diff options
Diffstat (limited to 'include/configs/colibri_pxa270.h')
| -rw-r--r-- | include/configs/colibri_pxa270.h | 77 |
1 files changed, 40 insertions, 37 deletions
diff --git a/include/configs/colibri_pxa270.h b/include/configs/colibri_pxa270.h index 08bd276b44..7fc364e838 100644 --- a/include/configs/colibri_pxa270.h +++ b/include/configs/colibri_pxa270.h @@ -2,18 +2,22 @@ * Toradex Colibri PXA270 configuration file * * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com> + * Copyright (C) 2015 Marcel Ziswiler <marcel@ziswiler.com> * * SPDX-License-Identifier: GPL-2.0+ */ -#ifndef __CONFIG_H -#define __CONFIG_H +#ifndef __CONFIG_H +#define __CONFIG_H /* * High Level Board Configuration Options */ #define CONFIG_CPU_PXA27X 1 /* Marvell PXA270 CPU */ +#define CONFIG_SYS_GENERIC_BOARD #define CONFIG_SYS_TEXT_BASE 0x0 +/* Avoid overwriting factory configuration block */ +#define CONFIG_BOARD_SIZE_LIMIT 0x40000 /* * Environment settings @@ -22,13 +26,13 @@ #define CONFIG_SYS_MALLOC_LEN (128 * 1024) #define CONFIG_ARCH_CPU_INIT #define CONFIG_BOOTCOMMAND \ - "if mmc init && fatload mmc 0 0xa0000000 uImage; then " \ + "if fatload mmc 0 0xa0000000 uImage; then " \ "bootm 0xa0000000; " \ "fi; " \ "if usb reset && fatload usb 0 0xa0000000 uImage; then " \ "bootm 0xa0000000; " \ "fi; " \ - "bootm 0x80000;" + "bootm 0xc0000;" #define CONFIG_BOOTARGS "console=tty0 console=ttyS0,115200" #define CONFIG_TIMESTAMP #define CONFIG_BOOTDELAY 2 /* Autoboot delay */ @@ -50,6 +54,8 @@ */ #include <config_cmd_default.h> +#undef CONFIG_CMD_LOADB /* Both together */ +#undef CONFIG_CMD_LOADS /* saves 10 KB */ #define CONFIG_CMD_NET #define CONFIG_CMD_ENV #undef CONFIG_CMD_IMLS @@ -59,7 +65,6 @@ /* * Networking Configuration - * chip on the Voipac PXA270 board */ #ifdef CONFIG_CMD_NET #define CONFIG_CMD_PING @@ -82,7 +87,7 @@ */ #define CONFIG_SYS_HUSH_PARSER 1 -#define CONFIG_SYS_LONGHELP +#undef CONFIG_SYS_LONGHELP /* Saves 10 KB */ #ifdef CONFIG_SYS_HUSH_PARSER #define CONFIG_SYS_PROMPT "$ " #else @@ -96,7 +101,6 @@ #define CONFIG_CMDLINE_EDITING 1 #define CONFIG_AUTO_COMPLETE 1 - /* * Clock Configuration */ @@ -142,25 +146,24 @@ #else /* No flash */ #define CONFIG_SYS_NO_FLASH -#define CONFIG_SYS_ENV_IS_NOWHERE +#define CONFIG_ENV_IS_NOWHERE #endif #define CONFIG_SYS_MONITOR_BASE 0x0 -#define CONFIG_SYS_MONITOR_LEN 0x80000 +#define CONFIG_SYS_MONITOR_LEN 0x40000 +/* Skip factory configuration block */ #define CONFIG_ENV_ADDR \ - (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) + (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN + 0x40000) #define CONFIG_ENV_SIZE 0x40000 #define CONFIG_ENV_SECT_SIZE 0x40000 -#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) /* * GPIO settings */ #define CONFIG_SYS_GPSR0_VAL 0x00000000 #define CONFIG_SYS_GPSR1_VAL 0x00020000 -#define CONFIG_SYS_GPSR2_VAL 0x0002C000 +#define CONFIG_SYS_GPSR2_VAL 0x0002c000 #define CONFIG_SYS_GPSR3_VAL 0x00000000 #define CONFIG_SYS_GPCR0_VAL 0x00000000 @@ -168,19 +171,19 @@ #define CONFIG_SYS_GPCR2_VAL 0x00000000 #define CONFIG_SYS_GPCR3_VAL 0x00000000 -#define CONFIG_SYS_GPDR0_VAL 0x08000000 -#define CONFIG_SYS_GPDR1_VAL 0x0002A981 -#define CONFIG_SYS_GPDR2_VAL 0x0202FC00 -#define CONFIG_SYS_GPDR3_VAL 0x00000000 +#define CONFIG_SYS_GPDR0_VAL 0xc8008000 +#define CONFIG_SYS_GPDR1_VAL 0xfc02a981 +#define CONFIG_SYS_GPDR2_VAL 0x92c3ffff +#define CONFIG_SYS_GPDR3_VAL 0x0061e804 -#define CONFIG_SYS_GAFR0_L_VAL 0x00100000 -#define CONFIG_SYS_GAFR0_U_VAL 0x00C00010 -#define CONFIG_SYS_GAFR1_L_VAL 0x999A901A -#define CONFIG_SYS_GAFR1_U_VAL 0xAAA00008 -#define CONFIG_SYS_GAFR2_L_VAL 0xAAAAAAAA -#define CONFIG_SYS_GAFR2_U_VAL 0x0109A000 -#define CONFIG_SYS_GAFR3_L_VAL 0x54000300 -#define CONFIG_SYS_GAFR3_U_VAL 0x00024001 +#define CONFIG_SYS_GAFR0_L_VAL 0x80100000 +#define CONFIG_SYS_GAFR0_U_VAL 0xa5c00010 +#define CONFIG_SYS_GAFR1_L_VAL 0x6992901a +#define CONFIG_SYS_GAFR1_U_VAL 0xaaa50008 +#define CONFIG_SYS_GAFR2_L_VAL 0xaaaaaaaa +#define CONFIG_SYS_GAFR2_U_VAL 0x4109a002 +#define CONFIG_SYS_GAFR3_L_VAL 0x54000310 +#define CONFIG_SYS_GAFR3_U_VAL 0x00005401 #define CONFIG_SYS_PSSR_VAL 0x30 @@ -193,26 +196,26 @@ /* * Memory settings */ -#define CONFIG_SYS_MSC0_VAL 0x000095f2 -#define CONFIG_SYS_MSC1_VAL 0x00007ff4 -#define CONFIG_SYS_MSC2_VAL 0x00000000 -#define CONFIG_SYS_MDCNFG_VAL 0x08000ac9 -#define CONFIG_SYS_MDREFR_VAL 0x2013e01e -#define CONFIG_SYS_MDMRS_VAL 0x00320032 -#define CONFIG_SYS_FLYCNFG_VAL 0x00000000 +#define CONFIG_SYS_MSC0_VAL 0x9ee1c5f2 +#define CONFIG_SYS_MSC1_VAL 0x9ee1f994 +#define CONFIG_SYS_MSC2_VAL 0x9ee19ee1 +#define CONFIG_SYS_MDCNFG_VAL 0x090009c9 +#define CONFIG_SYS_MDREFR_VAL 0x2003a031 +#define CONFIG_SYS_MDMRS_VAL 0x00220022 +#define CONFIG_SYS_FLYCNFG_VAL 0x00010001 #define CONFIG_SYS_SXCNFG_VAL 0x40044004 /* * PCMCIA and CF Interfaces */ -#define CONFIG_SYS_MECR_VAL 0x00000001 -#define CONFIG_SYS_MCMEM0_VAL 0x00014307 +#define CONFIG_SYS_MECR_VAL 0x00000000 +#define CONFIG_SYS_MCMEM0_VAL 0x00028307 #define CONFIG_SYS_MCMEM1_VAL 0x00014307 -#define CONFIG_SYS_MCATT0_VAL 0x0001c787 +#define CONFIG_SYS_MCATT0_VAL 0x00038787 #define CONFIG_SYS_MCATT1_VAL 0x0001c787 -#define CONFIG_SYS_MCIO0_VAL 0x0001430f +#define CONFIG_SYS_MCIO0_VAL 0x0002830f #define CONFIG_SYS_MCIO1_VAL 0x0001430f #include "pxa-common.h" -#endif /* __CONFIG_H */ +#endif /* __CONFIG_H */ |
