diff options
Diffstat (limited to 'drivers/video/exynos/exynos_fb.c')
| -rw-r--r-- | drivers/video/exynos/exynos_fb.c | 720 |
1 files changed, 720 insertions, 0 deletions
diff --git a/drivers/video/exynos/exynos_fb.c b/drivers/video/exynos/exynos_fb.c new file mode 100644 index 0000000000..97228cd3cc --- /dev/null +++ b/drivers/video/exynos/exynos_fb.c @@ -0,0 +1,720 @@ +/* + * Copyright (C) 2012 Samsung Electronics + * + * Author: InKi Dae <inki.dae@samsung.com> + * Author: Donghwa Lee <dh09.lee@samsung.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <config.h> +#include <common.h> +#include <display.h> +#include <div64.h> +#include <dm.h> +#include <fdtdec.h> +#include <libfdt.h> +#include <panel.h> +#include <video.h> +#include <video_bridge.h> +#include <asm/io.h> +#include <asm/arch/cpu.h> +#include <asm/arch/clock.h> +#include <asm/arch/clk.h> +#include <asm/arch/mipi_dsim.h> +#include <asm/arch/dp_info.h> +#include <asm/arch/fb.h> +#include <asm/arch/pinmux.h> +#include <asm/arch/system.h> +#include <asm/gpio.h> +#include <asm-generic/errno.h> + +DECLARE_GLOBAL_DATA_PTR; + +enum { + FIMD_RGB_INTERFACE = 1, + FIMD_CPU_INTERFACE = 2, +}; + +enum exynos_fb_rgb_mode_t { + MODE_RGB_P = 0, + MODE_BGR_P = 1, + MODE_RGB_S = 2, + MODE_BGR_S = 3, +}; + +struct exynos_fb_priv { + ushort vl_col; /* Number of columns (i.e. 640) */ + ushort vl_row; /* Number of rows (i.e. 480) */ + ushort vl_rot; /* Rotation of Display (0, 1, 2, 3) */ + ushort vl_width; /* Width of display area in millimeters */ + ushort vl_height; /* Height of display area in millimeters */ + + /* LCD configuration register */ + u_char vl_freq; /* Frequency */ + u_char vl_clkp; /* Clock polarity */ + u_char vl_oep; /* Output Enable polarity */ + u_char vl_hsp; /* Horizontal Sync polarity */ + u_char vl_vsp; /* Vertical Sync polarity */ + u_char vl_dp; /* Data polarity */ + u_char vl_bpix; /* Bits per pixel */ + + /* Horizontal control register. Timing from data sheet */ + u_char vl_hspw; /* Horz sync pulse width */ + u_char vl_hfpd; /* Wait before of line */ + u_char vl_hbpd; /* Wait end of line */ + + /* Vertical control register. */ + u_char vl_vspw; /* Vertical sync pulse width */ + u_char vl_vfpd; /* Wait before of frame */ + u_char vl_vbpd; /* Wait end of frame */ + u_char vl_cmd_allow_len; /* Wait end of frame */ + + unsigned int win_id; + unsigned int init_delay; + unsigned int power_on_delay; + unsigned int reset_delay; + unsigned int interface_mode; + unsigned int mipi_enabled; + unsigned int dp_enabled; + unsigned int cs_setup; + unsigned int wr_setup; + unsigned int wr_act; + unsigned int wr_hold; + unsigned int logo_on; + unsigned int logo_width; + unsigned int logo_height; + int logo_x_offset; + int logo_y_offset; + unsigned long logo_addr; + unsigned int rgb_mode; + unsigned int resolution; + + /* parent clock name(MPLL, EPLL or VPLL) */ + unsigned int pclk_name; + /* ratio value for source clock from parent clock. */ + unsigned int sclk_div; + + unsigned int dual_lcd_enabled; + struct exynos_fb *reg; + struct exynos_platform_mipi_dsim *dsim_platform_data_dt; +}; + +static void exynos_fimd_set_dualrgb(struct exynos_fb_priv *priv, bool enabled) +{ + struct exynos_fb *reg = priv->reg; + unsigned int cfg = 0; + + if (enabled) { + cfg = EXYNOS_DUALRGB_BYPASS_DUAL | EXYNOS_DUALRGB_LINESPLIT | + EXYNOS_DUALRGB_VDEN_EN_ENABLE; + + /* in case of Line Split mode, MAIN_CNT doesn't neet to set. */ + cfg |= EXYNOS_DUALRGB_SUB_CNT(priv->vl_col / 2) | + EXYNOS_DUALRGB_MAIN_CNT(0); + } + + writel(cfg, ®->dualrgb); +} + +static void exynos_fimd_set_dp_clkcon(struct exynos_fb_priv *priv, + unsigned int enabled) +{ + struct exynos_fb *reg = priv->reg; + unsigned int cfg = 0; + + if (enabled) + cfg = EXYNOS_DP_CLK_ENABLE; + + writel(cfg, ®->dp_mie_clkcon); +} + +static void exynos_fimd_set_par(struct exynos_fb_priv *priv, + unsigned int win_id) +{ + struct exynos_fb *reg = priv->reg; + unsigned int cfg = 0; + + /* set window control */ + cfg = readl((unsigned int)®->wincon0 + + EXYNOS_WINCON(win_id)); + + cfg &= ~(EXYNOS_WINCON_BITSWP_ENABLE | EXYNOS_WINCON_BYTESWP_ENABLE | + EXYNOS_WINCON_HAWSWP_ENABLE | EXYNOS_WINCON_WSWP_ENABLE | + EXYNOS_WINCON_BURSTLEN_MASK | EXYNOS_WINCON_BPPMODE_MASK | + EXYNOS_WINCON_INRGB_MASK | EXYNOS_WINCON_DATAPATH_MASK); + + /* DATAPATH is DMA */ + cfg |= EXYNOS_WINCON_DATAPATH_DMA; + + cfg |= EXYNOS_WINCON_HAWSWP_ENABLE; + + /* dma burst is 16 */ + cfg |= EXYNOS_WINCON_BURSTLEN_16WORD; + + switch (priv->vl_bpix) { + case 4: + cfg |= EXYNOS_WINCON_BPPMODE_16BPP_565; + break; + default: + cfg |= EXYNOS_WINCON_BPPMODE_24BPP_888; + break; + } + + writel(cfg, (unsigned int)®->wincon0 + + EXYNOS_WINCON(win_id)); + + /* set window position to x=0, y=0*/ + cfg = EXYNOS_VIDOSD_LEFT_X(0) | EXYNOS_VIDOSD_TOP_Y(0); + writel(cfg, (unsigned int)®->vidosd0a + + EXYNOS_VIDOSD(win_id)); + + cfg = EXYNOS_VIDOSD_RIGHT_X(priv->vl_col - 1) | + EXYNOS_VIDOSD_BOTTOM_Y(priv->vl_row - 1) | + EXYNOS_VIDOSD_RIGHT_X_E(1) | + EXYNOS_VIDOSD_BOTTOM_Y_E(0); + + writel(cfg, (unsigned int)®->vidosd0b + + EXYNOS_VIDOSD(win_id)); + + /* set window size for window0*/ + cfg = EXYNOS_VIDOSD_SIZE(priv->vl_col * priv->vl_row); + writel(cfg, (unsigned int)®->vidosd0c + + EXYNOS_VIDOSD(win_id)); +} + +static void exynos_fimd_set_buffer_address(struct exynos_fb_priv *priv, + unsigned int win_id, + ulong lcd_base_addr) +{ + struct exynos_fb *reg = priv->reg; + unsigned long start_addr, end_addr; + + start_addr = lcd_base_addr; + end_addr = start_addr + ((priv->vl_col * (VNBITS(priv->vl_bpix) / 8)) * + priv->vl_row); + + writel(start_addr, (unsigned int)®->vidw00add0b0 + + EXYNOS_BUFFER_OFFSET(win_id)); + writel(end_addr, (unsigned int)®->vidw00add1b0 + + EXYNOS_BUFFER_OFFSET(win_id)); +} + +static void exynos_fimd_set_clock(struct exynos_fb_priv *priv) +{ + struct exynos_fb *reg = priv->reg; + unsigned int cfg = 0, div = 0, remainder, remainder_div; + unsigned long pixel_clock; + unsigned long long src_clock; + + if (priv->dual_lcd_enabled) { + pixel_clock = priv->vl_freq * + (priv->vl_hspw + priv->vl_hfpd + + priv->vl_hbpd + priv->vl_col / 2) * + (priv->vl_vspw + priv->vl_vfpd + + priv->vl_vbpd + priv->vl_row); + } else if (priv->interface_mode == FIMD_CPU_INTERFACE) { + pixel_clock = priv->vl_freq * + priv->vl_width * priv->vl_height * + (priv->cs_setup + priv->wr_setup + + priv->wr_act + priv->wr_hold + 1); + } else { + pixel_clock = priv->vl_freq * + (priv->vl_hspw + priv->vl_hfpd + + priv->vl_hbpd + priv->vl_col) * + (priv->vl_vspw + priv->vl_vfpd + + priv->vl_vbpd + priv->vl_row); + } + + cfg = readl(®->vidcon0); + cfg &= ~(EXYNOS_VIDCON0_CLKSEL_MASK | EXYNOS_VIDCON0_CLKVALUP_MASK | + EXYNOS_VIDCON0_CLKVAL_F(0xFF) | EXYNOS_VIDCON0_VCLKEN_MASK | + EXYNOS_VIDCON0_CLKDIR_MASK); + cfg |= (EXYNOS_VIDCON0_CLKSEL_SCLK | EXYNOS_VIDCON0_CLKVALUP_ALWAYS | + EXYNOS_VIDCON0_VCLKEN_NORMAL | EXYNOS_VIDCON0_CLKDIR_DIVIDED); + + src_clock = (unsigned long long) get_lcd_clk(); + + /* get quotient and remainder. */ + remainder = do_div(src_clock, pixel_clock); + div = src_clock; + + remainder *= 10; + remainder_div = remainder / pixel_clock; + + /* round about one places of decimals. */ + if (remainder_div >= 5) + div++; + + /* in case of dual lcd mode. */ + if (priv->dual_lcd_enabled) + div--; + + cfg |= EXYNOS_VIDCON0_CLKVAL_F(div - 1); + writel(cfg, ®->vidcon0); +} + +void exynos_set_trigger(struct exynos_fb_priv *priv) +{ + struct exynos_fb *reg = priv->reg; + unsigned int cfg = 0; + + cfg = readl(®->trigcon); + + cfg |= (EXYNOS_I80SOFT_TRIG_EN | EXYNOS_I80START_TRIG); + + writel(cfg, ®->trigcon); +} + +int exynos_is_i80_frame_done(struct exynos_fb_priv *priv) +{ + struct exynos_fb *reg = priv->reg; + unsigned int cfg = 0; + int status; + + cfg = readl(®->trigcon); + + /* frame done func is valid only when TRIMODE[0] is set to 1. */ + status = (cfg & EXYNOS_I80STATUS_TRIG_DONE) == + EXYNOS_I80STATUS_TRIG_DONE; + + return status; +} + +static void exynos_fimd_lcd_on(struct exynos_fb_priv *priv) +{ + struct exynos_fb *reg = priv->reg; + unsigned int cfg = 0; + + /* display on */ + cfg = readl(®->vidcon0); + cfg |= (EXYNOS_VIDCON0_ENVID_ENABLE | EXYNOS_VIDCON0_ENVID_F_ENABLE); + writel(cfg, ®->vidcon0); +} + +static void exynos_fimd_window_on(struct exynos_fb_priv *priv, + unsigned int win_id) +{ + struct exynos_fb *reg = priv->reg; + unsigned int cfg = 0; + + /* enable window */ + cfg = readl((unsigned int)®->wincon0 + + EXYNOS_WINCON(win_id)); + cfg |= EXYNOS_WINCON_ENWIN_ENABLE; + writel(cfg, (unsigned int)®->wincon0 + + EXYNOS_WINCON(win_id)); + + cfg = readl(®->winshmap); + cfg |= EXYNOS_WINSHMAP_CH_ENABLE(win_id); + writel(cfg, ®->winshmap); +} + +void exynos_fimd_lcd_off(struct exynos_fb_priv *priv) +{ + struct exynos_fb *reg = priv->reg; + unsigned int cfg = 0; + + cfg = readl(®->vidcon0); + cfg &= (EXYNOS_VIDCON0_ENVID_DISABLE | EXYNOS_VIDCON0_ENVID_F_DISABLE); + writel(cfg, ®->vidcon0); +} + +void exynos_fimd_window_off(struct exynos_fb_priv *priv, unsigned int win_id) +{ + struct exynos_fb *reg = priv->reg; + unsigned int cfg = 0; + + cfg = readl((unsigned int)®->wincon0 + + EXYNOS_WINCON(win_id)); + cfg &= EXYNOS_WINCON_ENWIN_DISABLE; + writel(cfg, (unsigned int)®->wincon0 + + EXYNOS_WINCON(win_id)); + + cfg = readl(®->winshmap); + cfg &= ~EXYNOS_WINSHMAP_CH_DISABLE(win_id); + writel(cfg, ®->winshmap); +} + +/* +* The reset value for FIMD SYSMMU register MMU_CTRL is 3 +* on Exynos5420 and newer versions. +* This means FIMD SYSMMU is on by default on Exynos5420 +* and newer versions. +* Since in u-boot we don't use SYSMMU, we should disable +* those FIMD SYSMMU. +* Note that there are 2 SYSMMU for FIMD: m0 and m1. +* m0 handles windows 0 and 4, and m1 handles windows 1, 2 and 3. +* We disable both of them here. +*/ +void exynos_fimd_disable_sysmmu(void) +{ + u32 *sysmmufimd; + unsigned int node; + int node_list[2]; + int count; + int i; + + count = fdtdec_find_aliases_for_id(gd->fdt_blob, "fimd", + COMPAT_SAMSUNG_EXYNOS_SYSMMU, node_list, 2); + for (i = 0; i < count; i++) { + node = node_list[i]; + if (node <= 0) { + debug("Can't get device node for fimd sysmmu\n"); + return; + } + + sysmmufimd = (u32 *)fdtdec_get_addr(gd->fdt_blob, node, "reg"); + if (!sysmmufimd) { + debug("Can't get base address for sysmmu fimdm0"); + return; + } + + writel(0x0, sysmmufimd); + } +} + +void exynos_fimd_lcd_init(struct udevice *dev) +{ + struct exynos_fb_priv *priv = dev_get_priv(dev); + struct video_uc_platdata *plat = dev_get_uclass_platdata(dev); + struct exynos_fb *reg = priv->reg; + unsigned int cfg = 0, rgb_mode; + unsigned int offset; + unsigned int node; + + node = dev->of_offset; + if (fdtdec_get_bool(gd->fdt_blob, node, "samsung,disable-sysmmu")) + exynos_fimd_disable_sysmmu(); + + offset = exynos_fimd_get_base_offset(); + + rgb_mode = priv->rgb_mode; + + if (priv->interface_mode == FIMD_RGB_INTERFACE) { + cfg |= EXYNOS_VIDCON0_VIDOUT_RGB; + writel(cfg, ®->vidcon0); + + cfg = readl(®->vidcon2); + cfg &= ~(EXYNOS_VIDCON2_WB_MASK | + EXYNOS_VIDCON2_TVFORMATSEL_MASK | + EXYNOS_VIDCON2_TVFORMATSEL_YUV_MASK); + cfg |= EXYNOS_VIDCON2_WB_DISABLE; + writel(cfg, ®->vidcon2); + + /* set polarity */ + cfg = 0; + if (!priv->vl_clkp) + cfg |= EXYNOS_VIDCON1_IVCLK_RISING_EDGE; + if (!priv->vl_hsp) + cfg |= EXYNOS_VIDCON1_IHSYNC_INVERT; + if (!priv->vl_vsp) + cfg |= EXYNOS_VIDCON1_IVSYNC_INVERT; + if (!priv->vl_dp) + cfg |= EXYNOS_VIDCON1_IVDEN_INVERT; + + writel(cfg, (unsigned int)®->vidcon1 + offset); + + /* set timing */ + cfg = EXYNOS_VIDTCON0_VFPD(priv->vl_vfpd - 1); + cfg |= EXYNOS_VIDTCON0_VBPD(priv->vl_vbpd - 1); + cfg |= EXYNOS_VIDTCON0_VSPW(priv->vl_vspw - 1); + writel(cfg, (unsigned int)®->vidtcon0 + offset); + + cfg = EXYNOS_VIDTCON1_HFPD(priv->vl_hfpd - 1); + cfg |= EXYNOS_VIDTCON1_HBPD(priv->vl_hbpd - 1); + cfg |= EXYNOS_VIDTCON1_HSPW(priv->vl_hspw - 1); + + writel(cfg, (unsigned int)®->vidtcon1 + offset); + + /* set lcd size */ + cfg = EXYNOS_VIDTCON2_HOZVAL(priv->vl_col - 1) | + EXYNOS_VIDTCON2_LINEVAL(priv->vl_row - 1) | + EXYNOS_VIDTCON2_HOZVAL_E(priv->vl_col - 1) | + EXYNOS_VIDTCON2_LINEVAL_E(priv->vl_row - 1); + + writel(cfg, (unsigned int)®->vidtcon2 + offset); + } + + /* set display mode */ + cfg = readl(®->vidcon0); + cfg &= ~EXYNOS_VIDCON0_PNRMODE_MASK; + cfg |= (rgb_mode << EXYNOS_VIDCON0_PNRMODE_SHIFT); + writel(cfg, ®->vidcon0); + + /* set par */ + exynos_fimd_set_par(priv, priv->win_id); + + /* set memory address */ + exynos_fimd_set_buffer_address(priv, priv->win_id, plat->base); + + /* set buffer size */ + cfg = EXYNOS_VIDADDR_PAGEWIDTH(priv->vl_col * + VNBITS(priv->vl_bpix) / 8) | + EXYNOS_VIDADDR_PAGEWIDTH_E(priv->vl_col * + VNBITS(priv->vl_bpix) / 8) | + EXYNOS_VIDADDR_OFFSIZE(0) | + EXYNOS_VIDADDR_OFFSIZE_E(0); + + writel(cfg, (unsigned int)®->vidw00add2 + + EXYNOS_BUFFER_SIZE(priv->win_id)); + + /* set clock */ + exynos_fimd_set_clock(priv); + + /* set rgb mode to dual lcd. */ + exynos_fimd_set_dualrgb(priv, priv->dual_lcd_enabled); + + /* display on */ + exynos_fimd_lcd_on(priv); + + /* window on */ + exynos_fimd_window_on(priv, priv->win_id); + + exynos_fimd_set_dp_clkcon(priv, priv->dp_enabled); +} + +unsigned long exynos_fimd_calc_fbsize(struct exynos_fb_priv *priv) +{ + return priv->vl_col * priv->vl_row * (VNBITS(priv->vl_bpix) / 8); +} + +int exynos_fb_ofdata_to_platdata(struct udevice *dev) +{ + struct exynos_fb_priv *priv = dev_get_priv(dev); + unsigned int node = dev->of_offset; + const void *blob = gd->fdt_blob; + fdt_addr_t addr; + + addr = dev_get_addr(dev); + if (addr == FDT_ADDR_T_NONE) { + debug("Can't get the FIMD base address\n"); + return -EINVAL; + } + priv->reg = (struct exynos_fb *)addr; + + priv->vl_col = fdtdec_get_int(blob, node, "samsung,vl-col", 0); + if (priv->vl_col == 0) { + debug("Can't get XRES\n"); + return -ENXIO; + } + + priv->vl_row = fdtdec_get_int(blob, node, "samsung,vl-row", 0); + if (priv->vl_row == 0) { + debug("Can't get YRES\n"); + return -ENXIO; + } + + priv->vl_width = fdtdec_get_int(blob, node, + "samsung,vl-width", 0); + + priv->vl_height = fdtdec_get_int(blob, node, + "samsung,vl-height", 0); + + priv->vl_freq = fdtdec_get_int(blob, node, "samsung,vl-freq", 0); + if (priv->vl_freq == 0) { + debug("Can't get refresh rate\n"); + return -ENXIO; + } + + if (fdtdec_get_bool(blob, node, "samsung,vl-clkp")) + priv->vl_clkp = VIDEO_ACTIVE_LOW; + + if (fdtdec_get_bool(blob, node, "samsung,vl-oep")) + priv->vl_oep = VIDEO_ACTIVE_LOW; + + if (fdtdec_get_bool(blob, node, "samsung,vl-hsp")) + priv->vl_hsp = VIDEO_ACTIVE_LOW; + + if (fdtdec_get_bool(blob, node, "samsung,vl-vsp")) + priv->vl_vsp = VIDEO_ACTIVE_LOW; + + if (fdtdec_get_bool(blob, node, "samsung,vl-dp")) + priv->vl_dp = VIDEO_ACTIVE_LOW; + + priv->vl_bpix = fdtdec_get_int(blob, node, "samsung,vl-bpix", 0); + if (priv->vl_bpix == 0) { + debug("Can't get bits per pixel\n"); + return -ENXIO; + } + + priv->vl_hspw = fdtdec_get_int(blob, node, "samsung,vl-hspw", 0); + if (priv->vl_hspw == 0) { + debug("Can't get hsync width\n"); + return -ENXIO; + } + + priv->vl_hfpd = fdtdec_get_int(blob, node, "samsung,vl-hfpd", 0); + if (priv->vl_hfpd == 0) { + debug("Can't get right margin\n"); + return -ENXIO; + } + + priv->vl_hbpd = (u_char)fdtdec_get_int(blob, node, + "samsung,vl-hbpd", 0); + if (priv->vl_hbpd == 0) { + debug("Can't get left margin\n"); + return -ENXIO; + } + + priv->vl_vspw = (u_char)fdtdec_get_int(blob, node, + "samsung,vl-vspw", 0); + if (priv->vl_vspw == 0) { + debug("Can't get vsync width\n"); + return -ENXIO; + } + + priv->vl_vfpd = fdtdec_get_int(blob, node, + "samsung,vl-vfpd", 0); + if (priv->vl_vfpd == 0) { + debug("Can't get lower margin\n"); + return -ENXIO; + } + + priv->vl_vbpd = fdtdec_get_int(blob, node, "samsung,vl-vbpd", 0); + if (priv->vl_vbpd == 0) { + debug("Can't get upper margin\n"); + return -ENXIO; + } + + priv->vl_cmd_allow_len = fdtdec_get_int(blob, node, + "samsung,vl-cmd-allow-len", 0); + + priv->win_id = fdtdec_get_int(blob, node, "samsung,winid", 0); + priv->init_delay = fdtdec_get_int(blob, node, + "samsung,init-delay", 0); + priv->power_on_delay = fdtdec_get_int(blob, node, + "samsung,power-on-delay", 0); + priv->reset_delay = fdtdec_get_int(blob, node, + "samsung,reset-delay", 0); + priv->interface_mode = fdtdec_get_int(blob, node, + "samsung,interface-mode", 0); + priv->mipi_enabled = fdtdec_get_int(blob, node, + "samsung,mipi-enabled", 0); + priv->dp_enabled = fdtdec_get_int(blob, node, + "samsung,dp-enabled", 0); + priv->cs_setup = fdtdec_get_int(blob, node, + "samsung,cs-setup", 0); + priv->wr_setup = fdtdec_get_int(blob, node, + "samsung,wr-setup", 0); + priv->wr_act = fdtdec_get_int(blob, node, "samsung,wr-act", 0); + priv->wr_hold = fdtdec_get_int(blob, node, "samsung,wr-hold", 0); + + priv->logo_on = fdtdec_get_int(blob, node, "samsung,logo-on", 0); + if (priv->logo_on) { + priv->logo_width = fdtdec_get_int(blob, node, + "samsung,logo-width", 0); + priv->logo_height = fdtdec_get_int(blob, node, + "samsung,logo-height", 0); + priv->logo_addr = fdtdec_get_int(blob, node, + "samsung,logo-addr", 0); + } + + priv->rgb_mode = fdtdec_get_int(blob, node, + "samsung,rgb-mode", 0); + priv->pclk_name = fdtdec_get_int(blob, node, + "samsung,pclk-name", 0); + priv->sclk_div = fdtdec_get_int(blob, node, + "samsung,sclk-div", 0); + priv->dual_lcd_enabled = fdtdec_get_int(blob, node, + "samsung,dual-lcd-enabled", 0); + + return 0; +} + +static int exynos_fb_probe(struct udevice *dev) +{ + struct video_priv *uc_priv = dev_get_uclass_priv(dev); + struct exynos_fb_priv *priv = dev_get_priv(dev); + struct udevice *panel, *bridge; + struct udevice *dp; + int ret; + + debug("%s: start\n", __func__); + set_system_display_ctrl(); + set_lcd_clk(); + +#ifdef CONFIG_EXYNOS_MIPI_DSIM + exynos_init_dsim_platform_data(&panel_info); +#endif + exynos_fimd_lcd_init(dev); + + ret = uclass_first_device(UCLASS_PANEL, &panel); + if (ret) { + printf("LCD panel failed to probe\n"); + return ret; + } + if (!panel) { + printf("LCD panel not found\n"); + return -ENODEV; + } + + ret = uclass_first_device(UCLASS_DISPLAY, &dp); + if (ret) { + debug("%s: Display device error %d\n", __func__, ret); + return ret; + } + if (!dev) { + debug("%s: Display device missing\n", __func__); + return -ENODEV; + } + ret = display_enable(dp, 18, NULL); + if (ret) { + debug("%s: Display enable error %d\n", __func__, ret); + return ret; + } + + /* backlight / pwm */ + ret = panel_enable_backlight(panel); + if (ret) { + debug("%s: backlight error: %d\n", __func__, ret); + return ret; + } + + ret = uclass_get_device(UCLASS_VIDEO_BRIDGE, 0, &bridge); + if (!ret) + ret = video_bridge_set_backlight(bridge, 80); + if (ret) { + debug("%s: No video bridge, or no backlight on bridge\n", + __func__); + exynos_pinmux_config(PERIPH_ID_PWM0, 0); + } + + uc_priv->xsize = priv->vl_col; + uc_priv->ysize = priv->vl_row; + uc_priv->bpix = priv->vl_bpix; + + /* Enable flushing after LCD writes if requested */ + video_set_flush_dcache(dev, true); + + return 0; +} + +static int exynos_fb_bind(struct udevice *dev) +{ + struct video_uc_platdata *plat = dev_get_uclass_platdata(dev); + + /* This is the maximum panel size we expect to see */ + plat->size = 1920 * 1080 * 2; + + return 0; +} + +static const struct video_ops exynos_fb_ops = { +}; + +static const struct udevice_id exynos_fb_ids[] = { + { .compatible = "samsung,exynos-fimd" }, + { } +}; + +U_BOOT_DRIVER(exynos_fb) = { + .name = "exynos_fb", + .id = UCLASS_VIDEO, + .of_match = exynos_fb_ids, + .ops = &exynos_fb_ops, + .bind = exynos_fb_bind, + .probe = exynos_fb_probe, + .ofdata_to_platdata = exynos_fb_ofdata_to_platdata, + .priv_auto_alloc_size = sizeof(struct exynos_fb_priv), +}; |
