summaryrefslogtreecommitdiffstats
path: root/doc
diff options
context:
space:
mode:
Diffstat (limited to 'doc')
-rw-r--r--doc/README.x8681
1 files changed, 81 insertions, 0 deletions
diff --git a/doc/README.x86 b/doc/README.x86
index 5b51559f41..c5c3010ee2 100644
--- a/doc/README.x86
+++ b/doc/README.x86
@@ -105,6 +105,87 @@ $ make all
---
+Chromebook Samus (2015 Pixel) instructions for bare mode:
+
+First, you need the following binary blobs:
+
+* descriptor.bin - Intel flash descriptor
+* me.bin - Intel Management Engine
+* mrc.bin - Memory Reference Code, which sets up SDRAM
+* refcode.elf - Additional Reference code
+* vga.bin - video ROM, which sets up the display
+
+If you have a samus you can obtain them from your flash, for example, in
+developer mode on the Chromebook (use Ctrl-Alt-F2 to obtain a terminal and
+log in as 'root'):
+
+ cd /tmp
+ flashrom -w samus.bin
+ scp samus.bin username@ip_address:/path/to/somewhere
+
+If not see the coreboot tree [4] where you can use:
+
+ bash crosfirmware.sh samus
+
+to get the image. There is also an 'extract_blobs.sh' scripts that you can use
+on the 'coreboot-Google_Samus.*' file to short-circuit some of the below.
+
+Then 'ifdtool -x samus.bin' on your development machine will produce:
+
+ flashregion_0_flashdescriptor.bin
+ flashregion_1_bios.bin
+ flashregion_2_intel_me.bin
+
+Rename flashregion_0_flashdescriptor.bin to descriptor.bin
+Rename flashregion_2_intel_me.bin to me.bin
+You can ignore flashregion_1_bios.bin - it is not used.
+
+To get the rest, use 'cbfstool samus.bin print':
+
+samus.bin: 8192 kB, bootblocksize 2864, romsize 8388608, offset 0x700000
+alignment: 64 bytes, architecture: x86
+
+Name Offset Type Size
+cmos_layout.bin 0x700000 cmos_layout 1164
+pci8086,0406.rom 0x7004c0 optionrom 65536
+spd.bin 0x710500 (unknown) 4096
+cpu_microcode_blob.bin 0x711540 microcode 70720
+fallback/romstage 0x722a00 stage 54210
+fallback/ramstage 0x72fe00 stage 96382
+config 0x7476c0 raw 6075
+fallback/vboot 0x748ec0 stage 15980
+fallback/refcode 0x74cd80 stage 75578
+fallback/payload 0x75f500 payload 62878
+u-boot.dtb 0x76eb00 (unknown) 5318
+(empty) 0x770000 null 196504
+mrc.bin 0x79ffc0 (unknown) 222876
+(empty) 0x7d66c0 null 167320
+
+You can extract what you need:
+
+ cbfstool samus.bin extract -n pci8086,0406.rom -f vga.bin
+ cbfstool samus.bin extract -n fallback/refcode -f refcode.rmod
+ cbfstool samus.bin extract -n mrc.bin -f mrc.bin
+ cbfstool samus.bin extract -n fallback/refcode -f refcode.bin -U
+
+Note that the -U flag is only supported by the latest cbfstool. It unpacks
+and decompresses the stage to produce a coreboot rmodule. This is a simple
+representation of an ELF file. You need the patch "Support decoding a stage
+with compression".
+
+Put all 5 files into board/google/chromebook_samus.
+
+Now you can build U-Boot and obtain u-boot.rom:
+
+$ make chromebook_link_defconfig
+$ make all
+
+If you are using em100, then this command will flash write -Boot:
+
+ em100 -s -d filename.rom -c W25Q64CV -r
+
+---
+
Intel Crown Bay specific instructions for bare mode:
U-Boot support of Intel Crown Bay board [4] relies on a binary blob called
OpenPOWER on IntegriCloud