diff options
Diffstat (limited to 'arch/arm/boot/dts/am3517.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/am3517.dtsi | 63 |
1 files changed, 62 insertions, 1 deletions
diff --git a/arch/arm/boot/dts/am3517.dtsi b/arch/arm/boot/dts/am3517.dtsi index 23ea381d363f..e0b5a00e2078 100644 --- a/arch/arm/boot/dts/am3517.dtsi +++ b/arch/arm/boot/dts/am3517.dtsi @@ -16,6 +16,37 @@ can = &hecc; }; + cpus { + cpu: cpu@0 { + /* Based on OMAP3630 variants OPP50 and OPP100 */ + operating-points-v2 = <&cpu0_opp_table>; + + clock-latency = <300000>; /* From legacy driver */ + }; + }; + + cpu0_opp_table: opp-table { + compatible = "operating-points-v2-ti-cpu"; + syscon = <&scm_conf>; + /* + * AM3517 TRM only lists 600MHz @ 1.2V, but omap36xx + * appear to operate at 300MHz as well. Since AM3517 only + * lists one operating voltage, it will remain fixed at 1.2V + */ + opp50-300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-microvolt = <1200000>; + opp-supported-hw = <0xffffffff 0xffffffff>; + opp-suspend; + }; + + opp100-600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <1200000>; + opp-supported-hw = <0xffffffff 0xffffffff>; + }; + }; + ocp@68000000 { am35x_otg_hs: am35x_otg_hs@5c040000 { compatible = "ti,omap3-musb"; @@ -43,7 +74,7 @@ clock-names = "ick"; }; - davinci_mdio: ethernet@5c030000 { + davinci_mdio: mdio@5c030000 { compatible = "ti,davinci_mdio"; ti,hwmods = "davinci_mdio"; status = "disabled"; @@ -88,9 +119,39 @@ interrupts = <24>; clocks = <&hecc_ck>; }; + + /* + * On am3517 the OCP registers do not seem to be accessible + * similar to the omap34xx. Maybe SGX is permanently set to + * "OCP bypass mode", or maybe there is OCP_SYSCONFIG that is + * write-only at 0x50000e10. We detect SGX based on the SGX + * revision register instead of the unreadable OCP revision + * register. + */ + sgx_module: target-module@50000000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x50000014 0x4>; + reg-names = "rev"; + clocks = <&sgx_fck>, <&sgx_ick>; + clock-names = "fck", "ick"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x50000000 0x4000>; + + /* + * Closed source PowerVR driver, no child device + * binding or driver in mainline + */ + }; }; }; +/* Not currently working, probably needs at least different clocks */ +&rng_target { + status = "disabled"; + /delete-property/ clocks; +}; + /* Table Table 5-79 of the TRM shows 480ab000 is reserved */ &usb_otg_hs { status = "disabled"; |
