| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Rather than having to remember to include config.h anywhere
we reference a CONFIG variable (and usually forgetting),
this adds it to the default compiler flags so that it
gets included in every source file we build.
Change-Id: I53622ab4d46c55d942e98cae6ec03049fd5b3d08
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/87475
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Zachary Clark <zach@ibm.com>
Reviewed-by: Roland Veloz <rveloz@us.ibm.com>
Reviewed-by: Christian R Geddes <crgeddes@us.ibm.com>
Reviewed-by: Nicholas E Bofferding <bofferdn@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Depending on which vendor made a given OCMB the i2c device address
of the PMIC targets on the OCMB will be different. To account for this
we have added a new DYNAMIC_DEVICE_ADDRESS attribute. This attribute
is filled out on the PMIC target by looking at the SPD on parent
OCMB chip. This means that we must do presence detection on the OCMB
prior to the the PMIC targets. While doing i2c operations if a given
target has the DYNAMIC_DEVICE_ADDRESS we will use that over the devAddr
in the any complex i2c attribute for that target.
Change-Id: I22a185a65c064a1514751dd5828547c57af98df1
RTC: 209714
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/85394
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Daniel M Crowell <dcrowell@us.ibm.com>
Reviewed-by: Roland Veloz <rveloz@us.ibm.com>
Reviewed-by: William G Hoffa <wghoffa@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
First line of error log comment must include /*@
or error log will not be documented. Also fixed
in other HB files.
Change-Id: Ifa5eba6d6abd7f8565a4cc8d62a25a2b833725f2
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/82497
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Nicholas E Bofferding <bofferdn@us.ibm.com>
Reviewed-by: Matt Derksen <mderkse1@us.ibm.com>
Reviewed-by: Daniel M Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This commit will set the config flags to always read from HW
rather than the old VPD cache in PNOR. Until this point in Axone
we were still using an old copy of MVPD that we write into PNOR
during the startup simics scripts. From this commit onward we will
use the actual VPD simics provides. To handle this, some updates
we needed to the PG rules for Axone.
Change-Id: Ie06cefe1aec37edfc4c379ee1173bc51fc6bbe1f
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/76519
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Matt Derksen <mderkse1@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Axone reuses the RISK_LEVEL settings for Nimbus DD2.3 so changes
are made to reflect that. This is primarily a documentation
exercise but there is logic now to normalize the RISK_LEVEl up
to 4,5 versus 0,1 just to stay sane and reduce the test matrix.
Change-Id: I5410d1bf7b12fc7f771e2c9826fcd086b2520091
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/76757
Reviewed-by: Matt Derksen <mderkse1@us.ibm.com>
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Matthew Raybuck <matthew.raybuck@ibm.com>
Reviewed-by: Jayashankar Padath <jayashankar.padath@in.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Since the OCMB chip is held in reset until after presence detection the
IDEC register cannot be read to differentiate between Gemini and
Explorer chip types. To work around this issue, during the early part of
IPL when presence detection is occurring the OCMB IDEC function will instead
read the SPD and populate the necessary attributes with what is found
there. That will be used to determine the difference between Gemini and
Explorer until later when the OCMB IDEC register can be read from. At
that point the IDEC read will be executed again and the data read from
the OCMB IDEC register will be used to cross-check the data read from
the SPD. Any discrepancies will be handled with predictive error logs.
Change-Id: Ica664b06ff3488f48253d3ef02eff2d49c5d240d
RTC: 208696
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/76108
Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com>
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The OCMB Explorer Chip doesn't read for IDEC but instead assumes hardcoded
values. Since the Explorer chip is held in reset until iStep 10.4, this
commit will prevent IDEC reads during discoverTargets and instead
perform the read when exp_check_for_ready() is successful.
Change-Id: I4ef5a01badb195acca0c2187ef76ea55f58eafe4
RTC:201996
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/75881
Reviewed-by: Matt Derksen <mderkse1@us.ibm.com>
Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com>
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
Tested-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
PMIC is a voltage regulator for the DDIMM.
It supplies power to the OCMB and DIMM targets.
Change-Id: I10c1b03169f53b070f521ec9cd60cdbd15c4a268
RTC:206184
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/75136
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Reviewed-by: Glenn Miles <milesg@ibm.com>
Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The previous PG algorithm had several places where targets would be
rechecked or modified unnecessarily. This commit restructures the PG
algorithm and pulls all related code out of discoverTargets and adds it
to checkPartialGoodForDescendants which will be called by
discoverTargets.
Change-Id: I045f17f7ac22c673633cd3d951997b2371be1b8d
RTC:206066
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/72732
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Nicholas E. Bofferding <bofferdn@us.ibm.com>
Reviewed-by: Ilya Smirnov <ismirno@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
- Added new attribute to indicate if target should be assumed present
- Added that attribute to SP/BMC/UCD targets
- Check for assumed present UCDs in discover targets
- Iterate through every UCD for data flash update
RTC: 201991
Change-Id: Ia535a58ea0355582621a23d3c1b50b2417ad362f
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/73047
Reviewed-by: Matthew Raybuck <matthew.raybuck@ibm.com>
Reviewed-by: Michael Baiocchi <mbaiocch@us.ibm.com>
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Witherspoon (OpenPOWER) will run in native mode, which means
all the processors have to be at the same level
(all DD2.2 or all DD2.3). Other systems (ZZ) we support
running in a mixed configuration where DD2.3 processors will
be run in 2.2 compatibility mode. We also need to support
arbitrary OP systems that might want to run in compatibility
mode even without mixed parts.
See src/usr/hwas/common/README.md for the rules and resulting
mode.
Change-Id: I80fb98e2687b945ba506f2d75b1533884443e10b
RTC:201485
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/72214
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
PG issues were only ever displayed in traces. This commit creates a new
error log user detail section that will display the PG vector and
highlight which entries have issues. In addition, targets that are
determined to be non-functional will be added to the log and a hardware
callout will be added if a chip is found non-functional.
Change-Id: I9b401bcd5686951303946789034671c1a395fb91
RTC:180365
CMVC-Prereq:1075293
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/70004
Reviewed-by: Nicholas E. Bofferding <bofferdn@us.ibm.com>
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Reviewed-by: Michael Baiocchi <mbaiocch@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
There were a series of checks that were performed after we had
determined the DIMMs were functional that would be implicitly true since
the DIMMs are functional. Those were removed.
Change-Id: I14feae0129ac96c2f701000b0f265bff36250371
RTC:196804
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/70560
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Reviewed-by: Ilya Smirnov <ismirno@us.ibm.com>
Reviewed-by: Nicholas E. Bofferding <bofferdn@us.ibm.com>
Reviewed-by: DHRUVARAJ SUBHASH CHANDRAN <dhruvaraj@in.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Added support for MC->OMIC->OMI path in presentByAssoc.
Change-Id: I076194b44ac069b18afa5ff96af36c5fa859336e
RTC:196804
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/70307
Reviewed-by: Nicholas E. Bofferding <bofferdn@us.ibm.com>
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Reviewed-by: Ilya Smirnov <ismirno@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Added support for MC->MI->MCC->OMI->OCMB path in presentByAssoc and made
changes to checkMinimumHardware that will prevent all dimms from being
incorrectly deconfigured so that AXONE simics is able to reach
iStep 6.11.
Change-Id: I0be474733a78097505c85826a1f34a854144f931
RTC:196804
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/70058
Reviewed-by: Nicholas E. Bofferding <bofferdn@us.ibm.com>
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Reviewed-by: Ilya Smirnov <ismirno@us.ibm.com>
Reviewed-by: Michael Baiocchi <mbaiocch@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This commit removes the ddimm.C file that had the deviceFramework
routing for OCMB presence detection and replaces it with a new file
in src/usr/i2c/i2cTargetPres.C that is more generic for any target
that has the FAPI_I2C_CONTROLLER_INFO attribute. The i2c_mux target
also now uses this same code for its presence detection.
As a result of this change the src/usr/i2c/mux_i2c.* files have
also been removed. When getting rid of the ddimm.C file I had to put
the IDEC device routing somewhere else so I moved it to the hwasPlat
code where the other IDEC device routes are registered.
RTC: 196805
Change-Id: I27e5e3e8d0fe107c3d44a450e20efa6f50fa0c5f
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/69944
Reviewed-by: Matt Derksen <mderkse1@us.ibm.com>
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Roland Veloz <rveloz@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
- Updated data structures gpioAddr_t, eeprom_addr_t, misc_args_t, nvdimm_addr_t
and tpm_info_t with I2C MUX data members. Also added constructors to these
structures to default there data members with the correct default info.
- Updated macros DEVICE_I2C_PARMS, DEVICE_I2C_ADDRESS and
DEVICE_I2C_ADDRESS_OFFSET to take the I2C MUX bus selector parameter and the
I2C MUX entity path.
- Added method i2cAccessMux to file i2c.H/.C that will setup the call for the
I2C MUX. Method i2cCommonOP calls i2cAccessMux which then calls i2cCommonOp
with appropriate parameters for the I2C MUX: i2cCommonOP -> i2cAccessMux
-> i2cCommonOP.
- Updated i2ctest.H with new I2C MUX params to get it to pass.
RTC:191352
Change-Id: I6a70860eb2286bbd23d6157d72351b8adfa21aac
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/66651
Reviewed-by: Ilya Smirnov <ismirno@us.ibm.com>
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Reviewed-by: Nicholas E. Bofferding <bofferdn@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The original pg logic was a hard-coded criss-crossed jumble of logic
that was difficult to understand. It has now been generalized to an
algorithm that applies the correct logic based on a set of rules kept in
a table. This should make it easier to understand and maintain going
forward.
Change-Id: I51435cc2ca6bbfa9ebc8a3d52d4ebf23b5bd2730
RTC:193270
CMVC-Prereq: 1072559
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/68232
Reviewed-by: Ilya Smirnov <ismirno@us.ibm.com>
Reviewed-by: Nicholas E. Bofferding <bofferdn@us.ibm.com>
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add support for presence detection of new OMI, OMIC, and MCC targets.
Detection is done by looking at the MC01, and MC23 PG data.
Change-Id: I2706bb28f64df653546ce22451e690507be09d8e
RTC: 197541
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/64966
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Matt Derksen <mderkse1@us.ibm.com>
Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Applied the normal parent/child rules for EC/EX/EQ logic to be done in
the runtime deconfig logic.
After applying the deconfig logic, then reset the PM for the parent
proc of the EX/EX/EQ.
To facilitate the code changes, modified the return value of the
TARGETING::getParent(...) call. It no longer returns a const * Target,
considering 5 times out of 7 of it's usage, users were just
staic_cast(ing) away the const.
Clear out the HB reset attribute in the mpipl path.
Modify PRD logic to use runtime deconfig call in malfunction alert
path.
CMVC-Prereq: 1066157
Change-Id: If81f2f15c6e84bf2adb6fd66c1321b8f1ddf1a86
CQ: SW443157
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/64873
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Roland Veloz <rveloz@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Current code enforces the same EC level for all processors in
the system. However, this breaks compatibility mode for P9C
1.2/1.3 and P9N 2.2/2.3. Added code to allow these to pass
the EC check when mixing parts
Change-Id: Ie013d94dfdee3627911f4afbec5f65d5ce984227
CQ:SW442691
Reviewed-on: http://rchgit01.rchland.ibm.com/gerrit1/64823
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
| |
Change-Id: I0c2ecba2450faf8437bd286fa0d1d4f2d7e6b171
CQ: SW433870
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/61492
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Current code doesn't take into account the case where an
EX has no core under. In this scenario, the code skips the
current proc and takes out the cores in the next proc.
This leads to more cores taken out from the next proc if
current proc has more EXs with no core.
The fix is to look and take out the next available cores
in current proc until no core available before move on
to the next proc.
Change-Id: I0e8650766c9f13c5616141b87e05967950d6fb56
CQ:SW424855
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/58460
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Reviewed-by: Richard J. Knight <rjknight@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
There are two cases where hostboot's attention is required in istep7:
- If HRMOR we booted with doesn't fall in the range of proc_mem_to_use's
memory, then the SBE is old. HB will do an sbe update and
request re-ipl
- If HB deconfigured a bunch of dimms in istep7 and ran out of memory,
then we will request a reconfig loop
Then, in istep14, we added another sanity check to make sure we have
memory as expected to prevent unexpected failure after exiting cache
contained mode.
Change-Id: I018f4ce862cc79b5d7bacbe01cc28d1d2b4fc788
CQ:SW430015
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/59696
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
On a phyp based system, when we detect that memory is missing
behind master processor, we find a proc with memory and set
ATTR_PROC_MEM_TO_USE to its HRMOR. This commit adds this support
in hwas common code as HWSV will call this function, update SBE
mbox registers, and IPL the system.
Change-Id: I88a6cb69aa10147365c556f9cf31014066bd3d08
CQ:SW430015
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/59159
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
Reviewed-by: Sachin Gupta <sgupta2m@in.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Resource recovery is a RAS feature wherein we do not apply certain gard records
if those records would result in a boot fail due to a lack of hardware. Change
the logic from applying speculative deconfiguration one by one to applying all
predictive gard records and then removing those records if minimal hardware is
not available. Also add BLOCK_SPEC_DECONFIG attribute to flag when speculative
deconfiguration is not allowed. This flag is set if minimum hardware is not
available and is cleared after a hardware change.
Change-Id: Ia065de3a44ab29fbf33ad4ce98bc42ea5144463f
RTC: 191414
CQ: SW424137
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/58041
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We currently do not support attribute overrides for enum based
attributes. Therefore, change the type of
ATTR_MFG_WRAP_TEST_ABUS_LINK_SET_ENABLE to uint8_t and add
PROC_EFF_FABRIC_GROUP/CHIP_ID attributes to processMrw.
Change-Id: I4991e19ab5ceac8e8cf0fbd826b68d7e0fd9ab1d
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/58527
Reviewed-by: Richard Ward <rward15@us.ibm.com>
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Roland Veloz <rveloz@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Change-Id: I347075dd2424ee8b96805456b3d7d9962f428b64
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/58347
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com>
Reviewed-by: Roland Veloz <rveloz@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Due to fabric limitations, we can only have 2 OBUSes
enabled at a time. This commit deconfigures the OBUSes
that do not belong the set of links to enable in
this boot based on attributes.
Change-Id: I15f5e9f3ea186367b9c4d55f4dc2e9b32b251f6d
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/57836
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Reviewed-by: Elizabeth K. Liner <eliner@us.ibm.com>
Reviewed-by: Roland Veloz <rveloz@us.ibm.com>
Reviewed-by: Martin Gloff <mgloff@us.ibm.com>
Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Previously we tried to add this callout to some hwas code. This
caused FSP-CI to fail because the FSP has not implemented support
for this platHwasErrorAddHWCollout. Now that the FSP has added
support we can allow this callout to happen
Change-Id: Ibc4063eecc6607f92e4c1cfe555348d2a0f12785
CQ: SW410022
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/56398
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Matt Derksen <mderkse1@us.ibm.com>
Reviewed-by: Martin Gloff <mgloff@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Implements a change to distribute field core overrides evenly
between processors while still allocating at least one core to the
master processor.
Change-Id: If9e5a1103e7368edf10299d69343205781e15493
CQ:SW418063
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/54422
Reviewed-by: ILYA SMIRNOV <ismirno@us.ibm.com>
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Nicholas E. Bofferding <bofferdn@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We observed FCO cores front-loading to first processor followed by
the next and so on. This change mixes the FCO cores between the
processors evenly.
Change-Id: If2bcaa699f8be355c1cd7a8ef76b55925921f290
CQ:SW404823
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/51030
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Reviewed-by: Brian E. Bakke <bbakke@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We do not support processor modules w/ different EC levels to be
on the same system. The rule is that all processors must match
the master processor. If this is not true then hostboot will TI.
Techically we could probably still boot and just gard out the
non-matching proc's but the use case for this will be lab/manufac.
For those cases we want the technician to know right away that they
put a module w/ the wrong DD level in a system.
RTC: 183243
Change-Id: I09b30550edd30c8523fd2a709c7b7a83f597eab8
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/50167
Reviewed-by: Matt Derksen <mderkse1@us.ibm.com>
Reviewed-by: Martin Gloff <mgloff@us.ibm.com>
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This attempt to read the ID/EC data causes a spurious recoverable
error to be generated on each boot from the devicefw associator
which does not know how to read the BMC via FSI.
Resolves #120
Signed-off-by: Robert Lippert <rlippert@google.com>
Change-Id: I26e7de3ed185d66e79b62d136bbe0bcc5acb5221
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/48668
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
checkminimumHardware was not checking whether NX chiplet(s)
was/were speculatively deconfigured, which prevented resource
recovery from being triggered. checkminimumHardware now uses
the l_functional predicate for NX chiplets (as well as for
everything else).
Change-Id: I886ee45a0d05414db016888f5faf951e1363a9f7
CQ:SW401514
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/48253
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Reviewed-by: Prachi Gupta <pragupta@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
A situation has occurred where an OBUS was not functional but its
child OBUS_BRICKs were, which doesn't make sense. This fix is to
implement checking for OBUS (parent) functionality as part of
OBUS_BRICK check and mark the OBUS_BRICKs not functional if their
parent is not functional.
Change-Id: I7f52927455f08296e55d73312e932f9ebbd2b700
CQ:SW404097
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/48415
Reviewed-by: Martin Gloff <mgloff@us.ibm.com>
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Reviewed-by: Matt Derksen <mderkse1@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Reviewed-by: Prachi Gupta <pragupta@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Nicholas E. Bofferding <bofferdn@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
- remove OPTICS_CONFIG_MODE from obus brick targets
- remove FAPI_POS from cumulus obus bricks
Change-Id: I7248bcf39526378fa5b8322a331beeeb33d4d2a4
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/46141
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com>
Reviewed-by: Prachi Gupta <pragupta@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Need to remove check in HWAS to ensure there is memory for master
processor.
An error log was added temporarily after detecting that proc0
lacked memory behind it. This error log is being removed so
that the memory remap processing can take place.
Change-Id: Ia7a4ed689c8bad9f1de94f63af210a463000ad9c
RTC: 149250
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/42628
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Matt Derksen <mderkse1@us.ibm.com>
Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Handle differences in PG data for Cumulus that may not have been
identified or finalized for the initial P9 development.
Change-Id: Ibec5a31cca5e8cf62d3671698e09c01f24619d1e
RTC: 134608
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/44020
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Reviewed-by: Prachi Gupta <pragupta@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Reviewed-by: Martin Gloff <mgloff@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Change-Id: Ie1badcef9185049166bc1afc5419e7d7252f2f4f
RTC: 159835
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/43050
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com>
Reviewed-by: Prachi Gupta <pragupta@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Change-Id: I764527b57f07ce5d2c95283ba08fd7dd96d1222c
RTC:178217
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/44516
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Reviewed-by: Prachi Gupta <pragupta@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Change-Id: Ib475bc1b2c43eaa4529c0c4b5f2af6d1a72091b4
RTC:166755
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/41979
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: ILYA SMIRNOV <ismirno@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
Reviewed-by: NAGENDRA K. GURRAM <nagendra.g@in.ibm.com>
Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
| |
Change-Id: I0aaaf935a0b761d0c09b260315781889562dc32e
RTC: 174401
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/40982
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Change-Id: I1388859a81ba8b2e040f6d136eafcf50f1f138ba
RTC:173738
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/40218
Reviewed-by: Matthew A. Ploetz <maploetz@us.ibm.com>
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Change-Id: I17b52033d1e6811c320f201056708f31ef34d0e9
RTC:171597
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/38481
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com>
Reviewed-by: Matthew A. Ploetz <maploetz@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Firmware doesn't currently support booting in a configuration
where there is no functional memory behind the master processor
(proc0). Added an explicit check to the 'minimum hardware'
logic to account for this to avoid confusing CRESP errors when
this scenario shows up.
Change-Id: Ia9c1e1d1cb135efb58a52edfccffe66174f57a2c
CQ: SW384402
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/39048
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com>
Reviewed-by: Stephen M. Cprek <smcprek@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Remove conditional around platReadLx call now that HWSV support is
available in CMVC.
Change-Id: I46c4eff0ac0ba12fa9fa6fcd935cf93ebb907a9e
RTC: 167294
CMVC-Prereq: 1015719
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/37134
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Corey V. Swenson <cswenson@us.ibm.com>
Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The CRP0 record has 8 records (L1-L8) that correspond to the 8 ports
(MCA targets) for the chip. One of the fields inside the keyword indicates
if the port is disabled. This field marks the MCA as non-functional, but
the MCA remains present.
Change-Id: I2c7c89c9567ec9f048a426b2204b18e10ccda601
RTC:166354
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/34256
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com>
Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Added check to skip IDEC check on SP target
Force presence detection on SP target
Change-Id: I47115aa1cd15a71a263944244d17c72539c72e56
RTC: 161726
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/35542
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: DHRUVARAJ SUBHASH CHANDRAN <dhruvaraj@in.ibm.com>
Reviewed-by: Stephen M. Cprek <smcprek@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
-Deconfig dangling single cores for lab HW
-Product HW won't have this issue
Change-Id: Ide7b342f3cd2aff2e78fd39006698f0077828e68
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/35274
Reviewed-by: Martin Gloff <mgloff@us.ibm.com>
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: FSP CI Jenkins <fsp-CI-jenkins+hostboot@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>
|