summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--MAINTAINERS2
-rw-r--r--arch/sparc/config.mk14
-rw-r--r--arch/sparc/cpu/leon2/serial.c125
-rw-r--r--arch/sparc/cpu/leon2/start.S60
-rw-r--r--arch/sparc/cpu/leon3/Makefile3
-rw-r--r--arch/sparc/cpu/leon3/ambapp.c545
-rw-r--r--arch/sparc/cpu/leon3/ambapp_low.S784
-rw-r--r--arch/sparc/cpu/leon3/ambapp_low_c.S113
-rw-r--r--arch/sparc/cpu/leon3/cpu_init.c199
-rw-r--r--arch/sparc/cpu/leon3/interrupts.c7
-rw-r--r--arch/sparc/cpu/leon3/memcfg.c237
-rw-r--r--arch/sparc/cpu/leon3/memcfg.h90
-rw-r--r--arch/sparc/cpu/leon3/memcfg_low.S253
-rw-r--r--arch/sparc/cpu/leon3/prom.c12
-rw-r--r--arch/sparc/cpu/leon3/serial.c130
-rw-r--r--arch/sparc/cpu/leon3/start.S102
-rw-r--r--arch/sparc/cpu/leon3/usb_uhci.c4
-rw-r--r--arch/sparc/include/asm/global_data.h1
-rw-r--r--arch/sparc/include/asm/io.h64
-rw-r--r--arch/sparc/include/asm/winmacro.h127
-rw-r--r--common/Kconfig14
-rw-r--r--common/board_r.c21
-rw-r--r--common/cmd_ambapp.c559
-rw-r--r--configs/grsim_defconfig6
-rw-r--r--doc/git-mailrc2
-rw-r--r--drivers/net/greth.c17
-rw-r--r--drivers/serial/Kconfig8
-rw-r--r--include/ambapp.h488
-rw-r--r--include/ambapp_ids.h250
-rw-r--r--include/config_cmd_all.h1
-rw-r--r--include/configs/gr_cpci_ax2000.h35
-rw-r--r--include/configs/gr_ep2s60.h40
-rw-r--r--include/configs/gr_xc3s_1500.h31
-rw-r--r--include/configs/grsim.h88
-rw-r--r--include/configs/grsim_leon2.h5
-rw-r--r--include/grlib/apbuart.h47
-rw-r--r--include/grlib/gptimer.h34
-rw-r--r--include/grlib/greth.h87
-rw-r--r--include/grlib/irqmp.h23
39 files changed, 3355 insertions, 1273 deletions
diff --git a/MAINTAINERS b/MAINTAINERS
index bf60c67668..b3a45ccbac 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -370,7 +370,7 @@ T: git git://git.denx.de/u-boot-sh.git
F: arch/sh/
SPARC
-M: Daniel Hellstrom <daniel@gaisler.com>
+M: Francois Retief <fgretief@spaceteq.co.za>
S: Maintained
T: git git://git.denx.de/u-boot-sparc.git
F: arch/sparc/
diff --git a/arch/sparc/config.mk b/arch/sparc/config.mk
index d615f294fe..43faad48ce 100644
--- a/arch/sparc/config.mk
+++ b/arch/sparc/config.mk
@@ -1,19 +1,25 @@
#
-# (C) Copyright 2007
-# Daniel Hellstrom, Gaisler Research, daniel@gaisler.com
+# (C) Copyright 2015
+# Daniel Hellstrom, Cobham Gaisler, daniel@gaisler.com.
#
# SPDX-License-Identifier: GPL-2.0+
#
ifeq ($(CROSS_COMPILE),)
-CROSS_COMPILE := sparc-elf-
+CROSS_COMPILE := sparc-linux-
endif
+# This GCC compiler is known to work:
+# https://www.kernel.org/pub/tools/crosstool/files/bin/x86_64/4.9.0/
+
gcclibdir := $(shell dirname `$(CC) -print-libgcc-file-name`)
CONFIG_STANDALONE_LOAD_ADDR ?= 0x00000000 -L $(gcclibdir) \
-T $(srctree)/examples/standalone/sparc.lds
-PLATFORM_CPPFLAGS += -D__sparc__
+cpuflags-$(CONFIG_LEON2) := -mcpu=leon
+cpuflags-$(CONFIG_LEON3) := -mcpu=leon3
+
+PLATFORM_CPPFLAGS += $(cpuflags-y)
PLATFORM_RELFLAGS += -fPIC
diff --git a/arch/sparc/cpu/leon2/serial.c b/arch/sparc/cpu/leon2/serial.c
index 5cfbb9ed15..603364ee0b 100644
--- a/arch/sparc/cpu/leon2/serial.c
+++ b/arch/sparc/cpu/leon2/serial.c
@@ -1,72 +1,78 @@
/* GRLIB APBUART Serial controller driver
*
- * (C) Copyright 2008
- * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com.
+ * (C) Copyright 2008, 2015
+ * Daniel Hellstrom, Cobham Gaisler, daniel@gaisler.com.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
-#include <asm/processor.h>
-#include <asm/leon.h>
+#include <asm/io.h>
#include <serial.h>
-#include <linux/compiler.h>
+#include <watchdog.h>
DECLARE_GLOBAL_DATA_PTR;
+static unsigned leon2_serial_calc_scaler(unsigned freq, unsigned baud)
+{
+ return (((freq*10) / (baud*8)) - 5) / 10;
+}
+
static int leon2_serial_init(void)
{
- LEON2_regs *leon2 = (LEON2_regs *) LEON2_PREGS;
+ LEON2_regs *leon2 = (LEON2_regs *)LEON2_PREGS;
LEON2_Uart_regs *regs;
unsigned int tmp;
- /* Init LEON2 UART
- *
- * Set scaler / baud rate
- *
- * Receiver & transmitter enable
- */
#if LEON2_CONSOLE_SELECT == LEON_CONSOLE_UART1
- regs = (LEON2_Uart_regs *) & leon2->UART_Channel_1;
+ regs = (LEON2_Uart_regs *)&leon2->UART_Channel_1;
#else
- regs = (LEON2_Uart_regs *) & leon2->UART_Channel_2;
+ regs = (LEON2_Uart_regs *)&leon2->UART_Channel_2;
#endif
- regs->UART_Scaler = CONFIG_SYS_LEON2_UART1_SCALER;
+ /* Set scaler / baud rate */
+ tmp = leon2_serial_calc_scaler(CONFIG_SYS_CLK_FREQ, CONFIG_BAUDRATE);
+ writel(tmp, &regs->UART_Scaler);
/* Let bit 11 be unchanged (debug bit for GRMON) */
- tmp = READ_WORD(regs->UART_Control);
+ tmp = readl(&regs->UART_Control) & LEON2_UART_CTRL_DBG;
+ tmp |= (LEON2_UART1_LOOPBACK_ENABLE << 7);
+ tmp |= (LEON2_UART1_FLOWCTRL_ENABLE << 6);
+ tmp |= (LEON2_UART1_PARITY_ENABLE << 5);
+ tmp |= (LEON2_UART1_ODDPAR_ENABLE << 4);
+ /* Receiver & transmitter enable */
+ tmp |= (LEON2_UART_CTRL_RE | LEON2_UART_CTRL_TE);
+ writel(tmp, &regs->UART_Control);
+
+ gd->arch.uart = regs;
+ return 0;
+}
- regs->UART_Control = ((tmp & LEON2_UART_CTRL_DBG) |
- (LEON2_UART1_LOOPBACK_ENABLE << 7) |
- (LEON2_UART1_FLOWCTRL_ENABLE << 6) |
- (LEON2_UART1_PARITY_ENABLE << 5) |
- (LEON2_UART1_ODDPAR_ENABLE << 4) |
- LEON2_UART_CTRL_RE | LEON2_UART_CTRL_TE);
+static inline LEON2_Uart_regs *leon2_get_uart_regs(void)
+{
+ LEON2_Uart_regs *uart = gd->arch.uart;
- return 0;
+ return uart;
}
static void leon2_serial_putc_raw(const char c)
{
- LEON2_regs *leon2 = (LEON2_regs *) LEON2_PREGS;
- LEON2_Uart_regs *regs;
+ LEON2_Uart_regs *uart = leon2_get_uart_regs();
-#if LEON2_CONSOLE_SELECT == LEON_CONSOLE_UART1
- regs = (LEON2_Uart_regs *) & leon2->UART_Channel_1;
-#else
- regs = (LEON2_Uart_regs *) & leon2->UART_Channel_2;
-#endif
+ if (!uart)
+ return;
/* Wait for last character to go. */
- while (!(READ_WORD(regs->UART_Status) & LEON2_UART_STAT_THE)) ;
+ while (!(readl(&uart->UART_Status) & LEON2_UART_STAT_THE))
+ WATCHDOG_RESET();
/* Send data */
- regs->UART_Channel = c;
+ writel(c, &uart->UART_Channel);
#ifdef LEON_DEBUG
/* Wait for data to be sent */
- while (!(READ_WORD(regs->UART_Status) & LEON2_UART_STAT_TSE)) ;
+ while (!(readl(&uart->UART_Status) & LEON2_UART_STAT_TSE))
+ WATCHDOG_RESET();
#endif
}
@@ -80,56 +86,43 @@ static void leon2_serial_putc(const char c)
static int leon2_serial_getc(void)
{
- LEON2_regs *leon2 = (LEON2_regs *) LEON2_PREGS;
- LEON2_Uart_regs *regs;
+ LEON2_Uart_regs *uart = leon2_get_uart_regs();
-#if LEON2_CONSOLE_SELECT == LEON_CONSOLE_UART1
- regs = (LEON2_Uart_regs *) & leon2->UART_Channel_1;
-#else
- regs = (LEON2_Uart_regs *) & leon2->UART_Channel_2;
-#endif
+ if (!uart)
+ return 0;
/* Wait for a character to arrive. */
- while (!(READ_WORD(regs->UART_Status) & LEON2_UART_STAT_DR)) ;
+ while (!(readl(&uart->UART_Status) & LEON2_UART_STAT_DR))
+ WATCHDOG_RESET();
- /* read data */
- return READ_WORD(regs->UART_Channel);
+ /* Read character data */
+ return readl(&uart->UART_Channel);
}
static int leon2_serial_tstc(void)
{
- LEON2_regs *leon2 = (LEON2_regs *) LEON2_PREGS;
- LEON2_Uart_regs *regs;
+ LEON2_Uart_regs *uart = leon2_get_uart_regs();
-#if LEON2_CONSOLE_SELECT == LEON_CONSOLE_UART1
- regs = (LEON2_Uart_regs *) & leon2->UART_Channel_1;
-#else
- regs = (LEON2_Uart_regs *) & leon2->UART_Channel_2;
-#endif
+ if (!uart)
+ return 0;
- return (READ_WORD(regs->UART_Status) & LEON2_UART_STAT_DR);
+ return readl(&uart->UART_Status) & LEON2_UART_STAT_DR;
}
-/* set baud rate for uart */
static void leon2_serial_setbrg(void)
{
- /* update baud rate settings, read it from gd->baudrate */
+ LEON2_Uart_regs *uart = leon2_get_uart_regs();
unsigned int scaler;
- LEON2_regs *leon2 = (LEON2_regs *) LEON2_PREGS;
- LEON2_Uart_regs *regs;
-#if LEON2_CONSOLE_SELECT == LEON_CONSOLE_UART1
- regs = (LEON2_Uart_regs *) & leon2->UART_Channel_1;
-#else
- regs = (LEON2_Uart_regs *) & leon2->UART_Channel_2;
-#endif
+ if (!uart)
+ return;
+
+ if (!gd->baudrate)
+ gd->baudrate = CONFIG_BAUDRATE;
+
+ scaler = leon2_serial_calc_scaler(CONFIG_SYS_CLK_FREQ, CONFIG_BAUDRATE);
- if (gd->baudrate > 0) {
- scaler =
- (((CONFIG_SYS_CLK_FREQ * 10) / (gd->baudrate * 8)) -
- 5) / 10;
- regs->UART_Scaler = scaler;
- }
+ writel(scaler, &uart->UART_Scaler);
}
static struct serial_device leon2_serial_drv = {
diff --git a/arch/sparc/cpu/leon2/start.S b/arch/sparc/cpu/leon2/start.S
index e43097cf9b..974de76852 100644
--- a/arch/sparc/cpu/leon2/start.S
+++ b/arch/sparc/cpu/leon2/start.S
@@ -57,6 +57,27 @@ MINFRAME = (WINDOWSIZE + ARGPUSHSIZE + 4)
#error Must define number of SPARC register windows, default is 8
#endif
+/* Macros to load address into a register. Uses GOT table for PIC */
+#ifdef __PIC__
+
+#define SPARC_PIC_THUNK_CALL(reg) \
+ sethi %pc22(_GLOBAL_OFFSET_TABLE_-4), %##reg; \
+ call __sparc_get_pc_thunk.reg; \
+ add %##reg, %pc10(_GLOBAL_OFFSET_TABLE_+4), %##reg;
+
+#define SPARC_LOAD_ADDRESS(sym, got, reg) \
+ sethi %gdop_hix22(sym), %##reg; \
+ xor %##reg, %gdop_lox10(sym), %##reg; \
+ ld [%##got + %##reg], %##reg, %gdop(sym);
+
+#else
+
+#define SPARC_PIC_THUNK_CALL(reg)
+#define SPARC_LOAD_ADDRESS(sym, got, tmp) \
+ set sym, %##reg;
+
+#endif
+
#define STACK_ALIGN 8
#define SA(X) (((X)+(STACK_ALIGN-1)) & ~(STACK_ALIGN-1))
@@ -278,7 +299,7 @@ leon2_init_mctrl:
srl %g2, 30, %g2
andcc %g2, 3, %g6
bne,a leon2_init_wim
- mov %g0, %asr16 ! clear err_reg
+ mov %g0, %asr16 ! clear err_reg
leon2_init_wim:
set WIM_INIT, %g3
@@ -299,7 +320,7 @@ leon2_init_stackp:
cpu_init_unreloc:
call cpu_init_f
- nop
+ nop
/* un relocated start address of monitor */
#define TEXT_START _text
@@ -307,9 +328,10 @@ cpu_init_unreloc:
/* un relocated end address of monitor */
#define DATA_END __init_end
+ SPARC_PIC_THUNK_CALL(l7)
reloc:
- set TEXT_START,%g2
- set DATA_END,%g3
+ SPARC_LOAD_ADDRESS(TEXT_START, l7, g2)
+ SPARC_LOAD_ADDRESS(DATA_END, l7, g3)
set CONFIG_SYS_RELOC_MONITOR_BASE,%g4
reloc_loop:
ldd [%g2],%l0
@@ -319,7 +341,7 @@ reloc_loop:
inc 16,%g2
subcc %g3,%g2,%g0
bne reloc_loop
- inc 16,%g4
+ inc 16,%g4
clr %l0
clr %l1
@@ -336,8 +358,8 @@ reloc_loop:
clr_bss:
/* clear bss area (the relocated) */
- set __bss_start,%g2
- set __bss_end,%g3
+ SPARC_LOAD_ADDRESS(__bss_start, l7, g2)
+ SPARC_LOAD_ADDRESS(__bss_end, l7, g3)
sub %g3,%g2,%g3
add %g3,%g4,%g3
clr %g1 /* std %g0 uses g0 and g1 */
@@ -348,19 +370,19 @@ clr_bss_16:
inc 16,%g4
cmp %g3,%g4
bne clr_bss_16
- nop
+ nop
/* add offsets to GOT table */
fixup_got:
- set __got_start,%g4
- set __got_end,%g3
+ SPARC_LOAD_ADDRESS(__got_start, l7, g4)
+ SPARC_LOAD_ADDRESS(__got_end, l7, g3)
/*
* new got offset = (old GOT-PTR (read with ld) -
* CONFIG_SYS_RELOC_MONITOR_BASE(from define) ) +
* Destination Address (from define)
*/
set CONFIG_SYS_RELOC_MONITOR_BASE,%g2
- set TEXT_START, %g1
+ SPARC_LOAD_ADDRESS(TEXT_START, l7, g1)
add %g4,%g2,%g4
sub %g4,%g1,%g4
add %g3,%g2,%g3
@@ -375,11 +397,11 @@ got_loop:
inc 4,%g4
cmp %g3,%g4
bne got_loop
- nop
+ nop
prom_relocate:
- set __prom_start, %g2
- set __prom_end, %g3
+ SPARC_LOAD_ADDRESS(__prom_start, l7, g2)
+ SPARC_LOAD_ADDRESS(__prom_end, l7, g3)
set CONFIG_SYS_PROM_OFFSET, %g4
prom_relocate_loop:
@@ -390,7 +412,7 @@ prom_relocate_loop:
inc 16,%g2
subcc %g3,%g2,%g0
bne prom_relocate_loop
- inc 16,%g4
+ inc 16,%g4
/* Trap table has been moved, lets tell CPU about
* the new trap table address
@@ -403,19 +425,19 @@ prom_relocate_loop:
nop
/* Call relocated init functions */
jump:
- set cpu_init_f2,%o1
+ SPARC_LOAD_ADDRESS(cpu_init_f2, l7, o1)
set CONFIG_SYS_RELOC_MONITOR_BASE,%o2
add %o1,%o2,%o1
sub %o1,%g1,%o1
call %o1
- clr %o0
+ clr %o0
- set board_init_f,%o1
+ SPARC_LOAD_ADDRESS(board_init_f, l7, o1)
set CONFIG_SYS_RELOC_MONITOR_BASE,%o2
add %o1,%o2,%o1
sub %o1,%g1,%o1
call %o1
- clr %o0
+ clr %o0
dead: ta 0 ! if call returns...
nop
diff --git a/arch/sparc/cpu/leon3/Makefile b/arch/sparc/cpu/leon3/Makefile
index 4f13ec3071..f4cf43cfec 100644
--- a/arch/sparc/cpu/leon3/Makefile
+++ b/arch/sparc/cpu/leon3/Makefile
@@ -6,4 +6,5 @@
#
extra-y = start.o
-obj-y = cpu_init.o serial.o cpu.o ambapp.o interrupts.o prom.o usb_uhci.o
+obj-y = cpu_init.o serial.o cpu.o ambapp.o ambapp_low.o ambapp_low_c.o \
+ interrupts.o prom.o usb_uhci.o memcfg.o memcfg_low.o
diff --git a/arch/sparc/cpu/leon3/ambapp.c b/arch/sparc/cpu/leon3/ambapp.c
index a30d1f2a99..b8ac05faf1 100644
--- a/arch/sparc/cpu/leon3/ambapp.c
+++ b/arch/sparc/cpu/leon3/ambapp.c
@@ -1,343 +1,316 @@
-/* Gaisler AMBA Plug&Play bus scanning. Functions
- * ending on _nomem is inteded to be used only during
- * initialization, only registers are used (no ram).
+/* GRLIB AMBA Plug&Play information scanning, relies on assembler
+ * routines.
*
- * (C) Copyright 2007
- * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com
+ * (C) Copyright 2010, 2015
+ * Daniel Hellstrom, Cobham Gaisler, daniel@gaisler.com.
*
* SPDX-License-Identifier: GPL-2.0+
*/
+/* #define DEBUG */
+
#include <common.h>
-#include <command.h>
+#include <malloc.h>
#include <ambapp.h>
+#include <config.h>
+
+/************ C INTERFACE OF ASSEMBLER SCAN ROUTINES ************/
+struct ambapp_find_apb_info {
+ /* Address of APB device Plug&Play information */
+ struct ambapp_pnp_apb *pnp;
+ /* AHB Bus index of where the APB-Master Bridge device was found */
+ int ahb_bus_index;
+ int dec_index;
+};
-#if defined(CONFIG_CMD_AMBAPP)
-extern void ambapp_print_apb(apbctrl_pp_dev * apb,
- ambapp_ahbdev * apbmst, int index);
-extern void ambapp_print_ahb(ahbctrl_pp_dev * ahb, int index);
-extern int ambapp_apb_print;
-extern int ambapp_ahb_print;
-#endif
-
-static int ambapp_apb_scan(unsigned int vendor, /* Plug&Play Vendor ID */
- unsigned int driver, /* Plug&Play Device ID */
- ambapp_apbdev * dev, /* Result(s) is placed here */
- int index, /* Index of device to start copying Plug&Play
- * info into dev
- */
- int max_cnt /* Maximal count that dev can hold, if dev
- * is NULL function will stop scanning after
- * max_cnt devices are found.
- */
- )
-{
- int i, cnt = 0;
- unsigned int apbmst_base;
- ambapp_ahbdev apbmst;
- apbctrl_pp_dev *apb;
-
- if (max_cnt == 0)
- return 0;
-
- /* Get AMBA APB Master */
- if (ambapp_ahbslv_first(VENDOR_GAISLER, GAISLER_APBMST, &apbmst) != 1) {
- return 0;
- }
+struct ambapp_find_ahb_info {
+ /* Address of AHB device Plug&Play information */
+ struct ambapp_pnp_ahb *pnp;
+ /* AHB Bus index of where the AHB device was found */
+ int ahb_bus_index;
+ int dec_index;
+};
- /* Get APB CTRL Plug&Play info area */
- apbmst_base = apbmst.address[0] & LEON3_IO_AREA;
- apb = (apbctrl_pp_dev *) (apbmst_base | LEON3_CONF_AREA);
+extern void ambapp_find_buses(unsigned int ioarea, struct ambapp_bus *abus);
- for (i = 0; i < LEON3_APB_SLAVES; i++) {
-#if defined(CONFIG_CMD_AMBAPP)
- if (ambapp_apb_print && amba_vendor(apb->conf)
- && amba_device(apb->conf)) {
- ambapp_print_apb(apb, &apbmst, i);
- }
-#endif
- if ((amba_vendor(apb->conf) == vendor) &&
- (amba_device(apb->conf) == driver) && ((index < 0)
- || (index-- == 0))) {
- /* Convert Plug&Play info into a more readable format */
- cnt++;
- if (dev) {
- dev->irq = amba_irq(apb->conf);
- dev->ver = amba_ver(apb->conf);
- dev->address =
- (apbmst_base |
- (((apb->
- bar & 0xfff00000) >> 12))) & (((apb->
- bar &
- 0x0000fff0)
- << 4) |
- 0xfff00000);
- dev++;
- }
- /* found max devices? */
- if (cnt >= max_cnt)
- return cnt;
- }
- /* Get next Plug&Play entry */
- apb++;
- }
- return cnt;
-}
+extern int ambapp_find_apb(struct ambapp_bus *abus, unsigned int dev_vend,
+ int index, struct ambapp_find_apb_info *result);
-unsigned int ambapp_apb_next_nomem(register unsigned int vendor, /* Plug&Play Vendor ID */
- register unsigned int driver, /* Plug&Play Device ID */
- register int index)
-{
- register int i;
- register ahbctrl_pp_dev *apbmst;
- register apbctrl_pp_dev *apb;
- register unsigned int apbmst_base;
-
- /* APBMST is a AHB Slave */
- apbmst = ambapp_ahb_next_nomem(VENDOR_GAISLER, GAISLER_APBMST, 1, 0);
- if (!apbmst)
- return 0;
-
- apbmst_base = amba_membar_start(apbmst->bars[0]);
- if (amba_membar_type(apbmst->bars[0]) == AMBA_TYPE_AHBIO)
- apbmst_base = AMBA_TYPE_AHBIO_ADDR(apbmst_base);
- apbmst_base &= LEON3_IO_AREA;
-
- /* Find the vendor/driver device on the first APB bus */
- apb = (apbctrl_pp_dev *) (apbmst_base | LEON3_CONF_AREA);
-
- for (i = 0; i < LEON3_APB_SLAVES; i++) {
- if ((amba_vendor(apb->conf) == vendor) &&
- (amba_device(apb->conf) == driver) && ((index < 0)
- || (index-- == 0))) {
- /* Convert Plug&Play info info a more readable format */
- return (apbmst_base | (((apb->bar & 0xfff00000) >> 12)))
- & (((apb->bar & 0x0000fff0) << 4) | 0xfff00000);
- }
- /* Get next Plug&Play entry */
- apb++;
- }
- return 0;
-}
+extern int ambapp_find_ahb(struct ambapp_bus *abus, unsigned int dev_vend,
+ int index, int type, struct ambapp_find_ahb_info *result);
-/****************************** APB SLAVES ******************************/
+/************ C ROUTINES USED BY U-BOOT AMBA CORE DRIVERS ************/
+struct ambapp_bus ambapp_plb;
-int ambapp_apb_count(unsigned int vendor, unsigned int driver)
+void ambapp_bus_init(
+ unsigned int ioarea,
+ unsigned int freq,
+ struct ambapp_bus *abus)
{
- return ambapp_apb_scan(vendor, driver, NULL, 0, LEON3_APB_SLAVES);
+ int i;
+
+ ambapp_find_buses(ioarea, abus);
+ for (i = 0; i < 6; i++)
+ if (abus->ioareas[i] == 0)
+ break;
+ abus->buses = i;
+ abus->freq = freq;
}
-int ambapp_apb_first(unsigned int vendor,
- unsigned int driver, ambapp_apbdev * dev)
+/* Parse APB PnP Information */
+void ambapp_apb_parse(struct ambapp_find_apb_info *info, ambapp_apbdev *dev)
{
- return ambapp_apb_scan(vendor, driver, dev, 0, 1);
+ struct ambapp_pnp_apb *apb = info->pnp;
+ unsigned int apbbase = (unsigned int)apb & 0xfff00000;
+
+ dev->vendor = amba_vendor(apb->id);
+ dev->device = amba_device(apb->id);
+ dev->irq = amba_irq(apb->id);
+ dev->ver = amba_ver(apb->id);
+ dev->address = (apbbase | (((apb->iobar & 0xfff00000) >> 12))) &
+ (((apb->iobar & 0x0000fff0) << 4) | 0xfff00000);
+ dev->mask = amba_apb_mask(apb->iobar);
+ dev->ahb_bus_index = info->ahb_bus_index - 1;
}
-int ambapp_apb_next(unsigned int vendor,
- unsigned int driver, ambapp_apbdev * dev, int index)
+/* Parse AHB PnP information */
+void ambapp_ahb_parse(struct ambapp_find_ahb_info *info, ambapp_ahbdev *dev)
{
- return ambapp_apb_scan(vendor, driver, dev, index, 1);
+ struct ambapp_pnp_ahb *ahb = info->pnp;
+ unsigned int ahbbase = (unsigned int)ahb & 0xfff00000;
+ int i, type;
+ unsigned int addr, mask, mbar;
+
+ dev->vendor = amba_vendor(ahb->id);
+ dev->device = amba_device(ahb->id);
+ dev->irq = amba_irq(ahb->id);
+ dev->ver = amba_ver(ahb->id);
+ dev->userdef[0] = ahb->custom[0];
+ dev->userdef[1] = ahb->custom[1];
+ dev->userdef[2] = ahb->custom[2];
+ dev->ahb_bus_index = info->ahb_bus_index - 1;
+ for (i = 0; i < 4; i++) {
+ mbar = ahb->mbar[i];
+ addr = amba_membar_start(mbar);
+ type = amba_membar_type(mbar);
+ if (type == AMBA_TYPE_AHBIO) {
+ addr = amba_ahbio_adr(addr, ahbbase);
+ mask = (((unsigned int)
+ (amba_membar_mask((~mbar))<<8)|0xff))+1;
+ } else {
+ /* AHB memory area, absolute address */
+ mask = (~((unsigned int)
+ (amba_membar_mask(mbar)<<20)))+1;
+ }
+ dev->address[i] = addr;
+ dev->mask[i] = mask;
+ dev->type[i] = type;
+ }
}
-int ambapp_apbs_first(unsigned int vendor,
- unsigned int driver, ambapp_apbdev * dev, int max_cnt)
+int ambapp_apb_find(struct ambapp_bus *abus, int vendor, int device,
+ int index, ambapp_apbdev *dev)
{
- return ambapp_apb_scan(vendor, driver, dev, 0, max_cnt);
-}
+ unsigned int devid = AMBA_PNP_ID(vendor, device);
+ int found;
+ struct ambapp_find_apb_info apbdev;
-enum {
- AHB_SCAN_MASTER = 0,
- AHB_SCAN_SLAVE = 1
-};
-
-/* Scan AMBA Plug&Play bus for AMBA AHB Masters or AHB Slaves
- * for a certain matching Vendor and Device ID.
- *
- * Return number of devices found.
- *
- * Compact edition...
- */
-static int ambapp_ahb_scan(unsigned int vendor, /* Plug&Play Vendor ID */
- unsigned int driver, /* Plug&Play Device ID */
- ambapp_ahbdev * dev, /* Result(s) is placed here */
- int index, /* Index of device to start copying Plug&Play
- * info into dev
- */
- int max_cnt, /* Maximal count that dev can hold, if dev
- * is NULL function will stop scanning after
- * max_cnt devices are found.
- */
- int type /* Selectes what type of devices to scan.
- * 0=AHB Masters
- * 1=AHB Slaves
- */
- )
-{
- int i, j, cnt = 0, max_pp_devs;
- unsigned int addr;
- ahbctrl_info *info = (ahbctrl_info *) (LEON3_IO_AREA | LEON3_CONF_AREA);
- ahbctrl_pp_dev *ahb;
-
- if (max_cnt == 0)
- return 0;
-
- if (type == 0) {
- max_pp_devs = LEON3_AHB_MASTERS;
- ahb = info->masters;
- } else {
- max_pp_devs = LEON3_AHB_SLAVES;
- ahb = info->slaves;
- }
+ found = ambapp_find_apb(abus, devid, index, &apbdev);
+ if (found == 1)
+ ambapp_apb_parse(&apbdev, dev);
- for (i = 0; i < max_pp_devs; i++) {
-#if defined(CONFIG_CMD_AMBAPP)
- if (ambapp_ahb_print && amba_vendor(ahb->conf) &&
- amba_device(ahb->conf)) {
- ambapp_print_ahb(ahb, i);
- }
-#endif
- if ((amba_vendor(ahb->conf) == vendor) &&
- (amba_device(ahb->conf) == driver) &&
- ((index < 0) || (index-- == 0))) {
- /* Convert Plug&Play info info a more readable format */
- cnt++;
- if (dev) {
- dev->irq = amba_irq(ahb->conf);
- dev->ver = amba_ver(ahb->conf);
- dev->userdef[0] = ahb->userdef[0];
- dev->userdef[1] = ahb->userdef[1];
- dev->userdef[2] = ahb->userdef[2];
- for (j = 0; j < 4; j++) {
- addr = amba_membar_start(ahb->bars[j]);
- if (amba_membar_type(ahb->bars[j]) ==
- AMBA_TYPE_AHBIO)
- addr =
- AMBA_TYPE_AHBIO_ADDR(addr);
- dev->address[j] = addr;
- }
- dev++;
- }
- /* found max devices? */
- if (cnt >= max_cnt)
- return cnt;
- }
- /* Get next Plug&Play entry */
- ahb++;
- }
- return cnt;
+ return found;
}
-unsigned int ambapp_ahb_get_info(ahbctrl_pp_dev * ahb, int info)
+int ambapp_apb_count(struct ambapp_bus *abus, int vendor, int device)
{
- register unsigned int ret;
-
- if (!ahb)
- return 0;
-
- switch (info) {
- default:
- info = 0;
- case 0:
- case 1:
- case 2:
- case 3:
- /* Get Address from PnP Info */
- ret = amba_membar_start(ahb->bars[info]);
- if (amba_membar_type(ahb->bars[info]) == AMBA_TYPE_AHBIO)
- ret = AMBA_TYPE_AHBIO_ADDR(ret);
- return ret;
- }
- return 0;
-
+ unsigned int devid = AMBA_PNP_ID(vendor, device);
+ int found;
+ struct ambapp_find_apb_info apbdev;
+
+ found = ambapp_find_apb(abus, devid, 63, &apbdev);
+ if (found == 1)
+ return 64;
+ else
+ return 63 - apbdev.dec_index;
}
-ahbctrl_pp_dev *ambapp_ahb_next_nomem(register unsigned int vendor, /* Plug&Play Vendor ID */
- register unsigned int driver, /* Plug&Play Device ID */
- register unsigned int opts, /* 1=slave, 0=master */
- register int index)
+int ambapp_ahb_find(struct ambapp_bus *abus, int vendor, int device,
+ int index, ambapp_ahbdev *dev, int type)
{
- register ahbctrl_pp_dev *ahb;
- register ahbctrl_info *info =
- (ahbctrl_info *) (LEON3_IO_AREA | LEON3_CONF_AREA);
- register int i;
- register int max_pp_devs;
-
- if (opts == 0) {
- max_pp_devs = LEON3_AHB_MASTERS;
- ahb = info->masters;
- } else {
- max_pp_devs = LEON3_AHB_SLAVES;
- ahb = info->slaves;
- }
+ int found;
+ struct ambapp_find_ahb_info ahbdev;
+ unsigned int devid = AMBA_PNP_ID(vendor, device);
- for (i = 0; i < max_pp_devs; i++) {
- if ((amba_vendor(ahb->conf) == vendor) &&
- (amba_device(ahb->conf) == driver) &&
- ((index < 0) || (index-- == 0))) {
- /* Convert Plug&Play info info a more readable format */
- return ahb;
- }
- /* Get next Plug&Play entry */
- ahb++;
- }
- return 0;
+ found = ambapp_find_ahb(abus, devid, index, type, &ahbdev);
+ if (found == 1)
+ ambapp_ahb_parse(&ahbdev, dev);
+
+ return found;
}
-/****************************** AHB MASTERS ******************************/
-int ambapp_ahbmst_count(unsigned int vendor, unsigned int driver)
+int ambapp_ahbmst_find(struct ambapp_bus *abus, int vendor, int device,
+ int index, ambapp_ahbdev *dev)
{
- /* Get number of devices of this vendor&device ID */
- return ambapp_ahb_scan(vendor, driver, NULL, 0, LEON3_AHB_MASTERS,
- AHB_SCAN_MASTER);
+ return ambapp_ahb_find(abus, vendor, device, index, dev, DEV_AHB_MST);
}
-int ambapp_ahbmst_first(unsigned int vendor, unsigned int driver,
- ambapp_ahbdev * dev)
+int ambapp_ahbslv_find(struct ambapp_bus *abus, int vendor, int device,
+ int index, ambapp_ahbdev *dev)
{
- /* find first device of this */
- return ambapp_ahb_scan(vendor, driver, dev, 0, 1, AHB_SCAN_MASTER);
+ return ambapp_ahb_find(abus, vendor, device, index, dev, DEV_AHB_SLV);
}
-int ambapp_ahbmst_next(unsigned int vendor,
- unsigned int driver, ambapp_ahbdev * dev, int index)
+int ambapp_ahb_count(struct ambapp_bus *abus, int vendor, int device, int type)
{
- /* find first device of this */
- return ambapp_ahb_scan(vendor, driver, dev, index, 1, AHB_SCAN_MASTER);
+ int found;
+ struct ambapp_find_ahb_info ahbdev;
+ unsigned int devid = AMBA_PNP_ID(vendor, device);
+
+ found = ambapp_find_ahb(abus, devid, 63, type, &ahbdev);
+ if (found == 1)
+ return 64;
+ else
+ return 63 - ahbdev.dec_index;
}
-int ambapp_ahbmsts_first(unsigned int vendor,
- unsigned int driver, ambapp_ahbdev * dev, int max_cnt)
+int ambapp_ahbmst_count(struct ambapp_bus *abus, int vendor, int device)
{
- /* find first device of this */
- return ambapp_ahb_scan(vendor, driver, dev, 0, max_cnt,
- AHB_SCAN_MASTER);
+ return ambapp_ahb_count(abus, vendor, device, DEV_AHB_MST);
}
-/****************************** AHB SLAVES ******************************/
-int ambapp_ahbslv_count(unsigned int vendor, unsigned int driver)
+int ambapp_ahbslv_count(struct ambapp_bus *abus, int vendor, int device)
{
- /* Get number of devices of this vendor&device ID */
- return ambapp_ahb_scan(vendor, driver, NULL, 0, LEON3_AHB_SLAVES,
- AHB_SCAN_SLAVE);
+ return ambapp_ahb_count(abus, vendor, device, DEV_AHB_SLV);
}
-int ambapp_ahbslv_first(unsigned int vendor, unsigned int driver,
- ambapp_ahbdev * dev)
+/* The define CONFIG_SYS_GRLIB_SINGLE_BUS may be defined on GRLIB systems
+ * where only one AHB Bus is available - no bridges are present. This option
+ * is available only to reduce the footprint.
+ *
+ * Defining this on a multi-bus GRLIB system may also work depending on the
+ * design.
+ */
+
+#ifndef CONFIG_SYS_GRLIB_SINGLE_BUS
+
+/* GAISLER AHB2AHB Version 1 Bridge Definitions */
+#define AHB2AHB_V1_FLAG_FFACT 0x0f0 /* Frequency factor against top bus */
+#define AHB2AHB_V1_FLAG_FFACT_DIR 0x100 /* Factor direction, 0=down, 1=up */
+#define AHB2AHB_V1_FLAG_MBUS 0x00c /* Master bus number mask */
+#define AHB2AHB_V1_FLAG_SBUS 0x003 /* Slave bus number mask */
+
+/* Get Parent bus frequency. Note that since we go from a "child" bus
+ * to a parent bus, the frequency factor direction is inverted.
+ */
+unsigned int gaisler_ahb2ahb_v1_freq(ambapp_ahbdev *ahb, unsigned int freq)
{
- /* find first device of this */
- return ambapp_ahb_scan(vendor, driver, dev, 0, 1, AHB_SCAN_SLAVE);
+ int dir;
+ unsigned char ffact;
+
+ /* Get division/multiple factor */
+ ffact = (ahb->userdef[0] & AHB2AHB_V1_FLAG_FFACT) >> 4;
+ if (ffact != 0) {
+ dir = ahb->userdef[0] & AHB2AHB_V1_FLAG_FFACT_DIR;
+
+ /* Calculate frequency by dividing or
+ * multiplying system frequency
+ */
+ if (dir)
+ freq = freq * ffact;
+ else
+ freq = freq / ffact;
+ }
+
+ return freq;
}
-int ambapp_ahbslv_next(unsigned int vendor,
- unsigned int driver, ambapp_ahbdev * dev, int index)
+/* AHB2AHB and L2CACHE ver 2 is not supported yet. */
+unsigned int gaisler_ahb2ahb_v2_freq(ambapp_ahbdev *ahb, unsigned int freq)
{
- /* find first device of this */
- return ambapp_ahb_scan(vendor, driver, dev, index, 1, AHB_SCAN_SLAVE);
+ panic("gaisler_ahb2ahb_v2_freq: AHB2AHB ver 2 not supported\n");
+ return -1;
}
+#endif
-int ambapp_ahbslvs_first(unsigned int vendor,
- unsigned int driver, ambapp_ahbdev * dev, int max_cnt)
+/* Return the frequency of a AHB bus identified by index found
+ * note that this is not the AHB Bus number.
+ */
+unsigned int ambapp_bus_freq(struct ambapp_bus *abus, int ahb_bus_index)
{
- /* find first device of this */
- return ambapp_ahb_scan(vendor, driver, dev, 0, max_cnt, AHB_SCAN_SLAVE);
+ unsigned int freq = abus->freq;
+#ifndef CONFIG_SYS_GRLIB_SINGLE_BUS
+ unsigned int ioarea, ioarea_parent, bridge_pnp_ofs;
+ struct ambapp_find_ahb_info ahbinfo;
+ ambapp_ahbdev ahb;
+ int parent;
+
+ debug("ambapp_bus_freq: get freq on bus %d\n", ahb_bus_index);
+
+ while (ahb_bus_index != 0) {
+ debug(" BUS[0]: 0x%08x\n", abus->ioareas[0]);
+ debug(" BUS[1]: 0x%08x\n", abus->ioareas[1]);
+ debug(" BUS[2]: 0x%08x\n", abus->ioareas[2]);
+ debug(" BUS[3]: 0x%08x\n", abus->ioareas[3]);
+ debug(" BUS[4]: 0x%08x\n", abus->ioareas[4]);
+ debug(" BUS[5]: 0x%08x\n", abus->ioareas[5]);
+
+ /* Get I/O area of AHB bus */
+ ioarea = abus->ioareas[ahb_bus_index];
+
+ debug(" IOAREA: 0x%08x\n", ioarea);
+
+ /* Get parent bus */
+ parent = (ioarea & 0x7);
+ if (parent == 0) {
+ panic("%s: parent=0 indicates no parent! Stopping.\n",
+ __func__);
+ return -1;
+ }
+ parent = parent - 1;
+ bridge_pnp_ofs = ioarea & 0x7e0;
+
+ debug(" PARENT: %d\n", parent);
+ debug(" BRIDGE_OFS: 0x%08x\n", bridge_pnp_ofs);
+
+ /* Get AHB/AHB bridge PnP address */
+ ioarea_parent = (abus->ioareas[parent] & 0xfff00000) |
+ AMBA_CONF_AREA | AMBA_AHB_SLAVE_CONF_AREA;
+ ahbinfo.pnp = (struct ambapp_pnp_ahb *)
+ (ioarea_parent | bridge_pnp_ofs);
+
+ debug(" IOAREA PARENT: 0x%08x\n", ioarea_parent);
+ debug(" BRIDGE PNP: 0x%p\n", ahbinfo.pnp);
+
+ /* Parse the AHB information */
+ ahbinfo.ahb_bus_index = parent;
+ ambapp_ahb_parse(&ahbinfo, &ahb);
+
+ debug(" BRIDGE ID: VENDOR=%d(0x%x), DEVICE=%d(0x%x)\n",
+ ahb.vendor, ahb.vendor, ahb.device, ahb.device);
+
+ /* Different bridges may convert frequency differently */
+ if ((ahb.vendor == VENDOR_GAISLER) &&
+ ((ahb.device == GAISLER_AHB2AHB) ||
+ (ahb.device == GAISLER_L2CACHE))) {
+ /* Get new frequency */
+ if (ahb.ver > 1)
+ freq = gaisler_ahb2ahb_v2_freq(&ahb, freq);
+ else
+ freq = gaisler_ahb2ahb_v1_freq(&ahb, freq);
+
+ debug(" NEW FREQ: %dHz\n", freq);
+ } else {
+ panic("%s: unsupported AMBA bridge\n", __func__);
+ return -1;
+ }
+
+ /* Step upwards towards system top bus */
+ ahb_bus_index = parent;
+ }
+#endif
+
+ debug("ambapp_bus_freq: %dHz\n", freq);
+
+ return freq;
}
diff --git a/arch/sparc/cpu/leon3/ambapp_low.S b/arch/sparc/cpu/leon3/ambapp_low.S
new file mode 100644
index 0000000000..2863586dc1
--- /dev/null
+++ b/arch/sparc/cpu/leon3/ambapp_low.S
@@ -0,0 +1,784 @@
+/* GRLIB AMBA Plug&Play information scanning implemented without
+ * using memory (stack) and one register window. The code scan
+ * the PnP info and inserts the AHB bridges/buses into register
+ * i0-i5.
+ * The code support
+ * - up to 6 AHB buses
+ * - multiple APB buses
+ * - support for AHB2AHB & L2CACHE bridges
+ *
+ * (C) Copyright 2010, 2015
+ * Daniel Hellstrom, Cobham Gaisler, daniel@gaisler.com.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <ambapp.h>
+
+ .seg "text"
+ .globl _nomem_amba_init
+ .globl _nomem_ambapp_find_buses
+ .globl _nomem_find_apb
+ .globl _nomem_find_ahb
+
+/* Overview
+ * ========
+ *
+ * _nomem_amba_init - Init AMBA bus and calls _nomem_ambapp_find_buses
+ * _nomem_ambapp_find_buses - Scan AMBA PnP info for AHB buses/bridges and
+ * place them in i0-i5, see below
+ * _nomem_find_apb - Find one APB device identified by VENDOR:DEVICE
+ * ID and an index.
+ * _nomem_find_ahb - Find one AHB Master or Slave device identified
+ * by VENDOR:DEVICE ID and an index.
+ * init_ahb_bridges - Local function. Clears i0-i5
+ * insert_ahb_bridge - Local function. Insert a new AHB bus into first
+ * free register in i0-i5. It also checks that the
+ * bus has not already been added.
+ * get_ahb_bridge - Local function. Get AHB bus from registers,
+ * return register iN, where N is defined by o0.
+ *
+ * The _nomem_find_apb and _nomem_find_ahb function requires that i0-i5
+ * are populated with the AHB buses of the system. The registers are
+ * initialized by _nomem_ambapp_find_buses.
+ *
+ * AHB Bus result and requirements of i0-i5
+ * ========================================
+ *
+ * i0: AHB BUS0 IOAREA, no parent bus
+ * i1: AHB BUS1 IOAREA, parent bus is always i0 (AHB BUS0) and bridge address
+ * i2: AHB BUS2 IOAREA, 3-bit parent bus number and bridge address
+ * i3: AHB BUS3 IOAREA, 3-bit parent bus number and bridge address
+ * i4: AHB BUS4 IOAREA, 3-bit parent bus number and bridge address
+ * i5: AHB BUS5 IOAREA, 3-bit parent bus number and bridge address
+ *
+ * AHB BUS
+ * -------
+ * Bits 31-20 (0xfff00000) contain the found bus I/O Area (AHB PnP area).
+ *
+ * 3-bit Parent bus
+ * ----------------
+ * Bits 2-0 (0x00000007) contain parent bus number. Zero if no parent
+ * bus, 1 = parent is AHB BUS 0 (i0), 2 = parent is AHB BUS 1 (i1)..
+ *
+ * Bridge Address
+ * --------------
+ * Bits 10-5 (0x000007e0) contain the index of the Bridge's PnP
+ * information on the parent. Since all bridges are found in the
+ * PnP information they all have a PnP entry. Together with the
+ * parent bus number the PnP entry can be found:
+ * PnPEntry = (BRIDGE_ADDRESS + (iN & 0xfff00000)) | 0x000ff800
+ * where N is the parent bus minus one.
+ *
+ */
+
+/* Function initializes the AHB Bridge I/O AREA storage. (Clears i0-i5)
+ *
+ * Arguments
+ * none
+ *
+ * Results
+ * none
+ *
+ * Clobbered
+ * none
+ */
+
+init_ahb_bridges:
+ mov %g0, %i0
+ mov %g0, %i1
+ mov %g0, %i2
+ mov %g0, %i3
+ mov %g0, %i4
+ retl
+ mov %g0, %i5
+
+/* Function returns AHB Bridge I/O AREA for specified bus.
+ *
+ * Arguments
+ * - o0 = bus number
+ *
+ * Results
+ * - o0 = I/O AREA
+ *
+ * Clobbered
+ * none
+ */
+get_ahb_bridge:
+ cmp %o0, 1
+ be,a L1
+ mov %i0, %o0
+
+ cmp %o0, 2
+ be,a L1
+ mov %i1, %o0
+
+ cmp %o0, 3
+ be,a L1
+ mov %i2, %o0
+
+ cmp %o0, 4
+ be,a L1
+ mov %i3, %o0
+
+ cmp %o0, 5
+ be,a L1
+ mov %i4, %o0
+
+ cmp %o0, 6
+ be,a L1
+ mov %i5, %o0
+
+ /* o0 > 6: only 6 buses supported */
+ mov %g0, %o0
+L1:
+ retl
+ nop
+
+/* Function adds a AHB Bridge I/O AREA to the i0-i5 registers if
+ * not already added. It stores the bus PnP start information.
+ *
+ * Arguments
+ * - o0 = AHB Bridge I/O area
+ *
+ * Results
+ * none
+ *
+ * Clobbered
+ * o2, o3
+ */
+insert_ahb_bridge:
+ /* Check that bridge hasn't already been added */
+ andn %o0, 0x7ff, %o2
+ andn %i0, 0x7ff, %o3
+ cmp %o3, %o2
+ be L2
+ andn %i1, 0x7ff, %o3
+ cmp %o3, %o2
+ be L2
+ andn %i2, 0x7ff, %o3
+ cmp %o3, %o2
+ be L2
+ andn %i3, 0x7ff, %o3
+ cmp %o3, %o2
+ be L2
+ andn %i4, 0x7ff, %o3
+ cmp %o3, %o2
+ be L2
+ andn %i5, 0x7ff, %o3
+ cmp %o3, %o2
+ be L2
+
+ /* Insert into first free posistion */
+ cmp %i0, %g0
+ be,a L2
+ mov %o0, %i0
+
+ cmp %i1, %g0
+ be,a L2
+ mov %o0, %i1
+
+ cmp %i2, %g0
+ be,a L2
+ mov %o0, %i2
+
+ cmp %i3, %g0
+ be,a L2
+ mov %o0, %i3
+
+ cmp %i4, %g0
+ be,a L2
+ mov %o0, %i4
+
+ cmp %i5, %g0
+ be,a L2
+ mov %o0, %i5
+L2:
+ retl
+ nop
+
+/* FUNCTION int _nomem_find_ahb_bus(
+ * unsigned int bridge,
+ * int vendor_device,
+ * int index,
+ * void **pconf,
+ * int not_used,
+ * int option
+ * )
+ *
+ * Scans the AHB Master or Slave area for a matching VENDOR:DEVICE, the
+ * index is decremented when a matching device is found but index is
+ * greater than zero. When index is zero and a matching DEVICE:VENDOR
+ * is found the AHB configuration address and AHB I/O area is returned.
+ *
+ * i0-i7,l0,l1,l2,l3,l4,g2,o6 is not available for use.
+ * o1,o5 Must be left untouched
+ *
+ * Results
+ * - o0 Number of found devices (1 or 0)
+ * - o2 is decremented for each matching VENDOR:DEVICE found, zero if found
+ * - o3 Address of the AHB PnP configuration entry (Only valid if o0=1)
+ *
+ * Clobbered
+ * - o3 (Clobbered when no device was found)
+ * - o4 (Number of Devices left to search)
+ * - o0 (Bus ID, PnP ID, Device)
+ */
+_nomem_find_ahb_bus:
+
+ /* Get the number of Slaves/Masters.
+ * Only AHB Bus 0 has 64 AHB Masters/Slaves the
+ * other AHB buses has 16 slaves and 16 masters.
+ */
+ add %g0, 16, %o4 /* Defaulting to 16 */
+ andcc %o0, 0x7, %g0 /* 3-bit bus id */
+ be,a .L_maxloops_detected
+ add %g0, 64, %o4 /* AHB Bus 0 has 64 AHB Masters/Slaves */
+.L_maxloops_detected:
+
+ /* Get start address of AHB Slave or AHB Master area depending on what
+ * we are searching for.
+ */
+ andn %o0, 0x7ff, %o0 /* Remove Bus ID and 5-bit AHB/AHB
+ * Bridge PnP Address to get I/O Area */
+ set AMBA_CONF_AREA, %o3
+ or %o3, %o0, %o3 /* Master area address */
+
+ cmp %o5, DEV_AHB_SLV
+ be,a .L_conf_area_calculated
+ or %o3, AMBA_AHB_SLAVE_CONF_AREA, %o3 /* Add 0x800 to get to slave area */
+.L_conf_area_calculated:
+
+ /* Iterate over all AHB device and try to find matching DEVICE:VENDOR
+ * o1 - VENDOR|DEVICE
+ * o2 - Index
+ * o3 - Current AHB Device Configuration address
+ * o5 - Type (leave untouched)
+ *
+ * o4 - Number of AHB device left to process
+ * o0 - tmp
+ */
+.L_process_one_conf:
+ ld [%o3], %o0
+ andn %o0, 0xfff, %o0
+ cmp %o0, 0 /* No device if zero */
+ beq .L_next_conf
+ cmp %o1, 0 /* If VENDOR:DEVICE==0, consider all matching */
+ beq .L_process_ahb_dev_found
+ cmp %o0, %o1 /* Does VENDOR and DEVICE Match? */
+ bne .L_next_conf
+ nop
+.L_process_ahb_dev_found:
+ /* Found a Matching VENDOR:DEVICE, index must also match */
+ cmp %o2, %g0
+ bne .L_next_conf
+ dec %o2
+ /* Index matches also, return happy with o3 set to AHB Conf Address */
+ mov %g0, %o2
+ retl
+ add %g0, 1, %o0
+
+.L_next_conf:
+ subcc %o4, 1, %o4 /* One device has been processed,
+ * Are there more devices to process? */
+ bne .L_process_one_conf
+ add %o3, AMBA_AHB_CONF_LENGH, %o3 /* Next Configuration entry */
+ /* No Matching device found */
+ retl
+ mov %g0, %o0
+
+/* FUNCTION int _nomem_find_ahb(
+ * int unused,
+ * int vendor_device,
+ * int index,
+ * void **pconf,
+ * int *ahb_bus_index,
+ * int option,
+ * )
+ *
+ * Find a AHB Master or AHB Slave device, it puts the address of the AHB PnP
+ * configuration in o3 (pconf), the I/O Area base address in o4 (pioarea).
+ *
+ * Calls _nomem_find_ahb_bus for every AHB bus.
+ *
+ * i0-i7, l0, l1, o6, g1, g4-g7 is not available for use.
+ *
+ * Arguments
+ * - o0 Unused
+ *
+ * Results
+ * - o0 Number of found devices (1 or 0)
+ * - o2 Decremented Index (Zero if found)
+ * - o3 Address of the AHB PnP configuration entry
+ * - o4 AHB Bus index the device was found on (if o0=1)
+ * - o5 Left untouched
+ *
+ * Clobbered
+ * - o0 (AHB Bridge and used by _nomem_find_ahb_bus)
+ * - o2 (index is decremented)
+ * - l2 (Current AHB Bus index)
+ * - g2 (return address)
+ */
+_nomem_find_ahb:
+ mov %o7, %g2 /* Save return address */
+ /* Scan all AHB Buses found for the AHB Master/Slave matching VENDOR:DEVICE */
+ clr %l2
+.L_search_next_ahb_bus:
+ add %l2, 1, %l2
+ call get_ahb_bridge /* Get bus %l0 I/O Area */
+ mov %l2, %o0
+ cmp %o0, %g0
+ be .L_no_device_found /* If no more AHB bus is left to be scanned, proceed */
+ nop
+ call _nomem_find_ahb_bus /* Scan AHB bus %o0 for VENDOR:DEVICE. Index in o3 is decremented */
+ nop
+ cmp %o0, %g0 /* If VENDOR:DEVICE was not found scan next AHB Bus */
+ be .L_search_next_ahb_bus /* Do next bus is o0=0 (not found) */
+ nop
+ /* The device was found, o0 is 1 */
+ mov %g2, %o7 /* Restore return address */
+ retl
+ mov %l2, %o4 /* The AHB bus index the device was found on */
+
+ /* No device found matching */
+.L_no_device_found:
+ mov %g2, %o7 /* Restore return address */
+ retl
+ mov %g0, %o0
+
+
+/* FUNCTION int _nomem_find_apb_bus(
+ * int apbmst,
+ * int vendor_device,
+ * int index,
+ * void **pconf
+ * )
+ *
+ * Find a APB Slave device, it puts the address of the APB PnP configuration
+ * in o3 (pconf).
+ *
+ * Calls _nomem_find_ahb_bus for every AHB bus searching for AHB/APB Bridges.
+ * The AHB/APB bridges are AHB Slaves with ID GAISLER_APBMST.
+ *
+ * Results
+ * - o0 Number of found devices (1 or 0)
+ * - o2 Decremented Index
+ * - o3 Address of the found APB device PnP configuration entry
+ *
+ * Clobbered
+ * - o5 PnP VENDOR:DEVICE ID
+ */
+
+_nomem_find_apb_bus:
+ set AMBA_CONF_AREA, %o3
+ or %o0, %o3, %o3 /* Calc start of APB device PnP info */
+ add %g0, 16, %o0 /* o0, number of APB Slaves left to scan */
+.L_process_one_apb_conf:
+ ld [%o3], %o5
+ andn %o5, 0xfff, %o5
+ cmp %o5, 0 /* No device if zero */
+ beq .L_process_apb_dev_not_found
+ cmp %o1, 0 /* If VENDOR:DEVICE == -1, consider all matching */
+ beq .L_process_apb_dev_found
+ cmp %o1, %o5 /* Found VENDOR:DEVICE */
+ bne .L_process_apb_dev_not_found
+ nop
+
+.L_process_apb_dev_found:
+ /* Found matching device, compare index */
+ cmp %o2, %g0
+ bne .L_process_apb_dev_not_found
+ dec %o2
+ /* Matching index and VENDOR:DEVICE */
+ retl
+ add %g0, 1, %o0
+
+.L_process_apb_dev_not_found:
+ subcc %o0, 1, %o0
+ bne .L_process_one_apb_conf
+ add %o3, 8, %o3
+ retl
+ mov %g0, %o0
+
+/* FUNCTION int _nomem_find_apb(
+ * int unused,
+ * int vendor_device,
+ * int index,
+ * void **pconf,
+ * int *ahb_bus_index
+ * )
+ *
+ * Find a APB Slave device, it puts the address of the APB PnP configuration
+ * in o3 (pconf), the APB Master I/O Area base address in o4 (papbarea).
+ *
+ * Calls _nomem_find_ahb_bus for every AHB bus searching for AHB/APB Bridges.
+ * The AHB/APB bridges are AHB Slaves with ID GAISLER_APBMST.
+ *
+ * i0-i7, l0, l1, o6 is not available for use.
+ *
+ * Arguments
+ * - o0 Unused
+ *
+ * Results
+ * - o0 Number of found devices (1 or 0)
+ * - o2 Decremented Index if not found
+ * - o3 Address of the APB PnP configuration entry
+ * - o4 AHB Bus index of APB Bridge/APB Device
+ *
+ * Clobbered
+ * - o0 (AHB Bridge)
+ * - o2 (index is decremented)
+ * - l2 (APB DEV Index [7..4] : APBMST AHB Index [3..0])
+ * - l3 (Current AHB Bus index)
+ * - l4 (temporary storage for APB VENDOR:DEVICE)
+ * - o5 (AHB Slave ID)
+ * - o0 (clobbered by _nomem_find_ahb_bus)
+ * - g2 (Return address)
+ */
+_nomem_find_apb:
+ /* Scan all AHB Buses found for AHB/APB Bridges */
+ mov %o7, %g2 /* Save return address */
+ mov %o1, %l4 /* Save APB VENDOR:DEVICE */
+ sll %o2, 4, %l2 /* APB MST index = 0 */
+ add %g0, 1, %l3 /* AHB Bus index = 0 */
+.L2_search_next_ahb_bus:
+ call get_ahb_bridge /* Get bus %l3 I/O Area */
+ mov %l3, %o0
+ cmp %o0, %g0
+ be .L2_no_device_found /* If no more AHB bus is left to be scanned, proceed */
+ add %g0, DEV_AHB_SLV, %o5 /* Search for AHB Slave */
+ sethi %hi(AMBA_PNP_ID(VENDOR_GAISLER, GAISLER_APBMST)), %o1
+ call _nomem_find_ahb_bus /* Scan AHB bus %o0 for VENDOR:DEVICE. Index in o3 is decremented */
+ and %l2, 0xf, %o2 /* Set APBMST index */
+ cmp %o0, %g0 /* If no AHB/APB Bridge was not found, scan next AHB Bus */
+ be .L_no_apb_bridge_found /* Do next bus */
+ nop
+
+ /* The AHB/APB Bridge was found.
+ * Search for the requested APB Device on the APB bus using
+ * find_apb_bus, it will decrement the index.
+ */
+ ld [%o3 + AMBA_AHB_MBAR0_OFS], %o3
+ sll %o3, 16, %o0
+ and %o0, %o3, %o0 /* Address AND Address Mask */
+ sethi %hi(0xfff00000), %o3
+ and %o0, %o3, %o0 /* AHB/APB Bridge address */
+
+ srl %l2, 4, %o2 /* APB DEV Index */
+ call _nomem_find_apb_bus
+ mov %l4, %o1 /* APB VENDOR:DEVICE */
+ cmp %o0, %g0
+ be .L_apb_dev_not_found
+ mov %g2, %o7 /* Restore return address */
+ /* APB Device found
+ * o0 1
+ * o2 Index is decremented to zero
+ * o3 APB configuration address,
+ * o4 APB Bridge Configuration address.
+ */
+ mov %g0, %o2
+ retl
+ mov %l3, %o4
+
+.L_apb_dev_not_found:
+ /* Update APB DEV Index by saving output from find_apb_bus
+ * (index parameter) into bits [31..4] in L2.
+ */
+ sll %o2, 4, %o2
+ and %l2, 0xf, %l2
+ or %o2, %l2, %l2
+ /* Try finding the next AHB/APB Bridge on the same AHB bus
+ * to find more APB devices
+ */
+ ba .L2_search_next_ahb_bus /* Find next AHB/APB bridge */
+ inc %l2
+
+.L_no_apb_bridge_found:
+ inc %l3 /* Next AHB Bus */
+ ba .L2_search_next_ahb_bus /* Process next AHB bus */
+ andn %l2, 0xf, %l2 /* Start at APB Bridge index 0 at every AHB Bus */
+ /* No device found matching */
+.L2_no_device_found:
+ mov %g2, %o7 /* Restore return address */
+ srl %l2, 4, %o2 /* APB DEV Index */
+ retl
+ mov %g0, %o0
+
+
+
+/* FUNCTION _nomem_amba_scan_gaisler_ahb2ahb_bridge(unsigned int bridge, int bus)
+ *
+ * Constraints:
+ * - o1 may not be used
+ * - o0, o2, o3 may be used.
+ *
+ * Arguments
+ * - o0 PnP Address of Bridge AHB device
+ * - o2 PnP ID of AHB device
+ *
+ * Results
+ * - o0 Address of new bus PnP area or a 1 if AHB device is no bridge
+ *
+ * Clobbered
+ * - o0, o2
+ *
+ */
+_nomem_amba_scan_gaisler_ahb2ahb_bridge:
+ andn %o2, 0xfff, %o2
+ sethi %hi(AMBA_PNP_ID(VENDOR_GAISLER,GAISLER_AHB2AHB)), %o3
+ cmp %o2, %o3
+ beq .L_is_ahb2ahb_bridge
+ nop
+
+ retl
+ add %g0, 1, %o0
+
+.L_is_ahb2ahb_bridge:
+ /* Found a GAISLER AHB2AHB bridge */
+ retl
+ ld [%o0 + AMBA_AHB_CUSTOM1_OFS], %o0 /* Get address of bridge PnP area */
+
+
+/* FUNCTION _nomem_amba_scan_gaisler_l2cache_bridge(unsigned int bridge, int bus)
+ *
+ * Constraints:
+ * - o1 may not be used
+ * - o0, o2, o3 may be used.
+ *
+ * Arguments
+ * - o0 PnP Address of Bridge AHB device
+ * - o2 PnP ID of AHB device
+ *
+ * Results
+ * - o0 Address of new bus PnP area or a 1 if AHB device is no bridge
+ *
+ * Clobbered
+ * - o0, o2
+ *
+ */
+_nomem_amba_scan_gaisler_l2cache_bridge:
+ andn %o2, 0xfff, %o2
+ sethi %hi(AMBA_PNP_ID(VENDOR_GAISLER,GAISLER_L2CACHE)), %o3
+ cmp %o2, %o3
+ beq .L_is_l2cache_bridge
+ nop
+
+ retl
+ add %g0, 1, %o0
+
+.L_is_l2cache_bridge:
+ /* Found a GAISLER l2cache bridge */
+ retl
+ ld [%o0 + AMBA_AHB_CUSTOM1_OFS], %o0 /* Get address of bridge PnP area */
+
+
+/* FUNCTION _nomem_amba_scan(unsigned int bridge, int bus)
+ *
+ * Constraints:
+ * i0-i7, l0 is used by caller
+ * o5-o7 may not be used.
+ *
+ * Arguments
+ * - o0 Bridge Information: I/O AREA and parent bus
+ * - o1 Bus
+ *
+ * Results
+ * - o0 Number of AHB bridges found
+ *
+ * Clobbered
+ * - o0 (Current AHB slave conf address)
+ * - o2 (Used by insert_bridge)
+ * - o3 (Used by insert_bridge)
+ * - l1 (Number of AHB Slaves left to process)
+ * - l2 (Current AHB slave conf address)
+ * - g2 (Return address)
+ */
+_nomem_amba_scan:
+ mov %o7, %g2 /* Save return address */
+ set 16, %l1
+ cmp %o1, 1
+ be,a .L2_maxloops_detected
+ add %g0, 64, %l1
+.L2_maxloops_detected:
+
+ /* Clear 3-bit parent bus from bridge to get I/O AREA, then or
+ * (AMBA_CONF_AREA | AMBA_AHB_SLAVE_CONF_AREA) to get first AHB slave
+ * conf address.
+ */
+ andn %o0, 0x7ff, %o0
+ set (AMBA_CONF_AREA | AMBA_AHB_SLAVE_CONF_AREA), %l2
+ or %o0, %l2, %l2
+
+ /* Scan AHB Slave area for AHB<->AHB bridges. For each AHB device
+ * all "bridge drivers" are called, the driver function interface:
+ *
+ * Input:
+ * - o0 PnP Address of Bridge AHB device
+ * - o2 PnP ID of AHB device
+ * Return values:
+ * - o0 Address of new bus PnP area, returning a 1 in o2 means not found
+ *
+ * Constraints:
+ * - o1 may not be used
+ * - o0, o2, o3 may be used.
+ *
+ */
+.L_scan_one_ahb_slave:
+ ld [%l2], %o2
+
+ cmp %o2, %g0
+ beq .L_scan_next_ahb_slave
+ nop
+
+ /* Call the GAISLER AHB2AHB bridge driver */
+ call _nomem_amba_scan_gaisler_ahb2ahb_bridge
+ mov %l2, %o0
+ cmp %o0, 1
+ bne .L_found_bridge
+ ld [%l2], %o2
+
+ /* Call the GAISLER L2CACHE bridge driver */
+ call _nomem_amba_scan_gaisler_l2cache_bridge
+ mov %l2, %o0
+ cmp %o0, 1
+ bne .L_found_bridge
+ ld [%l2], %o2
+
+ /* Insert next bridge "driver" function here */
+
+
+ /* The PnP ID did not match a bridge - a new bus was not found ==>
+ * step to next AHB device */
+ ba .L_scan_next_ahb_slave
+ nop
+
+ /* Add Found bus */
+.L_found_bridge:
+ and %l2, 0x7e0, %o2
+ or %o2, %o0, %o0 /* Add AHB/AHB Bridge PnP address */
+ call insert_ahb_bridge /* Insert Bridge into found buses storage */
+ or %o1, %o0, %o0 /* Add parent bus LSB 3-bits */
+
+.L_scan_next_ahb_slave:
+ /* More Slaves to process? */
+ subcc %l1, 1, %l1
+ bne .L_scan_one_ahb_slave
+ add %l2, AMBA_AHB_CONF_LENGH, %l2
+
+ /* No more AHB devices to process */
+ mov %g2, %o7 /* Restore return address */
+ retl
+ nop
+
+/* FUNCTION _nomem_ambapp_find_buses(unsigned int ioarea)
+ *
+ * Find AMBA AHB buses.
+ *
+ * Constraints:
+ * i6-i7, l7 is used by caller
+ *
+ * Arguments
+ * - o0 Bridge Information: I/O AREA and parent bus
+ *
+ * Results
+ * - o0 Number of AHB bridges found
+ * - i0-i5 initialized
+ *
+ * Clobbered
+ * - o0 (Current AHB slave conf address)
+ * - o2 (Used by insert_bridge)
+ * - o3 (Used by insert_bridge)
+ * - l0 (Current AHB Bus)
+ * - l1 (Used by nomem_amba_scan)
+ * - l2 (Used by nomem_amba_scan)
+ * - l3 (Used by nomem_amba_scan)
+ * - l4 (Used by nomem_amba_scan)
+ *
+ * - g1 (level 1 return address)
+ * - g2 (Used by nomem_amba_scan)
+ */
+_nomem_ambapp_find_buses:
+ mov %o7, %g1 /* Save return address */
+
+ /* Initialize AHB Bus storage */
+ call init_ahb_bridges
+ nop
+
+ /* Insert AHB Bus 0 */
+ call insert_ahb_bridge
+ nop /* Argument already prepared by caller */
+
+ /* Scan AHB Bus 0 for AHB Bridges */
+ call _nomem_amba_scan
+ add %g0, 1, %o1
+
+ /* Scan all AHB Buses found for more AHB Bridges */
+ add %g0, 2, %l0
+.L100_search_next_ahb_bus:
+ call get_ahb_bridge /* Get bus %l0 I/O Area */
+ mov %l0, %o0
+ cmp %o0, %g0
+ be .L100_return /* If no more AHB bus is left to be scanned, proceed */
+ nop
+ call _nomem_amba_scan /* Scan bus %l0 for AHB Bridges. i0-i7,l0 is used */
+ mov %l0, %o1 /* I/O AREA untouched in o0 */
+ ba .L100_search_next_ahb_bus /* Do next bus */
+ add %l0, 1, %l0
+
+.L100_return:
+ mov %g1, %o7
+ retl
+ nop
+
+
+/* FUNCTION _nomem_amba_init(unsigned int ioarea)
+ *
+ * Find all AHB buses
+ *
+ * Constraints:
+ * i6, i7, o6, o7, l7, l6, g3, g4, g5, g6, g7 is used by caller
+ *
+ * Arguments
+ * - o0 Bridge Information: I/O AREA and parent bus
+ *
+ * Results
+ * - o0 Number of AHB bridges found
+ *
+ * Clobbered
+ * - l0, l1, l2, l3, l4, g1, g2 (used by _nomem_ambapp_find_buses)
+ * - o0, o1, o2, o3 (Used as arguments)
+ * - o5 (return address)
+ * - g1 (level 1 return address)
+ * - g2 (level 2 return address)
+ */
+_nomem_amba_init:
+ mov %o7, %o5 /* Save return address, o5 not used */
+
+ /* Scan for buses, it will init i0-i5 */
+ call _nomem_ambapp_find_buses
+ nop
+
+ mov %o5, %o7
+ retl
+ nop
+
+/* Call tree and their return address register
+ *
+ *_nomem_amba_scan (g1)
+ * -> init_ahb_bridges (o7)
+ * -> insert_ahb_bridge (o7)
+ * -> _nomem_amba_scan (g2)
+ * -> insert_ahb_bridge (o7)
+ * -> get_ahb_bridge (o7)
+ *
+ *
+ * -> _nomem_find_apb (g2)
+ * -> get_ahb_bridge (o7)
+ * -> _nomem_find_ahb_bus (o7)
+ * -> _nomem_find_apb_bus (o7)
+ * -> _nomem_find_ahb (g2)
+ * -> get_ahb_bridge (o7)
+ * -> _nomem_find_ahb_bus (o7)
+ * -> mem_handler.func() (o7)
+ *
+ */
diff --git a/arch/sparc/cpu/leon3/ambapp_low_c.S b/arch/sparc/cpu/leon3/ambapp_low_c.S
new file mode 100644
index 0000000000..42288fac59
--- /dev/null
+++ b/arch/sparc/cpu/leon3/ambapp_low_c.S
@@ -0,0 +1,113 @@
+/* C-interface for AMBA PnP scanning functions implemented in
+ * ambapp_low.S. At the point the memory and stack can be
+ * used.
+ *
+ * (C) Copyright 2010, 2015
+ * Daniel Hellstrom, Cobham Gaisler, daniel@gaisler.com.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+
+ .seg "text"
+ .extern _nomem_ambapp_find_buses
+ .extern _nomem_find_apb
+ .extern _nomem_find_ahb
+
+ .globl ambapp_find_buses
+ .globl ambapp_find_apb
+ .globl ambapp_find_ahb
+
+
+/* C-interface for _nomem_ambapp_find_buses used when memory is available.
+ */
+ambapp_find_buses:
+ save %sp, -104, %sp
+ mov %i1, %l7 /* Save second argument */
+ call _nomem_ambapp_find_buses
+ mov %i0, %o0
+
+ /* Store result */
+ st %g0, [%l7+0x00]
+ st %i0, [%l7+0x04]
+ st %i1, [%l7+0x08]
+ st %i2, [%l7+0x0c]
+ st %i3, [%l7+0x10]
+ st %i4, [%l7+0x14]
+ st %i5, [%l7+0x18]
+
+ ret
+ restore
+
+/* C-interface for _nomem_find_apb used when memory is available.
+ *
+ * void ambapp_find_apb(
+ * struct ambapp_bus *abus,
+ * unsigned int dev_vend,
+ * int index,
+ * struct ambapp_find_apb_info *result
+ * );
+ *
+ */
+ambapp_find_apb:
+ save %sp, -104, %sp
+
+ mov %i3, %l7 /* Save second argument */
+ mov %i1, %o1
+ mov %i2, %o2
+
+ /* Initialize buses available in system */
+ ld [%i0+0x08], %i1
+ ld [%i0+0x0c], %i2
+ ld [%i0+0x10], %i3
+ ld [%i0+0x14], %i4
+ ld [%i0+0x18], %i5
+
+ call _nomem_find_apb
+ ld [%i0+0x04], %i0
+
+ st %o2, [%l7+0x08] /* Decremented Index */
+ st %o3, [%l7] /* PnP configuration address of APB Device */
+ st %o4, [%l7+0x04] /* AHB Bus Index of AHB/APB bridge and APB Device */
+ mov %o0, %i0
+ ret
+ restore
+
+/* C-interface for _nomem_find_ahb used when memory is available.
+ *
+ * void ambapp_find_ahb(
+ * struct ambapp_bus *abus,
+ * unsigned int dev_vend,
+ * int index,
+ * int type,
+ * struct ambapp_find_ahb_info *result
+ * );
+ *
+ */
+ambapp_find_ahb:
+ save %sp, -104, %sp
+
+ mov %i4, %l7 /* Save second argument */
+ clr %o0
+ mov %i1, %o1
+ mov %i2, %o2
+ clr %o3
+ clr %o4
+ mov %i3, %o5
+
+ /* Initialize buses available in system */
+ ld [%i0+0x08], %i1
+ ld [%i0+0x0c], %i2
+ ld [%i0+0x10], %i3
+ ld [%i0+0x14], %i4
+ ld [%i0+0x18], %i5
+
+ call _nomem_find_ahb
+ ld [%i0+0x04], %i0
+
+ st %o2, [%l7+0x08] /* Decremented Index */
+ st %o3, [%l7] /* PnP configuration address of AHB Device */
+ st %o4, [%l7+0x04] /* AHB Bus Index of AHB Device */
+ mov %o0, %i0
+ ret
+ restore
diff --git a/arch/sparc/cpu/leon3/cpu_init.c b/arch/sparc/cpu/leon3/cpu_init.c
index 2f41d8847b..b140da31b1 100644
--- a/arch/sparc/cpu/leon3/cpu_init.c
+++ b/arch/sparc/cpu/leon3/cpu_init.c
@@ -1,8 +1,8 @@
/* Initializes CPU and basic hardware such as memory
* controllers, IRQ controller and system timer 0.
*
- * (C) Copyright 2007
- * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com
+ * (C) Copyright 2007, 2015
+ * Daniel Hellstrom, Cobham Gaisler, daniel@gaisler.com
*
* SPDX-License-Identifier: GPL-2.0+
*/
@@ -11,9 +11,17 @@
#include <asm/asi.h>
#include <asm/leon.h>
#include <ambapp.h>
+#include <grlib/irqmp.h>
+#include <grlib/gptimer.h>
+#include <debug_uart.h>
#include <config.h>
+/* Default Plug&Play I/O area */
+#ifndef CONFIG_AMBAPP_IOAREA
+#define CONFIG_AMBAPP_IOAREA AMBA_DEFAULT_IOAREA
+#endif
+
#define TIMER_BASE_CLK 1000000
#define US_PER_TICK (1000000 / CONFIG_SYS_HZ)
@@ -22,11 +30,7 @@ DECLARE_GLOBAL_DATA_PTR;
/* reset CPU (jump to 0, without reset) */
void start(void);
-/* find & initialize the memory controller */
-int init_memory_ctrl(void);
-
ambapp_dev_irqmp *irqmp = NULL;
-ambapp_dev_mctrl memctrl;
ambapp_dev_gptimer *gptimer = NULL;
unsigned int gptimer_irq = 0;
int leon3_snooping_avail = 0;
@@ -39,64 +43,32 @@ struct {
/*
* Breath some life into the CPU...
*
- * Set up the memory map,
- * initialize a bunch of registers.
- *
* Run from FLASH/PROM:
* - until memory controller is set up, only registers available
+ * - memory controller has already been setup up, stack can be used
* - no global variables available for writing
* - constants available
*/
-
void cpu_init_f(void)
{
- /* these varaiable must not be initialized */
- ambapp_dev_irqmp *irqmp;
- ambapp_apbdev apbdev;
- register unsigned int apbmst;
-
- /* find AMBA APB Master */
- apbmst = (unsigned int)
- ambapp_ahb_next_nomem(VENDOR_GAISLER, GAISLER_APBMST, 1, 0);
- if (!apbmst) {
- /*
- * no AHB/APB bridge, something is wrong
- * ==> jump to start (or hang)
- */
- while (1) ;
- }
- /* Init memory controller */
- if (init_memory_ctrl()) {
- while (1) ;
- }
-
- /****************************************************
- * From here we can use the main memory and the stack.
- */
-
- /* Find AMBA APB IRQMP Controller */
- if (ambapp_apb_first(VENDOR_GAISLER, GAISLER_IRQMP, &apbdev) != 1) {
- /* no IRQ controller, something is wrong
- * ==> jump to start (or hang)
- */
- while (1) ;
- }
- irqmp = (ambapp_dev_irqmp *) apbdev.address;
-
- /* initialize the IRQMP */
- irqmp->ilevel = 0xf; /* all IRQ off */
- irqmp->iforce = 0;
- irqmp->ipend = 0;
- irqmp->iclear = 0xfffe; /* clear all old pending interrupts */
- irqmp->cpu_mask[0] = 0; /* mask all IRQs on CPU 0 */
- irqmp->cpu_force[0] = 0; /* no force IRQ on CPU 0 */
-
- /* cache */
+#ifdef CONFIG_DEBUG_UART
+ debug_uart_init();
+#endif
}
+/* Routine called from start.S,
+ *
+ * Run from FLASH/PROM:
+ * - memory controller has already been setup up, stack can be used
+ * - global variables available for read/writing
+ * - constants avaiable
+ */
void cpu_init_f2(void)
{
-
+ /* Initialize the AMBA Plug & Play bus structure, the bus
+ * structure represents the AMBA bus that the CPU is located at.
+ */
+ ambapp_bus_init(CONFIG_AMBAPP_IOAREA, CONFIG_SYS_CLK_FREQ, &ambapp_plb);
}
/*
@@ -105,95 +77,58 @@ void cpu_init_f2(void)
int cpu_init_r(void)
{
ambapp_apbdev apbdev;
+ int index, cpu;
+ ambapp_dev_gptimer *timer = NULL;
+ unsigned int bus_freq;
/*
* Find AMBA APB IRQMP Controller,
- * When we come so far we know there is a IRQMP available
*/
- ambapp_apb_first(VENDOR_GAISLER, GAISLER_IRQMP, &apbdev);
- irqmp = (ambapp_dev_irqmp *) apbdev.address;
-
- /* timer */
- if (ambapp_apb_first(VENDOR_GAISLER, GAISLER_GPTIMER, &apbdev) != 1) {
- printf("cpu_init_r: gptimer not found!\n");
- return 1;
- }
- gptimer = (ambapp_dev_gptimer *) apbdev.address;
- gptimer_irq = apbdev.irq;
-
- /* initialize prescaler common to all timers to 1MHz */
- gptimer->scalar = gptimer->scalar_reload =
- (((CONFIG_SYS_CLK_FREQ / 1000) + 500) / 1000) - 1;
-
- return (0);
-}
-
-/* find & setup memory controller */
-int init_memory_ctrl()
-{
- register ambapp_dev_mctrl *mctrl;
- register ambapp_dev_sdctrl *sdctrl;
- register ambapp_dev_ddrspa *ddrspa;
- register ambapp_dev_ddr2spa *ddr2spa;
- register ahbctrl_pp_dev *ahb;
- register unsigned int base;
- register int not_found_mctrl = -1;
-
- /* find ESA Memory controller */
- base = ambapp_apb_next_nomem(VENDOR_ESA, ESA_MCTRL, 0);
- if (base) {
- mctrl = (ambapp_dev_mctrl *) base;
-
- /* config MCTRL memory controller */
- mctrl->mcfg1 = CONFIG_SYS_GRLIB_MEMCFG1 | (mctrl->mcfg1 & 0x300);
- mctrl->mcfg2 = CONFIG_SYS_GRLIB_MEMCFG2;
- mctrl->mcfg3 = CONFIG_SYS_GRLIB_MEMCFG3;
- not_found_mctrl = 0;
+ if (ambapp_apb_find(&ambapp_plb, VENDOR_GAISLER,
+ GAISLER_IRQMP, 0, &apbdev) != 1) {
+ panic("%s: IRQ controller not found\n", __func__);
+ return -1;
}
+ irqmp = (ambapp_dev_irqmp *)apbdev.address;
- /* find Gaisler Fault Tolerant Memory controller */
- base = ambapp_apb_next_nomem(VENDOR_GAISLER, GAISLER_FTMCTRL, 0);
- if (base) {
- mctrl = (ambapp_dev_mctrl *) base;
-
- /* config MCTRL memory controller */
- mctrl->mcfg1 = CONFIG_SYS_GRLIB_FT_MEMCFG1 | (mctrl->mcfg1 & 0x300);
- mctrl->mcfg2 = CONFIG_SYS_GRLIB_FT_MEMCFG2;
- mctrl->mcfg3 = CONFIG_SYS_GRLIB_FT_MEMCFG3;
- not_found_mctrl = 0;
+ /* initialize the IRQMP */
+ irqmp->ilevel = 0xf; /* all IRQ off */
+ irqmp->iforce = 0;
+ irqmp->ipend = 0;
+ irqmp->iclear = 0xfffe; /* clear all old pending interrupts */
+ for (cpu = 0; cpu < 16; cpu++) {
+ /* mask and clear force for all IRQs on CPU[N] */
+ irqmp->cpu_mask[cpu] = 0;
+ irqmp->cpu_force[cpu] = 0;
}
- /* find SDRAM controller */
- base = ambapp_apb_next_nomem(VENDOR_GAISLER, GAISLER_SDCTRL, 0);
- if (base) {
- sdctrl = (ambapp_dev_sdctrl *) base;
-
- /* config memory controller */
- sdctrl->sdcfg = CONFIG_SYS_GRLIB_SDRAM;
- not_found_mctrl = 0;
- }
+ /* timer */
+ index = 0;
+ while (ambapp_apb_find(&ambapp_plb, VENDOR_GAISLER, GAISLER_GPTIMER,
+ index, &apbdev) == 1) {
+ timer = (ambapp_dev_gptimer *)apbdev.address;
+ if (gptimer == NULL) {
+ gptimer = timer;
+ gptimer_irq = apbdev.irq;
+ }
+
+ /* Different buses may have different frequency, the
+ * frequency of the bus tell in which frequency the timer
+ * prescaler operates.
+ */
+ bus_freq = ambapp_bus_freq(&ambapp_plb, apbdev.ahb_bus_index);
- ahb = ambapp_ahb_next_nomem(VENDOR_GAISLER, GAISLER_DDR2SPA, 1, 0);
- if (ahb) {
- ddr2spa = (ambapp_dev_ddr2spa *) ambapp_ahb_get_info(ahb, 1);
+ /* initialize prescaler common to all timers to 1MHz */
+ timer->scalar = timer->scalar_reload =
+ (((bus_freq / 1000) + 500) / 1000) - 1;
- /* Config DDR2 memory controller */
- ddr2spa->cfg1 = CONFIG_SYS_GRLIB_DDR2_CFG1;
- ddr2spa->cfg3 = CONFIG_SYS_GRLIB_DDR2_CFG3;
- not_found_mctrl = 0;
+ index++;
}
-
- ahb = ambapp_ahb_next_nomem(VENDOR_GAISLER, GAISLER_DDRSPA, 1, 0);
- if (ahb) {
- ddrspa = (ambapp_dev_ddrspa *) ambapp_ahb_get_info(ahb, 1);
-
- /* Config DDR memory controller */
- ddrspa->ctrl = CONFIG_SYS_GRLIB_DDR_CFG;
- not_found_mctrl = 0;
+ if (!gptimer) {
+ printf("%s: gptimer not found!\n", __func__);
+ return 1;
}
-
- /* failed to find any memory controller */
- return not_found_mctrl;
+ return 0;
}
/* Uses Timer 0 to get accurate
@@ -216,8 +151,8 @@ int timer_interrupt_init_cpu(void)
gptimer->e[0].val = 0;
gptimer->e[0].rld = (TIMER_BASE_CLK / CONFIG_SYS_HZ) - 1;
gptimer->e[0].ctrl =
- (LEON3_GPTIMER_EN |
- LEON3_GPTIMER_RL | LEON3_GPTIMER_LD | LEON3_GPTIMER_IRQEN);
+ (GPTIMER_CTRL_EN | GPTIMER_CTRL_RS |
+ GPTIMER_CTRL_LD | GPTIMER_CTRL_IE);
return gptimer_irq;
}
diff --git a/arch/sparc/cpu/leon3/interrupts.c b/arch/sparc/cpu/leon3/interrupts.c
index a834aa024b..2312b58d29 100644
--- a/arch/sparc/cpu/leon3/interrupts.c
+++ b/arch/sparc/cpu/leon3/interrupts.c
@@ -23,6 +23,8 @@
#include <asm/leon.h>
#include <ambapp.h>
+#include <grlib/irqmp.h>
+#include <grlib/gptimer.h>
/* 15 normal irqs and a non maskable interrupt */
#define NR_IRQS 15
@@ -125,9 +127,8 @@ int interrupt_init_cpu(void)
/* Handle Timer 0 IRQ */
void timer_interrupt_cpu(void *arg)
{
- gptimer->e[0].ctrl = (LEON3_GPTIMER_EN |
- LEON3_GPTIMER_RL |
- LEON3_GPTIMER_LD | LEON3_GPTIMER_IRQEN);
+ gptimer->e[0].ctrl = (GPTIMER_CTRL_EN | GPTIMER_CTRL_RS |
+ GPTIMER_CTRL_LD | GPTIMER_CTRL_IE);
/* nothing to do here */
return;
}
diff --git a/arch/sparc/cpu/leon3/memcfg.c b/arch/sparc/cpu/leon3/memcfg.c
new file mode 100644
index 0000000000..b9eda440e2
--- /dev/null
+++ b/arch/sparc/cpu/leon3/memcfg.c
@@ -0,0 +1,237 @@
+/* GRLIB Memory controller setup. The register values are used
+ * from the associated low level assembler routine implemented
+ * in memcfg_low.S.
+ *
+ * (C) Copyright 2010, 2015
+ * Daniel Hellstrom, Cobham Gaisler, daniel@gaisler.com.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <ambapp.h>
+#include "memcfg.h"
+#include <config.h>
+
+#ifdef CONFIG_SYS_GRLIB_ESA_MCTRL1
+struct mctrl_setup esa_mctrl1_cfg = {
+ .reg_mask = 0x7,
+ .regs = {
+ {
+ .mask = 0x00000300,
+ .value = CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG1,
+ },
+ {
+ .mask = 0x00000000,
+ .value = CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG2,
+ },
+ {
+ .mask = 0x00000000,
+ .value = CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG3,
+ },
+ }
+};
+#ifdef CONFIG_SYS_GRLIB_ESA_MCTRL2
+struct mctrl_setup esa_mctrl2_cfg = {
+ .reg_mask = 0x7,
+ .regs = {
+ {
+ .mask = 0x00000300,
+ .value = CONFIG_SYS_GRLIB_ESA_MCTRL2_CFG1,
+ },
+ {
+ .mask = 0x00000000,
+ .value = CONFIG_SYS_GRLIB_ESA_MCTRL2_CFG2,
+ },
+ {
+ .mask = 0x00000000,
+ .value = CONFIG_SYS_GRLIB_ESA_MCTRL2_CFG3,
+ },
+ }
+};
+#endif
+#endif
+
+#ifdef CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1
+struct mctrl_setup gaisler_ftmctrl1_cfg = {
+ .reg_mask = 0x7,
+ .regs = {
+ {
+ .mask = 0x00000300,
+ .value = CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG1,
+ },
+ {
+ .mask = 0x00000000,
+ .value = CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG2,
+ },
+ {
+ .mask = 0x00000000,
+ .value = CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG3,
+ },
+ }
+};
+#ifdef CONFIG_SYS_GRLIB_GAISLER_FTMCTRL2
+struct mctrl_setup gaisler_ftmctrl2_cfg = {
+ .reg_mask = 0x7,
+ .regs = {
+ {
+ .mask = 0x00000300,
+ .value = CONFIG_SYS_GRLIB_GAISLER_FTMCTRL2_CFG1,
+ },
+ {
+ .mask = 0x00000000,
+ .value = CONFIG_SYS_GRLIB_GAISLER_FTMCTRL2_CFG2,
+ },
+ {
+ .mask = 0x00000000,
+ .value = CONFIG_SYS_GRLIB_GAISLER_FTMCTRL2_CFG3,
+ },
+ }
+};
+#endif
+#endif
+
+#ifdef CONFIG_SYS_GRLIB_GAISLER_SDCTRL1
+struct mctrl_setup gaisler_sdctrl1_cfg = {
+ .reg_mask = 0x1,
+ .regs = {
+ {
+ .mask = 0x00000000,
+ .value = CONFIG_SYS_GRLIB_GAISLER_SDCTRL1_CTRL,
+ },
+ }
+};
+#ifdef CONFIG_SYS_GRLIB_GAISLER_SDCTRL2
+struct mctrl_setup gaisler_sdctrl2_cfg = {
+ .reg_mask = 0x1,
+ .regs = {
+ {
+ .mask = 0x00000000,
+ .value = CONFIG_SYS_GRLIB_GAISLER_SDCTRL2_CTRL,
+ },
+ }
+};
+#endif
+#endif
+
+#ifdef CONFIG_SYS_GRLIB_GAISLER_DDR2SPA1
+struct ahbmctrl_setup gaisler_ddr2spa1_cfg = {
+ .ahb_mbar_no = 1,
+ .reg_mask = 0xd,
+ .regs = {
+ {
+ .mask = 0x00000000,
+ .value = CONFIG_SYS_GRLIB_GAISLER_DDR2SPA1_CFG1,
+ },
+ { 0x00000000, 0},
+ {
+ .mask = 0x00000000,
+ .value = CONFIG_SYS_GRLIB_GAISLER_DDR2SPA1_CFG3,
+ },
+ {
+ .mask = 0x00000000,
+ .value = CONFIG_SYS_GRLIB_GAISLER_DDR2SPA1_CFG4,
+ },
+ }
+};
+#ifdef CONFIG_SYS_GRLIB_GAISLER_DDR2SPA2
+struct ahbmctrl_setup gaisler_ddr2spa2_cfg = {
+ .ahb_mbar_no = 1,
+ .reg_mask = 0xd,
+ .regs = {
+ {
+ .mask = 0x00000000,
+ .value = CONFIG_SYS_GRLIB_GAISLER_DDR2SPA2_CFG1,
+ },
+ { 0x00000000, 0},
+ {
+ .mask = 0x00000000,
+ .value = CONFIG_SYS_GRLIB_GAISLER_DDR2SPA2_CFG3,
+ },
+ {
+ .mask = 0x00000000,
+ .value = CONFIG_SYS_GRLIB_GAISLER_DDR2SPA2_CFG4,
+ },
+ }
+};
+#endif
+#endif
+
+#ifdef CONFIG_SYS_GRLIB_GAISLER_DDRSPA1
+struct ahbmctrl_setup gaisler_ddrspa1_cfg = {
+ .ahb_mbar_no = 1,
+ .reg_mask = 0x1,
+ .regs = {
+ {
+ .mask = 0x00000000,
+ .value = CONFIG_SYS_GRLIB_GAISLER_DDRSPA1_CTRL,
+ },
+ }
+};
+#ifdef CONFIG_SYS_GRLIB_GAISLER_DDRSPA2
+struct ahbmctrl_setup gaisler_ddrspa2_cfg = {
+ .ahb_mbar_no = 1,
+ .reg_mask = 0x1,
+ .regs = {
+ {
+ .mask = 0x00000000,
+ .value = CONFIG_SYS_GRLIB_GAISLER_DDRSPA2_CTRL,
+ },
+ }
+};
+#endif
+#endif
+
+struct grlib_mctrl_handler grlib_mctrl_handlers[] = {
+/* ESA MCTRL (PROM/FLASH/IO/SRAM/SDRAM) */
+#ifdef CONFIG_SYS_GRLIB_ESA_MCTRL1
+ {DEV_APB_SLV, 0, MH_UNUSED, AMBA_PNP_ID(VENDOR_ESA, ESA_MCTRL),
+ _nomem_mctrl_init, (void *)&esa_mctrl1_cfg},
+#ifdef CONFIG_SYS_GRLIB_ESA_MCTRL2
+ {DEV_APB_SLV, 1, MH_UNUSED, AMBA_PNP_ID(VENDOR_ESA, ESA_MCTRL),
+ _nomem_mctrl_init, (void *)&esa_mctrl2_cfg},
+#endif
+#endif
+
+/* GAISLER Fault Tolerant Memory controller (PROM/FLASH/IO/SRAM/SDRAM) */
+#ifdef CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1
+ {DEV_APB_SLV, 0, MH_UNUSED, AMBA_PNP_ID(VENDOR_GAISLER, GAISLER_FTMCTRL),
+ _nomem_mctrl_init, (void *)&gaisler_ftmctrl1_cfg},
+#ifdef CONFIG_SYS_GRLIB_GAISLER_FTMCTRL2
+ {DEV_APB_SLV, 1, MH_UNUSED, AMBA_PNP_ID(VENDOR_GAISLER, GAISLER_FTMCTRL),
+ _nomem_mctrl_init, (void *)&gaisler_ftmctrl2_cfg},
+#endif
+#endif
+
+/* GAISLER SDRAM-only Memory controller (SDRAM) */
+#ifdef CONFIG_SYS_GRLIB_GAISLER_SDCTRL1
+ {DEV_APB_SLV, 0, MH_UNUSED, AMBA_PNP_ID(VENDOR_GAISLER, GAISLER_SDCTRL),
+ _nomem_mctrl_init, (void *)&gaisler_sdctrl1_cfg},
+#ifdef CONFIG_SYS_GRLIB_GAISLER_SDCTRL2
+ {DEV_APB_SLV, 1, MH_UNUSED, AMBA_PNP_ID(VENDOR_GAISLER, GAISLER_SDCTRL),
+ _nomem_mctrl_init, (void *)&gaisler_sdctrl2_cfg},
+#endif
+#endif
+
+/* GAISLER DDR Memory controller (DDR) */
+#ifdef CONFIG_SYS_GRLIB_GAISLER_DDRSPA1
+ {DEV_AHB_SLV, 0, MH_UNUSED, AMBA_PNP_ID(VENDOR_GAISLER, GAISLER_DDRSP),
+ _nomem_ahbmctrl_init, (void *)&gaisler_ddrspa1_cfg},
+#ifdef CONFIG_SYS_GRLIB_GAISLER_DDRSPA2
+ {DEV_AHB_SLV, 1, MH_UNUSED, AMBA_PNP_ID(VENDOR_GAISLER, GAISLER_DDRSP),
+ _nomem_ahbmctrl_init, (void *)&gaisler_ddrspa2_cfg},
+#endif
+#endif
+
+/* GAISLER DDR2 Memory controller (DDR2) */
+#ifdef CONFIG_SYS_GRLIB_GAISLER_DDR2SPA1
+ {DEV_AHB_SLV, 0, MH_UNUSED, AMBA_PNP_ID(VENDOR_GAISLER, GAISLER_DDR2SP),
+ _nomem_ahbmctrl_init, (void *)&gaisler_ddr2spa1_cfg},
+#ifdef CONFIG_SYS_GRLIB_GAISLER_DDR2SPA2
+ {DEV_AHB_SLV, 1, MH_UNUSED, AMBA_PNP_ID(VENDOR_GAISLER, GAISLER_DDR2SP),
+ _nomem_ahbmctrl_init, (void *)&gaisler_ddr2spa2_cfg},
+#endif
+#endif
+
+ /* Mark end */
+ MH_END
+};
diff --git a/arch/sparc/cpu/leon3/memcfg.h b/arch/sparc/cpu/leon3/memcfg.h
new file mode 100644
index 0000000000..a524896e5a
--- /dev/null
+++ b/arch/sparc/cpu/leon3/memcfg.h
@@ -0,0 +1,90 @@
+/* GRLIB Memory controller setup structures
+ *
+ * (C) Copyright 2010, 2015
+ * Daniel Hellstrom, Cobham Gaisler, daniel@gaisler.com.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __MEMCFG_H__
+#define __MEMCFG_H__
+
+/*********** Low Level Memory Controller Initalization ***********/
+
+#ifndef __ASSEMBLER__
+
+struct grlib_mctrl_handler;
+
+typedef void (*mctrl_handler_t)(
+ struct grlib_mctrl_handler *dev,
+ void *conf,
+ unsigned int ioarea
+ );
+
+/* Memory Controller Handler Structure */
+struct grlib_mctrl_handler {
+ unsigned char type; /* 0x00. MASK: AHB MST&SLV, APB SLV */
+ char index; /* 0x01. Unit number, 0, 1, 2... */
+ char unused[2]; /* 0x02 */
+ unsigned int ven_dev; /* 0x04. Device and Vendor */
+ mctrl_handler_t func; /* 0x08. Memory Controller Handler */
+ void *priv; /* 0x0c. Optional private data, ptr to
+ * info how to set up controller */
+};
+
+extern struct grlib_mctrl_handler grlib_mctrl_handlers[];
+
+#endif
+
+#define MH_STRUCT_SIZE (4*4)
+#define MH_TYPE 0x00
+#define MH_INDEX 0x01
+#define MH_VENDOR_DEVICE 0x04
+#define MH_FUNC 0x08
+#define MH_PRIV 0x0c
+
+#define MH_TYPE_NONE DEV_NONE
+#define MH_TYPE_AHB_MST DEV_AHB_MST
+#define MH_TYPE_AHB_SLV DEV_AHB_SLV
+#define MH_TYPE_APB_SLV DEV_APB_SLV
+
+#define MH_UNUSED {0, 0}
+#define MH_END {DEV_NONE, 0, MH_UNUSED, AMBA_PNP_ID(0, 0), 0, 0}
+
+/*********** Low Level Memory Controller Initalization Handlers ***********/
+
+#ifndef __ASSEMBLER__
+extern void _nomem_mctrl_init(
+ struct grlib_mctrl_handler *dev,
+ void *conf,
+ unsigned int ioarea_apbmst);
+
+struct mctrl_setup {
+ unsigned int reg_mask; /* Which registers to write */
+ struct {
+ unsigned int mask; /* Mask used keep reg bits unchanged */
+ unsigned int value; /* Value written to register */
+ } regs[8];
+};
+
+extern void _nomem_ahbmctrl_init(
+ struct grlib_mctrl_handler *dev,
+ void *conf,
+ unsigned int ioarea_apbmst);
+
+struct ahbmctrl_setup {
+ int ahb_mbar_no; /* MBAR to get register address from */
+ unsigned int reg_mask; /* Which registers to write */
+ struct {
+ unsigned int mask; /* Mask used keep reg bits unchanged */
+ unsigned int value; /* Value written to register */
+ } regs[8];
+};
+#endif
+
+/* mctrl_setup data structure defines */
+#define NREGS_OFS 0
+#define REGS_OFS 0x4
+#define REGS_SIZE 8
+
+#endif
diff --git a/arch/sparc/cpu/leon3/memcfg_low.S b/arch/sparc/cpu/leon3/memcfg_low.S
new file mode 100644
index 0000000000..84a81a90a9
--- /dev/null
+++ b/arch/sparc/cpu/leon3/memcfg_low.S
@@ -0,0 +1,253 @@
+/* This is the memory initialization functions, the function
+ * implemented below initializes each memory controller
+ * found and specified by the input grlib_mctrl_handler structure.
+ *
+ * After the memory controllers have been initialized the stack
+ * can be used.
+ *
+ * (C) Copyright 2010, 2015
+ * Daniel Hellstrom, Cobham Gaisler, daniel@gaisler.com.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <ambapp.h>
+#include "memcfg.h"
+#include <config.h>
+
+ .seg "text"
+ .globl _nomem_memory_ctrl_init
+ .globl _nomem_mctrl_init, _nomem_ahbmctrl_init
+ .extern _nomem_find_apb
+ .extern _nomem_find_ahb
+
+
+/* FUNCTION
+ * _nomem_memory_controller_init(struct grlib_mctrl_handler *mem_handlers)
+ *
+ * Initialize AMBA devices, _nomem_amba_init() has prepared i0-i5
+ * with the AHB buses on the system.
+ *
+ * For each entry in mem_handlers find the VENDOR:DEVICE and handle it
+ * by calling the handler function pointer.
+ *
+ * Constraints:
+ * i6, i7, o6, l7, l6, g3, g4, g5, g6, g7 is used by caller
+ * o7 is return address
+ * l5 reserved for this function for future use.
+ *
+ * Arguments
+ * - o0 Pointer to memory handler array
+ *
+ * Results
+ * - o0 Number of memory controllers found
+ *
+ * Clobbered
+ * - o0 (Current AHB slave conf address)
+ * - l0 (mem handler entry address)
+ * - l1 (Return value, number of memory controllers found)
+ * - o7 (function pointer)
+ * - l0, l1, l2, l3, l4, g1, g2 (used by _nomem_ambapp_find_buses)
+ * - o0, o1, o2, o3, o4, o5 (Used as arguments)
+ *
+ * - g1 ( level 1 return address)
+ * - g2 ( level 2 return address)
+ */
+
+_nomem_memory_ctrl_init:
+ /* At this point all AHB buses has been found and the I/O Areas of
+ * all AHB buses is stored in the i0-i5 registers. Max 6 buses. Next,
+ * memory controllers are found by searching all buses for matching
+ * VENDOR:DEVICE. The VENDOR:DEVICE to search for are taken from the
+ * mem_handlers array. For each match the function pointer stored in
+ * the mem_handler entry is called to handle the hardware setup.
+ */
+ mov %o7, %g1 /* Save return address */
+ mov %o0, %l0
+ mov %g0, %l1 /* The return value */
+
+.L_do_one_mem_handler:
+ ld [%l0 + MH_FUNC], %o7
+ cmp %o7, %g0
+ be .L_all_mctrl_handled
+ nop
+
+ /*** Scan for memory controller ***/
+
+ /* Set up argments, o5 not used by _nomem_find_apb */
+ ldub [%l0 + MH_TYPE], %o5
+ clr %o4
+ clr %o3
+ ldub [%l0 + MH_INDEX], %o2
+ ld [%l0 + MH_VENDOR_DEVICE], %o1
+
+ /* An empty config? */
+ cmp %o5, DEV_NONE
+ beq .L_all_mctrl_next
+
+ /* Select function (APB or AHB) */
+ cmp %o5, DEV_APB_SLV
+ bne .L_find_ahb_memctrl
+ clr %o0
+.L_find_apb_memctrl:
+ call _nomem_find_apb /* Scan for APB slave device */
+ nop
+
+ /* o3 = iobar address
+ * o4 = AHB Bus index
+ *
+ * REG ADR = ((iobar >> 12) & (iobar << 4) & 0xfff00) | "APB Base"
+ */
+ ld [%o3 + AMBA_APB_IOBAR_OFS], %o5
+ srl %o5, 12, %o2
+ sll %o5, 4, %o5
+ and %o2, %o5, %o5
+ set 0xfff00, %o2
+ and %o2, %o5, %o5
+ sethi %hi(0xfff00000), %o2
+ and %o3, %o2, %o2
+ or %o5, %o2, %o5 /* Register base address */
+
+ ba .L_call_one_mem_handler
+ nop
+
+.L_find_ahb_memctrl:
+ call _nomem_find_ahb /* Scan for AHB Slave or Master.
+ * o5 determine type. */
+ nop
+ clr %o5
+
+ /* Call the handler function if the hardware was found
+ *
+ * o0 = mem_handler
+ * o1 = Configuration address
+ * o2 = AHB Bus index
+ * o3 = APB Base register (if APB Slave)
+ *
+ * Constraints:
+ * i0-i7, l0, l1, l5, g1, g3-g7 may no be used.
+ */
+.L_call_one_mem_handler:
+ cmp %o0, %g0
+ be .L_all_mctrl_next
+ mov %l0, %o0 /* Mem handler pointer */
+ mov %o3, %o1 /* AMBA PnP Configuration address */
+ mov %o4, %o2 /* AHB Bus index */
+ ld [%l0 + MH_FUNC], %o7 /* Get Function pointer */
+ call %o7
+ mov %o5, %o3 /* APB Register Base Address */
+
+ inc %l1 /* Number of Memory controllers
+ * handled. */
+
+ /* Do next entry in mem_handlers */
+.L_all_mctrl_next:
+ ba .L_do_one_mem_handler
+ add %l0, MH_STRUCT_SIZE, %l0
+
+.L_all_mctrl_handled:
+ mov %g1, %o7 /* Restore return address */
+ retl
+ mov %l1, %o0
+
+
+
+/* Generic Memory controller initialization routine (APB Registers)
+ *
+ * o0 = mem_handler structure pointer
+ * o1 = Configuration address
+ * o2 = AHB Bus index
+ * o3 = APB Base register
+ *
+ * Clobbered
+ * o0-o4
+ */
+_nomem_mctrl_init:
+ ld [%o0 + MH_PRIV], %o0 /* Get Private structure */
+ ld [%o0], %o1 /* Get Reg Mask */
+ and %o1, 0xff, %o1
+ add %o0, REGS_OFS, %o0 /* Point to first reg */
+.L_do_one_reg:
+ andcc %o1, 0x1, %g0
+ beq .L_do_next_reg
+ ld [%o0], %o2
+ ld [%o3], %o4
+ and %o4, %o2, %o4
+ ld [%o0 + 4], %o2
+ or %o4, %o2, %o4
+ st %o4, [%o3]
+
+.L_do_next_reg:
+ add %o0, REGS_SIZE, %o0
+ add %o3, 4, %o3
+ srl %o1, 1, %o1
+ cmp %o1, 0
+ bne .L_do_one_reg
+ nop
+
+ /* No more registers to write */
+ retl
+ nop
+
+
+
+/* Generic Memory controller initialization routine (AHB Registers)
+ *
+ * o0 = mem_handler structure pointer
+ * o1 = Configuration address of memory controller
+ * o2 = AHB Bus index
+ *
+ * Clobbered
+ * o0-o5
+ */
+_nomem_ahbmctrl_init:
+ ld [%o0 + MH_PRIV], %o0 /* Get Private structure */
+
+ /* Get index of AHB MBAR to get registers from */
+ ld [%o0], %o5
+ add %o0, 4, %o0
+
+ /* Get Address of MBAR in PnP info */
+ add %o5, 4, %o5
+ sll %o5, 2, %o5
+ add %o5, %o1, %o5 /* Address of MBAR */
+
+ /* Get Address of registers from PnP information
+ * Address is in AHB I/O format, i.e. relative to bus
+ *
+ * ADR = (iobar & (iobar << 16) & 0xfff00000)
+ * IOADR = (ADR >> 12) | "APB Base"
+ */
+ ld [%o5], %o5
+ sll %o5, 16, %o4
+ and %o5, %o4, %o5
+ sethi %hi(0xfff00000), %o4
+ and %o5, %o4, %o5 /* ADR */
+ and %o4, %o1, %o4
+ srl %o5, 12, %o5
+ or %o5, %o4, %o3 /* IOADR in o3 */
+
+ ld [%o0], %o1 /* Get Reg Mask */
+ and %o1, 0xff, %o1
+ add %o0, REGS_OFS, %o0 /* Point to first reg */
+.L_do_one_ahbreg:
+ andcc %o1, 0x1, %g0
+ beq .L_do_next_reg
+ ld [%o0], %o2
+ ld [%o3], %o4
+ and %o4, %o2, %o4
+ ld [%o0 + 4], %o2
+ or %o4, %o2, %o4
+ st %o4, [%o3]
+
+.L_do_next_ahbreg:
+ add %o0, REGS_SIZE, %o0
+ add %o3, 4, %o3
+ srl %o1, 1, %o1
+ cmp %o1, 0
+ bne .L_do_one_reg
+ nop
+
+ /* No more registers to write */
+ retl
+ nop
diff --git a/arch/sparc/cpu/leon3/prom.c b/arch/sparc/cpu/leon3/prom.c
index b83776bc06..c391be7420 100644
--- a/arch/sparc/cpu/leon3/prom.c
+++ b/arch/sparc/cpu/leon3/prom.c
@@ -15,13 +15,17 @@
#include <asm/irq.h>
#include <asm/leon.h>
#include <ambapp.h>
+#include <grlib/apbuart.h>
+#include <grlib/irqmp.h>
+#include <grlib/gptimer.h>
#include <config.h>
/*
#define PRINT_ROM_VEC
*/
extern struct linux_romvec *kernel_arg_promvec;
-extern ambapp_dev_apbuart *leon3_apbuart;
+
+DECLARE_GLOBAL_DATA_PTR;
#define PROM_PGT __attribute__ ((__section__ (".prom.pgt")))
#define PROM_TEXT __attribute__ ((__section__ (".prom.text")))
@@ -740,14 +744,14 @@ static int PROM_TEXT leon_nbputchar(int c)
/* Wait for last character to go. */
while (!(SPARC_BYPASS_READ(&uart->status)
- & LEON_REG_UART_STATUS_THE)) ;
+ & APBUART_STATUS_THE));
/* Send data */
SPARC_BYPASS_WRITE(&uart->data, c);
/* Wait for data to be sent */
while (!(SPARC_BYPASS_READ(&uart->status)
- & LEON_REG_UART_STATUS_TSE)) ;
+ & APBUART_STATUS_TSE));
return 0;
}
@@ -909,7 +913,7 @@ void leon_prom_init(struct leon_prom_info *pspi)
pspi->avail.num_bytes = pspi->totphys.num_bytes;
/* Set the pointer to the Console UART in romvec */
- pspi->reloc_funcs.leon3_apbuart = leon3_apbuart;
+ pspi->reloc_funcs.leon3_apbuart = gd->arch.uart;
{
int j = 1;
diff --git a/arch/sparc/cpu/leon3/serial.c b/arch/sparc/cpu/leon3/serial.c
index bca6b6548b..66b3773027 100644
--- a/arch/sparc/cpu/leon3/serial.c
+++ b/arch/sparc/cpu/leon3/serial.c
@@ -1,66 +1,79 @@
/* GRLIB APBUART Serial controller driver
*
- * (C) Copyright 2007
- * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com.
+ * (C) Copyright 2007, 2015
+ * Daniel Hellstrom, Cobham Gaisler, daniel@gaisler.com.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
-#include <asm/processor.h>
-#include <asm/leon.h>
+#include <asm/io.h>
#include <ambapp.h>
+#include <grlib/apbuart.h>
#include <serial.h>
-#include <linux/compiler.h>
+#include <watchdog.h>
DECLARE_GLOBAL_DATA_PTR;
-ambapp_dev_apbuart *leon3_apbuart = NULL;
+/* Select which UART that will become u-boot console */
+#ifndef CONFIG_SYS_GRLIB_APBUART_INDEX
+#define CONFIG_SYS_GRLIB_APBUART_INDEX 0
+#endif
static int leon3_serial_init(void)
{
+ ambapp_dev_apbuart *uart;
ambapp_apbdev apbdev;
unsigned int tmp;
/* find UART */
- if (ambapp_apb_first(VENDOR_GAISLER, GAISLER_APBUART, &apbdev) == 1) {
+ if (ambapp_apb_find(&ambapp_plb, VENDOR_GAISLER, GAISLER_APBUART,
+ CONFIG_SYS_GRLIB_APBUART_INDEX, &apbdev) != 1) {
+ panic("%s: apbuart not found!\n", __func__);
+ return -1; /* didn't find hardware */
+ }
- leon3_apbuart = (ambapp_dev_apbuart *) apbdev.address;
+ /* found apbuart, let's init .. */
+ uart = (ambapp_dev_apbuart *) apbdev.address;
- /* found apbuart, let's init...
- *
- * Set scaler / baud rate
- *
- * Receiver & transmitter enable
- */
- leon3_apbuart->scaler = CONFIG_SYS_GRLIB_APBUART_SCALER;
+ /* Set scaler / baud rate */
+ tmp = (((CONFIG_SYS_CLK_FREQ*10) / (CONFIG_BAUDRATE*8)) - 5)/10;
+ writel(tmp, &uart->scaler);
- /* Let bit 11 be unchanged (debug bit for GRMON) */
- tmp = READ_WORD(leon3_apbuart->ctrl);
+ /* Let bit 11 be unchanged (debug bit for GRMON) */
+ tmp = readl(&uart->ctrl) & APBUART_CTRL_DBG;
+ /* Receiver & transmitter enable */
+ tmp |= APBUART_CTRL_RE | APBUART_CTRL_TE;
+ writel(tmp, &uart->ctrl);
- leon3_apbuart->ctrl = ((tmp & LEON_REG_UART_CTRL_DBG) |
- LEON_REG_UART_CTRL_RE |
- LEON_REG_UART_CTRL_TE);
+ gd->arch.uart = uart;
+ return 0;
+}
- return 0;
- }
- return -1; /* didn't find hardware */
+static inline ambapp_dev_apbuart *leon3_get_uart_regs(void)
+{
+ ambapp_dev_apbuart *uart = gd->arch.uart;
+ return uart;
}
static void leon3_serial_putc_raw(const char c)
{
- if (!leon3_apbuart)
+ ambapp_dev_apbuart * const uart = leon3_get_uart_regs();
+
+ if (!uart)
return;
/* Wait for last character to go. */
- while (!(READ_WORD(leon3_apbuart->status) & LEON_REG_UART_STATUS_THE)) ;
+ while (!(readl(&uart->status) & APBUART_STATUS_THE))
+ WATCHDOG_RESET();
/* Send data */
- leon3_apbuart->data = c;
+ writel(c, &uart->data);
#ifdef LEON_DEBUG
/* Wait for data to be sent */
- while (!(READ_WORD(leon3_apbuart->status) & LEON_REG_UART_STATUS_TSE)) ;
+ while (!(readl(&uart->status) & APBUART_STATUS_TSE))
+ WATCHDOG_RESET();
#endif
}
@@ -74,36 +87,44 @@ static void leon3_serial_putc(const char c)
static int leon3_serial_getc(void)
{
- if (!leon3_apbuart)
+ ambapp_dev_apbuart * const uart = leon3_get_uart_regs();
+
+ if (!uart)
return 0;
/* Wait for a character to arrive. */
- while (!(READ_WORD(leon3_apbuart->status) & LEON_REG_UART_STATUS_DR)) ;
+ while (!(readl(&uart->status) & APBUART_STATUS_DR))
+ WATCHDOG_RESET();
- /* read data */
- return READ_WORD(leon3_apbuart->data);
+ /* Read character data */
+ return readl(&uart->data);
}
static int leon3_serial_tstc(void)
{
- if (leon3_apbuart)
- return (READ_WORD(leon3_apbuart->status) &
- LEON_REG_UART_STATUS_DR);
- return 0;
+ ambapp_dev_apbuart * const uart = leon3_get_uart_regs();
+
+ if (!uart)
+ return 0;
+
+ return readl(&uart->status) & APBUART_STATUS_DR;
}
/* set baud rate for uart */
static void leon3_serial_setbrg(void)
{
- /* update baud rate settings, read it from gd->baudrate */
+ ambapp_dev_apbuart * const uart = leon3_get_uart_regs();
unsigned int scaler;
- if (leon3_apbuart && (gd->baudrate > 0)) {
- scaler =
- (((CONFIG_SYS_CLK_FREQ * 10) / (gd->baudrate * 8)) -
- 5) / 10;
- leon3_apbuart->scaler = scaler;
- }
- return;
+
+ if (!uart)
+ return;
+
+ if (!gd->baudrate)
+ gd->baudrate = CONFIG_BAUDRATE;
+
+ scaler = (((CONFIG_SYS_CLK_FREQ*10) / (gd->baudrate*8)) - 5)/10;
+
+ writel(scaler, &uart->scaler);
}
static struct serial_device leon3_serial_drv = {
@@ -126,3 +147,26 @@ __weak struct serial_device *default_serial_console(void)
{
return &leon3_serial_drv;
}
+
+#ifdef CONFIG_DEBUG_UART_APBUART
+
+#include <debug_uart.h>
+
+static inline void _debug_uart_init(void)
+{
+ ambapp_dev_apbuart *uart = (ambapp_dev_apbuart *)CONFIG_DEBUG_UART_BASE;
+ uart->scaler = (((CONFIG_DEBUG_UART_CLOCK*10) / (CONFIG_BAUDRATE*8)) - 5)/10;
+ uart->ctrl = APBUART_CTRL_RE | APBUART_CTRL_TE;
+}
+
+static inline void _debug_uart_putc(int ch)
+{
+ ambapp_dev_apbuart *uart = (ambapp_dev_apbuart *)CONFIG_DEBUG_UART_BASE;
+ while (!(readl(&uart->status) & APBUART_STATUS_THE))
+ WATCHDOG_RESET();
+ writel(ch, &uart->data);
+}
+
+DEBUG_UART_FUNCS
+
+#endif
diff --git a/arch/sparc/cpu/leon3/start.S b/arch/sparc/cpu/leon3/start.S
index cf897f6877..203114970b 100644
--- a/arch/sparc/cpu/leon3/start.S
+++ b/arch/sparc/cpu/leon3/start.S
@@ -2,9 +2,6 @@
* Copyright (C) 2007,
* Daniel Hellstrom, daniel@gaisler.com
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
* SPDX-License-Identifier: GPL-2.0+
*/
@@ -16,6 +13,12 @@
#include <asm/stack.h>
#include <asm/leon.h>
#include <version.h>
+#include <ambapp.h>
+
+/* Default Plug&Play I/O area */
+#ifndef CONFIG_AMBAPP_IOAREA
+#define CONFIG_AMBAPP_IOAREA AMBA_DEFAULT_IOAREA
+#endif
/* Entry for traps which jump to a programmer-specified trap handler. */
#define TRAPR(H) \
@@ -60,6 +63,27 @@ MINFRAME = (WINDOWSIZE + ARGPUSHSIZE + 4)
#error Must define number of SPARC register windows, default is 8
#endif
+/* Macros to load address into a register. Uses GOT table for PIC */
+#ifdef __PIC__
+
+#define SPARC_PIC_THUNK_CALL(reg) \
+ sethi %pc22(_GLOBAL_OFFSET_TABLE_-4), %##reg; \
+ call __sparc_get_pc_thunk.reg; \
+ add %##reg, %pc10(_GLOBAL_OFFSET_TABLE_+4), %##reg;
+
+#define SPARC_LOAD_ADDRESS(sym, got, reg) \
+ sethi %gdop_hix22(sym), %##reg; \
+ xor %##reg, %gdop_lox10(sym), %##reg; \
+ ld [%##got + %##reg], %##reg, %gdop(sym);
+
+#else
+
+#define SPARC_PIC_THUNK_CALL(reg)
+#define SPARC_LOAD_ADDRESS(sym, got, tmp) \
+ set sym, %##reg;
+
+#endif
+
#define STACK_ALIGN 8
#define SA(X) (((X)+(STACK_ALIGN-1)) & ~(STACK_ALIGN-1))
@@ -190,6 +214,7 @@ version_string:
.ascii U_BOOT_VERSION_STRING, "\0"
.section ".text"
+ .extern _nomem_amba_init, _nomem_memory_ctrl_init
.align 4
_hardreset:
@@ -232,7 +257,7 @@ clear_window:
bge clear_window
save
-wininit:
+wiminit:
set WIM_INIT, %g3
mov %g3, %wim
@@ -241,9 +266,41 @@ stackp:
andn %fp, 0x0f, %fp
sub %fp, 64, %sp
+/* Obtain the address of _GLOBAL_OFFSET_TABLE_ */
+ SPARC_PIC_THUNK_CALL(l7)
+
+/* Scan AMBA Bus for AMBA buses using PnP information. All found
+ * AMBA buses I/O area will be located in i0-i5 upon return.
+ * The i0-i5 registers are later used by _nomem_amba_init2
+ */
+ambainit:
+ call _nomem_amba_init
+ sethi %hi(CONFIG_AMBAPP_IOAREA), %o0
+
+/* Scan AMBA Buses for memory controllers, then initialize the
+ * memory controllers. Note that before setting up the memory controller
+ * the stack can not be used.
+ */
+memory_ctrl_init:
+ SPARC_LOAD_ADDRESS(grlib_mctrl_handlers, l7, o0)
+
+ call _nomem_memory_ctrl_init
+ nop
+
+/* The return valu indicate how many memory controllers where found and
+ * initialized, if no memory controller was initialized, we can not continue
+ * because from here on we expect memory to be working.
+ */
+ cmp %o0, 0
+memory_ctrl_init_failed:
+ beq memory_ctrl_init_failed
+ nop
+
+/*** From now on the stack can be used. ***/
+
cpu_init_unreloc:
call cpu_init_f
- nop
+ nop
/* un relocated start address of monitor */
#define TEXT_START _text
@@ -252,8 +309,8 @@ cpu_init_unreloc:
#define DATA_END __init_end
reloc:
- set TEXT_START,%g2
- set DATA_END,%g3
+ SPARC_LOAD_ADDRESS(TEXT_START, l7, g2)
+ SPARC_LOAD_ADDRESS(DATA_END, l7, g3)
set CONFIG_SYS_RELOC_MONITOR_BASE,%g4
reloc_loop:
ldd [%g2],%l0
@@ -263,7 +320,7 @@ reloc_loop:
inc 16,%g2
subcc %g3,%g2,%g0
bne reloc_loop
- inc 16,%g4
+ inc 16,%g4
clr %l0
clr %l1
@@ -280,8 +337,8 @@ reloc_loop:
clr_bss:
/* clear bss area (the relocated) */
- set __bss_start,%g2
- set __bss_end,%g3
+ SPARC_LOAD_ADDRESS(__bss_start, l7, g2)
+ SPARC_LOAD_ADDRESS(__bss_end, l7, g3)
sub %g3,%g2,%g3
add %g3,%g4,%g3
clr %g1 /* std %g0 uses g0 and g1 */
@@ -292,19 +349,19 @@ clr_bss_16:
inc 16,%g4
cmp %g3,%g4
bne clr_bss_16
- nop
+ nop
/* add offsets to GOT table */
fixup_got:
- set __got_start,%g4
- set __got_end,%g3
+ SPARC_LOAD_ADDRESS(__got_start, l7, g4)
+ SPARC_LOAD_ADDRESS(__got_end, l7, g3)
/*
* new got offset = (old GOT-PTR (read with ld) -
* CONFIG_SYS_RELOC_MONITOR_BASE(from define) ) +
* Destination Address (from define)
*/
set CONFIG_SYS_RELOC_MONITOR_BASE,%g2
- set TEXT_START, %g1
+ SPARC_LOAD_ADDRESS(TEXT_START, l7, g1)
add %g4,%g2,%g4
sub %g4,%g1,%g4
add %g3,%g2,%g3
@@ -319,11 +376,11 @@ got_loop:
inc 4,%g4
cmp %g3,%g4
bne got_loop
- nop
+ nop
prom_relocate:
- set __prom_start, %g2
- set __prom_end, %g3
+ SPARC_LOAD_ADDRESS(__prom_start, l7, g2)
+ SPARC_LOAD_ADDRESS(__prom_end, l7, g3)
set CONFIG_SYS_PROM_OFFSET, %g4
prom_relocate_loop:
@@ -334,7 +391,7 @@ prom_relocate_loop:
inc 16,%g2
subcc %g3,%g2,%g0
bne prom_relocate_loop
- inc 16,%g4
+ inc 16,%g4
/* Trap table has been moved, lets tell CPU about
* the new trap table address
@@ -361,19 +418,20 @@ snoop_detect:
nop
/* Call relocated init functions */
jump:
- set cpu_init_f2,%o1
+ SPARC_LOAD_ADDRESS(cpu_init_f2, l7, o1)
set CONFIG_SYS_RELOC_MONITOR_BASE,%o2
add %o1,%o2,%o1
sub %o1,%g1,%o1
call %o1
- clr %o0
+ clr %o0
- set board_init_f,%o1
+ SPARC_LOAD_ADDRESS(board_init_f, l7, o1)
set CONFIG_SYS_RELOC_MONITOR_BASE,%o2
+ SPARC_LOAD_ADDRESS(TEXT_START, l7, g1)
add %o1,%o2,%o1
sub %o1,%g1,%o1
call %o1
- clr %o0
+ clr %o0
dead: ta 0 ! if call returns...
nop
diff --git a/arch/sparc/cpu/leon3/usb_uhci.c b/arch/sparc/cpu/leon3/usb_uhci.c
index ca7d6e86f0..1be84c646b 100644
--- a/arch/sparc/cpu/leon3/usb_uhci.c
+++ b/arch/sparc/cpu/leon3/usb_uhci.c
@@ -690,11 +690,11 @@ void handle_usb_interrupt(void)
*/
int usb_lowlevel_init(int index, enum usb_init_type init, void **controller)
{
- unsigned char temp;
ambapp_ahbdev ahbdev;
/* Find GRUSB core using AMBA Plug&Play information */
- if (ambapp_ahbslv_first(VENDOR_GAISLER, GAISLER_UHCI, &ahbdev) != 1) {
+ if (ambapp_ahbslv_find(&ambapp_plb, VENDOR_GAISLER, GAISLER_UHCI,
+ CONFIG_SYS_GRLIB_GRUSB_INDEX, &ahbdev) != 1) {
printf("USB UHCI: Failed to find GRUSB controller\n");
return -1;
}
diff --git a/arch/sparc/include/asm/global_data.h b/arch/sparc/include/asm/global_data.h
index 667e7d6d3b..0680a56758 100644
--- a/arch/sparc/include/asm/global_data.h
+++ b/arch/sparc/include/asm/global_data.h
@@ -15,6 +15,7 @@
/* Architecture-specific global data */
struct arch_global_data {
+ void *uart;
};
#include <asm-generic/global_data.h>
diff --git a/arch/sparc/include/asm/io.h b/arch/sparc/include/asm/io.h
index f7b89c890f..a317d132be 100644
--- a/arch/sparc/include/asm/io.h
+++ b/arch/sparc/include/asm/io.h
@@ -1,7 +1,7 @@
/* SPARC I/O definitions
*
- * (C) Copyright 2007
- * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com.
+ * (C) Copyright 2007, 2015
+ * Daniel Hellstrom, Cobham Gaisler, daniel@gaisler.com.
*
* SPDX-License-Identifier: GPL-2.0+
*/
@@ -12,45 +12,57 @@
/* Nothing to sync, total store ordering (TSO)... */
#define sync()
+/*
+ * Generic virtual read/write.
+ */
+
+#ifndef CONFIG_SYS_HAS_NO_CACHE
+
/* Forces a cache miss on read/load.
* On some architectures we need to bypass the cache when reading
* I/O registers so that we are not reading the same status word
* over and over again resulting in a hang (until an IRQ if lucky)
- *
*/
-#ifndef CONFIG_SYS_HAS_NO_CACHE
-#define READ_BYTE(var) SPARC_NOCACHE_READ_BYTE((unsigned int)(var))
-#define READ_HWORD(var) SPARC_NOCACHE_READ_HWORD((unsigned int)(var))
-#define READ_WORD(var) SPARC_NOCACHE_READ((unsigned int)(var))
-#define READ_DWORD(var) SPARC_NOCACHE_READ_DWORD((unsigned int)(var))
+
+#define __arch_getb(a) SPARC_NOCACHE_READ_BYTE((unsigned int)(a))
+#define __arch_getw(a) SPARC_NOCACHE_READ_HWORD((unsigned int)(a))
+#define __arch_getl(a) SPARC_NOCACHE_READ((unsigned int)(a))
+#define __arch_getq(a) SPARC_NOCACHE_READ_DWORD((unsigned int)(a))
+
#else
-#define READ_BYTE(var) (var)
-#define READ_HWORD(var) (var)
-#define READ_WORD(var) (var)
-#define READ_DWORD(var) (var)
-#endif
-/*
- * Generic virtual read/write.
- */
-#define __arch_getb(a) (READ_BYTE(a))
-#define __arch_getw(a) (READ_HWORD(a))
-#define __arch_getl(a) (READ_WORD(a))
-#define __arch_getq(a) (READ_DWORD(a))
+#define __arch_getb(a) (*(volatile unsigned char *)(a))
+#define __arch_getw(a) (*(volatile unsigned short *)(a))
+#define __arch_getl(a) (*(volatile unsigned int *)(a))
+#define __arch_getq(a) (*(volatile unsigned long long *)(a))
+
+#endif /* CONFIG_SYS_HAS_NO_CACHE */
-#define __arch_putb(v,a) (*(volatile unsigned char *)(a) = (v))
-#define __arch_putw(v,a) (*(volatile unsigned short *)(a) = (v))
-#define __arch_putl(v,a) (*(volatile unsigned int *)(a) = (v))
+#define __arch_putb(v, a) (*(volatile unsigned char *)(a) = (v))
+#define __arch_putw(v, a) (*(volatile unsigned short *)(a) = (v))
+#define __arch_putl(v, a) (*(volatile unsigned int *)(a) = (v))
+#define __arch_putq(v, a) (*(volatile unsigned long long *)(a) = (v))
-#define __raw_writeb(v,a) __arch_putb(v,a)
-#define __raw_writew(v,a) __arch_putw(v,a)
-#define __raw_writel(v,a) __arch_putl(v,a)
+#define __raw_writeb(v, a) __arch_putb(v, a)
+#define __raw_writew(v, a) __arch_putw(v, a)
+#define __raw_writel(v, a) __arch_putl(v, a)
+#define __raw_writeq(v, a) __arch_putq(v, a)
#define __raw_readb(a) __arch_getb(a)
#define __raw_readw(a) __arch_getw(a)
#define __raw_readl(a) __arch_getl(a)
#define __raw_readq(a) __arch_getq(a)
+#define writeb __raw_writeb
+#define writew __raw_writew
+#define writel __raw_writel
+#define writeq __raw_writeq
+
+#define readb __raw_readb
+#define readw __raw_readw
+#define readl __raw_readl
+#define readq __raw_readq
+
/*
* Given a physical address and a length, return a virtual address
* that can be used to access the memory range with the caching
diff --git a/arch/sparc/include/asm/winmacro.h b/arch/sparc/include/asm/winmacro.h
index 65e4561e7d..4f68fbda69 100644
--- a/arch/sparc/include/asm/winmacro.h
+++ b/arch/sparc/include/asm/winmacro.h
@@ -136,130 +136,3 @@
ld [reg + FW_FSR], %fsr;
#endif
-
-#ifndef __SPARC_WINMACRO_H__
-#define __SPARC_WINMACRO_H__
-
-#include <asm/asmmacro.h>
-#include <asm/stack.h>
-
-/* Store the register window onto the 8-byte aligned area starting
- * at %reg. It might be %sp, it might not, we don't care.
- */
-#define RW_STORE(reg) \
- std %l0, [%reg + RW_L0]; \
- std %l2, [%reg + RW_L2]; \
- std %l4, [%reg + RW_L4]; \
- std %l6, [%reg + RW_L6]; \
- std %i0, [%reg + RW_I0]; \
- std %i2, [%reg + RW_I2]; \
- std %i4, [%reg + RW_I4]; \
- std %i6, [%reg + RW_I6];
-
-/* Load a register window from the area beginning at %reg. */
-#define RW_LOAD(reg) \
- ldd [%reg + RW_L0], %l0; \
- ldd [%reg + RW_L2], %l2; \
- ldd [%reg + RW_L4], %l4; \
- ldd [%reg + RW_L6], %l6; \
- ldd [%reg + RW_I0], %i0; \
- ldd [%reg + RW_I2], %i2; \
- ldd [%reg + RW_I4], %i4; \
- ldd [%reg + RW_I6], %i6;
-
-/* Loading and storing struct pt_reg trap frames. */
-#define PT_LOAD_INS(base_reg) \
- ldd [%base_reg + SF_REGS_SZ + PT_I0], %i0; \
- ldd [%base_reg + SF_REGS_SZ + PT_I2], %i2; \
- ldd [%base_reg + SF_REGS_SZ + PT_I4], %i4; \
- ldd [%base_reg + SF_REGS_SZ + PT_I6], %i6;
-
-#define PT_LOAD_GLOBALS(base_reg) \
- ld [%base_reg + SF_REGS_SZ + PT_G1], %g1; \
- ldd [%base_reg + SF_REGS_SZ + PT_G2], %g2; \
- ldd [%base_reg + SF_REGS_SZ + PT_G4], %g4; \
- ldd [%base_reg + SF_REGS_SZ + PT_G6], %g6;
-
-#define PT_LOAD_YREG(base_reg, scratch) \
- ld [%base_reg + SF_REGS_SZ + PT_Y], %scratch; \
- wr %scratch, 0x0, %y;
-
-#define PT_LOAD_PRIV(base_reg, pt_psr, pt_pc, pt_npc) \
- ld [%base_reg + SF_REGS_SZ + PT_PSR], %pt_psr; \
- ld [%base_reg + SF_REGS_SZ + PT_PC], %pt_pc; \
- ld [%base_reg + SF_REGS_SZ + PT_NPC], %pt_npc;
-
-#define PT_LOAD_ALL(base_reg, pt_psr, pt_pc, pt_npc, scratch) \
- PT_LOAD_YREG(base_reg, scratch) \
- PT_LOAD_INS(base_reg) \
- PT_LOAD_GLOBALS(base_reg) \
- PT_LOAD_PRIV(base_reg, pt_psr, pt_pc, pt_npc)
-
-#define PT_STORE_INS(base_reg) \
- std %i0, [%base_reg + SF_REGS_SZ + PT_I0]; \
- std %i2, [%base_reg + SF_REGS_SZ + PT_I2]; \
- std %i4, [%base_reg + SF_REGS_SZ + PT_I4]; \
- std %i6, [%base_reg + SF_REGS_SZ + PT_I6];
-
-#define PT_STORE_GLOBALS(base_reg) \
- st %g1, [%base_reg + SF_REGS_SZ + PT_G1]; \
- std %g2, [%base_reg + SF_REGS_SZ + PT_G2]; \
- std %g4, [%base_reg + SF_REGS_SZ + PT_G4]; \
- std %g6, [%base_reg + SF_REGS_SZ + PT_G6];
-
-#define PT_STORE_YREG(base_reg, scratch) \
- rd %y, %scratch; \
- st %scratch, [%base_reg + SF_REGS_SZ + PT_Y];
-
-#define PT_STORE_PRIV(base_reg, pt_psr, pt_pc, pt_npc) \
- st %pt_psr, [%base_reg + SF_REGS_SZ + PT_PSR]; \
- st %pt_pc, [%base_reg + SF_REGS_SZ + PT_PC]; \
- st %pt_npc, [%base_reg + SF_REGS_SZ + PT_NPC];
-
-#define PT_STORE_ALL(base_reg, reg_psr, reg_pc, reg_npc, g_scratch) \
- PT_STORE_PRIV(base_reg, reg_psr, reg_pc, reg_npc) \
- PT_STORE_GLOBALS(base_reg) \
- PT_STORE_YREG(base_reg, g_scratch) \
- PT_STORE_INS(base_reg)
-
-/* Store the fpu register window*/
-#define FW_STORE(reg) \
- std %f0, [reg + FW_F0]; \
- std %f2, [reg + FW_F2]; \
- std %f4, [reg + FW_F4]; \
- std %f6, [reg + FW_F6]; \
- std %f8, [reg + FW_F8]; \
- std %f10, [reg + FW_F10]; \
- std %f12, [reg + FW_F12]; \
- std %f14, [reg + FW_F14]; \
- std %f16, [reg + FW_F16]; \
- std %f18, [reg + FW_F18]; \
- std %f20, [reg + FW_F20]; \
- std %f22, [reg + FW_F22]; \
- std %f24, [reg + FW_F24]; \
- std %f26, [reg + FW_F26]; \
- std %f28, [reg + FW_F28]; \
- std %f30, [reg + FW_F30]; \
- st %fsr, [reg + FW_FSR];
-
-/* Load a fpu register window from the area beginning at reg. */
-#define FW_LOAD(reg) \
- ldd [reg + FW_F0], %f0; \
- ldd [reg + FW_F2], %f2; \
- ldd [reg + FW_F4], %f4; \
- ldd [reg + FW_F6], %f6; \
- ldd [reg + FW_F8], %f8; \
- ldd [reg + FW_F10], %f10; \
- ldd [reg + FW_F12], %f12; \
- ldd [reg + FW_F14], %f14; \
- ldd [reg + FW_F16], %f16; \
- ldd [reg + FW_F18], %f18; \
- ldd [reg + FW_F20], %f20; \
- ldd [reg + FW_F22], %f22; \
- ldd [reg + FW_F24], %f24; \
- ldd [reg + FW_F26], %f26; \
- ldd [reg + FW_F28], %f28; \
- ldd [reg + FW_F30], %f30; \
- ld [reg + FW_FSR], %fsr;
-
-#endif
diff --git a/common/Kconfig b/common/Kconfig
index 0388a6c34d..440cb372a1 100644
--- a/common/Kconfig
+++ b/common/Kconfig
@@ -455,6 +455,20 @@ endmenu
menu "Misc commands"
+config CMD_AMBAPP
+ bool "ambapp"
+ depends on LEON3
+ default y
+ help
+ Lists AMBA Plug-n-Play information.
+
+config SYS_AMBAPP_PRINT_ON_STARTUP
+ bool "Show AMBA PnP info on startup"
+ depends on CMD_AMBAPP
+ default n
+ help
+ Show AMBA Plug-n-Play information on startup.
+
config CMD_TIME
bool "time"
help
diff --git a/common/board_r.c b/common/board_r.c
index 2270e2ed0f..c6aa7e5224 100644
--- a/common/board_r.c
+++ b/common/board_r.c
@@ -46,6 +46,9 @@
#include <stdio_dev.h>
#include <trace.h>
#include <watchdog.h>
+#ifdef CONFIG_CMD_AMBAPP
+#include <ambapp.h>
+#endif
#ifdef CONFIG_ADDR_MAP
#include <asm/mmu.h>
#endif
@@ -559,6 +562,18 @@ static int initr_status_led(void)
}
#endif
+#if defined(CONFIG_CMD_AMBAPP) && defined(CONFIG_SYS_AMBAPP_PRINT_ON_STARTUP)
+extern int do_ambapp_print(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);
+
+static int initr_ambapp_print(void)
+{
+ puts("AMBA:\n");
+ do_ambapp_print(NULL, 0, 0, NULL);
+
+ return 0;
+}
+#endif
+
#if defined(CONFIG_CMD_SCSI)
static int initr_scsi(void)
{
@@ -850,6 +865,12 @@ init_fnc_t init_sequence_r[] = {
#ifdef CONFIG_BOARD_LATE_INIT
board_late_init,
#endif
+#if defined(CONFIG_CMD_AMBAPP)
+ ambapp_init_reloc,
+#if defined(CONFIG_SYS_AMBAPP_PRINT_ON_STARTUP)
+ initr_ambapp_print,
+#endif
+#endif
#ifdef CONFIG_CMD_SCSI
INIT_FUNC_WATCHDOG_RESET
initr_scsi,
diff --git a/common/cmd_ambapp.c b/common/cmd_ambapp.c
index 2a1995a761..4b6d1741e9 100644
--- a/common/cmd_ambapp.c
+++ b/common/cmd_ambapp.c
@@ -15,92 +15,375 @@
DECLARE_GLOBAL_DATA_PTR;
-/* We put these variables into .data section so that they are zero
- * when entering the AMBA Plug & Play routines (in cpu/cpu/ambapp.c)
- * the first time. BSS is not garantueed to be zero since BSS
- * hasn't been cleared the first times entering the CPU AMBA functions.
- *
- * The AMBA PnP routines call these functions if ambapp_???_print is set.
- *
- */
-int ambapp_apb_print __attribute__ ((section(".data"))) = 0;
-int ambapp_ahb_print __attribute__ ((section(".data"))) = 0;
-
typedef struct {
int device_id;
char *name;
+ char *desc;
} ambapp_device_name;
-static ambapp_device_name gaisler_devices[] = {
- {GAISLER_LEON3, "GAISLER_LEON3"},
- {GAISLER_LEON3DSU, "GAISLER_LEON3DSU"},
- {GAISLER_ETHAHB, "GAISLER_ETHAHB"},
- {GAISLER_ETHMAC, "GAISLER_ETHMAC"},
- {GAISLER_APBMST, "GAISLER_APBMST"},
- {GAISLER_AHBUART, "GAISLER_AHBUART"},
- {GAISLER_SRCTRL, "GAISLER_SRCTRL"},
- {GAISLER_SDCTRL, "GAISLER_SDCTRL"},
- {GAISLER_APBUART, "GAISLER_APBUART"},
- {GAISLER_IRQMP, "GAISLER_IRQMP"},
- {GAISLER_AHBRAM, "GAISLER_AHBRAM"},
- {GAISLER_GPTIMER, "GAISLER_GPTIMER"},
- {GAISLER_PCITRG, "GAISLER_PCITRG"},
- {GAISLER_PCISBRG, "GAISLER_PCISBRG"},
- {GAISLER_PCIFBRG, "GAISLER_PCIFBRG"},
- {GAISLER_PCITRACE, "GAISLER_PCITRACE"},
- {GAISLER_AHBTRACE, "GAISLER_AHBTRACE"},
- {GAISLER_ETHDSU, "GAISLER_ETHDSU"},
- {GAISLER_PIOPORT, "GAISLER_PIOPORT"},
- {GAISLER_AHBJTAG, "GAISLER_AHBJTAG"},
- {GAISLER_ATACTRL, "GAISLER_ATACTRL"},
- {GAISLER_VGA, "GAISLER_VGA"},
- {GAISLER_KBD, "GAISLER_KBD"},
- {GAISLER_L2TIME, "GAISLER_L2TIME"},
- {GAISLER_L2C, "GAISLER_L2C"},
- {GAISLER_PLUGPLAY, "GAISLER_PLUGPLAY"},
- {GAISLER_SPW, "GAISLER_SPW"},
- {GAISLER_SPW2, "GAISLER_SPW2"},
- {GAISLER_EHCI, "GAISLER_EHCI"},
- {GAISLER_UHCI, "GAISLER_UHCI"},
- {GAISLER_AHBSTAT, "GAISLER_AHBSTAT"},
- {GAISLER_DDR2SPA, "GAISLER_DDR2SPA"},
- {GAISLER_DDRSPA, "GAISLER_DDRSPA"},
- {0, NULL}
+typedef struct {
+ unsigned int vendor_id;
+ char *name;
+ char *desc;
+ ambapp_device_name *devices;
+} ambapp_vendor_devnames;
+
+/** Vendor GAISLER devices */
+static ambapp_device_name GAISLER_devices[] = {
+ {GAISLER_LEON2DSU, "LEON2DSU", "Leon2 Debug Support Unit"},
+ {GAISLER_LEON3, "LEON3", "Leon3 SPARC V8 Processor"},
+ {GAISLER_LEON3DSU, "LEON3DSU", "Leon3 Debug Support Unit"},
+ {GAISLER_ETHAHB, "ETHAHB", "OC ethernet AHB interface"},
+ {GAISLER_APBMST, "APBMST", "AHB/APB Bridge"},
+ {GAISLER_AHBUART, "AHBUART", "AHB Debug UART"},
+ {GAISLER_SRCTRL, "SRCTRL", "Simple SRAM Controller"},
+ {GAISLER_SDCTRL, "SDCTRL", "PC133 SDRAM Controller"},
+ {GAISLER_SSRCTRL, "SSRCTRL", "Synchronous SRAM Controller"},
+ {GAISLER_APBUART, "APBUART", "Generic UART"},
+ {GAISLER_IRQMP, "IRQMP", "Multi-processor Interrupt Ctrl."},
+ {GAISLER_AHBRAM, "AHBRAM", "Single-port AHB SRAM module"},
+ {GAISLER_AHBDPRAM, "AHBDPRAM", "Dual-port AHB SRAM module"},
+ {GAISLER_GPTIMER, "GPTIMER", "Modular Timer Unit"},
+ {GAISLER_PCITRG, "PCITRG", "Simple 32-bit PCI Target"},
+ {GAISLER_PCISBRG, "PCISBRG", "Simple 32-bit PCI Bridge"},
+ {GAISLER_PCIFBRG, "PCIFBRG", "Fast 32-bit PCI Bridge"},
+ {GAISLER_PCITRACE, "PCITRACE", "32-bit PCI Trace Buffer"},
+ {GAISLER_DMACTRL, "DMACTRL", "AMBA DMA controller"},
+ {GAISLER_AHBTRACE, "AHBTRACE", "AMBA Trace Buffer"},
+ {GAISLER_DSUCTRL, "DSUCTRL", "DSU/ETH controller"},
+ {GAISLER_CANAHB, "CANAHB", "OC CAN AHB interface"},
+ {GAISLER_GPIO, "GPIO", "General Purpose I/O port"},
+ {GAISLER_AHBROM, "AHBROM", "Generic AHB ROM"},
+ {GAISLER_AHBJTAG, "AHBJTAG", "JTAG Debug Link"},
+ {GAISLER_ETHMAC, "ETHMAC", "GR Ethernet MAC"},
+ {GAISLER_SWNODE, "SWNODE", "SpaceWire Node Interface"},
+ {GAISLER_SPW, "SPW", "SpaceWire Serial Link"},
+ {GAISLER_AHB2AHB, "AHB2AHB", "AHB-to-AHB Bridge"},
+ {GAISLER_USBDC, "USBDC", "GR USB 2.0 Device Controller"},
+ {GAISLER_USB_DCL, "USB_DCL", "USB Debug Communication Link"},
+ {GAISLER_DDRMP, "DDRMP", "Multi-port DDR controller"},
+ {GAISLER_ATACTRL, "ATACTRL", "ATA controller"},
+ {GAISLER_DDRSP, "DDRSP", "Single-port DDR266 controller"},
+ {GAISLER_EHCI, "EHCI", "USB Enhanced Host Controller"},
+ {GAISLER_UHCI, "UHCI", "USB Universal Host Controller"},
+ {GAISLER_I2CMST, "I2CMST", "AMBA Wrapper for OC I2C-master"},
+ {GAISLER_SPW2, "SPW2", "GRSPW2 SpaceWire Serial Link"},
+ {GAISLER_AHBDMA, "AHBDMA", ""},
+ {GAISLER_NUHOSP3, "NUHOSP3", "Nuhorizons Spartan3 IO I/F"},
+ {GAISLER_CLKGATE, "CLKGATE", "Clock gating unit"},
+ {GAISLER_SPICTRL, "SPICTRL", "SPI Controller"},
+ {GAISLER_DDR2SP, "DDR2SP", "Single-port DDR2 controller"},
+ {GAISLER_SLINK, "SLINK", "SLINK Master"},
+ {GAISLER_GRTM, "GRTM", "CCSDS Telemetry Encoder"},
+ {GAISLER_GRTC, "GRTC", "CCSDS Telecommand Decoder"},
+ {GAISLER_GRPW, "GRPW", "PacketWire to AMBA AHB I/F"},
+ {GAISLER_GRCTM, "GRCTM", "CCSDS Time Manager"},
+ {GAISLER_GRHCAN, "GRHCAN", "ESA HurriCANe CAN with DMA"},
+ {GAISLER_GRFIFO, "GRFIFO", "FIFO Controller"},
+ {GAISLER_GRADCDAC, "GRADCDAC", "ADC / DAC Interface"},
+ {GAISLER_GRPULSE, "GRPULSE", "General Purpose I/O with Pulses"},
+ {GAISLER_GRTIMER, "GRTIMER", "Timer Unit with Latches"},
+ {GAISLER_AHB2PP, "AHB2PP", "AMBA AHB to Packet Parallel I/F"},
+ {GAISLER_GRVERSION, "GRVERSION", "Version and Revision Register"},
+ {GAISLER_APB2PW, "APB2PW", "PacketWire Transmit Interface"},
+ {GAISLER_PW2APB, "PW2APB", "PacketWire Receive Interface"},
+ {GAISLER_GRCAN, "GRCAN", "CAN Controller with DMA"},
+ {GAISLER_I2CSLV, "I2CSLV", "I2C Slave"},
+ {GAISLER_U16550, "U16550", "Simple 16550 UART"},
+ {GAISLER_AHBMST_EM, "AHBMST_EM", "AMBA Master Emulator"},
+ {GAISLER_AHBSLV_EM, "AHBSLV_EM", "AMBA Slave Emulator"},
+ {GAISLER_GRTESTMOD, "GRTESTMOD", "Test report module"},
+ {GAISLER_ASCS, "ASCS", "ASCS Master"},
+ {GAISLER_IPMVBCTRL, "IPMVBCTRL", "IPM-bus/MVBC memory controller"},
+ {GAISLER_SPIMCTRL, "SPIMCTRL", "SPI Memory Controller"},
+ {GAISLER_L4STAT, "L4STAT", "Leon4 Statistics Module"},
+ {GAISLER_LEON4, "LEON4", "Leon4 SPARC V8 Processor"},
+ {GAISLER_LEON4DSU, "LEON4DSU", "Leon4 Debug Support Unit"},
+ {GAISLER_PWM, "PWM", "PWM generator"},
+ {GAISLER_L2CACHE, "L2CACHE", "L2-Cache Controller"},
+ {GAISLER_SDCTRL64, "SDCTRL64", "64-bit PC133 SDRAM Controller"},
+ {GAISLER_GR1553B, "GR1553B", "MIL-STD-1553B Interface"},
+ {GAISLER_1553TST, "1553TST", "MIL-STD-1553B Test Device"},
+ {GAISLER_GRIOMMU, "GRIOMMU", "I/O Memory Management Unit"},
+ {GAISLER_FTAHBRAM, "FTAHBRAM", "Generic FT AHB SRAM module"},
+ {GAISLER_FTSRCTRL, "FTSRCTRL", "Simple FT SRAM Controller"},
+ {GAISLER_AHBSTAT, "AHBSTAT", "AHB Status Register"},
+ {GAISLER_LEON3FT, "LEON3FT", "Leon3-FT SPARC V8 Processor"},
+ {GAISLER_FTMCTRL, "FTMCTRL", "Memory controller with EDAC"},
+ {GAISLER_FTSDCTRL, "FTSDCTRL", "FT PC133 SDRAM Controller"},
+ {GAISLER_FTSRCTRL8, "FTSRCTRL8", "FT 8-bit SRAM/16-bit IO Ctrl"},
+ {GAISLER_MEMSCRUB, "MEMSCRUB", "AHB Memory Scrubber"},
+ {GAISLER_FTSDCTRL64, "FTSDCTRL64", "64-bit FT SDRAM Controller"},
+ {GAISLER_APBPS2, "APBPS2", "PS2 interface"},
+ {GAISLER_VGACTRL, "VGACTRL", "VGA controller"},
+ {GAISLER_LOGAN, "LOGAN", "On chip Logic Analyzer"},
+ {GAISLER_SVGACTRL, "SVGACTRL", "SVGA frame buffer"},
+ {GAISLER_T1AHB, "T1AHB", "Niagara T1 PCX/AHB bridge"},
+ {GAISLER_MP7WRAP, "MP7WRAP", "CoreMP7 wrapper"},
+ {GAISLER_GRSYSMON, "GRSYSMON", "AMBA wrapper for System Monitor"},
+ {GAISLER_GRACECTRL, "GRACECTRL", "System ACE I/F Controller"},
+ {GAISLER_ATAHBSLV, "ATAHBSLV", "AMBA Test Framework AHB Slave"},
+ {GAISLER_ATAHBMST, "ATAHBMST", "AMBA Test Framework AHB Master"},
+ {GAISLER_ATAPBSLV, "ATAPBSLV", "AMBA Test Framework APB Slave"},
+ {GAISLER_B1553BC, "B1553BC", "AMBA Wrapper for Core1553BBC"},
+ {GAISLER_B1553RT, "B1553RT", "AMBA Wrapper for Core1553BRT"},
+ {GAISLER_B1553BRM, "B1553BRM", "AMBA Wrapper for Core1553BRM"},
+ {GAISLER_AES, "AES", "Advanced Encryption Standard"},
+ {GAISLER_ECC, "ECC", "Elliptic Curve Cryptography"},
+ {GAISLER_PCIF, "PCIF", "AMBA Wrapper for CorePCIF"},
+ {GAISLER_CLKMOD, "CLKMOD", "CPU Clock Switching Ctrl module"},
+ {GAISLER_HAPSTRAK, "HAPSTRAK", "HAPS HapsTrak I/O Port"},
+ {GAISLER_TEST_1X2, "TEST_1X2", "HAPS TEST_1x2 interface"},
+ {GAISLER_WILD2AHB, "WILD2AHB", "WildCard CardBus interface"},
+ {GAISLER_BIO1, "BIO1", "Basic I/O board BIO1"},
+ {GAISLER_AESDMA, "AESDMA", "AES 256 DMA"},
+ {GAISLER_SATCAN, "SATCAN", "SatCAN controller"},
+ {GAISLER_CANMUX, "CANMUX", "CAN Bus multiplexer"},
+ {GAISLER_GRTMRX, "GRTMRX", "CCSDS Telemetry Receiver"},
+ {GAISLER_GRTCTX, "GRTCTX", "CCSDS Telecommand Transmitter"},
+ {GAISLER_GRTMDESC, "GRTMDESC", "CCSDS Telemetry Descriptor"},
+ {GAISLER_GRTMVC, "GRTMVC", "CCSDS Telemetry VC Generator"},
+ {GAISLER_GEFFE, "GEFFE", "Geffe Generator"},
+ {GAISLER_GPREG, "GPREG", "General Purpose Register"},
+ {GAISLER_GRTMPAHB, "GRTMPAHB", "CCSDS Telemetry VC AHB Input"},
+ {GAISLER_SPWCUC, "SPWCUC", "CCSDS CUC / SpaceWire I/F"},
+ {GAISLER_SPW2_DMA, "SPW2_DMA", "GRSPW Router DMA interface"},
+ {GAISLER_SPWROUTER, "SPWROUTER", "GRSPW Router"},
+ {0, NULL, NULL}
};
-static ambapp_device_name esa_devices[] = {
- {ESA_LEON2, "ESA_LEON2"},
- {ESA_MCTRL, "ESA_MCTRL"},
- {0, NULL}
+
+/** Vendor PENDER devices */
+static ambapp_device_name PENDER_devices[] = {
+ {0, NULL, NULL}
};
-static ambapp_device_name opencores_devices[] = {
- {OPENCORES_PCIBR, "OPENCORES_PCIBR"},
- {OPENCORES_ETHMAC, "OPENCORES_ETHMAC"},
+
+/** Vendor ESA devices */
+static ambapp_device_name ESA_devices[] = {
+ {ESA_LEON2, "LEON2", "Leon2 SPARC V8 Processor"},
+ {ESA_LEON2APB, "LEON2APB", "Leon2 Peripheral Bus"},
+ {ESA_IRQ, "IRQ", "Leon2 Interrupt Controller"},
+ {ESA_TIMER, "TIMER", "Leon2 Timer"},
+ {ESA_UART, "UART", "Leon2 UART"},
+ {ESA_CFG, "CFG", "Leon2 Configuration Register"},
+ {ESA_IO, "IO", "Leon2 Input/Output"},
+ {ESA_MCTRL, "MCTRL", "Leon2 Memory Controller"},
+ {ESA_PCIARB, "PCIARB", "PCI Arbiter"},
+ {ESA_HURRICANE, "HURRICANE", "HurriCANe/HurryAMBA CAN Ctrl"},
+ {ESA_SPW_RMAP, "SPW_RMAP", "UoD/Saab SpaceWire/RMAP link"},
+ {ESA_AHBUART, "AHBUART", "Leon2 AHB Debug UART"},
+ {ESA_SPWA, "SPWA", "ESA/ASTRIUM SpaceWire link"},
+ {ESA_BOSCHCAN, "BOSCHCAN", "SSC/BOSCH CAN Ctrl"},
+ {ESA_IRQ2, "IRQ2", "Leon2 Secondary Irq Controller"},
+ {ESA_AHBSTAT, "AHBSTAT", "Leon2 AHB Status Register"},
+ {ESA_WPROT, "WPROT", "Leon2 Write Protection"},
+ {ESA_WPROT2, "WPROT2", "Leon2 Extended Write Protection"},
+ {ESA_PDEC3AMBA, "PDEC3AMBA", "ESA CCSDS PDEC3AMBA TC Decoder"},
+ {ESA_PTME3AMBA, "PTME3AMBA", "ESA CCSDS PTME3AMBA TM Encoder"},
+ {0, NULL, NULL}
+};
+
+
+/** Vendor ASTRIUM devices */
+static ambapp_device_name ASTRIUM_devices[] = {
+ {0, NULL, NULL}
+};
+
+
+/** Vendor OPENCHIP devices */
+static ambapp_device_name OPENCHIP_devices[] = {
+ {OPENCHIP_APBGPIO, "APBGPIO", "APB General Purpose IO"},
+ {OPENCHIP_APBI2C, "APBI2C", "APB I2C Interface"},
+ {OPENCHIP_APBSPI, "APBSPI", "APB SPI Interface"},
+ {OPENCHIP_APBCHARLCD, "APBCHARLCD", "APB Character LCD"},
+ {OPENCHIP_APBPWM, "APBPWM", "APB PWM"},
+ {OPENCHIP_APBPS2, "APBPS2", "APB PS/2 Interface"},
+ {OPENCHIP_APBMMCSD, "APBMMCSD", "APB MMC/SD Card Interface"},
+ {OPENCHIP_APBNAND, "APBNAND", "APB NAND(SmartMedia) Interface"},
+ {OPENCHIP_APBLPC, "APBLPC", "APB LPC Interface"},
+ {OPENCHIP_APBCF, "APBCF", "APB CompactFlash (IDE)"},
+ {OPENCHIP_APBSYSACE, "APBSYSACE", "APB SystemACE Interface"},
+ {OPENCHIP_APB1WIRE, "APB1WIRE", "APB 1-Wire Interface"},
+ {OPENCHIP_APBJTAG, "APBJTAG", "APB JTAG TAP Master"},
+ {OPENCHIP_APBSUI, "APBSUI", "APB Simple User Interface"},
+ {0, NULL, NULL}
+};
+
+
+/** Vendor OPENCORES devices */
+static ambapp_device_name OPENCORES_devices[] = {
+ {OPENCORES_PCIBR, "PCIBR", "PCI Bridge"},
+ {OPENCORES_ETHMAC, "ETHMAC", "Ethernet MAC"},
{0, NULL}
};
-typedef struct {
- unsigned int vendor_id;
- char *name;
- ambapp_device_name *devices;
-} ambapp_vendor_devnames;
+/** Vendor CONTRIB devices */
+static ambapp_device_name CONTRIB_devices[] = {
+ {CONTRIB_CORE1, "CORE1", "Contributed core 1"},
+ {CONTRIB_CORE2, "CORE2", "Contributed core 2"},
+ {0, NULL, NULL}
+};
+
+
+/** Vendor EONIC devices */
+static ambapp_device_name EONIC_devices[] = {
+ {0, NULL, NULL}
+};
+
+
+/** Vendor RADIONOR devices */
+static ambapp_device_name RADIONOR_devices[] = {
+ {0, NULL, NULL}
+};
+
+
+/** Vendor GLEICHMANN devices */
+static ambapp_device_name GLEICHMANN_devices[] = {
+ {GLEICHMANN_CUSTOM, "CUSTOM", "Custom device"},
+ {GLEICHMANN_GEOLCD01, "GEOLCD01", "GEOLCD01 graphics system"},
+ {GLEICHMANN_DAC, "DAC", "Sigma delta DAC"},
+ {GLEICHMANN_HPI, "HPI", "AHB-to-HPI bridge"},
+ {GLEICHMANN_SPI, "SPI", "SPI master"},
+ {GLEICHMANN_HIFC, "HIFC", "Human interface controller"},
+ {GLEICHMANN_ADCDAC, "ADCDAC", "Sigma delta ADC/DAC"},
+ {GLEICHMANN_SPIOC, "SPIOC", ""},
+ {GLEICHMANN_AC97, "AC97", ""},
+ {0, NULL, NULL}
+};
+
+
+/** Vendor MENTA devices */
+static ambapp_device_name MENTA_devices[] = {
+ {0, NULL, NULL}
+};
+
+
+/** Vendor SUN devices */
+static ambapp_device_name SUN_devices[] = {
+ {SUN_T1, "T1", "Niagara T1 SPARC V9 Processor"},
+ {SUN_S1, "S1", "Niagara S1 SPARC V9 Processor"},
+ {0, NULL, NULL}
+};
+
+
+/** Vendor MOVIDIA devices */
+static ambapp_device_name MOVIDIA_devices[] = {
+ {0, NULL, NULL}
+};
+
+
+/** Vendor ORBITA devices */
+static ambapp_device_name ORBITA_devices[] = {
+ {ORBITA_1553B, "1553B", "MIL-STD-1553B Controller"},
+ {ORBITA_429, "429", "429 Interface"},
+ {ORBITA_SPI, "SPI", "SPI Interface"},
+ {ORBITA_I2C, "I2C", "I2C Interface"},
+ {ORBITA_SMARTCARD, "SMARTCARD", "Smart Card Reader"},
+ {ORBITA_SDCARD, "SDCARD", "SD Card Reader"},
+ {ORBITA_UART16550, "UART16550", "16550 UART"},
+ {ORBITA_CRYPTO, "CRYPTO", "Crypto Engine"},
+ {ORBITA_SYSIF, "SYSIF", "System Interface"},
+ {ORBITA_PIO, "PIO", "Programmable IO module"},
+ {ORBITA_RTC, "RTC", "Real-Time Clock"},
+ {ORBITA_COLORLCD, "COLORLCD", "Color LCD Controller"},
+ {ORBITA_PCI, "PCI", "PCI Module"},
+ {ORBITA_DSP, "DSP", "DPS Co-Processor"},
+ {ORBITA_USBHOST, "USBHOST", "USB Host"},
+ {ORBITA_USBDEV, "USBDEV", "USB Device"},
+ {0, NULL, NULL}
+};
+
+
+/** Vendor SYNOPSYS devices */
+static ambapp_device_name SYNOPSYS_devices[] = {
+ {0, NULL, NULL}
+};
+
+
+/** Vendor NASA devices */
+static ambapp_device_name NASA_devices[] = {
+ {NASA_EP32, "EP32", "EP32 Forth processor"},
+ {0, NULL, NULL}
+};
+
+
+/** Vendor CAL devices */
+static ambapp_device_name CAL_devices[] = {
+ {CAL_DDRCTRL, "DDRCTRL", ""},
+ {0, NULL, NULL}
+};
+
+
+/** Vendor EMBEDDIT devices */
+static ambapp_device_name EMBEDDIT_devices[] = {
+ {0, NULL, NULL}
+};
+
+
+/** Vendor CETON devices */
+static ambapp_device_name CETON_devices[] = {
+ {0, NULL, NULL}
+};
+
+
+/** Vendor S3 devices */
+static ambapp_device_name S3_devices[] = {
+ {0, NULL, NULL}
+};
+
+
+/** Vendor ACTEL devices */
+static ambapp_device_name ACTEL_devices[] = {
+ {ACTEL_COREMP7, "COREMP7", "CoreMP7 Processor"},
+ {0, NULL, NULL}
+};
+
+
+/** Vendor APPLECORE devices */
+static ambapp_device_name APPLECORE_devices[] = {
+ {APPLECORE_UTLEON3, "UTLEON3", "AppleCore uT-LEON3 Processor"},
+ {APPLECORE_UTLEON3DSU, "UTLEON3DSU", "AppleCore uT-LEON3 DSU"},
+ {0, NULL, NULL}
+};
+
+
+/** Vendors and their devices */
static ambapp_vendor_devnames vendors[] = {
- {VENDOR_GAISLER, "VENDOR_GAISLER", gaisler_devices},
- {VENDOR_ESA, "VENDOR_ESA", esa_devices},
- {VENDOR_OPENCORES, "VENDOR_OPENCORES", opencores_devices},
- {0, NULL, 0}
+ {VENDOR_GAISLER, "GAISLER", "Gaisler Research", GAISLER_devices},
+ {VENDOR_PENDER, "PENDER", "", PENDER_devices},
+ {VENDOR_ESA, "ESA", "European Space Agency", ESA_devices},
+ {VENDOR_ASTRIUM, "ASTRIUM", "", ASTRIUM_devices},
+ {VENDOR_OPENCHIP, "OPENCHIP", "OpenChip", OPENCHIP_devices},
+ {VENDOR_OPENCORES, "OPENCORES", "OpenCores", OPENCORES_devices},
+ {VENDOR_CONTRIB, "CONTRIB", "Various contributions", CONTRIB_devices},
+ {VENDOR_EONIC, "EONIC", "Eonic BV", EONIC_devices},
+ {VENDOR_RADIONOR, "RADIONOR", "Radionor Communications", RADIONOR_devices},
+ {VENDOR_GLEICHMANN, "GLEICHMANN", "Gleichmann Electronics", GLEICHMANN_devices},
+ {VENDOR_MENTA, "MENTA", "Menta", MENTA_devices},
+ {VENDOR_SUN, "SUN", "Sun Microsystems", SUN_devices},
+ {VENDOR_MOVIDIA, "MOVIDIA", "", MOVIDIA_devices},
+ {VENDOR_ORBITA, "ORBITA", "Orbita", ORBITA_devices},
+ {VENDOR_SYNOPSYS, "SYNOPSYS", "Synopsys Inc.", SYNOPSYS_devices},
+ {VENDOR_NASA, "NASA", "NASA", NASA_devices},
+ {VENDOR_S3, "S3", "S3 Group", S3_devices},
+ {VENDOR_CAL, "CAL", "", CAL_devices},
+ {VENDOR_EMBEDDIT, "EMBEDDIT", "Embedd.it", EMBEDDIT_devices},
+ {VENDOR_CETON, "CETON", "Ceton Corporation", CETON_devices},
+ {VENDOR_ACTEL, "ACTEL", "Actel Corporation", ACTEL_devices},
+ {VENDOR_APPLECORE, "APPLECORE", "AppleCore", APPLECORE_devices},
+ {0, NULL, NULL, NULL}
};
-static char *ambapp_get_devname(ambapp_device_name * devs, int id)
+static ambapp_device_name *ambapp_get_dev(ambapp_device_name *devs, int id)
{
if (!devs)
return NULL;
while (devs->device_id > 0) {
if (devs->device_id == id)
- return devs->name;
+ return devs;
devs++;
}
return NULL;
@@ -109,10 +392,31 @@ static char *ambapp_get_devname(ambapp_device_name * devs, int id)
char *ambapp_device_id2str(int vendor, int id)
{
ambapp_vendor_devnames *ven = &vendors[0];
+ ambapp_device_name *dev;
+
+ while (ven->vendor_id > 0) {
+ if (ven->vendor_id == vendor) {
+ dev = ambapp_get_dev(ven->devices, id);
+ if (!dev)
+ return NULL;
+ return dev->name;
+ }
+ ven++;
+ }
+ return NULL;
+}
+
+char *ambapp_device_id2desc(int vendor, int id)
+{
+ ambapp_vendor_devnames *ven = &vendors[0];
+ ambapp_device_name *dev;
while (ven->vendor_id > 0) {
if (ven->vendor_id == vendor) {
- return ambapp_get_devname(ven->devices, id);
+ dev = ambapp_get_dev(ven->devices, id);
+ if (!dev)
+ return NULL;
+ return dev->desc;
}
ven++;
}
@@ -134,101 +438,106 @@ char *ambapp_vendor_id2str(int vendor)
static char *unknown = "unknown";
+char *ambapp_type_names[4] = {
+ /* 0 */ "UNUSED",
+ /* 1 */ "apb",
+ /* 2 */ "ahbmem",
+ /* 3 */ "ahbio"
+};
+
/* Print one APB device */
-void ambapp_print_apb(apbctrl_pp_dev * apb, ambapp_ahbdev * apbmst, int index)
+void ambapp_print_apb(ambapp_apbdev *dev, int index)
{
char *dev_str, *ven_str;
- int irq, ver, vendor, deviceid;
- unsigned int address, apbmst_base, mask;
-
- vendor = amba_vendor(apb->conf);
- deviceid = amba_device(apb->conf);
- irq = amba_irq(apb->conf);
- ver = amba_ver(apb->conf);
- apbmst_base = apbmst->address[0] & LEON3_IO_AREA;
- address = (apbmst_base | (((apb->bar & 0xfff00000) >> 12))) &
- (((apb->bar & 0x0000fff0) << 4) | 0xfff00000);
+ unsigned int freq;
- mask = amba_membar_mask(apb->bar) << 8;
- mask = ((~mask) & 0x000fffff) + 1;
-
- ven_str = ambapp_vendor_id2str(vendor);
+ ven_str = ambapp_vendor_id2str(dev->vendor);
if (!ven_str) {
ven_str = unknown;
dev_str = unknown;
} else {
- dev_str = ambapp_device_id2str(vendor, deviceid);
+ dev_str = ambapp_device_id2str(dev->vendor, dev->device);
if (!dev_str)
dev_str = unknown;
}
- printf("0x%02x:0x%02x:0x%02x: %s %s\n"
+ /* Get Frequency of Core */
+ freq = ambapp_bus_freq(&ambapp_plb, dev->ahb_bus_index);
+
+ printf("0x%02x:0x%02x:0x%02x: %s %s (%dkHz)\n"
" apb: 0x%08x - 0x%08x\n"
" irq: %-2d (ver: %-2d)\n",
- index, vendor, deviceid, ven_str, dev_str, address,
- address + mask, irq, ver);
+ index, dev->vendor, dev->device, ven_str, dev_str, freq / 1000,
+ dev->address, dev->address + (dev->mask-1),
+ dev->irq, dev->ver);
}
-void ambapp_print_ahb(ahbctrl_pp_dev * ahb, int index)
+void ambapp_print_ahb(ambapp_ahbdev *dev, int index)
{
- char *dev_str, *ven_str;
- int irq, ver, vendor, deviceid;
- unsigned int addr, mask;
- int j;
+ char *dev_str, *ven_str, *type_str;
+ int i;
+ unsigned int freq;
- vendor = amba_vendor(ahb->conf);
- deviceid = amba_device(ahb->conf);
- irq = amba_irq(ahb->conf);
- ver = amba_ver(ahb->conf);
-
- ven_str = ambapp_vendor_id2str(vendor);
+ ven_str = ambapp_vendor_id2str(dev->vendor);
if (!ven_str) {
ven_str = unknown;
dev_str = unknown;
} else {
- dev_str = ambapp_device_id2str(vendor, deviceid);
+ dev_str = ambapp_device_id2str(dev->vendor, dev->device);
if (!dev_str)
dev_str = unknown;
}
- printf("0x%02x:0x%02x:0x%02x: %s %s\n",
- index, vendor, deviceid, ven_str, dev_str);
+ /* Get Frequency of Core */
+ freq = ambapp_bus_freq(&ambapp_plb, dev->ahb_bus_index);
+
+ printf("0x%02x:0x%02x:0x%02x: %s %s (%dkHz)\n",
+ index, dev->vendor, dev->device, ven_str, dev_str, freq / 1000);
- for (j = 0; j < 4; j++) {
- addr = amba_membar_start(ahb->bars[j]);
- if (amba_membar_type(ahb->bars[j]) == 0)
+ for (i = 0; i < 4; i++) {
+ if (dev->type[i] == 0)
continue;
- if (amba_membar_type(ahb->bars[j]) == AMBA_TYPE_AHBIO)
- addr = AMBA_TYPE_AHBIO_ADDR(addr);
- mask = amba_membar_mask(ahb->bars[j]) << 20;
- printf(" mem: 0x%08x - 0x%08x\n", addr, addr + ((~mask) + 1));
+ type_str = ambapp_type_names[dev->type[i]];
+ printf(" %-7s: 0x%08x - 0x%08x\n", type_str, dev->address[i],
+ dev->address[i] + (dev->mask[i]-1));
}
- printf(" irq: %-2d (ver: %d)\n", irq, ver);
+ printf(" irq: %-2d (ver: %d)\n", dev->irq, dev->ver);
}
int do_ambapp_print(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
{
+ int index;
+ ambapp_apbdev apbdev;
+ ambapp_ahbdev ahbdev;
/* Print AHB Masters */
- puts("--------- AHB Masters ---------\n");
- ambapp_apb_print = 0;
- ambapp_ahb_print = 1;
- ambapp_ahbmst_count(99, 99); /* Get vendor&device 99 = nonexistent... */
+ puts("\n--------- AHB Masters ---------\n");
+ index = 0;
+ while (ambapp_ahbmst_find(&ambapp_plb, 0, 0, index, &ahbdev) == 1) {
+ /* Found a AHB Master Device */
+ ambapp_print_ahb(&ahbdev, index);
+ index++;
+ }
/* Print AHB Slaves */
- puts("--------- AHB Slaves ---------\n");
- ambapp_ahbslv_count(99, 99); /* Get vendor&device 99 = nonexistent... */
+ puts("\n--------- AHB Slaves ---------\n");
+ index = 0;
+ while (ambapp_ahbslv_find(&ambapp_plb, 0, 0, index, &ahbdev) == 1) {
+ /* Found a AHB Slave Device */
+ ambapp_print_ahb(&ahbdev, index);
+ index++;
+ }
/* Print APB Slaves */
- puts("--------- APB Slaves ---------\n");
- ambapp_apb_print = 1;
- ambapp_ahb_print = 0;
- ambapp_apb_count(99, 99); /* Get vendor&device 99 = nonexistent... */
-
- /* Reset, no futher printing */
- ambapp_apb_print = 0;
- ambapp_ahb_print = 0;
+ puts("\n--------- APB Slaves ---------\n");
+ index = 0;
+ while (ambapp_apb_find(&ambapp_plb, 0, 0, index, &apbdev) == 1) {
+ /* Found a APB Slave Device */
+ ambapp_print_apb(&apbdev, index);
+ index++;
+ }
+
puts("\n");
return 0;
}
@@ -240,16 +549,18 @@ int ambapp_init_reloc(void)
while (vend->vendor_id && vend->name) {
vend->name = (char *)((unsigned int)vend->name + gd->reloc_off);
- vend->devices =
- (ambapp_device_name *) ((unsigned int)vend->devices +
- gd->reloc_off);;
+ vend->desc = (char *)((unsigned int)vend->desc + gd->reloc_off);
+ vend->devices = (ambapp_device_name *)
+ ((unsigned int)vend->devices + gd->reloc_off);
dev = vend->devices;
vend++;
if (!dev)
continue;
while (dev->device_id && dev->name) {
dev->name =
- (char *)((unsigned int)dev->name + gd->reloc_off);;
+ (char *)((unsigned int)dev->name + gd->reloc_off);
+ dev->desc =
+ (char *)((unsigned int)dev->desc + gd->reloc_off);
dev++;
}
}
diff --git a/configs/grsim_defconfig b/configs/grsim_defconfig
index f0fa23f810..d2f709f834 100644
--- a/configs/grsim_defconfig
+++ b/configs/grsim_defconfig
@@ -11,4 +11,10 @@ CONFIG_SYS_TEXT_BASE=0x00000000
# CONFIG_CMD_MEMORY is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_SETEXPR is not set
+# CONFIG_CMD_NET is not set
# CONFIG_CMD_NFS is not set
+CONFIG_SYS_AMBAPP_PRINT_ON_STARTUP=y
+CONFIG_DEBUG_UART=y
+CONFIG_DEBUG_UART_APBUART=y
+CONFIG_DEBUG_UART_BASE=0x80000100
+CONFIG_DEBUG_UART_CLOCK=40000000
diff --git a/doc/git-mailrc b/doc/git-mailrc
index 6fe78a1d08..1b26e232d2 100644
--- a/doc/git-mailrc
+++ b/doc/git-mailrc
@@ -106,7 +106,7 @@ alias ppc4xx uboot, stroese
alias sandbox sjg
alias sb sandbox
-alias sparc uboot, Daniel Hellstrom <daniel@gaisler.com>
+alias sparc uboot, Francois Retief <fgretief@spaceteq.co.za>
alias superh uboot, iwamatsu
alias sh superh
diff --git a/drivers/net/greth.c b/drivers/net/greth.c
index 9bc8a8d1aa..0624eb8cac 100644
--- a/drivers/net/greth.c
+++ b/drivers/net/greth.c
@@ -20,7 +20,7 @@
#include <ambapp.h>
#include <asm/leon.h>
-#include "greth.h"
+#include <grlib/greth.h>
/* Default to 3s timeout on autonegotiation */
#ifndef GRETH_PHY_TIMEOUT_MS
@@ -34,6 +34,13 @@
#define GRETH_PHY_ADR_DEFAULT 0
#endif
+/* Let board select which GRETH to use as network interface, set
+ * this to zero if only one GRETH is available.
+ */
+#ifndef CONFIG_SYS_GRLIB_GRETH_INDEX
+#define CONFIG_SYS_GRLIB_GRETH_INDEX 0
+#endif
+
/* ByPass Cache when reading regs */
#define GRETH_REGLOAD(addr) SPARC_NOCACHE_READ(addr)
/* Write-through cache ==> no bypassing needed on writes */
@@ -593,8 +600,12 @@ int greth_initialize(bd_t * bis)
debug("Scanning for GRETH\n");
- /* Find Device & IRQ via AMBA Plug&Play information */
- if (ambapp_apb_first(VENDOR_GAISLER, GAISLER_ETHMAC, &apbdev) != 1) {
+ /* Find Device & IRQ via AMBA Plug&Play information,
+ * CONFIG_SYS_GRLIB_GRETH_INDEX select which GRETH if multiple
+ * GRETHs in system.
+ */
+ if (ambapp_apb_find(&ambapp_plb, VENDOR_GAISLER, GAISLER_ETHMAC,
+ CONFIG_SYS_GRLIB_GRETH_INDEX, &apbdev) != 1) {
return -1; /* GRETH not found */
}
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index d462244a04..eba96f4a80 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -98,6 +98,14 @@ config DEBUG_UART_ZYNQ
will need to provide parameters to make this work. The driver will
be available until the real driver-model serial is running.
+config DEBUG_UART_APBUART
+ depends on LEON3
+ bool "Gaisler APBUART"
+ help
+ Select this to enable a debug UART using the serial_leon3 driver. You
+ will need to provide parameters to make this work. The driver will
+ be available until the real driver model serial is running.
+
endchoice
config DEBUG_UART_BASE
diff --git a/include/ambapp.h b/include/ambapp.h
index 405637d8cd..d79fcedb41 100644
--- a/include/ambapp.h
+++ b/include/ambapp.h
@@ -3,8 +3,8 @@
* the APB bus, also freely available in GRLIB at
* www.gaisler.com.
*
- * (C) Copyright 2007
- * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com.
+ * (C) Copyright 2009, 2015
+ * Daniel Hellstrom, Cobham Gaisler, daniel@gaisler.com.
*
* SPDX-License-Identifier: GPL-2.0+
*/
@@ -12,366 +12,214 @@
#ifndef __AMBAPP_H__
#define __AMBAPP_H__
-/* Default location of Plug&Play info
- * normally 0xfffff000 for AHB masters
- * and 0xfffff800 for AHB slaves.
- * Normally no need to change this.
- */
-#define LEON3_IO_AREA 0xfff00000
-#define LEON3_CONF_AREA 0xff000
-#define LEON3_AHB_SLAVE_CONF_AREA (1 << 11)
-
-/* Max devices this software will support */
-#define LEON3_AHB_MASTERS 16
-#define LEON3_AHB_SLAVES 16
-/*#define LEON3_APB_MASTERS 1*/ /* Number of APB buses that has Plug&Play */
-#define LEON3_APB_SLAVES 16 /* Total number of APB slaves per APB bus */
-
-/* Vendor codes */
-#define VENDOR_GAISLER 1
-#define VENDOR_PENDER 2
-#define VENDOR_ESA 4
-#define VENDOR_ASTRIUM 6
-#define VENDOR_OPENCHIP 7
-#define VENDOR_OPENCORES 8
-#define VENDOR_CONTRIB 9
-#define VENDOR_EONIC 11
-#define VENDOR_RADIONOR 15
-#define VENDOR_GLEICHMANN 16
-#define VENDOR_MENTA 17
-#define VENDOR_SUN 19
-#define VENDOR_EMBEDDIT 234
-#define VENDOR_CAL 202
-
-/* Gaisler Research device id's */
-#define GAISLER_LEON3 0x003
-#define GAISLER_LEON3DSU 0x004
-#define GAISLER_ETHAHB 0x005
-#define GAISLER_APBMST 0x006
-#define GAISLER_AHBUART 0x007
-#define GAISLER_SRCTRL 0x008
-#define GAISLER_SDCTRL 0x009
-#define GAISLER_APBUART 0x00C
-#define GAISLER_IRQMP 0x00D
-#define GAISLER_AHBRAM 0x00E
-#define GAISLER_GPTIMER 0x011
-#define GAISLER_PCITRG 0x012
-#define GAISLER_PCISBRG 0x013
-#define GAISLER_PCIFBRG 0x014
-#define GAISLER_PCITRACE 0x015
-#define GAISLER_PCIDMA 0x016
-#define GAISLER_AHBTRACE 0x017
-#define GAISLER_ETHDSU 0x018
-#define GAISLER_PIOPORT 0x01A
-#define GAISLER_AHBJTAG 0x01c
-#define GAISLER_SPW 0x01f
-#define GAISLER_ATACTRL 0x024
-#define GAISLER_VGA 0x061
-#define GAISLER_KBD 0X060
-#define GAISLER_ETHMAC 0x01D
-#define GAISLER_DDRSPA 0x025
-#define GAISLER_EHCI 0x026
-#define GAISLER_UHCI 0x027
-#define GAISLER_SPW2 0x029
-#define GAISLER_DDR2SPA 0x02E
-#define GAISLER_AHBSTAT 0x052
-#define GAISLER_FTMCTRL 0x054
-
-#define GAISLER_L2TIME 0xffd /* internal device: leon2 timer */
-#define GAISLER_L2C 0xffe /* internal device: leon2compat */
-#define GAISLER_PLUGPLAY 0xfff /* internal device: plug & play configarea */
-
-/* European Space Agency device id's */
-#define ESA_LEON2 0x2
-#define ESA_MCTRL 0xF
-
-/* Opencores device id's */
-#define OPENCORES_PCIBR 0x4
-#define OPENCORES_ETHMAC 0x5
-
-/* Vendor codes */
-
-/*
- *
- * Macros for manipulating Configuration registers
- *
- */
-
-#define amba_vendor(x) (((x) >> 24) & 0xff)
-
-#define amba_device(x) (((x) >> 12) & 0xfff)
-
-#define amba_membar_start(mbar) \
- (((mbar) & 0xfff00000) & (((mbar) & 0xfff0) << 16))
-
-#define amba_iobar_start(base, iobar) \
- ((base) | ((((iobar) & 0xfff00000)>>12) & (((iobar) & 0xfff0)<<4)) )
-
-#define amba_irq(conf) ((conf) & 0xf)
-
-#define amba_ver(conf) (((conf)>>5) & 0x1f)
-
-#define amba_membar_type(mbar) ((mbar) & 0xf)
-
-#define amba_membar_mask(mbar) (((mbar)>>4) & 0xfff)
-
-#define AMBA_TYPE_APBIO 0x1
-#define AMBA_TYPE_MEM 0x2
-#define AMBA_TYPE_AHBIO 0x3
-
-#define AMBA_TYPE_AHBIO_ADDR(addr) (LEON3_IO_AREA | ((addr) >> 12))
+#include <ambapp_ids.h>
#ifndef __ASSEMBLER__
+/* Structures used to access Plug&Play information directly */
+struct ambapp_pnp_ahb {
+ const unsigned int id; /* VENDOR, DEVICE, VER, IRQ, */
+ const unsigned int custom[3];
+ const unsigned int mbar[4]; /* MASK, ADDRESS, TYPE,
+ * CACHABLE/PREFETCHABLE */
+};
+
+struct ambapp_pnp_apb {
+ const unsigned int id; /* VENDOR, DEVICE, VER, IRQ, */
+ const unsigned int iobar; /* MASK, ADDRESS, TYPE,
+ * CACHABLE/PREFETCHABLE */
+};
-#ifdef CONFIG_CMD_AMBAPP
-
-/* AMBA Plug&Play relocation & initialization */
-int ambapp_init_reloc(void);
-
-/* AMBA Plug&Play Name of Vendors and devices */
-
-/* Return name of device */
-char *ambapp_device_id2str(int vendor, int id);
-
-/* Return name of vendor */
-char *ambapp_vendor_id2str(int vendor);
-#endif
-
-/*
- * Types and structure used for AMBA Plug & Play bus scanning
- */
-
-/* AMBA Plug&Play AHB information layout */
-typedef struct {
- unsigned int conf;
- unsigned int userdef[3];
- unsigned int bars[4];
-} ahbctrl_pp_dev;
-
-/* Prototypes for scanning AMBA Plug&Play bus for AMBA
- * i) AHB Masters
- * ii) AHB Slaves
- * iii) APB Slaves (APB MST is a AHB Slave)
+/* AMBA Plug&Play AHB Masters & Slaves information locations
+ * Max devices is 64 supported by HW, however often only 16
+ * are used.
*/
-
-typedef struct {
+struct ambapp_pnp_info {
+ struct ambapp_pnp_ahb masters[64];
+ struct ambapp_pnp_ahb slaves[63];
+ const unsigned int unused[4];
+ const unsigned int systemid[4];
+};
+
+/* Describes a AMBA PnP bus */
+struct ambapp_bus {
+ int buses; /* Number of buses */
+ unsigned int ioareas[6]; /* PnP I/O AREAs of AHB buses */
+ unsigned int freq; /* Frequency of bus0 [Hz] */
+};
+
+/* Processor Local AMBA bus */
+extern struct ambapp_bus ambapp_plb;
+
+/* Get Bus frequency of a certain AMBA bus */
+extern unsigned int ambapp_bus_freq(
+ struct ambapp_bus *abus,
+ int ahb_bus_index
+ );
+
+/* AMBA PnP information of a APB Device */
+typedef struct {
+ unsigned int vendor;
+ unsigned int device;
unsigned char irq;
unsigned char ver;
unsigned int address;
+ unsigned int mask;
+ int ahb_bus_index;
} ambapp_apbdev;
+/* AMBA PnP information of a AHB Device */
typedef struct {
+ unsigned int vendor;
+ unsigned int device;
unsigned char irq;
unsigned char ver;
unsigned int userdef[3];
unsigned int address[4];
+ unsigned int mask[4];
+ int type[4];
+ int ahb_bus_index;
} ambapp_ahbdev;
-/* AMBA Plug&Play AHB Masters & Slaves information locations
- * Max devices is 64 supported by HW, however often only 8
- * are used.
- */
-typedef struct {
- ahbctrl_pp_dev masters[64];
- ahbctrl_pp_dev slaves[64];
-} ahbctrl_info;
+/* Scan AMBA Bus for AHB Bridges */
+extern void ambapp_bus_init(
+ unsigned int ioarea,
+ unsigned int freq,
+ struct ambapp_bus *abus);
-/* AMBA Plug&Play AHB information layout */
-typedef struct {
- unsigned int conf;
- unsigned int bar;
-} apbctrl_pp_dev;
-
-/* All functions return the number of found devices
- * 0 = no devices found
+/* Find APB Slave device by index using breath first search.
+ *
+ * When vendor and device are both set to zero, any device
+ * with a non-zero device ID will match the search. It may be
+ * useful when processing all devices on a AMBA bus.
*/
+extern int ambapp_apb_find(
+ struct ambapp_bus *abus,
+ int vendor,
+ int device,
+ int index,
+ ambapp_apbdev *dev
+ );
+
+/* Find AHB Master device by index using breath first search.
+ *
+ * When vendor and device are both set to zero, any device
+ * with a non-zero device ID will match the search. It may be
+ * useful when processing all devices on a AMBA bus.
+ */
+extern int ambapp_ahbmst_find(
+ struct ambapp_bus *abus,
+ int vendor,
+ int device,
+ int index,
+ ambapp_ahbdev *dev
+ );
+
+/* Find AHB Slave device by index using breath first search.
+ *
+ * When vendor and device are both set to zero, any device
+ * with a non-zero device ID will match the search. It may be
+ * useful when processing all devices on a AMBA bus.
+ */
+extern int ambapp_ahbslv_find(
+ struct ambapp_bus *abus,
+ int vendor,
+ int device,
+ int index,
+ ambapp_ahbdev *dev
+ );
+
+/* Return number of APB Slave devices of a certain ID (VENDOR:DEVICE)
+ * zero is returned if no devices was found.
+ */
+extern int ambapp_apb_count(struct ambapp_bus *abus, int vendor, int device);
-/****************************** APB SLAVES ******************************/
-int ambapp_apb_count(unsigned int vendor, unsigned int driver);
-
-int ambapp_apb_first(unsigned int vendor,
- unsigned int driver, ambapp_apbdev * dev);
-
-int ambapp_apb_next(unsigned int vendor,
- unsigned int driver, ambapp_apbdev * dev, int index);
-
-int ambapp_apbs_first(unsigned int vendor,
- unsigned int driver, ambapp_apbdev * dev, int max_cnt);
-
-/****************************** AHB MASTERS ******************************/
-int ambapp_ahbmst_count(unsigned int vendor, unsigned int driver);
-
-int ambapp_ahbmst_first(unsigned int vendor,
- unsigned int driver, ambapp_ahbdev * dev);
-
-int ambapp_ahbmst_next(unsigned int vendor,
- unsigned int driver, ambapp_ahbdev * dev, int index);
+/* Return number of AHB Master devices of a certain ID (VENDOR:DEVICE)
+ * zero is returned if no devices was found.
+ */
+extern int ambapp_ahbmst_count(struct ambapp_bus *abus, int vendor, int device);
-int ambapp_ahbmsts_first(unsigned int vendor,
- unsigned int driver, ambapp_ahbdev * dev, int max_cnt);
+/* Return number of AHB Slave devices of a certain ID (VENDOR:DEVICE)
+ * zero is returned if no devices was found.
+ */
+extern int ambapp_ahbslv_count(struct ambapp_bus *abus, int vendor, int device);
-/****************************** AHB SLAVES ******************************/
-int ambapp_ahbslv_count(unsigned int vendor, unsigned int driver);
+#ifdef CONFIG_CMD_AMBAPP
-int ambapp_ahbslv_first(unsigned int vendor,
- unsigned int driver, ambapp_ahbdev * dev);
+/* AMBA Plug&Play relocation & initialization */
+int ambapp_init_reloc(void);
-int ambapp_ahbslv_next(unsigned int vendor,
- unsigned int driver, ambapp_ahbdev * dev, int index);
+/* AMBA Plug&Play Name of Vendors and devices */
-int ambapp_ahbslvs_first(unsigned int vendor,
- unsigned int driver, ambapp_ahbdev * dev, int max_cnt);
+/* Return name of device */
+char *ambapp_device_id2str(int vendor, int id);
-/*************************** AHB/APB only regs functions *************************
- * During start up, no memory is available we can use the simplified functions
- * to get to the memory controller.
- *
- * Functions uses no stack/memory, only registers.
- */
-unsigned int ambapp_apb_next_nomem(register unsigned int vendor, /* Plug&Play Vendor ID */
- register unsigned int driver, /* Plug&Play Device ID */
- register int index);
+/* Return name of vendor */
+char *ambapp_vendor_id2str(int vendor);
-ahbctrl_pp_dev *ambapp_ahb_next_nomem(register unsigned int vendor, /* Plug&Play Vendor ID */
- register unsigned int driver, /* Plug&Play Device ID */
- register unsigned int opts, /* scan for AHB 1=slave, 0=masters */
- register int index);
+/* Return description of a device */
+char *ambapp_device_id2desc(int vendor, int id);
-unsigned int ambapp_ahb_get_info(ahbctrl_pp_dev * ahb, int info);
+#endif
-/*************************** AMBA Plug&Play device register MAPS *****************/
+#endif /* defined(__ASSEMBLER__) */
-/*
- * The following defines the bits in the LEON UART Status Registers.
- */
+#define AMBA_DEFAULT_IOAREA 0xfff00000
+#define AMBA_CONF_AREA 0xff000
+#define AMBA_AHB_SLAVE_CONF_AREA 0x800
-#define LEON_REG_UART_STATUS_DR 0x00000001 /* Data Ready */
-#define LEON_REG_UART_STATUS_TSE 0x00000002 /* TX Send Register Empty */
-#define LEON_REG_UART_STATUS_THE 0x00000004 /* TX Hold Register Empty */
-#define LEON_REG_UART_STATUS_BR 0x00000008 /* Break Error */
-#define LEON_REG_UART_STATUS_OE 0x00000010 /* RX Overrun Error */
-#define LEON_REG_UART_STATUS_PE 0x00000020 /* RX Parity Error */
-#define LEON_REG_UART_STATUS_FE 0x00000040 /* RX Framing Error */
-#define LEON_REG_UART_STATUS_ERR 0x00000078 /* Error Mask */
-
-/*
- * The following defines the bits in the LEON UART Ctrl Registers.
- */
+#define DEV_NONE 0
+#define DEV_AHB_MST 1
+#define DEV_AHB_SLV 2
+#define DEV_APB_SLV 3
-#define LEON_REG_UART_CTRL_RE 0x00000001 /* Receiver enable */
-#define LEON_REG_UART_CTRL_TE 0x00000002 /* Transmitter enable */
-#define LEON_REG_UART_CTRL_RI 0x00000004 /* Receiver interrupt enable */
-#define LEON_REG_UART_CTRL_TI 0x00000008 /* Transmitter interrupt enable */
-#define LEON_REG_UART_CTRL_PS 0x00000010 /* Parity select */
-#define LEON_REG_UART_CTRL_PE 0x00000020 /* Parity enable */
-#define LEON_REG_UART_CTRL_FL 0x00000040 /* Flow control enable */
-#define LEON_REG_UART_CTRL_LB 0x00000080 /* Loop Back enable */
-#define LEON_REG_UART_CTRL_DBG (1<<11) /* Debug Bit used by GRMON */
-
-#define LEON3_GPTIMER_EN 1
-#define LEON3_GPTIMER_RL 2
-#define LEON3_GPTIMER_LD 4
-#define LEON3_GPTIMER_IRQEN 8
-
-/*
- * The following defines the bits in the LEON PS/2 Status Registers.
- */
-
-#define LEON_REG_PS2_STATUS_DR 0x00000001 /* Data Ready */
-#define LEON_REG_PS2_STATUS_PE 0x00000002 /* Parity error */
-#define LEON_REG_PS2_STATUS_FE 0x00000004 /* Framing error */
-#define LEON_REG_PS2_STATUS_KI 0x00000008 /* Keyboard inhibit */
+#define AMBA_TYPE_APBIO 0x1
+#define AMBA_TYPE_MEM 0x2
+#define AMBA_TYPE_AHBIO 0x3
-/*
- * The following defines the bits in the LEON PS/2 Ctrl Registers.
+/* ID layout for APB and AHB devices */
+#define AMBA_PNP_ID(vendor, device) (((vendor)<<24) | ((device)<<12))
+
+/* APB Slave PnP layout definitions */
+#define AMBA_APB_ID_OFS (0*4)
+#define AMBA_APB_IOBAR_OFS (1*4)
+#define AMBA_APB_CONF_LENGH (2*4)
+
+/* AHB Master/Slave layout PnP definitions */
+#define AMBA_AHB_ID_OFS (0*4)
+#define AMBA_AHB_CUSTOM0_OFS (1*4)
+#define AMBA_AHB_CUSTOM1_OFS (2*4)
+#define AMBA_AHB_CUSTOM2_OFS (3*4)
+#define AMBA_AHB_MBAR0_OFS (4*4)
+#define AMBA_AHB_MBAR1_OFS (5*4)
+#define AMBA_AHB_MBAR2_OFS (6*4)
+#define AMBA_AHB_MBAR3_OFS (7*4)
+#define AMBA_AHB_CONF_LENGH (8*4)
+
+/* Macros for extracting information from AMBA PnP information
+ * registers.
*/
-#define LEON_REG_PS2_CTRL_RE 0x00000001 /* Receiver enable */
-#define LEON_REG_PS2_CTRL_TE 0x00000002 /* Transmitter enable */
-#define LEON_REG_PS2_CTRL_RI 0x00000004 /* Keyboard receive interrupt */
-#define LEON_REG_PS2_CTRL_TI 0x00000008 /* Keyboard transmit interrupt */
-
-typedef struct {
- volatile unsigned int ilevel;
- volatile unsigned int ipend;
- volatile unsigned int iforce;
- volatile unsigned int iclear;
- volatile unsigned int mstatus;
- volatile unsigned int notused[11];
- volatile unsigned int cpu_mask[16];
- volatile unsigned int cpu_force[16];
-} ambapp_dev_irqmp;
-
-typedef struct {
- volatile unsigned int data;
- volatile unsigned int status;
- volatile unsigned int ctrl;
- volatile unsigned int scaler;
-} ambapp_dev_apbuart;
+#define amba_vendor(x) (((x) >> 24) & 0xff)
-typedef struct {
- volatile unsigned int val;
- volatile unsigned int rld;
- volatile unsigned int ctrl;
- volatile unsigned int unused;
-} ambapp_dev_gptimer_element;
-
-#define LEON3_GPTIMER_CTRL_EN 0x1 /* Timer enable */
-#define LEON3_GPTIMER_CTRL_RS 0x2 /* Timer reStart */
-#define LEON3_GPTIMER_CTRL_LD 0x4 /* Timer reLoad */
-#define LEON3_GPTIMER_CTRL_IE 0x8 /* interrupt enable */
-#define LEON3_GPTIMER_CTRL_IP 0x10 /* interrupt flag/pending */
-#define LEON3_GPTIMER_CTRL_CH 0x20 /* Chain with previous timer */
+#define amba_device(x) (((x) >> 12) & 0xfff)
-typedef struct {
- volatile unsigned int scalar;
- volatile unsigned int scalar_reload;
- volatile unsigned int config;
- volatile unsigned int unused;
- volatile ambapp_dev_gptimer_element e[8];
-} ambapp_dev_gptimer;
+#define amba_irq(conf) ((conf) & 0x1f)
-typedef struct {
- volatile unsigned int iodata;
- volatile unsigned int ioout;
- volatile unsigned int iodir;
- volatile unsigned int irqmask;
- volatile unsigned int irqpol;
- volatile unsigned int irqedge;
-} ambapp_dev_ioport;
-
-typedef struct {
- volatile unsigned int write;
- volatile unsigned int dummy;
- volatile unsigned int txcolor;
- volatile unsigned int bgcolor;
-} ambapp_dev_textvga;
+#define amba_ver(conf) (((conf)>>5) & 0x1f)
-typedef struct {
- volatile unsigned int data;
- volatile unsigned int status;
- volatile unsigned int ctrl;
-} ambapp_dev_apbps2;
+#define amba_iobar_start(base, iobar) \
+ ((base) | ((((iobar) & 0xfff00000)>>12) & (((iobar) & 0xfff0)<<4)))
-typedef struct {
- unsigned int mcfg1, mcfg2, mcfg3;
-} ambapp_dev_mctrl;
+#define amba_membar_start(mbar) \
+ (((mbar) & 0xfff00000) & (((mbar) & 0xfff0) << 16))
-typedef struct {
- unsigned int sdcfg;
-} ambapp_dev_sdctrl;
+#define amba_membar_type(mbar) ((mbar) & 0xf)
-typedef struct {
- unsigned int cfg1;
- unsigned int cfg2;
- unsigned int cfg3;
-} ambapp_dev_ddr2spa;
+#define amba_membar_mask(mbar) (((mbar) >> 4) & 0xfff)
-typedef struct {
- unsigned int ctrl;
- unsigned int cfg;
-} ambapp_dev_ddrspa;
+#define amba_ahbio_adr(addr, base_ioarea) \
+ ((unsigned int)(base_ioarea) | ((addr) >> 12))
-#endif
+#define amba_apb_mask(iobar) ((~(amba_membar_mask(iobar)<<8) & 0x000fffff) + 1)
#endif
diff --git a/include/ambapp_ids.h b/include/ambapp_ids.h
new file mode 100644
index 0000000000..1eae34e554
--- /dev/null
+++ b/include/ambapp_ids.h
@@ -0,0 +1,250 @@
+/* AMBA Plug & Play Bus Vendor and Device IDs.
+ *
+ * (C) Copyright 2010, 2015
+ * Daniel Hellstrom, Cobham Gaisler, daniel@gaisler.com.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+
+#ifndef __AMBAPP_IDS_H__
+#define __AMBAPP_IDS_H__
+
+/* Vendor ID defines */
+#define VENDOR_GAISLER 0x01
+#define VENDOR_PENDER 0x02
+#define VENDOR_ESA 0x04
+#define VENDOR_ASTRIUM 0x06
+#define VENDOR_OPENCHIP 0x07
+#define VENDOR_OPENCORES 0x08
+#define VENDOR_CONTRIB 0x09
+#define VENDOR_EONIC 0x0b
+#define VENDOR_RADIONOR 0x0f
+#define VENDOR_GLEICHMANN 0x10
+#define VENDOR_MENTA 0x11
+#define VENDOR_SUN 0x13
+#define VENDOR_MOVIDIA 0x14
+#define VENDOR_ORBITA 0x17
+#define VENDOR_SYNOPSYS 0x21
+#define VENDOR_NASA 0x22
+#define VENDOR_S3 0x31
+#define VENDOR_CAL 0xca
+#define VENDOR_EMBEDDIT 0xea
+#define VENDOR_CETON 0xcb
+#define VENDOR_ACTEL 0xac
+#define VENDOR_APPLECORE 0xae
+
+/* Aeroflex Gaisler device ID defines */
+#define GAISLER_LEON2DSU 0x002
+#define GAISLER_LEON3 0x003
+#define GAISLER_LEON3DSU 0x004
+#define GAISLER_ETHAHB 0x005
+#define GAISLER_APBMST 0x006
+#define GAISLER_AHBUART 0x007
+#define GAISLER_SRCTRL 0x008
+#define GAISLER_SDCTRL 0x009
+#define GAISLER_SSRCTRL 0x00a
+#define GAISLER_APBUART 0x00c
+#define GAISLER_IRQMP 0x00d
+#define GAISLER_AHBRAM 0x00e
+#define GAISLER_AHBDPRAM 0x00f
+#define GAISLER_GPTIMER 0x011
+#define GAISLER_PCITRG 0x012
+#define GAISLER_PCISBRG 0x013
+#define GAISLER_PCIFBRG 0x014
+#define GAISLER_PCITRACE 0x015
+#define GAISLER_DMACTRL 0x016
+#define GAISLER_AHBTRACE 0x017
+#define GAISLER_DSUCTRL 0x018
+#define GAISLER_CANAHB 0x019
+#define GAISLER_GPIO 0x01a
+#define GAISLER_AHBROM 0x01b
+#define GAISLER_AHBJTAG 0x01c
+#define GAISLER_ETHMAC 0x01d
+#define GAISLER_SWNODE 0x01e
+#define GAISLER_SPW 0x01f
+#define GAISLER_AHB2AHB 0x020
+#define GAISLER_USBDC 0x021
+#define GAISLER_USB_DCL 0x022
+#define GAISLER_DDRMP 0x023
+#define GAISLER_ATACTRL 0x024
+#define GAISLER_DDRSP 0x025
+#define GAISLER_EHCI 0x026
+#define GAISLER_UHCI 0x027
+#define GAISLER_I2CMST 0x028
+#define GAISLER_SPW2 0x029
+#define GAISLER_AHBDMA 0x02a
+#define GAISLER_NUHOSP3 0x02b
+#define GAISLER_CLKGATE 0x02c
+#define GAISLER_SPICTRL 0x02d
+#define GAISLER_DDR2SP 0x02e
+#define GAISLER_SLINK 0x02f
+#define GAISLER_GRTM 0x030
+#define GAISLER_GRTC 0x031
+#define GAISLER_GRPW 0x032
+#define GAISLER_GRCTM 0x033
+#define GAISLER_GRHCAN 0x034
+#define GAISLER_GRFIFO 0x035
+#define GAISLER_GRADCDAC 0x036
+#define GAISLER_GRPULSE 0x037
+#define GAISLER_GRTIMER 0x038
+#define GAISLER_AHB2PP 0x039
+#define GAISLER_GRVERSION 0x03a
+#define GAISLER_APB2PW 0x03b
+#define GAISLER_PW2APB 0x03c
+#define GAISLER_GRCAN 0x03d
+#define GAISLER_I2CSLV 0x03e
+#define GAISLER_U16550 0x03f
+#define GAISLER_AHBMST_EM 0x040
+#define GAISLER_AHBSLV_EM 0x041
+#define GAISLER_GRTESTMOD 0x042
+#define GAISLER_ASCS 0x043
+#define GAISLER_IPMVBCTRL 0x044
+#define GAISLER_SPIMCTRL 0x045
+#define GAISLER_L4STAT 0x047
+#define GAISLER_LEON4 0x048
+#define GAISLER_LEON4DSU 0x049
+#define GAISLER_PWM 0x04a
+#define GAISLER_L2CACHE 0x04b
+#define GAISLER_SDCTRL64 0x04c
+#define GAISLER_GR1553B 0x04d
+#define GAISLER_1553TST 0x04e
+#define GAISLER_GRIOMMU 0x04f
+#define GAISLER_FTAHBRAM 0x050
+#define GAISLER_FTSRCTRL 0x051
+#define GAISLER_AHBSTAT 0x052
+#define GAISLER_LEON3FT 0x053
+#define GAISLER_FTMCTRL 0x054
+#define GAISLER_FTSDCTRL 0x055
+#define GAISLER_FTSRCTRL8 0x056
+#define GAISLER_MEMSCRUB 0x057
+#define GAISLER_FTSDCTRL64 0x058
+#define GAISLER_APBPS2 0x060
+#define GAISLER_VGACTRL 0x061
+#define GAISLER_LOGAN 0x062
+#define GAISLER_SVGACTRL 0x063
+#define GAISLER_T1AHB 0x064
+#define GAISLER_MP7WRAP 0x065
+#define GAISLER_GRSYSMON 0x066
+#define GAISLER_GRACECTRL 0x067
+#define GAISLER_ATAHBSLV 0x068
+#define GAISLER_ATAHBMST 0x069
+#define GAISLER_ATAPBSLV 0x06a
+#define GAISLER_B1553BC 0x070
+#define GAISLER_B1553RT 0x071
+#define GAISLER_B1553BRM 0x072
+#define GAISLER_AES 0x073
+#define GAISLER_ECC 0x074
+#define GAISLER_PCIF 0x075
+#define GAISLER_CLKMOD 0x076
+#define GAISLER_HAPSTRAK 0x077
+#define GAISLER_TEST_1X2 0x078
+#define GAISLER_WILD2AHB 0x079
+#define GAISLER_BIO1 0x07a
+#define GAISLER_AESDMA 0x07b
+#define GAISLER_SATCAN 0x080
+#define GAISLER_CANMUX 0x081
+#define GAISLER_GRTMRX 0x082
+#define GAISLER_GRTCTX 0x083
+#define GAISLER_GRTMDESC 0x084
+#define GAISLER_GRTMVC 0x085
+#define GAISLER_GEFFE 0x086
+#define GAISLER_GPREG 0x087
+#define GAISLER_GRTMPAHB 0x088
+#define GAISLER_SPWCUC 0x089
+#define GAISLER_SPW2_DMA 0x08a
+#define GAISLER_SPWROUTER 0x08b
+
+/* European Space Agency device ID defines */
+#define ESA_LEON2 0x002
+#define ESA_LEON2APB 0x003
+#define ESA_IRQ 0x005
+#define ESA_TIMER 0x006
+#define ESA_UART 0x007
+#define ESA_CFG 0x008
+#define ESA_IO 0x009
+#define ESA_MCTRL 0x00f
+#define ESA_PCIARB 0x010
+#define ESA_HURRICANE 0x011
+#define ESA_SPW_RMAP 0x012
+#define ESA_AHBUART 0x013
+#define ESA_SPWA 0x014
+#define ESA_BOSCHCAN 0x015
+#define ESA_IRQ2 0x016
+#define ESA_AHBSTAT 0x017
+#define ESA_WPROT 0x018
+#define ESA_WPROT2 0x019
+#define ESA_PDEC3AMBA 0x020
+#define ESA_PTME3AMBA 0x021
+
+/* OpenChip device ID defines */
+#define OPENCHIP_APBGPIO 0x001
+#define OPENCHIP_APBI2C 0x002
+#define OPENCHIP_APBSPI 0x003
+#define OPENCHIP_APBCHARLCD 0x004
+#define OPENCHIP_APBPWM 0x005
+#define OPENCHIP_APBPS2 0x006
+#define OPENCHIP_APBMMCSD 0x007
+#define OPENCHIP_APBNAND 0x008
+#define OPENCHIP_APBLPC 0x009
+#define OPENCHIP_APBCF 0x00a
+#define OPENCHIP_APBSYSACE 0x00b
+#define OPENCHIP_APB1WIRE 0x00c
+#define OPENCHIP_APBJTAG 0x00d
+#define OPENCHIP_APBSUI 0x00e
+
+/* Various contributions device ID defines */
+#define CONTRIB_CORE1 0x001
+#define CONTRIB_CORE2 0x002
+
+/* Gleichmann Electronics device ID defines */
+#define GLEICHMANN_CUSTOM 0x001
+#define GLEICHMANN_GEOLCD01 0x002
+#define GLEICHMANN_DAC 0x003
+#define GLEICHMANN_HPI 0x004
+#define GLEICHMANN_SPI 0x005
+#define GLEICHMANN_HIFC 0x006
+#define GLEICHMANN_ADCDAC 0x007
+#define GLEICHMANN_SPIOC 0x008
+#define GLEICHMANN_AC97 0x009
+
+/* Sun Microsystems device ID defines */
+#define SUN_T1 0x001
+#define SUN_S1 0x011
+
+/* Orbita device ID defines */
+#define ORBITA_1553B 0x001
+#define ORBITA_429 0x002
+#define ORBITA_SPI 0x003
+#define ORBITA_I2C 0x004
+#define ORBITA_SMARTCARD 0x064
+#define ORBITA_SDCARD 0x065
+#define ORBITA_UART16550 0x066
+#define ORBITA_CRYPTO 0x067
+#define ORBITA_SYSIF 0x068
+#define ORBITA_PIO 0x069
+#define ORBITA_RTC 0x0c8
+#define ORBITA_COLORLCD 0x12c
+#define ORBITA_PCI 0x190
+#define ORBITA_DSP 0x1f4
+#define ORBITA_USBHOST 0x258
+#define ORBITA_USBDEV 0x2bc
+
+/* NASA device ID defines */
+#define NASA_EP32 0x001
+
+/* CAL device ID defines */
+#define CAL_DDRCTRL 0x188
+
+/* Actel Corporation device ID defines */
+#define ACTEL_COREMP7 0x001
+
+/* AppleCore device ID defines */
+#define APPLECORE_UTLEON3 0x001
+#define APPLECORE_UTLEON3DSU 0x002
+
+/* Opencores device id's */
+#define OPENCORES_PCIBR 0x4
+#define OPENCORES_ETHMAC 0x5
+
+#endif
diff --git a/include/config_cmd_all.h b/include/config_cmd_all.h
index 8832552f31..424721b7e7 100644
--- a/include/config_cmd_all.h
+++ b/include/config_cmd_all.h
@@ -13,7 +13,6 @@
* Alphabetical list of all possible commands.
*/
-#define CONFIG_CMD_AMBAPP /* AMBA Plug & Play Bus print utility */
#define CONFIG_CMD_ASKENV /* ask for env variable */
#define CONFIG_CMD_BEDBUG /* Include BedBug Debugger */
#define CONFIG_CMD_BMP /* BMP support */
diff --git a/include/configs/gr_cpci_ax2000.h b/include/configs/gr_cpci_ax2000.h
index 782746e4e0..5bbf1aaae8 100644
--- a/include/configs/gr_cpci_ax2000.h
+++ b/include/configs/gr_cpci_ax2000.h
@@ -60,7 +60,6 @@
* Supported commands
*/
#define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_AMBAPP
#define CONFIG_CMD_PING
#define CONFIG_CMD_DIAG
#define CONFIG_CMD_IRQ
@@ -311,40 +310,38 @@
/***** Gaisler GRLIB IP-Cores Config ********/
-/* AMBA Plug & Play info display on startup */
-/*#define CONFIG_SYS_AMBAPP_PRINT_ON_STARTUP*/
-
#define CONFIG_SYS_GRLIB_SDRAM 0
+/* No SDRAM Configuration */
+#undef CONFIG_SYS_GRLIB_GAISLER_SDCTRL1
+
/* See, GRLIB Docs (grip.pdf) on how to set up
* These the memory controller registers.
*/
-#define CONFIG_SYS_GRLIB_MEMCFG1 (0x10f800ff | (1<<11))
+#define CONFIG_SYS_GRLIB_ESA_MCTRL1
+#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG1 (0x10f800ff | (1<<11))
#if CONFIG_LEON_RAM_SELECT == CONFIG_LEON_RAM_SDRAM_NOSRAM
-#define CONFIG_SYS_GRLIB_MEMCFG2 0x82206000
+#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG2 0x82206000
#else
-#define CONFIG_SYS_GRLIB_MEMCFG2 0x82205260
+#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG2 0x82205260
#endif
-#define CONFIG_SYS_GRLIB_MEMCFG3 0x0809a000
+#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG3 0x0809a000
-#define CONFIG_SYS_GRLIB_FT_MEMCFG1 (0x10f800ff | (1<<11))
+/* GRLIB FT-MCTRL configuration */
+#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1
+#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG1 (0x10f800ff | (1<<11))
#if CONFIG_LEON_RAM_SELECT == CONFIG_LEON_RAM_SDRAM_NOSRAM
-#define CONFIG_SYS_GRLIB_FT_MEMCFG2 0x82206000
+#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG2 0x82206000
#else
-#define CONFIG_SYS_GRLIB_FT_MEMCFG2 0x82205260
+#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG2 0x82205260
#endif
-#define CONFIG_SYS_GRLIB_FT_MEMCFG3 0x0809a000
+#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG3 0x0809a000
/* no DDR controller */
-#define CONFIG_SYS_GRLIB_DDR_CFG 0x00000000
+#undef CONFIG_SYS_GRLIB_GAISLER_DDRSPA1
/* no DDR2 Controller */
-#define CONFIG_SYS_GRLIB_DDR2_CFG1 0x00000000
-#define CONFIG_SYS_GRLIB_DDR2_CFG3 0x00000000
-
-/* Calculate scaler register value from default baudrate */
-#define CONFIG_SYS_GRLIB_APBUART_SCALER \
- ((((CONFIG_SYS_CLK_FREQ*10)/(CONFIG_BAUDRATE*8))-5)/10)
+#undef CONFIG_SYS_GRLIB_GAISLER_DDR2SPA1
/* Identification string */
#define CONFIG_IDENT_STRING "GAISLER LEON3 GR-CPCI-AX2000"
diff --git a/include/configs/gr_ep2s60.h b/include/configs/gr_ep2s60.h
index 5c466f2929..b55ca77a87 100644
--- a/include/configs/gr_ep2s60.h
+++ b/include/configs/gr_ep2s60.h
@@ -54,7 +54,6 @@
* Supported commands
*/
#define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_AMBAPP
#define CONFIG_CMD_PING
#define CONFIG_CMD_DIAG
#define CONFIG_CMD_IRQ
@@ -288,30 +287,31 @@
/***** Gaisler GRLIB IP-Cores Config ********/
-/* AMBA Plug & Play info display on startup */
-/*#define CONFIG_SYS_AMBAPP_PRINT_ON_STARTUP*/
-
#define CONFIG_SYS_GRLIB_SDRAM 0
+/* No SDRAM Configuration */
+#undef CONFIG_SYS_GRLIB_GAISLER_SDCTRL1
+
/* See, GRLIB Docs (grip.pdf) on how to set up
* These the memory controller registers.
*/
-#define CONFIG_SYS_GRLIB_MEMCFG1 (0x10f800ff | (1<<11))
-#define CONFIG_SYS_GRLIB_MEMCFG2 0x00000000
-#define CONFIG_SYS_GRLIB_MEMCFG3 0x00000000
-
-#define CONFIG_SYS_GRLIB_FT_MEMCFG1 (0x10f800ff | (1<<11))
-#define CONFIG_SYS_GRLIB_FT_MEMCFG2 0x00000000
-#define CONFIG_SYS_GRLIB_FT_MEMCFG3 0x00000000
-
-#define CONFIG_SYS_GRLIB_DDR_CFG 0xa900830a
-
-#define CONFIG_SYS_GRLIB_DDR2_CFG1 0x00000000
-#define CONFIG_SYS_GRLIB_DDR2_CFG3 0x00000000
-
-/* Calculate scaler register value from default baudrate */
-#define CONFIG_SYS_GRLIB_APBUART_SCALER \
- ((((CONFIG_SYS_CLK_FREQ*10)/(CONFIG_BAUDRATE*8))-5)/10)
+#define CONFIG_SYS_GRLIB_ESA_MCTRL1
+#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG1 (0x10f800ff | (1<<11))
+#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG2 0x00000000
+#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG3 0x00000000
+
+/* GRLIB FT-MCTRL configuration */
+#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1
+#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG1 (0x10f800ff | (1<<11))
+#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG2 0x00000000
+#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG3 0x00000000
+
+/* DDR controller */
+#define CONFIG_SYS_GRLIB_GAISLER_DDRSPA1
+#define CONFIG_SYS_GRLIB_GAISLER_DDRSPA1_CTRL 0xa900830a
+
+/* no DDR2 Controller */
+#undef CONFIG_SYS_GRLIB_GAISLER_DDR2SPA1
/* Identification string */
#define CONFIG_IDENT_STRING "GAISLER LEON3 EP2S60"
diff --git a/include/configs/gr_xc3s_1500.h b/include/configs/gr_xc3s_1500.h
index e01578cbb2..d086b694c2 100644
--- a/include/configs/gr_xc3s_1500.h
+++ b/include/configs/gr_xc3s_1500.h
@@ -41,7 +41,6 @@
* Supported commands
*/
#define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_AMBAPP
#define CONFIG_CMD_PING
#define CONFIG_CMD_DIAG
#define CONFIG_CMD_IRQ
@@ -251,32 +250,30 @@
/***** Gaisler GRLIB IP-Cores Config ********/
-/* AMBA Plug & Play info display on startup */
-/*#define CONFIG_SYS_AMBAPP_PRINT_ON_STARTUP*/
-
#define CONFIG_SYS_GRLIB_SDRAM 0
+/* No SDRAM Configuration */
+#undef CONFIG_SYS_GRLIB_GAISLER_SDCTRL1
+
/* See, GRLIB Docs (grip.pdf) on how to set up
* These the memory controller registers.
*/
-#define CONFIG_SYS_GRLIB_MEMCFG1 (0x000000ff | (1<<11))
-#define CONFIG_SYS_GRLIB_MEMCFG2 0x82206000
-#define CONFIG_SYS_GRLIB_MEMCFG3 0x00136000
+#define CONFIG_SYS_GRLIB_ESA_MCTRL1
+#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG1 (0x000000ff | (1<<11))
+#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG2 0x82206000
+#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG3 0x00136000
-#define CONFIG_SYS_GRLIB_FT_MEMCFG1 (0x000000ff | (1<<11))
-#define CONFIG_SYS_GRLIB_FT_MEMCFG2 0x82206000
-#define CONFIG_SYS_GRLIB_FT_MEMCFG3 0x00136000
+/* GRLIB FT-MCTRL configuration */
+#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1
+#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG1 (0x000000ff | (1<<11))
+#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG2 0x82206000
+#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG3 0x00136000
/* no DDR controller */
-#define CONFIG_SYS_GRLIB_DDR_CFG 0x00000000
+#undef CONFIG_SYS_GRLIB_GAISLER_DDRSPA1
/* no DDR2 Controller */
-#define CONFIG_SYS_GRLIB_DDR2_CFG1 0x00000000
-#define CONFIG_SYS_GRLIB_DDR2_CFG3 0x00000000
-
-/* Calculate scaler register value from default baudrate */
-#define CONFIG_SYS_GRLIB_APBUART_SCALER \
- ((((CONFIG_SYS_CLK_FREQ*10)/(CONFIG_BAUDRATE*8))-5)/10)
+#undef CONFIG_SYS_GRLIB_GAISLER_DDR2SPA1
/* Identification string */
#define CONFIG_IDENT_STRING "GAISLER LEON3 GR-XC3S-1500"
diff --git a/include/configs/grsim.h b/include/configs/grsim.h
index f54919eaae..e1f7dc3bf6 100644
--- a/include/configs/grsim.h
+++ b/include/configs/grsim.h
@@ -19,9 +19,13 @@
*
* Select between TSIM or GRSIM by setting CONFIG_GRSIM or CONFIG_TSIM to 1.
*
- * TSIM command
- * tsim-leon3 -sdram 0 -ram 32000 -rom 8192 -mmu
+ * TSIM command:
+ * $ tsim-leon3 -sdram 32768 -ram 4096 -rom 2048 -mmu -cas
*
+ * In the evaluation version of TSIM, the -sdram/-ram/-rom arguments are
+ * hard-coded to these values and need not be specified. (see below)
+ *
+ * Get TSIM from http://www.gaisler.com/index.php/downloads/simulators
*/
#define CONFIG_GRSIM 0 /* ... not running on GRSIM */
@@ -47,7 +51,6 @@
/*
* Supported commands
*/
-#define CONFIG_CMD_AMBAPP /* AMBA Plyg&Play information */
#define CONFIG_CMD_DIAG
#define CONFIG_CMD_FPGA_LOADMK
#define CONFIG_CMD_IRQ
@@ -184,18 +187,18 @@
/*
* Memory map
*/
-#define CONFIG_SYS_SDRAM_BASE 0x40000000
-#define CONFIG_SYS_SDRAM_SIZE 0x02000000
-#define CONFIG_SYS_SDRAM_END (CONFIG_SYS_SDRAM_BASE+CONFIG_SYS_SDRAM_SIZE)
+#define CONFIG_SYS_SDRAM_BASE 0x60000000
+#define CONFIG_SYS_SDRAM_SIZE 0x02000000 /* 32MiB SDRAM */
+#define CONFIG_SYS_SDRAM_END (CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_SDRAM_SIZE)
-/* no SRAM available */
-#undef CONFIG_SYS_SRAM_BASE
-#undef CONFIG_SYS_SRAM_SIZE
+#define CONFIG_SYS_SRAM_BASE 0x40000000
+#define CONFIG_SYS_SRAM_SIZE 0x00400000 /* 4MiB SRAM */
+#define CONFIG_SYS_SRAM_END (CONFIG_SYS_SRAM_BASE + CONFIG_SYS_SRAM_SIZE)
/* Always Run U-Boot from SDRAM */
-#define CONFIG_SYS_RAM_BASE CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_RAM_SIZE CONFIG_SYS_SDRAM_SIZE
-#define CONFIG_SYS_RAM_END CONFIG_SYS_SDRAM_END
+#define CONFIG_SYS_RAM_BASE CONFIG_SYS_SDRAM_BASE
+#define CONFIG_SYS_RAM_SIZE CONFIG_SYS_SDRAM_SIZE
+#define CONFIG_SYS_RAM_END CONFIG_SYS_SDRAM_END
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_RAM_END - GENERATED_GBL_DATA_SIZE)
@@ -224,6 +227,7 @@
/* make un relocated address from relocated address */
#define UN_RELOC(address) (address-(CONFIG_SYS_RELOC_MONITOR_BASE-CONFIG_SYS_TEXT_BASE))
+#ifdef CONFIG_CMD_NET
/*
* Ethernet configuration
*/
@@ -235,6 +239,8 @@
/* #define CONFIG_GRETH_10MBIT 1 */
#define CONFIG_PHY_ADDR 0x00
+#endif /* CONFIG_CMD_NET */
+
/*
* Miscellaneous configurable options
*/
@@ -255,37 +261,65 @@
/***** Gaisler GRLIB IP-Cores Config ********/
-/* AMBA Plug & Play info display on startup */
-/*#define CONFIG_SYS_AMBAPP_PRINT_ON_STARTUP*/
-
#define CONFIG_SYS_GRLIB_SDRAM 0
+
#define CONFIG_SYS_GRLIB_MEMCFG1 (0x000000ff | (1<<11))
+
+/* No SDRAM Configuration */
+#undef CONFIG_SYS_GRLIB_GAISLER_SDCTRL1
+
+/* LEON2 MCTRL configuration */
+#define CONFIG_SYS_GRLIB_ESA_MCTRL1
+#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG1 (0x000000ff | (1<<11))
#if CONFIG_GRSIM
/* GRSIM configuration */
-#define CONFIG_SYS_GRLIB_MEMCFG2 0x82206000
+#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG2 0x82206000
#else
/* TSIM configuration */
-#define CONFIG_SYS_GRLIB_MEMCFG2 0x00001820
+#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG2 0x81805220
#endif
-#define CONFIG_SYS_GRLIB_MEMCFG3 0x00136000
+#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG3 0x00136000
-#define CONFIG_SYS_GRLIB_FT_MEMCFG1 (0x000000ff | (1<<11))
-#define CONFIG_SYS_GRLIB_FT_MEMCFG2 0x82206000
-#define CONFIG_SYS_GRLIB_FT_MEMCFG3 0x00136000
+/* GRLIB FT-MCTRL configuration */
+#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1
+#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG1 (0x000000ff | (1<<11))
+#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG2 0x82206000
+#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG3 0x00136000
/* no DDR controller */
-#define CONFIG_SYS_GRLIB_DDR_CFG 0x00000000
+#undef CONFIG_SYS_GRLIB_GAISLER_DDRSPA1
/* no DDR2 Controller */
-#define CONFIG_SYS_GRLIB_DDR2_CFG1 0x00000000
-#define CONFIG_SYS_GRLIB_DDR2_CFG3 0x00000000
-
-#define CONFIG_SYS_GRLIB_APBUART_SCALER \
- ((((CONFIG_SYS_CLK_FREQ*10)/(CONFIG_BAUDRATE*8))-5)/10)
+#undef CONFIG_SYS_GRLIB_GAISLER_DDR2SPA1
/* default kernel command line */
#define CONFIG_DEFAULT_KERNEL_COMMAND_LINE "console=ttyS0,38400\0\0"
#define CONFIG_IDENT_STRING "Gaisler GRSIM"
+/* TSIM command:
+ * $ ./tsim-leon3 -mmu -cas
+ *
+ * This TSIM evaluation version will expire 2015-04-02
+ *
+ *
+ * TSIM/LEON3 SPARC simulator, version 2.0.35 (evaluation version)
+ *
+ * Copyright (C) 2014, Aeroflex Gaisler - all rights reserved.
+ * This software may only be used with a valid license.
+ * For latest updates, go to http://www.gaisler.com/
+ * Comments or bug-reports to support@gaisler.com
+ *
+ * serial port A on stdin/stdout
+ * allocated 4096 K SRAM memory, in 1 bank
+ * allocated 32 M SDRAM memory, in 1 bank
+ * allocated 2048 K ROM memory
+ * icache: 1 * 4 kbytes, 16 bytes/line (4 kbytes total)
+ * dcache: 1 * 4 kbytes, 16 bytes/line (4 kbytes total)
+ * tsim> leon
+ * 0x80000000 Memory configuration register 1 0x000002ff
+ * 0x80000004 Memory configuration register 2 0x81805220
+ * 0x80000008 Memory configuration register 3 0x00000000
+ */
+
#endif /* __CONFIG_H */
diff --git a/include/configs/grsim_leon2.h b/include/configs/grsim_leon2.h
index bd2eaa9fda..83fd7fae50 100644
--- a/include/configs/grsim_leon2.h
+++ b/include/configs/grsim_leon2.h
@@ -264,8 +264,6 @@
#define CONFIG_SYS_GRLIB_MEMCFG3 0x00136000
/*** LEON2 UART 1 ***/
-#define CONFIG_SYS_LEON2_UART1_SCALER \
- ((((CONFIG_SYS_CLK_FREQ*10)/(CONFIG_BAUDRATE*8))-5)/10)
/* UART1 Define to 1 or 0 */
#define LEON2_UART1_LOOPBACK_ENABLE 0
@@ -275,9 +273,6 @@
/*** LEON2 UART 2 ***/
-#define CONFIG_SYS_LEON2_UART2_SCALER \
- ((((CONFIG_SYS_CLK_FREQ*10)/(CONFIG_BAUDRATE*8))-5)/10)
-
/* UART2 Define to 1 or 0 */
#define LEON2_UART2_LOOPBACK_ENABLE 0
#define LEON2_UART2_FLOWCTRL_ENABLE 0
diff --git a/include/grlib/apbuart.h b/include/grlib/apbuart.h
new file mode 100644
index 0000000000..1e1eb9a77c
--- /dev/null
+++ b/include/grlib/apbuart.h
@@ -0,0 +1,47 @@
+/* GRLIB APBUART definitions
+ *
+ * (C) Copyright 2010, 2015
+ * Daniel Hellstrom, Cobham Gaisler, daniel@gaisler.com
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __GRLIB_APBUART_H__
+#define __GRLIB_APBUART_H__
+
+/* APBUART Register map */
+typedef struct {
+ volatile unsigned int data;
+ volatile unsigned int status;
+ volatile unsigned int ctrl;
+ volatile unsigned int scaler;
+} ambapp_dev_apbuart;
+
+/*
+ * The following defines the bits in the LEON UART Status Registers.
+ */
+
+#define APBUART_STATUS_DR 0x00000001 /* Data Ready */
+#define APBUART_STATUS_TSE 0x00000002 /* TX Send Register Empty */
+#define APBUART_STATUS_THE 0x00000004 /* TX Hold Register Empty */
+#define APBUART_STATUS_BR 0x00000008 /* Break Error */
+#define APBUART_STATUS_OE 0x00000010 /* RX Overrun Error */
+#define APBUART_STATUS_PE 0x00000020 /* RX Parity Error */
+#define APBUART_STATUS_FE 0x00000040 /* RX Framing Error */
+#define APBUART_STATUS_ERR 0x00000078 /* Error Mask */
+
+/*
+ * The following defines the bits in the LEON UART Ctrl Registers.
+ */
+
+#define APBUART_CTRL_RE 0x00000001 /* Receiver enable */
+#define APBUART_CTRL_TE 0x00000002 /* Transmitter enable */
+#define APBUART_CTRL_RI 0x00000004 /* Receiver interrupt enable */
+#define APBUART_CTRL_TI 0x00000008 /* Transmitter interrupt enable */
+#define APBUART_CTRL_PS 0x00000010 /* Parity select */
+#define APBUART_CTRL_PE 0x00000020 /* Parity enable */
+#define APBUART_CTRL_FL 0x00000040 /* Flow control enable */
+#define APBUART_CTRL_LB 0x00000080 /* Loop Back enable */
+#define APBUART_CTRL_DBG (1<<11) /* Debug Bit used by GRMON */
+
+#endif
diff --git a/include/grlib/gptimer.h b/include/grlib/gptimer.h
new file mode 100644
index 0000000000..8b2b1651b0
--- /dev/null
+++ b/include/grlib/gptimer.h
@@ -0,0 +1,34 @@
+/* GRLIB GPTIMER (General Purpose Timer) definitions
+ *
+ * (C) Copyright 2010, 2015
+ * Daniel Hellstrom, Cobham Gaisler, daniel@gaisler.com
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __GRLIB_GPTIMER_H__
+#define __GRLIB_GPTIMER_H__
+
+typedef struct {
+ volatile unsigned int val;
+ volatile unsigned int rld;
+ volatile unsigned int ctrl;
+ volatile unsigned int unused;
+} ambapp_dev_gptimer_element;
+
+#define GPTIMER_CTRL_EN 0x1 /* Timer enable */
+#define GPTIMER_CTRL_RS 0x2 /* Timer reStart */
+#define GPTIMER_CTRL_LD 0x4 /* Timer reLoad */
+#define GPTIMER_CTRL_IE 0x8 /* interrupt enable */
+#define GPTIMER_CTRL_IP 0x10 /* interrupt flag/pending */
+#define GPTIMER_CTRL_CH 0x20 /* Chain with previous timer */
+
+typedef struct {
+ volatile unsigned int scalar;
+ volatile unsigned int scalar_reload;
+ volatile unsigned int config;
+ volatile unsigned int unused;
+ volatile ambapp_dev_gptimer_element e[8];
+} ambapp_dev_gptimer;
+
+#endif
diff --git a/include/grlib/greth.h b/include/grlib/greth.h
new file mode 100644
index 0000000000..89c1e49387
--- /dev/null
+++ b/include/grlib/greth.h
@@ -0,0 +1,87 @@
+/* Gaisler.com GRETH 10/100/1000 Ethernet MAC definitions
+ *
+ * (C) Copyright 2010, 2015
+ * Daniel Hellstrom, Cobham Gaisler, daniel@gaisler.com
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __GRLIB_GRETH_H__
+#define __GRLIB_GRETH_H__
+
+#define GRETH_FD 0x10
+#define GRETH_RESET 0x40
+#define GRETH_MII_BUSY 0x8
+#define GRETH_MII_NVALID 0x10
+
+/* MII registers */
+#define GRETH_MII_EXTADV_1000FD 0x00000200
+#define GRETH_MII_EXTADV_1000HD 0x00000100
+#define GRETH_MII_EXTPRT_1000FD 0x00000800
+#define GRETH_MII_EXTPRT_1000HD 0x00000400
+
+#define GRETH_MII_100T4 0x00000200
+#define GRETH_MII_100TXFD 0x00000100
+#define GRETH_MII_100TXHD 0x00000080
+#define GRETH_MII_10FD 0x00000040
+#define GRETH_MII_10HD 0x00000020
+
+#define GRETH_BD_EN 0x800
+#define GRETH_BD_WR 0x1000
+#define GRETH_BD_IE 0x2000
+#define GRETH_BD_LEN 0x7FF
+
+#define GRETH_TXEN 0x1
+#define GRETH_INT_TX 0x8
+#define GRETH_TXI 0x4
+#define GRETH_TXBD_STATUS 0x0001C000
+#define GRETH_TXBD_MORE 0x20000
+#define GRETH_TXBD_IPCS 0x40000
+#define GRETH_TXBD_TCPCS 0x80000
+#define GRETH_TXBD_UDPCS 0x100000
+#define GRETH_TXBD_ERR_LC 0x10000
+#define GRETH_TXBD_ERR_UE 0x4000
+#define GRETH_TXBD_ERR_AL 0x8000
+#define GRETH_TXBD_NUM 128
+#define GRETH_TXBD_NUM_MASK (GRETH_TXBD_NUM-1)
+#define GRETH_TX_BUF_SIZE 2048
+
+#define GRETH_INT_RX 0x4
+#define GRETH_RXEN 0x2
+#define GRETH_RXI 0x8
+#define GRETH_RXBD_STATUS 0xFFFFC000
+#define GRETH_RXBD_ERR_AE 0x4000
+#define GRETH_RXBD_ERR_FT 0x8000
+#define GRETH_RXBD_ERR_CRC 0x10000
+#define GRETH_RXBD_ERR_OE 0x20000
+#define GRETH_RXBD_ERR_LE 0x40000
+#define GRETH_RXBD_IP_DEC 0x80000
+#define GRETH_RXBD_IP_CSERR 0x100000
+#define GRETH_RXBD_UDP_DEC 0x200000
+#define GRETH_RXBD_UDP_CSERR 0x400000
+#define GRETH_RXBD_TCP_DEC 0x800000
+#define GRETH_RXBD_TCP_CSERR 0x1000000
+
+#define GRETH_RXBD_NUM 128
+#define GRETH_RXBD_NUM_MASK (GRETH_RXBD_NUM-1)
+#define GRETH_RX_BUF_SIZE 2048
+
+/* Ethernet configuration registers */
+typedef struct _greth_regs {
+ volatile unsigned int control;
+ volatile unsigned int status;
+ volatile unsigned int esa_msb;
+ volatile unsigned int esa_lsb;
+ volatile unsigned int mdio;
+ volatile unsigned int tx_desc_p;
+ volatile unsigned int rx_desc_p;
+ volatile unsigned int edcl_ip;
+} greth_regs;
+
+/* Ethernet buffer descriptor */
+typedef struct _greth_bd {
+ volatile unsigned int stat;
+ unsigned int addr; /* Buffer address not changed by HW */
+} greth_bd;
+
+#endif
diff --git a/include/grlib/irqmp.h b/include/grlib/irqmp.h
new file mode 100644
index 0000000000..0354d5c21c
--- /dev/null
+++ b/include/grlib/irqmp.h
@@ -0,0 +1,23 @@
+/* GRLIB IRQMP (IRQ Multi-processor controller) definitions
+ *
+ * (C) Copyright 2010, 2015
+ * Daniel Hellstrom, Cobham Gaisler, daniel@gaisler.com
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __GRLIB_IRQMP_H__
+#define __GRLIB_IRQMP_H__
+
+typedef struct {
+ volatile unsigned int ilevel;
+ volatile unsigned int ipend;
+ volatile unsigned int iforce;
+ volatile unsigned int iclear;
+ volatile unsigned int mstatus;
+ volatile unsigned int notused[11];
+ volatile unsigned int cpu_mask[16];
+ volatile unsigned int cpu_force[16];
+} ambapp_dev_irqmp;
+
+#endif
OpenPOWER on IntegriCloud