1 files changed, 0 insertions, 102 deletions
diff --git a/board/Marvell/common/ns16550.h b/board/Marvell/common/ns16550.h
deleted file mode 100644
index 9306381353..0000000000
--- a/board/Marvell/common/ns16550.h
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- * NS16550 Serial Port
- * originally from linux source (arch/powerpc/boot/ns16550.h)
- * modified slightly to
- * have addresses as offsets from CONFIG_SYS_ISA_BASE
- * added a few more definitions
- * added prototypes for ns16550.c
- * reduced no of com ports to 2
- * modifications (c) Rob Taylor, Flying Pig Systems. 2000.
- *
- * further modified to support the DUART in the Galileo eval board
- * modifications (c) Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
- */
-
-#ifndef __NS16550_H__
-#define __NS16550_H__
-
-/* the padding is necessary because on the galileo board the UART is
-   wired in with the 3 address lines shifted over by 2 bits */
-struct NS16550
-{
-	unsigned char rbr;  /* 0 = 0-3*/
-	int pad1:24;
-
-	unsigned char ier;  /* 1 = 4-7*/
-	int pad2:24;
-
-	unsigned char fcr;  /* 2 = 8-b*/
-	int pad3:24;
-
-	unsigned char lcr;  /* 3 = c-f*/
-	int pad4:24;
-
-	unsigned char mcr;  /* 4 = 10-13*/
-	int pad5:24;
-
-	unsigned char lsr;  /* 5 = 14-17*/
-	int pad6:24;
-
-	unsigned char msr;  /* 6 =18-1b*/
-	int pad7:24;
-
-	unsigned char scr;  /* 7 =1c-1f*/
-	int pad8:24;
-} __attribute__ ((packed));
-
-/* aliases */
-#define thr rbr
-#define iir fcr
-#define dll rbr
-#define dlm ier
-
-#define FCR_FIFO_EN     0x01    /*fifo enable*/
-#define FCR_RXSR        0x02    /*receiver soft reset*/
-#define FCR_TXSR        0x04    /*transmitter soft reset*/
-
-
-#define MCR_DTR         0x01
-#define MCR_RTS         0x02
-#define MCR_DMA_EN      0x04
-#define MCR_TX_DFR      0x08
-
-
-#define LCR_WLS_MSK 0x03    /* character length slect mask*/
-#define LCR_WLS_5   0x00    /* 5 bit character length */
-#define LCR_WLS_6   0x01    /* 6 bit character length */
-#define LCR_WLS_7   0x02    /* 7 bit character length */
-#define LCR_WLS_8   0x03    /* 8 bit character length */
-#define LCR_STB     0x04    /* Number of stop Bits, off = 1, on = 1.5 or 2) */
-#define LCR_PEN     0x08    /* Parity eneble*/
-#define LCR_EPS     0x10    /* Even Parity Select*/
-#define LCR_STKP    0x20    /* Stick Parity*/
-#define LCR_SBRK    0x40    /* Set Break*/
-#define LCR_BKSE    0x80    /* Bank select enable*/
-
-#define LSR_DR      0x01    /* Data ready */
-#define LSR_OE      0x02    /* Overrun */
-#define LSR_PE      0x04    /* Parity error */
-#define LSR_FE      0x08    /* Framing error */
-#define LSR_BI      0x10    /* Break */
-#define LSR_THRE    0x20    /* Xmit holding register empty */
-#define LSR_TEMT    0x40    /* Xmitter empty */
-#define LSR_ERR     0x80    /* Error */
-
-/* useful defaults for LCR*/
-#define LCR_8N1     0x03
-
-
-#define COM1 0x03F8
-#define COM2 0x02F8
-
-volatile struct NS16550 * NS16550_init(int chan, int baud_divisor);
-void NS16550_putc(volatile struct NS16550 *com_port, unsigned char c);
-unsigned char NS16550_getc(volatile struct NS16550 *com_port);
-int NS16550_tstc(volatile struct NS16550 *com_port);
-void NS16550_reinit(volatile struct NS16550 *com_port, int baud_divisor);
-
-typedef struct NS16550 *NS16550_t;
-
-extern const NS16550_t COM_PORTS[];
-
-#endif