diff options
Diffstat (limited to 'board/bf537-stamp/stm_m25p64.c')
| -rw-r--r-- | board/bf537-stamp/stm_m25p64.c | 43 |
1 files changed, 22 insertions, 21 deletions
diff --git a/board/bf537-stamp/stm_m25p64.c b/board/bf537-stamp/stm_m25p64.c index d9c08ee8e6..c48c3c7c7e 100644 --- a/board/bf537-stamp/stm_m25p64.c +++ b/board/bf537-stamp/stm_m25p64.c @@ -4,6 +4,7 @@ #include <common.h> #include <linux/ctype.h> #include <asm/io.h> +#include <asm/mach-common/bits/spi.h> #if defined(CONFIG_SPI) @@ -142,7 +143,7 @@ void SendSingleCommand(const int iCommand) /* sends the actual command to the SPI TX register */ *pSPI_TDBR = iCommand; - sync(); + SSYNC(); /* The SPI status register will be polled to check the SPIF bit */ Wait_For_SPIF(); @@ -164,10 +165,10 @@ void SetupSPI(const int spi_setting) *pSPI_FLG = 0xFF02; *pSPI_BAUD = CONFIG_SPI_BAUD; *pSPI_CTL = spi_setting; - sync(); + SSYNC(); *pSPI_FLG = 0xFD02; - sync(); + SSYNC(); } void SPI_OFF(void) @@ -176,7 +177,7 @@ void SPI_OFF(void) *pSPI_CTL = 0x0400; /* disable SPI */ *pSPI_FLG = 0; *pSPI_BAUD = 0; - sync(); + SSYNC(); udelay(CONFIG_CCLK_HZ / 50000000); } @@ -234,10 +235,10 @@ char ReadStatusRegister(void) SetupSPI((COMMON_SPI_SETTINGS | TIMOD01)); /* Turn on the SPI */ *pSPI_TDBR = SPI_RDSR; /* send instruction to read status register */ - sync(); + SSYNC(); Wait_For_SPIF(); /*wait until the instruction has been sent */ *pSPI_TDBR = 0; /*send dummy to receive the status register */ - sync(); + SSYNC(); Wait_For_SPIF(); /*wait until the data has been sent */ status_register = *pSPI_RDBR; /*read the status register */ @@ -300,23 +301,23 @@ ERROR_CODE EraseBlock(int nBlock) * to point to the start of a sector */ *pSPI_TDBR = SPI_SE; - sync(); + SSYNC(); Wait_For_SPIF(); /* Send the highest byte of the 24 bit address at first */ ShiftValue = (ulSectorOff >> 16); *pSPI_TDBR = ShiftValue; - sync(); + SSYNC(); /* Wait until the instruction has been sent */ Wait_For_SPIF(); /* Send the middle byte of the 24 bit address at second */ ShiftValue = (ulSectorOff >> 8); *pSPI_TDBR = ShiftValue; - sync(); + SSYNC(); /* Wait until the instruction has been sent */ Wait_For_SPIF(); /* Send the lowest byte of the 24 bit address finally */ *pSPI_TDBR = ulSectorOff; - sync(); + SSYNC(); /* Wait until the instruction has been sent */ Wait_For_SPIF(); @@ -357,33 +358,33 @@ ERROR_CODE ReadData(unsigned long ulStart, long lCount, int *pnData) /* Send the read command to SPI device */ *pSPI_TDBR = SPI_READ; #endif - sync(); + SSYNC(); /* Wait until the instruction has been sent */ Wait_For_SPIF(); /* Send the highest byte of the 24 bit address at first */ ShiftValue = (ulStart >> 16); /* Send the byte to the SPI device */ *pSPI_TDBR = ShiftValue; - sync(); + SSYNC(); /* Wait until the instruction has been sent */ Wait_For_SPIF(); /* Send the middle byte of the 24 bit address at second */ ShiftValue = (ulStart >> 8); /* Send the byte to the SPI device */ *pSPI_TDBR = ShiftValue; - sync(); + SSYNC(); /* Wait until the instruction has been sent */ Wait_For_SPIF(); /* Send the lowest byte of the 24 bit address finally */ *pSPI_TDBR = ulStart; - sync(); + SSYNC(); /* Wait until the instruction has been sent */ Wait_For_SPIF(); #ifdef CONFIG_SPI_FLASH_FAST_READ /* Send dummy for FAST_READ */ *pSPI_TDBR = 0; - sync(); + SSYNC(); /* Wait until the instruction has been sent */ Wait_For_SPIF(); #endif @@ -392,7 +393,7 @@ ERROR_CODE ReadData(unsigned long ulStart, long lCount, int *pnData) /* received on the MISO pin. */ for (i = 0; i < lCount; i++) { *pSPI_TDBR = 0; - sync(); + SSYNC(); while (!(*pSPI_STAT & RXS)) ; *cnData++ = *pSPI_RDBR; @@ -435,22 +436,22 @@ ERROR_CODE WriteFlash(unsigned long ulStartAddr, long lTransferCount, */ SetupSPI((COMMON_SPI_SETTINGS | TIMOD01)); *pSPI_TDBR = SPI_PP; - sync(); + SSYNC(); /*wait until the instruction has been sent */ Wait_For_SPIF(); ulWAddr = (ulStartAddr >> 16); *pSPI_TDBR = ulWAddr; - sync(); + SSYNC(); /*wait until the instruction has been sent */ Wait_For_SPIF(); ulWAddr = (ulStartAddr >> 8); *pSPI_TDBR = ulWAddr; - sync(); + SSYNC(); /*wait until the instruction has been sent */ Wait_For_SPIF(); ulWAddr = ulStartAddr; *pSPI_TDBR = ulWAddr; - sync(); + SSYNC(); /*wait until the instruction has been sent */ Wait_For_SPIF(); /* @@ -460,7 +461,7 @@ ERROR_CODE WriteFlash(unsigned long ulStartAddr, long lTransferCount, for (i = 0; (i < lTransferCount) && (i < 256); i++, lWTransferCount++) { iData = *temp; *pSPI_TDBR = iData; - sync(); + SSYNC(); /*wait until the instruction has been sent */ Wait_For_SPIF(); temp++; |
