl,pins = < - MX6UL_PAD_ENET2_TX_EN__UART8_DCE_RX 0x1b0b0 - MX6UL_PAD_ENET2_TX_DATA1__UART8_DCE_TX 0x1b0b0 - MX6UL_PAD_ENET2_RX_ER__UART8_DCE_RTS 0x1b0b0 - MX6UL_PAD_ENET2_TX_CLK__UART8_DCE_CTS 0x1b0b0 - /* BT_REG_ON */ - MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10 0x130b0 - >; - }; - - pinctrl_usdhc1: usdhc1grp { - fsl,pins = < - MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059 - MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059 - MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059 - MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059 - MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059 - MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059 - MX6UL_PAD_NAND_READY_B__USDHC1_DATA4 0x17059 - MX6UL_PAD_NAND_CE0_B__USDHC1_DATA5 0x17059 - MX6UL_PAD_NAND_CE1_B__USDHC1_DATA6 0x17059 - MX6UL_PAD_NAND_CLE__USDHC1_DATA7 0x17059 - >; - }; - - pinctrl_usdhc2: usdhc2grp { - fsl,pins = < - MX6UL_PAD_LCD_DATA18__USDHC2_CMD 0x1b0b0 - MX6UL_PAD_LCD_DATA19__USDHC2_CLK 0x100b0 - MX6UL_PAD_LCD_DATA20__USDHC2_DATA0 0x1b0b0 - MX6UL_PAD_LCD_DATA21__USDHC2_DATA1 0x1b0b0 - MX6UL_PAD_LCD_DATA22__USDHC2_DATA2 0x1b0b0 - MX6UL_PAD_LCD_DATA23__USDHC2_DATA3 0x1b0b0 - /* WL_REG_ON */ - MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09 0x130b0 - /* WL_IRQ */ - MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08 0x1b0b0 - >; - }; -}; +#include "imx6ul-imx6ull-opos6ul.dtsi" diff --git a/arch/arm/boot/dts/imx6ul-opos6uldev.dts b/arch/arm/boot/dts/imx6ul-opos6uldev.dts index 0e59ee57fd55..375b98d7205a 100644 --- a/arch/arm/boot/dts/imx6ul-opos6uldev.dts +++ b/arch/arm/boot/dts/imx6ul-opos6uldev.dts @@ -1,298 +1,21 @@ -/* - * Copyright 2017 Armadeus Systems <support@armadeus.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: GPL-2.0 OR MIT +// +// Copyright 2017 Armadeus Systems <support@armadeus.com> /dts-v1/; #include "imx6ul-opos6ul.dtsi" +#include "imx6ul-imx6ull-opos6uldev.dtsi" / { - model = "Armadeus Systems OPOS6UL SoM on OPOS6ULDev board"; - compatible = "armadeus,opos6uldev", "armadeus,opos6ul", "fsl,imx6ul"; - - chosen { - stdout-path = &uart1; - }; - - backlight { - compatible = "pwm-backlight"; - pwms = <&pwm3 0 191000>; - brightness-levels = <0 4 8 16 32 64 128 255>; - default-brightness-level = <7>; - power-supply = <®_5v>; - status = "okay"; - }; - - gpio-keys { - compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpio_keys>; - - user-button { - label = "User button"; - gpios = <&gpio2 11 GPIO_ACTIVE_LOW>; - linux,code = <BTN_MISC>; - wakeup-source; - }; - }; - - leds { - compatible = "gpio-leds"; - - user-led { - label = "User"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_led>; - gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - }; - }; - - onewire { - compatible = "w1-gpio"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_w1>; - gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; - }; - - reg_5v: regulator-5v { - compatible = "regulator-fixed"; - regulator-name = "5V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - - reg_usbotg1_vbus: regulator-usbotg1vbus { - compatible = "regulator-fixed"; - regulator-name = "usbotg1vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbotg1_vbus>; - gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - reg_usbotg2_vbus: regulator-usbotg2vbus { - compatible = "regulator-fixed"; - regulator-name = "usbotg2vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbotg2_vbus>; - gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; -}; - -&adc1 { - vref-supply = <®_3v3>; - status = "okay"; -}; - -&can1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_flexcan1>; - xceiver-supply = <®_5v>; - status = "okay"; -}; - -&can2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_flexcan2>; - xceiver-supply = <®_5v>; - status = "okay"; -}; - -&ecspi4 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ecspi4>; - cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>, <&gpio4 3 GPIO_ACTIVE_LOW>; - status = "okay"; - - spidev0: spi@0 { - compatible = "spidev"; - reg = <0>; - spi-max-frequency = <5000000>; - }; - - spidev1: spi@1 { - compatible = "spidev"; - reg = <1>; - spi-max-frequency = <5000000>; - }; -}; - -&i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c1>; - clock_frequency = <400000>; - status = "okay"; -}; - -&i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c2>; - clock_frequency = <400000>; - status = "okay"; -}; - -&lcdif { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_lcdif>; - display = <&display0>; - lcd-supply = <®_3v3>; - status = "okay"; - - display0: display0 { - bits-per-pixel = <32>; - bus-width = <18>; - - display-timings { - timing0: timing0 { - clock-frequency = <33000033>; - hactive = <800>; - vactive = <480>; - hback-porch = <96>; - hfront-porch = <96>; - vback-porch = <20>; - vfront-porch = <21>; - hsync-len = <64>; - vsync-len = <4>; - de-active = <1>; - pixelclk-active = <0>; - }; - }; - }; -}; - -&pwm3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm3>; - status = "okay"; -}; - -&snvs_pwrkey { - status = "disabled"; -}; - -&tsc { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_tsc>; - xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>; - measure-delay-time = <0xffff>; - pre-charge-time = <0xffff>; - status = "okay"; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1>; - status = "okay"; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; - status = "okay"; -}; - -&usbotg1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbotg1_id>; - vbus-supply = <®_usbotg1_vbus>; - dr_mode = "otg"; - disable-over-current; - status = "okay"; -}; - -&usbotg2 { - vbus-supply = <®_usbotg2_vbus>; - dr_mode = "host"; - disable-over-current; - status = "okay"; + model = "Armadeus Systems OPOS6UL SoM (i.MX6UL) on OPOS6ULDev board"; + compatible = "armadeus,imx6ul-opos6uldev", "armadeus,imx6ul-opos6ul", "fsl,imx6ul"; }; &iomuxc { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpios>; + pinctrl-0 = <&pinctrl_gpios>, <&pinctrl_tamper_gpios>; - pinctrl_ecspi4: ecspi4grp { + pinctrl_tamper_gpios: tampergpiosgrp { fsl,pins = < - MX6UL_PAD_NAND_DATA04__ECSPI4_SCLK 0x1b0b0 - MX6UL_PAD_NAND_DATA05__ECSPI4_MOSI 0x1b0b0 - MX6UL_PAD_NAND_DATA06__ECSPI4_MISO 0x1b0b0 - MX6UL_PAD_NAND_DATA01__GPIO4_IO03 0x1b0b0 - MX6UL_PAD_NAND_DATA07__GPIO4_IO09 0x1b0b0 - >; - }; - - pinctrl_flexcan1: flexcan1grp { - fsl,pins = < - MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x0b0b0 - MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x0b0b0 - >; - }; - - pinctrl_flexcan2: flexcan2grp { - fsl,pins = < - MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x0b0b0 - MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x0b0b0 - >; - }; - - pinctrl_gpios: gpiosgrp { - fsl,pins = < - MX6UL_PAD_GPIO1_IO09__GPIO1_IO09 0x0b0b0 - MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25 0x0b0b0 - MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24 0x0b0b0 - MX6UL_PAD_NAND_RE_B__GPIO4_IO00 0x0b0b0 - MX6UL_PAD_GPIO1_IO08__GPIO1_IO08 0x0b0b0 - MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x0b0b0 - MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x0b0b0 - MX6UL_PAD_NAND_WE_B__GPIO4_IO01 0x0b0b0 MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x0b0b0 MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x0b0b0 MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x0b0b0 @@ -304,100 +27,6 @@ >; }; - pinctrl_gpio_keys: gpiokeysgrp { - fsl,pins = < - MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11 0x0b0b0 - >; - }; - - pinctrl_i2c1: i2c1grp { - fsl,pins = < - MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0 - MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0 - >; - }; - - pinctrl_i2c2: i2c2grp { - fsl,pins = < - MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0 - MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0 - >; - }; - - pinctrl_lcdif: lcdifgrp { - fsl,pins = < - MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x100b1 - MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x100b1 - MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x100b1 - MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x100b1 - MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x100b1 - MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x100b1 - MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x100b1 - MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x100b1 - MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x100b1 - MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x100b1 - MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x100b1 - MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x100b1 - MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x100b1 - MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x100b1 - MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x100b1 - MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x100b1 - MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x100b1 - MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x100b1 - MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x100b1 - MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x100b1 - MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x100b1 - MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x100b1 - >; - }; - - pinctrl_led: ledgrp { - fsl,pins = < - MX6UL_PAD_LCD_RESET__GPIO3_IO04 0x0b0b0 - >; - }; - - pinctrl_pwm3: pwm3grp { - fsl,pins = < - MX6UL_PAD_NAND_ALE__PWM3_OUT 0x1b0b0 - >; - }; - - pinctrl_tsc: tscgrp { - fsl,pins = < - MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0xb0 - MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0xb0 - MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0xb0 - MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0xb0 - >; - }; - - pinctrl_uart1: uart1grp { - fsl,pins = < - MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1 - MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1 - >; - }; - - pinctrl_uart2: uart2grp { - fsl,pins = < - MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x1b0b1 - MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x1b0b1 - >; - }; - - pinctrl_usbotg1_id: usbotg1idgrp { - fsl,pins = < - MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID 0x1b0b0 - >; - }; - - pinctrl_usbotg1_vbus: usbotg1vbusgrp { - fsl,pins = < - MX6UL_PAD_GPIO1_IO05__GPIO1_IO05 0x1b0b0 - >; - }; - pinctrl_usbotg2_vbus: usbotg2vbusgrp { fsl,pins = < MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x1b0b0 diff --git a/arch/arm/boot/dts/imx6ul-phytec-pcl063.dtsi b/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi index fc2997449b49..88f631c8fabb 100644 --- a/arch/arm/boot/dts/imx6ul-phytec-pcl063.dtsi +++ b/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi @@ -7,10 +7,9 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/pwm/pwm.h> -#include "imx6ul.dtsi" / { - model = "Phytec phyCORE i.MX6 UltraLite"; + model = "PHYTEC phyCORE-i.MX6 UltraLite"; compatible = "phytec,imx6ul-pcl063", "fsl,imx6ul"; chosen { @@ -21,7 +20,7 @@ * Set the minimum memory size here and * let the bootloader set the real size. */ - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x8000000>; }; @@ -31,8 +30,7 @@ pinctrl-0 = <&pinctrl_gpioleds_som>; compatible = "gpio-leds"; - led_green { - label = "phycore:green"; + phycore-green { gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; @@ -43,20 +41,21 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet1>; phy-mode = "rmii"; - phy-handle = <ðphy0>; - status = "okay"; + phy-handle = <ðphy1>; + status = "disabled"; mdio: mdio { #address-cells = <1>; #size-cells = <0>; - ethphy0: ethernet-phy@1 { + ethphy1: ethernet-phy@1 { reg = <1>; interrupt-parent = <&gpio1>; interrupts = <2 IRQ_TYPE_LEVEL_LOW>; micrel,led-mode = <1>; clocks = <&clks IMX6UL_CLK_ENET_REF>; clock-names = "rmii-ref"; + status = "disabled"; }; }; }; @@ -65,12 +64,12 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpmi_nand>; nand-on-flash-bbt; - status = "okay"; + status = "disabled"; }; &i2c1 { pinctrl-names = "default"; - pinctrl-0 =<&pinctrl_i2c1>; + pinctrl-0 = <&pinctrl_i2c1>; clock-frequency = <100000>; status = "okay"; @@ -90,19 +89,28 @@ status = "okay"; }; +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + bus-width = <8>; + no-1-8-v; + non-removable; + status = "disabled"; +}; + &iomuxc { pinctrl_enet1: enet1grp { fsl,pins = < - MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x1b0b0 - MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x1b0b0 + MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x10010 + MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x10010 MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0 MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x1b0b0 MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0 MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0 - MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0 - MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0 - MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0 - MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b031 + MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b010 + MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b010 + MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b010 + MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b010 MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0x17059 >; }; @@ -145,4 +153,19 @@ >; }; + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x170f9 + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x100f9 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x170f9 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x170f9 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x170f9 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x170f9 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x170f9 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x170f9 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x170f9 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x170f9 + >; + }; + }; diff --git a/arch/arm/boot/dts/imx6ul-phytec-phyboard-segin-full.dts b/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-nand.dts index b6a1407a9d44..699dfcbf9a60 100644 --- a/arch/arm/boot/dts/imx6ul-phytec-phyboard-segin-full.dts +++ b/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-nand.dts @@ -5,13 +5,15 @@ */ /dts-v1/; -#include "imx6ul-phytec-pcl063.dtsi" -#include "imx6ul-phytec-phyboard-segin.dtsi" -#include "imx6ul-phytec-peb-eval-01.dtsi" +#include "imx6ul.dtsi" +#include "imx6ul-phytec-phycore-som.dtsi" +#include "imx6ul-phytec-segin.dtsi" +#include "imx6ul-phytec-segin-peb-eval-01.dtsi" / { - model = "Phytec phyBOARD-Segin i.MX6 UltraLite Full Featured"; - compatible = "phytec,imx6ul-pbacd10", "phytec,imx6ul-pcl063", "fsl,imx6ul"; + model = "PHYTEC phyBOARD-Segin i.MX6 UltraLite Full Featured with NAND"; + compatible = "phytec,imx6ul-pbacd10-nand", "phytec,imx6ul-pbacd10", + "phytec,imx6ul-pcl063", "fsl,imx6ul"; }; &adc1 { @@ -27,9 +29,18 @@ }; &ecspi3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ecspi3>; - cs-gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +ðphy1 { + status = "okay"; +}; + +ðphy2 { + status = "okay"; +}; + +&fec1 { status = "okay"; }; @@ -37,6 +48,10 @@ status = "okay"; }; +&gpmi { + status = "okay"; +}; + &i2c_rtc { status = "okay"; }; @@ -76,14 +91,3 @@ &usdhc1 { status = "okay"; }; - -&iomuxc { - pinctrl_ecspi3: ecspi3grp { - fsl,pins = < - MX6UL_PAD_UART2_RTS_B__ECSPI3_MISO 0x10b0 - MX6UL_PAD_UART2_CTS_B__ECSPI3_MOSI 0x10b0 - MX6UL_PAD_UART2_RX_DATA__ECSPI3_SCLK 0x10b0 - MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20 0x10b0 - >; - }; -}; diff --git a/arch/arm/boot/dts/imx6ul-phytec-peb-eval-01.dtsi b/arch/arm/boot/dts/imx6ul-phytec-segin-peb-eval-01.dtsi index e2f38f39a6ad..2f3fd32a1167 100644 --- a/arch/arm/boot/dts/imx6ul-phytec-peb-eval-01.dtsi +++ b/arch/arm/boot/dts/imx6ul-phytec-segin-peb-eval-01.dtsi @@ -21,20 +21,22 @@ }; }; - user_leds: leds { + user_leds: user-leds { compatible = "gpio-leds"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_user_leds>; status = "disabled"; - led_yellow { - gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-on"; + user-led1 { + gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "gpio"; + default-state = "on"; }; - led_red { - gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-on"; + user-led2 { + gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "gpio"; + default-state = "on"; }; }; }; diff --git a/arch/arm/boot/dts/imx6ul-phytec-phyboard-segin.dtsi b/arch/arm/boot/dts/imx6ul-phytec-segin.dtsi index 7bf439a77d2c..8d5f8dc6ad58 100644 --- a/arch/arm/boot/dts/imx6ul-phytec-phyboard-segin.dtsi +++ b/arch/arm/boot/dts/imx6ul-phytec-segin.dtsi @@ -5,7 +5,7 @@ */ / { - model = "Phytec phyBOARD-Segin i.MX6 UltraLite"; + model = "PHYTEC phyBOARD-Segin i.MX6 UltraLite"; compatible = "phytec,imx6ul-pbacd-10", "phytec,imx6ul-pcl063", "fsl,imx6ul"; aliases { @@ -103,11 +103,18 @@ assigned-clock-rates = <786432000>; }; +&ecspi3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi3>; + cs-gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>; + status = "disabled"; +}; + &fec2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet2>; phy-mode = "rmii"; - phy-handle = <ðphy1>; + phy-handle = <ðphy2>; status = "disabled"; }; @@ -160,11 +167,12 @@ }; &mdio { - ethphy1: ethernet-phy@2 { + ethphy2: ethernet-phy@2 { reg = <2>; micrel,led-mode = <1>; clocks = <&clks IMX6UL_CLK_ENET2_REF>; clock-names = "rmii-ref"; + status = "disabled"; }; }; @@ -224,16 +232,25 @@ >; }; + pinctrl_ecspi3: ecspi3grp { + fsl,pins = < + MX6UL_PAD_UART2_RTS_B__ECSPI3_MISO 0x10b0 + MX6UL_PAD_UART2_CTS_B__ECSPI3_MOSI 0x10b0 + MX6UL_PAD_UART2_RX_DATA__ECSPI3_SCLK 0x10b0 + MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20 0x10b0 + >; + }; + pinctrl_enet2: enet2grp { fsl,pins = < MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x1b0b0 MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x1b0b0 MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0 MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0 - MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b0b0 - MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b0b0 - MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b0b0 - MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4001b031 + MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b010 + MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b010 + MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b010 + MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4001b010 >; }; diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi index 81d4b4925127..d9fdca12819b 100644 --- a/arch/arm/boot/dts/imx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul.dtsi @@ -93,18 +93,6 @@ }; }; - intc: interrupt-controller@a01000 { - compatible = "arm,gic-400", "arm,cortex-a7-gic"; - interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>; - #interrupt-cells = <3>; - interrupt-controller; - interrupt-parent = <&intc>; - reg = <0x00a01000 0x1000>, - <0x00a02000 0x2000>, - <0x00a04000 0x2000>, - <0x00a06000 0x2000>; - }; - timer { compatible = "arm,armv7-timer"; interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, @@ -171,6 +159,18 @@ reg = <0x00900000 0x20000>; }; + intc: interrupt-controller@a01000 { + compatible = "arm,gic-400", "arm,cortex-a7-gic"; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>; + #interrupt-cells = <3>; + interrupt-controller; + interrupt-parent = <&intc>; + reg = <0x00a01000 0x1000>, + <0x00a02000 0x2000>, + <0x00a04000 0x2000>, + <0x00a06000 0x2000>; + }; + dma_apbh: dma-apbh@1804000 { compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh"; reg = <0x01804000 0x2000>; @@ -227,6 +227,8 @@ clocks = <&clks IMX6UL_CLK_ECSPI1>, <&clks IMX6UL_CLK_ECSPI1>; clock-names = "ipg", "per"; + dmas = <&sdma 3 7 1>, <&sdma 4 7 2>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -239,6 +241,8 @@ clocks = <&clks IMX6UL_CLK_ECSPI2>, <&clks IMX6UL_CLK_ECSPI2>; clock-names = "ipg", "per"; + dmas = <&sdma 5 7 1>, <&sdma 6 7 2>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -251,6 +255,8 @@ clocks = <&clks IMX6UL_CLK_ECSPI3>, <&clks IMX6UL_CLK_ECSPI3>; clock-names = "ipg", "per"; + dmas = <&sdma 7 7 1>, <&sdma 8 7 2>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -263,6 +269,8 @@ clocks = <&clks IMX6UL_CLK_ECSPI4>, <&clks IMX6UL_CLK_ECSPI4>; clock-names = "ipg", "per"; + dmas = <&sdma 9 7 1>, <&sdma 10 7 2>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -510,8 +518,8 @@ <&clks IMX6UL_CLK_ENET2_REF_125M>; clock-names = "ipg", "ahb", "ptp", "enet_clk_ref", "enet_out"; - fsl,num-tx-queues=<1>; - fsl,num-rx-queues=<1>; + fsl,num-tx-queues = <1>; + fsl,num-rx-queues = <1>; status = "disabled"; }; @@ -550,7 +558,7 @@ anatop: anatop@20c8000 { compatible = "fsl,imx6ul-anatop", "fsl,imx6q-anatop", - "syscon", "simple-bus"; + "syscon", "simple-mfd"; reg = <0x020c8000 0x1000>; interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, @@ -703,6 +711,7 @@ clocks = <&clks IMX6UL_CLK_GPT2_BUS>, <&clks IMX6UL_CLK_GPT2_SERIAL>; clock-names = "ipg", "per"; + status = "disabled"; }; sdma: sdma@20ec000 { @@ -845,8 +854,8 @@ <&clks IMX6UL_CLK_ENET_REF>; clock-names = "ipg", "ahb", "ptp", "enet_clk_ref", "enet_out"; - fsl,num-tx-queues=<1>; - fsl,num-rx-queues=<1>; + fsl,num-tx-queues = <1>; + fsl,num-rx-queues = <1>; status = "disabled"; }; @@ -858,7 +867,7 @@ <&clks IMX6UL_CLK_USDHC1>, <&clks IMX6UL_CLK_USDHC1>; clock-names = "ipg", "ahb", "per"; - fsl,tuning-step= <2>; + fsl,tuning-step = <2>; fsl,tuning-start-tap = <20>; bus-width = <4>; status = "disabled"; @@ -873,7 +882,7 @@ <&clks IMX6UL_CLK_USDHC2>; clock-names = "ipg", "ahb", "per"; bus-width = <4>; - fsl,tuning-step= <2>; + fsl,tuning-step = <2>; fsl,tuning-start-tap = <20>; status = "disabled"; }; @@ -957,6 +966,15 @@ }; }; + csi: csi@21c4000 { + compatible = "fsl,imx6ul-csi", "fsl,imx7-csi"; + reg = <0x021c4000 0x4000>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_CSI>; + clock-names = "mclk"; + status = "disabled"; + }; + lcdif: lcdif@21c8000 { compatible = "fsl,imx6ul-lcdif", "fsl,imx28-lcdif"; reg = <0x021c8000 0x4000>; diff --git a/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi b/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi index b6147c76d159..a78849fd2afa 100644 --- a/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi +++ b/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi @@ -8,6 +8,20 @@ stdout-path = "serial0:115200n8"; }; + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_snvs_gpiokeys>; + + power { + label = "Wake-Up"; + gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; + linux,code = <KEY_WAKEUP>; + debounce-interval = <10>; + wakeup-source; + }; + }; + /* fixed crystal dedicated to mcp2515 */ clk16m: clk16m { compatible = "fixed-clock"; diff --git a/arch/arm/boot/dts/imx6ull-colibri-nonwifi.dtsi b/arch/arm/boot/dts/imx6ull-colibri-nonwifi.dtsi index fb213bec4654..95a11b8bcbdb 100644 --- a/arch/arm/boot/dts/imx6ull-colibri-nonwifi.dtsi +++ b/arch/arm/boot/dts/imx6ull-colibri-nonwifi.dtsi @@ -15,7 +15,7 @@ &iomuxc { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3 - &pinctrl_gpio4 &pinctrl_gpio5 &pinctrl_gpio6>; + &pinctrl_gpio4 &pinctrl_gpio5 &pinctrl_gpio6 &pinctrl_gpio7>; }; &iomuxc_snvs { diff --git a/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi b/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi index 038d8c90f6df..a0545431b3dc 100644 --- a/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi +++ b/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi @@ -26,7 +26,7 @@ &iomuxc { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3 - &pinctrl_gpio4 &pinctrl_gpio5>; + &pinctrl_gpio4 &pinctrl_gpio5 &pinctrl_gpio7>; }; diff --git a/arch/arm/boot/dts/imx6ull-colibri.dtsi b/arch/arm/boot/dts/imx6ull-colibri.dtsi index d56728f03c35..9145c536d71a 100644 --- a/arch/arm/boot/dts/imx6ull-colibri.dtsi +++ b/arch/arm/boot/dts/imx6ull-colibri.dtsi @@ -54,6 +54,18 @@ vref-supply = <®_module_3v3_avdd>; }; +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + status = "disabled"; +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + status = "disabled"; +}; + /* Colibri SPI */ &ecspi1 { cs-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>; @@ -62,8 +74,9 @@ }; &fec2 { - pinctrl-names = "default"; + pinctrl-names = "default", "sleep"; pinctrl-0 = <&pinctrl_enet2>; + pinctrl-1 = <&pinctrl_enet2_sleep>; phy-mode = "rmii"; phy-handle = <ðphy1>; status = "okay"; @@ -198,10 +211,16 @@ assigned-clock-rates = <0>, <198000000>; }; +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; +}; + &iomuxc { pinctrl_can_int: canint-grp { fsl,pins = < - MX6UL_PAD_ENET1_TX_DATA1__GPIO2_IO04 0X14 /* SODIMM 73 */ + MX6UL_PAD_ENET1_TX_DATA1__GPIO2_IO04 0x13010 /* SODIMM 73 */ >; }; @@ -220,17 +239,39 @@ >; }; + pinctrl_enet2_sleep: enet2sleepgrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO06__GPIO1_IO06 0x0 + MX6UL_PAD_GPIO1_IO07__GPIO1_IO07 0x0 + MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08 0x0 + MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09 0x0 + MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10 0x0 + MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15 0x0 + MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4001b031 + MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11 0x0 + MX6UL_PAD_ENET2_TX_DATA1__GPIO2_IO12 0x0 + MX6UL_PAD_ENET2_TX_EN__GPIO2_IO13 0x0 + >; + }; + pinctrl_ecspi1_cs: ecspi1-cs-grp { fsl,pins = < - MX6UL_PAD_LCD_DATA21__GPIO3_IO26 0x000a0 + MX6UL_PAD_LCD_DATA21__GPIO3_IO26 0x70a0 /* SODIMM 86 */ >; }; pinctrl_ecspi1: ecspi1-grp { fsl,pins = < - MX6UL_PAD_LCD_DATA20__ECSPI1_SCLK 0x000a0 - MX6UL_PAD_LCD_DATA22__ECSPI1_MOSI 0x000a0 - MX6UL_PAD_LCD_DATA23__ECSPI1_MISO 0x100a0 + MX6UL_PAD_LCD_DATA20__ECSPI1_SCLK 0x000a0 /* SODIMM 88 */ + MX6UL_PAD_LCD_DATA22__ECSPI1_MOSI 0x000a0 /* SODIMM 92 */ + MX6UL_PAD_LCD_DATA23__ECSPI1_MISO 0x100a0 /* SODIMM 90 */ + >; + }; + + pinctrl_flexcan1: flexcan1-grp { + fsl,pins = < + MX6UL_PAD_ENET1_RX_DATA0__FLEXCAN1_TX 0x1b020 + MX6UL_PAD_ENET1_RX_DATA1__FLEXCAN1_RX 0x1b020 >; }; @@ -243,63 +284,68 @@ pinctrl_gpio_bl_on: gpio-bl-on-grp { fsl,pins = < - MX6UL_PAD_JTAG_TMS__GPIO1_IO11 0x000a0 + MX6UL_PAD_JTAG_TMS__GPIO1_IO11 0x30a0 /* SODIMM 71 */ >; }; pinctrl_gpio1: gpio1-grp { fsl,pins = < - MX6UL_PAD_ENET1_RX_DATA0__GPIO2_IO00 0x74 /* SODIMM 55 */ - MX6UL_PAD_ENET1_RX_DATA1__GPIO2_IO01 0x74 /* SODIMM 63 */ - MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25 0X14 /* SODIMM 77 */ - MX6UL_PAD_JTAG_TCK__GPIO1_IO14 0x14 /* SODIMM 99 */ - MX6UL_PAD_NAND_CE1_B__GPIO4_IO14 0x14 /* SODIMM 133 */ - MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24 0x14 /* SODIMM 135 */ - MX6UL_PAD_UART3_CTS_B__GPIO1_IO26 0x14 /* SODIMM 100 */ - MX6UL_PAD_JTAG_TRST_B__GPIO1_IO15 0x14 /* SODIMM 102 */ - MX6UL_PAD_ENET1_RX_ER__GPIO2_IO07 0x14 /* SODIMM 104 */ - MX6UL_PAD_UART3_RTS_B__GPIO1_IO27 0x14 /* SODIMM 186 */ + MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25 0x10b0 /* SODIMM 77 */ + MX6UL_PAD_JTAG_TCK__GPIO1_IO14 0x70a0 /* SODIMM 99 */ + MX6UL_PAD_NAND_CE1_B__GPIO4_IO14 0x10b0 /* SODIMM 133 */ + MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24 0x10b0 /* SODIMM 135 */ + MX6UL_PAD_UART3_CTS_B__GPIO1_IO26 0x10b0 /* SODIMM 100 */ + MX6UL_PAD_JTAG_TRST_B__GPIO1_IO15 0x70a0 /* SODIMM 102 */ + MX6UL_PAD_ENET1_RX_ER__GPIO2_IO07 0x10b0 /* SODIMM 104 */ + MX6UL_PAD_UART3_RTS_B__GPIO1_IO27 0x10b0 /* SODIMM 186 */ >; }; pinctrl_gpio2: gpio2-grp { /* Camera */ fsl,pins = < - MX6UL_PAD_CSI_DATA04__GPIO4_IO25 0x74 /* SODIMM 69 */ - MX6UL_PAD_CSI_MCLK__GPIO4_IO17 0x14 /* SODIMM 75 */ - MX6UL_PAD_CSI_DATA06__GPIO4_IO27 0x14 /* SODIMM 85 */ - MX6UL_PAD_CSI_PIXCLK__GPIO4_IO18 0x14 /* SODIMM 96 */ - MX6UL_PAD_CSI_DATA05__GPIO4_IO26 0x14 /* SODIMM 98 */ + MX6UL_PAD_CSI_DATA04__GPIO4_IO25 0x10b0 /* SODIMM 69 */ + MX6UL_PAD_CSI_MCLK__GPIO4_IO17 0x10b0 /* SODIMM 75 */ + MX6UL_PAD_CSI_DATA06__GPIO4_IO27 0x10b0 /* SODIMM 85 */ + MX6UL_PAD_CSI_PIXCLK__GPIO4_IO18 0x10b0 /* SODIMM 96 */ + MX6UL_PAD_CSI_DATA05__GPIO4_IO26 0x10b0 /* SODIMM 98 */ >; }; pinctrl_gpio3: gpio3-grp { /* CAN2 */ fsl,pins = < - MX6UL_PAD_ENET1_RX_EN__GPIO2_IO02 0x14 /* SODIMM 178 */ - MX6UL_PAD_ENET1_TX_DATA0__GPIO2_IO03 0x14 /* SODIMM 188 */ + MX6UL_PAD_ENET1_RX_EN__GPIO2_IO02 0x10b0 /* SODIMM 178 */ + MX6UL_PAD_ENET1_TX_DATA0__GPIO2_IO03 0x10b0 /* SODIMM 188 */ >; }; pinctrl_gpio4: gpio4-grp { fsl,pins = < - MX6UL_PAD_CSI_DATA07__GPIO4_IO28 0x74 /* SODIMM 65 */ + MX6UL_PAD_CSI_DATA07__GPIO4_IO28 0x10b0 /* SODIMM 65 */ >; }; pinctrl_gpio5: gpio5-grp { /* ATMEL MXT TOUCH */ fsl,pins = < - MX6UL_PAD_JTAG_MOD__GPIO1_IO10 0x74 /* SODIMM 106 */ + MX6UL_PAD_JTAG_MOD__GPIO1_IO10 0xb0a0 /* SODIMM 106 */ >; }; pinctrl_gpio6: gpio6-grp { /* Wifi pins */ fsl,pins = < - MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0x14 /* SODIMM 89 */ - MX6UL_PAD_CSI_DATA02__GPIO4_IO23 0x14 /* SODIMM 79 */ - MX6UL_PAD_CSI_VSYNC__GPIO4_IO19 0x14 /* SODIMM 81 */ - MX6UL_PAD_CSI_DATA03__GPIO4_IO24 0x14 /* SODIMM 97 */ - MX6UL_PAD_CSI_DATA00__GPIO4_IO21 0x14 /* SODIMM 101 */ - MX6UL_PAD_CSI_DATA01__GPIO4_IO22 0x14 /* SODIMM 103 */ - MX6UL_PAD_CSI_HSYNC__GPIO4_IO20 0x14 /* SODIMM 94 */ + MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0x10b0 /* SODIMM 89 */ + MX6UL_PAD_CSI_DATA02__GPIO4_IO23 0x10b0 /* SODIMM 79 */ + MX6UL_PAD_CSI_VSYNC__GPIO4_IO19 0x10b0 /* SODIMM 81 */ + MX6UL_PAD_CSI_DATA03__GPIO4_IO24 0x10b0 /* SODIMM 97 */ + MX6UL_PAD_CSI_DATA00__GPIO4_IO21 0x10b0 /* SODIMM 101 */ + MX6UL_PAD_CSI_DATA01__GPIO4_IO22 0x10b0 /* SODIMM 103 */ + MX6UL_PAD_CSI_HSYNC__GPIO4_IO20 0x10b0 /* SODIMM 94 */ + >; + }; + + pinctrl_gpio7: gpio7-grp { /* CAN1 */ + fsl,pins = < + MX6UL_PAD_ENET1_RX_DATA0__GPIO2_IO00 0xb0b0/* SODIMM 55 */ + MX6UL_PAD_ENET1_RX_DATA1__GPIO2_IO01 0xb0b0 /* SODIMM 63 */ >; }; @@ -324,15 +370,15 @@ pinctrl_i2c1: i2c1-grp { fsl,pins = < - MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0 - MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0 + MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0 /* SODIMM 196 */ + MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0 /* SODIMM 194 */ >; }; pinctrl_i2c1_gpio: i2c1-gpio-grp { fsl,pins = < - MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28 0x4001b8b0 - MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29 0x4001b8b0 + MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28 0x4001b8b0 /* SODIMM 196 */ + MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29 0x4001b8b0 /* SODIMM 194 */ >; }; @@ -352,107 +398,107 @@ pinctrl_lcdif_dat: lcdif-dat-grp { fsl,pins = < - MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x00079 - MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x00079 - MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x00079 - MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x00079 - MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x00079 - MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x00079 - MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x00079 - MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x00079 - MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x00079 - MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x00079 - MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x00079 - MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x00079 - MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x00079 - MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x00079 - MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x00079 - MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x00079 - MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x00079 - MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x00079 + MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x00079 /* SODIMM 76 */ + MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x00079 /* SODIMM 70 */ + MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x00079 /* SODIMM 60 */ + MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x00079 /* SODIMM 58 */ + MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x00079 /* SODIMM 78 */ + MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x00079 /* SODIMM 72 */ + MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x00079 /* SODIMM 80 */ + MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x00079 /* SODIMM 46 */ + MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x00079 /* SODIMM 62 */ + MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x00079 /* SODIMM 48 */ + MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x00079 /* SODIMM 74 */ + MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x00079 /* SODIMM 50 */ + MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x00079 /* SODIMM 52 */ + MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x00079 /* SODIMM 54 */ + MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x00079 /* SODIMM 66 */ + MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x00079 /* SODIMM 64 */ + MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x00079 /* SODIMM 57 */ + MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x00079 /* SODIMM 61 */ >; }; pinctrl_lcdif_ctrl: lcdif-ctrl-grp { fsl,pins = < - MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x00079 - MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x00079 - MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x00079 - MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x00079 + MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x00079 /* SODIMM 56 */ + MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x00079 /* SODIMM 44 */ + MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x00079 /* SODIMM 68 */ + MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x00079 /* SODIMM 82 */ >; }; pinctrl_pwm4: pwm4-grp { fsl,pins = < - MX6UL_PAD_NAND_WP_B__PWM4_OUT 0x00079 + MX6UL_PAD_NAND_WP_B__PWM4_OUT 0x00079 /* SODIMM 59 */ >; }; pinctrl_pwm5: pwm5-grp { fsl,pins = < - MX6UL_PAD_NAND_DQS__PWM5_OUT 0x00079 + MX6UL_PAD_NAND_DQS__PWM5_OUT 0x00079 /* SODIMM 28 */ >; }; pinctrl_pwm6: pwm6-grp { fsl,pins = < - MX6UL_PAD_ENET1_TX_EN__PWM6_OUT 0x00079 + MX6UL_PAD_ENET1_TX_EN__PWM6_OUT 0x00079 /* SODIMM 30 */ >; }; pinctrl_pwm7: pwm7-grp { fsl,pins = < - MX6UL_PAD_ENET1_TX_CLK__PWM7_OUT 0x00079 + MX6UL_PAD_ENET1_TX_CLK__PWM7_OUT 0x00079 /* SODIMM 67 */ >; }; pinctrl_uart1: uart1-grp { fsl,pins = < - MX6UL_PAD_UART1_TX_DATA__UART1_DTE_RX 0x1b0b1 - MX6UL_PAD_UART1_RX_DATA__UART1_DTE_TX 0x1b0b1 - MX6UL_PAD_UART1_RTS_B__UART1_DTE_CTS 0x1b0b1 - MX6UL_PAD_UART1_CTS_B__UART1_DTE_RTS 0x1b0b1 + MX6UL_PAD_UART1_TX_DATA__UART1_DTE_RX 0x1b0b1 /* SODIMM 33 */ + MX6UL_PAD_UART1_RX_DATA__UART1_DTE_TX 0x1b0b1 /* SODIMM 35 */ + MX6UL_PAD_UART1_RTS_B__UART1_DTE_CTS 0x1b0b1 /* SODIMM 27 */ + MX6UL_PAD_UART1_CTS_B__UART1_DTE_RTS 0x1b0b1 /* SODIMM 25 */ >; }; pinctrl_uart1_ctrl1: uart1-ctrl1-grp { /* Additional DTR, DCD */ fsl,pins = < - MX6UL_PAD_JTAG_TDI__GPIO1_IO13 0x1b0b1 /* DCD */ - MX6UL_PAD_LCD_DATA18__GPIO3_IO23 0x1b0b1 /* DSR */ - MX6UL_PAD_JTAG_TDO__GPIO1_IO12 0x1b0b1 /* DTR */ - MX6UL_PAD_LCD_DATA19__GPIO3_IO24 0x1b0b1 /* RI */ + MX6UL_PAD_JTAG_TDI__GPIO1_IO13 0x70a0 /* SODIMM 31 */ + MX6UL_PAD_LCD_DATA18__GPIO3_IO23 0x10b0 /* SODIMM 29 */ + MX6UL_PAD_JTAG_TDO__GPIO1_IO12 0x90b1 /* SODIMM 23 */ + MX6UL_PAD_LCD_DATA19__GPIO3_IO24 0x10b0 /* SODIMM 37 */ >; }; pinctrl_uart2: uart2-grp { fsl,pins = < - MX6UL_PAD_UART2_TX_DATA__UART2_DTE_RX 0x1b0b1 - MX6UL_PAD_UART2_RX_DATA__UART2_DTE_TX 0x1b0b1 - MX6UL_PAD_UART2_CTS_B__UART2_DTE_RTS 0x1b0b1 - MX6UL_PAD_UART2_RTS_B__UART2_DTE_CTS 0x1b0b1 + MX6UL_PAD_UART2_TX_DATA__UART2_DTE_RX 0x1b0b1 /* SODIMM 36 */ + MX6UL_PAD_UART2_RX_DATA__UART2_DTE_TX 0x1b0b1 /* SODIMM 38 */ + MX6UL_PAD_UART2_CTS_B__UART2_DTE_RTS 0x1b0b1 /* SODIMM 32 */ + MX6UL_PAD_UART2_RTS_B__UART2_DTE_CTS 0x1b0b1 /* SODIMM 34 */ >; }; pinctrl_uart5: uart5-grp { fsl,pins = < - MX6UL_PAD_GPIO1_IO04__UART5_DTE_RX 0x1b0b1 - MX6UL_PAD_GPIO1_IO05__UART5_DTE_TX 0x1b0b1 + MX6UL_PAD_GPIO1_IO04__UART5_DTE_RX 0x1b0b1 /* SODIMM 19 */ + MX6UL_PAD_GPIO1_IO05__UART5_DTE_TX 0x1b0b1 /* SODIMM 21 */ >; }; pinctrl_usbh_reg: gpio-usbh-reg { fsl,pins = < - MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0x1b0b1 /* SODIMM 129 USBH PEN */ + MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0x10b0 /* SODIMM 129 */ >; }; pinctrl_usdhc1: usdhc1-grp { fsl,pins = < - MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x17059 - MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x10059 - MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059 - MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059 - MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059 - MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x17059 /* SODIMM 47 */ + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x10059 /* SODIMM 190 */ + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059 /* SODIMM 192 */ + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059 /* SODIMM 49 */ + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059 /* SODIMM 51 */ + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059 /* SODIMM 53 */ >; }; @@ -487,7 +533,13 @@ MX6UL_PAD_CSI_HSYNC__USDHC2_CMD 0x17059 MX6UL_PAD_CSI_VSYNC__USDHC2_CLK 0x17059 - MX6UL_PAD_GPIO1_IO03__OSC32K_32K_OUT 0x14 + MX6UL_PAD_GPIO1_IO03__OSC32K_32K_OUT 0x10 + >; + }; + + pinctrl_wdog: wdog-grp { + fsl,pins = < + MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY 0x30b0 >; }; }; @@ -495,53 +547,53 @@ &iomuxc_snvs { pinctrl_snvs_gpio1: snvs-gpio1-grp { fsl,pins = < - MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x14 /* SODIMM 93 */ - MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x14 /* SODIMM 95 */ - MX6ULL_PAD_BOOT_MODE0__GPIO5_IO10 0x74 /* SODIMM 105 */ - MX6ULL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x14 /* SODIMM 131 USBH OC */ - MX6ULL_PAD_SNVS_TAMPER8__GPIO5_IO08 0x74 /* SODIMM 138 */ + MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x110a0 /* SODIMM 93 */ + MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x110a0 /* SODIMM 95 */ + MX6ULL_PAD_BOOT_MODE0__GPIO5_IO10 0x1b0a0 /* SODIMM 105 */ + MX6ULL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x0b0a0 /* SODIMM 131 */ + MX6ULL_PAD_SNVS_TAMPER8__GPIO5_IO08 0x110a0 /* SODIMM 138 */ >; }; pinctrl_snvs_gpio2: snvs-gpio2-grp { /* ATMEL MXT TOUCH */ fsl,pins = < - MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x74 /* SODIMM 107 */ + MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04 0xb0a0 /* SODIMM 107 */ >; }; pinctrl_snvs_gpio3: snvs-gpio3-grp { /* Wifi pins */ fsl,pins = < - MX6ULL_PAD_BOOT_MODE1__GPIO5_IO11 0x14 /* SODIMM 127 */ + MX6ULL_PAD_BOOT_MODE1__GPIO5_IO11 0x130a0 /* SODIMM 127 */ >; }; pinctrl_snvs_ad7879_int: snvs-ad7879-int-grp { /* TOUCH Interrupt */ fsl,pins = < - MX6ULL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x1b0b0 + MX6ULL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x100b0 >; }; pinctrl_snvs_reg_sd: snvs-reg-sd-grp { fsl,pins = < - MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x4001b8b0 + MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x400100b0 >; }; pinctrl_snvs_usbc_det: snvs-usbc-det-grp { fsl,pins = < - MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x1b0b0 + MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x130b0 >; }; pinctrl_snvs_gpiokeys: snvs-gpiokeys-grp { fsl,pins = < - MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x130b0 + MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x130a0 /* SODIMM 45 */ >; }; pinctrl_snvs_usdhc1_cd: snvs-usdhc1-cd-grp { fsl,pins = < - MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x1b0b0 /* CD */ + MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x1b0a0 /* SODIMM 43 */ >; }; @@ -553,7 +605,7 @@ pinctrl_snvs_wifi_pdn: snvs-wifi-pdn-grp { fsl,pins = < - MX6ULL_PAD_BOOT_MODE1__GPIO5_IO11 0x14 + MX6ULL_PAD_BOOT_MODE1__GPIO5_IO11 0x130a0 >; }; }; diff --git a/arch/arm/boot/dts/imx6ull-kontron-n6411-s.dts b/arch/arm/boot/dts/imx6ull-kontron-n6411-s.dts new file mode 100644 index 000000000000..57588a5e1e34 --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-kontron-n6411-s.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2017 exceet electronics GmbH + * Copyright (C) 2019 Kontron Electronics GmbH + */ + +/dts-v1/; + +#include "imx6ull-kontron-n6411-som.dtsi" +#include "imx6ul-kontron-n6x1x-s.dtsi" + +/ { + model = "Kontron N6411 S"; + compatible = "kontron,imx6ull-n6411-s", "kontron,imx6ull-n6411-som", + "fsl,imx6ull"; +}; diff --git a/arch/arm/boot/dts/imx6ull-kontron-n6411-som.dtsi b/arch/arm/boot/dts/imx6ull-kontron-n6411-som.dtsi new file mode 100644 index 000000000000..b7e984284e1a --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-kontron-n6411-som.dtsi @@ -0,0 +1,40 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2017 exceet electronics GmbH + * Copyright (C) 2018 Kontron Electronics GmbH + */ + +#include "imx6ull.dtsi" +#include "imx6ul-kontron-n6x1x-som-common.dtsi" + +/ { + model = "Kontron N6411 SOM"; + compatible = "kontron,imx6ull-n6311-som", "fsl,imx6ull"; + + memory@80000000 { + reg = <0x80000000 0x20000000>; + device_type = "memory"; + }; +}; + +&qspi { + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spi-nand"; + spi-max-frequency = <104000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + reg = <0>; + + partition@0 { + label = "ubi1"; + reg = <0x00000000 0x08000000>; + }; + + partition@8000000 { + label = "ubi2"; + reg = <0x08000000 0x18000000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx6ull-opos6ul.dtsi b/arch/arm/boot/dts/imx6ull-opos6ul.dtsi new file mode 100644 index 000000000000..155f941f2811 --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-opos6ul.dtsi @@ -0,0 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +// +// Copyright 2019 Armadeus Systems <support@armadeus.com> + +#include "imx6ull.dtsi" +#include "imx6ul-imx6ull-opos6ul.dtsi" diff --git a/arch/arm/boot/dts/imx6ull-opos6uldev.dts b/arch/arm/boot/dts/imx6ull-opos6uldev.dts new file mode 100644 index 000000000000..198fdb72641b --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-opos6uldev.dts @@ -0,0 +1,42 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +// +// Copyright 2019 Armadeus Systems <support@armadeus.com> + +/dts-v1/; +#include "imx6ull-opos6ul.dtsi" +#include "imx6ul-imx6ull-opos6uldev.dtsi" + +/ { + model = "Armadeus Systems OPOS6UL SoM (i.MX6ULL) on OPOS6ULDev board"; + compatible = "armadeus,imx6ull-opos6uldev", "armadeus,imx6ull-opos6ul", "fsl,imx6ull"; +}; + +&iomuxc_snvs { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tamper_gpios>; + + pinctrl_tamper_gpios: tampergpiosgrp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x0b0b0 + MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x0b0b0 + MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x0b0b0 + MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x0b0b0 + MX6ULL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x0b0b0 + MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x0b0b0 + MX6ULL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x0b0b0 + MX6ULL_PAD_SNVS_TAMPER8__GPIO5_IO08 0x0b0b0 + >; + }; + + pinctrl_usbotg2_vbus: usbotg2vbusgrp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x1b0b0 + >; + }; + + pinctrl_w1: w1grp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x0b0b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6ull-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx6ull-phytec-phycore-som.dtsi new file mode 100644 index 000000000000..56cd16e5a77f --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-phytec-phycore-som.dtsi @@ -0,0 +1,24 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2019 PHYTEC Messtechnik GmbH + * Author: Stefan Riedmueller <s.riedmueller@phytec.de> + */ + +#include "imx6ul-phytec-phycore-som.dtsi" + +/ { + model = "PHYTEC phyCORE-i.MX6 ULL"; + compatible = "phytec,imx6ull-pcl063", "fsl,imx6ull"; +}; + +&iomuxc { + /delete-node/ gpioledssomgrp; +}; + +&iomuxc_snvs { + pinctrl_gpioleds_som: gpioledssomgrp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x0b0b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-emmc.dts b/arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-emmc.dts new file mode 100644 index 000000000000..9648d4ecaf58 --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-emmc.dts @@ -0,0 +1,93 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2019 PHYTEC Messtechnik GmbH + * Author: Stefan Riedmueller <s.riedmueller@phytec.de> + */ + +/dts-v1/; +#include "imx6ull.dtsi" +#include "imx6ull-phytec-phycore-som.dtsi" +#include "imx6ull-phytec-segin.dtsi" +#include "imx6ull-phytec-segin-peb-eval-01.dtsi" + +/ { + model = "PHYTEC phyBOARD-Segin i.MX6 ULL Full Featured with eMMC"; + compatible = "phytec,imx6ull-pbacd10-emmc", "phytec,imx6ull-pbacd10", + "phytec,imx6ull-pcl063","fsl,imx6ull"; +}; + +&adc1 { + status = "okay"; +}; + +&can1 { + status = "okay"; +}; + +&tlv320 { + status = "okay"; +}; + +&ecspi3 { + status = "okay"; +}; + +ðphy1 { + status = "okay"; +}; + +ðphy2 { + status = "okay"; +}; + +&fec1 { + status = "okay"; +}; + +&fec2 { + status = "okay"; +}; + +&i2c_rtc { + status = "okay"; +}; + +®_can1_en { + status = "okay"; +}; + +®_sound_1v8 { + status = "okay"; +}; + +®_sound_3v3 { + status = "okay"; +}; + +&sai2 { + status = "okay"; +}; + +&sound { + status = "okay"; +}; + +&uart5 { + status = "okay"; +}; + +&usbotg1 { + status = "okay"; +}; + +&usbotg2 { + status = "okay"; +}; + +&usdhc1 { + status = "okay"; +}; + +&usdhc2 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-nand.dts b/arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-nand.dts new file mode 100644 index 000000000000..656baf846453 --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-nand.dts @@ -0,0 +1,93 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2019 PHYTEC Messtechnik GmbH + * Author: Stefan Riedmueller <s.riedmueller@phytec.de> + */ + +/dts-v1/; +#include "imx6ull.dtsi" +#include "imx6ull-phytec-phycore-som.dtsi" +#include "imx6ull-phytec-segin.dtsi" +#include "imx6ull-phytec-segin-peb-eval-01.dtsi" + +/ { + model = "PHYTEC phyBOARD-Segin i.MX6 ULL Full Featured with NAND"; + compatible = "phytec,imx6ull-pbacd10-nand", "phytec,imx6ull-pbacd10", + "phytec,imx6ull-pcl063", "fsl,imx6ull"; +}; + +&adc1 { + status = "okay"; +}; + +&can1 { + status = "okay"; +}; + +&tlv320 { + status = "okay"; +}; + +&ecspi3 { + status = "okay"; +}; + +ðphy1 { + status = "okay"; +}; + +ðphy2 { + status = "okay"; +}; + +&fec1 { + status = "okay"; +}; + +&fec2 { + status = "okay"; +}; + +&gpmi { + status = "okay"; +}; + +&i2c_rtc { + status = "okay"; +}; + +®_can1_en { + status = "okay"; +}; + +®_sound_1v8 { + status = "okay"; +}; + +®_sound_3v3 { + status = "okay"; +}; + +&sai2 { + status = "okay"; +}; + +&sound { + status = "okay"; +}; + +&uart5 { + status = "okay"; +}; + +&usbotg1 { + status = "okay"; +}; + +&usbotg2 { + status = "okay"; +}; + +&usdhc1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6ull-phytec-segin-lc-rdk-nand.dts b/arch/arm/boot/dts/imx6ull-phytec-segin-lc-rdk-nand.dts new file mode 100644 index 000000000000..e168494e0a6d --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-phytec-segin-lc-rdk-nand.dts @@ -0,0 +1,45 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2019 PHYTEC Messtechnik GmbH + * Author: Stefan Riedmueller <s.riedmueller@phytec.de> + */ + +/dts-v1/; +#include "imx6ull.dtsi" +#include "imx6ull-phytec-phycore-som.dtsi" +#include "imx6ull-phytec-segin.dtsi" +#include "imx6ull-phytec-segin-peb-eval-01.dtsi" + +/ { + model = "PHYTEC phyBOARD-Segin i.MX6 ULL Low Cost with NAND"; + compatible = "phytec,imx6ull-pbacd10-nand", "phytec,imx6ull-pbacd10", + "phytec,imx6ull-pcl063", "fsl,imx6ull"; +}; + +&adc1 { + status = "okay"; +}; + +ðphy1 { + status = "okay"; +}; + +&fec1 { + status = "okay"; +}; + +&gpmi { + status = "okay"; +}; + +&i2c_rtc { + status = "okay"; +}; + +&usbotg1 { + status = "okay"; +}; + +&usdhc1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6ull-phytec-segin-peb-eval-01.dtsi b/arch/arm/boot/dts/imx6ull-phytec-segin-peb-eval-01.dtsi new file mode 100644 index 000000000000..ff08d95a1aa2 --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-phytec-segin-peb-eval-01.dtsi @@ -0,0 +1,19 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2019 PHYTEC Messtechnik GmbH + * Author: Stefan Riedmueller <s.riedmueller@phytec.de> + */ + +#include "imx6ul-phytec-segin-peb-eval-01.dtsi" + +&iomuxc { + /delete-node/ gpio_keysgrp; +}; + +&iomuxc_snvs { + pinctrl_gpio_keys: gpio_keysgrp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x79 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6ull-phytec-segin.dtsi b/arch/arm/boot/dts/imx6ull-phytec-segin.dtsi new file mode 100644 index 000000000000..c1595fc785f7 --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-phytec-segin.dtsi @@ -0,0 +1,38 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2019 PHYTEC Messtechnik GmbH + * Author: Stefan Riedmueller <s.riedmueller@phytec.de> + */ + +#include "imx6ul-phytec-segin.dtsi" + +/ { + model = "PHYTEC phyBOARD-Segin i.MX6 ULL"; + compatible = "phytec,imx6ull-pbacd-10", "phytec,imx6ull-pcl063","fsl,imx6ull"; +}; + +&iomuxc { + /delete-node/ flexcan1engrp; + /delete-node/ rtcintgrp; + /delete-node/ stmpegrp; +}; + +&iomuxc_snvs { + princtrl_flexcan1_en: flexcan1engrp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x17059 + >; + }; + + pinctrl_rtc_int: rtcintgrp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x17059 + >; + }; + + pinctrl_stmpe: stmpegrp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x17059 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi index 3f2746169181..6aa123cbdadb 100644 --- a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi +++ b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi @@ -52,6 +52,20 @@ clock-frequency = <16000000>; }; + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpiokeys>; + + power { + label = "Wake-Up"; + gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; + linux,code = <KEY_WAKEUP>; + debounce-interval = <10>; + wakeup-source; + }; + }; + panel: panel { compatible = "edt,et057090dhu"; backlight = <&bl>; @@ -131,6 +145,21 @@ &i2c4 { status = "okay"; + /* + * Touchscreen is using SODIMM 28/30, also used for PWM<B>, PWM<C>, + * aka pwm2, pwm3. so if you enable touchscreen, disable the pwms + */ + touchscreen@4a { + compatible = "atmel,maxtouch"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpiotouch>; + reg = <0x4a>; + interrupt-parent = <&gpio1>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; /* SODIMM 28 */ + reset-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; /* SODIMM 30 */ + status = "disabled"; + }; + /* M41T0M6 real time clock on carrier board */ rtc: m41t0m6@68 { compatible = "st,m41t0"; @@ -186,3 +215,12 @@ vmmc-supply = <®_3v3>; status = "okay"; }; + +&iomuxc { + pinctrl_gpiotouch: touchgpios { + fsl,pins = < + MX7D_PAD_GPIO1_IO09__GPIO1_IO9 0x74 + MX7D_PAD_GPIO1_IO10__GPIO1_IO10 0x14 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi index 895fbde4d433..d05be3f0e2a7 100644 --- a/arch/arm/boot/dts/imx7-colibri.dtsi +++ b/arch/arm/boot/dts/imx7-colibri.dtsi @@ -54,6 +54,7 @@ regulator-name = "+V3.3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + regulator-always-on; }; reg_module_3v3_avdd: regulator-module-3v3-avdd { @@ -61,6 +62,7 @@ regulator-name = "+V3.3_AVDD_AUDIO"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + regulator-always-on; }; sound { @@ -99,8 +101,9 @@ }; &fec1 { - pinctrl-names = "default"; + pinctrl-names = "default", "sleep"; pinctrl-0 = <&pinctrl_enet1>; + pinctrl-1 = <&pinctrl_enet1_sleep>; clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>, <&clks IMX7D_ENET_AXI_ROOT_CLK>, <&clks IMX7D_ENET1_TIME_ROOT_CLK>, @@ -115,6 +118,18 @@ fsl,magic-packet; }; +&flexcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + status = "disabled"; +}; + +&flexcan2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + status = "disabled"; +}; + &gpmi { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpmi_nand>; @@ -125,8 +140,12 @@ &i2c1 { clock-frequency = <100000>; - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c1 &pinctrl_i2c1_int>; + pinctrl-1 = <&pinctrl_i2c1_recovery &pinctrl_i2c1_int>; + scl-gpios = <&gpio1 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio1 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; codec: sgtl5000@a { @@ -227,8 +246,11 @@ &i2c4 { clock-frequency = <100000>; - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c4>; + pinctrl-1 = <&pinctrl_i2c4_recovery>; + scl-gpios = <&gpio7 8 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio7 9 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; }; &lcdif { @@ -267,10 +289,6 @@ status = "okay"; }; -&snvs_pwrkey { - status = "disabled"; -}; - &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1 &pinctrl_uart1_ctrl1 &pinctrl_uart1_ctrl2>; @@ -304,7 +322,6 @@ &usdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_cd_usdhc1>; - no-1-8-v; cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; disable-wp; vqmmc-supply = <®_LDO2>; @@ -323,16 +340,16 @@ vmmc-supply = <®_module_3v3>; vqmmc-supply = <®_DCDC3>; non-removable; + sdhci-caps-mask = <0x80000000 0x0>; }; &iomuxc { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3 &pinctrl_gpio4>; + pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3 &pinctrl_gpio4 + &pinctrl_gpio7>; pinctrl_gpio1: gpio1-grp { fsl,pins = < - MX7D_PAD_ENET1_RGMII_RD3__GPIO7_IO3 0x74 /* SODIMM 55 */ - MX7D_PAD_ENET1_RGMII_RD2__GPIO7_IO2 0x74 /* SODIMM 63 */ MX7D_PAD_SAI1_RX_SYNC__GPIO6_IO16 0x14 /* SODIMM 77 */ MX7D_PAD_EPDC_DATA09__GPIO2_IO9 0x14 /* SODIMM 89 */ MX7D_PAD_EPDC_DATA08__GPIO2_IO8 0x74 /* SODIMM 91 */ @@ -413,6 +430,13 @@ >; }; + pinctrl_gpio7: gpio7-grp { /* Alternatively CAN1 */ + fsl,pins = < + MX7D_PAD_ENET1_RGMII_RD3__GPIO7_IO3 0x14 /* SODIMM 55 */ + MX7D_PAD_ENET1_RGMII_RD2__GPIO7_IO2 0x14 /* SODIMM 63 */ + >; + }; + pinctrl_i2c1_int: i2c1-int-grp { /* PMIC / TOUCH */ fsl,pins = < MX7D_PAD_GPIO1_IO13__GPIO1_IO13 0x79 @@ -442,6 +466,22 @@ >; }; + pinctrl_enet1_sleep: enet1sleepgrp { + fsl,pins = < + MX7D_PAD_ENET1_RGMII_RX_CTL__GPIO7_IO4 0x0 + MX7D_PAD_ENET1_RGMII_RD0__GPIO7_IO0 0x0 + MX7D_PAD_ENET1_RGMII_RD1__GPIO7_IO1 0x0 + MX7D_PAD_ENET1_RGMII_RXC__GPIO7_IO5 0x0 + + MX7D_PAD_ENET1_RGMII_TX_CTL__GPIO7_IO10 0x0 + MX7D_PAD_ENET1_RGMII_TD0__GPIO7_IO6 0x0 + MX7D_PAD_ENET1_RGMII_TD1__GPIO7_IO7 0x0 + MX7D_PAD_GPIO1_IO12__GPIO1_IO12 0x0 + MX7D_PAD_SD2_CD_B__GPIO5_IO9 0x0 + MX7D_PAD_SD2_WP__GPIO5_IO10 0x0 + >; + }; + pinctrl_ecspi3_cs: ecspi3-cs-grp { fsl,pins = < MX7D_PAD_I2C2_SDA__GPIO4_IO11 0x14 @@ -456,10 +496,17 @@ >; }; + pinctrl_flexcan1: flexcan1-grp { + fsl,pins = < + MX7D_PAD_ENET1_RGMII_RD3__FLEXCAN1_TX 0x79 /* SODIMM 55 */ + MX7D_PAD_ENET1_RGMII_RD2__FLEXCAN1_RX 0x79 /* SODIMM 63 */ + >; + }; + pinctrl_flexcan2: flexcan2-grp { fsl,pins = < - MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX 0x59 - MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX 0x59 + MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX 0x79 /* SODIMM 188 */ + MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX 0x79 /* SODIMM 178 */ >; }; @@ -495,6 +542,13 @@ >; }; + pinctrl_i2c4_recovery: i2c4-recoverygrp { + fsl,pins = < + MX7D_PAD_ENET1_RGMII_TD2__GPIO7_IO8 0x4000007f + MX7D_PAD_ENET1_RGMII_TD3__GPIO7_IO9 0x4000007f + >; + }; + pinctrl_lcdif_dat: lcdif-dat-grp { fsl,pins = < MX7D_PAD_LCD_DATA00__LCD_DATA0 0x79 @@ -612,6 +666,28 @@ >; }; + pinctrl_usdhc1_100mhz: usdhc1grp_100mhz { + fsl,pins = < + MX7D_PAD_SD1_CMD__SD1_CMD 0x5a + MX7D_PAD_SD1_CLK__SD1_CLK 0x1a + MX7D_PAD_SD1_DATA0__SD1_DATA0 0x5a + MX7D_PAD_SD1_DATA1__SD1_DATA1 0x5a + MX7D_PAD_SD1_DATA2__SD1_DATA2 0x5a + MX7D_PAD_SD1_DATA3__SD1_DATA3 0x5a + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1grp_200mhz { + fsl,pins = < + MX7D_PAD_SD1_CMD__SD1_CMD 0x5b + MX7D_PAD_SD1_CLK__SD1_CLK 0x1b + MX7D_PAD_SD1_DATA0__SD1_DATA0 0x5b + MX7D_PAD_SD1_DATA1__SD1_DATA1 0x5b + MX7D_PAD_SD1_DATA2__SD1_DATA2 0x5b + MX7D_PAD_SD1_DATA3__SD1_DATA3 0x5b + >; + }; + pinctrl_usdhc3: usdhc3grp { fsl,pins = < MX7D_PAD_SD3_CMD__SD3_CMD 0x59 @@ -682,12 +758,17 @@ pinctrl_gpio_lpsr: gpio1-grp { fsl,pins = < - MX7D_PAD_LPSR_GPIO1_IO01__GPIO1_IO1 0x59 MX7D_PAD_LPSR_GPIO1_IO02__GPIO1_IO2 0x59 MX7D_PAD_LPSR_GPIO1_IO03__GPIO1_IO3 0x59 >; }; + pinctrl_gpiokeys: gpiokeysgrp { + fsl,pins = < + MX7D_PAD_LPSR_GPIO1_IO01__GPIO1_IO1 0x19 + >; + }; + pinctrl_i2c1: i2c1-grp { fsl,pins = < MX7D_PAD_LPSR_GPIO1_IO05__I2C1_SDA 0x4000007f @@ -695,6 +776,13 @@ >; }; + pinctrl_i2c1_recovery: i2c1-recoverygrp { + fsl,pins = < + MX7D_PAD_LPSR_GPIO1_IO04__GPIO1_IO4 0x4000007f + MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5 0x4000007f + >; + }; + pinctrl_cd_usdhc1: usdhc1-cd-grp { fsl,pins = < MX7D_PAD_LPSR_GPIO1_IO00__GPIO1_IO0 0x59 /* CD */ diff --git a/arch/arm/boot/dts/imx7d-cl-som-imx7.dts b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts index e61567437d73..7646284e13a7 100644 --- a/arch/arm/boot/dts/imx7d-cl-som-imx7.dts +++ b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts @@ -44,7 +44,7 @@ <&clks IMX7D_ENET1_TIME_ROOT_CLK>; assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>; assigned-clock-rates = <0>, <100000000>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-handle = <ðphy0>; fsl,magic-packet; status = "okay"; @@ -54,10 +54,12 @@ #size-cells = <0>; ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; reg = <0>; }; ethphy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; reg = <1>; }; }; @@ -70,7 +72,7 @@ <&clks IMX7D_ENET2_TIME_ROOT_CLK>; assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>; assigned-clock-rates = <0>, <100000000>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-handle = <ðphy1>; fsl,magic-packet; status = "okay"; diff --git a/arch/arm/boot/dts/imx7d-pico.dtsi b/arch/arm/boot/dts/imx7d-pico.dtsi index 6f50ebf31a0a..e57da0d32b98 100644 --- a/arch/arm/boot/dts/imx7d-pico.dtsi +++ b/arch/arm/boot/dts/imx7d-pico.dtsi @@ -7,12 +7,42 @@ #include "imx7d.dtsi" / { + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm4 0 50000 0>; + brightness-levels = <0 36 72 108 144 180 216 255>; + default-brightness-level = <6>; + }; + /* Will be filled by the bootloader */ memory@80000000 { device_type = "memory"; reg = <0x80000000 0>; }; + panel { + compatible = "vxt,vl050-8048nt-c01"; + backlight = <&backlight>; + power-supply = <®_lcd_3v3>; + + port { + panel_in: endpoint { + remote-endpoint = <&display_out>; + }; + }; + }; + + reg_lcd_3v3: regulator-lcd-3v3 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_lcdreg_on>; + regulator-name = "lcd-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 6 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + reg_wlreg_on: regulator-wlreg_on { compatible = "regulator-fixed"; pinctrl-names = "default"; @@ -230,6 +260,18 @@ }; }; +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcdif>; + status = "okay"; + + port { + display_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; +}; + &sai1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sai1>; @@ -260,6 +302,8 @@ }; &pwm4 { /* Backlight */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; status = "okay"; }; @@ -413,6 +457,40 @@ >; }; + pinctrl_lcdif: lcdifgrp { + fsl,pins = < + MX7D_PAD_LCD_DATA00__LCD_DATA0 0x79 + MX7D_PAD_LCD_DATA01__LCD_DATA1 0x79 + MX7D_PAD_LCD_DATA02__LCD_DATA2 0x79 + MX7D_PAD_LCD_DATA03__LCD_DATA3 0x79 + MX7D_PAD_LCD_DATA04__LCD_DATA4 0x79 + MX7D_PAD_LCD_DATA05__LCD_DATA5 0x79 + MX7D_PAD_LCD_DATA06__LCD_DATA6 0x79 + MX7D_PAD_LCD_DATA07__LCD_DATA7 0x79 + MX7D_PAD_LCD_DATA08__LCD_DATA8 0x79 + MX7D_PAD_LCD_DATA09__LCD_DATA9 0x79 + MX7D_PAD_LCD_DATA10__LCD_DATA10 0x79 + MX7D_PAD_LCD_DATA11__LCD_DATA11 0x79 + MX7D_PAD_LCD_DATA12__LCD_DATA12 0x79 + MX7D_PAD_LCD_DATA13__LCD_DATA13 0x79 + MX7D_PAD_LCD_DATA14__LCD_DATA14 0x79 + MX7D_PAD_LCD_DATA15__LCD_DATA15 0x79 + MX7D_PAD_LCD_DATA16__LCD_DATA16 0x79 + MX7D_PAD_LCD_DATA17__LCD_DATA17 0x79 + MX7D_PAD_LCD_DATA18__LCD_DATA18 0x79 + MX7D_PAD_LCD_DATA19__LCD_DATA19 0x79 + MX7D_PAD_LCD_DATA20__LCD_DATA20 0x79 + MX7D_PAD_LCD_DATA21__LCD_DATA21 0x79 + MX7D_PAD_LCD_DATA22__LCD_DATA22 0x79 + MX7D_PAD_LCD_DATA23__LCD_DATA23 0x79 + MX7D_PAD_LCD_CLK__LCD_CLK 0x79 + MX7D_PAD_LCD_ENABLE__LCD_ENABLE 0x78 + MX7D_PAD_LCD_VSYNC__LCD_VSYNC 0x78 + MX7D_PAD_LCD_HSYNC__LCD_HSYNC 0x78 + MX7D_PAD_LCD_RESET__GPIO3_IO4 0x14 + >; + }; + pinctrl_pwm1: pwm1 { fsl,pins = < MX7D_PAD_GPIO1_IO08__PWM1_OUT 0x7f @@ -431,6 +509,12 @@ >; }; + pinctrl_pwm4: pwm4grp{ + fsl,pins = < + MX7D_PAD_GPIO1_IO11__PWM4_OUT 0x7f + >; + }; + pinctrl_reg_wlreg_on: regregongrp { fsl,pins = < MX7D_PAD_ECSPI1_SCLK__GPIO4_IO16 0x59 @@ -577,6 +661,12 @@ >; }; + pinctrl_reg_lcdreg_on: reglcdongrp { + fsl,pins = < + MX7D_PAD_LPSR_GPIO1_IO06__GPIO1_IO6 0x59 + >; + }; + pinctrl_wdog: wdoggrp { fsl,pins = < MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B 0x74 diff --git a/arch/arm/boot/dts/imx7d-sdb-reva.dts b/arch/arm/boot/dts/imx7d-sdb-reva.dts index 7ce9d8c91985..cabdaa6dc518 100644 --- a/arch/arm/boot/dts/imx7d-sdb-reva.dts +++ b/arch/arm/boot/dts/imx7d-sdb-reva.dts @@ -7,6 +7,9 @@ #include "imx7d-sdb.dts" / { + model = "Freescale i.MX7 SabreSD RevA Board"; + compatible = "fsl,imx7d-sdb-reva", "fsl,imx7d"; + reg_usb_otg2_vbus: regulator-usb-otg2-vbus { pinctrl-0 = <&pinctrl_usb_otg2_vbus_reg_reva>; gpio = <&gpio4 7 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/imx7d-zii-rmu2.dts b/arch/arm/boot/dts/imx7d-zii-rmu2.dts new file mode 100644 index 000000000000..2b8d6cc45a53 --- /dev/null +++ b/arch/arm/boot/dts/imx7d-zii-rmu2.dts @@ -0,0 +1,357 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Device tree file for ZII's RMU2 board + * + * RMU - Remote Modem Unit + * + * Copyright (C) 2019 Zodiac Inflight Innovations + */ + +/dts-v1/; +#include <dt-bindings/thermal/thermal.h> +#include "imx7d.dtsi" + +/ { + model = "ZII RMU2 Board"; + compatible = "zii,imx7d-rmu2", "fsl,imx7d"; + + chosen { + stdout-path = &uart2; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-0 = <&pinctrl_leds_debug>; + pinctrl-names = "default"; + + debug { + label = "zii:green:debug1"; + gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; +}; + +&cpu0 { + arm-supply = <&sw1a_reg>; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + cs-gpios = <&gpio4 19 GPIO_ACTIVE_HIGH>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + spi-max-frequency = <20000000>; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + }; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>; + assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>, + <&clks IMX7D_ENET1_TIME_ROOT_CLK>; + assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>; + assigned-clock-rates = <0>, <100000000>; + phy-mode = "rgmii"; + phy-handle = <&fec1_phy>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + fec1_phy: ethernet-phy@0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1_phy_reset>, + <&pinctrl_enet1_phy_interrupt>; + reg = <0>; + interrupt-parent = <&gpio1>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pmic@8 { + compatible = "fsl,pfuze3000"; + reg = <0x08>; + + regulators { + sw1a_reg: sw1a { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw1c_reg: sw1b { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1475000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1850000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3a_reg: sw3 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1650000>; + regulator-boot-on; + regulator-always-on; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + vgen1_reg: vldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen2_reg: vldo2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + regulator-always-on; + }; + + vgen3_reg: vccsd { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen4_reg: v33 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen5_reg: vldo3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen6_reg: vldo4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; + + eeprom@50 { + compatible = "atmel,24c04"; + reg = <0x50>; + }; + + eeprom@52 { + compatible = "atmel,24c04"; + reg = <0x52>; + }; +}; + +&snvs_rtc { + status = "disabled"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + assigned-clocks = <&clks IMX7D_UART2_ROOT_SRC>; + assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + assigned-clocks = <&clks IMX7D_UART4_ROOT_SRC>; + assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>; + status = "okay"; + + rave-sp { + compatible = "zii,rave-sp-rdu2"; + current-speed = <1000000>; + #address-cells = <1>; + #size-cells = <1>; + + watchdog { + compatible = "zii,rave-sp-watchdog"; + }; + + eeprom@a3 { + compatible = "zii,rave-sp-eeprom"; + reg = <0xa3 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + zii,eeprom-name = "main-eeprom"; + }; + }; +}; + +&usbotg2 { + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + bus-width = <4>; + no-1-8-v; + no-sdio; + keep-power-in-suspend; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + bus-width = <8>; + no-1-8-v; + non-removable; + no-sdio; + no-sd; + keep-power-in-suspend; + status = "okay"; +}; + +&wdog1 { + status = "disabled"; +}; + +&iomuxc { + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX7D_PAD_ECSPI1_SCLK__ECSPI1_SCLK 0x2 + MX7D_PAD_ECSPI1_MOSI__ECSPI1_MOSI 0x2 + MX7D_PAD_ECSPI1_MISO__ECSPI1_MISO 0x2 + MX7D_PAD_ECSPI1_SS0__GPIO4_IO19 0x59 + >; + }; + + pinctrl_enet1: enet1grp { + fsl,pins = < + MX7D_PAD_SD2_CD_B__ENET1_MDIO 0x3 + MX7D_PAD_SD2_WP__ENET1_MDC 0x3 + MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC 0x1 + MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x1 + MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x1 + MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2 0x1 + MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3 0x1 + MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x1 + MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC 0x1 + MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x1 + MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x1 + MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 0x1 + MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 0x1 + MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x1 + >; + }; + + pinctrl_enet1_phy_reset: enet1phyresetgrp { + fsl,pins = < + MX7D_PAD_SD2_RESET_B__GPIO5_IO11 0x14 + + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX7D_PAD_I2C1_SDA__I2C1_SDA 0x4000007f + MX7D_PAD_I2C1_SCL__I2C1_SCL 0x4000007f + >; + }; + + pinctrl_leds_debug: ledsgrp { + fsl,pins = < + MX7D_PAD_EPDC_DATA08__GPIO2_IO8 0x59 + >; + }; + + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX7D_PAD_UART2_RX_DATA__UART2_DCE_RX 0x79 + MX7D_PAD_UART2_TX_DATA__UART2_DCE_TX 0x79 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX7D_PAD_SD2_DATA0__UART4_DCE_RX 0x79 + MX7D_PAD_SD2_DATA1__UART4_DCE_TX 0x79 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX7D_PAD_SD1_CMD__SD1_CMD 0x59 + MX7D_PAD_SD1_CLK__SD1_CLK 0x19 + MX7D_PAD_SD1_DATA0__SD1_DATA0 0x59 + MX7D_PAD_SD1_DATA1__SD1_DATA1 0x59 + MX7D_PAD_SD1_DATA2__SD1_DATA2 0x59 + MX7D_PAD_SD1_DATA3__SD1_DATA3 0x59 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX7D_PAD_SD3_CMD__SD3_CMD 0x59 + MX7D_PAD_SD3_CLK__SD3_CLK 0x19 + MX7D_PAD_SD3_DATA0__SD3_DATA0 0x59 + MX7D_PAD_SD3_DATA1__SD3_DATA1 0x59 + MX7D_PAD_SD3_DATA2__SD3_DATA2 0x59 + MX7D_PAD_SD3_DATA3__SD3_DATA3 0x59 + MX7D_PAD_SD3_DATA4__SD3_DATA4 0x59 + MX7D_PAD_SD3_DATA5__SD3_DATA5 0x59 + MX7D_PAD_SD3_DATA6__SD3_DATA6 0x59 + MX7D_PAD_SD3_DATA7__SD3_DATA7 0x59 + MX7D_PAD_SD3_RESET_B__SD3_RESET_B 0x59 + >; + }; +}; + +&iomuxc_lpsr { + pinctrl_enet1_phy_interrupt: enet1phyinterruptgrp { + fsl,phy = < + MX7D_PAD_LPSR_GPIO1_IO02__GPIO1_IO2 0x08 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx7d-zii-rpu2.dts b/arch/arm/boot/dts/imx7d-zii-rpu2.dts index 4a78ddc7513d..39812c92bf0d 100644 --- a/arch/arm/boot/dts/imx7d-zii-rpu2.dts +++ b/arch/arm/boot/dts/imx7d-zii-rpu2.dts @@ -669,10 +669,6 @@ status = "disabled"; }; -&snvs_pwrkey { - status = "disabled"; -}; - &iomuxc { pinctrl_ecspi1: ecspi1grp { fsl,pins = < diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi index 42528d2812a2..92f6d0c2a74f 100644 --- a/arch/arm/boot/dts/imx7d.dtsi +++ b/arch/arm/boot/dts/imx7d.dtsi @@ -12,7 +12,7 @@ clock-frequency = <996000000>; operating-points-v2 = <&cpu0_opp_table>; #cooling-cells = <2>; - nvmem-cells = <&cpu_speed_grade>; + nvmem-cells = <&fuse_grade>; nvmem-cell-names = "speed_grade"; }; @@ -22,6 +22,7 @@ reg = <1>; clock-frequency = <996000000>; operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; cpu-idle-states = <&cpu_sleep_wait>; }; }; @@ -43,7 +44,8 @@ opp-hz = /bits/ 64 <792000000>; opp-microvolt = <1000000>; clock-latency-ns = <150000>; - opp-supported-hw = <0xf>, <0xf>; + opp-supported-hw = <0xd>, <0xf>; + opp-suspend; }; opp-996000000 { @@ -51,6 +53,7 @@ opp-microvolt = <1100000>; clock-latency-ns = <150000>; opp-supported-hw = <0xc>, <0xf>; + opp-suspend; }; opp-1200000000 { @@ -58,6 +61,7 @@ opp-microvolt = <1225000>; clock-latency-ns = <150000>; opp-supported-hw = <0x8>, <0xf>; + opp-suspend; }; }; @@ -147,8 +151,8 @@ <&clks IMX7D_ENET_PHY_REF_ROOT_CLK>; clock-names = "ipg", "ahb", "ptp", "enet_clk_ref", "enet_out"; - fsl,num-tx-queues=<3>; - fsl,num-rx-queues=<3>; + fsl,num-tx-queues = <3>; + fsl,num-rx-queues = <3>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx7s-colibri.dtsi b/arch/arm/boot/dts/imx7s-colibri.dtsi index 1fb1ec5d3d70..6d16e32aed89 100644 --- a/arch/arm/boot/dts/imx7s-colibri.dtsi +++ b/arch/arm/boot/dts/imx7s-colibri.dtsi @@ -49,3 +49,7 @@ reg = <0x80000000 0x10000000>; }; }; + +&gpmi { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi index c1a4fff5ceda..568d7a984aa6 100644 --- a/arch/arm/boot/dts/imx7s.dtsi +++ b/arch/arm/boot/dts/imx7s.dtsi @@ -151,9 +151,8 @@ compatible = "fsl,imx7d-tempmon"; interrupt-parent = <&gpc>; interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; - fsl,tempmon =<&anatop>; - nvmem-cells = <&tempmon_calib>, - <&tempmon_temp_grade>; + fsl,tempmon = <&anatop>; + nvmem-cells = <&tempmon_calib>, <&fuse_grade>; nvmem-cell-names = "calib", "temp_grade"; clocks = <&clks IMX7D_PLL_SYS_MAIN_CLK>; }; @@ -448,7 +447,7 @@ compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt"; reg = <0x302d0000 0x10000>; interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_CLK_DUMMY>, + clocks = <&clks IMX7D_GPT1_ROOT_CLK>, <&clks IMX7D_GPT1_ROOT_CLK>; clock-names = "ipg", "per"; }; @@ -457,7 +456,7 @@ compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt"; reg = <0x302e0000 0x10000>; interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_CLK_DUMMY>, + clocks = <&clks IMX7D_GPT2_ROOT_CLK>, <&clks IMX7D_GPT2_ROOT_CLK>; clock-names = "ipg", "per"; status = "disabled"; @@ -467,7 +466,7 @@ compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt"; reg = <0x302f0000 0x10000>; interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_CLK_DUMMY>, + clocks = <&clks IMX7D_GPT3_ROOT_CLK>, <&clks IMX7D_GPT3_ROOT_CLK>; clock-names = "ipg", "per"; status = "disabled"; @@ -477,7 +476,7 @@ compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt"; reg = <0x30300000 0x10000>; interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_CLK_DUMMY>, + clocks = <&clks IMX7D_GPT4_ROOT_CLK>, <&clks IMX7D_GPT4_ROOT_CLK>; clock-names = "ipg", "per"; status = "disabled"; @@ -548,18 +547,14 @@ reg = <0x3c 0x4>; }; - tempmon_temp_grade: temp-grade@10 { - reg = <0x10 0x4>; - }; - - cpu_speed_grade: speed-grade@10 { + fuse_grade: fuse-grade@10 { reg = <0x10 0x4>; }; }; anatop: anatop@30360000 { compatible = "fsl,imx7d-anatop", "fsl,imx6q-anatop", - "syscon", "simple-bus"; + "syscon", "simple-mfd"; reg = <0x30360000 0x10000>; interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; @@ -658,6 +653,12 @@ reg = <1>; power-supply = <®_1p0d>; }; + + pgc_hsic_phy: power-domain@2 { + #power-domain-cells = <0>; + reg = <2>; + power-supply = <®_1p2>; + }; }; }; }; @@ -1101,6 +1102,7 @@ compatible = "fsl,imx7d-usb", "fsl,imx27-usb"; reg = <0x30b30000 0x200>; interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&pgc_hsic_phy>; clocks = <&clks IMX7D_USB_CTRL_CLK>; fsl,usbphy = <&usbphynop3>; fsl,usbmisc = <&usbmisc3 0>; @@ -1184,8 +1186,8 @@ <&clks IMX7D_ENET_PHY_REF_ROOT_CLK>; clock-names = "ipg", "ahb", "ptp", "enet_clk_ref", "enet_out"; - fsl,num-tx-queues=<3>; - fsl,num-rx-queues=<3>; + fsl,num-tx-queues = <3>; + fsl,num-rx-queues = <3>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/imx7ulp-com.dts b/arch/arm/boot/dts/imx7ulp-com.dts new file mode 100644 index 000000000000..d76fea3b35c6 --- /dev/null +++ b/arch/arm/boot/dts/imx7ulp-com.dts @@ -0,0 +1,79 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright 2019 NXP + +/dts-v1/; + +#include "imx7ulp.dtsi" +#include <dt-bindings/input/input.h> + +/ { + model = "Embedded Artists i.MX7ULP COM"; + compatible = "ea,imx7ulp-com", "fsl,imx7ulp"; + + chosen { + stdout-path = &lpuart4; + }; + + memory@60000000 { + device_type = "memory"; + reg = <0x60000000 0x4000000>; + }; +}; + +&lpuart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart4>; + status = "okay"; +}; + +&usbotg1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1_id>; + srp-disable; + hnp-disable; + adp-disable; + status = "okay"; +}; + +&usdhc0 { + assigned-clocks = <&pcc2 IMX7ULP_CLK_USDHC0>; + assigned-clock-parents = <&scg1 IMX7ULP_CLK_APLL_PFD1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc0>; + non-removable; + bus-width = <8>; + no-1-8-v; + status = "okay"; +}; + +&iomuxc1 { + pinctrl_lpuart4: lpuart4grp { + fsl,pins = < + IMX7ULP_PAD_PTC3__LPUART4_RX 0x3 + IMX7ULP_PAD_PTC2__LPUART4_TX 0x3 + >; + }; + + pinctrl_usbotg1_id: otg1idgrp { + fsl,pins = < + IMX7ULP_PAD_PTC13__USB0_ID 0x10003 + >; + }; + + pinctrl_usdhc0: usdhc0grp { + fsl,pins = < + IMX7ULP_PAD_PTD1__SDHC0_CMD 0x43 + IMX7ULP_PAD_PTD2__SDHC0_CLK 0x10042 + IMX7ULP_PAD_PTD3__SDHC0_D7 0x43 + IMX7ULP_PAD_PTD4__SDHC0_D6 0x43 + IMX7ULP_PAD_PTD5__SDHC0_D5 0x43 + IMX7ULP_PAD_PTD6__SDHC0_D4 0x43 + IMX7ULP_PAD_PTD7__SDHC0_D3 0x43 + IMX7ULP_PAD_PTD8__SDHC0_D2 0x43 + IMX7ULP_PAD_PTD9__SDHC0_D1 0x43 + IMX7ULP_PAD_PTD10__SDHC0_D0 0x43 + IMX7ULP_PAD_PTD11__SDHC0_DQS 0x42 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx7ulp-evk.dts b/arch/arm/boot/dts/imx7ulp-evk.dts index 4245b33bb451..a863a2b337d6 100644 --- a/arch/arm/boot/dts/imx7ulp-evk.dts +++ b/arch/arm/boot/dts/imx7ulp-evk.dts @@ -77,6 +77,8 @@ }; &usdhc0 { + assigned-clocks = <&pcc2 IMX7ULP_CLK_USDHC0>; + assigned-clock-parents = <&scg1 IMX7ULP_CLK_APLL_PFD1>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc0>; cd-gpios = <&gpio_ptc 10 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/imx7ulp.dtsi b/arch/arm/boot/dts/imx7ulp.dtsi index 56907bb4b329..ab91c98f2124 100644 --- a/arch/arm/boot/dts/imx7ulp.dtsi +++ b/arch/arm/boot/dts/imx7ulp.dtsi @@ -37,10 +37,10 @@ #address-cells = <1>; #size-cells = <0>; - cpu0: cpu@0 { + cpu0: cpu@f00 { compatible = "arm,cortex-a7"; device_type = "cpu"; - reg = <0>; + reg = <0xf00>; }; }; @@ -87,13 +87,6 @@ #clock-cells = <0>; }; - mpll: clock-mpll { - compatible = "fixed-clock"; - clock-frequency = <480000000>; - clock-output-names = "mpll"; - #clock-cells = <0>; - }; - ahbbridge0: bus@40000000 { compatible = "simple-bus"; #address-cells = <1>; @@ -101,6 +94,34 @@ reg = <0x40000000 0x800000>; ranges; + edma1: dma-controller@40080000 { + #dma-cells = <2>; + compatible = "fsl,imx7ulp-edma"; + reg = <0x40080000 0x2000>, + <0x40210000 0x1000>; + dma-channels = <32>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "dma", "dmamux0"; + clocks = <&pcc2 IMX7ULP_CLK_DMA1>, + <&pcc2 IMX7ULP_CLK_DMA_MUX1>; + }; + crypto: crypto@40240000 { compatible = "fsl,sec-v4.0"; #address-cells = <1>; @@ -201,12 +222,10 @@ clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>, <&scg1 IMX7ULP_CLK_NIC1_DIV>, <&pcc2 IMX7ULP_CLK_USDHC0>; - clock-names ="ipg", "ahb", "per"; - assigned-clocks = <&pcc2 IMX7ULP_CLK_USDHC0>; - assigned-clock-parents = <&scg1 IMX7ULP_CLK_NIC1_DIV>; + clock-names = "ipg", "ahb", "per"; bus-width = <4>; fsl,tuning-start-tap = <20>; - fsl,tuning-step= <2>; + fsl,tuning-step = <2>; status = "disabled"; }; @@ -217,12 +236,10 @@ clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>, <&scg1 IMX7ULP_CLK_NIC1_DIV>, <&pcc2 IMX7ULP_CLK_USDHC1>; - clock-names ="ipg", "ahb", "per"; - assigned-clocks = <&pcc2 IMX7ULP_CLK_USDHC1>; - assigned-clock-parents = <&scg1 IMX7ULP_CLK_NIC1_DIV>; + clock-names = "ipg", "ahb", "per"; bus-width = <4>; fsl,tuning-start-tap = <20>; - fsl,tuning-step= <2>; + fsl,tuning-step = <2>; status = "disabled"; }; @@ -230,12 +247,22 @@ compatible = "fsl,imx7ulp-scg1"; reg = <0x403e0000 0x10000>; clocks = <&rosc>, <&sosc>, <&sirc>, - <&firc>, <&upll>, <&mpll>; + <&firc>, <&upll>; clock-names = "rosc", "sosc", "sirc", - "firc", "upll", "mpll"; + "firc", "upll"; #clock-cells = <1>; }; + wdog1: watchdog@403d0000 { + compatible = "fsl,imx7ulp-wdt"; + reg = <0x403d0000 0x10000>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pcc2 IMX7ULP_CLK_WDG1>; + assigned-clocks = <&pcc2 IMX7ULP_CLK_WDG1>; + assigned-clocks-parents = <&scg1 IMX7ULP_CLK_FIRC_BUS_CLK>; + timeout-sec = <40>; + }; + pcc2: clock-controller@403f0000 { compatible = "fsl,imx7ulp-pcc2"; reg = <0x403f0000 0x10000>; @@ -248,13 +275,12 @@ <&scg1 IMX7ULP_CLK_APLL_PFD0>, <&scg1 IMX7ULP_CLK_UPLL>, <&scg1 IMX7ULP_CLK_SOSC_BUS_CLK>, - <&scg1 IMX7ULP_CLK_MIPI_PLL>, <&scg1 IMX7ULP_CLK_FIRC_BUS_CLK>, <&scg1 IMX7ULP_CLK_ROSC>, <&scg1 IMX7ULP_CLK_SPLL_BUS_CLK>; clock-names = "nic1_bus_clk", "nic1_clk", "ddr_clk", "apll_pfd2", "apll_pfd1", "apll_pfd0", - "upll", "sosc_bus_clk", "mpll", + "upll", "sosc_bus_clk", "firc_bus_clk", "rosc", "spll_bus_clk"; assigned-clocks = <&pcc2 IMX7ULP_CLK_LPTPM5>; assigned-clock-parents = <&scg1 IMX7ULP_CLK_SOSC_BUS_CLK>; @@ -281,13 +307,12 @@ <&scg1 IMX7ULP_CLK_APLL_PFD0>, <&scg1 IMX7ULP_CLK_UPLL>, <&scg1 IMX7ULP_CLK_SOSC_BUS_CLK>, - <&scg1 IMX7ULP_CLK_MIPI_PLL>, <&scg1 IMX7ULP_CLK_FIRC_BUS_CLK>, <&scg1 IMX7ULP_CLK_ROSC>, <&scg1 IMX7ULP_CLK_SPLL_BUS_CLK>; clock-names = "nic1_bus_clk", "nic1_clk", "ddr_clk", "apll_pfd2", "apll_pfd1", "apll_pfd0", - "upll", "sosc_bus_clk", "mpll", + "upll", "sosc_bus_clk", "firc_bus_clk", "rosc", "spll_bus_clk"; }; }; diff --git a/arch/arm/boot/dts/iwg20d-q7-common.dtsi b/arch/arm/boot/dts/iwg20d-q7-common.dtsi index ae75a1db3d9a..ebbe1518ef8a 100644 --- a/arch/arm/boot/dts/iwg20d-q7-common.dtsi +++ b/arch/arm/boot/dts/iwg20d-q7-common.dtsi @@ -46,6 +46,49 @@ clock-frequency = <26000000>; }; + lcd_backlight: backlight { + compatible = "pwm-backlight"; + + pwms = <&pwm3 0 5000000 0>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <7>; + enable-gpios = <&gpio5 14 GPIO_ACTIVE_HIGH>; + }; + + lvds-receiver { + compatible = "ti,ds90cf384a", "lvds-decoder"; + powerdown-gpios = <&gpio7 25 GPIO_ACTIVE_LOW>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + lvds_receiver_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + port@1 { + reg = <1>; + lvds_receiver_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + }; + + panel { + compatible = "edt,etm0700g0dh6"; + backlight = <&lcd_backlight>; + + port { + panel_in: endpoint { + remote-endpoint = <&lvds_receiver_out>; + }; + }; + }; + reg_1p5v: 1p5v { compatible = "regulator-fixed"; regulator-name = "1P5V"; @@ -89,8 +132,7 @@ gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>; gpios-states = <1>; - states = <3300000 1 - 1800000 0>; + states = <3300000 1>, <1800000 0>; }; }; @@ -120,6 +162,18 @@ status = "okay"; }; +&du { + status = "okay"; +}; + +&gpio2 { + touch-interrupt { + gpio-hog; + gpios = <12 GPIO_ACTIVE_LOW>; + input; + }; +}; + &hsusb { status = "okay"; pinctrl-0 = <&usb0_pins>; @@ -147,6 +201,25 @@ VDDIO-supply = <®_3p3v>; VDDD-supply = <®_1p5v>; }; + + touch: touchpanel@38 { + compatible = "edt,edt-ft5406"; + reg = <0x38>; + interrupt-parent = <&gpio2>; + interrupts = <12 IRQ_TYPE_EDGE_FALLING>; + }; +}; + +&lvds0 { + status = "okay"; + + ports { + port@1 { + lvds0_out: endpoint { + remote-endpoint = <&lvds_receiver_in>; + }; + }; + }; }; &pci0 { @@ -180,6 +253,11 @@ function = "i2c2"; }; + pwm3_pins: pwm3 { + groups = "pwm3"; + function = "pwm3"; + }; + scif0_pins: scif0 { groups = "scif0_data_d"; function = "scif0"; @@ -218,6 +296,12 @@ }; }; +&pwm3 { + pinctrl-0 = <&pwm3_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + &rcar_sound { pinctrl-0 = <&sound_pins>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi b/arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi index 0e99df218252..ede2e0c999b1 100644 --- a/arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi +++ b/arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi @@ -39,7 +39,6 @@ &du { pinctrl-0 = <&du_pins>; pinctrl-names = "default"; - status = "okay"; ports { port@0 { diff --git a/arch/arm/boot/dts/keystone-clocks.dtsi b/arch/arm/boot/dts/keystone-clocks.dtsi index 457515b0736a..0397c3423d2d 100644 --- a/arch/arm/boot/dts/keystone-clocks.dtsi +++ b/arch/arm/boot/dts/keystone-clocks.dtsi @@ -408,4 +408,31 @@ clocks { reg-names = "control", "domain"; domain-id = <0>; }; + + /* + * Below are set of fixed, input clocks definitions, + * for which real frequencies have to be defined in board files. + * Those clocks can be used as reference clocks for some HW modules + * (as cpts, for example) by configuring corresponding clock muxes. + */ + timi0: timi0 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + clock-output-names = "timi0"; + }; + + timi1: timi1 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + clock-output-names = "timi1"; + }; + + tsrefclk: tsrefclk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + clock-output-names = "tsrefclk"; + }; }; diff --git a/arch/arm/boot/dts/keystone-k2e-clocks.dtsi b/arch/arm/boot/dts/keystone-k2e-clocks.dtsi index f7592155a740..cf30e007fea3 100644 --- a/arch/arm/boot/dts/keystone-k2e-clocks.dtsi +++ b/arch/arm/boot/dts/keystone-k2e-clocks.dtsi @@ -71,4 +71,24 @@ clocks { reg-names = "control", "domain"; domain-id = <29>; }; + + /* + * Below are set of fixed, input clocks definitions, + * for which real frequencies have to be defined in board files. + * Those clocks can be used as reference clocks for some HW modules + * (as cpts, for example) by configuring corresponding clock muxes. + */ + tsipclka: tsipclka { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + clock-output-names = "tsipclka"; + }; + + tsipclkb: tsipclkb { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + clock-output-names = "tsipclkb"; + }; }; diff --git a/arch/arm/boot/dts/keystone-k2e-netcp.dtsi b/arch/arm/boot/dts/keystone-k2e-netcp.dtsi index 1db17ec744b1..ad15e77874b1 100644 --- a/arch/arm/boot/dts/keystone-k2e-netcp.dtsi +++ b/arch/arm/boot/dts/keystone-k2e-netcp.dtsi @@ -135,8 +135,8 @@ netcp: netcp@24000000 { /* NetCP address range */ ranges = <0 0x24000000 0x1000000>; - clocks = <&clkpa>, <&clkcpgmac>, <&chipclk12>; - clock-names = "pa_clk", "ethss_clk", "cpts"; + clocks = <&clkpa>, <&clkcpgmac>; + clock-names = "pa_clk", "ethss_clk"; dma-coherent; ti,navigator-dmas = <&dma_gbe 0>, @@ -156,6 +156,23 @@ netcp: netcp@24000000 { tx-queue = <896>; tx-channel = "nettx"; + cpts { + clocks = <&cpts_refclk_mux>; + clock-names = "cpts"; + + cpts_refclk_mux: cpts-refclk-mux { + #clock-cells = <0>; + clocks = <&chipclk12>, <&chipclk13>, + <&timi0>, <&timi1>, + <&tsipclka>, <&tsrefclk>, + <&tsipclkb>; + ti,mux-tbl = <0x0>, <0x1>, <0x2>, + <0x3>, <0x4>, <0x8>, <0xC>; + assigned-clocks = <&cpts_refclk_mux>; + assigned-clock-parents = <&chipclk12>; + }; + }; + interfaces { gbe0: interface-0 { slave-port = <0>; diff --git a/arch/arm/boot/dts/keystone-k2hk-netcp.dtsi b/arch/arm/boot/dts/keystone-k2hk-netcp.dtsi index e203145acbea..d5a6c1f5633c 100644 --- a/arch/arm/boot/dts/keystone-k2hk-netcp.dtsi +++ b/arch/arm/boot/dts/keystone-k2hk-netcp.dtsi @@ -152,8 +152,8 @@ netcp: netcp@2000000 { /* NetCP address range */ ranges = <0 0x2000000 0x100000>; - clocks = <&clkpa>, <&clkcpgmac>, <&chipclk12>; - clock-names = "pa_clk", "ethss_clk", "cpts"; + clocks = <&clkpa>, <&clkcpgmac>; + clock-names = "pa_clk", "ethss_clk"; dma-coherent; ti,navigator-dmas = <&dma_gbe 22>, @@ -175,6 +175,22 @@ netcp: netcp@2000000 { tx-queue = <648>; tx-channel = "nettx"; + cpts { + clocks = <&cpts_refclk_mux>; + clock-names = "cpts"; + + cpts_refclk_mux: cpts-refclk-mux { + #clock-cells = <0>; + clocks = <&chipclk12>, <&chipclk13>, + <&timi0>, <&timi1>, + <&tsrefclk>; + ti,mux-tbl = <0x0>, <0x1>, <0x2>, + <0x3>, <0x8>; + assigned-clocks = <&cpts_refclk_mux>; + assigned-clock-parents = <&chipclk12>; + }; + }; + interfaces { gbe0: interface-0 { slave-port = <0>; diff --git a/arch/arm/boot/dts/keystone-k2l-netcp.dtsi b/arch/arm/boot/dts/keystone-k2l-netcp.dtsi index a2e47bad3307..c1f982604145 100644 --- a/arch/arm/boot/dts/keystone-k2l-netcp.dtsi +++ b/arch/arm/boot/dts/keystone-k2l-netcp.dtsi @@ -134,8 +134,8 @@ netcp: netcp@26000000 { /* NetCP address range */ ranges = <0 0x26000000 0x1000000>; - clocks = <&clkpa>, <&clkcpgmac>, <&chipclk12>; - clock-names = "pa_clk", "ethss_clk", "cpts"; + clocks = <&clkpa>, <&clkcpgmac>; + clock-names = "pa_clk", "ethss_clk"; dma-coherent; ti,navigator-dmas = <&dma_gbe 0>, @@ -155,6 +155,22 @@ netcp: netcp@26000000 { tx-queue = <896>; tx-channel = "nettx"; + cpts { + clocks = <&cpts_refclk_mux>; + clock-names = "cpts"; + + cpts_refclk_mux: cpts-refclk-mux { + #clock-cells = <0>; + clocks = <&chipclk12>, <&chipclk13>, + <&timi0>, <&timi1>, + <&tsrefclk>; + ti,mux-tbl = <0x0>, <0x1>, <0x2>, + <0x3>, <0x8>; + assigned-clocks = <&cpts_refclk_mux>; + assigned-clock-parents = <&chipclk12>; + }; + }; + interfaces { gbe0: interface-0 { slave-port = <0>; diff --git a/arch/arm/boot/dts/kirkwood-synology.dtsi b/arch/arm/boot/dts/kirkwood-synology.dtsi index c97ed29a0a0b..217bd374e52b 100644 --- a/arch/arm/boot/dts/kirkwood-synology.dtsi +++ b/arch/arm/boot/dts/kirkwood-synology.dtsi @@ -244,7 +244,7 @@ rs5c372: rs5c372@32 { status = "disabled"; - compatible = "ricoh,rs5c372"; + compatible = "ricoh,rs5c372a"; reg = <0x32>; }; diff --git a/arch/arm/boot/dts/kirkwood-ts219.dtsi b/arch/arm/boot/dts/kirkwood-ts219.dtsi index a88eb22070a1..994cabcf4b51 100644 --- a/arch/arm/boot/dts/kirkwood-ts219.dtsi +++ b/arch/arm/boot/dts/kirkwood-ts219.dtsi @@ -104,3 +104,11 @@ &pcie0 { status = "okay"; }; + +&rtc { + /* + * There is a s35390a available on the i2c bus, the internal rtc isn't + * working (probably no crystal assembled). + */ + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts b/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts index f7a841a28865..2a0a98fe67f0 100644 --- a/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts +++ b/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts @@ -9,5 +9,5 @@ / { model = "LogicPD Zoom OMAP35xx SOM-LV Development Kit"; - compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap3"; + compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap3430", "ti,omap3"; }; diff --git a/arch/arm/boot/dts/logicpd-som-lv.dtsi b/arch/arm/boot/dts/logicpd-som-lv.dtsi index 5563ee54c960..b56524cc7fe2 100644 --- a/arch/arm/boot/dts/logicpd-som-lv.dtsi +++ b/arch/arm/boot/dts/logicpd-som-lv.dtsi @@ -228,6 +228,20 @@ >; }; + i2c2_pins: pinmux_i2c2_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT | MUX_MODE0) /* i2c2_scl */ + OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT | MUX_MODE0) /* i2c2_sda */ + >; + }; + + i2c3_pins: pinmux_i2c3_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0) /* i2c3_scl */ + OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0) /* i2c3_sda */ + >; + }; + tsc2004_pins: pinmux_tsc2004_pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE4) /* mcbsp4_dr.gpio_153 */ @@ -249,18 +263,6 @@ OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE4) /* sys_boot1.gpio_3 */ >; }; - i2c2_pins: pinmux_i2c2_pins { - pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT | MUX_MODE0) /* i2c2_scl */ - OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT | MUX_MODE0) /* i2c2_sda */ - >; - }; - i2c3_pins: pinmux_i2c3_pins { - pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0) /* i2c3_scl */ - OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0) /* i2c3_sda */ - >; - }; }; &omap3_pmx_core2 { diff --git a/arch/arm/boot/dts/logicpd-torpedo-35xx-devkit.dts b/arch/arm/boot/dts/logicpd-torpedo-35xx-devkit.dts index 7675bc3fa868..57bae2aa910e 100644 --- a/arch/arm/boot/dts/logicpd-torpedo-35xx-devkit.dts +++ b/arch/arm/boot/dts/logicpd-torpedo-35xx-devkit.dts @@ -9,5 +9,5 @@ / { model = "LogicPD Zoom OMAP35xx Torpedo Development Kit"; - compatible = "logicpd,dm3730-torpedo-devkit", "ti,omap3"; + compatible = "logicpd,dm3730-torpedo-devkit", "ti,omap3430", "ti,omap3"; }; diff --git a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit-28.dts b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit-28.dts index 07ac99b9cda6..b5536132971f 100644 --- a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit-28.dts +++ b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit-28.dts @@ -11,22 +11,5 @@ #include "logicpd-torpedo-37xx-devkit.dts" &lcd0 { - - label = "28"; - - panel-timing { - clock-frequency = <9000000>; - hactive = <480>; - vactive = <272>; - hfront-porch = <3>; - hback-porch = <2>; - hsync-len = <42>; - vback-porch = <3>; - vfront-porch = <2>; - vsync-len = <11>; - hsync-active = <1>; - vsync-active = <1>; - de-active = <1>; - pixelclk-active = <0>; - }; + compatible = "logicpd,type28"; }; diff --git a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts index 18c27e85051f..5532db04046c 100644 --- a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts +++ b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts @@ -50,6 +50,20 @@ }; }; +&uart2 { + /delete-property/dma-names; + bluetooth { + compatible = "ti,wl1283-st"; + enable-gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>; /* gpio 162 */ + max-speed = <3000000>; + }; +}; + +/* The DM3730 has a faster L3 than OMAP35, so increase pixel clock */ +&mt9p031_out { + pixel-clock-frequency = <90000000>; +}; + &omap3_pmx_core { mmc3_pins: pinmux_mm3_pins { pinctrl-single,pins = < diff --git a/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi b/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi index 642e809e757a..f7b82ced4080 100644 --- a/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi +++ b/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi @@ -101,6 +101,12 @@ }; }; +&hdqw1w { + pinctrl-names = "default"; + pinctrl-0 = <&hdq_pins>; +}; + + &vpll2 { regulator-always-on; }; @@ -108,7 +114,7 @@ &dss { status = "ok"; vdds_dsi-supply = <&vpll2>; - vdda_video-supply = <&video_reg>; + vdda_video-supply = <&vpll2>; pinctrl-names = "default"; pinctrl-0 = <&dss_dpi_pins1>; port { @@ -124,44 +130,19 @@ display0 = &lcd0; }; - video_reg: video_reg { - pinctrl-names = "default"; - pinctrl-0 = <&panel_pwr_pins>; - compatible = "regulator-fixed"; - regulator-name = "fixed-supply"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio5 27 GPIO_ACTIVE_HIGH>; /* gpio155, lcd INI */ - }; - lcd0: display { - compatible = "panel-dpi"; + /* This isn't the exact LCD, but the timings meet spec */ + compatible = "newhaven,nhd-4.3-480272ef-atxl"; label = "15"; - status = "okay"; - /* default-on; */ pinctrl-names = "default"; - + pinctrl-0 = <&panel_pwr_pins>; + backlight = <&bl>; + enable-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>; port { lcd_in: endpoint { remote-endpoint = <&dpi_out>; }; }; - - panel-timing { - clock-frequency = <9000000>; - hactive = <480>; - vactive = <272>; - hfront-porch = <3>; - hback-porch = <2>; - hsync-len = <42>; - vback-porch = <3>; - vfront-porch = <4>; - vsync-len = <11>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; }; bl: backlight { @@ -193,6 +174,12 @@ >; }; + hdq_pins: hdq_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21c6, PIN_INPUT_PULLUP | MUX_MODE0) /* hdq_sio */ + >; + }; + pwm_pins: pinmux_pwm_pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x20B8, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* gpmc_ncs5.gpt_10_pwm_evt */ diff --git a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi index 3fdd0a72f87f..3a5228562b0d 100644 --- a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi +++ b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi @@ -35,6 +35,11 @@ }; }; +/* The Torpedo doesn't route the USB host pins */ +&usbhshost { + status = "disabled"; +}; + &gpmc { ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */ @@ -192,3 +197,7 @@ &twl_gpio { ti,use-leds; }; + +&twl_keypad { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/ls1021a-tsn.dts b/arch/arm/boot/dts/ls1021a-tsn.dts index 5b7689094b70..9d8f0c2a8aba 100644 --- a/arch/arm/boot/dts/ls1021a-tsn.dts +++ b/arch/arm/boot/dts/ls1021a-tsn.dts @@ -203,11 +203,15 @@ /* AR8031 */ sgmii_phy1: ethernet-phy@1 { reg = <0x1>; + /* SGMII1_PHY_INT_B: connected to IRQ2, active low */ + interrupts-extended = <&extirq 2 IRQ_TYPE_LEVEL_LOW>; }; /* AR8031 */ sgmii_phy2: ethernet-phy@2 { reg = <0x2>; + /* SGMII2_PHY_INT_B: connected to IRQ2, active low */ + interrupts-extended = <&extirq 2 IRQ_TYPE_LEVEL_LOW>; }; /* BCM5464 quad PHY */ diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi index 464df4290ffc..0855b1fe98e0 100644 --- a/arch/arm/boot/dts/ls1021a.dtsi +++ b/arch/arm/boot/dts/ls1021a.dtsi @@ -216,6 +216,25 @@ compatible = "fsl,ls1021a-scfg", "syscon"; reg = <0x0 0x1570000 0x0 0x10000>; big-endian; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x1570000 0x10000>; + + extirq: interrupt-controller@1ac { + compatible = "fsl,ls1021a-extirq"; + #interrupt-cells = <2>; + #address-cells = <0>; + interrupt-controller; + reg = <0x1ac 4>; + interrupt-map = + <0 0 &gic GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>, + <1 0 &gic GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>, + <2 0 &gic GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>, + <3 0 &gic GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>, + <4 0 &gic GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, + <5 0 &gic GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map-mask = <0xffffffff 0x0>; + }; }; crypto: crypto@1700000 { @@ -874,7 +893,6 @@ #address-cells = <3>; #size-cells = <2>; device_type = "pci"; - num-lanes = <4>; num-viewport = <6>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000 /* downstream I/O */ @@ -899,7 +917,6 @@ #address-cells = <3>; #size-cells = <2>; device_type = "pci"; - num-lanes = <4>; num-viewport = <6>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000 /* downstream I/O */ diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi index c4447f6c8b2c..5d198309058a 100644 --- a/arch/arm/boot/dts/meson.dtsi +++ b/arch/arm/boot/dts/meson.dtsi @@ -282,4 +282,11 @@ }; }; }; + + xtal: xtal-clk { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "xtal"; + #clock-cells = <0>; + }; }; /* end of / */ diff --git a/arch/arm/boot/dts/meson6.dtsi b/arch/arm/boot/dts/meson6.dtsi index 2d31b7ce3f8c..4716030a48d0 100644 --- a/arch/arm/boot/dts/meson6.dtsi +++ b/arch/arm/boot/dts/meson6.dtsi @@ -36,13 +36,6 @@ ranges = <0x0 0xd0000000 0x40000>; }; - xtal: xtal-clk { - compatible = "fixed-clock"; - clock-frequency = <24000000>; - clock-output-names = "xtal"; - #clock-cells = <0>; - }; - clk81: clk@0 { #clock-cells = <0>; compatible = "fixed-clock"; diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi index 5a7e3e5caebe..eedb92526968 100644 --- a/arch/arm/boot/dts/meson8.dtsi +++ b/arch/arm/boot/dts/meson8.dtsi @@ -3,6 +3,7 @@ * Copyright 2014 Carlo Caione <carlo@caione.org> */ +#include <dt-bindings/clock/meson8-ddr-clkc.h> #include <dt-bindings/clock/meson8b-clkc.h> #include <dt-bindings/gpio/meson8-gpio.h> #include <dt-bindings/reset/amlogic,meson8b-clkc-reset.h> @@ -129,8 +130,8 @@ gpu_opp_table: gpu-opp-table { compatible = "operating-points-v2"; - opp-182150000 { - opp-hz = /bits/ 64 <182150000>; + opp-182142857 { + opp-hz = /bits/ 64 <182142857>; opp-microvolt = <1150000>; }; opp-318750000 { @@ -195,6 +196,14 @@ #size-cells = <1>; ranges = <0x0 0xc8000000 0x8000>; + ddr_clkc: clock-controller@400 { + compatible = "amlogic,meson8-ddr-clkc"; + reg = <0x400 0x20>; + clocks = <&xtal>; + clock-names = "xtal"; + #clock-cells = <1>; + }; + dmcbus: bus@6000 { compatible = "simple-bus"; reg = <0x6000 0x400>; @@ -253,7 +262,7 @@ &aobus { pmu: pmu@e0 { compatible = "amlogic,meson8-pmu", "syscon"; - reg = <0xe0 0x8>; + reg = <0xe0 0x18>; }; pinctrl_aobus: pinctrl@84 { @@ -455,6 +464,8 @@ &hhi { clkc: clock-controller { compatible = "amlogic,meson8-clkc"; + clocks = <&xtal>, <&ddr_clkc DDR_CLKID_DDR_PLL>; + clock-names = "xtal", "ddr_pll"; #clock-cells = <1>; #reset-cells = <1>; }; @@ -529,8 +540,7 @@ &saradc { compatible = "amlogic,meson8-saradc", "amlogic,meson-saradc"; - clocks = <&clkc CLKID_XTAL>, - <&clkc CLKID_SAR_ADC>; + clocks = <&xtal>, <&clkc CLKID_SAR_ADC>; clock-names = "clkin", "core"; amlogic,hhi-sysctrl = <&hhi>; nvmem-cells = <&temperature_calib>; @@ -548,31 +558,31 @@ }; &timer_abcde { - clocks = <&clkc CLKID_XTAL>, <&clkc CLKID_CLK81>; + clocks = <&xtal>, <&clkc CLKID_CLK81>; clock-names = "xtal", "pclk"; }; &uart_AO { compatible = "amlogic,meson8-uart", "amlogic,meson-uart"; - clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_XTAL>, <&clkc CLKID_CLK81>; + clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_CLK81>; clock-names = "baud", "xtal", "pclk"; }; &uart_A { compatible = "amlogic,meson8-uart", "amlogic,meson-uart"; - clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_XTAL>, <&clkc CLKID_UART0>; + clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART0>; clock-names = "baud", "xtal", "pclk"; }; &uart_B { compatible = "amlogic,meson8-uart", "amlogic,meson-uart"; - clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_XTAL>, <&clkc CLKID_UART1>; + clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART1>; clock-names = "baud", "xtal", "pclk"; }; &uart_C { compatible = "amlogic,meson8-uart", "amlogic,meson-uart"; - clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_XTAL>, <&clkc CLKID_UART2>; + clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART2>; clock-names = "baud", "xtal", "pclk"; }; diff --git a/arch/arm/boot/dts/meson8b-ec100.dts b/arch/arm/boot/dts/meson8b-ec100.dts index 96d239d8334e..163a200d5a7b 100644 --- a/arch/arm/boot/dts/meson8b-ec100.dts +++ b/arch/arm/boot/dts/meson8b-ec100.dts @@ -219,6 +219,27 @@ */ vin-supply = <&vcc_3v3>; }; + + vddee: regulator-vddee { + /* + * Silergy SY8089AAC-GP 2A continuous, 3A peak, 1MHz + * Synchronous Step Down Regulator. Also called VDDAO + * in a part of the schematics. + */ + compatible = "pwm-regulator"; + + regulator-name = "VDDEE"; + regulator-min-microvolt = <860000>; + regulator-max-microvolt = <1140000>; + + vin-supply = <&vcc_5v>; + + pwms = <&pwm_cd 1 1148 0>; + pwm-dutycycle-range = <100 0>; + + regulator-boot-on; + regulator-always-on; + }; }; &cpu0 { @@ -269,6 +290,10 @@ }; }; +&mali { + mali-supply = <&vddee>; +}; + &saradc { status = "okay"; vref-supply = <&vcc_1v8>; @@ -350,10 +375,10 @@ &pwm_cd { status = "okay"; - pinctrl-0 = <&pwm_c1_pins>; + pinctrl-0 = <&pwm_c1_pins>, <&pwm_d_pins>; pinctrl-names = "default"; - clocks = <&clkc CLKID_XTAL>; - clock-names = "clkin0"; + clocks = <&xtal>, <&xtal>; + clock-names = "clkin0", "clkin1"; }; &rtc { diff --git a/arch/arm/boot/dts/meson8b-mxq.dts b/arch/arm/boot/dts/meson8b-mxq.dts index bb27b34eb346..33037ef62d0a 100644 --- a/arch/arm/boot/dts/meson8b-mxq.dts +++ b/arch/arm/boot/dts/meson8b-mxq.dts @@ -76,6 +76,22 @@ regulator-boot-on; regulator-always-on; }; + + vddee: regulator-vddee { + compatible = "pwm-regulator"; + + regulator-name = "VDDEE"; + regulator-min-microvolt = <860000>; + regulator-max-microvolt = <1140000>; + + vin-supply = <&vcc_5v>; + + pwms = <&pwm_cd 1 1148 0>; + pwm-dutycycle-range = <100 0>; + + regulator-boot-on; + regulator-always-on; + }; }; &cpu0 { @@ -112,6 +128,10 @@ }; }; +&mali { + mali-supply = <&vddee>; +}; + &saradc { status = "okay"; vref-supply = <&vcc_1v8>; @@ -143,10 +163,10 @@ &pwm_cd { status = "okay"; - pinctrl-0 = <&pwm_c1_pins>; + pinctrl-0 = <&pwm_c1_pins>, <&pwm_d_pins>; pinctrl-names = "default"; - clocks = <&clkc CLKID_XTAL>; - clock-names = "clkin0"; + clocks = <&xtal>, <&xtal>; + clock-names = "clkin0", "clkin1"; }; &uart_AO { diff --git a/arch/arm/boot/dts/meson8b-odroidc1.dts b/arch/arm/boot/dts/meson8b-odroidc1.dts index 86c4614e0a38..a2a47804fc4a 100644 --- a/arch/arm/boot/dts/meson8b-odroidc1.dts +++ b/arch/arm/boot/dts/meson8b-odroidc1.dts @@ -154,6 +154,23 @@ vin-supply = <&p5v0>; }; + vddee: regulator-vddee { + /* Monolithic Power Systems MP2161 */ + compatible = "pwm-regulator"; + + regulator-name = "VDDEE"; + regulator-min-microvolt = <860000>; + regulator-max-microvolt = <1140000>; + + vin-supply = <&p5v0>; + + pwms = <&pwm_cd 1 12218 0>; + pwm-dutycycle-range = <91 0>; + + regulator-boot-on; + regulator-always-on; + }; + vdd_rtc: regulator-vdd-rtc { /* * Torex Semiconductor XC6215 configured for a fixed output of @@ -173,6 +190,12 @@ cpu-supply = <&vcck>; }; +&efuse { + ethernet_mac_address: mac@1b4 { + reg = <0x1b4 0x6>; + }; +}; + ðmac { status = "okay"; @@ -183,6 +206,9 @@ phy-handle = <ð_phy>; amlogic,tx-delay-ns = <4>; + nvmem-cells = <ðernet_mac_address>; + nvmem-cell-names = "mac-address"; + mdio { compatible = "snps,dwmac-mdio"; #address-cells = <1>; @@ -276,6 +302,10 @@ pinctrl-names = "default"; }; +&mali { + mali-supply = <&vddee>; +}; + &saradc { status = "okay"; vref-supply = <&vcc_1v8>; @@ -308,10 +338,10 @@ &pwm_cd { status = "okay"; - pinctrl-0 = <&pwm_c1_pins>; + pinctrl-0 = <&pwm_c1_pins>, <&pwm_d_pins>; pinctrl-names = "default"; - clocks = <&clkc CLKID_XTAL>; - clock-names = "clkin0"; + clocks = <&xtal>, <&xtal>; + clock-names = "clkin0", "clkin1"; }; &rtc { diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi index fba2c70c2fda..e34b039b9357 100644 --- a/arch/arm/boot/dts/meson8b.dtsi +++ b/arch/arm/boot/dts/meson8b.dtsi @@ -4,6 +4,7 @@ * Author: Carlo Caione <carlo@endlessm.com> */ +#include <dt-bindings/clock/meson8-ddr-clkc.h> #include <dt-bindings/clock/meson8b-clkc.h> #include <dt-bindings/gpio/meson8b-gpio.h> #include <dt-bindings/reset/amlogic,meson8b-reset.h> @@ -125,8 +126,8 @@ opp-hz = /bits/ 64 <255000000>; opp-microvolt = <1100000>; }; - opp-364300000 { - opp-hz = /bits/ 64 <364300000>; + opp-364285714 { + opp-hz = /bits/ 64 <364285714>; opp-microvolt = <1100000>; }; opp-425000000 { @@ -172,6 +173,14 @@ #size-cells = <1>; ranges = <0x0 0xc8000000 0x8000>; + ddr_clkc: clock-controller@400 { + compatible = "amlogic,meson8b-ddr-clkc"; + reg = <0x400 0x20>; + clocks = <&xtal>; + clock-names = "xtal"; + #clock-cells = <1>; + }; + dmcbus: bus@6000 { compatible = "simple-bus"; reg = <0x6000 0x400>; @@ -361,6 +370,14 @@ }; }; + pwm_d_pins: pwm-d { + mux { + groups = "pwm_d"; + function = "pwm_d"; + bias-disable; + }; + }; + uart_b0_pins: uart-b0 { mux { groups = "uart_tx_b0", @@ -410,6 +427,8 @@ <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL2>; clock-names = "stmmaceth", "clkin0", "clkin1"; + rx-fifo-depth = <4096>; + tx-fifo-depth = <2048>; resets = <&reset RESET_ETHERNET>; reset-names = "stmmaceth"; @@ -423,7 +442,9 @@ &hhi { clkc: clock-controller { - compatible = "amlogic,meson8-clkc"; + compatible = "amlogic,meson8b-clkc"; + clocks = <&xtal>, <&ddr_clkc DDR_CLKID_DDR_PLL>; + clock-names = "xtal", "ddr_pll"; #clock-cells = <1>; #reset-cells = <1>; }; @@ -498,8 +519,7 @@ &saradc { compatible = "amlogic,meson8b-saradc", "amlogic,meson-saradc"; - clocks = <&clkc CLKID_XTAL>, - <&clkc CLKID_SAR_ADC>; + clocks = <&xtal>, <&clkc CLKID_SAR_ADC>; clock-names = "clkin", "core"; amlogic,hhi-sysctrl = <&hhi>; nvmem-cells = <&temperature_calib>; @@ -513,31 +533,31 @@ }; &timer_abcde { - clocks = <&clkc CLKID_XTAL>, <&clkc CLKID_CLK81>; + clocks = <&xtal>, <&clkc CLKID_CLK81>; clock-names = "xtal", "pclk"; }; &uart_AO { compatible = "amlogic,meson8b-uart", "amlogic,meson-uart"; - clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_XTAL>, <&clkc CLKID_CLK81>; + clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_CLK81>; clock-names = "baud", "xtal", "pclk"; }; &uart_A { compatible = "amlogic,meson8b-uart", "amlogic,meson-uart"; - clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_XTAL>, <&clkc CLKID_UART0>; + clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART0>; clock-names = "baud", "xtal", "pclk"; }; &uart_B { compatible = "amlogic,meson8b-uart", "amlogic,meson-uart"; - clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_XTAL>, <&clkc CLKID_UART1>; + clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART1>; clock-names = "baud", "xtal", "pclk"; }; &uart_C { compatible = "amlogic,meson8b-uart", "amlogic,meson-uart"; - clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_XTAL>, <&clkc CLKID_UART2>; + clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART2>; clock-names = "baud", "xtal", "pclk"; }; diff --git a/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts b/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts new file mode 100644 index 000000000000..6cfa0d4a1884 --- /dev/null +++ b/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts @@ -0,0 +1,244 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * OLPC XO 1.75 Laptop. + * + * Copyright (C) 2018,2019 Lubomir Rintel <lkundrak@v3.sk> + */ + +/dts-v1/; +#include "mmp2.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + model = "OLPC XO-1.75"; + compatible = "olpc,xo-1.75", "mrvl,mmp2"; + + chosen { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + framebuffer@1fc00000 { + compatible = "simple-framebuffer"; + reg = <0x1fc00000 (1200 * 900 * 2)>; + width = <1200>; + height = <900>; + stride = <(1200 * 2)>; + format = "r5g6b5"; + clocks = <&soc_clocks MMP2_CLK_DISP0_LCDC>, + <&soc_clocks MMP2_CLK_DISP0>; + }; + }; + + memory { + linux,usable-memory = <0x0 0x1f800000>; + available = <0xcf000 0x1ef31000 0x1000 0xbf000>; + reg = <0x0 0x20000000>; + device_type = "memory"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + lid { + label = "Lid"; + gpios = <&gpio 129 GPIO_ACTIVE_LOW>; + linux,input-type = <EV_SW>; + linux,code = <SW_LID>; + wakeup-source; + }; + + tablet_mode { + label = "E-Book Mode"; + gpios = <&gpio 128 GPIO_ACTIVE_LOW>; + linux,input-type = <EV_SW>; + linux,code = <SW_TABLET_MODE>; + wakeup-source; + }; + + microphone_insert { + label = "Microphone Plug"; + gpios = <&gpio 96 GPIO_ACTIVE_HIGH>; + linux,input-type = <EV_SW>; + linux,code = <SW_MICROPHONE_INSERT>; + debounce-interval = <100>; + wakeup-source; + }; + + headphone_insert { + label = "Headphone Plug"; + gpios = <&gpio 97 GPIO_ACTIVE_HIGH>; + linux,input-type = <EV_SW>; + linux,code = <SW_HEADPHONE_INSERT>; + debounce-interval = <100>; + wakeup-source; + }; + }; + + camera_i2c { + compatible = "i2c-gpio"; + gpios = <&gpio 109 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>, + <&gpio 108 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + #address-cells = <1>; + #size-cells = <0>; + i2c-gpio,timeout-ms = <1000>; + status = "okay"; + + camera@21 { + compatible = "ovti,ov7670"; + reg = <0x21>; + reset-gpios = <&gpio 102 GPIO_ACTIVE_LOW>; + powerdown-gpios = <&gpio 150 GPIO_ACTIVE_LOW>; + clocks = <&camera0>; + clock-names = "xclk"; + + port { + ov7670_0: endpoint { + hsync-active = <1>; + vsync-active = <1>; + remote-endpoint = <&camera0_0>; + }; + }; + }; + }; + + battery { + compatible = "olpc,xo1.5-battery", "olpc,xo1-battery"; + }; + + wlan_reg: fixedregulator0 { + compatible = "regulator-fixed"; + regulator-name = "wlan"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio 34 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + wlan_pwrseq: pwrseq0 { + compatible = "mmc-pwrseq-sd8787"; + powerdown-gpios = <&gpio 57 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio 58 GPIO_ACTIVE_HIGH>; + }; + + soc { + axi@d4200000 { + ap-sp@d4290000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "olpc,ap-sp"; + interrupts = <40>; + reg = <0xd4290000 0x1000>; + data-gpios = <&gpio 72 GPIO_ACTIVE_HIGH>; + clk-gpios = <&gpio 71 GPIO_ACTIVE_HIGH>; + status = "okay"; + }; + }; + }; +}; + +&uart3 { + status = "okay"; +}; + +&uart4 { + status = "okay"; +}; + +&rtc { + status = "okay"; +}; + +&usb_phy0 { + status = "okay"; +}; + +&usb_otg0 { + status = "okay"; +}; + +&mmc1 { + clock-frequency = <50000000>; + no-1-8-v; + mrvl,clk-delay-cycles = <31>; + broken-cd; + status = "okay"; +}; + +&mmc2 { + clock-frequency = <50000000>; + no-1-8-v; + bus-width = <4>; + non-removable; + broken-cd; + wakeup-source; + keep-power-in-suspend; + mmc-pwrseq = <&wlan_pwrseq>; + vmmc-supply = <&wlan_reg>; + status = "okay"; +}; + +&mmc3 { + clock-frequency = <50000000>; + no-1-8-v; + bus-width = <8>; + non-removable; + broken-cd; + mrvl,clk-delay-cycles = <31>; + status = "okay"; +}; + +&twsi1 { + status = "okay"; + + audio-codec@1a { + compatible = "realtek,alc5631"; + reg = <0x1a>; + status = "okay"; + }; +}; + +&twsi2 { + status = "okay"; + + rtc@68 { + compatible = "dallas,ds1338"; + reg = <0x68>; + status = "okay"; + }; +}; + +&twsi6 { + status = "okay"; + + accelerometer@1d { + compatible = "st,lis331dlh", "st,lis3lv02d"; + reg = <0x1d>; + status = "okay"; + }; +}; + +&ssp3 { + #address-cells = <0>; + spi-slave; + status = "okay"; + ready-gpio = <&gpio 125 GPIO_ACTIVE_HIGH>; + + slave { + compatible = "olpc,xo1.75-ec"; + spi-cpha; + cmd-gpio = <&gpio 155 GPIO_ACTIVE_HIGH>; + }; +}; + +&camera0 { + status = "okay"; + + port { + camera0_0: endpoint { + remote-endpoint = <&ov7670_0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/mmp2.dtsi b/arch/arm/boot/dts/mmp2.dtsi index b6f40743e07b..6a2f072c1d0a 100644 --- a/arch/arm/boot/dts/mmp2.dtsi +++ b/arch/arm/boot/dts/mmp2.dtsi @@ -117,7 +117,7 @@ mrvl,intc-nr-irqs = <2>; }; - usb_otg_phy0: usb-otg-phy@d4207000 { + usb_phy0: usb-phy@d4207000 { compatible = "marvell,mmp2-usb-phy"; reg = <0xd4207000 0x40>; #phy-cells = <0>; @@ -130,7 +130,7 @@ interrupts = <44>; clocks = <&soc_clocks MMP2_CLK_USB>; clock-names = "USBCLK"; - phys = <&usb_otg_phy0>; + phys = <&usb_phy0>; phy-names = "usb"; status = "disabled"; }; @@ -170,6 +170,28 @@ interrupts = <54>; status = "disabled"; }; + + camera0: camera@d420a000 { + compatible = "marvell,mmp2-ccic"; + reg = <0xd420a000 0x800>; + interrupts = <42>; + clocks = <&soc_clocks MMP2_CLK_CCIC0>; + clock-names = "axi"; + #clock-cells = <0>; + clock-output-names = "mclk"; + status = "disabled"; + }; + + camera1: camera@d420a800 { + compatible = "marvell,mmp2-ccic"; + reg = <0xd420a800 0x800>; + interrupts = <30>; + clocks = <&soc_clocks MMP2_CLK_CCIC1>; + clock-names = "axi"; + #clock-cells = <0>; + clock-output-names = "mclk"; + status = "disabled"; + }; }; apb@d4000000 { /* APB */ @@ -192,6 +214,7 @@ interrupts = <27>; clocks = <&soc_clocks MMP2_CLK_UART0>; resets = <&soc_clocks MMP2_CLK_UART0>; + reg-shift = <2>; status = "disabled"; }; @@ -201,6 +224,7 @@ interrupts = <28>; clocks = <&soc_clocks MMP2_CLK_UART1>; resets = <&soc_clocks MMP2_CLK_UART1>; + reg-shift = <2>; status = "disabled"; }; @@ -210,6 +234,7 @@ interrupts = <24>; clocks = <&soc_clocks MMP2_CLK_UART2>; resets = <&soc_clocks MMP2_CLK_UART2>; + reg-shift = <2>; status = "disabled"; }; @@ -219,6 +244,7 @@ interrupts = <46>; clocks = <&soc_clocks MMP2_CLK_UART3>; resets = <&soc_clocks MMP2_CLK_UART3>; + reg-shift = <2>; status = "disabled"; }; @@ -346,40 +372,48 @@ status = "disabled"; }; - ssp1: ssp@d4035000 { + ssp1: spi@d4035000 { compatible = "marvell,mmp2-ssp"; reg = <0xd4035000 0x1000>; clocks = <&soc_clocks MMP2_CLK_SSP0>; interrupts = <0>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; - ssp2: ssp@d4036000 { + ssp2: spi@d4036000 { compatible = "marvell,mmp2-ssp"; reg = <0xd4036000 0x1000>; clocks = <&soc_clocks MMP2_CLK_SSP1>; interrupts = <1>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; - ssp3: ssp@d4037000 { + ssp3: spi@d4037000 { compatible = "marvell,mmp2-ssp"; reg = <0xd4037000 0x1000>; clocks = <&soc_clocks MMP2_CLK_SSP2>; interrupts = <20>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; - ssp4: ssp@d4039000 { + ssp4: spi@d4039000 { compatible = "marvell,mmp2-ssp"; reg = <0xd4039000 0x1000>; clocks = <&soc_clocks MMP2_CLK_SSP3>; interrupts = <21>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; }; - soc_clocks: clocks{ + soc_clocks: clocks { compatible = "marvell,mmp2-clock"; reg = <0xd4050000 0x1000>, <0xd4282800 0x400>, diff --git a/arch/arm/boot/dts/mmp3-dell-ariel.dts b/arch/arm/boot/dts/mmp3-dell-ariel.dts new file mode 100644 index 000000000000..15449c72c042 --- /dev/null +++ b/arch/arm/boot/dts/mmp3-dell-ariel.dts @@ -0,0 +1,116 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Dell Wyse 3020 a.k.a. "Ariel" a.k.a. Tx0D (T00D, T10D) + * + * Copyright (C) 2019 Lubomir Rintel <lkundrak@v3.sk> + */ + +/dts-v1/; +#include "mmp3.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + model = "Dell Ariel"; + compatible = "dell,wyse-ariel", "marvell,mmp3"; + + aliases { + serial2 = &uart3; + }; + + chosen { + #address-cells = <0x1>; + #size-cells = <0x1>; + ranges; + bootargs = "earlyprintk=ttyS2,115200 console=ttyS2,115200"; + }; + + memory@0 { + linux,usable-memory = <0x0 0x7f600000>; + available = <0x7f700000 0x7ff00000 0x00000000 0x7f600000>; + reg = <0x0 0x80000000>; + device_type = "memory"; + }; +}; + +&uart3 { + status = "okay"; +}; + +&rtc { + status = "okay"; +}; + +&usb_otg0 { + status = "okay"; +}; + +&usb_otg_phy0 { + status = "okay"; +}; + +&hsic0 { + status = "okay"; + + usb1@1 { + compatible = "usb424,2640"; + reg = <0x01>; + #address-cells = <0x01>; + #size-cells = <0x00>; + + mass-storage@1 { + compatible = "usb424,4040"; + reg = <0x01>; + status = "disabled"; + }; + }; +}; + +&hsic_phy0 { + status = "okay"; + reset-gpios = <&gpio 63 GPIO_ACTIVE_HIGH>; +}; + +&mmc3 { + status = "okay"; + max-frequency = <50000000>; + status = "okay"; + bus-width = <8>; + non-removable; + cap-mmc-highspeed; +}; + +&twsi1 { + status = "okay"; + + rtc@68 { + compatible = "dallas,ds1338"; + reg = <0x68>; + status = "okay"; + }; +}; + +&twsi3 { + status = "okay"; +}; + +&twsi4 { + status = "okay"; +}; + +&ssp3 { + status = "okay"; + cs-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>; + + firmware-flash@0 { + compatible = "st,m25p80", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <40000000>; + m25p,fast-read; + }; +}; + +&ssp4 { + cs-gpios = <&gpio 56 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/mmp3.dtsi b/arch/arm/boot/dts/mmp3.dtsi new file mode 100644 index 000000000000..59a108e49b41 --- /dev/null +++ b/arch/arm/boot/dts/mmp3.dtsi @@ -0,0 +1,571 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Copyright (C) 2019 Lubomir Rintel <lkundrak@v3.sk> + */ + +#include <dt-bindings/clock/marvell,mmp2.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + enable-method = "marvell,mmp3-smp"; + + cpu@0 { + compatible = "marvell,pj4b"; + device_type = "cpu"; + next-level-cache = <&l2>; + reg = <0>; + }; + + cpu@1 { + compatible = "marvell,pj4b"; + device_type = "cpu"; + next-level-cache = <&l2>; + reg = <1>; + }; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + interrupt-parent = <&gic>; + ranges; + + axi@d4200000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0xd4200000 0x00200000>; + ranges; + + interrupt-controller@d4282000 { + compatible = "marvell,mmp3-intc"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0xd4282000 0x1000>, + <0xd4284000 0x100>; + mrvl,intc-nr-irqs = <64>; + }; + + pmic_mux: interrupt-controller@d4282150 { + compatible = "mrvl,mmp2-mux-intc"; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x150 0x4>, <0x168 0x4>; + reg-names = "mux status", "mux mask"; + mrvl,intc-nr-irqs = <4>; + }; + + rtc_mux: interrupt-controller@d4282154 { + compatible = "mrvl,mmp2-mux-intc"; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x154 0x4>, <0x16c 0x4>; + reg-names = "mux status", "mux mask"; + mrvl,intc-nr-irqs = <2>; + }; + + hsi3_mux: interrupt-controller@d42821bc { + compatible = "mrvl,mmp2-mux-intc"; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x1bc 0x4>, <0x1a4 0x4>; + reg-names = "mux status", "mux mask"; + mrvl,intc-nr-irqs = <3>; + }; + + gpu_mux: interrupt-controller@d42821c0 { + compatible = "mrvl,mmp2-mux-intc"; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x1c0 0x4>, <0x1a8 0x4>; + reg-names = "mux status", "mux mask"; + mrvl,intc-nr-irqs = <3>; + }; + + twsi_mux: interrupt-controller@d4282158 { + compatible = "mrvl,mmp2-mux-intc"; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x158 0x4>, <0x170 0x4>; + reg-names = "mux status", "mux mask"; + mrvl,intc-nr-irqs = <5>; + }; + + hsi2_mux: interrupt-controller@d42821c4 { + compatible = "mrvl,mmp2-mux-intc"; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x1c4 0x4>, <0x1ac 0x4>; + reg-names = "mux status", "mux mask"; + mrvl,intc-nr-irqs = <2>; + }; + + dxo_mux: interrupt-controller@d42821c8 { + compatible = "mrvl,mmp2-mux-intc"; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x1c8 0x4>, <0x1b0 0x4>; + reg-names = "mux status", "mux mask"; + mrvl,intc-nr-irqs = <2>; + }; + + misc1_mux: interrupt-controller@d428215c { + compatible = "mrvl,mmp2-mux-intc"; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x15c 0x4>, <0x174 0x4>; + reg-names = "mux status", "mux mask"; + mrvl,intc-nr-irqs = <31>; + }; + + ci_mux: interrupt-controller@d42821cc { + compatible = "mrvl,mmp2-mux-intc"; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x1cc 0x4>, <0x1b4 0x4>; + reg-names = "mux status", "mux mask"; + mrvl,intc-nr-irqs = <2>; + }; + + ssp_mux: interrupt-controller@d4282160 { + compatible = "mrvl,mmp2-mux-intc"; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x160 0x4>, <0x178 0x4>; + reg-names = "mux status", "mux mask"; + mrvl,intc-nr-irqs = <2>; + }; + + hsi1_mux: interrupt-controller@d4282184 { + compatible = "mrvl,mmp2-mux-intc"; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x184 0x4>, <0x17c 0x4>; + reg-names = "mux status", "mux mask"; + mrvl,intc-nr-irqs = <4>; + }; + + misc2_mux: interrupt-controller@d4282188 { + compatible = "mrvl,mmp2-mux-intc"; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x188 0x4>, <0x180 0x4>; + reg-names = "mux status", "mux mask"; + mrvl,intc-nr-irqs = <20>; + }; + + hsi0_mux: interrupt-controller@d42821d0 { + compatible = "mrvl,mmp2-mux-intc"; + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x1d0 0x4>, <0x1b8 0x4>; + reg-names = "mux status", "mux mask"; + mrvl,intc-nr-irqs = <5>; + }; + + usb_otg_phy0: usb-otg-phy@d4207000 { + compatible = "marvell,mmp3-usb-phy"; + reg = <0xd4207000 0x40>; + #phy-cells = <0>; + status = "disabled"; + }; + + usb_otg0: usb-otg@d4208000 { + compatible = "marvell,pxau2o-ehci"; + reg = <0xd4208000 0x200>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&soc_clocks MMP2_CLK_USB>; + clock-names = "USBCLK"; + phys = <&usb_otg_phy0>; + phy-names = "usb"; + status = "disabled"; + }; + + hsic_phy0: hsic-phy@f0001800 { + compatible = "marvell,mmp3-hsic-phy", + "usb-nop-xceiv"; + reg = <0xf0001800 0x40>; + #phy-cells = <0>; + status = "disabled"; + }; + + hsic0: hsic@f0001000 { + compatible = "marvell,pxau2o-ehci"; + reg = <0xf0001000 0x200>; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&soc_clocks MMP2_CLK_USBHSIC0>; + clock-names = "USBCLK"; + phys = <&hsic_phy0>; + phy-names = "usb"; + phy_type = "hsic"; + #address-cells = <0x01>; + #size-cells = <0x00>; + status = "disabled"; + }; + + hsic_phy1: hsic-phy@f0002800 { + compatible = "marvell,mmp3-hsic-phy", + "usb-nop-xceiv"; + reg = <0xf0002800 0x40>; + #phy-cells = <0>; + status = "disabled"; + }; + + hsic1: hsic@f0002000 { + compatible = "marvell,pxau2o-ehci"; + reg = <0xf0002000 0x200>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&soc_clocks MMP2_CLK_USBHSIC1>; + clock-names = "USBCLK"; + phys = <&hsic_phy1>; + phy-names = "usb"; + phy_type = "hsic"; + #address-cells = <0x01>; + #size-cells = <0x00>; + status = "disabled"; + }; + + mmc1: mmc@d4280000 { + compatible = "mrvl,pxav3-mmc"; + reg = <0xd4280000 0x120>; + clocks = <&soc_clocks MMP2_CLK_SDH0>; + clock-names = "io"; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + mmc2: mmc@d4280800 { + compatible = "mrvl,pxav3-mmc"; + reg = <0xd4280800 0x120>; + clocks = <&soc_clocks MMP2_CLK_SDH1>; + clock-names = "io"; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + mmc3: mmc@d4281000 { + compatible = "mrvl,pxav3-mmc"; + reg = <0xd4281000 0x120>; + clocks = <&soc_clocks MMP2_CLK_SDH2>; + clock-names = "io"; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + mmc4: mmc@d4281800 { + compatible = "mrvl,pxav3-mmc"; + reg = <0xd4281800 0x120>; + clocks = <&soc_clocks MMP2_CLK_SDH3>; + clock-names = "io"; + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + camera0: camera@d420a000 { + compatible = "marvell,mmp2-ccic"; + reg = <0xd420a000 0x800>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&soc_clocks MMP2_CLK_CCIC0>; + clock-names = "axi"; + #clock-cells = <0>; + clock-output-names = "mclk"; + status = "disabled"; + }; + + camera1: camera@d420a800 { + compatible = "marvell,mmp2-ccic"; + reg = <0xd420a800 0x800>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&soc_clocks MMP2_CLK_CCIC1>; + clock-names = "axi"; + #clock-cells = <0>; + clock-output-names = "mclk"; + status = "disabled"; + }; + }; + + apb@d4000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0xd4000000 0x00200000>; + ranges; + + timer: timer@d4014000 { + compatible = "mrvl,mmp-timer"; + reg = <0xd4014000 0x100>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&soc_clocks MMP2_CLK_TIMER>; + }; + + uart1: uart@d4030000 { + compatible = "mrvl,mmp-uart"; + reg = <0xd4030000 0x1000>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&soc_clocks MMP2_CLK_UART0>; + resets = <&soc_clocks MMP2_CLK_UART0>; + reg-shift = <2>; + status = "disabled"; + }; + + uart2: uart@d4017000 { + compatible = "mrvl,mmp-uart"; + reg = <0xd4017000 0x1000>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&soc_clocks MMP2_CLK_UART1>; + resets = <&soc_clocks MMP2_CLK_UART1>; + reg-shift = <2>; + status = "disabled"; + }; + + uart3: uart@d4018000 { + compatible = "mrvl,mmp-uart"; + reg = <0xd4018000 0x1000>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&soc_clocks MMP2_CLK_UART2>; + resets = <&soc_clocks MMP2_CLK_UART2>; + reg-shift = <2>; + status = "disabled"; + }; + + uart4: uart@d4016000 { + compatible = "mrvl,mmp-uart"; + reg = <0xd4016000 0x1000>; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&soc_clocks MMP2_CLK_UART3>; + resets = <&soc_clocks MMP2_CLK_UART3>; + reg-shift = <2>; + status = "disabled"; + }; + + gpio: gpio@d4019000 { + compatible = "marvell,mmp2-gpio"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0xd4019000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "gpio_mux"; + clocks = <&soc_clocks MMP2_CLK_GPIO>; + resets = <&soc_clocks MMP2_CLK_GPIO>; + interrupt-controller; + #interrupt-cells = <2>; + ranges; + + gcb0: gpio@d4019000 { + reg = <0xd4019000 0x4>; + }; + + gcb1: gpio@d4019004 { + reg = <0xd4019004 0x4>; + }; + + gcb2: gpio@d4019008 { + reg = <0xd4019008 0x4>; + }; + + gcb3: gpio@d4019100 { + reg = <0xd4019100 0x4>; + }; + + gcb4: gpio@d4019104 { + reg = <0xd4019104 0x4>; + }; + + gcb5: gpio@d4019108 { + reg = <0xd4019108 0x4>; + }; + }; + + twsi1: i2c@d4011000 { + compatible = "mrvl,mmp-twsi"; + reg = <0xd4011000 0x70>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&soc_clocks MMP2_CLK_TWSI0>; + resets = <&soc_clocks MMP2_CLK_TWSI0>; + #address-cells = <1>; + #size-cells = <0>; + mrvl,i2c-fast-mode; + status = "disabled"; + }; + + twsi2: i2c@d4031000 { + compatible = "mrvl,mmp-twsi"; + reg = <0xd4031000 0x70>; + interrupt-parent = <&twsi_mux>; + interrupts = <0>; + clocks = <&soc_clocks MMP2_CLK_TWSI1>; + resets = <&soc_clocks MMP2_CLK_TWSI1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + twsi3: i2c@d4032000 { + compatible = "mrvl,mmp-twsi"; + reg = <0xd4032000 0x70>; + interrupt-parent = <&twsi_mux>; + interrupts = <1>; + clocks = <&soc_clocks MMP2_CLK_TWSI2>; + resets = <&soc_clocks MMP2_CLK_TWSI2>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + twsi4: i2c@d4033000 { + compatible = "mrvl,mmp-twsi"; + reg = <0xd4033000 0x70>; + interrupt-parent = <&twsi_mux>; + interrupts = <2>; + clocks = <&soc_clocks MMP2_CLK_TWSI3>; + resets = <&soc_clocks MMP2_CLK_TWSI3>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + + twsi5: i2c@d4033800 { + compatible = "mrvl,mmp-twsi"; + reg = <0xd4033800 0x70>; + interrupt-parent = <&twsi_mux>; + interrupts = <3>; + clocks = <&soc_clocks MMP2_CLK_TWSI4>; + resets = <&soc_clocks MMP2_CLK_TWSI4>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + twsi6: i2c@d4034000 { + compatible = "mrvl,mmp-twsi"; + reg = <0xd4034000 0x70>; + interrupt-parent = <&twsi_mux>; + interrupts = <4>; + clocks = <&soc_clocks MMP2_CLK_TWSI5>; + resets = <&soc_clocks MMP2_CLK_TWSI5>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + rtc: rtc@d4010000 { + compatible = "mrvl,mmp-rtc"; + reg = <0xd4010000 0x1000>; + interrupts = <1 0>; + interrupt-names = "rtc 1Hz", "rtc alarm"; + interrupt-parent = <&rtc_mux>; + clocks = <&soc_clocks MMP2_CLK_RTC>; + resets = <&soc_clocks MMP2_CLK_RTC>; + status = "disabled"; + }; + + ssp1: spi@d4035000 { + compatible = "marvell,mmp2-ssp"; + reg = <0xd4035000 0x1000>; + clocks = <&soc_clocks MMP2_CLK_SSP0>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + ssp2: spi@d4036000 { + compatible = "marvell,mmp2-ssp"; + reg = <0xd4036000 0x1000>; + clocks = <&soc_clocks MMP2_CLK_SSP1>; + interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + ssp3: spi@d4037000 { + compatible = "marvell,mmp2-ssp"; + reg = <0xd4037000 0x1000>; + clocks = <&soc_clocks MMP2_CLK_SSP2>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + ssp4: spi@d4039000 { + compatible = "marvell,mmp2-ssp"; + reg = <0xd4039000 0x1000>; + clocks = <&soc_clocks MMP2_CLK_SSP3>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + l2: l2-cache-controller@d0020000 { + compatible = "marvell,tauros3-cache", "arm,pl310-cache"; + reg = <0xd0020000 0x1000>; + cache-unified; + cache-level = <2>; + }; + + soc_clocks: clocks@d4050000 { + compatible = "marvell,mmp2-clock"; + reg = <0xd4050000 0x1000>, + <0xd4282800 0x400>, + <0xd4015000 0x1000>; + reg-names = "mpmu", "apmu", "apbc"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + snoop-control-unit@e0000000 { + compatible = "arm,arm11mp-scu"; + reg = <0xe0000000 0x100>; + }; + + gic: interrupt-controller@e0001000 { + compatible = "arm,arm11mp-gic"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0xe0001000 0x1000>, + <0xe0000100 0x100>; + }; + + local-timer@e0000600 { + compatible = "arm,arm11mp-twd-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_EDGE_RISING)>; + reg = <0xe0000600 0x20>; + }; + + watchdog@e0000620 { + compatible = "arm,arm11mp-twd-wdt"; + reg = <0xe0000620 0x20>; + interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_EDGE_RISING)>; + }; + }; +}; diff --git a/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi b/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi index d1eae47b83f6..e39eee628afd 100644 --- a/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi +++ b/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi @@ -27,11 +27,12 @@ compatible = "motorola,cpcap-battery"; interrupts-extended = < &cpcap 6 0 &cpcap 5 0 &cpcap 3 0 - &cpcap 20 0 &cpcap 54 0 + &cpcap 20 0 &cpcap 54 0 &cpcap 57 0 >; interrupt-names = "eol", "lowbph", "lowbpl", - "chrgcurr1", "battdetb"; + "chrgcurr1", "battdetb", + "cccal"; io-channels = <&cpcap_adc 0 &cpcap_adc 1 &cpcap_adc 5 &cpcap_adc 6>; io-channel-names = "battdetb", "battp", @@ -43,11 +44,13 @@ compatible = "motorola,mapphone-cpcap-charger"; interrupts-extended = < &cpcap 13 0 &cpcap 12 0 &cpcap 29 0 &cpcap 28 0 - &cpcap 22 0 &cpcap 20 0 &cpcap 19 0 &cpcap 54 0 + &cpcap 22 0 &cpcap 21 0 &cpcap 20 0 &cpcap 19 0 + &cpcap 54 0 >; interrupt-names = "chrg_det", "rvrs_chrg", "chrg_se1b", "se0conn", - "rvrs_mode", "chrgcurr1", "vbusvld", "battdetb"; + "rvrs_mode", "chrgcurr2", "chrgcurr1", "vbusvld", + "battdetb"; mode-gpios = <&gpio3 29 GPIO_ACTIVE_LOW &gpio3 23 GPIO_ACTIVE_LOW>; io-channels = <&cpcap_adc 0 &cpcap_adc 1 @@ -160,12 +163,12 @@ regulator-enable-ramp-delay = <1000>; }; - /* Used by DSS */ + /* Used by DSS and is the "zerov_regulator" trigger for SoC off mode */ vcsi: VCSI { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-enable-ramp-delay = <1000>; - regulator-boot-on; + regulator-always-on; }; vdac: VDAC { diff --git a/arch/arm/boot/dts/motorola-mapphone-common.dtsi b/arch/arm/boot/dts/motorola-mapphone-common.dtsi new file mode 100644 index 000000000000..85665506f4f8 --- /dev/null +++ b/arch/arm/boot/dts/motorola-mapphone-common.dtsi @@ -0,0 +1,805 @@ +// SPDX-License-Identifier: GPL-2.0-only +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include "omap443x.dtsi" +#include "motorola-cpcap-mapphone.dtsi" + +/ { + chosen { + stdout-path = &uart3; + }; + + aliases { + display0 = &lcd0; + display1 = &hdmi0; + }; + + /* + * We seem to have only 1021 MB accessible, 1021 - 1022 is locked, + * then 1023 - 1024 seems to contain mbm. + */ + memory { + device_type = "memory"; + reg = <0x80000000 0x3fd00000>; /* 1021 MB */ + }; + + /* Poweroff GPIO probably connected to CPCAP */ + gpio-poweroff { + compatible = "gpio-poweroff"; + pinctrl-0 = <&poweroff_gpio>; + pinctrl-names = "default"; + gpios = <&gpio2 18 GPIO_ACTIVE_LOW>; /* gpio50 */ + }; + + hdmi0: connector { + compatible = "hdmi-connector"; + pinctrl-0 = <&hdmi_hpd_gpio>; + pinctrl-names = "default"; + label = "hdmi"; + type = "d"; + + hpd-gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>; /* gpio63 */ + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_out>; + }; + }; + }; + + /* + * HDMI 5V regulator probably sourced from battery. Let's keep + * keep this as always enabled for HDMI to work until we've + * figured what the encoder chip is. + */ + hdmi_regulator: regulator-hdmi { + compatible = "regulator-fixed"; + regulator-name = "hdmi"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio2 27 GPIO_ACTIVE_HIGH>; /* gpio59 */ + enable-active-high; + regulator-always-on; + }; + + /* FS USB Host PHY on port 1 for mdm6600 */ + fsusb1_phy: usb-phy@1 { + compatible = "motorola,mapphone-mdm6600"; + pinctrl-0 = <&usb_mdm6600_pins>; + pinctrl-names = "default"; + enable-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>; /* gpio_95 */ + power-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; /* gpio_54 */ + reset-gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>; /* gpio_49 */ + /* mode: gpio_148 gpio_149 */ + motorola,mode-gpios = <&gpio5 20 GPIO_ACTIVE_HIGH>, + <&gpio5 21 GPIO_ACTIVE_HIGH>; + /* cmd: gpio_103 gpio_104 gpio_142 */ + motorola,cmd-gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>, + <&gpio4 8 GPIO_ACTIVE_HIGH>, + <&gpio5 14 GPIO_ACTIVE_HIGH>; + /* status: gpio_52 gpio_53 gpio_55 */ + motorola,status-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>, + <&gpio2 21 GPIO_ACTIVE_HIGH>, + <&gpio2 23 GPIO_ACTIVE_HIGH>; + #phy-cells = <0>; + }; + + /* HS USB host TLL nop-phy on port 2 for w3glte */ + hsusb2_phy: usb-phy@2 { + compatible = "usb-nop-xceiv"; + #phy-cells = <0>; + }; + + /* LCD regulator from sw5 source */ + lcd_regulator: regulator-lcd { + compatible = "regulator-fixed"; + regulator-name = "lcd"; + regulator-min-microvolt = <5050000>; + regulator-max-microvolt = <5050000>; + gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>; /* gpio96 */ + enable-active-high; + vin-supply = <&sw5>; + }; + + /* This is probably coming straight from the battery.. */ + wl12xx_vmmc: regulator-wl12xx { + compatible = "regulator-fixed"; + regulator-name = "vwl1271"; + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <1650000>; + gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>; /* gpio94 */ + startup-delay-us = <70000>; + enable-active-high; + }; + + gpio_keys { + compatible = "gpio-keys"; + + volume_down { + label = "Volume Down"; + gpios = <&gpio5 26 GPIO_ACTIVE_LOW>; /* gpio154 */ + linux,code = <KEY_VOLUMEDOWN>; + linux,can-disable; + /* Value above 7.95ms for no GPIO hardware debounce */ + debounce-interval = <10>; + }; + + slider { + label = "Keypad Slide"; + gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>; /* gpio122 */ + linux,input-type = <EV_SW>; + linux,code = <SW_KEYPAD_SLIDE>; + linux,can-disable; + /* Value above 7.95ms for no GPIO hardware debounce */ + debounce-interval = <10>; + }; + }; + + soundcard { + compatible = "audio-graph-card"; + label = "Droid 4 Audio"; + + simple-graph-card,widgets = + "Speaker", "Earpiece", + "Speaker", "Loudspeaker", + "Headphone", "Headphone Jack", + "Microphone", "Internal Mic"; + + simple-graph-card,routing = + "Earpiece", "EP", + "Loudspeaker", "SPKR", + "Headphone Jack", "HSL", + "Headphone Jack", "HSR", + "MICR", "Internal Mic"; + + dais = <&mcbsp2_port>, <&mcbsp3_port>; + }; + + pwm8: dmtimer-pwm-8 { + pinctrl-names = "default"; + pinctrl-0 = <&vibrator_direction_pin>; + + compatible = "ti,omap-dmtimer-pwm"; + #pwm-cells = <3>; + ti,timers = <&timer8>; + ti,clock-source = <0x01>; + }; + + pwm9: dmtimer-pwm-9 { + pinctrl-names = "default"; + pinctrl-0 = <&vibrator_enable_pin>; + + compatible = "ti,omap-dmtimer-pwm"; + #pwm-cells = <3>; + ti,timers = <&timer9>; + ti,clock-source = <0x01>; + }; + + vibrator { + compatible = "pwm-vibrator"; + pwms = <&pwm9 0 10000000 0>, <&pwm8 0 10000000 0>; + pwm-names = "enable", "direction"; + direction-duty-cycle-ns = <10000000>; + }; +}; + +&dss { + status = "okay"; +}; + +&dsi1 { + status = "okay"; + vdd-supply = <&vcsi>; + + port { + dsi1_out_ep: endpoint { + remote-endpoint = <&lcd0_in>; + lanes = <0 1 2 3 4 5>; + }; + }; + + lcd0: display { + compatible = "panel-dsi-cm"; + label = "lcd0"; + vddi-supply = <&lcd_regulator>; + reset-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* gpio101 */ + + width-mm = <50>; + height-mm = <89>; + + panel-timing { + clock-frequency = <0>; /* Calculated by dsi */ + + hback-porch = <2>; + hactive = <540>; + hfront-porch = <0>; + hsync-len = <2>; + + vback-porch = <1>; + vactive = <960>; + vfront-porch = <0>; + vsync-len = <1>; + + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + + port { + lcd0_in: endpoint { + remote-endpoint = <&dsi1_out_ep>; + }; + }; + }; +}; + +&hdmi { + status = "okay"; + pinctrl-0 = <&dss_hdmi_pins>; + pinctrl-names = "default"; + vdda-supply = <&vdac>; + + port { + hdmi_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + lanes = <1 0 3 2 5 4 7 6>; + }; + }; +}; + +/* Battery NVRAM on 1-wire handled by w1_ds250x driver */ +&hdqw1w { + pinctrl-0 = <&hdq_pins>; + pinctrl-names = "default"; + ti,mode = "1w"; +}; + +&i2c1 { + tmp105@48 { + compatible = "ti,tmp105"; + reg = <0x48>; + pinctrl-0 = <&tmp105_irq>; + pinctrl-names = "default"; + /* kpd_row0.gpio_178 */ + interrupts-extended = <&gpio6 18 IRQ_TYPE_EDGE_FALLING + &omap4_pmx_core 0x14e>; + interrupt-names = "irq", "wakeup"; + wakeup-source; + }; +}; + +&keypad { + keypad,num-rows = <8>; + keypad,num-columns = <8>; + linux,keymap = < + + /* Row 1 */ + MATRIX_KEY(0, 2, KEY_1) + MATRIX_KEY(0, 6, KEY_2) + MATRIX_KEY(2, 3, KEY_3) + MATRIX_KEY(0, 7, KEY_4) + MATRIX_KEY(0, 4, KEY_5) + MATRIX_KEY(5, 5, KEY_6) + MATRIX_KEY(0, 1, KEY_7) + MATRIX_KEY(0, 5, KEY_8) + MATRIX_KEY(0, 0, KEY_9) + MATRIX_KEY(1, 6, KEY_0) + + /* Row 2 */ + MATRIX_KEY(3, 4, KEY_APOSTROPHE) + MATRIX_KEY(7, 6, KEY_Q) + MATRIX_KEY(7, 7, KEY_W) + MATRIX_KEY(7, 2, KEY_E) + MATRIX_KEY(1, 0, KEY_R) + MATRIX_KEY(4, 4, KEY_T) + MATRIX_KEY(1, 2, KEY_Y) + MATRIX_KEY(6, 7, KEY_U) + MATRIX_KEY(2, 2, KEY_I) + MATRIX_KEY(5, 6, KEY_O) + MATRIX_KEY(3, 7, KEY_P) + MATRIX_KEY(6, 5, KEY_BACKSPACE) + + /* Row 3 */ + MATRIX_KEY(5, 4, KEY_TAB) + MATRIX_KEY(5, 7, KEY_A) + MATRIX_KEY(2, 7, KEY_S) + MATRIX_KEY(7, 0, KEY_D) + MATRIX_KEY(2, 6, KEY_F) + MATRIX_KEY(6, 2, KEY_G) + MATRIX_KEY(6, 6, KEY_H) + MATRIX_KEY(1, 4, KEY_J) + MATRIX_KEY(3, 1, KEY_K) + MATRIX_KEY(2, 1, KEY_L) + MATRIX_KEY(4, 6, KEY_ENTER) + + /* Row 4 */ + MATRIX_KEY(3, 6, KEY_LEFTSHIFT) /* KEY_CAPSLOCK */ + MATRIX_KEY(6, 1, KEY_Z) + MATRIX_KEY(7, 4, KEY_X) + MATRIX_KEY(5, 1, KEY_C) + MATRIX_KEY(1, 7, KEY_V) + MATRIX_KEY(2, 4, KEY_B) + MATRIX_KEY(4, 1, KEY_N) + MATRIX_KEY(1, 1, KEY_M) + MATRIX_KEY(3, 5, KEY_COMMA) + MATRIX_KEY(5, 2, KEY_DOT) + MATRIX_KEY(6, 3, KEY_UP) + MATRIX_KEY(7, 3, KEY_OK) + + /* Row 5 */ + MATRIX_KEY(2, 5, KEY_LEFTCTRL) /* KEY_LEFTSHIFT */ + MATRIX_KEY(4, 5, KEY_LEFTALT) /* SYM */ + MATRIX_KEY(6, 0, KEY_MINUS) + MATRIX_KEY(4, 7, KEY_EQUAL) + MATRIX_KEY(1, 5, KEY_SPACE) + MATRIX_KEY(3, 2, KEY_SLASH) + MATRIX_KEY(4, 3, KEY_LEFT) + MATRIX_KEY(5, 3, KEY_DOWN) + MATRIX_KEY(3, 3, KEY_RIGHT) + + /* Side buttons, KEY_VOLUMEDOWN and KEY_PWER are on CPCAP? */ + MATRIX_KEY(5, 0, KEY_VOLUMEUP) + >; +}; + +&mmc1 { + vmmc-supply = <&vwlan2>; + bus-width = <4>; + cd-gpios = <&gpio6 16 GPIO_ACTIVE_LOW>; /* gpio176 */ +}; + +&mmc2 { + vmmc-supply = <&vsdio>; + bus-width = <8>; + ti,non-removable; +}; + +&mmc3 { + vmmc-supply = <&wl12xx_vmmc>; + /* uart2_tx.sdmmc3_dat1 pad as wakeirq */ + interrupts-extended = <&wakeupgen GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH + &omap4_pmx_core 0xde>; + interrupt-names = "irq", "wakeup"; + non-removable; + bus-width = <4>; + cap-power-off-card; + keep-power-in-suspend; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@2 { + compatible = "ti,wl1285", "ti,wl1283"; + reg = <2>; + /* gpio_100 with gpmc_wait2 pad as wakeirq */ + interrupts-extended = <&gpio4 4 IRQ_TYPE_LEVEL_HIGH>, + <&omap4_pmx_core 0x4e>; + interrupt-names = "irq", "wakeup"; + ref-clock-frequency = <26000000>; + tcxo-clock-frequency = <26000000>; + }; +}; + +&i2c1 { + led-controller@38 { + compatible = "ti,lm3532"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x38>; + + enable-gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>; + + ramp-up-us = <1024>; + ramp-down-us = <8193>; + + led@0 { + reg = <0>; + led-sources = <2>; + ti,led-mode = <0>; + label = ":backlight"; + linux,default-trigger = "backlight"; + }; + + led@1 { + reg = <1>; + led-sources = <1>; + ti,led-mode = <0>; + label = ":kbd_backlight"; + }; + }; +}; + +&i2c2 { + touchscreen@4a { + compatible = "atmel,maxtouch"; + reg = <0x4a>; + pinctrl-names = "default"; + pinctrl-0 = <&touchscreen_pins>; + + reset-gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>; /* gpio173 */ + + /* gpio_183 with sys_nirq2 pad as wakeup */ + interrupts-extended = <&gpio6 23 IRQ_TYPE_EDGE_FALLING>, + <&omap4_pmx_core 0x160>; + interrupt-names = "irq", "wakeup"; + wakeup-source; + }; + + isl29030@44 { + compatible = "isil,isl29030"; + reg = <0x44>; + + pinctrl-names = "default"; + pinctrl-0 = <&als_proximity_pins>; + + interrupt-parent = <&gpio6>; + interrupts = <17 IRQ_TYPE_LEVEL_LOW>; /* gpio177 */ + }; +}; + +&omap4_pmx_core { + + /* hdmi_hpd.gpio_63 */ + hdmi_hpd_gpio: pinmux_hdmi_hpd_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x098, PIN_INPUT | MUX_MODE3) + >; + }; + + hdq_pins: pinmux_hdq_pins { + pinctrl-single,pins = < + /* 0x4a100120 hdq_sio.hdq_sio aa27 */ + OMAP4_IOPAD(0x120, PIN_INPUT | MUX_MODE0) + >; + }; + + /* hdmi_cec.hdmi_cec, hdmi_scl.hdmi_scl, hdmi_sda.hdmi_sda */ + dss_hdmi_pins: pinmux_dss_hdmi_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0) + OMAP4_IOPAD(0x09c, PIN_INPUT | MUX_MODE0) + OMAP4_IOPAD(0x09e, PIN_INPUT | MUX_MODE0) + >; + }; + + /* gpmc_ncs0.gpio_50 */ + poweroff_gpio: pinmux_poweroff_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x074, PIN_OUTPUT_PULLUP | MUX_MODE3) + >; + }; + + /* kpd_row0.gpio_178 */ + tmp105_irq: pinmux_tmp105_irq { + pinctrl-single,pins = < + OMAP4_IOPAD(0x18e, PIN_INPUT_PULLUP | MUX_MODE3) + >; + }; + + usb_gpio_mux_sel1: pinmux_usb_gpio_mux_sel1_pins { + /* gpio_60 */ + pinctrl-single,pins = < + OMAP4_IOPAD(0x088, PIN_OUTPUT | MUX_MODE3) + >; + }; + + touchscreen_pins: pinmux_touchscreen_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x180, PIN_OUTPUT | MUX_MODE3) + OMAP4_IOPAD(0x1a0, PIN_INPUT_PULLUP | MUX_MODE3) + >; + }; + + als_proximity_pins: pinmux_als_proximity_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x18c, PIN_INPUT_PULLUP | MUX_MODE3) + >; + }; + + usb_mdm6600_pins: pinmux_usb_mdm6600_pins { + pinctrl-single,pins = < + /* enable 0x4a1000d8 usbb1_ulpitll_dat7.gpio_95 ag16 */ + OMAP4_IOPAD(0x0d8, PIN_INPUT | MUX_MODE3) + + /* power 0x4a10007c gpmc_nwp.gpio_54 c25 */ + OMAP4_IOPAD(0x07c, PIN_OUTPUT | MUX_MODE3) + + /* reset 0x4a100072 gpmc_a25.gpio_49 d20 */ + OMAP4_IOPAD(0x072, PIN_OUTPUT | MUX_MODE3) + + /* mode0/bpwake 0x4a10014e sdmmc5_dat1.gpio_148 af4 */ + OMAP4_IOPAD(0x14e, PIN_OUTPUT | MUX_MODE3) + + /* mode1/apwake 0x4a100150 sdmmc5_dat2.gpio_149 ag3 */ + OMAP4_IOPAD(0x150, PIN_OFF_OUTPUT_LOW | PIN_INPUT | MUX_MODE3) + + /* status0 0x4a10007e gpmc_clk.gpio_55 b22 */ + OMAP4_IOPAD(0x07e, PIN_INPUT | MUX_MODE3) + + /* status1 0x4a10007a gpmc_ncs3.gpio_53 c22 */ + OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3) + + /* status2 0x4a100078 gpmc_ncs2.gpio_52 d21 */ + OMAP4_IOPAD(0x078, PIN_INPUT | MUX_MODE3) + + /* cmd0 0x4a100094 gpmc_ncs6.gpio_103 c24 */ + OMAP4_IOPAD(0x094, PIN_OUTPUT | MUX_MODE3) + + /* cmd1 0x4a100096 gpmc_ncs7.gpio_104 d24 */ + OMAP4_IOPAD(0x096, PIN_OUTPUT | MUX_MODE3) + + /* cmd2 0x4a100142 uart3_rts_sd.gpio_142 f28 */ + OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE3) + >; + }; + + usb_ulpi_pins: pinmux_usb_ulpi_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x196, MUX_MODE7) + OMAP4_IOPAD(0x198, MUX_MODE7) + OMAP4_IOPAD(0x1b2, PIN_INPUT_PULLUP | MUX_MODE0) + OMAP4_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE0) + OMAP4_IOPAD(0x1b6, PIN_INPUT_PULLUP | MUX_MODE0) + OMAP4_IOPAD(0x1b8, PIN_INPUT_PULLUP | MUX_MODE0) + OMAP4_IOPAD(0x1ba, PIN_INPUT_PULLUP | MUX_MODE0) + OMAP4_IOPAD(0x1bc, PIN_INPUT_PULLUP | MUX_MODE0) + OMAP4_IOPAD(0x1be, PIN_INPUT_PULLUP | MUX_MODE0) + OMAP4_IOPAD(0x1c0, PIN_INPUT_PULLUP | MUX_MODE0) + OMAP4_IOPAD(0x1c2, PIN_INPUT_PULLUP | MUX_MODE0) + OMAP4_IOPAD(0x1c4, PIN_INPUT_PULLUP | MUX_MODE0) + OMAP4_IOPAD(0x1c6, PIN_INPUT_PULLUP | MUX_MODE0) + OMAP4_IOPAD(0x1c8, PIN_INPUT_PULLUP | MUX_MODE0) + >; + }; + + /* usb0_otg_dp and usb0_otg_dm */ + usb_utmi_pins: pinmux_usb_utmi_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x196, PIN_INPUT | MUX_MODE0) + OMAP4_IOPAD(0x198, PIN_INPUT | MUX_MODE0) + OMAP4_IOPAD(0x1b2, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1b6, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1b8, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1ba, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1bc, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1be, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1c0, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1c2, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1c4, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1c6, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1c8, PIN_INPUT_PULLUP | MUX_MODE7) + >; + }; + + /* + * Note that the v3.0.8 stock userspace dynamically remuxes uart1 + * rts pin probably for PM purposes to PIN_INPUT_PULLUP | MUX_MODE7 + * when not used. If needed, we can add rts pin remux later based + * on power measurements. + */ + uart1_pins: pinmux_uart1_pins { + pinctrl-single,pins = < + /* 0x4a10013c mcspi1_cs2.uart1_cts ag23 */ + OMAP4_IOPAD(0x13c, PIN_INPUT_PULLUP | MUX_MODE1) + + /* 0x4a10013e mcspi1_cs3.uart1_rts ah23 */ + OMAP4_IOPAD(0x13e, MUX_MODE1) + + /* 0x4a100140 uart3_cts_rctx.uart1_tx f27 */ + OMAP4_IOPAD(0x140, PIN_OUTPUT | MUX_MODE1) + + /* 0x4a1001ca dpm_emu14.uart1_rx aa3 */ + OMAP4_IOPAD(0x1ca, PIN_INPUT_PULLUP | MUX_MODE2) + >; + }; + + /* uart3_tx_irtx and uart3_rx_irrx */ + uart3_pins: pinmux_uart3_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x196, MUX_MODE7) + OMAP4_IOPAD(0x198, MUX_MODE7) + OMAP4_IOPAD(0x1b2, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1b6, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1b8, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1ba, MUX_MODE2) + OMAP4_IOPAD(0x1bc, PIN_INPUT | MUX_MODE2) + OMAP4_IOPAD(0x1be, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1c0, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1c2, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1c4, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1c6, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1c8, PIN_INPUT_PULLUP | MUX_MODE7) + >; + }; + + uart4_pins: pinmux_uart4_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x15c, PIN_INPUT | MUX_MODE0) /* uart4_rx */ + OMAP4_IOPAD(0x15e, PIN_OUTPUT | MUX_MODE0) /* uart4_tx */ + OMAP4_IOPAD(0x110, PIN_INPUT_PULLUP | MUX_MODE5) /* uart4_cts */ + OMAP4_IOPAD(0x112, PIN_OUTPUT_PULLUP | MUX_MODE5) /* uart4_rts */ + >; + }; + + mcbsp2_pins: pinmux_mcbsp2_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x0f6, PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_clkx */ + OMAP4_IOPAD(0x0f8, PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_dr */ + OMAP4_IOPAD(0x0fa, PIN_OUTPUT | MUX_MODE0) /* abe_mcbsp2_dx */ + OMAP4_IOPAD(0x0fc, PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_fsx */ + >; + }; + + mcbsp3_pins: pinmux_mcbsp3_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x106, PIN_INPUT | MUX_MODE1) /* abe_mcbsp3_dr */ + OMAP4_IOPAD(0x108, PIN_OUTPUT | MUX_MODE1) /* abe_mcbsp3_dx */ + OMAP4_IOPAD(0x10a, PIN_INPUT | MUX_MODE1) /* abe_mcbsp3_clkx */ + OMAP4_IOPAD(0x10c, PIN_INPUT | MUX_MODE1) /* abe_mcbsp3_fsx */ + >; + }; + + vibrator_direction_pin: pinmux_vibrator_direction_pin { + pinctrl-single,pins = < + OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE1) /* dmtimer8_pwm_evt (gpio_27) */ + >; + }; + + vibrator_enable_pin: pinmux_vibrator_enable_pin { + pinctrl-single,pins = < + OMAP4_IOPAD(0X1d0, PIN_OUTPUT | MUX_MODE1) /* dmtimer9_pwm_evt (gpio_28) */ + >; + }; +}; + +&omap4_pmx_wkup { + usb_gpio_mux_sel2: pinmux_usb_gpio_mux_sel2_pins { + /* gpio_wk0 */ + pinctrl-single,pins = < + OMAP4_IOPAD(0x040, PIN_OUTPUT_PULLDOWN | MUX_MODE3) + >; + }; +}; + +/* RNG is used by secure mode and not accessible */ +&rng_target { + status = "disabled"; +}; + +/* Configure pwm clock source for timers 8 & 9 */ +&timer8 { + assigned-clocks = <&abe_clkctrl OMAP4_TIMER8_CLKCTRL 24>; + assigned-clock-parents = <&sys_clkin_ck>; +}; + +&timer9 { + assigned-clocks = <&l4_per_clkctrl OMAP4_TIMER9_CLKCTRL 24>; + assigned-clock-parents = <&sys_clkin_ck>; +}; + +/* + * As uart1 is wired to mdm6600 with rts and cts, we can use the cts pin for + * uart1 wakeirq. + */ +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + interrupts-extended = <&wakeupgen GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH + &omap4_pmx_core 0xfc>; +}; + +&uart3 { + interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH + &omap4_pmx_core 0x17c>; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins>; + + bluetooth { + compatible = "ti,wl1285-st"; + enable-gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>; /* gpio 174 */ + max-speed = <3686400>; + }; +}; + +&usbhsohci { + phys = <&fsusb1_phy>; + phy-names = "usb"; +}; + +&usbhsehci { + phys = <&hsusb2_phy>; +}; + +&usbhshost { + port1-mode = "ohci-phy-4pin-dpdm"; + port2-mode = "ehci-tll"; +}; + +/* Internal UTMI+ PHY used for OTG, CPCAP ULPI PHY for detection and charger */ +&usb_otg_hs { + interface-type = <1>; + mode = <3>; + + /* + * Max 300 mA steps based on similar PMIC MC13783UG.pdf "Table 10-4. + * VBUS Regulator Main Characteristics". Binding uses 2 mA units. + */ + power = <150>; +}; + +&i2c4 { + ak8975: magnetometer@c { + compatible = "asahi-kasei,ak8975"; + reg = <0x0c>; + + vdd-supply = <&vhvio>; + + interrupt-parent = <&gpio6>; + interrupts = <15 IRQ_TYPE_EDGE_RISING>; /* gpio175 */ + + rotation-matrix = "-1", "0", "0", + "0", "1", "0", + "0", "0", "-1"; + + }; + + lis3dh: accelerometer@18 { + compatible = "st,lis3dh-accel"; + reg = <0x18>; + + vdd-supply = <&vhvio>; + + interrupt-parent = <&gpio2>; + interrupts = <2 IRQ_TYPE_EDGE_BOTH>; /* gpio34 */ + + rotation-matrix = "0", "-1", "0", + "1", "0", "0", + "0", "0", "1"; + }; +}; + +&mcbsp2 { + #sound-dai-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&mcbsp2_pins>; + status = "okay"; + + mcbsp2_port: port { + cpu_dai2: endpoint { + dai-format = "i2s"; + remote-endpoint = <&cpcap_audio_codec0>; + frame-master = <&cpcap_audio_codec0>; + bitclock-master = <&cpcap_audio_codec0>; + }; + }; +}; + +&mcbsp3 { + #sound-dai-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&mcbsp3_pins>; + status = "okay"; + + mcbsp3_port: port { + cpu_dai3: endpoint { + dai-format = "dsp_a"; + frame-master = <&cpcap_audio_codec1>; + bitclock-master = <&cpcap_audio_codec1>; + remote-endpoint = <&cpcap_audio_codec1>; + }; + }; +}; + +&cpcap_audio_codec0 { + remote-endpoint = <&cpu_dai2>; +}; + +&cpcap_audio_codec1 { + remote-endpoint = <&cpu_dai3>; +}; diff --git a/arch/arm/boot/dts/mt6323.dtsi b/arch/arm/boot/dts/mt6323.dtsi index ba397407c1dd..7fda40ab5fe8 100644 --- a/arch/arm/boot/dts/mt6323.dtsi +++ b/arch/arm/boot/dts/mt6323.dtsi @@ -238,5 +238,32 @@ regulator-enable-ramp-delay = <216>; }; }; + + mt6323keys: mt6323keys { + compatible = "mediatek,mt6323-keys"; + mediatek,long-press-mode = <1>; + power-off-time-sec = <0>; + + power { + linux,keycodes = <116>; + wakeup-source; + }; + + home { + linux,keycodes = <114>; + }; + }; + + codec: mt6397codec { + compatible = "mediatek,mt6397-codec"; + }; + + power-controller { + compatible = "mediatek,mt6323-pwrc"; + }; + + rtc { + compatible = "mediatek,mt6323-rtc"; + }; }; }; diff --git a/arch/arm/boot/dts/mt7629-rfb.dts b/arch/arm/boot/dts/mt7629-rfb.dts new file mode 100644 index 000000000000..9980c10c6e29 --- /dev/null +++ b/arch/arm/boot/dts/mt7629-rfb.dts @@ -0,0 +1,274 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2019 MediaTek Inc. + * Author: Ryder Lee <ryder.lee@mediatek.com> + */ + +/dts-v1/; +#include <dt-bindings/input/input.h> +#include "mt7629.dtsi" + +/ { + model = "MediaTek MT7629 reference board"; + compatible = "mediatek,mt7629-rfb", "mediatek,mt7629"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + reset { + label = "factory"; + linux,code = <KEY_RESTART>; + gpios = <&pio 60 GPIO_ACTIVE_LOW>; + }; + + wps { + label = "wps"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&pio 58 GPIO_ACTIVE_LOW>; + }; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0x40000000 0x10000000>; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_5v: regulator-5v { + compatible = "regulator-fixed"; + regulator-name = "fixed-5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + regulator-always-on; + }; +}; + +ð { + pinctrl-names = "default"; + pinctrl-0 = <ð_pins>; + pinctrl-1 = <&ephy_leds_pins>; + status = "okay"; + + gmac0: mac@0 { + compatible = "mediatek,eth-mac"; + reg = <0>; + phy-mode = "2500base-x"; + fixed-link { + speed = <2500>; + full-duplex; + pause; + }; + }; + + gmac1: mac@1 { + compatible = "mediatek,eth-mac"; + reg = <1>; + phy-mode = "gmii"; + phy-handle = <&phy0>; + }; + + mdio: mdio-bus { + #address-cells = <1>; + #size-cells = <0>; + + phy0: ethernet-phy@0 { + reg = <0>; + }; + }; +}; + +&i2c { + pinctrl-names = "default"; + pinctrl-0 = <&i2c_pins>; + status = "okay"; +}; + +&qspi { + pinctrl-names = "default"; + pinctrl-0 = <&qspi_pins>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x00000 0x60000>; + read-only; + }; + + partition@60000 { + label = "u-boot-env"; + reg = <0x60000 0x10000>; + read-only; + }; + + factory: partition@70000 { + label = "factory"; + reg = <0x70000 0x40000>; + read-only; + }; + + partition@b0000 { + label = "kernel"; + reg = <0xb0000 0xb50000>; + }; + }; + }; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pcie_pins>; +}; + +&pciephy1 { + status = "okay"; +}; + +&pio { + eth_pins: eth-pins { + mux { + function = "eth"; + groups = "mdc_mdio"; + }; + }; + + ephy_leds_pins: ephy-leds-pins { + mux { + function = "led"; + groups = "gphy_leds_0", "ephy_leds"; + }; + }; + + i2c_pins: i2c-pins { + mux { + function = "i2c"; + groups = "i2c_0"; + }; + + conf { + pins = "I2C_SDA", "I2C_SCL"; + drive-strength = <4>; + bias-disable; + }; + }; + + pcie_pins: pcie-pins { + mux { + function = "pcie"; + groups = "pcie_clkreq", + "pcie_pereset", + "pcie_wake"; + }; + }; + + pwm_pins: pwm-pins { + mux { + function = "pwm"; + groups = "pwm_0"; + }; + }; + + /* SPI-NOR is shared pin with serial NAND */ + qspi_pins: qspi-pins { + mux { + function = "flash"; + groups = "spi_nor"; + }; + }; + + /* Serial NAND is shared pin with SPI-NOR */ + serial_nand_pins: serial-nand-pins { + mux { + function = "flash"; + groups = "snfi"; + }; + }; + + spi_pins: spi-pins { + mux { + function = "spi"; + groups = "spi_0"; + }; + }; + + uart0_pins: uart0-pins { + mux { + function = "uart"; + groups = "uart0_txd_rxd" ; + }; + }; + + uart1_pins: uart1-pins { + mux { + function = "uart"; + groups = "uart1_0_tx_rx" ; + }; + }; + + uart2_pins: uart2-pins { + mux { + function = "uart"; + groups = "uart2_0_txd_rxd" ; + }; + }; + + watchdog_pins: watchdog-pins { + mux { + function = "watchdog"; + groups = "watchdog"; + }; + }; +}; + +&spi { + pinctrl-names = "default"; + pinctrl-0 = <&spi_pins>; + status = "okay"; +}; + +&ssusb { + vusb33-supply = <®_3p3v>; + vbus-supply = <®_5v>; + status = "okay"; +}; + +&u3phy0 { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + status = "okay"; +}; + +&watchdog { + pinctrl-names = "default"; + pinctrl-0 = <&watchdog_pins>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/mt7629.dtsi b/arch/arm/boot/dts/mt7629.dtsi new file mode 100644 index 000000000000..867b88103b9d --- /dev/null +++ b/arch/arm/boot/dts/mt7629.dtsi @@ -0,0 +1,479 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2019 MediaTek Inc. + * + * Author: Ryder Lee <ryder.lee@mediatek.com> + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/mt7629-clk.h> +#include <dt-bindings/power/mt7622-power.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/phy/phy.h> +#include <dt-bindings/reset/mt7629-resets.h> + +/ { + compatible = "mediatek,mt7629"; + interrupt-parent = <&sysirq>; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + enable-method = "mediatek,mt6589-smp"; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x0>; + clock-frequency = <1250000000>; + cci-control-port = <&cci_control2>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x1>; + clock-frequency = <1250000000>; + cci-control-port = <&cci_control2>; + }; + }; + + pmu { + compatible = "arm,cortex-a7-pmu"; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 9 IRQ_TYPE_LEVEL_LOW>; + interrupt-affinity = <&cpu0>, <&cpu1>; + }; + + clk20m: oscillator-0 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <20000000>; + clock-output-names = "clk20m"; + }; + + clk40m: oscillator-1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <40000000>; + clock-output-names = "clkxtal"; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupt-parent = <&gic>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + clock-frequency = <20000000>; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + infracfg: syscon@10000000 { + compatible = "mediatek,mt7629-infracfg", "syscon"; + reg = <0x10000000 0x1000>; + #clock-cells = <1>; + }; + + pericfg: syscon@10002000 { + compatible = "mediatek,mt7629-pericfg", "syscon"; + reg = <0x10002000 0x1000>; + #clock-cells = <1>; + }; + + scpsys: scpsys@10006000 { + compatible = "mediatek,mt7629-scpsys", + "mediatek,mt7622-scpsys"; + #power-domain-cells = <1>; + reg = <0x10006000 0x1000>; + clocks = <&topckgen CLK_TOP_HIF_SEL>; + clock-names = "hif_sel"; + assigned-clocks = <&topckgen CLK_TOP_HIF_SEL>; + assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL1_D2>; + infracfg = <&infracfg>; + }; + + timer: timer@10009000 { + compatible = "mediatek,mt7629-timer", + "mediatek,mt6765-timer"; + reg = <0x10009000 0x60>; + interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk20m>; + clock-names = "clk20m"; + }; + + sysirq: interrupt-controller@10200a80 { + compatible = "mediatek,mt7629-sysirq", + "mediatek,mt6577-sysirq"; + reg = <0x10200a80 0x20>; + interrupt-controller; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; + }; + + apmixedsys: syscon@10209000 { + compatible = "mediatek,mt7629-apmixedsys", "syscon"; + reg = <0x10209000 0x1000>; + #clock-cells = <1>; + }; + + rng: rng@1020f000 { + compatible = "mediatek,mt7629-rng", + "mediatek,mt7623-rng"; + reg = <0x1020f000 0x100>; + clocks = <&infracfg CLK_INFRA_TRNG_PD>; + clock-names = "rng"; + }; + + topckgen: syscon@10210000 { + compatible = "mediatek,mt7629-topckgen", "syscon"; + reg = <0x10210000 0x1000>; + #clock-cells = <1>; + }; + + watchdog: watchdog@10212000 { + compatible = "mediatek,mt7629-wdt", + "mediatek,mt6589-wdt"; + reg = <0x10212000 0x100>; + }; + + pio: pinctrl@10217000 { + compatible = "mediatek,mt7629-pinctrl"; + reg = <0x10217000 0x8000>, + <0x10005000 0x1000>; + reg-names = "base", "eint"; + gpio-controller; + gpio-ranges = <&pio 0 0 79>; + #gpio-cells = <2>; + #interrupt-cells = <2>; + interrupt-controller; + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gic>; + }; + + gic: interrupt-controller@10300000 { + compatible = "arm,gic-400"; + interrupt-controller; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; + reg = <0x10310000 0x1000>, + <0x10320000 0x1000>, + <0x10340000 0x2000>, + <0x10360000 0x2000>; + }; + + cci: cci@10390000 { + compatible = "arm,cci-400"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x10390000 0x1000>; + ranges = <0 0x10390000 0x10000>; + + cci_control0: slave-if@1000 { + compatible = "arm,cci-400-ctrl-if"; + interface-type = "ace-lite"; + reg = <0x1000 0x1000>; + }; + + cci_control1: slave-if@4000 { + compatible = "arm,cci-400-ctrl-if"; + interface-type = "ace"; + reg = <0x4000 0x1000>; + }; + + cci_control2: slave-if@5000 { + compatible = "arm,cci-400-ctrl-if"; + interface-type = "ace"; + reg = <0x5000 0x1000>; + }; + + pmu@9000 { + compatible = "arm,cci-400-pmu,r1"; + reg = <0x9000 0x5000>; + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + uart0: serial@11002000 { + compatible = "mediatek,mt7629-uart", + "mediatek,mt6577-uart"; + reg = <0x11002000 0x400>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_UART_SEL>, + <&pericfg CLK_PERI_UART0_PD>; + clock-names = "baud", "bus"; + status = "disabled"; + }; + + uart1: serial@11003000 { + compatible = "mediatek,mt7629-uart", + "mediatek,mt6577-uart"; + reg = <0x11003000 0x400>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_UART_SEL>, + <&pericfg CLK_PERI_UART1_PD>; + clock-names = "baud", "bus"; + status = "disabled"; + }; + + uart2: serial@11004000 { + compatible = "mediatek,mt7629-uart", + "mediatek,mt6577-uart"; + reg = <0x11004000 0x400>; + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_UART_SEL>, + <&pericfg CLK_PERI_UART2_PD>; + clock-names = "baud", "bus"; + status = "disabled"; + }; + + i2c: i2c@11007000 { + compatible = "mediatek,mt7629-i2c", + "mediatek,mt2712-i2c"; + reg = <0x11007000 0x90>, + <0x11000100 0x80>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>; + clock-div = <4>; + clocks = <&pericfg CLK_PERI_I2C0_PD>, + <&pericfg CLK_PERI_AP_DMA_PD>; + clock-names = "main", "dma"; + assigned-clocks = <&topckgen CLK_TOP_AXI_SEL>; + assigned-clock-parents = <&topckgen CLK_TOP_SYSPLL1_D2>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi: spi@1100a000 { + compatible = "mediatek,mt7629-spi", + "mediatek,mt7622-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x1100a000 0x100>; + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_SYSPLL3_D2>, + <&topckgen CLK_TOP_SPI0_SEL>, + <&pericfg CLK_PERI_SPI0_PD>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + + qspi: spi@11014000 { + compatible = "mediatek,mt7629-nor", + "mediatek,mt8173-nor"; + reg = <0x11014000 0xe0>; + clocks = <&pericfg CLK_PERI_FLASH_PD>, + <&topckgen CLK_TOP_FLASH_SEL>; + clock-names = "spi", "sf"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + ssusbsys: syscon@1a000000 { + compatible = "mediatek,mt7629-ssusbsys", "syscon"; + reg = <0x1a000000 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + ssusb: usb@1a0c0000 { + compatible = "mediatek,mt7629-xhci", + "mediatek,mtk-xhci"; + reg = <0x1a0c0000 0x01000>, + <0x1a0c3e00 0x0100>; + reg-names = "mac", "ippc"; + interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_LOW>; + clocks = <&ssusbsys CLK_SSUSB_SYS_EN>, + <&ssusbsys CLK_SSUSB_REF_EN>, + <&ssusbsys CLK_SSUSB_MCU_EN>, + <&ssusbsys CLK_SSUSB_DMA_EN>; + clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck"; + assigned-clocks = <&topckgen CLK_TOP_AXI_SEL>, + <&topckgen CLK_TOP_SATA_SEL>, + <&topckgen CLK_TOP_HIF_SEL>; + assigned-clock-parents = <&topckgen CLK_TOP_SYSPLL1_D2>, + <&topckgen CLK_TOP_UNIVPLL2_D4>, + <&topckgen CLK_TOP_UNIVPLL1_D2>; + power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF1>; + phys = <&u2port0 PHY_TYPE_USB2>, + <&u3port0 PHY_TYPE_USB3>; + status = "disabled"; + }; + + u3phy0: usb-phy@1a0c4000 { + compatible = "mediatek,generic-tphy-v2"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x1a0c4000 0xe00>; + status = "disabled"; + + u2port0: usb-phy@0 { + reg = <0 0x700>; + clocks = <&ssusbsys CLK_SSUSB_U2_PHY_EN>; + clock-names = "ref"; + #phy-cells = <1>; + status = "okay"; + }; + + u3port0: usb-phy@700 { + reg = <0x700 0x700>; + clocks = <&clk20m>; + clock-names = "ref"; + #phy-cells = <1>; + status = "okay"; + }; + }; + + pciesys: syscon@1a100800 { + compatible = "mediatek,mt7629-pciesys", "syscon"; + reg = <0x1a100800 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + pcie: pcie@1a140000 { + compatible = "mediatek,mt7629-pcie"; + device_type = "pci"; + reg = <0x1a140000 0x1000>, + <0x1a145000 0x1000>; + reg-names = "subsys","port1"; + #address-cells = <3>; + #size-cells = <2>; + interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 229 IRQ_TYPE_LEVEL_LOW>; + clocks = <&pciesys CLK_PCIE_P1_MAC_EN>, + <&pciesys CLK_PCIE_P0_AHB_EN>, + <&pciesys CLK_PCIE_P1_AUX_EN>, + <&pciesys CLK_PCIE_P1_AXI_EN>, + <&pciesys CLK_PCIE_P1_OBFF_EN>, + <&pciesys CLK_PCIE_P1_PIPE_EN>; + clock-names = "sys_ck1", "ahb_ck1", + "aux_ck1", "axi_ck1", + "obff_ck1", "pipe_ck1"; + assigned-clocks = <&topckgen CLK_TOP_SATA_SEL>, + <&topckgen CLK_TOP_AXI_SEL>, + <&topckgen CLK_TOP_HIF_SEL>; + assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL2_D4>, + <&topckgen CLK_TOP_SYSPLL1_D2>, + <&topckgen CLK_TOP_UNIVPLL1_D2>; + phys = <&pcieport1 PHY_TYPE_PCIE>; + phy-names = "pcie-phy1"; + power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>; + bus-range = <0x00 0xff>; + ranges = <0x82000000 0 0x20000000 0x20000000 0 0x10000000>; + + pcie1: pcie@1,0 { + device_type = "pci"; + reg = <0x0800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + num-lanes = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc1 0>, + <0 0 0 2 &pcie_intc1 1>, + <0 0 0 3 &pcie_intc1 2>, + <0 0 0 4 &pcie_intc1 3>; + + pcie_intc1: interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + }; + }; + }; + + pciephy1: pcie-phy@1a14a000 { + compatible = "mediatek,generic-tphy-v2"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x1a14a000 0x1000>; + status = "disabled"; + + pcieport1: port1phy@0 { + reg = <0 0x1000>; + clocks = <&clk20m>; + clock-names = "ref"; + #phy-cells = <1>; + status = "okay"; + }; + }; + + ethsys: syscon@1b000000 { + compatible = "mediatek,mt7629-ethsys", "syscon"; + reg = <0x1b000000 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + eth: ethernet@1b100000 { + compatible = "mediatek,mt7629-eth","syscon"; + reg = <0x1b100000 0x20000>; + interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 224 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 225 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_ETH_SEL>, + <&topckgen CLK_TOP_F10M_REF_SEL>, + <ðsys CLK_ETH_ESW_EN>, + <ðsys CLK_ETH_GP0_EN>, + <ðsys CLK_ETH_GP1_EN>, + <ðsys CLK_ETH_GP2_EN>, + <ðsys CLK_ETH_FE_EN>, + <&sgmiisys0 CLK_SGMII_TX_EN>, + <&sgmiisys0 CLK_SGMII_RX_EN>, + <&sgmiisys0 CLK_SGMII_CDR_REF>, + <&sgmiisys0 CLK_SGMII_CDR_FB>, + <&sgmiisys1 CLK_SGMII_TX_EN>, + <&sgmiisys1 CLK_SGMII_RX_EN>, + <&sgmiisys1 CLK_SGMII_CDR_REF>, + <&sgmiisys1 CLK_SGMII_CDR_FB>, + <&apmixedsys CLK_APMIXED_SGMIPLL>, + <&apmixedsys CLK_APMIXED_ETH2PLL>; + clock-names = "ethif", "sgmiitop", "esw", "gp0", "gp1", + "gp2", "fe", "sgmii_tx250m", "sgmii_rx250m", + "sgmii_cdr_ref", "sgmii_cdr_fb", + "sgmii2_tx250m", "sgmii2_rx250m", + "sgmii2_cdr_ref", "sgmii2_cdr_fb", + "sgmii_ck", "eth2pll"; + assigned-clocks = <&topckgen CLK_TOP_ETH_SEL>, + <&topckgen CLK_TOP_F10M_REF_SEL>; + assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL1_D2>, + <&topckgen CLK_TOP_SGMIIPLL_D2>; + power-domains = <&scpsys MT7622_POWER_DOMAIN_ETHSYS>; + mediatek,ethsys = <ðsys>; + mediatek,sgmiisys = <&sgmiisys0>, <&sgmiisys1>; + mediatek,infracfg = <&infracfg>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + sgmiisys0: syscon@1b128000 { + compatible = "mediatek,mt7629-sgmiisys", "syscon"; + reg = <0x1b128000 0x3000>; + #clock-cells = <1>; + }; + + sgmiisys1: syscon@1b130000 { + compatible = "mediatek,mt7629-sgmiisys", "syscon"; + reg = <0x1b130000 0x3000>; + #clock-cells = <1>; + }; + }; +}; diff --git a/arch/arm/boot/dts/nspire-classic.dtsi b/arch/arm/boot/dts/nspire-classic.dtsi index c53f42777851..41744cc2bc72 100644 --- a/arch/arm/boot/dts/nspire-classic.dtsi +++ b/arch/arm/boot/dts/nspire-classic.dtsi @@ -8,7 +8,11 @@ /include/ "nspire.dtsi" &lcd { - lcd-type = "classic"; + port { + clcd_pads: endpoint { + remote-endpoint = <&panel_in>; + }; + }; }; &fast_timer { @@ -69,6 +73,15 @@ #interrupt-cells = <1>; }; }; + + panel { + compatible = "ti,nspire-classic-lcd-panel"; + port { + panel_in: endpoint { + remote-endpoint = <&clcd_pads>; + }; + }; + }; chosen { bootargs = "debug earlyprintk console=tty0 console=ttyS0,115200n8 root=/dev/ram0"; }; diff --git a/arch/arm/boot/dts/nspire-cx.dts b/arch/arm/boot/dts/nspire-cx.dts index da95c3736651..0c16b04e2744 100644 --- a/arch/arm/boot/dts/nspire-cx.dts +++ b/arch/arm/boot/dts/nspire-cx.dts @@ -9,7 +9,11 @@ /include/ "nspire.dtsi" &lcd { - lcd-type = "cx"; + port { + clcd_pads: endpoint { + remote-endpoint = <&panel_in>; + }; + }; }; &fast_timer { @@ -106,6 +110,15 @@ }; }; }; + + panel { + compatible = "ti,nspire-cx-lcd-panel"; + port { + panel_in: endpoint { + remote-endpoint = <&clcd_pads>; + }; + }; + }; chosen { bootargs = "debug earlyprintk console=tty0 console=ttyAMA0,115200n8 root=/dev/ram0"; }; diff --git a/arch/arm/boot/dts/nspire.dtsi b/arch/arm/boot/dts/nspire.dtsi index c35fd6667716..d9a0fd7524dc 100644 --- a/arch/arm/boot/dts/nspire.dtsi +++ b/arch/arm/boot/dts/nspire.dtsi @@ -95,8 +95,14 @@ reg = <0xC0000000 0x1000>; interrupts = <21>; - clocks = <&apb_pclk>; - clock-names = "apb_pclk"; + /* + * We assume the same clock is fed to APB and CLCDCLK. + * There is some code to scale the clock down by a factor + * 48 for the display so likely the frequency to the + * display is 1MHz and the CLCDCLK is 48 MHz. + */ + clocks = <&apb_pclk>, <&apb_pclk>; + clock-names = "clcdclk", "apb_pclk"; }; adc: adc@C4000000 { diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi index 000bf16de651..0e453fec2e3a 100644 --- a/arch/arm/boot/dts/omap2.dtsi +++ b/arch/arm/boot/dts/omap2.dtsi @@ -8,6 +8,7 @@ * kind, whether express or implied. */ +#include <dt-bindings/bus/ti-sysc.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/pinctrl/omap.h> @@ -79,17 +80,37 @@ reg = <0x480FE000 0x1000>; }; - sdma: dma-controller@48056000 { - compatible = "ti,omap2430-sdma", "ti,omap2420-sdma"; - ti,hwmods = "dma"; - reg = <0x48056000 0x1000>; - interrupts = <12>, - <13>, - <14>, - <15>; - #dma-cells = <1>; - dma-channels = <32>; - dma-requests = <64>; + target-module@48056000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x48056000 0x4>, + <0x4805602c 0x4>, + <0x48056028 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_EMUFREE | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + clocks = <&core_l3_ck>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x48056000 0x1000>; + + sdma: dma-controller@0 { + compatible = "ti,omap2420-sdma", "ti,omap-sdma"; + reg = <0 0x1000>; + interrupts = <12>, + <13>, + <14>, + <15>; + #dma-cells = <1>; + dma-channels = <32>; + dma-requests = <64>; + }; }; i2c1: i2c@48070000 { diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi index 7f57af2f10ac..15ef7593be12 100644 --- a/arch/arm/boot/dts/omap2430.dtsi +++ b/arch/arm/boot/dts/omap2430.dtsi @@ -309,6 +309,10 @@ }; }; +&sdma { + compatible = "ti,omap2430-sdma", "ti,omap-sdma"; +}; + &i2c1 { compatible = "ti,omap2430-i2c"; }; diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts index 1aa99fc1487a..125ed933ca75 100644 --- a/arch/arm/boot/dts/omap3-beagle-xm.dts +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts @@ -8,7 +8,7 @@ / { model = "TI OMAP3 BeagleBoard xM"; - compatible = "ti,omap3-beagle-xm", "ti,omap36xx", "ti,omap3"; + compatible = "ti,omap3-beagle-xm", "ti,omap3630", "ti,omap36xx", "ti,omap3"; cpus { cpu@0 { diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts index e3df3c166902..4ed3f93f5841 100644 --- a/arch/arm/boot/dts/omap3-beagle.dts +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -8,7 +8,7 @@ / { model = "TI OMAP3 BeagleBoard"; - compatible = "ti,omap3-beagle", "ti,omap3"; + compatible = "ti,omap3-beagle", "ti,omap3430", "ti,omap3"; cpus { cpu@0 { diff --git a/arch/arm/boot/dts/omap3-cm-t3530.dts b/arch/arm/boot/dts/omap3-cm-t3530.dts index 76e52c78cbb4..32dbaeaed147 100644 --- a/arch/arm/boot/dts/omap3-cm-t3530.dts +++ b/arch/arm/boot/dts/omap3-cm-t3530.dts @@ -9,7 +9,7 @@ / { model = "CompuLab CM-T3530"; - compatible = "compulab,omap3-cm-t3530", "ti,omap34xx", "ti,omap3"; + compatible = "compulab,omap3-cm-t3530", "ti,omap3430", "ti,omap34xx", "ti,omap3"; /* Regulator to trigger the reset signal of the Wifi module */ mmc2_sdio_reset: regulator-mmc2-sdio-reset { diff --git a/arch/arm/boot/dts/omap3-cm-t3730.dts b/arch/arm/boot/dts/omap3-cm-t3730.dts index 6e944dfa0f3d..683819bf0915 100644 --- a/arch/arm/boot/dts/omap3-cm-t3730.dts +++ b/arch/arm/boot/dts/omap3-cm-t3730.dts @@ -9,7 +9,7 @@ / { model = "CompuLab CM-T3730"; - compatible = "compulab,omap3-cm-t3730", "ti,omap36xx", "ti,omap3"; + compatible = "compulab,omap3-cm-t3730", "ti,omap3630", "ti,omap36xx", "ti,omap3"; wl12xx_vmmc2: wl12xx_vmmc2 { compatible = "regulator-fixed"; diff --git a/arch/arm/boot/dts/omap3-devkit8000-lcd43.dts b/arch/arm/boot/dts/omap3-devkit8000-lcd43.dts index a80fc60bc773..afed85078ad8 100644 --- a/arch/arm/boot/dts/omap3-devkit8000-lcd43.dts +++ b/arch/arm/boot/dts/omap3-devkit8000-lcd43.dts @@ -11,7 +11,7 @@ #include "omap3-devkit8000-lcd-common.dtsi" / { model = "TimLL OMAP3 Devkit8000 with 4.3'' LCD panel"; - compatible = "timll,omap3-devkit8000", "ti,omap3"; + compatible = "timll,omap3-devkit8000", "ti,omap3430", "ti,omap3"; lcd0: display { panel-timing { diff --git a/arch/arm/boot/dts/omap3-devkit8000-lcd70.dts b/arch/arm/boot/dts/omap3-devkit8000-lcd70.dts index 0753776071f8..07c51a105c0d 100644 --- a/arch/arm/boot/dts/omap3-devkit8000-lcd70.dts +++ b/arch/arm/boot/dts/omap3-devkit8000-lcd70.dts @@ -11,7 +11,7 @@ #include "omap3-devkit8000-lcd-common.dtsi" / { model = "TimLL OMAP3 Devkit8000 with 7.0'' LCD panel"; - compatible = "timll,omap3-devkit8000", "ti,omap3"; + compatible = "timll,omap3-devkit8000", "ti,omap3430", "ti,omap3"; lcd0: display { panel-timing { diff --git a/arch/arm/boot/dts/omap3-devkit8000.dts b/arch/arm/boot/dts/omap3-devkit8000.dts index faafc48d8f61..162d0726b008 100644 --- a/arch/arm/boot/dts/omap3-devkit8000.dts +++ b/arch/arm/boot/dts/omap3-devkit8000.dts @@ -7,7 +7,7 @@ #include "omap3-devkit8000-common.dtsi" / { model = "TimLL OMAP3 Devkit8000"; - compatible = "timll,omap3-devkit8000", "ti,omap3"; + compatible = "timll,omap3-devkit8000", "ti,omap3430", "ti,omap3"; aliases { display1 = &dvi0; diff --git a/arch/arm/boot/dts/omap3-echo.dts b/arch/arm/boot/dts/omap3-echo.dts new file mode 100644 index 000000000000..93ffeddada1e --- /dev/null +++ b/arch/arm/boot/dts/omap3-echo.dts @@ -0,0 +1,461 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2019 AndrĂ© Hentschel <nerv@dawncrow.de> + */ +/dts-v1/; + +#include "dm3725.dtsi" + +#include <dt-bindings/input/input.h> + +/ { + model = "Amazon Echo (first generation)"; + compatible = "amazon,omap3-echo", "ti,omap3630", "ti,omap3"; + + cpus { + cpu@0 { + cpu0-supply = <&vdd1_reg>; + }; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0xc600000>; /* 198 MB */ + }; + + vcc5v: fixedregulator0 { + compatible = "regulator-fixed"; + regulator-name = "vcc5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + regulator-always-on; + }; + + vcc3v3: fixedregulator1 { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + vcc1v8: fixedregulator2 { + compatible = "regulator-fixed"; + regulator-name = "vcc1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; + post-power-on-delay-ms = <40>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&button_pins>; + + mute-button { + label = "mute"; + linux,code = <KEY_MUTE>; + gpios = <&gpio3 6 GPIO_ACTIVE_LOW>; /* GPIO_70 */ + wakeup-source; + }; + + help-button { + label = "help"; + linux,code = <KEY_HELP>; + gpios = <&gpio3 8 GPIO_ACTIVE_LOW>; /* GPIO_72 */ + wakeup-source; + }; + }; + + rotary: rotary-encoder { + compatible = "rotary-encoder"; + gpios = < + &gpio3 5 GPIO_ACTIVE_HIGH /* GPIO_69 */ + &gpio3 12 GPIO_ACTIVE_HIGH /* GPIO_76 */ + >; + linux,axis = <REL_X>; + rotary-encoder,relative-axis; + }; +}; + +&i2c1 { + clock-frequency = <400000>; + + tps: tps@2d { + reg = <0x2d>; + }; +}; + +&i2c2 { + clock-frequency = <400000>; + + lp5523A: lp5523A@32 { + compatible = "national,lp5523"; + label = "q1"; + reg = <0x32>; + clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */ + enable-gpio = <&gpio4 13 GPIO_ACTIVE_HIGH>; /* GPIO_109 */ + + chan0 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + }; + chan1 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + }; + chan2 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + }; + chan3 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + }; + chan4 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + }; + chan5 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + }; + chan6 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + }; + chan7 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + }; + chan8 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + }; + }; + + lp5523B: lp5523B@33 { + compatible = "national,lp5523"; + label = "q3"; + reg = <0x33>; + clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */ + + chan0 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + }; + chan1 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + }; + chan2 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + }; + chan3 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + }; + chan4 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + }; + chan5 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + }; + chan6 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + }; + chan7 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + }; + chan8 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + }; + }; + + lp5523C: lp5523C@34 { + compatible = "national,lp5523"; + label = "q4"; + reg = <0x34>; + clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */ + + chan0 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + }; + chan1 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + }; + chan2 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + }; + chan3 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + }; + chan4 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + }; + chan5 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + }; + chan6 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + }; + chan7 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + }; + chan8 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + }; + }; + + lp5523D: lp552D@35 { + compatible = "national,lp5523"; + label = "q2"; + reg = <0x35>; + clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */ + + chan0 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + }; + chan1 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + }; + chan2 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + }; + chan3 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + }; + chan4 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + }; + chan5 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + }; + chan6 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + }; + chan7 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + }; + chan8 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + }; + }; +}; + +#include "tps65910.dtsi" + +&omap3_pmx_core { + tps_pins: pinmux_tps_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21e0, PIN_INPUT_PULLUP | PIN_OFF_INPUT_PULLUP | PIN_OFF_OUTPUT_LOW | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* sys_nirq.sys_nirq */ + >; + }; + + button_pins: pinmux_button_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x20dc, PIN_INPUT | MUX_MODE4) /* dss_data0.gpio_70 */ + OMAP3_CORE1_IOPAD(0x20e0, PIN_INPUT | MUX_MODE4) /* dss_data2.gpio_72 */ + >; + }; + + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */ + OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */ + OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */ + OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */ + OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */ + OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */ + >; + }; + + mmc2_pins: pinmux_mmc2_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */ + OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */ + OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */ + OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */ + OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */ + OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */ + OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat4.sdmmc2_dat4 */ + OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat5.sdmmc2_dat5 */ + OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat6.sdmmc2_dat6 */ + OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat7.sdmmc2_dat7 */ + >; + }; +}; + +&omap3_pmx_core2 { + mmc3_pins: pinmux_mmc3_pins { + pinctrl-single,pins = < + OMAP3630_CORE2_IOPAD(0x25d8, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_clk.sdmmc3_clk */ + OMAP3630_CORE2_IOPAD(0x25da, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_ctl.sdmmc3_cmd */ + OMAP3630_CORE2_IOPAD(0x25e2, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d3.sdmmc3_dat3 */ + OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d4.sdmmc3_dat0 */ + OMAP3630_CORE2_IOPAD(0x25e6, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d5.sdmmc3_dat1 */ + OMAP3630_CORE2_IOPAD(0x25e8, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d6.sdmmc3_dat2 */ + >; + }; +}; + +&mmc1 { + status = "okay"; + bus-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + vmmc-supply = <&vmmc_reg>; +}; + +&mmc2 { + status = "okay"; + bus-width = <8>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; + vmmc-supply = <&vmmc_reg>; +}; + +&mmc3 { + status = "okay"; + bus-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_pins>; + non-removable; + disable-wp; + mmc-pwrseq = <&sdio_pwrseq>; + vmmc-supply = <&vcc3v3>; + vqmmc-supply = <&vcc1v8>; +}; + +&tps { + pinctrl-names = "default"; + pinctrl-0 = <&tps_pins>; + + interrupts = <7>; /* SYS_NIRQ cascaded to intc */ + interrupt-parent = <&intc>; + + ti,en-ck32k-xtal; + ti,system-power-controller; + + vcc1-supply = <&vcc5v>; + vcc2-supply = <&vcc5v>; + vcc3-supply = <&vcc5v>; + vcc4-supply = <&vcc5v>; + vcc5-supply = <&vcc5v>; + vcc6-supply = <&vcc5v>; + vcc7-supply = <&vcc5v>; + vccio-supply = <&vcc5v>; + + regulators { + + vio_reg: regulator@1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vdd1_reg: regulator@2 { + regulator-name = "vdd_mpu"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + regulator-always-on; + }; + + vdd2_reg: regulator@3 { + regulator-name = "vdd_dsp"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + }; + + vdd3_reg: regulator@4 { + regulator-name = "vdd_core"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + vdig1_reg: regulator@5 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <2700000>; + regulator-always-on; + }; + + vdig2_reg: regulator@6 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vpll_reg: regulator@7 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + vdac_reg: regulator@8 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vaux1_reg: regulator@9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + }; + + vaux2_reg: regulator@10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vaux33_reg: regulator@11 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vmmc_reg: regulator@12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + }; +}; diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi index b295f6fad2a5..409a758c99f1 100644 --- a/arch/arm/boot/dts/omap3-gta04.dtsi +++ b/arch/arm/boot/dts/omap3-gta04.dtsi @@ -11,7 +11,7 @@ / { model = "OMAP3 GTA04"; - compatible = "ti,omap3-gta04", "ti,omap36xx", "ti,omap3"; + compatible = "ti,omap3-gta04", "ti,omap3630", "ti,omap36xx", "ti,omap3"; cpus { cpu@0 { @@ -24,6 +24,10 @@ reg = <0x80000000 0x20000000>; /* 512 MB */ }; + chosen { + stdout-path = &uart3; + }; + aliases { display0 = &lcd; display1 = &tv0; @@ -120,6 +124,7 @@ spi-max-frequency = <100000>; spi-cpol; spi-cpha; + spi-cs-high; backlight= <&backlight>; label = "lcd"; diff --git a/arch/arm/boot/dts/omap3-ha-lcd.dts b/arch/arm/boot/dts/omap3-ha-lcd.dts index badb9b3c8897..c9ecbc45c8e2 100644 --- a/arch/arm/boot/dts/omap3-ha-lcd.dts +++ b/arch/arm/boot/dts/omap3-ha-lcd.dts @@ -8,7 +8,7 @@ / { model = "TI OMAP3 HEAD acoustics LCD-baseboard with TAO3530 SOM"; - compatible = "headacoustics,omap3-ha-lcd", "technexion,omap3-tao3530", "ti,omap34xx", "ti,omap3"; + compatible = "headacoustics,omap3-ha-lcd", "technexion,omap3-tao3530", "ti,omap3430", "ti,omap34xx", "ti,omap3"; }; &omap3_pmx_core { diff --git a/arch/arm/boot/dts/omap3-ha.dts b/arch/arm/boot/dts/omap3-ha.dts index a5365252bfbe..35c4e15abeb7 100644 --- a/arch/arm/boot/dts/omap3-ha.dts +++ b/arch/arm/boot/dts/omap3-ha.dts @@ -8,7 +8,7 @@ / { model = "TI OMAP3 HEAD acoustics baseboard with TAO3530 SOM"; - compatible = "headacoustics,omap3-ha", "technexion,omap3-tao3530", "ti,omap34xx", "ti,omap3"; + compatible = "headacoustics,omap3-ha", "technexion,omap3-tao3530", "ti,omap3430", "ti,omap34xx", "ti,omap3"; }; &omap3_pmx_core { diff --git a/arch/arm/boot/dts/omap3-igep0020-rev-f.dts b/arch/arm/boot/dts/omap3-igep0020-rev-f.dts index 03dcd05fb8a0..567232584f08 100644 --- a/arch/arm/boot/dts/omap3-igep0020-rev-f.dts +++ b/arch/arm/boot/dts/omap3-igep0020-rev-f.dts @@ -10,7 +10,7 @@ / { model = "IGEPv2 Rev. F (TI OMAP AM/DM37x)"; - compatible = "isee,omap3-igep0020-rev-f", "ti,omap36xx", "ti,omap3"; + compatible = "isee,omap3-igep0020-rev-f", "ti,omap3630", "ti,omap36xx", "ti,omap3"; /* Regulator to trigger the WL_EN signal of the Wifi module */ lbep5clwmc_wlen: regulator-lbep5clwmc-wlen { @@ -49,3 +49,11 @@ interrupts = <17 IRQ_TYPE_EDGE_RISING>; /* gpio 177 */ }; }; + +&uart2 { + bluetooth { + compatible = "ti,wl1835-st"; + enable-gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>; /* gpio 137 */ + max-speed = <300000>; + }; +}; diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts index 6d0519e3dfd0..e341535a7162 100644 --- a/arch/arm/boot/dts/omap3-igep0020.dts +++ b/arch/arm/boot/dts/omap3-igep0020.dts @@ -10,7 +10,7 @@ / { model = "IGEPv2 Rev. C (TI OMAP AM/DM37x)"; - compatible = "isee,omap3-igep0020", "ti,omap36xx", "ti,omap3"; + compatible = "isee,omap3-igep0020", "ti,omap3630", "ti,omap36xx", "ti,omap3"; vmmcsdio_fixed: fixedregulator-mmcsdio { compatible = "regulator-fixed"; diff --git a/arch/arm/boot/dts/omap3-igep0030-rev-g.dts b/arch/arm/boot/dts/omap3-igep0030-rev-g.dts index 060acd1e803a..df6ba1219830 100644 --- a/arch/arm/boot/dts/omap3-igep0030-rev-g.dts +++ b/arch/arm/boot/dts/omap3-igep0030-rev-g.dts @@ -10,7 +10,7 @@ / { model = "IGEP COM MODULE Rev. G (TI OMAP AM/DM37x)"; - compatible = "isee,omap3-igep0030-rev-g", "ti,omap36xx", "ti,omap3"; + compatible = "isee,omap3-igep0030-rev-g", "ti,omap3630", "ti,omap36xx", "ti,omap3"; /* Regulator to trigger the WL_EN signal of the Wifi module */ lbep5clwmc_wlen: regulator-lbep5clwmc-wlen { @@ -71,3 +71,11 @@ interrupts = <8 IRQ_TYPE_EDGE_RISING>; /* gpio 136 */ }; }; + +&uart2 { + bluetooth { + compatible = "ti,wl1835-st"; + enable-gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>; /* gpio 137 */ + max-speed = <300000>; + }; +}; diff --git a/arch/arm/boot/dts/omap3-igep0030.dts b/arch/arm/boot/dts/omap3-igep0030.dts index 25170bd3c573..32f31035daa2 100644 --- a/arch/arm/boot/dts/omap3-igep0030.dts +++ b/arch/arm/boot/dts/omap3-igep0030.dts @@ -10,7 +10,7 @@ / { model = "IGEP COM MODULE Rev. E (TI OMAP AM/DM37x)"; - compatible = "isee,omap3-igep0030", "ti,omap36xx", "ti,omap3"; + compatible = "isee,omap3-igep0030", "ti,omap3630", "ti,omap36xx", "ti,omap3"; vmmcsdio_fixed: fixedregulator-mmcsdio { compatible = "regulator-fixed"; diff --git a/arch/arm/boot/dts/omap3-ldp.dts b/arch/arm/boot/dts/omap3-ldp.dts index 9a5fde2d9bce..ec9ba04ef43b 100644 --- a/arch/arm/boot/dts/omap3-ldp.dts +++ b/arch/arm/boot/dts/omap3-ldp.dts @@ -10,7 +10,7 @@ / { model = "TI OMAP3430 LDP (Zoom1 Labrador)"; - compatible = "ti,omap3-ldp", "ti,omap3"; + compatible = "ti,omap3-ldp", "ti,omap3430", "ti,omap3"; memory@80000000 { device_type = "memory"; diff --git a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi index c22833d4e568..73d477898ec2 100644 --- a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi +++ b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi @@ -7,7 +7,7 @@ / { model = "INCOstartec LILLY-A83X module (DM3730)"; - compatible = "incostartec,omap3-lilly-a83x", "ti,omap36xx", "ti,omap3"; + compatible = "incostartec,omap3-lilly-a83x", "ti,omap3630", "ti,omap36xx", "ti,omap3"; chosen { bootargs = "console=ttyO0,115200n8 vt.global_cursor_default=0 consoleblank=0"; diff --git a/arch/arm/boot/dts/omap3-lilly-dbb056.dts b/arch/arm/boot/dts/omap3-lilly-dbb056.dts index fec335400074..ecb4ef738e07 100644 --- a/arch/arm/boot/dts/omap3-lilly-dbb056.dts +++ b/arch/arm/boot/dts/omap3-lilly-dbb056.dts @@ -8,7 +8,7 @@ / { model = "INCOstartec LILLY-DBB056 (DM3730)"; - compatible = "incostartec,omap3-lilly-dbb056", "incostartec,omap3-lilly-a83x", "ti,omap36xx", "ti,omap3"; + compatible = "incostartec,omap3-lilly-dbb056", "incostartec,omap3-lilly-a83x", "ti,omap3630", "ti,omap36xx", "ti,omap3"; }; &twl { diff --git a/arch/arm/boot/dts/omap3-n9.dts b/arch/arm/boot/dts/omap3-n9.dts index 74c0ff2350d3..2495a696cec6 100644 --- a/arch/arm/boot/dts/omap3-n9.dts +++ b/arch/arm/boot/dts/omap3-n9.dts @@ -12,7 +12,7 @@ / { model = "Nokia N9"; - compatible = "nokia,omap3-n9", "ti,omap36xx", "ti,omap3"; + compatible = "nokia,omap3-n9", "ti,omap3630", "ti,omap36xx", "ti,omap3"; }; &i2c2 { diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index 84a5ade1e865..c3c6d7d04a76 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -155,6 +155,12 @@ pwms = <&pwm9 0 26316 0>; /* 38000 Hz */ }; + rom_rng: rng { + compatible = "nokia,n900-rom-rng"; + clocks = <&rng_ick>; + clock-names = "ick"; + }; + /* controlled (enabled/disabled) directly by bcm2048 and wl1251 */ vctcxo: vctcxo { compatible = "fixed-clock"; @@ -476,6 +482,11 @@ regulator-always-on; }; +/* First two dma channels are reserved on secure omap3 */ +&sdma { + dma-channel-mask = <0xfffffffc>; +}; + &twl { twl_audio: audio { compatible = "ti,twl4030-audio"; @@ -1013,6 +1024,11 @@ }; }; +/* RNG not directly accessible on n900, see omap3-rom-rng instead */ +&rng_target { + status = "disabled"; +}; + &usb_otg_hs { interface-type = <0>; usb-phy = <&usb2_phy>; diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi b/arch/arm/boot/dts/omap3-n950-n9.dtsi index 5441e9ffdbb4..a075b63f3087 100644 --- a/arch/arm/boot/dts/omap3-n950-n9.dtsi +++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi @@ -11,13 +11,6 @@ cpus { cpu@0 { cpu0-supply = <&vcc>; - operating-points = < - /* kHz uV */ - 300000 1012500 - 600000 1200000 - 800000 1325000 - 1000000 1375000 - >; }; }; @@ -41,7 +34,6 @@ regulator-name = "VWLAN"; gpio = <&gpio2 3 GPIO_ACTIVE_HIGH>; /* gpio 35 */ enable-active-high; - regulator-boot-off; }; leds { diff --git a/arch/arm/boot/dts/omap3-n950.dts b/arch/arm/boot/dts/omap3-n950.dts index 9886bf8b90ab..31d47a1fad84 100644 --- a/arch/arm/boot/dts/omap3-n950.dts +++ b/arch/arm/boot/dts/omap3-n950.dts @@ -12,7 +12,7 @@ / { model = "Nokia N950"; - compatible = "nokia,omap3-n950", "ti,omap36xx", "ti,omap3"; + compatible = "nokia,omap3-n950", "ti,omap3630", "ti,omap36xx", "ti,omap3"; keys { compatible = "gpio-keys"; diff --git a/arch/arm/boot/dts/omap3-overo-storm-alto35.dts b/arch/arm/boot/dts/omap3-overo-storm-alto35.dts index 18338576c41d..7f04dfad8203 100644 --- a/arch/arm/boot/dts/omap3-overo-storm-alto35.dts +++ b/arch/arm/boot/dts/omap3-overo-storm-alto35.dts @@ -14,5 +14,5 @@ / { model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Alto35"; - compatible = "gumstix,omap3-overo-alto35", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3"; + compatible = "gumstix,omap3-overo-alto35", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3"; }; diff --git a/arch/arm/boot/dts/omap3-overo-storm-chestnut43.dts b/arch/arm/boot/dts/omap3-overo-storm-chestnut43.dts index f204c8af8281..bc5a04e03336 100644 --- a/arch/arm/boot/dts/omap3-overo-storm-chestnut43.dts +++ b/arch/arm/boot/dts/omap3-overo-storm-chestnut43.dts @@ -14,7 +14,7 @@ / { model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Chestnut43"; - compatible = "gumstix,omap3-overo-chestnut43", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3"; + compatible = "gumstix,omap3-overo-chestnut43", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3"; }; &omap3_pmx_core2 { diff --git a/arch/arm/boot/dts/omap3-overo-storm-gallop43.dts b/arch/arm/boot/dts/omap3-overo-storm-gallop43.dts index c633f7cee68e..065c31cbf0e2 100644 --- a/arch/arm/boot/dts/omap3-overo-storm-gallop43.dts +++ b/arch/arm/boot/dts/omap3-overo-storm-gallop43.dts @@ -14,7 +14,7 @@ / { model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Gallop43"; - compatible = "gumstix,omap3-overo-gallop43", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3"; + compatible = "gumstix,omap3-overo-gallop43", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3"; }; &omap3_pmx_core2 { diff --git a/arch/arm/boot/dts/omap3-overo-storm-palo35.dts b/arch/arm/boot/dts/omap3-overo-storm-palo35.dts index fb88ebc9858c..e38c1c51392c 100644 --- a/arch/arm/boot/dts/omap3-overo-storm-palo35.dts +++ b/arch/arm/boot/dts/omap3-overo-storm-palo35.dts @@ -14,7 +14,7 @@ / { model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Palo35"; - compatible = "gumstix,omap3-overo-palo35", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3"; + compatible = "gumstix,omap3-overo-palo35", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3"; }; &omap3_pmx_core2 { diff --git a/arch/arm/boot/dts/omap3-overo-storm-palo43.dts b/arch/arm/boot/dts/omap3-overo-storm-palo43.dts index 76cca00d97b6..e6dc23159c4d 100644 --- a/arch/arm/boot/dts/omap3-overo-storm-palo43.dts +++ b/arch/arm/boot/dts/omap3-overo-storm-palo43.dts @@ -14,7 +14,7 @@ / { model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Palo43"; - compatible = "gumstix,omap3-overo-palo43", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3"; + compatible = "gumstix,omap3-overo-palo43", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3"; }; &omap3_pmx_core2 { diff --git a/arch/arm/boot/dts/omap3-overo-storm-summit.dts b/arch/arm/boot/dts/omap3-overo-storm-summit.dts index cc081a9e4c1e..587c08ce282d 100644 --- a/arch/arm/boot/dts/omap3-overo-storm-summit.dts +++ b/arch/arm/boot/dts/omap3-overo-storm-summit.dts @@ -14,7 +14,7 @@ / { model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Summit"; - compatible = "gumstix,omap3-overo-summit", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3"; + compatible = "gumstix,omap3-overo-summit", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3"; }; &omap3_pmx_core2 { diff --git a/arch/arm/boot/dts/omap3-overo-storm-tobi.dts b/arch/arm/boot/dts/omap3-overo-storm-tobi.dts index 1de41c0826e0..f57de6010994 100644 --- a/arch/arm/boot/dts/omap3-overo-storm-tobi.dts +++ b/arch/arm/boot/dts/omap3-overo-storm-tobi.dts @@ -14,6 +14,6 @@ / { model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Tobi"; - compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3"; + compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3"; }; diff --git a/arch/arm/boot/dts/omap3-overo-storm-tobiduo.dts b/arch/arm/boot/dts/omap3-overo-storm-tobiduo.dts index 9ed13118ed8e..281af6c113be 100644 --- a/arch/arm/boot/dts/omap3-overo-storm-tobiduo.dts +++ b/arch/arm/boot/dts/omap3-overo-storm-tobiduo.dts @@ -14,5 +14,5 @@ / { model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on TobiDuo"; - compatible = "gumstix,omap3-overo-tobiduo", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3"; + compatible = "gumstix,omap3-overo-tobiduo", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3"; }; diff --git a/arch/arm/boot/dts/omap3-pandora-1ghz.dts b/arch/arm/boot/dts/omap3-pandora-1ghz.dts index 81b957f33c9f..ea509956d7ac 100644 --- a/arch/arm/boot/dts/omap3-pandora-1ghz.dts +++ b/arch/arm/boot/dts/omap3-pandora-1ghz.dts @@ -16,7 +16,7 @@ / { model = "Pandora Handheld Console 1GHz"; - compatible = "openpandora,omap3-pandora-1ghz", "ti,omap36xx", "ti,omap3"; + compatible = "openpandora,omap3-pandora-1ghz", "ti,omap3630", "ti,omap36xx", "ti,omap3"; }; &omap3_pmx_core2 { diff --git a/arch/arm/boot/dts/omap3-pandora-common.dtsi b/arch/arm/boot/dts/omap3-pandora-common.dtsi index ec5891718ae6..150d5be42d27 100644 --- a/arch/arm/boot/dts/omap3-pandora-common.dtsi +++ b/arch/arm/boot/dts/omap3-pandora-common.dtsi @@ -226,6 +226,17 @@ gpio = <&gpio6 4 GPIO_ACTIVE_HIGH>; /* GPIO_164 */ }; + /* wl1251 wifi+bt module */ + wlan_en: fixed-regulator-wg7210_en { + compatible = "regulator-fixed"; + regulator-name = "vwlan"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + startup-delay-us = <50000>; + enable-active-high; + gpio = <&gpio1 23 GPIO_ACTIVE_HIGH>; + }; + /* wg7210 (wifi+bt module) 32k clock buffer */ wg7210_32k: fixed-regulator-wg7210_32k { compatible = "regulator-fixed"; @@ -522,9 +533,30 @@ /*wp-gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>;*/ /* GPIO_127 */ }; -/* mmc3 is probed using pdata-quirks to pass wl1251 card data */ &mmc3 { - status = "disabled"; + vmmc-supply = <&wlan_en>; + + bus-width = <4>; + non-removable; + ti,non-removable; + cap-power-off-card; + + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_pins>; + + #address-cells = <1>; + #size-cells = <0>; + + wlan: wifi@1 { + compatible = "ti,wl1251"; + + reg = <1>; + + interrupt-parent = <&gpio1>; + interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; /* GPIO_21 */ + + ti,wl1251-has-eeprom; + }; }; /* bluetooth*/ diff --git a/arch/arm/boot/dts/omap3-sbc-t3530.dts b/arch/arm/boot/dts/omap3-sbc-t3530.dts index ae96002abb3b..24bf3fd86641 100644 --- a/arch/arm/boot/dts/omap3-sbc-t3530.dts +++ b/arch/arm/boot/dts/omap3-sbc-t3530.dts @@ -8,7 +8,7 @@ / { model = "CompuLab SBC-T3530 with CM-T3530"; - compatible = "compulab,omap3-sbc-t3530", "compulab,omap3-cm-t3530", "ti,omap34xx", "ti,omap3"; + compatible = "compulab,omap3-sbc-t3530", "compulab,omap3-cm-t3530", "ti,omap3430", "ti,omap34xx", "ti,omap3"; aliases { display0 = &dvi0; diff --git a/arch/arm/boot/dts/omap3-sbc-t3730.dts b/arch/arm/boot/dts/omap3-sbc-t3730.dts index 7de6df16fc17..eb3893b9535e 100644 --- a/arch/arm/boot/dts/omap3-sbc-t3730.dts +++ b/arch/arm/boot/dts/omap3-sbc-t3730.dts @@ -8,7 +8,7 @@ / { model = "CompuLab SBC-T3730 with CM-T3730"; - compatible = "compulab,omap3-sbc-t3730", "compulab,omap3-cm-t3730", "ti,omap36xx", "ti,omap3"; + compatible = "compulab,omap3-sbc-t3730", "compulab,omap3-cm-t3730", "ti,omap3630", "ti,omap36xx", "ti,omap3"; aliases { display0 = &dvi0; diff --git a/arch/arm/boot/dts/omap3-sniper.dts b/arch/arm/boot/dts/omap3-sniper.dts index 40a87330e8c3..b6879cdc5c13 100644 --- a/arch/arm/boot/dts/omap3-sniper.dts +++ b/arch/arm/boot/dts/omap3-sniper.dts @@ -9,7 +9,7 @@ / { model = "LG Optimus Black"; - compatible = "lg,omap3-sniper", "ti,omap36xx", "ti,omap3"; + compatible = "lg,omap3-sniper", "ti,omap3630", "ti,omap36xx", "ti,omap3"; cpus { cpu@0 { diff --git a/arch/arm/boot/dts/omap3-tao3530.dtsi b/arch/arm/boot/dts/omap3-tao3530.dtsi index a7a04d78deeb..f24e2326cfa7 100644 --- a/arch/arm/boot/dts/omap3-tao3530.dtsi +++ b/arch/arm/boot/dts/omap3-tao3530.dtsi @@ -222,7 +222,7 @@ pinctrl-0 = <&mmc1_pins>; vmmc-supply = <&vmmc1>; vqmmc-supply = <&vsim>; - cd-gpios = <&twl_gpio 0 GPIO_ACTIVE_HIGH>; + cd-gpios = <&twl_gpio 0 GPIO_ACTIVE_LOW>; bus-width = <8>; }; diff --git a/arch/arm/boot/dts/omap3-thunder.dts b/arch/arm/boot/dts/omap3-thunder.dts index 6276e7079b36..64221e3b3477 100644 --- a/arch/arm/boot/dts/omap3-thunder.dts +++ b/arch/arm/boot/dts/omap3-thunder.dts @@ -8,7 +8,7 @@ / { model = "TI OMAP3 Thunder baseboard with TAO3530 SOM"; - compatible = "technexion,omap3-thunder", "technexion,omap3-tao3530", "ti,omap34xx", "ti,omap3"; + compatible = "technexion,omap3-thunder", "technexion,omap3-tao3530", "ti,omap3430", "ti,omap34xx", "ti,omap3"; }; &omap3_pmx_core { diff --git a/arch/arm/boot/dts/omap3-zoom3.dts b/arch/arm/boot/dts/omap3-zoom3.dts index db3a2fe84e99..d240e39f2151 100644 --- a/arch/arm/boot/dts/omap3-zoom3.dts +++ b/arch/arm/boot/dts/omap3-zoom3.dts @@ -9,7 +9,7 @@ / { model = "TI Zoom3"; - compatible = "ti,omap3-zoom3", "ti,omap36xx", "ti,omap3"; + compatible = "ti,omap3-zoom3", "ti,omap3630", "ti,omap36xx", "ti,omap3"; cpus { cpu@0 { diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index 4043ecb38016..634ea16a711e 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -8,6 +8,7 @@ * kind, whether express or implied. */ +#include <dt-bindings/bus/ti-sysc.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/pinctrl/omap.h> @@ -205,17 +206,41 @@ reg = <0x48200000 0x1000>; }; - sdma: dma-controller@48056000 { - compatible = "ti,omap3630-sdma", "ti,omap3430-sdma"; - reg = <0x48056000 0x1000>; - interrupts = <12>, - <13>, - <14>, - <15>; - #dma-cells = <1>; - dma-channels = <32>; - dma-requests = <96>; - ti,hwmods = "dma"; + target-module@48056000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x48056000 0x4>, + <0x4805602c 0x4>, + <0x48056028 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_EMUFREE | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, core_pwrdm, core_l3_clkdm */ + clocks = <&core_l3_ick>; + clock-names = "ick"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x48056000 0x1000>; + + sdma: dma-controller@0 { + compatible = "ti,omap3430-sdma", "ti,omap-sdma"; + reg = <0x0 0x1000>; + interrupts = <12>, + <13>, + <14>, + <15>; + #dma-cells = <1>; + dma-channels = <32>; + dma-requests = <96>; + }; }; gpio1: gpio@48310000 { @@ -502,6 +527,30 @@ status = "disabled"; }; + /* Likely needs to be tagged disabled on HS devices */ + rng_target: target-module@480a0000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x480a003c 0x4>, + <0x480a0040 0x4>, + <0x480a0044 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>; + ti,syss-mask = <1>; + clocks = <&rng_ick>; + clock-names = "ick"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x480a0000 0x2000>; + + rng: rng@0 { + compatible = "ti,omap2-rng"; + reg = <0x0 0x2000>; + interrupts = <52>; + }; + }; + mcbsp2: mcbsp@49022000 { compatible = "ti,omap3-mcbsp"; reg = <0x49022000 0xff>, diff --git a/arch/arm/boot/dts/omap3430-sdp.dts b/arch/arm/boot/dts/omap3430-sdp.dts index 0abd61108a53..7bfde8aac7ae 100644 --- a/arch/arm/boot/dts/omap3430-sdp.dts +++ b/arch/arm/boot/dts/omap3430-sdp.dts @@ -8,7 +8,7 @@ / { model = "TI OMAP3430 SDP"; - compatible = "ti,omap3430-sdp", "ti,omap3"; + compatible = "ti,omap3430-sdp", "ti,omap3430", "ti,omap3"; memory@80000000 { device_type = "memory"; diff --git a/arch/arm/boot/dts/omap34xx-omap36xx-clocks.dtsi b/arch/arm/boot/dts/omap34xx-omap36xx-clocks.dtsi index 5e9d1afcd422..21079cdf2663 100644 --- a/arch/arm/boot/dts/omap34xx-omap36xx-clocks.dtsi +++ b/arch/arm/boot/dts/omap34xx-omap36xx-clocks.dtsi @@ -260,6 +260,6 @@ <&gpt10_ick>, <&mcbsp5_ick>, <&mcbsp1_ick>, <&omapctrl_ick>, <&aes2_ick>, <&sha12_ick>, <&icr_ick>, <&des2_ick>, <&mspro_ick>, <&mailboxes_ick>, - <&mspro_fck>; + <&rng_ick>, <&mspro_fck>; }; }; diff --git a/arch/arm/boot/dts/omap34xx.dtsi b/arch/arm/boot/dts/omap34xx.dtsi index f572a477f74c..c4dd9801840d 100644 --- a/arch/arm/boot/dts/omap34xx.dtsi +++ b/arch/arm/boot/dts/omap34xx.dtsi @@ -16,19 +16,67 @@ / { cpus { cpu: cpu@0 { - /* OMAP343x/OMAP35xx variants OPP1-5 */ - operating-points = < - /* kHz uV */ - 125000 975000 - 250000 1075000 - 500000 1200000 - 550000 1270000 - 600000 1350000 - >; + /* OMAP343x/OMAP35xx variants OPP1-6 */ + operating-points-v2 = <&cpu0_opp_table>; + clock-latency = <300000>; /* From legacy driver */ }; }; + /* see Documentation/devicetree/bindings/opp/opp.txt */ + cpu0_opp_table: opp-table { + compatible = "operating-points-v2-ti-cpu"; + syscon = <&scm_conf>; + + opp1-125000000 { + opp-hz = /bits/ 64 <125000000>; + /* + * we currently only select the max voltage from table + * Table 3-3 of the omap3530 Data sheet (SPRS507F). + * Format is: <target min max> + */ + opp-microvolt = <975000 975000 975000>; + /* + * first value is silicon revision bit mask + * second one 720MHz Device Identification bit mask + */ + opp-supported-hw = <0xffffffff 3>; + }; + + opp2-250000000 { + opp-hz = /bits/ 64 <250000000>; + opp-microvolt = <1075000 1075000 1075000>; + opp-supported-hw = <0xffffffff 3>; + opp-suspend; + }; + + opp3-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <1200000 1200000 1200000>; + opp-supported-hw = <0xffffffff 3>; + }; + + opp4-550000000 { + opp-hz = /bits/ 64 <550000000>; + opp-microvolt = <1275000 1275000 1275000>; + opp-supported-hw = <0xffffffff 3>; + }; + + opp5-600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <1350000 1350000 1350000>; + opp-supported-hw = <0xffffffff 3>; + }; + + opp6-720000000 { + opp-hz = /bits/ 64 <720000000>; + opp-microvolt = <1350000 1350000 1350000>; + /* only high-speed grade omap3530 devices */ + opp-supported-hw = <0xffffffff 2>; + turbo-mode; + }; + }; + ocp@68000000 { omap3_pmx_core2: pinmux@480025d8 { compatible = "ti,omap3-padconf", "pinctrl-single"; @@ -100,6 +148,32 @@ interrupts = <18>; }; }; + + /* + * On omap34xx the OCP registers do not seem to be accessible + * at all unlike on 36xx. Maybe SGX is permanently set to + * "OCP bypass mode", or maybe there is OCP_SYSCONFIG that is + * write-only at 0x50000e10. We detect SGX based on the SGX + * revision register instead of the unreadable OCP revision + * register. Also note that on early 34xx es1 revision there + * are also different clocks, but we do not have any dts users + * for it. + */ + sgx_module: target-module@50000000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x50000014 0x4>; + reg-names = "rev"; + clocks = <&sgx_fck>, <&sgx_ick>; + clock-names = "fck", "ick"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x50000000 0x4000>; + + /* + * Closed source PowerVR driver, no child device + * binding or driver in mainline + */ + }; }; thermal_zones: thermal-zones { diff --git a/arch/arm/boot/dts/omap36xx-clocks.dtsi b/arch/arm/boot/dts/omap36xx-clocks.dtsi index e66fc57ec35d..4e9cc9003594 100644 --- a/arch/arm/boot/dts/omap36xx-clocks.dtsi +++ b/arch/arm/boot/dts/omap36xx-clocks.dtsi @@ -105,3 +105,7 @@ <&mcbsp4_ick>, <&uart4_fck>; }; }; + +&dpll4_m4_ck { + ti,max-div = <31>; +}; diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi index 6fb23ada1f64..71f3c8f1f924 100644 --- a/arch/arm/boot/dts/omap36xx.dtsi +++ b/arch/arm/boot/dts/omap36xx.dtsi @@ -19,16 +19,65 @@ }; cpus { - /* OMAP3630/OMAP37xx 'standard device' variants OPP50 to OPP130 */ + /* OMAP3630/OMAP37xx variants OPP50 to OPP130 and OPP1G */ cpu: cpu@0 { - operating-points = < - /* kHz uV */ - 300000 1012500 - 600000 1200000 - 800000 1325000 - >; - clock-latency = <300000>; /* From legacy driver */ + operating-points-v2 = <&cpu0_opp_table>; + + vbb-supply = <&abb_mpu_iva>; + clock-latency = <300000>; /* From omap-cpufreq driver */ + }; + }; + + /* see Documentation/devicetree/bindings/opp/opp.txt */ + cpu0_opp_table: opp-table { + compatible = "operating-points-v2-ti-cpu"; + syscon = <&scm_conf>; + + opp50-300000000 { + opp-hz = /bits/ 64 <300000000>; + /* + * we currently only select the max voltage from table + * Table 4-19 of the DM3730 Data sheet (SPRS685B) + * Format is: cpu0-supply: <target min max> + * vbb-supply: <target min max> + */ + opp-microvolt = <1012500 1012500 1012500>, + <1012500 1012500 1012500>; + /* + * first value is silicon revision bit mask + * second one is "speed binned" bit mask + */ + opp-supported-hw = <0xffffffff 3>; + opp-suspend; + }; + + opp100-600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <1200000 1200000 1200000>, + <1200000 1200000 1200000>; + opp-supported-hw = <0xffffffff 3>; }; + + opp130-800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = <1325000 1325000 1325000>, + <1325000 1325000 1325000>; + opp-supported-hw = <0xffffffff 3>; + }; + + opp1g-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <1375000 1375000 1375000>, + <1375000 1375000 1375000>; + /* only on am/dm37x with speed-binned bit set */ + opp-supported-hw = <0xffffffff 2>; + turbo-mode; + }; + }; + + opp_supply_mpu_iva: opp_supply { + compatible = "ti,omap-opp-supply"; + ti,absolute-max-voltage-uv = <1375000>; }; ocp@68000000 { @@ -139,6 +188,34 @@ interrupts = <18>; }; }; + + /* + * Note that the sysconfig register layout is a subset of the + * "ti,sysc-omap4" type register with just sidle and midle bits + * available while omap34xx has "ti,sysc-omap2" type sysconfig. + */ + sgx_module: target-module@50000000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x5000fe00 0x4>, + <0x5000fe10 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + clocks = <&sgx_fck>, <&sgx_ick>; + clock-names = "fck", "ick"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x50000000 0x2000000>; + + /* + * Closed source PowerVR driver, no child device + * binding or driver in mainline + */ + }; }; thermal_zones: thermal-zones { @@ -146,6 +223,10 @@ }; }; +&sdma { + compatible = "ti,omap3630-sdma", "ti,omap-sdma"; +}; + /* OMAP3630 needs dss_96m_fck for VENC */ &venc { clocks = <&dss_tv_fck>, <&dss_96m_fck>; diff --git a/arch/arm/boot/dts/omap3xxx-clocks.dtsi b/arch/arm/boot/dts/omap3xxx-clocks.dtsi index 685c82a9d03e..0656c32439d2 100644 --- a/arch/arm/boot/dts/omap3xxx-clocks.dtsi +++ b/arch/arm/boot/dts/omap3xxx-clocks.dtsi @@ -416,7 +416,7 @@ #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll4_ck>; - ti,max-div = <32>; + ti,max-div = <16>; reg = <0x0e40>; ti,index-starts-at-one; }; diff --git a/arch/arm/boot/dts/omap4-droid-bionic-xt875.dts b/arch/arm/boot/dts/omap4-droid-bionic-xt875.dts new file mode 100644 index 000000000000..ba5c35b7027d --- /dev/null +++ b/arch/arm/boot/dts/omap4-droid-bionic-xt875.dts @@ -0,0 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only +/dts-v1/; + +#include "motorola-mapphone-common.dtsi" + +/ { + model = "Motorola Droid Bionic XT875"; + compatible = "motorola,droid-bionic", "ti,omap4430", "ti,omap4"; +}; diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts b/arch/arm/boot/dts/omap4-droid4-xt894.dts index 4454449de00c..c0d2fd92aea3 100644 --- a/arch/arm/boot/dts/omap4-droid4-xt894.dts +++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts @@ -1,784 +1,9 @@ // SPDX-License-Identifier: GPL-2.0-only /dts-v1/; -#include <dt-bindings/input/input.h> -#include "omap443x.dtsi" -#include "motorola-cpcap-mapphone.dtsi" +#include "motorola-mapphone-common.dtsi" / { model = "Motorola Droid 4 XT894"; compatible = "motorola,droid4", "ti,omap4430", "ti,omap4"; - - chosen { - stdout-path = &uart3; - }; - - aliases { - display0 = &lcd0; - display1 = &hdmi0; - }; - - /* - * We seem to have only 1021 MB accessible, 1021 - 1022 is locked, - * then 1023 - 1024 seems to contain mbm. - */ - memory { - device_type = "memory"; - reg = <0x80000000 0x3fd00000>; /* 1021 MB */ - }; - - /* Poweroff GPIO probably connected to CPCAP */ - gpio-poweroff { - compatible = "gpio-poweroff"; - pinctrl-0 = <&poweroff_gpio>; - pinctrl-names = "default"; - gpios = <&gpio2 18 GPIO_ACTIVE_LOW>; /* gpio50 */ - }; - - hdmi0: connector { - compatible = "hdmi-connector"; - pinctrl-0 = <&hdmi_hpd_gpio>; - pinctrl-names = "default"; - label = "hdmi"; - type = "d"; - - hpd-gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>; /* gpio63 */ - - port { - hdmi_connector_in: endpoint { - remote-endpoint = <&hdmi_out>; - }; - }; - }; - - /* - * HDMI 5V regulator probably sourced from battery. Let's keep - * keep this as always enabled for HDMI to work until we've - * figured what the encoder chip is. - */ - hdmi_regulator: regulator-hdmi { - compatible = "regulator-fixed"; - regulator-name = "hdmi"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio2 27 GPIO_ACTIVE_HIGH>; /* gpio59 */ - enable-active-high; - regulator-always-on; - }; - - /* FS USB Host PHY on port 1 for mdm6600 */ - fsusb1_phy: usb-phy@1 { - compatible = "motorola,mapphone-mdm6600"; - pinctrl-0 = <&usb_mdm6600_pins>; - pinctrl-names = "default"; - enable-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>; /* gpio_95 */ - power-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; /* gpio_54 */ - reset-gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>; /* gpio_49 */ - /* mode: gpio_148 gpio_149 */ - motorola,mode-gpios = <&gpio5 20 GPIO_ACTIVE_HIGH>, - <&gpio5 21 GPIO_ACTIVE_HIGH>; - /* cmd: gpio_103 gpio_104 gpio_142 */ - motorola,cmd-gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>, - <&gpio4 8 GPIO_ACTIVE_HIGH>, - <&gpio5 14 GPIO_ACTIVE_HIGH>; - /* status: gpio_52 gpio_53 gpio_55 */ - motorola,status-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>, - <&gpio2 21 GPIO_ACTIVE_HIGH>, - <&gpio2 23 GPIO_ACTIVE_HIGH>; - #phy-cells = <0>; - }; - - /* HS USB host TLL nop-phy on port 2 for w3glte */ - hsusb2_phy: usb-phy@2 { - compatible = "usb-nop-xceiv"; - #phy-cells = <0>; - }; - - /* LCD regulator from sw5 source */ - lcd_regulator: regulator-lcd { - compatible = "regulator-fixed"; - regulator-name = "lcd"; - regulator-min-microvolt = <5050000>; - regulator-max-microvolt = <5050000>; - gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>; /* gpio96 */ - enable-active-high; - vin-supply = <&sw5>; - }; - - /* This is probably coming straight from the battery.. */ - wl12xx_vmmc: regulator-wl12xx { - compatible = "regulator-fixed"; - regulator-name = "vwl1271"; - regulator-min-microvolt = <1650000>; - regulator-max-microvolt = <1650000>; - gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>; /* gpio94 */ - startup-delay-us = <70000>; - enable-active-high; - }; - - gpio_keys { - compatible = "gpio-keys"; - - volume_down { - label = "Volume Down"; - gpios = <&gpio5 26 GPIO_ACTIVE_LOW>; /* gpio154 */ - linux,code = <KEY_VOLUMEDOWN>; - linux,can-disable; - /* Value above 7.95ms for no GPIO hardware debounce */ - debounce-interval = <10>; - }; - - slider { - label = "Keypad Slide"; - gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>; /* gpio122 */ - linux,input-type = <EV_SW>; - linux,code = <SW_KEYPAD_SLIDE>; - linux,can-disable; - /* Value above 7.95ms for no GPIO hardware debounce */ - debounce-interval = <10>; - }; - }; - - soundcard { - compatible = "audio-graph-card"; - label = "Droid 4 Audio"; - - simple-graph-card,widgets = - "Speaker", "Earpiece", - "Speaker", "Loudspeaker", - "Headphone", "Headphone Jack", - "Microphone", "Internal Mic"; - - simple-graph-card,routing = - "Earpiece", "EP", - "Loudspeaker", "SPKR", - "Headphone Jack", "HSL", - "Headphone Jack", "HSR", - "MICR", "Internal Mic"; - - dais = <&mcbsp2_port>, <&mcbsp3_port>; - }; - - pwm8: dmtimer-pwm-8 { - pinctrl-names = "default"; - pinctrl-0 = <&vibrator_direction_pin>; - - compatible = "ti,omap-dmtimer-pwm"; - #pwm-cells = <3>; - ti,timers = <&timer8>; - ti,clock-source = <0x01>; - }; - - pwm9: dmtimer-pwm-9 { - pinctrl-names = "default"; - pinctrl-0 = <&vibrator_enable_pin>; - - compatible = "ti,omap-dmtimer-pwm"; - #pwm-cells = <3>; - ti,timers = <&timer9>; - ti,clock-source = <0x01>; - }; - - vibrator { - compatible = "pwm-vibrator"; - pwms = <&pwm9 0 10000000 0>, <&pwm8 0 10000000 0>; - pwm-names = "enable", "direction"; - direction-duty-cycle-ns = <10000000>; - }; -}; - -&dss { - status = "okay"; -}; - -&dsi1 { - status = "okay"; - vdd-supply = <&vcsi>; - - port { - dsi1_out_ep: endpoint { - remote-endpoint = <&lcd0_in>; - lanes = <0 1 2 3 4 5>; - }; - }; - - lcd0: display { - compatible = "panel-dsi-cm"; - label = "lcd0"; - vddi-supply = <&lcd_regulator>; - reset-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* gpio101 */ - - width-mm = <50>; - height-mm = <89>; - - panel-timing { - clock-frequency = <0>; /* Calculated by dsi */ - - hback-porch = <2>; - hactive = <540>; - hfront-porch = <0>; - hsync-len = <2>; - - vback-porch = <1>; - vactive = <960>; - vfront-porch = <0>; - vsync-len = <1>; - - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - - port { - lcd0_in: endpoint { - remote-endpoint = <&dsi1_out_ep>; - }; - }; - }; -}; - -&hdmi { - status = "okay"; - pinctrl-0 = <&dss_hdmi_pins>; - pinctrl-names = "default"; - vdda-supply = <&vdac>; - - port { - hdmi_out: endpoint { - remote-endpoint = <&hdmi_connector_in>; - lanes = <1 0 3 2 5 4 7 6>; - }; - }; -}; - -&i2c1 { - tmp105@48 { - compatible = "ti,tmp105"; - reg = <0x48>; - pinctrl-0 = <&tmp105_irq>; - pinctrl-names = "default"; - /* kpd_row0.gpio_178 */ - interrupts-extended = <&gpio6 18 IRQ_TYPE_EDGE_FALLING - &omap4_pmx_core 0x14e>; - interrupt-names = "irq", "wakeup"; - wakeup-source; - }; -}; - -&keypad { - keypad,num-rows = <8>; - keypad,num-columns = <8>; - linux,keymap = < - - /* Row 1 */ - MATRIX_KEY(0, 2, KEY_1) - MATRIX_KEY(0, 6, KEY_2) - MATRIX_KEY(2, 3, KEY_3) - MATRIX_KEY(0, 7, KEY_4) - MATRIX_KEY(0, 4, KEY_5) - MATRIX_KEY(5, 5, KEY_6) - MATRIX_KEY(0, 1, KEY_7) - MATRIX_KEY(0, 5, KEY_8) - MATRIX_KEY(0, 0, KEY_9) - MATRIX_KEY(1, 6, KEY_0) - - /* Row 2 */ - MATRIX_KEY(3, 4, KEY_APOSTROPHE) - MATRIX_KEY(7, 6, KEY_Q) - MATRIX_KEY(7, 7, KEY_W) - MATRIX_KEY(7, 2, KEY_E) - MATRIX_KEY(1, 0, KEY_R) - MATRIX_KEY(4, 4, KEY_T) - MATRIX_KEY(1, 2, KEY_Y) - MATRIX_KEY(6, 7, KEY_U) - MATRIX_KEY(2, 2, KEY_I) - MATRIX_KEY(5, 6, KEY_O) - MATRIX_KEY(3, 7, KEY_P) - MATRIX_KEY(6, 5, KEY_BACKSPACE) - - /* Row 3 */ - MATRIX_KEY(5, 4, KEY_TAB) - MATRIX_KEY(5, 7, KEY_A) - MATRIX_KEY(2, 7, KEY_S) - MATRIX_KEY(7, 0, KEY_D) - MATRIX_KEY(2, 6, KEY_F) - MATRIX_KEY(6, 2, KEY_G) - MATRIX_KEY(6, 6, KEY_H) - MATRIX_KEY(1, 4, KEY_J) - MATRIX_KEY(3, 1, KEY_K) - MATRIX_KEY(2, 1, KEY_L) - MATRIX_KEY(4, 6, KEY_ENTER) - - /* Row 4 */ - MATRIX_KEY(3, 6, KEY_LEFTSHIFT) /* KEY_CAPSLOCK */ - MATRIX_KEY(6, 1, KEY_Z) - MATRIX_KEY(7, 4, KEY_X) - MATRIX_KEY(5, 1, KEY_C) - MATRIX_KEY(1, 7, KEY_V) - MATRIX_KEY(2, 4, KEY_B) - MATRIX_KEY(4, 1, KEY_N) - MATRIX_KEY(1, 1, KEY_M) - MATRIX_KEY(3, 5, KEY_COMMA) - MATRIX_KEY(5, 2, KEY_DOT) - MATRIX_KEY(6, 3, KEY_UP) - MATRIX_KEY(7, 3, KEY_OK) - - /* Row 5 */ - MATRIX_KEY(2, 5, KEY_LEFTCTRL) /* KEY_LEFTSHIFT */ - MATRIX_KEY(4, 5, KEY_LEFTALT) /* SYM */ - MATRIX_KEY(6, 0, KEY_MINUS) - MATRIX_KEY(4, 7, KEY_EQUAL) - MATRIX_KEY(1, 5, KEY_SPACE) - MATRIX_KEY(3, 2, KEY_SLASH) - MATRIX_KEY(4, 3, KEY_LEFT) - MATRIX_KEY(5, 3, KEY_DOWN) - MATRIX_KEY(3, 3, KEY_RIGHT) - - /* Side buttons, KEY_VOLUMEDOWN and KEY_PWER are on CPCAP? */ - MATRIX_KEY(5, 0, KEY_VOLUMEUP) - >; -}; - -&mmc1 { - vmmc-supply = <&vwlan2>; - bus-width = <4>; - cd-gpios = <&gpio6 16 GPIO_ACTIVE_LOW>; /* gpio176 */ -}; - -&mmc2 { - vmmc-supply = <&vsdio>; - bus-width = <8>; - ti,non-removable; -}; - -&mmc3 { - vmmc-supply = <&wl12xx_vmmc>; - /* uart2_tx.sdmmc3_dat1 pad as wakeirq */ - interrupts-extended = <&wakeupgen GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH - &omap4_pmx_core 0xde>; - interrupt-names = "irq", "wakeup"; - non-removable; - bus-width = <4>; - cap-power-off-card; - keep-power-in-suspend; - - #address-cells = <1>; - #size-cells = <0>; - wlcore: wlcore@2 { - compatible = "ti,wl1285", "ti,wl1283"; - reg = <2>; - /* gpio_100 with gpmc_wait2 pad as wakeirq */ - interrupts-extended = <&gpio4 4 IRQ_TYPE_EDGE_RISING>, - <&omap4_pmx_core 0x4e>; - interrupt-names = "irq", "wakeup"; - ref-clock-frequency = <26000000>; - tcxo-clock-frequency = <26000000>; - }; -}; - -&i2c1 { - led-controller@38 { - compatible = "ti,lm3532"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x38>; - - enable-gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>; - - ramp-up-us = <1024>; - ramp-down-us = <8193>; - - led@0 { - reg = <0>; - led-sources = <2>; - ti,led-mode = <0>; - label = ":backlight"; - linux,default-trigger = "backlight"; - }; - - led@1 { - reg = <1>; - led-sources = <1>; - ti,led-mode = <0>; - label = ":kbd_backlight"; - }; - }; -}; - -&i2c2 { - touchscreen@4a { - compatible = "atmel,maxtouch"; - reg = <0x4a>; - pinctrl-names = "default"; - pinctrl-0 = <&touchscreen_pins>; - - reset-gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>; /* gpio173 */ - - /* gpio_183 with sys_nirq2 pad as wakeup */ - interrupts-extended = <&gpio6 23 IRQ_TYPE_EDGE_FALLING>, - <&omap4_pmx_core 0x160>; - interrupt-names = "irq", "wakeup"; - wakeup-source; - }; - - isl29030@44 { - compatible = "isil,isl29030"; - reg = <0x44>; - - pinctrl-names = "default"; - pinctrl-0 = <&als_proximity_pins>; - - interrupt-parent = <&gpio6>; - interrupts = <17 IRQ_TYPE_LEVEL_LOW>; /* gpio177 */ - }; -}; - -&omap4_pmx_core { - - /* hdmi_hpd.gpio_63 */ - hdmi_hpd_gpio: pinmux_hdmi_hpd_pins { - pinctrl-single,pins = < - OMAP4_IOPAD(0x098, PIN_INPUT | MUX_MODE3) - >; - }; - - /* hdmi_cec.hdmi_cec, hdmi_scl.hdmi_scl, hdmi_sda.hdmi_sda */ - dss_hdmi_pins: pinmux_dss_hdmi_pins { - pinctrl-single,pins = < - OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0) - OMAP4_IOPAD(0x09c, PIN_INPUT | MUX_MODE0) - OMAP4_IOPAD(0x09e, PIN_INPUT | MUX_MODE0) - >; - }; - - /* gpmc_ncs0.gpio_50 */ - poweroff_gpio: pinmux_poweroff_pins { - pinctrl-single,pins = < - OMAP4_IOPAD(0x074, PIN_OUTPUT_PULLUP | MUX_MODE3) - >; - }; - - /* kpd_row0.gpio_178 */ - tmp105_irq: pinmux_tmp105_irq { - pinctrl-single,pins = < - OMAP4_IOPAD(0x18e, PIN_INPUT_PULLUP | MUX_MODE3) - >; - }; - - usb_gpio_mux_sel1: pinmux_usb_gpio_mux_sel1_pins { - /* gpio_60 */ - pinctrl-single,pins = < - OMAP4_IOPAD(0x088, PIN_OUTPUT | MUX_MODE3) - >; - }; - - touchscreen_pins: pinmux_touchscreen_pins { - pinctrl-single,pins = < - OMAP4_IOPAD(0x180, PIN_OUTPUT | MUX_MODE3) - OMAP4_IOPAD(0x1a0, PIN_INPUT_PULLUP | MUX_MODE3) - >; - }; - - als_proximity_pins: pinmux_als_proximity_pins { - pinctrl-single,pins = < - OMAP4_IOPAD(0x18c, PIN_INPUT_PULLUP | MUX_MODE3) - >; - }; - - usb_mdm6600_pins: pinmux_usb_mdm6600_pins { - pinctrl-single,pins = < - /* enable 0x4a1000d8 usbb1_ulpitll_dat7.gpio_95 ag16 */ - OMAP4_IOPAD(0x0d8, PIN_INPUT | MUX_MODE3) - - /* power 0x4a10007c gpmc_nwp.gpio_54 c25 */ - OMAP4_IOPAD(0x07c, PIN_OUTPUT | MUX_MODE3) - - /* reset 0x4a100072 gpmc_a25.gpio_49 d20 */ - OMAP4_IOPAD(0x072, PIN_OUTPUT | MUX_MODE3) - - /* mode0/bpwake 0x4a10014e sdmmc5_dat1.gpio_148 af4 */ - OMAP4_IOPAD(0x14e, PIN_OUTPUT | MUX_MODE3) - - /* mode1/apwake 0x4a100150 sdmmc5_dat2.gpio_149 ag3 */ - OMAP4_IOPAD(0x150, PIN_OFF_OUTPUT_LOW | PIN_INPUT | MUX_MODE3) - - /* status0 0x4a10007e gpmc_clk.gpio_55 b22 */ - OMAP4_IOPAD(0x07e, PIN_INPUT | MUX_MODE3) - - /* status1 0x4a10007a gpmc_ncs3.gpio_53 c22 */ - OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3) - - /* status2 0x4a100078 gpmc_ncs2.gpio_52 d21 */ - OMAP4_IOPAD(0x078, PIN_INPUT | MUX_MODE3) - - /* cmd0 0x4a100094 gpmc_ncs6.gpio_103 c24 */ - OMAP4_IOPAD(0x094, PIN_OUTPUT | MUX_MODE3) - - /* cmd1 0x4a100096 gpmc_ncs7.gpio_104 d24 */ - OMAP4_IOPAD(0x096, PIN_OUTPUT | MUX_MODE3) - - /* cmd2 0x4a100142 uart3_rts_sd.gpio_142 f28 */ - OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE3) - >; - }; - - usb_ulpi_pins: pinmux_usb_ulpi_pins { - pinctrl-single,pins = < - OMAP4_IOPAD(0x196, MUX_MODE7) - OMAP4_IOPAD(0x198, MUX_MODE7) - OMAP4_IOPAD(0x1b2, PIN_INPUT_PULLUP | MUX_MODE0) - OMAP4_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE0) - OMAP4_IOPAD(0x1b6, PIN_INPUT_PULLUP | MUX_MODE0) - OMAP4_IOPAD(0x1b8, PIN_INPUT_PULLUP | MUX_MODE0) - OMAP4_IOPAD(0x1ba, PIN_INPUT_PULLUP | MUX_MODE0) - OMAP4_IOPAD(0x1bc, PIN_INPUT_PULLUP | MUX_MODE0) - OMAP4_IOPAD(0x1be, PIN_INPUT_PULLUP | MUX_MODE0) - OMAP4_IOPAD(0x1c0, PIN_INPUT_PULLUP | MUX_MODE0) - OMAP4_IOPAD(0x1c2, PIN_INPUT_PULLUP | MUX_MODE0) - OMAP4_IOPAD(0x1c4, PIN_INPUT_PULLUP | MUX_MODE0) - OMAP4_IOPAD(0x1c6, PIN_INPUT_PULLUP | MUX_MODE0) - OMAP4_IOPAD(0x1c8, PIN_INPUT_PULLUP | MUX_MODE0) - >; - }; - - /* usb0_otg_dp and usb0_otg_dm */ - usb_utmi_pins: pinmux_usb_utmi_pins { - pinctrl-single,pins = < - OMAP4_IOPAD(0x196, PIN_INPUT | MUX_MODE0) - OMAP4_IOPAD(0x198, PIN_INPUT | MUX_MODE0) - OMAP4_IOPAD(0x1b2, PIN_INPUT_PULLUP | MUX_MODE7) - OMAP4_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE7) - OMAP4_IOPAD(0x1b6, PIN_INPUT_PULLUP | MUX_MODE7) - OMAP4_IOPAD(0x1b8, PIN_INPUT_PULLUP | MUX_MODE7) - OMAP4_IOPAD(0x1ba, PIN_INPUT_PULLUP | MUX_MODE7) - OMAP4_IOPAD(0x1bc, PIN_INPUT_PULLUP | MUX_MODE7) - OMAP4_IOPAD(0x1be, PIN_INPUT_PULLUP | MUX_MODE7) - OMAP4_IOPAD(0x1c0, PIN_INPUT_PULLUP | MUX_MODE7) - OMAP4_IOPAD(0x1c2, PIN_INPUT_PULLUP | MUX_MODE7) - OMAP4_IOPAD(0x1c4, PIN_INPUT_PULLUP | MUX_MODE7) - OMAP4_IOPAD(0x1c6, PIN_INPUT_PULLUP | MUX_MODE7) - OMAP4_IOPAD(0x1c8, PIN_INPUT_PULLUP | MUX_MODE7) - >; - }; - - /* - * Note that the v3.0.8 stock userspace dynamically remuxes uart1 - * rts pin probably for PM purposes to PIN_INPUT_PULLUP | MUX_MODE7 - * when not used. If needed, we can add rts pin remux later based - * on power measurements. - */ - uart1_pins: pinmux_uart1_pins { - pinctrl-single,pins = < - /* 0x4a10013c mcspi1_cs2.uart1_cts ag23 */ - OMAP4_IOPAD(0x13c, PIN_INPUT_PULLUP | MUX_MODE1) - - /* 0x4a10013e mcspi1_cs3.uart1_rts ah23 */ - OMAP4_IOPAD(0x13e, MUX_MODE1) - - /* 0x4a100140 uart3_cts_rctx.uart1_tx f27 */ - OMAP4_IOPAD(0x140, PIN_OUTPUT | MUX_MODE1) - - /* 0x4a1001ca dpm_emu14.uart1_rx aa3 */ - OMAP4_IOPAD(0x1ca, PIN_INPUT_PULLUP | MUX_MODE2) - >; - }; - - /* uart3_tx_irtx and uart3_rx_irrx */ - uart3_pins: pinmux_uart3_pins { - pinctrl-single,pins = < - OMAP4_IOPAD(0x196, MUX_MODE7) - OMAP4_IOPAD(0x198, MUX_MODE7) - OMAP4_IOPAD(0x1b2, PIN_INPUT_PULLUP | MUX_MODE7) - OMAP4_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE7) - OMAP4_IOPAD(0x1b6, PIN_INPUT_PULLUP | MUX_MODE7) - OMAP4_IOPAD(0x1b8, PIN_INPUT_PULLUP | MUX_MODE7) - OMAP4_IOPAD(0x1ba, MUX_MODE2) - OMAP4_IOPAD(0x1bc, PIN_INPUT | MUX_MODE2) - OMAP4_IOPAD(0x1be, PIN_INPUT_PULLUP | MUX_MODE7) - OMAP4_IOPAD(0x1c0, PIN_INPUT_PULLUP | MUX_MODE7) - OMAP4_IOPAD(0x1c2, PIN_INPUT_PULLUP | MUX_MODE7) - OMAP4_IOPAD(0x1c4, PIN_INPUT_PULLUP | MUX_MODE7) - OMAP4_IOPAD(0x1c6, PIN_INPUT_PULLUP | MUX_MODE7) - OMAP4_IOPAD(0x1c8, PIN_INPUT_PULLUP | MUX_MODE7) - >; - }; - - uart4_pins: pinmux_uart4_pins { - pinctrl-single,pins = < - OMAP4_IOPAD(0x15c, PIN_INPUT | MUX_MODE0) /* uart4_rx */ - OMAP4_IOPAD(0x15e, PIN_OUTPUT | MUX_MODE0) /* uart4_tx */ - OMAP4_IOPAD(0x110, PIN_INPUT_PULLUP | MUX_MODE5) /* uart4_cts */ - OMAP4_IOPAD(0x112, PIN_OUTPUT_PULLUP | MUX_MODE5) /* uart4_rts */ - >; - }; - - mcbsp2_pins: pinmux_mcbsp2_pins { - pinctrl-single,pins = < - OMAP4_IOPAD(0x0f6, PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_clkx */ - OMAP4_IOPAD(0x0f8, PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_dr */ - OMAP4_IOPAD(0x0fa, PIN_OUTPUT | MUX_MODE0) /* abe_mcbsp2_dx */ - OMAP4_IOPAD(0x0fc, PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_fsx */ - >; - }; - - mcbsp3_pins: pinmux_mcbsp3_pins { - pinctrl-single,pins = < - OMAP4_IOPAD(0x106, PIN_INPUT | MUX_MODE1) /* abe_mcbsp3_dr */ - OMAP4_IOPAD(0x108, PIN_OUTPUT | MUX_MODE1) /* abe_mcbsp3_dx */ - OMAP4_IOPAD(0x10a, PIN_INPUT | MUX_MODE1) /* abe_mcbsp3_clkx */ - OMAP4_IOPAD(0x10c, PIN_INPUT | MUX_MODE1) /* abe_mcbsp3_fsx */ - >; - }; - - vibrator_direction_pin: pinmux_vibrator_direction_pin { - pinctrl-single,pins = < - OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE1) /* dmtimer8_pwm_evt (gpio_27) */ - >; - }; - - vibrator_enable_pin: pinmux_vibrator_enable_pin { - pinctrl-single,pins = < - OMAP4_IOPAD(0X1d0, PIN_OUTPUT | MUX_MODE1) /* dmtimer9_pwm_evt (gpio_28) */ - >; - }; -}; - -&omap4_pmx_wkup { - usb_gpio_mux_sel2: pinmux_usb_gpio_mux_sel2_pins { - /* gpio_wk0 */ - pinctrl-single,pins = < - OMAP4_IOPAD(0x040, PIN_OUTPUT_PULLDOWN | MUX_MODE3) - >; - }; -}; - -/* Configure pwm clock source for timers 8 & 9 */ -&timer8 { - assigned-clocks = <&abe_clkctrl OMAP4_TIMER8_CLKCTRL 24>; - assigned-clock-parents = <&sys_clkin_ck>; -}; - -&timer9 { - assigned-clocks = <&l4_per_clkctrl OMAP4_TIMER9_CLKCTRL 24>; - assigned-clock-parents = <&sys_clkin_ck>; -}; - -/* - * As uart1 is wired to mdm6600 with rts and cts, we can use the cts pin for - * uart1 wakeirq. - */ -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins>; - interrupts-extended = <&wakeupgen GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH - &omap4_pmx_core 0xfc>; -}; - -&uart3 { - interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH - &omap4_pmx_core 0x17c>; -}; - -&uart4 { - pinctrl-names = "default"; - pinctrl-0 = <&uart4_pins>; - - bluetooth { - compatible = "ti,wl1285-st"; - enable-gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>; /* gpio 174 */ - max-speed = <3686400>; - }; -}; - -&usbhsohci { - phys = <&fsusb1_phy>; - phy-names = "usb"; -}; - -&usbhsehci { - phys = <&hsusb2_phy>; -}; - -&usbhshost { - port1-mode = "ohci-phy-4pin-dpdm"; - port2-mode = "ehci-tll"; -}; - -/* Internal UTMI+ PHY used for OTG, CPCAP ULPI PHY for detection and charger */ -&usb_otg_hs { - interface-type = <1>; - mode = <3>; - power = <50>; -}; - -&i2c4 { - ak8975: magnetometer@c { - compatible = "asahi-kasei,ak8975"; - reg = <0x0c>; - - vdd-supply = <&vhvio>; - - interrupt-parent = <&gpio6>; - interrupts = <15 IRQ_TYPE_EDGE_RISING>; /* gpio175 */ - - rotation-matrix = "-1", "0", "0", - "0", "1", "0", - "0", "0", "-1"; - - }; - - lis3dh: accelerometer@18 { - compatible = "st,lis3dh-accel"; - reg = <0x18>; - - vdd-supply = <&vhvio>; - - interrupt-parent = <&gpio2>; - interrupts = <2 IRQ_TYPE_EDGE_BOTH>; /* gpio34 */ - - rotation-matrix = "0", "-1", "0", - "1", "0", "0", - "0", "0", "1"; - }; -}; - -&mcbsp2 { - #sound-dai-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&mcbsp2_pins>; - status = "okay"; - - mcbsp2_port: port { - cpu_dai2: endpoint { - dai-format = "i2s"; - remote-endpoint = <&cpcap_audio_codec0>; - frame-master = <&cpcap_audio_codec0>; - bitclock-master = <&cpcap_audio_codec0>; - }; - }; -}; - -&mcbsp3 { - #sound-dai-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&mcbsp3_pins>; - status = "okay"; - - mcbsp3_port: port { - cpu_dai3: endpoint { - dai-format = "dsp_a"; - frame-master = <&cpcap_audio_codec1>; - bitclock-master = <&cpcap_audio_codec1>; - remote-endpoint = <&cpcap_audio_codec1>; - }; - }; -}; - -&cpcap_audio_codec0 { - remote-endpoint = <&cpu_dai2>; -}; - -&cpcap_audio_codec1 { - remote-endpoint = <&cpu_dai3>; }; diff --git a/arch/arm/boot/dts/omap4-l4-abe.dtsi b/arch/arm/boot/dts/omap4-l4-abe.dtsi index 67072df39bc7..a6feb201c569 100644 --- a/arch/arm/boot/dts/omap4-l4-abe.dtsi +++ b/arch/arm/boot/dts/omap4-l4-abe.dtsi @@ -86,7 +86,6 @@ target-module@22000 { /* 0x40122000, ap 2 02.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "mcbsp1"; reg = <0x2208c 0x4>; reg-names = "sysc"; ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | @@ -120,7 +119,6 @@ target-module@24000 { /* 0x40124000, ap 4 04.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "mcbsp2"; reg = <0x2408c 0x4>; reg-names = "sysc"; ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | @@ -154,7 +152,6 @@ target-module@26000 { /* 0x40126000, ap 6 06.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "mcbsp3"; reg = <0x2608c 0x4>; reg-names = "sysc"; ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | @@ -188,7 +185,6 @@ target-module@28000 { /* 0x40128000, ap 8 08.0 */ compatible = "ti,sysc-mcasp", "ti,sysc"; - ti,hwmods = "mcasp"; reg = <0x28000 0x4>, <0x28004 0x4>; reg-names = "rev", "sysc"; @@ -223,7 +219,6 @@ target-module@2e000 { /* 0x4012e000, ap 12 0c.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "dmic"; reg = <0x2e000 0x4>, <0x2e010 0x4>; reg-names = "rev", "sysc"; @@ -255,7 +250,6 @@ target-module@30000 { /* 0x40130000, ap 14 0e.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "wd_timer3"; reg = <0x30000 0x4>, <0x30010 0x4>, <0x30014 0x4>; @@ -284,7 +278,6 @@ mcpdm_module: target-module@32000 { /* 0x40132000, ap 16 10.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mcpdm"; reg = <0x32000 0x4>, <0x32010 0x4>; reg-names = "rev", "sysc"; @@ -319,7 +312,6 @@ target-module@38000 { /* 0x40138000, ap 18 12.0 */ compatible = "ti,sysc-omap4-timer", "ti,sysc"; - ti,hwmods = "timer5"; reg = <0x38000 0x4>, <0x38010 0x4>; reg-names = "rev", "sysc"; @@ -350,7 +342,6 @@ target-module@3a000 { /* 0x4013a000, ap 20 14.0 */ compatible = "ti,sysc-omap4-timer", "ti,sysc"; - ti,hwmods = "timer6"; reg = <0x3a000 0x4>, <0x3a010 0x4>; reg-names = "rev", "sysc"; @@ -381,7 +372,6 @@ target-module@3c000 { /* 0x4013c000, ap 22 16.0 */ compatible = "ti,sysc-omap4-timer", "ti,sysc"; - ti,hwmods = "timer7"; reg = <0x3c000 0x4>, <0x3c010 0x4>; reg-names = "rev", "sysc"; @@ -412,7 +402,6 @@ target-module@3e000 { /* 0x4013e000, ap 24 18.0 */ compatible = "ti,sysc-omap4-timer", "ti,sysc"; - ti,hwmods = "timer8"; reg = <0x3e000 0x4>, <0x3e010 0x4>; reg-names = "rev", "sysc"; @@ -471,7 +460,6 @@ target-module@f1000 { /* 0x401f1000, ap 32 20.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "aess"; reg = <0xf1000 0x4>, <0xf1010 0x4>; reg-names = "rev", "sysc"; diff --git a/arch/arm/boot/dts/omap4-l4.dtsi b/arch/arm/boot/dts/omap4-l4.dtsi index bea05dc4ef0f..459fd7027591 100644 --- a/arch/arm/boot/dts/omap4-l4.dtsi +++ b/arch/arm/boot/dts/omap4-l4.dtsi @@ -136,7 +136,6 @@ target-module@56000 { /* 0x4a056000, ap 7 0a.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "dma_system"; reg = <0x56000 0x4>, <0x5602c 0x4>, <0x56028 0x4>; @@ -160,7 +159,7 @@ ranges = <0x0 0x56000 0x1000>; sdma: dma-controller@0 { - compatible = "ti,omap4430-sdma"; + compatible = "ti,omap4430-sdma", "ti,omap-sdma"; reg = <0x0 0x1000>; interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, @@ -174,7 +173,6 @@ target-module@58000 { /* 0x4a058000, ap 10 0e.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "hsi"; reg = <0x58000 0x4>, <0x58010 0x4>, <0x58014 0x4>; @@ -321,7 +319,6 @@ target-module@66000 { /* 0x4a066000, ap 25 26.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "mmu_dsp"; reg = <0x66000 0x4>, <0x66010 0x4>, <0x66014 0x4>; @@ -335,12 +332,18 @@ /* Domains (V, P, C): iva, tesla_pwrdm, tesla_clkdm */ clocks = <&tesla_clkctrl OMAP4_DSP_CLKCTRL 0>; clock-names = "fck"; + resets = <&prm_tesla 1>; + reset-names = "rstctrl"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x66000 0x1000>; - /* mmu_dsp cannot be moved before reset driver */ - status = "disabled"; + mmu_dsp: mmu@0 { + compatible = "ti,omap4-iommu"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <0>; + }; }; }; @@ -381,7 +384,6 @@ target-module@2b000 { /* 0x4a0ab000, ap 84 12.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "usb_otg_hs"; reg = <0x2b400 0x4>, <0x2b404 0x4>, <0x2b408 0x4>; @@ -421,7 +423,6 @@ target-module@2d000 { /* 0x4a0ad000, ap 88 0c.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "ocp2scp_usb_phy"; reg = <0x2d000 0x4>, <0x2d010 0x4>, <0x2d014 0x4>; @@ -456,17 +457,43 @@ }; }; + /* d2d mdm */ target-module@36000 { /* 0x4a0b6000, ap 69 60.0 */ - compatible = "ti,sysc"; - status = "disabled"; + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x36000 0x4>, + <0x36010 0x4>, + <0x36014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, core_pwrdm, d2d_clkdm */ + clocks = <&d2d_clkctrl OMAP4_C2C_CLKCTRL 0>; + clock-names = "fck"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x36000 0x1000>; }; + /* d2d mpu */ target-module@4d000 { /* 0x4a0cd000, ap 78 58.0 */ - compatible = "ti,sysc"; - status = "disabled"; + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x4d000 0x4>, + <0x4d010 0x4>, + <0x4d014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, core_pwrdm, d2d_clkdm */ + clocks = <&d2d_clkctrl OMAP4_C2C_CLKCTRL 0>; + clock-names = "fck"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x4d000 0x1000>; @@ -474,7 +501,6 @@ target-module@59000 { /* 0x4a0d9000, ap 13 1a.0 */ compatible = "ti,sysc-omap4-sr", "ti,sysc"; - ti,hwmods = "smartreflex_mpu"; reg = <0x59038 0x4>; reg-names = "sysc"; ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>; @@ -498,7 +524,6 @@ target-module@5b000 { /* 0x4a0db000, ap 15 08.0 */ compatible = "ti,sysc-omap4-sr", "ti,sysc"; - ti,hwmods = "smartreflex_iva"; reg = <0x5b038 0x4>; reg-names = "sysc"; ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>; @@ -522,7 +547,6 @@ target-module@5d000 { /* 0x4a0dd000, ap 17 22.0 */ compatible = "ti,sysc-omap4-sr", "ti,sysc"; - ti,hwmods = "smartreflex_core"; reg = <0x5d038 0x4>; reg-names = "sysc"; ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>; @@ -554,7 +578,6 @@ target-module@74000 { /* 0x4a0f4000, ap 27 24.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mailbox"; reg = <0x74000 0x4>, <0x74010 0x4>; reg-names = "rev", "sysc"; @@ -589,7 +612,6 @@ target-module@76000 { /* 0x4a0f6000, ap 29 3a.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "spinlock"; reg = <0x76000 0x4>, <0x76010 0x4>, <0x76014 0x4>; @@ -697,7 +719,6 @@ target-module@a000 { /* 0x4a10a000, ap 65 50.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "fdif"; reg = <0xa000 0x4>, <0xa010 0x4>; reg-names = "rev", "sysc"; @@ -981,7 +1002,7 @@ ranges = <0x0 0x6000 0x2000>; prm: prm@0 { - compatible = "ti,omap4-prm"; + compatible = "ti,omap4-prm", "simple-bus"; reg = <0x0 0x2000>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -1059,7 +1080,6 @@ gpio1_target: target-module@0 { /* 0x4a310000, ap 5 14.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "gpio1"; reg = <0x0 0x4>, <0x10 0x4>, <0x114 0x4>; @@ -1094,7 +1114,6 @@ target-module@4000 { /* 0x4a314000, ap 7 18.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "wd_timer2"; reg = <0x4000 0x4>, <0x4010 0x4>, <0x4014 0x4>; @@ -1155,7 +1174,6 @@ target-module@c000 { /* 0x4a31c000, ap 11 20.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "kbd"; reg = <0xc000 0x4>, <0xc010 0x4>, <0xc014 0x4>; @@ -1400,7 +1418,6 @@ target-module@32000 { /* 0x48032000, ap 5 02.0 */ compatible = "ti,sysc-omap2-timer", "ti,sysc"; - ti,hwmods = "timer2"; reg = <0x32000 0x4>, <0x32010 0x4>, <0x32014 0x4>; @@ -1432,7 +1449,6 @@ target-module@34000 { /* 0x48034000, ap 7 04.0 */ compatible = "ti,sysc-omap4-timer", "ti,sysc"; - ti,hwmods = "timer3"; reg = <0x34000 0x4>, <0x34010 0x4>; reg-names = "rev", "sysc"; @@ -1460,7 +1476,6 @@ target-module@36000 { /* 0x48036000, ap 9 0e.0 */ compatible = "ti,sysc-omap4-timer", "ti,sysc"; - ti,hwmods = "timer4"; reg = <0x36000 0x4>, <0x36010 0x4>; reg-names = "rev", "sysc"; @@ -1488,7 +1503,6 @@ target-module@3e000 { /* 0x4803e000, ap 11 08.0 */ compatible = "ti,sysc-omap4-timer", "ti,sysc"; - ti,hwmods = "timer9"; reg = <0x3e000 0x4>, <0x3e010 0x4>; reg-names = "rev", "sysc"; @@ -1525,7 +1539,6 @@ target-module@55000 { /* 0x48055000, ap 15 0c.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "gpio2"; reg = <0x55000 0x4>, <0x55010 0x4>, <0x55114 0x4>; @@ -1559,7 +1572,6 @@ target-module@57000 { /* 0x48057000, ap 17 16.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "gpio3"; reg = <0x57000 0x4>, <0x57010 0x4>, <0x57114 0x4>; @@ -1593,7 +1605,6 @@ target-module@59000 { /* 0x48059000, ap 19 10.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "gpio4"; reg = <0x59000 0x4>, <0x59010 0x4>, <0x59114 0x4>; @@ -1627,7 +1638,6 @@ target-module@5b000 { /* 0x4805b000, ap 21 12.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "gpio5"; reg = <0x5b000 0x4>, <0x5b010 0x4>, <0x5b114 0x4>; @@ -1661,7 +1671,6 @@ target-module@5d000 { /* 0x4805d000, ap 23 14.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "gpio6"; reg = <0x5d000 0x4>, <0x5d010 0x4>, <0x5d114 0x4>; @@ -1695,7 +1704,6 @@ target-module@60000 { /* 0x48060000, ap 25 1e.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "i2c3"; reg = <0x60000 0x8>, <0x60010 0x8>, <0x60090 0x8>; @@ -1814,7 +1822,6 @@ target-module@70000 { /* 0x48070000, ap 32 28.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "i2c1"; reg = <0x70000 0x8>, <0x70010 0x8>, <0x70090 0x8>; @@ -1846,7 +1853,6 @@ target-module@72000 { /* 0x48072000, ap 34 30.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "i2c2"; reg = <0x72000 0x8>, <0x72010 0x8>, <0x72090 0x8>; @@ -1878,7 +1884,6 @@ target-module@76000 { /* 0x48076000, ap 39 38.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "slimbus2"; reg = <0x76000 0x4>, <0x76010 0x4>; reg-names = "rev", "sysc"; @@ -1899,7 +1904,6 @@ target-module@78000 { /* 0x48078000, ap 41 1a.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "elm"; reg = <0x78000 0x4>, <0x78010 0x4>, <0x78014 0x4>; @@ -1928,7 +1932,6 @@ target-module@86000 { /* 0x48086000, ap 43 24.0 */ compatible = "ti,sysc-omap2-timer", "ti,sysc"; - ti,hwmods = "timer10"; reg = <0x86000 0x4>, <0x86010 0x4>, <0x86014 0x4>; @@ -1961,7 +1964,6 @@ target-module@88000 { /* 0x48088000, ap 45 2e.0 */ compatible = "ti,sysc-omap4-timer", "ti,sysc"; - ti,hwmods = "timer11"; reg = <0x88000 0x4>, <0x88010 0x4>; reg-names = "rev", "sysc"; @@ -1988,17 +1990,30 @@ }; }; - target-module@90000 { /* 0x48090000, ap 57 2a.0 */ - compatible = "ti,sysc"; - status = "disabled"; + rng_target: target-module@90000 { /* 0x48090000, ap 57 2a.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x91fe0 0x4>, + <0x91fe4 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>; + /* Domains (P, C): l4per_pwrdm, l4_secure_clkdm */ + clocks = <&l4_secure_clkctrl OMAP4_RNG_CLKCTRL 0>; + clock-names = "fck"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x90000 0x2000>; + + rng: rng@0 { + compatible = "ti,omap4-rng"; + reg = <0x0 0x2000>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; + }; }; target-module@96000 { /* 0x48096000, ap 37 26.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "mcbsp4"; reg = <0x9608c 0x4>; reg-names = "sysc"; ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | @@ -2030,7 +2045,6 @@ target-module@98000 { /* 0x48098000, ap 49 22.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mcspi1"; reg = <0x98000 0x4>, <0x98010 0x4>; reg-names = "rev", "sysc"; @@ -2069,7 +2083,6 @@ target-module@9a000 { /* 0x4809a000, ap 51 2c.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mcspi2"; reg = <0x9a000 0x4>, <0x9a010 0x4>; reg-names = "rev", "sysc"; @@ -2160,6 +2173,35 @@ <0x00001000 0x000a5000 0x00001000>; }; + des_target: target-module@a5000 { /* 0x480a5000 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0xa5030 0x4>, + <0xa5034 0x4>, + <0xa5038 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): l4per_pwrdm, l4_secure_clkdm */ + clocks = <&l4_secure_clkctrl OMAP4_DES3DES_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xa5000 0x00001000>; + + des: des@0 { + compatible = "ti,omap4-des"; + reg = <0 0xa0>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 117>, <&sdma 116>; + dma-names = "tx", "rx"; + }; + }; + target-module@a8000 { /* 0x480a8000, ap 61 3e.0 */ compatible = "ti,sysc"; status = "disabled"; @@ -2210,7 +2252,6 @@ target-module@b2000 { /* 0x480b2000, ap 65 3c.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "hdq1w"; reg = <0xb2000 0x4>, <0xb2014 0x4>, <0xb2018 0x4>; @@ -2267,7 +2308,6 @@ target-module@b8000 { /* 0x480b8000, ap 69 58.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mcspi3"; reg = <0xb8000 0x4>, <0xb8010 0x4>; reg-names = "rev", "sysc"; @@ -2298,7 +2338,6 @@ target-module@ba000 { /* 0x480ba000, ap 71 32.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mcspi4"; reg = <0xba000 0x4>, <0xba010 0x4>; reg-names = "rev", "sysc"; @@ -2401,7 +2440,6 @@ target-module@150000 { /* 0x48350000, ap 77 4c.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "i2c4"; reg = <0x150000 0x8>, <0x150010 0x8>, <0x150090 0x8>; diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi index 14be2ecb62b1..55ea8b6189af 100644 --- a/arch/arm/boot/dts/omap4-panda-common.dtsi +++ b/arch/arm/boot/dts/omap4-panda-common.dtsi @@ -474,7 +474,7 @@ compatible = "ti,wl1271"; reg = <2>; /* gpio_53 with gpmc_ncs3 pad as wakeup */ - interrupts-extended = <&gpio2 21 IRQ_TYPE_EDGE_RISING>, + interrupts-extended = <&gpio2 21 IRQ_TYPE_LEVEL_HIGH>, <&omap4_pmx_core 0x3a>; interrupt-names = "irq", "wakeup"; ref-clock-frequency = <38400000>; diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index 3c274965ff40..91480ac1f328 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -512,7 +512,7 @@ compatible = "ti,wl1281"; reg = <2>; interrupt-parent = <&gpio1>; - interrupts = <21 IRQ_TYPE_EDGE_RISING>; /* gpio 53 */ + interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; /* gpio 53 */ ref-clock-frequency = <26000000>; tcxo-clock-frequency = <26000000>; }; diff --git a/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi b/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi index 6dbbc9b3229c..d0032213101e 100644 --- a/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi +++ b/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi @@ -69,7 +69,7 @@ compatible = "ti,wl1271"; reg = <2>; interrupt-parent = <&gpio2>; - interrupts = <9 IRQ_TYPE_EDGE_RISING>; /* gpio 41 */ + interrupts = <9 IRQ_TYPE_LEVEL_HIGH>; /* gpio 41 */ ref-clock-frequency = <38400000>; }; }; diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index c43e52fd5f65..9a87440d0b9d 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -148,7 +148,7 @@ l4_abe: interconnect@40100000 { }; - ocmcram: ocmcram@40304000 { + ocmcram: sram@40304000 { compatible = "mmio-sram"; reg = <0x40304000 0xa000>; /* 40k */ }; @@ -173,14 +173,6 @@ #gpio-cells = <2>; }; - mmu_dsp: mmu@4a066000 { - compatible = "ti,omap4-iommu"; - reg = <0x4a066000 0x100>; - interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "mmu_dsp"; - #iommu-cells = <0>; - }; - target-module@52000000 { compatible = "ti,sysc-omap4", "ti,sysc"; ti,hwmods = "iss"; @@ -206,17 +198,37 @@ /* No child device binding, driver in staging */ }; - mmu_ipu: mmu@55082000 { - compatible = "ti,omap4-iommu"; - reg = <0x55082000 0x100>; - interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "mmu_ipu"; - #iommu-cells = <0>; - ti,iommu-bus-err-back; + target-module@55082000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x55082000 0x4>, + <0x55082010 0x4>, + <0x55082014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + clocks = <&ducati_clkctrl OMAP4_IPU_CLKCTRL 0>; + clock-names = "fck"; + resets = <&prm_core 2>; + reset-names = "rstctrl"; + ranges = <0x0 0x55082000 0x100>; + #size-cells = <1>; + #address-cells = <1>; + + mmu_ipu: mmu@0 { + compatible = "ti,omap4-iommu"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <0>; + ti,iommu-bus-err-back; + }; }; + target-module@4012c000 { compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "slimbus1"; reg = <0x4012c000 0x4>, <0x4012c010 0x4>; reg-names = "rev", "sysc"; @@ -266,40 +278,90 @@ hw-caps-temp-alert; }; - aes1: aes@4b501000 { - compatible = "ti,omap4-aes"; - ti,hwmods = "aes1"; - reg = <0x4b501000 0xa0>; - interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&sdma 111>, <&sdma 110>; - dma-names = "tx", "rx"; - }; - - aes2: aes@4b701000 { - compatible = "ti,omap4-aes"; - ti,hwmods = "aes2"; - reg = <0x4b701000 0xa0>; - interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&sdma 114>, <&sdma 113>; - dma-names = "tx", "rx"; + aes1_target: target-module@4b501000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x4b501080 0x4>, + <0x4b501084 0x4>, + <0x4b501088 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): l4per_pwrdm, l4_secure_clkdm */ + clocks = <&l4_secure_clkctrl OMAP4_AES1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4b501000 0x1000>; + + aes1: aes@0 { + compatible = "ti,omap4-aes"; + reg = <0 0xa0>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 111>, <&sdma 110>; + dma-names = "tx", "rx"; + }; }; - des: des@480a5000 { - compatible = "ti,omap4-des"; - ti,hwmods = "des"; - reg = <0x480a5000 0xa0>; - interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&sdma 117>, <&sdma 116>; - dma-names = "tx", "rx"; + aes2_target: target-module@4b701000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x4b701080 0x4>, + <0x4b701084 0x4>, + <0x4b701088 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): l4per_pwrdm, l4_secure_clkdm */ + clocks = <&l4_secure_clkctrl OMAP4_AES2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4b701000 0x1000>; + + aes2: aes@0 { + compatible = "ti,omap4-aes"; + reg = <0 0xa0>; + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 114>, <&sdma 113>; + dma-names = "tx", "rx"; + }; }; - sham: sham@4b100000 { - compatible = "ti,omap4-sham"; - ti,hwmods = "sham"; - reg = <0x4b100000 0x300>; - interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&sdma 119>; - dma-names = "rx"; + sham_target: target-module@4b100000 { + compatible = "ti,sysc-omap3-sham", "ti,sysc"; + reg = <0x4b100100 0x4>, + <0x4b100110 0x4>, + <0x4b100114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (P, C): l4per_pwrdm, l4_secure_clkdm */ + clocks = <&l4_secure_clkctrl OMAP4_SHA2MD5_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4b100000 0x1000>; + + sham: sham@0 { + compatible = "ti,omap4-sham"; + reg = <0 0x300>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 119>; + dma-names = "rx"; + }; }; abb_mpu: regulator-abb-mpu { @@ -330,9 +392,8 @@ target-module@56000000 { compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "gpu"; - reg = <0x5601fc00 0x4>, - <0x5601fc10 0x4>; + reg = <0x5600fe00 0x4>, + <0x5600fe10 0x4>; reg-names = "rev", "sysc"; ti,sysc-midle = <SYSC_IDLE_FORCE>, <SYSC_IDLE_NO>, @@ -443,3 +504,29 @@ #include "omap4-l4.dtsi" #include "omap4-l4-abe.dtsi" #include "omap44xx-clocks.dtsi" + +&prm { + prm_tesla: prm@400 { + compatible = "ti,omap4-prm-inst", "ti,omap-prm-inst"; + reg = <0x400 0x100>; + #reset-cells = <1>; + }; + + prm_core: prm@700 { + compatible = "ti,omap4-prm-inst", "ti,omap-prm-inst"; + reg = <0x700 0x100>; + #reset-cells = <1>; + }; + + prm_ivahd: prm@f00 { + compatible = "ti,omap4-prm-inst", "ti,omap-prm-inst"; + reg = <0xf00 0x100>; + #reset-cells = <1>; + }; + + prm_device: prm@1b00 { + compatible = "ti,omap4-prm-inst", "ti,omap-prm-inst"; + reg = <0x1b00 0x40>; + #reset-cells = <1>; + }; +}; diff --git a/arch/arm/boot/dts/omap44xx-clocks.dtsi b/arch/arm/boot/dts/omap44xx-clocks.dtsi index e9d9c8460682..532868591107 100644 --- a/arch/arm/boot/dts/omap44xx-clocks.dtsi +++ b/arch/arm/boot/dts/omap44xx-clocks.dtsi @@ -1279,13 +1279,18 @@ #size-cells = <1>; ranges = <0 0x1400 0x200>; - l4_per_clkctrl: clk@20 { - compatible = "ti,clkctrl"; + l4_per_clkctrl: clock@20 { + compatible = "ti,clkctrl-l4-per", "ti,clkctrl"; reg = <0x20 0x144>; #clock-cells = <2>; }; - }; + l4_secure_clkctrl: clock@1a0 { + compatible = "ti,clkctrl-l4-secure", "ti,clkctrl"; + reg = <0x1a0 0x3c>; + #clock-cells = <2>; + }; + }; }; &prm { diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi index 7fff555ee394..68ac04641bdb 100644 --- a/arch/arm/boot/dts/omap5-board-common.dtsi +++ b/arch/arm/boot/dts/omap5-board-common.dtsi @@ -362,7 +362,7 @@ pinctrl-names = "default"; pinctrl-0 = <&wlcore_irq_pin>; interrupt-parent = <&gpio1>; - interrupts = <14 IRQ_TYPE_EDGE_RISING>; /* gpio 14 */ + interrupts = <14 IRQ_TYPE_LEVEL_HIGH>; /* gpio 14 */ ref-clock-frequency = <26000000>; }; }; diff --git a/arch/arm/boot/dts/omap5-l4-abe.dtsi b/arch/arm/boot/dts/omap5-l4-abe.dtsi index dc9d0532f4cf..4ec7909df78b 100644 --- a/arch/arm/boot/dts/omap5-l4-abe.dtsi +++ b/arch/arm/boot/dts/omap5-l4-abe.dtsi @@ -86,7 +86,6 @@ target-module@22000 { /* 0x40122000, ap 2 02.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "mcbsp1"; reg = <0x2208c 0x4>; reg-names = "sysc"; ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | @@ -120,7 +119,6 @@ target-module@24000 { /* 0x40124000, ap 4 04.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "mcbsp2"; reg = <0x2408c 0x4>; reg-names = "sysc"; ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | @@ -154,7 +152,6 @@ target-module@26000 { /* 0x40126000, ap 6 06.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "mcbsp3"; reg = <0x2608c 0x4>; reg-names = "sysc"; ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | @@ -206,7 +203,6 @@ target-module@2e000 { /* 0x4012e000, ap 12 0c.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "dmic"; reg = <0x2e000 0x4>, <0x2e010 0x4>; reg-names = "rev", "sysc"; @@ -247,7 +243,6 @@ mcpdm_module: target-module@32000 { /* 0x40132000, ap 16 10.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mcpdm"; reg = <0x32000 0x4>, <0x32010 0x4>; reg-names = "rev", "sysc"; @@ -282,7 +277,6 @@ target-module@38000 { /* 0x40138000, ap 18 12.0 */ compatible = "ti,sysc-omap4-timer", "ti,sysc"; - ti,hwmods = "timer5"; reg = <0x38000 0x4>, <0x38010 0x4>; reg-names = "rev", "sysc"; @@ -314,7 +308,6 @@ target-module@3a000 { /* 0x4013a000, ap 20 14.0 */ compatible = "ti,sysc-omap4-timer", "ti,sysc"; - ti,hwmods = "timer6"; reg = <0x3a000 0x4>, <0x3a010 0x4>; reg-names = "rev", "sysc"; @@ -346,7 +339,6 @@ target-module@3c000 { /* 0x4013c000, ap 22 16.0 */ compatible = "ti,sysc-omap4-timer", "ti,sysc"; - ti,hwmods = "timer7"; reg = <0x3c000 0x4>, <0x3c010 0x4>; reg-names = "rev", "sysc"; @@ -377,7 +369,6 @@ target-module@3e000 { /* 0x4013e000, ap 24 18.0 */ compatible = "ti,sysc-omap4-timer", "ti,sysc"; - ti,hwmods = "timer8"; reg = <0x3e000 0x4>, <0x3e010 0x4>; reg-names = "rev", "sysc"; diff --git a/arch/arm/boot/dts/omap5-l4.dtsi b/arch/arm/boot/dts/omap5-l4.dtsi index 0960348002ad..f68740abb8aa 100644 --- a/arch/arm/boot/dts/omap5-l4.dtsi +++ b/arch/arm/boot/dts/omap5-l4.dtsi @@ -213,7 +213,6 @@ target-module@56000 { /* 0x4a056000, ap 7 02.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "dma_system"; reg = <0x56000 0x4>, <0x5602c 0x4>, <0x56028 0x4>; @@ -237,7 +236,7 @@ ranges = <0x0 0x56000 0x1000>; sdma: dma-controller@0 { - compatible = "ti,omap4430-sdma"; + compatible = "ti,omap4430-sdma", "ti,omap-sdma"; reg = <0x0 0x1000>; interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, @@ -349,7 +348,6 @@ target-module@66000 { /* 0x4a066000, ap 23 0a.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "mmu_dsp"; reg = <0x66000 0x4>, <0x66010 0x4>, <0x66014 0x4>; @@ -364,12 +362,18 @@ /* Domains (V, P, C): mm, dsp_pwrdm, dsp_clkdm */ clocks = <&dsp_clkctrl OMAP5_MMU_DSP_CLKCTRL 0>; clock-names = "fck"; + resets = <&prm_dsp 1>; + reset-names = "rstctrl"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x66000 0x1000>; - /* mmu_dsp cannot be moved before reset driver */ - status = "disabled"; + mmu_dsp: mmu@0 { + compatible = "ti,omap4-iommu"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <0>; + }; }; target-module@70000 { /* 0x4a070000, ap 79 2e.0 */ @@ -430,7 +434,6 @@ target-module@0 { /* 0x4a080000, ap 83 28.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "ocp2scp1"; reg = <0x0 0x4>, <0x10 0x4>, <0x14 0x4>; @@ -488,7 +491,6 @@ target-module@10000 { /* 0x4a090000, ap 89 36.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "ocp2scp3"; reg = <0x10000 0x4>, <0x10010 0x4>, <0x10014 0x4>; @@ -593,7 +595,6 @@ target-module@74000 { /* 0x4a0f4000, ap 25 04.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mailbox"; reg = <0x74000 0x4>, <0x74010 0x4>; reg-names = "rev", "sysc"; @@ -628,7 +629,6 @@ target-module@76000 { /* 0x4a0f6000, ap 27 0c.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "spinlock"; reg = <0x76000 0x4>, <0x76010 0x4>, <0x76014 0x4>; @@ -1033,7 +1033,6 @@ target-module@20000 { /* 0x48020000, ap 3 04.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "uart3"; reg = <0x20050 0x4>, <0x20054 0x4>, <0x20058 0x4>; @@ -1063,7 +1062,6 @@ target-module@32000 { /* 0x48032000, ap 5 3e.0 */ compatible = "ti,sysc-omap4-timer", "ti,sysc"; - ti,hwmods = "timer2"; reg = <0x32000 0x4>, <0x32010 0x4>; reg-names = "rev", "sysc"; @@ -1091,7 +1089,6 @@ target-module@34000 { /* 0x48034000, ap 7 46.0 */ compatible = "ti,sysc-omap4-timer", "ti,sysc"; - ti,hwmods = "timer3"; reg = <0x34000 0x4>, <0x34010 0x4>; reg-names = "rev", "sysc"; @@ -1119,7 +1116,6 @@ target-module@36000 { /* 0x48036000, ap 9 4e.0 */ compatible = "ti,sysc-omap4-timer", "ti,sysc"; - ti,hwmods = "timer4"; reg = <0x36000 0x4>, <0x36010 0x4>; reg-names = "rev", "sysc"; @@ -1147,7 +1143,6 @@ target-module@3e000 { /* 0x4803e000, ap 11 56.0 */ compatible = "ti,sysc-omap4-timer", "ti,sysc"; - ti,hwmods = "timer9"; reg = <0x3e000 0x4>, <0x3e010 0x4>; reg-names = "rev", "sysc"; @@ -1176,7 +1171,6 @@ target-module@51000 { /* 0x48051000, ap 45 2e.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "gpio7"; reg = <0x51000 0x4>, <0x51010 0x4>, <0x51114 0x4>; @@ -1210,7 +1204,6 @@ target-module@53000 { /* 0x48053000, ap 35 36.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "gpio8"; reg = <0x53000 0x4>, <0x53010 0x4>, <0x53114 0x4>; @@ -1244,7 +1237,6 @@ target-module@55000 { /* 0x48055000, ap 13 0e.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "gpio2"; reg = <0x55000 0x4>, <0x55010 0x4>, <0x55114 0x4>; @@ -1278,7 +1270,6 @@ target-module@57000 { /* 0x48057000, ap 15 06.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "gpio3"; reg = <0x57000 0x4>, <0x57010 0x4>, <0x57114 0x4>; @@ -1312,7 +1303,6 @@ target-module@59000 { /* 0x48059000, ap 17 16.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "gpio4"; reg = <0x59000 0x4>, <0x59010 0x4>, <0x59114 0x4>; @@ -1346,7 +1336,6 @@ target-module@5b000 { /* 0x4805b000, ap 19 1e.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "gpio5"; reg = <0x5b000 0x4>, <0x5b010 0x4>, <0x5b114 0x4>; @@ -1380,7 +1369,6 @@ target-module@5d000 { /* 0x4805d000, ap 21 26.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "gpio6"; reg = <0x5d000 0x4>, <0x5d010 0x4>, <0x5d114 0x4>; @@ -1414,7 +1402,6 @@ target-module@60000 { /* 0x48060000, ap 23 24.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "i2c3"; reg = <0x60000 0x8>, <0x60010 0x8>, <0x60090 0x8>; @@ -1446,7 +1433,6 @@ target-module@66000 { /* 0x48066000, ap 63 4c.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "uart5"; reg = <0x66050 0x4>, <0x66054 0x4>, <0x66058 0x4>; @@ -1476,7 +1462,6 @@ target-module@68000 { /* 0x48068000, ap 53 54.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "uart6"; reg = <0x68050 0x4>, <0x68054 0x4>, <0x68058 0x4>; @@ -1506,7 +1491,6 @@ target-module@6a000 { /* 0x4806a000, ap 24 0a.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "uart1"; reg = <0x6a050 0x4>, <0x6a054 0x4>, <0x6a058 0x4>; @@ -1536,7 +1520,6 @@ target-module@6c000 { /* 0x4806c000, ap 26 22.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "uart2"; reg = <0x6c050 0x4>, <0x6c054 0x4>, <0x6c058 0x4>; @@ -1566,7 +1549,6 @@ target-module@6e000 { /* 0x4806e000, ap 28 44.1 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "uart4"; reg = <0x6e050 0x4>, <0x6e054 0x4>, <0x6e058 0x4>; @@ -1596,7 +1578,6 @@ target-module@70000 { /* 0x48070000, ap 30 14.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "i2c1"; reg = <0x70000 0x8>, <0x70010 0x8>, <0x70090 0x8>; @@ -1628,7 +1609,6 @@ target-module@72000 { /* 0x48072000, ap 32 1c.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "i2c2"; reg = <0x72000 0x8>, <0x72010 0x8>, <0x72090 0x8>; @@ -1668,7 +1648,6 @@ target-module@7a000 { /* 0x4807a000, ap 81 2c.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "i2c4"; reg = <0x7a000 0x8>, <0x7a010 0x8>, <0x7a090 0x8>; @@ -1700,7 +1679,6 @@ target-module@7c000 { /* 0x4807c000, ap 83 34.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "i2c5"; reg = <0x7c000 0x8>, <0x7c010 0x8>, <0x7c090 0x8>; @@ -1732,7 +1710,6 @@ target-module@86000 { /* 0x48086000, ap 41 5e.0 */ compatible = "ti,sysc-omap4-timer", "ti,sysc"; - ti,hwmods = "timer10"; reg = <0x86000 0x4>, <0x86010 0x4>; reg-names = "rev", "sysc"; @@ -1761,7 +1738,6 @@ target-module@88000 { /* 0x48088000, ap 43 66.0 */ compatible = "ti,sysc-omap4-timer", "ti,sysc"; - ti,hwmods = "timer11"; reg = <0x88000 0x4>, <0x88010 0x4>; reg-names = "rev", "sysc"; @@ -1788,17 +1764,30 @@ }; }; - target-module@90000 { /* 0x48090000, ap 55 1a.0 */ - compatible = "ti,sysc"; - status = "disabled"; + rng_target: target-module@90000 { /* 0x48090000, ap 55 1a.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x91fe0 0x4>, + <0x91fe4 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>; + /* Domains (P, C): l4per_pwrdm, l4sec_clkdm */ + clocks = <&l4sec_clkctrl OMAP5_RNG_CLKCTRL 0>; + clock-names = "fck"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x90000 0x2000>; + + rng: rng@0 { + compatible = "ti,omap4-rng"; + reg = <0x0 0x2000>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; + }; }; target-module@98000 { /* 0x48098000, ap 47 08.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mcspi1"; reg = <0x98000 0x4>, <0x98010 0x4>; reg-names = "rev", "sysc"; @@ -1837,7 +1826,6 @@ target-module@9a000 { /* 0x4809a000, ap 49 10.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mcspi2"; reg = <0x9a000 0x4>, <0x9a010 0x4>; reg-names = "rev", "sysc"; @@ -1871,7 +1859,6 @@ target-module@9c000 { /* 0x4809c000, ap 51 3a.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mmc1"; reg = <0x9c000 0x4>, <0x9c010 0x4>; reg-names = "rev", "sysc"; @@ -1931,7 +1918,6 @@ target-module@ad000 { /* 0x480ad000, ap 61 20.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mmc3"; reg = <0xad000 0x4>, <0xad010 0x4>; reg-names = "rev", "sysc"; @@ -1972,7 +1958,6 @@ target-module@b4000 { /* 0x480b4000, ap 65 42.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mmc2"; reg = <0xb4000 0x4>, <0xb4010 0x4>; reg-names = "rev", "sysc"; @@ -2005,7 +1990,6 @@ target-module@b8000 { /* 0x480b8000, ap 67 32.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mcspi3"; reg = <0xb8000 0x4>, <0xb8010 0x4>; reg-names = "rev", "sysc"; @@ -2036,7 +2020,6 @@ target-module@ba000 { /* 0x480ba000, ap 69 18.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mcspi4"; reg = <0xba000 0x4>, <0xba010 0x4>; reg-names = "rev", "sysc"; @@ -2067,7 +2050,6 @@ target-module@d1000 { /* 0x480d1000, ap 71 28.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mmc4"; reg = <0xd1000 0x4>, <0xd1010 0x4>; reg-names = "rev", "sysc"; @@ -2100,7 +2082,6 @@ target-module@d5000 { /* 0x480d5000, ap 73 30.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mmc5"; reg = <0xd5000 0x4>, <0xd5010 0x4>; reg-names = "rev", "sysc"; @@ -2296,7 +2277,6 @@ target-module@0 { /* 0x4ae10000, ap 5 10.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "gpio1"; reg = <0x0 0x4>, <0x10 0x4>, <0x114 0x4>; @@ -2331,7 +2311,6 @@ target-module@4000 { /* 0x4ae14000, ap 7 14.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "wd_timer2"; reg = <0x4000 0x4>, <0x4010 0x4>, <0x4014 0x4>; @@ -2388,7 +2367,6 @@ target-module@c000 { /* 0x4ae1c000, ap 11 1c.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "kbd"; reg = <0xc000 0x4>, <0xc010 0x4>; reg-names = "rev", "sysc"; diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index edfd26c03462..d0ecf54d5a23 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -162,7 +162,7 @@ l4_abe: interconnect@40100000 { }; - ocmcram: ocmcram@40300000 { + ocmcram: sram@40300000 { compatible = "mmio-sram"; reg = <0x40300000 0x20000>; /* 128k */ }; @@ -186,21 +186,33 @@ #gpio-cells = <2>; }; - mmu_dsp: mmu@4a066000 { - compatible = "ti,omap4-iommu"; - reg = <0x4a066000 0x100>; - interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "mmu_dsp"; - #iommu-cells = <0>; - }; + target-module@55082000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x55082000 0x4>, + <0x55082010 0x4>, + <0x55082014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + clocks = <&ipu_clkctrl OMAP5_MMU_IPU_CLKCTRL 0>; + clock-names = "fck"; + resets = <&prm_core 2>; + reset-names = "rstctrl"; + ranges = <0x0 0x55082000 0x100>; + #size-cells = <1>; + #address-cells = <1>; - mmu_ipu: mmu@55082000 { - compatible = "ti,omap4-iommu"; - reg = <0x55082000 0x100>; - interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "mmu_ipu"; - #iommu-cells = <0>; - ti,iommu-bus-err-back; + mmu_ipu: mmu@0 { + compatible = "ti,omap4-iommu"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <0>; + ti,iommu-bus-err-back; + }; }; dmm@4e000000 { @@ -257,6 +269,29 @@ ports-implemented = <0x1>; }; + target-module@56000000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x5600fe00 0x4>, + <0x5600fe10 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + clocks = <&gpu_clkctrl OMAP5_GPU_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x56000000 0x2000000>; + + /* + * Closed source PowerVR driver, no child device + * binding or driver in mainline + */ + }; + dss: dss@58000000 { compatible = "ti,omap5-dss"; reg = <0x58000000 0x80>; @@ -412,3 +447,29 @@ #include "omap5-l4-abe.dtsi" #include "omap54xx-clocks.dtsi" + +&prm { + prm_dsp: prm@400 { + compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst"; + reg = <0x400 0x100>; + #reset-cells = <1>; + }; + + prm_core: prm@700 { + compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst"; + reg = <0x700 0x100>; + #reset-cells = <1>; + }; + + prm_iva: prm@1200 { + compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst"; + reg = <0x1200 0x100>; + #reset-cells = <1>; + }; + + prm_device: prm@1c00 { + compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst"; + reg = <0x1c00 0x100>; + #reset-cells = <1>; + }; +}; diff --git a/arch/arm/boot/dts/omap54xx-clocks.dtsi b/arch/arm/boot/dts/omap54xx-clocks.dtsi index 33e8dd905bff..42f2c447727d 100644 --- a/arch/arm/boot/dts/omap54xx-clocks.dtsi +++ b/arch/arm/boot/dts/omap54xx-clocks.dtsi @@ -1125,11 +1125,17 @@ #size-cells = <1>; ranges = <0 0x1000 0x200>; - l4per_clkctrl: clk@20 { - compatible = "ti,clkctrl"; + l4per_clkctrl: clock@20 { + compatible = "ti,clkctrl-l4per", "ti,clkctrl"; reg = <0x20 0x15c>; #clock-cells = <2>; }; + + l4sec_clkctrl: clock@1a0 { + compatible = "ti,clkctrl-l4sec", "ti,clkctrl"; + reg = <0x1a0 0x3c>; + #clock-cells = <2>; + }; }; dss_cm: dss_cm@1400 { @@ -1146,6 +1152,20 @@ }; }; + gpu_cm: gpu_cm@1500 { + compatible = "ti,omap4-cm"; + reg = <0x1500 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x1500 0x100>; + + gpu_clkctrl: clk@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0x4>; + #clock-cells = <2>; + }; + }; + l3init_cm: l3init_cm@1600 { compatible = "ti,omap4-cm"; reg = <0x1600 0x100>; diff --git a/arch/arm/boot/dts/openbmc-flash-layout-128.dtsi b/arch/arm/boot/dts/openbmc-flash-layout-128.dtsi new file mode 100644 index 000000000000..05101a38c5bd --- /dev/null +++ b/arch/arm/boot/dts/openbmc-flash-layout-128.dtsi @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: GPL-2.0+ + +partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + u-boot@0 { + reg = <0x0 0xe0000>; // 896KB + label = "u-boot"; + }; + + u-boot-env@e0000 { + reg = <0xe0000 0x20000>; // 128KB + label = "u-boot-env"; + }; + + kernel@100000 { + reg = <0x100000 0x900000>; // 9MB + label = "kernel"; + }; + + rofs@a00000 { + reg = <0xa00000 0x5600000>; // 86MB + label = "rofs"; + }; + + rwfs@6000000 { + reg = <0x6000000 0x2000000>; // 32MB + label = "rwfs"; + }; +}; diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi index 0a0fb147ebb9..fa1852eed37b 100644 --- a/arch/arm/boot/dts/qcom-apq8084.dtsi +++ b/arch/arm/boot/dts/qcom-apq8084.dtsi @@ -1,6 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 /dts-v1/; +#include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-apq8084.h> #include <dt-bindings/gpio/gpio.h> @@ -184,7 +185,7 @@ cpu-pmu { compatible = "qcom,krait-pmu"; - interrupts = <1 7 0xf04>; + interrupts = <GIC_PPI 7 0xf04>; }; clocks { @@ -203,10 +204,10 @@ timer { compatible = "arm,armv7-timer"; - interrupts = <1 2 0xf08>, - <1 3 0xf08>, - <1 4 0xf08>, - <1 1 0xf08>; + interrupts = <GIC_PPI 2 0xf08>, + <GIC_PPI 3 0xf08>, + <GIC_PPI 4 0xf08>, + <GIC_PPI 1 0xf08>; clock-frequency = <19200000>; }; @@ -253,12 +254,13 @@ tsens: thermal-sensor@fc4a8000 { compatible = "qcom,msm8974-tsens"; - reg = <0xfc4a8000 0x2000>; + reg = <0xfc4a9000 0x1000>, /* TM */ + <0xfc4a8000 0x1000>; /* SROT */ nvmem-cells = <&tsens_calib>, <&tsens_backup>; nvmem-cell-names = "calib", "calib_backup"; + #qcom,sensors = <11>; #thermal-sensor-cells = <1>; }; - timer@f9020000 { #address-cells = <1>; #size-cells = <1>; @@ -269,50 +271,50 @@ frame@f9021000 { frame-number = <0>; - interrupts = <0 8 0x4>, - <0 7 0x4>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; reg = <0xf9021000 0x1000>, <0xf9022000 0x1000>; }; frame@f9023000 { frame-number = <1>; - interrupts = <0 9 0x4>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; reg = <0xf9023000 0x1000>; status = "disabled"; }; frame@f9024000 { frame-number = <2>; - interrupts = <0 10 0x4>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; reg = <0xf9024000 0x1000>; status = "disabled"; }; frame@f9025000 { frame-number = <3>; - interrupts = <0 11 0x4>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; reg = <0xf9025000 0x1000>; status = "disabled"; }; frame@f9026000 { frame-number = <4>; - interrupts = <0 12 0x4>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; reg = <0xf9026000 0x1000>; status = "disabled"; }; frame@f9027000 { frame-number = <5>; - interrupts = <0 13 0x4>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; reg = <0xf9027000 0x1000>; status = "disabled"; }; frame@f9028000 { frame-number = <6>; - interrupts = <0 14 0x4>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; reg = <0xf9028000 0x1000>; status = "disabled"; }; @@ -404,13 +406,13 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; - interrupts = <0 208 0>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; }; blsp2_uart2: serial@f995e000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0xf995e000 0x1000>; - interrupts = <0 114 0x0>; + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; clock-names = "core", "iface"; status = "disabled"; @@ -420,7 +422,7 @@ compatible = "qcom,apq8084-sdhci", "qcom,sdhci-msm-v4"; reg = <0xf9824900 0x11c>, <0xf9824000 0x800>; reg-names = "hc_mem", "core_mem"; - interrupts = <0 123 0>, <0 138 0>; + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "hc_irq", "pwr_irq"; clocks = <&gcc GCC_SDCC1_APPS_CLK>, <&gcc GCC_SDCC1_AHB_CLK>, @@ -433,7 +435,7 @@ compatible = "qcom,apq8084-sdhci", "qcom,sdhci-msm-v4"; reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>; reg-names = "hc_mem", "core_mem"; - interrupts = <0 125 0>, <0 221 0>; + interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "hc_irq", "pwr_irq"; clocks = <&gcc GCC_SDCC2_APPS_CLK>, <&gcc GCC_SDCC2_AHB_CLK>, @@ -449,7 +451,7 @@ <0xfc4cb000 0x1000>, <0xfc4ca000 0x1000>; interrupt-names = "periph_irq"; - interrupts = <0 190 0>; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; qcom,ee = <0>; qcom,channel = <0>; #address-cells = <2>; @@ -463,7 +465,7 @@ compatible = "qcom,smd"; rpm { - interrupts = <0 168 1>; + interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; qcom,ipc = <&apcs 8 0>; qcom,smd-edge = <15>; diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi index 56f51599852d..71bb25a8afc0 100644 --- a/arch/arm/boot/dts/qcom-ipq4019.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi @@ -102,6 +102,7 @@ L2: l2-cache { compatible = "cache"; cache-level = <2>; + qcom,saw = <&saw_l2>; }; }; @@ -206,6 +207,18 @@ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; }; + sdhci: sdhci@7824900 { + compatible = "qcom,sdhci-msm-v4"; + reg = <0x7824900 0x11c>, <0x7824000 0x800>; + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + bus-width = <8>; + clocks = <&gcc GCC_SDCC1_APPS_CLK>, <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_DCD_XO_CLK>; + clock-names = "core", "iface", "xo"; + status = "disabled"; + }; + blsp_dma: dma@7884000 { compatible = "qcom,bam-v1.7.0"; reg = <0x07884000 0x23000>; @@ -341,6 +354,12 @@ regulator; }; + saw_l2: regulator@b012000 { + compatible = "qcom,saw2"; + reg = <0xb012000 0x1000>; + regulator; + }; + blsp1_uart1: serial@78af000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0x78af000 0x200>; diff --git a/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts b/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts index 26160c324802..942e3a2cac35 100644 --- a/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts +++ b/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts @@ -143,7 +143,7 @@ compatible = "smsc,usb3503a"; reg = <0x8>; connect-gpios = <&gpioext2 1 GPIO_ACTIVE_HIGH>; - intn-gpios = <&gpioext2 0 GPIO_ACTIVE_LOW>; + intn-gpios = <&gpioext2 0 GPIO_ACTIVE_HIGH>; initial-mode = <1>; }; }; diff --git a/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts b/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts index bf402ae39226..d2d48770ec0f 100644 --- a/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts +++ b/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts @@ -221,6 +221,8 @@ regulator-max-microvolt = <2950000>; regulator-boot-on; + regulator-system-load = <200000>; + regulator-allow-set-load; }; l21 { @@ -257,6 +259,25 @@ status = "ok"; }; + remoteproc@fb21b000 { + status = "ok"; + + vddmx-supply = <&pm8841_s1>; + vddcx-supply = <&pm8841_s2>; + + pinctrl-names = "default"; + pinctrl-0 = <&wcnss_pin_a>; + + smd-edge { + qcom,remote-pid = <4>; + label = "pronto"; + + wcnss { + status = "ok"; + }; + }; + }; + pinctrl@fd510000 { sdhc1_pin_a: sdhc1-pin-active { clk { @@ -272,14 +293,6 @@ }; }; - sdhc2_cd_pin_a: sdhc2-cd-pin-active { - pins = "gpio62"; - function = "gpio"; - - drive-strength = <2>; - bias-disable; - }; - sdhc2_pin_a: sdhc2-pin-active { clk { pins = "sdc2_clk"; @@ -293,6 +306,32 @@ bias-pull-up; }; }; + + wcnss_pin_a: wcnss-pin-active { + wlan { + pins = "gpio36", "gpio37", "gpio38", "gpio39", "gpio40"; + function = "wlan"; + + drive-strength = <6>; + bias-pull-down; + }; + + bt { + pins = "gpio35", "gpio43", "gpio44"; + function = "bt"; + + drive-strength = <2>; + bias-pull-down; + }; + + fm { + pins = "gpio41", "gpio42"; + function = "fm"; + + drive-strength = <2>; + bias-pull-down; + }; + }; }; sdhci@f9824900 { @@ -317,7 +356,7 @@ bus-width = <4>; pinctrl-names = "default"; - pinctrl-0 = <&sdhc2_pin_a>, <&sdhc2_cd_pin_a>; + pinctrl-0 = <&sdhc2_pin_a>; }; usb@f9a55000 { @@ -344,6 +383,16 @@ }; }; }; + + imem@fe805000 { + status = "okay"; + + reboot-mode { + mode-normal = <0x77665501>; + mode-bootloader = <0x77665500>; + mode-recovery = <0x77665502>; + }; + }; }; &spmi_bus { diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index 369e58f64145..4b161b809dd5 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -1,6 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 /dts-v1/; +#include <dt-bindings/interconnect/qcom,msm8974.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-msm8974.h> #include <dt-bindings/clock/qcom,mmcc-msm8974.h> @@ -20,17 +21,17 @@ #size-cells = <1>; ranges; - mpss@8000000 { + mpss_region: mpss@8000000 { reg = <0x08000000 0x5100000>; no-map; }; - mba@d100000 { + mba_region: mba@d100000 { reg = <0x0d100000 0x100000>; no-map; }; - reserved@d200000 { + wcnss_region: wcnss@d200000 { reg = <0x0d200000 0xa00000>; no-map; }; @@ -61,8 +62,11 @@ }; rmtfs@fd80000 { + compatible = "qcom,rmtfs-mem"; reg = <0x0fd80000 0x180000>; no-map; + + qcom,client-id = <1>; }; }; @@ -217,6 +221,96 @@ }; }; }; + + q6-dsp-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 1>; + + trips { + q6_dsp_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + modemtx-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 2>; + + trips { + modemtx_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + video-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 3>; + + trips { + video_alert0: trip-point0 { + temperature = <95000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + wlan-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 4>; + + trips { + wlan_alert0: trip-point0 { + temperature = <105000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + gpu-thermal-top { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 9>; + + trips { + gpu1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + gpu-thermal-bottom { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 10>; + + trips { + gpu2_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; }; cpu-pmu { @@ -266,6 +360,15 @@ qcom,smem-states = <&adsp_smp2p_out 0>; qcom,smem-state-names = "stop"; + + smd-edge { + interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>; + + qcom,ipc = <&apcs 8 8>; + qcom,smd-edge = <1>; + + label = "lpass"; + }; }; smem { @@ -441,6 +544,8 @@ nvmem-cells = <&tsens_calib>, <&tsens_backup>; nvmem-cell-names = "calib", "calib_backup"; #qcom,sensors = <11>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow"; #thermal-sensor-cells = <1>; }; @@ -703,6 +808,119 @@ clock-names = "core"; }; + remoteproc@fc880000 { + compatible = "qcom,msm8974-mss-pil"; + reg = <0xfc880000 0x100>, <0xfc820000 0x020>; + reg-names = "qdsp6", "rmb"; + + interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; + + clocks = <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>, + <&gcc GCC_MSS_CFG_AHB_CLK>, + <&gcc GCC_BOOT_ROM_AHB_CLK>, + <&xo_board>; + clock-names = "iface", "bus", "mem", "xo"; + + resets = <&gcc GCC_MSS_RESTART>; + reset-names = "mss_restart"; + + cx-supply = <&pm8841_s2>; + mss-supply = <&pm8841_s3>; + mx-supply = <&pm8841_s1>; + pll-supply = <&pm8941_l12>; + + qcom,halt-regs = <&tcsr_mutex_block 0x1180 0x1200 0x1280>; + + qcom,smem-states = <&modem_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + mba { + memory-region = <&mba_region>; + }; + + mpss { + memory-region = <&mpss_region>; + }; + + smd-edge { + interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>; + + qcom,ipc = <&apcs 8 12>; + qcom,smd-edge = <0>; + + label = "modem"; + }; + }; + + pronto: remoteproc@fb21b000 { + compatible = "qcom,pronto-v2-pil", "qcom,pronto"; + reg = <0xfb204000 0x2000>, <0xfb202000 0x1000>, <0xfb21b000 0x3000>; + reg-names = "ccu", "dxe", "pmu"; + + memory-region = <&wcnss_region>; + + interrupts-extended = <&intc GIC_SPI 149 IRQ_TYPE_EDGE_RISING>, + <&wcnss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&wcnss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&wcnss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; + + vddpx-supply = <&pm8941_s3>; + + qcom,smem-states = <&wcnss_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + iris { + compatible = "qcom,wcn3680"; + + clocks = <&rpmcc RPM_SMD_CXO_A2>; + clock-names = "xo"; + + vddxo-supply = <&pm8941_l6>; + vddrfa-supply = <&pm8941_l11>; + vddpa-supply = <&pm8941_l19>; + vdddig-supply = <&pm8941_s3>; + }; + + smd-edge { + interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>; + + qcom,ipc = <&apcs 8 17>; + qcom,smd-edge = <6>; + + wcnss { + compatible = "qcom,wcnss"; + qcom,smd-channels = "WCNSS_CTRL"; + status = "disabled"; + + qcom,mmio = <&pronto>; + + bt { + compatible = "qcom,wcnss-bt"; + }; + + wifi { + compatible = "qcom,wcnss-wlan"; + + interrupts = <GIC_SPI 145 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 146 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "tx", "rx"; + + qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>; + qcom,smem-state-names = "tx-enable", "tx-rings-empty"; + }; + }; + }; + }; + msmgpio: pinctrl@fd510000 { compatible = "qcom,msm8974-pinctrl"; reg = <0xfd510000 0x4000>; @@ -1087,6 +1305,79 @@ }; }; + ocmem@fdd00000 { + compatible = "qcom,msm8974-ocmem"; + reg = <0xfdd00000 0x2000>, + <0xfec00000 0x180000>; + reg-names = "ctrl", + "mem"; + clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>, + <&mmcc OCMEMCX_OCMEMNOC_CLK>; + clock-names = "core", + "iface"; + + #address-cells = <1>; + #size-cells = <1>; + + gmu_sram: gmu-sram@0 { + reg = <0x0 0x100000>; + }; + }; + + bimc: interconnect@fc380000 { + reg = <0xfc380000 0x6a000>; + compatible = "qcom,msm8974-bimc"; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_BIMC_CLK>, + <&rpmcc RPM_SMD_BIMC_A_CLK>; + }; + + snoc: interconnect@fc460000 { + reg = <0xfc460000 0x4000>; + compatible = "qcom,msm8974-snoc"; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_SNOC_CLK>, + <&rpmcc RPM_SMD_SNOC_A_CLK>; + }; + + pnoc: interconnect@fc468000 { + reg = <0xfc468000 0x4000>; + compatible = "qcom,msm8974-pnoc"; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_PNOC_CLK>, + <&rpmcc RPM_SMD_PNOC_A_CLK>; + }; + + ocmemnoc: interconnect@fc470000 { + reg = <0xfc470000 0x4000>; + compatible = "qcom,msm8974-ocmemnoc"; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>, + <&rpmcc RPM_SMD_OCMEMGX_A_CLK>; + }; + + mmssnoc: interconnect@fc478000 { + reg = <0xfc478000 0x4000>; + compatible = "qcom,msm8974-mmssnoc"; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&mmcc MMSS_S0_AXI_CLK>, + <&mmcc MMSS_S0_AXI_CLK>; + }; + + cnoc: interconnect@fc480000 { + reg = <0xfc480000 0x4000>; + compatible = "qcom,msm8974-cnoc"; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_CNOC_CLK>, + <&rpmcc RPM_SMD_CNOC_A_CLK>; + }; + mdss: mdss@fd900000 { status = "disabled"; @@ -1133,6 +1424,9 @@ "core", "vsync"; + interconnects = <&mmssnoc MNOC_MAS_MDP_PORT0 &bimc BIMC_SLV_EBI_CH0>; + interconnect-names = "mdp0-mem"; + ports { #address-cells = <1>; #size-cells = <0>; @@ -1217,24 +1511,21 @@ clock-names = "iface"; }; }; - }; - smd { - compatible = "qcom,smd"; - - adsp { - interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>; + imem@fe805000 { + status = "disabled"; + compatible = "syscon", "simple-mfd"; + reg = <0xfe805000 0x1000>; - qcom,ipc = <&apcs 8 8>; - qcom,smd-edge = <1>; + reboot-mode { + compatible = "syscon-reboot-mode"; + offset = <0x65c>; + }; }; + }; - modem { - interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>; - - qcom,ipc = <&apcs 8 12>; - qcom,smd-edge = <0>; - }; + smd { + compatible = "qcom,smd"; rpm { interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; diff --git a/arch/arm/boot/dts/qcom-pm8941.dtsi b/arch/arm/boot/dts/qcom-pm8941.dtsi index f198480c8ef4..c1f2012d1c8b 100644 --- a/arch/arm/boot/dts/qcom-pm8941.dtsi +++ b/arch/arm/boot/dts/qcom-pm8941.dtsi @@ -178,6 +178,16 @@ qcom,vs-soft-start-strength = <0>; regulator-initial-mode = <1>; }; + + pm8941_5vs2: 5vs2 { + regulator-enable-ramp-delay = <1000>; + regulator-pull-down; + regulator-over-current-protection; + qcom,ocp-max-retries = <10>; + qcom,ocp-retry-delay = <30>; + qcom,vs-soft-start-strength = <0>; + regulator-initial-mode = <1>; + }; }; }; }; diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi index d03dcd919d6f..75b2796ebfca 100644 --- a/arch/arm/boot/dts/r7s72100.dtsi +++ b/arch/arm/boot/dts/r7s72100.dtsi @@ -313,9 +313,9 @@ mmcif: mmc@e804c800 { compatible = "renesas,mmcif-r7s72100", "renesas,sh-mmcif"; reg = <0xe804c800 0x80>; - interrupts = <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R7S72100_CLK_MMCIF>; power-domains = <&cpg_clocks>; reg-io-width = <4>; @@ -326,9 +326,9 @@ sdhi0: sd@e804e000 { compatible = "renesas,sdhi-r7s72100"; reg = <0xe804e000 0x100>; - interrupts = <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp12_clks R7S72100_CLK_SDHI00>, <&mstp12_clks R7S72100_CLK_SDHI01>; @@ -342,9 +342,9 @@ sdhi1: sd@e804e800 { compatible = "renesas,sdhi-r7s72100"; reg = <0xe804e800 0x100>; - interrupts = <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp12_clks R7S72100_CLK_SDHI10>, <&mstp12_clks R7S72100_CLK_SDHI11>; diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi index dd865f3c2eda..a5cd31229fbd 100644 --- a/arch/arm/boot/dts/r8a73a4.dtsi +++ b/arch/arm/boot/dts/r8a73a4.dtsi @@ -84,27 +84,27 @@ dma0: dma-controller@e6700020 { compatible = "renesas,shdma-r8a73a4"; reg = <0 0xe6700020 0 0x89e0>; - interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts index 758360a2edc3..d960c2767f61 100644 --- a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts +++ b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts @@ -60,8 +60,7 @@ enable-gpio = <&pfc 74 GPIO_ACTIVE_HIGH>; gpios = <&pfc 17 GPIO_ACTIVE_HIGH>; - states = <3300000 0 - 1800000 1>; + states = <3300000 0>, <1800000 1>; enable-active-high; }; diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi index 12ffe73bf2bc..ebc1ff64f530 100644 --- a/arch/arm/boot/dts/r8a7740.dtsi +++ b/arch/arm/boot/dts/r8a7740.dtsi @@ -102,14 +102,14 @@ <0xe6900020 1>, <0xe6900040 1>, <0xe6900060 1>; - interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7740_CLK_INTCA>; power-domains = <&pd_a4s>; }; @@ -124,14 +124,14 @@ <0xe6900024 1>, <0xe6900044 1>, <0xe6900064 1>; - interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7740_CLK_INTCA>; power-domains = <&pd_a4s>; }; @@ -146,14 +146,14 @@ <0xe6900028 1>, <0xe6900048 1>, <0xe6900068 1>; - interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7740_CLK_INTCA>; power-domains = <&pd_a4s>; }; @@ -168,14 +168,14 @@ <0xe690002c 1>, <0xe690004c 1>, <0xe690006c 1>; - interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7740_CLK_INTCA>; power-domains = <&pd_a4s>; }; @@ -198,10 +198,10 @@ #size-cells = <0>; compatible = "renesas,iic-r8a7740", "renesas,rmobile-iic"; reg = <0xfff20000 0x425>; - interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7740_CLK_IIC0>; power-domains = <&pd_a4r>; status = "disabled"; @@ -212,10 +212,10 @@ #size-cells = <0>; compatible = "renesas,iic-r8a7740", "renesas,rmobile-iic"; reg = <0xe6c20000 0x425>; - interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7740_CLK_IIC1>; power-domains = <&pd_a3sp>; status = "disabled"; @@ -342,8 +342,8 @@ mmcif0: mmc@e6bd0000 { compatible = "renesas,mmcif-r8a7740", "renesas,sh-mmcif"; reg = <0xe6bd0000 0x100>; - interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7740_CLK_MMC>; power-domains = <&pd_a3sp>; status = "disabled"; @@ -352,9 +352,9 @@ sdhi0: sd@e6850000 { compatible = "renesas,sdhi-r8a7740"; reg = <0xe6850000 0x100>; - interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7740_CLK_SDHI0>; power-domains = <&pd_a3sp>; cap-sd-highspeed; @@ -365,9 +365,9 @@ sdhi1: sd@e6860000 { compatible = "renesas,sdhi-r8a7740"; reg = <0xe6860000 0x100>; - interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7740_CLK_SDHI1>; power-domains = <&pd_a3sp>; cap-sd-highspeed; @@ -378,9 +378,9 @@ sdhi2: sd@e6870000 { compatible = "renesas,sdhi-r8a7740"; reg = <0xe6870000 0x100>; - interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp4_clks R8A7740_CLK_SDHI2>; power-domains = <&pd_a3sp>; cap-sd-highspeed; diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi index de981d629bdd..1cd19a569bd0 100644 --- a/arch/arm/boot/dts/r8a7743.dtsi +++ b/arch/arm/boot/dts/r8a7743.dtsi @@ -399,6 +399,9 @@ icram0: sram@e63a0000 { compatible = "mmio-sram"; reg = <0 0xe63a0000 0 0x12000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0xe63a0000 0x12000>; }; icram1: sram@e63c0000 { @@ -417,6 +420,9 @@ icram2: sram@e6300000 { compatible = "mmio-sram"; reg = <0 0xe6300000 0 0x40000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0xe6300000 0x40000>; }; /* The memory map in the User's Manual maps the cores to @@ -600,8 +606,8 @@ compatible = "renesas,r8a7743-usb-dmac", "renesas,usb-dmac"; reg = <0 0xe65a0000 0 0x100>; - interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "ch0", "ch1"; clocks = <&cpg CPG_MOD 330>; power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; @@ -614,8 +620,8 @@ compatible = "renesas,r8a7743-usb-dmac", "renesas,usb-dmac"; reg = <0 0xe65b0000 0 0x100>; - interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "ch0", "ch1"; clocks = <&cpg CPG_MOD 331>; power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; @@ -628,22 +634,22 @@ compatible = "renesas,dmac-r8a7743", "renesas,rcar-dmac"; reg = <0 0xe6700000 0 0x20000>; - interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -661,22 +667,22 @@ compatible = "renesas,dmac-r8a7743", "renesas,rcar-dmac"; reg = <0 0xe6720000 0 0x20000>; - interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -1366,20 +1372,20 @@ compatible = "renesas,dmac-r8a7743", "renesas,rcar-dmac"; reg = <0 0xec700000 0 0x10000>; - interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -1397,20 +1403,20 @@ compatible = "renesas,dmac-r8a7743", "renesas,rcar-dmac"; reg = <0 0xec720000 0 0x10000>; - interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -1461,10 +1467,10 @@ #size-cells = <2>; #interrupt-cells = <1>; ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>; - interrupt-map-mask = <0xff00 0 0 0x7>; - interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH - 0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH - 0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map-mask = <0xf800 0 0 0x7>; + interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; usb@1,0 { reg = <0x800 0 0 0 0>; @@ -1496,10 +1502,10 @@ #size-cells = <2>; #interrupt-cells = <1>; ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>; - interrupt-map-mask = <0xff00 0 0 0x7>; - interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH - 0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH - 0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map-mask = <0xf800 0 0 0x7>; + interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; usb@1,0 { reg = <0x10800 0 0 0 0>; @@ -1611,13 +1617,13 @@ #size-cells = <2>; bus-range = <0x00 0xff>; device_type = "pci"; - ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000 - 0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000 - 0x02000000 0 0x30000000 0 0x30000000 0 0x08000000 - 0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; + ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>, + <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>, + <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>, + <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; /* Map all possible DDR as inbound ranges */ - dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000 - 0x43000000 2 0x00000000 2 0x00000000 1 0x00000000>; + dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>, + <0x43000000 2 0x00000000 2 0x00000000 1 0x00000000>; interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/r8a7744.dtsi b/arch/arm/boot/dts/r8a7744.dtsi index fa74a262107b..1c82dd0abd76 100644 --- a/arch/arm/boot/dts/r8a7744.dtsi +++ b/arch/arm/boot/dts/r8a7744.dtsi @@ -399,6 +399,9 @@ icram0: sram@e63a0000 { compatible = "mmio-sram"; reg = <0 0xe63a0000 0 0x12000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0xe63a0000 0x12000>; }; icram1: sram@e63c0000 { @@ -417,6 +420,9 @@ icram2: sram@e6300000 { compatible = "mmio-sram"; reg = <0 0xe6300000 0 0x40000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0xe6300000 0x40000>; }; /* The memory map in the User's Manual maps the cores to @@ -600,8 +606,8 @@ compatible = "renesas,r8a7744-usb-dmac", "renesas,usb-dmac"; reg = <0 0xe65a0000 0 0x100>; - interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "ch0", "ch1"; clocks = <&cpg CPG_MOD 330>; power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; @@ -614,8 +620,8 @@ compatible = "renesas,r8a7744-usb-dmac", "renesas,usb-dmac"; reg = <0 0xe65b0000 0 0x100>; - interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "ch0", "ch1"; clocks = <&cpg CPG_MOD 331>; power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; @@ -628,22 +634,22 @@ compatible = "renesas,dmac-r8a7744", "renesas,rcar-dmac"; reg = <0 0xe6700000 0 0x20000>; - interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -661,22 +667,22 @@ compatible = "renesas,dmac-r8a7744", "renesas,rcar-dmac"; reg = <0 0xe6720000 0 0x20000>; - interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -1366,20 +1372,20 @@ compatible = "renesas,dmac-r8a7744", "renesas,rcar-dmac"; reg = <0 0xec700000 0 0x10000>; - interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -1397,20 +1403,20 @@ compatible = "renesas,dmac-r8a7744", "renesas,rcar-dmac"; reg = <0 0xec720000 0 0x10000>; - interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -1461,10 +1467,10 @@ #size-cells = <2>; #interrupt-cells = <1>; ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>; - interrupt-map-mask = <0xff00 0 0 0x7>; - interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH - 0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH - 0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map-mask = <0xf800 0 0 0x7>; + interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; usb@1,0 { reg = <0x800 0 0 0 0>; @@ -1496,10 +1502,10 @@ #size-cells = <2>; #interrupt-cells = <1>; ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>; - interrupt-map-mask = <0xff00 0 0 0x7>; - interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH - 0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH - 0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map-mask = <0xf800 0 0 0x7>; + interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; usb@1,0 { reg = <0x10800 0 0 0 0>; @@ -1597,13 +1603,13 @@ #size-cells = <2>; bus-range = <0x00 0xff>; device_type = "pci"; - ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000 - 0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000 - 0x02000000 0 0x30000000 0 0x30000000 0 0x08000000 - 0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; + ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>, + <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>, + <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>, + <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; /* Map all possible DDR as inbound ranges */ - dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000 - 0x43000000 2 0x00000000 2 0x00000000 1 0x00000000>; + dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>, + <0x43000000 2 0x00000000 2 0x00000000 1 0x00000000>; interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts index ce6603b0994b..58d369ad8279 100644 --- a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts +++ b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts @@ -76,8 +76,7 @@ gpios = <&gpio0 20 GPIO_ACTIVE_LOW>; gpios-states = <1>; - states = <3300000 1 - 1800000 0>; + states = <3300000 1>, <1800000 0>; }; }; diff --git a/arch/arm/boot/dts/r8a7745.dtsi b/arch/arm/boot/dts/r8a7745.dtsi index c53f7ff20695..3f88a7e34af2 100644 --- a/arch/arm/boot/dts/r8a7745.dtsi +++ b/arch/arm/boot/dts/r8a7745.dtsi @@ -363,6 +363,9 @@ icram0: sram@e63a0000 { compatible = "mmio-sram"; reg = <0 0xe63a0000 0 0x12000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0xe63a0000 0x12000>; }; icram1: sram@e63c0000 { @@ -381,6 +384,9 @@ icram2: sram@e6300000 { compatible = "mmio-sram"; reg = <0 0xe6300000 0 0x40000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0xe6300000 0x40000>; }; i2c0: i2c@e6508000 { #address-cells = <1>; @@ -543,8 +549,8 @@ compatible = "renesas,r8a7745-usb-dmac", "renesas,usb-dmac"; reg = <0 0xe65a0000 0 0x100>; - interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "ch0", "ch1"; clocks = <&cpg CPG_MOD 330>; power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; @@ -557,8 +563,8 @@ compatible = "renesas,r8a7745-usb-dmac", "renesas,usb-dmac"; reg = <0 0xe65b0000 0 0x100>; - interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "ch0", "ch1"; clocks = <&cpg CPG_MOD 331>; power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; @@ -571,22 +577,22 @@ compatible = "renesas,dmac-r8a7745", "renesas,rcar-dmac"; reg = <0 0xe6700000 0 0x20000>; - interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -604,22 +610,22 @@ compatible = "renesas,dmac-r8a7745", "renesas,rcar-dmac"; reg = <0 0xe6720000 0 0x20000>; - interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -1293,20 +1299,20 @@ compatible = "renesas,dmac-r8a7745", "renesas,rcar-dmac"; reg = <0 0xec700000 0 0x10000>; - interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -1337,10 +1343,10 @@ #size-cells = <2>; #interrupt-cells = <1>; ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>; - interrupt-map-mask = <0xff00 0 0 0x7>; - interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH - 0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH - 0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map-mask = <0xf800 0 0 0x7>; + interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; usb@1,0 { reg = <0x800 0 0 0 0>; @@ -1372,10 +1378,10 @@ #size-cells = <2>; #interrupt-cells = <1>; ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>; - interrupt-map-mask = <0xff00 0 0 0x7>; - interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH - 0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH - 0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map-mask = <0xf800 0 0 0x7>; + interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; usb@1,0 { reg = <0x10800 0 0 0 0>; diff --git a/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts b/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts index 450efe923008..8ac61b50aec0 100644 --- a/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts +++ b/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts @@ -65,8 +65,7 @@ gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>; gpios-states = <1>; - states = <3300000 1 - 1800000 0>; + states = <3300000 1>, <1800000 0>; }; }; diff --git a/arch/arm/boot/dts/r8a77470.dtsi b/arch/arm/boot/dts/r8a77470.dtsi index 56cb10b42ed9..6efcef1670e1 100644 --- a/arch/arm/boot/dts/r8a77470.dtsi +++ b/arch/arm/boot/dts/r8a77470.dtsi @@ -63,6 +63,13 @@ clock-frequency = <0>; }; + pmu { + compatible = "arm,cortex-a7-pmu"; + interrupts-extended = <&gic GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>; + }; + /* External SCIF clock */ scif_clk: scif { compatible = "fixed-clock"; @@ -235,6 +242,9 @@ icram0: sram@e63a0000 { compatible = "mmio-sram"; reg = <0 0xe63a0000 0 0x12000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0xe63a0000 0x12000>; }; icram1: sram@e63c0000 { @@ -253,6 +263,9 @@ icram2: sram@e6300000 { compatible = "mmio-sram"; reg = <0 0xe6300000 0 0x20000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0xe6300000 0x20000>; }; i2c0: i2c@e6508000 { @@ -400,8 +413,8 @@ compatible = "renesas,r8a77470-usb-dmac", "renesas,usb-dmac"; reg = <0 0xe65a0000 0 0x100>; - interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "ch0", "ch1"; clocks = <&cpg CPG_MOD 330>; power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; @@ -414,8 +427,8 @@ compatible = "renesas,r8a77470-usb-dmac", "renesas,usb-dmac"; reg = <0 0xe65b0000 0 0x100>; - interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "ch0", "ch1"; clocks = <&cpg CPG_MOD 331>; power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; @@ -428,8 +441,8 @@ compatible = "renesas,r8a77470-usb-dmac", "renesas,usb-dmac"; reg = <0 0xe65a8000 0 0x100>; - interrupts = <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "ch0", "ch1"; clocks = <&cpg CPG_MOD 326>; power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; @@ -442,8 +455,8 @@ compatible = "renesas,r8a77470-usb-dmac", "renesas,usb-dmac"; reg = <0 0xe65b8000 0 0x100>; - interrupts = <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "ch0", "ch1"; clocks = <&cpg CPG_MOD 327>; power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; @@ -456,22 +469,22 @@ compatible = "renesas,dmac-r8a77470", "renesas,rcar-dmac"; reg = <0 0xe6700000 0 0x20000>; - interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -489,22 +502,22 @@ compatible = "renesas,dmac-r8a77470", "renesas,rcar-dmac"; reg = <0 0xe6720000 0 0x20000>; - interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi index 10d996d2941f..593c6df90303 100644 --- a/arch/arm/boot/dts/r8a7778.dtsi +++ b/arch/arm/boot/dts/r8a7778.dtsi @@ -79,10 +79,10 @@ <0xfe780024 4>, <0xfe780044 4>, <0xfe780064 4>; - interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; sense-bitfield-width = <2>; }; @@ -498,14 +498,17 @@ audio_clk_a: audio_clk_a { compatible = "fixed-clock"; #clock-cells = <0>; + clock-frequency = <0>; }; audio_clk_b: audio_clk_b { compatible = "fixed-clock"; #clock-cells = <0>; + clock-frequency = <0>; }; audio_clk_c: audio_clk_c { compatible = "fixed-clock"; #clock-cells = <0>; + clock-frequency = <0>; }; /* Fixed ratio clocks */ diff --git a/arch/arm/boot/dts/r8a7779-marzen.dts b/arch/arm/boot/dts/r8a7779-marzen.dts index c755f0b8fd0d..d2240b89ee52 100644 --- a/arch/arm/boot/dts/r8a7779-marzen.dts +++ b/arch/arm/boot/dts/r8a7779-marzen.dts @@ -48,8 +48,7 @@ gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>; gpios-states = <1>; - states = <3300000 1 - 1800000 0>; + states = <3300000 1>, <1800000 0>; }; ethernet@18000000 { diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi index 3ff259207527..beb9885e6ffc 100644 --- a/arch/arm/boot/dts/r8a7779.dtsi +++ b/arch/arm/boot/dts/r8a7779.dtsi @@ -68,6 +68,14 @@ <0xf0000100 0x100>; }; + timer@f0000200 { + compatible = "arm,cortex-a9-global-timer"; + reg = <0xf0000200 0x100>; + interrupts = <GIC_PPI 11 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>; + clocks = <&cpg_clocks R8A7779_CLK_ZS>; + }; + timer@f0000600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0xf0000600 0x20>; @@ -164,10 +172,10 @@ <0xfe780044 4>, <0xfe780064 4>, <0xfe780000 4>; - interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; sense-bitfield-width = <2>; }; @@ -296,7 +304,7 @@ <&cpg_clocks R8A7779_CLK_S>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; status = "disabled"; }; @@ -309,7 +317,7 @@ <&cpg_clocks R8A7779_CLK_S>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts index 83cc619861b2..097fd9317c6e 100644 --- a/arch/arm/boot/dts/r8a7790-lager.dts +++ b/arch/arm/boot/dts/r8a7790-lager.dts @@ -150,8 +150,7 @@ gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>; gpios-states = <1>; - states = <3300000 1 - 1800000 0>; + states = <3300000 1>, <1800000 0>; }; vcc_sdhi2: regulator-vcc-sdhi2 { @@ -174,8 +173,7 @@ gpios = <&gpio5 30 GPIO_ACTIVE_HIGH>; gpios-states = <1>; - states = <3300000 1 - 1800000 0>; + states = <3300000 1>, <1800000 0>; }; audio_clock: audio_clock { @@ -325,10 +323,10 @@ #size-cells = <0>; }; - /* - * IIC2 and I2C2 may be switched using pinmux. - * A fallback to GPIO is also provided. - */ + /* + * IIC2 and I2C2 may be switched using pinmux. + * A fallback to GPIO is also provided. + */ i2chdmi: i2c-12 { compatible = "i2c-demux-pinctrl"; i2c-parent = <&iic2>, <&i2c2>, <&gpioi2c2>; diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index 5a2747758f67..334ba19769b9 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -487,6 +487,9 @@ icram0: sram@e63a0000 { compatible = "mmio-sram"; reg = <0 0xe63a0000 0 0x12000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0xe63a0000 0x12000>; }; icram1: sram@e63c0000 { @@ -669,8 +672,8 @@ compatible = "renesas,r8a7790-usb-dmac", "renesas,usb-dmac"; reg = <0 0xe65a0000 0 0x100>; - interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "ch0", "ch1"; clocks = <&cpg CPG_MOD 330>; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; @@ -683,8 +686,8 @@ compatible = "renesas,r8a7790-usb-dmac", "renesas,usb-dmac"; reg = <0 0xe65b0000 0 0x100>; - interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "ch0", "ch1"; clocks = <&cpg CPG_MOD 331>; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; @@ -697,22 +700,22 @@ compatible = "renesas,dmac-r8a7790", "renesas,rcar-dmac"; reg = <0 0xe6700000 0 0x20000>; - interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -730,22 +733,22 @@ compatible = "renesas,dmac-r8a7790", "renesas,rcar-dmac"; reg = <0 0xe6720000 0 0x20000>; - interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -1300,20 +1303,20 @@ compatible = "renesas,dmac-r8a7790", "renesas,rcar-dmac"; reg = <0 0xec700000 0 0x10000>; - interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -1331,20 +1334,20 @@ compatible = "renesas,dmac-r8a7790", "renesas,rcar-dmac"; reg = <0 0xec720000 0 0x10000>; - interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -1388,10 +1391,10 @@ #size-cells = <2>; #interrupt-cells = <1>; ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>; - interrupt-map-mask = <0xff00 0 0 0x7>; - interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH - 0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH - 0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map-mask = <0xf800 0 0 0x7>; + interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; usb@1,0 { reg = <0x800 0 0 0 0>; @@ -1423,10 +1426,10 @@ #size-cells = <2>; #interrupt-cells = <1>; ranges = <0x02000000 0 0xee0a0000 0 0xee0a0000 0 0x00010000>; - interrupt-map-mask = <0xff00 0 0 0x7>; - interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH - 0x0800 0 0 1 &gic GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH - 0x1000 0 0 2 &gic GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map-mask = <0xf800 0 0 0x7>; + interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, + <0x0800 0 0 1 &gic GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, + <0x1000 0 0 2 &gic GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; }; pci2: pci@ee0d0000 { @@ -1446,10 +1449,10 @@ #size-cells = <2>; #interrupt-cells = <1>; ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>; - interrupt-map-mask = <0xff00 0 0 0x7>; - interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH - 0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH - 0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map-mask = <0xf800 0 0 0x7>; + interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; usb@1,0 { reg = <0x20800 0 0 0 0>; @@ -1614,13 +1617,13 @@ #size-cells = <2>; bus-range = <0x00 0xff>; device_type = "pci"; - ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000 - 0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000 - 0x02000000 0 0x30000000 0 0x30000000 0 0x08000000 - 0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; + ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>, + <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>, + <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>, + <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; /* Map all possible DDR as inbound ranges */ - dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000 - 0x43000000 1 0x80000000 1 0x80000000 0 0x80000000>; + dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>, + <0x43000000 1 0x80000000 1 0x80000000 0 0x80000000>; interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index af6bd8fcd5a4..2b096d5e06fb 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -193,8 +193,7 @@ gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>; gpios-states = <1>; - states = <3300000 1 - 1800000 0>; + states = <3300000 1>, <1800000 0>; }; vcc_sdhi1: regulator-vcc-sdhi1 { @@ -217,8 +216,7 @@ gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>; gpios-states = <1>; - states = <3300000 1 - 1800000 0>; + states = <3300000 1>, <1800000 0>; }; vcc_sdhi2: regulator-vcc-sdhi2 { @@ -241,8 +239,7 @@ gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>; gpios-states = <1>; - states = <3300000 1 - 1800000 0>; + states = <3300000 1>, <1800000 0>; }; audio_clock: audio_clock { diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts index d6cf16aac14d..f9ece7ab2010 100644 --- a/arch/arm/boot/dts/r8a7791-porter.dts +++ b/arch/arm/boot/dts/r8a7791-porter.dts @@ -63,8 +63,7 @@ gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>; gpios-states = <1>; - states = <3300000 1 - 1800000 0>; + states = <3300000 1>, <1800000 0>; }; vcc_sdhi2: regulator-vcc-sdhi2 { @@ -85,8 +84,7 @@ gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>; gpios-states = <1>; - states = <3300000 1 - 1800000 0>; + states = <3300000 1>, <1800000 0>; }; hdmi-out { diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index 6f875502453c..59a55e87fcc6 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -420,6 +420,9 @@ icram0: sram@e63a0000 { compatible = "mmio-sram"; reg = <0 0xe63a0000 0 0x12000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0xe63a0000 0x12000>; }; icram1: sram@e63c0000 { @@ -618,8 +621,8 @@ compatible = "renesas,r8a7791-usb-dmac", "renesas,usb-dmac"; reg = <0 0xe65a0000 0 0x100>; - interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "ch0", "ch1"; clocks = <&cpg CPG_MOD 330>; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; @@ -632,8 +635,8 @@ compatible = "renesas,r8a7791-usb-dmac", "renesas,usb-dmac"; reg = <0 0xe65b0000 0 0x100>; - interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "ch0", "ch1"; clocks = <&cpg CPG_MOD 331>; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; @@ -646,22 +649,22 @@ compatible = "renesas,dmac-r8a7791", "renesas,rcar-dmac"; reg = <0 0xe6700000 0 0x20000>; - interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -679,22 +682,22 @@ compatible = "renesas,dmac-r8a7791", "renesas,rcar-dmac"; reg = <0 0xe6720000 0 0x20000>; - interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -1338,20 +1341,20 @@ compatible = "renesas,dmac-r8a7791", "renesas,rcar-dmac"; reg = <0 0xec700000 0 0x10000>; - interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -1369,20 +1372,20 @@ compatible = "renesas,dmac-r8a7791", "renesas,rcar-dmac"; reg = <0 0xec720000 0 0x10000>; - interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -1426,10 +1429,10 @@ #size-cells = <2>; #interrupt-cells = <1>; ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>; - interrupt-map-mask = <0xff00 0 0 0x7>; - interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH - 0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH - 0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map-mask = <0xf800 0 0 0x7>; + interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; usb@1,0 { reg = <0x800 0 0 0 0>; @@ -1461,10 +1464,10 @@ #size-cells = <2>; #interrupt-cells = <1>; ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>; - interrupt-map-mask = <0xff00 0 0 0x7>; - interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH - 0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH - 0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map-mask = <0xf800 0 0 0x7>; + interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; usb@1,0 { reg = <0x10800 0 0 0 0>; @@ -1598,13 +1601,13 @@ #size-cells = <2>; bus-range = <0x00 0xff>; device_type = "pci"; - ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000 - 0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000 - 0x02000000 0 0x30000000 0 0x30000000 0 0x08000000 - 0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; + ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>, + <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>, + <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>, + <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; /* Map all possible DDR as inbound ranges */ - dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000 - 0x43000000 2 0x00000000 2 0x00000000 1 0x00000000>; + dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>, + <0x43000000 2 0x00000000 2 0x00000000 1 0x00000000>; interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/r8a7792.dtsi b/arch/arm/boot/dts/r8a7792.dtsi index c4ea2d676030..39af16caa2ae 100644 --- a/arch/arm/boot/dts/r8a7792.dtsi +++ b/arch/arm/boot/dts/r8a7792.dtsi @@ -345,6 +345,9 @@ icram0: sram@e63a0000 { compatible = "mmio-sram"; reg = <0 0xe63a0000 0 0x12000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0xe63a0000 0x12000>; }; icram1: sram@e63c0000 { @@ -466,22 +469,22 @@ compatible = "renesas,dmac-r8a7792", "renesas,rcar-dmac"; reg = <0 0xe6700000 0 0x20000>; - interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -499,22 +502,22 @@ compatible = "renesas,dmac-r8a7792", "renesas,rcar-dmac"; reg = <0 0xe6720000 0 0x20000>; - interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts index 42f3313e6988..22ca7cd1e7d2 100644 --- a/arch/arm/boot/dts/r8a7793-gose.dts +++ b/arch/arm/boot/dts/r8a7793-gose.dts @@ -65,81 +65,81 @@ compatible = "gpio-keys"; key-1 { - gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; - linux,code = <KEY_1>; - label = "SW2-1"; - wakeup-source; - debounce-interval = <20>; + gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; + linux,code = <KEY_1>; + label = "SW2-1"; + wakeup-source; + debounce-interval = <20>; }; key-2 { - gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; - linux,code = <KEY_2>; - label = "SW2-2"; - wakeup-source; - debounce-interval = <20>; + gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; + linux,code = <KEY_2>; + label = "SW2-2"; + wakeup-source; + debounce-interval = <20>; }; key-3 { - gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; - linux,code = <KEY_3>; - label = "SW2-3"; - wakeup-source; - debounce-interval = <20>; + gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; + linux,code = <KEY_3>; + label = "SW2-3"; + wakeup-source; + debounce-interval = <20>; }; key-4 { - gpios = <&gpio5 3 GPIO_ACTIVE_LOW>; - linux,code = <KEY_4>; - label = "SW2-4"; - wakeup-source; - debounce-interval = <20>; + gpios = <&gpio5 3 GPIO_ACTIVE_LOW>; + linux,code = <KEY_4>; + label = "SW2-4"; + wakeup-source; + debounce-interval = <20>; }; key-a { - gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; - linux,code = <KEY_A>; - label = "SW30"; - wakeup-source; - debounce-interval = <20>; + gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; + linux,code = <KEY_A>; + label = "SW30"; + wakeup-source; + debounce-interval = <20>; }; key-b { - gpios = <&gpio7 1 GPIO_ACTIVE_LOW>; - linux,code = <KEY_B>; - label = "SW31"; - wakeup-source; - debounce-interval = <20>; + gpios = <&gpio7 1 GPIO_ACTIVE_LOW>; + linux,code = <KEY_B>; + label = "SW31"; + wakeup-source; + debounce-interval = <20>; }; key-c { - gpios = <&gpio7 2 GPIO_ACTIVE_LOW>; - linux,code = <KEY_C>; - label = "SW32"; - wakeup-source; - debounce-interval = <20>; + gpios = <&gpio7 2 GPIO_ACTIVE_LOW>; + linux,code = <KEY_C>; + label = "SW32"; + wakeup-source; + debounce-interval = <20>; }; key-d { - gpios = <&gpio7 3 GPIO_ACTIVE_LOW>; - linux,code = <KEY_D>; - label = "SW33"; - wakeup-source; - debounce-interval = <20>; + gpios = <&gpio7 3 GPIO_ACTIVE_LOW>; + linux,code = <KEY_D>; + label = "SW33"; + wakeup-source; + debounce-interval = <20>; }; key-e { - gpios = <&gpio7 4 GPIO_ACTIVE_LOW>; - linux,code = <KEY_E>; - label = "SW34"; - wakeup-source; - debounce-interval = <20>; + gpios = <&gpio7 4 GPIO_ACTIVE_LOW>; + linux,code = <KEY_E>; + label = "SW34"; + wakeup-source; + debounce-interval = <20>; }; key-f { - gpios = <&gpio7 5 GPIO_ACTIVE_LOW>; - linux,code = <KEY_F>; - label = "SW35"; - wakeup-source; - debounce-interval = <20>; + gpios = <&gpio7 5 GPIO_ACTIVE_LOW>; + linux,code = <KEY_F>; + label = "SW35"; + wakeup-source; + debounce-interval = <20>; }; key-g { - gpios = <&gpio7 6 GPIO_ACTIVE_LOW>; - linux,code = <KEY_G>; - label = "SW36"; - wakeup-source; - debounce-interval = <20>; + gpios = <&gpio7 6 GPIO_ACTIVE_LOW>; + linux,code = <KEY_G>; + label = "SW36"; + wakeup-source; + debounce-interval = <20>; }; }; @@ -179,8 +179,7 @@ gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>; gpios-states = <1>; - states = <3300000 1 - 1800000 0>; + states = <3300000 1>, <1800000 0>; }; vcc_sdhi1: regulator-vcc-sdhi1 { @@ -203,8 +202,7 @@ gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>; gpios-states = <1>; - states = <3300000 1 - 1800000 0>; + states = <3300000 1>, <1800000 0>; }; vcc_sdhi2: regulator-vcc-sdhi2 { @@ -227,8 +225,7 @@ gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>; gpios-states = <1>; - states = <3300000 1 - 1800000 0>; + states = <3300000 1>, <1800000 0>; }; audio_clock: audio_clock { diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi index bf05110fac4e..eef035c4d983 100644 --- a/arch/arm/boot/dts/r8a7793.dtsi +++ b/arch/arm/boot/dts/r8a7793.dtsi @@ -406,6 +406,9 @@ icram0: sram@e63a0000 { compatible = "mmio-sram"; reg = <0 0xe63a0000 0 0x12000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0xe63a0000 0x12000>; }; icram1: sram@e63c0000 { @@ -565,22 +568,22 @@ compatible = "renesas,dmac-r8a7793", "renesas,rcar-dmac"; reg = <0 0xe6700000 0 0x20000>; - interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -598,22 +601,22 @@ compatible = "renesas,dmac-r8a7793", "renesas,rcar-dmac"; reg = <0 0xe6720000 0 0x20000>; - interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -1166,20 +1169,20 @@ compatible = "renesas,dmac-r8a7793", "renesas,rcar-dmac"; reg = <0 0xec700000 0 0x10000>; - interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -1197,20 +1200,20 @@ compatible = "renesas,dmac-r8a7793", "renesas,rcar-dmac"; reg = <0 0xec720000 0 0x10000>; - interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", diff --git a/arch/arm/boot/dts/r8a7794-alt.dts b/arch/arm/boot/dts/r8a7794-alt.dts index 1d22fcdc5d22..f79fce74cd9c 100644 --- a/arch/arm/boot/dts/r8a7794-alt.dts +++ b/arch/arm/boot/dts/r8a7794-alt.dts @@ -60,8 +60,7 @@ gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>; gpios-states = <1>; - states = <3300000 1 - 1800000 0>; + states = <3300000 1>, <1800000 0>; }; vcc_sdhi1: regulator-vcc-sdhi1 { @@ -84,8 +83,7 @@ gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>; gpios-states = <1>; - states = <3300000 1 - 1800000 0>; + states = <3300000 1>, <1800000 0>; }; lbsc { diff --git a/arch/arm/boot/dts/r8a7794-silk.dts b/arch/arm/boot/dts/r8a7794-silk.dts index b3177aea45d1..2c16ad854300 100644 --- a/arch/arm/boot/dts/r8a7794-silk.dts +++ b/arch/arm/boot/dts/r8a7794-silk.dts @@ -126,8 +126,7 @@ gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>; gpios-states = <1>; - states = <3300000 1 - 1800000 0>; + states = <3300000 1>, <1800000 0>; }; vga-encoder { diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi index 8d797d34816e..05ef79c6ed7f 100644 --- a/arch/arm/boot/dts/r8a7794.dtsi +++ b/arch/arm/boot/dts/r8a7794.dtsi @@ -351,6 +351,9 @@ icram0: sram@e63a0000 { compatible = "mmio-sram"; reg = <0 0xe63a0000 0 0x12000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0xe63a0000 0x12000>; }; icram1: sram@e63c0000 { @@ -527,22 +530,22 @@ compatible = "renesas,dmac-r8a7794", "renesas,rcar-dmac"; reg = <0 0xe6700000 0 0x20000>; - interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -560,22 +563,22 @@ compatible = "renesas,dmac-r8a7794", "renesas,rcar-dmac"; reg = <0 0xe6720000 0 0x20000>; - interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -1132,20 +1135,20 @@ compatible = "renesas,dmac-r8a7794", "renesas,rcar-dmac"; reg = <0 0xec700000 0 0x10000>; - interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", "ch8", "ch9", @@ -1176,10 +1179,10 @@ #size-cells = <2>; #interrupt-cells = <1>; ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>; - interrupt-map-mask = <0xff00 0 0 0x7>; - interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH - 0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH - 0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map-mask = <0xf800 0 0 0x7>; + interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; usb@1,0 { reg = <0x800 0 0 0 0>; @@ -1211,10 +1214,10 @@ #size-cells = <2>; #interrupt-cells = <1>; ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>; - interrupt-map-mask = <0xff00 0 0 0x7>; - interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH - 0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH - 0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map-mask = <0xf800 0 0 0x7>; + interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; usb@1,0 { reg = <0x10800 0 0 0 0>; diff --git a/arch/arm/boot/dts/rda8810pl.dtsi b/arch/arm/boot/dts/rda8810pl.dtsi index 19cde895bf65..f30d6ece49fb 100644 --- a/arch/arm/boot/dts/rda8810pl.dtsi +++ b/arch/arm/boot/dts/rda8810pl.dtsi @@ -33,6 +33,21 @@ ranges; }; + modem@10000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x10000000 0xfffffff>; + + gpioc@1a08000 { + compatible = "rda,8810pl-gpio"; + reg = <0x1a08000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + ngpios = <32>; + }; + }; + apb@20800000 { compatible = "simple-bus"; #address-cells = <1>; @@ -60,6 +75,39 @@ <17 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "hwtimer", "ostimer"; }; + + gpioa@30000 { + compatible = "rda,8810pl-gpio"; + reg = <0x30000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + ngpios = <32>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <12 IRQ_TYPE_LEVEL_HIGH>; + }; + + gpiob@31000 { + compatible = "rda,8810pl-gpio"; + reg = <0x31000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + ngpios = <32>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <13 IRQ_TYPE_LEVEL_HIGH>; + }; + + gpiod@32000 { + compatible = "rda,8810pl-gpio"; + reg = <0x32000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + ngpios = <32>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH>; + }; }; apb@20a00000 { diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi index 0290ea4edd32..cf36e25195b4 100644 --- a/arch/arm/boot/dts/rk3036.dtsi +++ b/arch/arm/boot/dts/rk3036.dtsi @@ -224,7 +224,7 @@ status = "disabled"; }; - sdmmc: dwmmc@10214000 { + sdmmc: mmc@10214000 { compatible = "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x10214000 0x4000>; clock-frequency = <37500000>; @@ -238,7 +238,7 @@ status = "disabled"; }; - sdio: dwmmc@10218000 { + sdio: mmc@10218000 { compatible = "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x10218000 0x4000>; max-frequency = <37500000>; @@ -252,7 +252,7 @@ status = "disabled"; }; - emmc: dwmmc@1021c000 { + emmc: mmc@1021c000 { compatible = "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x1021c000 0x4000>; interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; @@ -484,7 +484,7 @@ compatible = "rockchip,rockchip-spi"; reg = <0x20074000 0x1000>; interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; - clocks =<&cru PCLK_SPI>, <&cru SCLK_SPI>; + clocks = <&cru PCLK_SPI>, <&cru SCLK_SPI>; clock-names = "apb-pclk","spi_pclk"; dmas = <&pdma 8>, <&pdma 9>; dma-names = "tx", "rx"; @@ -696,8 +696,8 @@ hdmi { hdmi_ctl: hdmi-ctl { - rockchip,pins = <1 RK_PB0 1 &pcfg_pull_none>, - <1 RK_PB1 1 &pcfg_pull_none>, + rockchip,pins = <1 RK_PB0 1 &pcfg_pull_none>, + <1 RK_PB1 1 &pcfg_pull_none>, <1 RK_PB2 1 &pcfg_pull_none>, <1 RK_PB3 1 &pcfg_pull_none>; }; diff --git a/arch/arm/boot/dts/rk3188-bqedison2qc.dts b/arch/arm/boot/dts/rk3188-bqedison2qc.dts index c8b62bbd6a4a..ad1afd403052 100644 --- a/arch/arm/boot/dts/rk3188-bqedison2qc.dts +++ b/arch/arm/boot/dts/rk3188-bqedison2qc.dts @@ -466,9 +466,12 @@ pinctrl-names = "default"; pinctrl-0 = <&sd1_clk>, <&sd1_cmd>, <&sd1_bus4>; vmmcq-supply = <&vccio_wl>; + #address-cells = <1>; + #size-cells = <0>; status = "okay"; brcmf: wifi@1 { + reg = <1>; compatible = "brcm,bcm4329-fmac"; interrupt-parent = <&gpio3>; interrupts = <RK_PD2 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/rk3229-xms6.dts b/arch/arm/boot/dts/rk3229-xms6.dts new file mode 100644 index 000000000000..679fc2b00e5a --- /dev/null +++ b/arch/arm/boot/dts/rk3229-xms6.dts @@ -0,0 +1,283 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include "rk3229.dtsi" + +/ { + model = "Mecer Xtreme Mini S6"; + compatible = "mecer,xms6", "rockchip,rk3229"; + + memory@60000000 { + device_type = "memory"; + reg = <0x60000000 0x40000000>; + }; + + dc_12v: dc-12v-regulator { + compatible = "regulator-fixed"; + regulator-name = "dc_12v"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + ext_gmac: ext_gmac { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "ext_gmac"; + #clock-cells = <0>; + }; + + power-led { + compatible = "gpio-leds"; + + blue { + gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; + + vcc_host: vcc-host-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio3 RK_PC4 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&host_vbus_drv>; + regulator-name = "vcc_host"; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_sys>; + }; + + vcc_phy: vcc-phy-regulator { + compatible = "regulator-fixed"; + enable-active-high; + regulator-name = "vcc_phy"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vccio_1v8>; + }; + + vcc_sys: vcc-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc_12v>; + }; + + vccio_1v8: vccio-1v8-regulator { + compatible = "regulator-fixed"; + regulator-name = "vccio_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + vin-supply = <&vcc_sys>; + }; + + vccio_3v3: vccio-3v3-regulator { + compatible = "regulator-fixed"; + regulator-name = "vccio_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + vin-supply = <&vcc_sys>; + }; + + vdd_arm: vdd-arm-regulator { + compatible = "pwm-regulator"; + pwms = <&pwm1 0 25000 1>; + pwm-supply = <&vcc_sys>; + regulator-name = "vdd_arm"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_log: vdd-log-regulator { + compatible = "pwm-regulator"; + pwms = <&pwm2 0 25000 1>; + pwm-supply = <&vcc_sys>; + regulator-name = "vdd_log"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; +}; + +&cpu0 { + cpu-supply = <&vdd_arm>; +}; + +&cpu1 { + cpu-supply = <&vdd_arm>; +}; + +&cpu2 { + cpu-supply = <&vdd_arm>; +}; + +&cpu3 { + cpu-supply = <&vdd_arm>; +}; + +&emmc { + cap-mmc-highspeed; + disable-wp; + non-removable; + status = "okay"; +}; + +&gmac { + assigned-clocks = <&cru SCLK_MAC_SRC>; + assigned-clock-rates = <50000000>; + clock_in_out = "output"; + phy-handle = <&phy>; + phy-mode = "rmii"; + phy-supply = <&vcc_phy>; + status = "okay"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + phy: phy@0 { + compatible = "ethernet-phy-id1234.d400", + "ethernet-phy-ieee802.3-c22"; + reg = <0>; + clocks = <&cru SCLK_MAC_PHY>; + phy-is-integrated; + resets = <&cru SRST_MACPHY>; + }; + }; +}; + +&gpu { + mali-supply = <&vdd_log>; + status = "okay"; +}; + +&hdmi { + status = "okay"; +}; + +&hdmi_phy { + status = "okay"; +}; + +&iep_mmu { + status = "okay"; +}; + +&io_domains { + status = "okay"; + + vccio1-supply = <&vccio_3v3>; + vccio2-supply = <&vccio_1v8>; + vccio4-supply = <&vccio_3v3>; +}; + +&pinctrl { + usb { + host_vbus_drv: host-vbus-drv { + rockchip,pins = <3 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pwm1 { + status = "okay"; +}; + +&pwm2 { + status = "okay"; +}; + +&sdmmc { + cap-mmc-highspeed; + disable-wp; + status = "okay"; +}; + +&tsadc { + rockchip,hw-tshut-mode = <0>; + status = "okay"; +}; + +&u2phy0 { + status = "okay"; + + u2phy0_host: host-port { + phy-supply = <&vcc_host>; + status = "okay"; + }; + + u2phy0_otg: otg-port { + phy-supply = <&vcc_host>; + status = "okay"; + }; +}; + +&u2phy1 { + status = "okay"; + + u2phy1_host: host-port { + phy-supply = <&vcc_host>; + status = "okay"; + }; + + u2phy1_otg: otg-port { + phy-supply = <&vcc_host>; + status = "okay"; + }; +}; + +&uart2 { + pinctrl-0 = <&uart21_xfer>; + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&usb_host2_ehci { + status = "okay"; +}; + +&usb_host2_ohci { + status = "okay"; +}; + +&usb_otg { + status = "okay"; +}; + +&vop { + status = "okay"; +}; + +&vop_mmu { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi index 340ed6ccb08f..4e90efdc9630 100644 --- a/arch/arm/boot/dts/rk322x.dtsi +++ b/arch/arm/boot/dts/rk322x.dtsi @@ -662,7 +662,7 @@ }; }; - sdmmc: dwmmc@30000000 { + sdmmc: mmc@30000000 { compatible = "rockchip,rk3228-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x30000000 0x4000>; interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; @@ -675,7 +675,7 @@ status = "disabled"; }; - sdio: dwmmc@30010000 { + sdio: mmc@30010000 { compatible = "rockchip,rk3228-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x30010000 0x4000>; interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; @@ -688,7 +688,7 @@ status = "disabled"; }; - emmc: dwmmc@30020000 { + emmc: mmc@30020000 { compatible = "rockchip,rk3228-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x30020000 0x4000>; interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi index 820440715302..018802df4c0e 100644 --- a/arch/arm/boot/dts/rk3288-evb.dtsi +++ b/arch/arm/boot/dts/rk3288-evb.dtsi @@ -97,7 +97,7 @@ }; panel: panel { - compatible ="lg,lp079qx1-sp0v", "simple-panel"; + compatible = "lg,lp079qx1-sp0v"; backlight = <&backlight>; enable-gpios = <&gpio7 RK_PA4 GPIO_ACTIVE_HIGH>; pinctrl-0 = <&lcd_cs>; diff --git a/arch/arm/boot/dts/rk3288-fennec.dts b/arch/arm/boot/dts/rk3288-fennec.dts deleted file mode 100644 index 4847cf902a15..000000000000 --- a/arch/arm/boot/dts/rk3288-fennec.dts +++ /dev/null @@ -1,347 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) - -/dts-v1/; - -#include "rk3288.dtsi" - -/ { - model = "Rockchip RK3288 Fennec Board"; - compatible = "rockchip,rk3288-fennec", "rockchip,rk3288"; - - memory@0 { - reg = <0x0 0x0 0x0 0x80000000>; - device_type = "memory"; - }; - - ext_gmac: external-gmac-clock { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <125000000>; - clock-output-names = "ext_gmac"; - }; - - vcc_sys: vsys-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc_sys"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - regulator-boot-on; - }; -}; - -&cpu0 { - cpu0-supply = <&vdd_cpu>; -}; - -&emmc { - bus-width = <8>; - cap-mmc-highspeed; - non-removable; - pinctrl-names = "default"; - pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>; - status = "okay"; -}; - -&gmac { - assigned-clocks = <&cru SCLK_MAC>; - assigned-clock-parents = <&ext_gmac>; - clock_in_out = "input"; - pinctrl-names = "default"; - pinctrl-0 = <&rgmii_pins>, <&phy_rst>, <&phy_pmeb>, <&phy_int>; - phy-supply = <&vcc_lan>; - phy-mode = "rgmii"; - snps,reset-active-low; - snps,reset-delays-us = <0 10000 1000000>; - snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>; - tx_delay = <0x30>; - rx_delay = <0x10>; - status = "okay"; -}; - -&gpu { - mali-supply = <&vdd_gpu>; - status = "okay"; -}; - -&hdmi { - status = "okay"; -}; - -&i2c0 { - status = "okay"; - clock-frequency = <400000>; - - rk808: pmic@1b { - compatible = "rockchip,rk808"; - reg = <0x1b>; - interrupt-parent = <&gpio0>; - interrupts = <RK_PA4 IRQ_TYPE_LEVEL_LOW>; - #clock-cells = <1>; - clock-output-names = "xin32k", "rk808-clkout2"; - pinctrl-names = "default"; - pinctrl-0 = <&pmic_int &global_pwroff>; - rockchip,system-power-controller; - wakeup-source; - - vcc1-supply = <&vcc_sys>; - vcc2-supply = <&vcc_sys>; - vcc3-supply = <&vcc_sys>; - vcc4-supply = <&vcc_sys>; - vcc6-supply = <&vcc_sys>; - vcc7-supply = <&vcc_sys>; - vcc8-supply = <&vcc_io>; - vcc9-supply = <&vcc_io>; - vcc10-supply = <&vcc_io>; - vcc11-supply = <&vcc_io>; - vcc12-supply = <&vcc_io>; - vddio-supply = <&vcc_io>; - - regulators { - vdd_cpu: DCDC_REG1 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1350000>; - regulator-name = "vdd_arm"; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_gpu: DCDC_REG2 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <1250000>; - regulator-name = "vdd_gpu"; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1000000>; - }; - }; - - vcc_ddr: DCDC_REG3 { - regulator-always-on; - regulator-boot-on; - regulator-name = "vcc_ddr"; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - vcc_io: DCDC_REG4 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc_io"; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vccio_pmu: LDO_REG1 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vccio_pmu"; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vcca_33: LDO_REG2 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcca_33"; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_10: LDO_REG3 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-name = "vdd_10"; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1000000>; - }; - }; - - vcc_wl: LDO_REG4 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vcc_wl"; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vccio_sd: LDO_REG5 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vccio_sd"; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vdd10_lcd: LDO_REG6 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-name = "vdd10_lcd"; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1000000>; - }; - }; - - vcc_18: LDO_REG7 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vcc_18"; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vcc18_lcd: LDO_REG8 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vcc18_lcd"; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vcc_sd: SWITCH_REG1 { - regulator-always-on; - regulator-boot-on; - regulator-name = "vcc_sd"; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - vcc_lan: SWITCH_REG2 { - regulator-always-on; - regulator-boot-on; - regulator-name = "vcc_lan"; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - }; - }; -}; - -&pinctrl { - pcfg_output_high: pcfg-output-high { - output-high; - }; - - pcfg_output_low: pcfg-output-low { - output-low; - }; - - pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma { - drive-strength = <8>; - }; - - pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma { - bias-pull-up; - drive-strength = <8>; - }; - - gmac { - phy_int: phy-int { - rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>; - }; - - phy_pmeb: phy-pmeb { - rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>; - }; - - phy_rst: phy-rst { - rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_output_high>; - }; - }; - - pmic { - pmic_int: pmic-int { - rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - usbphy { - host_drv: host-drv { - rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; -}; - -&uart2 { - status = "okay"; -}; - -&usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&host_drv>; - vbus_drv-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>; - status = "okay"; -}; - -&usb_host0_ehci { - status = "okay"; -}; - -&usb_host1 { - status = "okay"; -}; - -&usb_otg { - status = "okay"; -}; - -&usb_hsic { - status = "okay"; -}; - -&vopb { - status = "okay"; -}; - -&vopb_mmu { - status = "okay"; -}; - -&vopl { - status = "okay"; -}; - -&vopl_mmu { - status = "okay"; -}; diff --git a/arch/arm/boot/dts/rk3288-rock2-som.dtsi b/arch/arm/boot/dts/rk3288-rock2-som.dtsi index 9f9e2bfd1295..44bb5e6f83b1 100644 --- a/arch/arm/boot/dts/rk3288-rock2-som.dtsi +++ b/arch/arm/boot/dts/rk3288-rock2-som.dtsi @@ -230,14 +230,14 @@ }; emmc { - emmc_reset: emmc-reset { - rockchip,pins = <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; - }; + emmc_reset: emmc-reset { + rockchip,pins = <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; + }; }; gmac { phy_rst: phy-rst { - rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_output_high>; + rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_output_high>; }; }; }; diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi b/arch/arm/boot/dts/rk3288-tinker.dtsi index 293576869546..312582c1bd37 100644 --- a/arch/arm/boot/dts/rk3288-tinker.dtsi +++ b/arch/arm/boot/dts/rk3288-tinker.dtsi @@ -47,13 +47,13 @@ compatible = "gpio-leds"; act-led { - gpios=<&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>; - linux,default-trigger="mmc0"; + gpios = <&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc0"; }; heartbeat-led { - gpios=<&gpio1 RK_PD1 GPIO_ACTIVE_HIGH>; - linux,default-trigger="heartbeat"; + gpios = <&gpio1 RK_PD1 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; }; pwr-led { @@ -113,6 +113,17 @@ cpu0-supply = <&vdd_cpu>; }; +&cpu_opp_table { + opp-1704000000 { + opp-hz = /bits/ 64 <1704000000>; + opp-microvolt = <1350000>; + }; + opp-1800000000 { + opp-hz = /bits/ 64 <1800000000>; + opp-microvolt = <1400000>; + }; +}; + &gmac { assigned-clocks = <&cru SCLK_MAC>; assigned-clock-parents = <&ext_gmac>; @@ -175,7 +186,7 @@ regulator-always-on; regulator-boot-on; regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1350000>; + regulator-max-microvolt = <1400000>; regulator-name = "vdd_arm"; regulator-ramp-delay = <6000>; regulator-state-mem { @@ -382,18 +393,15 @@ pmic { pmic_int: pmic-int { - rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO \ - &pcfg_pull_up>; + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>; }; dvs_1: dvs-1 { - rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO \ - &pcfg_pull_down>; + rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_down>; }; dvs_2: dvs-2 { - rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO \ - &pcfg_pull_down>; + rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>; }; }; @@ -406,8 +414,7 @@ }; sdmmc_clk: sdmmc-clk { - rockchip,pins = <6 RK_PC4 1 \ - &pcfg_pull_none_drv_8ma>; + rockchip,pins = <6 RK_PC4 1 &pcfg_pull_none_drv_8ma>; }; sdmmc_cmd: sdmmc-cmd { @@ -432,7 +439,7 @@ sdio { wifi_enable: wifi-enable { rockchip,pins = <4 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>, - <4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; + <4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; }; }; }; @@ -443,7 +450,7 @@ &saradc { vref-supply = <&vcc18_ldo1>; - status ="okay"; + status = "okay"; }; &sdmmc { @@ -516,7 +523,7 @@ }; &usb_otg { - status= "okay"; + status = "okay"; }; &vopb { diff --git a/arch/arm/boot/dts/rk3288-veyron-analog-audio.dtsi b/arch/arm/boot/dts/rk3288-veyron-analog-audio.dtsi index 445270aa136e..51208d161d65 100644 --- a/arch/arm/boot/dts/rk3288-veyron-analog-audio.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron-analog-audio.dtsi @@ -17,6 +17,7 @@ rockchip,hp-det-gpios = <&gpio6 RK_PA5 GPIO_ACTIVE_HIGH>; rockchip,mic-det-gpios = <&gpio6 RK_PB3 GPIO_ACTIVE_LOW>; rockchip,headset-codec = <&headsetcodec>; + rockchip,hdmi-codec = <&hdmi>; }; }; diff --git a/arch/arm/boot/dts/rk3288-veyron-brain.dts b/arch/arm/boot/dts/rk3288-veyron-brain.dts index 406146cbff29..aa33d09184ad 100644 --- a/arch/arm/boot/dts/rk3288-veyron-brain.dts +++ b/arch/arm/boot/dts/rk3288-veyron-brain.dts @@ -7,6 +7,7 @@ /dts-v1/; #include "rk3288-veyron.dtsi" +#include "rk3288-veyron-broadcom-bluetooth.dtsi" / { model = "Google Brain"; @@ -40,6 +41,14 @@ }; &pinctrl { + pinctrl-names = "default"; + pinctrl-0 = < + /* Common for sleep and wake, but no owners */ + &ddr0_retention + &ddrio_pwroff + &global_pwroff + >; + hdmi { vcc50_hdmi_en: vcc50-hdmi-en { rockchip,pins = <7 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; diff --git a/arch/arm/boot/dts/rk3288-veyron-broadcom-bluetooth.dtsi b/arch/arm/boot/dts/rk3288-veyron-broadcom-bluetooth.dtsi new file mode 100644 index 000000000000..a10d25ac8f7b --- /dev/null +++ b/arch/arm/boot/dts/rk3288-veyron-broadcom-bluetooth.dtsi @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Veyron (and derivatives) fragment for the Broadcom 43450 bluetooth + * chip. + * + * Copyright 2019 Google, Inc + */ + +&uart0 { + bluetooth { + pinctrl-names = "default"; + pinctrl-0 = <&bt_host_wake_l>, <&bt_enable_l>, + <&bt_dev_wake>; + + compatible = "brcm,bcm43540-bt"; + host-wakeup-gpios = <&gpio4 RK_PD7 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio4 RK_PD5 GPIO_ACTIVE_HIGH>; + device-wakeup-gpios = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; + max-speed = <3000000>; + brcm,bt-pcm-int-params = [01 02 00 01 01]; + }; +}; diff --git a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi index 1cadb522fd0d..05112c25176d 100644 --- a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi @@ -10,6 +10,7 @@ #include <dt-bindings/input/input.h> #include "rk3288-veyron.dtsi" #include "rk3288-veyron-analog-audio.dtsi" +#include "rk3288-veyron-edp.dtsi" #include "rk3288-veyron-sdmmc.dtsi" / { @@ -18,50 +19,6 @@ i2c20 = &i2c_tunnel; }; - backlight: backlight { - compatible = "pwm-backlight"; - brightness-levels = < - 0 1 2 3 4 5 6 7 - 8 9 10 11 12 13 14 15 - 16 17 18 19 20 21 22 23 - 24 25 26 27 28 29 30 31 - 32 33 34 35 36 37 38 39 - 40 41 42 43 44 45 46 47 - 48 49 50 51 52 53 54 55 - 56 57 58 59 60 61 62 63 - 64 65 66 67 68 69 70 71 - 72 73 74 75 76 77 78 79 - 80 81 82 83 84 85 86 87 - 88 89 90 91 92 93 94 95 - 96 97 98 99 100 101 102 103 - 104 105 106 107 108 109 110 111 - 112 113 114 115 116 117 118 119 - 120 121 122 123 124 125 126 127 - 128 129 130 131 132 133 134 135 - 136 137 138 139 140 141 142 143 - 144 145 146 147 148 149 150 151 - 152 153 154 155 156 157 158 159 - 160 161 162 163 164 165 166 167 - 168 169 170 171 172 173 174 175 - 176 177 178 179 180 181 182 183 - 184 185 186 187 188 189 190 191 - 192 193 194 195 196 197 198 199 - 200 201 202 203 204 205 206 207 - 208 209 210 211 212 213 214 215 - 216 217 218 219 220 221 222 223 - 224 225 226 227 228 229 230 231 - 232 233 234 235 236 237 238 239 - 240 241 242 243 244 245 246 247 - 248 249 250 251 252 253 254 255>; - default-brightness-level = <128>; - enable-gpios = <&gpio7 RK_PA2 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&bl_en>; - pwms = <&pwm0 0 1000000 0>; - post-pwm-on-delay-ms = <10>; - pwm-off-delay-ms = <10>; - }; - gpio-charger { compatible = "gpio-charger"; charger-type = "mains"; @@ -85,21 +42,6 @@ }; }; - panel: panel { - compatible ="innolux,n116bge", "simple-panel"; - status = "okay"; - power-supply = <&vcc33_lcd>; - backlight = <&backlight>; - - ports { - panel_in: port { - panel_in_edp: endpoint { - remote-endpoint = <&edp_out_panel>; - }; - }; - }; - }; - /* A non-regulated voltage from power supply or battery */ vccsys: vccsys { compatible = "regulator-fixed"; @@ -141,33 +83,6 @@ }; }; -&edp { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&edp_hpd>; - - ports { - edp_out: port@1 { - reg = <1>; - #address-cells = <1>; - #size-cells = <0>; - edp_out_panel: endpoint@0 { - reg = <0>; - remote-endpoint = <&panel_in_edp>; - }; - }; - }; -}; - -&edp_phy { - status = "okay"; -}; - -&pwm0 { - status = "okay"; -}; - &rk808 { vcc11-supply = <&vcc_5v>; @@ -220,42 +135,7 @@ }; }; -&vopl { - status = "okay"; -}; - -&vopl_mmu { - status = "okay"; -}; - &pinctrl { - pinctrl-0 = < - /* Common for sleep and wake, but no owners */ - &ddr0_retention - &ddrio_pwroff - &global_pwroff - - /* Wake only */ - &suspend_l_wake - &bt_dev_wake_awake - >; - pinctrl-1 = < - /* Common for sleep and wake, but no owners */ - &ddr0_retention - &ddrio_pwroff - &global_pwroff - - /* Sleep only */ - &suspend_l_sleep - &bt_dev_wake_sleep - >; - - backlight { - bl_en: bl-en { - rockchip,pins = <7 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - buttons { ap_lid_int_l: ap-lid-int-l { rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>; diff --git a/arch/arm/boot/dts/rk3288-veyron-edp.dtsi b/arch/arm/boot/dts/rk3288-veyron-edp.dtsi new file mode 100644 index 000000000000..32c0f10765dd --- /dev/null +++ b/arch/arm/boot/dts/rk3288-veyron-edp.dtsi @@ -0,0 +1,141 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Veyron (and derivatives) fragment for the edp displays + * + * Copyright 2019 Google LLC + */ + +/ { + backlight_regulator: backlight-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio2 RK_PB4 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&bl_pwr_en>; + regulator-name = "backlight_regulator"; + vin-supply = <&vcc33_sys>; + startup-delay-us = <15000>; + }; + + panel_regulator: panel-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio7 RK_PB6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&lcd_enable_h>; + regulator-name = "panel_regulator"; + vin-supply = <&vcc33_sys>; + }; + + vcc18_lcd: vcc18-lcd { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&avdd_1v8_disp_en>; + regulator-name = "vcc18_lcd"; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc18_wl>; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + brightness-levels = <0 255>; + num-interpolated-steps = <255>; + default-brightness-level = <128>; + enable-gpios = <&gpio7 RK_PA2 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&bl_en>; + pwms = <&pwm0 0 1000000 0>; + post-pwm-on-delay-ms = <10>; + pwm-off-delay-ms = <10>; + power-supply = <&backlight_regulator>; + }; + + panel: panel { + compatible = "innolux,n116bge"; + status = "okay"; + power-supply = <&panel_regulator>; + backlight = <&backlight>; + + panel-timing { + clock-frequency = <74250000>; + hactive = <1366>; + hfront-porch = <136>; + hback-porch = <60>; + hsync-len = <30>; + hsync-active = <0>; + vactive = <768>; + vfront-porch = <8>; + vback-porch = <12>; + vsync-len = <12>; + vsync-active = <0>; + }; + + ports { + panel_in: port { + panel_in_edp: endpoint { + remote-endpoint = <&edp_out_panel>; + }; + }; + }; + }; +}; + +&edp { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&edp_hpd>; + + ports { + edp_out: port@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + edp_out_panel: endpoint@0 { + reg = <0>; + remote-endpoint = <&panel_in_edp>; + }; + }; + }; +}; + +&edp_phy { + status = "okay"; +}; + +&pwm0 { + status = "okay"; +}; + +&vopl { + status = "okay"; +}; + +&vopl_mmu { + status = "okay"; +}; + +&pinctrl { + backlight { + bl_pwr_en: bl_pwr_en { + rockchip,pins = <2 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bl_en: bl-en { + rockchip,pins = <7 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + lcd { + lcd_enable_h: lcd-en { + rockchip,pins = <7 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + avdd_1v8_disp_en: avdd-1v8-disp-en { + rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; diff --git a/arch/arm/boot/dts/rk3288-veyron-fievel.dts b/arch/arm/boot/dts/rk3288-veyron-fievel.dts new file mode 100644 index 000000000000..309b122b4d0d --- /dev/null +++ b/arch/arm/boot/dts/rk3288-veyron-fievel.dts @@ -0,0 +1,528 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Veyron Fievel Rev 0+ board device tree source + * + * Copyright 2016 Google, Inc + */ + +/dts-v1/; +#include "rk3288-veyron.dtsi" +#include "rk3288-veyron-analog-audio.dtsi" + +/ { + model = "Google Fievel"; + compatible = "google,veyron-fievel-rev8", "google,veyron-fievel-rev7", + "google,veyron-fievel-rev6", "google,veyron-fievel-rev5", + "google,veyron-fievel-rev4", "google,veyron-fievel-rev3", + "google,veyron-fievel-rev2", "google,veyron-fievel-rev1", + "google,veyron-fievel-rev0", "google,veyron-fievel", + "google,veyron", "rockchip,rk3288"; + + vccsys: vccsys { + compatible = "regulator-fixed"; + regulator-name = "vccsys"; + regulator-boot-on; + regulator-always-on; + }; + + /* + * vcc33_pmuio and vcc33_io is sourced directly from vcc33_sys, + * enabled by vcc_18 + */ + vcc33_io: vcc33-io { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc33_io"; + }; + + vcc5_host1: vcc5-host1-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio5 RK_PC2 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hub_usb1_pwr_en>; + regulator-name = "vcc5_host1"; + regulator-always-on; + regulator-boot-on; + }; + + vcc5_host2: vcc5-host2-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio5 RK_PB6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hub_usb2_pwr_en>; + regulator-name = "vcc5_host2"; + regulator-always-on; + regulator-boot-on; + }; + + vcc5v_otg: vcc5v-otg-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_otg_pwr_en>; + regulator-name = "vcc5_otg"; + regulator-always-on; + regulator-boot-on; + }; + + ext_gmac: external-gmac-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + clock-output-names = "ext_gmac"; + }; +}; + +&gmac { + status = "okay"; + + assigned-clocks = <&cru SCLK_MAC>; + assigned-clock-parents = <&ext_gmac>; + clock_in_out = "input"; + phy-handle = <ðphy>; + phy-mode = "rgmii"; + phy-supply = <&vcc33_lan>; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>, <&phy_rst>, <&phy_pmeb>, <&phy_int>; + rx_delay = <0x10>; + tx_delay = <0x30>; + + /* + * Reset for the RTL8211 PHY which requires a 10-ms reset pulse (low) + * with a 30ms settling time. + */ + snps,reset-gpio = <&gpio4 RK_PB0 0>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 30000>; + wakeup-source; + + mdio0 { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + ethphy: ethernet-phy@1 { + reg = <1>; + }; + }; +}; + +&rk808 { + dvs-gpios = <&gpio7 RK_PB4 GPIO_ACTIVE_HIGH>, + <&gpio7 RK_PB7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>; + + vcc6-supply = <&vcc33_sys>; + vcc10-supply = <&vcc33_sys>; + vcc11-supply = <&vcc_5v>; + vcc12-supply = <&vcc33_sys>; + + regulators { + /delete-node/ LDO_REG1; + + /* + * According to the schematic, vcc18_lcdt is for + * HDMI_AVDD_1V8 + */ + vcc18_lcdt: LDO_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vdd18_lcdt"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + /* + * This is not a pwren anymore, but the real power supply, + * vdd10_lcd for HDMI_AVDD_1V0 + */ + vdd10_lcd: LDO_REG7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-name = "vdd10_lcd"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + /* for usb camera */ + vcc33_ccd: LDO_REG8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc33_ccd"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc33_lan: SWITCH_REG2 { + regulator-name = "vcc33_lan"; + }; + }; +}; + +&sdio0 { + #address-cells = <1>; + #size-cells = <0>; + + btmrvl: btmrvl@2 { + compatible = "marvell,sd8897-bt"; + reg = <2>; + interrupt-parent = <&gpio4>; + interrupts = <RK_PD7 IRQ_TYPE_LEVEL_LOW>; + marvell,wakeup-pin = /bits/ 16 <13>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_host_wake_l>; + }; +}; + +&vcc50_hdmi { + enable-active-high; + gpio = <&gpio5 RK_PC3 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc50_hdmi_en>; +}; + +&vcc_5v { + enable-active-high; + gpio = <&gpio7 RK_PC5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&drv_5v>; +}; + +&gpio0 { + gpio-line-names = "PMIC_SLEEP_AP", + "DDRIO_PWROFF", + "DDRIO_RETEN", + "TS3A227E_INT_L", + "PMIC_INT_L", + "PWR_KEY_L", + "HUB_USB1_nFALUT", + "PHY_PMEB", + + "PHY_INT", + /* + * RECOVERY_SW_L is Chrome OS ABI. Schematics call + * it REC_MODE_L. + */ + "RECOVERY_SW_L", + "OTP_OUT", + "", + "USB_OTG_POWER_EN", + "AP_WARM_RESET_H", + "USB_OTG_nFALUT", + "I2C0_SDA_PMIC", + + "I2C0_SCL_PMIC", + "DEVMODE_L", + "USB_INT"; +}; + +&gpio2 { + gpio-line-names = "CONFIG0", + "CONFIG1", + "CONFIG2", + "", + "", + "", + "", + "CONFIG3", + + "", + "EMMC_RST_L", + "", + "", + "BL_PWR_EN", + "", + "TOUCH_INT", + "TOUCH_RST", + + "I2C3_SCL_TP", + "I2C3_SDA_TP"; +}; + +&gpio3 { + gpio-line-names = "FLASH0_D0", + "FLASH0_D1", + "FLASH0_D2", + "FLASH0_D3", + "FLASH0_D4", + "FLASH0_D5", + "FLASH0_D6", + "FLASH0_D7", + + "VCC5V_GOOD_H", + "", + "", + "", + "", + "", + "", + "", + + "FLASH0_CS2/EMMC_CMD", + "", + "FLASH0_DQS/EMMC_CLKO", + "", + "", + "", + "", + "", + + "PHY_TXD2", + "PHY_TXD3", + "MAC_RXD2", + "MAC_RXD3", + "PHY_TXD0", + "PHY_TXD1", + "MAC_RXD0", + "MAC_RXD1"; +}; + +&gpio4 { + gpio-line-names = "MAC_MDC", + "MAC_RXDV", + "MAC_RXER", + "MAC_CLK", + "PHY_TXEN", + "MAC_MDIO", + "MAC_RXCLK", + "", + + "PHY_RST", + "PHY_TXCLK", + "", + "", + "", + "", + "", + "", + + "UART0_RXD", + "UART0_TXD", + "UART0_CTS_L", + "UART0_RTS_L", + "SDIO0_D0", + "SDIO0_D1", + "SDIO0_D2", + "SDIO0_D3", + + "SDIO0_CMD", + "SDIO0_CLK", + "BT_DEV_WAKE", + "", + "WIFI_ENABLE_H", + "BT_ENABLE_L", + "WIFI_HOST_WAKE", + "BT_HOST_WAKE"; +}; + +&gpio5 { + gpio-line-names = "", + "", + "", + "", + "", + "", + "", + "", + + "", + "", + "", + "", + "USB_OTG_CTL1", + "HUB_USB2_CTL1", + "HUB_USB2_PWR_EN", + "HUB_USB_ILIM_SEL", + + "USB_OTG_STATUS_L", + "HUB_USB1_CTL1", + "HUB_USB1_PWR_EN", + "VCC50_HDMI_EN"; +}; + +&gpio6 { + gpio-line-names = "I2S0_SCLK", + "I2S0_LRCK_RX", + "I2S0_LRCK_TX", + "I2S0_SDI", + "I2S0_SDO0", + "HP_DET_H", + "", + "INT_CODEC", + + "I2S0_CLK", + "I2C2_SDA", + "I2C2_SCL", + "MICDET", + "", + "", + "", + "", + + "HUB_USB2_nFALUT", + "USB_OTG_ILIM_SEL"; +}; + +&gpio7 { + gpio-line-names = "LCD_BL_PWM", + "PWM_LOG", + "BL_EN", + "PWR_LED1", + "TPM_INT_H", + "SPK_ON", + /* + * AP_FLASH_WP_L is Chrome OS ABI. Schematics call + * it FW_WP_AP. + */ + "AP_FLASH_WP_L", + "", + + "CPU_NMI", + "DVSOK", + "", + "EDP_HPD", + "DVS1", + "", + "LCD_EN", + "DVS2", + + "HDMI_CEC", + "I2C4_SDA", + "I2C4_SCL", + "I2C5_SDA_HDMI", + "I2C5_SCL_HDMI", + "5V_DRV", + "UART2_RXD", + "UART2_TXD"; +}; + +&gpio8 { + gpio-line-names = "RAM_ID0", + "RAM_ID1", + "RAM_ID2", + "RAM_ID3", + "I2C1_SDA_TPM", + "I2C1_SCL_TPM", + "SPI2_CLK", + "SPI2_CS0", + + "SPI2_RXD", + "SPI2_TXD"; +}; + +&pinctrl { + pinctrl-names = "default", "sleep"; + pinctrl-0 = < + /* Common for sleep and wake, but no owners */ + &ddr0_retention + &ddrio_pwroff + &global_pwroff + + /* For usb bc1.2 */ + &usb_otg_ilim_sel + &usb_usb_ilim_sel + + /* Wake only */ + &bt_dev_wake_awake + &pwr_led1_on + >; + + pinctrl-1 = < + /* Common for sleep and wake, but no owners */ + &ddr0_retention + &ddrio_pwroff + &global_pwroff + + /* For usb bc1.2 */ + &usb_otg_ilim_sel + &usb_usb_ilim_sel + + /* Sleep only */ + &bt_dev_wake_sleep + &pwr_led1_blink + >; + + buck-5v { + drv_5v: drv-5v { + rockchip,pins = <7 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + gmac { + phy_rst: phy-rst { + rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_output_high>; + }; + + phy_pmeb: phy-pmeb { + rockchip,pins = <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + phy_int: phy-int { + rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + hdmi { + vcc50_hdmi_en: vcc50-hdmi-en { + rockchip,pins = <5 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + leds { + pwr_led1_on: pwr-led1-on { + rockchip,pins = <7 RK_PA3 RK_FUNC_GPIO &pcfg_output_low>; + }; + + pwr_led1_blink: pwr-led1-blink { + rockchip,pins = <7 RK_PA3 RK_FUNC_GPIO &pcfg_output_high>; + }; + }; + + pmic { + dvs_1: dvs-1 { + rockchip,pins = <7 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + dvs_2: dvs-2 { + rockchip,pins = <7 RK_PB7 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + usb-bc12 { + usb_otg_ilim_sel: usb-otg-ilim-sel { + rockchip,pins = <6 RK_PC1 RK_FUNC_GPIO &pcfg_output_low>; + }; + + usb_usb_ilim_sel: usb-usb-ilim-sel { + rockchip,pins = <5 RK_PB7 RK_FUNC_GPIO &pcfg_output_low>; + }; + }; + + usb-host { + hub_usb1_pwr_en: hub_usb1_pwr_en { + rockchip,pins = <5 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + hub_usb2_pwr_en: hub_usb2_pwr_en { + rockchip,pins = <5 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + usb_otg_pwr_en: usb_otg_pwr_en { + rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; diff --git a/arch/arm/boot/dts/rk3288-veyron-jaq.dts b/arch/arm/boot/dts/rk3288-veyron-jaq.dts index fcd119168cb6..171ba6185b6d 100644 --- a/arch/arm/boot/dts/rk3288-veyron-jaq.dts +++ b/arch/arm/boot/dts/rk3288-veyron-jaq.dts @@ -16,82 +16,12 @@ "google,veyron-jaq-rev3", "google,veyron-jaq-rev2", "google,veyron-jaq-rev1", "google,veyron-jaq", "google,veyron", "rockchip,rk3288"; - - panel_regulator: panel-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio7 RK_PB6 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&lcd_enable_h>; - regulator-name = "panel_regulator"; - startup-delay-us = <100000>; - vin-supply = <&vcc33_sys>; - }; - - vcc18_lcd: vcc18-lcd { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&avdd_1v8_disp_en>; - regulator-name = "vcc18_lcd"; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vcc18_wl>; - }; - - backlight_regulator: backlight-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio2 RK_PB4 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&bl_pwr_en>; - regulator-name = "backlight_regulator"; - vin-supply = <&vcc33_sys>; - startup-delay-us = <15000>; - }; }; &backlight { /* Jaq panel PWM must be >= 3%, so start non-zero brightness at 8 */ - brightness-levels = < - 0 - 8 9 10 11 12 13 14 15 - 16 17 18 19 20 21 22 23 - 24 25 26 27 28 29 30 31 - 32 33 34 35 36 37 38 39 - 40 41 42 43 44 45 46 47 - 48 49 50 51 52 53 54 55 - 56 57 58 59 60 61 62 63 - 64 65 66 67 68 69 70 71 - 72 73 74 75 76 77 78 79 - 80 81 82 83 84 85 86 87 - 88 89 90 91 92 93 94 95 - 96 97 98 99 100 101 102 103 - 104 105 106 107 108 109 110 111 - 112 113 114 115 116 117 118 119 - 120 121 122 123 124 125 126 127 - 128 129 130 131 132 133 134 135 - 136 137 138 139 140 141 142 143 - 144 145 146 147 148 149 150 151 - 152 153 154 155 156 157 158 159 - 160 161 162 163 164 165 166 167 - 168 169 170 171 172 173 174 175 - 176 177 178 179 180 181 182 183 - 184 185 186 187 188 189 190 191 - 192 193 194 195 196 197 198 199 - 200 201 202 203 204 205 206 207 - 208 209 210 211 212 213 214 215 - 216 217 218 219 220 221 222 223 - 224 225 226 227 228 229 230 231 - 232 233 234 235 236 237 238 239 - 240 241 242 243 244 245 246 247 - 248 249 250 251 252 253 254 255>; - power-supply = <&backlight_regulator>; -}; - -&panel { - power-supply = <&panel_regulator>; + brightness-levels = <0 8 255>; + num-interpolated-steps = <247>; }; &rk808 { @@ -343,11 +273,27 @@ }; &pinctrl { - backlight { - bl_pwr_en: bl_pwr_en { - rockchip,pins = <2 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; + pinctrl-names = "default", "sleep"; + pinctrl-0 = < + /* Common for sleep and wake, but no owners */ + &ddr0_retention + &ddrio_pwroff + &global_pwroff + + /* Wake only */ + &suspend_l_wake + &bt_dev_wake_awake + >; + pinctrl-1 = < + /* Common for sleep and wake, but no owners */ + &ddr0_retention + &ddrio_pwroff + &global_pwroff + + /* Sleep only */ + &suspend_l_sleep + &bt_dev_wake_sleep + >; buck-5v { drv_5v: drv-5v { @@ -361,16 +307,6 @@ }; }; - lcd { - lcd_enable_h: lcd-en { - rockchip,pins = <7 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - avdd_1v8_disp_en: avdd-1v8-disp-en { - rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - pmic { dvs_1: dvs-1 { rockchip,pins = <7 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>; diff --git a/arch/arm/boot/dts/rk3288-veyron-jerry.dts b/arch/arm/boot/dts/rk3288-veyron-jerry.dts index 164561f04c1d..66f00d28801a 100644 --- a/arch/arm/boot/dts/rk3288-veyron-jerry.dts +++ b/arch/arm/boot/dts/rk3288-veyron-jerry.dts @@ -18,48 +18,6 @@ "google,veyron-jerry-rev5", "google,veyron-jerry-rev4", "google,veyron-jerry-rev3", "google,veyron-jerry", "google,veyron", "rockchip,rk3288"; - - panel_regulator: panel-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio7 RK_PB6 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&lcd_enable_h>; - regulator-name = "panel_regulator"; - startup-delay-us = <100000>; - vin-supply = <&vcc33_sys>; - }; - - vcc18_lcd: vcc18-lcd { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&avdd_1v8_disp_en>; - regulator-name = "vcc18_lcd"; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vcc18_wl>; - }; - - backlight_regulator: backlight-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio2 RK_PB4 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&bl_pwr_en>; - regulator-name = "backlight_regulator"; - vin-supply = <&vcc33_sys>; - startup-delay-us = <15000>; - }; -}; - -&backlight { - power-supply = <&backlight_regulator>; -}; - -&panel { - power-supply= <&panel_regulator>; }; &rk808 { @@ -82,6 +40,155 @@ }; }; +&sdio0 { + #address-cells = <1>; + #size-cells = <0>; + + mwifiex: wifi@1 { + compatible = "marvell,sd8897"; + reg = <1>; + + marvell,caldata-txpwrlimit-2g = /bits/ 8 < +0x01 0x00 0x06 0x00 0x08 0x02 0x89 0x01 +0x24 0x00 0x67 0x09 0x14 0x01 0x00 0x0f 0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0c +0x05 0x0c 0x06 0x0c 0x07 0x09 0x08 0x09 0x09 0x09 0x0a 0x0c 0x0b 0x0c 0x0c 0x0c +0x0d 0x09 0x0e 0x09 0x0f 0x09 0x89 0x01 0x24 0x00 0x67 0x09 0x14 0x02 0x00 0x0f +0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0c 0x05 0x0c 0x06 0x0c 0x07 0x09 0x08 0x09 +0x09 0x09 0x0a 0x0c 0x0b 0x0c 0x0c 0x0c 0x0d 0x09 0x0e 0x09 0x0f 0x09 0x89 0x01 +0x24 0x00 0x67 0x09 0x14 0x03 0x00 0x0f 0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0c +0x05 0x0c 0x06 0x0c 0x07 0x09 0x08 0x09 0x09 0x09 0x0a 0x0c 0x0b 0x0c 0x0c 0x0c +0x0d 0x09 0x0e 0x09 0x0f 0x09 0x89 0x01 0x24 0x00 0x67 0x09 0x14 0x04 0x00 0x0f +0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0c 0x05 0x0c 0x06 0x0c 0x07 0x09 0x08 0x09 +0x09 0x09 0x0a 0x0c 0x0b 0x0c 0x0c 0x0c 0x0d 0x09 0x0e 0x09 0x0f 0x09 0x89 0x01 +0x24 0x00 0x67 0x09 0x14 0x05 0x00 0x0f 0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0c +0x05 0x0c 0x06 0x0c 0x07 0x09 0x08 0x09 0x09 0x09 0x0a 0x0c 0x0b 0x0c 0x0c 0x0c +0x0d 0x09 0x0e 0x09 0x0f 0x09 0x89 0x01 0x24 0x00 0x67 0x09 0x14 0x06 0x00 0x0f +0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0c 0x05 0x0c 0x06 0x0c 0x07 0x09 0x08 0x09 +0x09 0x09 0x0a 0x0c 0x0b 0x0c 0x0c 0x0c 0x0d 0x09 0x0e 0x09 0x0f 0x09 0x89 0x01 +0x24 0x00 0x67 0x09 0x14 0x07 0x00 0x0f 0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0c +0x05 0x0c 0x06 0x0c 0x07 0x09 0x08 0x09 0x09 0x09 0x0a 0x0c 0x0b 0x0c 0x0c 0x0c +0x0d 0x09 0x0e 0x09 0x0f 0x09 0x89 0x01 0x24 0x00 0x67 0x09 0x14 0x08 0x00 0x0f +0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0c 0x05 0x0c 0x06 0x0c 0x07 0x09 0x08 0x09 +0x09 0x09 0x0a 0x0c 0x0b 0x0c 0x0c 0x0c 0x0d 0x09 0x0e 0x09 0x0f 0x09 0x89 0x01 +0x24 0x00 0x67 0x09 0x14 0x09 0x00 0x0f 0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0c +0x05 0x0c 0x06 0x0c 0x07 0x09 0x08 0x09 0x09 0x09 0x0a 0x0c 0x0b 0x0c 0x0c 0x0c +0x0d 0x09 0x0e 0x09 0x0f 0x09 0x89 0x01 0x24 0x00 0x67 0x09 0x14 0x0a 0x00 0x0f +0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0c 0x05 0x0c 0x06 0x0c 0x07 0x09 0x08 0x09 +0x09 0x09 0x0a 0x0c 0x0b 0x0c 0x0c 0x0c 0x0d 0x09 0x0e 0x09 0x0f 0x09 0x89 0x01 +0x24 0x00 0x67 0x09 0x14 0x0b 0x00 0x0f 0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0c +0x05 0x0c 0x06 0x0c 0x07 0x09 0x08 0x09 0x09 0x09 0x0a 0x0c 0x0b 0x0c 0x0c 0x0c +0x0d 0x09 0x0e 0x09 0x0f 0x09 0x89 0x01 0x24 0x00 0x67 0x09 0x14 0x0c 0x00 0x0f +0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0c 0x05 0x0c 0x06 0x0c 0x07 0x09 0x08 0x09 +0x09 0x09 0x0a 0x0c 0x0b 0x0c 0x0c 0x0c 0x0d 0x09 0x0e 0x09 0x0f 0x09 0x89 0x01 +0x24 0x00 0x67 0x09 0x14 0x0d 0x00 0x0f 0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0c +0x05 0x0c 0x06 0x0c 0x07 0x09 0x08 0x09 0x09 0x09 0x0a 0x0c 0x0b 0x0c 0x0c 0x0c +0x0d 0x09 0x0e 0x09 0x0f 0x09>; + + marvell,caldata-txpwrlimit-5g-sub0 = /bits/ 8 < +0x01 0x00 0x06 0x00 0xf0 0x01 0x89 0x01 +0x3a 0x00 0x88 0x13 0x14 0x24 0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0a 0x05 0x0a +0x06 0x0a 0x07 0x09 0x08 0x09 0x09 0x09 0x0a 0x0a 0x0b 0x0a 0x0c 0x0a 0x0d 0x09 +0x0e 0x09 0x0f 0x09 0x10 0x05 0x11 0x05 0x12 0x05 0x13 0x05 0x14 0x05 0x15 0x05 +0x16 0x05 0x17 0x05 0x18 0x05 0x19 0x05 0x1a 0x05 0x1b 0x05 0x89 0x01 0x3a 0x00 +0x88 0x13 0x14 0x28 0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0a 0x05 0x0a 0x06 0x0a +0x07 0x09 0x08 0x09 0x09 0x09 0x0a 0x0a 0x0b 0x0a 0x0c 0x0a 0x0d 0x09 0x0e 0x09 +0x0f 0x09 0x10 0x05 0x11 0x05 0x12 0x05 0x13 0x05 0x14 0x05 0x15 0x05 0x16 0x05 +0x17 0x05 0x18 0x05 0x19 0x05 0x1a 0x05 0x1b 0x05 0x89 0x01 0x3a 0x00 0x88 0x13 +0x14 0x2c 0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0a 0x05 0x0a 0x06 0x0a 0x07 0x09 +0x08 0x09 0x09 0x09 0x0a 0x0a 0x0b 0x0a 0x0c 0x0a 0x0d 0x09 0x0e 0x09 0x0f 0x09 +0x10 0x05 0x11 0x05 0x12 0x05 0x13 0x05 0x14 0x05 0x15 0x05 0x16 0x05 0x17 0x05 +0x18 0x05 0x19 0x05 0x1a 0x05 0x1b 0x05 0x89 0x01 0x3a 0x00 0x88 0x13 0x14 0x30 +0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0a 0x05 0x0a 0x06 0x0a 0x07 0x09 0x08 0x09 +0x09 0x09 0x0a 0x0a 0x0b 0x0a 0x0c 0x0a 0x0d 0x09 0x0e 0x09 0x0f 0x09 0x10 0x05 +0x11 0x05 0x12 0x05 0x13 0x05 0x14 0x05 0x15 0x05 0x16 0x05 0x17 0x05 0x18 0x05 +0x19 0x05 0x1a 0x05 0x1b 0x05 0x89 0x01 0x3a 0x00 0x88 0x13 0x14 0x34 0x01 0x0c +0x02 0x0c 0x03 0x0c 0x04 0x0a 0x05 0x0a 0x06 0x0a 0x07 0x09 0x08 0x09 0x09 0x09 +0x0a 0x0a 0x0b 0x0a 0x0c 0x0a 0x0d 0x09 0x0e 0x09 0x0f 0x09 0x10 0x05 0x11 0x05 +0x12 0x05 0x13 0x05 0x14 0x05 0x15 0x05 0x16 0x05 0x17 0x05 0x18 0x05 0x19 0x05 +0x1a 0x05 0x1b 0x05 0x89 0x01 0x3a 0x00 0x88 0x13 0x14 0x38 0x01 0x0c 0x02 0x0c +0x03 0x0c 0x04 0x0a 0x05 0x0a 0x06 0x0a 0x07 0x09 0x08 0x09 0x09 0x09 0x0a 0x0a +0x0b 0x0a 0x0c 0x0a 0x0d 0x09 0x0e 0x09 0x0f 0x09 0x10 0x05 0x11 0x05 0x12 0x05 +0x13 0x05 0x14 0x05 0x15 0x05 0x16 0x05 0x17 0x05 0x18 0x05 0x19 0x05 0x1a 0x05 +0x1b 0x05 0x89 0x01 0x3a 0x00 0x88 0x13 0x14 0x3c 0x01 0x0c 0x02 0x0c 0x03 0x0c +0x04 0x0a 0x05 0x0a 0x06 0x0a 0x07 0x09 0x08 0x09 0x09 0x09 0x0a 0x0a 0x0b 0x0a +0x0c 0x0a 0x0d 0x09 0x0e 0x09 0x0f 0x09 0x10 0x05 0x11 0x05 0x12 0x05 0x13 0x05 +0x14 0x05 0x15 0x05 0x16 0x05 0x17 0x05 0x18 0x05 0x19 0x05 0x1a 0x05 0x1b 0x05 +0x89 0x01 0x3a 0x00 0x88 0x13 0x14 0x40 0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0a +0x05 0x0a 0x06 0x0a 0x07 0x09 0x08 0x09 0x09 0x09 0x0a 0x0a 0x0b 0x0a 0x0c 0x0a +0x0d 0x09 0x0e 0x09 0x0f 0x09 0x10 0x05 0x11 0x05 0x12 0x05 0x13 0x05 0x14 0x05 +0x15 0x05 0x16 0x05 0x17 0x05 0x18 0x05 0x19 0x05 0x1a 0x05 0x1b 0x05>; + + marvell,caldata-txpwrlimit-5g-sub1 = /bits/ 8 < +0x01 0x00 0x06 0x00 0xaa 0x02 0x89 0x01 +0x3a 0x00 0x88 0x13 0x14 0x64 0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0a 0x05 0x0a +0x06 0x0a 0x07 0x09 0x08 0x09 0x09 0x09 0x0a 0x0a 0x0b 0x0a 0x0c 0x0a 0x0d 0x09 +0x0e 0x09 0x0f 0x09 0x10 0x05 0x11 0x05 0x12 0x05 0x13 0x05 0x14 0x05 0x15 0x05 +0x16 0x05 0x17 0x05 0x18 0x05 0x19 0x05 0x1a 0x05 0x1b 0x05 0x89 0x01 0x3a 0x00 +0x88 0x13 0x14 0x68 0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0a 0x05 0x0a 0x06 0x0a +0x07 0x09 0x08 0x09 0x09 0x09 0x0a 0x0a 0x0b 0x0a 0x0c 0x0a 0x0d 0x09 0x0e 0x09 +0x0f 0x09 0x10 0x05 0x11 0x05 0x12 0x05 0x13 0x05 0x14 0x05 0x15 0x05 0x16 0x05 +0x17 0x05 0x18 0x05 0x19 0x05 0x1a 0x05 0x1b 0x05 0x89 0x01 0x3a 0x00 0x88 0x13 +0x14 0x6c 0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0a 0x05 0x0a 0x06 0x0a 0x07 0x09 +0x08 0x09 0x09 0x09 0x0a 0x0a 0x0b 0x0a 0x0c 0x0a 0x0d 0x09 0x0e 0x09 0x0f 0x09 +0x10 0x05 0x11 0x05 0x12 0x05 0x13 0x05 0x14 0x05 0x15 0x05 0x16 0x05 0x17 0x05 +0x18 0x05 0x19 0x05 0x1a 0x05 0x1b 0x05 0x89 0x01 0x3a 0x00 0x88 0x13 0x14 0x70 +0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0a 0x05 0x0a 0x06 0x0a 0x07 0x09 0x08 0x09 +0x09 0x09 0x0a 0x0a 0x0b 0x0a 0x0c 0x0a 0x0d 0x09 0x0e 0x09 0x0f 0x09 0x10 0x05 +0x11 0x05 0x12 0x05 0x13 0x05 0x14 0x05 0x15 0x05 0x16 0x05 0x17 0x05 0x18 0x05 +0x19 0x05 0x1a 0x05 0x1b 0x05 0x89 0x01 0x3a 0x00 0x88 0x13 0x14 0x74 0x01 0x0c +0x02 0x0c 0x03 0x0c 0x04 0x0a 0x05 0x0a 0x06 0x0a 0x07 0x09 0x08 0x09 0x09 0x09 +0x0a 0x0a 0x0b 0x0a 0x0c 0x0a 0x0d 0x09 0x0e 0x09 0x0f 0x09 0x10 0x05 0x11 0x05 +0x12 0x05 0x13 0x05 0x14 0x05 0x15 0x05 0x16 0x05 0x17 0x05 0x18 0x05 0x19 0x05 +0x1a 0x05 0x1b 0x05 0x89 0x01 0x3a 0x00 0x88 0x13 0x14 0x78 0x01 0x0c 0x02 0x0c +0x03 0x0c 0x04 0x0a 0x05 0x0a 0x06 0x0a 0x07 0x09 0x08 0x09 0x09 0x09 0x0a 0x0a +0x0b 0x0a 0x0c 0x0a 0x0d 0x09 0x0e 0x09 0x0f 0x09 0x10 0x05 0x11 0x05 0x12 0x05 +0x13 0x05 0x14 0x05 0x15 0x05 0x16 0x05 0x17 0x05 0x18 0x05 0x19 0x05 0x1a 0x05 +0x1b 0x05 0x89 0x01 0x3a 0x00 0x88 0x13 0x14 0x7c 0x01 0x0c 0x02 0x0c 0x03 0x0c +0x04 0x0a 0x05 0x0a 0x06 0x0a 0x07 0x09 0x08 0x09 0x09 0x09 0x0a 0x0a 0x0b 0x0a +0x0c 0x0a 0x0d 0x09 0x0e 0x09 0x0f 0x09 0x10 0x05 0x11 0x05 0x12 0x05 0x13 0x05 +0x14 0x05 0x15 0x05 0x16 0x05 0x17 0x05 0x18 0x05 0x19 0x05 0x1a 0x05 0x1b 0x05 +0x89 0x01 0x3a 0x00 0x88 0x13 0x14 0x80 0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0a +0x05 0x0a 0x06 0x0a 0x07 0x09 0x08 0x09 0x09 0x09 0x0a 0x0a 0x0b 0x0a 0x0c 0x0a +0x0d 0x09 0x0e 0x09 0x0f 0x09 0x10 0x05 0x11 0x05 0x12 0x05 0x13 0x05 0x14 0x05 +0x15 0x05 0x16 0x05 0x17 0x05 0x18 0x05 0x19 0x05 0x1a 0x05 0x1b 0x05 0x89 0x01 +0x3a 0x00 0x88 0x13 0x14 0x84 0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0a 0x05 0x0a +0x06 0x0a 0x07 0x09 0x08 0x09 0x09 0x09 0x0a 0x0a 0x0b 0x0a 0x0c 0x0a 0x0d 0x09 +0x0e 0x09 0x0f 0x09 0x10 0x05 0x11 0x05 0x12 0x05 0x13 0x05 0x14 0x05 0x15 0x05 +0x16 0x05 0x17 0x05 0x18 0x05 0x19 0x05 0x1a 0x05 0x1b 0x05 0x89 0x01 0x3a 0x00 +0x88 0x13 0x14 0x88 0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0a 0x05 0x0a 0x06 0x0a +0x07 0x08 0x08 0x08 0x09 0x08 0x0a 0x0a 0x0b 0x0a 0x0c 0x0a 0x0d 0x08 0x0e 0x08 +0x0f 0x08 0x10 0x04 0x11 0x04 0x12 0x05 0x13 0x05 0x14 0x05 0x15 0x05 0x16 0x04 +0x17 0x04 0x18 0x05 0x19 0x05 0x1a 0x05 0x1b 0x05 0x89 0x01 0x3a 0x00 0x88 0x13 +0x14 0x8c 0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0a 0x05 0x0a 0x06 0x0a 0x07 0x08 +0x08 0x08 0x09 0x08 0x0a 0x0a 0x0b 0x0a 0x0c 0x0a 0x0d 0x08 0x0e 0x08 0x0f 0x08 +0x10 0x04 0x11 0x04 0x12 0x05 0x13 0x05 0x14 0x05 0x15 0x05 0x16 0x04 0x17 0x04 +0x18 0x05 0x19 0x05 0x1a 0x05 0x1b 0x05>; + + marvell,caldata-txpwrlimit-5g-sub2 = /bits/ 8 < +0x01 0x00 0x06 0x00 0x36 0x01 0x89 0x01 +0x3a 0x00 0x88 0x13 0x14 0x95 0x01 0x0b 0x02 0x0b 0x03 0x0b 0x04 0x0a 0x05 0x0a +0x06 0x0a 0x07 0x08 0x08 0x08 0x09 0x08 0x0a 0x0a 0x0b 0x0a 0x0c 0x0a 0x0d 0x08 +0x0e 0x08 0x0f 0x08 0x10 0x04 0x11 0x04 0x12 0x05 0x13 0x05 0x14 0x05 0x15 0x05 +0x16 0x04 0x17 0x04 0x18 0x05 0x19 0x05 0x1a 0x05 0x1b 0x05 0x89 0x01 0x3a 0x00 +0x88 0x13 0x14 0x99 0x01 0x0b 0x02 0x0b 0x03 0x0b 0x04 0x0a 0x05 0x0a 0x06 0x0a +0x07 0x08 0x08 0x08 0x09 0x08 0x0a 0x0a 0x0b 0x0a 0x0c 0x0a 0x0d 0x08 0x0e 0x08 +0x0f 0x08 0x10 0x04 0x11 0x04 0x12 0x05 0x13 0x05 0x14 0x05 0x15 0x05 0x16 0x04 +0x17 0x04 0x18 0x05 0x19 0x05 0x1a 0x05 0x1b 0x05 0x89 0x01 0x3a 0x00 0x88 0x13 +0x14 0x9d 0x01 0x0b 0x02 0x0b 0x03 0x0b 0x04 0x0a 0x05 0x0a 0x06 0x0a 0x07 0x08 +0x08 0x08 0x09 0x08 0x0a 0x0a 0x0b 0x0a 0x0c 0x0a 0x0d 0x08 0x0e 0x08 0x0f 0x08 +0x10 0x04 0x11 0x04 0x12 0x05 0x13 0x05 0x14 0x05 0x15 0x05 0x16 0x04 0x17 0x04 +0x18 0x05 0x19 0x05 0x1a 0x05 0x1b 0x05 0x89 0x01 0x3a 0x00 0x88 0x13 0x14 0xa1 +0x01 0x0b 0x02 0x0b 0x03 0x0b 0x04 0x0a 0x05 0x0a 0x06 0x0a 0x07 0x08 0x08 0x08 +0x09 0x08 0x0a 0x0a 0x0b 0x0a 0x0c 0x0a 0x0d 0x08 0x0e 0x08 0x0f 0x08 0x10 0x04 +0x11 0x04 0x12 0x05 0x13 0x05 0x14 0x05 0x15 0x05 0x16 0x04 0x17 0x04 0x18 0x05 +0x19 0x05 0x1a 0x05 0x1b 0x05 0x89 0x01 0x3a 0x00 0x88 0x13 0x14 0xa5 0x01 0x0b +0x02 0x0b 0x03 0x0b 0x04 0x0a 0x05 0x0a 0x06 0x0a 0x07 0x08 0x08 0x08 0x09 0x08 +0x0a 0x0a 0x0b 0x0a 0x0c 0x0a 0x0d 0x08 0x0e 0x08 0x0f 0x08 0x10 0x04 0x11 0x04 +0x12 0x05 0x13 0x05 0x14 0x05 0x15 0x05 0x16 0x04 0x17 0x04 0x18 0x05 0x19 0x05 +0x1a 0x05 0x1b 0x05>; + }; +}; + &sdmmc { disable-wp; pinctrl-names = "default"; @@ -311,11 +418,27 @@ }; &pinctrl { - backlight { - bl_pwr_en: bl_pwr_en { - rockchip,pins = <2 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; + pinctrl-names = "default", "sleep"; + pinctrl-0 = < + /* Common for sleep and wake, but no owners */ + &ddr0_retention + &ddrio_pwroff + &global_pwroff + + /* Wake only */ + &suspend_l_wake + &bt_dev_wake_awake + >; + pinctrl-1 = < + /* Common for sleep and wake, but no owners */ + &ddr0_retention + &ddrio_pwroff + &global_pwroff + + /* Sleep only */ + &suspend_l_sleep + &bt_dev_wake_sleep + >; buck-5v { drv_5v: drv-5v { @@ -329,16 +452,6 @@ }; }; - lcd { - lcd_enable_h: lcd-en { - rockchip,pins = <7 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - avdd_1v8_disp_en: avdd-1v8-disp-en { - rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - pmic { dvs_1: dvs-1 { rockchip,pins = <7 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>; diff --git a/arch/arm/boot/dts/rk3288-veyron-mickey.dts b/arch/arm/boot/dts/rk3288-veyron-mickey.dts index aa352d40c991..ffd1121d19be 100644 --- a/arch/arm/boot/dts/rk3288-veyron-mickey.dts +++ b/arch/arm/boot/dts/rk3288-veyron-mickey.dts @@ -7,6 +7,7 @@ /dts-v1/; #include "rk3288-veyron.dtsi" +#include "rk3288-veyron-broadcom-bluetooth.dtsi" / { model = "Google Mickey"; @@ -28,6 +29,13 @@ regulator-boot-on; vin-supply = <&vcc33_sys>; }; + + sound { + compatible = "rockchip,rockchip-audio-max98090"; + rockchip,model = "VEYRON-HDMI"; + rockchip,hdmi-codec = <&hdmi>; + rockchip,i2s-controller = <&i2s>; + }; }; &cpu_thermal { @@ -404,6 +412,14 @@ }; &pinctrl { + pinctrl-names = "default"; + pinctrl-0 = < + /* Common for sleep and wake, but no owners */ + &ddr0_retention + &ddrio_pwroff + &global_pwroff + >; + hdmi { power_hdmi_on: power-hdmi-on { rockchip,pins = <7 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; diff --git a/arch/arm/boot/dts/rk3288-veyron-minnie.dts b/arch/arm/boot/dts/rk3288-veyron-minnie.dts index 9008e703c07e..383fad1a88a1 100644 --- a/arch/arm/boot/dts/rk3288-veyron-minnie.dts +++ b/arch/arm/boot/dts/rk3288-veyron-minnie.dts @@ -7,6 +7,7 @@ /dts-v1/; #include "rk3288-veyron-chromebook.dtsi" +#include "rk3288-veyron-broadcom-bluetooth.dtsi" / { model = "Google Minnie"; @@ -15,40 +16,6 @@ "google,veyron-minnie-rev0", "google,veyron-minnie", "google,veyron", "rockchip,rk3288"; - backlight_regulator: backlight-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio2 RK_PB4 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&bl_pwr_en>; - regulator-name = "backlight_regulator"; - vin-supply = <&vcc33_sys>; - startup-delay-us = <15000>; - }; - - panel_regulator: panel-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio7 RK_PB6 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&lcd_enable_h>; - regulator-name = "panel_regulator"; - startup-delay-us = <100000>; - vin-supply = <&vcc33_sys>; - }; - - vcc18_lcd: vcc18-lcd { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&avdd_1v8_disp_en>; - regulator-name = "vcc18_lcd"; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vcc18_wl>; - }; - volume_buttons: volume-buttons { compatible = "gpio-keys"; pinctrl-names = "default"; @@ -72,40 +39,8 @@ &backlight { /* Minnie panel PWM must be >= 1%, so start non-zero brightness at 3 */ - brightness-levels = < - 0 3 4 5 6 7 - 8 9 10 11 12 13 14 15 - 16 17 18 19 20 21 22 23 - 24 25 26 27 28 29 30 31 - 32 33 34 35 36 37 38 39 - 40 41 42 43 44 45 46 47 - 48 49 50 51 52 53 54 55 - 56 57 58 59 60 61 62 63 - 64 65 66 67 68 69 70 71 - 72 73 74 75 76 77 78 79 - 80 81 82 83 84 85 86 87 - 88 89 90 91 92 93 94 95 - 96 97 98 99 100 101 102 103 - 104 105 106 107 108 109 110 111 - 112 113 114 115 116 117 118 119 - 120 121 122 123 124 125 126 127 - 128 129 130 131 132 133 134 135 - 136 137 138 139 140 141 142 143 - 144 145 146 147 148 149 150 151 - 152 153 154 155 156 157 158 159 - 160 161 162 163 164 165 166 167 - 168 169 170 171 172 173 174 175 - 176 177 178 179 180 181 182 183 - 184 185 186 187 188 189 190 191 - 192 193 194 195 196 197 198 199 - 200 201 202 203 204 205 206 207 - 208 209 210 211 212 213 214 215 - 216 217 218 219 220 221 222 223 - 224 225 226 227 228 229 230 231 - 232 233 234 235 236 237 238 239 - 240 241 242 243 244 245 246 247 - 248 249 250 251 252 253 254 255>; - power-supply = <&backlight_regulator>; + brightness-levels = <0 3 255>; + num-interpolated-steps = <252>; }; &i2c_tunnel { @@ -136,8 +71,21 @@ }; &panel { - compatible = "auo,b101ean01", "simple-panel"; - power-supply= <&panel_regulator>; + compatible = "auo,b101ean01"; + + /delete-node/ panel-timing; + + panel-timing { + clock-frequency = <66666667>; + hactive = <1280>; + hfront-porch = <18>; + hback-porch = <21>; + hsync-len = <32>; + vactive = <800>; + vfront-porch = <4>; + vback-porch = <8>; + vsync-len = <18>; + }; }; &rk808 { @@ -397,11 +345,25 @@ }; &pinctrl { - backlight { - bl_pwr_en: bl_pwr_en { - rockchip,pins = <2 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; + pinctrl-names = "default", "sleep"; + pinctrl-0 = < + /* Common for sleep and wake, but no owners */ + &ddr0_retention + &ddrio_pwroff + &global_pwroff + + /* Wake only */ + &suspend_l_wake + >; + pinctrl-1 = < + /* Common for sleep and wake, but no owners */ + &ddr0_retention + &ddrio_pwroff + &global_pwroff + + /* Sleep only */ + &suspend_l_sleep + >; buck-5v { drv_5v: drv-5v { @@ -425,16 +387,6 @@ }; }; - lcd { - lcd_enable_h: lcd-en { - rockchip,pins = <7 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - avdd_1v8_disp_en: avdd-1v8-disp-en { - rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - pmic { dvs_1: dvs-1 { rockchip,pins = <7 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>; diff --git a/arch/arm/boot/dts/rk3288-veyron-pinky.dts b/arch/arm/boot/dts/rk3288-veyron-pinky.dts index 9b6f4d9b03b6..71e6629cc208 100644 --- a/arch/arm/boot/dts/rk3288-veyron-pinky.dts +++ b/arch/arm/boot/dts/rk3288-veyron-pinky.dts @@ -14,7 +14,14 @@ compatible = "google,veyron-pinky-rev2", "google,veyron-pinky", "google,veyron", "rockchip,rk3288"; + /delete-node/backlight-regulator; + /delete-node/panel-regulator; /delete-node/emmc-pwrseq; + /delete-node/vcc18-lcd; +}; + +&backlight { + /delete-property/power-supply; }; &emmc { @@ -52,7 +59,39 @@ i2c-scl-rising-time-ns = <300>; }; +&panel { + power-supply = <&vcc33_lcd>; +}; + &pinctrl { + pinctrl-names = "default", "sleep"; + pinctrl-0 = < + /* Common for sleep and wake, but no owners */ + &ddr0_retention + &ddrio_pwroff + &global_pwroff + + /* Wake only */ + &suspend_l_wake + &bt_dev_wake_awake + >; + pinctrl-1 = < + /* Common for sleep and wake, but no owners */ + &ddr0_retention + &ddrio_pwroff + &global_pwroff + + /* Sleep only */ + &suspend_l_sleep + &bt_dev_wake_sleep + >; + + /delete-node/ lcd; + + backlight { + /delete-node/ bl_pwr_en; + }; + buttons { pwr_key_h: pwr-key-h { rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; diff --git a/arch/arm/boot/dts/rk3288-veyron-speedy.dts b/arch/arm/boot/dts/rk3288-veyron-speedy.dts index 9b140db04456..e354c61a45e7 100644 --- a/arch/arm/boot/dts/rk3288-veyron-speedy.dts +++ b/arch/arm/boot/dts/rk3288-veyron-speedy.dts @@ -7,6 +7,7 @@ /dts-v1/; #include "rk3288-veyron-chromebook.dtsi" +#include "rk3288-veyron-broadcom-bluetooth.dtsi" #include "cros-ec-sbs.dtsi" / { @@ -16,44 +17,6 @@ "google,veyron-speedy-rev5", "google,veyron-speedy-rev4", "google,veyron-speedy-rev3", "google,veyron-speedy-rev2", "google,veyron-speedy", "google,veyron", "rockchip,rk3288"; - - panel_regulator: panel-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio7 RK_PB6 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&lcd_enable_h>; - regulator-name = "panel_regulator"; - startup-delay-us = <100000>; - vin-supply = <&vcc33_sys>; - }; - - vcc18_lcd: vcc18-lcd { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&avdd_1v8_disp_en>; - regulator-name = "vcc18_lcd"; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vcc18_wl>; - }; - - backlight_regulator: backlight-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio2 RK_PB4 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&bl_pwr_en>; - regulator-name = "backlight_regulator"; - vin-supply = <&vcc33_sys>; - startup-delay-us = <15000>; - }; -}; - -&backlight { - power-supply = <&backlight_regulator>; }; &cpu_alert0 { @@ -83,10 +46,6 @@ temperature = <90000>; }; -&panel { - power-supply= <&panel_regulator>; -}; - &rk808 { pinctrl-names = "default"; pinctrl-0 = <&pmic_int_l>; @@ -321,11 +280,25 @@ }; &pinctrl { - backlight { - bl_pwr_en: bl_pwr_en { - rockchip,pins = <2 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; + pinctrl-names = "default", "sleep"; + pinctrl-0 = < + /* Common for sleep and wake, but no owners */ + &ddr0_retention + &ddrio_pwroff + &global_pwroff + + /* Wake only */ + &suspend_l_wake + >; + pinctrl-1 = < + /* Common for sleep and wake, but no owners */ + &ddr0_retention + &ddrio_pwroff + &global_pwroff + + /* Sleep only */ + &suspend_l_sleep + >; buck-5v { drv_5v: drv-5v { @@ -339,16 +312,6 @@ }; }; - lcd { - lcd_enable_h: lcd-en { - rockchip,pins = <7 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - avdd_1v8_disp_en: avdd-1v8-disp-en { - rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - pmic { dvs_1: dvs-1 { rockchip,pins = <7 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>; diff --git a/arch/arm/boot/dts/rk3288-veyron-tiger.dts b/arch/arm/boot/dts/rk3288-veyron-tiger.dts new file mode 100644 index 000000000000..069f0c2c1fdf --- /dev/null +++ b/arch/arm/boot/dts/rk3288-veyron-tiger.dts @@ -0,0 +1,87 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Veyron Tiger Rev 0+ board device tree source + * + * Copyright 2016 Google, Inc + */ + +/dts-v1/; +#include "rk3288-veyron-fievel.dts" +#include "rk3288-veyron-edp.dtsi" + +/ { + model = "Google Tiger"; + compatible = "google,veyron-tiger-rev8", "google,veyron-tiger-rev7", + "google,veyron-tiger-rev6", "google,veyron-tiger-rev5", + "google,veyron-tiger-rev4", "google,veyron-tiger-rev3", + "google,veyron-tiger-rev2", "google,veyron-tiger-rev1", + "google,veyron-tiger-rev0", "google,veyron-tiger", + "google,veyron", "rockchip,rk3288"; + + /delete-node/ vcc18-lcd; +}; + +&backlight { + /* Tiger panel PWM must be >= 1%, so start non-zero brightness at 3 */ + brightness-levels = <0 3 255>; + num-interpolated-steps = <252>; +}; + +&backlight_regulator { + vin-supply = <&vccsys>; +}; + +&i2c3 { + status = "okay"; + + clock-frequency = <400000>; + i2c-scl-falling-time-ns = <50>; + i2c-scl-rising-time-ns = <300>; + + touchscreen@10 { + compatible = "elan,ekth3500"; + reg = <0x10>; + interrupt-parent = <&gpio2>; + interrupts = <RK_PB6 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&touch_int &touch_rst>; + reset-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_LOW>; + vcc33-supply = <&vcc33_io>; + vccio-supply = <&vcc33_io>; + wakeup-source; + }; +}; + +&panel { + compatible = "auo,b101ean01"; + + /delete-node/ panel-timing; + + panel-timing { + clock-frequency = <66666667>; + hactive = <1280>; + hfront-porch = <18>; + hback-porch = <21>; + hsync-len = <32>; + vactive = <800>; + vfront-porch = <4>; + vback-porch = <8>; + vsync-len = <18>; + }; +}; + +&pinctrl { + lcd { + /delete-node/ avdd-1v8-disp-en; + }; + + touchscreen { + touch_int: touch-int { + rockchip,pins = <2 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + touch_rst: touch-rst { + rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi index 8fc8eac699bf..54a6838d73f5 100644 --- a/arch/arm/boot/dts/rk3288-veyron.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron.dtsi @@ -23,30 +23,6 @@ reg = <0x0 0x0 0x0 0x80000000>; }; - bt_activity: bt-activity { - compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&bt_host_wake>; - - /* - * HACK: until we have an LPM driver, we'll use an - * ugly GPIO key to allow Bluetooth to wake from S3. - * This is expected to only be used by BT modules that - * use UART for comms. For BT modules that talk over - * SDIO we should use a wakeup mechanism related to SDIO. - * - * Use KEY_RESERVED here since that will work as a wakeup but - * doesn't get reported to higher levels (so doesn't confuse - * Chrome). - */ - bt-wake { - label = "BT Wakeup"; - gpios = <&gpio4 RK_PD7 GPIO_ACTIVE_HIGH>; - linux,code = <KEY_RESERVED>; - wakeup-source; - }; - - }; power_button: power-button { compatible = "gpio-keys"; @@ -82,22 +58,17 @@ clocks = <&rk808 RK808_CLKOUT1>; clock-names = "ext_clock"; pinctrl-names = "default"; - pinctrl-0 = <&bt_enable_l>, <&wifi_enable_h>; + pinctrl-0 = <&wifi_enable_h>; /* - * Depending on the actual card populated GPIO4 D4 and D5 + * Depending on the actual card populated GPIO4 D4 * correspond to one of these signals on the module: * * D4: * - SDIO_RESET_L_WL_REG_ON * - PDN (power down when low) - * - * D5: - * - BT_I2S_WS_BT_RFDISABLE_L - * - No connect */ - reset-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_LOW>, - <&gpio4 RK_PD5 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_LOW>; }; vcc_5v: vcc-5v { @@ -481,26 +452,6 @@ }; &pinctrl { - pinctrl-names = "default", "sleep"; - pinctrl-0 = < - /* Common for sleep and wake, but no owners */ - &ddr0_retention - &ddrio_pwroff - &global_pwroff - - /* Wake only */ - &bt_dev_wake_awake - >; - pinctrl-1 = < - /* Common for sleep and wake, but no owners */ - &ddr0_retention - &ddrio_pwroff - &global_pwroff - - /* Sleep only */ - &bt_dev_wake_sleep - >; - pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma { bias-disable; drive-strength = <8>; @@ -586,6 +537,10 @@ rockchip,pins = <4 RK_PD7 RK_FUNC_GPIO &pcfg_pull_down>; }; + bt_host_wake_l: bt-host-wake-l { + rockchip,pins = <4 RK_PD7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + /* * We run sdio0 at max speed; bump up drive strength. * We also have external pulls, so disable the internal ones. @@ -618,6 +573,10 @@ bt_dev_wake_awake: bt-dev-wake-awake { rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_output_high>; }; + + bt_dev_wake: bt-dev-wake { + rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; + }; }; tpm { diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index cc893e154fe5..9beb662166aa 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -247,7 +247,7 @@ ports = <&vopl_out>, <&vopb_out>; }; - sdmmc: dwmmc@ff0c0000 { + sdmmc: mmc@ff0c0000 { compatible = "rockchip,rk3288-dw-mshc"; max-frequency = <150000000>; clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>, @@ -261,7 +261,7 @@ status = "disabled"; }; - sdio0: dwmmc@ff0d0000 { + sdio0: mmc@ff0d0000 { compatible = "rockchip,rk3288-dw-mshc"; max-frequency = <150000000>; clocks = <&cru HCLK_SDIO0>, <&cru SCLK_SDIO0>, @@ -275,7 +275,7 @@ status = "disabled"; }; - sdio1: dwmmc@ff0e0000 { + sdio1: mmc@ff0e0000 { compatible = "rockchip,rk3288-dw-mshc"; max-frequency = <150000000>; clocks = <&cru HCLK_SDIO1>, <&cru SCLK_SDIO1>, @@ -289,7 +289,7 @@ status = "disabled"; }; - emmc: dwmmc@ff0f0000 { + emmc: mmc@ff0f0000 { compatible = "rockchip,rk3288-dw-mshc"; max-frequency = <150000000>; clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>, @@ -1023,7 +1023,7 @@ vopb: vop@ff930000 { compatible = "rockchip,rk3288-vop"; - reg = <0x0 0xff930000 0x0 0x19c>; + reg = <0x0 0xff930000 0x0 0x19c>, <0x0 0xff931000 0x0 0x1000>; interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru ACLK_VOP0>, <&cru DCLK_VOP0>, <&cru HCLK_VOP0>; clock-names = "aclk_vop", "dclk_vop", "hclk_vop"; @@ -1073,7 +1073,7 @@ vopl: vop@ff940000 { compatible = "rockchip,rk3288-vop"; - reg = <0x0 0xff940000 0x0 0x19c>; + reg = <0x0 0xff940000 0x0 0x19c>, <0x0 0xff941000 0x0 0x1000>; interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru ACLK_VOP1>, <&cru DCLK_VOP1>, <&cru HCLK_VOP1>; clock-names = "aclk_vop", "dclk_vop", "hclk_vop"; @@ -1391,6 +1391,9 @@ clocks = <&cru PCLK_EFUSE256>; clock-names = "pclk_efuse"; + cpu_id: cpu-id@7 { + reg = <0x07 0x10>; + }; cpu_leakage: cpu_leakage@17 { reg = <0x17 0x1>; }; diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi index 97307a405e60..241f43e29c77 100644 --- a/arch/arm/boot/dts/rk3xxx.dtsi +++ b/arch/arm/boot/dts/rk3xxx.dtsi @@ -231,7 +231,7 @@ status = "disabled"; }; - mmc0: dwmmc@10214000 { + mmc0: mmc@10214000 { compatible = "rockchip,rk2928-dw-mshc"; reg = <0x10214000 0x1000>; interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; @@ -245,7 +245,7 @@ status = "disabled"; }; - mmc1: dwmmc@10218000 { + mmc1: mmc@10218000 { compatible = "rockchip,rk2928-dw-mshc"; reg = <0x10218000 0x1000>; interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; @@ -259,7 +259,7 @@ status = "disabled"; }; - emmc: dwmmc@1021c000 { + emmc: mmc@1021c000 { compatible = "rockchip,rk2928-dw-mshc"; reg = <0x1021c000 0x1000>; interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/rockchip-radxa-dalang-carrier.dtsi b/arch/arm/boot/dts/rockchip-radxa-dalang-carrier.dtsi new file mode 100644 index 000000000000..df3712aedf8a --- /dev/null +++ b/arch/arm/boot/dts/rockchip-radxa-dalang-carrier.dtsi @@ -0,0 +1,81 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd + * Copyright (c) 2019 Radxa Limited + * Copyright (c) 2019 Amarula Solutions(India) + */ + +#include <dt-bindings/pwm/pwm.h> + +/ { + chosen { + stdout-path = "serial2:1500000n8"; + }; +}; + +&gmac { + status = "okay"; +}; + +&i2c1 { + status = "okay"; + i2c-scl-rising-time-ns = <140>; + i2c-scl-falling-time-ns = <30>; +}; + +&i2c2 { + status = "okay"; + clock-frequency = <400000>; + + hym8563: hym8563@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "hym8563"; + pinctrl-names = "default"; + pinctrl-0 = <&hym8563_int>; + interrupt-parent = <&gpio4>; + interrupts = <30 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&pwm0 { + status = "okay"; +}; + +&pwm2 { + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>; + disable-wp; + vqmmc-supply = <&vccio_sd>; + max-frequency = <150000000>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer &uart0_cts>; + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&pinctrl { + hym8563 { + hym8563_int: hym8563-int { + rockchip,pins = + <4 RK_PD6 0 &pcfg_pull_up>; + }; + }; +}; diff --git a/arch/arm/boot/dts/rv1108.dtsi b/arch/arm/boot/dts/rv1108.dtsi index 5876690ee09e..1fd06e7cb983 100644 --- a/arch/arm/boot/dts/rv1108.dtsi +++ b/arch/arm/boot/dts/rv1108.dtsi @@ -456,7 +456,7 @@ #reset-cells = <1>; }; - emmc: dwmmc@30110000 { + emmc: mmc@30110000 { compatible = "rockchip,rv1108-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x30110000 0x4000>; interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; @@ -468,7 +468,7 @@ status = "disabled"; }; - sdio: dwmmc@30120000 { + sdio: mmc@30120000 { compatible = "rockchip,rv1108-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x30120000 0x4000>; interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; @@ -480,7 +480,7 @@ status = "disabled"; }; - sdmmc: dwmmc@30130000 { + sdmmc: mmc@30130000 { compatible = "rockchip,rv1108-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x30130000 0x4000>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/s3c2416-smdk2416.dts b/arch/arm/boot/dts/s3c2416-smdk2416.dts index cb371bf72f64..811bfdef4e9b 100644 --- a/arch/arm/boot/dts/s3c2416-smdk2416.dts +++ b/arch/arm/boot/dts/s3c2416-smdk2416.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * SAMSUNG SMDK2416 board device tree source + * Samsung SMDK2416 board device tree source * * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de> */ diff --git a/arch/arm/boot/dts/s3c6410-mini6410.dts b/arch/arm/boot/dts/s3c6410-mini6410.dts index 0e159c884f97..1aeac33b0d34 100644 --- a/arch/arm/boot/dts/s3c6410-mini6410.dts +++ b/arch/arm/boot/dts/s3c6410-mini6410.dts @@ -165,6 +165,10 @@ }; }; +&clocks { + clocks = <&fin_pll>; +}; + &sdhci0 { pinctrl-names = "default"; pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>; diff --git a/arch/arm/boot/dts/s3c6410-smdk6410.dts b/arch/arm/boot/dts/s3c6410-smdk6410.dts index a9a5689dc462..96267f5f02a8 100644 --- a/arch/arm/boot/dts/s3c6410-smdk6410.dts +++ b/arch/arm/boot/dts/s3c6410-smdk6410.dts @@ -4,7 +4,7 @@ * * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com> * - * Device tree source file for SAMSUNG SMDK6410 board which is based on + * Device tree source file for Samsung SMDK6410 board which is based on * Samsung's S3C6410 SoC. */ @@ -16,7 +16,7 @@ #include "s3c6410.dtsi" / { - model = "SAMSUNG SMDK6410 board based on S3C6410"; + model = "Samsung SMDK6410 board based on S3C6410"; compatible = "samsung,mini6410", "samsung,s3c6410"; memory@50000000 { @@ -69,6 +69,10 @@ }; }; +&clocks { + clocks = <&fin_pll>; +}; + &sdhci0 { pinctrl-names = "default"; pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>; diff --git a/arch/arm/boot/dts/sam9x60.dtsi b/arch/arm/boot/dts/sam9x60.dtsi new file mode 100644 index 000000000000..326b39328b58 --- /dev/null +++ b/arch/arm/boot/dts/sam9x60.dtsi @@ -0,0 +1,691 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * sam9x60.dtsi - Device Tree Include file for Microchip SAM9X60 SoC + * + * Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries + * + * Author: Sandeep Sheriker M <sandeepsheriker.mallikarjun@microchip.com> + */ + +#include <dt-bindings/dma/at91.h> +#include <dt-bindings/pinctrl/at91.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/clock/at91.h> +#include <dt-bindings/mfd/atmel-flexcom.h> + +/ { + #address-cells = <1>; + #size-cells = <1>; + model = "Microchip SAM9X60 SoC"; + compatible = "microchip,sam9x60"; + interrupt-parent = <&aic>; + + aliases { + serial0 = &dbgu; + gpio0 = &pioA; + gpio1 = &pioB; + gpio2 = &pioC; + gpio3 = &pioD; + tcb0 = &tcb0; + tcb1 = &tcb1; + }; + + cpus { + #address-cells = <0>; + #size-cells = <0>; + + cpu { + compatible = "arm,arm926ej-s"; + device_type = "cpu"; + }; + }; + + memory { + device_type = "memory"; + reg = <0x20000000 0x10000000>; + }; + + clocks { + slow_xtal: slow_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + + main_xtal: main_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + }; + + sram: sram@300000 { + compatible = "mmio-sram"; + reg = <0x00300000 0x100000>; + }; + + ahb { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + usb1: ohci@600000 { + compatible = "atmel,at91rm9200-ohci", "usb-ohci"; + reg = <0x00600000 0x100000>; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_SYSTEM 6>; + clock-names = "ohci_clk", "hclk", "uhpck"; + status = "disabled"; + }; + + usb2: ehci@700000 { + compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; + reg = <0x00700000 0x100000>; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; + clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 22>; + clock-names = "usb_clk", "ehci_clk"; + assigned-clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>; + assigned-clock-rates = <480000000>; + status = "disabled"; + }; + + ebi: ebi@10000000 { + compatible = "microchip,sam9x60-ebi"; + #address-cells = <2>; + #size-cells = <1>; + atmel,smc = <&smc>; + microchip,sfr = <&sfr>; + reg = <0x10000000 0x60000000>; + ranges = <0x0 0x0 0x10000000 0x10000000 + 0x1 0x0 0x20000000 0x10000000 + 0x2 0x0 0x30000000 0x10000000 + 0x3 0x0 0x40000000 0x10000000 + 0x4 0x0 0x50000000 0x10000000 + 0x5 0x0 0x60000000 0x10000000>; + clocks = <&pmc PMC_TYPE_CORE PMC_MCK>; + status = "disabled"; + + nand_controller: nand-controller { + compatible = "microchip,sam9x60-nand-controller"; + ecc-engine = <&pmecc>; + #address-cells = <2>; + #size-cells = <1>; + ranges; + status = "disabled"; + }; + }; + + sdmmc0: sdio-host@80000000 { + compatible = "microchip,sam9x60-sdhci"; + reg = <0x80000000 0x300>; + interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 12>, <&pmc PMC_TYPE_GCK 12>; + clock-names = "hclock", "multclk"; + assigned-clocks = <&pmc PMC_TYPE_GCK 12>; + assigned-clock-rates = <100000000>; + status = "disabled"; + }; + + sdmmc1: sdio-host@90000000 { + compatible = "microchip,sam9x60-sdhci"; + reg = <0x90000000 0x300>; + interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 26>, <&pmc PMC_TYPE_GCK 26>; + clock-names = "hclock", "multclk"; + assigned-clocks = <&pmc PMC_TYPE_GCK 26>; + assigned-clock-rates = <100000000>; + status = "disabled"; + }; + + apb { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + flx4: flexcom@f0000000 { + compatible = "atmel,sama5d2-flexcom"; + reg = <0xf0000000 0x200>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 13>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xf0000000 0x800>; + status = "disabled"; + }; + + flx5: flexcom@f0004000 { + compatible = "atmel,sama5d2-flexcom"; + reg = <0xf0004000 0x200>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 14>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xf0004000 0x800>; + status = "disabled"; + }; + + dma0: dma-controller@f0008000 { + compatible = "microchip,sam9x60-dma", "atmel,sama5d4-dma"; + reg = <0xf0008000 0x1000>; + interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>; + #dma-cells = <1>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 20>; + clock-names = "dma_clk"; + }; + + ssc: ssc@f0010000 { + compatible = "atmel,at91sam9g45-ssc"; + reg = <0xf0010000 0x4000>; + interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(38))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(39))>; + dma-names = "tx", "rx"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 28>; + clock-names = "pclk"; + status = "disabled"; + }; + + qspi: spi@f0014000 { + compatible = "microchip,sam9x60-qspi"; + reg = <0xf0014000 0x100>, <0x70000000 0x10000000>; + reg-names = "qspi_base", "qspi_mmap"; + interrupts = <35 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(26))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(27))>; + dma-names = "tx", "rx"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 35>, <&pmc PMC_TYPE_SYSTEM 19>; + clock-names = "pclk", "qspick"; + atmel,pmc = <&pmc>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2s: i2s@f001c000 { + compatible = "microchip,sam9x60-i2smcc"; + reg = <0xf001c000 0x100>; + interrupts = <34 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(36))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(37))>; + dma-names = "tx", "rx"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 34>, <&pmc PMC_TYPE_GCK 34>; + clock-names = "pclk", "gclk"; + status = "disabled"; + }; + + flx11: flexcom@f0020000 { + compatible = "atmel,sama5d2-flexcom"; + reg = <0xf0020000 0x200>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 32>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xf0020000 0x800>; + status = "disabled"; + }; + + flx12: flexcom@f0024000 { + compatible = "atmel,sama5d2-flexcom"; + reg = <0xf0024000 0x200>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 33>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xf0024000 0x800>; + status = "disabled"; + }; + + pit64b: timer@f0028000 { + compatible = "microchip,sam9x60-pit64b"; + reg = <0xf0028000 0x100>; + interrupts = <37 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 37>, <&pmc PMC_TYPE_GCK 37>; + clock-names = "pclk", "gclk"; + }; + + sha: sha@f002c000 { + compatible = "atmel,at91sam9g46-sha"; + reg = <0xf002c000 0x100>; + interrupts = <41 IRQ_TYPE_LEVEL_HIGH 0>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(34))>; + dma-names = "tx"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 41>; + clock-names = "sha_clk"; + status = "okay"; + }; + + trng: trng@f0030000 { + compatible = "microchip,sam9x60-trng"; + reg = <0xf0030000 0x100>; + interrupts = <38 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 38>; + status = "okay"; + }; + + aes: aes@f0034000 { + compatible = "atmel,at91sam9g46-aes"; + reg = <0xf0034000 0x100>; + interrupts = <39 IRQ_TYPE_LEVEL_HIGH 0>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(32))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(33))>; + dma-names = "tx", "rx"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 39>; + clock-names = "aes_clk"; + status = "okay"; + }; + + tdes: tdes@f0038000 { + compatible = "atmel,at91sam9g46-tdes"; + reg = <0xf0038000 0x100>; + interrupts = <40 IRQ_TYPE_LEVEL_HIGH 0>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(31))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(30))>; + dma-names = "tx", "rx"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 40>; + clock-names = "tdes_clk"; + status = "okay"; + }; + + classd: classd@f003c000 { + compatible = "atmel,sama5d2-classd"; + reg = <0xf003c000 0x100>; + interrupts = <42 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(35))>; + dma-names = "tx"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 42>, <&pmc PMC_TYPE_GCK 42>; + clock-names = "pclk", "gclk"; + status = "disabled"; + }; + + can0: can@f8000000 { + compatible = "microchip,sam9x60-can", "atmel,at91sam9x5-can"; + reg = <0xf8000000 0x300>; + interrupts = <29 IRQ_TYPE_LEVEL_HIGH 3>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 29>; + clock-names = "can_clk"; + status = "disabled"; + }; + + can1: can@f8004000 { + compatible = "microchip,sam9x60-can", "atmel,at91sam9x5-can"; + reg = <0xf8004000 0x300>; + interrupts = <30 IRQ_TYPE_LEVEL_HIGH 3>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 30>; + clock-names = "can_clk"; + status = "disabled"; + }; + + tcb0: timer@f8008000 { + compatible = "microchip,sam9x60-tcb", "atmel,at91sam9x5-tcb", "simple-mfd", "syscon"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xf8008000 0x100>; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&clk32k 0>; + clock-names = "t0_clk", "slow_clk"; + }; + + tcb1: timer@f800c000 { + compatible = "microchip,sam9x60-tcb", "atmel,at91sam9x5-tcb", "simple-mfd", "syscon"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xf800c000 0x100>; + interrupts = <45 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 45>, <&clk32k 0>; + clock-names = "t0_clk", "slow_clk"; + }; + + flx6: flexcom@f8010000 { + compatible = "atmel,sama5d2-flexcom"; + reg = <0xf8010000 0x200>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 9>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xf8010000 0x800>; + status = "disabled"; + }; + + flx7: flexcom@f8014000 { + compatible = "atmel,sama5d2-flexcom"; + reg = <0xf8014000 0x200>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 10>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xf8014000 0x800>; + status = "disabled"; + }; + + flx8: flexcom@f8018000 { + compatible = "atmel,sama5d2-flexcom"; + reg = <0xf8018000 0x200>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 11>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xf8018000 0x800>; + status = "disabled"; + }; + + flx0: flexcom@f801c000 { + compatible = "atmel,sama5d2-flexcom"; + reg = <0xf801c000 0x200>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 5>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xf801c000 0x800>; + status = "disabled"; + }; + + flx1: flexcom@f8020000 { + compatible = "atmel,sama5d2-flexcom"; + reg = <0xf8020000 0x200>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 6>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xf8020000 0x800>; + status = "disabled"; + }; + + flx2: flexcom@f8024000 { + compatible = "atmel,sama5d2-flexcom"; + reg = <0xf8024000 0x200>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 7>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xf8024000 0x800>; + status = "disabled"; + }; + + flx3: flexcom@f8028000 { + compatible = "atmel,sama5d2-flexcom"; + reg = <0xf8028000 0x200>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 8>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xf8028000 0x800>; + status = "disabled"; + }; + + macb0: ethernet@f802c000 { + compatible = "cdns,sam9x60-macb", "cdns,macb"; + reg = <0xf802c000 0x1000>; + interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 24>, <&pmc PMC_TYPE_PERIPHERAL 24>; + clock-names = "hclk", "pclk"; + status = "disabled"; + }; + + macb1: ethernet@f8030000 { + compatible = "cdns,sam9x60-macb", "cdns,macb"; + reg = <0xf8030000 0x1000>; + interrupts = <27 IRQ_TYPE_LEVEL_HIGH 3>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 27>, <&pmc PMC_TYPE_PERIPHERAL 27>; + clock-names = "hclk", "pclk"; + status = "disabled"; + }; + + pwm0: pwm@f8034000 { + compatible = "microchip,sam9x60-pwm"; + reg = <0xf8034000 0x300>; + interrupts = <18 IRQ_TYPE_LEVEL_HIGH 4>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 18>; + #pwm-cells = <3>; + status="disabled"; + }; + + hlcdc: hlcdc@f8038000 { + compatible = "microchip,sam9x60-hlcdc"; + reg = <0xf8038000 0x4000>; + interrupts = <25 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 25>, <&pmc PMC_TYPE_GCK 25>, <&clk32k 1>; + clock-names = "periph_clk","sys_clk", "slow_clk"; + assigned-clocks = <&pmc PMC_TYPE_GCK 25>; + assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_MCK>; + status = "disabled"; + + hlcdc-display-controller { + compatible = "atmel,hlcdc-display-controller"; + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + }; + + hlcdc_pwm: hlcdc-pwm { + compatible = "atmel,hlcdc-pwm"; + #pwm-cells = <3>; + }; + }; + + flx9: flexcom@f8040000 { + compatible = "atmel,sama5d2-flexcom"; + reg = <0xf8040000 0x200>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 15>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xf8040000 0x800>; + status = "disabled"; + }; + + flx10: flexcom@f8044000 { + compatible = "atmel,sama5d2-flexcom"; + reg = <0xf8044000 0x200>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 16>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xf8044000 0x800>; + status = "disabled"; + }; + + isi: isi@f8048000 { + compatible = "microchip,sam9x60-isi", "atmel,at91sam9g45-isi"; + reg = <0xf8048000 0x100>; + interrupts = <43 IRQ_TYPE_LEVEL_HIGH 5>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 43>; + clock-names = "isi_clk"; + status = "disabled"; + port { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + adc: adc@f804c000 { + compatible = "microchip,sam9x60-adc", "atmel,sama5d2-adc"; + reg = <0xf804c000 0x100>; + interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 19>; + clock-names = "adc_clk"; + dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(40))>; + dma-names = "rx"; + atmel,min-sample-rate-hz = <200000>; + atmel,max-sample-rate-hz = <20000000>; + atmel,startup-time-ms = <4>; + atmel,trigger-edge-type = <IRQ_TYPE_EDGE_RISING>; + #io-channel-cells = <1>; + status = "disabled"; + }; + + sfr: sfr@f8050000 { + compatible = "microchip,sam9x60-sfr", "syscon"; + reg = <0xf8050000 0x100>; + }; + + matrix: matrix@ffffde00 { + compatible = "microchip,sam9x60-matrix", "atmel,at91sam9x5-matrix", "syscon"; + reg = <0xffffde00 0x200>; + }; + + pmecc: ecc-engine@ffffe000 { + compatible = "microchip,sam9x60-pmecc", "atmel,at91sam9g45-pmecc"; + reg = <0xffffe000 0x300>, + <0xffffe600 0x100>; + }; + + mpddrc: mpddrc@ffffe800 { + compatible = "microchip,sam9x60-ddramc", "atmel,sama5d3-ddramc"; + reg = <0xffffe800 0x200>; + clocks = <&pmc PMC_TYPE_SYSTEM 2>, <&pmc PMC_TYPE_CORE PMC_MCK>; + clock-names = "ddrck", "mpddr"; + }; + + smc: smc@ffffea00 { + compatible = "microchip,sam9x60-smc", "atmel,at91sam9260-smc", "syscon"; + reg = <0xffffea00 0x100>; + }; + + aic: interrupt-controller@fffff100 { + compatible = "microchip,sam9x60-aic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0xfffff100 0x100>; + atmel,external-irqs = <31>; + }; + + dbgu: serial@fffff200 { + compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; + reg = <0xfffff200 0x200>; + interrupts = <47 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(28))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(29))>; + dma-names = "tx", "rx"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 47>; + clock-names = "usart"; + status = "disabled"; + }; + + pinctrl: pinctrl@fffff400 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "microchip,sam9x60-pinctrl", "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus"; + ranges = <0xfffff400 0xfffff400 0x800>; + + pioA: gpio@fffff400 { + compatible = "microchip,sam9x60-gpio", "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffff400 0x200>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 2>; + }; + + pioB: gpio@fffff600 { + compatible = "microchip,sam9x60-gpio", "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffff600 0x200>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + #gpio-lines = <26>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 3>; + }; + + pioC: gpio@fffff800 { + compatible = "microchip,sam9x60-gpio", "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffff800 0x200>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 4>; + }; + + pioD: gpio@fffffa00 { + compatible = "microchip,sam9x60-gpio", "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffffa00 0x200>; + interrupts = <44 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + #gpio-lines = <22>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 44>; + }; + }; + + pmc: pmc@fffffc00 { + compatible = "microchip,sam9x60-pmc", "syscon"; + reg = <0xfffffc00 0x200>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + #clock-cells = <2>; + clocks = <&clk32k 1>, <&clk32k 0>, <&main_xtal>; + clock-names = "td_slck", "md_slck", "main_xtal"; + }; + + reset_controller: rstc@fffffe00 { + compatible = "microchip,sam9x60-rstc"; + reg = <0xfffffe00 0x10>; + clocks = <&clk32k 0>; + }; + + shutdown_controller: shdwc@fffffe10 { + compatible = "microchip,sam9x60-shdwc"; + reg = <0xfffffe10 0x10>; + clocks = <&clk32k 0>; + #address-cells = <1>; + #size-cells = <0>; + atmel,wakeup-rtc-timer; + atmel,wakeup-rtt-timer; + status = "disabled"; + }; + + pit: timer@fffffe40 { + compatible = "atmel,at91sam9260-pit"; + reg = <0xfffffe40 0x10>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_CORE PMC_MCK>; + }; + + clk32k: sckc@fffffe50 { + compatible = "microchip,sam9x60-sckc"; + reg = <0xfffffe50 0x4>; + clocks = <&slow_xtal>; + #clock-cells = <1>; + }; + + gpbr: syscon@fffffe60 { + compatible = "microchip,sam9x60-gpbr", "atmel,at91sam9260-gpbr", "syscon"; + reg = <0xfffffe60 0x10>; + }; + + rtc: rtc@fffffea8 { + compatible = "microchip,sam9x60-rtc", "atmel,at91sam9x5-rtc"; + reg = <0xfffffea8 0x100>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&clk32k 0>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi index 2e2c1a7b1d1d..2012b7407c60 100644 --- a/arch/arm/boot/dts/sama5d2.dtsi +++ b/arch/arm/boot/dts/sama5d2.dtsi @@ -300,6 +300,8 @@ interrupts = <31 IRQ_TYPE_LEVEL_HIGH 0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 31>, <&pmc PMC_TYPE_GCK 31>, <&pmc PMC_TYPE_CORE PMC_MAIN>; clock-names = "hclock", "multclk", "baseclk"; + assigned-clocks = <&pmc PMC_TYPE_GCK 31>; + assigned-clock-rates = <480000000>; status = "disabled"; }; @@ -309,6 +311,8 @@ interrupts = <32 IRQ_TYPE_LEVEL_HIGH 0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 32>, <&pmc PMC_TYPE_GCK 32>, <&pmc PMC_TYPE_CORE PMC_MAIN>; clock-names = "hclock", "multclk", "baseclk"; + assigned-clocks = <&pmc PMC_TYPE_GCK 32>; + assigned-clock-rates = <480000000>; status = "disabled"; }; @@ -615,6 +619,7 @@ interrupts = <38 IRQ_TYPE_LEVEL_HIGH 7>; #pwm-cells = <3>; clocks = <&pmc PMC_TYPE_PERIPHERAL 38>; + status = "disabled"; }; sfr: sfr@f8030000 { @@ -689,7 +694,7 @@ #clock-cells = <0>; }; - rtc@f80480b0 { + rtc: rtc@f80480b0 { compatible = "atmel,at91rm9200-rtc"; reg = <0xf80480b0 0x30>; interrupts = <74 IRQ_TYPE_LEVEL_HIGH 7>; @@ -884,9 +889,12 @@ clocks = <&pmc PMC_TYPE_PERIPHERAL 18>; }; - secumod@fc040000 { + pioBU: secumod@fc040000 { compatible = "atmel,sama5d2-secumod", "syscon"; reg = <0xfc040000 0x100>; + + gpio-controller; + #gpio-cells = <2>; }; tdes@fc044000 { diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index f770aace0efd..203d40be70a5 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -1188,49 +1188,49 @@ usart0_clk: usart0_clk { #clock-cells = <0>; reg = <12>; - atmel,clk-output-range = <0 66000000>; + atmel,clk-output-range = <0 83000000>; }; usart1_clk: usart1_clk { #clock-cells = <0>; reg = <13>; - atmel,clk-output-range = <0 66000000>; + atmel,clk-output-range = <0 83000000>; }; usart2_clk: usart2_clk { #clock-cells = <0>; reg = <14>; - atmel,clk-output-range = <0 66000000>; + atmel,clk-output-range = <0 83000000>; }; usart3_clk: usart3_clk { #clock-cells = <0>; reg = <15>; - atmel,clk-output-range = <0 66000000>; + atmel,clk-output-range = <0 83000000>; }; uart0_clk: uart0_clk { #clock-cells = <0>; reg = <16>; - atmel,clk-output-range = <0 66000000>; + atmel,clk-output-range = <0 83000000>; }; twi0_clk: twi0_clk { reg = <18>; #clock-cells = <0>; - atmel,clk-output-range = <0 16625000>; + atmel,clk-output-range = <0 41500000>; }; twi1_clk: twi1_clk { #clock-cells = <0>; reg = <19>; - atmel,clk-output-range = <0 16625000>; + atmel,clk-output-range = <0 41500000>; }; twi2_clk: twi2_clk { #clock-cells = <0>; reg = <20>; - atmel,clk-output-range = <0 16625000>; + atmel,clk-output-range = <0 41500000>; }; mci0_clk: mci0_clk { @@ -1246,19 +1246,19 @@ spi0_clk: spi0_clk { #clock-cells = <0>; reg = <24>; - atmel,clk-output-range = <0 133000000>; + atmel,clk-output-range = <0 166000000>; }; spi1_clk: spi1_clk { #clock-cells = <0>; reg = <25>; - atmel,clk-output-range = <0 133000000>; + atmel,clk-output-range = <0 166000000>; }; tcb0_clk: tcb0_clk { #clock-cells = <0>; reg = <26>; - atmel,clk-output-range = <0 133000000>; + atmel,clk-output-range = <0 166000000>; }; pwm_clk: pwm_clk { @@ -1269,7 +1269,7 @@ adc_clk: adc_clk { #clock-cells = <0>; reg = <29>; - atmel,clk-output-range = <0 66000000>; + atmel,clk-output-range = <0 83000000>; }; dma0_clk: dma0_clk { @@ -1300,13 +1300,13 @@ ssc0_clk: ssc0_clk { #clock-cells = <0>; reg = <38>; - atmel,clk-output-range = <0 66000000>; + atmel,clk-output-range = <0 83000000>; }; ssc1_clk: ssc1_clk { #clock-cells = <0>; reg = <39>; - atmel,clk-output-range = <0 66000000>; + atmel,clk-output-range = <0 83000000>; }; sha_clk: sha_clk { diff --git a/arch/arm/boot/dts/sama5d3_can.dtsi b/arch/arm/boot/dts/sama5d3_can.dtsi index cf06a018ed0f..2470dd3fff25 100644 --- a/arch/arm/boot/dts/sama5d3_can.dtsi +++ b/arch/arm/boot/dts/sama5d3_can.dtsi @@ -36,13 +36,13 @@ can0_clk: can0_clk { #clock-cells = <0>; reg = <40>; - atmel,clk-output-range = <0 66000000>; + atmel,clk-output-range = <0 83000000>; }; can1_clk: can1_clk { #clock-cells = <0>; reg = <41>; - atmel,clk-output-range = <0 66000000>; + atmel,clk-output-range = <0 83000000>; }; }; }; diff --git a/arch/arm/boot/dts/sama5d3_tcb1.dtsi b/arch/arm/boot/dts/sama5d3_tcb1.dtsi index 1584035daf51..215802b8db30 100644 --- a/arch/arm/boot/dts/sama5d3_tcb1.dtsi +++ b/arch/arm/boot/dts/sama5d3_tcb1.dtsi @@ -22,6 +22,7 @@ tcb1_clk: tcb1_clk { #clock-cells = <0>; reg = <27>; + atmel,clk-output-range = <0 166000000>; }; }; }; diff --git a/arch/arm/boot/dts/sama5d3_uart.dtsi b/arch/arm/boot/dts/sama5d3_uart.dtsi index 4316bdbdc25d..cb62adbd28ed 100644 --- a/arch/arm/boot/dts/sama5d3_uart.dtsi +++ b/arch/arm/boot/dts/sama5d3_uart.dtsi @@ -41,13 +41,13 @@ uart0_clk: uart0_clk { #clock-cells = <0>; reg = <16>; - atmel,clk-output-range = <0 66000000>; + atmel,clk-output-range = <0 83000000>; }; uart1_clk: uart1_clk { #clock-cells = <0>; reg = <17>; - atmel,clk-output-range = <0 66000000>; + atmel,clk-output-range = <0 83000000>; }; }; }; diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi index 33836990b102..c134154bcce8 100644 --- a/arch/arm/boot/dts/sh73a0.dtsi +++ b/arch/arm/boot/dts/sh73a0.dtsi @@ -39,11 +39,18 @@ }; }; + timer@f0000200 { + compatible = "arm,cortex-a9-global-timer"; + reg = <0xf0000200 0x100>; + interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>; + clocks = <&periph_clk>; + }; + timer@f0000600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0xf0000600 0x20>; interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>; - clocks = <&twd_clk>; + clocks = <&periph_clk>; }; gic: interrupt-controller@f0001000 { @@ -110,14 +117,14 @@ <0xe6900020 1>, <0xe6900040 1>, <0xe6900060 1>; - interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp5_clks SH73A0_CLK_INTCA0>; power-domains = <&pd_a4s>; control-parent; @@ -132,14 +139,14 @@ <0xe6900024 1>, <0xe6900044 1>, <0xe6900064 1>; - interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp5_clks SH73A0_CLK_INTCA0>; power-domains = <&pd_a4s>; control-parent; @@ -154,14 +161,14 @@ <0xe6900028 1>, <0xe6900048 1>, <0xe6900068 1>; - interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp5_clks SH73A0_CLK_INTCA0>; power-domains = <&pd_a4s>; control-parent; @@ -176,14 +183,14 @@ <0xe690002c 1>, <0xe690004c 1>, <0xe690006c 1>; - interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp5_clks SH73A0_CLK_INTCA0>; power-domains = <&pd_a4s>; control-parent; @@ -194,10 +201,10 @@ #size-cells = <0>; compatible = "renesas,iic-sh73a0", "renesas,rmobile-iic"; reg = <0xe6820000 0x425>; - interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks SH73A0_CLK_IIC0>; power-domains = <&pd_a3sp>; status = "disabled"; @@ -208,10 +215,10 @@ #size-cells = <0>; compatible = "renesas,iic-sh73a0", "renesas,rmobile-iic"; reg = <0xe6822000 0x425>; - interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks SH73A0_CLK_IIC1>; power-domains = <&pd_a3sp>; status = "disabled"; @@ -222,10 +229,10 @@ #size-cells = <0>; compatible = "renesas,iic-sh73a0", "renesas,rmobile-iic"; reg = <0xe6824000 0x425>; - interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks SH73A0_CLK_IIC2>; power-domains = <&pd_a3sp>; status = "disabled"; @@ -236,10 +243,10 @@ #size-cells = <0>; compatible = "renesas,iic-sh73a0", "renesas,rmobile-iic"; reg = <0xe6826000 0x425>; - interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp4_clks SH73A0_CLK_IIC3>; power-domains = <&pd_a3sp>; status = "disabled"; @@ -250,10 +257,10 @@ #size-cells = <0>; compatible = "renesas,iic-sh73a0", "renesas,rmobile-iic"; reg = <0xe6828000 0x425>; - interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp4_clks SH73A0_CLK_IIC4>; power-domains = <&pd_c5>; status = "disabled"; @@ -262,8 +269,8 @@ mmcif: mmc@e6bd0000 { compatible = "renesas,mmcif-sh73a0", "renesas,sh-mmcif"; reg = <0xe6bd0000 0x100>; - interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks SH73A0_CLK_MMCIF0>; power-domains = <&pd_a3sp>; reg-io-width = <4>; @@ -317,9 +324,9 @@ sdhi0: sd@ee100000 { compatible = "renesas,sdhi-sh73a0"; reg = <0xee100000 0x100>; - interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks SH73A0_CLK_SDHI0>; power-domains = <&pd_a3sp>; cap-sd-highspeed; @@ -330,8 +337,8 @@ sdhi1: sd@ee120000 { compatible = "renesas,sdhi-sh73a0"; reg = <0xee120000 0x100>; - interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks SH73A0_CLK_SDHI1>; power-domains = <&pd_a3sp>; disable-wp; @@ -342,8 +349,8 @@ sdhi2: sd@ee140000 { compatible = "renesas,sdhi-sh73a0"; reg = <0xee140000 0x100>; - interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks SH73A0_CLK_SDHI2>; power-domains = <&pd_a3sp>; disable-wp; @@ -612,19 +619,25 @@ extal2_clk: extal2 { compatible = "fixed-clock"; #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; }; extcki_clk: extcki { compatible = "fixed-clock"; #clock-cells = <0>; + /* This value can be overridden by the board. */ + clock-frequency = <0>; }; fsiack_clk: fsiack { compatible = "fixed-clock"; #clock-cells = <0>; + /* This value can be overridden by the board. */ clock-frequency = <0>; }; fsibck_clk: fsibck { compatible = "fixed-clock"; #clock-cells = <0>; + /* This value can be overridden by the board. */ clock-frequency = <0>; }; @@ -812,7 +825,7 @@ clock-div = <13>; clock-mult = <1>; }; - twd_clk: twd { + periph_clk: periph { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks SH73A0_CLK_Z>; #clock-cells = <0>; diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi index ec1966480f2f..4f3993cc0227 100644 --- a/arch/arm/boot/dts/socfpga.dtsi +++ b/arch/arm/boot/dts/socfpga.dtsi @@ -85,6 +85,7 @@ clocks = <&l4_main_clk>; clock-names = "apb_pclk"; resets = <&rst DMA_RESET>; + reset-names = "dma"; }; }; @@ -747,7 +748,7 @@ nand0: nand@ff900000 { #address-cells = <0x1>; - #size-cells = <0x1>; + #size-cells = <0x0>; compatible = "altr,socfpga-denali-nand"; reg = <0xff900000 0x100000>, <0xffb80000 0x10000>; diff --git a/arch/arm/boot/dts/socfpga_arria10.dtsi b/arch/arm/boot/dts/socfpga_arria10.dtsi index a0a6d8507265..2a86e72d9791 100644 --- a/arch/arm/boot/dts/socfpga_arria10.dtsi +++ b/arch/arm/boot/dts/socfpga_arria10.dtsi @@ -68,6 +68,8 @@ #dma-requests = <32>; clocks = <&l4_main_clk>; clock-names = "apb_pclk"; + resets = <&rst DMA_RESET>, <&rst DMA_OCP_RESET>; + reset-names = "dma", "dma-ocp"; }; }; @@ -660,7 +662,7 @@ nand: nand@ffb90000 { #address-cells = <1>; - #size-cells = <1>; + #size-cells = <0>; compatible = "altr,socfpga-denali-nand"; reg = <0xffb90000 0x72000>, <0xffb80000 0x10000>; @@ -753,7 +755,8 @@ cdns,fifo-width = <4>; cdns,trigger-address = <0x00000000>; clocks = <&qspi_clk>; - resets = <&rst QSPI_RESET>; + resets = <&rst QSPI_RESET>, <&rst QSPI_OCP_RESET>; + reset-names = "qspi", "qspi-ocp"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk_nand.dts b/arch/arm/boot/dts/socfpga_arria10_socdk_nand.dts index e36e0a0f8aa6..9bd9e04c7361 100644 --- a/arch/arm/boot/dts/socfpga_arria10_socdk_nand.dts +++ b/arch/arm/boot/dts/socfpga_arria10_socdk_nand.dts @@ -9,12 +9,18 @@ &nand { status = "okay"; - partition@nand-boot { - label = "Boot and fpga data"; - reg = <0x0 0x1C00000>; - }; - partition@nand-rootfs { - label = "Root Filesystem - JFFS2"; - reg = <0x1C00000 0x6400000>; + nand@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "Boot and fpga data"; + reg = <0x0 0x1C00000>; + }; + partition@1c00000 { + label = "Root Filesystem - JFFS2"; + reg = <0x1C00000 0x6400000>; + }; }; }; diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk_qspi.dts b/arch/arm/boot/dts/socfpga_arria10_socdk_qspi.dts index b4c0a76a4d1a..2b645642b935 100644 --- a/arch/arm/boot/dts/socfpga_arria10_socdk_qspi.dts +++ b/arch/arm/boot/dts/socfpga_arria10_socdk_qspi.dts @@ -19,7 +19,7 @@ m25p,fast-read; cdns,page-size = <256>; cdns,block-size = <16>; - cdns,read-delay = <4>; + cdns,read-delay = <3>; cdns,tshsl-ns = <50>; cdns,tsd2d-ns = <50>; cdns,tchsh-ns = <4>; diff --git a/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts b/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts index 355b3dbf438d..a060718758b6 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts @@ -36,21 +36,33 @@ hps_temp0 { label = "BTN_0"; /* TEMP_OS */ - gpios = <&portc 18 GPIO_ACTIVE_LOW>; /* HPS_GPIO60 */ + gpios = <&portc 18 GPIO_ACTIVE_LOW>; /* HPS_GPI5 */ linux,code = <BTN_0>; }; hps_hkey0 { - label = "BTN_1"; /* DIS_PWR */ - gpios = <&portc 19 GPIO_ACTIVE_LOW>; /* HPS_GPIO61 */ + label = "GP_SWITCH"; /* GP_SWITCH */ + gpios = <&portc 19 GPIO_ACTIVE_LOW>; /* HPS_GPI6 */ linux,code = <BTN_1>; }; hps_hkey1 { - label = "hps_hkey1"; /* POWER_DOWN */ - gpios = <&portc 20 GPIO_ACTIVE_LOW>; /* HPS_GPIO62 */ + label = "RESET_SWITCH"; /* RESET_SWITCH */ + gpios = <&portc 20 GPIO_ACTIVE_LOW>; /* HPS_GPI7 */ + linux,code = <BTN_2>; + }; + + hps_hkey2 { + label = "POWER_DOWN"; /* POWER_DOWN */ + gpios = <&portc 4 GPIO_ACTIVE_LOW>; /* HPS_GPIO62 */ linux,code = <KEY_POWER>; }; + + hps_hkey3 { + label = "SENSE"; /* SENSE */ + gpios = <&porta 9 GPIO_ACTIVE_LOW>; /* HPS_GPIO9 */ + linux,code = <BTN_3>; + }; }; regulator-usb-nrst { @@ -84,10 +96,14 @@ rxd1-skew-ps = <0>; rxd2-skew-ps = <0>; rxd3-skew-ps = <0>; + txd0-skew-ps = <0>; + txd1-skew-ps = <0>; + txd2-skew-ps = <0>; + txd3-skew-ps = <0>; txen-skew-ps = <0>; - txc-skew-ps = <2600>; + txc-skew-ps = <1860>; rxdv-skew-ps = <0>; - rxc-skew-ps = <2000>; + rxc-skew-ps = <1860>; }; }; }; diff --git a/arch/arm/boot/dts/ste-ab8500.dtsi b/arch/arm/boot/dts/ste-ab8500.dtsi new file mode 100644 index 000000000000..14d4d8617d75 --- /dev/null +++ b/arch/arm/boot/dts/ste-ab8500.dtsi @@ -0,0 +1,328 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright 2012 Linaro Ltd + */ + +#include <dt-bindings/clock/ste-ab8500.h> + +/ { + /* Essential housekeeping hardware monitors */ + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&gpadc 0x02>, /* Battery temperature */ + <&gpadc 0x03>, /* Main charger voltage */ + <&gpadc 0x08>, /* Main battery voltage */ + <&gpadc 0x09>, /* VBUS */ + <&gpadc 0x0a>, /* Main charger current */ + <&gpadc 0x0b>, /* USB charger current */ + <&gpadc 0x0c>, /* Backup battery voltage */ + <&gpadc 0x0d>, /* Die temperature */ + <&gpadc 0x12>; /* Crystal temperature */ + }; + + soc { + prcmu@80157000 { + ab8500 { + compatible = "stericsson,ab8500"; + interrupt-parent = <&intc>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + + ab8500_clock: clock-controller { + compatible = "stericsson,ab8500-clk"; + #clock-cells = <1>; + }; + + ab8500_gpio: ab8500-gpio { + compatible = "stericsson,ab8500-gpio"; + gpio-controller; + #gpio-cells = <2>; + }; + + ab8500-rtc { + compatible = "stericsson,ab8500-rtc"; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH + 18 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "60S", "ALARM"; + }; + + gpadc: ab8500-gpadc { + compatible = "stericsson,ab8500-gpadc"; + interrupts = <32 IRQ_TYPE_LEVEL_HIGH + 39 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "HW_CONV_END", "SW_CONV_END"; + vddadc-supply = <&ab8500_ldo_tvout_reg>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + + /* GPADC channels */ + bat_ctrl: channel@01 { + reg = <0x01>; + }; + btemp_ball: channel@02 { + reg = <0x02>; + }; + main_charger_v: channel@03 { + reg = <0x03>; + }; + acc_detect1: channel@04 { + reg = <0x04>; + }; + acc_detect2: channel@05 { + reg = <0x05>; + }; + adc_aux1: channel@06 { + reg = <0x06>; + }; + adc_aux2: channel@07 { + reg = <0x07>; + }; + main_batt_v: channel@08 { + reg = <0x08>; + }; + vbus_v: channel@09 { + reg = <0x09>; + }; + main_charger_c: channel@0a { + reg = <0x0a>; + }; + usb_charger_c: channel@0b { + reg = <0x0b>; + }; + bk_bat_v: channel@0c { + reg = <0x0c>; + }; + die_temp: channel@0d { + reg = <0x0d>; + }; + usb_id: channel@0e { + reg = <0x0e>; + }; + xtal_temp: channel@12 { + reg = <0x12>; + }; + vbat_true_meas: channel@13 { + reg = <0x13>; + }; + bat_ctrl_and_ibat: channel@1c { + reg = <0x1c>; + }; + vbat_meas_and_ibat: channel@1d { + reg = <0x1d>; + }; + vbat_true_meas_and_ibat: channel@1e { + reg = <0x1e>; + }; + bat_temp_and_ibat: channel@1f { + reg = <0x1f>; + }; + }; + + ab8500_temp { + compatible = "stericsson,abx500-temp"; + io-channels = <&gpadc 0x06>, + <&gpadc 0x07>; + io-channel-name = "aux1", "aux2"; + }; + + ab8500_battery: ab8500_battery { + stericsson,battery-type = "LIPO"; + thermistor-on-batctrl; + }; + + ab8500_fg { + compatible = "stericsson,ab8500-fg"; + battery = <&ab8500_battery>; + io-channels = <&gpadc 0x08>; + io-channel-name = "main_bat_v"; + }; + + ab8500_btemp { + compatible = "stericsson,ab8500-btemp"; + battery = <&ab8500_battery>; + io-channels = <&gpadc 0x02>, + <&gpadc 0x01>; + io-channel-name = "btemp_ball", + "bat_ctrl"; + }; + + ab8500_charger { + compatible = "stericsson,ab8500-charger"; + battery = <&ab8500_battery>; + vddadc-supply = <&ab8500_ldo_tvout_reg>; + io-channels = <&gpadc 0x03>, + <&gpadc 0x0a>, + <&gpadc 0x09>, + <&gpadc 0x0b>; + io-channel-name = "main_charger_v", + "main_charger_c", + "vbus_v", + "usb_charger_c"; + }; + + ab8500_chargalg { + compatible = "stericsson,ab8500-chargalg"; + battery = <&ab8500_battery>; + }; + + ab8500_usb { + compatible = "stericsson,ab8500-usb"; + interrupts = < 90 IRQ_TYPE_LEVEL_HIGH + 96 IRQ_TYPE_LEVEL_HIGH + 14 IRQ_TYPE_LEVEL_HIGH + 15 IRQ_TYPE_LEVEL_HIGH + 79 IRQ_TYPE_LEVEL_HIGH + 74 IRQ_TYPE_LEVEL_HIGH + 75 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ID_WAKEUP_R", + "ID_WAKEUP_F", + "VBUS_DET_F", + "VBUS_DET_R", + "USB_LINK_STATUS", + "USB_ADP_PROBE_PLUG", + "USB_ADP_PROBE_UNPLUG"; + vddulpivio18-supply = <&ab8500_ldo_intcore_reg>; + v-ape-supply = <&db8500_vape_reg>; + musb_1v8-supply = <&db8500_vsmps2_reg>; + clocks = <&prcmu_clk PRCMU_SYSCLK>; + clock-names = "sysclk"; + }; + + ab8500-ponkey { + compatible = "stericsson,ab8500-poweron-key"; + interrupts = <6 IRQ_TYPE_LEVEL_HIGH + 7 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ONKEY_DBF", "ONKEY_DBR"; + }; + + ab8500-sysctrl { + compatible = "stericsson,ab8500-sysctrl"; + }; + + ab8500-pwm { + compatible = "stericsson,ab8500-pwm"; + clocks = <&ab8500_clock AB8500_SYSCLK_INT>; + clock-names = "intclk"; + }; + + ab8500-debugfs { + compatible = "stericsson,ab8500-debug"; + }; + + codec: ab8500-codec { + compatible = "stericsson,ab8500-codec"; + + V-AUD-supply = <&ab8500_ldo_audio_reg>; + V-AMIC1-supply = <&ab8500_ldo_anamic1_reg>; + V-AMIC2-supply = <&ab8500_ldo_anamic2_reg>; + V-DMIC-supply = <&ab8500_ldo_dmic_reg>; + + clocks = <&ab8500_clock AB8500_SYSCLK_AUDIO>; + clock-names = "audioclk"; + + stericsson,earpeice-cmv = <950>; /* Units in mV. */ + }; + + ext_regulators: ab8500-ext-regulators { + compatible = "stericsson,ab8500-ext-regulator"; + + ab8500_ext1_reg: ab8500_ext1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ab8500_ext2_reg: ab8500_ext2 { + regulator-min-microvolt = <1360000>; + regulator-max-microvolt = <1360000>; + regulator-boot-on; + regulator-always-on; + }; + + ab8500_ext3_reg: ab8500_ext3 { + regulator-min-microvolt = <3400000>; + regulator-max-microvolt = <3400000>; + regulator-boot-on; + }; + }; + + ab8500-regulators { + compatible = "stericsson,ab8500-regulator"; + vin-supply = <&ab8500_ext3_reg>; + + // supplies to the display/camera + ab8500_ldo_aux1_reg: ab8500_ldo_aux1 { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2900000>; + regulator-boot-on; + /* BUG: If turned off MMC will be affected. */ + regulator-always-on; + }; + + // supplies to the on-board eMMC + ab8500_ldo_aux2_reg: ab8500_ldo_aux2 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <3300000>; + }; + + // supply for VAUX3; SDcard slots + ab8500_ldo_aux3_reg: ab8500_ldo_aux3 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <3300000>; + }; + + // supply for v-intcore12; VINTCORE12 LDO + ab8500_ldo_intcore_reg: ab8500_ldo_intcore { + }; + + // supply for tvout; gpadc; TVOUT LDO + ab8500_ldo_tvout_reg: ab8500_ldo_tvout { + }; + + // supply for ab8500-vaudio; VAUDIO LDO + ab8500_ldo_audio_reg: ab8500_ldo_audio { + }; + + // supply for v-anamic1 VAMIC1 LDO + ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 { + }; + + // supply for v-amic2; VAMIC2 LDO; reuse constants for AMIC1 + ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 { + }; + + // supply for v-dmic; VDMIC LDO + ab8500_ldo_dmic_reg: ab8500_ldo_dmic { + }; + + // supply for U8500 CSI/DSI; VANA LDO + ab8500_ldo_ana_reg: ab8500_ldo_ana { + }; + }; + }; + }; + + sound { + stericsson,audio-codec = <&codec>; + clocks = <&prcmu_clk PRCMU_SYSCLK>, <&ab8500_clock AB8500_SYSCLK_ULP>, <&ab8500_clock AB8500_SYSCLK_INT>; + clock-names = "sysclk", "ulpclk", "intclk"; + }; + + mcde@a0350000 { + vana-supply = <&ab8500_ldo_ana_reg>; + + dsi@a0351000 { + vana-supply = <&ab8500_ldo_ana_reg>; + }; + dsi@a0352000 { + vana-supply = <&ab8500_ldo_ana_reg>; + }; + dsi@a0353000 { + vana-supply = <&ab8500_ldo_ana_reg>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/ste-ab8505.dtsi b/arch/arm/boot/dts/ste-ab8505.dtsi new file mode 100644 index 000000000000..c72aa250bf6f --- /dev/null +++ b/arch/arm/boot/dts/ste-ab8505.dtsi @@ -0,0 +1,275 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright 2012 Linaro Ltd + */ + +#include <dt-bindings/clock/ste-ab8500.h> + +/ { + /* Essential housekeeping hardware monitors */ + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&gpadc 0x02>, /* Battery temperature */ + <&gpadc 0x08>, /* Main battery voltage */ + <&gpadc 0x09>, /* VBUS */ + <&gpadc 0x0b>, /* Charger current */ + <&gpadc 0x0c>; /* Backup battery voltage */ + }; + + soc { + prcmu@80157000 { + ab8505 { + compatible = "stericsson,ab8505"; + interrupt-parent = <&intc>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + + ab8500_clock: clock-controller { + compatible = "stericsson,ab8500-clk"; + #clock-cells = <1>; + }; + + ab8505_gpio: ab8505-gpio { + compatible = "stericsson,ab8505-gpio"; + gpio-controller; + #gpio-cells = <2>; + }; + + ab8500-rtc { + compatible = "stericsson,ab8500-rtc"; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH + 18 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "60S", "ALARM"; + }; + + gpadc: ab8500-gpadc { + compatible = "stericsson,ab8500-gpadc"; + interrupts = <32 IRQ_TYPE_LEVEL_HIGH + 39 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "HW_CONV_END", "SW_CONV_END"; + vddadc-supply = <&ab8500_ldo_adc_reg>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + + /* GPADC channels */ + bat_ctrl: channel@01 { + reg = <0x01>; + }; + btemp_ball: channel@02 { + reg = <0x02>; + }; + acc_detect1: channel@04 { + reg = <0x04>; + }; + acc_detect2: channel@05 { + reg = <0x05>; + }; + adc_aux1: channel@06 { + reg = <0x06>; + }; + adc_aux2: channel@07 { + reg = <0x07>; + }; + main_batt_v: channel@08 { + reg = <0x08>; + }; + vbus_v: channel@09 { + reg = <0x09>; + }; + charger_c: channel@0b { + reg = <0x0b>; + }; + bk_bat_v: channel@0c { + reg = <0x0c>; + }; + usb_id: channel@0e { + reg = <0x0e>; + }; + }; + + ab8500_battery: ab8500_battery { + status = "disabled"; + thermistor-on-batctrl; + }; + + ab8500_fg { + status = "disabled"; + compatible = "stericsson,ab8500-fg"; + battery = <&ab8500_battery>; + io-channels = <&gpadc 0x08>; + io-channel-name = "main_bat_v"; + }; + + ab8500_btemp { + status = "disabled"; + compatible = "stericsson,ab8500-btemp"; + battery = <&ab8500_battery>; + io-channels = <&gpadc 0x02>, + <&gpadc 0x01>; + io-channel-name = "btemp_ball", + "bat_ctrl"; + }; + + ab8500_charger { + status = "disabled"; + compatible = "stericsson,ab8500-charger"; + battery = <&ab8500_battery>; + vddadc-supply = <&ab8500_ldo_adc_reg>; + io-channels = <&gpadc 0x09>, + <&gpadc 0x0b>; + io-channel-name = "vbus_v", + "usb_charger_c"; + }; + + ab8500_chargalg { + status = "disabled"; + compatible = "stericsson,ab8500-chargalg"; + battery = <&ab8500_battery>; + }; + + ab8500_usb: ab8500_usb { + compatible = "stericsson,ab8500-usb"; + interrupts = < 90 IRQ_TYPE_LEVEL_HIGH + 96 IRQ_TYPE_LEVEL_HIGH + 14 IRQ_TYPE_LEVEL_HIGH + 15 IRQ_TYPE_LEVEL_HIGH + 79 IRQ_TYPE_LEVEL_HIGH + 74 IRQ_TYPE_LEVEL_HIGH + 75 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ID_WAKEUP_R", + "ID_WAKEUP_F", + "VBUS_DET_F", + "VBUS_DET_R", + "USB_LINK_STATUS", + "USB_ADP_PROBE_PLUG", + "USB_ADP_PROBE_UNPLUG"; + vddulpivio18-supply = <&ab8500_ldo_intcore_reg>; + v-ape-supply = <&db8500_vape_reg>; + musb_1v8-supply = <&db8500_vsmps2_reg>; + clocks = <&prcmu_clk PRCMU_SYSCLK>; + clock-names = "sysclk"; + }; + + ab8500-ponkey { + compatible = "stericsson,ab8500-poweron-key"; + interrupts = <6 IRQ_TYPE_LEVEL_HIGH + 7 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ONKEY_DBF", "ONKEY_DBR"; + }; + + ab8500-sysctrl { + compatible = "stericsson,ab8500-sysctrl"; + }; + + ab8500-pwm { + compatible = "stericsson,ab8500-pwm"; + clocks = <&ab8500_clock AB8500_SYSCLK_INT>; + clock-names = "intclk"; + }; + + ab8500-debugfs { + compatible = "stericsson,ab8500-debug"; + }; + + codec: ab8500-codec { + compatible = "stericsson,ab8500-codec"; + + V-AUD-supply = <&ab8500_ldo_audio_reg>; + V-AMIC1-supply = <&ab8500_ldo_anamic1_reg>; + V-AMIC2-supply = <&ab8500_ldo_anamic2_reg>; + + clocks = <&ab8500_clock AB8500_SYSCLK_AUDIO>; + clock-names = "audioclk"; + + stericsson,earpeice-cmv = <950>; /* Units in mV. */ + }; + + ab8505-regulators { + compatible = "stericsson,ab8505-regulator"; + + ab8500_ldo_aux1_reg: ab8500_ldo_aux1 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3300000>; + }; + + ab8500_ldo_aux2_reg: ab8500_ldo_aux2 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <3300000>; + }; + + ab8500_ldo_aux3_reg: ab8500_ldo_aux3 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <3300000>; + }; + + ab8500_ldo_aux4_reg: ab8500_ldo_aux4 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <3300000>; + }; + + ab8500_ldo_aux5_reg: ab8500_ldo_aux5 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <2790000>; + }; + + ab8500_ldo_aux6_reg: ab8500_ldo_aux6 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <2790000>; + }; + + // supply for v-intcore12; VINTCORE12 LDO + ab8500_ldo_intcore_reg: ab8500_ldo_intcore { + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1350000>; + }; + + // supply for gpadc; ADC LDO + ab8500_ldo_adc_reg: ab8500_ldo_adc { + }; + + // supply for ab8500-vaudio; VAUDIO LDO + ab8500_ldo_audio_reg: ab8500_ldo_audio { + }; + + // supply for v-anamic1 VAMIC1 LDO + ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 { + }; + + // supply for v-amic2; VAMIC2 LDO; reuse constants for AMIC1 + ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 { + }; + + // supply for v-aux8; VAUX8 LDO + ab8500_ldo_aux8_reg: ab8500_ldo_aux8 { + }; + + // supply for U8500 CSI/DSI; VANA LDO + ab8500_ldo_ana_reg: ab8500_ldo_ana { + }; + }; + }; + }; + + sound { + stericsson,audio-codec = <&codec>; + clocks = <&prcmu_clk PRCMU_SYSCLK>, <&ab8500_clock AB8500_SYSCLK_ULP>, <&ab8500_clock AB8500_SYSCLK_INT>; + clock-names = "sysclk", "ulpclk", "intclk"; + }; + + mcde@a0350000 { + vana-supply = <&ab8500_ldo_ana_reg>; + + dsi@a0351000 { + vana-supply = <&ab8500_ldo_ana_reg>; + }; + dsi@a0352000 { + vana-supply = <&ab8500_ldo_ana_reg>; + }; + dsi@a0353000 { + vana-supply = <&ab8500_ldo_ana_reg>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/ste-db8500.dtsi b/arch/arm/boot/dts/ste-db8500.dtsi new file mode 100644 index 000000000000..d309fad32229 --- /dev/null +++ b/arch/arm/boot/dts/ste-db8500.dtsi @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "ste-dbx5x0.dtsi" + +/ { + cpus { + cpu@300 { + /* cpufreq controls */ + operating-points = <998400 0 + 800000 0 + 400000 0 + 200000 0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/ste-db8520.dtsi b/arch/arm/boot/dts/ste-db8520.dtsi new file mode 100644 index 000000000000..48bd8728ae27 --- /dev/null +++ b/arch/arm/boot/dts/ste-db8520.dtsi @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "ste-dbx5x0.dtsi" + +/ { + cpus { + cpu@300 { + /* cpufreq controls */ + operating-points = <1152000 0 + 800000 0 + 400000 0 + 200000 0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/ste-dbx5x0-pinctrl.dtsi b/arch/arm/boot/dts/ste-dbx5x0-pinctrl.dtsi new file mode 100644 index 000000000000..7bf7a2d34cbc --- /dev/null +++ b/arch/arm/boot/dts/ste-dbx5x0-pinctrl.dtsi @@ -0,0 +1,632 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright 2013 Linaro Ltd. + */ + +#include "ste-nomadik-pinctrl.dtsi" + +&pinctrl { + /* Settings for all UART default and sleep states */ + uart0 { + u0_a_1_default: u0_a_1_default { + default_mux { + function = "u0"; + groups = "u0_a_1"; + }; + default_cfg1 { + pins = "GPIO0_AJ5", "GPIO2_AH4"; /* CTS+RXD */ + ste,config = <&in_pu>; + }; + default_cfg2 { + pins = "GPIO1_AJ3", "GPIO3_AH3"; /* RTS+TXD */ + ste,config = <&out_hi>; + }; + }; + + u0_a_1_sleep: u0_a_1_sleep { + sleep_cfg1 { + pins = "GPIO0_AJ5", "GPIO2_AH4"; /* CTS+RXD */ + ste,config = <&slpm_in_wkup_pdis>; + }; + sleep_cfg2 { + pins = "GPIO1_AJ3"; /* RTS */ + ste,config = <&slpm_out_hi_wkup_pdis>; + }; + sleep_cfg3 { + pins = "GPIO3_AH3"; /* TXD */ + ste,config = <&slpm_out_wkup_pdis>; + }; + }; + }; + + uart1 { + u1rxtx_a_1_default: u1rxtx_a_1_default { + default_mux { + function = "u1"; + groups = "u1rxtx_a_1"; + }; + default_cfg1 { + pins = "GPIO4_AH6"; /* RXD */ + ste,config = <&in_pu>; + }; + default_cfg2 { + pins = "GPIO5_AG6"; /* TXD */ + ste,config = <&out_hi>; + }; + }; + + u1rxtx_a_1_sleep: u1rxtx_a_1_sleep { + sleep_cfg1 { + pins = "GPIO4_AH6"; /* RXD */ + ste,config = <&slpm_in_wkup_pdis>; + }; + sleep_cfg2 { + pins = "GPIO5_AG6"; /* TXD */ + ste,config = <&slpm_out_wkup_pdis>; + }; + }; + + u1ctsrts_a_1_default: u1ctsrts_a_1_default { + default_mux { + function = "u1"; + groups = "u1ctsrts_a_1"; + }; + default_cfg1 { + pins = "GPIO6_AF6"; /* CTS */ + ste,config = <&in_pu>; + }; + default_cfg2 { + pins = "GPIO7_AG5"; /* RTS */ + ste,config = <&out_hi>; + }; + }; + + u1ctsrts_a_1_sleep: u1ctsrts_a_1_sleep { + sleep_cfg1 { + pins = "GPIO6_AF6"; /* CTS */ + ste,config = <&slpm_in_wkup_pdis>; + }; + sleep_cfg2 { + pins = "GPIO7_AG5"; /* RTS */ + ste,config = <&slpm_out_hi_wkup_pdis>; + }; + }; + }; + + uart2 { + u2rxtx_c_1_default: u2rxtx_c_1_default { + default_mux { + function = "u2"; + groups = "u2rxtx_c_1"; + }; + default_cfg1 { + pins = "GPIO29_W2"; /* RXD */ + ste,config = <&in_pu>; + }; + default_cfg2 { + pins = "GPIO30_W3"; /* TXD */ + ste,config = <&out_hi>; + }; + }; + + u2rxtx_c_1_sleep: u2rxtx_c_1_sleep { + sleep_cfg1 { + pins = "GPIO29_W2"; /* RXD */ + ste,config = <&in_wkup_pdis>; + }; + sleep_cfg2 { + pins = "GPIO30_W3"; /* TXD */ + ste,config = <&out_wkup_pdis>; + }; + }; + }; + + /* Settings for all I2C default and sleep states */ + i2c0 { + i2c0_a_1_default: i2c0_a_1_default { + default_mux { + function = "i2c0"; + groups = "i2c0_a_1"; + }; + default_cfg1 { + pins = "GPIO147_C15", "GPIO148_B16"; /* SDA/SCL */ + ste,config = <&in_nopull>; + }; + }; + + i2c0_a_1_sleep: i2c0_a_1_sleep { + sleep_cfg1 { + pins = "GPIO147_C15", "GPIO148_B16"; /* SDA/SCL */ + ste,config = <&slpm_in_wkup_pdis>; + }; + }; + }; + + i2c1 { + i2c1_b_2_default: i2c1_b_2_default { + default_mux { + function = "i2c1"; + groups = "i2c1_b_2"; + }; + default_cfg1 { + pins = "GPIO16_AD3", "GPIO17_AD4"; /* SDA/SCL */ + ste,config = <&in_nopull>; + }; + }; + + i2c1_b_2_sleep: i2c1_b_2_sleep { + sleep_cfg1 { + pins = "GPIO16_AD3", "GPIO17_AD4"; /* SDA/SCL */ + ste,config = <&slpm_in_wkup_pdis>; + }; + }; + }; + + i2c2 { + i2c2_b_2_default: i2c2_b_2_default { + default_mux { + function = "i2c2"; + groups = "i2c2_b_2"; + }; + default_cfg1 { + pins = "GPIO10_AF5", "GPIO11_AG4"; /* SDA/SCL */ + ste,config = <&in_nopull>; + }; + }; + + i2c2_b_2_sleep: i2c2_b_2_sleep { + sleep_cfg1 { + pins = "GPIO10_AF5", "GPIO11_AG4"; /* SDA/SCL */ + ste,config = <&slpm_in_wkup_pdis>; + }; + }; + }; + + i2c3 { + i2c3_c_2_default: i2c3_c_2_default { + default_mux { + function = "i2c3"; + groups = "i2c3_c_2"; + }; + default_cfg1 { + pins = "GPIO229_AG7", "GPIO230_AF7"; /* SDA/SCL */ + ste,config = <&in_nopull>; + }; + }; + + i2c3_c_2_sleep: i2c3_c_2_sleep { + sleep_cfg1 { + pins = "GPIO229_AG7", "GPIO230_AF7"; /* SDA/SCL */ + ste,config = <&slpm_in_wkup_pdis>; + }; + }; + }; + + /* + * Activating I2C4 will conflict with UART1 about the same pins so do not + * enable I2C4 and UART1 at the same time. + */ + i2c4 { + i2c4_b_1_default: i2c4_b_1_default { + default_mux { + function = "i2c4"; + groups = "i2c4_b_1"; + }; + default_cfg1 { + pins = "GPIO4_AH6", "GPIO5_AG6"; /* SDA/SCL */ + ste,config = <&in_nopull>; + }; + }; + + i2c4_b_1_sleep: i2c4_b_1_sleep { + sleep_cfg1 { + pins = "GPIO4_AH6", "GPIO5_AG6"; /* SDA/SCL */ + ste,config = <&slpm_in_wkup_pdis>; + }; + }; + }; + + /* Settings for all MMC/SD/SDIO default and sleep states */ + sdi0 { + /* This is the external SD card slot, 4 bits wide */ + mc0_a_1_default: mc0_a_1_default { + default_mux { + function = "mc0"; + groups = "mc0_a_1"; + }; + default_cfg1 { + pins = + "GPIO18_AC2", /* CMDDIR */ + "GPIO19_AC1", /* DAT0DIR */ + "GPIO20_AB4"; /* DAT2DIR */ + ste,config = <&out_hi>; + }; + default_cfg2 { + pins = "GPIO22_AA3"; /* FBCLK */ + ste,config = <&in_nopull>; + }; + default_cfg3 { + pins = "GPIO23_AA4"; /* CLK */ + ste,config = <&out_lo>; + }; + default_cfg4 { + pins = + "GPIO24_AB2", /* CMD */ + "GPIO25_Y4", /* DAT0 */ + "GPIO26_Y2", /* DAT1 */ + "GPIO27_AA2", /* DAT2 */ + "GPIO28_AA1"; /* DAT3 */ + ste,config = <&in_pu>; + }; + }; + + mc0_a_1_sleep: mc0_a_1_sleep { + sleep_cfg1 { + pins = + "GPIO18_AC2", /* CMDDIR */ + "GPIO19_AC1", /* DAT0DIR */ + "GPIO20_AB4"; /* DAT2DIR */ + ste,config = <&slpm_out_hi_wkup_pdis>; + }; + sleep_cfg2 { + pins = + "GPIO22_AA3", /* FBCLK */ + "GPIO24_AB2", /* CMD */ + "GPIO25_Y4", /* DAT0 */ + "GPIO26_Y2", /* DAT1 */ + "GPIO27_AA2", /* DAT2 */ + "GPIO28_AA1"; /* DAT3 */ + ste,config = <&slpm_in_wkup_pdis>; + }; + sleep_cfg3 { + pins = "GPIO23_AA4"; /* CLK */ + ste,config = <&slpm_out_lo_wkup_pdis>; + }; + }; + + mc0_a_2_default: mc0_a_2_default { + default_mux { + function = "mc0"; + groups = "mc0_a_2"; + }; + default_cfg1 { + pins = "GPIO22_AA3"; /* FBCLK */ + ste,config = <&in_nopull>; + }; + default_cfg2 { + pins = "GPIO23_AA4"; /* CLK */ + ste,config = <&out_lo>; + }; + default_cfg3 { + pins = + "GPIO24_AB2", /* CMD */ + "GPIO25_Y4", /* DAT0 */ + "GPIO26_Y2", /* DAT1 */ + "GPIO27_AA2", /* DAT2 */ + "GPIO28_AA1"; /* DAT3 */ + ste,config = <&in_pu>; + }; + }; + + mc0_a_2_sleep: mc0_a_2_sleep { + sleep_cfg1 { + pins = + "GPIO22_AA3", /* FBCLK */ + "GPIO24_AB2", /* CMD */ + "GPIO25_Y4", /* DAT0 */ + "GPIO26_Y2", /* DAT1 */ + "GPIO27_AA2", /* DAT2 */ + "GPIO28_AA1"; /* DAT3 */ + ste,config = <&slpm_in_wkup_pdis>; + }; + sleep_cfg2 { + pins = "GPIO23_AA4"; /* CLK */ + ste,config = <&slpm_out_lo_wkup_pdis>; + }; + }; + }; + + sdi1 { + /* This is the WLAN SDIO 4 bits wide */ + mc1_a_1_default: mc1_a_1_default { + default_mux { + function = "mc1"; + groups = "mc1_a_1"; + }; + default_cfg1 { + pins = "GPIO208_AH16"; /* CLK */ + ste,config = <&out_lo>; + }; + default_cfg2 { + pins = "GPIO209_AG15"; /* FBCLK */ + ste,config = <&in_nopull>; + }; + default_cfg3 { + pins = + "GPIO210_AJ15", /* CMD */ + "GPIO211_AG14", /* DAT0 */ + "GPIO212_AF13", /* DAT1 */ + "GPIO213_AG13", /* DAT2 */ + "GPIO214_AH15"; /* DAT3 */ + ste,config = <&in_pu>; + }; + }; + + mc1_a_1_sleep: mc1_a_1_sleep { + sleep_cfg1 { + pins = "GPIO208_AH16"; /* CLK */ + ste,config = <&slpm_out_lo_wkup_pdis>; + }; + sleep_cfg2 { + pins = + "GPIO209_AG15", /* FBCLK */ + "GPIO210_AJ15", /* CMD */ + "GPIO211_AG14", /* DAT0 */ + "GPIO212_AF13", /* DAT1 */ + "GPIO213_AG13", /* DAT2 */ + "GPIO214_AH15"; /* DAT3 */ + ste,config = <&slpm_in_wkup_pdis>; + }; + }; + + mc1_a_2_default: mc1_a_2_default { + default_mux { + function = "mc1"; + groups = "mc1_a_2"; + }; + default_cfg1 { + pins = "GPIO208_AH16"; /* CLK */ + ste,config = <&out_lo>; + }; + default_cfg2 { + pins = + "GPIO210_AJ15", /* CMD */ + "GPIO211_AG14", /* DAT0 */ + "GPIO212_AF13", /* DAT1 */ + "GPIO213_AG13", /* DAT2 */ + "GPIO214_AH15"; /* DAT3 */ + ste,config = <&in_pu>; + }; + }; + + mc1_a_2_sleep: mc1_a_2_sleep { + sleep_cfg1 { + pins = "GPIO208_AH16"; /* CLK */ + ste,config = <&slpm_out_lo_wkup_pdis>; + }; + sleep_cfg2 { + pins = + "GPIO210_AJ15", /* CMD */ + "GPIO211_AG14", /* DAT0 */ + "GPIO212_AF13", /* DAT1 */ + "GPIO213_AG13", /* DAT2 */ + "GPIO214_AH15"; /* DAT3 */ + ste,config = <&slpm_in_wkup_pdis>; + }; + }; + }; + + sdi2 { + /* This is the eMMC 8 bits wide, usually PoP eMMC */ + mc2_a_1_default: mc2_a_1_default { + default_mux { + function = "mc2"; + groups = "mc2_a_1"; + }; + default_cfg1 { + pins = "GPIO128_A5"; /* CLK */ + ste,config = <&out_lo>; + }; + default_cfg2 { + pins = "GPIO130_C8"; /* FBCLK */ + ste,config = <&in_nopull>; + }; + default_cfg3 { + pins = + "GPIO129_B4", /* CMD */ + "GPIO131_A12", /* DAT0 */ + "GPIO132_C10", /* DAT1 */ + "GPIO133_B10", /* DAT2 */ + "GPIO134_B9", /* DAT3 */ + "GPIO135_A9", /* DAT4 */ + "GPIO136_C7", /* DAT5 */ + "GPIO137_A7", /* DAT6 */ + "GPIO138_C5"; /* DAT7 */ + ste,config = <&in_pu>; + }; + }; + + mc2_a_1_sleep: mc2_a_1_sleep { + sleep_cfg1 { + pins = "GPIO128_A5"; /* CLK */ + ste,config = <&out_lo_wkup_pdis>; + }; + sleep_cfg2 { + pins = + "GPIO130_C8", /* FBCLK */ + "GPIO129_B4"; /* CMD */ + ste,config = <&in_wkup_pdis_en>; + }; + sleep_cfg3 { + pins = + "GPIO131_A12", /* DAT0 */ + "GPIO132_C10", /* DAT1 */ + "GPIO133_B10", /* DAT2 */ + "GPIO134_B9", /* DAT3 */ + "GPIO135_A9", /* DAT4 */ + "GPIO136_C7", /* DAT5 */ + "GPIO137_A7", /* DAT6 */ + "GPIO138_C5"; /* DAT7 */ + ste,config = <&in_wkup_pdis>; + }; + }; + }; + + sdi4 { + /* This is the eMMC 8 bits wide, usually PCB-mounted eMMC */ + mc4_a_1_default: mc4_a_1_default { + default_mux { + function = "mc4"; + groups = "mc4_a_1"; + }; + default_cfg1 { + pins = "GPIO203_AE23"; /* CLK */ + ste,config = <&out_lo>; + }; + default_cfg2 { + pins = "GPIO202_AF25"; /* FBCLK */ + ste,config = <&in_nopull>; + }; + default_cfg3 { + pins = + "GPIO201_AF24", /* CMD */ + "GPIO200_AH26", /* DAT0 */ + "GPIO199_AH23", /* DAT1 */ + "GPIO198_AG25", /* DAT2 */ + "GPIO197_AH24", /* DAT3 */ + "GPIO207_AJ23", /* DAT4 */ + "GPIO206_AG24", /* DAT5 */ + "GPIO205_AG23", /* DAT6 */ + "GPIO204_AF23"; /* DAT7 */ + ste,config = <&in_pu>; + }; + }; + + mc4_a_1_sleep: mc4_a_1_sleep { + sleep_cfg1 { + pins = "GPIO203_AE23"; /* CLK */ + ste,config = <&out_lo_wkup_pdis>; + }; + sleep_cfg2 { + pins = + "GPIO202_AF25", /* FBCLK */ + "GPIO201_AF24", /* CMD */ + "GPIO200_AH26", /* DAT0 */ + "GPIO199_AH23", /* DAT1 */ + "GPIO198_AG25", /* DAT2 */ + "GPIO197_AH24", /* DAT3 */ + "GPIO207_AJ23", /* DAT4 */ + "GPIO206_AG24", /* DAT5 */ + "GPIO205_AG23", /* DAT6 */ + "GPIO204_AF23"; /* DAT7 */ + ste,config = <&slpm_in_wkup_pdis>; + }; + }; + }; + + /* + * Multi-rate serial ports (MSPs) - MSP3 output is internal and + * cannot be muxed onto any pins. + */ + msp0 { + msp0txrxtfstck_a_1_default: msp0txrxtfstck_a_1_default { + default_msp0_mux { + function = "msp0"; + groups = "msp0txrx_a_1", "msp0tfstck_a_1"; + }; + default_msp0_cfg { + pins = + "GPIO12_AC4", /* TXD */ + "GPIO15_AC3", /* RXD */ + "GPIO13_AF3", /* TFS */ + "GPIO14_AE3"; /* TCK */ + ste,config = <&in_nopull>; + }; + }; + }; + + msp1 { + msp1txrx_a_1_default: msp1txrx_a_1_default { + default_mux { + function = "msp1"; + groups = "msp1txrx_a_1", "msp1_a_1"; + }; + default_cfg1 { + pins = "GPIO33_AF2"; + ste,config = <&out_lo>; + }; + default_cfg2 { + pins = + "GPIO34_AE1", + "GPIO35_AE2", + "GPIO36_AG2"; + ste,config = <&in_nopull>; + }; + }; + }; + + msp2 { + msp2_a_1_default: msp2_a_1_default { + /* MSP2 usually used for HDMI audio */ + default_mux { + function = "msp2"; + groups = "msp2_a_1"; + }; + default_cfg1 { + pins = + "GPIO193_AH27", /* TXD */ + "GPIO194_AF27", /* TCK */ + "GPIO195_AG28"; /* TFS */ + ste,config = <&in_pd>; + }; + default_cfg2 { + pins = "GPIO196_AG26"; /* RXD */ + ste,config = <&out_lo>; + }; + }; + }; + + musb { + usb_a_1_default: usb_a_1_default { + default_mux { + function = "usb"; + groups = "usb_a_1"; + }; + default_cfg1 { + pins = + "GPIO256_AF28", /* NXT */ + "GPIO258_AD29", /* XCLK */ + "GPIO259_AC29", /* DIR */ + "GPIO260_AD28", /* DAT7 */ + "GPIO261_AD26", /* DAT6 */ + "GPIO262_AE26", /* DAT5 */ + "GPIO263_AG29", /* DAT4 */ + "GPIO264_AE27", /* DAT3 */ + "GPIO265_AD27", /* DAT2 */ + "GPIO266_AC28", /* DAT1 */ + "GPIO267_AC27"; /* DAT0 */ + ste,config = <&in_nopull>; + }; + default_cfg2 { + pins = "GPIO257_AE29"; /* STP */ + ste,config = <&out_hi>; + }; + }; + + usb_a_1_sleep: usb_a_1_sleep { + sleep_cfg1 { + pins = + "GPIO256_AF28", /* NXT */ + "GPIO258_AD29", /* XCLK */ + "GPIO259_AC29"; /* DIR */ + ste,config = <&slpm_wkup_pdis_en>; + }; + sleep_cfg2 { + pins = "GPIO257_AE29"; /* STP */ + ste,config = <&slpm_out_hi_wkup_pdis>; + }; + sleep_cfg3 { + pins = + "GPIO260_AD28", /* DAT7 */ + "GPIO261_AD26", /* DAT6 */ + "GPIO262_AE26", /* DAT5 */ + "GPIO263_AG29", /* DAT4 */ + "GPIO264_AE27", /* DAT3 */ + "GPIO265_AD27", /* DAT2 */ + "GPIO266_AC28", /* DAT1 */ + "GPIO267_AC27"; /* DAT0 */ + ste,config = <&slpm_in_wkup_pdis_en>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi index b1a31134f860..6671f74c9f03 100644 --- a/arch/arm/boot/dts/ste-dbx5x0.dtsi +++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi @@ -8,12 +8,28 @@ #include <dt-bindings/mfd/dbx500-prcmu.h> #include <dt-bindings/arm/ux500_pm_domains.h> #include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/clock/ste-ab8500.h> +#include <dt-bindings/thermal/thermal.h> / { #address-cells = <1>; #size-cells = <1>; + /* This stablilizes the device enumeration */ + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + spi0 = &spi0; + spi1 = &spi1; + spi2 = &spi2; + spi3 = &spi3; + serial0 = &serial0; + serial1 = &serial1; + serial2 = &serial2; + }; + chosen { }; @@ -36,14 +52,10 @@ device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0x300>; - /* cpufreq controls */ - operating-points = <998400 0 - 800000 0 - 400000 0 - 200000 0>; clocks = <&prcmu_clk PRCMU_ARMSS>; clock-names = "cpu"; clock-latency = <20000>; + #cooling-cells = <2>; }; CPU1: cpu@301 { device_type = "cpu"; @@ -52,10 +64,47 @@ }; }; + thermal-zones { + /* + * Thermal zone for the SoC, using the thermal sensor in the + * PRCMU for temperature and the cpufreq driver for passive + * cooling. + */ + cpu_thermal: cpu-thermal { + polling-delay-passive = <250>; + /* + * This sensor fires interrupts to update the thermal + * zone, so no polling is needed. + */ + polling-delay = <0>; + + thermal-sensors = <&thermal>; + + trips { + cpu_alert: cpu-alert { + temperature = <70000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu-crit { + temperature = <85000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + trip = <&cpu_alert>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + contribution = <100>; + }; + }; + }; + soc { #address-cells = <1>; #size-cells = <1>; - compatible = "stericsson,db8500"; + compatible = "stericsson,db8500", "simple-bus"; interrupt-parent = <&intc>; ranges; @@ -92,7 +141,7 @@ }; funnel@801a6000 { - compatible = "arm,coresight-funnel", "arm,primecell"; + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0x801a6000 0x1000>; clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>; @@ -127,7 +176,7 @@ }; replicator { - compatible = "arm,coresight-replicator"; + compatible = "arm,coresight-static-replicator"; clocks = <&prcmu_clk PRCMU_APEATCLK>; clock-names = "atclk"; @@ -286,7 +335,7 @@ }; rtc@80154000 { - compatible = "arm,rtc-pl031", "arm,primecell"; + compatible = "arm,pl031", "arm,primecell"; reg = <0x80154000 0x1000>; interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; @@ -502,13 +551,14 @@ reg = <0x80157450 0xC>; }; - thermal@801573c0 { + thermal: thermal@801573c0 { compatible = "stericsson,db8500-thermal"; reg = <0x801573c0 0x40>; + interrupt-parent = <&prcmu>; interrupts = <21 IRQ_TYPE_LEVEL_HIGH>, <22 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "IRQ_HOTMON_LOW", "IRQ_HOTMON_HIGH"; - status = "disabled"; + #thermal-sensor-cells = <0>; }; db8500-prcmu-regulators { @@ -597,209 +647,9 @@ db8500_esram34_ret_reg: db8500_esram34_ret { }; }; - - ab8500 { - compatible = "stericsson,ab8500"; - interrupt-parent = <&intc>; - interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; - interrupt-controller; - #interrupt-cells = <2>; - - ab8500_clock: clock-controller { - compatible = "stericsson,ab8500-clk"; - #clock-cells = <1>; - }; - - ab8500_gpio: ab8500-gpio { - compatible = "stericsson,ab8500-gpio"; - gpio-controller; - #gpio-cells = <2>; - }; - - ab8500-rtc { - compatible = "stericsson,ab8500-rtc"; - interrupts = <17 IRQ_TYPE_LEVEL_HIGH - 18 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "60S", "ALARM"; - }; - - ab8500-gpadc { - compatible = "stericsson,ab8500-gpadc"; - interrupts = <32 IRQ_TYPE_LEVEL_HIGH - 39 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "HW_CONV_END", "SW_CONV_END"; - vddadc-supply = <&ab8500_ldo_tvout_reg>; - }; - - ab8500_battery: ab8500_battery { - stericsson,battery-type = "LIPO"; - thermistor-on-batctrl; - }; - - ab8500_fg { - compatible = "stericsson,ab8500-fg"; - battery = <&ab8500_battery>; - }; - - ab8500_btemp { - compatible = "stericsson,ab8500-btemp"; - battery = <&ab8500_battery>; - }; - - ab8500_charger { - compatible = "stericsson,ab8500-charger"; - battery = <&ab8500_battery>; - vddadc-supply = <&ab8500_ldo_tvout_reg>; - }; - - ab8500_chargalg { - compatible = "stericsson,ab8500-chargalg"; - battery = <&ab8500_battery>; - }; - - ab8500_usb { - compatible = "stericsson,ab8500-usb"; - interrupts = < 90 IRQ_TYPE_LEVEL_HIGH - 96 IRQ_TYPE_LEVEL_HIGH - 14 IRQ_TYPE_LEVEL_HIGH - 15 IRQ_TYPE_LEVEL_HIGH - 79 IRQ_TYPE_LEVEL_HIGH - 74 IRQ_TYPE_LEVEL_HIGH - 75 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "ID_WAKEUP_R", - "ID_WAKEUP_F", - "VBUS_DET_F", - "VBUS_DET_R", - "USB_LINK_STATUS", - "USB_ADP_PROBE_PLUG", - "USB_ADP_PROBE_UNPLUG"; - vddulpivio18-supply = <&ab8500_ldo_intcore_reg>; - v-ape-supply = <&db8500_vape_reg>; - musb_1v8-supply = <&db8500_vsmps2_reg>; - clocks = <&prcmu_clk PRCMU_SYSCLK>; - clock-names = "sysclk"; - }; - - ab8500-ponkey { - compatible = "stericsson,ab8500-poweron-key"; - interrupts = <6 IRQ_TYPE_LEVEL_HIGH - 7 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "ONKEY_DBF", "ONKEY_DBR"; - }; - - ab8500-sysctrl { - compatible = "stericsson,ab8500-sysctrl"; - }; - - ab8500-pwm { - compatible = "stericsson,ab8500-pwm"; - clocks = <&ab8500_clock AB8500_SYSCLK_INT>; - clock-names = "intclk"; - }; - - ab8500-debugfs { - compatible = "stericsson,ab8500-debug"; - }; - - codec: ab8500-codec { - compatible = "stericsson,ab8500-codec"; - - V-AUD-supply = <&ab8500_ldo_audio_reg>; - V-AMIC1-supply = <&ab8500_ldo_anamic1_reg>; - V-AMIC2-supply = <&ab8500_ldo_anamic2_reg>; - V-DMIC-supply = <&ab8500_ldo_dmic_reg>; - - clocks = <&ab8500_clock AB8500_SYSCLK_AUDIO>; - clock-names = "audioclk"; - - stericsson,earpeice-cmv = <950>; /* Units in mV. */ - }; - - ext_regulators: ab8500-ext-regulators { - compatible = "stericsson,ab8500-ext-regulator"; - - ab8500_ext1_reg: ab8500_ext1 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - regulator-always-on; - }; - - ab8500_ext2_reg: ab8500_ext2 { - regulator-min-microvolt = <1360000>; - regulator-max-microvolt = <1360000>; - regulator-boot-on; - regulator-always-on; - }; - - ab8500_ext3_reg: ab8500_ext3 { - regulator-min-microvolt = <3400000>; - regulator-max-microvolt = <3400000>; - regulator-boot-on; - }; - }; - - ab8500-regulators { - compatible = "stericsson,ab8500-regulator"; - vin-supply = <&ab8500_ext3_reg>; - - // supplies to the display/camera - ab8500_ldo_aux1_reg: ab8500_ldo_aux1 { - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2900000>; - regulator-boot-on; - /* BUG: If turned off MMC will be affected. */ - regulator-always-on; - }; - - // supplies to the on-board eMMC - ab8500_ldo_aux2_reg: ab8500_ldo_aux2 { - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <3300000>; - }; - - // supply for VAUX3; SDcard slots - ab8500_ldo_aux3_reg: ab8500_ldo_aux3 { - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <3300000>; - }; - - // supply for v-intcore12; VINTCORE12 LDO - ab8500_ldo_intcore_reg: ab8500_ldo_intcore { - }; - - // supply for tvout; gpadc; TVOUT LDO - ab8500_ldo_tvout_reg: ab8500_ldo_tvout { - }; - - // supply for ab8500-usb; USB LDO - ab8500_ldo_usb_reg: ab8500_ldo_usb { - }; - - // supply for ab8500-vaudio; VAUDIO LDO - ab8500_ldo_audio_reg: ab8500_ldo_audio { - }; - - // supply for v-anamic1 VAMIC1 LDO - ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 { - }; - - // supply for v-amic2; VAMIC2 LDO; reuse constants for AMIC1 - ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 { - }; - - // supply for v-dmic; VDMIC LDO - ab8500_ldo_dmic_reg: ab8500_ldo_dmic { - }; - - // supply for U8500 CSI/DSI; VANA LDO - ab8500_ldo_ana_reg: ab8500_ldo_ana { - }; - }; - }; }; - i2c@80004000 { + i2c0: i2c@80004000 { compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; reg = <0x80004000 0x1000>; interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; @@ -812,9 +662,11 @@ clocks = <&prcc_kclk 3 3>, <&prcc_pclk 3 3>; clock-names = "i2cclk", "apb_pclk"; power-domains = <&pm_domains DOMAIN_VAPE>; + + status = "disabled"; }; - i2c@80122000 { + i2c1: i2c@80122000 { compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; reg = <0x80122000 0x1000>; interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; @@ -828,9 +680,11 @@ clocks = <&prcc_kclk 1 2>, <&prcc_pclk 1 2>; clock-names = "i2cclk", "apb_pclk"; power-domains = <&pm_domains DOMAIN_VAPE>; + + status = "disabled"; }; - i2c@80128000 { + i2c2: i2c@80128000 { compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; reg = <0x80128000 0x1000>; interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; @@ -844,9 +698,11 @@ clocks = <&prcc_kclk 1 6>, <&prcc_pclk 1 6>; clock-names = "i2cclk", "apb_pclk"; power-domains = <&pm_domains DOMAIN_VAPE>; + + status = "disabled"; }; - i2c@80110000 { + i2c3: i2c@80110000 { compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; reg = <0x80110000 0x1000>; interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; @@ -860,9 +716,11 @@ clocks = <&prcc_kclk 2 0>, <&prcc_pclk 2 0>; clock-names = "i2cclk", "apb_pclk"; power-domains = <&pm_domains DOMAIN_VAPE>; + + status = "disabled"; }; - i2c@8012a000 { + i2c4: i2c@8012a000 { compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; reg = <0x8012a000 0x1000>; interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; @@ -876,9 +734,11 @@ clocks = <&prcc_kclk 1 9>, <&prcc_pclk 1 10>; clock-names = "i2cclk", "apb_pclk"; power-domains = <&pm_domains DOMAIN_VAPE>; + + status = "disabled"; }; - spi@80002000 { + ssp0: spi@80002000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x80002000 0x1000>; interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; @@ -890,9 +750,11 @@ <&dma 8 0 0x0>; /* Logical - MemToDev */ dma-names = "rx", "tx"; power-domains = <&pm_domains DOMAIN_VAPE>; + + status = "disabled"; }; - spi@80003000 { + ssp1: spi@80003000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x80003000 0x1000>; interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; @@ -904,9 +766,11 @@ <&dma 9 0 0x0>; /* Logical - MemToDev */ dma-names = "rx", "tx"; power-domains = <&pm_domains DOMAIN_VAPE>; + + status = "disabled"; }; - spi@8011a000 { + spi0: spi@8011a000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x8011a000 0x1000>; interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; @@ -919,9 +783,11 @@ <&dma 0 0 0x0>; /* Logical - MemToDev */ dma-names = "rx", "tx"; power-domains = <&pm_domains DOMAIN_VAPE>; + + status = "disabled"; }; - spi@80112000 { + spi1: spi@80112000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x80112000 0x1000>; interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; @@ -934,9 +800,11 @@ <&dma 35 0 0x0>; /* Logical - MemToDev */ dma-names = "rx", "tx"; power-domains = <&pm_domains DOMAIN_VAPE>; + + status = "disabled"; }; - spi@80111000 { + spi2: spi@80111000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x80111000 0x1000>; interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; @@ -949,9 +817,11 @@ <&dma 33 0 0x0>; /* Logical - MemToDev */ dma-names = "rx", "tx"; power-domains = <&pm_domains DOMAIN_VAPE>; + + status = "disabled"; }; - spi@80129000 { + spi3: spi@80129000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x80129000 0x1000>; interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; @@ -964,9 +834,11 @@ <&dma 40 0 0x0>; /* Logical - MemToDev */ dma-names = "rx", "tx"; power-domains = <&pm_domains DOMAIN_VAPE>; + + status = "disabled"; }; - ux500_serial0: uart@80120000 { + serial0: uart@80120000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x80120000 0x1000>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; @@ -981,7 +853,7 @@ status = "disabled"; }; - ux500_serial1: uart@80121000 { + serial1: uart@80121000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x80121000 0x1000>; interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; @@ -996,7 +868,7 @@ status = "disabled"; }; - ux500_serial2: uart@80007000 { + serial2: uart@80007000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x80007000 0x1000>; interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; @@ -1110,9 +982,6 @@ sound { compatible = "stericsson,snd-soc-mop500"; stericsson,cpu-dai = <&msp1 &msp3>; - stericsson,audio-codec = <&codec>; - clocks = <&prcmu_clk PRCMU_SYSCLK>, <&ab8500_clock AB8500_SYSCLK_ULP>, <&ab8500_clock AB8500_SYSCLK_INT>; - clock-names = "sysclk", "ulpclk", "intclk"; }; msp0: msp@80123000 { @@ -1219,7 +1088,6 @@ reg = <0xa0350000 0x1000>; interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; epod-supply = <&db8500_b2r2_mcde_reg>; - vana-supply = <&ab8500_ldo_ana_reg>; clocks = <&prcmu_clk PRCMU_MCDECLK>, /* Main MCDE clock */ <&prcmu_clk PRCMU_LCDCLK>, /* LCD clock */ <&prcmu_clk PRCMU_PLLDSI>; /* HDMI clock */ @@ -1232,7 +1100,6 @@ dsi0: dsi@a0351000 { compatible = "ste,mcde-dsi"; reg = <0xa0351000 0x1000>; - vana-supply = <&ab8500_ldo_ana_reg>; clocks = <&prcmu_clk PRCMU_DSI0CLK>, <&prcmu_clk PRCMU_DSI0ESCCLK>; clock-names = "hs", "lp"; #address-cells = <1>; @@ -1241,7 +1108,6 @@ dsi1: dsi@a0352000 { compatible = "ste,mcde-dsi"; reg = <0xa0352000 0x1000>; - vana-supply = <&ab8500_ldo_ana_reg>; clocks = <&prcmu_clk PRCMU_DSI1CLK>, <&prcmu_clk PRCMU_DSI1ESCCLK>; clock-names = "hs", "lp"; #address-cells = <1>; @@ -1250,7 +1116,6 @@ dsi2: dsi@a0353000 { compatible = "ste,mcde-dsi"; reg = <0xa0353000 0x1000>; - vana-supply = <&ab8500_ldo_ana_reg>; /* This DSI port only has the Low Power / Energy Save clock */ clocks = <&prcmu_clk PRCMU_DSI2ESCCLK>; clock-names = "lp"; diff --git a/arch/arm/boot/dts/ste-href-ab8500.dtsi b/arch/arm/boot/dts/ste-href-ab8500.dtsi index 8e3e947d181f..4946743de7b9 100644 --- a/arch/arm/boot/dts/ste-href-ab8500.dtsi +++ b/arch/arm/boot/dts/ste-href-ab8500.dtsi @@ -3,6 +3,8 @@ * Copyright 2014 Linaro Ltd. */ +#include "ste-ab8500.dtsi" + / { soc { prcmu@80157000 { diff --git a/arch/arm/boot/dts/ste-href-ab8505.dtsi b/arch/arm/boot/dts/ste-href-ab8505.dtsi deleted file mode 100644 index 95cf38a008e9..000000000000 --- a/arch/arm/boot/dts/ste-href-ab8505.dtsi +++ /dev/null @@ -1,234 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright 2014 Linaro Ltd. - */ - -/ { - soc { - prcmu@80157000 { - ab8505 { - ab8505-gpio { - /* Hog a few default settings */ - pinctrl-names = "default"; - pinctrl-0 = <&gpio2_default_mode>, - <&gpio10_default_mode>, - <&gpio11_default_mode>, - <&gpio13_default_mode>, - <&gpio34_default_mode>, - <&gpio50_default_mode>, - <&pwm_default_mode>, - <&adi2_default_mode>, - <&modsclsda_default_mode>, - <&resethw_default_mode>, - <&service_default_mode>; - - /* - * Pins 2, 10, 11, 13, 34 and 50 - * are muxed in as GPIO, and configured as INPUT PULL DOWN - */ - gpio2 { - gpio2_default_mode: gpio2_default { - default_mux { - function = "gpio"; - groups = "gpio2_a_1"; - }; - default_cfg { - pins = "GPIO2_R5"; - input-enable; - bias-pull-down; - }; - }; - }; - gpio10 { - gpio10_default_mode: gpio10_default { - default_mux { - function = "gpio"; - groups = "gpio10_d_1"; - }; - default_cfg { - pins = "GPIO10_B16"; - input-enable; - bias-pull-down; - }; - }; - }; - gpio11 { - gpio11_default_mode: gpio11_default { - default_mux { - function = "gpio"; - groups = "gpio11_d_1"; - }; - default_cfg { - pins = "GPIO11_B17"; - input-enable; - bias-pull-down; - }; - }; - }; - gpio13 { - gpio13_default_mode: gpio13_default { - default_mux { - function = "gpio"; - groups = "gpio13_d_1"; - }; - default_cfg { - pins = "GPIO13_D17"; - input-enable; - bias-disable; - }; - }; - }; - gpio34 { - gpio34_default_mode: gpio34_default { - default_mux { - function = "gpio"; - groups = "gpio34_a_1"; - }; - default_cfg { - pins = "GPIO34_H14"; - input-enable; - bias-pull-down; - }; - }; - }; - gpio50 { - gpio50_default_mode: gpio50_default { - default_mux { - function = "gpio"; - groups = "gpio50_d_1"; - }; - default_cfg { - pins = "GPIO50_L4"; - input-enable; - bias-disable; - }; - }; - }; - /* This sets up the PWM pin 14 */ - pwm { - pwm_default_mode: pwm_default { - default_mux { - function = "pwmout"; - groups = "pwmout1_d_1"; - }; - default_cfg { - pins = "GPIO14_C16"; - input-enable; - bias-pull-down; - }; - }; - }; - /* This sets up audio interface 2 */ - adi2 { - adi2_default_mode: adi2_default { - default_mux { - function = "adi2"; - groups = "adi2_d_1"; - }; - default_cfg { - pins = "GPIO17_P2", - "GPIO18_N3", - "GPIO19_T1", - "GPIO20_P3"; - input-enable; - bias-pull-down; - }; - }; - }; - /* Modem I2C setup (SCL and SDA pins) */ - modsclsda { - modsclsda_default_mode: modsclsda_default { - default_mux { - function = "modsclsda"; - groups = "modsclsda_d_1"; - }; - default_cfg { - pins = "GPIO40_J15", - "GPIO41_J14"; - input-enable; - bias-pull-down; - }; - }; - }; - resethw { - resethw_default_mode: resethw_default { - default_mux { - function = "resethw"; - groups = "resethw_d_1"; - }; - default_cfg { - pins = "GPIO52_D16"; - input-enable; - bias-pull-down; - }; - }; - }; - service { - service_default_mode: service_default { - default_mux { - function = "service"; - groups = "service_d_1"; - }; - default_cfg { - pins = "GPIO53_D15"; - input-enable; - bias-pull-down; - }; - }; - }; - /* - * Clock output pins associated with regulators. - */ - sysclkreq2 { - sysclkreq2_default_mode: sysclkreq2_default { - default_mux { - function = "sysclkreq"; - groups = "sysclkreq2_d_1"; - }; - default_cfg { - pins = "GPIO1_N4"; - input-enable; - bias-disable; - }; - }; - sysclkreq2_sleep_mode: sysclkreq2_sleep { - default_mux { - function = "gpio"; - groups = "gpio1_a_1"; - }; - default_cfg { - pins = "GPIO1_N4"; - input-enable; - bias-pull-down; - }; - }; - }; - sysclkreq4 { - sysclkreq4_default_mode: sysclkreq4_default { - default_mux { - function = "sysclkreq"; - groups = "sysclkreq4_d_1"; - }; - default_cfg { - pins = "GPIO3_P5"; - input-enable; - bias-disable; - }; - }; - sysclkreq4_sleep_mode: sysclkreq4_sleep { - default_mux { - function = "gpio"; - groups = "gpio3_a_1"; - }; - default_cfg { - pins = "GPIO3_P5"; - input-enable; - bias-pull-down; - }; - }; - }; - }; - }; - }; - }; -}; diff --git a/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi b/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi index 86621196abda..434fa6baf71f 100644 --- a/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi +++ b/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi @@ -3,212 +3,11 @@ * Copyright 2013 Linaro Ltd. */ -#include "ste-nomadik-pinctrl.dtsi" +#include "ste-dbx5x0-pinctrl.dtsi" / { soc { pinctrl { - /* Settings for all UART default and sleep states */ - uart0 { - uart0_default_mode: uart0_default { - default_mux { - function = "u0"; - groups = "u0_a_1"; - }; - default_cfg1 { - pins = "GPIO0_AJ5", "GPIO2_AH4"; /* CTS+RXD */ - ste,config = <&in_pu>; - }; - - default_cfg2 { - pins = "GPIO1_AJ3", "GPIO3_AH3"; /* RTS+TXD */ - ste,config = <&out_hi>; - }; - }; - - uart0_sleep_mode: uart0_sleep { - sleep_cfg1 { - pins = "GPIO0_AJ5", "GPIO2_AH4"; /* CTS+RXD */ - ste,config = <&slpm_in_wkup_pdis>; - }; - - sleep_cfg2 { - pins = "GPIO1_AJ3"; /* RTS */ - ste,config = <&slpm_out_hi_wkup_pdis>; - }; - - sleep_cfg3 { - pins = "GPIO3_AH3"; /* TXD */ - ste,config = <&slpm_out_wkup_pdis>; - }; - }; - }; - - uart1 { - uart1_default_mode: uart1_default { - default_mux { - function = "u1"; - groups = "u1rxtx_a_1"; - }; - default_cfg1 { - pins = "GPIO4_AH6"; /* RXD */ - ste,config = <&in_pu>; - }; - - default_cfg2 { - pins = "GPIO5_AG6"; /* TXD */ - ste,config = <&out_hi>; - }; - }; - - uart1_sleep_mode: uart1_sleep { - sleep_cfg1 { - pins = "GPIO4_AH6"; /* RXD */ - ste,config = <&slpm_in_wkup_pdis>; - }; - - sleep_cfg2 { - pins = "GPIO5_AG6"; /* TXD */ - ste,config = <&slpm_out_wkup_pdis>; - }; - }; - }; - - uart2 { - uart2_default_mode: uart2_default { - default_mux { - function = "u2"; - groups = "u2rxtx_c_1"; - }; - default_cfg1 { - pins = "GPIO29_W2"; /* RXD */ - ste,config = <&in_pu>; - }; - - default_cfg2 { - pins = "GPIO30_W3"; /* TXD */ - ste,config = <&out_hi>; - }; - }; - - uart2_sleep_mode: uart2_sleep { - sleep_cfg1 { - pins = "GPIO29_W2"; /* RXD */ - ste,config = <&in_wkup_pdis>; - }; - - sleep_cfg2 { - pins = "GPIO30_W3"; /* TXD */ - ste,config = <&out_wkup_pdis>; - }; - }; - }; - - /* Settings for all I2C default and sleep states */ - i2c0 { - i2c0_default_mode: i2c_default { - default_mux { - function = "i2c0"; - groups = "i2c0_a_1"; - }; - default_cfg1 { - pins = "GPIO147_C15", "GPIO148_B16"; /* SDA/SCL */ - ste,config = <&in_pu>; - }; - }; - - i2c0_sleep_mode: i2c_sleep { - sleep_cfg1 { - pins = "GPIO147_C15", "GPIO148_B16"; /* SDA/SCL */ - ste,config = <&slpm_in_wkup_pdis>; - }; - }; - }; - - i2c1 { - i2c1_default_mode: i2c_default { - default_mux { - function = "i2c1"; - groups = "i2c1_b_2"; - }; - default_cfg1 { - pins = "GPIO16_AD3", "GPIO17_AD4"; /* SDA/SCL */ - ste,config = <&in_pu>; - }; - }; - - i2c1_sleep_mode: i2c_sleep { - sleep_cfg1 { - pins = "GPIO16_AD3", "GPIO17_AD4"; /* SDA/SCL */ - ste,config = <&slpm_in_wkup_pdis>; - }; - }; - }; - - i2c2 { - i2c2_default_mode: i2c_default { - default_mux { - function = "i2c2"; - groups = "i2c2_b_2"; - }; - default_cfg1 { - pins = "GPIO10_AF5", "GPIO11_AG4"; /* SDA/SCL */ - ste,config = <&in_pu>; - }; - }; - - i2c2_sleep_mode: i2c_sleep { - sleep_cfg1 { - pins = "GPIO10_AF5", "GPIO11_AG4"; /* SDA/SCL */ - ste,config = <&slpm_in_wkup_pdis>; - }; - }; - }; - - i2c3 { - i2c3_default_mode: i2c_default { - default_mux { - function = "i2c3"; - groups = "i2c3_c_2"; - }; - default_cfg1 { - pins = "GPIO229_AG7", "GPIO230_AF7"; /* SDA/SCL */ - ste,config = <&in_pu>; - }; - }; - - i2c3_sleep_mode: i2c_sleep { - sleep_cfg1 { - pins = "GPIO229_AG7", "GPIO230_AF7"; /* SDA/SCL */ - ste,config = <&slpm_in_wkup_pdis>; - }; - }; - }; - - /* - * Activating I2C4 will conflict with UART1 about the same pins so do not - * enable I2C4 and UART1 at the same time. - */ - i2c4 { - i2c4_default_mode: i2c_default { - default_mux { - function = "i2c4"; - groups = "i2c4_b_1"; - }; - default_cfg1 { - pins = "GPIO4_AH6", "GPIO5_AG6"; /* SDA/SCL */ - ste,config = <&in_pu>; - }; - }; - - i2c4_sleep_mode: i2c_sleep { - sleep_cfg1 { - pins = "GPIO4_AH6", "GPIO5_AG6"; /* SDA/SCL */ - ste,config = <&slpm_in_wkup_pdis>; - }; - }; - }; - /* Settings for all SPI default and sleep states */ spi2 { spi2_default_mode: spi_default { @@ -270,335 +69,6 @@ }; }; - /* Settings for all MMC/SD/SDIO default and sleep states */ - sdi0 { - /* This is the external SD card slot, 4 bits wide */ - sdi0_default_mode: sdi0_default { - default_mux { - function = "mc0"; - groups = "mc0_a_1"; - }; - default_cfg1 { - pins = - "GPIO18_AC2", /* CMDDIR */ - "GPIO19_AC1", /* DAT0DIR */ - "GPIO20_AB4"; /* DAT2DIR */ - ste,config = <&out_hi>; - }; - default_cfg2 { - pins = "GPIO22_AA3"; /* FBCLK */ - ste,config = <&in_nopull>; - }; - default_cfg3 { - pins = "GPIO23_AA4"; /* CLK */ - ste,config = <&out_lo>; - }; - default_cfg4 { - pins = - "GPIO24_AB2", /* CMD */ - "GPIO25_Y4", /* DAT0 */ - "GPIO26_Y2", /* DAT1 */ - "GPIO27_AA2", /* DAT2 */ - "GPIO28_AA1"; /* DAT3 */ - ste,config = <&in_pu>; - }; - }; - - sdi0_sleep_mode: sdi0_sleep { - sleep_cfg1 { - pins = - "GPIO18_AC2", /* CMDDIR */ - "GPIO19_AC1", /* DAT0DIR */ - "GPIO20_AB4"; /* DAT2DIR */ - ste,config = <&slpm_out_hi_wkup_pdis>; - }; - sleep_cfg2 { - pins = - "GPIO22_AA3", /* FBCLK */ - "GPIO24_AB2", /* CMD */ - "GPIO25_Y4", /* DAT0 */ - "GPIO26_Y2", /* DAT1 */ - "GPIO27_AA2", /* DAT2 */ - "GPIO28_AA1"; /* DAT3 */ - ste,config = <&slpm_in_wkup_pdis>; - }; - sleep_cfg3 { - pins = "GPIO23_AA4"; /* CLK */ - ste,config = <&slpm_out_lo_wkup_pdis>; - }; - }; - }; - - sdi1 { - /* This is the WLAN SDIO 4 bits wide */ - sdi1_default_mode: sdi1_default { - default_mux { - function = "mc1"; - groups = "mc1_a_1"; - }; - default_cfg1 { - pins = "GPIO208_AH16"; /* CLK */ - ste,config = <&out_lo>; - }; - default_cfg2 { - pins = "GPIO209_AG15"; /* FBCLK */ - ste,config = <&in_nopull>; - }; - default_cfg3 { - pins = - "GPIO210_AJ15", /* CMD */ - "GPIO211_AG14", /* DAT0 */ - "GPIO212_AF13", /* DAT1 */ - "GPIO213_AG13", /* DAT2 */ - "GPIO214_AH15"; /* DAT3 */ - ste,config = <&in_pu>; - }; - }; - - sdi1_sleep_mode: sdi1_sleep { - sleep_cfg1 { - pins = "GPIO208_AH16"; /* CLK */ - ste,config = <&slpm_out_lo_wkup_pdis>; - }; - sleep_cfg2 { - pins = - "GPIO209_AG15", /* FBCLK */ - "GPIO210_AJ15", /* CMD */ - "GPIO211_AG14", /* DAT0 */ - "GPIO212_AF13", /* DAT1 */ - "GPIO213_AG13", /* DAT2 */ - "GPIO214_AH15"; /* DAT3 */ - ste,config = <&slpm_in_wkup_pdis>; - }; - }; - }; - - sdi2 { - /* This is the eMMC 8 bits wide, usually PoP eMMC */ - sdi2_default_mode: sdi2_default { - default_mux { - function = "mc2"; - groups = "mc2_a_1"; - }; - default_cfg1 { - pins = "GPIO128_A5"; /* CLK */ - ste,config = <&out_lo>; - }; - default_cfg2 { - pins = "GPIO130_C8"; /* FBCLK */ - ste,config = <&in_nopull>; - }; - default_cfg3 { - pins = - "GPIO129_B4", /* CMD */ - "GPIO131_A12", /* DAT0 */ - "GPIO132_C10", /* DAT1 */ - "GPIO133_B10", /* DAT2 */ - "GPIO134_B9", /* DAT3 */ - "GPIO135_A9", /* DAT4 */ - "GPIO136_C7", /* DAT5 */ - "GPIO137_A7", /* DAT6 */ - "GPIO138_C5"; /* DAT7 */ - ste,config = <&in_pu>; - }; - }; - - sdi2_sleep_mode: sdi2_sleep { - sleep_cfg1 { - pins = "GPIO128_A5"; /* CLK */ - ste,config = <&out_lo_wkup_pdis>; - }; - sleep_cfg2 { - pins = - "GPIO130_C8", /* FBCLK */ - "GPIO129_B4"; /* CMD */ - ste,config = <&in_wkup_pdis_en>; - }; - sleep_cfg3 { - pins = - "GPIO131_A12", /* DAT0 */ - "GPIO132_C10", /* DAT1 */ - "GPIO133_B10", /* DAT2 */ - "GPIO134_B9", /* DAT3 */ - "GPIO135_A9", /* DAT4 */ - "GPIO136_C7", /* DAT5 */ - "GPIO137_A7", /* DAT6 */ - "GPIO138_C5"; /* DAT7 */ - ste,config = <&in_wkup_pdis>; - }; - }; - }; - - sdi4 { - /* This is the eMMC 8 bits wide, usually PCB-mounted eMMC */ - sdi4_default_mode: sdi4_default { - default_mux { - function = "mc4"; - groups = "mc4_a_1"; - }; - default_cfg1 { - pins = "GPIO203_AE23"; /* CLK */ - ste,config = <&out_lo>; - }; - default_cfg2 { - pins = "GPIO202_AF25"; /* FBCLK */ - ste,config = <&in_nopull>; - }; - default_cfg3 { - pins = - "GPIO201_AF24", /* CMD */ - "GPIO200_AH26", /* DAT0 */ - "GPIO199_AH23", /* DAT1 */ - "GPIO198_AG25", /* DAT2 */ - "GPIO197_AH24", /* DAT3 */ - "GPIO207_AJ23", /* DAT4 */ - "GPIO206_AG24", /* DAT5 */ - "GPIO205_AG23", /* DAT6 */ - "GPIO204_AF23"; /* DAT7 */ - ste,config = <&in_pu>; - }; - }; - - sdi4_sleep_mode: sdi4_sleep { - sleep_cfg1 { - pins = "GPIO203_AE23"; /* CLK */ - ste,config = <&out_lo_wkup_pdis>; - }; - sleep_cfg2 { - pins = - "GPIO202_AF25", /* FBCLK */ - "GPIO201_AF24", /* CMD */ - "GPIO200_AH26", /* DAT0 */ - "GPIO199_AH23", /* DAT1 */ - "GPIO198_AG25", /* DAT2 */ - "GPIO197_AH24", /* DAT3 */ - "GPIO207_AJ23", /* DAT4 */ - "GPIO206_AG24", /* DAT5 */ - "GPIO205_AG23", /* DAT6 */ - "GPIO204_AF23"; /* DAT7 */ - ste,config = <&slpm_in_wkup_pdis>; - }; - }; - }; - - /* - * Multi-rate serial ports (MSPs) - MSP3 output is internal and - * cannot be muxed onto any pins. - */ - msp0 { - msp0_default_mode: msp0_default { - default_msp0_mux { - function = "msp0"; - groups = "msp0txrx_a_1", "msp0tfstck_a_1"; - }; - default_msp0_cfg { - pins = - "GPIO12_AC4", /* TXD */ - "GPIO15_AC3", /* RXD */ - "GPIO13_AF3", /* TFS */ - "GPIO14_AE3"; /* TCK */ - ste,config = <&in_nopull>; - }; - }; - }; - - msp1 { - msp1_default_mode: msp1_default { - default_mux { - function = "msp1"; - groups = "msp1txrx_a_1", "msp1_a_1"; - }; - default_cfg1 { - pins = "GPIO33_AF2"; - ste,config = <&out_lo>; - }; - default_cfg2 { - pins = - "GPIO34_AE1", - "GPIO35_AE2", - "GPIO36_AG2"; - ste,config = <&in_nopull>; - }; - - }; - }; - - msp2 { - msp2_default_mode: msp2_default { - /* MSP2 usually used for HDMI audio */ - default_mux { - function = "msp2"; - groups = "msp2_a_1"; - }; - default_cfg1 { - pins = - "GPIO193_AH27", /* TXD */ - "GPIO194_AF27", /* TCK */ - "GPIO195_AG28"; /* TFS */ - ste,config = <&in_pd>; - }; - default_cfg2 { - pins = "GPIO196_AG26"; /* RXD */ - ste,config = <&out_lo>; - }; - }; - }; - - - musb { - musb_default_mode: musb_default { - default_mux { - function = "usb"; - groups = "usb_a_1"; - }; - default_cfg1 { - pins = - "GPIO256_AF28", /* NXT */ - "GPIO258_AD29", /* XCLK */ - "GPIO259_AC29", /* DIR */ - "GPIO260_AD28", /* DAT7 */ - "GPIO261_AD26", /* DAT6 */ - "GPIO262_AE26", /* DAT5 */ - "GPIO263_AG29", /* DAT4 */ - "GPIO264_AE27", /* DAT3 */ - "GPIO265_AD27", /* DAT2 */ - "GPIO266_AC28", /* DAT1 */ - "GPIO267_AC27"; /* DAT0 */ - ste,config = <&in_nopull>; - }; - default_cfg2 { - pins = "GPIO257_AE29"; /* STP */ - ste,config = <&out_hi>; - }; - }; - - musb_sleep_mode: musb_sleep { - sleep_cfg1 { - pins = - "GPIO256_AF28", /* NXT */ - "GPIO258_AD29", /* XCLK */ - "GPIO259_AC29"; /* DIR */ - ste,config = <&slpm_wkup_pdis_en>; - }; - sleep_cfg2 { - pins = "GPIO257_AE29"; /* STP */ - ste,config = <&slpm_out_hi_wkup_pdis>; - }; - sleep_cfg3 { - pins = - "GPIO260_AD28", /* DAT7 */ - "GPIO261_AD26", /* DAT6 */ - "GPIO262_AE26", /* DAT5 */ - "GPIO263_AG29", /* DAT4 */ - "GPIO264_AE27", /* DAT3 */ - "GPIO265_AD27", /* DAT2 */ - "GPIO266_AC28", /* DAT1 */ - "GPIO267_AC27"; /* DAT0 */ - ste,config = <&slpm_in_wkup_pdis_en>; - }; - }; - }; - mcde { lcd_default_mode: lcd_default { default_mux1 { @@ -607,7 +77,6 @@ groups = "lcdvsi0_a_1", /* VSI0 for LCD */ "lcd_d0_d7_a_1", /* Data lines */ - "lcd_d8_d11_a_1", /* TV-out */ "lcdvsi1_a_1"; /* VSI1 for HDMI */ }; default_mux2 { diff --git a/arch/arm/boot/dts/ste-href-stuib.dtsi b/arch/arm/boot/dts/ste-href-stuib.dtsi index b17998f4f7ca..e32d0c36feb8 100644 --- a/arch/arm/boot/dts/ste-href-stuib.dtsi +++ b/arch/arm/boot/dts/ste-href-stuib.dtsi @@ -38,6 +38,8 @@ interrupt-controller; vcc-supply = <&db8500_vsmps2_reg>; vio-supply = <&db8500_vsmps2_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&stmpe_stuib_mode>; wakeup-source; st,autosleep-timeout = <1024>; @@ -126,6 +128,15 @@ }; pinctrl { + /* Pull up this GPIO pin */ + stmpe { + stmpe_stuib_mode: stmpe_stuib { + stuib_cfg { + ste,pins = "GPIO218_AH11"; + ste,config = <&gpio_in_pu>; + }; + }; + }; prox { prox_stuib_mode: prox_stuib { stuib_cfg { diff --git a/arch/arm/boot/dts/ste-href-tvk1281618-r2.dtsi b/arch/arm/boot/dts/ste-href-tvk1281618-r2.dtsi new file mode 100644 index 000000000000..e024520f4d47 --- /dev/null +++ b/arch/arm/boot/dts/ste-href-tvk1281618-r2.dtsi @@ -0,0 +1,79 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Device Tree for the TVK1281618 R2 UIB + */ + +#include "ste-href-tvk1281618.dtsi" + +/ { + soc { + i2c@80128000 { + lsm303dlh@18 { + /* Accelerometer */ + compatible = "st,lsm303dlh-accel"; + st,drdy-int-pin = <1>; + drive-open-drain; + reg = <0x18>; + vdd-supply = <&ab8500_ldo_aux1_reg>; + vddio-supply = <&db8500_vsmps2_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&accel_tvk_mode>; + /* + * These interrupts cannot be used: the other component + * ST-Micro L3D4200D gyro that is connected to the same lines + * cannot set its DRDY line to open drain, so it cannot be + * shared with other peripherals. The should be defined for + * the falling edge if they could be wired together. + * + * interrupts-extended = + * <&gpio1 0 IRQ_TYPE_EDGE_FALLING>, + * <&gpio2 19 IRQ_TYPE_EDGE_FALLING>; + */ + }; + lsm303dlh@1e { + /* Magnetometer */ + compatible = "st,lsm303dlh-magn"; + reg = <0x1e>; + vdd-supply = <&ab8500_ldo_aux1_reg>; + vddio-supply = <&db8500_vsmps2_reg>; + /* + * These interrupts cannot be used: the other component + * ST-Micro L3D4200D gyro that is connected to the same lines + * cannot set its DRDY line to open drain, so it cannot be + * shared with other peripherals. The should be defined for + * the falling edge if they could be wired together. + * + * interrupts-extended = + * <&gpio1 0 IRQ_TYPE_EDGE_FALLING>, + * <&gpio2 19 IRQ_TYPE_EDGE_FALLING>; + */ + }; + lis331dl@1c { + /* Accelerometer */ + compatible = "st,lis331dl-accel"; + st,drdy-int-pin = <1>; + reg = <0x1c>; + vdd-supply = <&ab8500_ldo_aux1_reg>; + vddio-supply = <&db8500_vsmps2_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&accel_tvk_mode>; + interrupt-parent = <&gpio2>; + /* INT2 would need to be open drain */ + interrupts = <18 IRQ_TYPE_EDGE_RISING>, + <19 IRQ_TYPE_EDGE_RISING>; + }; + }; + mcde@a0350000 { + status = "okay"; + + dsi@a0351000 { + panel { + compatible = "samsung,s6d16d0"; + reg = <0>; + vdd1-supply = <&ab8500_ldo_aux1_reg>; + reset-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; + }; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi b/arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi new file mode 100644 index 000000000000..cb3677f0a1cb --- /dev/null +++ b/arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi @@ -0,0 +1,58 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Device Tree for the TVK1281618 R2 UIB + */ + +#include "ste-href-tvk1281618.dtsi" + +/ { + soc { + i2c@80128000 { + /* Marked: + * 129 + * M35 + * L3GD20 + */ + l3gd20@6a { + /* Gyroscope */ + compatible = "st,l3gd20"; + status = "disabled"; + st,drdy-int-pin = <1>; + drive-open-drain; + reg = <0x6a>; // 0x6a or 0x6b + vdd-supply = <&ab8500_ldo_aux1_reg>; + vddio-supply = <&db8500_vsmps2_reg>; + }; + /* + * Marked: + * 2122 + * C3H + * DQEEE + * LIS3DH? + */ + lis3dh@18 { + /* Accelerometer */ + compatible = "st,lis3dh-accel"; + st,drdy-int-pin = <1>; + reg = <0x18>; + vdd-supply = <&ab8500_ldo_aux1_reg>; + vddio-supply = <&db8500_vsmps2_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&accel_tvk_mode>; + }; + }; + + mcde@a0350000 { + status = "okay"; + + dsi@a0351000 { + panel { + compatible = "sony,acx424akp"; + reg = <0>; + vddi-supply = <&ab8500_ldo_aux1_reg>; + reset-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; + }; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi index 3bafd26b4824..e1dbfae22595 100644 --- a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi +++ b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi @@ -2,7 +2,7 @@ /* * Copyright 2012 ST-Ericsson AB * - * Device Tree for the TVK1281618 UIB + * Device Tree for the TVK1281618 family of UIBs */ #include <dt-bindings/interrupt-controller/irq.h> @@ -81,62 +81,8 @@ }; }; }; - /* Sensors mounted on this board variant */ + /* Sensors mounted on all board variants */ i2c@80128000 { - lsm303dlh@18 { - /* Accelerometer */ - compatible = "st,lsm303dlh-accel"; - st,drdy-int-pin = <1>; - drive-open-drain; - reg = <0x18>; - vdd-supply = <&ab8500_ldo_aux1_reg>; - vddio-supply = <&db8500_vsmps2_reg>; - pinctrl-names = "default"; - pinctrl-0 = <&accel_tvk_mode>; - /* - * These interrupts cannot be used: the other component - * ST-Micro L3D4200D gyro that is connected to the same lines - * cannot set its DRDY line to open drain, so it cannot be - * shared with other peripherals. The should be defined for - * the falling edge if they could be wired together. - * - * interrupts-extended = - * <&gpio1 0 IRQ_TYPE_EDGE_FALLING>, - * <&gpio2 19 IRQ_TYPE_EDGE_FALLING>; - */ - }; - lsm303dlh@1e { - /* Magnetometer */ - compatible = "st,lsm303dlh-magn"; - reg = <0x1e>; - vdd-supply = <&ab8500_ldo_aux1_reg>; - vddio-supply = <&db8500_vsmps2_reg>; - /* - * These interrupts cannot be used: the other component - * ST-Micro L3D4200D gyro that is connected to the same lines - * cannot set its DRDY line to open drain, so it cannot be - * shared with other peripherals. The should be defined for - * the falling edge if they could be wired together. - * - * interrupts-extended = - * <&gpio1 0 IRQ_TYPE_EDGE_FALLING>, - * <&gpio2 19 IRQ_TYPE_EDGE_FALLING>; - */ - }; - lis331dl@1c { - /* Accelerometer */ - compatible = "st,lis331dl-accel"; - st,drdy-int-pin = <1>; - reg = <0x1c>; - vdd-supply = <&ab8500_ldo_aux1_reg>; - vddio-supply = <&db8500_vsmps2_reg>; - pinctrl-names = "default"; - pinctrl-0 = <&accel_tvk_mode>; - interrupt-parent = <&gpio2>; - /* INT2 would need to be open drain */ - interrupts = <18 IRQ_TYPE_EDGE_RISING>, - <19 IRQ_TYPE_EDGE_RISING>; - }; ak8974@f { /* Magnetometer */ compatible = "asahi-kasei,ak8974"; @@ -268,18 +214,5 @@ }; }; }; - - mcde@a0350000 { - status = "okay"; - - dsi@a0351000 { - panel { - compatible = "samsung,s6d16d0"; - reg = <0>; - vdd1-supply = <&ab8500_ldo_aux1_reg>; - reset-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; - }; - }; - }; }; }; diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi index 6422c53f2046..33e3b0b3c53d 100644 --- a/arch/arm/boot/dts/ste-href.dtsi +++ b/arch/arm/boot/dts/ste-href.dtsi @@ -4,7 +4,6 @@ */ #include <dt-bindings/interrupt-controller/irq.h> -#include "ste-dbx5x0.dtsi" #include "ste-href-family-pinctrl.dtsi" / { @@ -16,41 +15,44 @@ soc { uart@80120000 { pinctrl-names = "default", "sleep"; - pinctrl-0 = <&uart0_default_mode>; - pinctrl-1 = <&uart0_sleep_mode>; + pinctrl-0 = <&u0_a_1_default>; + pinctrl-1 = <&u0_a_1_sleep>; status = "okay"; }; /* This UART is unused and thus left disabled */ uart@80121000 { pinctrl-names = "default", "sleep"; - pinctrl-0 = <&uart1_default_mode>; - pinctrl-1 = <&uart1_sleep_mode>; + pinctrl-0 = <&u1rxtx_a_1_default>; + pinctrl-1 = <&u1rxtx_a_1_sleep>; }; uart@80007000 { pinctrl-names = "default", "sleep"; - pinctrl-0 = <&uart2_default_mode>; - pinctrl-1 = <&uart2_sleep_mode>; + pinctrl-0 = <&u2rxtx_c_1_default>; + pinctrl-1 = <&u2rxtx_c_1_sleep>; status = "okay"; }; i2c@80004000 { pinctrl-names = "default","sleep"; - pinctrl-0 = <&i2c0_default_mode>; - pinctrl-1 = <&i2c0_sleep_mode>; + pinctrl-0 = <&i2c0_a_1_default>; + pinctrl-1 = <&i2c0_a_1_sleep>; + status = "okay"; }; i2c@80122000 { pinctrl-names = "default","sleep"; - pinctrl-0 = <&i2c1_default_mode>; - pinctrl-1 = <&i2c1_sleep_mode>; + pinctrl-0 = <&i2c1_b_2_default>; + pinctrl-1 = <&i2c1_b_2_sleep>; + status = "okay"; }; i2c@80128000 { pinctrl-names = "default","sleep"; - pinctrl-0 = <&i2c2_default_mode>; - pinctrl-1 = <&i2c2_sleep_mode>; + pinctrl-0 = <&i2c2_b_2_default>; + pinctrl-1 = <&i2c2_b_2_sleep>; + status = "okay"; lp5521@33 { compatible = "national,lp5521"; reg = <0x33>; @@ -96,8 +98,9 @@ i2c@80110000 { pinctrl-names = "default","sleep"; - pinctrl-0 = <&i2c3_default_mode>; - pinctrl-1 = <&i2c3_sleep_mode>; + pinctrl-0 = <&i2c3_c_2_default>; + pinctrl-1 = <&i2c3_c_2_sleep>; + status = "okay"; }; /* ST6G3244ME level translator for 1.8/2.9 V */ @@ -132,8 +135,8 @@ vmmc-supply = <&ab8500_ldo_aux3_reg>; vqmmc-supply = <&vmmci>; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdi0_default_mode>; - pinctrl-1 = <&sdi0_sleep_mode>; + pinctrl-0 = <&mc0_a_1_default &sdi0_default_mode>; + pinctrl-1 = <&mc0_a_1_sleep>; status = "okay"; }; @@ -145,8 +148,8 @@ bus-width = <4>; non-removable; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdi1_default_mode>; - pinctrl-1 = <&sdi1_sleep_mode>; + pinctrl-0 = <&mc1_a_1_default>; + pinctrl-1 = <&mc1_a_1_sleep>; status = "okay"; }; @@ -160,8 +163,8 @@ non-removable; vmmc-supply = <&db8500_vsmps2_reg>; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdi2_default_mode>; - pinctrl-1 = <&sdi2_sleep_mode>; + pinctrl-0 = <&mc2_a_1_default>; + pinctrl-1 = <&mc2_a_1_sleep>; status = "okay"; }; @@ -175,27 +178,27 @@ non-removable; vmmc-supply = <&ab8500_ldo_aux2_reg>; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdi4_default_mode>; - pinctrl-1 = <&sdi4_sleep_mode>; + pinctrl-0 = <&mc4_a_1_default>; + pinctrl-1 = <&mc4_a_1_sleep>; status = "okay"; }; msp0: msp@80123000 { pinctrl-names = "default"; - pinctrl-0 = <&msp0_default_mode>; + pinctrl-0 = <&msp0txrxtfstck_a_1_default>; status = "okay"; }; msp1: msp@80124000 { pinctrl-names = "default"; - pinctrl-0 = <&msp1_default_mode>; + pinctrl-0 = <&msp1txrx_a_1_default>; status = "okay"; }; msp2: msp@80117000 { pinctrl-names = "default"; - pinctrl-0 = <&msp2_default_mode>; + pinctrl-0 = <&msp2_a_1_default>; }; msp3: msp@80125000 { @@ -209,8 +212,8 @@ ab8500_usb { pinctrl-names = "default", "sleep"; - pinctrl-0 = <&musb_default_mode>; - pinctrl-1 = <&musb_sleep_mode>; + pinctrl-0 = <&usb_a_1_default>; + pinctrl-1 = <&usb_a_1_sleep>; }; ab8500-regulators { @@ -234,10 +237,6 @@ regulator-name = "V-TVOUT"; }; - ab8500_ldo_usb_reg: ab8500_ldo_usb { - regulator-name = "dummy"; - }; - ab8500_ldo_audio_reg: ab8500_ldo_audio { regulator-name = "V-AUD"; }; @@ -261,6 +260,14 @@ }; }; + pinctrl { + sdi0 { + sdi0_default_mode: sdi0_default { + /* Some boards set additional settings here */ + }; + }; + }; + mcde@a0350000 { pinctrl-names = "default", "sleep"; pinctrl-0 = <&lcd_default_mode>; diff --git a/arch/arm/boot/dts/ste-href520-tvk.dts b/arch/arm/boot/dts/ste-href520-tvk.dts new file mode 100644 index 000000000000..f8c0c1e6aa04 --- /dev/null +++ b/arch/arm/boot/dts/ste-href520-tvk.dts @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Device Tree for the HREF520 version with the TVK1281618 UIB + */ + +/dts-v1/; +#include "ste-db8520.dtsi" +#include "ste-hrefv60plus.dtsi" +#include "ste-href-tvk1281618-r3.dtsi" + +/ { + model = "ST-Ericsson HREF520 and TVK1281618 UIB"; + compatible = "st-ericsson,href520", "st-ericsson,u8500"; + + soc { + vmmci: regulator-gpio { + gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>; + enable-gpio = <&gpio2 14 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + }; +}; diff --git a/arch/arm/boot/dts/ste-hrefprev60-stuib.dts b/arch/arm/boot/dts/ste-hrefprev60-stuib.dts index aed940bd65a8..8ce6b723abf2 100644 --- a/arch/arm/boot/dts/ste-hrefprev60-stuib.dts +++ b/arch/arm/boot/dts/ste-hrefprev60-stuib.dts @@ -4,6 +4,7 @@ */ /dts-v1/; +#include "ste-db8500.dtsi" #include "ste-hrefprev60.dtsi" #include "ste-href-stuib.dtsi" @@ -11,24 +12,21 @@ model = "ST-Ericsson HREF (pre-v60) and ST UIB"; compatible = "st-ericsson,mop500", "st-ericsson,u8500"; - /* This stablilizes the serial port enumeration */ - aliases { - serial0 = &ux500_serial0; - serial1 = &ux500_serial1; - serial2 = &ux500_serial2; - }; - soc { /* Reset line for the BU21013 touchscreen */ i2c@80110000 { /* Only one of these will be used */ bu21013_tp@5c { - touch-gpio = <&gpio2 12 0x4>; - reset-gpio = <&tc3589x_gpio 13 0x4>; + interrupt-parent = <&gpio2>; + interrupts = <12 IRQ_TYPE_LEVEL_LOW>; + touch-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + reset-gpios = <&tc3589x_gpio 13 GPIO_LINE_OPEN_DRAIN>; }; bu21013_tp@5d { - touch-gpio = <&gpio2 12 0x4>; - reset-gpio = <&tc3589x_gpio 13 0x4>; + interrupt-parent = <&gpio2>; + interrupts = <12 IRQ_TYPE_LEVEL_LOW>; + touch-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + reset-gpios = <&tc3589x_gpio 13 GPIO_LINE_OPEN_DRAIN>; }; }; }; diff --git a/arch/arm/boot/dts/ste-hrefprev60-tvk.dts b/arch/arm/boot/dts/ste-hrefprev60-tvk.dts index 60eed262d920..142f5475521f 100644 --- a/arch/arm/boot/dts/ste-hrefprev60-tvk.dts +++ b/arch/arm/boot/dts/ste-hrefprev60-tvk.dts @@ -4,17 +4,11 @@ */ /dts-v1/; +#include "ste-db8500.dtsi" #include "ste-hrefprev60.dtsi" -#include "ste-href-tvk1281618.dtsi" +#include "ste-href-tvk1281618-r2.dtsi" / { model = "ST-Ericsson HREF (pre-v60) and TVK1281618 UIB"; compatible = "st-ericsson,mop500", "st-ericsson,u8500"; - - /* This stablilizes the serial port enumeration */ - aliases { - serial0 = &ux500_serial0; - serial1 = &ux500_serial1; - serial2 = &ux500_serial2; - }; }; diff --git a/arch/arm/boot/dts/ste-hrefprev60.dtsi b/arch/arm/boot/dts/ste-hrefprev60.dtsi index a036defdf164..115495de8612 100644 --- a/arch/arm/boot/dts/ste-hrefprev60.dtsi +++ b/arch/arm/boot/dts/ste-hrefprev60.dtsi @@ -5,7 +5,6 @@ * Device Tree for the HREF+ prior to the v60 variant. */ -#include "ste-dbx5x0.dtsi" #include "ste-href-ab8500.dtsi" #include "ste-href.dtsi" @@ -58,6 +57,7 @@ */ pinctrl-names = "default"; pinctrl-0 = <&ssp0_hrefprev60_mode>; + status = "okay"; }; // External Micro SD slot diff --git a/arch/arm/boot/dts/ste-hrefv60plus-stuib.dts b/arch/arm/boot/dts/ste-hrefv60plus-stuib.dts index 0f3c3b86bb20..1316886e6bcb 100644 --- a/arch/arm/boot/dts/ste-hrefv60plus-stuib.dts +++ b/arch/arm/boot/dts/ste-hrefv60plus-stuib.dts @@ -6,6 +6,7 @@ */ /dts-v1/; +#include "ste-db8500.dtsi" #include "ste-hrefv60plus.dtsi" #include "ste-href-stuib.dtsi" @@ -13,24 +14,21 @@ model = "ST-Ericsson HREF (v60+) and ST UIB"; compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500"; - /* This stablilizes the serial port enumeration */ - aliases { - serial0 = &ux500_serial0; - serial1 = &ux500_serial1; - serial2 = &ux500_serial2; - }; - soc { /* Reset line for the BU21013 touchscreen */ i2c@80110000 { /* Only one of these will be used */ bu21013_tp@5c { - touch-gpio = <&gpio2 20 0x4>; - reset-gpio = <&gpio4 17 0x4>; + interrupt-parent = <&gpio2>; + interrupts = <20 IRQ_TYPE_LEVEL_LOW>; + touch-gpios = <&gpio2 20 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio4 17 GPIO_LINE_OPEN_DRAIN>; }; bu21013_tp@5d { - touch-gpio = <&gpio2 20 0x4>; - reset-gpio = <&gpio4 17 0x4>; + interrupt-parent = <&gpio2>; + interrupts = <20 IRQ_TYPE_LEVEL_LOW>; + touch-gpios = <&gpio2 20 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio4 17 GPIO_LINE_OPEN_DRAIN>; }; }; }; diff --git a/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts b/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts index 73ea3100f186..5d4b8245f02c 100644 --- a/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts +++ b/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts @@ -6,17 +6,11 @@ */ /dts-v1/; +#include "ste-db8500.dtsi" #include "ste-hrefv60plus.dtsi" -#include "ste-href-tvk1281618.dtsi" +#include "ste-href-tvk1281618-r2.dtsi" / { model = "ST-Ericsson HREF (v60+) and TVK1281618 UIB"; compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500"; - - /* This stablilizes the serial port enumeration */ - aliases { - serial0 = &ux500_serial0; - serial1 = &ux500_serial1; - serial2 = &ux500_serial2; - }; }; diff --git a/arch/arm/boot/dts/ste-hrefv60plus.dtsi b/arch/arm/boot/dts/ste-hrefv60plus.dtsi index aece8eb2924f..05b4fbbba57f 100644 --- a/arch/arm/boot/dts/ste-hrefv60plus.dtsi +++ b/arch/arm/boot/dts/ste-hrefv60plus.dtsi @@ -3,7 +3,6 @@ * Copyright 2012 ST-Ericsson AB */ -#include "ste-dbx5x0.dtsi" #include "ste-href-ab8500.dtsi" #include "ste-href.dtsi" diff --git a/arch/arm/boot/dts/ste-nomadik-nhk15.dts b/arch/arm/boot/dts/ste-nomadik-nhk15.dts index 04066f9cb8a3..41ed21a4fdc1 100644 --- a/arch/arm/boot/dts/ste-nomadik-nhk15.dts +++ b/arch/arm/boot/dts/ste-nomadik-nhk15.dts @@ -212,13 +212,7 @@ */ gpio-sck = <&gpio0 5 GPIO_ACTIVE_HIGH>; gpio-mosi = <&gpio0 4 GPIO_ACTIVE_HIGH>; - /* - * It's not actually active high, but the frameworks assume - * the polarity of the passed-in GPIO is "normal" (active - * high) then actively drives the line low to select the - * chip. - */ - cs-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; num-chipselects = <1>; /* diff --git a/arch/arm/boot/dts/ste-nomadik-pinctrl.dtsi b/arch/arm/boot/dts/ste-nomadik-pinctrl.dtsi index 5673a1113aef..bfdb5d9a014f 100644 --- a/arch/arm/boot/dts/ste-nomadik-pinctrl.dtsi +++ b/arch/arm/boot/dts/ste-nomadik-pinctrl.dtsi @@ -25,6 +25,11 @@ ste,output = <OUTPUT_LOW>; }; + gpio_in_nopull: gpio_input_nopull { + ste,gpio = <GPIOMODE_ENABLED>; + ste,input = <INPUT_NOPULL>; + }; + gpio_in_pu: gpio_input_pull_up { ste,gpio = <GPIOMODE_ENABLED>; ste,input = <INPUT_PULLUP>; diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts index 3428290644ba..be90e73c923e 100644 --- a/arch/arm/boot/dts/ste-snowball.dts +++ b/arch/arm/boot/dts/ste-snowball.dts @@ -4,7 +4,7 @@ */ /dts-v1/; -#include "ste-dbx5x0.dtsi" +#include "ste-db8500.dtsi" #include "ste-href-ab8500.dtsi" #include "ste-href-family-pinctrl.dtsi" @@ -12,13 +12,6 @@ model = "Calao Systems Snowball platform with device tree"; compatible = "calaosystems,snowball-a9500", "st-ericsson,u9500"; - /* This stablilizes the serial port enumeration */ - aliases { - serial0 = &ux500_serial0; - serial1 = &ux500_serial1; - serial2 = &ux500_serial2; - }; - memory { device_type = "memory"; reg = <0x00000000 0x20000000>; @@ -156,19 +149,19 @@ msp0: msp@80123000 { pinctrl-names = "default"; - pinctrl-0 = <&msp0_default_mode>; + pinctrl-0 = <&msp0txrxtfstck_a_1_default>; status = "okay"; }; msp1: msp@80124000 { pinctrl-names = "default"; - pinctrl-0 = <&msp1_default_mode>; + pinctrl-0 = <&msp1txrx_a_1_default>; status = "okay"; }; msp2: msp@80117000 { pinctrl-names = "default"; - pinctrl-0 = <&msp2_default_mode>; + pinctrl-0 = <&msp2_a_1_default>; }; msp3: msp@80125000 { @@ -238,8 +231,8 @@ vmmc-supply = <&ab8500_ldo_aux3_reg>; vqmmc-supply = <&vmmci>; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdi0_default_mode>; - pinctrl-1 = <&sdi0_sleep_mode>; + pinctrl-0 = <&mc0_a_1_default &sdi0_default_mode>; + pinctrl-1 = <&mc0_a_1_sleep>; /* GPIO218 MMC_CD */ cd-gpios = <&gpio6 26 GPIO_ACTIVE_LOW>; @@ -253,8 +246,8 @@ max-frequency = <100000000>; bus-width = <4>; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdi1_default_mode>; - pinctrl-1 = <&sdi1_sleep_mode>; + pinctrl-0 = <&mc1_a_1_default>; + pinctrl-1 = <&mc1_a_1_sleep>; status = "okay"; }; @@ -263,7 +256,7 @@ sdi2_per3@80005000 { arm,primecell-periphid = <0x10480180>; pinctrl-names = "default"; - pinctrl-0 = <&sdi2_sleep_mode>; + pinctrl-0 = <&mc2_a_1_sleep>; status = "okay"; }; @@ -276,49 +269,52 @@ cap-mmc-highspeed; vmmc-supply = <&ab8500_ldo_aux2_reg>; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdi4_default_mode>; - pinctrl-1 = <&sdi4_sleep_mode>; + pinctrl-0 = <&mc4_a_1_default>; + pinctrl-1 = <&mc4_a_1_sleep>; status = "okay"; }; uart@80120000 { pinctrl-names = "default", "sleep"; - pinctrl-0 = <&uart0_default_mode>; - pinctrl-1 = <&uart0_sleep_mode>; + pinctrl-0 = <&u0_a_1_default>; + pinctrl-1 = <&u0_a_1_sleep>; status = "okay"; }; /* This UART is unused and thus left disabled */ uart@80121000 { pinctrl-names = "default", "sleep"; - pinctrl-0 = <&uart1_default_mode>; - pinctrl-1 = <&uart1_sleep_mode>; + pinctrl-0 = <&u1rxtx_a_1_default>; + pinctrl-1 = <&u1rxtx_a_1_sleep>; }; uart@80007000 { pinctrl-names = "default", "sleep"; - pinctrl-0 = <&uart2_default_mode>; - pinctrl-1 = <&uart2_sleep_mode>; + pinctrl-0 = <&u2rxtx_c_1_default>; + pinctrl-1 = <&u2rxtx_c_1_sleep>; status = "okay"; }; i2c@80004000 { pinctrl-names = "default","sleep"; - pinctrl-0 = <&i2c0_default_mode>; - pinctrl-1 = <&i2c0_sleep_mode>; + pinctrl-0 = <&i2c0_a_1_default>; + pinctrl-1 = <&i2c0_a_1_sleep>; + status = "okay"; }; i2c@80122000 { pinctrl-names = "default","sleep"; - pinctrl-0 = <&i2c1_default_mode>; - pinctrl-1 = <&i2c1_sleep_mode>; + pinctrl-0 = <&i2c1_b_2_default>; + pinctrl-1 = <&i2c1_b_2_sleep>; + status = "okay"; }; i2c@80128000 { pinctrl-names = "default","sleep"; - pinctrl-0 = <&i2c2_default_mode>; - pinctrl-1 = <&i2c2_sleep_mode>; + pinctrl-0 = <&i2c2_b_2_default>; + pinctrl-1 = <&i2c2_b_2_sleep>; + status = "okay"; lsm303dlh@18 { /* Accelerometer */ compatible = "st,lsm303dlh-accel"; @@ -367,49 +363,18 @@ i2c@80110000 { pinctrl-names = "default","sleep"; - pinctrl-0 = <&i2c3_default_mode>; - pinctrl-1 = <&i2c3_sleep_mode>; + pinctrl-0 = <&i2c3_c_2_default>; + pinctrl-1 = <&i2c3_c_2_sleep>; + status = "okay"; }; spi@80002000 { pinctrl-names = "default"; pinctrl-0 = <&ssp0_snowball_mode>; - }; - - cpufreq-cooling { status = "okay"; }; prcmu@80157000 { - cpufreq { - status = "okay"; - }; - - thermal@801573c0 { - num-trips = <4>; - - trip0-temp = <70000>; - trip0-type = "active"; - trip0-cdev-num = <1>; - trip0-cdev-name0 = "thermal-cpufreq-0"; - - trip1-temp = <75000>; - trip1-type = "active"; - trip1-cdev-num = <1>; - trip1-cdev-name0 = "thermal-cpufreq-0"; - - trip2-temp = <80000>; - trip2-type = "active"; - trip2-cdev-num = <1>; - trip2-cdev-name0 = "thermal-cpufreq-0"; - - trip3-temp = <85000>; - trip3-type = "critical"; - trip3-cdev-num = <0>; - - status = "okay"; - }; - ab8500 { ab8500-gpio { /* @@ -435,8 +400,8 @@ ab8500_usb { pinctrl-names = "default", "sleep"; - pinctrl-0 = <&musb_default_mode>; - pinctrl-1 = <&musb_sleep_mode>; + pinctrl-0 = <&usb_a_1_default>; + pinctrl-1 = <&usb_a_1_sleep>; }; ext_regulators: ab8500-ext-regulators { @@ -474,10 +439,6 @@ regulator-name = "V-TVOUT"; }; - ab8500_ldo_usb_reg: ab8500_ldo_usb { - regulator-name = "dummy"; - }; - ab8500_ldo_audio_reg: ab8500_ldo_audio { regulator-name = "V-AUD"; }; diff --git a/arch/arm/boot/dts/ste-ux500-samsung-golden.dts b/arch/arm/boot/dts/ste-ux500-samsung-golden.dts new file mode 100644 index 000000000000..313f0ab16866 --- /dev/null +++ b/arch/arm/boot/dts/ste-ux500-samsung-golden.dts @@ -0,0 +1,455 @@ +// SPDX-License-Identifier: GPL-2.0-only +/dts-v1/; + +#include "ste-db8500.dtsi" +#include "ste-ab8505.dtsi" +#include "ste-dbx5x0-pinctrl.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/* + * Note: This device tree cannot be booted directly with the Samsung bootloader. + * You need an intermediate, device-tree compatible bootloader + * that locks the L2 cache. Otherwise the kernel will crash after decompression. + * + * There is a port of (mainline) U-Boot, see + * https://wiki.postmarketos.org/wiki/ST-Ericsson_NovaThor_U8500#U-Boot + */ +/ { + model = "Samsung Galaxy S III mini (GT-I8190)"; + compatible = "samsung,golden", "st-ericsson,u8500"; + + chosen { + stdout-path = &serial2; + }; + + soc { + /* External Micro SD card slot */ + sdi0_per1@80126000 { + status = "okay"; + + arm,primecell-periphid = <0x10480180>; + max-frequency = <100000000>; + bus-width = <4>; + + non-removable; + /* + * Unfortunately, there is no way to enable the UHS + * modes due to a limitation of the SD level translator: + * It will either translate to 2.9V or disconnect the + * DATA lines, so switching to 1.8V signal voltage fails. + */ + cap-sd-highspeed; + cap-mmc-highspeed; + st,sig-pin-fbclk; + full-pwr-cycle; + + vmmc-supply = <&ab8500_ldo_aux3_reg>; + vqmmc-supply = <&sd_level_translator>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mc0_a_2_default>; + pinctrl-1 = <&mc0_a_2_sleep>; + }; + + /* WLAN SDIO */ + sdi1_per2@80118000 { + status = "okay"; + + arm,primecell-periphid = <0x10480180>; + max-frequency = <50000000>; + bus-width = <4>; + + non-removable; + cap-sd-highspeed; + + vmmc-supply = <&wl_reg_on>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mc1_a_2_default>; + pinctrl-1 = <&mc1_a_2_sleep>; + + #address-cells = <1>; + #size-cells = <0>; + + wifi@1 { + compatible = "brcm,bcm4329-fmac"; + reg = <1>; + + /* GPIO216 (WLAN_HOST_WAKE) */ + interrupt-parent = <&gpio6>; + interrupts = <24 IRQ_TYPE_EDGE_FALLING>; + interrupt-names = "host-wake"; + + pinctrl-names = "default"; + pinctrl-0 = <&wlan_default>; + }; + }; + + /* eMMC */ + sdi2_per3@80005000 { + status = "okay"; + + arm,primecell-periphid = <0x10480180>; + max-frequency = <100000000>; + bus-width = <8>; + + non-removable; + cap-mmc-highspeed; + mmc-ddr-1_8v; + + vmmc-supply = <&vmem_3v3>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mc2_a_1_default>; + pinctrl-1 = <&mc2_a_1_sleep>; + }; + + /* BT UART */ + uart@80120000 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&u0_a_1_default>; + pinctrl-1 = <&u0_a_1_sleep>; + + bluetooth { + compatible = "brcm,bcm4330-bt"; + /* GPIO222 (BT_VREG_ON) */ + shutdown-gpios = <&gpio6 30 GPIO_ACTIVE_HIGH>; + /* GPIO199 (BT_WAKE) */ + device-wakeup-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>; + /* GPIO97 (BT_HOST_WAKE) */ + host-wakeup-gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&bluetooth_default>; + }; + }; + + /* GPF UART */ + uart@80121000 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&u1rxtx_a_1_default &u1ctsrts_a_1_default>; + pinctrl-1 = <&u1rxtx_a_1_sleep &u1ctsrts_a_1_sleep>; + }; + + /* Debugging console UART */ + uart@80007000 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&u2rxtx_c_1_default>; + pinctrl-1 = <&u2rxtx_c_1_sleep>; + }; + + i2c@80128000 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c2_b_2_default>; + pinctrl-1 = <&i2c2_b_2_sleep>; + + imu@68 { + compatible = "invensense,mpu6050"; + reg = <0x68>; + + /* GPIO206 (ACC_INT) */ + interrupt-parent = <&gpio6>; + interrupts = <14 IRQ_TYPE_EDGE_RISING>; + + mount-matrix = "0", "1", "0", + "-1", "0", "0", + "0", "0", "1"; + + vdd-supply = <&ab8500_ldo_aux1_reg>; + vddio-supply = <&ab8500_ldo_aux8_reg>; + + pinctrl-names = "default"; + pinctrl-0 = <&imu_default>; + }; + }; + + i2c@80110000 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c3_c_2_default>; + pinctrl-1 = <&i2c3_c_2_sleep>; + + touchscreen@4a { + compatible = "atmel,maxtouch"; + reg = <0x4a>; + + /* GPIO218 (TSP_INT_1V8) */ + interrupt-parent = <&gpio6>; + interrupts = <26 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default"; + pinctrl-0 = <&tsp_default>; + }; + }; + + prcmu@80157000 { + ab8505 { + ab8500_usb { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&usb_a_1_default>; + pinctrl-1 = <&usb_a_1_sleep>; + }; + + ab8505-regulators { + ab8500_ldo_aux1 { + regulator-name = "sensor_3v"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + ab8500_ldo_aux2 { + regulator-name = "vreg_tsp_a3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; /* FIXME */ + }; + + ab8500_ldo_aux3 { + regulator-name = "vdd_tf_2v91"; + }; + + ab8500_ldo_aux4 { + regulator-name = "key_led_3.3v"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ab8500_ldo_aux5 { + regulator-name = "vreg_tsp_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; /* FIXME */ + }; + + ab8500_ldo_aux6 { + regulator-name = "touch_key_2.2v"; + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <2200000>; + }; + + ab8500_ldo_aux8 { + regulator-name = "sensor_1v8"; + }; + }; + }; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_default>; + + label = "GPIO Buttons"; + + volume-up { + label = "Volume Up"; + /* GPIO67 (VOL_UP) */ + gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + + volume-down { + label = "Volume Down"; + /* GPIO92 (VOL_DOWN) */ + gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEDOWN>; + }; + + home { + label = "Home"; + /* GPIO91 (HOME_KEY) */ + gpios = <&gpio2 27 GPIO_ACTIVE_LOW>; + linux,code = <KEY_HOMEPAGE>; + }; + }; + + vibrator { + compatible = "gpio-vibrator"; + /* GPIO195 (MOT_EN) */ + enable-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&vibrator_default>; + }; + + /* External LDO for eMMC */ + vmem_3v3: regulator-vmem { + compatible = "regulator-fixed"; + + regulator-name = "vmem_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + + startup-delay-us = <200>; + + /* GPIO223 (MEM_LDO_EN) */ + gpio = <&gpio6 31 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&mem_ldo_default>; + }; + + /* TI TXS0206-29 level translator for 2.9 V */ + sd_level_translator: regulator-sd-level-translator { + compatible = "regulator-fixed"; + + regulator-name = "sd-level-translator"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + + startup-delay-us = <200>; + + /* GPIO87 (TXS0206-29_EN) */ + gpios = <&gpio2 23 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&sd_level_translator_default>; + }; + + /* + * WL_REG_ON takes WLAN out of reset and enables the internal regulators. + * The voltage specified here is only used to determine the OCR mask, + * the BCM chip is actually connected directly to VBAT. + */ + wl_reg_on: regulator-wl-reg-on { + compatible = "regulator-fixed"; + + regulator-name = "wl-reg-on"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + + startup-delay-us = <100000>; + + /* GPIO215 (WLAN_EN) */ + gpio = <&gpio6 23 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&wlan_en_default>; + }; +}; + +&pinctrl { + gpio-keys { + gpio_keys_default: gpio_keys_default { + golden_cfg1 { + pins = "GPIO67", /* VOL_UP */ + "GPIO91", /* HOME_KEY */ + "GPIO92"; /* VOL_DOWN */ + ste,config = <&gpio_in_pu>; + }; + }; + }; + + sdi0 { + sd_level_translator_default: sd_level_translator_default { + golden_cfg1 { + pins = "GPIO87_B3"; /* TXS0206-29_EN */ + ste,config = <&gpio_out_lo>; + }; + }; + }; + + sdi2 { + mem_ldo_default: mem_ldo_default { + golden_cfg1 { + pins = "GPIO223_AH9"; /* MEM_LDO_EN */ + ste,config = <&gpio_out_hi>; + }; + }; + }; + + imu { + imu_default: imu_default { + golden_cfg1 { + pins = "GPIO206_AG24"; /* ACC_INT */ + ste,config = <&gpio_in_pd>; + }; + }; + }; + + tsp { + tsp_default: tsp_default { + golden_cfg1 { + pins = "GPIO218_AH11"; /* TSP_INT_1V8 */ + ste,config = <&gpio_in_nopull>; + }; + }; + }; + + wlan { + wlan_default: wlan_default { + golden_cfg1 { + pins = "GPIO216_AG12"; /* WLAN_HOST_WAKE */ + ste,config = <&gpio_in_pd>; + }; + }; + + wlan_en_default: wlan_en_default { + golden_cfg1 { + pins = "GPIO215_AH13"; /* WLAN_EN */ + ste,config = <&gpio_out_lo>; + }; + }; + }; + + bluetooth { + bluetooth_default: bluetooth_default { + golden_cfg1 { + pins = "GPIO199_AH23", /* BT_WAKE */ + "GPIO222_AJ9"; /* BT_VREG_ON */ + ste,config = <&gpio_out_lo>; + }; + golden_cfg2 { + pins = "GPIO97_D9"; /* BT_HOST_WAKE */ + ste,config = <&gpio_in_nopull>; + }; + }; + }; + + vibrator { + vibrator_default: vibrator_default { + golden_cfg1 { + pins = "GPIO195_AG28"; /* MOT_EN */ + ste,config = <&gpio_out_lo>; + }; + }; + }; +}; + +&ab8505_gpio { + /* Hog a few default settings */ + pinctrl-names = "default"; + pinctrl-0 = <&gpio_default>; + + gpio { + gpio_default: gpio_default { + golden_mux { + /* Change unused pins to GPIO mode */ + function = "gpio"; + groups = "gpio3_a_1", /* default: SysClkReq4 */ + "gpio14_a_1"; /* default: PWMOut1 */ + }; + golden_cfg1 { + pins = "GPIO11_B17", "GPIO13_D17", "GPIO50_L4"; + bias-disable; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/stih410-b2260.dts b/arch/arm/boot/dts/stih410-b2260.dts index 4fbd8e9eb5b7..e2bb59783146 100644 --- a/arch/arm/boot/dts/stih410-b2260.dts +++ b/arch/arm/boot/dts/stih410-b2260.dts @@ -178,9 +178,6 @@ phy-mode = "rgmii"; pinctrl-0 = <&pinctrl_rgmii1 &pinctrl_rgmii1_mdio_1>; - snps,phy-bus-name = "stmmac"; - snps,phy-bus-id = <0>; - snps,phy-addr = <0>; snps,reset-gpio = <&pio0 7 0>; snps,reset-active-low; snps,reset-delays-us = <0 10000 1000000>; diff --git a/arch/arm/boot/dts/stihxxx-b2120.dtsi b/arch/arm/boot/dts/stihxxx-b2120.dtsi index 60e11045ad76..d051f080e52e 100644 --- a/arch/arm/boot/dts/stihxxx-b2120.dtsi +++ b/arch/arm/boot/dts/stihxxx-b2120.dtsi @@ -46,7 +46,7 @@ /* DAC */ format = "i2s"; mclk-fs = <256>; - frame-inversion = <1>; + frame-inversion; cpu { sound-dai = <&sti_uni_player2>; }; diff --git a/arch/arm/boot/dts/stm32429i-eval.dts b/arch/arm/boot/dts/stm32429i-eval.dts index 73ea84df7bf4..c27fa355e5ab 100644 --- a/arch/arm/boot/dts/stm32429i-eval.dts +++ b/arch/arm/boot/dts/stm32429i-eval.dts @@ -60,7 +60,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@00000000 { device_type = "memory"; reg = <0x00000000 0x2000000>; }; @@ -81,18 +81,25 @@ dma-ranges = <0xc0000000 0x0 0x10000000>; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; + vdda: regulator-vdda { + compatible = "regulator-fixed"; + regulator-name = "vdda"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; - reg_vref: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "vref"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; + vref: regulator-vref { + compatible = "regulator-fixed"; + regulator-name = "vref"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vdd_panel: vdd-panel { + compatible = "regulator-fixed"; + regulator-name = "vdd_panel"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; }; leds { @@ -138,6 +145,7 @@ panel_rgb: panel-rgb { compatible = "ampire,am-480272h3tmqw-t01h"; + power-supply = <&vdd_panel>; status = "okay"; port { panel_in_rgb: endpoint { @@ -157,7 +165,8 @@ &adc { pinctrl-names = "default"; pinctrl-0 = <&adc3_in8_pin>; - vref-supply = <®_vref>; + vdda-supply = <&vdda>; + vref-supply = <&vref>; status = "okay"; adc3: adc@200 { st,adc-channels = <8>; @@ -233,7 +242,6 @@ status = "okay"; pinctrl-0 = <<dc_pins>; pinctrl-names = "default"; - dma-ranges; port { ltdc_out_rgb: endpoint { diff --git a/arch/arm/boot/dts/stm32746g-eval.dts b/arch/arm/boot/dts/stm32746g-eval.dts index 2b1664884ae7..fcc804e3c158 100644 --- a/arch/arm/boot/dts/stm32746g-eval.dts +++ b/arch/arm/boot/dts/stm32746g-eval.dts @@ -55,7 +55,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@c0000000 { device_type = "memory"; reg = <0xc0000000 0x2000000>; }; @@ -95,7 +95,6 @@ joystick { compatible = "gpio-keys"; - #size-cells = <0>; pinctrl-0 = <&joystick_pins>; pinctrl-names = "default"; button-0 { diff --git a/arch/arm/boot/dts/stm32f4-pinctrl.dtsi b/arch/arm/boot/dts/stm32f4-pinctrl.dtsi index 35202896c093..392fa143ce07 100644 --- a/arch/arm/boot/dts/stm32f4-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32f4-pinctrl.dtsi @@ -163,7 +163,7 @@ st,bank-name = "GPIOK"; }; - usart1_pins_a: usart1@0 { + usart1_pins_a: usart1-0 { pins1 { pinmux = <STM32_PINMUX('A', 9, AF7)>; /* USART1_TX */ bias-disable; @@ -176,7 +176,7 @@ }; }; - usart3_pins_a: usart3@0 { + usart3_pins_a: usart3-0 { pins1 { pinmux = <STM32_PINMUX('B', 10, AF7)>; /* USART3_TX */ bias-disable; @@ -189,7 +189,7 @@ }; }; - usbotg_fs_pins_a: usbotg_fs@0 { + usbotg_fs_pins_a: usbotg-fs-0 { pins { pinmux = <STM32_PINMUX('A', 10, AF10)>, /* OTG_FS_ID */ <STM32_PINMUX('A', 11, AF10)>, /* OTG_FS_DM */ @@ -200,7 +200,7 @@ }; }; - usbotg_fs_pins_b: usbotg_fs@1 { + usbotg_fs_pins_b: usbotg-fs-1 { pins { pinmux = <STM32_PINMUX('B', 12, AF12)>, /* OTG_HS_ID */ <STM32_PINMUX('B', 14, AF12)>, /* OTG_HS_DM */ @@ -211,7 +211,7 @@ }; }; - usbotg_hs_pins_a: usbotg_hs@0 { + usbotg_hs_pins_a: usbotg-hs-0 { pins { pinmux = <STM32_PINMUX('H', 4, AF10)>, /* OTG_HS_ULPI_NXT*/ <STM32_PINMUX('I', 11, AF10)>, /* OTG_HS_ULPI_DIR */ @@ -231,7 +231,7 @@ }; }; - ethernet_mii: mii@0 { + ethernet_mii: mii-0 { pins { pinmux = <STM32_PINMUX('G', 13, AF11)>, /* ETH_MII_TXD0_ETH_RMII_TXD0 */ <STM32_PINMUX('G', 14, AF11)>, /* ETH_MII_TXD1_ETH_RMII_TXD1 */ @@ -251,13 +251,13 @@ }; }; - adc3_in8_pin: adc@200 { + adc3_in8_pin: adc-200 { pins { pinmux = <STM32_PINMUX('F', 10, ANALOG)>; }; }; - pwm1_pins: pwm@1 { + pwm1_pins: pwm-1 { pins { pinmux = <STM32_PINMUX('A', 8, AF1)>, /* TIM1_CH1 */ <STM32_PINMUX('B', 13, AF1)>, /* TIM1_CH1N */ @@ -265,14 +265,14 @@ }; }; - pwm3_pins: pwm@3 { + pwm3_pins: pwm-3 { pins { pinmux = <STM32_PINMUX('B', 4, AF2)>, /* TIM3_CH1 */ <STM32_PINMUX('B', 5, AF2)>; /* TIM3_CH2 */ }; }; - i2c1_pins: i2c1@0 { + i2c1_pins: i2c1-0 { pins { pinmux = <STM32_PINMUX('B', 9, AF4)>, /* I2C1_SDA */ <STM32_PINMUX('B', 6, AF4)>; /* I2C1_SCL */ @@ -282,7 +282,7 @@ }; }; - ltdc_pins: ltdc@0 { + ltdc_pins: ltdc-0 { pins { pinmux = <STM32_PINMUX('I', 12, AF14)>, /* LCD_HSYNC */ <STM32_PINMUX('I', 13, AF14)>, /* LCD_VSYNC */ @@ -316,7 +316,7 @@ }; }; - dcmi_pins: dcmi@0 { + dcmi_pins: dcmi-0 { pins { pinmux = <STM32_PINMUX('A', 4, AF13)>, /* DCMI_HSYNC */ <STM32_PINMUX('B', 7, AF13)>, /* DCMI_VSYNC */ @@ -339,7 +339,7 @@ }; }; - sdio_pins: sdio_pins@0 { + sdio_pins: sdio-pins-0 { pins { pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDIO_D0 */ <STM32_PINMUX('C', 9, AF12)>, /* SDIO_D1 */ @@ -352,7 +352,7 @@ }; }; - sdio_pins_od: sdio_pins_od@0 { + sdio_pins_od: sdio-pins-od-0 { pins1 { pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDIO_D0 */ <STM32_PINMUX('C', 9, AF12)>, /* SDIO_D1 */ diff --git a/arch/arm/boot/dts/stm32f429-disco.dts b/arch/arm/boot/dts/stm32f429-disco.dts index e19d0fe7dbda..30c0f6717871 100644 --- a/arch/arm/boot/dts/stm32f429-disco.dts +++ b/arch/arm/boot/dts/stm32f429-disco.dts @@ -59,7 +59,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@90000000 { device_type = "memory"; reg = <0x90000000 0x800000>; }; diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi index 4a4954492ed1..d7770699feb5 100644 --- a/arch/arm/boot/dts/stm32f429.dtsi +++ b/arch/arm/boot/dts/stm32f429.dtsi @@ -80,7 +80,7 @@ }; soc { - romem: nvmem@1fff7800 { + romem: efuse@1fff7800 { compatible = "st,stm32f4-otp"; reg = <0x1fff7800 0x400>; #address-cells = <1>; @@ -112,6 +112,7 @@ pwm { compatible = "st,stm32-pwm"; + #pwm-cells = <3>; status = "disabled"; }; @@ -141,6 +142,7 @@ pwm { compatible = "st,stm32-pwm"; + #pwm-cells = <3>; status = "disabled"; }; @@ -170,6 +172,7 @@ pwm { compatible = "st,stm32-pwm"; + #pwm-cells = <3>; status = "disabled"; }; @@ -198,6 +201,7 @@ pwm { compatible = "st,stm32-pwm"; + #pwm-cells = <3>; status = "disabled"; }; @@ -267,6 +271,7 @@ pwm { compatible = "st,stm32-pwm"; + #pwm-cells = <3>; status = "disabled"; }; @@ -288,6 +293,7 @@ pwm { compatible = "st,stm32-pwm"; + #pwm-cells = <3>; status = "disabled"; }; }; @@ -303,6 +309,7 @@ pwm { compatible = "st,stm32-pwm"; + #pwm-cells = <3>; status = "disabled"; }; }; @@ -311,7 +318,6 @@ compatible = "st,stm32-rtc"; reg = <0x40002800 0x400>; clocks = <&rcc 1 CLK_RTC>; - clock-names = "ck_rtc"; assigned-clocks = <&rcc 1 CLK_RTC>; assigned-clock-parents = <&rcc 1 CLK_LSE>; interrupt-parent = <&exti>; @@ -448,6 +454,7 @@ pwm { compatible = "st,stm32-pwm"; + #pwm-cells = <3>; status = "disabled"; }; @@ -469,6 +476,7 @@ pwm { compatible = "st,stm32-pwm"; + #pwm-cells = <3>; status = "disabled"; }; @@ -602,6 +610,7 @@ pwm { compatible = "st,stm32-pwm"; + #pwm-cells = <3>; status = "disabled"; }; @@ -623,6 +632,7 @@ pwm { compatible = "st,stm32-pwm"; + #pwm-cells = <3>; status = "disabled"; }; }; @@ -638,6 +648,7 @@ pwm { compatible = "st,stm32-pwm"; + #pwm-cells = <3>; status = "disabled"; }; }; @@ -777,7 +788,6 @@ rng: rng@50060800 { compatible = "st,stm32-rng"; reg = <0x50060800 0x400>; - interrupts = <80>; clocks = <&rcc 0 STM32F4_AHB2_CLOCK(RNG)>; }; diff --git a/arch/arm/boot/dts/stm32f469-disco.dts b/arch/arm/boot/dts/stm32f469-disco.dts index a3ff04940aec..9397db0c43de 100644 --- a/arch/arm/boot/dts/stm32f469-disco.dts +++ b/arch/arm/boot/dts/stm32f469-disco.dts @@ -60,7 +60,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@00000000 { device_type = "memory"; reg = <0x00000000 0x1000000>; }; @@ -76,6 +76,13 @@ regulator-max-microvolt = <3300000>; }; + vdd_dsi: vdd-dsi { + compatible = "regulator-fixed"; + regulator-name = "vdd_dsi"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + soc { dma-ranges = <0xc0000000 0x0 0x10000000>; }; @@ -155,6 +162,7 @@ compatible = "orisetech,otm8009a"; reg = <0>; /* dsi virtual channel (0..3) */ reset-gpios = <&gpioh 7 GPIO_ACTIVE_LOW>; + power-supply = <&vdd_dsi>; status = "okay"; port { @@ -166,7 +174,6 @@ }; <dc { - dma-ranges; status = "okay"; port { diff --git a/arch/arm/boot/dts/stm32f469.dtsi b/arch/arm/boot/dts/stm32f469.dtsi index 5ae5213f68cb..be002e8a78ac 100644 --- a/arch/arm/boot/dts/stm32f469.dtsi +++ b/arch/arm/boot/dts/stm32f469.dtsi @@ -8,7 +8,6 @@ dsi: dsi@40016c00 { compatible = "st,stm32-dsi"; reg = <0x40016c00 0x800>; - interrupts = <92>; resets = <&rcc STM32F4_APB2_RESET(DSI)>; reset-names = "apb"; clocks = <&rcc 1 CLK_F469_DSI>, <&clk_hse>; diff --git a/arch/arm/boot/dts/stm32f7-pinctrl.dtsi b/arch/arm/boot/dts/stm32f7-pinctrl.dtsi index 9314128df185..fe4cfda72a47 100644 --- a/arch/arm/boot/dts/stm32f7-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32f7-pinctrl.dtsi @@ -127,7 +127,7 @@ st,bank-name = "GPIOK"; }; - cec_pins_a: cec@0 { + cec_pins_a: cec-0 { pins { pinmux = <STM32_PINMUX('A', 15, AF4)>; /* HDMI CEC */ slew-rate = <0>; @@ -136,7 +136,7 @@ }; }; - usart1_pins_a: usart1@0 { + usart1_pins_a: usart1-0 { pins1 { pinmux = <STM32_PINMUX('A', 9, AF7)>; /* USART1_TX */ bias-disable; @@ -149,7 +149,7 @@ }; }; - usart1_pins_b: usart1@1 { + usart1_pins_b: usart1-1 { pins1 { pinmux = <STM32_PINMUX('A', 9, AF7)>; /* USART1_TX */ bias-disable; @@ -162,7 +162,7 @@ }; }; - i2c1_pins_b: i2c1@0 { + i2c1_pins_b: i2c1-0 { pins { pinmux = <STM32_PINMUX('B', 9, AF4)>, /* I2C1 SDA */ <STM32_PINMUX('B', 8, AF4)>; /* I2C1 SCL */ @@ -172,7 +172,7 @@ }; }; - usbotg_hs_pins_a: usbotg-hs@0 { + usbotg_hs_pins_a: usbotg-hs-0 { pins { pinmux = <STM32_PINMUX('H', 4, AF10)>, /* OTG_HS_ULPI_NXT */ <STM32_PINMUX('I', 11, AF10)>, /* OTG_HS_ULPI_DIR */ @@ -192,7 +192,7 @@ }; }; - usbotg_hs_pins_b: usbotg-hs@1 { + usbotg_hs_pins_b: usbotg-hs-1 { pins { pinmux = <STM32_PINMUX('H', 4, AF10)>, /* OTG_HS_ULPI_NXT */ <STM32_PINMUX('C', 2, AF10)>, /* OTG_HS_ULPI_DIR */ @@ -212,7 +212,7 @@ }; }; - usbotg_fs_pins_a: usbotg-fs@0 { + usbotg_fs_pins_a: usbotg-fs-0 { pins { pinmux = <STM32_PINMUX('A', 10, AF10)>, /* OTG_FS_ID */ <STM32_PINMUX('A', 11, AF10)>, /* OTG_FS_DM */ @@ -223,7 +223,7 @@ }; }; - sdio_pins_a: sdio_pins_a@0 { + sdio_pins_a: sdio-pins-a-0 { pins { pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1 D0 */ <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1 D1 */ @@ -236,7 +236,7 @@ }; }; - sdio_pins_od_a: sdio_pins_od_a@0 { + sdio_pins_od_a: sdio-pins-od-a-0 { pins1 { pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1 D0 */ <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1 D1 */ @@ -254,7 +254,7 @@ }; }; - sdio_pins_b: sdio_pins_b@0 { + sdio_pins_b: sdio-pins-b-0 { pins { pinmux = <STM32_PINMUX('G', 9, AF11)>, /* SDMMC2 D0 */ <STM32_PINMUX('G', 10, AF11)>, /* SDMMC2 D1 */ @@ -267,7 +267,7 @@ }; }; - sdio_pins_od_b: sdio_pins_od_b@0 { + sdio_pins_od_b: sdio-pins-od-b-0 { pins1 { pinmux = <STM32_PINMUX('G', 9, AF11)>, /* SDMMC2 D0 */ <STM32_PINMUX('G', 10, AF11)>, /* SDMMC2 D1 */ diff --git a/arch/arm/boot/dts/stm32f746-disco.dts b/arch/arm/boot/dts/stm32f746-disco.dts index 0ba9c5b08ab9..569d23cc61e5 100644 --- a/arch/arm/boot/dts/stm32f746-disco.dts +++ b/arch/arm/boot/dts/stm32f746-disco.dts @@ -55,7 +55,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@c0000000 { device_type = "memory"; reg = <0xC0000000 0x800000>; }; diff --git a/arch/arm/boot/dts/stm32f746.dtsi b/arch/arm/boot/dts/stm32f746.dtsi index a25b7000a3a1..93c063796780 100644 --- a/arch/arm/boot/dts/stm32f746.dtsi +++ b/arch/arm/boot/dts/stm32f746.dtsi @@ -94,6 +94,7 @@ pwm { compatible = "st,stm32-pwm"; + #pwm-cells = <3>; status = "disabled"; }; @@ -123,6 +124,7 @@ pwm { compatible = "st,stm32-pwm"; + #pwm-cells = <3>; status = "disabled"; }; @@ -152,6 +154,7 @@ pwm { compatible = "st,stm32-pwm"; + #pwm-cells = <3>; status = "disabled"; }; @@ -180,6 +183,7 @@ pwm { compatible = "st,stm32-pwm"; + #pwm-cells = <3>; status = "disabled"; }; @@ -249,6 +253,7 @@ pwm { compatible = "st,stm32-pwm"; + #pwm-cells = <3>; status = "disabled"; }; @@ -270,6 +275,7 @@ pwm { compatible = "st,stm32-pwm"; + #pwm-cells = <3>; status = "disabled"; }; }; @@ -285,6 +291,7 @@ pwm { compatible = "st,stm32-pwm"; + #pwm-cells = <3>; status = "disabled"; }; }; @@ -293,7 +300,6 @@ compatible = "st,stm32-rtc"; reg = <0x40002800 0x400>; clocks = <&rcc 1 CLK_RTC>; - clock-names = "ck_rtc"; assigned-clocks = <&rcc 1 CLK_RTC>; assigned-clock-parents = <&rcc 1 CLK_LSE>; interrupt-parent = <&exti>; @@ -419,6 +425,7 @@ pwm { compatible = "st,stm32-pwm"; + #pwm-cells = <3>; status = "disabled"; }; @@ -440,6 +447,7 @@ pwm { compatible = "st,stm32-pwm"; + #pwm-cells = <3>; status = "disabled"; }; @@ -512,6 +520,7 @@ pwm { compatible = "st,stm32-pwm"; + #pwm-cells = <3>; status = "disabled"; }; @@ -533,6 +542,7 @@ pwm { compatible = "st,stm32-pwm"; + #pwm-cells = <3>; status = "disabled"; }; }; @@ -548,6 +558,7 @@ pwm { compatible = "st,stm32-pwm"; + #pwm-cells = <3>; status = "disabled"; }; }; @@ -575,7 +586,7 @@ assigned-clock-rates = <1000000>; }; - dma1: dma@40026000 { + dma1: dma-controller@40026000 { compatible = "st,stm32-dma"; reg = <0x40026000 0x400>; interrupts = <11>, @@ -591,7 +602,7 @@ status = "disabled"; }; - dma2: dma@40026400 { + dma2: dma-controller@40026400 { compatible = "st,stm32-dma"; reg = <0x40026400 0x400>; interrupts = <56>, diff --git a/arch/arm/boot/dts/stm32f769-disco.dts b/arch/arm/boot/dts/stm32f769-disco.dts index 6f1d0ac8c31c..1626e00bb2cb 100644 --- a/arch/arm/boot/dts/stm32f769-disco.dts +++ b/arch/arm/boot/dts/stm32f769-disco.dts @@ -55,7 +55,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@c0000000 { device_type = "memory"; reg = <0xC0000000 0x1000000>; }; diff --git a/arch/arm/boot/dts/stm32h743.dtsi b/arch/arm/boot/dts/stm32h743.dtsi index c065266ee377..05eb02e6d083 100644 --- a/arch/arm/boot/dts/stm32h743.dtsi +++ b/arch/arm/boot/dts/stm32h743.dtsi @@ -231,7 +231,7 @@ status = "disabled"; }; - dma1: dma@40020000 { + dma1: dma-controller@40020000 { compatible = "st,stm32-dma"; reg = <0x40020000 0x400>; interrupts = <11>, @@ -249,7 +249,7 @@ status = "disabled"; }; - dma2: dma@40020400 { + dma2: dma-controller@40020400 { compatible = "st,stm32-dma"; reg = <0x40020400 0x400>; interrupts = <56>, @@ -329,7 +329,7 @@ status = "disabled"; }; - mdma1: dma@52000000 { + mdma1: dma-controller@52000000 { compatible = "st,stm32h7-mdma"; reg = <0x52000000 0x1000>; interrupts = <122>; diff --git a/arch/arm/boot/dts/stm32h743i-disco.dts b/arch/arm/boot/dts/stm32h743i-disco.dts index 3acd2e9c434e..e446d311c520 100644 --- a/arch/arm/boot/dts/stm32h743i-disco.dts +++ b/arch/arm/boot/dts/stm32h743i-disco.dts @@ -53,7 +53,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@d0000000 { device_type = "memory"; reg = <0xd0000000 0x2000000>; }; diff --git a/arch/arm/boot/dts/stm32h743i-eval.dts b/arch/arm/boot/dts/stm32h743i-eval.dts index ab78ad532375..8f398178f5e5 100644 --- a/arch/arm/boot/dts/stm32h743i-eval.dts +++ b/arch/arm/boot/dts/stm32h743i-eval.dts @@ -53,7 +53,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@d0000000 { device_type = "memory"; reg = <0xd0000000 0x2000000>; }; @@ -87,6 +87,7 @@ }; &adc_12 { + vdda-supply = <&vdda>; vref-supply = <&vdda>; status = "okay"; adc1: adc@0 { diff --git a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi new file mode 100644 index 000000000000..0237d4ddaa92 --- /dev/null +++ b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi @@ -0,0 +1,1092 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2017 - All Rights Reserved + * Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics. + */ +#include <dt-bindings/pinctrl/stm32-pinfunc.h> + +&pinctrl { + adc1_in6_pins_a: adc1-in6 { + pins { + pinmux = <STM32_PINMUX('F', 12, ANALOG)>; + }; + }; + + adc12_ain_pins_a: adc12-ain-0 { + pins { + pinmux = <STM32_PINMUX('C', 3, ANALOG)>, /* ADC1 in13 */ + <STM32_PINMUX('F', 12, ANALOG)>, /* ADC1 in6 */ + <STM32_PINMUX('F', 13, ANALOG)>, /* ADC2 in2 */ + <STM32_PINMUX('F', 14, ANALOG)>; /* ADC2 in6 */ + }; + }; + + adc12_usb_cc_pins_a: adc12-usb-cc-pins-0 { + pins { + pinmux = <STM32_PINMUX('A', 4, ANALOG)>, /* ADC12 in18 */ + <STM32_PINMUX('A', 5, ANALOG)>; /* ADC12 in19 */ + }; + }; + + cec_pins_a: cec-0 { + pins { + pinmux = <STM32_PINMUX('A', 15, AF4)>; + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + cec_pins_sleep_a: cec-sleep-0 { + pins { + pinmux = <STM32_PINMUX('A', 15, ANALOG)>; /* HDMI_CEC */ + }; + }; + + cec_pins_b: cec-1 { + pins { + pinmux = <STM32_PINMUX('B', 6, AF5)>; + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + cec_pins_sleep_b: cec-sleep-1 { + pins { + pinmux = <STM32_PINMUX('B', 6, ANALOG)>; /* HDMI_CEC */ + }; + }; + + dac_ch1_pins_a: dac-ch1 { + pins { + pinmux = <STM32_PINMUX('A', 4, ANALOG)>; + }; + }; + + dac_ch2_pins_a: dac-ch2 { + pins { + pinmux = <STM32_PINMUX('A', 5, ANALOG)>; + }; + }; + + dcmi_pins_a: dcmi-0 { + pins { + pinmux = <STM32_PINMUX('H', 8, AF13)>,/* DCMI_HSYNC */ + <STM32_PINMUX('B', 7, AF13)>,/* DCMI_VSYNC */ + <STM32_PINMUX('A', 6, AF13)>,/* DCMI_PIXCLK */ + <STM32_PINMUX('H', 9, AF13)>,/* DCMI_D0 */ + <STM32_PINMUX('H', 10, AF13)>,/* DCMI_D1 */ + <STM32_PINMUX('H', 11, AF13)>,/* DCMI_D2 */ + <STM32_PINMUX('H', 12, AF13)>,/* DCMI_D3 */ + <STM32_PINMUX('H', 14, AF13)>,/* DCMI_D4 */ + <STM32_PINMUX('I', 4, AF13)>,/* DCMI_D5 */ + <STM32_PINMUX('B', 8, AF13)>,/* DCMI_D6 */ + <STM32_PINMUX('E', 6, AF13)>,/* DCMI_D7 */ + <STM32_PINMUX('I', 1, AF13)>,/* DCMI_D8 */ + <STM32_PINMUX('H', 7, AF13)>,/* DCMI_D9 */ + <STM32_PINMUX('I', 3, AF13)>,/* DCMI_D10 */ + <STM32_PINMUX('H', 15, AF13)>;/* DCMI_D11 */ + bias-disable; + }; + }; + + dcmi_sleep_pins_a: dcmi-sleep-0 { + pins { + pinmux = <STM32_PINMUX('H', 8, ANALOG)>,/* DCMI_HSYNC */ + <STM32_PINMUX('B', 7, ANALOG)>,/* DCMI_VSYNC */ + <STM32_PINMUX('A', 6, ANALOG)>,/* DCMI_PIXCLK */ + <STM32_PINMUX('H', 9, ANALOG)>,/* DCMI_D0 */ + <STM32_PINMUX('H', 10, ANALOG)>,/* DCMI_D1 */ + <STM32_PINMUX('H', 11, ANALOG)>,/* DCMI_D2 */ + <STM32_PINMUX('H', 12, ANALOG)>,/* DCMI_D3 */ + <STM32_PINMUX('H', 14, ANALOG)>,/* DCMI_D4 */ + <STM32_PINMUX('I', 4, ANALOG)>,/* DCMI_D5 */ + <STM32_PINMUX('B', 8, ANALOG)>,/* DCMI_D6 */ + <STM32_PINMUX('E', 6, ANALOG)>,/* DCMI_D7 */ + <STM32_PINMUX('I', 1, ANALOG)>,/* DCMI_D8 */ + <STM32_PINMUX('H', 7, ANALOG)>,/* DCMI_D9 */ + <STM32_PINMUX('I', 3, ANALOG)>,/* DCMI_D10 */ + <STM32_PINMUX('H', 15, ANALOG)>;/* DCMI_D11 */ + }; + }; + + ethernet0_rgmii_pins_a: rgmii-0 { + pins1 { + pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */ + <STM32_PINMUX('G', 4, AF11)>, /* ETH_RGMII_GTX_CLK */ + <STM32_PINMUX('G', 13, AF11)>, /* ETH_RGMII_TXD0 */ + <STM32_PINMUX('G', 14, AF11)>, /* ETH_RGMII_TXD1 */ + <STM32_PINMUX('C', 2, AF11)>, /* ETH_RGMII_TXD2 */ + <STM32_PINMUX('E', 2, AF11)>, /* ETH_RGMII_TXD3 */ + <STM32_PINMUX('B', 11, AF11)>, /* ETH_RGMII_TX_CTL */ + <STM32_PINMUX('C', 1, AF11)>; /* ETH_MDC */ + bias-disable; + drive-push-pull; + slew-rate = <2>; + }; + pins2 { + pinmux = <STM32_PINMUX('A', 2, AF11)>; /* ETH_MDIO */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins3 { + pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH_RGMII_RXD0 */ + <STM32_PINMUX('C', 5, AF11)>, /* ETH_RGMII_RXD1 */ + <STM32_PINMUX('B', 0, AF11)>, /* ETH_RGMII_RXD2 */ + <STM32_PINMUX('B', 1, AF11)>, /* ETH_RGMII_RXD3 */ + <STM32_PINMUX('A', 1, AF11)>, /* ETH_RGMII_RX_CLK */ + <STM32_PINMUX('A', 7, AF11)>; /* ETH_RGMII_RX_CTL */ + bias-disable; + }; + }; + + ethernet0_rgmii_pins_sleep_a: rgmii-sleep-0 { + pins1 { + pinmux = <STM32_PINMUX('G', 5, ANALOG)>, /* ETH_RGMII_CLK125 */ + <STM32_PINMUX('G', 4, ANALOG)>, /* ETH_RGMII_GTX_CLK */ + <STM32_PINMUX('G', 13, ANALOG)>, /* ETH_RGMII_TXD0 */ + <STM32_PINMUX('G', 14, ANALOG)>, /* ETH_RGMII_TXD1 */ + <STM32_PINMUX('C', 2, ANALOG)>, /* ETH_RGMII_TXD2 */ + <STM32_PINMUX('E', 2, ANALOG)>, /* ETH_RGMII_TXD3 */ + <STM32_PINMUX('B', 11, ANALOG)>, /* ETH_RGMII_TX_CTL */ + <STM32_PINMUX('A', 2, ANALOG)>, /* ETH_MDIO */ + <STM32_PINMUX('C', 1, ANALOG)>, /* ETH_MDC */ + <STM32_PINMUX('C', 4, ANALOG)>, /* ETH_RGMII_RXD0 */ + <STM32_PINMUX('C', 5, ANALOG)>, /* ETH_RGMII_RXD1 */ + <STM32_PINMUX('B', 0, ANALOG)>, /* ETH_RGMII_RXD2 */ + <STM32_PINMUX('B', 1, ANALOG)>, /* ETH_RGMII_RXD3 */ + <STM32_PINMUX('A', 1, ANALOG)>, /* ETH_RGMII_RX_CLK */ + <STM32_PINMUX('A', 7, ANALOG)>; /* ETH_RGMII_RX_CTL */ + }; + }; + + fmc_pins_a: fmc-0 { + pins1 { + pinmux = <STM32_PINMUX('D', 4, AF12)>, /* FMC_NOE */ + <STM32_PINMUX('D', 5, AF12)>, /* FMC_NWE */ + <STM32_PINMUX('D', 11, AF12)>, /* FMC_A16_FMC_CLE */ + <STM32_PINMUX('D', 12, AF12)>, /* FMC_A17_FMC_ALE */ + <STM32_PINMUX('D', 14, AF12)>, /* FMC_D0 */ + <STM32_PINMUX('D', 15, AF12)>, /* FMC_D1 */ + <STM32_PINMUX('D', 0, AF12)>, /* FMC_D2 */ + <STM32_PINMUX('D', 1, AF12)>, /* FMC_D3 */ + <STM32_PINMUX('E', 7, AF12)>, /* FMC_D4 */ + <STM32_PINMUX('E', 8, AF12)>, /* FMC_D5 */ + <STM32_PINMUX('E', 9, AF12)>, /* FMC_D6 */ + <STM32_PINMUX('E', 10, AF12)>, /* FMC_D7 */ + <STM32_PINMUX('G', 9, AF12)>; /* FMC_NE2_FMC_NCE */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + pins2 { + pinmux = <STM32_PINMUX('D', 6, AF12)>; /* FMC_NWAIT */ + bias-pull-up; + }; + }; + + fmc_sleep_pins_a: fmc-sleep-0 { + pins { + pinmux = <STM32_PINMUX('D', 4, ANALOG)>, /* FMC_NOE */ + <STM32_PINMUX('D', 5, ANALOG)>, /* FMC_NWE */ + <STM32_PINMUX('D', 11, ANALOG)>, /* FMC_A16_FMC_CLE */ + <STM32_PINMUX('D', 12, ANALOG)>, /* FMC_A17_FMC_ALE */ + <STM32_PINMUX('D', 14, ANALOG)>, /* FMC_D0 */ + <STM32_PINMUX('D', 15, ANALOG)>, /* FMC_D1 */ + <STM32_PINMUX('D', 0, ANALOG)>, /* FMC_D2 */ + <STM32_PINMUX('D', 1, ANALOG)>, /* FMC_D3 */ + <STM32_PINMUX('E', 7, ANALOG)>, /* FMC_D4 */ + <STM32_PINMUX('E', 8, ANALOG)>, /* FMC_D5 */ + <STM32_PINMUX('E', 9, ANALOG)>, /* FMC_D6 */ + <STM32_PINMUX('E', 10, ANALOG)>, /* FMC_D7 */ + <STM32_PINMUX('D', 6, ANALOG)>, /* FMC_NWAIT */ + <STM32_PINMUX('G', 9, ANALOG)>; /* FMC_NE2_FMC_NCE */ + }; + }; + + i2c1_pins_a: i2c1-0 { + pins { + pinmux = <STM32_PINMUX('D', 12, AF5)>, /* I2C1_SCL */ + <STM32_PINMUX('F', 15, AF5)>; /* I2C1_SDA */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + i2c1_pins_sleep_a: i2c1-1 { + pins { + pinmux = <STM32_PINMUX('D', 12, ANALOG)>, /* I2C1_SCL */ + <STM32_PINMUX('F', 15, ANALOG)>; /* I2C1_SDA */ + }; + }; + + i2c1_pins_b: i2c1-2 { + pins { + pinmux = <STM32_PINMUX('F', 14, AF5)>, /* I2C1_SCL */ + <STM32_PINMUX('F', 15, AF5)>; /* I2C1_SDA */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + i2c1_pins_sleep_b: i2c1-3 { + pins { + pinmux = <STM32_PINMUX('F', 14, ANALOG)>, /* I2C1_SCL */ + <STM32_PINMUX('F', 15, ANALOG)>; /* I2C1_SDA */ + }; + }; + + i2c2_pins_a: i2c2-0 { + pins { + pinmux = <STM32_PINMUX('H', 4, AF4)>, /* I2C2_SCL */ + <STM32_PINMUX('H', 5, AF4)>; /* I2C2_SDA */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + i2c2_pins_sleep_a: i2c2-1 { + pins { + pinmux = <STM32_PINMUX('H', 4, ANALOG)>, /* I2C2_SCL */ + <STM32_PINMUX('H', 5, ANALOG)>; /* I2C2_SDA */ + }; + }; + + i2c2_pins_b1: i2c2-2 { + pins { + pinmux = <STM32_PINMUX('H', 5, AF4)>; /* I2C2_SDA */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + i2c2_pins_sleep_b1: i2c2-3 { + pins { + pinmux = <STM32_PINMUX('H', 5, ANALOG)>; /* I2C2_SDA */ + }; + }; + + i2c5_pins_a: i2c5-0 { + pins { + pinmux = <STM32_PINMUX('A', 11, AF4)>, /* I2C5_SCL */ + <STM32_PINMUX('A', 12, AF4)>; /* I2C5_SDA */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + i2c5_pins_sleep_a: i2c5-1 { + pins { + pinmux = <STM32_PINMUX('A', 11, ANALOG)>, /* I2C5_SCL */ + <STM32_PINMUX('A', 12, ANALOG)>; /* I2C5_SDA */ + + }; + }; + + i2s2_pins_a: i2s2-0 { + pins { + pinmux = <STM32_PINMUX('I', 3, AF5)>, /* I2S2_SDO */ + <STM32_PINMUX('B', 9, AF5)>, /* I2S2_WS */ + <STM32_PINMUX('A', 9, AF5)>; /* I2S2_CK */ + slew-rate = <1>; + drive-push-pull; + bias-disable; + }; + }; + + i2s2_pins_sleep_a: i2s2-1 { + pins { + pinmux = <STM32_PINMUX('I', 3, ANALOG)>, /* I2S2_SDO */ + <STM32_PINMUX('B', 9, ANALOG)>, /* I2S2_WS */ + <STM32_PINMUX('A', 9, ANALOG)>; /* I2S2_CK */ + }; + }; + + ltdc_pins_a: ltdc-a-0 { + pins { + pinmux = <STM32_PINMUX('G', 7, AF14)>, /* LCD_CLK */ + <STM32_PINMUX('I', 10, AF14)>, /* LCD_HSYNC */ + <STM32_PINMUX('I', 9, AF14)>, /* LCD_VSYNC */ + <STM32_PINMUX('F', 10, AF14)>, /* LCD_DE */ + <STM32_PINMUX('H', 2, AF14)>, /* LCD_R0 */ + <STM32_PINMUX('H', 3, AF14)>, /* LCD_R1 */ + <STM32_PINMUX('H', 8, AF14)>, /* LCD_R2 */ + <STM32_PINMUX('H', 9, AF14)>, /* LCD_R3 */ + <STM32_PINMUX('H', 10, AF14)>, /* LCD_R4 */ + <STM32_PINMUX('C', 0, AF14)>, /* LCD_R5 */ + <STM32_PINMUX('H', 12, AF14)>, /* LCD_R6 */ + <STM32_PINMUX('E', 15, AF14)>, /* LCD_R7 */ + <STM32_PINMUX('E', 5, AF14)>, /* LCD_G0 */ + <STM32_PINMUX('E', 6, AF14)>, /* LCD_G1 */ + <STM32_PINMUX('H', 13, AF14)>, /* LCD_G2 */ + <STM32_PINMUX('H', 14, AF14)>, /* LCD_G3 */ + <STM32_PINMUX('H', 15, AF14)>, /* LCD_G4 */ + <STM32_PINMUX('I', 0, AF14)>, /* LCD_G5 */ + <STM32_PINMUX('I', 1, AF14)>, /* LCD_G6 */ + <STM32_PINMUX('I', 2, AF14)>, /* LCD_G7 */ + <STM32_PINMUX('D', 9, AF14)>, /* LCD_B0 */ + <STM32_PINMUX('G', 12, AF14)>, /* LCD_B1 */ + <STM32_PINMUX('G', 10, AF14)>, /* LCD_B2 */ + <STM32_PINMUX('D', 10, AF14)>, /* LCD_B3 */ + <STM32_PINMUX('I', 4, AF14)>, /* LCD_B4 */ + <STM32_PINMUX('A', 3, AF14)>, /* LCD_B5 */ + <STM32_PINMUX('B', 8, AF14)>, /* LCD_B6 */ + <STM32_PINMUX('D', 8, AF14)>; /* LCD_B7 */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + }; + + ltdc_pins_sleep_a: ltdc-a-1 { + pins { + pinmux = <STM32_PINMUX('G', 7, ANALOG)>, /* LCD_CLK */ + <STM32_PINMUX('I', 10, ANALOG)>, /* LCD_HSYNC */ + <STM32_PINMUX('I', 9, ANALOG)>, /* LCD_VSYNC */ + <STM32_PINMUX('F', 10, ANALOG)>, /* LCD_DE */ + <STM32_PINMUX('H', 2, ANALOG)>, /* LCD_R0 */ + <STM32_PINMUX('H', 3, ANALOG)>, /* LCD_R1 */ + <STM32_PINMUX('H', 8, ANALOG)>, /* LCD_R2 */ + <STM32_PINMUX('H', 9, ANALOG)>, /* LCD_R3 */ + <STM32_PINMUX('H', 10, ANALOG)>, /* LCD_R4 */ + <STM32_PINMUX('C', 0, ANALOG)>, /* LCD_R5 */ + <STM32_PINMUX('H', 12, ANALOG)>, /* LCD_R6 */ + <STM32_PINMUX('E', 15, ANALOG)>, /* LCD_R7 */ + <STM32_PINMUX('E', 5, ANALOG)>, /* LCD_G0 */ + <STM32_PINMUX('E', 6, ANALOG)>, /* LCD_G1 */ + <STM32_PINMUX('H', 13, ANALOG)>, /* LCD_G2 */ + <STM32_PINMUX('H', 14, ANALOG)>, /* LCD_G3 */ + <STM32_PINMUX('H', 15, ANALOG)>, /* LCD_G4 */ + <STM32_PINMUX('I', 0, ANALOG)>, /* LCD_G5 */ + <STM32_PINMUX('I', 1, ANALOG)>, /* LCD_G6 */ + <STM32_PINMUX('I', 2, ANALOG)>, /* LCD_G7 */ + <STM32_PINMUX('D', 9, ANALOG)>, /* LCD_B0 */ + <STM32_PINMUX('G', 12, ANALOG)>, /* LCD_B1 */ + <STM32_PINMUX('G', 10, ANALOG)>, /* LCD_B2 */ + <STM32_PINMUX('D', 10, ANALOG)>, /* LCD_B3 */ + <STM32_PINMUX('I', 4, ANALOG)>, /* LCD_B4 */ + <STM32_PINMUX('A', 3, ANALOG)>, /* LCD_B5 */ + <STM32_PINMUX('B', 8, ANALOG)>, /* LCD_B6 */ + <STM32_PINMUX('D', 8, ANALOG)>; /* LCD_B7 */ + }; + }; + + ltdc_pins_b: ltdc-b-0 { + pins { + pinmux = <STM32_PINMUX('I', 14, AF14)>, /* LCD_CLK */ + <STM32_PINMUX('I', 12, AF14)>, /* LCD_HSYNC */ + <STM32_PINMUX('I', 13, AF14)>, /* LCD_VSYNC */ + <STM32_PINMUX('K', 7, AF14)>, /* LCD_DE */ + <STM32_PINMUX('I', 15, AF14)>, /* LCD_R0 */ + <STM32_PINMUX('J', 0, AF14)>, /* LCD_R1 */ + <STM32_PINMUX('J', 1, AF14)>, /* LCD_R2 */ + <STM32_PINMUX('J', 2, AF14)>, /* LCD_R3 */ + <STM32_PINMUX('J', 3, AF14)>, /* LCD_R4 */ + <STM32_PINMUX('J', 4, AF14)>, /* LCD_R5 */ + <STM32_PINMUX('J', 5, AF14)>, /* LCD_R6 */ + <STM32_PINMUX('J', 6, AF14)>, /* LCD_R7 */ + <STM32_PINMUX('J', 7, AF14)>, /* LCD_G0 */ + <STM32_PINMUX('J', 8, AF14)>, /* LCD_G1 */ + <STM32_PINMUX('J', 9, AF14)>, /* LCD_G2 */ + <STM32_PINMUX('J', 10, AF14)>, /* LCD_G3 */ + <STM32_PINMUX('J', 11, AF14)>, /* LCD_G4 */ + <STM32_PINMUX('K', 0, AF14)>, /* LCD_G5 */ + <STM32_PINMUX('K', 1, AF14)>, /* LCD_G6 */ + <STM32_PINMUX('K', 2, AF14)>, /* LCD_G7 */ + <STM32_PINMUX('J', 12, AF14)>, /* LCD_B0 */ + <STM32_PINMUX('J', 13, AF14)>, /* LCD_B1 */ + <STM32_PINMUX('J', 14, AF14)>, /* LCD_B2 */ + <STM32_PINMUX('J', 15, AF14)>, /* LCD_B3 */ + <STM32_PINMUX('K', 3, AF14)>, /* LCD_B4 */ + <STM32_PINMUX('K', 4, AF14)>, /* LCD_B5 */ + <STM32_PINMUX('K', 5, AF14)>, /* LCD_B6 */ + <STM32_PINMUX('K', 6, AF14)>; /* LCD_B7 */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + }; + + ltdc_pins_sleep_b: ltdc-b-1 { + pins { + pinmux = <STM32_PINMUX('I', 14, ANALOG)>, /* LCD_CLK */ + <STM32_PINMUX('I', 12, ANALOG)>, /* LCD_HSYNC */ + <STM32_PINMUX('I', 13, ANALOG)>, /* LCD_VSYNC */ + <STM32_PINMUX('K', 7, ANALOG)>, /* LCD_DE */ + <STM32_PINMUX('I', 15, ANALOG)>, /* LCD_R0 */ + <STM32_PINMUX('J', 0, ANALOG)>, /* LCD_R1 */ + <STM32_PINMUX('J', 1, ANALOG)>, /* LCD_R2 */ + <STM32_PINMUX('J', 2, ANALOG)>, /* LCD_R3 */ + <STM32_PINMUX('J', 3, ANALOG)>, /* LCD_R4 */ + <STM32_PINMUX('J', 4, ANALOG)>, /* LCD_R5 */ + <STM32_PINMUX('J', 5, ANALOG)>, /* LCD_R6 */ + <STM32_PINMUX('J', 6, ANALOG)>, /* LCD_R7 */ + <STM32_PINMUX('J', 7, ANALOG)>, /* LCD_G0 */ + <STM32_PINMUX('J', 8, ANALOG)>, /* LCD_G1 */ + <STM32_PINMUX('J', 9, ANALOG)>, /* LCD_G2 */ + <STM32_PINMUX('J', 10, ANALOG)>, /* LCD_G3 */ + <STM32_PINMUX('J', 11, ANALOG)>, /* LCD_G4 */ + <STM32_PINMUX('K', 0, ANALOG)>, /* LCD_G5 */ + <STM32_PINMUX('K', 1, ANALOG)>, /* LCD_G6 */ + <STM32_PINMUX('K', 2, ANALOG)>, /* LCD_G7 */ + <STM32_PINMUX('J', 12, ANALOG)>, /* LCD_B0 */ + <STM32_PINMUX('J', 13, ANALOG)>, /* LCD_B1 */ + <STM32_PINMUX('J', 14, ANALOG)>, /* LCD_B2 */ + <STM32_PINMUX('J', 15, ANALOG)>, /* LCD_B3 */ + <STM32_PINMUX('K', 3, ANALOG)>, /* LCD_B4 */ + <STM32_PINMUX('K', 4, ANALOG)>, /* LCD_B5 */ + <STM32_PINMUX('K', 5, ANALOG)>, /* LCD_B6 */ + <STM32_PINMUX('K', 6, ANALOG)>; /* LCD_B7 */ + }; + }; + + m_can1_pins_a: m-can1-0 { + pins1 { + pinmux = <STM32_PINMUX('H', 13, AF9)>; /* CAN1_TX */ + slew-rate = <1>; + drive-push-pull; + bias-disable; + }; + pins2 { + pinmux = <STM32_PINMUX('I', 9, AF9)>; /* CAN1_RX */ + bias-disable; + }; + }; + + m_can1_sleep_pins_a: m_can1-sleep-0 { + pins { + pinmux = <STM32_PINMUX('H', 13, ANALOG)>, /* CAN1_TX */ + <STM32_PINMUX('I', 9, ANALOG)>; /* CAN1_RX */ + }; + }; + + pwm1_pins_a: pwm1-0 { + pins { + pinmux = <STM32_PINMUX('E', 9, AF1)>, /* TIM1_CH1 */ + <STM32_PINMUX('E', 11, AF1)>, /* TIM1_CH2 */ + <STM32_PINMUX('E', 14, AF1)>; /* TIM1_CH4 */ + bias-pull-down; + drive-push-pull; + slew-rate = <0>; + }; + }; + + pwm1_sleep_pins_a: pwm1-sleep-0 { + pins { + pinmux = <STM32_PINMUX('E', 9, ANALOG)>, /* TIM1_CH1 */ + <STM32_PINMUX('E', 11, ANALOG)>, /* TIM1_CH2 */ + <STM32_PINMUX('E', 14, ANALOG)>; /* TIM1_CH4 */ + }; + }; + + pwm2_pins_a: pwm2-0 { + pins { + pinmux = <STM32_PINMUX('A', 3, AF1)>; /* TIM2_CH4 */ + bias-pull-down; + drive-push-pull; + slew-rate = <0>; + }; + }; + + pwm2_sleep_pins_a: pwm2-sleep-0 { + pins { + pinmux = <STM32_PINMUX('A', 3, ANALOG)>; /* TIM2_CH4 */ + }; + }; + + pwm3_pins_a: pwm3-0 { + pins { + pinmux = <STM32_PINMUX('C', 7, AF2)>; /* TIM3_CH2 */ + bias-pull-down; + drive-push-pull; + slew-rate = <0>; + }; + }; + + pwm3_sleep_pins_a: pwm3-sleep-0 { + pins { + pinmux = <STM32_PINMUX('C', 7, ANALOG)>; /* TIM3_CH2 */ + }; + }; + + pwm4_pins_a: pwm4-0 { + pins { + pinmux = <STM32_PINMUX('D', 14, AF2)>, /* TIM4_CH3 */ + <STM32_PINMUX('D', 15, AF2)>; /* TIM4_CH4 */ + bias-pull-down; + drive-push-pull; + slew-rate = <0>; + }; + }; + + pwm4_sleep_pins_a: pwm4-sleep-0 { + pins { + pinmux = <STM32_PINMUX('D', 14, ANALOG)>, /* TIM4_CH3 */ + <STM32_PINMUX('D', 15, ANALOG)>; /* TIM4_CH4 */ + }; + }; + + pwm4_pins_b: pwm4-1 { + pins { + pinmux = <STM32_PINMUX('D', 13, AF2)>; /* TIM4_CH2 */ + bias-pull-down; + drive-push-pull; + slew-rate = <0>; + }; + }; + + pwm4_sleep_pins_b: pwm4-sleep-1 { + pins { + pinmux = <STM32_PINMUX('D', 13, ANALOG)>; /* TIM4_CH2 */ + }; + }; + + pwm5_pins_a: pwm5-0 { + pins { + pinmux = <STM32_PINMUX('H', 11, AF2)>; /* TIM5_CH2 */ + bias-pull-down; + drive-push-pull; + slew-rate = <0>; + }; + }; + + pwm5_sleep_pins_a: pwm5-sleep-0 { + pins { + pinmux = <STM32_PINMUX('H', 11, ANALOG)>; /* TIM5_CH2 */ + }; + }; + + pwm8_pins_a: pwm8-0 { + pins { + pinmux = <STM32_PINMUX('I', 2, AF3)>; /* TIM8_CH4 */ + bias-pull-down; + drive-push-pull; + slew-rate = <0>; + }; + }; + + pwm8_sleep_pins_a: pwm8-sleep-0 { + pins { + pinmux = <STM32_PINMUX('I', 2, ANALOG)>; /* TIM8_CH4 */ + }; + }; + + pwm12_pins_a: pwm12-0 { + pins { + pinmux = <STM32_PINMUX('H', 6, AF2)>; /* TIM12_CH1 */ + bias-pull-down; + drive-push-pull; + slew-rate = <0>; + }; + }; + + pwm12_sleep_pins_a: pwm12-sleep-0 { + pins { + pinmux = <STM32_PINMUX('H', 6, ANALOG)>; /* TIM12_CH1 */ + }; + }; + + qspi_clk_pins_a: qspi-clk-0 { + pins { + pinmux = <STM32_PINMUX('F', 10, AF9)>; /* QSPI_CLK */ + bias-disable; + drive-push-pull; + slew-rate = <3>; + }; + }; + + qspi_clk_sleep_pins_a: qspi-clk-sleep-0 { + pins { + pinmux = <STM32_PINMUX('F', 10, ANALOG)>; /* QSPI_CLK */ + }; + }; + + qspi_bk1_pins_a: qspi-bk1-0 { + pins1 { + pinmux = <STM32_PINMUX('F', 8, AF10)>, /* QSPI_BK1_IO0 */ + <STM32_PINMUX('F', 9, AF10)>, /* QSPI_BK1_IO1 */ + <STM32_PINMUX('F', 7, AF9)>, /* QSPI_BK1_IO2 */ + <STM32_PINMUX('F', 6, AF9)>; /* QSPI_BK1_IO3 */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + pins2 { + pinmux = <STM32_PINMUX('B', 6, AF10)>; /* QSPI_BK1_NCS */ + bias-pull-up; + drive-push-pull; + slew-rate = <1>; + }; + }; + + qspi_bk1_sleep_pins_a: qspi-bk1-sleep-0 { + pins { + pinmux = <STM32_PINMUX('F', 8, ANALOG)>, /* QSPI_BK1_IO0 */ + <STM32_PINMUX('F', 9, ANALOG)>, /* QSPI_BK1_IO1 */ + <STM32_PINMUX('F', 7, ANALOG)>, /* QSPI_BK1_IO2 */ + <STM32_PINMUX('F', 6, ANALOG)>, /* QSPI_BK1_IO3 */ + <STM32_PINMUX('B', 6, ANALOG)>; /* QSPI_BK1_NCS */ + }; + }; + + qspi_bk2_pins_a: qspi-bk2-0 { + pins1 { + pinmux = <STM32_PINMUX('H', 2, AF9)>, /* QSPI_BK2_IO0 */ + <STM32_PINMUX('H', 3, AF9)>, /* QSPI_BK2_IO1 */ + <STM32_PINMUX('G', 10, AF11)>, /* QSPI_BK2_IO2 */ + <STM32_PINMUX('G', 7, AF11)>; /* QSPI_BK2_IO3 */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + pins2 { + pinmux = <STM32_PINMUX('C', 0, AF10)>; /* QSPI_BK2_NCS */ + bias-pull-up; + drive-push-pull; + slew-rate = <1>; + }; + }; + + qspi_bk2_sleep_pins_a: qspi-bk2-sleep-0 { + pins { + pinmux = <STM32_PINMUX('H', 2, ANALOG)>, /* QSPI_BK2_IO0 */ + <STM32_PINMUX('H', 3, ANALOG)>, /* QSPI_BK2_IO1 */ + <STM32_PINMUX('G', 10, ANALOG)>, /* QSPI_BK2_IO2 */ + <STM32_PINMUX('G', 7, ANALOG)>, /* QSPI_BK2_IO3 */ + <STM32_PINMUX('C', 0, ANALOG)>; /* QSPI_BK2_NCS */ + }; + }; + + sai2a_pins_a: sai2a-0 { + pins { + pinmux = <STM32_PINMUX('I', 5, AF10)>, /* SAI2_SCK_A */ + <STM32_PINMUX('I', 6, AF10)>, /* SAI2_SD_A */ + <STM32_PINMUX('I', 7, AF10)>, /* SAI2_FS_A */ + <STM32_PINMUX('E', 0, AF10)>; /* SAI2_MCLK_A */ + slew-rate = <0>; + drive-push-pull; + bias-disable; + }; + }; + + sai2a_sleep_pins_a: sai2a-1 { + pins { + pinmux = <STM32_PINMUX('I', 5, ANALOG)>, /* SAI2_SCK_A */ + <STM32_PINMUX('I', 6, ANALOG)>, /* SAI2_SD_A */ + <STM32_PINMUX('I', 7, ANALOG)>, /* SAI2_FS_A */ + <STM32_PINMUX('E', 0, ANALOG)>; /* SAI2_MCLK_A */ + }; + }; + + sai2b_pins_a: sai2b-0 { + pins1 { + pinmux = <STM32_PINMUX('E', 12, AF10)>, /* SAI2_SCK_B */ + <STM32_PINMUX('E', 13, AF10)>, /* SAI2_FS_B */ + <STM32_PINMUX('E', 14, AF10)>; /* SAI2_MCLK_B */ + slew-rate = <0>; + drive-push-pull; + bias-disable; + }; + pins2 { + pinmux = <STM32_PINMUX('F', 11, AF10)>; /* SAI2_SD_B */ + bias-disable; + }; + }; + + sai2b_sleep_pins_a: sai2b-1 { + pins { + pinmux = <STM32_PINMUX('F', 11, ANALOG)>, /* SAI2_SD_B */ + <STM32_PINMUX('E', 12, ANALOG)>, /* SAI2_SCK_B */ + <STM32_PINMUX('E', 13, ANALOG)>, /* SAI2_FS_B */ + <STM32_PINMUX('E', 14, ANALOG)>; /* SAI2_MCLK_B */ + }; + }; + + sai2b_pins_b: sai2b-2 { + pins { + pinmux = <STM32_PINMUX('F', 11, AF10)>; /* SAI2_SD_B */ + bias-disable; + }; + }; + + sai2b_sleep_pins_b: sai2b-3 { + pins { + pinmux = <STM32_PINMUX('F', 11, ANALOG)>; /* SAI2_SD_B */ + }; + }; + + sai4a_pins_a: sai4a-0 { + pins { + pinmux = <STM32_PINMUX('B', 5, AF10)>; /* SAI4_SD_A */ + slew-rate = <0>; + drive-push-pull; + bias-disable; + }; + }; + + sai4a_sleep_pins_a: sai4a-1 { + pins { + pinmux = <STM32_PINMUX('B', 5, ANALOG)>; /* SAI4_SD_A */ + }; + }; + + sdmmc1_b4_pins_a: sdmmc1-b4-0 { + pins1 { + pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */ + <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */ + <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */ + <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */ + <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */ + slew-rate = <1>; + drive-push-pull; + bias-disable; + }; + pins2 { + pinmux = <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */ + slew-rate = <2>; + drive-push-pull; + bias-disable; + }; + }; + + sdmmc1_b4_od_pins_a: sdmmc1-b4-od-0 { + pins1 { + pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */ + <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */ + <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */ + <STM32_PINMUX('C', 11, AF12)>; /* SDMMC1_D3 */ + slew-rate = <1>; + drive-push-pull; + bias-disable; + }; + pins2 { + pinmux = <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */ + slew-rate = <2>; + drive-push-pull; + bias-disable; + }; + pins3 { + pinmux = <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */ + slew-rate = <1>; + drive-open-drain; + bias-disable; + }; + }; + + sdmmc1_b4_sleep_pins_a: sdmmc1-b4-sleep-0 { + pins { + pinmux = <STM32_PINMUX('C', 8, ANALOG)>, /* SDMMC1_D0 */ + <STM32_PINMUX('C', 9, ANALOG)>, /* SDMMC1_D1 */ + <STM32_PINMUX('C', 10, ANALOG)>, /* SDMMC1_D2 */ + <STM32_PINMUX('C', 11, ANALOG)>, /* SDMMC1_D3 */ + <STM32_PINMUX('C', 12, ANALOG)>, /* SDMMC1_CK */ + <STM32_PINMUX('D', 2, ANALOG)>; /* SDMMC1_CMD */ + }; + }; + + sdmmc1_dir_pins_a: sdmmc1-dir-0 { + pins1 { + pinmux = <STM32_PINMUX('F', 2, AF11)>, /* SDMMC1_D0DIR */ + <STM32_PINMUX('C', 7, AF8)>, /* SDMMC1_D123DIR */ + <STM32_PINMUX('B', 9, AF11)>; /* SDMMC1_CDIR */ + slew-rate = <1>; + drive-push-pull; + bias-pull-up; + }; + pins2{ + pinmux = <STM32_PINMUX('E', 4, AF8)>; /* SDMMC1_CKIN */ + bias-pull-up; + }; + }; + + sdmmc1_dir_sleep_pins_a: sdmmc1-dir-sleep-0 { + pins { + pinmux = <STM32_PINMUX('F', 2, ANALOG)>, /* SDMMC1_D0DIR */ + <STM32_PINMUX('C', 7, ANALOG)>, /* SDMMC1_D123DIR */ + <STM32_PINMUX('B', 9, ANALOG)>, /* SDMMC1_CDIR */ + <STM32_PINMUX('E', 4, ANALOG)>; /* SDMMC1_CKIN */ + }; + }; + + sdmmc2_b4_pins_a: sdmmc2-b4-0 { + pins1 { + pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */ + <STM32_PINMUX('B', 15, AF9)>, /* SDMMC2_D1 */ + <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */ + <STM32_PINMUX('B', 4, AF9)>, /* SDMMC2_D3 */ + <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */ + slew-rate = <1>; + drive-push-pull; + bias-pull-up; + }; + pins2 { + pinmux = <STM32_PINMUX('E', 3, AF9)>; /* SDMMC2_CK */ + slew-rate = <2>; + drive-push-pull; + bias-pull-up; + }; + }; + + sdmmc2_b4_od_pins_a: sdmmc2-b4-od-0 { + pins1 { + pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */ + <STM32_PINMUX('B', 15, AF9)>, /* SDMMC2_D1 */ + <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */ + <STM32_PINMUX('B', 4, AF9)>; /* SDMMC2_D3 */ + slew-rate = <1>; + drive-push-pull; + bias-pull-up; + }; + pins2 { + pinmux = <STM32_PINMUX('E', 3, AF9)>; /* SDMMC2_CK */ + slew-rate = <2>; + drive-push-pull; + bias-pull-up; + }; + pins3 { + pinmux = <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */ + slew-rate = <1>; + drive-open-drain; + bias-pull-up; + }; + }; + + sdmmc2_b4_sleep_pins_a: sdmmc2-b4-sleep-0 { + pins { + pinmux = <STM32_PINMUX('B', 14, ANALOG)>, /* SDMMC2_D0 */ + <STM32_PINMUX('B', 15, ANALOG)>, /* SDMMC2_D1 */ + <STM32_PINMUX('B', 3, ANALOG)>, /* SDMMC2_D2 */ + <STM32_PINMUX('B', 4, ANALOG)>, /* SDMMC2_D3 */ + <STM32_PINMUX('E', 3, ANALOG)>, /* SDMMC2_CK */ + <STM32_PINMUX('G', 6, ANALOG)>; /* SDMMC2_CMD */ + }; + }; + + sdmmc2_b4_pins_b: sdmmc2-b4-1 { + pins1 { + pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */ + <STM32_PINMUX('B', 15, AF9)>, /* SDMMC2_D1 */ + <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */ + <STM32_PINMUX('B', 4, AF9)>, /* SDMMC2_D3 */ + <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */ + slew-rate = <1>; + drive-push-pull; + bias-disable; + }; + pins2 { + pinmux = <STM32_PINMUX('E', 3, AF9)>; /* SDMMC2_CK */ + slew-rate = <2>; + drive-push-pull; + bias-disable; + }; + }; + + sdmmc2_b4_od_pins_b: sdmmc2-b4-od-1 { + pins1 { + pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */ + <STM32_PINMUX('B', 15, AF9)>, /* SDMMC2_D1 */ + <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */ + <STM32_PINMUX('B', 4, AF9)>; /* SDMMC2_D3 */ + slew-rate = <1>; + drive-push-pull; + bias-disable; + }; + pins2 { + pinmux = <STM32_PINMUX('E', 3, AF9)>; /* SDMMC2_CK */ + slew-rate = <2>; + drive-push-pull; + bias-disable; + }; + pins3 { + pinmux = <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */ + slew-rate = <1>; + drive-open-drain; + bias-disable; + }; + }; + + sdmmc2_d47_pins_a: sdmmc2-d47-0 { + pins { + pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */ + <STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */ + <STM32_PINMUX('E', 5, AF9)>, /* SDMMC2_D6 */ + <STM32_PINMUX('D', 3, AF9)>; /* SDMMC2_D7 */ + slew-rate = <1>; + drive-push-pull; + bias-pull-up; + }; + }; + + sdmmc2_d47_sleep_pins_a: sdmmc2-d47-sleep-0 { + pins { + pinmux = <STM32_PINMUX('A', 8, ANALOG)>, /* SDMMC2_D4 */ + <STM32_PINMUX('A', 9, ANALOG)>, /* SDMMC2_D5 */ + <STM32_PINMUX('E', 5, ANALOG)>, /* SDMMC2_D6 */ + <STM32_PINMUX('D', 3, ANALOG)>; /* SDMMC2_D7 */ + }; + }; + + sdmmc3_b4_pins_a: sdmmc3-b4-0 { + pins1 { + pinmux = <STM32_PINMUX('F', 0, AF9)>, /* SDMMC3_D0 */ + <STM32_PINMUX('F', 4, AF9)>, /* SDMMC3_D1 */ + <STM32_PINMUX('F', 5, AF9)>, /* SDMMC3_D2 */ + <STM32_PINMUX('D', 7, AF10)>, /* SDMMC3_D3 */ + <STM32_PINMUX('F', 1, AF9)>; /* SDMMC3_CMD */ + slew-rate = <1>; + drive-push-pull; + bias-pull-up; + }; + pins2 { + pinmux = <STM32_PINMUX('G', 15, AF10)>; /* SDMMC3_CK */ + slew-rate = <2>; + drive-push-pull; + bias-pull-up; + }; + }; + + sdmmc3_b4_od_pins_a: sdmmc3-b4-od-0 { + pins1 { + pinmux = <STM32_PINMUX('F', 0, AF9)>, /* SDMMC3_D0 */ + <STM32_PINMUX('F', 4, AF9)>, /* SDMMC3_D1 */ + <STM32_PINMUX('F', 5, AF9)>, /* SDMMC3_D2 */ + <STM32_PINMUX('D', 7, AF10)>; /* SDMMC3_D3 */ + slew-rate = <1>; + drive-push-pull; + bias-pull-up; + }; + pins2 { + pinmux = <STM32_PINMUX('G', 15, AF10)>; /* SDMMC3_CK */ + slew-rate = <2>; + drive-push-pull; + bias-pull-up; + }; + pins3 { + pinmux = <STM32_PINMUX('F', 1, AF9)>; /* SDMMC2_CMD */ + slew-rate = <1>; + drive-open-drain; + bias-pull-up; + }; + }; + + sdmmc3_b4_sleep_pins_a: sdmmc3-b4-sleep-0 { + pins { + pinmux = <STM32_PINMUX('F', 0, ANALOG)>, /* SDMMC3_D0 */ + <STM32_PINMUX('F', 4, ANALOG)>, /* SDMMC3_D1 */ + <STM32_PINMUX('F', 5, ANALOG)>, /* SDMMC3_D2 */ + <STM32_PINMUX('D', 7, ANALOG)>, /* SDMMC3_D3 */ + <STM32_PINMUX('G', 15, ANALOG)>, /* SDMMC3_CK */ + <STM32_PINMUX('F', 1, ANALOG)>; /* SDMMC3_CMD */ + }; + }; + + spdifrx_pins_a: spdifrx-0 { + pins { + pinmux = <STM32_PINMUX('G', 12, AF8)>; /* SPDIF_IN1 */ + bias-disable; + }; + }; + + spdifrx_sleep_pins_a: spdifrx-1 { + pins { + pinmux = <STM32_PINMUX('G', 12, ANALOG)>; /* SPDIF_IN1 */ + }; + }; + + uart4_pins_a: uart4-0 { + pins1 { + pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */ + bias-disable; + }; + }; + + uart4_pins_b: uart4-1 { + pins1 { + pinmux = <STM32_PINMUX('D', 1, AF8)>; /* UART4_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */ + bias-disable; + }; + }; + + uart7_pins_a: uart7-0 { + pins1 { + pinmux = <STM32_PINMUX('E', 8, AF7)>; /* UART4_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('E', 7, AF7)>, /* UART4_RX */ + <STM32_PINMUX('E', 10, AF7)>, /* UART4_CTS */ + <STM32_PINMUX('E', 9, AF7)>; /* UART4_RTS */ + bias-disable; + }; + }; +}; + +&pinctrl_z { + i2c2_pins_b2: i2c2-0 { + pins { + pinmux = <STM32_PINMUX('Z', 0, AF3)>; /* I2C2_SCL */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + i2c2_pins_sleep_b2: i2c2-1 { + pins { + pinmux = <STM32_PINMUX('Z', 0, ANALOG)>; /* I2C2_SCL */ + }; + }; + + i2c4_pins_a: i2c4-0 { + pins { + pinmux = <STM32_PINMUX('Z', 4, AF6)>, /* I2C4_SCL */ + <STM32_PINMUX('Z', 5, AF6)>; /* I2C4_SDA */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + i2c4_pins_sleep_a: i2c4-1 { + pins { + pinmux = <STM32_PINMUX('Z', 4, ANALOG)>, /* I2C4_SCL */ + <STM32_PINMUX('Z', 5, ANALOG)>; /* I2C4_SDA */ + }; + }; + + spi1_pins_a: spi1-0 { + pins1 { + pinmux = <STM32_PINMUX('Z', 0, AF5)>, /* SPI1_SCK */ + <STM32_PINMUX('Z', 2, AF5)>; /* SPI1_MOSI */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + + pins2 { + pinmux = <STM32_PINMUX('Z', 1, AF5)>; /* SPI1_MISO */ + bias-disable; + }; + }; +}; diff --git a/arch/arm/boot/dts/stm32mp157c.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi index 0c4e6ebc3529..fb41d0778b00 100644 --- a/arch/arm/boot/dts/stm32mp157c.dtsi +++ b/arch/arm/boot/dts/stm32mp151.dtsi @@ -20,12 +20,6 @@ device_type = "cpu"; reg = <0>; }; - - cpu1: cpu@1 { - compatible = "arm,cortex-a7"; - device_type = "cpu"; - reg = <1>; - }; }; psci { @@ -109,6 +103,12 @@ }; }; + booster: regulator-booster { + compatible = "st,stm32mp1-booster"; + st,syscfg = <&syscfg>; + status = "disabled"; + }; + soc { compatible = "simple-bus"; #address-cells = <1>; @@ -133,6 +133,7 @@ pwm { compatible = "st,stm32-pwm"; + #pwm-cells = <3>; status = "disabled"; }; @@ -141,6 +142,11 @@ reg = <1>; status = "disabled"; }; + + counter { + compatible = "st,stm32-timer-counter"; + status = "disabled"; + }; }; timers3: timer@40001000 { @@ -161,6 +167,7 @@ pwm { compatible = "st,stm32-pwm"; + #pwm-cells = <3>; status = "disabled"; }; @@ -169,6 +176,11 @@ reg = <2>; status = "disabled"; }; + + counter { + compatible = "st,stm32-timer-counter"; + status = "disabled"; + }; }; timers4: timer@40002000 { @@ -187,6 +199,7 @@ pwm { compatible = "st,stm32-pwm"; + #pwm-cells = <3>; status = "disabled"; }; @@ -195,6 +208,11 @@ reg = <3>; status = "disabled"; }; + + counter { + compatible = "st,stm32-timer-counter"; + status = "disabled"; + }; }; timers5: timer@40003000 { @@ -215,6 +233,7 @@ pwm { compatible = "st,stm32-pwm"; + #pwm-cells = <3>; status = "disabled"; }; @@ -223,6 +242,11 @@ reg = <4>; status = "disabled"; }; + + counter { + compatible = "st,stm32-timer-counter"; + status = "disabled"; + }; }; timers6: timer@40004000 { @@ -272,6 +296,7 @@ pwm { compatible = "st,stm32-pwm"; + #pwm-cells = <3>; status = "disabled"; }; @@ -293,6 +318,7 @@ pwm { compatible = "st,stm32-pwm"; + #pwm-cells = <3>; status = "disabled"; }; @@ -314,6 +340,7 @@ pwm { compatible = "st,stm32-pwm"; + #pwm-cells = <3>; status = "disabled"; }; @@ -567,6 +594,7 @@ pwm { compatible = "st,stm32-pwm"; + #pwm-cells = <3>; status = "disabled"; }; @@ -575,6 +603,11 @@ reg = <0>; status = "disabled"; }; + + counter { + compatible = "st,stm32-timer-counter"; + status = "disabled"; + }; }; timers8: timer@44001000 { @@ -597,6 +630,7 @@ pwm { compatible = "st,stm32-pwm"; + #pwm-cells = <3>; status = "disabled"; }; @@ -605,6 +639,11 @@ reg = <7>; status = "disabled"; }; + + counter { + compatible = "st,stm32-timer-counter"; + status = "disabled"; + }; }; usart6: serial@44003000 { @@ -670,6 +709,7 @@ pwm { compatible = "st,stm32-pwm"; + #pwm-cells = <3>; status = "disabled"; }; @@ -694,6 +734,7 @@ pwm { compatible = "st,stm32-pwm"; + #pwm-cells = <3>; status = "disabled"; }; timer@15 { @@ -717,6 +758,7 @@ pwm { compatible = "st,stm32-pwm"; + #pwm-cells = <3>; status = "disabled"; }; @@ -905,33 +947,7 @@ }; }; - m_can1: can@4400e000 { - compatible = "bosch,m_can"; - reg = <0x4400e000 0x400>, <0x44011000 0x1400>; - reg-names = "m_can", "message_ram"; - interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "int0", "int1"; - clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>; - clock-names = "hclk", "cclk"; - bosch,mram-cfg = <0x1400 0 0 32 0 0 2 2>; - status = "disabled"; - }; - - m_can2: can@4400f000 { - compatible = "bosch,m_can"; - reg = <0x4400f000 0x400>, <0x44011000 0x2800>; - reg-names = "m_can", "message_ram"; - interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "int0", "int1"; - clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>; - clock-names = "hclk", "cclk"; - bosch,mram-cfg = <0x0 0 0 32 0 0 2 2>; - status = "disabled"; - }; - - dma1: dma@48000000 { + dma1: dma-controller@48000000 { compatible = "st,stm32-dma"; reg = <0x48000000 0x400>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, @@ -948,7 +964,7 @@ dma-requests = <8>; }; - dma2: dma@48001000 { + dma2: dma-controller@48001000 { compatible = "st,stm32-dma"; reg = <0x48001000 0x400>; interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, @@ -983,6 +999,7 @@ clocks = <&rcc ADC12>, <&rcc ADC12_K>; clock-names = "bus", "adc"; interrupt-controller; + st,syscfg = <&syscfg>; #interrupt-cells = <1>; #address-cells = <1>; #size-cells = <0>; @@ -1011,6 +1028,21 @@ }; }; + sdmmc3: sdmmc@48004000 { + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x10153180>; + reg = <0x48004000 0x400>; + interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cmd_irq"; + clocks = <&rcc SDMMC3_K>; + clock-names = "apb_pclk"; + resets = <&rcc SDMMC3_R>; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <120000000>; + status = "disabled"; + }; + usbotg_hs: usb-otg@49000000 { compatible = "snps,dwc2"; reg = <0x49000000 0x10000>; @@ -1060,6 +1092,29 @@ #reset-cells = <1>; }; + pwr_regulators: pwr@50001000 { + compatible = "st,stm32mp1,pwr-reg"; + reg = <0x50001000 0x10>; + + reg11: reg11 { + regulator-name = "reg11"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + + reg18: reg18 { + regulator-name = "reg18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + usb33: usb33 { + regulator-name = "usb33"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + }; + exti: interrupt-controller@5000d000 { compatible = "st,stm32mp1-exti", "syscon"; interrupt-controller; @@ -1200,15 +1255,6 @@ status = "disabled"; }; - cryp1: cryp@54001000 { - compatible = "st,stm32mp1-cryp"; - reg = <0x54001000 0x400>; - interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&rcc CRYP1>; - resets = <&rcc CRYP1_R>; - status = "disabled"; - }; - hash1: hash@54002000 { compatible = "st,stm32f756-hash"; reg = <0x54002000 0x400>; @@ -1229,7 +1275,7 @@ status = "disabled"; }; - mdma1: dma@58000000 { + mdma1: dma-controller@58000000 { compatible = "st,stm32h7-mdma"; reg = <0x58000000 0x1000>; interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; @@ -1239,11 +1285,33 @@ dma-requests = <48>; }; + fmc: nand-controller@58002000 { + compatible = "st,stm32mp15-fmc2"; + reg = <0x58002000 0x1000>, + <0x80000000 0x1000>, + <0x88010000 0x1000>, + <0x88020000 0x1000>, + <0x81000000 0x1000>, + <0x89010000 0x1000>, + <0x89020000 0x1000>; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&mdma1 20 0x10 0x12000a02 0x0 0x0>, + <&mdma1 20 0x10 0x12000a08 0x0 0x0>, + <&mdma1 21 0x10 0x12000a0a 0x0 0x0>; + dma-names = "tx", "rx", "ecc"; + clocks = <&rcc FMC_K>; + resets = <&rcc FMC_R>; + status = "disabled"; + }; + qspi: spi@58003000 { compatible = "st,stm32f469-qspi"; reg = <0x58003000 0x1000>, <0x70000000 0x10000000>; reg-names = "qspi", "qspi_mm"; interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&mdma1 22 0x10 0x100002 0x0 0x0>, + <&mdma1 22 0x10 0x100008 0x0 0x0>; + dma-names = "tx", "rx"; clocks = <&rcc QSPI_K>; resets = <&rcc QSPI_R>; status = "disabled"; @@ -1254,13 +1322,29 @@ arm,primecell-periphid = <0x10153180>; reg = <0x58005000 0x1000>; interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "cmd_irq"; + interrupt-names = "cmd_irq"; clocks = <&rcc SDMMC1_K>; clock-names = "apb_pclk"; resets = <&rcc SDMMC1_R>; cap-sd-highspeed; cap-mmc-highspeed; max-frequency = <120000000>; + status = "disabled"; + }; + + sdmmc2: sdmmc@58007000 { + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x10153180>; + reg = <0x58007000 0x1000>; + interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cmd_irq"; + clocks = <&rcc SDMMC2_K>; + clock-names = "apb_pclk"; + resets = <&rcc SDMMC2_R>; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <120000000>; + status = "disabled"; }; crc1: crc@58009000 { @@ -1285,16 +1369,15 @@ clock-names = "stmmaceth", "mac-clk-tx", "mac-clk-rx", - "ethstp", - "syscfg-clk"; + "ethstp"; clocks = <&rcc ETHMAC>, <&rcc ETHTX>, <&rcc ETHRX>, - <&rcc ETHSTP>, - <&rcc SYSCFG>; + <&rcc ETHSTP>; st,syscon = <&syscfg 0x4>; snps,mixed-burst; snps,pbl = <2>; + snps,en-tx-lpi-clockgating; snps,axi-config = <&stmmac_axi_config_0>; snps,tso; status = "disabled"; @@ -1319,26 +1402,6 @@ status = "disabled"; }; - gpu: gpu@59000000 { - compatible = "vivante,gc"; - reg = <0x59000000 0x800>; - interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&rcc GPU>, <&rcc GPU_K>; - clock-names = "bus" ,"core"; - resets = <&rcc GPU_R>; - status = "disabled"; - }; - - dsi: dsi@5a000000 { - compatible = "st,stm32-dsi"; - reg = <0x5a000000 0x800>; - clocks = <&rcc DSI_K>, <&clk_hse>, <&rcc DSI_PX>; - clock-names = "pclk", "ref", "px_clk"; - resets = <&rcc DSI_R>; - reset-names = "apb"; - status = "disabled"; - }; - ltdc: display-controller@5a001000 { compatible = "st,stm32-ltdc"; reg = <0x5a001000 0x400>; @@ -1422,7 +1485,7 @@ status = "disabled"; }; - bsec: nvmem@5c005000 { + bsec: efuse@5c005000 { compatible = "st,stm32mp15-bsec"; reg = <0x5c005000 0x400>; #address-cells = <1>; @@ -1447,5 +1510,183 @@ #size-cells = <0>; status = "disabled"; }; + + /* + * Break node order to solve dependency probe issue between + * pinctrl and exti. + */ + pinctrl: pin-controller@50002000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,stm32mp157-pinctrl"; + ranges = <0 0x50002000 0xa400>; + interrupt-parent = <&exti>; + st,syscfg = <&exti 0x60 0xff>; + pins-are-numbered; + + gpioa: gpio@50002000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x0 0x400>; + clocks = <&rcc GPIOA>; + st,bank-name = "GPIOA"; + status = "disabled"; + }; + + gpiob: gpio@50003000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x1000 0x400>; + clocks = <&rcc GPIOB>; + st,bank-name = "GPIOB"; + status = "disabled"; + }; + + gpioc: gpio@50004000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x2000 0x400>; + clocks = <&rcc GPIOC>; + st,bank-name = "GPIOC"; + status = "disabled"; + }; + + gpiod: gpio@50005000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x3000 0x400>; + clocks = <&rcc GPIOD>; + st,bank-name = "GPIOD"; + status = "disabled"; + }; + + gpioe: gpio@50006000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x4000 0x400>; + clocks = <&rcc GPIOE>; + st,bank-name = "GPIOE"; + status = "disabled"; + }; + + gpiof: gpio@50007000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x5000 0x400>; + clocks = <&rcc GPIOF>; + st,bank-name = "GPIOF"; + status = "disabled"; + }; + + gpiog: gpio@50008000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x6000 0x400>; + clocks = <&rcc GPIOG>; + st,bank-name = "GPIOG"; + status = "disabled"; + }; + + gpioh: gpio@50009000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x7000 0x400>; + clocks = <&rcc GPIOH>; + st,bank-name = "GPIOH"; + status = "disabled"; + }; + + gpioi: gpio@5000a000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x8000 0x400>; + clocks = <&rcc GPIOI>; + st,bank-name = "GPIOI"; + status = "disabled"; + }; + + gpioj: gpio@5000b000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x9000 0x400>; + clocks = <&rcc GPIOJ>; + st,bank-name = "GPIOJ"; + status = "disabled"; + }; + + gpiok: gpio@5000c000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0xa000 0x400>; + clocks = <&rcc GPIOK>; + st,bank-name = "GPIOK"; + status = "disabled"; + }; + }; + + pinctrl_z: pin-controller-z@54004000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,stm32mp157-z-pinctrl"; + ranges = <0 0x54004000 0x400>; + pins-are-numbered; + interrupt-parent = <&exti>; + st,syscfg = <&exti 0x60 0xff>; + + gpioz: gpio@54004000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0 0x400>; + clocks = <&rcc GPIOZ>; + st,bank-name = "GPIOZ"; + st,bank-ioport = <11>; + status = "disabled"; + }; + }; + }; + + mlahb: ahb { + compatible = "st,mlahb", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + dma-ranges = <0x00000000 0x38000000 0x10000>, + <0x10000000 0x10000000 0x60000>, + <0x30000000 0x30000000 0x60000>; + + m4_rproc: m4@10000000 { + compatible = "st,stm32mp1-m4"; + reg = <0x10000000 0x40000>, + <0x30000000 0x40000>, + <0x38000000 0x10000>; + resets = <&rcc MCU_R>; + st,syscfg-holdboot = <&rcc 0x10C 0x1>; + st,syscfg-tz = <&rcc 0x000 0x1>; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/stm32mp153.dtsi b/arch/arm/boot/dts/stm32mp153.dtsi new file mode 100644 index 000000000000..2d759fc6015c --- /dev/null +++ b/arch/arm/boot/dts/stm32mp153.dtsi @@ -0,0 +1,45 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2019 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics. + */ + +#include "stm32mp151.dtsi" + +/ { + cpus { + cpu1: cpu@1 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <1>; + }; + }; + + soc { + m_can1: can@4400e000 { + compatible = "bosch,m_can"; + reg = <0x4400e000 0x400>, <0x44011000 0x1400>; + reg-names = "m_can", "message_ram"; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>; + clock-names = "hclk", "cclk"; + bosch,mram-cfg = <0x0 0 0 32 0 0 2 2>; + status = "disabled"; + }; + + m_can2: can@4400f000 { + compatible = "bosch,m_can"; + reg = <0x4400f000 0x400>, <0x44011000 0x2800>; + reg-names = "m_can", "message_ram"; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>; + clock-names = "hclk", "cclk"; + bosch,mram-cfg = <0x1400 0 0 32 0 0 2 2>; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi deleted file mode 100644 index df6470133574..000000000000 --- a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi +++ /dev/null @@ -1,905 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) -/* - * Copyright (C) STMicroelectronics 2017 - All Rights Reserved - * Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics. - */ -#include <dt-bindings/pinctrl/stm32-pinfunc.h> - -/ { - soc { - pinctrl: pin-controller@50002000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "st,stm32mp157-pinctrl"; - ranges = <0 0x50002000 0xa400>; - interrupt-parent = <&exti>; - st,syscfg = <&exti 0x60 0xff>; - pins-are-numbered; - - gpioa: gpio@50002000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x0 0x400>; - clocks = <&rcc GPIOA>; - st,bank-name = "GPIOA"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 0 16>; - status = "disabled"; - }; - - gpiob: gpio@50003000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x1000 0x400>; - clocks = <&rcc GPIOB>; - st,bank-name = "GPIOB"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 16 16>; - status = "disabled"; - }; - - gpioc: gpio@50004000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x2000 0x400>; - clocks = <&rcc GPIOC>; - st,bank-name = "GPIOC"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 32 16>; - status = "disabled"; - }; - - gpiod: gpio@50005000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x3000 0x400>; - clocks = <&rcc GPIOD>; - st,bank-name = "GPIOD"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 48 16>; - status = "disabled"; - }; - - gpioe: gpio@50006000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x4000 0x400>; - clocks = <&rcc GPIOE>; - st,bank-name = "GPIOE"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 64 16>; - status = "disabled"; - }; - - gpiof: gpio@50007000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x5000 0x400>; - clocks = <&rcc GPIOF>; - st,bank-name = "GPIOF"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 80 16>; - status = "disabled"; - }; - - gpiog: gpio@50008000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x6000 0x400>; - clocks = <&rcc GPIOG>; - st,bank-name = "GPIOG"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 96 16>; - status = "disabled"; - }; - - gpioh: gpio@50009000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x7000 0x400>; - clocks = <&rcc GPIOH>; - st,bank-name = "GPIOH"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 112 16>; - status = "disabled"; - }; - - gpioi: gpio@5000a000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x8000 0x400>; - clocks = <&rcc GPIOI>; - st,bank-name = "GPIOI"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 128 16>; - status = "disabled"; - }; - - gpioj: gpio@5000b000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x9000 0x400>; - clocks = <&rcc GPIOJ>; - st,bank-name = "GPIOJ"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 144 16>; - status = "disabled"; - }; - - gpiok: gpio@5000c000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0xa000 0x400>; - clocks = <&rcc GPIOK>; - st,bank-name = "GPIOK"; - ngpios = <8>; - gpio-ranges = <&pinctrl 0 160 8>; - status = "disabled"; - }; - - cec_pins_a: cec-0 { - pins { - pinmux = <STM32_PINMUX('A', 15, AF4)>; - bias-disable; - drive-open-drain; - slew-rate = <0>; - }; - }; - - cec_pins_sleep_a: cec-sleep-0 { - pins { - pinmux = <STM32_PINMUX('A', 15, ANALOG)>; /* HDMI_CEC */ - }; - }; - - cec_pins_b: cec-1 { - pins { - pinmux = <STM32_PINMUX('B', 6, AF5)>; - bias-disable; - drive-open-drain; - slew-rate = <0>; - }; - }; - - cec_pins_sleep_b: cec-sleep-1 { - pins { - pinmux = <STM32_PINMUX('B', 6, ANALOG)>; /* HDMI_CEC */ - }; - }; - - dcmi_pins_a: dcmi-0 { - pins { - pinmux = <STM32_PINMUX('H', 8, AF13)>,/* DCMI_HSYNC */ - <STM32_PINMUX('B', 7, AF13)>,/* DCMI_VSYNC */ - <STM32_PINMUX('A', 6, AF13)>,/* DCMI_PIXCLK */ - <STM32_PINMUX('H', 9, AF13)>,/* DCMI_D0 */ - <STM32_PINMUX('H', 10, AF13)>,/* DCMI_D1 */ - <STM32_PINMUX('H', 11, AF13)>,/* DCMI_D2 */ - <STM32_PINMUX('H', 12, AF13)>,/* DCMI_D3 */ - <STM32_PINMUX('H', 14, AF13)>,/* DCMI_D4 */ - <STM32_PINMUX('I', 4, AF13)>,/* DCMI_D5 */ - <STM32_PINMUX('B', 8, AF13)>,/* DCMI_D6 */ - <STM32_PINMUX('E', 6, AF13)>,/* DCMI_D7 */ - <STM32_PINMUX('I', 1, AF13)>,/* DCMI_D8 */ - <STM32_PINMUX('H', 7, AF13)>,/* DCMI_D9 */ - <STM32_PINMUX('I', 3, AF13)>,/* DCMI_D10 */ - <STM32_PINMUX('H', 15, AF13)>;/* DCMI_D11 */ - bias-disable; - }; - }; - - dcmi_sleep_pins_a: dcmi-sleep-0 { - pins { - pinmux = <STM32_PINMUX('H', 8, ANALOG)>,/* DCMI_HSYNC */ - <STM32_PINMUX('B', 7, ANALOG)>,/* DCMI_VSYNC */ - <STM32_PINMUX('A', 6, ANALOG)>,/* DCMI_PIXCLK */ - <STM32_PINMUX('H', 9, ANALOG)>,/* DCMI_D0 */ - <STM32_PINMUX('H', 10, ANALOG)>,/* DCMI_D1 */ - <STM32_PINMUX('H', 11, ANALOG)>,/* DCMI_D2 */ - <STM32_PINMUX('H', 12, ANALOG)>,/* DCMI_D3 */ - <STM32_PINMUX('H', 14, ANALOG)>,/* DCMI_D4 */ - <STM32_PINMUX('I', 4, ANALOG)>,/* DCMI_D5 */ - <STM32_PINMUX('B', 8, ANALOG)>,/* DCMI_D6 */ - <STM32_PINMUX('E', 6, ANALOG)>,/* DCMI_D7 */ - <STM32_PINMUX('I', 1, ANALOG)>,/* DCMI_D8 */ - <STM32_PINMUX('H', 7, ANALOG)>,/* DCMI_D9 */ - <STM32_PINMUX('I', 3, ANALOG)>,/* DCMI_D10 */ - <STM32_PINMUX('H', 15, ANALOG)>;/* DCMI_D11 */ - }; - }; - - ethernet0_rgmii_pins_a: rgmii-0 { - pins1 { - pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */ - <STM32_PINMUX('G', 4, AF11)>, /* ETH_RGMII_GTX_CLK */ - <STM32_PINMUX('G', 13, AF11)>, /* ETH_RGMII_TXD0 */ - <STM32_PINMUX('G', 14, AF11)>, /* ETH_RGMII_TXD1 */ - <STM32_PINMUX('C', 2, AF11)>, /* ETH_RGMII_TXD2 */ - <STM32_PINMUX('E', 2, AF11)>, /* ETH_RGMII_TXD3 */ - <STM32_PINMUX('B', 11, AF11)>, /* ETH_RGMII_TX_CTL */ - <STM32_PINMUX('A', 2, AF11)>, /* ETH_MDIO */ - <STM32_PINMUX('C', 1, AF11)>; /* ETH_MDC */ - bias-disable; - drive-push-pull; - slew-rate = <3>; - }; - pins2 { - pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH_RGMII_RXD0 */ - <STM32_PINMUX('C', 5, AF11)>, /* ETH_RGMII_RXD1 */ - <STM32_PINMUX('B', 0, AF11)>, /* ETH_RGMII_RXD2 */ - <STM32_PINMUX('B', 1, AF11)>, /* ETH_RGMII_RXD3 */ - <STM32_PINMUX('A', 1, AF11)>, /* ETH_RGMII_RX_CLK */ - <STM32_PINMUX('A', 7, AF11)>; /* ETH_RGMII_RX_CTL */ - bias-disable; - }; - }; - - ethernet0_rgmii_pins_sleep_a: rgmii-sleep-0 { - pins1 { - pinmux = <STM32_PINMUX('G', 5, ANALOG)>, /* ETH_RGMII_CLK125 */ - <STM32_PINMUX('G', 4, ANALOG)>, /* ETH_RGMII_GTX_CLK */ - <STM32_PINMUX('G', 13, ANALOG)>, /* ETH_RGMII_TXD0 */ - <STM32_PINMUX('G', 14, ANALOG)>, /* ETH_RGMII_TXD1 */ - <STM32_PINMUX('C', 2, ANALOG)>, /* ETH_RGMII_TXD2 */ - <STM32_PINMUX('E', 2, ANALOG)>, /* ETH_RGMII_TXD3 */ - <STM32_PINMUX('B', 11, ANALOG)>, /* ETH_RGMII_TX_CTL */ - <STM32_PINMUX('A', 2, ANALOG)>, /* ETH_MDIO */ - <STM32_PINMUX('C', 1, ANALOG)>, /* ETH_MDC */ - <STM32_PINMUX('C', 4, ANALOG)>, /* ETH_RGMII_RXD0 */ - <STM32_PINMUX('C', 5, ANALOG)>, /* ETH_RGMII_RXD1 */ - <STM32_PINMUX('B', 0, ANALOG)>, /* ETH_RGMII_RXD2 */ - <STM32_PINMUX('B', 1, ANALOG)>, /* ETH_RGMII_RXD3 */ - <STM32_PINMUX('A', 1, ANALOG)>, /* ETH_RGMII_RX_CLK */ - <STM32_PINMUX('A', 7, ANALOG)>; /* ETH_RGMII_RX_CTL */ - }; - }; - - i2c1_pins_a: i2c1-0 { - pins { - pinmux = <STM32_PINMUX('D', 12, AF5)>, /* I2C1_SCL */ - <STM32_PINMUX('F', 15, AF5)>; /* I2C1_SDA */ - bias-disable; - drive-open-drain; - slew-rate = <0>; - }; - }; - - i2c1_pins_sleep_a: i2c1-1 { - pins { - pinmux = <STM32_PINMUX('D', 12, ANALOG)>, /* I2C1_SCL */ - <STM32_PINMUX('F', 15, ANALOG)>; /* I2C1_SDA */ - }; - }; - - i2c1_pins_b: i2c1-2 { - pins { - pinmux = <STM32_PINMUX('F', 14, AF5)>, /* I2C1_SCL */ - <STM32_PINMUX('F', 15, AF5)>; /* I2C1_SDA */ - bias-disable; - drive-open-drain; - slew-rate = <0>; - }; - }; - - i2c1_pins_sleep_b: i2c1-3 { - pins { - pinmux = <STM32_PINMUX('F', 14, ANALOG)>, /* I2C1_SCL */ - <STM32_PINMUX('F', 15, ANALOG)>; /* I2C1_SDA */ - }; - }; - - i2c2_pins_a: i2c2-0 { - pins { - pinmux = <STM32_PINMUX('H', 4, AF4)>, /* I2C2_SCL */ - <STM32_PINMUX('H', 5, AF4)>; /* I2C2_SDA */ - bias-disable; - drive-open-drain; - slew-rate = <0>; - }; - }; - - i2c2_pins_sleep_a: i2c2-1 { - pins { - pinmux = <STM32_PINMUX('H', 4, ANALOG)>, /* I2C2_SCL */ - <STM32_PINMUX('H', 5, ANALOG)>; /* I2C2_SDA */ - }; - }; - - i2c2_pins_b1: i2c2-2 { - pins { - pinmux = <STM32_PINMUX('H', 5, AF4)>; /* I2C2_SDA */ - bias-disable; - drive-open-drain; - slew-rate = <0>; - }; - }; - - i2c2_pins_sleep_b1: i2c2-3 { - pins { - pinmux = <STM32_PINMUX('H', 5, ANALOG)>; /* I2C2_SDA */ - }; - }; - - i2c5_pins_a: i2c5-0 { - pins { - pinmux = <STM32_PINMUX('A', 11, AF4)>, /* I2C5_SCL */ - <STM32_PINMUX('A', 12, AF4)>; /* I2C5_SDA */ - bias-disable; - drive-open-drain; - slew-rate = <0>; - }; - }; - - i2c5_pins_sleep_a: i2c5-1 { - pins { - pinmux = <STM32_PINMUX('A', 11, ANALOG)>, /* I2C5_SCL */ - <STM32_PINMUX('A', 12, ANALOG)>; /* I2C5_SDA */ - - }; - }; - - i2s2_pins_a: i2s2-0 { - pins { - pinmux = <STM32_PINMUX('I', 3, AF5)>, /* I2S2_SDO */ - <STM32_PINMUX('B', 9, AF5)>, /* I2S2_WS */ - <STM32_PINMUX('A', 9, AF5)>; /* I2S2_CK */ - slew-rate = <1>; - drive-push-pull; - bias-disable; - }; - }; - - i2s2_pins_sleep_a: i2s2-1 { - pins { - pinmux = <STM32_PINMUX('I', 3, ANALOG)>, /* I2S2_SDO */ - <STM32_PINMUX('B', 9, ANALOG)>, /* I2S2_WS */ - <STM32_PINMUX('A', 9, ANALOG)>; /* I2S2_CK */ - }; - }; - - ltdc_pins_a: ltdc-a-0 { - pins { - pinmux = <STM32_PINMUX('G', 7, AF14)>, /* LCD_CLK */ - <STM32_PINMUX('I', 10, AF14)>, /* LCD_HSYNC */ - <STM32_PINMUX('I', 9, AF14)>, /* LCD_VSYNC */ - <STM32_PINMUX('F', 10, AF14)>, /* LCD_DE */ - <STM32_PINMUX('H', 2, AF14)>, /* LCD_R0 */ - <STM32_PINMUX('H', 3, AF14)>, /* LCD_R1 */ - <STM32_PINMUX('H', 8, AF14)>, /* LCD_R2 */ - <STM32_PINMUX('H', 9, AF14)>, /* LCD_R3 */ - <STM32_PINMUX('H', 10, AF14)>, /* LCD_R4 */ - <STM32_PINMUX('C', 0, AF14)>, /* LCD_R5 */ - <STM32_PINMUX('H', 12, AF14)>, /* LCD_R6 */ - <STM32_PINMUX('E', 15, AF14)>, /* LCD_R7 */ - <STM32_PINMUX('E', 5, AF14)>, /* LCD_G0 */ - <STM32_PINMUX('E', 6, AF14)>, /* LCD_G1 */ - <STM32_PINMUX('H', 13, AF14)>, /* LCD_G2 */ - <STM32_PINMUX('H', 14, AF14)>, /* LCD_G3 */ - <STM32_PINMUX('H', 15, AF14)>, /* LCD_G4 */ - <STM32_PINMUX('I', 0, AF14)>, /* LCD_G5 */ - <STM32_PINMUX('I', 1, AF14)>, /* LCD_G6 */ - <STM32_PINMUX('I', 2, AF14)>, /* LCD_G7 */ - <STM32_PINMUX('D', 9, AF14)>, /* LCD_B0 */ - <STM32_PINMUX('G', 12, AF14)>, /* LCD_B1 */ - <STM32_PINMUX('G', 10, AF14)>, /* LCD_B2 */ - <STM32_PINMUX('D', 10, AF14)>, /* LCD_B3 */ - <STM32_PINMUX('I', 4, AF14)>, /* LCD_B4 */ - <STM32_PINMUX('A', 3, AF14)>, /* LCD_B5 */ - <STM32_PINMUX('B', 8, AF14)>, /* LCD_B6 */ - <STM32_PINMUX('D', 8, AF14)>; /* LCD_B7 */ - bias-disable; - drive-push-pull; - slew-rate = <1>; - }; - }; - - ltdc_pins_sleep_a: ltdc-a-1 { - pins { - pinmux = <STM32_PINMUX('G', 7, ANALOG)>, /* LCD_CLK */ - <STM32_PINMUX('I', 10, ANALOG)>, /* LCD_HSYNC */ - <STM32_PINMUX('I', 9, ANALOG)>, /* LCD_VSYNC */ - <STM32_PINMUX('F', 10, ANALOG)>, /* LCD_DE */ - <STM32_PINMUX('H', 2, ANALOG)>, /* LCD_R0 */ - <STM32_PINMUX('H', 3, ANALOG)>, /* LCD_R1 */ - <STM32_PINMUX('H', 8, ANALOG)>, /* LCD_R2 */ - <STM32_PINMUX('H', 9, ANALOG)>, /* LCD_R3 */ - <STM32_PINMUX('H', 10, ANALOG)>, /* LCD_R4 */ - <STM32_PINMUX('C', 0, ANALOG)>, /* LCD_R5 */ - <STM32_PINMUX('H', 12, ANALOG)>, /* LCD_R6 */ - <STM32_PINMUX('E', 15, ANALOG)>, /* LCD_R7 */ - <STM32_PINMUX('E', 5, ANALOG)>, /* LCD_G0 */ - <STM32_PINMUX('E', 6, ANALOG)>, /* LCD_G1 */ - <STM32_PINMUX('H', 13, ANALOG)>, /* LCD_G2 */ - <STM32_PINMUX('H', 14, ANALOG)>, /* LCD_G3 */ - <STM32_PINMUX('H', 15, ANALOG)>, /* LCD_G4 */ - <STM32_PINMUX('I', 0, ANALOG)>, /* LCD_G5 */ - <STM32_PINMUX('I', 1, ANALOG)>, /* LCD_G6 */ - <STM32_PINMUX('I', 2, ANALOG)>, /* LCD_G7 */ - <STM32_PINMUX('D', 9, ANALOG)>, /* LCD_B0 */ - <STM32_PINMUX('G', 12, ANALOG)>, /* LCD_B1 */ - <STM32_PINMUX('G', 10, ANALOG)>, /* LCD_B2 */ - <STM32_PINMUX('D', 10, ANALOG)>, /* LCD_B3 */ - <STM32_PINMUX('I', 4, ANALOG)>, /* LCD_B4 */ - <STM32_PINMUX('A', 3, ANALOG)>, /* LCD_B5 */ - <STM32_PINMUX('B', 8, ANALOG)>, /* LCD_B6 */ - <STM32_PINMUX('D', 8, ANALOG)>; /* LCD_B7 */ - }; - }; - - ltdc_pins_b: ltdc-b-0 { - pins { - pinmux = <STM32_PINMUX('I', 14, AF14)>, /* LCD_CLK */ - <STM32_PINMUX('I', 12, AF14)>, /* LCD_HSYNC */ - <STM32_PINMUX('I', 13, AF14)>, /* LCD_VSYNC */ - <STM32_PINMUX('K', 7, AF14)>, /* LCD_DE */ - <STM32_PINMUX('I', 15, AF14)>, /* LCD_R0 */ - <STM32_PINMUX('J', 0, AF14)>, /* LCD_R1 */ - <STM32_PINMUX('J', 1, AF14)>, /* LCD_R2 */ - <STM32_PINMUX('J', 2, AF14)>, /* LCD_R3 */ - <STM32_PINMUX('J', 3, AF14)>, /* LCD_R4 */ - <STM32_PINMUX('J', 4, AF14)>, /* LCD_R5 */ - <STM32_PINMUX('J', 5, AF14)>, /* LCD_R6 */ - <STM32_PINMUX('J', 6, AF14)>, /* LCD_R7 */ - <STM32_PINMUX('J', 7, AF14)>, /* LCD_G0 */ - <STM32_PINMUX('J', 8, AF14)>, /* LCD_G1 */ - <STM32_PINMUX('J', 9, AF14)>, /* LCD_G2 */ - <STM32_PINMUX('J', 10, AF14)>, /* LCD_G3 */ - <STM32_PINMUX('J', 11, AF14)>, /* LCD_G4 */ - <STM32_PINMUX('K', 0, AF14)>, /* LCD_G5 */ - <STM32_PINMUX('K', 1, AF14)>, /* LCD_G6 */ - <STM32_PINMUX('K', 2, AF14)>, /* LCD_G7 */ - <STM32_PINMUX('J', 12, AF14)>, /* LCD_B0 */ - <STM32_PINMUX('J', 13, AF14)>, /* LCD_B1 */ - <STM32_PINMUX('J', 14, AF14)>, /* LCD_B2 */ - <STM32_PINMUX('J', 15, AF14)>, /* LCD_B3 */ - <STM32_PINMUX('K', 3, AF14)>, /* LCD_B4 */ - <STM32_PINMUX('K', 4, AF14)>, /* LCD_B5 */ - <STM32_PINMUX('K', 5, AF14)>, /* LCD_B6 */ - <STM32_PINMUX('K', 6, AF14)>; /* LCD_B7 */ - bias-disable; - drive-push-pull; - slew-rate = <1>; - }; - }; - - ltdc_pins_sleep_b: ltdc-b-1 { - pins { - pinmux = <STM32_PINMUX('I', 14, ANALOG)>, /* LCD_CLK */ - <STM32_PINMUX('I', 12, ANALOG)>, /* LCD_HSYNC */ - <STM32_PINMUX('I', 13, ANALOG)>, /* LCD_VSYNC */ - <STM32_PINMUX('K', 7, ANALOG)>, /* LCD_DE */ - <STM32_PINMUX('I', 15, ANALOG)>, /* LCD_R0 */ - <STM32_PINMUX('J', 0, ANALOG)>, /* LCD_R1 */ - <STM32_PINMUX('J', 1, ANALOG)>, /* LCD_R2 */ - <STM32_PINMUX('J', 2, ANALOG)>, /* LCD_R3 */ - <STM32_PINMUX('J', 3, ANALOG)>, /* LCD_R4 */ - <STM32_PINMUX('J', 4, ANALOG)>, /* LCD_R5 */ - <STM32_PINMUX('J', 5, ANALOG)>, /* LCD_R6 */ - <STM32_PINMUX('J', 6, ANALOG)>, /* LCD_R7 */ - <STM32_PINMUX('J', 7, ANALOG)>, /* LCD_G0 */ - <STM32_PINMUX('J', 8, ANALOG)>, /* LCD_G1 */ - <STM32_PINMUX('J', 9, ANALOG)>, /* LCD_G2 */ - <STM32_PINMUX('J', 10, ANALOG)>, /* LCD_G3 */ - <STM32_PINMUX('J', 11, ANALOG)>, /* LCD_G4 */ - <STM32_PINMUX('K', 0, ANALOG)>, /* LCD_G5 */ - <STM32_PINMUX('K', 1, ANALOG)>, /* LCD_G6 */ - <STM32_PINMUX('K', 2, ANALOG)>, /* LCD_G7 */ - <STM32_PINMUX('J', 12, ANALOG)>, /* LCD_B0 */ - <STM32_PINMUX('J', 13, ANALOG)>, /* LCD_B1 */ - <STM32_PINMUX('J', 14, ANALOG)>, /* LCD_B2 */ - <STM32_PINMUX('J', 15, ANALOG)>, /* LCD_B3 */ - <STM32_PINMUX('K', 3, ANALOG)>, /* LCD_B4 */ - <STM32_PINMUX('K', 4, ANALOG)>, /* LCD_B5 */ - <STM32_PINMUX('K', 5, ANALOG)>, /* LCD_B6 */ - <STM32_PINMUX('K', 6, ANALOG)>; /* LCD_B7 */ - }; - }; - - m_can1_pins_a: m-can1-0 { - pins1 { - pinmux = <STM32_PINMUX('H', 13, AF9)>; /* CAN1_TX */ - slew-rate = <1>; - drive-push-pull; - bias-disable; - }; - pins2 { - pinmux = <STM32_PINMUX('I', 9, AF9)>; /* CAN1_RX */ - bias-disable; - }; - }; - - m_can1_sleep_pins_a: m_can1-sleep@0 { - pins { - pinmux = <STM32_PINMUX('H', 13, ANALOG)>, /* CAN1_TX */ - <STM32_PINMUX('I', 9, ANALOG)>; /* CAN1_RX */ - }; - }; - - pwm2_pins_a: pwm2-0 { - pins { - pinmux = <STM32_PINMUX('A', 3, AF1)>; /* TIM2_CH4 */ - bias-pull-down; - drive-push-pull; - slew-rate = <0>; - }; - }; - - pwm8_pins_a: pwm8-0 { - pins { - pinmux = <STM32_PINMUX('I', 2, AF3)>; /* TIM8_CH4 */ - bias-pull-down; - drive-push-pull; - slew-rate = <0>; - }; - }; - - pwm12_pins_a: pwm12-0 { - pins { - pinmux = <STM32_PINMUX('H', 6, AF2)>; /* TIM12_CH1 */ - bias-pull-down; - drive-push-pull; - slew-rate = <0>; - }; - }; - - qspi_clk_pins_a: qspi-clk-0 { - pins { - pinmux = <STM32_PINMUX('F', 10, AF9)>; /* QSPI_CLK */ - bias-disable; - drive-push-pull; - slew-rate = <3>; - }; - }; - - qspi_clk_sleep_pins_a: qspi-clk-sleep-0 { - pins { - pinmux = <STM32_PINMUX('F', 10, ANALOG)>; /* QSPI_CLK */ - }; - }; - - qspi_bk1_pins_a: qspi-bk1-0 { - pins1 { - pinmux = <STM32_PINMUX('F', 8, AF10)>, /* QSPI_BK1_IO0 */ - <STM32_PINMUX('F', 9, AF10)>, /* QSPI_BK1_IO1 */ - <STM32_PINMUX('F', 7, AF9)>, /* QSPI_BK1_IO2 */ - <STM32_PINMUX('F', 6, AF9)>; /* QSPI_BK1_IO3 */ - bias-disable; - drive-push-pull; - slew-rate = <3>; - }; - pins2 { - pinmux = <STM32_PINMUX('B', 6, AF10)>; /* QSPI_BK1_NCS */ - bias-pull-up; - drive-push-pull; - slew-rate = <3>; - }; - }; - - qspi_bk1_sleep_pins_a: qspi-bk1-sleep-0 { - pins { - pinmux = <STM32_PINMUX('F', 8, ANALOG)>, /* QSPI_BK1_IO0 */ - <STM32_PINMUX('F', 9, ANALOG)>, /* QSPI_BK1_IO1 */ - <STM32_PINMUX('F', 7, ANALOG)>, /* QSPI_BK1_IO2 */ - <STM32_PINMUX('F', 6, ANALOG)>, /* QSPI_BK1_IO3 */ - <STM32_PINMUX('B', 6, ANALOG)>; /* QSPI_BK1_NCS */ - }; - }; - - qspi_bk2_pins_a: qspi-bk2-0 { - pins1 { - pinmux = <STM32_PINMUX('H', 2, AF9)>, /* QSPI_BK2_IO0 */ - <STM32_PINMUX('H', 3, AF9)>, /* QSPI_BK2_IO1 */ - <STM32_PINMUX('G', 10, AF11)>, /* QSPI_BK2_IO2 */ - <STM32_PINMUX('G', 7, AF11)>; /* QSPI_BK2_IO3 */ - bias-disable; - drive-push-pull; - slew-rate = <3>; - }; - pins2 { - pinmux = <STM32_PINMUX('C', 0, AF10)>; /* QSPI_BK2_NCS */ - bias-pull-up; - drive-push-pull; - slew-rate = <3>; - }; - }; - - qspi_bk2_sleep_pins_a: qspi-bk2-sleep-0 { - pins { - pinmux = <STM32_PINMUX('H', 2, ANALOG)>, /* QSPI_BK2_IO0 */ - <STM32_PINMUX('H', 3, ANALOG)>, /* QSPI_BK2_IO1 */ - <STM32_PINMUX('G', 10, ANALOG)>, /* QSPI_BK2_IO2 */ - <STM32_PINMUX('G', 7, ANALOG)>, /* QSPI_BK2_IO3 */ - <STM32_PINMUX('C', 0, ANALOG)>; /* QSPI_BK2_NCS */ - }; - }; - - sai2a_pins_a: sai2a-0 { - pins { - pinmux = <STM32_PINMUX('I', 5, AF10)>, /* SAI2_SCK_A */ - <STM32_PINMUX('I', 6, AF10)>, /* SAI2_SD_A */ - <STM32_PINMUX('I', 7, AF10)>, /* SAI2_FS_A */ - <STM32_PINMUX('E', 0, AF10)>; /* SAI2_MCLK_A */ - slew-rate = <0>; - drive-push-pull; - bias-disable; - }; - }; - - sai2a_sleep_pins_a: sai2a-1 { - pins { - pinmux = <STM32_PINMUX('I', 5, ANALOG)>, /* SAI2_SCK_A */ - <STM32_PINMUX('I', 6, ANALOG)>, /* SAI2_SD_A */ - <STM32_PINMUX('I', 7, ANALOG)>, /* SAI2_FS_A */ - <STM32_PINMUX('E', 0, ANALOG)>; /* SAI2_MCLK_A */ - }; - }; - - sai2b_pins_a: sai2b-0 { - pins1 { - pinmux = <STM32_PINMUX('E', 12, AF10)>, /* SAI2_SCK_B */ - <STM32_PINMUX('E', 13, AF10)>, /* SAI2_FS_B */ - <STM32_PINMUX('E', 14, AF10)>; /* SAI2_MCLK_B */ - slew-rate = <0>; - drive-push-pull; - bias-disable; - }; - pins2 { - pinmux = <STM32_PINMUX('F', 11, AF10)>; /* SAI2_SD_B */ - bias-disable; - }; - }; - - sai2b_sleep_pins_a: sai2b-1 { - pins { - pinmux = <STM32_PINMUX('F', 11, ANALOG)>, /* SAI2_SD_B */ - <STM32_PINMUX('E', 12, ANALOG)>, /* SAI2_SCK_B */ - <STM32_PINMUX('E', 13, ANALOG)>, /* SAI2_FS_B */ - <STM32_PINMUX('E', 14, ANALOG)>; /* SAI2_MCLK_B */ - }; - }; - - sai2b_pins_b: sai2b-2 { - pins { - pinmux = <STM32_PINMUX('F', 11, AF10)>; /* SAI2_SD_B */ - bias-disable; - }; - }; - - sai2b_sleep_pins_b: sai2b-3 { - pins { - pinmux = <STM32_PINMUX('F', 11, ANALOG)>; /* SAI2_SD_B */ - }; - }; - - sai4a_pins_a: sai4a-0 { - pins { - pinmux = <STM32_PINMUX('B', 5, AF10)>; /* SAI4_SD_A */ - slew-rate = <0>; - drive-push-pull; - bias-disable; - }; - }; - - sai4a_sleep_pins_a: sai4a-1 { - pins { - pinmux = <STM32_PINMUX('B', 5, ANALOG)>; /* SAI4_SD_A */ - }; - }; - - sdmmc1_b4_pins_a: sdmmc1-b4-0 { - pins { - pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */ - <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */ - <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */ - <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */ - <STM32_PINMUX('C', 12, AF12)>, /* SDMMC1_CK */ - <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */ - slew-rate = <3>; - drive-push-pull; - bias-disable; - }; - }; - - sdmmc1_b4_od_pins_a: sdmmc1-b4-od-0 { - pins1 { - pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */ - <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */ - <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */ - <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */ - <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */ - slew-rate = <3>; - drive-push-pull; - bias-disable; - }; - pins2{ - pinmux = <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */ - slew-rate = <3>; - drive-open-drain; - bias-disable; - }; - }; - - sdmmc1_b4_sleep_pins_a: sdmmc1-b4-sleep-0 { - pins { - pinmux = <STM32_PINMUX('C', 8, ANALOG)>, /* SDMMC1_D0 */ - <STM32_PINMUX('C', 9, ANALOG)>, /* SDMMC1_D1 */ - <STM32_PINMUX('C', 10, ANALOG)>, /* SDMMC1_D2 */ - <STM32_PINMUX('C', 11, ANALOG)>, /* SDMMC1_D3 */ - <STM32_PINMUX('C', 12, ANALOG)>, /* SDMMC1_CK */ - <STM32_PINMUX('D', 2, ANALOG)>; /* SDMMC1_CMD */ - }; - }; - - sdmmc1_dir_pins_a: sdmmc1-dir-0 { - pins1 { - pinmux = <STM32_PINMUX('F', 2, AF11)>, /* SDMMC1_D0DIR */ - <STM32_PINMUX('C', 7, AF8)>, /* SDMMC1_D123DIR */ - <STM32_PINMUX('B', 9, AF11)>; /* SDMMC1_CDIR */ - slew-rate = <3>; - drive-push-pull; - bias-pull-up; - }; - pins2{ - pinmux = <STM32_PINMUX('E', 4, AF8)>; /* SDMMC1_CKIN */ - bias-pull-up; - }; - }; - - sdmmc1_dir_sleep_pins_a: sdmmc1-dir-sleep-0 { - pins { - pinmux = <STM32_PINMUX('F', 2, ANALOG)>, /* SDMMC1_D0DIR */ - <STM32_PINMUX('C', 7, ANALOG)>, /* SDMMC1_D123DIR */ - <STM32_PINMUX('B', 9, ANALOG)>, /* SDMMC1_CDIR */ - <STM32_PINMUX('E', 4, ANALOG)>; /* SDMMC1_CKIN */ - }; - }; - - spdifrx_pins_a: spdifrx-0 { - pins { - pinmux = <STM32_PINMUX('G', 12, AF8)>; /* SPDIF_IN1 */ - bias-disable; - }; - }; - - spdifrx_sleep_pins_a: spdifrx-1 { - pins { - pinmux = <STM32_PINMUX('G', 12, ANALOG)>; /* SPDIF_IN1 */ - }; - }; - - uart4_pins_a: uart4-0 { - pins1 { - pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */ - bias-disable; - drive-push-pull; - slew-rate = <0>; - }; - pins2 { - pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */ - bias-disable; - }; - }; - - uart4_pins_b: uart4-1 { - pins1 { - pinmux = <STM32_PINMUX('D', 1, AF8)>; /* UART4_TX */ - bias-disable; - drive-push-pull; - slew-rate = <0>; - }; - pins2 { - pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */ - bias-disable; - }; - }; - - uart7_pins_a: uart7-0 { - pins1 { - pinmux = <STM32_PINMUX('E', 8, AF7)>; /* UART4_TX */ - bias-disable; - drive-push-pull; - slew-rate = <0>; - }; - pins2 { - pinmux = <STM32_PINMUX('E', 7, AF7)>, /* UART4_RX */ - <STM32_PINMUX('E', 10, AF7)>, /* UART4_CTS */ - <STM32_PINMUX('E', 9, AF7)>; /* UART4_RTS */ - bias-disable; - }; - }; - }; - - pinctrl_z: pin-controller-z@54004000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "st,stm32mp157-z-pinctrl"; - ranges = <0 0x54004000 0x400>; - pins-are-numbered; - interrupt-parent = <&exti>; - st,syscfg = <&exti 0x60 0xff>; - - gpioz: gpio@54004000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0 0x400>; - clocks = <&rcc GPIOZ>; - st,bank-name = "GPIOZ"; - st,bank-ioport = <11>; - ngpios = <8>; - gpio-ranges = <&pinctrl_z 0 400 8>; - status = "disabled"; - }; - - i2c2_pins_b2: i2c2-0 { - pins { - pinmux = <STM32_PINMUX('Z', 0, AF3)>; /* I2C2_SCL */ - bias-disable; - drive-open-drain; - slew-rate = <0>; - }; - }; - - i2c2_pins_sleep_b2: i2c2-1 { - pins { - pinmux = <STM32_PINMUX('Z', 0, ANALOG)>; /* I2C2_SCL */ - }; - }; - - i2c4_pins_a: i2c4-0 { - pins { - pinmux = <STM32_PINMUX('Z', 4, AF6)>, /* I2C4_SCL */ - <STM32_PINMUX('Z', 5, AF6)>; /* I2C4_SDA */ - bias-disable; - drive-open-drain; - slew-rate = <0>; - }; - }; - - i2c4_pins_sleep_a: i2c4-1 { - pins { - pinmux = <STM32_PINMUX('Z', 4, ANALOG)>, /* I2C4_SCL */ - <STM32_PINMUX('Z', 5, ANALOG)>; /* I2C4_SDA */ - }; - }; - - spi1_pins_a: spi1-0 { - pins1 { - pinmux = <STM32_PINMUX('Z', 0, AF5)>, /* SPI1_SCK */ - <STM32_PINMUX('Z', 2, AF5)>; /* SPI1_MOSI */ - bias-disable; - drive-push-pull; - slew-rate = <1>; - }; - - pins2 { - pinmux = <STM32_PINMUX('Z', 1, AF5)>; /* SPI1_MISO */ - bias-disable; - }; - }; - }; - }; -}; diff --git a/arch/arm/boot/dts/stm32mp157.dtsi b/arch/arm/boot/dts/stm32mp157.dtsi new file mode 100644 index 000000000000..3f0a4a91cce6 --- /dev/null +++ b/arch/arm/boot/dts/stm32mp157.dtsi @@ -0,0 +1,31 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2019 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics. + */ + +#include "stm32mp153.dtsi" + +/ { + soc { + gpu: gpu@59000000 { + compatible = "vivante,gc"; + reg = <0x59000000 0x800>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc GPU>, <&rcc GPU_K>; + clock-names = "bus" ,"core"; + resets = <&rcc GPU_R>; + status = "disabled"; + }; + + dsi: dsi@5a000000 { + compatible = "st,stm32-dsi"; + reg = <0x5a000000 0x800>; + clocks = <&rcc DSI_K>, <&clk_hse>, <&rcc DSI_PX>; + clock-names = "pclk", "ref", "px_clk"; + resets = <&rcc DSI_R>; + reset-names = "apb"; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/stm32mp157a-avenger96.dts b/arch/arm/boot/dts/stm32mp157a-avenger96.dts index 2e4742c53d04..cbfa4075907e 100644 --- a/arch/arm/boot/dts/stm32mp157a-avenger96.dts +++ b/arch/arm/boot/dts/stm32mp157a-avenger96.dts @@ -6,8 +6,9 @@ /dts-v1/; -#include "stm32mp157c.dtsi" -#include "stm32mp157xac-pinctrl.dtsi" +#include "stm32mp157.dtsi" +#include "stm32mp15-pinctrl.dtsi" +#include "stm32mp15xxac-pinctrl.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/mfd/st,stpmic1.h> @@ -252,14 +253,13 @@ regulator-name = "vbus_otg"; interrupts = <IT_OCP_OTG 0>; interrupt-parent = <&pmic>; - regulator-active-discharge; }; vbus_sw: pwr_sw2 { regulator-name = "vbus_sw"; interrupts = <IT_OCP_SWOUT 0>; interrupt-parent = <&pmic>; - regulator-active-discharge; + regulator-active-discharge = <1>; }; }; @@ -282,6 +282,11 @@ status = "okay"; }; +&pwr_regulators { + vdd-supply = <&vdd>; + vdd_3v3_usbfs-supply = <&vdd_usb>; +}; + &rng1 { status = "okay"; }; diff --git a/arch/arm/boot/dts/stm32mp157a-dk1.dts b/arch/arm/boot/dts/stm32mp157a-dk1.dts index f3f0e37aad4d..d03d4cd2606a 100644 --- a/arch/arm/boot/dts/stm32mp157a-dk1.dts +++ b/arch/arm/boot/dts/stm32mp157a-dk1.dts @@ -6,10 +6,10 @@ /dts-v1/; -#include "stm32mp157c.dtsi" -#include "stm32mp157xac-pinctrl.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/mfd/st,stpmic1.h> +#include "stm32mp157.dtsi" +#include "stm32mp15-pinctrl.dtsi" +#include "stm32mp15xxac-pinctrl.dtsi" +#include "stm32mp15xx-dkx.dtsi" / { model = "STMicroelectronics STM32MP157A-DK1 Discovery Board"; @@ -23,294 +23,4 @@ chosen { stdout-path = "serial0:115200n8"; }; - - memory@c0000000 { - reg = <0xc0000000 0x20000000>; - }; - - reserved-memory { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - gpu_reserved: gpu@d4000000 { - reg = <0xd4000000 0x4000000>; - no-map; - }; - }; - - led { - compatible = "gpio-leds"; - blue { - label = "heartbeat"; - gpios = <&gpiod 11 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - default-state = "off"; - }; - }; -}; - -&cec { - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&cec_pins_b>; - pinctrl-1 = <&cec_pins_sleep_b>; - status = "okay"; -}; - -ðernet0 { - status = "okay"; - pinctrl-0 = <ðernet0_rgmii_pins_a>; - pinctrl-1 = <ðernet0_rgmii_pins_sleep_a>; - pinctrl-names = "default", "sleep"; - phy-mode = "rgmii-id"; - max-speed = <1000>; - phy-handle = <&phy0>; - - mdio0 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "snps,dwmac-mdio"; - phy0: ethernet-phy@0 { - reg = <0>; - }; - }; -}; - -&gpu { - contiguous-area = <&gpu_reserved>; - status = "okay"; -}; - -&i2c1 { - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&i2c1_pins_a>; - pinctrl-1 = <&i2c1_pins_sleep_a>; - i2c-scl-rising-time-ns = <100>; - i2c-scl-falling-time-ns = <7>; - status = "okay"; - /delete-property/dmas; - /delete-property/dma-names; - - hdmi-transmitter@39 { - compatible = "sil,sii9022"; - reg = <0x39>; - iovcc-supply = <&v3v3_hdmi>; - cvcc12-supply = <&v1v2_hdmi>; - reset-gpios = <&gpioa 10 GPIO_ACTIVE_LOW>; - interrupts = <1 IRQ_TYPE_EDGE_FALLING>; - interrupt-parent = <&gpiog>; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <<dc_pins_a>; - pinctrl-1 = <<dc_pins_sleep_a>; - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - sii9022_in: endpoint { - remote-endpoint = <<dc_ep0_out>; - }; - }; - }; - }; -}; - -&i2c4 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c4_pins_a>; - i2c-scl-rising-time-ns = <185>; - i2c-scl-falling-time-ns = <20>; - status = "okay"; - /* spare dmas for other usage */ - /delete-property/dmas; - /delete-property/dma-names; - - pmic: stpmic@33 { - compatible = "st,stpmic1"; - reg = <0x33>; - interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>; - interrupt-controller; - #interrupt-cells = <2>; - status = "okay"; - - regulators { - compatible = "st,stpmic1-regulators"; - ldo1-supply = <&v3v3>; - ldo3-supply = <&vdd_ddr>; - ldo6-supply = <&v3v3>; - pwr_sw1-supply = <&bst_out>; - pwr_sw2-supply = <&bst_out>; - - vddcore: buck1 { - regulator-name = "vddcore"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-initial-mode = <0>; - regulator-over-current-protection; - }; - - vdd_ddr: buck2 { - regulator-name = "vdd_ddr"; - regulator-min-microvolt = <1350000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-initial-mode = <0>; - regulator-over-current-protection; - }; - - vdd: buck3 { - regulator-name = "vdd"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - st,mask-reset; - regulator-initial-mode = <0>; - regulator-over-current-protection; - }; - - v3v3: buck4 { - regulator-name = "v3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-over-current-protection; - regulator-initial-mode = <0>; - }; - - v1v8_audio: ldo1 { - regulator-name = "v1v8_audio"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - interrupts = <IT_CURLIM_LDO1 0>; - }; - - v3v3_hdmi: ldo2 { - regulator-name = "v3v3_hdmi"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - interrupts = <IT_CURLIM_LDO2 0>; - }; - - vtt_ddr: ldo3 { - regulator-name = "vtt_ddr"; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <750000>; - regulator-always-on; - regulator-over-current-protection; - }; - - vdd_usb: ldo4 { - regulator-name = "vdd_usb"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - interrupts = <IT_CURLIM_LDO4 0>; - }; - - vdda: ldo5 { - regulator-name = "vdda"; - regulator-min-microvolt = <2900000>; - regulator-max-microvolt = <2900000>; - interrupts = <IT_CURLIM_LDO5 0>; - regulator-boot-on; - }; - - v1v2_hdmi: ldo6 { - regulator-name = "v1v2_hdmi"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - interrupts = <IT_CURLIM_LDO6 0>; - }; - - vref_ddr: vref_ddr { - regulator-name = "vref_ddr"; - regulator-always-on; - regulator-over-current-protection; - }; - - bst_out: boost { - regulator-name = "bst_out"; - interrupts = <IT_OCP_BOOST 0>; - }; - - vbus_otg: pwr_sw1 { - regulator-name = "vbus_otg"; - interrupts = <IT_OCP_OTG 0>; - }; - - vbus_sw: pwr_sw2 { - regulator-name = "vbus_sw"; - interrupts = <IT_OCP_SWOUT 0>; - regulator-active-discharge; - }; - }; - - onkey { - compatible = "st,stpmic1-onkey"; - interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 0>; - interrupt-names = "onkey-falling", "onkey-rising"; - power-off-time-sec = <10>; - status = "okay"; - }; - - watchdog { - compatible = "st,stpmic1-wdt"; - status = "disabled"; - }; - }; -}; - -&ipcc { - status = "okay"; -}; - -&iwdg2 { - timeout-sec = <32>; - status = "okay"; -}; - -<dc { - status = "okay"; - - port { - #address-cells = <1>; - #size-cells = <0>; - - ltdc_ep0_out: endpoint@0 { - reg = <0>; - remote-endpoint = <&sii9022_in>; - }; - }; -}; - -&rng1 { - status = "okay"; -}; - -&rtc { - status = "okay"; -}; - -&sdmmc1 { - pinctrl-names = "default", "opendrain", "sleep"; - pinctrl-0 = <&sdmmc1_b4_pins_a>; - pinctrl-1 = <&sdmmc1_b4_od_pins_a>; - pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>; - broken-cd; - st,neg-edge; - bus-width = <4>; - vmmc-supply = <&v3v3>; - status = "okay"; -}; - -&uart4 { - pinctrl-names = "default"; - pinctrl-0 = <&uart4_pins_a>; - status = "okay"; }; diff --git a/arch/arm/boot/dts/stm32mp157c-dk2.dts b/arch/arm/boot/dts/stm32mp157c-dk2.dts index 20ea601a546d..7985b80967ca 100644 --- a/arch/arm/boot/dts/stm32mp157c-dk2.dts +++ b/arch/arm/boot/dts/stm32mp157c-dk2.dts @@ -6,18 +6,23 @@ /dts-v1/; -#include "stm32mp157a-dk1.dts" +#include "stm32mp157.dtsi" +#include "stm32mp15xc.dtsi" +#include "stm32mp15-pinctrl.dtsi" +#include "stm32mp15xxac-pinctrl.dtsi" +#include "stm32mp15xx-dkx.dtsi" / { model = "STMicroelectronics STM32MP157C-DK2 Discovery Board"; compatible = "st,stm32mp157c-dk2", "st,stm32mp157"; - reg18: reg18 { - compatible = "regulator-fixed"; - regulator-name = "reg18"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; + aliases { + ethernet0 = ðernet0; + serial0 = &uart4; + }; + + chosen { + stdout-path = "serial0:115200n8"; }; }; @@ -61,6 +66,19 @@ }; }; +&i2c1 { + touchscreen@38 { + compatible = "focaltech,ft6236"; + reg = <0x38>; + interrupts = <2 2>; + interrupt-parent = <&gpiof>; + interrupt-controller; + touchscreen-size-x = <480>; + touchscreen-size-y = <800>; + status = "okay"; + }; +}; + <dc { status = "okay"; diff --git a/arch/arm/boot/dts/stm32mp157c-ed1.dts b/arch/arm/boot/dts/stm32mp157c-ed1.dts index 4fe7f71a74d3..1fc43251d697 100644 --- a/arch/arm/boot/dts/stm32mp157c-ed1.dts +++ b/arch/arm/boot/dts/stm32mp157c-ed1.dts @@ -5,8 +5,10 @@ */ /dts-v1/; -#include "stm32mp157c.dtsi" -#include "stm32mp157xaa-pinctrl.dtsi" +#include "stm32mp157.dtsi" +#include "stm32mp15xc.dtsi" +#include "stm32mp15-pinctrl.dtsi" +#include "stm32mp15xxaa-pinctrl.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/mfd/st,stpmic1.h> @@ -28,6 +30,42 @@ #size-cells = <1>; ranges; + mcuram2: mcuram2@10000000 { + compatible = "shared-dma-pool"; + reg = <0x10000000 0x40000>; + no-map; + }; + + vdev0vring0: vdev0vring0@10040000 { + compatible = "shared-dma-pool"; + reg = <0x10040000 0x1000>; + no-map; + }; + + vdev0vring1: vdev0vring1@10041000 { + compatible = "shared-dma-pool"; + reg = <0x10041000 0x1000>; + no-map; + }; + + vdev0buffer: vdev0buffer@10042000 { + compatible = "shared-dma-pool"; + reg = <0x10042000 0x4000>; + no-map; + }; + + mcuram: mcuram@30000000 { + compatible = "shared-dma-pool"; + reg = <0x30000000 0x40000>; + no-map; + }; + + retram: retram@38000000 { + compatible = "shared-dma-pool"; + reg = <0x38000000 0x10000>; + no-map; + }; + gpu_reserved: gpu@e8000000 { reg = <0xe8000000 0x8000000>; no-map; @@ -38,22 +76,6 @@ serial0 = &uart4; }; - reg11: reg11 { - compatible = "regulator-fixed"; - regulator-name = "reg11"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - }; - - reg18: reg18 { - compatible = "regulator-fixed"; - regulator-name = "reg18"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - sd_switch: regulator-sd_switch { compatible = "regulator-gpio"; regulator-name = "sd_switch"; @@ -64,7 +86,37 @@ gpios = <&gpiof 14 GPIO_ACTIVE_HIGH>; gpios-states = <0>; - states = <1800000 0x1 2900000 0x0>; + states = <1800000 0x1>, + <2900000 0x0>; + }; +}; + +&adc { + /* ANA0, ANA1 are dedicated pins and don't need pinctrl: only in6. */ + pinctrl-0 = <&adc1_in6_pins_a>; + pinctrl-names = "default"; + vdd-supply = <&vdd>; + vdda-supply = <&vdda>; + vref-supply = <&vdda>; + status = "disabled"; + adc1: adc@0 { + st,adc-channels = <0 1 6>; + /* 16.5 ck_cycles sampling time */ + st,min-sample-time-nsecs = <400>; + status = "okay"; + }; +}; + +&dac { + pinctrl-names = "default"; + pinctrl-0 = <&dac_ch1_pins_a &dac_ch2_pins_a>; + vref-supply = <&vdda>; + status = "disabled"; + dac1: dac@1 { + status = "okay"; + }; + dac2: dac@2 { + status = "okay"; }; }; @@ -107,7 +159,7 @@ vddcore: buck1 { regulator-name = "vddcore"; - regulator-min-microvolt = <800000>; + regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1350000>; regulator-always-on; regulator-initial-mode = <0>; @@ -205,7 +257,7 @@ vbus_sw: pwr_sw2 { regulator-name = "vbus_sw"; interrupts = <IT_OCP_SWOUT 0>; - regulator-active-discharge; + regulator-active-discharge = <1>; }; }; @@ -233,6 +285,21 @@ status = "okay"; }; +&m4_rproc { + memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>, + <&vdev0vring1>, <&vdev0buffer>; + mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>; + mbox-names = "vq0", "vq1", "shutdown"; + interrupt-parent = <&exti>; + interrupts = <68 1>; + status = "okay"; +}; + +&pwr_regulators { + vdd-supply = <&vdd>; + vdd_3v3_usbfs-supply = <&vdd_usb>; +}; + &rng1 { status = "okay"; }; @@ -256,6 +323,22 @@ status = "okay"; }; +&sdmmc2 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_a>; + pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_a>; + pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_a>; + non-removable; + no-sd; + no-sdio; + st,neg-edge; + bus-width = <8>; + vmmc-supply = <&v3v3>; + vqmmc-supply = <&v3v3>; + mmc-ddr-3_3v; + status = "okay"; +}; + &timers6 { status = "okay"; /* spare dmas for other usage */ diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts index feb8f7727270..228e35e16884 100644 --- a/arch/arm/boot/dts/stm32mp157c-ev1.dts +++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts @@ -32,7 +32,6 @@ joystick { compatible = "gpio-keys"; - #size-cells = <0>; pinctrl-0 = <&joystick_pins>; pinctrl-names = "default"; button-0 { @@ -101,6 +100,7 @@ &dsi { #address-cells = <1>; #size-cells = <0>; + phy-dsi-supply = <®18>; status = "okay"; ports { @@ -157,6 +157,22 @@ }; }; +&fmc { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&fmc_pins_a>; + pinctrl-1 = <&fmc_sleep_pins_a>; + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + nand@0 { + reg = <0>; + nand-on-flash-bbt; + #address-cells = <1>; + #size-cells = <1>; + }; +}; + &i2c2 { pinctrl-names = "default"; pinctrl-0 = <&i2c2_pins_a>; @@ -166,14 +182,12 @@ ov5640: camera@3c { compatible = "ovti,ov5640"; - pinctrl-names = "default"; - pinctrl-0 = <&ov5640_pins>; reg = <0x3c>; clocks = <&clk_ext_camera>; clock-names = "xclk"; DOVDD-supply = <&v2v8>; - powerdown-gpios = <&stmfx_pinctrl 18 GPIO_ACTIVE_HIGH>; - reset-gpios = <&stmfx_pinctrl 19 GPIO_ACTIVE_LOW>; + powerdown-gpios = <&stmfx_pinctrl 18 (GPIO_ACTIVE_HIGH | GPIO_PUSH_PULL)>; + reset-gpios = <&stmfx_pinctrl 19 (GPIO_ACTIVE_LOW | GPIO_PUSH_PULL)>; rotation = <180>; status = "okay"; @@ -206,15 +220,8 @@ joystick_pins: joystick { pins = "gpio0", "gpio1", "gpio2", "gpio3", "gpio4"; - drive-push-pull; bias-pull-down; }; - - ov5640_pins: camera { - pins = "agpio2", "agpio3"; /* stmfx pins 18 & 19 */ - drive-push-pull; - output-low; - }; }; }; }; @@ -276,6 +283,18 @@ }; }; +&sdmmc3 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc3_b4_pins_a>; + pinctrl-1 = <&sdmmc3_b4_od_pins_a>; + pinctrl-2 = <&sdmmc3_b4_sleep_pins_a>; + broken-cd; + st,neg-edge; + bus-width = <4>; + vmmc-supply = <&v3v3>; + status = "disabled"; +}; + &spi1 { pinctrl-names = "default"; pinctrl-0 = <&spi1_pins_a>; @@ -289,7 +308,8 @@ status = "disabled"; pwm { pinctrl-0 = <&pwm2_pins_a>; - pinctrl-names = "default"; + pinctrl-1 = <&pwm2_sleep_pins_a>; + pinctrl-names = "default", "sleep"; status = "okay"; }; timer@1 { @@ -303,7 +323,8 @@ status = "disabled"; pwm { pinctrl-0 = <&pwm8_pins_a>; - pinctrl-names = "default"; + pinctrl-1 = <&pwm8_sleep_pins_a>; + pinctrl-names = "default", "sleep"; status = "okay"; }; timer@7 { @@ -317,7 +338,8 @@ status = "disabled"; pwm { pinctrl-0 = <&pwm12_pins_a>; - pinctrl-names = "default"; + pinctrl-1 = <&pwm12_sleep_pins_a>; + pinctrl-names = "default", "sleep"; status = "okay"; }; timer@11 { @@ -327,7 +349,6 @@ &usbh_ehci { phys = <&usbphyc_port0>; - phy-names = "usb"; status = "okay"; }; diff --git a/arch/arm/boot/dts/stm32mp157xaa-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157xaa-pinctrl.dtsi deleted file mode 100644 index 875adf5e1e30..000000000000 --- a/arch/arm/boot/dts/stm32mp157xaa-pinctrl.dtsi +++ /dev/null @@ -1,90 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) -/* - * Copyright (C) STMicroelectronics 2019 - All Rights Reserved - * Author: Alexandre Torgue <alexandre.torgue@st.com> - */ - -#include "stm32mp157-pinctrl.dtsi" -/ { - soc { - pinctrl: pin-controller@50002000 { - st,package = <STM32MP_PKG_AA>; - - gpioa: gpio@50002000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 0 16>; - }; - - gpiob: gpio@50003000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 16 16>; - }; - - gpioc: gpio@50004000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 32 16>; - }; - - gpiod: gpio@50005000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 48 16>; - }; - - gpioe: gpio@50006000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 64 16>; - }; - - gpiof: gpio@50007000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 80 16>; - }; - - gpiog: gpio@50008000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 96 16>; - }; - - gpioh: gpio@50009000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 112 16>; - }; - - gpioi: gpio@5000a000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 128 16>; - }; - - gpioj: gpio@5000b000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 144 16>; - }; - - gpiok: gpio@5000c000 { - status = "okay"; - ngpios = <8>; - gpio-ranges = <&pinctrl 0 160 8>; - }; - }; - - pinctrl_z: pin-controller-z@54004000 { - st,package = <STM32MP_PKG_AA>; - - gpioz: gpio@54004000 { - status = "okay"; - ngpios = <8>; - gpio-ranges = <&pinctrl_z 0 400 8>; - }; - }; - }; -}; diff --git a/arch/arm/boot/dts/stm32mp157xab-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157xab-pinctrl.dtsi deleted file mode 100644 index 961fa12a59c3..000000000000 --- a/arch/arm/boot/dts/stm32mp157xab-pinctrl.dtsi +++ /dev/null @@ -1,62 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) -/* - * Copyright (C) STMicroelectronics 2019 - All Rights Reserved - * Author: Alexandre Torgue <alexandre.torgue@st.com> - */ - -#include "stm32mp157-pinctrl.dtsi" -/ { - soc { - pinctrl: pin-controller@50002000 { - st,package = <STM32MP_PKG_AB>; - - gpioa: gpio@50002000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 0 16>; - }; - - gpiob: gpio@50003000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 16 16>; - }; - - gpioc: gpio@50004000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 32 16>; - }; - - gpiod: gpio@50005000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 48 16>; - }; - - gpioe: gpio@50006000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 64 16>; - }; - - gpiof: gpio@50007000 { - status = "okay"; - ngpios = <6>; - gpio-ranges = <&pinctrl 6 86 6>; - }; - - gpiog: gpio@50008000 { - status = "okay"; - ngpios = <10>; - gpio-ranges = <&pinctrl 6 102 10>; - }; - - gpioh: gpio@50009000 { - status = "okay"; - ngpios = <2>; - gpio-ranges = <&pinctrl 0 112 2>; - }; - }; - }; -}; diff --git a/arch/arm/boot/dts/stm32mp157xac-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157xac-pinctrl.dtsi deleted file mode 100644 index 26600f188d25..000000000000 --- a/arch/arm/boot/dts/stm32mp157xac-pinctrl.dtsi +++ /dev/null @@ -1,78 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) -/* - * Copyright (C) STMicroelectronics 2019 - All Rights Reserved - * Author: Alexandre Torgue <alexandre.torgue@st.com> - */ - -#include "stm32mp157-pinctrl.dtsi" -/ { - soc { - pinctrl: pin-controller@50002000 { - st,package = <STM32MP_PKG_AC>; - - gpioa: gpio@50002000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 0 16>; - }; - - gpiob: gpio@50003000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 16 16>; - }; - - gpioc: gpio@50004000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 32 16>; - }; - - gpiod: gpio@50005000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 48 16>; - }; - - gpioe: gpio@50006000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 64 16>; - }; - - gpiof: gpio@50007000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 80 16>; - }; - - gpiog: gpio@50008000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 96 16>; - }; - - gpioh: gpio@50009000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 112 16>; - }; - - gpioi: gpio@5000a000 { - status = "okay"; - ngpios = <12>; - gpio-ranges = <&pinctrl 0 128 12>; - }; - }; - - pinctrl_z: pin-controller-z@54004000 { - st,package = <STM32MP_PKG_AC>; - - gpioz: gpio@54004000 { - status = "okay"; - ngpios = <8>; - gpio-ranges = <&pinctrl_z 0 400 8>; - }; - }; - }; -}; diff --git a/arch/arm/boot/dts/stm32mp157xad-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157xad-pinctrl.dtsi deleted file mode 100644 index 910113f3e69a..000000000000 --- a/arch/arm/boot/dts/stm32mp157xad-pinctrl.dtsi +++ /dev/null @@ -1,62 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) -/* - * Copyright (C) STMicroelectronics 2019 - All Rights Reserved - * Author: Alexandre Torgue <alexandre.torgue@st.com> - */ - -#include "stm32mp157-pinctrl.dtsi" -/ { - soc { - pinctrl: pin-controller@50002000 { - st,package = <STM32MP_PKG_AD>; - - gpioa: gpio@50002000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 0 16>; - }; - - gpiob: gpio@50003000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 16 16>; - }; - - gpioc: gpio@50004000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 32 16>; - }; - - gpiod: gpio@50005000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 48 16>; - }; - - gpioe: gpio@50006000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 64 16>; - }; - - gpiof: gpio@50007000 { - status = "okay"; - ngpios = <6>; - gpio-ranges = <&pinctrl 6 86 6>; - }; - - gpiog: gpio@50008000 { - status = "okay"; - ngpios = <10>; - gpio-ranges = <&pinctrl 6 102 10>; - }; - - gpioh: gpio@50009000 { - status = "okay"; - ngpios = <2>; - gpio-ranges = <&pinctrl 0 112 2>; - }; - }; - }; -}; diff --git a/arch/arm/boot/dts/stm32mp15xc.dtsi b/arch/arm/boot/dts/stm32mp15xc.dtsi new file mode 100644 index 000000000000..b06a55a2fa18 --- /dev/null +++ b/arch/arm/boot/dts/stm32mp15xc.dtsi @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2019 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics. + */ + +/ { + soc { + cryp1: cryp@54001000 { + compatible = "st,stm32mp1-cryp"; + reg = <0x54001000 0x400>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc CRYP1>; + resets = <&rcc CRYP1_R>; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi new file mode 100644 index 000000000000..f6672e87aef3 --- /dev/null +++ b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi @@ -0,0 +1,625 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2019 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/mfd/st,stpmic1.h> + +/ { + memory@c0000000 { + device_type = "memory"; + reg = <0xc0000000 0x20000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + mcuram2: mcuram2@10000000 { + compatible = "shared-dma-pool"; + reg = <0x10000000 0x40000>; + no-map; + }; + + vdev0vring0: vdev0vring0@10040000 { + compatible = "shared-dma-pool"; + reg = <0x10040000 0x1000>; + no-map; + }; + + vdev0vring1: vdev0vring1@10041000 { + compatible = "shared-dma-pool"; + reg = <0x10041000 0x1000>; + no-map; + }; + + vdev0buffer: vdev0buffer@10042000 { + compatible = "shared-dma-pool"; + reg = <0x10042000 0x4000>; + no-map; + }; + + mcuram: mcuram@30000000 { + compatible = "shared-dma-pool"; + reg = <0x30000000 0x40000>; + no-map; + }; + + retram: retram@38000000 { + compatible = "shared-dma-pool"; + reg = <0x38000000 0x10000>; + no-map; + }; + + gpu_reserved: gpu@d4000000 { + reg = <0xd4000000 0x4000000>; + no-map; + }; + }; + + led { + compatible = "gpio-leds"; + blue { + label = "heartbeat"; + gpios = <&gpiod 11 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + }; + + sound { + compatible = "audio-graph-card"; + label = "STM32MP1-DK"; + routing = + "Playback" , "MCLK", + "Capture" , "MCLK", + "MICL" , "Mic Bias"; + dais = <&sai2a_port &sai2b_port &i2s2_port>; + status = "okay"; + }; +}; + +&adc { + pinctrl-names = "default"; + pinctrl-0 = <&adc12_ain_pins_a>, <&adc12_usb_cc_pins_a>; + vdd-supply = <&vdd>; + vdda-supply = <&vdd>; + vref-supply = <&vrefbuf>; + status = "disabled"; + adc1: adc@0 { + /* + * Type-C USB_PWR_CC1 & USB_PWR_CC2 on in18 & in19. + * Use at least 5 * RC time, e.g. 5 * (Rp + Rd) * C: + * 5 * (56 + 47kOhms) * 5pF => 2.5us. + * Use arbitrary margin here (e.g. 5us). + */ + st,min-sample-time-nsecs = <5000>; + /* AIN connector, USB Type-C CC1 & CC2 */ + st,adc-channels = <0 1 6 13 18 19>; + status = "okay"; + }; + adc2: adc@100 { + /* AIN connector, USB Type-C CC1 & CC2 */ + st,adc-channels = <0 1 2 6 18 19>; + st,min-sample-time-nsecs = <5000>; + status = "okay"; + }; +}; + +&cec { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cec_pins_b>; + pinctrl-1 = <&cec_pins_sleep_b>; + status = "okay"; +}; + +ðernet0 { + status = "okay"; + pinctrl-0 = <ðernet0_rgmii_pins_a>; + pinctrl-1 = <ðernet0_rgmii_pins_sleep_a>; + pinctrl-names = "default", "sleep"; + phy-mode = "rgmii-id"; + max-speed = <1000>; + phy-handle = <&phy0>; + + mdio0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + phy0: ethernet-phy@0 { + reg = <0>; + }; + }; +}; + +&gpu { + contiguous-area = <&gpu_reserved>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c1_pins_a>; + pinctrl-1 = <&i2c1_pins_sleep_a>; + i2c-scl-rising-time-ns = <100>; + i2c-scl-falling-time-ns = <7>; + status = "okay"; + /delete-property/dmas; + /delete-property/dma-names; + + hdmi-transmitter@39 { + compatible = "sil,sii9022"; + reg = <0x39>; + iovcc-supply = <&v3v3_hdmi>; + cvcc12-supply = <&v1v2_hdmi>; + reset-gpios = <&gpioa 10 GPIO_ACTIVE_LOW>; + interrupts = <1 IRQ_TYPE_EDGE_FALLING>; + interrupt-parent = <&gpiog>; + #sound-dai-cells = <0>; + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + sii9022_in: endpoint { + remote-endpoint = <<dc_ep0_out>; + }; + }; + + port@3 { + reg = <3>; + sii9022_tx_endpoint: endpoint { + remote-endpoint = <&i2s2_endpoint>; + }; + }; + }; + }; + + cs42l51: cs42l51@4a { + compatible = "cirrus,cs42l51"; + reg = <0x4a>; + #sound-dai-cells = <0>; + VL-supply = <&v3v3>; + VD-supply = <&v1v8_audio>; + VA-supply = <&v1v8_audio>; + VAHP-supply = <&v1v8_audio>; + reset-gpios = <&gpiog 9 GPIO_ACTIVE_LOW>; + clocks = <&sai2a>; + clock-names = "MCLK"; + status = "okay"; + + cs42l51_port: port { + #address-cells = <1>; + #size-cells = <0>; + + cs42l51_tx_endpoint: endpoint@0 { + reg = <0>; + remote-endpoint = <&sai2a_endpoint>; + frame-master; + bitclock-master; + }; + + cs42l51_rx_endpoint: endpoint@1 { + reg = <1>; + remote-endpoint = <&sai2b_endpoint>; + frame-master; + bitclock-master; + }; + }; + }; +}; + +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_pins_a>; + i2c-scl-rising-time-ns = <185>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; + /* spare dmas for other usage */ + /delete-property/dmas; + /delete-property/dma-names; + + pmic: stpmic@33 { + compatible = "st,stpmic1"; + reg = <0x33>; + interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + status = "okay"; + + regulators { + compatible = "st,stpmic1-regulators"; + ldo1-supply = <&v3v3>; + ldo3-supply = <&vdd_ddr>; + ldo6-supply = <&v3v3>; + pwr_sw1-supply = <&bst_out>; + pwr_sw2-supply = <&bst_out>; + + vddcore: buck1 { + regulator-name = "vddcore"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + vdd_ddr: buck2 { + regulator-name = "vdd_ddr"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + vdd: buck3 { + regulator-name = "vdd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + st,mask-reset; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + v3v3: buck4 { + regulator-name = "v3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-over-current-protection; + regulator-initial-mode = <0>; + }; + + v1v8_audio: ldo1 { + regulator-name = "v1v8_audio"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + interrupts = <IT_CURLIM_LDO1 0>; + }; + + v3v3_hdmi: ldo2 { + regulator-name = "v3v3_hdmi"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + interrupts = <IT_CURLIM_LDO2 0>; + }; + + vtt_ddr: ldo3 { + regulator-name = "vtt_ddr"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <750000>; + regulator-always-on; + regulator-over-current-protection; + }; + + vdd_usb: ldo4 { + regulator-name = "vdd_usb"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + interrupts = <IT_CURLIM_LDO4 0>; + }; + + vdda: ldo5 { + regulator-name = "vdda"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + interrupts = <IT_CURLIM_LDO5 0>; + regulator-boot-on; + }; + + v1v2_hdmi: ldo6 { + regulator-name = "v1v2_hdmi"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + interrupts = <IT_CURLIM_LDO6 0>; + }; + + vref_ddr: vref_ddr { + regulator-name = "vref_ddr"; + regulator-always-on; + regulator-over-current-protection; + }; + + bst_out: boost { + regulator-name = "bst_out"; + interrupts = <IT_OCP_BOOST 0>; + }; + + vbus_otg: pwr_sw1 { + regulator-name = "vbus_otg"; + interrupts = <IT_OCP_OTG 0>; + }; + + vbus_sw: pwr_sw2 { + regulator-name = "vbus_sw"; + interrupts = <IT_OCP_SWOUT 0>; + regulator-active-discharge = <1>; + }; + }; + + onkey { + compatible = "st,stpmic1-onkey"; + interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 0>; + interrupt-names = "onkey-falling", "onkey-rising"; + power-off-time-sec = <10>; + status = "okay"; + }; + + watchdog { + compatible = "st,stpmic1-wdt"; + status = "disabled"; + }; + }; +}; + +&i2s2 { + clocks = <&rcc SPI2>, <&rcc SPI2_K>, <&rcc PLL3_Q>, <&rcc PLL3_R>; + clock-names = "pclk", "i2sclk", "x8k", "x11k"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2s2_pins_a>; + pinctrl-1 = <&i2s2_pins_sleep_a>; + status = "okay"; + + i2s2_port: port { + i2s2_endpoint: endpoint { + remote-endpoint = <&sii9022_tx_endpoint>; + format = "i2s"; + mclk-fs = <256>; + }; + }; +}; + +&ipcc { + status = "okay"; +}; + +&iwdg2 { + timeout-sec = <32>; + status = "okay"; +}; + +<dc { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <<dc_pins_a>; + pinctrl-1 = <<dc_pins_sleep_a>; + status = "okay"; + + port { + #address-cells = <1>; + #size-cells = <0>; + + ltdc_ep0_out: endpoint@0 { + reg = <0>; + remote-endpoint = <&sii9022_in>; + }; + }; +}; + +&m4_rproc { + memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>, + <&vdev0vring1>, <&vdev0buffer>; + mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>; + mbox-names = "vq0", "vq1", "shutdown"; + interrupt-parent = <&exti>; + interrupts = <68 1>; + status = "okay"; +}; + +&pwr_regulators { + vdd-supply = <&vdd>; + vdd_3v3_usbfs-supply = <&vdd_usb>; +}; + +&rng1 { + status = "okay"; +}; + +&rtc { + status = "okay"; +}; + +&sai2 { + clocks = <&rcc SAI2>, <&rcc PLL3_Q>, <&rcc PLL3_R>; + clock-names = "pclk", "x8k", "x11k"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sai2a_pins_a>, <&sai2b_pins_b>; + pinctrl-1 = <&sai2a_sleep_pins_a>, <&sai2b_sleep_pins_b>; + status = "okay"; + + sai2a: audio-controller@4400b004 { + #clock-cells = <0>; + dma-names = "tx"; + clocks = <&rcc SAI2_K>; + clock-names = "sai_ck"; + status = "okay"; + + sai2a_port: port { + sai2a_endpoint: endpoint { + remote-endpoint = <&cs42l51_tx_endpoint>; + format = "i2s"; + mclk-fs = <256>; + dai-tdm-slot-num = <2>; + dai-tdm-slot-width = <32>; + }; + }; + }; + + sai2b: audio-controller@4400b024 { + dma-names = "rx"; + st,sync = <&sai2a 2>; + clocks = <&rcc SAI2_K>, <&sai2a>; + clock-names = "sai_ck", "MCLK"; + status = "okay"; + + sai2b_port: port { + sai2b_endpoint: endpoint { + remote-endpoint = <&cs42l51_rx_endpoint>; + format = "i2s"; + mclk-fs = <256>; + dai-tdm-slot-num = <2>; + dai-tdm-slot-width = <32>; + }; + }; + }; +}; + +&sdmmc1 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc1_b4_pins_a>; + pinctrl-1 = <&sdmmc1_b4_od_pins_a>; + pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>; + broken-cd; + st,neg-edge; + bus-width = <4>; + vmmc-supply = <&v3v3>; + status = "okay"; +}; + +&sdmmc3 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc3_b4_pins_a>; + pinctrl-1 = <&sdmmc3_b4_od_pins_a>; + pinctrl-2 = <&sdmmc3_b4_sleep_pins_a>; + broken-cd; + st,neg-edge; + bus-width = <4>; + vmmc-supply = <&v3v3>; + status = "disabled"; +}; + +&timers1 { + /* spare dmas for other usage */ + /delete-property/dmas; + /delete-property/dma-names; + status = "disabled"; + pwm { + pinctrl-0 = <&pwm1_pins_a>; + pinctrl-1 = <&pwm1_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + status = "okay"; + }; + timer@0 { + status = "okay"; + }; +}; + +&timers3 { + /delete-property/dmas; + /delete-property/dma-names; + status = "disabled"; + pwm { + pinctrl-0 = <&pwm3_pins_a>; + pinctrl-1 = <&pwm3_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + status = "okay"; + }; + timer@2 { + status = "okay"; + }; +}; + +&timers4 { + /delete-property/dmas; + /delete-property/dma-names; + status = "disabled"; + pwm { + pinctrl-0 = <&pwm4_pins_a &pwm4_pins_b>; + pinctrl-1 = <&pwm4_sleep_pins_a &pwm4_sleep_pins_b>; + pinctrl-names = "default", "sleep"; + status = "okay"; + }; + timer@3 { + status = "okay"; + }; +}; + +&timers5 { + /delete-property/dmas; + /delete-property/dma-names; + status = "disabled"; + pwm { + pinctrl-0 = <&pwm5_pins_a>; + pinctrl-1 = <&pwm5_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + status = "okay"; + }; + timer@4 { + status = "okay"; + }; +}; + +&timers6 { + /delete-property/dmas; + /delete-property/dma-names; + status = "disabled"; + timer@5 { + status = "okay"; + }; +}; + +&timers12 { + /delete-property/dmas; + /delete-property/dma-names; + status = "disabled"; + pwm { + pinctrl-0 = <&pwm12_pins_a>; + pinctrl-1 = <&pwm12_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + status = "okay"; + }; + timer@11 { + status = "okay"; + }; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins_a>; + status = "okay"; +}; + +&usbh_ehci { + phys = <&usbphyc_port0>; + status = "okay"; +}; + +&usbotg_hs { + dr_mode = "peripheral"; + phys = <&usbphyc_port1 0>; + phy-names = "usb2-phy"; + status = "okay"; +}; + +&usbphyc { + status = "okay"; +}; + +&usbphyc_port0 { + phy-supply = <&vdd_usb>; + vdda1v1-supply = <®11>; + vdda1v8-supply = <®18>; +}; + +&usbphyc_port1 { + phy-supply = <&vdd_usb>; + vdda1v1-supply = <®11>; + vdda1v8-supply = <®18>; +}; + +&vrefbuf { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + vdda-supply = <&vdd>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/stm32mp15xxaa-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15xxaa-pinctrl.dtsi new file mode 100644 index 000000000000..04f7a43ad66f --- /dev/null +++ b/arch/arm/boot/dts/stm32mp15xxaa-pinctrl.dtsi @@ -0,0 +1,85 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2019 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics. + */ + +&pinctrl { + st,package = <STM32MP_PKG_AA>; + + gpioa: gpio@50002000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 0 16>; + }; + + gpiob: gpio@50003000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 16 16>; + }; + + gpioc: gpio@50004000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 32 16>; + }; + + gpiod: gpio@50005000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 48 16>; + }; + + gpioe: gpio@50006000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 64 16>; + }; + + gpiof: gpio@50007000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 80 16>; + }; + + gpiog: gpio@50008000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 96 16>; + }; + + gpioh: gpio@50009000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 112 16>; + }; + + gpioi: gpio@5000a000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 128 16>; + }; + + gpioj: gpio@5000b000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 144 16>; + }; + + gpiok: gpio@5000c000 { + status = "okay"; + ngpios = <8>; + gpio-ranges = <&pinctrl 0 160 8>; + }; +}; + +&pinctrl_z { + st,package = <STM32MP_PKG_AA>; + + gpioz: gpio@54004000 { + status = "okay"; + ngpios = <8>; + gpio-ranges = <&pinctrl_z 0 400 8>; + }; +}; diff --git a/arch/arm/boot/dts/stm32mp15xxab-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15xxab-pinctrl.dtsi new file mode 100644 index 000000000000..328dad140e9b --- /dev/null +++ b/arch/arm/boot/dts/stm32mp15xxab-pinctrl.dtsi @@ -0,0 +1,57 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2019 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics. + */ + +&pinctrl { + st,package = <STM32MP_PKG_AB>; + + gpioa: gpio@50002000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 0 16>; + }; + + gpiob: gpio@50003000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 16 16>; + }; + + gpioc: gpio@50004000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 32 16>; + }; + + gpiod: gpio@50005000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 48 16>; + }; + + gpioe: gpio@50006000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 64 16>; + }; + + gpiof: gpio@50007000 { + status = "okay"; + ngpios = <6>; + gpio-ranges = <&pinctrl 6 86 6>; + }; + + gpiog: gpio@50008000 { + status = "okay"; + ngpios = <10>; + gpio-ranges = <&pinctrl 6 102 10>; + }; + + gpioh: gpio@50009000 { + status = "okay"; + ngpios = <2>; + gpio-ranges = <&pinctrl 0 112 2>; + }; +}; diff --git a/arch/arm/boot/dts/stm32mp15xxac-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15xxac-pinctrl.dtsi new file mode 100644 index 000000000000..7eaa245f44db --- /dev/null +++ b/arch/arm/boot/dts/stm32mp15xxac-pinctrl.dtsi @@ -0,0 +1,73 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2019 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics. + */ + +&pinctrl { + st,package = <STM32MP_PKG_AC>; + + gpioa: gpio@50002000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 0 16>; + }; + + gpiob: gpio@50003000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 16 16>; + }; + + gpioc: gpio@50004000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 32 16>; + }; + + gpiod: gpio@50005000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 48 16>; + }; + + gpioe: gpio@50006000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 64 16>; + }; + + gpiof: gpio@50007000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 80 16>; + }; + + gpiog: gpio@50008000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 96 16>; + }; + + gpioh: gpio@50009000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 112 16>; + }; + + gpioi: gpio@5000a000 { + status = "okay"; + ngpios = <12>; + gpio-ranges = <&pinctrl 0 128 12>; + }; +}; + +&pinctrl_z { + st,package = <STM32MP_PKG_AC>; + + gpioz: gpio@54004000 { + status = "okay"; + ngpios = <8>; + gpio-ranges = <&pinctrl_z 0 400 8>; + }; +}; diff --git a/arch/arm/boot/dts/stm32mp15xxad-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15xxad-pinctrl.dtsi new file mode 100644 index 000000000000..b63e207de216 --- /dev/null +++ b/arch/arm/boot/dts/stm32mp15xxad-pinctrl.dtsi @@ -0,0 +1,57 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2019 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics. + */ + +&pinctrl { + st,package = <STM32MP_PKG_AD>; + + gpioa: gpio@50002000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 0 16>; + }; + + gpiob: gpio@50003000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 16 16>; + }; + + gpioc: gpio@50004000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 32 16>; + }; + + gpiod: gpio@50005000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 48 16>; + }; + + gpioe: gpio@50006000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 64 16>; + }; + + gpiof: gpio@50007000 { + status = "okay"; + ngpios = <6>; + gpio-ranges = <&pinctrl 6 86 6>; + }; + + gpiog: gpio@50008000 { + status = "okay"; + ngpios = <10>; + gpio-ranges = <&pinctrl 6 102 10>; + }; + + gpioh: gpio@50009000 { + status = "okay"; + ngpios = <2>; + gpio-ranges = <&pinctrl 0 112 2>; + }; +}; diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/sun4i-a10-a1000.dts index 6c254ec4c85b..8692b11a83c3 100644 --- a/arch/arm/boot/dts/sun4i-a10-a1000.dts +++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts @@ -125,7 +125,7 @@ }; &emac { - phy = <&phy1>; + phy-handle = <&phy1>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts b/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts index 38a2c4134952..816d534ac093 100644 --- a/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts +++ b/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts @@ -68,7 +68,7 @@ }; &emac { - phy = <&phy1>; + phy-handle = <&phy1>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts index 7306c65df88a..6ca02e824acc 100644 --- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts +++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts @@ -114,7 +114,7 @@ }; &emac { - phy = <&phy1>; + phy-handle = <&phy1>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-hackberry.dts b/arch/arm/boot/dts/sun4i-a10-hackberry.dts index cc988ccd5ca7..47dea0922501 100644 --- a/arch/arm/boot/dts/sun4i-a10-hackberry.dts +++ b/arch/arm/boot/dts/sun4i-a10-hackberry.dts @@ -80,7 +80,7 @@ }; &emac { - phy = <&phy0>; + phy-handle = <&phy0>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts b/arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts index 80ecd78247ac..d4e319d16aae 100644 --- a/arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts +++ b/arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts @@ -58,7 +58,7 @@ &emac { pinctrl-names = "default"; pinctrl-0 = <&emac_pins>; - phy = <&phy1>; + phy-handle = <&phy1>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts b/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts index 247fa27ef717..8a7b4c53d278 100644 --- a/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts +++ b/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts @@ -94,7 +94,7 @@ }; &emac { - phy = <&phy1>; + phy-handle = <&phy1>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-marsboard.dts b/arch/arm/boot/dts/sun4i-a10-marsboard.dts index 58ad2ad9041f..a843e57530ed 100644 --- a/arch/arm/boot/dts/sun4i-a10-marsboard.dts +++ b/arch/arm/boot/dts/sun4i-a10-marsboard.dts @@ -105,7 +105,7 @@ }; &emac { - phy = <&phy1>; + phy-handle = <&phy1>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts index a8e537fd4bd6..845f76824d57 100644 --- a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts +++ b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts @@ -112,7 +112,7 @@ }; &emac { - phy = <&phy1>; + phy-handle = <&phy1>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-pcduino.dts b/arch/arm/boot/dts/sun4i-a10-pcduino.dts index 0f1e781069e9..83287b6c975e 100644 --- a/arch/arm/boot/dts/sun4i-a10-pcduino.dts +++ b/arch/arm/boot/dts/sun4i-a10-pcduino.dts @@ -110,7 +110,7 @@ }; &emac { - phy = <&phy1>; + phy-handle = <&phy1>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index e88daa4ef1af..bf531efc0610 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -520,6 +520,7 @@ interrupts = <39>; clocks = <&ccu CLK_AHB_EHCI0>; phys = <&usbphy 1>; + phy-names = "usb"; status = "disabled"; }; @@ -529,6 +530,7 @@ interrupts = <64>; clocks = <&ccu CLK_USB_OHCI0>, <&ccu CLK_AHB_OHCI0>; phys = <&usbphy 1>; + phy-names = "usb"; status = "disabled"; }; @@ -608,6 +610,7 @@ interrupts = <40>; clocks = <&ccu CLK_AHB_EHCI1>; phys = <&usbphy 2>; + phy-names = "usb"; status = "disabled"; }; @@ -617,6 +620,17 @@ interrupts = <65>; clocks = <&ccu CLK_USB_OHCI1>, <&ccu CLK_AHB_OHCI1>; phys = <&usbphy 2>; + phy-names = "usb"; + status = "disabled"; + }; + + csi1: csi@1c1d000 { + compatible = "allwinner,sun4i-a10-csi1"; + reg = <0x01c1d000 0x1000>; + interrupts = <43>; + clocks = <&ccu CLK_AHB_CSI1>, <&ccu CLK_DRAM_CSI1>; + clock-names = "bus", "ram"; + resets = <&ccu RST_CSI1>; status = "disabled"; }; @@ -666,6 +680,31 @@ function = "can"; }; + /omit-if-no-ref/ + csi1_8bits_pg_pins: csi1-8bits-pg-pins { + pins = "PG0", "PG2", "PG3", "PG4", "PG5", + "PG6", "PG7", "PG8", "PG9", "PG10", + "PG11"; + function = "csi1"; + }; + + /omit-if-no-ref/ + csi1_24bits_ph_pins: csi1-24bits-ph-pins { + pins = "PH0", "PH1", "PH2", "PH3", "PH4", + "PH5", "PH6", "PH7", "PH8", "PH9", + "PH10", "PH11", "PH12", "PH13", "PH14", + "PH15", "PH16", "PH17", "PH18", "PH19", + "PH20", "PH21", "PH22", "PH23", "PH24", + "PH25", "PH26", "PH27"; + function = "csi1"; + }; + + /omit-if-no-ref/ + csi1_clk_pg_pin: csi1-clk-pg-pin { + pins = "PG1"; + function = "csi1"; + }; + emac_pins: emac0-pins { pins = "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", @@ -803,13 +842,20 @@ timer@1c20c00 { compatible = "allwinner,sun4i-a10-timer"; reg = <0x01c20c00 0x90>; - interrupts = <22>; + interrupts = <22>, + <23>, + <24>, + <25>, + <67>, + <68>; clocks = <&osc24M>; }; wdt: watchdog@1c20c90 { compatible = "allwinner,sun4i-a10-wdt"; reg = <0x01c20c90 0x10>; + interrupts = <24>; + clocks = <&osc24M>; }; rtc: rtc@1c20d00 { diff --git a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts index 5340b4164df2..d6bb82c295f0 100644 --- a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts @@ -98,7 +98,7 @@ &emac { pinctrl-names = "default"; pinctrl-0 = <&emac_pa_pins>; - phy = <&phy1>; + phy-handle = <&phy1>; status = "okay"; }; @@ -130,7 +130,7 @@ &i2c1 { status = "okay"; - at24@50 { + eeprom@50 { compatible = "atmel,24c16"; pagesize = <16>; reg = <0x50>; diff --git a/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts b/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts index b5ee8fb13a92..1f74ba1634cc 100644 --- a/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts +++ b/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts @@ -91,7 +91,7 @@ &emac { pinctrl-names = "default"; pinctrl-0 = <&emac_pd_pins>; - phy = <&phy1>; + phy-handle = <&phy1>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun5i-a13-q8-tablet.dts b/arch/arm/boot/dts/sun5i-a13-q8-tablet.dts index fde559a8b61e..f9fc1c8b60b8 100644 --- a/arch/arm/boot/dts/sun5i-a13-q8-tablet.dts +++ b/arch/arm/boot/dts/sun5i-a13-q8-tablet.dts @@ -49,7 +49,7 @@ compatible = "allwinner,q8-a13", "allwinner,sun5i-a13"; panel: panel { - compatible = "bananapi,s070wv20-ct16", "simple-panel"; + compatible = "bananapi,s070wv20-ct16"; power-supply = <®_vcc3v3>; enable-gpios = <&axp_gpio 0 GPIO_ACTIVE_HIGH>; /* AXP GPIO0 */ backlight = <&backlight>; diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi index 2fb438c4fe9d..0b526e6e5a95 100644 --- a/arch/arm/boot/dts/sun5i.dtsi +++ b/arch/arm/boot/dts/sun5i.dtsi @@ -185,7 +185,7 @@ mbus: dram-controller@1c01000 { compatible = "allwinner,sun5i-a13-mbus"; reg = <0x01c01000 0x1000>; - clocks = <&ccu 99>; + clocks = <&ccu CLK_MBUS>; dma-ranges = <0x00000000 0x40000000 0x20000000>; #interconnect-cells = <1>; }; @@ -275,6 +275,7 @@ compatible = "allwinner,sun5i-a13-tcon"; reg = <0x01c0c000 0x1000>; interrupts = <44>; + dmas = <&dma SUN4I_DMA_DEDICATED 14>; resets = <&ccu RST_LCD>; reset-names = "lcd"; clocks = <&ccu CLK_AHB_LCD>, @@ -391,6 +392,7 @@ interrupts = <39>; clocks = <&ccu CLK_AHB_EHCI>; phys = <&usbphy 1>; + phy-names = "usb"; status = "disabled"; }; @@ -400,6 +402,7 @@ interrupts = <40>; clocks = <&ccu CLK_USB_OHCI>, <&ccu CLK_AHB_OHCI>; phys = <&usbphy 1>; + phy-names = "usb"; status = "disabled"; }; @@ -588,13 +591,20 @@ timer@1c20c00 { compatible = "allwinner,sun4i-a10-timer"; reg = <0x01c20c00 0x90>; - interrupts = <22>; + interrupts = <22>, + <23>, + <24>, + <25>, + <67>, + <68>; clocks = <&ccu CLK_HOSC>; }; wdt: watchdog@1c20c90 { compatible = "allwinner,sun4i-a10-wdt"; reg = <0x01c20c90 0x10>; + interrupts = <24>; + clocks = <&osc24M>; }; ir0: ir@1c21800 { diff --git a/arch/arm/boot/dts/sun6i-a31-colombus.dts b/arch/arm/boot/dts/sun6i-a31-colombus.dts index c3d56dc93513..93a15eaaa8cb 100644 --- a/arch/arm/boot/dts/sun6i-a31-colombus.dts +++ b/arch/arm/boot/dts/sun6i-a31-colombus.dts @@ -76,13 +76,9 @@ &gmac { pinctrl-names = "default"; pinctrl-0 = <&gmac_rgmii_pins>; - phy = <&phy1>; + phy-handle = <&phy1>; phy-mode = "rgmii"; status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; }; &i2c0 { @@ -104,6 +100,12 @@ }; }; +&mdio { + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + &mmc0 { vmmc-supply = <®_vcc3v0>; bus-width = <4>; diff --git a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts index 09832b4e8fc8..049e6ab3cf56 100644 --- a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts +++ b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts @@ -153,16 +153,9 @@ &gmac { pinctrl-names = "default"; pinctrl-0 = <&gmac_rgmii_pins>; - phy = <&phy1>; + phy-handle = <&phy1>; phy-mode = "rgmii"; - snps,reset-gpio = <&pio 0 21 GPIO_ACTIVE_HIGH>; - snps,reset-active-low; - snps,reset-delays-us = <0 10000 30000>; status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; }; &hdmi { @@ -199,6 +192,15 @@ status = "okay"; }; +&mdio { + phy1: ethernet-phy@1 { + reg = <1>; + reset-gpios = <&pio 0 21 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <30000>; + }; +}; + &mmc0 { vmmc-supply = <®_dcdc1>; bus-width = <4>; diff --git a/arch/arm/boot/dts/sun6i-a31-i7.dts b/arch/arm/boot/dts/sun6i-a31-i7.dts index 091eb2ac53b3..6cc8ccf53d88 100644 --- a/arch/arm/boot/dts/sun6i-a31-i7.dts +++ b/arch/arm/boot/dts/sun6i-a31-i7.dts @@ -117,13 +117,9 @@ &gmac { pinctrl-names = "default"; pinctrl-0 = <&gmac_mii_pins>; - phy = <&phy1>; + phy-handle = <&phy1>; phy-mode = "mii"; status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; }; &hdmi { @@ -142,6 +138,12 @@ status = "okay"; }; +&mdio { + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + &mmc0 { vmmc-supply = <®_vcc3v3>; bus-width = <4>; diff --git a/arch/arm/boot/dts/sun6i-a31-m9.dts b/arch/arm/boot/dts/sun6i-a31-m9.dts index 6eafb6361a26..a645c8f4257c 100644 --- a/arch/arm/boot/dts/sun6i-a31-m9.dts +++ b/arch/arm/boot/dts/sun6i-a31-m9.dts @@ -84,14 +84,10 @@ &gmac { pinctrl-names = "default"; pinctrl-0 = <&gmac_mii_pins>; - phy = <&phy1>; + phy-handle = <&phy1>; phy-mode = "mii"; phy-supply = <®_dldo1>; status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; }; &ir { @@ -100,6 +96,12 @@ status = "okay"; }; +&mdio { + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + &mmc0 { vmmc-supply = <®_dcdc1>; bus-width = <4>; diff --git a/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts b/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts index ca036f97923a..648f24746234 100644 --- a/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts +++ b/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts @@ -84,14 +84,10 @@ &gmac { pinctrl-names = "default"; pinctrl-0 = <&gmac_mii_pins>; - phy = <&phy1>; + phy-handle = <&phy1>; phy-mode = "mii"; phy-supply = <®_dldo1>; status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; }; &ir { @@ -100,6 +96,12 @@ status = "okay"; }; +&mdio { + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + &mmc0 { vmmc-supply = <®_dcdc1>; bus-width = <4>; diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index dcddc3392460..7762fbd9a133 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -285,14 +285,19 @@ compatible = "allwinner,sun6i-a31-tcon"; reg = <0x01c0c000 0x1000>; interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; - resets = <&ccu RST_AHB1_LCD0>; - reset-names = "lcd"; + dmas = <&dma 11>; + resets = <&ccu RST_AHB1_LCD0>, + <&ccu RST_AHB1_LVDS>; + reset-names = "lcd", + "lvds"; clocks = <&ccu CLK_AHB1_LCD0>, <&ccu CLK_LCD0_CH0>, - <&ccu CLK_LCD0_CH1>; + <&ccu CLK_LCD0_CH1>, + <&ccu 15>; clock-names = "ahb", "tcon-ch0", - "tcon-ch1"; + "tcon-ch1", + "lvds-alt"; clock-output-names = "tcon0-pixel-clock"; #clock-cells = <0>; @@ -334,14 +339,18 @@ compatible = "allwinner,sun6i-a31-tcon"; reg = <0x01c0d000 0x1000>; interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; - resets = <&ccu RST_AHB1_LCD1>; - reset-names = "lcd"; + dmas = <&dma 12>; + resets = <&ccu RST_AHB1_LCD1>, + <&ccu RST_AHB1_LVDS>; + reset-names = "lcd", "lvds"; clocks = <&ccu CLK_AHB1_LCD1>, <&ccu CLK_LCD1_CH0>, - <&ccu CLK_LCD1_CH1>; + <&ccu CLK_LCD1_CH1>, + <&ccu 15>; clock-names = "ahb", "tcon-ch0", - "tcon-ch1"; + "tcon-ch1", + "lvds-alt"; clock-output-names = "tcon1-pixel-clock"; #clock-cells = <0>; @@ -469,7 +478,6 @@ <&ccu CLK_PLL_VIDEO1_2X>; clock-names = "ahb", "mod", "ddc", "pll-0", "pll-1"; resets = <&ccu RST_AHB1_HDMI>; - reset-names = "ahb"; dma-names = "ddc-tx", "ddc-rx", "audio-tx"; dmas = <&dma 13>, <&dma 13>, <&dma 14>; status = "disabled"; @@ -545,6 +553,7 @@ clocks = <&ccu CLK_AHB1_EHCI0>; resets = <&ccu RST_AHB1_EHCI0>; phys = <&usbphy 1>; + phy-names = "usb"; status = "disabled"; }; @@ -555,6 +564,7 @@ clocks = <&ccu CLK_AHB1_OHCI0>, <&ccu CLK_USB_OHCI0>; resets = <&ccu RST_AHB1_OHCI0>; phys = <&usbphy 1>; + phy-names = "usb"; status = "disabled"; }; @@ -565,6 +575,7 @@ clocks = <&ccu CLK_AHB1_EHCI1>; resets = <&ccu RST_AHB1_EHCI1>; phys = <&usbphy 2>; + phy-names = "usb"; status = "disabled"; }; @@ -575,6 +586,7 @@ clocks = <&ccu CLK_AHB1_OHCI1>, <&ccu CLK_USB_OHCI1>; resets = <&ccu RST_AHB1_OHCI1>; phys = <&usbphy 2>; + phy-names = "usb"; status = "disabled"; }; @@ -736,13 +748,16 @@ <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; clocks = <&osc24M>; }; wdt1: watchdog@1c20ca0 { compatible = "allwinner,sun6i-a31-wdt"; reg = <0x01c20ca0 0x20>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&osc24M>; }; spdif: spdif@1c21000 { @@ -939,8 +954,12 @@ snps,fixed-burst; snps,force_sf_dma_mode; status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; + + mdio: mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + }; }; crypto: crypto-engine@1c15000 { @@ -1364,7 +1383,7 @@ }; ir: ir@1f02000 { - compatible = "allwinner,sun5i-a13-ir"; + compatible = "allwinner,sun6i-a31-ir"; clocks = <&apb0_gates 1>, <&ir_clk>; clock-names = "apb", "ir"; resets = <&apb0_rst 1>; diff --git a/arch/arm/boot/dts/sun6i-a31s-cs908.dts b/arch/arm/boot/dts/sun6i-a31s-cs908.dts index 72a02c045a38..1d15e15011c6 100644 --- a/arch/arm/boot/dts/sun6i-a31s-cs908.dts +++ b/arch/arm/boot/dts/sun6i-a31s-cs908.dts @@ -67,12 +67,9 @@ &gmac { pinctrl-names = "default"; pinctrl-0 = <&gmac_mii_pins>; - phy = <&phy1>; + phy-handle = <&phy1>; phy-mode = "mii"; status = "okay"; - phy1: ethernet-phy@1 { - reg = <1>; - }; }; &ir { @@ -81,6 +78,12 @@ status = "okay"; }; +&mdio { + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + &ohci1 { status = "okay"; }; diff --git a/arch/arm/boot/dts/sun6i-a31s-sina31s.dts b/arch/arm/boot/dts/sun6i-a31s-sina31s.dts index 4865c3271ab0..0af48e143b66 100644 --- a/arch/arm/boot/dts/sun6i-a31s-sina31s.dts +++ b/arch/arm/boot/dts/sun6i-a31s-sina31s.dts @@ -115,14 +115,10 @@ &gmac { pinctrl-names = "default"; pinctrl-0 = <&gmac_mii_pins>; - phy = <&phy1>; + phy-handle = <&phy1>; phy-mode = "mii"; phy-supply = <®_dldo1>; status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; }; &hdmi { @@ -160,6 +156,12 @@ }; }; +&mdio { + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + &mmc0 { vmmc-supply = <®_dcdc1>; bus-width = <4>; diff --git a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts index 8e724c52feff..708caee52425 100644 --- a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts +++ b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts @@ -92,17 +92,10 @@ &gmac { pinctrl-names = "default"; pinctrl-0 = <&gmac_rgmii_pins>; - phy = <&phy1>; + phy-handle = <&phy1>; phy-mode = "rgmii"; phy-supply = <®_dldo1>; - snps,reset-gpio = <&pio 0 21 GPIO_ACTIVE_HIGH>; /* PA21 */ - snps,reset-active-low; - snps,reset-delays-us = <0 10000 30000>; status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; }; &ir { @@ -111,6 +104,15 @@ status = "okay"; }; +&mdio { + phy1: ethernet-phy@1 { + reg = <1>; + reset-gpios = <&pio 0 21 GPIO_ACTIVE_LOW>; /* PA21 */ + reset-assert-us = <10000>; + reset-deassert-us = <30000>; + }; +}; + &mmc0 { vmmc-supply = <®_dcdc1>; bus-width = <4>; diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts index e2bfe0058830..32d5d45a35c0 100644 --- a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts +++ b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts @@ -129,14 +129,10 @@ &gmac { pinctrl-names = "default"; pinctrl-0 = <&gmac_rgmii_pins>; - phy = <&phy1>; + phy-handle = <&phy1>; phy-mode = "rgmii"; phy-supply = <®_gmac_3v3>; status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; }; &hdmi { @@ -171,6 +167,12 @@ status = "okay"; }; +&gmac_mdio { + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + &mmc0 { vmmc-supply = <®_vcc3v3>; bus-width = <4>; diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi.dts b/arch/arm/boot/dts/sun7i-a20-bananapi.dts index 4df921632f7a..bb3987e101c2 100644 --- a/arch/arm/boot/dts/sun7i-a20-bananapi.dts +++ b/arch/arm/boot/dts/sun7i-a20-bananapi.dts @@ -131,14 +131,10 @@ &gmac { pinctrl-names = "default"; pinctrl-0 = <&gmac_rgmii_pins>; - phy = <&phy1>; + phy-handle = <&phy1>; phy-mode = "rgmii"; phy-supply = <®_gmac_3v3>; status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; }; &hdmi { @@ -171,6 +167,12 @@ status = "okay"; }; +&gmac_mdio { + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + &mmc0 { vmmc-supply = <®_vcc3v3>; bus-width = <4>; diff --git a/arch/arm/boot/dts/sun7i-a20-bananapro.dts b/arch/arm/boot/dts/sun7i-a20-bananapro.dts index 0176e9de0180..01ccff756996 100644 --- a/arch/arm/boot/dts/sun7i-a20-bananapro.dts +++ b/arch/arm/boot/dts/sun7i-a20-bananapro.dts @@ -109,14 +109,10 @@ &gmac { pinctrl-names = "default"; pinctrl-0 = <&gmac_rgmii_pins>; - phy = <&phy1>; + phy-handle = <&phy1>; phy-mode = "rgmii"; phy-supply = <®_gmac_3v3>; status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; }; &i2c0 { @@ -143,6 +139,12 @@ status = "okay"; }; +&gmac_mdio { + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + &mmc0 { vmmc-supply = <®_vcc3v3>; bus-width = <4>; diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts index 08e5a5abf8cc..b8203e4ef21c 100644 --- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts +++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts @@ -115,13 +115,9 @@ &gmac { pinctrl-names = "default"; pinctrl-0 = <&gmac_mii_pins>; - phy = <&phy1>; + phy-handle = <&phy1>; phy-mode = "mii"; status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; }; &hdmi { @@ -161,6 +157,12 @@ status = "okay"; }; +&gmac_mdio { + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + &ohci0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts index 99f531b8d2a7..8c8dee6ea461 100644 --- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts +++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts @@ -150,13 +150,9 @@ &gmac { pinctrl-names = "default"; pinctrl-0 = <&gmac_rgmii_pins>; - phy = <&phy1>; + phy-handle = <&phy1>; phy-mode = "rgmii"; status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; }; &hdmi { @@ -194,6 +190,12 @@ status = "okay"; }; +&gmac_mdio { + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + &mmc0 { vmmc-supply = <®_vcc3v3>; bus-width = <4>; diff --git a/arch/arm/boot/dts/sun7i-a20-hummingbird.dts b/arch/arm/boot/dts/sun7i-a20-hummingbird.dts index fd0153f65685..3def2a330598 100644 --- a/arch/arm/boot/dts/sun7i-a20-hummingbird.dts +++ b/arch/arm/boot/dts/sun7i-a20-hummingbird.dts @@ -100,19 +100,10 @@ &gmac { pinctrl-names = "default"; pinctrl-0 = <&gmac_rgmii_pins>; - phy = <&phy1>; + phy-handle = <&phy1>; phy-mode = "rgmii"; phy-supply = <®_gmac_vdd>; - /* phy reset config */ - snps,reset-gpio = <&pio 0 17 GPIO_ACTIVE_HIGH>; /* PA17 */ - snps,reset-active-low; - /* wait 1s after reset, otherwise fail to read phy id */ - snps,reset-delays-us = <0 10000 1000000>; status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; }; &i2c0 { @@ -146,6 +137,16 @@ status = "okay"; }; +&gmac_mdio { + phy1: ethernet-phy@1 { + reg = <1>; + reset-gpios = <&pio 0 17 GPIO_ACTIVE_LOW>; /* PA17 */ + reset-assert-us = <10000>; + /* wait 1s after reset, otherwise fail to read phy id */ + reset-deassert-us = <1000000>; + }; +}; + &mmc0 { vmmc-supply = <®_vcc3v0>; bus-width = <4>; diff --git a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts index 5f1c4f573d3e..358ed5f1b1c1 100644 --- a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts +++ b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts @@ -115,14 +115,10 @@ &gmac { pinctrl-names = "default"; pinctrl-0 = <&gmac_mii_pins>; - phy = <&phy1>; + phy-handle = <&phy1>; phy-mode = "mii"; phy-supply = <®_gmac_3v3>; status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; }; &i2c0 { @@ -145,6 +141,12 @@ status = "okay"; }; +&gmac_mdio { + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + &mmc0 { vmmc-supply = <®_vcc3v3>; bus-width = <4>; diff --git a/arch/arm/boot/dts/sun7i-a20-icnova-swac.dts b/arch/arm/boot/dts/sun7i-a20-icnova-swac.dts index 7449aac3f43b..413505f45a81 100644 --- a/arch/arm/boot/dts/sun7i-a20-icnova-swac.dts +++ b/arch/arm/boot/dts/sun7i-a20-icnova-swac.dts @@ -76,13 +76,9 @@ &gmac { pinctrl-names = "default"; pinctrl-0 = <&gmac_mii_pins>; - phy = <&phy1>; + phy-handle = <&phy1>; phy-mode = "mii"; status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; }; &i2c0 { @@ -99,6 +95,12 @@ status = "okay"; }; +&gmac_mdio { + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + &mmc0 { vmmc-supply = <®_vcc3v3>; bus-width = <4>; diff --git a/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts b/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts index b90a7607d069..946c27278321 100644 --- a/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts +++ b/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts @@ -97,10 +97,12 @@ &gmac { pinctrl-names = "default"; pinctrl-0 = <&gmac_mii_pins>; - phy = <&phy1>; + phy-handle = <&phy1>; phy-mode = "mii"; status = "okay"; +}; +&gmac_mdio { phy1: ethernet-phy@1 { reg = <1>; }; diff --git a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts index 3e170cfac86a..17fa8901fc00 100644 --- a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts +++ b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts @@ -123,8 +123,6 @@ phy-mode = "rgmii"; phy-supply = <®_gmac_3v3>; status = "okay"; - /delete-property/#address-cells; - /delete-property/#size-cells; fixed-link { speed = <1000>; diff --git a/arch/arm/boot/dts/sun7i-a20-m3.dts b/arch/arm/boot/dts/sun7i-a20-m3.dts index b8a1aaaf3976..6bff9e731fc3 100644 --- a/arch/arm/boot/dts/sun7i-a20-m3.dts +++ b/arch/arm/boot/dts/sun7i-a20-m3.dts @@ -82,13 +82,9 @@ &gmac { pinctrl-names = "default"; pinctrl-0 = <&gmac_mii_pins>; - phy = <&phy1>; + phy-handle = <&phy1>; phy-mode = "mii"; status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; }; &i2c0 { @@ -111,6 +107,12 @@ status = "okay"; }; +&gmac_mdio { + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + &mmc0 { vmmc-supply = <®_vcc3v3>; bus-width = <4>; diff --git a/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts b/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts index f0e6a96e5785..6f9c54b8e49a 100644 --- a/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts +++ b/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts @@ -111,13 +111,9 @@ &gmac { pinctrl-names = "default"; pinctrl-0 = <&gmac_rgmii_pins>; - phy = <&phy1>; + phy-handle = <&phy1>; phy-mode = "rgmii"; status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; }; &hdmi { @@ -202,6 +198,12 @@ }; }; +&gmac_mdio { + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + &mmc0 { vmmc-supply = <®_vcc3v3>; bus-width = <4>; diff --git a/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts b/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts index c34a83f666c7..230d62a6b8f1 100644 --- a/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts +++ b/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts @@ -105,18 +105,10 @@ &gmac { pinctrl-names = "default"; pinctrl-0 = <&gmac_rgmii_pins>; - phy = <&phy3>; + phy-handle = <&phy3>; phy-mode = "rgmii"; phy-supply = <®_vcc3v3>; - - snps,reset-gpio = <&pio 0 17 GPIO_ACTIVE_HIGH>; - snps,reset-active-low; - snps,reset-delays-us = <0 10000 1000000>; status = "okay"; - - phy3: ethernet-phy@3 { - reg = <3>; - }; }; &hdmi { @@ -161,6 +153,16 @@ status = "okay"; }; +&gmac_mdio { + phy3: ethernet-phy@3 { + reg = <3>; + reset-gpios = <&pio 0 17 GPIO_ACTIVE_LOW>; /* PA17 */ + reset-assert-us = <10000>; + /* wait 1s after reset, otherwise fail to read phy id */ + reset-deassert-us = <1000000>; + }; +}; + &mmc0 { vmmc-supply = <®_vcc3v3>; bus-width = <4>; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts index e40dd47df8ce..2adbac860119 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts @@ -106,13 +106,9 @@ &gmac { pinctrl-names = "default"; pinctrl-0 = <&gmac_mii_pins>; - phy = <&phy1>; + phy-handle = <&phy1>; phy-mode = "mii"; status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; }; &hdmi { @@ -149,6 +145,12 @@ }; }; +&gmac_mdio { + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + &mmc0 { vmmc-supply = <®_vcc3v3>; bus-width = <4>; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts index 56f451c07f93..9ba62774e89a 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts @@ -111,13 +111,9 @@ &gmac { pinctrl-names = "default"; pinctrl-0 = <&gmac_rgmii_pins>; - phy = <&phy1>; + phy-handle = <&phy1>; phy-mode = "rgmii"; status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; }; &hdmi { @@ -154,6 +150,12 @@ vref-supply = <®_vcc3v0>; }; +&gmac_mdio { + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + &mmc0 { vmmc-supply = <®_vcc3v3>; bus-width = <4>; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts index 0dcba070444a..359bd0d5b3b1 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts @@ -118,13 +118,9 @@ &gmac { pinctrl-names = "default"; pinctrl-0 = <&gmac_mii_pins>, <&gmac_txerr>; - phy = <&phy1>; + phy-handle = <&phy1>; phy-mode = "mii"; status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; }; &hdmi { @@ -215,6 +211,12 @@ }; }; +&gmac_mdio { + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + &mmc0 { vmmc-supply = <®_vcc3v3>; bus-width = <4>; diff --git a/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts b/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts index 9628041bb3a3..2e328d2cefc1 100644 --- a/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts +++ b/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts @@ -120,14 +120,10 @@ &gmac { pinctrl-names = "default"; pinctrl-0 = <&gmac_rgmii_pins>; - phy = <&phy1>; + phy-handle = <&phy1>; phy-mode = "rgmii"; phy-supply = <®_gmac_3v3>; status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; }; &hdmi { @@ -158,6 +154,12 @@ status = "okay"; }; +&gmac_mdio { + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + &mmc0 { vmmc-supply = <®_vcc3v3>; bus-width = <4>; diff --git a/arch/arm/boot/dts/sun7i-a20-orangepi.dts b/arch/arm/boot/dts/sun7i-a20-orangepi.dts index 7b3532665c28..d75b2e2bab28 100644 --- a/arch/arm/boot/dts/sun7i-a20-orangepi.dts +++ b/arch/arm/boot/dts/sun7i-a20-orangepi.dts @@ -96,14 +96,10 @@ &gmac { pinctrl-names = "default"; pinctrl-0 = <&gmac_rgmii_pins>; - phy = <&phy1>; + phy-handle = <&phy1>; phy-mode = "rgmii"; phy-supply = <®_gmac_3v3>; status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; }; &i2c0 { @@ -124,6 +120,12 @@ status = "okay"; }; +&gmac_mdio { + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + &mmc0 { vmmc-supply = <®_vcc3v3>; bus-width = <4>; diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts index 173b676436e9..fce2f7fcd084 100644 --- a/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts +++ b/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts @@ -114,13 +114,9 @@ &gmac { pinctrl-names = "default"; pinctrl-0 = <&gmac_rgmii_pins>; - phy = <&phy1>; + phy-handle = <&phy1>; phy-mode = "rgmii"; status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; }; &hdmi { @@ -149,6 +145,12 @@ status = "okay"; }; +&gmac_mdio { + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + &mmc0 { vmmc-supply = <®_vcc3v3>; bus-width = <4>; diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts index 14a88aa16a97..cc8271d777b8 100644 --- a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts +++ b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts @@ -122,13 +122,9 @@ &gmac { pinctrl-names = "default"; pinctrl-0 = <&gmac_mii_pins>; - phy = <&phy1>; + phy-handle = <&phy1>; phy-mode = "mii"; status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; }; &i2c0 { @@ -149,6 +145,12 @@ status = "okay"; }; +&gmac_mdio { + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + &mmc0 { vmmc-supply = <®_vcc3v3>; bus-width = <4>; diff --git a/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts b/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts index f8475a39777b..3bfae98f3cc3 100644 --- a/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts +++ b/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts @@ -81,13 +81,9 @@ &gmac { pinctrl-names = "default"; pinctrl-0 = <&gmac_rgmii_pins>; - phy = <&phy1>; + phy-handle = <&phy1>; phy-mode = "rgmii"; status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; }; &i2c0 { @@ -110,6 +106,12 @@ #include "axp209.dtsi" +&gmac_mdio { + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + &mmc0 { vmmc-supply = <®_vcc3v3>; bus-width = <4>; diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index 9ad8e445b240..92b5be97085d 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -376,6 +376,16 @@ num-cs = <1>; }; + csi0: csi@1c09000 { + compatible = "allwinner,sun7i-a20-csi0"; + reg = <0x01c09000 0x1000>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_AHB_CSI0>, <&ccu CLK_CSI_SCLK>, <&ccu CLK_DRAM_CSI0>; + clock-names = "bus", "isp", "ram"; + resets = <&ccu RST_CSI0>; + status = "disabled"; + }; + emac: ethernet@1c0b000 { compatible = "allwinner,sun4i-a10-emac"; reg = <0x01c0b000 0x1000>; @@ -612,6 +622,7 @@ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_AHB_EHCI0>; phys = <&usbphy 1>; + phy-names = "usb"; status = "disabled"; }; @@ -621,6 +632,7 @@ interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_USB_OHCI0>, <&ccu CLK_AHB_OHCI0>; phys = <&usbphy 1>; + phy-names = "usb"; status = "disabled"; }; @@ -703,6 +715,7 @@ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_AHB_EHCI1>; phys = <&usbphy 2>; + phy-names = "usb"; status = "disabled"; }; @@ -712,6 +725,18 @@ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_USB_OHCI1>, <&ccu CLK_AHB_OHCI1>; phys = <&usbphy 2>; + phy-names = "usb"; + status = "disabled"; + }; + + csi1: csi@1c1d000 { + compatible = "allwinner,sun7i-a20-csi1", + "allwinner,sun4i-a10-csi1"; + reg = <0x01c1d000 0x1000>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_AHB_CSI1>, <&ccu CLK_DRAM_CSI1>; + clock-names = "bus", "ram"; + resets = <&ccu RST_CSI1>; status = "disabled"; }; @@ -775,6 +800,45 @@ }; /omit-if-no-ref/ + csi0_8bits_pins: csi-8bits-pins { + pins = "PE0", "PE2", "PE3", "PE4", "PE5", + "PE6", "PE7", "PE8", "PE9", "PE10", + "PE11"; + function = "csi0"; + }; + + /omit-if-no-ref/ + csi0_clk_pin: csi-clk-pin { + pins = "PE1"; + function = "csi0"; + }; + + /omit-if-no-ref/ + csi1_8bits_pg_pins: csi1-8bits-pg-pins { + pins = "PG0", "PG2", "PG3", "PG4", "PG5", + "PG6", "PG7", "PG8", "PG9", "PG10", + "PG11"; + function = "csi1"; + }; + + /omit-if-no-ref/ + csi1_24bits_ph_pins: csi1-24bits-ph-pins { + pins = "PH0", "PH1", "PH2", "PH3", "PH4", + "PH5", "PH6", "PH7", "PH8", "PH9", + "PH10", "PH11", "PH12", "PH13", "PH14", + "PH15", "PH16", "PH17", "PH18", "PH19", + "PH20", "PH21", "PH22", "PH23", "PH24", + "PH25", "PH26", "PH27"; + function = "csi1"; + }; + + /omit-if-no-ref/ + csi1_clk_pg_pin: csi1-clk-pg-pin { + pins = "PG1"; + function = "csi1"; + }; + + /omit-if-no-ref/ emac_pa_pins: emac-pa-pins { pins = "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", @@ -1115,6 +1179,8 @@ wdt: watchdog@1c20c90 { compatible = "allwinner,sun4i-a10-wdt"; reg = <0x01c20c90 0x10>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&osc24M>; }; rtc: rtc@1c20d00 { @@ -1437,8 +1503,12 @@ snps,fixed-burst; snps,force_sf_dma_mode; status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; + + gmac_mdio: mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + }; }; hstimer@1c60000 { diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi index af2fa694a467..48487f6d4ab9 100644 --- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi @@ -182,14 +182,19 @@ /* compatible gets set in SoC specific dtsi file */ reg = <0x01c0c000 0x1000>; interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dma 12>; clocks = <&ccu CLK_BUS_LCD>, - <&ccu CLK_LCD_CH0>; + <&ccu CLK_LCD_CH0>, + <&ccu 13>; clock-names = "ahb", - "tcon-ch0"; + "tcon-ch0", + "lvds-alt"; clock-output-names = "tcon-pixel-clock"; #clock-cells = <0>; - resets = <&ccu RST_BUS_LCD>; - reset-names = "lcd"; + resets = <&ccu RST_BUS_LCD>, + <&ccu RST_BUS_LVDS>; + reset-names = "lcd", + "lvds"; status = "disabled"; ports { @@ -307,6 +312,7 @@ clocks = <&ccu CLK_BUS_EHCI>; resets = <&ccu RST_BUS_EHCI>; phys = <&usbphy 1>; + phy-names = "usb"; status = "disabled"; }; @@ -317,6 +323,7 @@ clocks = <&ccu CLK_BUS_OHCI>, <&ccu CLK_USB_OHCI>; resets = <&ccu RST_BUS_OHCI>; phys = <&usbphy 1>; + phy-names = "usb"; status = "disabled"; }; @@ -441,7 +448,7 @@ }; timer@1c20c00 { - compatible = "allwinner,sun4i-a10-timer"; + compatible = "allwinner,sun8i-a23-timer"; reg = <0x01c20c00 0xa0>; interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; @@ -452,6 +459,7 @@ compatible = "allwinner,sun6i-a31-wdt"; reg = <0x01c20ca0 0x20>; interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&osc24M>; }; pwm: pwm@1c21400 { diff --git a/arch/arm/boot/dts/sun8i-a23-q8-tablet.dts b/arch/arm/boot/dts/sun8i-a23-q8-tablet.dts index 5659c63d7d77..51097c77a152 100644 --- a/arch/arm/boot/dts/sun8i-a23-q8-tablet.dts +++ b/arch/arm/boot/dts/sun8i-a23-q8-tablet.dts @@ -63,7 +63,7 @@ }; &panel { - compatible = "bananapi,s070wv20-ct16", "simple-panel"; + compatible = "bananapi,s070wv20-ct16"; }; &tcon0_out { diff --git a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts index ea299d3d84d0..d9be511f054f 100644 --- a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts +++ b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts @@ -60,6 +60,17 @@ stdout-path = "serial0:115200n8"; }; + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; @@ -90,7 +101,7 @@ initial-mode = <1>; /* initialize in HUB mode */ disabled-ports = <1>; intn-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ - reset-gpios = <&pio 4 16 GPIO_ACTIVE_HIGH>; /* PE16 */ + reset-gpios = <&pio 4 16 GPIO_ACTIVE_LOW>; /* PE16 */ connect-gpios = <&pio 4 17 GPIO_ACTIVE_HIGH>; /* PE17 */ refclk-frequency = <19200000>; }; @@ -153,6 +164,10 @@ cpu-supply = <®_dcdc3>; }; +&de { + status = "okay"; +}; + &ehci0 { /* GL830 USB-to-SATA bridge here */ status = "okay"; @@ -172,6 +187,16 @@ status = "okay"; }; +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &mdio { rgmii_phy: ethernet-phy@1 { compatible = "ethernet-phy-ieee802.3-c22"; diff --git a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts index 568b90ece342..2fd31a0a0b34 100644 --- a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts +++ b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts @@ -164,6 +164,22 @@ status = "okay"; }; +&i2c0 { + clock-frequency = <400000>; + status = "okay"; + + touchscreen@38 { + compatible = "edt,edt-ft5x06"; + reg = <0x38>; + interrupt-parent = <&r_pio>; + interrupts = <0 7 IRQ_TYPE_EDGE_FALLING>; /* PL7 */ + reset-gpios = <&pio 3 5 GPIO_ACTIVE_LOW>; /* PD5 */ + vcc-supply = <®_ldo_io0>; + touchscreen-size-x = <1024>; + touchscreen-size-y = <600>; + }; +}; + &i2c1 { clock-frequency = <400000>; status = "okay"; @@ -192,6 +208,7 @@ vqmmc-supply = <®_dldo1>; non-removable; wakeup-source; + keep-power-in-suspend; status = "okay"; brcmf: wifi@1 { diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi index ada6d08bc540..74ac7ee9383c 100644 --- a/arch/arm/boot/dts/sun8i-a83t.dtsi +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi @@ -50,6 +50,7 @@ #include <dt-bindings/reset/sun8i-a83t-ccu.h> #include <dt-bindings/reset/sun8i-de2.h> #include <dt-bindings/reset/sun8i-r-ccu.h> +#include <dt-bindings/thermal/thermal.h> / { interrupt-parent = <&gic>; @@ -314,10 +315,10 @@ display_clocks: clock@1000000 { compatible = "allwinner,sun8i-a83t-de2-clk"; reg = <0x01000000 0x100000>; - clocks = <&ccu CLK_PLL_DE>, - <&ccu CLK_BUS_DE>; - clock-names = "mod", - "bus"; + clocks = <&ccu CLK_BUS_DE>, + <&ccu CLK_PLL_DE>; + clock-names = "bus", + "mod"; resets = <&ccu RST_BUS_DE>; #clock-cells = <1>; #reset-cells = <1>; @@ -581,6 +582,21 @@ sid: eeprom@1c14000 { compatible = "allwinner,sun8i-a83t-sid"; reg = <0x1c14000 0x400>; + #address-cells = <1>; + #size-cells = <1>; + + ths_calibration: thermal-sensor-calibration@34 { + reg = <0x34 8>; + }; + }; + + crypto: crypto@1c15000 { + compatible = "allwinner,sun8i-a83t-crypto"; + reg = <0x01c15000 0x1000>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + resets = <&ccu RST_BUS_SS>; + clocks = <&ccu CLK_BUS_SS>, <&ccu CLK_SS>; + clock-names = "bus", "mod"; }; usb_otg: usb@1c19000 { @@ -632,6 +648,7 @@ clocks = <&ccu CLK_BUS_EHCI0>; resets = <&ccu RST_BUS_EHCI0>; phys = <&usbphy 1>; + phy-names = "usb"; status = "disabled"; }; @@ -643,6 +660,7 @@ clocks = <&ccu CLK_BUS_OHCI0>, <&ccu CLK_USB_OHCI0>; resets = <&ccu RST_BUS_OHCI0>; phys = <&usbphy 1>; + phy-names = "usb"; status = "disabled"; }; @@ -654,6 +672,7 @@ clocks = <&ccu CLK_BUS_EHCI1>; resets = <&ccu RST_BUS_EHCI1>; phys = <&usbphy 2>; + phy-names = "usb"; status = "disabled"; }; @@ -806,7 +825,7 @@ }; timer@1c20c00 { - compatible = "allwinner,sun4i-a10-timer"; + compatible = "allwinner,sun8i-a23-timer"; reg = <0x01c20c00 0xa0>; interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; @@ -987,9 +1006,9 @@ reg = <0x01c30000 0x104>; interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "macirq"; - resets = <&ccu 13>; + resets = <&ccu CLK_BUS_EMAC>; reset-names = "stmmaceth"; - clocks = <&ccu 27>; + clocks = <&ccu RST_BUS_EMAC>; clock-names = "stmmaceth"; status = "disabled"; @@ -1037,7 +1056,7 @@ resets = <&ccu RST_BUS_HDMI1>; reset-names = "ctrl"; phys = <&hdmi_phy>; - phy-names = "hdmi-phy"; + phy-names = "phy"; pinctrl-names = "default"; pinctrl-0 = <&hdmi_pins>; status = "disabled"; @@ -1083,7 +1102,7 @@ compatible = "allwinner,sun8i-a83t-r-ccu"; reg = <0x01f01400 0x400>; clocks = <&osc24M>, <&osc16Md512>, <&osc16M>, - <&ccu 6>; + <&ccu CLK_PLL_PERIPH>; clock-names = "hosc", "losc", "iosc", "pll-periph"; #clock-cells = <1>; #reset-cells = <1>; @@ -1096,7 +1115,7 @@ r_cir: ir@1f02000 { compatible = "allwinner,sun8i-a83t-ir", - "allwinner,sun5i-a13-ir"; + "allwinner,sun6i-a31-ir"; clocks = <&r_ccu CLK_APB0_IR>, <&r_ccu CLK_IR>; clock-names = "apb", "ir"; resets = <&r_ccu RST_APB0_IR>; @@ -1153,5 +1172,34 @@ #address-cells = <1>; #size-cells = <0>; }; + + ths: thermal-sensor@1f04000 { + compatible = "allwinner,sun8i-a83t-ths"; + reg = <0x01f04000 0x100>; + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + nvmem-cells = <&ths_calibration>; + nvmem-cell-names = "calibration"; + #thermal-sensor-cells = <1>; + }; + }; + + thermal-zones { + cpu0_thermal: cpu0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&ths 0>; + }; + + cpu1_thermal: cpu1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&ths 1>; + }; + + gpu_thermal: gpu-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&ths 2>; + }; }; }; diff --git a/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts b/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts index ac9e26b1d906..45a24441ff18 100644 --- a/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts +++ b/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts @@ -143,6 +143,7 @@ }; &ir { + linux,rc-map-name = "rc-tanix-tx3mini"; pinctrl-names = "default"; pinctrl-0 = <&r_ir_rx_pin>; status = "okay"; diff --git a/arch/arm/boot/dts/sun8i-h3-emlid-neutis-n5h3-devboard.dts b/arch/arm/boot/dts/sun8i-h3-emlid-neutis-n5h3-devboard.dts new file mode 100644 index 000000000000..02fbe00cde97 --- /dev/null +++ b/arch/arm/boot/dts/sun8i-h3-emlid-neutis-n5h3-devboard.dts @@ -0,0 +1,72 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * DTS for Emlid Neutis N5 Dev board. + * + * Copyright (C) 2019 Georgii Staroselskii <georgiii.staroselskii@emlid.com> + */ + +/dts-v1/; + +#include "sun8i-h3-emlid-neutis-n5h3.dtsi" + +/ { + model = "Emlid Neutis N5H3 Developer board"; + compatible = "emlid,neutis-n5h3-devboard", + "emlid,neutis-n5h3", + "allwinner,sun8i-h3"; + + vdd_cpux: gpio-regulator { + compatible = "regulator-gpio"; + regulator-name = "vdd-cpux"; + regulator-type = "voltage"; + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + regulator-ramp-delay = <50>; /* 4ms */ + gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */ + gpios-states = <0x1>; + states = <1100000 0x0>, <1300000 0x1>; + }; + + connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + +}; + +&cpu0 { + cpu-supply = <&vdd_cpux>; +}; + +&codec { + status = "okay"; +}; + +&emac { + phy-handle = <&int_mii_phy>; + phy-mode = "mii"; + allwinner,leds-active-low; + status = "okay"; +}; + +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&i2c1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun8i-h3-emlid-neutis-n5h3.dtsi b/arch/arm/boot/dts/sun8i-h3-emlid-neutis-n5h3.dtsi new file mode 100644 index 000000000000..eedd5da5dc2f --- /dev/null +++ b/arch/arm/boot/dts/sun8i-h3-emlid-neutis-n5h3.dtsi @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * DTSI for Emlid Neutis N5 SoM. + * + * Copyright (C) 2019 Georgii Staroselskii <georgii.staroselskii@emlid.com> + */ + +/dts-v1/; + +#include "sun8i-h3.dtsi" +#include <arm/sunxi-h3-h5-emlid-neutis.dtsi> diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts new file mode 100644 index 000000000000..6b149271ef13 --- /dev/null +++ b/arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts @@ -0,0 +1,173 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2019 Karl Palsson <karlp@tweak.net.au> + */ + +/dts-v1/; +#include "sun8i-h3.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + model = "FriendlyARM NanoPi Duo2"; + compatible = "friendlyarm,nanopi-duo2", "allwinner,sun8i-h3"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + + pwr { + label = "nanopi:red:pwr"; + gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */ + default-state = "on"; + }; + + status { + label = "nanopi:green:status"; + gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>; /* PA10 */ + }; + }; + + r_gpio_keys { + compatible = "gpio-keys"; + + k1 { + label = "k1"; + linux,code = <BTN_0>; + gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; /* PL3 */ + }; + }; + + reg_vdd_cpux: vdd-cpux-regulator { + compatible = "regulator-gpio"; + regulator-name = "vdd-cpux"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + regulator-ramp-delay = <50>; /* 4ms */ + + enable-active-high; + enable-gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */ + gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */ + gpios-states = <0x1>; + states = <1100000 0>, <1300000 1>; + }; + + reg_vcc_dram: vcc-dram { + compatible = "regulator-fixed"; + regulator-name = "vcc-dram"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */ + vin-supply = <®_vcc5v0>; + }; + + reg_vdd_sys: vdd-sys { + compatible = "regulator-fixed"; + regulator-name = "vdd-sys"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */ + vin-supply = <®_vcc5v0>; + }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ + clocks = <&rtc 1>; + clock-names = "ext_clock"; + }; + +}; + +&cpu0 { + cpu-supply = <®_vdd_cpux>; +}; + +&ehci0 { + status = "okay"; +}; + +&mmc0 { + bus-width = <4>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ + status = "okay"; + vmmc-supply = <®_vcc3v3>; +}; + +&mmc1 { + vmmc-supply = <®_vcc3v3>; + vqmmc-supply = <®_vcc3v3>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; + + sdio_wifi: sdio_wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&pio>; + interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */ + interrupt-names = "host-wake"; + }; +}; + +&ohci0 { + status = "okay"; +}; + +®_usb0_vbus { + gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */ + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pa_pins>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>, <&uart2_rts_cts_pins>; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&rtc 1>; + clock-names = "lpo"; + vbat-supply = <®_vcc3v3>; + vddio-supply = <®_vcc3v3>; + device-wakeup-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */ + host-wakeup-gpios = <&pio 0 7 GPIO_ACTIVE_HIGH>; /* PA7 */ + shutdown-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */ + }; +}; + +&usb_otg { + status = "okay"; + dr_mode = "otg"; +}; + +&usbphy { + usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ + usb0_vbus-supply = <®_usb0_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi index e37c30e811d3..20217e2ca4d3 100644 --- a/arch/arm/boot/dts/sun8i-h3.dtsi +++ b/arch/arm/boot/dts/sun8i-h3.dtsi @@ -80,7 +80,7 @@ #cooling-cells = <2>; }; - cpu@1 { + cpu1: cpu@1 { compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <1>; @@ -90,7 +90,7 @@ #cooling-cells = <2>; }; - cpu@2 { + cpu2: cpu@2 { compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <2>; @@ -100,7 +100,7 @@ #cooling-cells = <2>; }; - cpu@3 { + cpu3: cpu@3 { compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <3>; @@ -111,6 +111,15 @@ }; }; + pmu { + compatible = "arm,cortex-a7-pmu"; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; + }; + timer { compatible = "arm,armv7-timer"; interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, @@ -120,6 +129,19 @@ }; soc { + deinterlace: deinterlace@1400000 { + compatible = "allwinner,sun8i-h3-deinterlace"; + reg = <0x01400000 0x20000>; + clocks = <&ccu CLK_BUS_DEINTERLACE>, + <&ccu CLK_DEINTERLACE>, + <&ccu CLK_DRAM_DEINTERLACE>; + clock-names = "bus", "mod", "ram"; + resets = <&ccu RST_BUS_DEINTERLACE>; + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&mbus 9>; + interconnect-names = "dma-mem"; + }; + syscon: system-control@1c00000 { compatible = "allwinner,sun8i-h3-system-control"; reg = <0x01c00000 0x1000>; @@ -153,6 +175,15 @@ allwinner,sram = <&ve_sram 1>; }; + crypto: crypto@1c15000 { + compatible = "allwinner,sun8i-h3-crypto"; + reg = <0x01c15000 0x1000>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>; + clock-names = "bus", "mod"; + resets = <&ccu RST_BUS_CE>; + }; + mali: gpu@1c40000 { compatible = "allwinner,sun8i-h3-mali", "arm,mali-400"; reg = <0x01c40000 0x10000>; @@ -177,6 +208,26 @@ assigned-clocks = <&ccu CLK_GPU>; assigned-clock-rates = <384000000>; }; + + ths: thermal-sensor@1c25000 { + compatible = "allwinner,sun8i-h3-ths"; + reg = <0x01c25000 0x400>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + resets = <&ccu RST_BUS_THS>; + clocks = <&ccu CLK_BUS_THS>, <&ccu CLK_THS>; + clock-names = "bus", "mod"; + nvmem-cells = <&ths_calibration>; + nvmem-cell-names = "calibration"; + #thermal-sensor-cells = <0>; + }; + }; + + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&ths 0>; + }; }; }; diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi index 6007d0cc252d..8f09a24b36ec 100644 --- a/arch/arm/boot/dts/sun8i-r40.dtsi +++ b/arch/arm/boot/dts/sun8i-r40.dtsi @@ -44,6 +44,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/sun8i-de2.h> #include <dt-bindings/clock/sun8i-r40-ccu.h> +#include <dt-bindings/clock/sun8i-tcon-top.h> #include <dt-bindings/reset/sun8i-r40-ccu.h> #include <dt-bindings/reset/sun8i-de2.h> @@ -78,25 +79,25 @@ #address-cells = <1>; #size-cells = <0>; - cpu@0 { + cpu0: cpu@0 { compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <0>; }; - cpu@1 { + cpu1: cpu@1 { compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <1>; }; - cpu@2 { + cpu2: cpu@2 { compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <2>; }; - cpu@3 { + cpu3: cpu@3 { compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <3>; @@ -119,10 +120,10 @@ compatible = "allwinner,sun8i-r40-de2-clk", "allwinner,sun8i-h3-de2-clk"; reg = <0x01000000 0x100000>; - clocks = <&ccu CLK_DE>, - <&ccu CLK_BUS_DE>; - clock-names = "mod", - "bus"; + clocks = <&ccu CLK_BUS_DE>, + <&ccu CLK_DE>; + clock-names = "bus", + "mod"; resets = <&ccu RST_BUS_DE>; #clock-cells = <1>; #reset-cells = <1>; @@ -180,6 +181,20 @@ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; }; + csi0: csi@1c09000 { + compatible = "allwinner,sun8i-r40-csi0", + "allwinner,sun7i-a20-csi0"; + reg = <0x01c09000 0x1000>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_CSI0>, <&ccu CLK_CSI_SCLK>, + <&ccu CLK_DRAM_CSI0>; + clock-names = "bus", "isp", "ram"; + resets = <&ccu RST_BUS_CSI0>; + interconnects = <&mbus 5>; + interconnect-names = "dma-mem"; + status = "disabled"; + }; + mmc0: mmc@1c0f000 { compatible = "allwinner,sun8i-r40-mmc", "allwinner,sun50i-a64-mmc"; @@ -266,6 +281,15 @@ #phy-cells = <1>; }; + crypto: crypto@1c15000 { + compatible = "allwinner,sun8i-r40-crypto"; + reg = <0x01c15000 0x1000>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>; + clock-names = "bus", "mod"; + resets = <&ccu RST_BUS_CE>; + }; + ehci1: usb@1c19000 { compatible = "allwinner,sun8i-r40-ehci", "generic-ehci"; reg = <0x01c19000 0x100>; @@ -273,6 +297,7 @@ clocks = <&ccu CLK_BUS_EHCI1>; resets = <&ccu RST_BUS_EHCI1>; phys = <&usbphy 1>; + phy-names = "usb"; status = "disabled"; }; @@ -284,6 +309,7 @@ <&ccu CLK_USB_OHCI1>; resets = <&ccu RST_BUS_OHCI1>; phys = <&usbphy 1>; + phy-names = "usb"; status = "disabled"; }; @@ -294,6 +320,7 @@ clocks = <&ccu CLK_BUS_EHCI2>; resets = <&ccu RST_BUS_EHCI2>; phys = <&usbphy 2>; + phy-names = "usb"; status = "disabled"; }; @@ -305,6 +332,7 @@ <&ccu CLK_USB_OHCI2>; resets = <&ccu RST_BUS_OHCI2>; phys = <&usbphy 2>; + phy-names = "usb"; status = "disabled"; }; @@ -342,6 +370,20 @@ function = "clk_out_a"; }; + /omit-if-no-ref/ + csi0_8bits_pins: csi0-8bits-pins { + pins = "PE0", "PE2", "PE3", "PE4", "PE5", + "PE6", "PE7", "PE8", "PE9", "PE10", + "PE11"; + function = "csi0"; + }; + + /omit-if-no-ref/ + csi0_mclk_pin: csi0-mclk-pin { + pins = "PE1"; + function = "csi0"; + }; + gmac_rgmii_pins: gmac-rgmii-pins { pins = "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", @@ -360,6 +402,26 @@ function = "i2c0"; }; + i2c1_pins: i2c1-pins { + pins = "PB18", "PB19"; + function = "i2c1"; + }; + + i2c2_pins: i2c2-pins { + pins = "PB20", "PB21"; + function = "i2c2"; + }; + + i2c3_pins: i2c3-pins { + pins = "PI0", "PI1"; + function = "i2c3"; + }; + + i2c4_pins: i2c4-pins { + pins = "PI2", "PI3"; + function = "i2c4"; + }; + mmc0_pins: mmc0-pins { pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5"; @@ -385,6 +447,36 @@ bias-pull-up; }; + /omit-if-no-ref/ + spi0_pc_pins: spi0-pc-pins { + pins = "PC0", "PC1", "PC2"; + function = "spi0"; + }; + + /omit-if-no-ref/ + spi0_cs0_pc_pin: spi0-cs0-pc-pin { + pins = "PC23"; + function = "spi0"; + }; + + /omit-if-no-ref/ + spi1_pi_pins: spi1-pi-pins { + pins = "PI17", "PI18", "PI19"; + function = "spi1"; + }; + + /omit-if-no-ref/ + spi1_cs0_pi_pin: spi1-cs0-pi-pin { + pins = "PI16"; + function = "spi1"; + }; + + /omit-if-no-ref/ + spi1_cs1_pi_pin: spi1-cs1-pi-pin { + pins = "PI15"; + function = "spi1"; + }; + uart0_pb_pins: uart0-pb-pins { pins = "PB22", "PB23"; function = "uart0"; @@ -404,6 +496,8 @@ wdt: watchdog@1c20c90 { compatible = "allwinner,sun4i-a10-wdt"; reg = <0x01c20c90 0x10>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&osc24M>; }; uart0: serial@1c28000 { @@ -513,6 +607,8 @@ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_BUS_I2C1>; resets = <&ccu RST_BUS_I2C1>; + pinctrl-0 = <&i2c1_pins>; + pinctrl-names = "default"; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -524,6 +620,8 @@ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_BUS_I2C2>; resets = <&ccu RST_BUS_I2C2>; + pinctrl-0 = <&i2c2_pins>; + pinctrl-names = "default"; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -535,6 +633,8 @@ interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_BUS_I2C3>; resets = <&ccu RST_BUS_I2C3>; + pinctrl-0 = <&i2c3_pins>; + pinctrl-names = "default"; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -546,6 +646,60 @@ interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_BUS_I2C4>; resets = <&ccu RST_BUS_I2C4>; + pinctrl-0 = <&i2c4_pins>; + pinctrl-names = "default"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + spi0: spi@1c05000 { + compatible = "allwinner,sun8i-r40-spi", + "allwinner,sun8i-h3-spi"; + reg = <0x01c05000 0x1000>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>; + clock-names = "ahb", "mod"; + resets = <&ccu RST_BUS_SPI0>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + spi1: spi@1c06000 { + compatible = "allwinner,sun8i-r40-spi", + "allwinner,sun8i-h3-spi"; + reg = <0x01c06000 0x1000>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>; + clock-names = "ahb", "mod"; + resets = <&ccu RST_BUS_SPI1>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + spi2: spi@1c07000 { + compatible = "allwinner,sun8i-r40-spi", + "allwinner,sun8i-h3-spi"; + reg = <0x01c07000 0x1000>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_SPI2>, <&ccu CLK_SPI2>; + clock-names = "ahb", "mod"; + resets = <&ccu RST_BUS_SPI2>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + spi3: spi@1c0f000 { + compatible = "allwinner,sun8i-r40-spi", + "allwinner,sun8i-h3-spi"; + reg = <0x01c0f000 0x1000>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_SPI3>, <&ccu CLK_SPI3>; + clock-names = "ahb", "mod"; + resets = <&ccu RST_BUS_SPI3>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -581,6 +735,14 @@ }; }; + mbus: dram-controller@1c62000 { + compatible = "allwinner,sun8i-r40-mbus"; + reg = <0x01c62000 0x1000>; + clocks = <&ccu 155>; + dma-ranges = <0x00000000 0x40000000 0x80000000>; + #interconnect-cells = <1>; + }; + tcon_top: tcon-top@1c70000 { compatible = "allwinner,sun8i-r40-tcon-top"; reg = <0x01c70000 0x1000>; @@ -703,7 +865,7 @@ compatible = "allwinner,sun8i-r40-tcon-tv"; reg = <0x01c73000 0x1000>; interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu CLK_BUS_TCON_TV0>, <&tcon_top 0>; + clocks = <&ccu CLK_BUS_TCON_TV0>, <&tcon_top CLK_TCON_TOP_TV0>; clock-names = "ahb", "tcon-ch1"; resets = <&ccu RST_BUS_TCON_TV0>; reset-names = "lcd"; @@ -746,7 +908,7 @@ compatible = "allwinner,sun8i-r40-tcon-tv"; reg = <0x01c74000 0x1000>; interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu CLK_BUS_TCON_TV1>, <&tcon_top 1>; + clocks = <&ccu CLK_BUS_TCON_TV1>, <&tcon_top CLK_TCON_TOP_TV1>; clock-names = "ahb", "tcon-ch1"; resets = <&ccu RST_BUS_TCON_TV1>; reset-names = "lcd"; @@ -788,7 +950,7 @@ gic: interrupt-controller@1c81000 { compatible = "arm,gic-400"; reg = <0x01c81000 0x1000>, - <0x01c82000 0x1000>, + <0x01c82000 0x2000>, <0x01c84000 0x2000>, <0x01c86000 0x2000>; interrupt-controller; @@ -808,7 +970,7 @@ resets = <&ccu RST_BUS_HDMI1>; reset-names = "ctrl"; phys = <&hdmi_phy>; - phy-names = "hdmi-phy"; + phy-names = "phy"; status = "disabled"; ports { @@ -833,7 +995,7 @@ compatible = "allwinner,sun8i-r40-hdmi-phy"; reg = <0x01ef0000 0x10000>; clocks = <&ccu CLK_BUS_HDMI1>, <&ccu CLK_HDMI_SLOW>, - <&ccu 7>, <&ccu 16>; + <&ccu CLK_PLL_VIDEO0>, <&ccu CLK_PLL_VIDEO1>; clock-names = "bus", "mod", "pll-0", "pll-1"; resets = <&ccu RST_BUS_HDMI0>; reset-names = "phy"; @@ -841,6 +1003,15 @@ }; }; + pmu { + compatible = "arm,cortex-a7-pmu"; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; + }; + timer { compatible = "arm,armv7-timer"; interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, diff --git a/arch/arm/boot/dts/sun8i-s3-lichee-zero-plus.dts b/arch/arm/boot/dts/sun8i-s3-lichee-zero-plus.dts new file mode 100644 index 000000000000..d18192d51d1b --- /dev/null +++ b/arch/arm/boot/dts/sun8i-s3-lichee-zero-plus.dts @@ -0,0 +1,53 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2019 Icenowy Zheng <icenowy@aosc.io> + */ + +/dts-v1/; +#include "sun8i-v3.dtsi" + +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Sipeed Lichee Zero Plus"; + compatible = "sipeed,lichee-zero-plus", "sochip,s3", + "allwinner,sun8i-v3"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + reg_vcc3v3: vcc3v3 { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&mmc0 { + broken-cd; + bus-width = <4>; + vmmc-supply = <®_vcc3v3>; + status = "okay"; +}; + +&uart0 { + pinctrl-0 = <&uart0_pb_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&usb_otg { + dr_mode = "peripheral"; + status = "okay"; +}; + +&usbphy { + usb0_id_det-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun8i-v3.dtsi b/arch/arm/boot/dts/sun8i-v3.dtsi new file mode 100644 index 000000000000..6ae8645ade50 --- /dev/null +++ b/arch/arm/boot/dts/sun8i-v3.dtsi @@ -0,0 +1,14 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2019 Icenowy Zheng <icenowy@aosc.io> + */ + +#include "sun8i-v3s.dtsi" + +&ccu { + compatible = "allwinner,sun8i-v3-ccu"; +}; + +&pio { + compatible = "allwinner,sun8i-v3-pinctrl"; +}; diff --git a/arch/arm/boot/dts/sun8i-v3s.dtsi b/arch/arm/boot/dts/sun8i-v3s.dtsi index d7aef128acb3..81ea50838cd5 100644 --- a/arch/arm/boot/dts/sun8i-v3s.dtsi +++ b/arch/arm/boot/dts/sun8i-v3s.dtsi @@ -106,10 +106,10 @@ display_clocks: clock@1000000 { compatible = "allwinner,sun8i-v3s-de2-clk"; reg = <0x01000000 0x100000>; - clocks = <&ccu CLK_DE>, - <&ccu CLK_BUS_DE>; - clock-names = "mod", - "bus"; + clocks = <&ccu CLK_BUS_DE>, + <&ccu CLK_DE>; + clock-names = "bus", + "mod"; resets = <&ccu RST_BUS_DE>; #clock-cells = <1>; #reset-cells = <1>; @@ -123,8 +123,6 @@ clock-names = "bus", "mod"; resets = <&display_clocks 0>; - assigned-clocks = <&display_clocks 6>; - assigned-clock-rates = <150000000>; ports { #address-cells = <1>; @@ -327,10 +325,11 @@ }; timer@1c20c00 { - compatible = "allwinner,sun4i-a10-timer"; + compatible = "allwinner,sun8i-v3s-timer"; reg = <0x01c20c00 0xa0>; interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; clocks = <&osc24M>; }; @@ -338,6 +337,7 @@ compatible = "allwinner,sun6i-a31-wdt"; reg = <0x01c20ca0 0x20>; interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&osc24M>; }; lradc: lradc@1c22800 { diff --git a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts index 18156ffa3ce9..d3b337b043a1 100644 --- a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts +++ b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts @@ -128,14 +128,10 @@ &gmac { pinctrl-names = "default"; pinctrl-0 = <&gmac_rgmii_pins>; - phy = <&phy1>; + phy-handle = <&phy1>; phy-mode = "rgmii"; phy-supply = <®_cldo1>; status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; }; &i2c3 { @@ -144,6 +140,12 @@ status = "okay"; }; +&mdio { + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>; diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/sun9i-a80-optimus.dts index 2ed28d9e2787..bbc6335e5631 100644 --- a/arch/arm/boot/dts/sun9i-a80-optimus.dts +++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts @@ -123,11 +123,13 @@ &gmac { pinctrl-names = "default"; pinctrl-0 = <&gmac_rgmii_pins>; - phy = <&phy1>; + phy-handle = <&phy1>; phy-mode = "rgmii"; phy-supply = <®_cldo1>; status = "okay"; +}; +&mdio { phy1: ethernet-phy@1 { reg = <1>; }; diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi index 0c1eec9000e3..ce4fa6706d06 100644 --- a/arch/arm/boot/dts/sun9i-a80.dtsi +++ b/arch/arm/boot/dts/sun9i-a80.dtsi @@ -331,8 +331,12 @@ snps,fixed-burst; snps,force_sf_dma_mode; status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; + + mdio: mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + }; }; ehci0: usb@a00000 { @@ -342,6 +346,7 @@ clocks = <&usb_clocks CLK_BUS_HCI0>; resets = <&usb_clocks RST_USB0_HCI>; phys = <&usbphy1>; + phy-names = "usb"; status = "disabled"; }; @@ -353,6 +358,7 @@ <&usb_clocks CLK_USB_OHCI0>; resets = <&usb_clocks RST_USB0_HCI>; phys = <&usbphy1>; + phy-names = "usb"; status = "disabled"; }; @@ -374,22 +380,23 @@ clocks = <&usb_clocks CLK_BUS_HCI1>; resets = <&usb_clocks RST_USB1_HCI>; phys = <&usbphy2>; + phy-names = "usb"; status = "disabled"; }; usbphy2: phy@a01800 { compatible = "allwinner,sun9i-a80-usb-phy"; reg = <0x00a01800 0x4>; - clocks = <&usb_clocks CLK_USB1_HSIC>, + clocks = <&usb_clocks CLK_USB1_PHY>, <&usb_clocks CLK_USB_HSIC>, - <&usb_clocks CLK_USB1_PHY>; - clock-names = "hsic_480M", + <&usb_clocks CLK_USB1_HSIC>; + clock-names = "phy", "hsic_12M", - "phy"; - resets = <&usb_clocks RST_USB1_HSIC>, - <&usb_clocks RST_USB1_PHY>; - reset-names = "hsic", - "phy"; + "hsic_480M"; + resets = <&usb_clocks RST_USB1_PHY>, + <&usb_clocks RST_USB1_HSIC>; + reset-names = "phy", + "hsic"; status = "disabled"; #phy-cells = <0>; /* usb1 is always used with HSIC */ @@ -403,6 +410,7 @@ clocks = <&usb_clocks CLK_BUS_HCI2>; resets = <&usb_clocks RST_USB2_HCI>; phys = <&usbphy3>; + phy-names = "usb"; status = "disabled"; }; @@ -414,22 +422,23 @@ <&usb_clocks CLK_USB_OHCI2>; resets = <&usb_clocks RST_USB2_HCI>; phys = <&usbphy3>; + phy-names = "usb"; status = "disabled"; }; usbphy3: phy@a02800 { compatible = "allwinner,sun9i-a80-usb-phy"; reg = <0x00a02800 0x4>; - clocks = <&usb_clocks CLK_USB2_HSIC>, + clocks = <&usb_clocks CLK_USB2_PHY>, <&usb_clocks CLK_USB_HSIC>, - <&usb_clocks CLK_USB2_PHY>; - clock-names = "hsic_480M", + <&usb_clocks CLK_USB2_HSIC>; + clock-names = "phy", "hsic_12M", - "phy"; - resets = <&usb_clocks RST_USB2_HSIC>, - <&usb_clocks RST_USB2_PHY>; - reset-names = "hsic", - "phy"; + "hsic_480M"; + resets = <&usb_clocks RST_USB2_PHY>, + <&usb_clocks RST_USB2_HSIC>; + reset-names = "phy", + "hsic"; status = "disabled"; #phy-cells = <0>; }; @@ -448,6 +457,15 @@ reg = <0x01700000 0x100>; }; + crypto: crypto@1c02000 { + compatible = "allwinner,sun9i-a80-crypto"; + reg = <0x01c02000 0x1000>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + resets = <&ccu RST_BUS_SS>; + clocks = <&ccu CLK_BUS_SS>, <&ccu CLK_SS>; + clock-names = "bus", "mod"; + }; + mmc0: mmc@1c0f000 { compatible = "allwinner,sun9i-a80-mmc"; reg = <0x01c0f000 0x1000>; @@ -512,9 +530,7 @@ compatible = "allwinner,sun9i-a80-mmc-config-clk"; reg = <0x01c13000 0x10>; clocks = <&ccu CLK_BUS_MMC>; - clock-names = "ahb"; resets = <&ccu RST_BUS_MMC>; - reset-names = "ahb"; #clock-cells = <1>; #reset-cells = <1>; clock-output-names = "mmc0_config", "mmc1_config", @@ -862,8 +878,12 @@ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_BUS_LCD0>, <&ccu CLK_LCD0>; clock-names = "ahb", "tcon-ch0"; - resets = <&ccu RST_BUS_LCD0>, <&ccu RST_BUS_EDP>; - reset-names = "lcd", "edp"; + resets = <&ccu RST_BUS_LCD0>, + <&ccu RST_BUS_EDP>, + <&ccu RST_BUS_LVDS>; + reset-names = "lcd", + "edp", + "lvds"; clock-output-names = "tcon0-pixel-clock"; #clock-cells = <0>; @@ -938,6 +958,7 @@ compatible = "allwinner,sun6i-a31-wdt"; reg = <0x06000ca0 0x20>; interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&osc24M>; }; pio: pinctrl@6000800 { @@ -1145,6 +1166,7 @@ compatible = "allwinner,sun6i-a31-wdt"; reg = <0x08001000 0x20>; interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&osc24M>; }; prcm@8001400 { @@ -1167,7 +1189,7 @@ }; r_ir: ir@8002000 { - compatible = "allwinner,sun5i-a13-ir"; + compatible = "allwinner,sun6i-a31-ir"; interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&r_ir_pins>; diff --git a/arch/arm/boot/dts/sunxi-h3-h5-emlid-neutis.dtsi b/arch/arm/boot/dts/sunxi-h3-h5-emlid-neutis.dtsi new file mode 100644 index 000000000000..fc67e30fe212 --- /dev/null +++ b/arch/arm/boot/dts/sunxi-h3-h5-emlid-neutis.dtsi @@ -0,0 +1,170 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * DTSI for Emlid Neutis SoMs. + * + * Copyright (C) 2019 Georgii Staroselskii <georgii.staroselskii@emlid.com> + */ + +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> + +/ { + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&pio 2 7 GPIO_ACTIVE_LOW>; /* PC7 */ + post-power-on-delay-ms = <200>; + clocks = <&rtc 1>; + clock-names = "ext_clock"; + }; +}; + +&cpu0 { + cpu-supply = <&vdd_cpux>; +}; + +®_usb0_vbus { + gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */ + status = "okay"; +}; + + +&de { + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&ohci2 { + status = "okay"; +}; + +&ohci3 { + status = "okay"; +}; + + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&ehci2 { + status = "okay"; +}; + +&ehci3 { + status = "okay"; +}; + +&mmc0 { + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ + status = "okay"; +}; + + +&mmc1 { + vmmc-supply = <®_vcc3v3>; + vqmmc-supply = <®_vcc3v3>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; + + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&r_pio>; + interrupts = <0 5 IRQ_TYPE_LEVEL_LOW>; /* PL5 */ + interrupt-names = "host-wake"; + }; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_8bit_pins>; + vmmc-supply = <®_vcc3v3>; + bus-width = <8>; + non-removable; + cap-mmc-hw-reset; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pa_pins>; + status = "okay"; +}; + + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&rtc 1>; + clock-names = "lpo"; + vbat-supply = <®_vcc3v3>; + vddio-supply = <®_vcc3v3>; + shutdown-gpios = <&pio 2 4 GPIO_ACTIVE_HIGH>; /* PC4 */ + device-wakeup-gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */ + }; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; + status = "okay"; +}; + +&usbphy { + usb0_id_det-gpios = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */ + usb0_vbus-supply = <®_usb0_vbus>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&codec { + allwinner,audio-routing = + "Line Out", "LINEOUT", + "LINEIN", "Line In", + "MIC1", "Mic", + "MIC2", "Mic", + "Mic", "MBIAS"; +}; + +&i2c0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi index 84977d4eb97a..5e9c3060aa08 100644 --- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi +++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi @@ -109,15 +109,16 @@ compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; + dma-ranges; ranges; display_clocks: clock@1000000 { /* compatible is in per SoC .dtsi file */ reg = <0x01000000 0x100000>; - clocks = <&ccu CLK_DE>, - <&ccu CLK_BUS_DE>; - clock-names = "mod", - "bus"; + clocks = <&ccu CLK_BUS_DE>, + <&ccu CLK_DE>; + clock-names = "bus", + "mod"; resets = <&ccu RST_BUS_DE>; #clock-cells = <1>; #reset-cells = <1>; @@ -230,6 +231,12 @@ sid: eeprom@1c14000 { /* compatible is in per SoC .dtsi file */ reg = <0x1c14000 0x400>; + #address-cells = <1>; + #size-cells = <1>; + + ths_calibration: thermal-sensor-calibration@34 { + reg = <0x34 4>; + }; }; usb_otg: usb@1c19000 { @@ -304,6 +311,7 @@ clocks = <&ccu CLK_BUS_EHCI1>, <&ccu CLK_BUS_OHCI1>; resets = <&ccu RST_BUS_EHCI1>, <&ccu RST_BUS_OHCI1>; phys = <&usbphy 1>; + phy-names = "usb"; status = "disabled"; }; @@ -315,6 +323,7 @@ <&ccu CLK_USB_OHCI1>; resets = <&ccu RST_BUS_EHCI1>, <&ccu RST_BUS_OHCI1>; phys = <&usbphy 1>; + phy-names = "usb"; status = "disabled"; }; @@ -325,6 +334,7 @@ clocks = <&ccu CLK_BUS_EHCI2>, <&ccu CLK_BUS_OHCI2>; resets = <&ccu RST_BUS_EHCI2>, <&ccu RST_BUS_OHCI2>; phys = <&usbphy 2>; + phy-names = "usb"; status = "disabled"; }; @@ -336,6 +346,7 @@ <&ccu CLK_USB_OHCI2>; resets = <&ccu RST_BUS_EHCI2>, <&ccu RST_BUS_OHCI2>; phys = <&usbphy 2>; + phy-names = "usb"; status = "disabled"; }; @@ -346,6 +357,7 @@ clocks = <&ccu CLK_BUS_EHCI3>, <&ccu CLK_BUS_OHCI3>; resets = <&ccu RST_BUS_EHCI3>, <&ccu RST_BUS_OHCI3>; phys = <&usbphy 3>; + phy-names = "usb"; status = "disabled"; }; @@ -357,6 +369,7 @@ <&ccu CLK_USB_OHCI3>; resets = <&ccu RST_BUS_EHCI3>, <&ccu RST_BUS_OHCI3>; phys = <&usbphy 3>; + phy-names = "usb"; status = "disabled"; }; @@ -472,6 +485,11 @@ function = "uart2"; }; + uart2_rts_cts_pins: uart2-rts-cts-pins { + pins = "PA2", "PA3"; + function = "uart2"; + }; + uart3_pins: uart3-pins { pins = "PA13", "PA14"; function = "uart3"; @@ -484,7 +502,7 @@ }; timer@1c20c00 { - compatible = "allwinner,sun4i-a10-timer"; + compatible = "allwinner,sun8i-a23-timer"; reg = <0x01c20c00 0xa0>; interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; @@ -538,6 +556,14 @@ }; }; + mbus: dram-controller@1c62000 { + compatible = "allwinner,sun8i-h3-mbus"; + reg = <0x01c62000 0x1000>; + clocks = <&ccu CLK_MBUS>; + dma-ranges = <0x00000000 0x40000000 0xc0000000>; + #interconnect-cells = <1>; + }; + spi0: spi@1c68000 { compatible = "allwinner,sun8i-h3-spi"; reg = <0x01c68000 0x1000>; @@ -574,6 +600,7 @@ compatible = "allwinner,sun6i-a31-wdt"; reg = <0x01c20ca0 0x20>; interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&osc24M>; }; spdif: spdif@1c21000 { @@ -765,7 +792,7 @@ resets = <&ccu RST_BUS_HDMI1>; reset-names = "ctrl"; phys = <&hdmi_phy>; - phy-names = "hdmi-phy"; + phy-names = "phy"; status = "disabled"; ports { @@ -790,7 +817,7 @@ compatible = "allwinner,sun8i-h3-hdmi-phy"; reg = <0x01ef0000 0x10000>; clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>, - <&ccu 6>; + <&ccu CLK_PLL_VIDEO>; clock-names = "bus", "mod", "pll-0"; resets = <&ccu RST_BUS_HDMI0>; reset-names = "phy"; @@ -810,7 +837,8 @@ r_ccu: clock@1f01400 { compatible = "allwinner,sun8i-h3-r-ccu"; reg = <0x01f01400 0x100>; - clocks = <&osc24M>, <&rtc 0>, <&rtc 2>, <&ccu 9>; + clocks = <&osc24M>, <&rtc 0>, <&rtc 2>, + <&ccu CLK_PLL_PERIPH0>; clock-names = "hosc", "losc", "iosc", "pll-periph"; #clock-cells = <1>; #reset-cells = <1>; @@ -822,7 +850,7 @@ }; ir: ir@1f02000 { - compatible = "allwinner,sun5i-a13-ir"; + compatible = "allwinner,sun6i-a31-ir"; clocks = <&r_ccu CLK_APB0_IR>, <&r_ccu CLK_IR>; clock-names = "apb", "ir"; resets = <&r_ccu RST_APB0_IR>; diff --git a/arch/arm/boot/dts/sunxi-libretech-all-h3-it.dtsi b/arch/arm/boot/dts/sunxi-libretech-all-h3-it.dtsi new file mode 100644 index 000000000000..204fba3614f9 --- /dev/null +++ b/arch/arm/boot/dts/sunxi-libretech-all-h3-it.dtsi @@ -0,0 +1,180 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (C) 2019 Chen-Yu Tsai <wens@csie.org> + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + aliases { + serial0 = &uart0; + spi0 = &spi0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + connector { + compatible = "hdmi-connector"; + type = "d"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + + status_led { + label = "librecomputer:blue:status"; + gpios = <&pio 0 7 GPIO_ACTIVE_HIGH>; /* PA7 */ + }; + }; + + reg_vcc3v3: vcc3v3 { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <®_vcc5v0>; + }; + + /* This represents the board's 5V input */ + reg_vcc5v0: vcc5v0 { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + reg_vcc_dram: vcc-dram { + compatible = "regulator-fixed"; + regulator-name = "vcc-dram"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <®_vcc5v0>; + gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */ + enable-active-high; + }; + + reg_vcc_io: vcc-io { + compatible = "regulator-fixed"; + regulator-name = "vcc-io"; + /* This is simply a MOSFET switch */ + regulator-always-on; + regulator-boot-on; + vin-supply = <®_vcc3v3>; + gpio = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL5 */ + }; + + reg_vcc_usbwifi: vcc-usbwifi { + compatible = "regulator-fixed"; + regulator-name = "vcc-usbwifi"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <®_vcc5v0>; + gpio = <&pio 6 4 GPIO_ACTIVE_HIGH>; /* PG4 */ + enable-active-high; + }; + + reg_vdd_cpux: vdd-cpux { + compatible = "regulator-fixed"; + regulator-name = "vdd-cpux"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <®_vcc5v0>; + gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */ + enable-active-high; + }; +}; + +&cpu0 { + cpu-supply = <®_vdd_cpux>; +}; + +&cpu1 { + cpu-supply = <®_vdd_cpux>; +}; + +&cpu2 { + cpu-supply = <®_vdd_cpux>; +}; + +&cpu3 { + cpu-supply = <®_vdd_cpux>; +}; + +&de { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&mmc0 { + vmmc-supply = <®_vcc_io>; + bus-width = <4>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ + status = "okay"; +}; + +&pio { + vcc-pa-supply = <®_vcc_io>; + vcc-pc-supply = <®_vcc_io>; + vcc-pd-supply = <®_vcc_io>; + vcc-pe-supply = <®_vcc_io>; + vcc-pf-supply = <®_vcc_io>; + vcc-pg-supply = <®_vcc_io>; +}; + +&r_pio { + vcc-pl-supply = <®_vcc3v3>; +}; + +&spi0 { + status = "okay"; + + spiflash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pa_pins>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "peripheral"; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_vcc_usbwifi>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/tegra124-apalis-emc.dtsi b/arch/arm/boot/dts/tegra124-apalis-emc.dtsi index d18eaf4a4a3a..32401457ae71 100644 --- a/arch/arm/boot/dts/tegra124-apalis-emc.dtsi +++ b/arch/arm/boot/dts/tegra124-apalis-emc.dtsi @@ -84,7 +84,7 @@ }; }; - emc@7001b000 { + external-memory-controller@7001b000 { emc-timings-1 { nvidia,ram-code = <1>; diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1-emc.dtsi b/arch/arm/boot/dts/tegra124-jetson-tk1-emc.dtsi index 784a529e1f19..861d3f22116b 100644 --- a/arch/arm/boot/dts/tegra124-jetson-tk1-emc.dtsi +++ b/arch/arm/boot/dts/tegra124-jetson-tk1-emc.dtsi @@ -79,7 +79,7 @@ }; }; - emc@7001b000 { + external-memory-controller@7001b000 { emc-timings-3 { nvidia,ram-code = <3>; diff --git a/arch/arm/boot/dts/tegra124-nyan-big-emc.dtsi b/arch/arm/boot/dts/tegra124-nyan-big-emc.dtsi index 9af21fe93a5c..c91647d13a50 100644 --- a/arch/arm/boot/dts/tegra124-nyan-big-emc.dtsi +++ b/arch/arm/boot/dts/tegra124-nyan-big-emc.dtsi @@ -1,5 +1,9 @@ // SPDX-License-Identifier: GPL-2.0 / { + apbmisc@70000800 { + nvidia,long-ram-code; + }; + clock@60006000 { emc-timings-1 { nvidia,ram-code = <1>; @@ -52,7 +56,154 @@ clocks = <&tegra_car TEGRA124_CLK_PLL_M>; clock-names = "emc-parent"; }; - /* TODO: Add 528MHz frequency */ + timing-528000000 { + clock-frequency = <528000000>; + nvidia,parent-clock-frequency = <528000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_M_UD>; + clock-names = "emc-parent"; + }; + timing-600000000 { + clock-frequency = <600000000>; + nvidia,parent-clock-frequency = <600000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_C_UD>; + clock-names = "emc-parent"; + }; + timing-792000000 { + clock-frequency = <792000000>; + nvidia,parent-clock-frequency = <792000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_M_UD>; + clock-names = "emc-parent"; + }; + }; + + emc-timings-4 { + nvidia,ram-code = <4>; + + timing-12750000 { + clock-frequency = <12750000>; + nvidia,parent-clock-frequency = <408000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_P>; + clock-names = "emc-parent"; + }; + timing-20400000 { + clock-frequency = <20400000>; + nvidia,parent-clock-frequency = <408000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_P>; + clock-names = "emc-parent"; + }; + timing-40800000 { + clock-frequency = <40800000>; + nvidia,parent-clock-frequency = <408000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_P>; + clock-names = "emc-parent"; + }; + timing-68000000 { + clock-frequency = <68000000>; + nvidia,parent-clock-frequency = <408000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_P>; + clock-names = "emc-parent"; + }; + timing-102000000 { + clock-frequency = <102000000>; + nvidia,parent-clock-frequency = <408000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_P>; + clock-names = "emc-parent"; + }; + timing-204000000 { + clock-frequency = <204000000>; + nvidia,parent-clock-frequency = <408000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_P>; + clock-names = "emc-parent"; + }; + timing-300000000 { + clock-frequency = <300000000>; + nvidia,parent-clock-frequency = <600000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_C>; + clock-names = "emc-parent"; + }; + timing-396000000 { + clock-frequency = <396000000>; + nvidia,parent-clock-frequency = <792000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_M>; + clock-names = "emc-parent"; + }; + timing-528000000 { + clock-frequency = <528000000>; + nvidia,parent-clock-frequency = <528000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_M_UD>; + clock-names = "emc-parent"; + }; + timing-600000000 { + clock-frequency = <600000000>; + nvidia,parent-clock-frequency = <600000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_C_UD>; + clock-names = "emc-parent"; + }; + timing-792000000 { + clock-frequency = <792000000>; + nvidia,parent-clock-frequency = <792000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_M_UD>; + clock-names = "emc-parent"; + }; + }; + + emc-timings-6 { + nvidia,ram-code = <6>; + + timing-12750000 { + clock-frequency = <12750000>; + nvidia,parent-clock-frequency = <408000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_P>; + clock-names = "emc-parent"; + }; + timing-20400000 { + clock-frequency = <20400000>; + nvidia,parent-clock-frequency = <408000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_P>; + clock-names = "emc-parent"; + }; + timing-40800000 { + clock-frequency = <40800000>; + nvidia,parent-clock-frequency = <408000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_P>; + clock-names = "emc-parent"; + }; + timing-68000000 { + clock-frequency = <68000000>; + nvidia,parent-clock-frequency = <408000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_P>; + clock-names = "emc-parent"; + }; + timing-102000000 { + clock-frequency = <102000000>; + nvidia,parent-clock-frequency = <408000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_P>; + clock-names = "emc-parent"; + }; + timing-204000000 { + clock-frequency = <204000000>; + nvidia,parent-clock-frequency = <408000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_P>; + clock-names = "emc-parent"; + }; + timing-300000000 { + clock-frequency = <300000000>; + nvidia,parent-clock-frequency = <600000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_C>; + clock-names = "emc-parent"; + }; + timing-396000000 { + clock-frequency = <396000000>; + nvidia,parent-clock-frequency = <792000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_M>; + clock-names = "emc-parent"; + }; + timing-528000000 { + clock-frequency = <528000000>; + nvidia,parent-clock-frequency = <528000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_M_UD>; + clock-names = "emc-parent"; + }; timing-600000000 { clock-frequency = <600000000>; nvidia,parent-clock-frequency = <600000000>; @@ -68,7 +219,7 @@ }; }; - emc@7001b000 { + external-memory-controller@7001b000 { emc-timings-1 { nvidia,ram-code = <1>; @@ -94,149 +245,149 @@ nvidia,emc-zcal-interval = <0x00000000>; nvidia,emc-configuration = < - 0x00000000 - 0x00000003 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000004 - 0x0000000a - 0x00000003 - 0x0000000b - 0x00000000 - 0x00000000 - 0x00000003 - 0x00000003 - 0x00000000 - 0x00000006 - 0x00000006 - 0x00000006 - 0x00000002 - 0x00000000 - 0x00000005 - 0x00000005 - 0x00010000 - 0x00000003 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000004 - 0x0000000c - 0x0000000d - 0x0000000f - 0x00000060 - 0x00000000 - 0x00000018 - 0x00000002 - 0x00000002 - 0x00000001 - 0x00000000 - 0x00000007 - 0x0000000f - 0x00000005 - 0x00000005 - 0x00000004 - 0x00000005 - 0x00000004 - 0x00000000 - 0x00000000 - 0x00000005 - 0x00000005 - 0x00000064 - 0x00000000 - 0x00000000 - 0x00000000 - 0x106aa298 - 0x002c00a0 - 0x00008000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00004000 - 0x00000000 - 0x00000000 - 0x00004000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x000fc000 - 0x000fc000 - 0x000fc000 - 0x000fc000 - 0x0000fc00 - 0x0000fc00 - 0x0000fc00 - 0x0000fc00 - 0x10000280 - 0x00000000 - 0x00111111 - 0x00000000 - 0x00000000 - 0x77ffc081 - 0x00000303 - 0x81f1f108 - 0x07070004 - 0x0000003f - 0x016eeeee - 0x51451400 - 0x00514514 - 0x00514514 - 0x51451400 - 0x0000003f - 0x00000007 - 0x00000000 - 0x00000042 - 0x000c000c - 0x00000000 - 0x00000003 - 0x0000f2f3 - 0x800001c5 - 0x0000000a + 0x00000000 /* EMC_RC */ + 0x00000003 /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x00000000 /* EMC_RAS */ + 0x00000000 /* EMC_RP */ + 0x00000004 /* EMC_R2W */ + 0x0000000a /* EMC_W2R */ + 0x00000003 /* EMC_R2P */ + 0x0000000b /* EMC_W2P */ + 0x00000000 /* EMC_RD_RCD */ + 0x00000000 /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000003 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000006 /* EMC_WDV */ + 0x00000006 /* EMC_WDV_MASK */ + 0x00000006 /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000005 /* EMC_EINPUT */ + 0x00000005 /* EMC_EINPUT_DURATION */ + 0x00010000 /* EMC_PUTERM_EXTRA */ + 0x00000003 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000004 /* EMC_QRST */ + 0x0000000c /* EMC_QSAFE */ + 0x0000000d /* EMC_RDV */ + 0x0000000f /* EMC_RDV_MASK */ + 0x00000060 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x00000018 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x00000002 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000007 /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x00000005 /* EMC_TXSR */ + 0x00000005 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000005 /* EMC_TCKESR */ + 0x00000004 /* EMC_TPD */ + 0x00000000 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000005 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x00000064 /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x106aa298 /* EMC_FBIO_CFG5 */ + 0x002c00a0 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x00064000 /* EMC_DLL_XFORM_DQS0 */ + 0x00064000 /* EMC_DLL_XFORM_DQS1 */ + 0x00064000 /* EMC_DLL_XFORM_DQS2 */ + 0x00064000 /* EMC_DLL_XFORM_DQS3 */ + 0x00064000 /* EMC_DLL_XFORM_DQS4 */ + 0x00064000 /* EMC_DLL_XFORM_DQS5 */ + 0x00064000 /* EMC_DLL_XFORM_DQS6 */ + 0x00064000 /* EMC_DLL_XFORM_DQS7 */ + 0x00064000 /* EMC_DLL_XFORM_DQS8 */ + 0x00064000 /* EMC_DLL_XFORM_DQS9 */ + 0x00064000 /* EMC_DLL_XFORM_DQS10 */ + 0x00064000 /* EMC_DLL_XFORM_DQS11 */ + 0x00064000 /* EMC_DLL_XFORM_DQS12 */ + 0x00064000 /* EMC_DLL_XFORM_DQS13 */ + 0x00064000 /* EMC_DLL_XFORM_DQS14 */ + 0x00064000 /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR0 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR1 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR3 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR4 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS15 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ0 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ1 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ2 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ3 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ4 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ5 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ6 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ7 */ + 0x10000280 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc081 /* EMC_XM2CLKPADCTRL */ + 0x00000303 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x0000003f /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x51451400 /* EMC_XM2DQSPADCTRL3 */ + 0x00514514 /* EMC_XM2DQSPADCTRL4 */ + 0x00514514 /* EMC_XM2DQSPADCTRL5 */ + 0x51451400 /* EMC_XM2DQSPADCTRL6 */ + 0x0000003f /* EMC_DSR_VTTGEN_DRV */ + 0x00000007 /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000042 /* EMC_ZCAL_WAIT_CNT */ + 0x000c000c /* EMC_MRS_WAIT_CNT2 */ + 0x00000000 /* EMC_CTT */ + 0x00000003 /* EMC_CTT_DURATION */ + 0x0000f2f3 /* EMC_CFG_PIPE */ + 0x800001c5 /* EMC_DYN_SELF_REF_CONTROL */ + 0x0000000a /* EMC_QPOP */ >; }; @@ -262,149 +413,149 @@ nvidia,emc-zcal-interval = <0x00000000>; nvidia,emc-configuration = < - 0x00000000 - 0x00000005 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000004 - 0x0000000a - 0x00000003 - 0x0000000b - 0x00000000 - 0x00000000 - 0x00000003 - 0x00000003 - 0x00000000 - 0x00000006 - 0x00000006 - 0x00000006 - 0x00000002 - 0x00000000 - 0x00000005 - 0x00000005 - 0x00010000 - 0x00000003 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000004 - 0x0000000c - 0x0000000d - 0x0000000f - 0x0000009a - 0x00000000 - 0x00000026 - 0x00000002 - 0x00000002 - 0x00000001 - 0x00000000 - 0x00000007 - 0x0000000f - 0x00000006 - 0x00000006 - 0x00000004 - 0x00000005 - 0x00000004 - 0x00000000 - 0x00000000 - 0x00000005 - 0x00000005 - 0x000000a0 - 0x00000000 - 0x00000000 - 0x00000000 - 0x106aa298 - 0x002c00a0 - 0x00008000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00004000 - 0x00000000 - 0x00000000 - 0x00004000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x000fc000 - 0x000fc000 - 0x000fc000 - 0x000fc000 - 0x0000fc00 - 0x0000fc00 - 0x0000fc00 - 0x0000fc00 - 0x10000280 - 0x00000000 - 0x00111111 - 0x00000000 - 0x00000000 - 0x77ffc081 - 0x00000303 - 0x81f1f108 - 0x07070004 - 0x0000003f - 0x016eeeee - 0x51451400 - 0x00514514 - 0x00514514 - 0x51451400 - 0x0000003f - 0x0000000b - 0x00000000 - 0x00000042 - 0x000c000c - 0x00000000 - 0x00000003 - 0x0000f2f3 - 0x8000023a - 0x0000000a + 0x00000000 /* EMC_RC */ + 0x00000005 /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x00000000 /* EMC_RAS */ + 0x00000000 /* EMC_RP */ + 0x00000004 /* EMC_R2W */ + 0x0000000a /* EMC_W2R */ + 0x00000003 /* EMC_R2P */ + 0x0000000b /* EMC_W2P */ + 0x00000000 /* EMC_RD_RCD */ + 0x00000000 /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000003 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000006 /* EMC_WDV */ + 0x00000006 /* EMC_WDV_MASK */ + 0x00000006 /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000005 /* EMC_EINPUT */ + 0x00000005 /* EMC_EINPUT_DURATION */ + 0x00010000 /* EMC_PUTERM_EXTRA */ + 0x00000003 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000004 /* EMC_QRST */ + 0x0000000c /* EMC_QSAFE */ + 0x0000000d /* EMC_RDV */ + 0x0000000f /* EMC_RDV_MASK */ + 0x0000009a /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x00000026 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x00000002 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000007 /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x00000006 /* EMC_TXSR */ + 0x00000006 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000005 /* EMC_TCKESR */ + 0x00000004 /* EMC_TPD */ + 0x00000000 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000005 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x000000a0 /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x106aa298 /* EMC_FBIO_CFG5 */ + 0x002c00a0 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x00064000 /* EMC_DLL_XFORM_DQS0 */ + 0x00064000 /* EMC_DLL_XFORM_DQS1 */ + 0x00064000 /* EMC_DLL_XFORM_DQS2 */ + 0x00064000 /* EMC_DLL_XFORM_DQS3 */ + 0x00064000 /* EMC_DLL_XFORM_DQS4 */ + 0x00064000 /* EMC_DLL_XFORM_DQS5 */ + 0x00064000 /* EMC_DLL_XFORM_DQS6 */ + 0x00064000 /* EMC_DLL_XFORM_DQS7 */ + 0x00064000 /* EMC_DLL_XFORM_DQS8 */ + 0x00064000 /* EMC_DLL_XFORM_DQS9 */ + 0x00064000 /* EMC_DLL_XFORM_DQS10 */ + 0x00064000 /* EMC_DLL_XFORM_DQS11 */ + 0x00064000 /* EMC_DLL_XFORM_DQS12 */ + 0x00064000 /* EMC_DLL_XFORM_DQS13 */ + 0x00064000 /* EMC_DLL_XFORM_DQS14 */ + 0x00064000 /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR0 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR1 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR3 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR4 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS15 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ0 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ1 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ2 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ3 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ4 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ5 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ6 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ7 */ + 0x10000280 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc081 /* EMC_XM2CLKPADCTRL */ + 0x00000303 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x0000003f /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x51451400 /* EMC_XM2DQSPADCTRL3 */ + 0x00514514 /* EMC_XM2DQSPADCTRL4 */ + 0x00514514 /* EMC_XM2DQSPADCTRL5 */ + 0x51451400 /* EMC_XM2DQSPADCTRL6 */ + 0x0000003f /* EMC_DSR_VTTGEN_DRV */ + 0x0000000b /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000042 /* EMC_ZCAL_WAIT_CNT */ + 0x000c000c /* EMC_MRS_WAIT_CNT2 */ + 0x00000000 /* EMC_CTT */ + 0x00000003 /* EMC_CTT_DURATION */ + 0x0000f2f3 /* EMC_CFG_PIPE */ + 0x8000023a /* EMC_DYN_SELF_REF_CONTROL */ + 0x0000000a /* EMC_QPOP */ >; }; @@ -430,149 +581,149 @@ nvidia,emc-zcal-interval = <0x00000000>; nvidia,emc-configuration = < - 0x00000001 - 0x0000000a - 0x00000000 - 0x00000001 - 0x00000000 - 0x00000004 - 0x0000000a - 0x00000003 - 0x0000000b - 0x00000000 - 0x00000000 - 0x00000003 - 0x00000003 - 0x00000000 - 0x00000006 - 0x00000006 - 0x00000006 - 0x00000002 - 0x00000000 - 0x00000005 - 0x00000005 - 0x00010000 - 0x00000003 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000004 - 0x0000000c - 0x0000000d - 0x0000000f - 0x00000134 - 0x00000000 - 0x0000004d - 0x00000002 - 0x00000002 - 0x00000001 - 0x00000000 - 0x00000008 - 0x0000000f - 0x0000000c - 0x0000000c - 0x00000004 - 0x00000005 - 0x00000004 - 0x00000000 - 0x00000000 - 0x00000005 - 0x00000005 - 0x0000013f - 0x00000000 - 0x00000000 - 0x00000000 - 0x106aa298 - 0x002c00a0 - 0x00008000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00004000 - 0x00000000 - 0x00000000 - 0x00004000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x000fc000 - 0x000fc000 - 0x000fc000 - 0x000fc000 - 0x0000fc00 - 0x0000fc00 - 0x0000fc00 - 0x0000fc00 - 0x10000280 - 0x00000000 - 0x00111111 - 0x00000000 - 0x00000000 - 0x77ffc081 - 0x00000303 - 0x81f1f108 - 0x07070004 - 0x0000003f - 0x016eeeee - 0x51451400 - 0x00514514 - 0x00514514 - 0x51451400 - 0x0000003f - 0x00000015 - 0x00000000 - 0x00000042 - 0x000c000c - 0x00000000 - 0x00000003 - 0x0000f2f3 - 0x80000370 - 0x0000000a + 0x00000001 /* EMC_RC */ + 0x0000000a /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x00000001 /* EMC_RAS */ + 0x00000000 /* EMC_RP */ + 0x00000004 /* EMC_R2W */ + 0x0000000a /* EMC_W2R */ + 0x00000003 /* EMC_R2P */ + 0x0000000b /* EMC_W2P */ + 0x00000000 /* EMC_RD_RCD */ + 0x00000000 /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000003 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000006 /* EMC_WDV */ + 0x00000006 /* EMC_WDV_MASK */ + 0x00000006 /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000005 /* EMC_EINPUT */ + 0x00000005 /* EMC_EINPUT_DURATION */ + 0x00010000 /* EMC_PUTERM_EXTRA */ + 0x00000003 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000004 /* EMC_QRST */ + 0x0000000c /* EMC_QSAFE */ + 0x0000000d /* EMC_RDV */ + 0x0000000f /* EMC_RDV_MASK */ + 0x00000134 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x0000004d /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x00000002 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000008 /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x0000000c /* EMC_TXSR */ + 0x0000000c /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000005 /* EMC_TCKESR */ + 0x00000004 /* EMC_TPD */ + 0x00000000 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000005 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x0000013f /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x106aa298 /* EMC_FBIO_CFG5 */ + 0x002c00a0 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x00064000 /* EMC_DLL_XFORM_DQS0 */ + 0x00064000 /* EMC_DLL_XFORM_DQS1 */ + 0x00064000 /* EMC_DLL_XFORM_DQS2 */ + 0x00064000 /* EMC_DLL_XFORM_DQS3 */ + 0x00064000 /* EMC_DLL_XFORM_DQS4 */ + 0x00064000 /* EMC_DLL_XFORM_DQS5 */ + 0x00064000 /* EMC_DLL_XFORM_DQS6 */ + 0x00064000 /* EMC_DLL_XFORM_DQS7 */ + 0x00064000 /* EMC_DLL_XFORM_DQS8 */ + 0x00064000 /* EMC_DLL_XFORM_DQS9 */ + 0x00064000 /* EMC_DLL_XFORM_DQS10 */ + 0x00064000 /* EMC_DLL_XFORM_DQS11 */ + 0x00064000 /* EMC_DLL_XFORM_DQS12 */ + 0x00064000 /* EMC_DLL_XFORM_DQS13 */ + 0x00064000 /* EMC_DLL_XFORM_DQS14 */ + 0x00064000 /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR0 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR1 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR3 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR4 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS15 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ0 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ1 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ2 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ3 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ4 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ5 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ6 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ7 */ + 0x10000280 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc081 /* EMC_XM2CLKPADCTRL */ + 0x00000303 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x0000003f /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x51451400 /* EMC_XM2DQSPADCTRL3 */ + 0x00514514 /* EMC_XM2DQSPADCTRL4 */ + 0x00514514 /* EMC_XM2DQSPADCTRL5 */ + 0x51451400 /* EMC_XM2DQSPADCTRL6 */ + 0x0000003f /* EMC_DSR_VTTGEN_DRV */ + 0x00000015 /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000042 /* EMC_ZCAL_WAIT_CNT */ + 0x000c000c /* EMC_MRS_WAIT_CNT2 */ + 0x00000000 /* EMC_CTT */ + 0x00000003 /* EMC_CTT_DURATION */ + 0x0000f2f3 /* EMC_CFG_PIPE */ + 0x80000370 /* EMC_DYN_SELF_REF_CONTROL */ + 0x0000000a /* EMC_QPOP */ >; }; @@ -598,149 +749,149 @@ nvidia,emc-zcal-interval = <0x00000000>; nvidia,emc-configuration = < - 0x00000003 - 0x00000011 - 0x00000000 - 0x00000002 - 0x00000000 - 0x00000004 - 0x0000000a - 0x00000003 - 0x0000000b - 0x00000000 - 0x00000000 - 0x00000003 - 0x00000003 - 0x00000000 - 0x00000006 - 0x00000006 - 0x00000006 - 0x00000002 - 0x00000000 - 0x00000005 - 0x00000005 - 0x00010000 - 0x00000003 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000004 - 0x0000000c - 0x0000000d - 0x0000000f - 0x00000202 - 0x00000000 - 0x00000080 - 0x00000002 - 0x00000002 - 0x00000001 - 0x00000000 - 0x0000000f - 0x0000000f - 0x00000013 - 0x00000013 - 0x00000004 - 0x00000005 - 0x00000004 - 0x00000001 - 0x00000000 - 0x00000005 - 0x00000005 - 0x00000213 - 0x00000000 - 0x00000000 - 0x00000000 - 0x106aa298 - 0x002c00a0 - 0x00008000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00004000 - 0x00000000 - 0x00000000 - 0x00004000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x000fc000 - 0x000fc000 - 0x000fc000 - 0x000fc000 - 0x0000fc00 - 0x0000fc00 - 0x0000fc00 - 0x0000fc00 - 0x10000280 - 0x00000000 - 0x00111111 - 0x00000000 - 0x00000000 - 0x77ffc081 - 0x00000303 - 0x81f1f108 - 0x07070004 - 0x0000003f - 0x016eeeee - 0x51451400 - 0x00514514 - 0x00514514 - 0x51451400 - 0x0000003f - 0x00000022 - 0x00000000 - 0x00000042 - 0x000c000c - 0x00000000 - 0x00000003 - 0x0000f2f3 - 0x8000050e - 0x0000000a + 0x00000003 /* EMC_RC */ + 0x00000011 /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x00000002 /* EMC_RAS */ + 0x00000000 /* EMC_RP */ + 0x00000004 /* EMC_R2W */ + 0x0000000a /* EMC_W2R */ + 0x00000003 /* EMC_R2P */ + 0x0000000b /* EMC_W2P */ + 0x00000000 /* EMC_RD_RCD */ + 0x00000000 /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000003 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000006 /* EMC_WDV */ + 0x00000006 /* EMC_WDV_MASK */ + 0x00000006 /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000005 /* EMC_EINPUT */ + 0x00000005 /* EMC_EINPUT_DURATION */ + 0x00010000 /* EMC_PUTERM_EXTRA */ + 0x00000003 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000004 /* EMC_QRST */ + 0x0000000c /* EMC_QSAFE */ + 0x0000000d /* EMC_RDV */ + 0x0000000f /* EMC_RDV_MASK */ + 0x00000202 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x00000080 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x00000002 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x0000000f /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x00000013 /* EMC_TXSR */ + 0x00000013 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000005 /* EMC_TCKESR */ + 0x00000004 /* EMC_TPD */ + 0x00000001 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000005 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x00000213 /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x106aa298 /* EMC_FBIO_CFG5 */ + 0x002c00a0 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x00064000 /* EMC_DLL_XFORM_DQS0 */ + 0x00064000 /* EMC_DLL_XFORM_DQS1 */ + 0x00064000 /* EMC_DLL_XFORM_DQS2 */ + 0x00064000 /* EMC_DLL_XFORM_DQS3 */ + 0x00064000 /* EMC_DLL_XFORM_DQS4 */ + 0x00064000 /* EMC_DLL_XFORM_DQS5 */ + 0x00064000 /* EMC_DLL_XFORM_DQS6 */ + 0x00064000 /* EMC_DLL_XFORM_DQS7 */ + 0x00064000 /* EMC_DLL_XFORM_DQS8 */ + 0x00064000 /* EMC_DLL_XFORM_DQS9 */ + 0x00064000 /* EMC_DLL_XFORM_DQS10 */ + 0x00064000 /* EMC_DLL_XFORM_DQS11 */ + 0x00064000 /* EMC_DLL_XFORM_DQS12 */ + 0x00064000 /* EMC_DLL_XFORM_DQS13 */ + 0x00064000 /* EMC_DLL_XFORM_DQS14 */ + 0x00064000 /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR0 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR1 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR3 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR4 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS15 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ0 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ1 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ2 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ3 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ4 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ5 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ6 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ7 */ + 0x10000280 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc081 /* EMC_XM2CLKPADCTRL */ + 0x00000303 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x0000003f /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x51451400 /* EMC_XM2DQSPADCTRL3 */ + 0x00514514 /* EMC_XM2DQSPADCTRL4 */ + 0x00514514 /* EMC_XM2DQSPADCTRL5 */ + 0x51451400 /* EMC_XM2DQSPADCTRL6 */ + 0x0000003f /* EMC_DSR_VTTGEN_DRV */ + 0x00000022 /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000042 /* EMC_ZCAL_WAIT_CNT */ + 0x000c000c /* EMC_MRS_WAIT_CNT2 */ + 0x00000000 /* EMC_CTT */ + 0x00000003 /* EMC_CTT_DURATION */ + 0x0000f2f3 /* EMC_CFG_PIPE */ + 0x8000050e /* EMC_DYN_SELF_REF_CONTROL */ + 0x0000000a /* EMC_QPOP */ >; }; @@ -766,149 +917,149 @@ nvidia,emc-zcal-interval = <0x00000000>; nvidia,emc-configuration = < - 0x00000004 - 0x0000001a - 0x00000000 - 0x00000003 - 0x00000001 - 0x00000004 - 0x0000000a - 0x00000003 - 0x0000000b - 0x00000001 - 0x00000001 - 0x00000003 - 0x00000003 - 0x00000000 - 0x00000006 - 0x00000006 - 0x00000006 - 0x00000002 - 0x00000000 - 0x00000005 - 0x00000005 - 0x00010000 - 0x00000003 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000004 - 0x0000000c - 0x0000000d - 0x0000000f - 0x00000304 - 0x00000000 - 0x000000c1 - 0x00000002 - 0x00000002 - 0x00000001 - 0x00000000 - 0x00000018 - 0x0000000f - 0x0000001c - 0x0000001c - 0x00000004 - 0x00000005 - 0x00000004 - 0x00000003 - 0x00000000 - 0x00000005 - 0x00000005 - 0x0000031c - 0x00000000 - 0x00000000 - 0x00000000 - 0x106aa298 - 0x002c00a0 - 0x00008000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00004000 - 0x00000000 - 0x00000000 - 0x00004000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x000fc000 - 0x000fc000 - 0x000fc000 - 0x000fc000 - 0x0000fc00 - 0x0000fc00 - 0x0000fc00 - 0x0000fc00 - 0x10000280 - 0x00000000 - 0x00111111 - 0x00000000 - 0x00000000 - 0x77ffc081 - 0x00000303 - 0x81f1f108 - 0x07070004 - 0x0000003f - 0x016eeeee - 0x51451400 - 0x00514514 - 0x00514514 - 0x51451400 - 0x0000003f - 0x00000033 - 0x00000000 - 0x00000042 - 0x000c000c - 0x00000000 - 0x00000003 - 0x0000f2f3 - 0x80000713 - 0x0000000a + 0x00000004 /* EMC_RC */ + 0x0000001a /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x00000003 /* EMC_RAS */ + 0x00000001 /* EMC_RP */ + 0x00000004 /* EMC_R2W */ + 0x0000000a /* EMC_W2R */ + 0x00000003 /* EMC_R2P */ + 0x0000000b /* EMC_W2P */ + 0x00000001 /* EMC_RD_RCD */ + 0x00000001 /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000003 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000006 /* EMC_WDV */ + 0x00000006 /* EMC_WDV_MASK */ + 0x00000006 /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000005 /* EMC_EINPUT */ + 0x00000005 /* EMC_EINPUT_DURATION */ + 0x00010000 /* EMC_PUTERM_EXTRA */ + 0x00000003 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000004 /* EMC_QRST */ + 0x0000000c /* EMC_QSAFE */ + 0x0000000d /* EMC_RDV */ + 0x0000000f /* EMC_RDV_MASK */ + 0x00000304 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x000000c1 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x00000002 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000018 /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x0000001c /* EMC_TXSR */ + 0x0000001c /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000005 /* EMC_TCKESR */ + 0x00000004 /* EMC_TPD */ + 0x00000003 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000005 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x0000031c /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x106aa298 /* EMC_FBIO_CFG5 */ + 0x002c00a0 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x00064000 /* EMC_DLL_XFORM_DQS0 */ + 0x00064000 /* EMC_DLL_XFORM_DQS1 */ + 0x00064000 /* EMC_DLL_XFORM_DQS2 */ + 0x00064000 /* EMC_DLL_XFORM_DQS3 */ + 0x00064000 /* EMC_DLL_XFORM_DQS4 */ + 0x00064000 /* EMC_DLL_XFORM_DQS5 */ + 0x00064000 /* EMC_DLL_XFORM_DQS6 */ + 0x00064000 /* EMC_DLL_XFORM_DQS7 */ + 0x00064000 /* EMC_DLL_XFORM_DQS8 */ + 0x00064000 /* EMC_DLL_XFORM_DQS9 */ + 0x00064000 /* EMC_DLL_XFORM_DQS10 */ + 0x00064000 /* EMC_DLL_XFORM_DQS11 */ + 0x00064000 /* EMC_DLL_XFORM_DQS12 */ + 0x00064000 /* EMC_DLL_XFORM_DQS13 */ + 0x00064000 /* EMC_DLL_XFORM_DQS14 */ + 0x00064000 /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR0 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR1 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR3 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR4 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS15 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ0 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ1 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ2 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ3 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ4 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ5 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ6 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ7 */ + 0x10000280 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc081 /* EMC_XM2CLKPADCTRL */ + 0x00000303 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x0000003f /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x51451400 /* EMC_XM2DQSPADCTRL3 */ + 0x00514514 /* EMC_XM2DQSPADCTRL4 */ + 0x00514514 /* EMC_XM2DQSPADCTRL5 */ + 0x51451400 /* EMC_XM2DQSPADCTRL6 */ + 0x0000003f /* EMC_DSR_VTTGEN_DRV */ + 0x00000033 /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000042 /* EMC_ZCAL_WAIT_CNT */ + 0x000c000c /* EMC_MRS_WAIT_CNT2 */ + 0x00000000 /* EMC_CTT */ + 0x00000003 /* EMC_CTT_DURATION */ + 0x0000f2f3 /* EMC_CFG_PIPE */ + 0x80000713 /* EMC_DYN_SELF_REF_CONTROL */ + 0x0000000a /* EMC_QPOP */ >; }; @@ -934,149 +1085,149 @@ nvidia,emc-zcal-interval = <0x00020000>; nvidia,emc-configuration = < - 0x00000009 - 0x00000035 - 0x00000000 - 0x00000007 - 0x00000002 - 0x00000005 - 0x0000000a - 0x00000003 - 0x0000000b - 0x00000002 - 0x00000002 - 0x00000003 - 0x00000003 - 0x00000000 - 0x00000005 - 0x00000005 - 0x00000006 - 0x00000002 - 0x00000000 - 0x00000004 - 0x00000006 - 0x00010000 - 0x00000003 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000003 - 0x0000000d - 0x0000000f - 0x00000011 - 0x00000607 - 0x00000000 - 0x00000181 - 0x00000002 - 0x00000002 - 0x00000001 - 0x00000000 - 0x00000032 - 0x0000000f - 0x00000038 - 0x00000038 - 0x00000004 - 0x00000005 - 0x00000004 - 0x00000007 - 0x00000000 - 0x00000005 - 0x00000005 - 0x00000638 - 0x00000000 - 0x00000000 - 0x00000000 - 0x106aa298 - 0x002c00a0 - 0x00008000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00064000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00004000 - 0x00000000 - 0x00000000 - 0x00004000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00090000 - 0x00090000 - 0x00094000 - 0x00094000 - 0x00009400 - 0x00009000 - 0x00009000 - 0x00009000 - 0x10000280 - 0x00000000 - 0x00111111 - 0x00000000 - 0x00000000 - 0x77ffc081 - 0x00000303 - 0x81f1f108 - 0x07070004 - 0x0000003f - 0x016eeeee - 0x51451400 - 0x00514514 - 0x00514514 - 0x51451400 - 0x0000003f - 0x00000066 - 0x00000000 - 0x00000100 - 0x000c000c - 0x00000000 - 0x00000003 - 0x0000d2b3 - 0x80000d22 - 0x0000000a + 0x00000009 /* EMC_RC */ + 0x00000035 /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x00000007 /* EMC_RAS */ + 0x00000002 /* EMC_RP */ + 0x00000005 /* EMC_R2W */ + 0x0000000a /* EMC_W2R */ + 0x00000003 /* EMC_R2P */ + 0x0000000b /* EMC_W2P */ + 0x00000002 /* EMC_RD_RCD */ + 0x00000002 /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000003 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000005 /* EMC_WDV */ + 0x00000005 /* EMC_WDV_MASK */ + 0x00000006 /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000004 /* EMC_EINPUT */ + 0x00000006 /* EMC_EINPUT_DURATION */ + 0x00010000 /* EMC_PUTERM_EXTRA */ + 0x00000003 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000003 /* EMC_QRST */ + 0x0000000d /* EMC_QSAFE */ + 0x0000000f /* EMC_RDV */ + 0x00000011 /* EMC_RDV_MASK */ + 0x00000607 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x00000181 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x00000002 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000032 /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x00000038 /* EMC_TXSR */ + 0x00000038 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000005 /* EMC_TCKESR */ + 0x00000004 /* EMC_TPD */ + 0x00000007 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000005 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x00000638 /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x106aa298 /* EMC_FBIO_CFG5 */ + 0x002c00a0 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x00064000 /* EMC_DLL_XFORM_DQS0 */ + 0x00064000 /* EMC_DLL_XFORM_DQS1 */ + 0x00064000 /* EMC_DLL_XFORM_DQS2 */ + 0x00064000 /* EMC_DLL_XFORM_DQS3 */ + 0x00064000 /* EMC_DLL_XFORM_DQS4 */ + 0x00064000 /* EMC_DLL_XFORM_DQS5 */ + 0x00064000 /* EMC_DLL_XFORM_DQS6 */ + 0x00064000 /* EMC_DLL_XFORM_DQS7 */ + 0x00064000 /* EMC_DLL_XFORM_DQS8 */ + 0x00064000 /* EMC_DLL_XFORM_DQS9 */ + 0x00064000 /* EMC_DLL_XFORM_DQS10 */ + 0x00064000 /* EMC_DLL_XFORM_DQS11 */ + 0x00064000 /* EMC_DLL_XFORM_DQS12 */ + 0x00064000 /* EMC_DLL_XFORM_DQS13 */ + 0x00064000 /* EMC_DLL_XFORM_DQS14 */ + 0x00064000 /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR0 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR1 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR3 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR4 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS15 */ + 0x00090000 /* EMC_DLL_XFORM_DQ0 */ + 0x00090000 /* EMC_DLL_XFORM_DQ1 */ + 0x00094000 /* EMC_DLL_XFORM_DQ2 */ + 0x00094000 /* EMC_DLL_XFORM_DQ3 */ + 0x00009400 /* EMC_DLL_XFORM_DQ4 */ + 0x00009000 /* EMC_DLL_XFORM_DQ5 */ + 0x00009000 /* EMC_DLL_XFORM_DQ6 */ + 0x00009000 /* EMC_DLL_XFORM_DQ7 */ + 0x10000280 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc081 /* EMC_XM2CLKPADCTRL */ + 0x00000303 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x0000003f /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x51451400 /* EMC_XM2DQSPADCTRL3 */ + 0x00514514 /* EMC_XM2DQSPADCTRL4 */ + 0x00514514 /* EMC_XM2DQSPADCTRL5 */ + 0x51451400 /* EMC_XM2DQSPADCTRL6 */ + 0x0000003f /* EMC_DSR_VTTGEN_DRV */ + 0x00000066 /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000100 /* EMC_ZCAL_WAIT_CNT */ + 0x000c000c /* EMC_MRS_WAIT_CNT2 */ + 0x00000000 /* EMC_CTT */ + 0x00000003 /* EMC_CTT_DURATION */ + 0x0000d2b3 /* EMC_CFG_PIPE */ + 0x80000d22 /* EMC_DYN_SELF_REF_CONTROL */ + 0x0000000a /* EMC_QPOP */ >; }; @@ -1102,149 +1253,149 @@ nvidia,emc-zcal-interval = <0x00020000>; nvidia,emc-configuration = < - 0x0000000d - 0x0000004c - 0x00000000 - 0x00000009 - 0x00000003 - 0x00000004 - 0x00000008 - 0x00000002 - 0x00000009 - 0x00000003 - 0x00000003 - 0x00000002 - 0x00000002 - 0x00000000 - 0x00000003 - 0x00000003 - 0x00000005 - 0x00000002 - 0x00000000 - 0x00000002 - 0x00000007 - 0x00020000 - 0x00000003 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000001 - 0x0000000e - 0x00000010 - 0x00000012 - 0x000008e4 - 0x00000000 - 0x00000239 - 0x00000001 - 0x00000008 - 0x00000001 - 0x00000000 - 0x0000004a - 0x0000000e - 0x00000051 - 0x00000200 - 0x00000004 - 0x00000005 - 0x00000004 - 0x00000009 - 0x00000000 - 0x00000005 - 0x00000005 - 0x00000924 - 0x00000000 - 0x00000000 - 0x00000000 - 0x104ab098 - 0x002c00a0 - 0x00008000 - 0x00030000 - 0x00030000 - 0x00030000 - 0x00030000 - 0x00030000 - 0x00030000 - 0x00030000 - 0x00030000 - 0x00030000 - 0x00030000 - 0x00030000 - 0x00030000 - 0x00030000 - 0x00030000 - 0x00030000 - 0x00030000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00098000 - 0x00098000 - 0x00000000 - 0x00098000 - 0x00098000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00060000 - 0x00060000 - 0x00060000 - 0x00060000 - 0x00006000 - 0x00006000 - 0x00006000 - 0x00006000 - 0x10000280 - 0x00000000 - 0x00111111 - 0x00000000 - 0x00000000 - 0x77ffc081 - 0x00000101 - 0x81f1f108 - 0x07070004 - 0x00000000 - 0x016eeeee - 0x51451420 - 0x00514514 - 0x00514514 - 0x51451400 - 0x0000003f - 0x00000096 - 0x00000000 - 0x00000100 - 0x0174000c - 0x00000000 - 0x00000003 - 0x000052a3 - 0x800012d7 - 0x00000009 + 0x0000000d /* EMC_RC */ + 0x0000004c /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x00000009 /* EMC_RAS */ + 0x00000003 /* EMC_RP */ + 0x00000004 /* EMC_R2W */ + 0x00000008 /* EMC_W2R */ + 0x00000002 /* EMC_R2P */ + 0x00000009 /* EMC_W2P */ + 0x00000003 /* EMC_RD_RCD */ + 0x00000003 /* EMC_WR_RCD */ + 0x00000002 /* EMC_RRD */ + 0x00000002 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000003 /* EMC_WDV */ + 0x00000003 /* EMC_WDV_MASK */ + 0x00000005 /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000002 /* EMC_EINPUT */ + 0x00000007 /* EMC_EINPUT_DURATION */ + 0x00020000 /* EMC_PUTERM_EXTRA */ + 0x00000003 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000001 /* EMC_QRST */ + 0x0000000e /* EMC_QSAFE */ + 0x00000010 /* EMC_RDV */ + 0x00000012 /* EMC_RDV_MASK */ + 0x000008e4 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x00000239 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000001 /* EMC_PDEX2WR */ + 0x00000008 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x0000004a /* EMC_AR2PDEN */ + 0x0000000e /* EMC_RW2PDEN */ + 0x00000051 /* EMC_TXSR */ + 0x00000200 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000005 /* EMC_TCKESR */ + 0x00000004 /* EMC_TPD */ + 0x00000009 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000005 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x00000924 /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x104ab098 /* EMC_FBIO_CFG5 */ + 0x002c00a0 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x00030000 /* EMC_DLL_XFORM_DQS0 */ + 0x00030000 /* EMC_DLL_XFORM_DQS1 */ + 0x00030000 /* EMC_DLL_XFORM_DQS2 */ + 0x00030000 /* EMC_DLL_XFORM_DQS3 */ + 0x00030000 /* EMC_DLL_XFORM_DQS4 */ + 0x00030000 /* EMC_DLL_XFORM_DQS5 */ + 0x00030000 /* EMC_DLL_XFORM_DQS6 */ + 0x00030000 /* EMC_DLL_XFORM_DQS7 */ + 0x00030000 /* EMC_DLL_XFORM_DQS8 */ + 0x00030000 /* EMC_DLL_XFORM_DQS9 */ + 0x00030000 /* EMC_DLL_XFORM_DQS10 */ + 0x00030000 /* EMC_DLL_XFORM_DQS11 */ + 0x00030000 /* EMC_DLL_XFORM_DQS12 */ + 0x00030000 /* EMC_DLL_XFORM_DQS13 */ + 0x00030000 /* EMC_DLL_XFORM_DQS14 */ + 0x00030000 /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00098000 /* EMC_DLL_XFORM_ADDR0 */ + 0x00098000 /* EMC_DLL_XFORM_ADDR1 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00098000 /* EMC_DLL_XFORM_ADDR3 */ + 0x00098000 /* EMC_DLL_XFORM_ADDR4 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS15 */ + 0x00060000 /* EMC_DLL_XFORM_DQ0 */ + 0x00060000 /* EMC_DLL_XFORM_DQ1 */ + 0x00060000 /* EMC_DLL_XFORM_DQ2 */ + 0x00060000 /* EMC_DLL_XFORM_DQ3 */ + 0x00006000 /* EMC_DLL_XFORM_DQ4 */ + 0x00006000 /* EMC_DLL_XFORM_DQ5 */ + 0x00006000 /* EMC_DLL_XFORM_DQ6 */ + 0x00006000 /* EMC_DLL_XFORM_DQ7 */ + 0x10000280 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc081 /* EMC_XM2CLKPADCTRL */ + 0x00000101 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x00000000 /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x51451420 /* EMC_XM2DQSPADCTRL3 */ + 0x00514514 /* EMC_XM2DQSPADCTRL4 */ + 0x00514514 /* EMC_XM2DQSPADCTRL5 */ + 0x51451400 /* EMC_XM2DQSPADCTRL6 */ + 0x0000003f /* EMC_DSR_VTTGEN_DRV */ + 0x00000096 /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000100 /* EMC_ZCAL_WAIT_CNT */ + 0x0174000c /* EMC_MRS_WAIT_CNT2 */ + 0x00000000 /* EMC_CTT */ + 0x00000003 /* EMC_CTT_DURATION */ + 0x000052a3 /* EMC_CFG_PIPE */ + 0x800012d7 /* EMC_DYN_SELF_REF_CONTROL */ + 0x00000009 /* EMC_QPOP */ >; }; @@ -1270,149 +1421,317 @@ nvidia,emc-zcal-interval = <0x00020000>; nvidia,emc-configuration = < - 0x00000012 - 0x00000065 - 0x00000000 - 0x0000000c - 0x00000004 - 0x00000005 - 0x00000008 - 0x00000002 - 0x0000000a - 0x00000004 - 0x00000004 - 0x00000002 - 0x00000002 - 0x00000000 - 0x00000003 - 0x00000003 - 0x00000005 - 0x00000002 - 0x00000000 - 0x00000001 - 0x00000008 - 0x00020000 - 0x00000003 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x0000000f - 0x00000010 - 0x00000012 - 0x00000bd1 - 0x00000000 - 0x000002f4 - 0x00000001 - 0x00000008 - 0x00000001 - 0x00000000 - 0x00000063 - 0x0000000f - 0x0000006b - 0x00000200 - 0x00000004 - 0x00000005 - 0x00000004 - 0x0000000d - 0x00000000 - 0x00000005 - 0x00000005 - 0x00000c11 - 0x00000000 - 0x00000000 - 0x00000000 - 0x104ab098 - 0x002c00a0 - 0x00008000 - 0x00030000 - 0x00030000 - 0x00030000 - 0x00030000 - 0x00030000 - 0x00030000 - 0x00030000 - 0x00030000 - 0x00030000 - 0x00030000 - 0x00030000 - 0x00030000 - 0x00030000 - 0x00030000 - 0x00030000 - 0x00030000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00070000 - 0x00070000 - 0x00000000 - 0x00070000 - 0x00070000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00048000 - 0x00048000 - 0x00048000 - 0x00048000 - 0x00004800 - 0x00004800 - 0x00004800 - 0x00004800 - 0x10000280 - 0x00000000 - 0x00111111 - 0x00000000 - 0x00000000 - 0x77ffc081 - 0x00000101 - 0x81f1f108 - 0x07070004 - 0x00000000 - 0x016eeeee - 0x51451420 - 0x00514514 - 0x00514514 - 0x51451400 - 0x0000003f - 0x000000c6 - 0x00000000 - 0x00000100 - 0x015b000c - 0x00000000 - 0x00000003 - 0x000052a3 - 0x8000188b - 0x00000009 + 0x00000012 /* EMC_RC */ + 0x00000065 /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x0000000c /* EMC_RAS */ + 0x00000004 /* EMC_RP */ + 0x00000005 /* EMC_R2W */ + 0x00000008 /* EMC_W2R */ + 0x00000002 /* EMC_R2P */ + 0x0000000a /* EMC_W2P */ + 0x00000004 /* EMC_RD_RCD */ + 0x00000004 /* EMC_WR_RCD */ + 0x00000002 /* EMC_RRD */ + 0x00000002 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000003 /* EMC_WDV */ + 0x00000003 /* EMC_WDV_MASK */ + 0x00000005 /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000001 /* EMC_EINPUT */ + 0x00000008 /* EMC_EINPUT_DURATION */ + 0x00020000 /* EMC_PUTERM_EXTRA */ + 0x00000003 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000000 /* EMC_QRST */ + 0x0000000f /* EMC_QSAFE */ + 0x00000010 /* EMC_RDV */ + 0x00000012 /* EMC_RDV_MASK */ + 0x00000bd1 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x000002f4 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000001 /* EMC_PDEX2WR */ + 0x00000008 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000063 /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x0000006b /* EMC_TXSR */ + 0x00000200 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000005 /* EMC_TCKESR */ + 0x00000004 /* EMC_TPD */ + 0x0000000d /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000005 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x00000c11 /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x104ab098 /* EMC_FBIO_CFG5 */ + 0x002c00a0 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x00030000 /* EMC_DLL_XFORM_DQS0 */ + 0x00030000 /* EMC_DLL_XFORM_DQS1 */ + 0x00030000 /* EMC_DLL_XFORM_DQS2 */ + 0x00030000 /* EMC_DLL_XFORM_DQS3 */ + 0x00030000 /* EMC_DLL_XFORM_DQS4 */ + 0x00030000 /* EMC_DLL_XFORM_DQS5 */ + 0x00030000 /* EMC_DLL_XFORM_DQS6 */ + 0x00030000 /* EMC_DLL_XFORM_DQS7 */ + 0x00030000 /* EMC_DLL_XFORM_DQS8 */ + 0x00030000 /* EMC_DLL_XFORM_DQS9 */ + 0x00030000 /* EMC_DLL_XFORM_DQS10 */ + 0x00030000 /* EMC_DLL_XFORM_DQS11 */ + 0x00030000 /* EMC_DLL_XFORM_DQS12 */ + 0x00030000 /* EMC_DLL_XFORM_DQS13 */ + 0x00030000 /* EMC_DLL_XFORM_DQS14 */ + 0x00030000 /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00070000 /* EMC_DLL_XFORM_ADDR0 */ + 0x00070000 /* EMC_DLL_XFORM_ADDR1 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00070000 /* EMC_DLL_XFORM_ADDR3 */ + 0x00070000 /* EMC_DLL_XFORM_ADDR4 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS15 */ + 0x00048000 /* EMC_DLL_XFORM_DQ0 */ + 0x00048000 /* EMC_DLL_XFORM_DQ1 */ + 0x00048000 /* EMC_DLL_XFORM_DQ2 */ + 0x00048000 /* EMC_DLL_XFORM_DQ3 */ + 0x00004800 /* EMC_DLL_XFORM_DQ4 */ + 0x00004800 /* EMC_DLL_XFORM_DQ5 */ + 0x00004800 /* EMC_DLL_XFORM_DQ6 */ + 0x00004800 /* EMC_DLL_XFORM_DQ7 */ + 0x10000280 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc081 /* EMC_XM2CLKPADCTRL */ + 0x00000101 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x00000000 /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x51451420 /* EMC_XM2DQSPADCTRL3 */ + 0x00514514 /* EMC_XM2DQSPADCTRL4 */ + 0x00514514 /* EMC_XM2DQSPADCTRL5 */ + 0x51451400 /* EMC_XM2DQSPADCTRL6 */ + 0x0000003f /* EMC_DSR_VTTGEN_DRV */ + 0x000000c6 /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000100 /* EMC_ZCAL_WAIT_CNT */ + 0x015b000c /* EMC_MRS_WAIT_CNT2 */ + 0x00000000 /* EMC_CTT */ + 0x00000003 /* EMC_CTT_DURATION */ + 0x000052a3 /* EMC_CFG_PIPE */ + 0x8000188b /* EMC_DYN_SELF_REF_CONTROL */ + 0x00000009 /* EMC_QPOP */ + >; + }; + + timing-528000000 { + clock-frequency = <528000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000000>; + nvidia,emc-cfg = <0x73300000>; + nvidia,emc-cfg-2 = <0x0000089d>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100002>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80000941>; + nvidia,emc-mrs-wait-cnt = <0x013a000c>; + nvidia,emc-sel-dpd-ctrl = <0x00040008>; + nvidia,emc-xm2dqspadctrl2 = <0x0123133d>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00020000>; + + nvidia,emc-configuration = < + 0x00000018 /* EMC_RC */ + 0x00000088 /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x00000011 /* EMC_RAS */ + 0x00000006 /* EMC_RP */ + 0x00000006 /* EMC_R2W */ + 0x00000009 /* EMC_W2R */ + 0x00000002 /* EMC_R2P */ + 0x0000000d /* EMC_W2P */ + 0x00000006 /* EMC_RD_RCD */ + 0x00000006 /* EMC_WR_RCD */ + 0x00000002 /* EMC_RRD */ + 0x00000002 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000003 /* EMC_WDV */ + 0x00000003 /* EMC_WDV_MASK */ + 0x00000007 /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000002 /* EMC_EINPUT */ + 0x00000009 /* EMC_EINPUT_DURATION */ + 0x00040000 /* EMC_PUTERM_EXTRA */ + 0x00000003 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000001 /* EMC_QRST */ + 0x00000010 /* EMC_QSAFE */ + 0x00000013 /* EMC_RDV */ + 0x00000015 /* EMC_RDV_MASK */ + 0x00000fd6 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x000003f5 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x0000000b /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000084 /* EMC_AR2PDEN */ + 0x00000012 /* EMC_RW2PDEN */ + 0x0000008f /* EMC_TXSR */ + 0x00000200 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000005 /* EMC_TCKESR */ + 0x00000004 /* EMC_TPD */ + 0x00000013 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000006 /* EMC_TCLKSTABLE */ + 0x00000006 /* EMC_TCLKSTOP */ + 0x00001017 /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x104ab098 /* EMC_FBIO_CFG5 */ + 0xe01200b1 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x0000000a /* EMC_DLL_XFORM_DQS0 */ + 0x0000000a /* EMC_DLL_XFORM_DQS1 */ + 0x0000000a /* EMC_DLL_XFORM_DQS2 */ + 0x0000000a /* EMC_DLL_XFORM_DQS3 */ + 0x0000000a /* EMC_DLL_XFORM_DQS4 */ + 0x0000000a /* EMC_DLL_XFORM_DQS5 */ + 0x0000000a /* EMC_DLL_XFORM_DQS6 */ + 0x0000000a /* EMC_DLL_XFORM_DQS7 */ + 0x0000000a /* EMC_DLL_XFORM_DQS8 */ + 0x0000000a /* EMC_DLL_XFORM_DQS9 */ + 0x0000000a /* EMC_DLL_XFORM_DQS10 */ + 0x0000000a /* EMC_DLL_XFORM_DQS11 */ + 0x0000000a /* EMC_DLL_XFORM_DQS12 */ + 0x0000000a /* EMC_DLL_XFORM_DQS13 */ + 0x0000000a /* EMC_DLL_XFORM_DQS14 */ + 0x0000000a /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00050000 /* EMC_DLL_XFORM_ADDR0 */ + 0x00050000 /* EMC_DLL_XFORM_ADDR1 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00050000 /* EMC_DLL_XFORM_ADDR3 */ + 0x00050000 /* EMC_DLL_XFORM_ADDR4 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000002 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000002 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000003 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000004 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000001 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000004 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000003 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000002 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000002 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000003 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000004 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000001 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000004 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000003 /* EMC_DLI_TRIM_TXDQS15 */ + 0x0000000e /* EMC_DLL_XFORM_DQ0 */ + 0x0000000e /* EMC_DLL_XFORM_DQ1 */ + 0x0000000e /* EMC_DLL_XFORM_DQ2 */ + 0x0000000e /* EMC_DLL_XFORM_DQ3 */ + 0x0000000e /* EMC_DLL_XFORM_DQ4 */ + 0x0000000e /* EMC_DLL_XFORM_DQ5 */ + 0x0000000e /* EMC_DLL_XFORM_DQ6 */ + 0x0000000e /* EMC_DLL_XFORM_DQ7 */ + 0x100002a0 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc085 /* EMC_XM2CLKPADCTRL */ + 0x00000101 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x00000000 /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x51451420 /* EMC_XM2DQSPADCTRL3 */ + 0x00514514 /* EMC_XM2DQSPADCTRL4 */ + 0x00514514 /* EMC_XM2DQSPADCTRL5 */ + 0x51451400 /* EMC_XM2DQSPADCTRL6 */ + 0x0606003f /* EMC_DSR_VTTGEN_DRV */ + 0x00000000 /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000100 /* EMC_ZCAL_WAIT_CNT */ + 0x013a000c /* EMC_MRS_WAIT_CNT2 */ + 0x00000000 /* EMC_CTT */ + 0x00000003 /* EMC_CTT_DURATION */ + 0x000042a0 /* EMC_CFG_PIPE */ + 0x80002062 /* EMC_DYN_SELF_REF_CONTROL */ + 0x0000000b /* EMC_QPOP */ >; }; @@ -1438,149 +1757,149 @@ nvidia,emc-zcal-interval = <0x00020000>; nvidia,emc-configuration = < - 0x0000001c - 0x0000009a - 0x00000000 - 0x00000013 - 0x00000007 - 0x00000007 - 0x0000000b - 0x00000003 - 0x00000010 - 0x00000007 - 0x00000007 - 0x00000002 - 0x00000002 - 0x00000000 - 0x00000005 - 0x00000005 - 0x0000000a - 0x00000002 - 0x00000000 - 0x00000003 - 0x0000000b - 0x00070000 - 0x00000003 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000002 - 0x00000012 - 0x00000016 - 0x00000018 - 0x00001208 - 0x00000000 - 0x00000482 - 0x00000002 - 0x0000000d - 0x00000001 - 0x00000000 - 0x00000096 - 0x00000015 - 0x000000a2 - 0x00000200 - 0x00000004 - 0x00000005 - 0x00000004 - 0x00000015 - 0x00000000 - 0x00000006 - 0x00000006 - 0x00001249 - 0x00000000 - 0x00000000 - 0x00000000 - 0x104ab098 - 0xe00e00b1 - 0x00008000 - 0x0000000a - 0x0000000a - 0x0000000a - 0x0000000a - 0x0000000a - 0x0000000a - 0x0000000a - 0x0000000a - 0x0000000a - 0x0000000a - 0x0000000a - 0x0000000a - 0x0000000a - 0x0000000a - 0x0000000a - 0x0000000a - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00048000 - 0x00048000 - 0x00000000 - 0x00048000 - 0x00048000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000004 - 0x00000004 - 0x00000002 - 0x00000005 - 0x00000006 - 0x00000003 - 0x00000006 - 0x00000005 - 0x00000004 - 0x00000004 - 0x00000002 - 0x00000005 - 0x00000006 - 0x00000003 - 0x00000006 - 0x00000005 - 0x0000000e - 0x0000000e - 0x0000000e - 0x0000000e - 0x0000000e - 0x0000000e - 0x0000000e - 0x0000000e - 0x100002a0 - 0x00000000 - 0x00111111 - 0x00000000 - 0x00000000 - 0x77ffc085 - 0x00000101 - 0x81f1f108 - 0x07070004 - 0x00000000 - 0x016eeeee - 0x51451420 - 0x00514514 - 0x00514514 - 0x51451400 - 0x0606003f - 0x00000000 - 0x00000000 - 0x00000100 - 0x0128000c - 0x00000000 - 0x00000003 - 0x000040a0 - 0x800024aa - 0x0000000e + 0x0000001c /* EMC_RC */ + 0x0000009a /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x00000013 /* EMC_RAS */ + 0x00000007 /* EMC_RP */ + 0x00000007 /* EMC_R2W */ + 0x0000000b /* EMC_W2R */ + 0x00000003 /* EMC_R2P */ + 0x00000010 /* EMC_W2P */ + 0x00000007 /* EMC_RD_RCD */ + 0x00000007 /* EMC_WR_RCD */ + 0x00000002 /* EMC_RRD */ + 0x00000002 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000005 /* EMC_WDV */ + 0x00000005 /* EMC_WDV_MASK */ + 0x0000000a /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000003 /* EMC_EINPUT */ + 0x0000000b /* EMC_EINPUT_DURATION */ + 0x00070000 /* EMC_PUTERM_EXTRA */ + 0x00000003 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000002 /* EMC_QRST */ + 0x00000012 /* EMC_QSAFE */ + 0x00000016 /* EMC_RDV */ + 0x00000018 /* EMC_RDV_MASK */ + 0x00001208 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x00000482 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x0000000d /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000096 /* EMC_AR2PDEN */ + 0x00000015 /* EMC_RW2PDEN */ + 0x000000a2 /* EMC_TXSR */ + 0x00000200 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000005 /* EMC_TCKESR */ + 0x00000004 /* EMC_TPD */ + 0x00000015 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000006 /* EMC_TCLKSTABLE */ + 0x00000006 /* EMC_TCLKSTOP */ + 0x00001249 /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x104ab098 /* EMC_FBIO_CFG5 */ + 0xe00e00b1 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x0000000a /* EMC_DLL_XFORM_DQS0 */ + 0x0000000a /* EMC_DLL_XFORM_DQS1 */ + 0x0000000a /* EMC_DLL_XFORM_DQS2 */ + 0x0000000a /* EMC_DLL_XFORM_DQS3 */ + 0x0000000a /* EMC_DLL_XFORM_DQS4 */ + 0x0000000a /* EMC_DLL_XFORM_DQS5 */ + 0x0000000a /* EMC_DLL_XFORM_DQS6 */ + 0x0000000a /* EMC_DLL_XFORM_DQS7 */ + 0x0000000a /* EMC_DLL_XFORM_DQS8 */ + 0x0000000a /* EMC_DLL_XFORM_DQS9 */ + 0x0000000a /* EMC_DLL_XFORM_DQS10 */ + 0x0000000a /* EMC_DLL_XFORM_DQS11 */ + 0x0000000a /* EMC_DLL_XFORM_DQS12 */ + 0x0000000a /* EMC_DLL_XFORM_DQS13 */ + 0x0000000a /* EMC_DLL_XFORM_DQS14 */ + 0x0000000a /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00048000 /* EMC_DLL_XFORM_ADDR0 */ + 0x00048000 /* EMC_DLL_XFORM_ADDR1 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00048000 /* EMC_DLL_XFORM_ADDR3 */ + 0x00048000 /* EMC_DLL_XFORM_ADDR4 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000004 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000004 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000002 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000005 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000006 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000003 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000006 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000005 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000004 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000004 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000002 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000005 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000006 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000003 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000006 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000005 /* EMC_DLI_TRIM_TXDQS15 */ + 0x0000000e /* EMC_DLL_XFORM_DQ0 */ + 0x0000000e /* EMC_DLL_XFORM_DQ1 */ + 0x0000000e /* EMC_DLL_XFORM_DQ2 */ + 0x0000000e /* EMC_DLL_XFORM_DQ3 */ + 0x0000000e /* EMC_DLL_XFORM_DQ4 */ + 0x0000000e /* EMC_DLL_XFORM_DQ5 */ + 0x0000000e /* EMC_DLL_XFORM_DQ6 */ + 0x0000000e /* EMC_DLL_XFORM_DQ7 */ + 0x100002a0 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc085 /* EMC_XM2CLKPADCTRL */ + 0x00000101 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x00000000 /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x51451420 /* EMC_XM2DQSPADCTRL3 */ + 0x00514514 /* EMC_XM2DQSPADCTRL4 */ + 0x00514514 /* EMC_XM2DQSPADCTRL5 */ + 0x51451400 /* EMC_XM2DQSPADCTRL6 */ + 0x0606003f /* EMC_DSR_VTTGEN_DRV */ + 0x00000000 /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000100 /* EMC_ZCAL_WAIT_CNT */ + 0x0128000c /* EMC_MRS_WAIT_CNT2 */ + 0x00000000 /* EMC_CTT */ + 0x00000003 /* EMC_CTT_DURATION */ + 0x000040a0 /* EMC_CFG_PIPE */ + 0x800024aa /* EMC_DYN_SELF_REF_CONTROL */ + 0x0000000e /* EMC_QPOP */ >; }; @@ -1606,152 +1925,3855 @@ nvidia,emc-zcal-interval = <0x00020000>; nvidia,emc-configuration = < - 0x00000025 - 0x000000cc - 0x00000000 - 0x0000001a - 0x00000009 - 0x00000008 - 0x0000000d - 0x00000004 - 0x00000013 - 0x00000009 - 0x00000009 - 0x00000003 - 0x00000002 - 0x00000000 - 0x00000006 - 0x00000006 - 0x0000000b - 0x00000002 - 0x00000000 - 0x00000002 - 0x0000000d - 0x00080000 - 0x00000004 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000001 - 0x00000014 - 0x00000018 - 0x0000001a - 0x000017e2 - 0x00000000 - 0x000005f8 - 0x00000003 - 0x00000011 - 0x00000001 - 0x00000000 - 0x000000c6 - 0x00000018 - 0x000000d6 - 0x00000200 - 0x00000005 - 0x00000006 - 0x00000005 - 0x0000001d - 0x00000000 - 0x00000008 - 0x00000008 - 0x00001822 - 0x00000000 - 0x80000005 - 0x00000000 - 0x104ab198 - 0xe00700b1 - 0x00008000 - 0x00000005 - 0x00000005 - 0x00000005 - 0x00000005 - 0x00000005 - 0x00000005 - 0x00000005 - 0x00000005 - 0x00000005 - 0x00000005 - 0x00000005 - 0x00000005 - 0x00000005 - 0x00000005 - 0x00000005 - 0x00000005 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00034000 - 0x00034000 - 0x00000000 - 0x00034000 - 0x00034000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000000 - 0x00000008 - 0x00000008 - 0x00000005 - 0x00000009 - 0x00000009 - 0x00000007 - 0x00000009 - 0x00000008 - 0x00000008 - 0x00000008 - 0x00000005 - 0x00000009 - 0x00000009 - 0x00000007 - 0x00000009 - 0x00000008 - 0x0000000a - 0x0000000a - 0x0000000a - 0x0000000a - 0x0000000a - 0x0000000a - 0x0000000a - 0x0000000a - 0x100002a0 - 0x00000000 - 0x00111111 - 0x00000000 - 0x00000000 - 0x77ffc085 - 0x00000101 - 0x81f1f108 - 0x07070004 - 0x00000000 - 0x016eeeee - 0x61861820 - 0x00514514 - 0x00514514 - 0x61861800 - 0x0606003f - 0x00000000 - 0x00000000 - 0x00000100 - 0x00f8000c - 0x00000007 - 0x00000004 - 0x00004080 - 0x80003012 - 0x0000000f + 0x00000025 /* EMC_RC */ + 0x000000cc /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x0000001a /* EMC_RAS */ + 0x00000009 /* EMC_RP */ + 0x00000008 /* EMC_R2W */ + 0x0000000d /* EMC_W2R */ + 0x00000004 /* EMC_R2P */ + 0x00000013 /* EMC_W2P */ + 0x00000009 /* EMC_RD_RCD */ + 0x00000009 /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000002 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000006 /* EMC_WDV */ + 0x00000006 /* EMC_WDV_MASK */ + 0x0000000b /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000002 /* EMC_EINPUT */ + 0x0000000d /* EMC_EINPUT_DURATION */ + 0x00080000 /* EMC_PUTERM_EXTRA */ + 0x00000004 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000001 /* EMC_QRST */ + 0x00000014 /* EMC_QSAFE */ + 0x00000018 /* EMC_RDV */ + 0x0000001a /* EMC_RDV_MASK */ + 0x000017e2 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x000005f8 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000003 /* EMC_PDEX2WR */ + 0x00000011 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x000000c6 /* EMC_AR2PDEN */ + 0x00000018 /* EMC_RW2PDEN */ + 0x000000d6 /* EMC_TXSR */ + 0x00000200 /* EMC_TXSRDLL */ + 0x00000005 /* EMC_TCKE */ + 0x00000006 /* EMC_TCKESR */ + 0x00000005 /* EMC_TPD */ + 0x0000001d /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000008 /* EMC_TCLKSTABLE */ + 0x00000008 /* EMC_TCLKSTOP */ + 0x00001822 /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x80000005 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x104ab198 /* EMC_FBIO_CFG5 */ + 0xe00700b1 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x00000005 /* EMC_DLL_XFORM_DQS0 */ + 0x00000005 /* EMC_DLL_XFORM_DQS1 */ + 0x00000005 /* EMC_DLL_XFORM_DQS2 */ + 0x00000005 /* EMC_DLL_XFORM_DQS3 */ + 0x00000005 /* EMC_DLL_XFORM_DQS4 */ + 0x00000005 /* EMC_DLL_XFORM_DQS5 */ + 0x00000005 /* EMC_DLL_XFORM_DQS6 */ + 0x00000005 /* EMC_DLL_XFORM_DQS7 */ + 0x00000005 /* EMC_DLL_XFORM_DQS8 */ + 0x00000005 /* EMC_DLL_XFORM_DQS9 */ + 0x00000005 /* EMC_DLL_XFORM_DQS10 */ + 0x00000005 /* EMC_DLL_XFORM_DQS11 */ + 0x00000005 /* EMC_DLL_XFORM_DQS12 */ + 0x00000005 /* EMC_DLL_XFORM_DQS13 */ + 0x00000005 /* EMC_DLL_XFORM_DQS14 */ + 0x00000005 /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00034000 /* EMC_DLL_XFORM_ADDR0 */ + 0x00034000 /* EMC_DLL_XFORM_ADDR1 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00034000 /* EMC_DLL_XFORM_ADDR3 */ + 0x00034000 /* EMC_DLL_XFORM_ADDR4 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000008 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000008 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000005 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000009 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000009 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000007 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000009 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000008 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000008 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000008 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000005 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000009 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000009 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000007 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000009 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000008 /* EMC_DLI_TRIM_TXDQS15 */ + 0x0000000a /* EMC_DLL_XFORM_DQ0 */ + 0x0000000a /* EMC_DLL_XFORM_DQ1 */ + 0x0000000a /* EMC_DLL_XFORM_DQ2 */ + 0x0000000a /* EMC_DLL_XFORM_DQ3 */ + 0x0000000a /* EMC_DLL_XFORM_DQ4 */ + 0x0000000a /* EMC_DLL_XFORM_DQ5 */ + 0x0000000a /* EMC_DLL_XFORM_DQ6 */ + 0x0000000a /* EMC_DLL_XFORM_DQ7 */ + 0x100002a0 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc085 /* EMC_XM2CLKPADCTRL */ + 0x00000101 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x00000000 /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x61861820 /* EMC_XM2DQSPADCTRL3 */ + 0x00514514 /* EMC_XM2DQSPADCTRL4 */ + 0x00514514 /* EMC_XM2DQSPADCTRL5 */ + 0x61861800 /* EMC_XM2DQSPADCTRL6 */ + 0x0606003f /* EMC_DSR_VTTGEN_DRV */ + 0x00000000 /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000100 /* EMC_ZCAL_WAIT_CNT */ + 0x00f8000c /* EMC_MRS_WAIT_CNT2 */ + 0x00000007 /* EMC_CTT */ + 0x00000004 /* EMC_CTT_DURATION */ + 0x00004080 /* EMC_CFG_PIPE */ + 0x80003012 /* EMC_DYN_SELF_REF_CONTROL */ + 0x0000000f /* EMC_QPOP */ + >; + }; + }; + + emc-timings-4 { + nvidia,ram-code = <4>; + + timing-12750000 { + clock-frequency = <12750000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000008>; + nvidia,emc-cfg = <0x73240000>; + nvidia,emc-cfg-2 = <0x000008c5>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x00100003>; + nvidia,emc-mode-2 = <0x00200008>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x00001221>; + nvidia,emc-mrs-wait-cnt = <0x000e000e>; + nvidia,emc-sel-dpd-ctrl = <0x00040128>; + nvidia,emc-xm2dqspadctrl2 = <0x0130b118>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00000000>; + + nvidia,emc-configuration = < + 0x00000000 /* EMC_RC */ + 0x00000004 /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x00000000 /* EMC_RAS */ + 0x00000000 /* EMC_RP */ + 0x00000004 /* EMC_R2W */ + 0x0000000a /* EMC_W2R */ + 0x00000005 /* EMC_R2P */ + 0x0000000b /* EMC_W2P */ + 0x00000000 /* EMC_RD_RCD */ + 0x00000000 /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000003 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000006 /* EMC_WDV */ + 0x00000006 /* EMC_WDV_MASK */ + 0x00000006 /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000005 /* EMC_EINPUT */ + 0x00000005 /* EMC_EINPUT_DURATION */ + 0x00010000 /* EMC_PUTERM_EXTRA */ + 0x00000003 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000004 /* EMC_QRST */ + 0x0000000c /* EMC_QSAFE */ + 0x0000000d /* EMC_RDV */ + 0x0000000f /* EMC_RDV_MASK */ + 0x00000060 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x00000018 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x00000002 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000007 /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x00000005 /* EMC_TXSR */ + 0x00000005 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000005 /* EMC_TCKESR */ + 0x00000004 /* EMC_TPD */ + 0x00000000 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000005 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x00000064 /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x106aa298 /* EMC_FBIO_CFG5 */ + 0x002c00a0 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x00064000 /* EMC_DLL_XFORM_DQS0 */ + 0x00064000 /* EMC_DLL_XFORM_DQS1 */ + 0x00064000 /* EMC_DLL_XFORM_DQS2 */ + 0x00064000 /* EMC_DLL_XFORM_DQS3 */ + 0x00064000 /* EMC_DLL_XFORM_DQS4 */ + 0x00064000 /* EMC_DLL_XFORM_DQS5 */ + 0x00064000 /* EMC_DLL_XFORM_DQS6 */ + 0x00064000 /* EMC_DLL_XFORM_DQS7 */ + 0x00064000 /* EMC_DLL_XFORM_DQS8 */ + 0x00064000 /* EMC_DLL_XFORM_DQS9 */ + 0x00064000 /* EMC_DLL_XFORM_DQS10 */ + 0x00064000 /* EMC_DLL_XFORM_DQS11 */ + 0x00064000 /* EMC_DLL_XFORM_DQS12 */ + 0x00064000 /* EMC_DLL_XFORM_DQS13 */ + 0x00064000 /* EMC_DLL_XFORM_DQS14 */ + 0x00064000 /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR0 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR1 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR3 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR4 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS15 */ + 0x00080000 /* EMC_DLL_XFORM_DQ0 */ + 0x00080000 /* EMC_DLL_XFORM_DQ1 */ + 0x00080000 /* EMC_DLL_XFORM_DQ2 */ + 0x00080000 /* EMC_DLL_XFORM_DQ3 */ + 0x00008000 /* EMC_DLL_XFORM_DQ4 */ + 0x00008000 /* EMC_DLL_XFORM_DQ5 */ + 0x00008000 /* EMC_DLL_XFORM_DQ6 */ + 0x00008000 /* EMC_DLL_XFORM_DQ7 */ + 0x10000280 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc081 /* EMC_XM2CLKPADCTRL */ + 0x00000303 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x0000003f /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x51451400 /* EMC_XM2DQSPADCTRL3 */ + 0x00514514 /* EMC_XM2DQSPADCTRL4 */ + 0x00514514 /* EMC_XM2DQSPADCTRL5 */ + 0x51451400 /* EMC_XM2DQSPADCTRL6 */ + 0x0000003f /* EMC_DSR_VTTGEN_DRV */ + 0x00000007 /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000042 /* EMC_ZCAL_WAIT_CNT */ + 0x000e000e /* EMC_MRS_WAIT_CNT2 */ + 0x00000000 /* EMC_CTT */ + 0x00000003 /* EMC_CTT_DURATION */ + 0x0000f2f3 /* EMC_CFG_PIPE */ + 0x800001c5 /* EMC_DYN_SELF_REF_CONTROL */ + 0x0000000a /* EMC_QPOP */ + >; + }; + + timing-20400000 { + clock-frequency = <20400000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000008>; + nvidia,emc-cfg = <0x73240000>; + nvidia,emc-cfg-2 = <0x000008c5>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x00100003>; + nvidia,emc-mode-2 = <0x00200008>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x00001221>; + nvidia,emc-mrs-wait-cnt = <0x000e000e>; + nvidia,emc-sel-dpd-ctrl = <0x00040128>; + nvidia,emc-xm2dqspadctrl2 = <0x0130b118>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00000000>; + + nvidia,emc-configuration = < + 0x00000000 /* EMC_RC */ + 0x00000007 /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x00000000 /* EMC_RAS */ + 0x00000000 /* EMC_RP */ + 0x00000004 /* EMC_R2W */ + 0x0000000a /* EMC_W2R */ + 0x00000005 /* EMC_R2P */ + 0x0000000b /* EMC_W2P */ + 0x00000000 /* EMC_RD_RCD */ + 0x00000000 /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000003 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000006 /* EMC_WDV */ + 0x00000006 /* EMC_WDV_MASK */ + 0x00000006 /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000005 /* EMC_EINPUT */ + 0x00000005 /* EMC_EINPUT_DURATION */ + 0x00010000 /* EMC_PUTERM_EXTRA */ + 0x00000003 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000004 /* EMC_QRST */ + 0x0000000c /* EMC_QSAFE */ + 0x0000000d /* EMC_RDV */ + 0x0000000f /* EMC_RDV_MASK */ + 0x0000009a /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x00000026 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x00000002 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000007 /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x00000008 /* EMC_TXSR */ + 0x00000008 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000005 /* EMC_TCKESR */ + 0x00000004 /* EMC_TPD */ + 0x00000000 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000005 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x000000a0 /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x106aa298 /* EMC_FBIO_CFG5 */ + 0x002c00a0 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x00064000 /* EMC_DLL_XFORM_DQS0 */ + 0x00064000 /* EMC_DLL_XFORM_DQS1 */ + 0x00064000 /* EMC_DLL_XFORM_DQS2 */ + 0x00064000 /* EMC_DLL_XFORM_DQS3 */ + 0x00064000 /* EMC_DLL_XFORM_DQS4 */ + 0x00064000 /* EMC_DLL_XFORM_DQS5 */ + 0x00064000 /* EMC_DLL_XFORM_DQS6 */ + 0x00064000 /* EMC_DLL_XFORM_DQS7 */ + 0x00064000 /* EMC_DLL_XFORM_DQS8 */ + 0x00064000 /* EMC_DLL_XFORM_DQS9 */ + 0x00064000 /* EMC_DLL_XFORM_DQS10 */ + 0x00064000 /* EMC_DLL_XFORM_DQS11 */ + 0x00064000 /* EMC_DLL_XFORM_DQS12 */ + 0x00064000 /* EMC_DLL_XFORM_DQS13 */ + 0x00064000 /* EMC_DLL_XFORM_DQS14 */ + 0x00064000 /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR0 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR1 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR3 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR4 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS15 */ + 0x00080000 /* EMC_DLL_XFORM_DQ0 */ + 0x00080000 /* EMC_DLL_XFORM_DQ1 */ + 0x00080000 /* EMC_DLL_XFORM_DQ2 */ + 0x00080000 /* EMC_DLL_XFORM_DQ3 */ + 0x00008000 /* EMC_DLL_XFORM_DQ4 */ + 0x00008000 /* EMC_DLL_XFORM_DQ5 */ + 0x00008000 /* EMC_DLL_XFORM_DQ6 */ + 0x00008000 /* EMC_DLL_XFORM_DQ7 */ + 0x10000280 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc081 /* EMC_XM2CLKPADCTRL */ + 0x00000303 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x0000003f /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x51451400 /* EMC_XM2DQSPADCTRL3 */ + 0x00514514 /* EMC_XM2DQSPADCTRL4 */ + 0x00514514 /* EMC_XM2DQSPADCTRL5 */ + 0x51451400 /* EMC_XM2DQSPADCTRL6 */ + 0x0000003f /* EMC_DSR_VTTGEN_DRV */ + 0x0000000b /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000042 /* EMC_ZCAL_WAIT_CNT */ + 0x000e000e /* EMC_MRS_WAIT_CNT2 */ + 0x00000000 /* EMC_CTT */ + 0x00000003 /* EMC_CTT_DURATION */ + 0x0000f2f3 /* EMC_CFG_PIPE */ + 0x8000023a /* EMC_DYN_SELF_REF_CONTROL */ + 0x0000000a /* EMC_QPOP */ + >; + }; + + timing-40800000 { + clock-frequency = <40800000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000008>; + nvidia,emc-cfg = <0x73240000>; + nvidia,emc-cfg-2 = <0x000008c5>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x00100003>; + nvidia,emc-mode-2 = <0x00200008>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x00001221>; + nvidia,emc-mrs-wait-cnt = <0x000e000e>; + nvidia,emc-sel-dpd-ctrl = <0x00040128>; + nvidia,emc-xm2dqspadctrl2 = <0x0130b118>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00000000>; + + nvidia,emc-configuration = < + 0x00000001 /* EMC_RC */ + 0x0000000e /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x00000001 /* EMC_RAS */ + 0x00000000 /* EMC_RP */ + 0x00000004 /* EMC_R2W */ + 0x0000000a /* EMC_W2R */ + 0x00000005 /* EMC_R2P */ + 0x0000000b /* EMC_W2P */ + 0x00000000 /* EMC_RD_RCD */ + 0x00000000 /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000003 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000006 /* EMC_WDV */ + 0x00000006 /* EMC_WDV_MASK */ + 0x00000006 /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000005 /* EMC_EINPUT */ + 0x00000005 /* EMC_EINPUT_DURATION */ + 0x00010000 /* EMC_PUTERM_EXTRA */ + 0x00000003 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000004 /* EMC_QRST */ + 0x0000000c /* EMC_QSAFE */ + 0x0000000d /* EMC_RDV */ + 0x0000000f /* EMC_RDV_MASK */ + 0x00000134 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x0000004d /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x00000002 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x0000000c /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x0000000f /* EMC_TXSR */ + 0x0000000f /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000005 /* EMC_TCKESR */ + 0x00000004 /* EMC_TPD */ + 0x00000000 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000005 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x0000013f /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x106aa298 /* EMC_FBIO_CFG5 */ + 0x002c00a0 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x00064000 /* EMC_DLL_XFORM_DQS0 */ + 0x00064000 /* EMC_DLL_XFORM_DQS1 */ + 0x00064000 /* EMC_DLL_XFORM_DQS2 */ + 0x00064000 /* EMC_DLL_XFORM_DQS3 */ + 0x00064000 /* EMC_DLL_XFORM_DQS4 */ + 0x00064000 /* EMC_DLL_XFORM_DQS5 */ + 0x00064000 /* EMC_DLL_XFORM_DQS6 */ + 0x00064000 /* EMC_DLL_XFORM_DQS7 */ + 0x00064000 /* EMC_DLL_XFORM_DQS8 */ + 0x00064000 /* EMC_DLL_XFORM_DQS9 */ + 0x00064000 /* EMC_DLL_XFORM_DQS10 */ + 0x00064000 /* EMC_DLL_XFORM_DQS11 */ + 0x00064000 /* EMC_DLL_XFORM_DQS12 */ + 0x00064000 /* EMC_DLL_XFORM_DQS13 */ + 0x00064000 /* EMC_DLL_XFORM_DQS14 */ + 0x00064000 /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR0 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR1 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR3 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR4 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS15 */ + 0x00080000 /* EMC_DLL_XFORM_DQ0 */ + 0x00080000 /* EMC_DLL_XFORM_DQ1 */ + 0x00080000 /* EMC_DLL_XFORM_DQ2 */ + 0x00080000 /* EMC_DLL_XFORM_DQ3 */ + 0x00008000 /* EMC_DLL_XFORM_DQ4 */ + 0x00008000 /* EMC_DLL_XFORM_DQ5 */ + 0x00008000 /* EMC_DLL_XFORM_DQ6 */ + 0x00008000 /* EMC_DLL_XFORM_DQ7 */ + 0x10000280 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc081 /* EMC_XM2CLKPADCTRL */ + 0x00000303 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x0000003f /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x51451400 /* EMC_XM2DQSPADCTRL3 */ + 0x00514514 /* EMC_XM2DQSPADCTRL4 */ + 0x00514514 /* EMC_XM2DQSPADCTRL5 */ + 0x51451400 /* EMC_XM2DQSPADCTRL6 */ + 0x0000003f /* EMC_DSR_VTTGEN_DRV */ + 0x00000015 /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000042 /* EMC_ZCAL_WAIT_CNT */ + 0x000e000e /* EMC_MRS_WAIT_CNT2 */ + 0x00000000 /* EMC_CTT */ + 0x00000003 /* EMC_CTT_DURATION */ + 0x0000f2f3 /* EMC_CFG_PIPE */ + 0x80000370 /* EMC_DYN_SELF_REF_CONTROL */ + 0x0000000a /* EMC_QPOP */ + >; + }; + + timing-68000000 { + clock-frequency = <68000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000008>; + nvidia,emc-cfg = <0x73240000>; + nvidia,emc-cfg-2 = <0x000008c5>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x00100003>; + nvidia,emc-mode-2 = <0x00200008>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x00001221>; + nvidia,emc-mrs-wait-cnt = <0x000e000e>; + nvidia,emc-sel-dpd-ctrl = <0x00040128>; + nvidia,emc-xm2dqspadctrl2 = <0x0130b118>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00000000>; + + nvidia,emc-configuration = < + 0x00000003 /* EMC_RC */ + 0x00000017 /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x00000002 /* EMC_RAS */ + 0x00000000 /* EMC_RP */ + 0x00000004 /* EMC_R2W */ + 0x0000000a /* EMC_W2R */ + 0x00000005 /* EMC_R2P */ + 0x0000000b /* EMC_W2P */ + 0x00000000 /* EMC_RD_RCD */ + 0x00000000 /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000003 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000006 /* EMC_WDV */ + 0x00000006 /* EMC_WDV_MASK */ + 0x00000006 /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000005 /* EMC_EINPUT */ + 0x00000005 /* EMC_EINPUT_DURATION */ + 0x00010000 /* EMC_PUTERM_EXTRA */ + 0x00000003 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000004 /* EMC_QRST */ + 0x0000000c /* EMC_QSAFE */ + 0x0000000d /* EMC_RDV */ + 0x0000000f /* EMC_RDV_MASK */ + 0x00000202 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x00000080 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x00000002 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000015 /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x00000019 /* EMC_TXSR */ + 0x00000019 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000005 /* EMC_TCKESR */ + 0x00000004 /* EMC_TPD */ + 0x00000001 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000005 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x00000213 /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x106aa298 /* EMC_FBIO_CFG5 */ + 0x002c00a0 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x00064000 /* EMC_DLL_XFORM_DQS0 */ + 0x00064000 /* EMC_DLL_XFORM_DQS1 */ + 0x00064000 /* EMC_DLL_XFORM_DQS2 */ + 0x00064000 /* EMC_DLL_XFORM_DQS3 */ + 0x00064000 /* EMC_DLL_XFORM_DQS4 */ + 0x00064000 /* EMC_DLL_XFORM_DQS5 */ + 0x00064000 /* EMC_DLL_XFORM_DQS6 */ + 0x00064000 /* EMC_DLL_XFORM_DQS7 */ + 0x00064000 /* EMC_DLL_XFORM_DQS8 */ + 0x00064000 /* EMC_DLL_XFORM_DQS9 */ + 0x00064000 /* EMC_DLL_XFORM_DQS10 */ + 0x00064000 /* EMC_DLL_XFORM_DQS11 */ + 0x00064000 /* EMC_DLL_XFORM_DQS12 */ + 0x00064000 /* EMC_DLL_XFORM_DQS13 */ + 0x00064000 /* EMC_DLL_XFORM_DQS14 */ + 0x00064000 /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR0 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR1 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR3 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR4 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS15 */ + 0x00080000 /* EMC_DLL_XFORM_DQ0 */ + 0x00080000 /* EMC_DLL_XFORM_DQ1 */ + 0x00080000 /* EMC_DLL_XFORM_DQ2 */ + 0x00080000 /* EMC_DLL_XFORM_DQ3 */ + 0x00008000 /* EMC_DLL_XFORM_DQ4 */ + 0x00008000 /* EMC_DLL_XFORM_DQ5 */ + 0x00008000 /* EMC_DLL_XFORM_DQ6 */ + 0x00008000 /* EMC_DLL_XFORM_DQ7 */ + 0x10000280 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc081 /* EMC_XM2CLKPADCTRL */ + 0x00000303 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x0000003f /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x51451400 /* EMC_XM2DQSPADCTRL3 */ + 0x00514514 /* EMC_XM2DQSPADCTRL4 */ + 0x00514514 /* EMC_XM2DQSPADCTRL5 */ + 0x51451400 /* EMC_XM2DQSPADCTRL6 */ + 0x0000003f /* EMC_DSR_VTTGEN_DRV */ + 0x00000022 /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000042 /* EMC_ZCAL_WAIT_CNT */ + 0x000e000e /* EMC_MRS_WAIT_CNT2 */ + 0x00000000 /* EMC_CTT */ + 0x00000003 /* EMC_CTT_DURATION */ + 0x0000f2f3 /* EMC_CFG_PIPE */ + 0x8000050e /* EMC_DYN_SELF_REF_CONTROL */ + 0x0000000a /* EMC_QPOP */ + >; + }; + + timing-102000000 { + clock-frequency = <102000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000008>; + nvidia,emc-cfg = <0x73240000>; + nvidia,emc-cfg-2 = <0x000008c5>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x00100003>; + nvidia,emc-mode-2 = <0x00200008>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x00001221>; + nvidia,emc-mrs-wait-cnt = <0x000e000e>; + nvidia,emc-sel-dpd-ctrl = <0x00040128>; + nvidia,emc-xm2dqspadctrl2 = <0x0130b118>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00000000>; + + nvidia,emc-configuration = < + 0x00000004 /* EMC_RC */ + 0x00000023 /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x00000003 /* EMC_RAS */ + 0x00000001 /* EMC_RP */ + 0x00000004 /* EMC_R2W */ + 0x0000000a /* EMC_W2R */ + 0x00000005 /* EMC_R2P */ + 0x0000000b /* EMC_W2P */ + 0x00000001 /* EMC_RD_RCD */ + 0x00000001 /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000003 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000006 /* EMC_WDV */ + 0x00000006 /* EMC_WDV_MASK */ + 0x00000006 /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000005 /* EMC_EINPUT */ + 0x00000005 /* EMC_EINPUT_DURATION */ + 0x00010000 /* EMC_PUTERM_EXTRA */ + 0x00000003 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000004 /* EMC_QRST */ + 0x0000000c /* EMC_QSAFE */ + 0x0000000d /* EMC_RDV */ + 0x0000000f /* EMC_RDV_MASK */ + 0x00000304 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x000000c1 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x00000002 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000021 /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x00000025 /* EMC_TXSR */ + 0x00000025 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000005 /* EMC_TCKESR */ + 0x00000004 /* EMC_TPD */ + 0x00000003 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000005 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x0000031c /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x106aa298 /* EMC_FBIO_CFG5 */ + 0x002c00a0 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x00064000 /* EMC_DLL_XFORM_DQS0 */ + 0x00064000 /* EMC_DLL_XFORM_DQS1 */ + 0x00064000 /* EMC_DLL_XFORM_DQS2 */ + 0x00064000 /* EMC_DLL_XFORM_DQS3 */ + 0x00064000 /* EMC_DLL_XFORM_DQS4 */ + 0x00064000 /* EMC_DLL_XFORM_DQS5 */ + 0x00064000 /* EMC_DLL_XFORM_DQS6 */ + 0x00064000 /* EMC_DLL_XFORM_DQS7 */ + 0x00064000 /* EMC_DLL_XFORM_DQS8 */ + 0x00064000 /* EMC_DLL_XFORM_DQS9 */ + 0x00064000 /* EMC_DLL_XFORM_DQS10 */ + 0x00064000 /* EMC_DLL_XFORM_DQS11 */ + 0x00064000 /* EMC_DLL_XFORM_DQS12 */ + 0x00064000 /* EMC_DLL_XFORM_DQS13 */ + 0x00064000 /* EMC_DLL_XFORM_DQS14 */ + 0x00064000 /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR0 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR1 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR3 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR4 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS15 */ + 0x00080000 /* EMC_DLL_XFORM_DQ0 */ + 0x00080000 /* EMC_DLL_XFORM_DQ1 */ + 0x00080000 /* EMC_DLL_XFORM_DQ2 */ + 0x00080000 /* EMC_DLL_XFORM_DQ3 */ + 0x00008000 /* EMC_DLL_XFORM_DQ4 */ + 0x00008000 /* EMC_DLL_XFORM_DQ5 */ + 0x00008000 /* EMC_DLL_XFORM_DQ6 */ + 0x00008000 /* EMC_DLL_XFORM_DQ7 */ + 0x10000280 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc081 /* EMC_XM2CLKPADCTRL */ + 0x00000303 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x0000003f /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x51451400 /* EMC_XM2DQSPADCTRL3 */ + 0x00514514 /* EMC_XM2DQSPADCTRL4 */ + 0x00514514 /* EMC_XM2DQSPADCTRL5 */ + 0x51451400 /* EMC_XM2DQSPADCTRL6 */ + 0x0000003f /* EMC_DSR_VTTGEN_DRV */ + 0x00000033 /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000042 /* EMC_ZCAL_WAIT_CNT */ + 0x000e000e /* EMC_MRS_WAIT_CNT2 */ + 0x00000000 /* EMC_CTT */ + 0x00000003 /* EMC_CTT_DURATION */ + 0x0000f2f3 /* EMC_CFG_PIPE */ + 0x80000713 /* EMC_DYN_SELF_REF_CONTROL */ + 0x0000000a /* EMC_QPOP */ + >; + }; + + timing-204000000 { + clock-frequency = <204000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000008>; + nvidia,emc-cfg = <0x73240000>; + nvidia,emc-cfg-2 = <0x0000088d>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x00100003>; + nvidia,emc-mode-2 = <0x00200008>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x00001221>; + nvidia,emc-mrs-wait-cnt = <0x000e000e>; + nvidia,emc-sel-dpd-ctrl = <0x00040008>; + nvidia,emc-xm2dqspadctrl2 = <0x0130b118>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00020000>; + + nvidia,emc-configuration = < + 0x00000009 /* EMC_RC */ + 0x00000047 /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x00000006 /* EMC_RAS */ + 0x00000002 /* EMC_RP */ + 0x00000005 /* EMC_R2W */ + 0x0000000a /* EMC_W2R */ + 0x00000005 /* EMC_R2P */ + 0x0000000b /* EMC_W2P */ + 0x00000002 /* EMC_RD_RCD */ + 0x00000002 /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000003 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000005 /* EMC_WDV */ + 0x00000005 /* EMC_WDV_MASK */ + 0x00000006 /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000004 /* EMC_EINPUT */ + 0x00000006 /* EMC_EINPUT_DURATION */ + 0x00010000 /* EMC_PUTERM_EXTRA */ + 0x00000003 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000003 /* EMC_QRST */ + 0x0000000d /* EMC_QSAFE */ + 0x0000000f /* EMC_RDV */ + 0x00000011 /* EMC_RDV_MASK */ + 0x00000607 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x00000181 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x00000002 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000044 /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x0000004a /* EMC_TXSR */ + 0x0000004a /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000005 /* EMC_TCKESR */ + 0x00000004 /* EMC_TPD */ + 0x00000007 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000005 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x00000638 /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x106aa298 /* EMC_FBIO_CFG5 */ + 0x002c00a0 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x00064000 /* EMC_DLL_XFORM_DQS0 */ + 0x00064000 /* EMC_DLL_XFORM_DQS1 */ + 0x00064000 /* EMC_DLL_XFORM_DQS2 */ + 0x00064000 /* EMC_DLL_XFORM_DQS3 */ + 0x00064000 /* EMC_DLL_XFORM_DQS4 */ + 0x00064000 /* EMC_DLL_XFORM_DQS5 */ + 0x00064000 /* EMC_DLL_XFORM_DQS6 */ + 0x00064000 /* EMC_DLL_XFORM_DQS7 */ + 0x00064000 /* EMC_DLL_XFORM_DQS8 */ + 0x00064000 /* EMC_DLL_XFORM_DQS9 */ + 0x00064000 /* EMC_DLL_XFORM_DQS10 */ + 0x00064000 /* EMC_DLL_XFORM_DQS11 */ + 0x00064000 /* EMC_DLL_XFORM_DQS12 */ + 0x00064000 /* EMC_DLL_XFORM_DQS13 */ + 0x00064000 /* EMC_DLL_XFORM_DQS14 */ + 0x00064000 /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR0 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR1 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR3 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR4 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS15 */ + 0x00090000 /* EMC_DLL_XFORM_DQ0 */ + 0x00090000 /* EMC_DLL_XFORM_DQ1 */ + 0x00094000 /* EMC_DLL_XFORM_DQ2 */ + 0x00094000 /* EMC_DLL_XFORM_DQ3 */ + 0x00009400 /* EMC_DLL_XFORM_DQ4 */ + 0x00009000 /* EMC_DLL_XFORM_DQ5 */ + 0x00009000 /* EMC_DLL_XFORM_DQ6 */ + 0x00009000 /* EMC_DLL_XFORM_DQ7 */ + 0x10000280 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc081 /* EMC_XM2CLKPADCTRL */ + 0x00000303 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x0000003f /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x51451400 /* EMC_XM2DQSPADCTRL3 */ + 0x00514514 /* EMC_XM2DQSPADCTRL4 */ + 0x00514514 /* EMC_XM2DQSPADCTRL5 */ + 0x51451400 /* EMC_XM2DQSPADCTRL6 */ + 0x0000003f /* EMC_DSR_VTTGEN_DRV */ + 0x00000066 /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000100 /* EMC_ZCAL_WAIT_CNT */ + 0x000e000e /* EMC_MRS_WAIT_CNT2 */ + 0x00000000 /* EMC_CTT */ + 0x00000003 /* EMC_CTT_DURATION */ + 0x0000d2b3 /* EMC_CFG_PIPE */ + 0x80000d22 /* EMC_DYN_SELF_REF_CONTROL */ + 0x0000000a /* EMC_QPOP */ + >; + }; + + timing-300000000 { + clock-frequency = <300000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000000>; + nvidia,emc-cfg = <0x73340000>; + nvidia,emc-cfg-2 = <0x000008d5>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x00100002>; + nvidia,emc-mode-2 = <0x00200000>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x00000321>; + nvidia,emc-mrs-wait-cnt = <0x0117000e>; + nvidia,emc-sel-dpd-ctrl = <0x00040128>; + nvidia,emc-xm2dqspadctrl2 = <0x01231339>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00020000>; + + nvidia,emc-configuration = < + 0x0000000d /* EMC_RC */ + 0x00000067 /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x00000009 /* EMC_RAS */ + 0x00000003 /* EMC_RP */ + 0x00000004 /* EMC_R2W */ + 0x00000008 /* EMC_W2R */ + 0x00000002 /* EMC_R2P */ + 0x00000009 /* EMC_W2P */ + 0x00000003 /* EMC_RD_RCD */ + 0x00000003 /* EMC_WR_RCD */ + 0x00000002 /* EMC_RRD */ + 0x00000002 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000003 /* EMC_WDV */ + 0x00000003 /* EMC_WDV_MASK */ + 0x00000005 /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000002 /* EMC_EINPUT */ + 0x00000007 /* EMC_EINPUT_DURATION */ + 0x00020000 /* EMC_PUTERM_EXTRA */ + 0x00000003 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000001 /* EMC_QRST */ + 0x0000000e /* EMC_QSAFE */ + 0x00000010 /* EMC_RDV */ + 0x00000012 /* EMC_RDV_MASK */ + 0x000008e4 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x00000239 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000001 /* EMC_PDEX2WR */ + 0x00000008 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000065 /* EMC_AR2PDEN */ + 0x0000000e /* EMC_RW2PDEN */ + 0x0000006c /* EMC_TXSR */ + 0x00000200 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000005 /* EMC_TCKESR */ + 0x00000004 /* EMC_TPD */ + 0x00000009 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000005 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x00000924 /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x104ab098 /* EMC_FBIO_CFG5 */ + 0x002c00a0 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x00030000 /* EMC_DLL_XFORM_DQS0 */ + 0x00030000 /* EMC_DLL_XFORM_DQS1 */ + 0x00030000 /* EMC_DLL_XFORM_DQS2 */ + 0x00030000 /* EMC_DLL_XFORM_DQS3 */ + 0x00030000 /* EMC_DLL_XFORM_DQS4 */ + 0x00030000 /* EMC_DLL_XFORM_DQS5 */ + 0x00030000 /* EMC_DLL_XFORM_DQS6 */ + 0x00030000 /* EMC_DLL_XFORM_DQS7 */ + 0x00030000 /* EMC_DLL_XFORM_DQS8 */ + 0x00030000 /* EMC_DLL_XFORM_DQS9 */ + 0x00030000 /* EMC_DLL_XFORM_DQS10 */ + 0x00030000 /* EMC_DLL_XFORM_DQS11 */ + 0x00030000 /* EMC_DLL_XFORM_DQS12 */ + 0x00030000 /* EMC_DLL_XFORM_DQS13 */ + 0x00030000 /* EMC_DLL_XFORM_DQS14 */ + 0x00030000 /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00098000 /* EMC_DLL_XFORM_ADDR0 */ + 0x00098000 /* EMC_DLL_XFORM_ADDR1 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00098000 /* EMC_DLL_XFORM_ADDR3 */ + 0x00098000 /* EMC_DLL_XFORM_ADDR4 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS15 */ + 0x00060000 /* EMC_DLL_XFORM_DQ0 */ + 0x00060000 /* EMC_DLL_XFORM_DQ1 */ + 0x00060000 /* EMC_DLL_XFORM_DQ2 */ + 0x00060000 /* EMC_DLL_XFORM_DQ3 */ + 0x00006000 /* EMC_DLL_XFORM_DQ4 */ + 0x00006000 /* EMC_DLL_XFORM_DQ5 */ + 0x00006000 /* EMC_DLL_XFORM_DQ6 */ + 0x00006000 /* EMC_DLL_XFORM_DQ7 */ + 0x10000280 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc081 /* EMC_XM2CLKPADCTRL */ + 0x00000101 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x00000000 /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x51451420 /* EMC_XM2DQSPADCTRL3 */ + 0x00514514 /* EMC_XM2DQSPADCTRL4 */ + 0x00514514 /* EMC_XM2DQSPADCTRL5 */ + 0x51451400 /* EMC_XM2DQSPADCTRL6 */ + 0x0000003f /* EMC_DSR_VTTGEN_DRV */ + 0x00000096 /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000100 /* EMC_ZCAL_WAIT_CNT */ + 0x0117000e /* EMC_MRS_WAIT_CNT2 */ + 0x00000000 /* EMC_CTT */ + 0x00000003 /* EMC_CTT_DURATION */ + 0x000052a3 /* EMC_CFG_PIPE */ + 0x800012d7 /* EMC_DYN_SELF_REF_CONTROL */ + 0x00000009 /* EMC_QPOP */ + >; + }; + + timing-396000000 { + clock-frequency = <396000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000000>; + nvidia,emc-cfg = <0x73340000>; + nvidia,emc-cfg-2 = <0x00000895>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x00100002>; + nvidia,emc-mode-2 = <0x00200000>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x00000521>; + nvidia,emc-mrs-wait-cnt = <0x00f5000e>; + nvidia,emc-sel-dpd-ctrl = <0x00040008>; + nvidia,emc-xm2dqspadctrl2 = <0x01231339>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00020000>; + + nvidia,emc-configuration = < + 0x00000011 /* EMC_RC */ + 0x00000089 /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x0000000c /* EMC_RAS */ + 0x00000004 /* EMC_RP */ + 0x00000005 /* EMC_R2W */ + 0x00000008 /* EMC_W2R */ + 0x00000002 /* EMC_R2P */ + 0x0000000a /* EMC_W2P */ + 0x00000004 /* EMC_RD_RCD */ + 0x00000004 /* EMC_WR_RCD */ + 0x00000002 /* EMC_RRD */ + 0x00000002 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000003 /* EMC_WDV */ + 0x00000003 /* EMC_WDV_MASK */ + 0x00000005 /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000001 /* EMC_EINPUT */ + 0x00000008 /* EMC_EINPUT_DURATION */ + 0x00020000 /* EMC_PUTERM_EXTRA */ + 0x00000003 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000000 /* EMC_QRST */ + 0x0000000f /* EMC_QSAFE */ + 0x00000010 /* EMC_RDV */ + 0x00000012 /* EMC_RDV_MASK */ + 0x00000bd1 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x000002f4 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000001 /* EMC_PDEX2WR */ + 0x00000008 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000087 /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x0000008f /* EMC_TXSR */ + 0x00000200 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000005 /* EMC_TCKESR */ + 0x00000004 /* EMC_TPD */ + 0x0000000d /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000005 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x00000c11 /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x104ab098 /* EMC_FBIO_CFG5 */ + 0x002c00a0 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x00030000 /* EMC_DLL_XFORM_DQS0 */ + 0x00030000 /* EMC_DLL_XFORM_DQS1 */ + 0x00030000 /* EMC_DLL_XFORM_DQS2 */ + 0x00030000 /* EMC_DLL_XFORM_DQS3 */ + 0x00030000 /* EMC_DLL_XFORM_DQS4 */ + 0x00030000 /* EMC_DLL_XFORM_DQS5 */ + 0x00030000 /* EMC_DLL_XFORM_DQS6 */ + 0x00030000 /* EMC_DLL_XFORM_DQS7 */ + 0x00030000 /* EMC_DLL_XFORM_DQS8 */ + 0x00030000 /* EMC_DLL_XFORM_DQS9 */ + 0x00030000 /* EMC_DLL_XFORM_DQS10 */ + 0x00030000 /* EMC_DLL_XFORM_DQS11 */ + 0x00030000 /* EMC_DLL_XFORM_DQS12 */ + 0x00030000 /* EMC_DLL_XFORM_DQS13 */ + 0x00030000 /* EMC_DLL_XFORM_DQS14 */ + 0x00030000 /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00070000 /* EMC_DLL_XFORM_ADDR0 */ + 0x00070000 /* EMC_DLL_XFORM_ADDR1 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00070000 /* EMC_DLL_XFORM_ADDR3 */ + 0x00070000 /* EMC_DLL_XFORM_ADDR4 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS15 */ + 0x00048000 /* EMC_DLL_XFORM_DQ0 */ + 0x00048000 /* EMC_DLL_XFORM_DQ1 */ + 0x00048000 /* EMC_DLL_XFORM_DQ2 */ + 0x00048000 /* EMC_DLL_XFORM_DQ3 */ + 0x00004800 /* EMC_DLL_XFORM_DQ4 */ + 0x00004800 /* EMC_DLL_XFORM_DQ5 */ + 0x00004800 /* EMC_DLL_XFORM_DQ6 */ + 0x00004800 /* EMC_DLL_XFORM_DQ7 */ + 0x10000280 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc081 /* EMC_XM2CLKPADCTRL */ + 0x00000101 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x00000000 /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x51451420 /* EMC_XM2DQSPADCTRL3 */ + 0x00514514 /* EMC_XM2DQSPADCTRL4 */ + 0x00514514 /* EMC_XM2DQSPADCTRL5 */ + 0x51451400 /* EMC_XM2DQSPADCTRL6 */ + 0x0000003f /* EMC_DSR_VTTGEN_DRV */ + 0x000000c6 /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000100 /* EMC_ZCAL_WAIT_CNT */ + 0x00f5000e /* EMC_MRS_WAIT_CNT2 */ + 0x00000000 /* EMC_CTT */ + 0x00000003 /* EMC_CTT_DURATION */ + 0x000052a3 /* EMC_CFG_PIPE */ + 0x8000188b /* EMC_DYN_SELF_REF_CONTROL */ + 0x00000009 /* EMC_QPOP */ + >; + }; + + timing-528000000 { + clock-frequency = <528000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000000>; + nvidia,emc-cfg = <0x73300000>; + nvidia,emc-cfg-2 = <0x0000089d>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x00100002>; + nvidia,emc-mode-2 = <0x00200008>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x00000941>; + nvidia,emc-mrs-wait-cnt = <0x00c8000e>; + nvidia,emc-sel-dpd-ctrl = <0x00040008>; + nvidia,emc-xm2dqspadctrl2 = <0x0123133d>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00020000>; + + nvidia,emc-configuration = < + 0x00000018 /* EMC_RC */ + 0x000000b7 /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x00000010 /* EMC_RAS */ + 0x00000006 /* EMC_RP */ + 0x00000006 /* EMC_R2W */ + 0x00000009 /* EMC_W2R */ + 0x00000002 /* EMC_R2P */ + 0x0000000d /* EMC_W2P */ + 0x00000006 /* EMC_RD_RCD */ + 0x00000006 /* EMC_WR_RCD */ + 0x00000002 /* EMC_RRD */ + 0x00000002 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000003 /* EMC_WDV */ + 0x00000003 /* EMC_WDV_MASK */ + 0x00000007 /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000002 /* EMC_EINPUT */ + 0x00000009 /* EMC_EINPUT_DURATION */ + 0x00040000 /* EMC_PUTERM_EXTRA */ + 0x00000003 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000001 /* EMC_QRST */ + 0x00000010 /* EMC_QSAFE */ + 0x00000013 /* EMC_RDV */ + 0x00000015 /* EMC_RDV_MASK */ + 0x00000fd6 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x000003f5 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x0000000b /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x000000b4 /* EMC_AR2PDEN */ + 0x00000012 /* EMC_RW2PDEN */ + 0x000000bf /* EMC_TXSR */ + 0x00000200 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000005 /* EMC_TCKESR */ + 0x00000004 /* EMC_TPD */ + 0x00000013 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000006 /* EMC_TCLKSTABLE */ + 0x00000006 /* EMC_TCLKSTOP */ + 0x00001017 /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x104ab098 /* EMC_FBIO_CFG5 */ + 0xe01200b1 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x0000000a /* EMC_DLL_XFORM_DQS0 */ + 0x0000000a /* EMC_DLL_XFORM_DQS1 */ + 0x0000000a /* EMC_DLL_XFORM_DQS2 */ + 0x0000000a /* EMC_DLL_XFORM_DQS3 */ + 0x0000000a /* EMC_DLL_XFORM_DQS4 */ + 0x0000000a /* EMC_DLL_XFORM_DQS5 */ + 0x0000000a /* EMC_DLL_XFORM_DQS6 */ + 0x0000000a /* EMC_DLL_XFORM_DQS7 */ + 0x0000000a /* EMC_DLL_XFORM_DQS8 */ + 0x0000000a /* EMC_DLL_XFORM_DQS9 */ + 0x0000000a /* EMC_DLL_XFORM_DQS10 */ + 0x0000000a /* EMC_DLL_XFORM_DQS11 */ + 0x0000000a /* EMC_DLL_XFORM_DQS12 */ + 0x0000000a /* EMC_DLL_XFORM_DQS13 */ + 0x0000000a /* EMC_DLL_XFORM_DQS14 */ + 0x0000000a /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00050000 /* EMC_DLL_XFORM_ADDR0 */ + 0x00050000 /* EMC_DLL_XFORM_ADDR1 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00050000 /* EMC_DLL_XFORM_ADDR3 */ + 0x00050000 /* EMC_DLL_XFORM_ADDR4 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000002 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000002 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000003 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000004 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000001 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000004 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000003 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000002 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000002 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000003 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000004 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000001 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000004 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000003 /* EMC_DLI_TRIM_TXDQS15 */ + 0x0000000e /* EMC_DLL_XFORM_DQ0 */ + 0x0000000e /* EMC_DLL_XFORM_DQ1 */ + 0x0000000e /* EMC_DLL_XFORM_DQ2 */ + 0x0000000e /* EMC_DLL_XFORM_DQ3 */ + 0x0000000e /* EMC_DLL_XFORM_DQ4 */ + 0x0000000e /* EMC_DLL_XFORM_DQ5 */ + 0x0000000e /* EMC_DLL_XFORM_DQ6 */ + 0x0000000e /* EMC_DLL_XFORM_DQ7 */ + 0x100002a0 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc085 /* EMC_XM2CLKPADCTRL */ + 0x00000101 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x00000000 /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x51451420 /* EMC_XM2DQSPADCTRL3 */ + 0x00514514 /* EMC_XM2DQSPADCTRL4 */ + 0x00514514 /* EMC_XM2DQSPADCTRL5 */ + 0x51451400 /* EMC_XM2DQSPADCTRL6 */ + 0x0606003f /* EMC_DSR_VTTGEN_DRV */ + 0x00000000 /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000100 /* EMC_ZCAL_WAIT_CNT */ + 0x00c8000e /* EMC_MRS_WAIT_CNT2 */ + 0x00000000 /* EMC_CTT */ + 0x00000003 /* EMC_CTT_DURATION */ + 0x000042a0 /* EMC_CFG_PIPE */ + 0x80002062 /* EMC_DYN_SELF_REF_CONTROL */ + 0x0000000b /* EMC_QPOP */ + >; + }; + + timing-600000000 { + clock-frequency = <600000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000000>; + nvidia,emc-cfg = <0x73300000>; + nvidia,emc-cfg-2 = <0x0000089d>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x00100002>; + nvidia,emc-mode-2 = <0x00200010>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x00000b61>; + nvidia,emc-mrs-wait-cnt = <0x00b0000e>; + nvidia,emc-sel-dpd-ctrl = <0x00040008>; + nvidia,emc-xm2dqspadctrl2 = <0x0121113d>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00020000>; + + nvidia,emc-configuration = < + 0x0000001b /* EMC_RC */ + 0x000000d0 /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x00000013 /* EMC_RAS */ + 0x00000007 /* EMC_RP */ + 0x00000007 /* EMC_R2W */ + 0x0000000b /* EMC_W2R */ + 0x00000003 /* EMC_R2P */ + 0x00000010 /* EMC_W2P */ + 0x00000007 /* EMC_RD_RCD */ + 0x00000007 /* EMC_WR_RCD */ + 0x00000002 /* EMC_RRD */ + 0x00000002 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000005 /* EMC_WDV */ + 0x00000005 /* EMC_WDV_MASK */ + 0x0000000a /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000003 /* EMC_EINPUT */ + 0x0000000b /* EMC_EINPUT_DURATION */ + 0x00070000 /* EMC_PUTERM_EXTRA */ + 0x00000003 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000002 /* EMC_QRST */ + 0x00000012 /* EMC_QSAFE */ + 0x00000016 /* EMC_RDV */ + 0x00000018 /* EMC_RDV_MASK */ + 0x00001208 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x00000482 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x0000000d /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x000000cc /* EMC_AR2PDEN */ + 0x00000015 /* EMC_RW2PDEN */ + 0x000000d8 /* EMC_TXSR */ + 0x00000200 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000005 /* EMC_TCKESR */ + 0x00000004 /* EMC_TPD */ + 0x00000015 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000006 /* EMC_TCLKSTABLE */ + 0x00000006 /* EMC_TCLKSTOP */ + 0x00001249 /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x104ab098 /* EMC_FBIO_CFG5 */ + 0xe00e00b1 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x0000000a /* EMC_DLL_XFORM_DQS0 */ + 0x0000000a /* EMC_DLL_XFORM_DQS1 */ + 0x0000000a /* EMC_DLL_XFORM_DQS2 */ + 0x0000000a /* EMC_DLL_XFORM_DQS3 */ + 0x0000000a /* EMC_DLL_XFORM_DQS4 */ + 0x0000000a /* EMC_DLL_XFORM_DQS5 */ + 0x0000000a /* EMC_DLL_XFORM_DQS6 */ + 0x0000000a /* EMC_DLL_XFORM_DQS7 */ + 0x0000000a /* EMC_DLL_XFORM_DQS8 */ + 0x0000000a /* EMC_DLL_XFORM_DQS9 */ + 0x0000000a /* EMC_DLL_XFORM_DQS10 */ + 0x0000000a /* EMC_DLL_XFORM_DQS11 */ + 0x0000000a /* EMC_DLL_XFORM_DQS12 */ + 0x0000000a /* EMC_DLL_XFORM_DQS13 */ + 0x0000000a /* EMC_DLL_XFORM_DQS14 */ + 0x0000000a /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00048000 /* EMC_DLL_XFORM_ADDR0 */ + 0x00048000 /* EMC_DLL_XFORM_ADDR1 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00048000 /* EMC_DLL_XFORM_ADDR3 */ + 0x00048000 /* EMC_DLL_XFORM_ADDR4 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000004 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000004 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000002 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000005 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000006 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000003 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000006 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000005 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000004 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000004 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000002 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000005 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000006 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000003 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000006 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000005 /* EMC_DLI_TRIM_TXDQS15 */ + 0x0000000e /* EMC_DLL_XFORM_DQ0 */ + 0x0000000e /* EMC_DLL_XFORM_DQ1 */ + 0x0000000e /* EMC_DLL_XFORM_DQ2 */ + 0x0000000e /* EMC_DLL_XFORM_DQ3 */ + 0x0000000e /* EMC_DLL_XFORM_DQ4 */ + 0x0000000e /* EMC_DLL_XFORM_DQ5 */ + 0x0000000e /* EMC_DLL_XFORM_DQ6 */ + 0x0000000e /* EMC_DLL_XFORM_DQ7 */ + 0x100002a0 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc085 /* EMC_XM2CLKPADCTRL */ + 0x00000101 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x00000000 /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x51451420 /* EMC_XM2DQSPADCTRL3 */ + 0x00514514 /* EMC_XM2DQSPADCTRL4 */ + 0x00514514 /* EMC_XM2DQSPADCTRL5 */ + 0x51451400 /* EMC_XM2DQSPADCTRL6 */ + 0x0606003f /* EMC_DSR_VTTGEN_DRV */ + 0x00000000 /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000100 /* EMC_ZCAL_WAIT_CNT */ + 0x00b0000e /* EMC_MRS_WAIT_CNT2 */ + 0x00000000 /* EMC_CTT */ + 0x00000003 /* EMC_CTT_DURATION */ + 0x000040a0 /* EMC_CFG_PIPE */ + 0x800024aa /* EMC_DYN_SELF_REF_CONTROL */ + 0x0000000e /* EMC_QPOP */ + >; + }; + + timing-792000000 { + clock-frequency = <792000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000000>; + nvidia,emc-cfg = <0x73300000>; + nvidia,emc-cfg-2 = <0x0080089d>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x00100002>; + nvidia,emc-mode-2 = <0x00200418>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x00000d71>; + nvidia,emc-mrs-wait-cnt = <0x006f000e>; + nvidia,emc-sel-dpd-ctrl = <0x00040000>; + nvidia,emc-xm2dqspadctrl2 = <0x0120113d>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00020000>; + + nvidia,emc-configuration = < + 0x00000024 /* EMC_RC */ + 0x00000114 /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x00000019 /* EMC_RAS */ + 0x0000000a /* EMC_RP */ + 0x00000008 /* EMC_R2W */ + 0x0000000d /* EMC_W2R */ + 0x00000004 /* EMC_R2P */ + 0x00000013 /* EMC_W2P */ + 0x0000000a /* EMC_RD_RCD */ + 0x0000000a /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000002 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000006 /* EMC_WDV */ + 0x00000006 /* EMC_WDV_MASK */ + 0x0000000b /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000002 /* EMC_EINPUT */ + 0x0000000d /* EMC_EINPUT_DURATION */ + 0x00080000 /* EMC_PUTERM_EXTRA */ + 0x00000004 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000001 /* EMC_QRST */ + 0x00000014 /* EMC_QSAFE */ + 0x00000018 /* EMC_RDV */ + 0x0000001a /* EMC_RDV_MASK */ + 0x000017e2 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x000005f8 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000003 /* EMC_PDEX2WR */ + 0x00000011 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x0000010d /* EMC_AR2PDEN */ + 0x00000018 /* EMC_RW2PDEN */ + 0x0000011e /* EMC_TXSR */ + 0x00000200 /* EMC_TXSRDLL */ + 0x00000005 /* EMC_TCKE */ + 0x00000006 /* EMC_TCKESR */ + 0x00000005 /* EMC_TPD */ + 0x0000001d /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000008 /* EMC_TCLKSTABLE */ + 0x00000008 /* EMC_TCLKSTOP */ + 0x00001822 /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x80000005 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x104ab198 /* EMC_FBIO_CFG5 */ + 0xe00700b1 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x007fc007 /* EMC_DLL_XFORM_DQS0 */ + 0x007fc008 /* EMC_DLL_XFORM_DQS1 */ + 0x007f400c /* EMC_DLL_XFORM_DQS2 */ + 0x007fc007 /* EMC_DLL_XFORM_DQS3 */ + 0x007f4006 /* EMC_DLL_XFORM_DQS4 */ + 0x007f8004 /* EMC_DLL_XFORM_DQS5 */ + 0x007f8005 /* EMC_DLL_XFORM_DQS6 */ + 0x007f8004 /* EMC_DLL_XFORM_DQS7 */ + 0x007fc007 /* EMC_DLL_XFORM_DQS8 */ + 0x007fc008 /* EMC_DLL_XFORM_DQS9 */ + 0x007f400c /* EMC_DLL_XFORM_DQS10 */ + 0x007fc007 /* EMC_DLL_XFORM_DQS11 */ + 0x007f4006 /* EMC_DLL_XFORM_DQS12 */ + 0x007f8004 /* EMC_DLL_XFORM_DQS13 */ + 0x007f8005 /* EMC_DLL_XFORM_DQS14 */ + 0x007f8004 /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00034000 /* EMC_DLL_XFORM_ADDR0 */ + 0x00034000 /* EMC_DLL_XFORM_ADDR1 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00034000 /* EMC_DLL_XFORM_ADDR3 */ + 0x00034000 /* EMC_DLL_XFORM_ADDR4 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000006 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000008 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000005 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000009 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000006 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000007 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000006 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000006 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000008 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000008 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000005 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000009 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000006 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000007 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000006 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000008 /* EMC_DLI_TRIM_TXDQS15 */ + 0x0000000e /* EMC_DLL_XFORM_DQ0 */ + 0x0000000e /* EMC_DLL_XFORM_DQ1 */ + 0x0000000e /* EMC_DLL_XFORM_DQ2 */ + 0x0000000e /* EMC_DLL_XFORM_DQ3 */ + 0x0000000e /* EMC_DLL_XFORM_DQ4 */ + 0x0000000e /* EMC_DLL_XFORM_DQ5 */ + 0x0000000e /* EMC_DLL_XFORM_DQ6 */ + 0x0000000e /* EMC_DLL_XFORM_DQ7 */ + 0x100002a0 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc085 /* EMC_XM2CLKPADCTRL */ + 0x00000101 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x00000000 /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x61861820 /* EMC_XM2DQSPADCTRL3 */ + 0x00492492 /* EMC_XM2DQSPADCTRL4 */ + 0x00492492 /* EMC_XM2DQSPADCTRL5 */ + 0x61861800 /* EMC_XM2DQSPADCTRL6 */ + 0x0606003f /* EMC_DSR_VTTGEN_DRV */ + 0x00000000 /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000100 /* EMC_ZCAL_WAIT_CNT */ + 0x006f000e /* EMC_MRS_WAIT_CNT2 */ + 0x00000007 /* EMC_CTT */ + 0x00000004 /* EMC_CTT_DURATION */ + 0x00004080 /* EMC_CFG_PIPE */ + 0x80003012 /* EMC_DYN_SELF_REF_CONTROL */ + 0x0000000f /* EMC_QPOP */ + >; + }; + }; + + emc-timings-6 { + nvidia,ram-code = <6>; + + timing-12750000 { + clock-frequency = <12750000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000008>; + nvidia,emc-cfg = <0x73240000>; + nvidia,emc-cfg-2 = <0x000008c5>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-mrs-wait-cnt = <0x000c000c>; + nvidia,emc-sel-dpd-ctrl = <0x00040128>; + nvidia,emc-xm2dqspadctrl2 = <0x0130b118>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00000000>; + + nvidia,emc-configuration = < + 0x00000000 /* EMC_RC */ + 0x00000003 /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x00000000 /* EMC_RAS */ + 0x00000000 /* EMC_RP */ + 0x00000004 /* EMC_R2W */ + 0x0000000a /* EMC_W2R */ + 0x00000003 /* EMC_R2P */ + 0x0000000b /* EMC_W2P */ + 0x00000000 /* EMC_RD_RCD */ + 0x00000000 /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000003 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000006 /* EMC_WDV */ + 0x00000006 /* EMC_WDV_MASK */ + 0x00000006 /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000005 /* EMC_EINPUT */ + 0x00000005 /* EMC_EINPUT_DURATION */ + 0x00010000 /* EMC_PUTERM_EXTRA */ + 0x00000003 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000004 /* EMC_QRST */ + 0x0000000c /* EMC_QSAFE */ + 0x0000000d /* EMC_RDV */ + 0x0000000f /* EMC_RDV_MASK */ + 0x00000060 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x00000018 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x00000002 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000007 /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x00000005 /* EMC_TXSR */ + 0x00000005 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000005 /* EMC_TCKESR */ + 0x00000004 /* EMC_TPD */ + 0x00000000 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000005 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x00000064 /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x106aa298 /* EMC_FBIO_CFG5 */ + 0x002c00a0 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x00064000 /* EMC_DLL_XFORM_DQS0 */ + 0x00064000 /* EMC_DLL_XFORM_DQS1 */ + 0x00064000 /* EMC_DLL_XFORM_DQS2 */ + 0x00064000 /* EMC_DLL_XFORM_DQS3 */ + 0x00064000 /* EMC_DLL_XFORM_DQS4 */ + 0x00064000 /* EMC_DLL_XFORM_DQS5 */ + 0x00064000 /* EMC_DLL_XFORM_DQS6 */ + 0x00064000 /* EMC_DLL_XFORM_DQS7 */ + 0x00064000 /* EMC_DLL_XFORM_DQS8 */ + 0x00064000 /* EMC_DLL_XFORM_DQS9 */ + 0x00064000 /* EMC_DLL_XFORM_DQS10 */ + 0x00064000 /* EMC_DLL_XFORM_DQS11 */ + 0x00064000 /* EMC_DLL_XFORM_DQS12 */ + 0x00064000 /* EMC_DLL_XFORM_DQS13 */ + 0x00064000 /* EMC_DLL_XFORM_DQS14 */ + 0x00064000 /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR0 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR1 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR3 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR4 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS15 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ0 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ1 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ2 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ3 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ4 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ5 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ6 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ7 */ + 0x10000280 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc081 /* EMC_XM2CLKPADCTRL */ + 0x00000303 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x0000003f /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x51451400 /* EMC_XM2DQSPADCTRL3 */ + 0x00514514 /* EMC_XM2DQSPADCTRL4 */ + 0x00514514 /* EMC_XM2DQSPADCTRL5 */ + 0x51451400 /* EMC_XM2DQSPADCTRL6 */ + 0x0000003f /* EMC_DSR_VTTGEN_DRV */ + 0x00000007 /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000042 /* EMC_ZCAL_WAIT_CNT */ + 0x000c000c /* EMC_MRS_WAIT_CNT2 */ + 0x00000000 /* EMC_CTT */ + 0x00000003 /* EMC_CTT_DURATION */ + 0x0000f2f3 /* EMC_CFG_PIPE */ + 0x800001c5 /* EMC_DYN_SELF_REF_CONTROL */ + 0x0000000a /* EMC_QPOP */ + >; + }; + + timing-20400000 { + clock-frequency = <20400000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000008>; + nvidia,emc-cfg = <0x73240000>; + nvidia,emc-cfg-2 = <0x000008c5>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-mrs-wait-cnt = <0x000c000c>; + nvidia,emc-sel-dpd-ctrl = <0x00040128>; + nvidia,emc-xm2dqspadctrl2 = <0x0130b118>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00000000>; + + nvidia,emc-configuration = < + 0x00000000 /* EMC_RC */ + 0x00000005 /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x00000000 /* EMC_RAS */ + 0x00000000 /* EMC_RP */ + 0x00000004 /* EMC_R2W */ + 0x0000000a /* EMC_W2R */ + 0x00000003 /* EMC_R2P */ + 0x0000000b /* EMC_W2P */ + 0x00000000 /* EMC_RD_RCD */ + 0x00000000 /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000003 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000006 /* EMC_WDV */ + 0x00000006 /* EMC_WDV_MASK */ + 0x00000006 /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000005 /* EMC_EINPUT */ + 0x00000005 /* EMC_EINPUT_DURATION */ + 0x00010000 /* EMC_PUTERM_EXTRA */ + 0x00000003 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000004 /* EMC_QRST */ + 0x0000000c /* EMC_QSAFE */ + 0x0000000d /* EMC_RDV */ + 0x0000000f /* EMC_RDV_MASK */ + 0x0000009a /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x00000026 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x00000002 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000007 /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x00000006 /* EMC_TXSR */ + 0x00000006 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000005 /* EMC_TCKESR */ + 0x00000004 /* EMC_TPD */ + 0x00000000 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000005 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x000000a0 /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x106aa298 /* EMC_FBIO_CFG5 */ + 0x002c00a0 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x00064000 /* EMC_DLL_XFORM_DQS0 */ + 0x00064000 /* EMC_DLL_XFORM_DQS1 */ + 0x00064000 /* EMC_DLL_XFORM_DQS2 */ + 0x00064000 /* EMC_DLL_XFORM_DQS3 */ + 0x00064000 /* EMC_DLL_XFORM_DQS4 */ + 0x00064000 /* EMC_DLL_XFORM_DQS5 */ + 0x00064000 /* EMC_DLL_XFORM_DQS6 */ + 0x00064000 /* EMC_DLL_XFORM_DQS7 */ + 0x00064000 /* EMC_DLL_XFORM_DQS8 */ + 0x00064000 /* EMC_DLL_XFORM_DQS9 */ + 0x00064000 /* EMC_DLL_XFORM_DQS10 */ + 0x00064000 /* EMC_DLL_XFORM_DQS11 */ + 0x00064000 /* EMC_DLL_XFORM_DQS12 */ + 0x00064000 /* EMC_DLL_XFORM_DQS13 */ + 0x00064000 /* EMC_DLL_XFORM_DQS14 */ + 0x00064000 /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR0 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR1 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR3 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR4 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS15 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ0 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ1 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ2 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ3 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ4 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ5 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ6 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ7 */ + 0x10000280 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc081 /* EMC_XM2CLKPADCTRL */ + 0x00000303 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x0000003f /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x51451400 /* EMC_XM2DQSPADCTRL3 */ + 0x00514514 /* EMC_XM2DQSPADCTRL4 */ + 0x00514514 /* EMC_XM2DQSPADCTRL5 */ + 0x51451400 /* EMC_XM2DQSPADCTRL6 */ + 0x0000003f /* EMC_DSR_VTTGEN_DRV */ + 0x0000000b /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000042 /* EMC_ZCAL_WAIT_CNT */ + 0x000c000c /* EMC_MRS_WAIT_CNT2 */ + 0x00000000 /* EMC_CTT */ + 0x00000003 /* EMC_CTT_DURATION */ + 0x0000f2f3 /* EMC_CFG_PIPE */ + 0x8000023a /* EMC_DYN_SELF_REF_CONTROL */ + 0x0000000a /* EMC_QPOP */ + >; + }; + + timing-40800000 { + clock-frequency = <40800000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000008>; + nvidia,emc-cfg = <0x73240000>; + nvidia,emc-cfg-2 = <0x000008c5>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-mrs-wait-cnt = <0x000c000c>; + nvidia,emc-sel-dpd-ctrl = <0x00040128>; + nvidia,emc-xm2dqspadctrl2 = <0x0130b118>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00000000>; + + nvidia,emc-configuration = < + 0x00000001 /* EMC_RC */ + 0x0000000a /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x00000001 /* EMC_RAS */ + 0x00000000 /* EMC_RP */ + 0x00000004 /* EMC_R2W */ + 0x0000000a /* EMC_W2R */ + 0x00000003 /* EMC_R2P */ + 0x0000000b /* EMC_W2P */ + 0x00000000 /* EMC_RD_RCD */ + 0x00000000 /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000003 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000006 /* EMC_WDV */ + 0x00000006 /* EMC_WDV_MASK */ + 0x00000006 /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000005 /* EMC_EINPUT */ + 0x00000005 /* EMC_EINPUT_DURATION */ + 0x00010000 /* EMC_PUTERM_EXTRA */ + 0x00000003 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000004 /* EMC_QRST */ + 0x0000000c /* EMC_QSAFE */ + 0x0000000d /* EMC_RDV */ + 0x0000000f /* EMC_RDV_MASK */ + 0x00000134 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x0000004d /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x00000002 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000008 /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x0000000c /* EMC_TXSR */ + 0x0000000c /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000005 /* EMC_TCKESR */ + 0x00000004 /* EMC_TPD */ + 0x00000000 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000005 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x0000013f /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x106aa298 /* EMC_FBIO_CFG5 */ + 0x002c00a0 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x00064000 /* EMC_DLL_XFORM_DQS0 */ + 0x00064000 /* EMC_DLL_XFORM_DQS1 */ + 0x00064000 /* EMC_DLL_XFORM_DQS2 */ + 0x00064000 /* EMC_DLL_XFORM_DQS3 */ + 0x00064000 /* EMC_DLL_XFORM_DQS4 */ + 0x00064000 /* EMC_DLL_XFORM_DQS5 */ + 0x00064000 /* EMC_DLL_XFORM_DQS6 */ + 0x00064000 /* EMC_DLL_XFORM_DQS7 */ + 0x00064000 /* EMC_DLL_XFORM_DQS8 */ + 0x00064000 /* EMC_DLL_XFORM_DQS9 */ + 0x00064000 /* EMC_DLL_XFORM_DQS10 */ + 0x00064000 /* EMC_DLL_XFORM_DQS11 */ + 0x00064000 /* EMC_DLL_XFORM_DQS12 */ + 0x00064000 /* EMC_DLL_XFORM_DQS13 */ + 0x00064000 /* EMC_DLL_XFORM_DQS14 */ + 0x00064000 /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR0 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR1 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR3 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR4 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS15 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ0 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ1 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ2 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ3 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ4 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ5 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ6 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ7 */ + 0x10000280 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc081 /* EMC_XM2CLKPADCTRL */ + 0x00000303 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x0000003f /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x51451400 /* EMC_XM2DQSPADCTRL3 */ + 0x00514514 /* EMC_XM2DQSPADCTRL4 */ + 0x00514514 /* EMC_XM2DQSPADCTRL5 */ + 0x51451400 /* EMC_XM2DQSPADCTRL6 */ + 0x0000003f /* EMC_DSR_VTTGEN_DRV */ + 0x00000015 /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000042 /* EMC_ZCAL_WAIT_CNT */ + 0x000c000c /* EMC_MRS_WAIT_CNT2 */ + 0x00000000 /* EMC_CTT */ + 0x00000003 /* EMC_CTT_DURATION */ + 0x0000f2f3 /* EMC_CFG_PIPE */ + 0x80000370 /* EMC_DYN_SELF_REF_CONTROL */ + 0x0000000a /* EMC_QPOP */ + >; + }; + + timing-68000000 { + clock-frequency = <68000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000008>; + nvidia,emc-cfg = <0x73240000>; + nvidia,emc-cfg-2 = <0x000008c5>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-mrs-wait-cnt = <0x000c000c>; + nvidia,emc-sel-dpd-ctrl = <0x00040128>; + nvidia,emc-xm2dqspadctrl2 = <0x0130b118>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00000000>; + + nvidia,emc-configuration = < + 0x00000003 /* EMC_RC */ + 0x00000011 /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x00000002 /* EMC_RAS */ + 0x00000000 /* EMC_RP */ + 0x00000004 /* EMC_R2W */ + 0x0000000a /* EMC_W2R */ + 0x00000003 /* EMC_R2P */ + 0x0000000b /* EMC_W2P */ + 0x00000000 /* EMC_RD_RCD */ + 0x00000000 /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000003 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000006 /* EMC_WDV */ + 0x00000006 /* EMC_WDV_MASK */ + 0x00000006 /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000005 /* EMC_EINPUT */ + 0x00000005 /* EMC_EINPUT_DURATION */ + 0x00010000 /* EMC_PUTERM_EXTRA */ + 0x00000003 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000004 /* EMC_QRST */ + 0x0000000c /* EMC_QSAFE */ + 0x0000000d /* EMC_RDV */ + 0x0000000f /* EMC_RDV_MASK */ + 0x00000202 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x00000080 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x00000002 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x0000000f /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x00000013 /* EMC_TXSR */ + 0x00000013 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000005 /* EMC_TCKESR */ + 0x00000004 /* EMC_TPD */ + 0x00000001 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000005 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x00000213 /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x106aa298 /* EMC_FBIO_CFG5 */ + 0x002c00a0 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x00064000 /* EMC_DLL_XFORM_DQS0 */ + 0x00064000 /* EMC_DLL_XFORM_DQS1 */ + 0x00064000 /* EMC_DLL_XFORM_DQS2 */ + 0x00064000 /* EMC_DLL_XFORM_DQS3 */ + 0x00064000 /* EMC_DLL_XFORM_DQS4 */ + 0x00064000 /* EMC_DLL_XFORM_DQS5 */ + 0x00064000 /* EMC_DLL_XFORM_DQS6 */ + 0x00064000 /* EMC_DLL_XFORM_DQS7 */ + 0x00064000 /* EMC_DLL_XFORM_DQS8 */ + 0x00064000 /* EMC_DLL_XFORM_DQS9 */ + 0x00064000 /* EMC_DLL_XFORM_DQS10 */ + 0x00064000 /* EMC_DLL_XFORM_DQS11 */ + 0x00064000 /* EMC_DLL_XFORM_DQS12 */ + 0x00064000 /* EMC_DLL_XFORM_DQS13 */ + 0x00064000 /* EMC_DLL_XFORM_DQS14 */ + 0x00064000 /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR0 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR1 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR3 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR4 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS15 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ0 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ1 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ2 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ3 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ4 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ5 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ6 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ7 */ + 0x10000280 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc081 /* EMC_XM2CLKPADCTRL */ + 0x00000303 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x0000003f /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x51451400 /* EMC_XM2DQSPADCTRL3 */ + 0x00514514 /* EMC_XM2DQSPADCTRL4 */ + 0x00514514 /* EMC_XM2DQSPADCTRL5 */ + 0x51451400 /* EMC_XM2DQSPADCTRL6 */ + 0x0000003f /* EMC_DSR_VTTGEN_DRV */ + 0x00000022 /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000042 /* EMC_ZCAL_WAIT_CNT */ + 0x000c000c /* EMC_MRS_WAIT_CNT2 */ + 0x00000000 /* EMC_CTT */ + 0x00000003 /* EMC_CTT_DURATION */ + 0x0000f2f3 /* EMC_CFG_PIPE */ + 0x8000050e /* EMC_DYN_SELF_REF_CONTROL */ + 0x0000000a /* EMC_QPOP */ + >; + }; + + timing-102000000 { + clock-frequency = <102000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000008>; + nvidia,emc-cfg = <0x73240000>; + nvidia,emc-cfg-2 = <0x000008c5>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-mrs-wait-cnt = <0x000c000c>; + nvidia,emc-sel-dpd-ctrl = <0x00040128>; + nvidia,emc-xm2dqspadctrl2 = <0x0130b118>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00000000>; + + nvidia,emc-configuration = < + 0x00000004 /* EMC_RC */ + 0x0000001a /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x00000003 /* EMC_RAS */ + 0x00000001 /* EMC_RP */ + 0x00000004 /* EMC_R2W */ + 0x0000000a /* EMC_W2R */ + 0x00000003 /* EMC_R2P */ + 0x0000000b /* EMC_W2P */ + 0x00000001 /* EMC_RD_RCD */ + 0x00000001 /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000003 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000006 /* EMC_WDV */ + 0x00000006 /* EMC_WDV_MASK */ + 0x00000006 /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000005 /* EMC_EINPUT */ + 0x00000005 /* EMC_EINPUT_DURATION */ + 0x00010000 /* EMC_PUTERM_EXTRA */ + 0x00000003 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000004 /* EMC_QRST */ + 0x0000000c /* EMC_QSAFE */ + 0x0000000d /* EMC_RDV */ + 0x0000000f /* EMC_RDV_MASK */ + 0x00000304 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x000000c1 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x00000002 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000018 /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x0000001c /* EMC_TXSR */ + 0x0000001c /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000005 /* EMC_TCKESR */ + 0x00000004 /* EMC_TPD */ + 0x00000003 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000005 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x0000031c /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x106aa298 /* EMC_FBIO_CFG5 */ + 0x002c00a0 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x00064000 /* EMC_DLL_XFORM_DQS0 */ + 0x00064000 /* EMC_DLL_XFORM_DQS1 */ + 0x00064000 /* EMC_DLL_XFORM_DQS2 */ + 0x00064000 /* EMC_DLL_XFORM_DQS3 */ + 0x00064000 /* EMC_DLL_XFORM_DQS4 */ + 0x00064000 /* EMC_DLL_XFORM_DQS5 */ + 0x00064000 /* EMC_DLL_XFORM_DQS6 */ + 0x00064000 /* EMC_DLL_XFORM_DQS7 */ + 0x00064000 /* EMC_DLL_XFORM_DQS8 */ + 0x00064000 /* EMC_DLL_XFORM_DQS9 */ + 0x00064000 /* EMC_DLL_XFORM_DQS10 */ + 0x00064000 /* EMC_DLL_XFORM_DQS11 */ + 0x00064000 /* EMC_DLL_XFORM_DQS12 */ + 0x00064000 /* EMC_DLL_XFORM_DQS13 */ + 0x00064000 /* EMC_DLL_XFORM_DQS14 */ + 0x00064000 /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR0 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR1 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR3 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR4 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS15 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ0 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ1 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ2 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ3 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ4 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ5 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ6 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ7 */ + 0x10000280 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc081 /* EMC_XM2CLKPADCTRL */ + 0x00000303 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x0000003f /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x51451400 /* EMC_XM2DQSPADCTRL3 */ + 0x00514514 /* EMC_XM2DQSPADCTRL4 */ + 0x00514514 /* EMC_XM2DQSPADCTRL5 */ + 0x51451400 /* EMC_XM2DQSPADCTRL6 */ + 0x0000003f /* EMC_DSR_VTTGEN_DRV */ + 0x00000033 /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000042 /* EMC_ZCAL_WAIT_CNT */ + 0x000c000c /* EMC_MRS_WAIT_CNT2 */ + 0x00000000 /* EMC_CTT */ + 0x00000003 /* EMC_CTT_DURATION */ + 0x0000f2f3 /* EMC_CFG_PIPE */ + 0x80000713 /* EMC_DYN_SELF_REF_CONTROL */ + 0x0000000a /* EMC_QPOP */ + >; + }; + + timing-204000000 { + clock-frequency = <204000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000008>; + nvidia,emc-cfg = <0x73240000>; + nvidia,emc-cfg-2 = <0x0000088d>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-mrs-wait-cnt = <0x000c000c>; + nvidia,emc-sel-dpd-ctrl = <0x00040008>; + nvidia,emc-xm2dqspadctrl2 = <0x0130b118>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00020000>; + + nvidia,emc-configuration = < + 0x00000009 /* EMC_RC */ + 0x00000035 /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x00000007 /* EMC_RAS */ + 0x00000002 /* EMC_RP */ + 0x00000005 /* EMC_R2W */ + 0x0000000a /* EMC_W2R */ + 0x00000003 /* EMC_R2P */ + 0x0000000b /* EMC_W2P */ + 0x00000002 /* EMC_RD_RCD */ + 0x00000002 /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000003 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000005 /* EMC_WDV */ + 0x00000005 /* EMC_WDV_MASK */ + 0x00000006 /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000004 /* EMC_EINPUT */ + 0x00000006 /* EMC_EINPUT_DURATION */ + 0x00010000 /* EMC_PUTERM_EXTRA */ + 0x00000003 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000003 /* EMC_QRST */ + 0x0000000d /* EMC_QSAFE */ + 0x0000000f /* EMC_RDV */ + 0x00000011 /* EMC_RDV_MASK */ + 0x00000607 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x00000181 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x00000002 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000032 /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x00000038 /* EMC_TXSR */ + 0x00000038 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000005 /* EMC_TCKESR */ + 0x00000004 /* EMC_TPD */ + 0x00000007 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000005 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x00000638 /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x106aa298 /* EMC_FBIO_CFG5 */ + 0x002c00a0 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x00064000 /* EMC_DLL_XFORM_DQS0 */ + 0x00064000 /* EMC_DLL_XFORM_DQS1 */ + 0x00064000 /* EMC_DLL_XFORM_DQS2 */ + 0x00064000 /* EMC_DLL_XFORM_DQS3 */ + 0x00064000 /* EMC_DLL_XFORM_DQS4 */ + 0x00064000 /* EMC_DLL_XFORM_DQS5 */ + 0x00064000 /* EMC_DLL_XFORM_DQS6 */ + 0x00064000 /* EMC_DLL_XFORM_DQS7 */ + 0x00064000 /* EMC_DLL_XFORM_DQS8 */ + 0x00064000 /* EMC_DLL_XFORM_DQS9 */ + 0x00064000 /* EMC_DLL_XFORM_DQS10 */ + 0x00064000 /* EMC_DLL_XFORM_DQS11 */ + 0x00064000 /* EMC_DLL_XFORM_DQS12 */ + 0x00064000 /* EMC_DLL_XFORM_DQS13 */ + 0x00064000 /* EMC_DLL_XFORM_DQS14 */ + 0x00064000 /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR0 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR1 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR3 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR4 */ + 0x00004000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS15 */ + 0x00090000 /* EMC_DLL_XFORM_DQ0 */ + 0x00090000 /* EMC_DLL_XFORM_DQ1 */ + 0x00094000 /* EMC_DLL_XFORM_DQ2 */ + 0x00094000 /* EMC_DLL_XFORM_DQ3 */ + 0x00009400 /* EMC_DLL_XFORM_DQ4 */ + 0x00009000 /* EMC_DLL_XFORM_DQ5 */ + 0x00009000 /* EMC_DLL_XFORM_DQ6 */ + 0x00009000 /* EMC_DLL_XFORM_DQ7 */ + 0x10000280 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc081 /* EMC_XM2CLKPADCTRL */ + 0x00000303 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x0000003f /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x51451400 /* EMC_XM2DQSPADCTRL3 */ + 0x00514514 /* EMC_XM2DQSPADCTRL4 */ + 0x00514514 /* EMC_XM2DQSPADCTRL5 */ + 0x51451400 /* EMC_XM2DQSPADCTRL6 */ + 0x0000003f /* EMC_DSR_VTTGEN_DRV */ + 0x00000066 /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000100 /* EMC_ZCAL_WAIT_CNT */ + 0x000c000c /* EMC_MRS_WAIT_CNT2 */ + 0x00000000 /* EMC_CTT */ + 0x00000003 /* EMC_CTT_DURATION */ + 0x0000d2b3 /* EMC_CFG_PIPE */ + 0x80000d22 /* EMC_DYN_SELF_REF_CONTROL */ + 0x0000000a /* EMC_QPOP */ + >; + }; + + timing-300000000 { + clock-frequency = <300000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000000>; + nvidia,emc-cfg = <0x73340000>; + nvidia,emc-cfg-2 = <0x000008d5>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100002>; + nvidia,emc-mode-2 = <0x80200000>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80000321>; + nvidia,emc-mrs-wait-cnt = <0x0174000c>; + nvidia,emc-sel-dpd-ctrl = <0x00040128>; + nvidia,emc-xm2dqspadctrl2 = <0x01231339>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00020000>; + + nvidia,emc-configuration = < + 0x0000000d /* EMC_RC */ + 0x0000004c /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x00000009 /* EMC_RAS */ + 0x00000003 /* EMC_RP */ + 0x00000004 /* EMC_R2W */ + 0x00000008 /* EMC_W2R */ + 0x00000002 /* EMC_R2P */ + 0x00000009 /* EMC_W2P */ + 0x00000003 /* EMC_RD_RCD */ + 0x00000003 /* EMC_WR_RCD */ + 0x00000002 /* EMC_RRD */ + 0x00000002 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000003 /* EMC_WDV */ + 0x00000003 /* EMC_WDV_MASK */ + 0x00000005 /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000002 /* EMC_EINPUT */ + 0x00000007 /* EMC_EINPUT_DURATION */ + 0x00020000 /* EMC_PUTERM_EXTRA */ + 0x00000003 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000001 /* EMC_QRST */ + 0x0000000e /* EMC_QSAFE */ + 0x00000010 /* EMC_RDV */ + 0x00000012 /* EMC_RDV_MASK */ + 0x000008e4 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x00000239 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000001 /* EMC_PDEX2WR */ + 0x00000008 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x0000004a /* EMC_AR2PDEN */ + 0x0000000e /* EMC_RW2PDEN */ + 0x00000051 /* EMC_TXSR */ + 0x00000200 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000005 /* EMC_TCKESR */ + 0x00000004 /* EMC_TPD */ + 0x00000009 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000005 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x00000924 /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x104ab098 /* EMC_FBIO_CFG5 */ + 0x002c00a0 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x00030000 /* EMC_DLL_XFORM_DQS0 */ + 0x00030000 /* EMC_DLL_XFORM_DQS1 */ + 0x00030000 /* EMC_DLL_XFORM_DQS2 */ + 0x00030000 /* EMC_DLL_XFORM_DQS3 */ + 0x00030000 /* EMC_DLL_XFORM_DQS4 */ + 0x00030000 /* EMC_DLL_XFORM_DQS5 */ + 0x00030000 /* EMC_DLL_XFORM_DQS6 */ + 0x00030000 /* EMC_DLL_XFORM_DQS7 */ + 0x00030000 /* EMC_DLL_XFORM_DQS8 */ + 0x00030000 /* EMC_DLL_XFORM_DQS9 */ + 0x00030000 /* EMC_DLL_XFORM_DQS10 */ + 0x00030000 /* EMC_DLL_XFORM_DQS11 */ + 0x00030000 /* EMC_DLL_XFORM_DQS12 */ + 0x00030000 /* EMC_DLL_XFORM_DQS13 */ + 0x00030000 /* EMC_DLL_XFORM_DQS14 */ + 0x00030000 /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00098000 /* EMC_DLL_XFORM_ADDR0 */ + 0x00098000 /* EMC_DLL_XFORM_ADDR1 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00098000 /* EMC_DLL_XFORM_ADDR3 */ + 0x00098000 /* EMC_DLL_XFORM_ADDR4 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS15 */ + 0x00060000 /* EMC_DLL_XFORM_DQ0 */ + 0x00060000 /* EMC_DLL_XFORM_DQ1 */ + 0x00060000 /* EMC_DLL_XFORM_DQ2 */ + 0x00060000 /* EMC_DLL_XFORM_DQ3 */ + 0x00006000 /* EMC_DLL_XFORM_DQ4 */ + 0x00006000 /* EMC_DLL_XFORM_DQ5 */ + 0x00006000 /* EMC_DLL_XFORM_DQ6 */ + 0x00006000 /* EMC_DLL_XFORM_DQ7 */ + 0x10000280 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc081 /* EMC_XM2CLKPADCTRL */ + 0x00000101 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x00000000 /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x51451420 /* EMC_XM2DQSPADCTRL3 */ + 0x00514514 /* EMC_XM2DQSPADCTRL4 */ + 0x00514514 /* EMC_XM2DQSPADCTRL5 */ + 0x51451400 /* EMC_XM2DQSPADCTRL6 */ + 0x0000003f /* EMC_DSR_VTTGEN_DRV */ + 0x00000096 /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000100 /* EMC_ZCAL_WAIT_CNT */ + 0x0174000c /* EMC_MRS_WAIT_CNT2 */ + 0x00000000 /* EMC_CTT */ + 0x00000003 /* EMC_CTT_DURATION */ + 0x000052a3 /* EMC_CFG_PIPE */ + 0x800012d7 /* EMC_DYN_SELF_REF_CONTROL */ + 0x00000009 /* EMC_QPOP */ + >; + }; + + timing-396000000 { + clock-frequency = <396000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000000>; + nvidia,emc-cfg = <0x73340000>; + nvidia,emc-cfg-2 = <0x00000895>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100002>; + nvidia,emc-mode-2 = <0x80200000>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80000521>; + nvidia,emc-mrs-wait-cnt = <0x015b000c>; + nvidia,emc-sel-dpd-ctrl = <0x00040008>; + nvidia,emc-xm2dqspadctrl2 = <0x01231339>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00020000>; + + nvidia,emc-configuration = < + 0x00000012 /* EMC_RC */ + 0x00000065 /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x0000000c /* EMC_RAS */ + 0x00000004 /* EMC_RP */ + 0x00000005 /* EMC_R2W */ + 0x00000008 /* EMC_W2R */ + 0x00000002 /* EMC_R2P */ + 0x0000000a /* EMC_W2P */ + 0x00000004 /* EMC_RD_RCD */ + 0x00000004 /* EMC_WR_RCD */ + 0x00000002 /* EMC_RRD */ + 0x00000002 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000003 /* EMC_WDV */ + 0x00000003 /* EMC_WDV_MASK */ + 0x00000005 /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000001 /* EMC_EINPUT */ + 0x00000008 /* EMC_EINPUT_DURATION */ + 0x00020000 /* EMC_PUTERM_EXTRA */ + 0x00000003 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000000 /* EMC_QRST */ + 0x0000000f /* EMC_QSAFE */ + 0x00000010 /* EMC_RDV */ + 0x00000012 /* EMC_RDV_MASK */ + 0x00000bd1 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x000002f4 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000001 /* EMC_PDEX2WR */ + 0x00000008 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000063 /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x0000006b /* EMC_TXSR */ + 0x00000200 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000005 /* EMC_TCKESR */ + 0x00000004 /* EMC_TPD */ + 0x0000000d /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000005 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x00000c11 /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x104ab098 /* EMC_FBIO_CFG5 */ + 0x002c00a0 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x00030000 /* EMC_DLL_XFORM_DQS0 */ + 0x00030000 /* EMC_DLL_XFORM_DQS1 */ + 0x00030000 /* EMC_DLL_XFORM_DQS2 */ + 0x00030000 /* EMC_DLL_XFORM_DQS3 */ + 0x00030000 /* EMC_DLL_XFORM_DQS4 */ + 0x00030000 /* EMC_DLL_XFORM_DQS5 */ + 0x00030000 /* EMC_DLL_XFORM_DQS6 */ + 0x00030000 /* EMC_DLL_XFORM_DQS7 */ + 0x00030000 /* EMC_DLL_XFORM_DQS8 */ + 0x00030000 /* EMC_DLL_XFORM_DQS9 */ + 0x00030000 /* EMC_DLL_XFORM_DQS10 */ + 0x00030000 /* EMC_DLL_XFORM_DQS11 */ + 0x00030000 /* EMC_DLL_XFORM_DQS12 */ + 0x00030000 /* EMC_DLL_XFORM_DQS13 */ + 0x00030000 /* EMC_DLL_XFORM_DQS14 */ + 0x00030000 /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00070000 /* EMC_DLL_XFORM_ADDR0 */ + 0x00070000 /* EMC_DLL_XFORM_ADDR1 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00070000 /* EMC_DLL_XFORM_ADDR3 */ + 0x00070000 /* EMC_DLL_XFORM_ADDR4 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS15 */ + 0x00048000 /* EMC_DLL_XFORM_DQ0 */ + 0x00048000 /* EMC_DLL_XFORM_DQ1 */ + 0x00048000 /* EMC_DLL_XFORM_DQ2 */ + 0x00048000 /* EMC_DLL_XFORM_DQ3 */ + 0x00004800 /* EMC_DLL_XFORM_DQ4 */ + 0x00004800 /* EMC_DLL_XFORM_DQ5 */ + 0x00004800 /* EMC_DLL_XFORM_DQ6 */ + 0x00004800 /* EMC_DLL_XFORM_DQ7 */ + 0x10000280 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc081 /* EMC_XM2CLKPADCTRL */ + 0x00000101 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x00000000 /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x51451420 /* EMC_XM2DQSPADCTRL3 */ + 0x00514514 /* EMC_XM2DQSPADCTRL4 */ + 0x00514514 /* EMC_XM2DQSPADCTRL5 */ + 0x51451400 /* EMC_XM2DQSPADCTRL6 */ + 0x0000003f /* EMC_DSR_VTTGEN_DRV */ + 0x000000c6 /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000100 /* EMC_ZCAL_WAIT_CNT */ + 0x015b000c /* EMC_MRS_WAIT_CNT2 */ + 0x00000000 /* EMC_CTT */ + 0x00000003 /* EMC_CTT_DURATION */ + 0x000052a3 /* EMC_CFG_PIPE */ + 0x8000188b /* EMC_DYN_SELF_REF_CONTROL */ + 0x00000009 /* EMC_QPOP */ + >; + }; + + timing-528000000 { + clock-frequency = <528000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000000>; + nvidia,emc-cfg = <0x73300000>; + nvidia,emc-cfg-2 = <0x0000089d>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100002>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80000941>; + nvidia,emc-mrs-wait-cnt = <0x013a000c>; + nvidia,emc-sel-dpd-ctrl = <0x00040008>; + nvidia,emc-xm2dqspadctrl2 = <0x0123133d>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00020000>; + + nvidia,emc-configuration = < + 0x00000018 /* EMC_RC */ + 0x00000088 /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x00000011 /* EMC_RAS */ + 0x00000006 /* EMC_RP */ + 0x00000006 /* EMC_R2W */ + 0x00000009 /* EMC_W2R */ + 0x00000002 /* EMC_R2P */ + 0x0000000d /* EMC_W2P */ + 0x00000006 /* EMC_RD_RCD */ + 0x00000006 /* EMC_WR_RCD */ + 0x00000002 /* EMC_RRD */ + 0x00000002 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000003 /* EMC_WDV */ + 0x00000003 /* EMC_WDV_MASK */ + 0x00000007 /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000002 /* EMC_EINPUT */ + 0x00000009 /* EMC_EINPUT_DURATION */ + 0x00040000 /* EMC_PUTERM_EXTRA */ + 0x00000003 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000001 /* EMC_QRST */ + 0x00000010 /* EMC_QSAFE */ + 0x00000013 /* EMC_RDV */ + 0x00000015 /* EMC_RDV_MASK */ + 0x00000fd6 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x000003f5 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x0000000b /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000084 /* EMC_AR2PDEN */ + 0x00000012 /* EMC_RW2PDEN */ + 0x0000008f /* EMC_TXSR */ + 0x00000200 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000005 /* EMC_TCKESR */ + 0x00000004 /* EMC_TPD */ + 0x00000013 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000006 /* EMC_TCLKSTABLE */ + 0x00000006 /* EMC_TCLKSTOP */ + 0x00001017 /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x104ab098 /* EMC_FBIO_CFG5 */ + 0xe01200b1 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x0000000a /* EMC_DLL_XFORM_DQS0 */ + 0x0000000a /* EMC_DLL_XFORM_DQS1 */ + 0x0000000a /* EMC_DLL_XFORM_DQS2 */ + 0x0000000a /* EMC_DLL_XFORM_DQS3 */ + 0x0000000a /* EMC_DLL_XFORM_DQS4 */ + 0x0000000a /* EMC_DLL_XFORM_DQS5 */ + 0x0000000a /* EMC_DLL_XFORM_DQS6 */ + 0x0000000a /* EMC_DLL_XFORM_DQS7 */ + 0x0000000a /* EMC_DLL_XFORM_DQS8 */ + 0x0000000a /* EMC_DLL_XFORM_DQS9 */ + 0x0000000a /* EMC_DLL_XFORM_DQS10 */ + 0x0000000a /* EMC_DLL_XFORM_DQS11 */ + 0x0000000a /* EMC_DLL_XFORM_DQS12 */ + 0x0000000a /* EMC_DLL_XFORM_DQS13 */ + 0x0000000a /* EMC_DLL_XFORM_DQS14 */ + 0x0000000a /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00050000 /* EMC_DLL_XFORM_ADDR0 */ + 0x00050000 /* EMC_DLL_XFORM_ADDR1 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00050000 /* EMC_DLL_XFORM_ADDR3 */ + 0x00050000 /* EMC_DLL_XFORM_ADDR4 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000002 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000002 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000003 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000004 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000001 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000004 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000003 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000002 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000002 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000003 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000004 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000001 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000004 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000003 /* EMC_DLI_TRIM_TXDQS15 */ + 0x0000000e /* EMC_DLL_XFORM_DQ0 */ + 0x0000000e /* EMC_DLL_XFORM_DQ1 */ + 0x0000000e /* EMC_DLL_XFORM_DQ2 */ + 0x0000000e /* EMC_DLL_XFORM_DQ3 */ + 0x0000000e /* EMC_DLL_XFORM_DQ4 */ + 0x0000000e /* EMC_DLL_XFORM_DQ5 */ + 0x0000000e /* EMC_DLL_XFORM_DQ6 */ + 0x0000000e /* EMC_DLL_XFORM_DQ7 */ + 0x100002a0 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc085 /* EMC_XM2CLKPADCTRL */ + 0x00000101 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x00000000 /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x51451420 /* EMC_XM2DQSPADCTRL3 */ + 0x00514514 /* EMC_XM2DQSPADCTRL4 */ + 0x00514514 /* EMC_XM2DQSPADCTRL5 */ + 0x51451400 /* EMC_XM2DQSPADCTRL6 */ + 0x0606003f /* EMC_DSR_VTTGEN_DRV */ + 0x00000000 /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000100 /* EMC_ZCAL_WAIT_CNT */ + 0x013a000c /* EMC_MRS_WAIT_CNT2 */ + 0x00000000 /* EMC_CTT */ + 0x00000003 /* EMC_CTT_DURATION */ + 0x000042a0 /* EMC_CFG_PIPE */ + 0x80002062 /* EMC_DYN_SELF_REF_CONTROL */ + 0x0000000b /* EMC_QPOP */ + >; + }; + + timing-600000000 { + clock-frequency = <600000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000000>; + nvidia,emc-cfg = <0x73300000>; + nvidia,emc-cfg-2 = <0x0000089d>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100002>; + nvidia,emc-mode-2 = <0x80200010>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80000b61>; + nvidia,emc-mrs-wait-cnt = <0x0128000c>; + nvidia,emc-sel-dpd-ctrl = <0x00040008>; + nvidia,emc-xm2dqspadctrl2 = <0x0121113d>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00020000>; + + nvidia,emc-configuration = < + 0x0000001c /* EMC_RC */ + 0x0000009a /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x00000013 /* EMC_RAS */ + 0x00000007 /* EMC_RP */ + 0x00000007 /* EMC_R2W */ + 0x0000000b /* EMC_W2R */ + 0x00000003 /* EMC_R2P */ + 0x00000010 /* EMC_W2P */ + 0x00000007 /* EMC_RD_RCD */ + 0x00000007 /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000002 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000005 /* EMC_WDV */ + 0x00000005 /* EMC_WDV_MASK */ + 0x0000000a /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000003 /* EMC_EINPUT */ + 0x0000000b /* EMC_EINPUT_DURATION */ + 0x00070000 /* EMC_PUTERM_EXTRA */ + 0x00000003 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000002 /* EMC_QRST */ + 0x00000012 /* EMC_QSAFE */ + 0x00000016 /* EMC_RDV */ + 0x00000018 /* EMC_RDV_MASK */ + 0x00001208 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x00000482 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x0000000d /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000096 /* EMC_AR2PDEN */ + 0x00000015 /* EMC_RW2PDEN */ + 0x000000a2 /* EMC_TXSR */ + 0x00000200 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000005 /* EMC_TCKESR */ + 0x00000004 /* EMC_TPD */ + 0x00000015 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000006 /* EMC_TCLKSTABLE */ + 0x00000006 /* EMC_TCLKSTOP */ + 0x00001249 /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x104ab098 /* EMC_FBIO_CFG5 */ + 0xe00e00b1 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x0000000a /* EMC_DLL_XFORM_DQS0 */ + 0x0000000a /* EMC_DLL_XFORM_DQS1 */ + 0x0000000a /* EMC_DLL_XFORM_DQS2 */ + 0x0000000a /* EMC_DLL_XFORM_DQS3 */ + 0x0000000a /* EMC_DLL_XFORM_DQS4 */ + 0x0000000a /* EMC_DLL_XFORM_DQS5 */ + 0x0000000a /* EMC_DLL_XFORM_DQS6 */ + 0x0000000a /* EMC_DLL_XFORM_DQS7 */ + 0x0000000a /* EMC_DLL_XFORM_DQS8 */ + 0x0000000a /* EMC_DLL_XFORM_DQS9 */ + 0x0000000a /* EMC_DLL_XFORM_DQS10 */ + 0x0000000a /* EMC_DLL_XFORM_DQS11 */ + 0x0000000a /* EMC_DLL_XFORM_DQS12 */ + 0x0000000a /* EMC_DLL_XFORM_DQS13 */ + 0x0000000a /* EMC_DLL_XFORM_DQS14 */ + 0x0000000a /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00048000 /* EMC_DLL_XFORM_ADDR0 */ + 0x00048000 /* EMC_DLL_XFORM_ADDR1 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00048000 /* EMC_DLL_XFORM_ADDR3 */ + 0x00048000 /* EMC_DLL_XFORM_ADDR4 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000004 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000004 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000002 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000005 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000006 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000003 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000006 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000005 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000004 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000004 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000002 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000005 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000006 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000003 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000006 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000005 /* EMC_DLI_TRIM_TXDQS15 */ + 0x0000000e /* EMC_DLL_XFORM_DQ0 */ + 0x0000000e /* EMC_DLL_XFORM_DQ1 */ + 0x0000000e /* EMC_DLL_XFORM_DQ2 */ + 0x0000000e /* EMC_DLL_XFORM_DQ3 */ + 0x0000000e /* EMC_DLL_XFORM_DQ4 */ + 0x0000000e /* EMC_DLL_XFORM_DQ5 */ + 0x0000000e /* EMC_DLL_XFORM_DQ6 */ + 0x0000000e /* EMC_DLL_XFORM_DQ7 */ + 0x100002a0 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc085 /* EMC_XM2CLKPADCTRL */ + 0x00000101 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x00000000 /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x51451420 /* EMC_XM2DQSPADCTRL3 */ + 0x00514514 /* EMC_XM2DQSPADCTRL4 */ + 0x00514514 /* EMC_XM2DQSPADCTRL5 */ + 0x51451400 /* EMC_XM2DQSPADCTRL6 */ + 0x0606003f /* EMC_DSR_VTTGEN_DRV */ + 0x00000000 /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000100 /* EMC_ZCAL_WAIT_CNT */ + 0x0128000c /* EMC_MRS_WAIT_CNT2 */ + 0x00000000 /* EMC_CTT */ + 0x00000003 /* EMC_CTT_DURATION */ + 0x000040a0 /* EMC_CFG_PIPE */ + 0x800024aa /* EMC_DYN_SELF_REF_CONTROL */ + 0x0000000e /* EMC_QPOP */ >; }; + timing-792000000 { + clock-frequency = <792000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000000>; + nvidia,emc-cfg = <0x73300000>; + nvidia,emc-cfg-2 = <0x0080089d>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100002>; + nvidia,emc-mode-2 = <0x80200418>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80000d71>; + nvidia,emc-mrs-wait-cnt = <0x00f8000c>; + nvidia,emc-sel-dpd-ctrl = <0x00040000>; + nvidia,emc-xm2dqspadctrl2 = <0x0120113d>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00020000>; + + nvidia,emc-configuration = < + 0x00000025 /* EMC_RC */ + 0x000000cc /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x0000001a /* EMC_RAS */ + 0x00000009 /* EMC_RP */ + 0x00000008 /* EMC_R2W */ + 0x0000000d /* EMC_W2R */ + 0x00000004 /* EMC_R2P */ + 0x00000013 /* EMC_W2P */ + 0x00000009 /* EMC_RD_RCD */ + 0x00000009 /* EMC_WR_RCD */ + 0x00000004 /* EMC_RRD */ + 0x00000002 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000006 /* EMC_WDV */ + 0x00000006 /* EMC_WDV_MASK */ + 0x0000000b /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000002 /* EMC_EINPUT */ + 0x0000000d /* EMC_EINPUT_DURATION */ + 0x00080000 /* EMC_PUTERM_EXTRA */ + 0x00000004 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000001 /* EMC_QRST */ + 0x00000014 /* EMC_QSAFE */ + 0x00000018 /* EMC_RDV */ + 0x0000001a /* EMC_RDV_MASK */ + 0x000017e2 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x000005f8 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000003 /* EMC_PDEX2WR */ + 0x00000011 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x000000c6 /* EMC_AR2PDEN */ + 0x00000018 /* EMC_RW2PDEN */ + 0x000000d6 /* EMC_TXSR */ + 0x00000200 /* EMC_TXSRDLL */ + 0x00000005 /* EMC_TCKE */ + 0x00000006 /* EMC_TCKESR */ + 0x00000005 /* EMC_TPD */ + 0x0000001d /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000008 /* EMC_TCLKSTABLE */ + 0x00000008 /* EMC_TCLKSTOP */ + 0x00001822 /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x80000005 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x104ab198 /* EMC_FBIO_CFG5 */ + 0xe00700b1 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x00000009 /* EMC_DLL_XFORM_DQS0 */ + 0x00000009 /* EMC_DLL_XFORM_DQS1 */ + 0x00000009 /* EMC_DLL_XFORM_DQS2 */ + 0x00000007 /* EMC_DLL_XFORM_DQS3 */ + 0x00000006 /* EMC_DLL_XFORM_DQS4 */ + 0x00000006 /* EMC_DLL_XFORM_DQS5 */ + 0x007fc009 /* EMC_DLL_XFORM_DQS6 */ + 0x00000006 /* EMC_DLL_XFORM_DQS7 */ + 0x00000009 /* EMC_DLL_XFORM_DQS8 */ + 0x00000009 /* EMC_DLL_XFORM_DQS9 */ + 0x00000009 /* EMC_DLL_XFORM_DQS10 */ + 0x00000007 /* EMC_DLL_XFORM_DQS11 */ + 0x00000006 /* EMC_DLL_XFORM_DQS12 */ + 0x00000007 /* EMC_DLL_XFORM_DQS13 */ + 0x00000009 /* EMC_DLL_XFORM_DQS14 */ + 0x00000007 /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00034002 /* EMC_DLL_XFORM_ADDR0 */ + 0x00034002 /* EMC_DLL_XFORM_ADDR1 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00034002 /* EMC_DLL_XFORM_ADDR3 */ + 0x00034002 /* EMC_DLL_XFORM_ADDR4 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000008 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000008 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000005 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000009 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000009 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000007 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000009 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000008 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000008 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000008 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000005 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000009 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000009 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000007 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000009 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000008 /* EMC_DLI_TRIM_TXDQS15 */ + 0x0000000e /* EMC_DLL_XFORM_DQ0 */ + 0x0000000e /* EMC_DLL_XFORM_DQ1 */ + 0x0000000e /* EMC_DLL_XFORM_DQ2 */ + 0x0000000e /* EMC_DLL_XFORM_DQ3 */ + 0x0000000e /* EMC_DLL_XFORM_DQ4 */ + 0x0000000e /* EMC_DLL_XFORM_DQ5 */ + 0x0000000e /* EMC_DLL_XFORM_DQ6 */ + 0x0000000e /* EMC_DLL_XFORM_DQ7 */ + 0x100002a0 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc085 /* EMC_XM2CLKPADCTRL */ + 0x00000101 /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x00000000 /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x61861820 /* EMC_XM2DQSPADCTRL3 */ + 0x004d34d3 /* EMC_XM2DQSPADCTRL4 */ + 0x004d34d3 /* EMC_XM2DQSPADCTRL5 */ + 0x61861800 /* EMC_XM2DQSPADCTRL6 */ + 0x0606003f /* EMC_DSR_VTTGEN_DRV */ + 0x00000000 /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000100 /* EMC_ZCAL_WAIT_CNT */ + 0x00f8000c /* EMC_MRS_WAIT_CNT2 */ + 0x00000007 /* EMC_CTT */ + 0x00000004 /* EMC_CTT_DURATION */ + 0x00004080 /* EMC_CFG_PIPE */ + 0x80003012 /* EMC_DYN_SELF_REF_CONTROL */ + 0x0000000f /* EMC_QPOP */ + >; + }; }; }; @@ -1759,30 +5781,609 @@ emc-timings-1 { nvidia,ram-code = <1>; + timing-12750000 { + clock-frequency = <12750000>; + + nvidia,emem-configuration = < + 0x40040001 /* MC_EMEM_ARB_CFG */ + 0x8000000a /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000000 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000002 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06030203 /* MC_EMEM_ARB_DA_TURNS */ + 0x000a0402 /* MC_EMEM_ARB_DA_COVERS */ + 0x77e30303 /* MC_EMEM_ARB_MISC0 */ + 0x70000f03 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + + timing-20400000 { + clock-frequency = <20400000>; + + nvidia,emem-configuration = < + 0x40020001 /* MC_EMEM_ARB_CFG */ + 0x80000012 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000000 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000002 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06030203 /* MC_EMEM_ARB_DA_TURNS */ + 0x000a0402 /* MC_EMEM_ARB_DA_COVERS */ + 0x76230303 /* MC_EMEM_ARB_MISC0 */ + 0x70000f03 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + + timing-40800000 { + clock-frequency = <40800000>; + + nvidia,emem-configuration = < + 0xa0000001 /* MC_EMEM_ARB_CFG */ + 0x80000017 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000000 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000002 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06030203 /* MC_EMEM_ARB_DA_TURNS */ + 0x000a0402 /* MC_EMEM_ARB_DA_COVERS */ + 0x74a30303 /* MC_EMEM_ARB_MISC0 */ + 0x70000f03 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + + timing-68000000 { + clock-frequency = <68000000>; + + nvidia,emem-configuration = < + 0x00000001 /* MC_EMEM_ARB_CFG */ + 0x8000001e /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000000 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000002 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06030203 /* MC_EMEM_ARB_DA_TURNS */ + 0x000a0402 /* MC_EMEM_ARB_DA_COVERS */ + 0x74230403 /* MC_EMEM_ARB_MISC0 */ + 0x70000f03 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + + timing-102000000 { + clock-frequency = <102000000>; + + nvidia,emem-configuration = < + 0x08000001 /* MC_EMEM_ARB_CFG */ + 0x80000026 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000000 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000002 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06030203 /* MC_EMEM_ARB_DA_TURNS */ + 0x000a0403 /* MC_EMEM_ARB_DA_COVERS */ + 0x73c30504 /* MC_EMEM_ARB_MISC0 */ + 0x70000f03 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + + timing-204000000 { + clock-frequency = <204000000>; + + nvidia,emem-configuration = < + 0x01000003 /* MC_EMEM_ARB_CFG */ + 0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000005 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000004 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000004 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06040203 /* MC_EMEM_ARB_DA_TURNS */ + 0x000a0405 /* MC_EMEM_ARB_DA_COVERS */ + 0x73840a06 /* MC_EMEM_ARB_MISC0 */ + 0x70000f03 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + + timing-300000000 { + clock-frequency = <300000000>; + + nvidia,emem-configuration = < + 0x08000004 /* MC_EMEM_ARB_CFG */ + 0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000007 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000004 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000005 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000007 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000004 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06040202 /* MC_EMEM_ARB_DA_TURNS */ + 0x000b0607 /* MC_EMEM_ARB_DA_COVERS */ + 0x77450e08 /* MC_EMEM_ARB_MISC0 */ + 0x70000f03 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + + timing-396000000 { + clock-frequency = <396000000>; + + nvidia,emem-configuration = < + 0x0f000005 /* MC_EMEM_ARB_CFG */ + 0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000009 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000005 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000007 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000004 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06040202 /* MC_EMEM_ARB_DA_TURNS */ + 0x000d0709 /* MC_EMEM_ARB_DA_COVERS */ + 0x7586120a /* MC_EMEM_ARB_MISC0 */ + 0x70000f03 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + + timing-528000000 { + clock-frequency = <528000000>; + + nvidia,emem-configuration = < + 0x0f000007 /* MC_EMEM_ARB_CFG */ + 0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RP */ + 0x0000000d /* MC_EMEM_ARB_TIMING_RC */ + 0x00000008 /* MC_EMEM_ARB_TIMING_RAS */ + 0x0000000a /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000009 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000005 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06050202 /* MC_EMEM_ARB_DA_TURNS */ + 0x0010090d /* MC_EMEM_ARB_DA_COVERS */ + 0x7428180e /* MC_EMEM_ARB_MISC0 */ + 0x70000f03 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + + timing-600000000 { + clock-frequency = <600000000>; + + nvidia,emem-configuration = < + 0x00000009 /* MC_EMEM_ARB_CFG */ + 0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000004 /* MC_EMEM_ARB_TIMING_RP */ + 0x0000000e /* MC_EMEM_ARB_TIMING_RC */ + 0x00000009 /* MC_EMEM_ARB_TIMING_RAS */ + 0x0000000b /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x0000000b /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000005 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000007 /* MC_EMEM_ARB_TIMING_W2R */ + 0x07050202 /* MC_EMEM_ARB_DA_TURNS */ + 0x00130b0e /* MC_EMEM_ARB_DA_COVERS */ + 0x73a91b0f /* MC_EMEM_ARB_MISC0 */ + 0x70000f03 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + + timing-792000000 { + clock-frequency = <792000000>; + + nvidia,emem-configuration = < + 0x0e00000b /* MC_EMEM_ARB_CFG */ + 0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000004 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000005 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000013 /* MC_EMEM_ARB_TIMING_RC */ + 0x0000000c /* MC_EMEM_ARB_TIMING_RAS */ + 0x0000000f /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x0000000c /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000008 /* MC_EMEM_ARB_TIMING_W2R */ + 0x08060202 /* MC_EMEM_ARB_DA_TURNS */ + 0x00160d13 /* MC_EMEM_ARB_DA_COVERS */ + 0x734c2414 /* MC_EMEM_ARB_MISC0 */ + 0x70000f02 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + }; + + emc-timings-4 { + nvidia,ram-code = <4>; + + timing-12750000 { + clock-frequency = <12750000>; + + nvidia,emem-configuration = < + 0x40040001 /* MC_EMEM_ARB_CFG */ + 0x8000000a /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000000 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000002 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06030203 /* MC_EMEM_ARB_DA_TURNS */ + 0x000a0502 /* MC_EMEM_ARB_DA_COVERS */ + 0x77e30303 /* MC_EMEM_ARB_MISC0 */ + 0x70000f03 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + + timing-20400000 { + clock-frequency = <20400000>; + + nvidia,emem-configuration = < + 0x40020001 /* MC_EMEM_ARB_CFG */ + 0x80000012 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000000 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000002 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06030203 /* MC_EMEM_ARB_DA_TURNS */ + 0x000a0502 /* MC_EMEM_ARB_DA_COVERS */ + 0x77430303 /* MC_EMEM_ARB_MISC0 */ + 0x70000f03 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + + timing-40800000 { + clock-frequency = <40800000>; + + nvidia,emem-configuration = < + 0xa0000001 /* MC_EMEM_ARB_CFG */ + 0x80000017 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000000 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000002 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06030203 /* MC_EMEM_ARB_DA_TURNS */ + 0x000a0502 /* MC_EMEM_ARB_DA_COVERS */ + 0x75e30303 /* MC_EMEM_ARB_MISC0 */ + 0x70000f03 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + + timing-68000000 { + clock-frequency = <68000000>; + + nvidia,emem-configuration = < + 0x00000001 /* MC_EMEM_ARB_CFG */ + 0x8000001e /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000000 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000002 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06030203 /* MC_EMEM_ARB_DA_TURNS */ + 0x000a0502 /* MC_EMEM_ARB_DA_COVERS */ + 0x75430403 /* MC_EMEM_ARB_MISC0 */ + 0x70000f03 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + + timing-102000000 { + clock-frequency = <102000000>; + + nvidia,emem-configuration = < + 0x08000001 /* MC_EMEM_ARB_CFG */ + 0x80000026 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000000 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000002 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06030203 /* MC_EMEM_ARB_DA_TURNS */ + 0x000a0503 /* MC_EMEM_ARB_DA_COVERS */ + 0x74e30504 /* MC_EMEM_ARB_MISC0 */ + 0x70000f03 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + + timing-204000000 { + clock-frequency = <204000000>; + + nvidia,emem-configuration = < + 0x01000003 /* MC_EMEM_ARB_CFG */ + 0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000004 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000004 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000004 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06040203 /* MC_EMEM_ARB_DA_TURNS */ + 0x000a0504 /* MC_EMEM_ARB_DA_COVERS */ + 0x74a40a05 /* MC_EMEM_ARB_MISC0 */ + 0x70000f03 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + + timing-300000000 { + clock-frequency = <300000000>; + + nvidia,emem-configuration = < + 0x08000004 /* MC_EMEM_ARB_CFG */ + 0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000007 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000004 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000005 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000007 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000004 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06040202 /* MC_EMEM_ARB_DA_TURNS */ + 0x000b0607 /* MC_EMEM_ARB_DA_COVERS */ + 0x77450e08 /* MC_EMEM_ARB_MISC0 */ + 0x70000f03 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + + timing-396000000 { + clock-frequency = <396000000>; + + nvidia,emem-configuration = < + 0x0f000005 /* MC_EMEM_ARB_CFG */ + 0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000009 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000005 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000007 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000004 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06040202 /* MC_EMEM_ARB_DA_TURNS */ + 0x000d0709 /* MC_EMEM_ARB_DA_COVERS */ + 0x7586120a /* MC_EMEM_ARB_MISC0 */ + 0x70000f03 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + + timing-528000000 { + clock-frequency = <528000000>; + + nvidia,emem-configuration = < + 0x0f000007 /* MC_EMEM_ARB_CFG */ + 0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RP */ + 0x0000000c /* MC_EMEM_ARB_TIMING_RC */ + 0x00000007 /* MC_EMEM_ARB_TIMING_RAS */ + 0x0000000a /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000009 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000005 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06050202 /* MC_EMEM_ARB_DA_TURNS */ + 0x0010090c /* MC_EMEM_ARB_DA_COVERS */ + 0x7488180d /* MC_EMEM_ARB_MISC0 */ + 0x70000f03 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + + timing-600000000 { + clock-frequency = <600000000>; + + nvidia,emem-configuration = < + 0x00000009 /* MC_EMEM_ARB_CFG */ + 0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000004 /* MC_EMEM_ARB_TIMING_RP */ + 0x0000000e /* MC_EMEM_ARB_TIMING_RC */ + 0x00000009 /* MC_EMEM_ARB_TIMING_RAS */ + 0x0000000b /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x0000000b /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000005 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000007 /* MC_EMEM_ARB_TIMING_W2R */ + 0x07050202 /* MC_EMEM_ARB_DA_TURNS */ + 0x00130b0e /* MC_EMEM_ARB_DA_COVERS */ + 0x74691b0f /* MC_EMEM_ARB_MISC0 */ + 0x70000f03 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + + timing-792000000 { + clock-frequency = <792000000>; + + nvidia,emem-configuration = < + 0x0e00000b /* MC_EMEM_ARB_CFG */ + 0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000004 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000005 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000013 /* MC_EMEM_ARB_TIMING_RC */ + 0x0000000c /* MC_EMEM_ARB_TIMING_RAS */ + 0x0000000f /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x0000000c /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000008 /* MC_EMEM_ARB_TIMING_W2R */ + 0x08060202 /* MC_EMEM_ARB_DA_TURNS */ + 0x00170e13 /* MC_EMEM_ARB_DA_COVERS */ + 0x746c2414 /* MC_EMEM_ARB_MISC0 */ + 0x70000f02 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + }; + + emc-timings-6 { + nvidia,ram-code = <6>; timing-12750000 { clock-frequency = <12750000>; nvidia,emem-configuration = < - 0x40040001 - 0x8000000a - 0x00000001 - 0x00000001 - 0x00000002 - 0x00000000 - 0x00000002 - 0x00000001 - 0x00000002 - 0x00000008 - 0x00000003 - 0x00000002 - 0x00000003 - 0x00000006 - 0x06030203 - 0x000a0402 - 0x77e30303 - 0x70000f03 - 0x001f0000 + 0x40040001 /* MC_EMEM_ARB_CFG */ + 0x8000000a /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000000 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000002 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06030203 /* MC_EMEM_ARB_DA_TURNS */ + 0x000a0402 /* MC_EMEM_ARB_DA_COVERS */ + 0x77e30303 /* MC_EMEM_ARB_MISC0 */ + 0x70000f03 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ >; }; @@ -1790,25 +6391,25 @@ clock-frequency = <20400000>; nvidia,emem-configuration = < - 0x40020001 - 0x80000012 - 0x00000001 - 0x00000001 - 0x00000002 - 0x00000000 - 0x00000002 - 0x00000001 - 0x00000002 - 0x00000008 - 0x00000003 - 0x00000002 - 0x00000003 - 0x00000006 - 0x06030203 - 0x000a0402 - 0x76230303 - 0x70000f03 - 0x001f0000 + 0x40020001 /* MC_EMEM_ARB_CFG */ + 0x80000012 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000000 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000002 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06030203 /* MC_EMEM_ARB_DA_TURNS */ + 0x000a0402 /* MC_EMEM_ARB_DA_COVERS */ + 0x76230303 /* MC_EMEM_ARB_MISC0 */ + 0x70000f03 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ >; }; @@ -1816,25 +6417,25 @@ clock-frequency = <40800000>; nvidia,emem-configuration = < - 0xa0000001 - 0x80000017 - 0x00000001 - 0x00000001 - 0x00000002 - 0x00000000 - 0x00000002 - 0x00000001 - 0x00000002 - 0x00000008 - 0x00000003 - 0x00000002 - 0x00000003 - 0x00000006 - 0x06030203 - 0x000a0402 - 0x74a30303 - 0x70000f03 - 0x001f0000 + 0xa0000001 /* MC_EMEM_ARB_CFG */ + 0x80000017 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000000 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000002 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06030203 /* MC_EMEM_ARB_DA_TURNS */ + 0x000a0402 /* MC_EMEM_ARB_DA_COVERS */ + 0x74a30303 /* MC_EMEM_ARB_MISC0 */ + 0x70000f03 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ >; }; @@ -1842,25 +6443,25 @@ clock-frequency = <68000000>; nvidia,emem-configuration = < - 0x00000001 - 0x8000001e - 0x00000001 - 0x00000001 - 0x00000002 - 0x00000000 - 0x00000002 - 0x00000001 - 0x00000002 - 0x00000008 - 0x00000003 - 0x00000002 - 0x00000003 - 0x00000006 - 0x06030203 - 0x000a0402 - 0x74230403 - 0x70000f03 - 0x001f0000 + 0x00000001 /* MC_EMEM_ARB_CFG */ + 0x8000001e /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000000 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000002 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06030203 /* MC_EMEM_ARB_DA_TURNS */ + 0x000a0402 /* MC_EMEM_ARB_DA_COVERS */ + 0x74230403 /* MC_EMEM_ARB_MISC0 */ + 0x70000f03 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ >; }; @@ -1868,25 +6469,25 @@ clock-frequency = <102000000>; nvidia,emem-configuration = < - 0x08000001 - 0x80000026 - 0x00000001 - 0x00000001 - 0x00000003 - 0x00000000 - 0x00000002 - 0x00000001 - 0x00000002 - 0x00000008 - 0x00000003 - 0x00000002 - 0x00000003 - 0x00000006 - 0x06030203 - 0x000a0403 - 0x73c30504 - 0x70000f03 - 0x001f0000 + 0x08000001 /* MC_EMEM_ARB_CFG */ + 0x80000026 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000000 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000002 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06030203 /* MC_EMEM_ARB_DA_TURNS */ + 0x000a0403 /* MC_EMEM_ARB_DA_COVERS */ + 0x73c30504 /* MC_EMEM_ARB_MISC0 */ + 0x70000f03 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ >; }; @@ -1894,25 +6495,25 @@ clock-frequency = <204000000>; nvidia,emem-configuration = < - 0x01000003 - 0x80000040 - 0x00000001 - 0x00000001 - 0x00000005 - 0x00000002 - 0x00000004 - 0x00000001 - 0x00000002 - 0x00000008 - 0x00000003 - 0x00000002 - 0x00000004 - 0x00000006 - 0x06040203 - 0x000a0405 - 0x73840a06 - 0x70000f03 - 0x001f0000 + 0x01000003 /* MC_EMEM_ARB_CFG */ + 0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000005 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000004 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000004 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06040203 /* MC_EMEM_ARB_DA_TURNS */ + 0x000a0405 /* MC_EMEM_ARB_DA_COVERS */ + 0x73840a06 /* MC_EMEM_ARB_MISC0 */ + 0x70000f03 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ >; }; @@ -1920,25 +6521,25 @@ clock-frequency = <300000000>; nvidia,emem-configuration = < - 0x08000004 - 0x80000040 - 0x00000001 - 0x00000002 - 0x00000007 - 0x00000004 - 0x00000005 - 0x00000001 - 0x00000002 - 0x00000007 - 0x00000002 - 0x00000002 - 0x00000004 - 0x00000006 - 0x06040202 - 0x000b0607 - 0x77450e08 - 0x70000f03 - 0x001f0000 + 0x08000004 /* MC_EMEM_ARB_CFG */ + 0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000007 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000004 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000005 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000007 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000004 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06040202 /* MC_EMEM_ARB_DA_TURNS */ + 0x000b0607 /* MC_EMEM_ARB_DA_COVERS */ + 0x77450e08 /* MC_EMEM_ARB_MISC0 */ + 0x70000f03 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ >; }; @@ -1946,25 +6547,51 @@ clock-frequency = <396000000>; nvidia,emem-configuration = < - 0x0f000005 - 0x80000040 - 0x00000001 - 0x00000002 - 0x00000009 - 0x00000005 - 0x00000007 - 0x00000001 - 0x00000002 - 0x00000008 - 0x00000002 - 0x00000002 - 0x00000004 - 0x00000006 - 0x06040202 - 0x000d0709 - 0x7586120a - 0x70000f03 - 0x001f0000 + 0x0f000005 /* MC_EMEM_ARB_CFG */ + 0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000009 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000005 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000007 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000004 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06040202 /* MC_EMEM_ARB_DA_TURNS */ + 0x000d0709 /* MC_EMEM_ARB_DA_COVERS */ + 0x7586120a /* MC_EMEM_ARB_MISC0 */ + 0x70000f03 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + + timing-528000000 { + clock-frequency = <528000000>; + + nvidia,emem-configuration = < + 0x0f000007 /* MC_EMEM_ARB_CFG */ + 0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RP */ + 0x0000000d /* MC_EMEM_ARB_TIMING_RC */ + 0x00000008 /* MC_EMEM_ARB_TIMING_RAS */ + 0x0000000a /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000009 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000005 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06050202 /* MC_EMEM_ARB_DA_TURNS */ + 0x0010090d /* MC_EMEM_ARB_DA_COVERS */ + 0x7428180e /* MC_EMEM_ARB_MISC0 */ + 0x70000f03 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ >; }; @@ -1972,25 +6599,25 @@ clock-frequency = <600000000>; nvidia,emem-configuration = < - 0x00000009 - 0x80000040 - 0x00000003 - 0x00000004 - 0x0000000e - 0x00000009 - 0x0000000b - 0x00000001 - 0x00000003 - 0x0000000b - 0x00000002 - 0x00000002 - 0x00000005 - 0x00000007 - 0x07050202 - 0x00130b0e - 0x73a91b0f - 0x70000f03 - 0x001f0000 + 0x00000009 /* MC_EMEM_ARB_CFG */ + 0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000004 /* MC_EMEM_ARB_TIMING_RP */ + 0x0000000e /* MC_EMEM_ARB_TIMING_RC */ + 0x00000009 /* MC_EMEM_ARB_TIMING_RAS */ + 0x0000000b /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x0000000b /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000005 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000007 /* MC_EMEM_ARB_TIMING_W2R */ + 0x07050202 /* MC_EMEM_ARB_DA_TURNS */ + 0x00130b0e /* MC_EMEM_ARB_DA_COVERS */ + 0x73a91b0f /* MC_EMEM_ARB_MISC0 */ + 0x70000f03 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ >; }; @@ -1998,25 +6625,25 @@ clock-frequency = <792000000>; nvidia,emem-configuration = < - 0x0e00000b - 0x80000040 - 0x00000004 - 0x00000005 - 0x00000013 - 0x0000000c - 0x0000000f - 0x00000002 - 0x00000003 - 0x0000000c - 0x00000002 - 0x00000002 - 0x00000006 - 0x00000008 - 0x08060202 - 0x00160d13 - 0x734c2414 - 0x70000f02 - 0x001f0000 + 0x0e00000b /* MC_EMEM_ARB_CFG */ + 0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000004 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000005 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000013 /* MC_EMEM_ARB_TIMING_RC */ + 0x0000000c /* MC_EMEM_ARB_TIMING_RAS */ + 0x0000000f /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x0000000c /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000008 /* MC_EMEM_ARB_TIMING_W2R */ + 0x08060202 /* MC_EMEM_ARB_DA_TURNS */ + 0x00160d13 /* MC_EMEM_ARB_DA_COVERS */ + 0x734c2414 /* MC_EMEM_ARB_MISC0 */ + 0x70000f02 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ >; }; }; diff --git a/arch/arm/boot/dts/tegra124-nyan-blaze-emc.dtsi b/arch/arm/boot/dts/tegra124-nyan-blaze-emc.dtsi index c7c31d4c1a2b..d2beea0bd15f 100644 --- a/arch/arm/boot/dts/tegra124-nyan-blaze-emc.dtsi +++ b/arch/arm/boot/dts/tegra124-nyan-blaze-emc.dtsi @@ -68,7 +68,7 @@ }; }; - emc@7001b000 { + external-memory-controller@7001b000 { emc-timings-1 { nvidia,ram-code = <1>; diff --git a/arch/arm/boot/dts/tegra124-venice2.dts b/arch/arm/boot/dts/tegra124-venice2.dts index 5d5e6e18bc7b..7309393bfced 100644 --- a/arch/arm/boot/dts/tegra124-venice2.dts +++ b/arch/arm/boot/dts/tegra124-venice2.dts @@ -38,6 +38,9 @@ sor@54540000 { status = "okay"; + avdd-io-hdmi-dp-supply = <&vdd_1v05_run>; + vdd-hdmi-dp-pll-supply = <&vdd_3v3_run>; + nvidia,dpaux = <&dpaux>; nvidia,panel = <&panel>; }; diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi index b113e47b2b2a..7f330b1f150f 100644 --- a/arch/arm/boot/dts/tegra124.dtsi +++ b/arch/arm/boot/dts/tegra124.dtsi @@ -157,10 +157,11 @@ reg = <0x0 0x54540000 0x0 0x00040000>; interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; clocks = <&tegra_car TEGRA124_CLK_SOR0>, + <&tegra_car TEGRA124_CLK_SOR0_OUT>, <&tegra_car TEGRA124_CLK_PLL_D_OUT0>, <&tegra_car TEGRA124_CLK_PLL_DP>, <&tegra_car TEGRA124_CLK_CLK_M>; - clock-names = "sor", "parent", "dp", "safe"; + clock-names = "sor", "out", "parent", "dp", "safe"; resets = <&tegra_car 182>; reset-names = "sor"; status = "disabled"; @@ -621,9 +622,11 @@ #iommu-cells = <1>; }; - emc: emc@7001b000 { + emc: external-memory-controller@7001b000 { compatible = "nvidia,tegra124-emc"; reg = <0x0 0x7001b000 0x0 0x1000>; + clocks = <&tegra_car TEGRA124_CLK_EMC>; + clock-names = "emc"; nvidia,memory-controller = <&mc>; }; diff --git a/arch/arm/boot/dts/tegra20-cpu-opp-microvolt.dtsi b/arch/arm/boot/dts/tegra20-cpu-opp-microvolt.dtsi new file mode 100644 index 000000000000..e85ffdbef876 --- /dev/null +++ b/arch/arm/boot/dts/tegra20-cpu-opp-microvolt.dtsi @@ -0,0 +1,201 @@ +// SPDX-License-Identifier: GPL-2.0 + +/ { + cpu0_opp_table: cpu_opp_table0 { + opp@216000000_750 { + opp-microvolt = <750000 750000 1125000>; + }; + + opp@216000000_800 { + opp-microvolt = <800000 800000 1125000>; + }; + + opp@312000000_750 { + opp-microvolt = <750000 750000 1125000>; + }; + + opp@312000000_800 { + opp-microvolt = <800000 800000 1125000>; + }; + + opp@456000000_750 { + opp-microvolt = <750000 750000 1125000>; + }; + + opp@456000000_800 { + opp-microvolt = <800000 800000 1125000>; + }; + + opp@456000000_800_2_2 { + opp-microvolt = <800000 800000 1125000>; + }; + + opp@456000000_800_3_2 { + opp-microvolt = <800000 800000 1125000>; + }; + + opp@456000000_825 { + opp-microvolt = <825000 825000 1125000>; + }; + + opp@608000000_750 { + opp-microvolt = <750000 750000 1125000>; + }; + + opp@608000000_800 { + opp-microvolt = <800000 800000 1125000>; + }; + + opp@608000000_800_3_2 { + opp-microvolt = <800000 800000 1125000>; + }; + + opp@608000000_825 { + opp-microvolt = <825000 825000 1125000>; + }; + + opp@608000000_850 { + opp-microvolt = <850000 850000 1125000>; + }; + + opp@608000000_900 { + opp-microvolt = <900000 900000 1125000>; + }; + + opp@760000000_775 { + opp-microvolt = <775000 775000 1125000>; + }; + + opp@760000000_800 { + opp-microvolt = <800000 800000 1125000>; + }; + + opp@760000000_850 { + opp-microvolt = <850000 850000 1125000>; + }; + + opp@760000000_875 { + opp-microvolt = <875000 875000 1125000>; + }; + + opp@760000000_875_1_1 { + opp-microvolt = <875000 875000 1125000>; + }; + + opp@760000000_875_0_2 { + opp-microvolt = <875000 875000 1125000>; + }; + + opp@760000000_875_1_2 { + opp-microvolt = <875000 875000 1125000>; + }; + + opp@760000000_900 { + opp-microvolt = <900000 900000 1125000>; + }; + + opp@760000000_975 { + opp-microvolt = <975000 975000 1125000>; + }; + + opp@816000000_800 { + opp-microvolt = <800000 800000 1125000>; + }; + + opp@816000000_850 { + opp-microvolt = <850000 850000 1125000>; + }; + + opp@816000000_875 { + opp-microvolt = <875000 875000 1125000>; + }; + + opp@816000000_950 { + opp-microvolt = <950000 950000 1125000>; + }; + + opp@816000000_1000 { + opp-microvolt = <1000000 1000000 1125000>; + }; + + opp@912000000_850 { + opp-microvolt = <850000 850000 1125000>; + }; + + opp@912000000_900 { + opp-microvolt = <900000 900000 1125000>; + }; + + opp@912000000_925 { + opp-microvolt = <925000 925000 1125000>; + }; + + opp@912000000_950 { + opp-microvolt = <950000 950000 1125000>; + }; + + opp@912000000_950_0_2 { + opp-microvolt = <950000 950000 1125000>; + }; + + opp@912000000_950_2_2 { + opp-microvolt = <950000 950000 1125000>; + }; + + opp@912000000_1000 { + opp-microvolt = <1000000 1000000 1125000>; + }; + + opp@912000000_1050 { + opp-microvolt = <1050000 1050000 1125000>; + }; + + opp@1000000000_875 { + opp-microvolt = <875000 875000 1125000>; + }; + + opp@1000000000_900 { + opp-microvolt = <900000 900000 1125000>; + }; + + opp@1000000000_950 { + opp-microvolt = <950000 950000 1125000>; + }; + + opp@1000000000_975 { + opp-microvolt = <975000 975000 1125000>; + }; + + opp@1000000000_1000 { + opp-microvolt = <1000000 1000000 1125000>; + }; + + opp@1000000000_1000_0_2 { + opp-microvolt = <1000000 1000000 1125000>; + }; + + opp@1000000000_1025 { + opp-microvolt = <1025000 1025000 1125000>; + }; + + opp@1000000000_1100 { + opp-microvolt = <1100000 1100000 1125000>; + }; + + opp@1200000000_1000 { + opp-microvolt = <1000000 1000000 1125000>; + }; + + opp@1200000000_1050 { + opp-microvolt = <1050000 1050000 1125000>; + }; + + opp@1200000000_1100 { + opp-microvolt = <1100000 1100000 1125000>; + }; + + opp@1200000000_1125 { + opp-microvolt = <1125000 1125000 1125000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/tegra20-cpu-opp.dtsi b/arch/arm/boot/dts/tegra20-cpu-opp.dtsi new file mode 100644 index 000000000000..c878f4231791 --- /dev/null +++ b/arch/arm/boot/dts/tegra20-cpu-opp.dtsi @@ -0,0 +1,302 @@ +// SPDX-License-Identifier: GPL-2.0 + +/ { + cpu0_opp_table: cpu_opp_table0 { + compatible = "operating-points-v2"; + opp-shared; + + opp@216000000_750 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x0F 0x0003>; + opp-hz = /bits/ 64 <216000000>; + }; + + opp@216000000_800 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x0F 0x0004>; + opp-hz = /bits/ 64 <216000000>; + }; + + opp@312000000_750 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x0F 0x0003>; + opp-hz = /bits/ 64 <312000000>; + }; + + opp@312000000_800 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x0F 0x0004>; + opp-hz = /bits/ 64 <312000000>; + }; + + opp@456000000_750 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x0C 0x0003>; + opp-hz = /bits/ 64 <456000000>; + }; + + opp@456000000_800 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x03 0x0006>; + opp-hz = /bits/ 64 <456000000>; + }; + + opp@456000000_800_2_2 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x04 0x0004>; + opp-hz = /bits/ 64 <456000000>; + }; + + opp@456000000_800_3_2 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x08 0x0004>; + opp-hz = /bits/ 64 <456000000>; + }; + + opp@456000000_825 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x03 0x0001>; + opp-hz = /bits/ 64 <456000000>; + }; + + opp@608000000_750 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x08 0x0003>; + opp-hz = /bits/ 64 <608000000>; + }; + + opp@608000000_800 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x04 0x0006>; + opp-hz = /bits/ 64 <608000000>; + }; + + opp@608000000_800_3_2 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x08 0x0004>; + opp-hz = /bits/ 64 <608000000>; + }; + + opp@608000000_825 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x04 0x0001>; + opp-hz = /bits/ 64 <608000000>; + }; + + opp@608000000_850 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x03 0x0006>; + opp-hz = /bits/ 64 <608000000>; + }; + + opp@608000000_900 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x03 0x0001>; + opp-hz = /bits/ 64 <608000000>; + }; + + opp@760000000_775 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x08 0x0003>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@760000000_800 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x08 0x0004>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@760000000_850 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x04 0x0006>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@760000000_875 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x04 0x0001>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@760000000_875_1_1 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x02 0x0002>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@760000000_875_0_2 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x01 0x0004>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@760000000_875_1_2 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x02 0x0004>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@760000000_900 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x01 0x0002>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@760000000_975 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x03 0x0001>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@816000000_800 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x08 0x0007>; + opp-hz = /bits/ 64 <816000000>; + }; + + opp@816000000_850 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x04 0x0002>; + opp-hz = /bits/ 64 <816000000>; + }; + + opp@816000000_875 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x04 0x0005>; + opp-hz = /bits/ 64 <816000000>; + }; + + opp@816000000_950 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x03 0x0006>; + opp-hz = /bits/ 64 <816000000>; + }; + + opp@816000000_1000 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x03 0x0001>; + opp-hz = /bits/ 64 <816000000>; + }; + + opp@912000000_850 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x08 0x0007>; + opp-hz = /bits/ 64 <912000000>; + }; + + opp@912000000_900 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x04 0x0002>; + opp-hz = /bits/ 64 <912000000>; + }; + + opp@912000000_925 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x04 0x0001>; + opp-hz = /bits/ 64 <912000000>; + }; + + opp@912000000_950 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x02 0x0006>; + opp-hz = /bits/ 64 <912000000>; + }; + + opp@912000000_950_0_2 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x01 0x0004>; + opp-hz = /bits/ 64 <912000000>; + }; + + opp@912000000_950_2_2 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x04 0x0004>; + opp-hz = /bits/ 64 <912000000>; + }; + + opp@912000000_1000 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x01 0x0002>; + opp-hz = /bits/ 64 <912000000>; + }; + + opp@912000000_1050 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x03 0x0001>; + opp-hz = /bits/ 64 <912000000>; + }; + + opp@1000000000_875 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x08 0x0007>; + opp-hz = /bits/ 64 <1000000000>; + }; + + opp@1000000000_900 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x04 0x0002>; + opp-hz = /bits/ 64 <1000000000>; + }; + + opp@1000000000_950 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x04 0x0004>; + opp-hz = /bits/ 64 <1000000000>; + }; + + opp@1000000000_975 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x04 0x0001>; + opp-hz = /bits/ 64 <1000000000>; + }; + + opp@1000000000_1000 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x02 0x0006>; + opp-hz = /bits/ 64 <1000000000>; + }; + + opp@1000000000_1000_0_2 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x01 0x0004>; + opp-hz = /bits/ 64 <1000000000>; + }; + + opp@1000000000_1025 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x01 0x0002>; + opp-hz = /bits/ 64 <1000000000>; + }; + + opp@1000000000_1100 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x03 0x0001>; + opp-hz = /bits/ 64 <1000000000>; + }; + + opp@1200000000_1000 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x08 0x0004>; + opp-hz = /bits/ 64 <1200000000>; + }; + + opp@1200000000_1050 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x04 0x0004>; + opp-hz = /bits/ 64 <1200000000>; + }; + + opp@1200000000_1100 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x02 0x0004>; + opp-hz = /bits/ 64 <1200000000>; + }; + + opp@1200000000_1125 { + clock-latency-ns = <400000>; + opp-supported-hw = <0x01 0x0004>; + opp-hz = /bits/ 64 <1200000000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts index 8861e0976e37..be0ab9b84b9a 100644 --- a/arch/arm/boot/dts/tegra20-paz00.dts +++ b/arch/arm/boot/dts/tegra20-paz00.dts @@ -3,6 +3,8 @@ #include <dt-bindings/input/input.h> #include "tegra20.dtsi" +#include "tegra20-cpu-opp.dtsi" +#include "tegra20-cpu-opp-microvolt.dtsi" / { model = "Toshiba AC100 / Dynabook AZ"; @@ -309,6 +311,52 @@ reset-names = "i2c"; }; + memory-controller@7000f400 { + nvidia,use-ram-code; + + emc-tables@hynix { + nvidia,ram-code = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + + emc-table@166500 { + reg = <166500>; + compatible = "nvidia,tegra20-emc-table"; + clock-frequency = <166500>; + nvidia,emc-registers = <0x0000000a 0x00000016 + 0x00000008 0x00000003 0x00000004 0x00000004 + 0x00000002 0x0000000c 0x00000003 0x00000003 + 0x00000002 0x00000001 0x00000004 0x00000005 + 0x00000004 0x00000009 0x0000000d 0x000004df + 0x00000000 0x00000003 0x00000003 0x00000003 + 0x00000003 0x00000001 0x0000000a 0x000000c8 + 0x00000003 0x00000006 0x00000004 0x00000008 + 0x00000002 0x00000000 0x00000000 0x00000002 + 0x00000000 0x00000000 0x00000083 0xe03b0323 + 0x007fe010 0x00001414 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000>; + }; + + emc-table@333000 { + reg = <333000>; + compatible = "nvidia,tegra20-emc-table"; + clock-frequency = <333000>; + nvidia,emc-registers = <0x00000018 0x00000033 + 0x00000012 0x00000004 0x00000004 0x00000005 + 0x00000003 0x0000000c 0x00000006 0x00000006 + 0x00000003 0x00000001 0x00000004 0x00000005 + 0x00000004 0x00000009 0x0000000d 0x00000bff + 0x00000000 0x00000003 0x00000003 0x00000006 + 0x00000006 0x00000001 0x00000011 0x000000c8 + 0x00000003 0x0000000e 0x00000007 0x00000008 + 0x00000002 0x00000000 0x00000000 0x00000002 + 0x00000000 0x00000000 0x00000083 0xf0440303 + 0x007fe010 0x00001414 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000>; + }; + }; + }; + i2c@7000d000 { status = "okay"; clock-frequency = <400000>; @@ -337,18 +385,26 @@ regulator-always-on; }; - sm0 { + core_vdd_reg: sm0 { regulator-name = "+1.2vs_sm0,vdd_core"; regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; + regulator-max-microvolt = <1225000>; + regulator-coupled-with = <&rtc_vdd_reg &cpu_vdd_reg>; + regulator-coupled-max-spread = <170000 450000>; regulator-always-on; + + nvidia,tegra-core-regulator; }; - sm1 { + cpu_vdd_reg: sm1 { regulator-name = "+1.0vs_sm1,vdd_cpu"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1100000>; + regulator-coupled-with = <&core_vdd_reg &rtc_vdd_reg>; + regulator-coupled-max-spread = <450000 450000>; regulator-always-on; + + nvidia,tegra-cpu-regulator; }; sm2_reg: sm2 { @@ -367,10 +423,15 @@ regulator-always-on; }; - ldo2 { + rtc_vdd_reg: ldo2 { regulator-name = "+1.2vs_ldo2,vdd_rtc"; regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; + regulator-max-microvolt = <1225000>; + regulator-coupled-with = <&core_vdd_reg &cpu_vdd_reg>; + regulator-coupled-max-spread = <170000 450000>; + regulator-always-on; + + nvidia,tegra-rtc-regulator; }; ldo3 { @@ -603,4 +664,16 @@ <&tegra_car TEGRA20_CLK_CDEV1>; clock-names = "pll_a", "pll_a_out0", "mclk"; }; + + cpus { + cpu0: cpu@0 { + cpu-supply = <&cpu_vdd_reg>; + operating-points-v2 = <&cpu0_opp_table>; + }; + + cpu@1 { + cpu-supply = <&cpu_vdd_reg>; + operating-points-v2 = <&cpu0_opp_table>; + }; + }; }; diff --git a/arch/arm/boot/dts/tegra20-trimslice.dts b/arch/arm/boot/dts/tegra20-trimslice.dts index 3e5ac096d85e..8debd3d3c20d 100644 --- a/arch/arm/boot/dts/tegra20-trimslice.dts +++ b/arch/arm/boot/dts/tegra20-trimslice.dts @@ -3,6 +3,7 @@ #include <dt-bindings/input/input.h> #include "tegra20.dtsi" +#include "tegra20-cpu-opp.dtsi" / { model = "Compulab TrimSlice board"; @@ -471,4 +472,14 @@ <&tegra_car TEGRA20_CLK_CDEV1>; clock-names = "pll_a", "pll_a_out0", "mclk"; }; + + cpus { + cpu0: cpu@0 { + operating-points-v2 = <&cpu0_opp_table>; + }; + + cpu@1 { + operating-points-v2 = <&cpu0_opp_table>; + }; + }; }; diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index 8c942e60703e..9c58e7fcf5c0 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -851,12 +851,14 @@ device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0>; + clocks = <&tegra_car TEGRA20_CLK_CCLK>; }; cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <1>; + clocks = <&tegra_car TEGRA20_CLK_CCLK>; }; }; diff --git a/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi b/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi index 02f8126481a2..8b7a827d604d 100644 --- a/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi +++ b/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi @@ -994,11 +994,17 @@ id = <0>; blocks = <0x5>; irq-trigger = <0x1>; + /* 3.25 MHz ADC clock speed */ + st,adc-freq = <1>; + /* 12-bit ADC */ + st,mod-12b = <1>; + /* internal ADC reference */ + st,ref-sel = <0>; + /* ADC converstion time: 80 clocks */ + st,sample-time = <4>; stmpe_touchscreen { compatible = "st,stmpe-ts"; - /* 3.25 MHz ADC clock speed */ - st,adc-freq = <1>; /* 8 sample average control */ st,ave-ctrl = <3>; /* 7 length fractional part in z */ @@ -1008,17 +1014,17 @@ * current limit value */ st,i-drive = <1>; - /* 12-bit ADC */ - st,mod-12b = <1>; - /* internal ADC reference */ - st,ref-sel = <0>; - /* ADC converstion time: 80 clocks */ - st,sample-time = <4>; /* 1 ms panel driver settling time */ st,settling = <3>; /* 5 ms touch detect interrupt delay */ st,touch-det-delay = <5>; }; + + stmpe_adc { + compatible = "st,stmpe-adc"; + /* forbid to use ADC channels 3-0 (touch) */ + st,norequest-mask = <0x0F>; + }; }; /* diff --git a/arch/arm/boot/dts/tegra30-apalis.dtsi b/arch/arm/boot/dts/tegra30-apalis.dtsi index 7f112f192fe9..c18f6f61d764 100644 --- a/arch/arm/boot/dts/tegra30-apalis.dtsi +++ b/arch/arm/boot/dts/tegra30-apalis.dtsi @@ -976,11 +976,17 @@ id = <0>; blocks = <0x5>; irq-trigger = <0x1>; + /* 3.25 MHz ADC clock speed */ + st,adc-freq = <1>; + /* 12-bit ADC */ + st,mod-12b = <1>; + /* internal ADC reference */ + st,ref-sel = <0>; + /* ADC converstion time: 80 clocks */ + st,sample-time = <4>; stmpe_touchscreen { compatible = "st,stmpe-ts"; - /* 3.25 MHz ADC clock speed */ - st,adc-freq = <1>; /* 8 sample average control */ st,ave-ctrl = <3>; /* 7 length fractional part in z */ @@ -990,17 +996,17 @@ * current limit value */ st,i-drive = <1>; - /* 12-bit ADC */ - st,mod-12b = <1>; - /* internal ADC reference */ - st,ref-sel = <0>; - /* ADC converstion time: 80 clocks */ - st,sample-time = <4>; /* 1 ms panel driver settling time */ st,settling = <3>; /* 5 ms touch detect interrupt delay */ st,touch-det-delay = <5>; }; + + stmpe_adc { + compatible = "st,stmpe-adc"; + /* forbid to use ADC channels 3-0 (touch) */ + st,norequest-mask = <0x0F>; + }; }; /* diff --git a/arch/arm/boot/dts/tegra30-cardhu-a04.dts b/arch/arm/boot/dts/tegra30-cardhu-a04.dts index 4dbd4af679f0..9234988624ec 100644 --- a/arch/arm/boot/dts/tegra30-cardhu-a04.dts +++ b/arch/arm/boot/dts/tegra30-cardhu-a04.dts @@ -2,6 +2,8 @@ /dts-v1/; #include "tegra30-cardhu.dtsi" +#include "tegra30-cpu-opp.dtsi" +#include "tegra30-cpu-opp-microvolt.dtsi" /* This dts file support the cardhu A04 and later versions of board */ @@ -103,4 +105,50 @@ gpio = <&gpio TEGRA_GPIO(DD, 0) GPIO_ACTIVE_HIGH>; }; }; + + i2c@7000d000 { + pmic: tps65911@2d { + regulators { + vddctrl_reg: vddctrl { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1125000>; + regulator-coupled-with = <&vddcore_reg>; + regulator-coupled-max-spread = <300000>; + regulator-max-step-microvolt = <100000>; + + nvidia,tegra-cpu-regulator; + }; + }; + }; + + vddcore_reg: tps62361@60 { + regulator-coupled-with = <&vddctrl_reg>; + regulator-coupled-max-spread = <300000>; + regulator-max-step-microvolt = <100000>; + + nvidia,tegra-core-regulator; + }; + }; + + cpus { + cpu0: cpu@0 { + cpu-supply = <&vddctrl_reg>; + operating-points-v2 = <&cpu0_opp_table>; + }; + + cpu@1 { + cpu-supply = <&vddctrl_reg>; + operating-points-v2 = <&cpu0_opp_table>; + }; + + cpu@2 { + cpu-supply = <&vddctrl_reg>; + operating-points-v2 = <&cpu0_opp_table>; + }; + + cpu@3 { + cpu-supply = <&vddctrl_reg>; + operating-points-v2 = <&cpu0_opp_table>; + }; + }; }; diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi index 35af03ca9e90..1f9198bb24ff 100644 --- a/arch/arm/boot/dts/tegra30-colibri.dtsi +++ b/arch/arm/boot/dts/tegra30-colibri.dtsi @@ -845,11 +845,18 @@ id = <0>; blocks = <0x5>; irq-trigger = <0x1>; + /* 3.25 MHz ADC clock speed */ + st,adc-freq = <1>; + /* 12-bit ADC */ + st,mod-12b = <1>; + /* internal ADC reference */ + st,ref-sel = <0>; + /* ADC converstion time: 80 clocks */ + st,sample-time = <4>; + /* forbid to use ADC channels 3-0 (touch) */ stmpe_touchscreen { compatible = "st,stmpe-ts"; - /* 3.25 MHz ADC clock speed */ - st,adc-freq = <1>; /* 8 sample average control */ st,ave-ctrl = <3>; /* 7 length fractional part in z */ @@ -859,17 +866,16 @@ * current limit value */ st,i-drive = <1>; - /* 12-bit ADC */ - st,mod-12b = <1>; - /* internal ADC reference */ - st,ref-sel = <0>; - /* ADC converstion time: 80 clocks */ - st,sample-time = <4>; /* 1 ms panel driver settling time */ st,settling = <3>; /* 5 ms touch detect interrupt delay */ st,touch-det-delay = <5>; }; + + stmpe_adc { + compatible = "st,stmpe-adc"; + st,norequest-mask = <0x0F>; + }; }; /* diff --git a/arch/arm/boot/dts/tegra30-cpu-opp-microvolt.dtsi b/arch/arm/boot/dts/tegra30-cpu-opp-microvolt.dtsi new file mode 100644 index 000000000000..5c40ef49894f --- /dev/null +++ b/arch/arm/boot/dts/tegra30-cpu-opp-microvolt.dtsi @@ -0,0 +1,801 @@ +// SPDX-License-Identifier: GPL-2.0 + +/ { + cpu0_opp_table: cpu_opp_table0 { + opp@51000000_800 { + opp-microvolt = <800000 800000 1250000>; + }; + + opp@51000000_850 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@51000000_912 { + opp-microvolt = <912000 912000 1250000>; + }; + + opp@102000000_800 { + opp-microvolt = <800000 800000 1250000>; + }; + + opp@102000000_850 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@102000000_912 { + opp-microvolt = <912000 912000 1250000>; + }; + + opp@204000000_800 { + opp-microvolt = <800000 800000 1250000>; + }; + + opp@204000000_850 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@204000000_912 { + opp-microvolt = <912000 912000 1250000>; + }; + + opp@312000000_850 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@312000000_912 { + opp-microvolt = <912000 912000 1250000>; + }; + + opp@340000000_800 { + opp-microvolt = <800000 800000 1250000>; + }; + + opp@340000000_850 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@370000000_800 { + opp-microvolt = <800000 800000 1250000>; + }; + + opp@456000000_850 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@456000000_912 { + opp-microvolt = <912000 912000 1250000>; + }; + + opp@475000000_800 { + opp-microvolt = <800000 800000 1250000>; + }; + + opp@475000000_850 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@475000000_850_0_1 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@475000000_850_0_4 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@475000000_850_0_7 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@475000000_850_0_8 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@608000000_850 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@608000000_912 { + opp-microvolt = <912000 912000 1250000>; + }; + + opp@620000000_850 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@640000000_850 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@640000000_850_1_1 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@640000000_850_2_1 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@640000000_850_3_1 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@640000000_850_1_4 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@640000000_850_2_4 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@640000000_850_3_4 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@640000000_850_1_7 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@640000000_850_2_7 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@640000000_850_3_7 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@640000000_850_4_7 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@640000000_850_1_8 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@640000000_850_2_8 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@640000000_850_3_8 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@640000000_850_4_8 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@640000000_900 { + opp-microvolt = <900000 900000 1250000>; + }; + + opp@760000000_850 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@760000000_850_3_1 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@760000000_850_3_2 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@760000000_850_3_3 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@760000000_850_3_4 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@760000000_850_3_7 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@760000000_850_4_7 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@760000000_850_3_8 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@760000000_850_4_8 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@760000000_850_0_10 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@760000000_900 { + opp-microvolt = <900000 900000 1250000>; + }; + + opp@760000000_900_1_1 { + opp-microvolt = <900000 900000 1250000>; + }; + + opp@760000000_900_2_1 { + opp-microvolt = <900000 900000 1250000>; + }; + + opp@760000000_900_1_2 { + opp-microvolt = <900000 900000 1250000>; + }; + + opp@760000000_900_2_2 { + opp-microvolt = <900000 900000 1250000>; + }; + + opp@760000000_900_1_3 { + opp-microvolt = <900000 900000 1250000>; + }; + + opp@760000000_900_2_3 { + opp-microvolt = <900000 900000 1250000>; + }; + + opp@760000000_900_1_4 { + opp-microvolt = <900000 900000 1250000>; + }; + + opp@760000000_900_2_4 { + opp-microvolt = <900000 900000 1250000>; + }; + + opp@760000000_900_1_7 { + opp-microvolt = <900000 900000 1250000>; + }; + + opp@760000000_900_2_7 { + opp-microvolt = <900000 900000 1250000>; + }; + + opp@760000000_900_1_8 { + opp-microvolt = <900000 900000 1250000>; + }; + + opp@760000000_900_2_8 { + opp-microvolt = <900000 900000 1250000>; + }; + + opp@760000000_912 { + opp-microvolt = <912000 912000 1250000>; + }; + + opp@760000000_975 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@816000000_850 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@816000000_912 { + opp-microvolt = <912000 912000 1250000>; + }; + + opp@860000000_850 { + opp-microvolt = <850000 850000 1250000>; + }; + + opp@860000000_900 { + opp-microvolt = <900000 900000 1250000>; + }; + + opp@860000000_900_2_1 { + opp-microvolt = <900000 900000 1250000>; + }; + + opp@860000000_900_3_1 { + opp-microvolt = <900000 900000 1250000>; + }; + + opp@860000000_900_2_2 { + opp-microvolt = <900000 900000 1250000>; + }; + + opp@860000000_900_3_2 { + opp-microvolt = <900000 900000 1250000>; + }; + + opp@860000000_900_2_3 { + opp-microvolt = <900000 900000 1250000>; + }; + + opp@860000000_900_3_3 { + opp-microvolt = <900000 900000 1250000>; + }; + + opp@860000000_900_2_4 { + opp-microvolt = <900000 900000 1250000>; + }; + + opp@860000000_900_3_4 { + opp-microvolt = <900000 900000 1250000>; + }; + + opp@860000000_900_2_7 { + opp-microvolt = <900000 900000 1250000>; + }; + + opp@860000000_900_3_7 { + opp-microvolt = <900000 900000 1250000>; + }; + + opp@860000000_900_4_7 { + opp-microvolt = <900000 900000 1250000>; + }; + + opp@860000000_900_2_8 { + opp-microvolt = <900000 900000 1250000>; + }; + + opp@860000000_900_3_8 { + opp-microvolt = <900000 900000 1250000>; + }; + + opp@860000000_900_4_8 { + opp-microvolt = <900000 900000 1250000>; + }; + + opp@860000000_975 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@860000000_975_1_1 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@860000000_975_1_2 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@860000000_975_1_3 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@860000000_975_1_4 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@860000000_975_1_7 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@860000000_975_1_8 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@860000000_1000 { + opp-microvolt = <1000000 1000000 1250000>; + }; + + opp@910000000_900 { + opp-microvolt = <900000 900000 1250000>; + }; + + opp@1000000000_900 { + opp-microvolt = <900000 900000 1250000>; + }; + + opp@1000000000_975 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@1000000000_975_2_1 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@1000000000_975_3_1 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@1000000000_975_2_2 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@1000000000_975_3_2 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@1000000000_975_2_3 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@1000000000_975_3_3 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@1000000000_975_2_4 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@1000000000_975_3_4 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@1000000000_975_2_7 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@1000000000_975_3_7 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@1000000000_975_4_7 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@1000000000_975_2_8 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@1000000000_975_3_8 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@1000000000_975_4_8 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@1000000000_1000 { + opp-microvolt = <1000000 1000000 1250000>; + }; + + opp@1000000000_1025 { + opp-microvolt = <1025000 1025000 1250000>; + }; + + opp@1100000000_900 { + opp-microvolt = <900000 900000 1250000>; + }; + + opp@1100000000_975 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@1100000000_975_3_1 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@1100000000_975_3_2 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@1100000000_975_3_3 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@1100000000_975_3_4 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@1100000000_975_3_7 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@1100000000_975_4_7 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@1100000000_975_3_8 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@1100000000_975_4_8 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@1100000000_1000 { + opp-microvolt = <1000000 1000000 1250000>; + }; + + opp@1100000000_1000_2_1 { + opp-microvolt = <1000000 1000000 1250000>; + }; + + opp@1100000000_1000_2_2 { + opp-microvolt = <1000000 1000000 1250000>; + }; + + opp@1100000000_1000_2_3 { + opp-microvolt = <1000000 1000000 1250000>; + }; + + opp@1100000000_1000_2_4 { + opp-microvolt = <1000000 1000000 1250000>; + }; + + opp@1100000000_1000_2_7 { + opp-microvolt = <1000000 1000000 1250000>; + }; + + opp@1100000000_1000_2_8 { + opp-microvolt = <1000000 1000000 1250000>; + }; + + opp@1100000000_1025 { + opp-microvolt = <1025000 1025000 1250000>; + }; + + opp@1100000000_1075 { + opp-microvolt = <1075000 1075000 1250000>; + }; + + opp@1150000000_975 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@1200000000_975 { + opp-microvolt = <975000 975000 1250000>; + }; + + opp@1200000000_1000 { + opp-microvolt = <1000000 1000000 1250000>; + }; + + opp@1200000000_1000_3_1 { + opp-microvolt = <1000000 1000000 1250000>; + }; + + opp@1200000000_1000_3_2 { + opp-microvolt = <1000000 1000000 1250000>; + }; + + opp@1200000000_1000_3_3 { + opp-microvolt = <1000000 1000000 1250000>; + }; + + opp@1200000000_1000_3_4 { + opp-microvolt = <1000000 1000000 1250000>; + }; + + opp@1200000000_1000_3_7 { + opp-microvolt = <1000000 1000000 1250000>; + }; + + opp@1200000000_1000_4_7 { + opp-microvolt = <1000000 1000000 1250000>; + }; + + opp@1200000000_1000_3_8 { + opp-microvolt = <1000000 1000000 1250000>; + }; + + opp@1200000000_1000_4_8 { + opp-microvolt = <1000000 1000000 1250000>; + }; + + opp@1200000000_1025 { + opp-microvolt = <1025000 1025000 1250000>; + }; + + opp@1200000000_1025_2_1 { + opp-microvolt = <1025000 1025000 1250000>; + }; + + opp@1200000000_1025_2_2 { + opp-microvolt = <1025000 1025000 1250000>; + }; + + opp@1200000000_1025_2_3 { + opp-microvolt = <1025000 1025000 1250000>; + }; + + opp@1200000000_1025_2_4 { + opp-microvolt = <1025000 1025000 1250000>; + }; + + opp@1200000000_1025_2_7 { + opp-microvolt = <1025000 1025000 1250000>; + }; + + opp@1200000000_1025_2_8 { + opp-microvolt = <1025000 1025000 1250000>; + }; + + opp@1200000000_1050 { + opp-microvolt = <1050000 1050000 1250000>; + }; + + opp@1200000000_1075 { + opp-microvolt = <1075000 1075000 1250000>; + }; + + opp@1200000000_1100 { + opp-microvolt = <1100000 1100000 1250000>; + }; + + opp@1300000000_1000 { + opp-microvolt = <1000000 1000000 1250000>; + }; + + opp@1300000000_1000_4_7 { + opp-microvolt = <1000000 1000000 1250000>; + }; + + opp@1300000000_1000_4_8 { + opp-microvolt = <1000000 1000000 1250000>; + }; + + opp@1300000000_1025 { + opp-microvolt = <1025000 1025000 1250000>; + }; + + opp@1300000000_1025_3_1 { + opp-microvolt = <1025000 1025000 1250000>; + }; + + opp@1300000000_1025_3_7 { + opp-microvolt = <1025000 1025000 1250000>; + }; + + opp@1300000000_1025_3_8 { + opp-microvolt = <1025000 1025000 1250000>; + }; + + opp@1300000000_1050 { + opp-microvolt = <1050000 1050000 1250000>; + }; + + opp@1300000000_1050_2_1 { + opp-microvolt = <1050000 1050000 1250000>; + }; + + opp@1300000000_1050_3_2 { + opp-microvolt = <1050000 1050000 1250000>; + }; + + opp@1300000000_1050_3_3 { + opp-microvolt = <1050000 1050000 1250000>; + }; + + opp@1300000000_1050_3_4 { + opp-microvolt = <1050000 1050000 1250000>; + }; + + opp@1300000000_1050_3_5 { + opp-microvolt = <1050000 1050000 1250000>; + }; + + opp@1300000000_1050_3_6 { + opp-microvolt = <1050000 1050000 1250000>; + }; + + opp@1300000000_1050_2_7 { + opp-microvolt = <1050000 1050000 1250000>; + }; + + opp@1300000000_1050_2_8 { + opp-microvolt = <1050000 1050000 1250000>; + }; + + opp@1300000000_1050_3_12 { + opp-microvolt = <1050000 1050000 1250000>; + }; + + opp@1300000000_1050_3_13 { + opp-microvolt = <1050000 1050000 1250000>; + }; + + opp@1300000000_1075 { + opp-microvolt = <1075000 1075000 1250000>; + }; + + opp@1300000000_1075_2_2 { + opp-microvolt = <1075000 1075000 1250000>; + }; + + opp@1300000000_1075_2_3 { + opp-microvolt = <1075000 1075000 1250000>; + }; + + opp@1300000000_1075_2_4 { + opp-microvolt = <1075000 1075000 1250000>; + }; + + opp@1300000000_1100 { + opp-microvolt = <1100000 1100000 1250000>; + }; + + opp@1300000000_1125 { + opp-microvolt = <1125000 1125000 1250000>; + }; + + opp@1300000000_1150 { + opp-microvolt = <1150000 1150000 1250000>; + }; + + opp@1300000000_1175 { + opp-microvolt = <1175000 1175000 1250000>; + }; + + opp@1400000000_1100 { + opp-microvolt = <1100000 1100000 1250000>; + }; + + opp@1400000000_1125 { + opp-microvolt = <1125000 1125000 1250000>; + }; + + opp@1400000000_1150 { + opp-microvolt = <1150000 1150000 1250000>; + }; + + opp@1400000000_1150_2_4 { + opp-microvolt = <1150000 1150000 1250000>; + }; + + opp@1400000000_1175 { + opp-microvolt = <1175000 1175000 1250000>; + }; + + opp@1400000000_1237 { + opp-microvolt = <1237000 1237000 1250000>; + }; + + opp@1500000000_1125 { + opp-microvolt = <1125000 1125000 1250000>; + }; + + opp@1500000000_1125_4_5 { + opp-microvolt = <1125000 1125000 1250000>; + }; + + opp@1500000000_1125_4_6 { + opp-microvolt = <1125000 1125000 1250000>; + }; + + opp@1500000000_1125_4_12 { + opp-microvolt = <1125000 1125000 1250000>; + }; + + opp@1500000000_1125_4_13 { + opp-microvolt = <1125000 1125000 1250000>; + }; + + opp@1500000000_1150 { + opp-microvolt = <1150000 1150000 1250000>; + }; + + opp@1500000000_1150_3_5 { + opp-microvolt = <1150000 1150000 1250000>; + }; + + opp@1500000000_1150_3_6 { + opp-microvolt = <1150000 1150000 1250000>; + }; + + opp@1500000000_1150_3_12 { + opp-microvolt = <1150000 1150000 1250000>; + }; + + opp@1500000000_1150_3_13 { + opp-microvolt = <1150000 1150000 1250000>; + }; + + opp@1500000000_1200 { + opp-microvolt = <1200000 1200000 1250000>; + }; + + opp@1500000000_1237 { + opp-microvolt = <1237000 1237000 1250000>; + }; + + opp@1600000000_1212 { + opp-microvolt = <1212000 1212000 1250000>; + }; + + opp@1600000000_1237 { + opp-microvolt = <1237000 1237000 1250000>; + }; + + opp@1700000000_1212 { + opp-microvolt = <1212000 1212000 1250000>; + }; + + opp@1700000000_1237 { + opp-microvolt = <1237000 1237000 1250000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/tegra30-cpu-opp.dtsi b/arch/arm/boot/dts/tegra30-cpu-opp.dtsi new file mode 100644 index 000000000000..d64fc262585e --- /dev/null +++ b/arch/arm/boot/dts/tegra30-cpu-opp.dtsi @@ -0,0 +1,1202 @@ +// SPDX-License-Identifier: GPL-2.0 + +/ { + cpu0_opp_table: cpu_opp_table0 { + compatible = "operating-points-v2"; + opp-shared; + + opp@51000000_800 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x1F 0x31FE>; + opp-hz = /bits/ 64 <51000000>; + }; + + opp@51000000_850 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x1F 0x0C01>; + opp-hz = /bits/ 64 <51000000>; + }; + + opp@51000000_912 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x1F 0x0200>; + opp-hz = /bits/ 64 <51000000>; + }; + + opp@102000000_800 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x1F 0x31FE>; + opp-hz = /bits/ 64 <102000000>; + }; + + opp@102000000_850 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x1F 0x0C01>; + opp-hz = /bits/ 64 <102000000>; + }; + + opp@102000000_912 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x1F 0x0200>; + opp-hz = /bits/ 64 <102000000>; + }; + + opp@204000000_800 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x1F 0x31FE>; + opp-hz = /bits/ 64 <204000000>; + }; + + opp@204000000_850 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x1F 0x0C01>; + opp-hz = /bits/ 64 <204000000>; + }; + + opp@204000000_912 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x1F 0x0200>; + opp-hz = /bits/ 64 <204000000>; + }; + + opp@312000000_850 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x1F 0x0C00>; + opp-hz = /bits/ 64 <312000000>; + }; + + opp@312000000_912 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x1F 0x0200>; + opp-hz = /bits/ 64 <312000000>; + }; + + opp@340000000_800 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x1F 0x0192>; + opp-hz = /bits/ 64 <340000000>; + }; + + opp@340000000_850 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x0F 0x0001>; + opp-hz = /bits/ 64 <340000000>; + }; + + opp@370000000_800 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x1E 0x306C>; + opp-hz = /bits/ 64 <370000000>; + }; + + opp@456000000_850 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x1F 0x0C00>; + opp-hz = /bits/ 64 <456000000>; + }; + + opp@456000000_912 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x1F 0x0200>; + opp-hz = /bits/ 64 <456000000>; + }; + + opp@475000000_800 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x1E 0x31FE>; + opp-hz = /bits/ 64 <475000000>; + }; + + opp@475000000_850 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x0F 0x0001>; + opp-hz = /bits/ 64 <475000000>; + }; + + opp@475000000_850_0_1 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x01 0x0002>; + opp-hz = /bits/ 64 <475000000>; + }; + + opp@475000000_850_0_4 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x01 0x0010>; + opp-hz = /bits/ 64 <475000000>; + }; + + opp@475000000_850_0_7 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x01 0x0080>; + opp-hz = /bits/ 64 <475000000>; + }; + + opp@475000000_850_0_8 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x01 0x0100>; + opp-hz = /bits/ 64 <475000000>; + }; + + opp@608000000_850 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x1F 0x0400>; + opp-hz = /bits/ 64 <608000000>; + }; + + opp@608000000_912 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x1F 0x0200>; + opp-hz = /bits/ 64 <608000000>; + }; + + opp@620000000_850 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x1E 0x306C>; + opp-hz = /bits/ 64 <620000000>; + }; + + opp@640000000_850 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x0F 0x0001>; + opp-hz = /bits/ 64 <640000000>; + }; + + opp@640000000_850_1_1 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x02 0x0002>; + opp-hz = /bits/ 64 <640000000>; + }; + + opp@640000000_850_2_1 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0002>; + opp-hz = /bits/ 64 <640000000>; + }; + + opp@640000000_850_3_1 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0002>; + opp-hz = /bits/ 64 <640000000>; + }; + + opp@640000000_850_1_4 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x02 0x0010>; + opp-hz = /bits/ 64 <640000000>; + }; + + opp@640000000_850_2_4 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0010>; + opp-hz = /bits/ 64 <640000000>; + }; + + opp@640000000_850_3_4 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0010>; + opp-hz = /bits/ 64 <640000000>; + }; + + opp@640000000_850_1_7 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x02 0x0080>; + opp-hz = /bits/ 64 <640000000>; + }; + + opp@640000000_850_2_7 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0080>; + opp-hz = /bits/ 64 <640000000>; + }; + + opp@640000000_850_3_7 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0080>; + opp-hz = /bits/ 64 <640000000>; + }; + + opp@640000000_850_4_7 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x10 0x0080>; + opp-hz = /bits/ 64 <640000000>; + }; + + opp@640000000_850_1_8 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x02 0x0100>; + opp-hz = /bits/ 64 <640000000>; + }; + + opp@640000000_850_2_8 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0100>; + opp-hz = /bits/ 64 <640000000>; + }; + + opp@640000000_850_3_8 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0100>; + opp-hz = /bits/ 64 <640000000>; + }; + + opp@640000000_850_4_8 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x10 0x0100>; + opp-hz = /bits/ 64 <640000000>; + }; + + opp@640000000_900 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x01 0x0192>; + opp-hz = /bits/ 64 <640000000>; + }; + + opp@760000000_850 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x1E 0x3461>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@760000000_850_3_1 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0002>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@760000000_850_3_2 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0004>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@760000000_850_3_3 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0008>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@760000000_850_3_4 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0010>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@760000000_850_3_7 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0080>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@760000000_850_4_7 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x10 0x0080>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@760000000_850_3_8 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0100>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@760000000_850_4_8 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x10 0x0100>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@760000000_850_0_10 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x01 0x0400>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@760000000_900 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x01 0x0001>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@760000000_900_1_1 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x02 0x0002>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@760000000_900_2_1 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0002>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@760000000_900_1_2 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x02 0x0004>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@760000000_900_2_2 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0004>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@760000000_900_1_3 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x02 0x0008>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@760000000_900_2_3 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0008>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@760000000_900_1_4 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x02 0x0010>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@760000000_900_2_4 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0010>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@760000000_900_1_7 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x02 0x0080>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@760000000_900_2_7 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0080>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@760000000_900_1_8 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x02 0x0100>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@760000000_900_2_8 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0100>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@760000000_912 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x1F 0x0200>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@760000000_975 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x01 0x0192>; + opp-hz = /bits/ 64 <760000000>; + }; + + opp@816000000_850 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x1F 0x0400>; + opp-hz = /bits/ 64 <816000000>; + }; + + opp@816000000_912 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x1F 0x0200>; + opp-hz = /bits/ 64 <816000000>; + }; + + opp@860000000_850 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x0C 0x0001>; + opp-hz = /bits/ 64 <860000000>; + }; + + opp@860000000_900 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x02 0x0001>; + opp-hz = /bits/ 64 <860000000>; + }; + + opp@860000000_900_2_1 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0002>; + opp-hz = /bits/ 64 <860000000>; + }; + + opp@860000000_900_3_1 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0002>; + opp-hz = /bits/ 64 <860000000>; + }; + + opp@860000000_900_2_2 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0004>; + opp-hz = /bits/ 64 <860000000>; + }; + + opp@860000000_900_3_2 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0004>; + opp-hz = /bits/ 64 <860000000>; + }; + + opp@860000000_900_2_3 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0008>; + opp-hz = /bits/ 64 <860000000>; + }; + + opp@860000000_900_3_3 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0008>; + opp-hz = /bits/ 64 <860000000>; + }; + + opp@860000000_900_2_4 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0010>; + opp-hz = /bits/ 64 <860000000>; + }; + + opp@860000000_900_3_4 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0010>; + opp-hz = /bits/ 64 <860000000>; + }; + + opp@860000000_900_2_7 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0080>; + opp-hz = /bits/ 64 <860000000>; + }; + + opp@860000000_900_3_7 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0080>; + opp-hz = /bits/ 64 <860000000>; + }; + + opp@860000000_900_4_7 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x10 0x0080>; + opp-hz = /bits/ 64 <860000000>; + }; + + opp@860000000_900_2_8 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0100>; + opp-hz = /bits/ 64 <860000000>; + }; + + opp@860000000_900_3_8 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0100>; + opp-hz = /bits/ 64 <860000000>; + }; + + opp@860000000_900_4_8 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x10 0x0100>; + opp-hz = /bits/ 64 <860000000>; + }; + + opp@860000000_975 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x01 0x0001>; + opp-hz = /bits/ 64 <860000000>; + }; + + opp@860000000_975_1_1 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x02 0x0002>; + opp-hz = /bits/ 64 <860000000>; + }; + + opp@860000000_975_1_2 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x02 0x0004>; + opp-hz = /bits/ 64 <860000000>; + }; + + opp@860000000_975_1_3 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x02 0x0008>; + opp-hz = /bits/ 64 <860000000>; + }; + + opp@860000000_975_1_4 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x02 0x0010>; + opp-hz = /bits/ 64 <860000000>; + }; + + opp@860000000_975_1_7 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x02 0x0080>; + opp-hz = /bits/ 64 <860000000>; + }; + + opp@860000000_975_1_8 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x02 0x0100>; + opp-hz = /bits/ 64 <860000000>; + }; + + opp@860000000_1000 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x01 0x0192>; + opp-hz = /bits/ 64 <860000000>; + }; + + opp@910000000_900 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x18 0x3060>; + opp-hz = /bits/ 64 <910000000>; + }; + + opp@1000000000_900 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x0C 0x0001>; + opp-hz = /bits/ 64 <1000000000>; + }; + + opp@1000000000_975 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x03 0x0001>; + opp-hz = /bits/ 64 <1000000000>; + }; + + opp@1000000000_975_2_1 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0002>; + opp-hz = /bits/ 64 <1000000000>; + }; + + opp@1000000000_975_3_1 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0002>; + opp-hz = /bits/ 64 <1000000000>; + }; + + opp@1000000000_975_2_2 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0004>; + opp-hz = /bits/ 64 <1000000000>; + }; + + opp@1000000000_975_3_2 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0004>; + opp-hz = /bits/ 64 <1000000000>; + }; + + opp@1000000000_975_2_3 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0008>; + opp-hz = /bits/ 64 <1000000000>; + }; + + opp@1000000000_975_3_3 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0008>; + opp-hz = /bits/ 64 <1000000000>; + }; + + opp@1000000000_975_2_4 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0010>; + opp-hz = /bits/ 64 <1000000000>; + }; + + opp@1000000000_975_3_4 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0010>; + opp-hz = /bits/ 64 <1000000000>; + }; + + opp@1000000000_975_2_7 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0080>; + opp-hz = /bits/ 64 <1000000000>; + }; + + opp@1000000000_975_3_7 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0080>; + opp-hz = /bits/ 64 <1000000000>; + }; + + opp@1000000000_975_4_7 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x10 0x0080>; + opp-hz = /bits/ 64 <1000000000>; + }; + + opp@1000000000_975_2_8 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0100>; + opp-hz = /bits/ 64 <1000000000>; + }; + + opp@1000000000_975_3_8 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0100>; + opp-hz = /bits/ 64 <1000000000>; + }; + + opp@1000000000_975_4_8 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x10 0x0100>; + opp-hz = /bits/ 64 <1000000000>; + }; + + opp@1000000000_1000 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x02 0x019E>; + opp-hz = /bits/ 64 <1000000000>; + }; + + opp@1000000000_1025 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x01 0x0192>; + opp-hz = /bits/ 64 <1000000000>; + }; + + opp@1100000000_900 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0001>; + opp-hz = /bits/ 64 <1100000000>; + }; + + opp@1100000000_975 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x06 0x0001>; + opp-hz = /bits/ 64 <1100000000>; + }; + + opp@1100000000_975_3_1 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0002>; + opp-hz = /bits/ 64 <1100000000>; + }; + + opp@1100000000_975_3_2 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0004>; + opp-hz = /bits/ 64 <1100000000>; + }; + + opp@1100000000_975_3_3 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0008>; + opp-hz = /bits/ 64 <1100000000>; + }; + + opp@1100000000_975_3_4 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0010>; + opp-hz = /bits/ 64 <1100000000>; + }; + + opp@1100000000_975_3_7 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0080>; + opp-hz = /bits/ 64 <1100000000>; + }; + + opp@1100000000_975_4_7 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x10 0x0080>; + opp-hz = /bits/ 64 <1100000000>; + }; + + opp@1100000000_975_3_8 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0100>; + opp-hz = /bits/ 64 <1100000000>; + }; + + opp@1100000000_975_4_8 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x10 0x0100>; + opp-hz = /bits/ 64 <1100000000>; + }; + + opp@1100000000_1000 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x01 0x0001>; + opp-hz = /bits/ 64 <1100000000>; + }; + + opp@1100000000_1000_2_1 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0002>; + opp-hz = /bits/ 64 <1100000000>; + }; + + opp@1100000000_1000_2_2 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0004>; + opp-hz = /bits/ 64 <1100000000>; + }; + + opp@1100000000_1000_2_3 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0008>; + opp-hz = /bits/ 64 <1100000000>; + }; + + opp@1100000000_1000_2_4 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0010>; + opp-hz = /bits/ 64 <1100000000>; + }; + + opp@1100000000_1000_2_7 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0080>; + opp-hz = /bits/ 64 <1100000000>; + }; + + opp@1100000000_1000_2_8 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0100>; + opp-hz = /bits/ 64 <1100000000>; + }; + + opp@1100000000_1025 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x02 0x019E>; + opp-hz = /bits/ 64 <1100000000>; + }; + + opp@1100000000_1075 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x01 0x0192>; + opp-hz = /bits/ 64 <1100000000>; + }; + + opp@1150000000_975 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x18 0x3060>; + opp-hz = /bits/ 64 <1150000000>; + }; + + opp@1200000000_975 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0001>; + opp-hz = /bits/ 64 <1200000000>; + }; + + opp@1200000000_1000 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0001>; + opp-hz = /bits/ 64 <1200000000>; + }; + + opp@1200000000_1000_3_1 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0002>; + opp-hz = /bits/ 64 <1200000000>; + }; + + opp@1200000000_1000_3_2 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0004>; + opp-hz = /bits/ 64 <1200000000>; + }; + + opp@1200000000_1000_3_3 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0008>; + opp-hz = /bits/ 64 <1200000000>; + }; + + opp@1200000000_1000_3_4 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0010>; + opp-hz = /bits/ 64 <1200000000>; + }; + + opp@1200000000_1000_3_7 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0080>; + opp-hz = /bits/ 64 <1200000000>; + }; + + opp@1200000000_1000_4_7 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x10 0x0080>; + opp-hz = /bits/ 64 <1200000000>; + }; + + opp@1200000000_1000_3_8 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0100>; + opp-hz = /bits/ 64 <1200000000>; + }; + + opp@1200000000_1000_4_8 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x10 0x0100>; + opp-hz = /bits/ 64 <1200000000>; + }; + + opp@1200000000_1025 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x02 0x0001>; + opp-hz = /bits/ 64 <1200000000>; + }; + + opp@1200000000_1025_2_1 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0002>; + opp-hz = /bits/ 64 <1200000000>; + }; + + opp@1200000000_1025_2_2 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0004>; + opp-hz = /bits/ 64 <1200000000>; + }; + + opp@1200000000_1025_2_3 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0008>; + opp-hz = /bits/ 64 <1200000000>; + }; + + opp@1200000000_1025_2_4 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0010>; + opp-hz = /bits/ 64 <1200000000>; + }; + + opp@1200000000_1025_2_7 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0080>; + opp-hz = /bits/ 64 <1200000000>; + }; + + opp@1200000000_1025_2_8 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0100>; + opp-hz = /bits/ 64 <1200000000>; + }; + + opp@1200000000_1050 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x02 0x019E>; + opp-hz = /bits/ 64 <1200000000>; + }; + + opp@1200000000_1075 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x01 0x0001>; + opp-hz = /bits/ 64 <1200000000>; + }; + + opp@1200000000_1100 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x01 0x0192>; + opp-hz = /bits/ 64 <1200000000>; + }; + + opp@1300000000_1000 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0001>; + opp-hz = /bits/ 64 <1300000000>; + }; + + opp@1300000000_1000_4_7 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x10 0x0080>; + opp-hz = /bits/ 64 <1300000000>; + }; + + opp@1300000000_1000_4_8 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x10 0x0100>; + opp-hz = /bits/ 64 <1300000000>; + }; + + opp@1300000000_1025 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0001>; + opp-hz = /bits/ 64 <1300000000>; + }; + + opp@1300000000_1025_3_1 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0002>; + opp-hz = /bits/ 64 <1300000000>; + }; + + opp@1300000000_1025_3_7 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0080>; + opp-hz = /bits/ 64 <1300000000>; + }; + + opp@1300000000_1025_3_8 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0100>; + opp-hz = /bits/ 64 <1300000000>; + }; + + opp@1300000000_1050 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x12 0x3061>; + opp-hz = /bits/ 64 <1300000000>; + }; + + opp@1300000000_1050_2_1 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0002>; + opp-hz = /bits/ 64 <1300000000>; + }; + + opp@1300000000_1050_3_2 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0004>; + opp-hz = /bits/ 64 <1300000000>; + }; + + opp@1300000000_1050_3_3 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0008>; + opp-hz = /bits/ 64 <1300000000>; + }; + + opp@1300000000_1050_3_4 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0010>; + opp-hz = /bits/ 64 <1300000000>; + }; + + opp@1300000000_1050_3_5 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0020>; + opp-hz = /bits/ 64 <1300000000>; + }; + + opp@1300000000_1050_3_6 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0040>; + opp-hz = /bits/ 64 <1300000000>; + }; + + opp@1300000000_1050_2_7 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0080>; + opp-hz = /bits/ 64 <1300000000>; + }; + + opp@1300000000_1050_2_8 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0100>; + opp-hz = /bits/ 64 <1300000000>; + }; + + opp@1300000000_1050_3_12 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x1000>; + opp-hz = /bits/ 64 <1300000000>; + }; + + opp@1300000000_1050_3_13 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x2000>; + opp-hz = /bits/ 64 <1300000000>; + }; + + opp@1300000000_1075 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x02 0x0182>; + opp-hz = /bits/ 64 <1300000000>; + }; + + opp@1300000000_1075_2_2 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0004>; + opp-hz = /bits/ 64 <1300000000>; + }; + + opp@1300000000_1075_2_3 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0008>; + opp-hz = /bits/ 64 <1300000000>; + }; + + opp@1300000000_1075_2_4 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0010>; + opp-hz = /bits/ 64 <1300000000>; + }; + + opp@1300000000_1100 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x02 0x001C>; + opp-hz = /bits/ 64 <1300000000>; + }; + + opp@1300000000_1125 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x01 0x0001>; + opp-hz = /bits/ 64 <1300000000>; + }; + + opp@1300000000_1150 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x01 0x0182>; + opp-hz = /bits/ 64 <1300000000>; + }; + + opp@1300000000_1175 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x01 0x0010>; + opp-hz = /bits/ 64 <1300000000>; + }; + + opp@1400000000_1100 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x18 0x307C>; + opp-hz = /bits/ 64 <1400000000>; + }; + + opp@1400000000_1125 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x000C>; + opp-hz = /bits/ 64 <1400000000>; + }; + + opp@1400000000_1150 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x02 0x000C>; + opp-hz = /bits/ 64 <1400000000>; + }; + + opp@1400000000_1150_2_4 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0010>; + opp-hz = /bits/ 64 <1400000000>; + }; + + opp@1400000000_1175 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x02 0x0010>; + opp-hz = /bits/ 64 <1400000000>; + }; + + opp@1400000000_1237 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x01 0x0010>; + opp-hz = /bits/ 64 <1400000000>; + }; + + opp@1500000000_1125 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0010>; + opp-hz = /bits/ 64 <1500000000>; + }; + + opp@1500000000_1125_4_5 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x10 0x0020>; + opp-hz = /bits/ 64 <1500000000>; + }; + + opp@1500000000_1125_4_6 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x10 0x0040>; + opp-hz = /bits/ 64 <1500000000>; + }; + + opp@1500000000_1125_4_12 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x10 0x1000>; + opp-hz = /bits/ 64 <1500000000>; + }; + + opp@1500000000_1125_4_13 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x10 0x2000>; + opp-hz = /bits/ 64 <1500000000>; + }; + + opp@1500000000_1150 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x04 0x0010>; + opp-hz = /bits/ 64 <1500000000>; + }; + + opp@1500000000_1150_3_5 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0020>; + opp-hz = /bits/ 64 <1500000000>; + }; + + opp@1500000000_1150_3_6 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x0040>; + opp-hz = /bits/ 64 <1500000000>; + }; + + opp@1500000000_1150_3_12 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x1000>; + opp-hz = /bits/ 64 <1500000000>; + }; + + opp@1500000000_1150_3_13 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x2000>; + opp-hz = /bits/ 64 <1500000000>; + }; + + opp@1500000000_1200 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x02 0x0010>; + opp-hz = /bits/ 64 <1500000000>; + }; + + opp@1500000000_1237 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x01 0x0010>; + opp-hz = /bits/ 64 <1500000000>; + }; + + opp@1600000000_1212 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x10 0x3060>; + opp-hz = /bits/ 64 <1600000000>; + }; + + opp@1600000000_1237 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x3060>; + opp-hz = /bits/ 64 <1600000000>; + }; + + opp@1700000000_1212 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x10 0x3060>; + opp-hz = /bits/ 64 <1700000000>; + }; + + opp@1700000000_1237 { + clock-latency-ns = <100000>; + opp-supported-hw = <0x08 0x3060>; + opp-hz = /bits/ 64 <1700000000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index e074258d4518..55ae050042ce 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -422,6 +422,7 @@ clocks = <&tegra_car TEGRA30_CLK_VDE>; reset-names = "vde", "mc"; resets = <&tegra_car 61>, <&mc TEGRA30_MC_RESET_VDE>; + iommus = <&mc TEGRA_SWGROUP_VDE>; }; apbmisc@70000800 { @@ -732,6 +733,15 @@ #reset-cells = <1>; }; + memory-controller@7000f400 { + compatible = "nvidia,tegra30-emc"; + reg = <0x7000f400 0x400>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA30_CLK_EMC>; + + nvidia,memory-controller = <&mc>; + }; + fuse@7000f800 { compatible = "nvidia,tegra30-efuse"; reg = <0x7000f800 0x400>; @@ -997,24 +1007,28 @@ device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0>; + clocks = <&tegra_car TEGRA30_CLK_CCLK_G>; }; cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <1>; + clocks = <&tegra_car TEGRA30_CLK_CCLK_G>; }; cpu@2 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <2>; + clocks = <&tegra_car TEGRA30_CLK_CCLK_G>; }; cpu@3 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <3>; + clocks = <&tegra_car TEGRA30_CLK_CCLK_G>; }; }; diff --git a/arch/arm/boot/dts/uniphier-ld4.dtsi b/arch/arm/boot/dts/uniphier-ld4.dtsi index 58cd4e8fa5be..64ec46c72a4c 100644 --- a/arch/arm/boot/dts/uniphier-ld4.dtsi +++ b/arch/arm/boot/dts/uniphier-ld4.dtsi @@ -410,7 +410,8 @@ pinctrl-0 = <&pinctrl_nand>; clock-names = "nand", "nand_x", "ecc"; clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>; - resets = <&sys_rst 2>; + reset-names = "nand", "reg"; + resets = <&sys_rst 2>, <&sys_rst 2>; }; }; }; diff --git a/arch/arm/boot/dts/uniphier-pinctrl.dtsi b/arch/arm/boot/dts/uniphier-pinctrl.dtsi index 1fee5ffbfb9c..bfdfb764b25b 100644 --- a/arch/arm/boot/dts/uniphier-pinctrl.dtsi +++ b/arch/arm/boot/dts/uniphier-pinctrl.dtsi @@ -106,6 +106,16 @@ function = "i2c4"; }; + pinctrl_i2c5: i2c5 { + groups = "i2c5"; + function = "i2c5"; + }; + + pinctrl_i2c6: i2c6 { + groups = "i2c6"; + function = "i2c6"; + }; + pinctrl_nand: nand { groups = "nand"; function = "nand"; diff --git a/arch/arm/boot/dts/uniphier-pro4.dtsi b/arch/arm/boot/dts/uniphier-pro4.dtsi index 7f64e5a616d6..2ec04d7972ef 100644 --- a/arch/arm/boot/dts/uniphier-pro4.dtsi +++ b/arch/arm/boot/dts/uniphier-pro4.dtsi @@ -600,7 +600,8 @@ pinctrl-0 = <&pinctrl_nand>; clock-names = "nand", "nand_x", "ecc"; clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>; - resets = <&sys_rst 2>; + reset-names = "nand", "reg"; + resets = <&sys_rst 2>, <&sys_rst 2>; }; }; }; diff --git a/arch/arm/boot/dts/uniphier-pro5.dtsi b/arch/arm/boot/dts/uniphier-pro5.dtsi index eff74717b37c..ea3961f920a0 100644 --- a/arch/arm/boot/dts/uniphier-pro5.dtsi +++ b/arch/arm/boot/dts/uniphier-pro5.dtsi @@ -465,7 +465,8 @@ pinctrl-0 = <&pinctrl_nand>; clock-names = "nand", "nand_x", "ecc"; clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>; - resets = <&sys_rst 2>; + reset-names = "nand", "reg"; + resets = <&sys_rst 2>, <&sys_rst 2>; }; emmc: sdhc@68400000 { diff --git a/arch/arm/boot/dts/uniphier-pxs2.dtsi b/arch/arm/boot/dts/uniphier-pxs2.dtsi index 4eddbb8d7fca..13b0d4a7741f 100644 --- a/arch/arm/boot/dts/uniphier-pxs2.dtsi +++ b/arch/arm/boot/dts/uniphier-pxs2.dtsi @@ -773,7 +773,8 @@ pinctrl-0 = <&pinctrl_nand>; clock-names = "nand", "nand_x", "ecc"; clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>; - resets = <&sys_rst 2>; + reset-names = "nand", "reg"; + resets = <&sys_rst 2>, <&sys_rst 2>; }; }; }; diff --git a/arch/arm/boot/dts/uniphier-sld8.dtsi b/arch/arm/boot/dts/uniphier-sld8.dtsi index cbebb6e4c616..4fc6676f5486 100644 --- a/arch/arm/boot/dts/uniphier-sld8.dtsi +++ b/arch/arm/boot/dts/uniphier-sld8.dtsi @@ -414,7 +414,8 @@ pinctrl-0 = <&pinctrl_nand>; clock-names = "nand", "nand_x", "ecc"; clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>; - resets = <&sys_rst 2>; + reset-names = "nand", "reg"; + resets = <&sys_rst 2>, <&sys_rst 2>; }; }; }; diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi index d6a1fc269241..dfae90adbb7c 100644 --- a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi +++ b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * ARM Ltd. Versatile Express * diff --git a/arch/arm/boot/dts/vexpress-v2m.dtsi b/arch/arm/boot/dts/vexpress-v2m.dtsi index 8e57e15307e2..2e29d7790497 100644 --- a/arch/arm/boot/dts/vexpress-v2m.dtsi +++ b/arch/arm/boot/dts/vexpress-v2m.dtsi @@ -451,4 +451,4 @@ }; }; }; -};
\ No newline at end of file +}; diff --git a/arch/arm/boot/dts/vf-colibri.dtsi b/arch/arm/boot/dts/vf-colibri.dtsi index b6a1eeeb2bb4..fba37b8756f7 100644 --- a/arch/arm/boot/dts/vf-colibri.dtsi +++ b/arch/arm/boot/dts/vf-colibri.dtsi @@ -129,8 +129,11 @@ &i2c0 { clock-frequency = <400000>; - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c0>; + pinctrl-1 = <&pinctrl_i2c0_gpio>; + scl-gpios = <&gpio1 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio1 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; }; &nfc { @@ -308,6 +311,13 @@ >; }; + pinctrl_i2c0_gpio: i2c0gpiogrp { + fsl,pins = < + VF610_PAD_PTB14__GPIO_36 0x37ff + VF610_PAD_PTB15__GPIO_37 0x37ff + >; + }; + pinctrl_nfc: nfcgrp { fsl,pins = < VF610_PAD_PTD23__NF_IO7 0x28df diff --git a/arch/arm/boot/dts/vf500-colibri.dtsi b/arch/arm/boot/dts/vf500-colibri.dtsi index 237b0246fa84..92255f8893ce 100644 --- a/arch/arm/boot/dts/vf500-colibri.dtsi +++ b/arch/arm/boot/dts/vf500-colibri.dtsi @@ -44,7 +44,7 @@ / { model = "Toradex Colibri VF50 COM"; - compatible = "toradex,vf610-colibri_vf50", "fsl,vf500"; + compatible = "toradex,vf500-colibri_vf50", "fsl,vf500"; memory@80000000 { device_type = "memory"; diff --git a/arch/arm/boot/dts/vf610-bk4.dts b/arch/arm/boot/dts/vf610-bk4.dts index 3fa0cbe456db..830c85476b3d 100644 --- a/arch/arm/boot/dts/vf610-bk4.dts +++ b/arch/arm/boot/dts/vf610-bk4.dts @@ -246,37 +246,41 @@ reg = <0>; }; - n25q128a13_2: flash@1 { + n25q128a13_2: flash@2 { compatible = "n25q128a13", "jedec,spi-nor"; #address-cells = <1>; #size-cells = <1>; spi-max-frequency = <66000000>; spi-rx-bus-width = <2>; - reg = <1>; + reg = <2>; }; }; &uart0 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart0>; + /delete-property/dma-names; status = "okay"; }; &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; + /delete-property/dma-names; status = "okay"; }; &uart2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; + /delete-property/dma-names; status = "okay"; }; &uart3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; + /delete-property/dma-names; status = "okay"; }; diff --git a/arch/arm/boot/dts/vf610-zii-cfu1.dts b/arch/arm/boot/dts/vf610-zii-cfu1.dts index 9466913693ac..28732249cfc0 100644 --- a/arch/arm/boot/dts/vf610-zii-cfu1.dts +++ b/arch/arm/boot/dts/vf610-zii-cfu1.dts @@ -207,7 +207,7 @@ }; &i2c0 { - clock-frequency = <400000>; + clock-frequency = <100000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c0>; status = "okay"; @@ -236,6 +236,18 @@ }; }; +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + watchdog@38 { + compatible = "zii,rave-wdt"; + reg = <0x38>; + }; +}; + &snvsrtc { status = "disabled"; }; @@ -304,6 +316,13 @@ >; }; + pinctrl_i2c1: i2c1grp { + fsl,pins = < + VF610_PAD_PTB16__I2C1_SCL 0x37ff + VF610_PAD_PTB17__I2C1_SDA 0x37ff + >; + }; + pinctrl_leds_debug: pinctrl-leds-debug { fsl,pins = < VF610_PAD_PTD3__GPIO_82 0x31c2 diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts index 48086c5e8549..e500911ce0a5 100644 --- a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts +++ b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts @@ -323,11 +323,6 @@ }; &i2c0 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c0>; - status = "okay"; - gpio5: io-expander@20 { compatible = "nxp,pca9554"; reg = <0x20>; @@ -350,11 +345,6 @@ }; &i2c2 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c2>; - status = "okay"; - tca9548@70 { compatible = "nxp,pca9548"; pinctrl-0 = <&pinctrl_i2c_mux_reset>; diff --git a/arch/arm/boot/dts/vf610-zii-scu4-aib.dts b/arch/arm/boot/dts/vf610-zii-scu4-aib.dts index d7019e89f588..b642520199ba 100644 --- a/arch/arm/boot/dts/vf610-zii-scu4-aib.dts +++ b/arch/arm/boot/dts/vf610-zii-scu4-aib.dts @@ -183,11 +183,6 @@ #address-cells = <1>; #size-cells = <0>; - port@1 { - reg = <1>; - label = "internal_j9"; - }; - port@2 { reg = <2>; label = "eth_fc_1000_2"; @@ -271,11 +266,6 @@ #address-cells = <1>; #size-cells = <0>; - port@1 { - reg = <1>; - label = "internal_j8"; - }; - port@2 { reg = <2>; label = "eth_fc_1000_8"; @@ -417,7 +407,7 @@ pinctrl-0 = <&pinctrl_dspi1>; status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "jedec,spi-nor"; @@ -430,7 +420,7 @@ }; }; - spi-flash@1 { + flash@1 { #address-cells = <1>; #size-cells = <1>; compatible = "jedec,spi-nor"; @@ -519,7 +509,7 @@ #gpio-cells = <2>; }; - lm75@48 { + temp-sensor@48 { compatible = "national,lm75"; reg = <0x48>; }; @@ -534,7 +524,7 @@ reg = <0x52>; }; - ds1682@6b { + elapsed-time-recorder@6b { compatible = "dallas,ds1682"; reg = <0x6b>; }; @@ -546,7 +536,12 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - adt7411@4a { + watchdog@38 { + compatible = "zii,rave-wdt"; + reg = <0x38>; + }; + + adc@4a { compatible = "adi,adt7411"; reg = <0x4a>; }; @@ -558,21 +553,23 @@ pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; - gpio9: sx1503q@20 { + gpio9: io-expander@20 { compatible = "semtech,sx1503q"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sx1503_20>; #gpio-cells = <2>; reg = <0x20>; gpio-controller; + interrupt-parent = <&gpio1>; + interrupts = <31 IRQ_TYPE_EDGE_FALLING>; }; - lm75@4e { + temp-sensor@4e { compatible = "national,lm75"; reg = <0x4e>; }; - lm75@4f { + temp-sensor@4f { compatible = "national,lm75"; reg = <0x4f>; }; @@ -584,22 +581,23 @@ reg = <0x23>; }; - adt7411@4a { + adc@4a { compatible = "adi,adt7411"; reg = <0x4a>; }; - at24c08@54 { + eeprom@54 { compatible = "atmel,24c08"; reg = <0x54>; }; - tca9548@70 { + i2c-mux@70 { compatible = "nxp,pca9548"; pinctrl-names = "default"; #address-cells = <1>; #size-cells = <0>; reg = <0x70>; + i2c-mux-idle-disconnect; sff0_i2c: i2c@1 { #address-cells = <1>; @@ -632,12 +630,13 @@ }; }; - tca9548@71 { + i2c-mux@71 { compatible = "nxp,pca9548"; pinctrl-names = "default"; reg = <0x71>; #address-cells = <1>; #size-cells = <0>; + i2c-mux-idle-disconnect; sff5_i2c: i2c@1 { #address-cells = <1>; @@ -685,7 +684,6 @@ linux,rs485-enabled-at-boot-time; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; - rs485-rts-delay = <0 200>; status = "okay"; }; @@ -693,7 +691,6 @@ linux,rs485-enabled-at-boot-time; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; - rs485-rts-delay = <0 200>; status = "okay"; }; @@ -777,7 +774,8 @@ VF610_PAD_PTB15__I2C0_SDA 0x37ff >; }; - pinctrl_i2c1: i2c1grp { + + pinctrl_i2c1: i2c1grp { fsl,pins = < VF610_PAD_PTB16__I2C1_SCL 0x37ff VF610_PAD_PTB17__I2C1_SDA 0x37ff @@ -791,13 +789,6 @@ >; }; - pinctrl_i2c3: i2c3grp { - fsl,pins = < - VF610_PAD_PTA30__I2C3_SCL 0x37ff - VF610_PAD_PTA31__I2C3_SDA 0x37ff - >; - }; - pinctrl_leds_debug: pinctrl-leds-debug { fsl,pins = < VF610_PAD_PTB26__GPIO_96 0x31c2 diff --git a/arch/arm/boot/dts/vf610-zii-spb4.dts b/arch/arm/boot/dts/vf610-zii-spb4.dts index 9dde83ccb9d1..77e1484211e4 100644 --- a/arch/arm/boot/dts/vf610-zii-spb4.dts +++ b/arch/arm/boot/dts/vf610-zii-spb4.dts @@ -316,13 +316,6 @@ >; }; - pinctrl_i2c1: i2c1grp { - fsl,pins = < - VF610_PAD_PTB16__I2C1_SCL 0x37ff - VF610_PAD_PTB17__I2C1_SDA 0x37ff - >; - }; - pinctrl_leds_debug: pinctrl-leds-debug { fsl,pins = < VF610_PAD_PTD3__GPIO_82 0x31c2 diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi index ca6425ad794c..db3899b07992 100644 --- a/arch/arm/boot/dts/zynq-7000.dtsi +++ b/arch/arm/boot/dts/zynq-7000.dtsi @@ -59,6 +59,39 @@ regulator-always-on; }; + replicator { + compatible = "arm,coresight-static-replicator"; + clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>; + clock-names = "apb_pclk", "dbg_trc", "dbg_apb"; + + out-ports { + #address-cells = <1>; + #size-cells = <0>; + + /* replicator output ports */ + port@0 { + reg = <0>; + replicator_out_port0: endpoint { + remote-endpoint = <&tpiu_in_port>; + }; + }; + port@1 { + reg = <1>; + replicator_out_port1: endpoint { + remote-endpoint = <&etb_in_port>; + }; + }; + }; + in-ports { + /* replicator input port */ + port { + replicator_in_port0: endpoint { + remote-endpoint = <&funnel_out_port>; + }; + }; + }; + }; + amba: amba { compatible = "simple-bus"; #address-cells = <1>; @@ -365,5 +398,107 @@ reg = <0xf8005000 0x1000>; timeout-sec = <10>; }; + + etb@f8801000 { + compatible = "arm,coresight-etb10", "arm,primecell"; + reg = <0xf8801000 0x1000>; + clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>; + clock-names = "apb_pclk", "dbg_trc", "dbg_apb"; + in-ports { + port { + etb_in_port: endpoint { + remote-endpoint = <&replicator_out_port1>; + }; + }; + }; + }; + + tpiu@f8803000 { + compatible = "arm,coresight-tpiu", "arm,primecell"; + reg = <0xf8803000 0x1000>; + clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>; + clock-names = "apb_pclk", "dbg_trc", "dbg_apb"; + in-ports { + port { + tpiu_in_port: endpoint { + remote-endpoint = <&replicator_out_port0>; + }; + }; + }; + }; + + funnel@f8804000 { + compatible = "arm,coresight-static-funnel", "arm,primecell"; + reg = <0xf8804000 0x1000>; + clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>; + clock-names = "apb_pclk", "dbg_trc", "dbg_apb"; + + /* funnel output ports */ + out-ports { + port { + funnel_out_port: endpoint { + remote-endpoint = + <&replicator_in_port0>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + /* funnel input ports */ + port@0 { + reg = <0>; + funnel0_in_port0: endpoint { + remote-endpoint = <&ptm0_out_port>; + }; + }; + + port@1 { + reg = <1>; + funnel0_in_port1: endpoint { + remote-endpoint = <&ptm1_out_port>; + }; + }; + + port@2 { + reg = <2>; + funnel0_in_port2: endpoint { + }; + }; + /* The other input ports are not connect to anything */ + }; + }; + + ptm@f889c000 { + compatible = "arm,coresight-etm3x", "arm,primecell"; + reg = <0xf889c000 0x1000>; + clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>; + clock-names = "apb_pclk", "dbg_trc", "dbg_apb"; + cpu = <&cpu0>; + out-ports { + port { + ptm0_out_port: endpoint { + remote-endpoint = <&funnel0_in_port0>; + }; + }; + }; + }; + + ptm@f889d000 { + compatible = "arm,coresight-etm3x", "arm,primecell"; + reg = <0xf889d000 0x1000>; + clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>; + clock-names = "apb_pclk", "dbg_trc", "dbg_apb"; + cpu = <&cpu1>; + out-ports { + port { + ptm1_out_port: endpoint { + remote-endpoint = <&funnel0_in_port1>; + }; + }; + }; + }; }; }; |
