diff options
Diffstat (limited to 'drivers/serial')
| -rw-r--r-- | drivers/serial/Kconfig | 18 | ||||
| -rw-r--r-- | drivers/serial/Makefile | 1 | ||||
| -rw-r--r-- | drivers/serial/mcfuart.c | 188 | ||||
| -rw-r--r-- | drivers/serial/serial_ar933x.c | 243 |
4 files changed, 406 insertions, 44 deletions
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index a9a5d475dd..2497ae90a0 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -89,6 +89,15 @@ config DEBUG_UART_ALTERA_UART You will need to provide parameters to make this work. The driver will be available until the real driver model serial is running. +config DEBUG_UART_AR933X + bool "QCA/Atheros ar933x" + depends on AR933X_UART + help + Select this to enable a debug UART using the ar933x uart driver. + You will need to provide parameters to make this work. The + driver will be available until the real driver model serial is + running. + config DEBUG_UART_NS16550 bool "ns16550" help @@ -263,6 +272,15 @@ config ALTERA_UART Select this to enable an UART for Altera devices. Please find details on the "Embedded Peripherals IP User Guide" of Altera. +config AR933X_UART + bool "QCA/Atheros ar933x UART support" + depends on DM_SERIAL && SOC_AR933X + help + Select this to enable UART support for QCA/Atheros ar933x + devices. This driver uses driver model and requires a device + tree binding to operate, please refer to the document at + doc/device-tree-bindings/serial/qca,ar9330-uart.txt. + config FSL_LPUART bool "Freescale LPUART support" help diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile index b0ac9d8a56..9def128e89 100644 --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile @@ -17,6 +17,7 @@ endif obj-$(CONFIG_ALTERA_UART) += altera_uart.o obj-$(CONFIG_ALTERA_JTAG_UART) += altera_jtag_uart.o +obj-$(CONFIG_AR933X_UART) += serial_ar933x.o obj-$(CONFIG_ARM_DCC) += arm_dcc.o obj-$(CONFIG_ATMEL_USART) += atmel_usart.o obj-$(CONFIG_EFI_APP) += serial_efi.o diff --git a/drivers/serial/mcfuart.c b/drivers/serial/mcfuart.c index 407354fc4c..059cb0fc6e 100644 --- a/drivers/serial/mcfuart.c +++ b/drivers/serial/mcfuart.c @@ -2,6 +2,9 @@ * (C) Copyright 2004-2007 Freescale Semiconductor, Inc. * TsiChung Liew, Tsi-Chung.Liew@freescale.com. * + * Modified to add device model (DM) support + * (C) Copyright 2015 Angelo Dureghello <angelo@sysam.it> + * * SPDX-License-Identifier: GPL-2.0+ */ @@ -11,9 +14,10 @@ */ #include <common.h> +#include <dm.h> +#include <dm/platform_data/serial_coldfire.h> #include <serial.h> #include <linux/compiler.h> - #include <asm/immap.h> #include <asm/uart.h> @@ -21,91 +25,110 @@ DECLARE_GLOBAL_DATA_PTR; extern void uart_port_conf(int port); -static int mcf_serial_init(void) +static int mcf_serial_init_common(uart_t *uart, int port_idx, int baudrate) { - volatile uart_t *uart; u32 counter; - uart = (volatile uart_t *)(CONFIG_SYS_UART_BASE); - - uart_port_conf(CONFIG_SYS_UART_PORT); + uart_port_conf(port_idx); /* write to SICR: SIM2 = uart mode,dcd does not affect rx */ - uart->ucr = UART_UCR_RESET_RX; - uart->ucr = UART_UCR_RESET_TX; - uart->ucr = UART_UCR_RESET_ERROR; - uart->ucr = UART_UCR_RESET_MR; + writeb(UART_UCR_RESET_RX, &uart->ucr); + writeb(UART_UCR_RESET_TX, &uart->ucr); + writeb(UART_UCR_RESET_ERROR, &uart->ucr); + writeb(UART_UCR_RESET_MR, &uart->ucr); __asm__("nop"); - uart->uimr = 0; + writeb(0, &uart->uimr); /* write to CSR: RX/TX baud rate from timers */ - uart->ucsr = (UART_UCSR_RCS_SYS_CLK | UART_UCSR_TCS_SYS_CLK); + writeb(UART_UCSR_RCS_SYS_CLK | UART_UCSR_TCS_SYS_CLK, &uart->ucsr); - uart->umr = (UART_UMR_BC_8 | UART_UMR_PM_NONE); - uart->umr = UART_UMR_SB_STOP_BITS_1; + writeb(UART_UMR_BC_8 | UART_UMR_PM_NONE, &uart->umr); + writeb(UART_UMR_SB_STOP_BITS_1, &uart->umr); /* Setting up BaudRate */ - counter = (u32) ((gd->bus_clk / 32) + (gd->baudrate / 2)); - counter = counter / gd->baudrate; + counter = (u32) ((gd->bus_clk / 32) + (baudrate / 2)); + counter = counter / baudrate; /* write to CTUR: divide counter upper byte */ - uart->ubg1 = (u8) ((counter & 0xff00) >> 8); + writeb((u8)((counter & 0xff00) >> 8), &uart->ubg1); /* write to CTLR: divide counter lower byte */ - uart->ubg2 = (u8) (counter & 0x00ff); + writeb((u8)(counter & 0x00ff), &uart->ubg2); - uart->ucr = (UART_UCR_RX_ENABLED | UART_UCR_TX_ENABLED); + writeb(UART_UCR_RX_ENABLED | UART_UCR_TX_ENABLED, &uart->ucr); return (0); } +static void mcf_serial_setbrg_common(uart_t *uart, int baudrate) +{ + u32 counter; + + /* Setting up BaudRate */ + counter = (u32) ((gd->bus_clk / 32) + (baudrate / 2)); + counter = counter / baudrate; + + /* write to CTUR: divide counter upper byte */ + writeb(((counter & 0xff00) >> 8), &uart->ubg1); + /* write to CTLR: divide counter lower byte */ + writeb((counter & 0x00ff), &uart->ubg2); + + writeb(UART_UCR_RESET_RX, &uart->ucr); + writeb(UART_UCR_RESET_TX, &uart->ucr); + + writeb(UART_UCR_RX_ENABLED | UART_UCR_TX_ENABLED, &uart->ucr); +} + +#ifndef CONFIG_DM_SERIAL + +static int mcf_serial_init(void) +{ + uart_t *uart_base; + int port_idx; + + uart_base = (uart_t *)CONFIG_SYS_UART_BASE; + port_idx = CONFIG_SYS_UART_PORT; + + return mcf_serial_init_common(uart_base, port_idx, gd->baudrate); +} + static void mcf_serial_putc(const char c) { - volatile uart_t *uart = (volatile uart_t *)(CONFIG_SYS_UART_BASE); + uart_t *uart = (uart_t *)CONFIG_SYS_UART_BASE; if (c == '\n') serial_putc('\r'); /* Wait for last character to go. */ - while (!(uart->usr & UART_USR_TXRDY)) ; + while (!(readb(&uart->usr) & UART_USR_TXRDY)) + ; - uart->utb = c; + writeb(c, &uart->utb); } static int mcf_serial_getc(void) { - volatile uart_t *uart = (volatile uart_t *)(CONFIG_SYS_UART_BASE); + uart_t *uart = (uart_t *)CONFIG_SYS_UART_BASE; /* Wait for a character to arrive. */ - while (!(uart->usr & UART_USR_RXRDY)) ; - return uart->urb; -} - -static int mcf_serial_tstc(void) -{ - volatile uart_t *uart = (volatile uart_t *)(CONFIG_SYS_UART_BASE); + while (!(readb(&uart->usr) & UART_USR_RXRDY)) + ; - return (uart->usr & UART_USR_RXRDY); + return readb(&uart->urb); } static void mcf_serial_setbrg(void) { - volatile uart_t *uart = (volatile uart_t *)(CONFIG_SYS_UART_BASE); - u32 counter; - - /* Setting up BaudRate */ - counter = (u32) ((gd->bus_clk / 32) + (gd->baudrate / 2)); - counter = counter / gd->baudrate; + uart_t *uart = (uart_t *)CONFIG_SYS_UART_BASE; - /* write to CTUR: divide counter upper byte */ - uart->ubg1 = ((counter & 0xff00) >> 8); - /* write to CTLR: divide counter lower byte */ - uart->ubg2 = (counter & 0x00ff); + mcf_serial_setbrg_common(uart, gd->baudrate); +} - uart->ucr = UART_UCR_RESET_RX; - uart->ucr = UART_UCR_RESET_TX; +static int mcf_serial_tstc(void) +{ + uart_t *uart = (uart_t *)CONFIG_SYS_UART_BASE; - uart->ucr = UART_UCR_RX_ENABLED | UART_UCR_TX_ENABLED; + return readb(&uart->usr) & UART_USR_RXRDY; } static struct serial_device mcf_serial_drv = { @@ -128,3 +151,80 @@ __weak struct serial_device *default_serial_console(void) { return &mcf_serial_drv; } + +#endif + +#ifdef CONFIG_DM_SERIAL + +static int coldfire_serial_probe(struct udevice *dev) +{ + struct coldfire_serial_platdata *plat = dev->platdata; + + return mcf_serial_init_common((uart_t *)plat->base, + plat->port, plat->baudrate); +} + +static int coldfire_serial_putc(struct udevice *dev, const char ch) +{ + struct coldfire_serial_platdata *plat = dev->platdata; + uart_t *uart = (uart_t *)plat->base; + + /* Wait for last character to go. */ + if (!(readb(&uart->usr) & UART_USR_TXRDY)) + return -EAGAIN; + + writeb(ch, &uart->utb); + + return 0; +} + +static int coldfire_serial_getc(struct udevice *dev) +{ + struct coldfire_serial_platdata *plat = dev->platdata; + uart_t *uart = (uart_t *)(plat->base); + + /* Wait for a character to arrive. */ + if (!(readb(&uart->usr) & UART_USR_RXRDY)) + return -EAGAIN; + + return readb(&uart->urb); +} + +int coldfire_serial_setbrg(struct udevice *dev, int baudrate) +{ + struct coldfire_serial_platdata *plat = dev->platdata; + uart_t *uart = (uart_t *)(plat->base); + + mcf_serial_setbrg_common(uart, baudrate); + + return 0; +} + +static int coldfire_serial_pending(struct udevice *dev, bool input) +{ + struct coldfire_serial_platdata *plat = dev->platdata; + uart_t *uart = (uart_t *)(plat->base); + + if (input) + return readb(&uart->usr) & UART_USR_RXRDY ? 1 : 0; + else + return readb(&uart->usr) & UART_USR_TXRDY ? 0 : 1; + + return 0; +} + +static const struct dm_serial_ops coldfire_serial_ops = { + .putc = coldfire_serial_putc, + .pending = coldfire_serial_pending, + .getc = coldfire_serial_getc, + .setbrg = coldfire_serial_setbrg, +}; + +U_BOOT_DRIVER(serial_coldfire) = { + .name = "serial_coldfire", + .id = UCLASS_SERIAL, + .probe = coldfire_serial_probe, + .ops = &coldfire_serial_ops, + .flags = DM_FLAG_PRE_RELOC, +}; +#endif diff --git a/drivers/serial/serial_ar933x.c b/drivers/serial/serial_ar933x.c new file mode 100644 index 0000000000..aae66dc682 --- /dev/null +++ b/drivers/serial/serial_ar933x.c @@ -0,0 +1,243 @@ +/* + * Copyright (C) 2015-2016 Wills Wang <wills.wang@live.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <dm.h> +#include <div64.h> +#include <errno.h> +#include <serial.h> +#include <asm/io.h> +#include <asm/addrspace.h> +#include <asm/types.h> +#include <dm/pinctrl.h> +#include <mach/ar71xx_regs.h> + +#define AR933X_UART_DATA_REG 0x00 +#define AR933X_UART_CS_REG 0x04 +#define AR933X_UART_CLK_REG 0x08 + +#define AR933X_UART_DATA_TX_RX_MASK 0xff +#define AR933X_UART_DATA_RX_CSR BIT(8) +#define AR933X_UART_DATA_TX_CSR BIT(9) +#define AR933X_UART_CS_IF_MODE_S 2 +#define AR933X_UART_CS_IF_MODE_M 0x3 +#define AR933X_UART_CS_IF_MODE_DTE 1 +#define AR933X_UART_CS_IF_MODE_DCE 2 +#define AR933X_UART_CS_TX_RDY_ORIDE BIT(7) +#define AR933X_UART_CS_RX_RDY_ORIDE BIT(8) +#define AR933X_UART_CLK_STEP_M 0xffff +#define AR933X_UART_CLK_SCALE_M 0xfff +#define AR933X_UART_CLK_SCALE_S 16 +#define AR933X_UART_CLK_STEP_S 0 + +struct ar933x_serial_priv { + void __iomem *regs; +}; + +/* + * Baudrate algorithm come from Linux/drivers/tty/serial/ar933x_uart.c + * baudrate = (clk / (scale + 1)) * (step * (1 / 2^17)) + */ +static u32 ar933x_serial_get_baud(u32 clk, u32 scale, u32 step) +{ + u64 t; + u32 div; + + div = (2 << 16) * (scale + 1); + t = clk; + t *= step; + t += (div / 2); + do_div(t, div); + + return t; +} + +static void ar933x_serial_get_scale_step(u32 clk, u32 baud, + u32 *scale, u32 *step) +{ + u32 tscale, baudrate; + long min_diff; + + *scale = 0; + *step = 0; + + min_diff = baud; + for (tscale = 0; tscale < AR933X_UART_CLK_SCALE_M; tscale++) { + u64 tstep; + int diff; + + tstep = baud * (tscale + 1); + tstep *= (2 << 16); + do_div(tstep, clk); + + if (tstep > AR933X_UART_CLK_STEP_M) + break; + + baudrate = ar933x_serial_get_baud(clk, tscale, tstep); + diff = abs(baudrate - baud); + if (diff < min_diff) { + min_diff = diff; + *scale = tscale; + *step = tstep; + } + } +} + +static int ar933x_serial_setbrg(struct udevice *dev, int baudrate) +{ + struct ar933x_serial_priv *priv = dev_get_priv(dev); + u32 val, scale, step; + + val = get_serial_clock(); + ar933x_serial_get_scale_step(val, baudrate, &scale, &step); + + val = (scale & AR933X_UART_CLK_SCALE_M) + << AR933X_UART_CLK_SCALE_S; + val |= (step & AR933X_UART_CLK_STEP_M) + << AR933X_UART_CLK_STEP_S; + writel(val, priv->regs + AR933X_UART_CLK_REG); + + return 0; +} + +static int ar933x_serial_putc(struct udevice *dev, const char c) +{ + struct ar933x_serial_priv *priv = dev_get_priv(dev); + u32 data; + + data = readl(priv->regs + AR933X_UART_DATA_REG); + if (!(data & AR933X_UART_DATA_TX_CSR)) + return -EAGAIN; + + data = (u32)c | AR933X_UART_DATA_TX_CSR; + writel(data, priv->regs + AR933X_UART_DATA_REG); + + return 0; +} + +static int ar933x_serial_getc(struct udevice *dev) +{ + struct ar933x_serial_priv *priv = dev_get_priv(dev); + u32 data; + + data = readl(priv->regs + AR933X_UART_DATA_REG); + if (!(data & AR933X_UART_DATA_RX_CSR)) + return -EAGAIN; + + writel(AR933X_UART_DATA_RX_CSR, priv->regs + AR933X_UART_DATA_REG); + return data & AR933X_UART_DATA_TX_RX_MASK; +} + +static int ar933x_serial_pending(struct udevice *dev, bool input) +{ + struct ar933x_serial_priv *priv = dev_get_priv(dev); + u32 data; + + data = readl(priv->regs + AR933X_UART_DATA_REG); + if (input) + return (data & AR933X_UART_DATA_RX_CSR) ? 1 : 0; + else + return (data & AR933X_UART_DATA_TX_CSR) ? 0 : 1; +} + +static int ar933x_serial_probe(struct udevice *dev) +{ + struct ar933x_serial_priv *priv = dev_get_priv(dev); + fdt_addr_t addr; + u32 val; + + addr = dev_get_addr(dev); + if (addr == FDT_ADDR_T_NONE) + return -EINVAL; + + priv->regs = map_physmem(addr, AR933X_UART_SIZE, + MAP_NOCACHE); + + /* + * UART controller configuration: + * - no DMA + * - no interrupt + * - DCE mode + * - no flow control + * - set RX ready oride + * - set TX ready oride + */ + val = (AR933X_UART_CS_IF_MODE_DCE << AR933X_UART_CS_IF_MODE_S) | + AR933X_UART_CS_TX_RDY_ORIDE | AR933X_UART_CS_RX_RDY_ORIDE; + writel(val, priv->regs + AR933X_UART_CS_REG); + return 0; +} + +static const struct dm_serial_ops ar933x_serial_ops = { + .putc = ar933x_serial_putc, + .pending = ar933x_serial_pending, + .getc = ar933x_serial_getc, + .setbrg = ar933x_serial_setbrg, +}; + +static const struct udevice_id ar933x_serial_ids[] = { + { .compatible = "qca,ar9330-uart" }, + { } +}; + +U_BOOT_DRIVER(serial_ar933x) = { + .name = "serial_ar933x", + .id = UCLASS_SERIAL, + .of_match = ar933x_serial_ids, + .priv_auto_alloc_size = sizeof(struct ar933x_serial_priv), + .probe = ar933x_serial_probe, + .ops = &ar933x_serial_ops, + .flags = DM_FLAG_PRE_RELOC, +}; + +#ifdef CONFIG_DEBUG_UART_AR933X + +#include <debug_uart.h> + +static inline void _debug_uart_init(void) +{ + void __iomem *regs = (void *)CONFIG_DEBUG_UART_BASE; + u32 val, scale, step; + + /* + * UART controller configuration: + * - no DMA + * - no interrupt + * - DCE mode + * - no flow control + * - set RX ready oride + * - set TX ready oride + */ + val = (AR933X_UART_CS_IF_MODE_DCE << AR933X_UART_CS_IF_MODE_S) | + AR933X_UART_CS_TX_RDY_ORIDE | AR933X_UART_CS_RX_RDY_ORIDE; + writel(val, regs + AR933X_UART_CS_REG); + + ar933x_serial_get_scale_step(CONFIG_DEBUG_UART_CLOCK, + CONFIG_BAUDRATE, &scale, &step); + + val = (scale & AR933X_UART_CLK_SCALE_M) + << AR933X_UART_CLK_SCALE_S; + val |= (step & AR933X_UART_CLK_STEP_M) + << AR933X_UART_CLK_STEP_S; + writel(val, regs + AR933X_UART_CLK_REG); +} + +static inline void _debug_uart_putc(int c) +{ + void __iomem *regs = (void *)CONFIG_DEBUG_UART_BASE; + u32 data; + + do { + data = readl(regs + AR933X_UART_DATA_REG); + } while (!(data & AR933X_UART_DATA_TX_CSR)); + + data = (u32)c | AR933X_UART_DATA_TX_CSR; + writel(data, regs + AR933X_UART_DATA_REG); +} + +DEBUG_UART_FUNCS + +#endif |
