summaryrefslogtreecommitdiffstats
path: root/arch
Commit message (Collapse)AuthorAgeFilesLines
* x86: Drop all the old pin configuration codeSimon Glass2016-03-171-141/+0
| | | | | | | | We don't need this anymore - we can use device tree and the new pinconfig driver instead. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Add an ICH6 pin configuration driverSimon Glass2016-03-173-0/+218
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a driver which sets up the pin configuration on x86 devices with an ICH6 (or later) Platform Controller Hub. The driver is not in the pinctrl uclass due to some oddities of the way x86 devices work: - The GPIO controller is not present in I/O space until it is set up - This is done by writing a register in the PCH - The PCH has a driver which itself uses PCI, another driver - The pinctrl uclass requires that a pinctrl device be available before any other device can be probed It would be possible to work around the limitations by: - Hard-coding the GPIO address rather than reading it from the PCH - Using special x86 PCI access to set the GPIO address in the PCH However it is not clear that this is better, since the pin configuration driver does not actually provide normal pin configuration services - it simply sets up all the pins statically when probed. While this remains the case, it seems better to use a syscon uclass instead. This can be probed whenever it is needed, without any limitations. Also add an 'invert' property to support inverting the input. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: link: Add pin configuration to the device treeSimon Glass2016-03-171-0/+155
| | | | | | | | | | | | At present pin configuration on link does not use the standard mechanism, but some rather ugly custom code. As a first step to resolving this, add the pin configuration to the device tree. Four of the GPIOs must be available before relocation (for SDRAM pin strapping). Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Update microcode for secondary CPUsSimon Glass2016-03-175-2/+12
| | | | | | | | Each CPU needs to have its microcode loaded. Add support for this so that all CPUs will have the same version. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: ivybridge: Show microcode version for each coreSimon Glass2016-03-171-1/+2
| | | | | | | | Enable the microcode feature so that the microcode version is shown with the 'cpu detail' command. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Record the CPU details when starting each coreSimon Glass2016-03-173-1/+20
| | | | | | | | As each core starts up, record its microcode version and CPU ID so these can be presented with the 'cpu detail' command. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Move common MRC Kconfig options to the common fileSimon Glass2016-03-172-26/+62
| | | | | | | | At present the MRC options are private to ivybridge. Other Intel CPUs also use these settings. Move them to a common place. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Allow I/O functions to use pointersSimon Glass2016-03-171-2/+10
| | | | | | | | | | | | | | | | | | | | | It is common with memory-mapped I/O to use the address of a structure member to access memory, as in: struct some_regs { u32 ctrl; u32 data; } struct some_regs *regs = (struct some_regs *)BASE_ADDRESS; writel(1, &reg->ctrl); writel(2, &reg->data); This does not currently work with inl(), outl(), etc. Add a cast to permit this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Add macros to clear and set I/O bitsSimon Glass2016-03-171-0/+22
| | | | | | | | | | The clrsetbits_...() macros are useful for working with memory mapped I/O. But they do not work with I/O space, as used on x86 machines. Add some macros to provide similar features for I/O. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: ivybridge: Drop sandybridge_early_init()Simon Glass2016-03-171-2/+0
| | | | | | | | This function was removed in the previous clean-up. Drop it from the header file also. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Move Intel Management Engine code to a common placeSimon Glass2016-03-1710-369/+418
| | | | | | | | | | Some of the Intel ME code is common to several Intel CPUs. Move it into a common location. Add a header file for report_platform.c also. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> [squashed in http://patchwork.ozlabs.org/patch/598372/] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Rename PORT_RESET to IO_PORT_RESETSimon Glass2016-03-173-5/+5
| | | | | | | This same name is used in USB. Add a prefix to distinguish it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Move common CPU code to its own placeSimon Glass2016-03-176-76/+162
| | | | | | | | Some of the Intel CPU code is common to several Intel CPUs. Move it into a common location along with required declarations. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Move common LPC code to its own placeSimon Glass2016-03-176-85/+166
| | | | | | | | Some of the LPC code is common to several Intel LPC devices. Move it into a common location. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Add the root-complex block to common intel registersSimon Glass2016-03-174-7/+9
| | | | | | | | This is similar to MCH in that it is used in various drivers. Add it to the common header. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Create a common header for Intel register accessSimon Glass2016-03-176-6/+22
| | | | | | | | | | | | | | There are several blocks of registers that are accessed from all over the code on Intel CPUs. These don't currently have their own driver and it is not clear whether having a driver makes sense. An example is the Memory Controller Hub (MCH). We map it to a known location on some Intel chips (mostly those without FSP - Firmware Support Package). Add a new header file for these registers, and move MCH into it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Move microcode code to a common locationSimon Glass2016-03-176-4/+8
| | | | | | | This code is used on several Intel CPUs. Move it into a common location. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Move cache-as-RAM code into a common locationSimon Glass2016-03-174-1/+8
| | | | | | | | This cache-as-RAM (CAR) code is common to several Intel chips. Create a new intel_common directory and move it in there. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: cpu: Add functions to return the family and steppingSimon Glass2016-03-172-0/+24
| | | | | | | | These two identifiers can be useful for drivers which need to adjust their behaviour depending on the CPU family or stepping (revision). Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: broadwell: Add a few microcode filesSimon Glass2016-03-172-0/+2272
| | | | | | | Add two microcode files for broadwell. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Add comments to the SIPI vectorSimon Glass2016-03-172-0/+2
| | | | | | | | | The Intel SIPI (start-up inter-processor interrupt) vector is the entry point for each secondary CPU (also called an AP - applications processor). The assembler and C code are linked, so add comments to indicate this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Tidy up mp_init to reduce duplicationSimon Glass2016-03-171-53/+26
| | | | | | | | | The timeout step is always 50us. By updating apic_wait_timeout() to print the debug messages we can simplify the code. Also tidy up a few messages and comments while we are here. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Correct duplicate POST valuesSimon Glass2016-03-171-2/+2
| | | | | | | Two power-on-self-test values are the same. Fix this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: gpio: Correct GPIO setup orderingSimon Glass2016-03-171-0/+5
| | | | | | | | | | | | | The Intel GPIO driver can set up the GPIO pin mapping when the first GPIO is probed. However, it assumes that the first GPIO to be probed is in the first GPIO bank. If this is not the case then the init will write to the wrong registers. Fix this. Also add a note that this code is deprecated. We should move to using device tree instead. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: dts: link: Add board ID GPIOsSimon Glass2016-03-171-0/+2
| | | | | | | | At present the board ID GPIOs are hard-coded. Move them to the device tree so that we can use general SDRAM init code. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: dts: link: Move SPD info into the memory controllerSimon Glass2016-03-171-111/+110
| | | | | | | | | | | The SDRAM SPD (Serial Presence Detect) information should be contained with the SDRAM controller. This makes it easier for the controller to access it and removes the need for a separate compatible string. As a first step, move the information. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: link: Add required GPIO propertiesSimon Glass2016-03-171-3/+9
| | | | | | | | In order to use GPIO phandles we need to add some GPIO properties as specified by the GPIO bindings. Add these for link. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Add some more common MSR indexesSimon Glass2016-03-173-20/+43
| | | | | | | | | Many of the model-specific indexes are common to several Intel CPUs. Add some more common ones, and remove them from the ivybridge-specific header file. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: cpu: Make the vendor table constSimon Glass2016-03-171-1/+1
| | | | | | | This does not need to be modified at run-time, so make it const. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Support booting SeaBIOSBin Meng2016-03-173-0/+28
| | | | | | | | | | | | | | | SeaBIOS is an open source implementation of a 16-bit x86 BIOS. It can run in an emulator or natively on x86 hardware with the use of coreboot. With SeaBIOS's help, we can boot some OSes that require 16-bit BIOS services like Windows/DOS. As U-Boot, we have to manually create a table where SeaBIOS gets system information (eg: E820) from. The table unfortunately has to follow the coreboot table format as SeaBIOS currently supports booting as a coreboot payload. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* x86: Implement functions for writing coreboot tableBin Meng2016-03-173-0/+147
| | | | | | | | To prepare generating coreboot table from U-Boot, implement functions to handle the writing. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* x86: Support writing configuration tables in high areaBin Meng2016-03-171-0/+11
| | | | | | | | | | For those secondary bootloaders like SeaBIOS who want to live in the F segment, which conflicts the configuration table address, now we allow write_tables() to write the configuration tables in high area (malloc'ed memory). Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* x86: Simplify codes in write_tables()Bin Meng2016-03-171-27/+34
| | | | | | | | Given all table write routines have the same signature, we can simplify the codes by using a function table. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* x86: Change write_acpi_tables() signature a little bitBin Meng2016-03-173-6/+5
| | | | | | | | Change the parameter and return value of write_acpi_tables() to u32 to conform with other table write routines. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* x86: Use a macro for ROM table alignmentBin Meng2016-03-172-5/+7
| | | | | | | Define ROM_TABLE_ALIGN instead of using 1024 directly. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* x86: Change to use start/end address pair in write_tables()Bin Meng2016-03-171-6/+12
| | | | | | | | Add a new variable rom_table_start and pass it to ROM table write routines. This reads better than previous single rom_table_end. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* x86: Clean up coreboot_tables.hBin Meng2016-03-171-73/+80
| | | | | | | | | Clean up this file a little bit: - Remove inclusion of <linux/compiler.h> - Use tab in the macro definition Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* x86: Move sysinfo related to sysinfo.hBin Meng2016-03-172-4/+2
| | | | | | | | coreboot_tables.h should not include sysinfo related stuff. Move those to asm/arch-coreboot/sysinfo.h. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* x86: Move asm/arch-coreboot/tables.h to a common placeBin Meng2016-03-174-3/+1
| | | | | | | | Move asm/arch-coreboot/tables.h to asm/coreboot_tables.h so that coreboot table definitions can be used by other x86 builds. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* spl: arm: Make sure to include all of the u_boot_list entriesTom Rini2016-03-165-15/+9
| | | | | | | | | | | | | | Starting with 96e5b03 we use a linker list for partition table information. However since we use this in SPL we need to make sure that the SPL linker scripts include these as well. While doing this, it's best to simply include all linker lists to future proof ourselves. Cc: Andreas Bießmann <andreas.devel@googlemail.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reported-by: Nishanth Menon <nm@ti.com> Tested-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tom Rini <trini@konsulko.com>
* arm: omap-common: Guard some parts of the code with CONFIG_OMAP44XX/OMAP54XXTom Rini2016-03-161-1/+7
| | | | | | | | | | On OMAP4 platforms that also need to calculate their DDR settings we are now getting very close to the linker limit size. Since OMAP44XX is only seen with LPDDR2, remove some run time tests for LPDDR2 or DDR3 as we will know that we don't have it for OMAP44XX. Cc: Nishanth Menon <nm@ti.com> Signed-off-by: Tom Rini <trini@konsulko.com>
* ARM: keystone2: Only link cmd_ddr3.o on non-SPL buildsTom Rini2016-03-161-1/+2
| | | | | | | | | | | | When we switch to including all linker lists in SPL it is important to not include commands as that may lead to link errors due to other things we have already discarded. In this case simply move cmd_ddr3.o over to the list with the rest. Cc: Vitaly Andrianov <vitalya@ti.com> Cc: Nishanth Menon <nm@ti.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tom Rini <trini@konsulko.com>
* ARM: keystone2: Switch to using the poweroff commandTom Rini2016-03-164-29/+30
| | | | | | | | | | Now that we have a standard way to power off the hardware, switch to using that rather than our own command. Cc: Vitaly Andrianov <vitalya@ti.com> Cc: Nishanth Menon <nm@ti.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tom Rini <trini@konsulko.com>
* ARM: keystone2: Split monitor code / command codeTom Rini2016-03-164-52/+71
| | | | | | | | | | | | When we switch to including all linker lists in SPL it is important to not include commands as that may lead to link errors due to other things we have already discarded. In this case, we split the code for supporting the monitor out from the code for loading it. Cc: Vitaly Andrianov <vitalya@ti.com> Cc: Nishanth Menon <nm@ti.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tom Rini <trini@konsulko.com>
* ARM: DRA7: DDR: Enable SR in Power Management ControlNishanth Menon2016-03-151-3/+3
| | | | | | | | | | | | | | If EMIF is idle for certain amount of DDR cycles, EMIF will put the DDR in self refresh mode to save power if EMIF_PWR_MGMT_CTRL register is programmed. And also before entering suspend-resume ddr needs to be put in self-refresh. Linux kernel does not program this register before entering suspend and relies on u-boot setting. So configuring it in u-boot. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Tested-by: Tom Rini <trini@konsulko.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* arm: Allow EFI payload code to take exceptionsAlexander Graf2016-03-151-0/+8
| | | | | | | | | | | | | | | There are 2 ways an EFI payload could return into u-boot: - Callback function - Exception While in EFI payload mode, r9 is owned by the payload and may not contain a valid pointer to gd, so we need to fix it up. We do that properly for the payload to callback path already. This patch also adds gd pointer restoral for the exception path. Signed-off-by: Alexander Graf <agraf@suse.de>
* arm64: Allow EFI payload code to take exceptionsAlexander Graf2016-03-151-0/+9
| | | | | | | | | | | | | | | There are 2 ways an EFI payload could return into u-boot: - Callback function - Exception While in EFI payload mode, x18 is owned by the payload and may not contain a valid pointer to gd, so we need to fix it up. We do that properly for the payload to callback path already. This patch also adds gd pointer restoral for the exception path. Signed-off-by: Alexander Graf <agraf@suse.de>
* arm64: Allow exceptions to returnAlexander Graf2016-03-151-0/+34
| | | | | | | | | | | | | | Our current arm64 exception handlers all panic and never return to the exception triggering code. But if any handler wanted to continue execution after fixups, it would need help from the exception handling code to restore all registers. This patch implements that help. With this code, exception handlers on aarch64 can successfully return to the place the exception happened (or somewhere else if they modify elr). Signed-off-by: Alexander Graf <agraf@suse.de>
* efi_loader: Add runtime servicesAlexander Graf2016-03-154-0/+54
| | | | | | | | | | | | | | | | | After booting has finished, EFI allows firmware to still interact with the OS using the "runtime services". These callbacks live in a separate address space, since they are available long after U-Boot has been overwritten by the OS. This patch adds enough framework for arbitrary code inside of U-Boot to become a runtime service with the right section attributes set. For now, we don't make use of it yet though. We could maybe in the future map U-boot environment variables to EFI variables here. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
* arm64: Only allow dcache disabled in SPL buildsAlexander Graf2016-03-151-0/+9
| | | | | | | | | Now that we have an easy way to describe memory regions and enable the MMU, there really shouldn't be anything holding people back from running with caches enabled on AArch64. To make sure people catch early if they're missing on the caching fun, give them a compile error. Signed-off-by: Alexander Graf <agraf@suse.de>
OpenPOWER on IntegriCloud