1 files changed, 0 insertions, 94 deletions
diff --git a/board/Marvell/common/bootseq.txt b/board/Marvell/common/bootseq.txt
deleted file mode 100644
index 6cae9ea074..0000000000
--- a/board/Marvell/common/bootseq.txt
+++ /dev/null
@@ -1,94 +0,0 @@
-(cpu/mpc7xxx/start.S)
-
-start:
-    b boot_cold
-
-start_warm:
-    b boot_warm
-
-
-boot_cold:
-boot_warm:
-    clear bats
-    init l2 (if enabled)
-    init altivec (if enabled)
-    invalidate l2 (if enabled)
-    setup bats (from defines in config_EVB)
-    enable_addr_trans: (if MMU enabled)
-	enable MSR_IR and MSR_DR
-    jump to in_flash
-
-in_flash:
-    enable l1 dcache
-    gal_low_init: (board/evb64260/sdram_init.S)
-	config SDRAM (CFG, TIMING, DECODE)
-	init scratch regs (810 + 814)
-
-	detect DIMM0 (bank 0 only)
-	config SDRAM_PARA0 to 256/512Mbit
-	bl sdram_op_mode
-	detect bank0 width
-	    write scratch reg 810
-	config SDRAM_PARA0 with results
-	config SDRAM_PARA1 with results
-
-	detect DIMM1 (bank 2 only)
-	config SDRAM_PARA2 to 256/512Mbit
-	detect bank2 width
-	    write scratch reg 814
-	config SDRAM_PARA2 with results
-	config SDRAM_PARA3 with results
-
-	setup device bus timings/width
-	setup boot device timings/width
-
-	setup CPU_CONF (0x0)
-	setup cpu master control register 0x160
-	setup PCI0 TIMEOUT
-	setup PCI1 TIMEOUT
-	setup PCI0 BAR
-	setup PCI1 BAR
-
-	setup MPP control 0-3
-	setup GPP level control
-	setup Serial ports multiplex
-
-    setup stack pointer (r1)
-    setup GOT
-    call cpu_init_f
-	debug leds
-    board_init_f: (common/board.c)
-	board_early_init_f:
-	    remap gt regs?
-	    map PCI mem/io
-	    map device space
-	    clear out interrupts
-	init_timebase
-	env_init
-	serial_init
-	console_init_f
-	display_options
-	initdram: (board/evb64260/evb64260.c)
-	    detect memory
-	    for each bank:
-		dram_size()
-		setup PCI slave memory mappings
-		setup SCS
-	setup monitor
-	alloc board info struct
-	init bd struct
-	relocate_code: (cpu/mpc7xxx/start.S)
-	    copy,got,clearbss
-	    board_init_r(bd, dest_addr) (common/board.c)
-		setup bd function pointers
-		trap_init
-		flash_init: (board/evb64260/flash.c)
-		setup bd flash info
-		cpu_init_r: (cpu/mpc7xxx/cpu_init.c)
-		    nothing
-		mem_malloc_init
-		malloc_bin_reloc
-		spi_init (r or f)??? (CONFIG_ENV_IS_IN_EEPROM)
-		env_relocated
-		misc_init_r(bd): (board/evb64260/evb64260.c)
-		    mpsc_init2