diff options
Diffstat (limited to 'arch/arm/cpu/arm720t')
| -rw-r--r-- | arch/arm/cpu/arm720t/tegra-common/Makefile | 1 | ||||
| -rw-r--r-- | arch/arm/cpu/arm720t/tegra-common/cpu.c | 333 | ||||
| -rw-r--r-- | arch/arm/cpu/arm720t/tegra-common/cpu.h | 70 | ||||
| -rw-r--r-- | arch/arm/cpu/arm720t/tegra-common/spl.c | 3 | ||||
| -rw-r--r-- | arch/arm/cpu/arm720t/tegra114/Makefile | 42 | ||||
| -rw-r--r-- | arch/arm/cpu/arm720t/tegra114/config.mk | 19 | ||||
| -rw-r--r-- | arch/arm/cpu/arm720t/tegra114/cpu.c | 297 | ||||
| -rw-r--r-- | arch/arm/cpu/arm720t/tegra20/cpu.c | 216 | ||||
| -rw-r--r-- | arch/arm/cpu/arm720t/tegra30/Makefile | 41 | ||||
| -rw-r--r-- | arch/arm/cpu/arm720t/tegra30/config.mk | 19 | ||||
| -rw-r--r-- | arch/arm/cpu/arm720t/tegra30/cpu.c | 176 |
11 files changed, 970 insertions, 247 deletions
diff --git a/arch/arm/cpu/arm720t/tegra-common/Makefile b/arch/arm/cpu/arm720t/tegra-common/Makefile index febd2e301f..6cbc6adaa1 100644 --- a/arch/arm/cpu/arm720t/tegra-common/Makefile +++ b/arch/arm/cpu/arm720t/tegra-common/Makefile @@ -28,6 +28,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)libtegra-common.o COBJS-$(CONFIG_SPL_BUILD) += spl.o +COBJS-y += cpu.o SRCS := $(COBJS-y:.o=.c) OBJS := $(addprefix $(obj),$(COBJS-y)) diff --git a/arch/arm/cpu/arm720t/tegra-common/cpu.c b/arch/arm/cpu/arm720t/tegra-common/cpu.c new file mode 100644 index 0000000000..119342e957 --- /dev/null +++ b/arch/arm/cpu/arm720t/tegra-common/cpu.c @@ -0,0 +1,333 @@ +/* + * Copyright (c) 2010-2012, NVIDIA CORPORATION. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/clock.h> +#include <asm/arch/gp_padctrl.h> +#include <asm/arch/pinmux.h> +#include <asm/arch/tegra.h> +#include <asm/arch-tegra/clk_rst.h> +#include <asm/arch-tegra/pmc.h> +#include <asm/arch-tegra/scu.h> +#include "cpu.h" + +int get_num_cpus(void) +{ + struct apb_misc_gp_ctlr *gp; + uint rev; + + gp = (struct apb_misc_gp_ctlr *)NV_PA_APB_MISC_GP_BASE; + rev = (readl(&gp->hidrev) & HIDREV_CHIPID_MASK) >> HIDREV_CHIPID_SHIFT; + + switch (rev) { + case CHIPID_TEGRA20: + return 2; + break; + case CHIPID_TEGRA30: + case CHIPID_TEGRA114: + default: + return 4; + break; + } +} + +/* + * Timing tables for each SOC for all four oscillator options. + */ +struct clk_pll_table tegra_pll_x_table[TEGRA_SOC_CNT][CLOCK_OSC_FREQ_COUNT] = { + /* T20: 1 GHz */ + /* n, m, p, cpcon */ + {{ 1000, 13, 0, 12}, /* OSC 13M */ + { 625, 12, 0, 8}, /* OSC 19.2M */ + { 1000, 12, 0, 12}, /* OSC 12M */ + { 1000, 26, 0, 12}, /* OSC 26M */ + }, + + /* T25: 1.2 GHz */ + {{ 923, 10, 0, 12}, + { 750, 12, 0, 8}, + { 600, 6, 0, 12}, + { 600, 13, 0, 12}, + }, + + /* T30: 1.4 GHz */ + {{ 862, 8, 0, 8}, + { 583, 8, 0, 4}, + { 700, 6, 0, 8}, + { 700, 13, 0, 8}, + }, + + /* T114: 1.4 GHz */ + {{ 862, 8, 0, 8}, + { 583, 8, 0, 4}, + { 696, 12, 0, 8}, + { 700, 13, 0, 8}, + }, +}; + +void adjust_pllp_out_freqs(void) +{ + struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; + struct clk_pll *pll = &clkrst->crc_pll[CLOCK_ID_PERIPH]; + u32 reg; + + /* Set T30 PLLP_OUT1, 2, 3 & 4 freqs to 9.6, 48, 102 & 204MHz */ + reg = readl(&pll->pll_out[0]); /* OUTA, contains OUT2 / OUT1 */ + reg |= (IN_408_OUT_48_DIVISOR << PLLP_OUT2_RATIO) | PLLP_OUT2_OVR + | (IN_408_OUT_9_6_DIVISOR << PLLP_OUT1_RATIO) | PLLP_OUT1_OVR; + writel(reg, &pll->pll_out[0]); + + reg = readl(&pll->pll_out[1]); /* OUTB, contains OUT4 / OUT3 */ + reg |= (IN_408_OUT_204_DIVISOR << PLLP_OUT4_RATIO) | PLLP_OUT4_OVR + | (IN_408_OUT_102_DIVISOR << PLLP_OUT3_RATIO) | PLLP_OUT3_OVR; + writel(reg, &pll->pll_out[1]); +} + +int pllx_set_rate(struct clk_pll_simple *pll , u32 divn, u32 divm, + u32 divp, u32 cpcon) +{ + u32 reg; + + /* If PLLX is already enabled, just return */ + if (readl(&pll->pll_base) & PLL_ENABLE_MASK) { + debug("pllx_set_rate: PLLX already enabled, returning\n"); + return 0; + } + + debug(" pllx_set_rate entry\n"); + + /* Set BYPASS, m, n and p to PLLX_BASE */ + reg = PLL_BYPASS_MASK | (divm << PLL_DIVM_SHIFT); + reg |= ((divn << PLL_DIVN_SHIFT) | (divp << PLL_DIVP_SHIFT)); + writel(reg, &pll->pll_base); + + /* Set cpcon to PLLX_MISC */ + reg = (cpcon << PLL_CPCON_SHIFT); + + /* Set dccon to PLLX_MISC if freq > 600MHz */ + if (divn > 600) + reg |= (1 << PLL_DCCON_SHIFT); + writel(reg, &pll->pll_misc); + + /* Enable PLLX */ + reg = readl(&pll->pll_base); + reg |= PLL_ENABLE_MASK; + + /* Disable BYPASS */ + reg &= ~PLL_BYPASS_MASK; + writel(reg, &pll->pll_base); + + /* Set lock_enable to PLLX_MISC */ + reg = readl(&pll->pll_misc); + reg |= PLL_LOCK_ENABLE_MASK; + writel(reg, &pll->pll_misc); + + return 0; +} + +void init_pllx(void) +{ + struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; + struct clk_pll_simple *pll = &clkrst->crc_pll_simple[SIMPLE_PLLX]; + int chip_type; + enum clock_osc_freq osc; + struct clk_pll_table *sel; + + debug("init_pllx entry\n"); + + /* get chip type */ + chip_type = tegra_get_chip_type(); + debug(" init_pllx: chip_type = %d\n", chip_type); + + /* get osc freq */ + osc = clock_get_osc_freq(); + debug(" init_pllx: osc = %d\n", osc); + + /* set pllx */ + sel = &tegra_pll_x_table[chip_type][osc]; + pllx_set_rate(pll, sel->n, sel->m, sel->p, sel->cpcon); + + /* adjust PLLP_out1-4 on T30/T114 */ + if (chip_type == TEGRA_SOC_T30 || chip_type == TEGRA_SOC_T114) { + debug(" init_pllx: adjusting PLLP out freqs\n"); + adjust_pllp_out_freqs(); + } +} + +void enable_cpu_clock(int enable) +{ + struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; + u32 clk; + + /* + * NOTE: + * Regardless of whether the request is to enable or disable the CPU + * clock, every processor in the CPU complex except the master (CPU 0) + * will have it's clock stopped because the AVP only talks to the + * master. + */ + + if (enable) { + /* Initialize PLLX */ + init_pllx(); + + /* Wait until all clocks are stable */ + udelay(PLL_STABILIZATION_DELAY); + + writel(CCLK_BURST_POLICY, &clkrst->crc_cclk_brst_pol); + writel(SUPER_CCLK_DIVIDER, &clkrst->crc_super_cclk_div); + } + + /* + * Read the register containing the individual CPU clock enables and + * always stop the clocks to CPUs > 0. + */ + clk = readl(&clkrst->crc_clk_cpu_cmplx); + clk |= 1 << CPU1_CLK_STP_SHIFT; + if (get_num_cpus() == 4) + clk |= (1 << CPU2_CLK_STP_SHIFT) + (1 << CPU3_CLK_STP_SHIFT); + + /* Stop/Unstop the CPU clock */ + clk &= ~CPU0_CLK_STP_MASK; + clk |= !enable << CPU0_CLK_STP_SHIFT; + writel(clk, &clkrst->crc_clk_cpu_cmplx); + + clock_enable(PERIPH_ID_CPU); +} + +static int is_cpu_powered(void) +{ + struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE; + + return (readl(&pmc->pmc_pwrgate_status) & CPU_PWRED) ? 1 : 0; +} + +static void remove_cpu_io_clamps(void) +{ + struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE; + u32 reg; + + /* Remove the clamps on the CPU I/O signals */ + reg = readl(&pmc->pmc_remove_clamping); + reg |= CPU_CLMP; + writel(reg, &pmc->pmc_remove_clamping); + + /* Give I/O signals time to stabilize */ + udelay(IO_STABILIZATION_DELAY); +} + +void powerup_cpu(void) +{ + struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE; + u32 reg; + int timeout = IO_STABILIZATION_DELAY; + + if (!is_cpu_powered()) { + /* Toggle the CPU power state (OFF -> ON) */ + reg = readl(&pmc->pmc_pwrgate_toggle); + reg &= PARTID_CP; + reg |= START_CP; + writel(reg, &pmc->pmc_pwrgate_toggle); + + /* Wait for the power to come up */ + while (!is_cpu_powered()) { + if (timeout-- == 0) + printf("CPU failed to power up!\n"); + else + udelay(10); + } + + /* + * Remove the I/O clamps from CPU power partition. + * Recommended only on a Warm boot, if the CPU partition gets + * power gated. Shouldn't cause any harm when called after a + * cold boot according to HW, probably just redundant. + */ + remove_cpu_io_clamps(); + } +} + +void reset_A9_cpu(int reset) +{ + /* + * NOTE: Regardless of whether the request is to hold the CPU in reset + * or take it out of reset, every processor in the CPU complex + * except the master (CPU 0) will be held in reset because the + * AVP only talks to the master. The AVP does not know that there + * are multiple processors in the CPU complex. + */ + int mask = crc_rst_cpu | crc_rst_de | crc_rst_debug; + int num_cpus = get_num_cpus(); + int cpu; + + debug("reset_a9_cpu entry\n"); + /* Hold CPUs 1 onwards in reset, and CPU 0 if asked */ + for (cpu = 1; cpu < num_cpus; cpu++) + reset_cmplx_set_enable(cpu, mask, 1); + reset_cmplx_set_enable(0, mask, reset); + + /* Enable/Disable master CPU reset */ + reset_set_enable(PERIPH_ID_CPU, reset); +} + +void clock_enable_coresight(int enable) +{ + u32 rst, src = 2; + int chip; + + debug("clock_enable_coresight entry\n"); + clock_set_enable(PERIPH_ID_CORESIGHT, enable); + reset_set_enable(PERIPH_ID_CORESIGHT, !enable); + + if (enable) { + /* + * Put CoreSight on PLLP_OUT0 (216 MHz) and divide it down by + * 1.5, giving an effective frequency of 144MHz. + * Set PLLP_OUT0 [bits31:30 = 00], and use a 7.1 divisor + * (bits 7:0), so 00000001b == 1.5 (n+1 + .5) + * + * Clock divider request for 204MHz would setup CSITE clock as + * 144MHz for PLLP base 216MHz and 204MHz for PLLP base 408MHz + */ + chip = tegra_get_chip_type(); + if (chip == TEGRA_SOC_T30 || chip == TEGRA_SOC_T114) + src = CLK_DIVIDER(NVBL_PLLP_KHZ, 204000); + else if (chip == TEGRA_SOC_T20 || chip == TEGRA_SOC_T25) + src = CLK_DIVIDER(NVBL_PLLP_KHZ, 144000); + else + printf("%s: Unknown chip type %X!\n", __func__, chip); + clock_ll_set_source_divisor(PERIPH_ID_CSI, 0, src); + + /* Unlock the CPU CoreSight interfaces */ + rst = CORESIGHT_UNLOCK; + writel(rst, CSITE_CPU_DBG0_LAR); + writel(rst, CSITE_CPU_DBG1_LAR); + if (get_num_cpus() == 4) { + writel(rst, CSITE_CPU_DBG2_LAR); + writel(rst, CSITE_CPU_DBG3_LAR); + } + } +} + +void halt_avp(void) +{ + for (;;) { + writel((HALT_COP_EVENT_JTAG | HALT_COP_EVENT_IRQ_1 \ + | HALT_COP_EVENT_FIQ_1 | (FLOW_MODE_STOP<<29)), + FLOW_CTLR_HALT_COP_EVENTS); + } +} diff --git a/arch/arm/cpu/arm720t/tegra-common/cpu.h b/arch/arm/cpu/arm720t/tegra-common/cpu.h index 6804cd7a3d..e8e05d77aa 100644 --- a/arch/arm/cpu/arm720t/tegra-common/cpu.h +++ b/arch/arm/cpu/arm720t/tegra-common/cpu.h @@ -26,7 +26,13 @@ #define PLL_STABILIZATION_DELAY (300) #define IO_STABILIZATION_DELAY (1000) +#if defined(CONFIG_TEGRA20) #define NVBL_PLLP_KHZ (216000) +#elif defined(CONFIG_TEGRA30) || defined(CONFIG_TEGRA114) +#define NVBL_PLLP_KHZ (408000) +#else +#error "Unknown Tegra chip!" +#endif #define PLLX_ENABLED (1 << 30) #define CCLK_BURST_POLICY 0x20008888 @@ -44,50 +50,11 @@ #define CORESIGHT_UNLOCK 0xC5ACCE55; -/* AP20-Specific Base Addresses */ - -/* AP20 Base physical address of SDRAM. */ -#define AP20_BASE_PA_SDRAM 0x00000000 -/* AP20 Base physical address of internal SRAM. */ -#define AP20_BASE_PA_SRAM 0x40000000 -/* AP20 Size of internal SRAM (256KB). */ -#define AP20_BASE_PA_SRAM_SIZE 0x00040000 -/* AP20 Base physical address of flash. */ -#define AP20_BASE_PA_NOR_FLASH 0xD0000000 -/* AP20 Base physical address of boot information table. */ -#define AP20_BASE_PA_BOOT_INFO AP20_BASE_PA_SRAM - -/* - * Super-temporary stacks for EXTREMELY early startup. The values chosen for - * these addresses must be valid on ALL SOCs because this value is used before - * we are able to differentiate between the SOC types. - * - * NOTE: The since CPU's stack will eventually be moved from IRAM to SDRAM, its - * stack is placed below the AVP stack. Once the CPU stack has been moved, - * the AVP is free to use the IRAM the CPU stack previously occupied if - * it should need to do so. - * - * NOTE: In multi-processor CPU complex configurations, each processor will have - * its own stack of size CPU_EARLY_BOOT_STACK_SIZE. CPU 0 will have a - * limit of CPU_EARLY_BOOT_STACK_LIMIT. Each successive CPU will have a - * stack limit that is CPU_EARLY_BOOT_STACK_SIZE less then the previous - * CPU. - */ - -/* Common AVP early boot stack limit */ -#define AVP_EARLY_BOOT_STACK_LIMIT \ - (AP20_BASE_PA_SRAM + (AP20_BASE_PA_SRAM_SIZE/2)) -/* Common AVP early boot stack size */ -#define AVP_EARLY_BOOT_STACK_SIZE 0x1000 -/* Common CPU early boot stack limit */ -#define CPU_EARLY_BOOT_STACK_LIMIT \ - (AVP_EARLY_BOOT_STACK_LIMIT - AVP_EARLY_BOOT_STACK_SIZE) -/* Common CPU early boot stack size */ -#define CPU_EARLY_BOOT_STACK_SIZE 0x1000 - #define EXCEP_VECTOR_CPU_RESET_VECTOR (NV_PA_EVP_BASE + 0x100) #define CSITE_CPU_DBG0_LAR (NV_PA_CSITE_BASE + 0x10FB0) #define CSITE_CPU_DBG1_LAR (NV_PA_CSITE_BASE + 0x12FB0) +#define CSITE_CPU_DBG2_LAR (NV_PA_CSITE_BASE + 0x14FB0) +#define CSITE_CPU_DBG3_LAR (NV_PA_CSITE_BASE + 0x16FB0) #define FLOW_CTLR_HALT_COP_EVENTS (NV_PA_FLOW_BASE + 4) #define FLOW_MODE_STOP 2 @@ -95,6 +62,23 @@ #define HALT_COP_EVENT_IRQ_1 (1 << 11) #define HALT_COP_EVENT_FIQ_1 (1 << 9) -void start_cpu(u32 reset_vector); -int ap20_cpu_is_cortexa9(void); +#define FLOW_MODE_NONE 0 + +#define SIMPLE_PLLX (CLOCK_ID_XCPU - CLOCK_ID_FIRST_SIMPLE) + +struct clk_pll_table { + u16 n; + u16 m; + u8 p; + u8 cpcon; +}; + +void clock_enable_coresight(int enable); +void enable_cpu_clock(int enable); void halt_avp(void) __attribute__ ((noreturn)); +void init_pllx(void); +void powerup_cpu(void); +void reset_A9_cpu(int reset); +void start_cpu(u32 reset_vector); +int tegra_get_chip_type(void); +void adjust_pllp_out_freqs(void); diff --git a/arch/arm/cpu/arm720t/tegra-common/spl.c b/arch/arm/cpu/arm720t/tegra-common/spl.c index c280ab7d0f..a9a1c39c73 100644 --- a/arch/arm/cpu/arm720t/tegra-common/spl.c +++ b/arch/arm/cpu/arm720t/tegra-common/spl.c @@ -23,7 +23,6 @@ * MA 02111-1307 USA */ #include <common.h> -#include "cpu.h" #include <spl.h> #include <asm/io.h> @@ -32,7 +31,7 @@ #include <asm/arch/tegra.h> #include <asm/arch-tegra/board.h> #include <asm/arch/spl.h> - +#include "cpu.h" void spl_board_init(void) { diff --git a/arch/arm/cpu/arm720t/tegra114/Makefile b/arch/arm/cpu/arm720t/tegra114/Makefile new file mode 100644 index 0000000000..6cf7fe9da9 --- /dev/null +++ b/arch/arm/cpu/arm720t/tegra114/Makefile @@ -0,0 +1,42 @@ +# +# Copyright (c) 2010-2013, NVIDIA CORPORATION. All rights reserved. +# +# (C) Copyright 2000-2008 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# This program is free software; you can redistribute it and/or modify it +# under the terms and conditions of the GNU General Public License, +# version 2, as published by the Free Software Foundation. +# +# This program is distributed in the hope it will be useful, but WITHOUT +# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for +# more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(SOC).o + +#COBJS-y += cpu.o t11x.o +COBJS-y += cpu.o + +SRCS := $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS-y)) + +all: $(obj).depend $(LIB) + +$(LIB): $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/arch/arm/cpu/arm720t/tegra114/config.mk b/arch/arm/cpu/arm720t/tegra114/config.mk new file mode 100644 index 0000000000..7947b50fd0 --- /dev/null +++ b/arch/arm/cpu/arm720t/tegra114/config.mk @@ -0,0 +1,19 @@ +# +# Copyright (c) 2010-2013, NVIDIA CORPORATION. All rights reserved. +# +# (C) Copyright 2002 +# Gary Jennejohn, DENX Software Engineering, <garyj@denx.de> +# +# This program is free software; you can redistribute it and/or modify it +# under the terms and conditions of the GNU General Public License, +# version 2, as published by the Free Software Foundation. +# +# This program is distributed in the hope it will be useful, but WITHOUT +# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for +# more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# +USE_PRIVATE_LIBGCC = yes diff --git a/arch/arm/cpu/arm720t/tegra114/cpu.c b/arch/arm/cpu/arm720t/tegra114/cpu.c new file mode 100644 index 0000000000..5962e15b4f --- /dev/null +++ b/arch/arm/cpu/arm720t/tegra114/cpu.c @@ -0,0 +1,297 @@ +/* + * Copyright (c) 2010-2013, NVIDIA CORPORATION. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/clock.h> +#include <asm/arch/flow.h> +#include <asm/arch/pinmux.h> +#include <asm/arch/tegra.h> +#include <asm/arch-tegra/clk_rst.h> +#include <asm/arch-tegra/pmc.h> +#include "../tegra-common/cpu.h" + +/* Tegra114-specific CPU init code */ +static void enable_cpu_power_rail(void) +{ + struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE; + struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; + u32 reg; + + debug("enable_cpu_power_rail entry\n"); + + /* un-tristate PWR_I2C SCL/SDA, rest of the defaults are correct */ + pinmux_tristate_disable(PINGRP_PWR_I2C_SCL); + pinmux_tristate_disable(PINGRP_PWR_I2C_SDA); + + /* + * Set CPUPWRGOOD_TIMER - APB clock is 1/2 of SCLK (102MHz), + * set it for 25ms (102MHz * .025) + */ + reg = 0x26E8F0; + writel(reg, &pmc->pmc_cpupwrgood_timer); + + /* Set polarity to 0 (normal) and enable CPUPWRREQ_OE */ + clrbits_le32(&pmc->pmc_cntrl, CPUPWRREQ_POL); + setbits_le32(&pmc->pmc_cntrl, CPUPWRREQ_OE); + + /* + * Set CLK_RST_CONTROLLER_CPU_SOFTRST_CTRL2_0_CAR2PMC_CPU_ACK_WIDTH + * to 408 to satisfy the requirement of having at least 16 CPU clock + * cycles before clamp removal. + */ + + clrbits_le32(&clkrst->crc_cpu_softrst_ctrl2, 0xFFF); + setbits_le32(&clkrst->crc_cpu_softrst_ctrl2, 408); +} + +static void enable_cpu_clocks(void) +{ + struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; + u32 reg; + + debug("enable_cpu_clocks entry\n"); + + /* Wait for PLL-X to lock */ + do { + reg = readl(&clkrst->crc_pll_simple[SIMPLE_PLLX].pll_base); + } while ((reg & (1 << 27)) == 0); + + /* Wait until all clocks are stable */ + udelay(PLL_STABILIZATION_DELAY); + + writel(CCLK_BURST_POLICY, &clkrst->crc_cclk_brst_pol); + writel(SUPER_CCLK_DIVIDER, &clkrst->crc_super_cclk_div); + + /* Always enable the main CPU complex clocks */ + clock_enable(PERIPH_ID_CPU); + clock_enable(PERIPH_ID_CPULP); + clock_enable(PERIPH_ID_CPUG); +} + +static void remove_cpu_resets(void) +{ + struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; + u32 reg; + + debug("remove_cpu_resets entry\n"); + /* Take the slow non-CPU partition out of reset */ + reg = readl(&clkrst->crc_rst_cpulp_cmplx_clr); + writel((reg | CLR_NONCPURESET), &clkrst->crc_rst_cpulp_cmplx_clr); + + /* Take the fast non-CPU partition out of reset */ + reg = readl(&clkrst->crc_rst_cpug_cmplx_clr); + writel((reg | CLR_NONCPURESET), &clkrst->crc_rst_cpug_cmplx_clr); + + /* Clear the SW-controlled reset of the slow cluster */ + reg = readl(&clkrst->crc_rst_cpulp_cmplx_clr); + reg |= (CLR_CPURESET0+CLR_DBGRESET0+CLR_CORERESET0+CLR_CXRESET0); + writel(reg, &clkrst->crc_rst_cpulp_cmplx_clr); + + /* Clear the SW-controlled reset of the fast cluster */ + reg = readl(&clkrst->crc_rst_cpug_cmplx_clr); + reg |= (CLR_CPURESET0+CLR_DBGRESET0+CLR_CORERESET0+CLR_CXRESET0); + reg |= (CLR_CPURESET1+CLR_DBGRESET1+CLR_CORERESET1+CLR_CXRESET1); + reg |= (CLR_CPURESET2+CLR_DBGRESET2+CLR_CORERESET2+CLR_CXRESET2); + reg |= (CLR_CPURESET3+CLR_DBGRESET3+CLR_CORERESET3+CLR_CXRESET3); + writel(reg, &clkrst->crc_rst_cpug_cmplx_clr); +} + +/** + * The T114 requires some special clock initialization, including setting up + * the DVC I2C, turning on MSELECT and selecting the G CPU cluster + */ +void t114_init_clocks(void) +{ + struct clk_rst_ctlr *clkrst = + (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; + struct flow_ctlr *flow = (struct flow_ctlr *)NV_PA_FLOW_BASE; + u32 val; + + debug("t114_init_clocks entry\n"); + + /* Set active CPU cluster to G */ + clrbits_le32(&flow->cluster_control, 1); + + /* + * Switch system clock to PLLP_OUT4 (108 MHz), AVP will now run + * at 108 MHz. This is glitch free as only the source is changed, no + * special precaution needed. + */ + val = (SCLK_SOURCE_PLLP_OUT4 << SCLK_SWAKEUP_FIQ_SOURCE_SHIFT) | + (SCLK_SOURCE_PLLP_OUT4 << SCLK_SWAKEUP_IRQ_SOURCE_SHIFT) | + (SCLK_SOURCE_PLLP_OUT4 << SCLK_SWAKEUP_RUN_SOURCE_SHIFT) | + (SCLK_SOURCE_PLLP_OUT4 << SCLK_SWAKEUP_IDLE_SOURCE_SHIFT) | + (SCLK_SYS_STATE_RUN << SCLK_SYS_STATE_SHIFT); + writel(val, &clkrst->crc_sclk_brst_pol); + + writel(SUPER_SCLK_ENB_MASK, &clkrst->crc_super_sclk_div); + + debug("Setting up PLLX\n"); + init_pllx(); + + val = (1 << CLK_SYS_RATE_AHB_RATE_SHIFT); + writel(val, &clkrst->crc_clk_sys_rate); + + /* Enable clocks to required peripherals. TBD - minimize this list */ + debug("Enabling clocks\n"); + + clock_set_enable(PERIPH_ID_CACHE2, 1); + clock_set_enable(PERIPH_ID_GPIO, 1); + clock_set_enable(PERIPH_ID_TMR, 1); + clock_set_enable(PERIPH_ID_RTC, 1); + clock_set_enable(PERIPH_ID_CPU, 1); + clock_set_enable(PERIPH_ID_EMC, 1); + clock_set_enable(PERIPH_ID_I2C5, 1); + clock_set_enable(PERIPH_ID_FUSE, 1); + clock_set_enable(PERIPH_ID_PMC, 1); + clock_set_enable(PERIPH_ID_APBDMA, 1); + clock_set_enable(PERIPH_ID_MEM, 1); + clock_set_enable(PERIPH_ID_IRAMA, 1); + clock_set_enable(PERIPH_ID_IRAMB, 1); + clock_set_enable(PERIPH_ID_IRAMC, 1); + clock_set_enable(PERIPH_ID_IRAMD, 1); + clock_set_enable(PERIPH_ID_CORESIGHT, 1); + clock_set_enable(PERIPH_ID_MSELECT, 1); + clock_set_enable(PERIPH_ID_EMC1, 1); + clock_set_enable(PERIPH_ID_MC1, 1); + clock_set_enable(PERIPH_ID_DVFS, 1); + + /* Switch MSELECT clock to PLLP (00) */ + clock_ll_set_source(PERIPH_ID_MSELECT, 0); + + /* + * Clock divider request for 102MHz would setup MSELECT clock as + * 102MHz for PLLP base 408MHz + */ + clock_ll_set_source_divisor(PERIPH_ID_MSELECT, 0, + (NVBL_PLLP_KHZ/102000)); + + /* I2C5 (DVC) gets CLK_M and a divisor of 17 */ + clock_ll_set_source_divisor(PERIPH_ID_I2C5, 3, 16); + + /* Give clocks time to stabilize */ + udelay(1000); + + /* Take required peripherals out of reset */ + debug("Taking periphs out of reset\n"); + reset_set_enable(PERIPH_ID_CACHE2, 0); + reset_set_enable(PERIPH_ID_GPIO, 0); + reset_set_enable(PERIPH_ID_TMR, 0); + reset_set_enable(PERIPH_ID_COP, 0); + reset_set_enable(PERIPH_ID_EMC, 0); + reset_set_enable(PERIPH_ID_I2C5, 0); + reset_set_enable(PERIPH_ID_FUSE, 0); + reset_set_enable(PERIPH_ID_APBDMA, 0); + reset_set_enable(PERIPH_ID_MEM, 0); + reset_set_enable(PERIPH_ID_CORESIGHT, 0); + reset_set_enable(PERIPH_ID_MSELECT, 0); + reset_set_enable(PERIPH_ID_EMC1, 0); + reset_set_enable(PERIPH_ID_MC1, 0); + + debug("t114_init_clocks exit\n"); +} + +static int is_partition_powered(u32 mask) +{ + struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE; + u32 reg; + + /* Get power gate status */ + reg = readl(&pmc->pmc_pwrgate_status); + return (reg & mask) == mask; +} + +static int is_clamp_enabled(u32 mask) +{ + struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE; + u32 reg; + + /* Get clamp status. TODO: Add pmc_clamp_status alias to pmc.h */ + reg = readl(&pmc->pmc_pwrgate_timer_on); + return (reg & mask) == mask; +} + +static void power_partition(u32 status, u32 partid) +{ + struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE; + + debug("%s: status = %08X, part ID = %08X\n", __func__, status, partid); + /* Is the partition already on? */ + if (!is_partition_powered(status)) { + /* No, toggle the partition power state (OFF -> ON) */ + debug("power_partition, toggling state\n"); + clrbits_le32(&pmc->pmc_pwrgate_toggle, 0x1F); + setbits_le32(&pmc->pmc_pwrgate_toggle, partid); + setbits_le32(&pmc->pmc_pwrgate_toggle, START_CP); + + /* Wait for the power to come up */ + while (!is_partition_powered(status)) + ; + + /* Wait for the clamp status to be cleared */ + while (is_clamp_enabled(status)) + ; + + /* Give I/O signals time to stabilize */ + udelay(IO_STABILIZATION_DELAY); + } +} + +void powerup_cpus(void) +{ + debug("powerup_cpus entry\n"); + + /* We boot to the fast cluster */ + debug("powerup_cpus entry: G cluster\n"); + /* Power up the fast cluster rail partition */ + power_partition(CRAIL, CRAILID); + + /* Power up the fast cluster non-CPU partition */ + power_partition(C0NC, C0NCID); + + /* Power up the fast cluster CPU0 partition */ + power_partition(CE0, CE0ID); +} + +void start_cpu(u32 reset_vector) +{ + debug("start_cpu entry, reset_vector = %x\n", reset_vector); + + t114_init_clocks(); + + /* Enable VDD_CPU */ + enable_cpu_power_rail(); + + /* Get the CPU(s) running */ + enable_cpu_clocks(); + + /* Enable CoreSight */ + clock_enable_coresight(1); + + /* Take CPU(s) out of reset */ + remove_cpu_resets(); + + /* + * Set the entry point for CPU execution from reset, + * if it's a non-zero value. + */ + if (reset_vector) + writel(reset_vector, EXCEP_VECTOR_CPU_RESET_VECTOR); + + /* If the CPU(s) don't already have power, power 'em up */ + powerup_cpus(); +} diff --git a/arch/arm/cpu/arm720t/tegra20/cpu.c b/arch/arm/cpu/arm720t/tegra20/cpu.c index ef7f375e79..253389955f 100644 --- a/arch/arm/cpu/arm720t/tegra20/cpu.c +++ b/arch/arm/cpu/arm720t/tegra20/cpu.c @@ -1,160 +1,25 @@ /* -* (C) Copyright 2010-2011 -* NVIDIA Corporation <www.nvidia.com> -* -* See file CREDITS for list of people who contributed to this -* project. -* -* This program is free software; you can redistribute it and/or -* modify it under the terms of the GNU General Public License as -* published by the Free Software Foundation; either version 2 of -* the License, or (at your option) any later version. -* -* This program is distributed in the hope that it will be useful, -* but WITHOUT ANY WARRANTY; without even the implied warranty of -* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -* GNU General Public License for more details. -* -* You should have received a copy of the GNU General Public License -* along with this program; if not, write to the Free Software -* Foundation, Inc., 59 Temple Place, Suite 330, Boston, -* MA 02111-1307 USA -*/ + * Copyright (c) 2010-2012, NVIDIA CORPORATION. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ #include <common.h> #include <asm/io.h> -#include <asm/arch/clock.h> -#include <asm/arch/pinmux.h> #include <asm/arch/tegra.h> -#include <asm/arch-tegra/clk_rst.h> #include <asm/arch-tegra/pmc.h> -#include <asm/arch-tegra/scu.h> #include "../tegra-common/cpu.h" -/* Returns 1 if the current CPU executing is a Cortex-A9, else 0 */ -int ap20_cpu_is_cortexa9(void) -{ - u32 id = readb(NV_PA_PG_UP_BASE + PG_UP_TAG_0); - return id == (PG_UP_TAG_0_PID_CPU & 0xff); -} - -void init_pllx(void) -{ - struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; - struct clk_pll *pll = &clkrst->crc_pll[CLOCK_ID_XCPU]; - u32 reg; - - /* If PLLX is already enabled, just return */ - if (readl(&pll->pll_base) & PLL_ENABLE_MASK) - return; - - /* Set PLLX_MISC */ - writel(1 << PLL_CPCON_SHIFT, &pll->pll_misc); - - /* Use 12MHz clock here */ - reg = PLL_BYPASS_MASK | (12 << PLL_DIVM_SHIFT); - reg |= 1000 << PLL_DIVN_SHIFT; - writel(reg, &pll->pll_base); - - reg |= PLL_ENABLE_MASK; - writel(reg, &pll->pll_base); - - reg &= ~PLL_BYPASS_MASK; - writel(reg, &pll->pll_base); -} - -static void enable_cpu_clock(int enable) -{ - struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; - u32 clk; - - /* - * NOTE: - * Regardless of whether the request is to enable or disable the CPU - * clock, every processor in the CPU complex except the master (CPU 0) - * will have it's clock stopped because the AVP only talks to the - * master. The AVP does not know (nor does it need to know) that there - * are multiple processors in the CPU complex. - */ - - if (enable) { - /* Initialize PLLX */ - init_pllx(); - - /* Wait until all clocks are stable */ - udelay(PLL_STABILIZATION_DELAY); - - writel(CCLK_BURST_POLICY, &clkrst->crc_cclk_brst_pol); - writel(SUPER_CCLK_DIVIDER, &clkrst->crc_super_cclk_div); - } - - /* - * Read the register containing the individual CPU clock enables and - * always stop the clock to CPU 1. - */ - clk = readl(&clkrst->crc_clk_cpu_cmplx); - clk |= 1 << CPU1_CLK_STP_SHIFT; - - /* Stop/Unstop the CPU clock */ - clk &= ~CPU0_CLK_STP_MASK; - clk |= !enable << CPU0_CLK_STP_SHIFT; - writel(clk, &clkrst->crc_clk_cpu_cmplx); - - clock_enable(PERIPH_ID_CPU); -} - -static int is_cpu_powered(void) -{ - struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE; - - return (readl(&pmc->pmc_pwrgate_status) & CPU_PWRED) ? 1 : 0; -} - -static void remove_cpu_io_clamps(void) -{ - struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE; - u32 reg; - - /* Remove the clamps on the CPU I/O signals */ - reg = readl(&pmc->pmc_remove_clamping); - reg |= CPU_CLMP; - writel(reg, &pmc->pmc_remove_clamping); - - /* Give I/O signals time to stabilize */ - udelay(IO_STABILIZATION_DELAY); -} - -static void powerup_cpu(void) -{ - struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE; - u32 reg; - int timeout = IO_STABILIZATION_DELAY; - - if (!is_cpu_powered()) { - /* Toggle the CPU power state (OFF -> ON) */ - reg = readl(&pmc->pmc_pwrgate_toggle); - reg &= PARTID_CP; - reg |= START_CP; - writel(reg, &pmc->pmc_pwrgate_toggle); - - /* Wait for the power to come up */ - while (!is_cpu_powered()) { - if (timeout-- == 0) - printf("CPU failed to power up!\n"); - else - udelay(10); - } - - /* - * Remove the I/O clamps from CPU power partition. - * Recommended only on a Warm boot, if the CPU partition gets - * power gated. Shouldn't cause any harm when called after a - * cold boot according to HW, probably just redundant. - */ - remove_cpu_io_clamps(); - } -} - static void enable_cpu_power_rail(void) { struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE; @@ -173,49 +38,6 @@ static void enable_cpu_power_rail(void) udelay(3750); } -static void reset_A9_cpu(int reset) -{ - /* - * NOTE: Regardless of whether the request is to hold the CPU in reset - * or take it out of reset, every processor in the CPU complex - * except the master (CPU 0) will be held in reset because the - * AVP only talks to the master. The AVP does not know that there - * are multiple processors in the CPU complex. - */ - - /* Hold CPU 1 in reset, and CPU 0 if asked */ - reset_cmplx_set_enable(1, crc_rst_cpu | crc_rst_de | crc_rst_debug, 1); - reset_cmplx_set_enable(0, crc_rst_cpu | crc_rst_de | crc_rst_debug, - reset); - - /* Enable/Disable master CPU reset */ - reset_set_enable(PERIPH_ID_CPU, reset); -} - -static void clock_enable_coresight(int enable) -{ - u32 rst, src; - - clock_set_enable(PERIPH_ID_CORESIGHT, enable); - reset_set_enable(PERIPH_ID_CORESIGHT, !enable); - - if (enable) { - /* - * Put CoreSight on PLLP_OUT0 (216 MHz) and divide it down by - * 1.5, giving an effective frequency of 144MHz. - * Set PLLP_OUT0 [bits31:30 = 00], and use a 7.1 divisor - * (bits 7:0), so 00000001b == 1.5 (n+1 + .5) - */ - src = CLK_DIVIDER(NVBL_PLLP_KHZ, 144000); - clock_ll_set_source_divisor(PERIPH_ID_CSI, 0, src); - - /* Unlock the CPU CoreSight interfaces */ - rst = 0xC5ACCE55; - writel(rst, CSITE_CPU_DBG0_LAR); - writel(rst, CSITE_CPU_DBG1_LAR); - } -} - void start_cpu(u32 reset_vector) { /* Enable VDD_CPU */ @@ -246,13 +68,3 @@ void start_cpu(u32 reset_vector) /* Take the CPU out of reset */ reset_A9_cpu(0); } - - -void halt_avp(void) -{ - for (;;) { - writel((HALT_COP_EVENT_JTAG | HALT_COP_EVENT_IRQ_1 \ - | HALT_COP_EVENT_FIQ_1 | (FLOW_MODE_STOP<<29)), - FLOW_CTLR_HALT_COP_EVENTS); - } -} diff --git a/arch/arm/cpu/arm720t/tegra30/Makefile b/arch/arm/cpu/arm720t/tegra30/Makefile new file mode 100644 index 0000000000..bd969976e9 --- /dev/null +++ b/arch/arm/cpu/arm720t/tegra30/Makefile @@ -0,0 +1,41 @@ +# +# Copyright (c) 2010-2012, NVIDIA CORPORATION. All rights reserved. +# +# (C) Copyright 2000-2008 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# This program is free software; you can redistribute it and/or modify it +# under the terms and conditions of the GNU General Public License, +# version 2, as published by the Free Software Foundation. +# +# This program is distributed in the hope it will be useful, but WITHOUT +# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for +# more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(SOC).o + +COBJS-y += cpu.o + +SRCS := $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS-y)) + +all: $(obj).depend $(LIB) + +$(LIB): $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/arch/arm/cpu/arm720t/tegra30/config.mk b/arch/arm/cpu/arm720t/tegra30/config.mk new file mode 100644 index 0000000000..2388c56db7 --- /dev/null +++ b/arch/arm/cpu/arm720t/tegra30/config.mk @@ -0,0 +1,19 @@ +# +# Copyright (c) 2010-2012, NVIDIA CORPORATION. All rights reserved. +# +# (C) Copyright 2002 +# Gary Jennejohn, DENX Software Engineering, <garyj@denx.de> +# +# This program is free software; you can redistribute it and/or modify it +# under the terms and conditions of the GNU General Public License, +# version 2, as published by the Free Software Foundation. +# +# This program is distributed in the hope it will be useful, but WITHOUT +# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for +# more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# +USE_PRIVATE_LIBGCC = yes diff --git a/arch/arm/cpu/arm720t/tegra30/cpu.c b/arch/arm/cpu/arm720t/tegra30/cpu.c new file mode 100644 index 0000000000..dedcdd9b08 --- /dev/null +++ b/arch/arm/cpu/arm720t/tegra30/cpu.c @@ -0,0 +1,176 @@ +/* + * Copyright (c) 2010-2012, NVIDIA CORPORATION. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/clock.h> +#include <asm/arch/flow.h> +#include <asm/arch/tegra.h> +#include <asm/arch-tegra/clk_rst.h> +#include <asm/arch-tegra/pmc.h> +#include <asm/arch-tegra/tegra_i2c.h> +#include "../tegra-common/cpu.h" + +/* Tegra30-specific CPU init code */ +void tegra_i2c_ll_write_addr(uint addr, uint config) +{ + struct i2c_ctlr *reg = (struct i2c_ctlr *)TEGRA_DVC_BASE; + + writel(addr, ®->cmd_addr0); + writel(config, ®->cnfg); +} + +void tegra_i2c_ll_write_data(uint data, uint config) +{ + struct i2c_ctlr *reg = (struct i2c_ctlr *)TEGRA_DVC_BASE; + + writel(data, ®->cmd_data1); + writel(config, ®->cnfg); +} + +#define TPS65911_I2C_ADDR 0x5A +#define TPS65911_VDDCTRL_OP_REG 0x28 +#define TPS65911_VDDCTRL_SR_REG 0x27 +#define TPS65911_VDDCTRL_OP_DATA (0x2300 | TPS65911_VDDCTRL_OP_REG) +#define TPS65911_VDDCTRL_SR_DATA (0x0100 | TPS65911_VDDCTRL_SR_REG) +#define I2C_SEND_2_BYTES 0x0A02 + +static void enable_cpu_power_rail(void) +{ + struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE; + u32 reg; + + debug("enable_cpu_power_rail entry\n"); + reg = readl(&pmc->pmc_cntrl); + reg |= CPUPWRREQ_OE; + writel(reg, &pmc->pmc_cntrl); + + /* + * Bring up CPU VDD via the TPS65911x PMIC on the DVC I2C bus. + * First set VDD to 1.4V, then enable the VDD regulator. + */ + tegra_i2c_ll_write_addr(TPS65911_I2C_ADDR, 2); + tegra_i2c_ll_write_data(TPS65911_VDDCTRL_OP_DATA, I2C_SEND_2_BYTES); + udelay(1000); + tegra_i2c_ll_write_data(TPS65911_VDDCTRL_SR_DATA, I2C_SEND_2_BYTES); + udelay(10 * 1000); +} + +/** + * The T30 requires some special clock initialization, including setting up + * the dvc i2c, turning on mselect and selecting the G CPU cluster + */ +void t30_init_clocks(void) +{ + struct clk_rst_ctlr *clkrst = + (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; + struct flow_ctlr *flow = (struct flow_ctlr *)NV_PA_FLOW_BASE; + u32 val; + + debug("t30_init_clocks entry\n"); + /* Set active CPU cluster to G */ + clrbits_le32(flow->cluster_control, 1 << 0); + + /* + * Switch system clock to PLLP_OUT4 (108 MHz), AVP will now run + * at 108 MHz. This is glitch free as only the source is changed, no + * special precaution needed. + */ + val = (SCLK_SOURCE_PLLP_OUT4 << SCLK_SWAKEUP_FIQ_SOURCE_SHIFT) | + (SCLK_SOURCE_PLLP_OUT4 << SCLK_SWAKEUP_IRQ_SOURCE_SHIFT) | + (SCLK_SOURCE_PLLP_OUT4 << SCLK_SWAKEUP_RUN_SOURCE_SHIFT) | + (SCLK_SOURCE_PLLP_OUT4 << SCLK_SWAKEUP_IDLE_SOURCE_SHIFT) | + (SCLK_SYS_STATE_RUN << SCLK_SYS_STATE_SHIFT); + writel(val, &clkrst->crc_sclk_brst_pol); + + writel(SUPER_SCLK_ENB_MASK, &clkrst->crc_super_sclk_div); + + val = (0 << CLK_SYS_RATE_HCLK_DISABLE_SHIFT) | + (1 << CLK_SYS_RATE_AHB_RATE_SHIFT) | + (0 << CLK_SYS_RATE_PCLK_DISABLE_SHIFT) | + (0 << CLK_SYS_RATE_APB_RATE_SHIFT); + writel(val, &clkrst->crc_clk_sys_rate); + + /* Put i2c, mselect in reset and enable clocks */ + reset_set_enable(PERIPH_ID_DVC_I2C, 1); + clock_set_enable(PERIPH_ID_DVC_I2C, 1); + reset_set_enable(PERIPH_ID_MSELECT, 1); + clock_set_enable(PERIPH_ID_MSELECT, 1); + + /* Switch MSELECT clock to PLLP (00) */ + clock_ll_set_source(PERIPH_ID_MSELECT, 0); + + /* + * Our high-level clock routines are not available prior to + * relocation. We use the low-level functions which require a + * hard-coded divisor. Use CLK_M with divide by (n + 1 = 17) + */ + clock_ll_set_source_divisor(PERIPH_ID_DVC_I2C, 3, 16); + + /* + * Give clocks time to stabilize, then take i2c and mselect out of + * reset + */ + udelay(1000); + reset_set_enable(PERIPH_ID_DVC_I2C, 0); + reset_set_enable(PERIPH_ID_MSELECT, 0); +} + +static void set_cpu_running(int run) +{ + struct flow_ctlr *flow = (struct flow_ctlr *)NV_PA_FLOW_BASE; + + debug("set_cpu_running entry, run = %d\n", run); + writel(run ? FLOW_MODE_NONE : FLOW_MODE_STOP, &flow->halt_cpu_events); +} + +void start_cpu(u32 reset_vector) +{ + debug("start_cpu entry, reset_vector = %x\n", reset_vector); + t30_init_clocks(); + + /* Enable VDD_CPU */ + enable_cpu_power_rail(); + + set_cpu_running(0); + + /* Hold the CPUs in reset */ + reset_A9_cpu(1); + + /* Disable the CPU clock */ + enable_cpu_clock(0); + + /* Enable CoreSight */ + clock_enable_coresight(1); + + /* + * Set the entry point for CPU execution from reset, + * if it's a non-zero value. + */ + if (reset_vector) + writel(reset_vector, EXCEP_VECTOR_CPU_RESET_VECTOR); + + /* Enable the CPU clock */ + enable_cpu_clock(1); + + /* If the CPU doesn't already have power, power it up */ + powerup_cpu(); + + /* Take the CPU out of reset */ + reset_A9_cpu(0); + + set_cpu_running(1); +} |
