nand: mxc: Switch NAND SPL to generic SPL

This also fixes support for mx31pdk and tx25, which had been broken by commit
e05e5de7fae5bec79617e113916dac6631251156.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Acked-by: Scott Wood <scottwood@freescale.com>
Tested-by: Fabio Estevam <fabio.estevam@freescale.com>

3 files changed, 29 insertions, 239 deletions

diff --git a/include/configs/mx31pdk.h b/include/configs/mx31pdk.h
index 34e429577e..80ec08e20d 100644
--- a/include/configs/mx31pdk.h
+++ b/include/configs/mx31pdk.h
@@ -45,7 +45,16 @@
 
 #define CONFIG_MACH_TYPE	MACH_TYPE_MX31_3DS
 
-#if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
+#define CONFIG_SPL
+#define CONFIG_SPL_TARGET	"u-boot-with-spl.bin"
+#define CONFIG_SPL_LDSCRIPT	"arch/$(ARCH)/cpu/u-boot-spl.lds"
+#define CONFIG_SPL_MAX_SIZE	2048
+#define CONFIG_SPL_NAND_SUPPORT
+
+#define CONFIG_SPL_TEXT_BASE	0x87dc0000
+#define CONFIG_SYS_TEXT_BASE	0x87e00000
+
+#ifndef CONFIG_SPL_BUILD
 #define CONFIG_SKIP_LOWLEVEL_INIT
 #endif
 
@@ -116,7 +125,7 @@
 	"bootcmd=run bootcmd_net\0"					\
 	"bootcmd_net=run bootargs_base bootargs_mtd bootargs_nfs; "	\
 		"tftpboot 0x81000000 uImage-mx31; bootm\0"		\
-	"prg_uboot=tftpboot 0x81000000 u-boot-nand.bin; "		\
+	"prg_uboot=tftpboot 0x81000000 u-boot-with-spl.bin; "		\
 		"nand erase 0x0 0x40000; "				\
 		"nand write 0x81000000 0x0 0x40000\0"
 
@@ -163,7 +172,7 @@
 #define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - \
 						GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_ADDR	(CONFIG_SYS_INIT_RAM_ADDR + \
-						CONFIG_SYS_GBL_DATA_OFFSET)
+						CONFIG_SYS_INIT_RAM_SIZE)
 
 /*-----------------------------------------------------------------------
  * FLASH and environment organization
@@ -189,10 +198,10 @@
 /* NAND configuration for the NAND_SPL */
 
 /* Start copying real U-boot from the second page */
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x800
-#define CONFIG_SYS_NAND_U_BOOT_SIZE	0x30000
+#define CONFIG_SYS_NAND_U_BOOT_OFFS	CONFIG_SPL_PAD_TO
+#define CONFIG_SYS_NAND_U_BOOT_SIZE	0x3f800
 /* Load U-Boot to this address */
-#define CONFIG_SYS_NAND_U_BOOT_DST	0x87f00000
+#define CONFIG_SYS_NAND_U_BOOT_DST	CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_NAND_U_BOOT_DST
 
 #define CONFIG_SYS_NAND_PAGE_SIZE	0x800
diff --git a/include/configs/tx25.h b/include/configs/tx25.h
index 80194d824c..e72f8f66b1 100644
--- a/include/configs/tx25.h
+++ b/include/configs/tx25.h
@@ -21,6 +21,7 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#include <asm/arch/imx-regs.h>
 
 /*
  * KARO TX25 board - SoC Configuration
@@ -31,8 +32,14 @@
 
 #define	CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* 256 kB for U-Boot */
 
-/* NAND BOOT is the only boot method */
-#define CONFIG_NAND_U_BOOT
+#define CONFIG_SPL
+#define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"
+#define CONFIG_SPL_LDSCRIPT		"arch/$(ARCH)/cpu/u-boot-spl.lds"
+#define CONFIG_SPL_MAX_SIZE		2048
+#define CONFIG_SPL_NAND_SUPPORT
+
+#define CONFIG_SPL_TEXT_BASE		0x810c0000
+#define CONFIG_SYS_TEXT_BASE		0x81200000
 
 #ifndef MACH_TYPE_TX25
 #define MACH_TYPE_TX25	2177
@@ -40,16 +47,16 @@
 
 #define CONFIG_MACH_TYPE MACH_TYPE_TX25
 
-#ifdef CONFIG_NAND_SPL
+#ifdef CONFIG_SPL_BUILD
 /* Start copying real U-boot from the second page */
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x800
+#define CONFIG_SYS_NAND_U_BOOT_OFFS	CONFIG_SPL_PAD_TO
 #define CONFIG_SYS_NAND_U_BOOT_SIZE	0x30000
 
-#define CONFIG_SYS_NAND_U_BOOT_DST      (0x81200000)
+#define CONFIG_SYS_NAND_U_BOOT_DST      CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_NAND_U_BOOT_DST
 
 #define CONFIG_SYS_NAND_PAGE_SIZE	2048
-#define CONFIG_SYS_NAND_SPARE_SIZE	64
+#define CONFIG_SYS_NAND_OOBSIZE		64
 #define CONFIG_SYS_NAND_BLOCK_SIZE	(128 * 1024)
 #define CONFIG_SYS_NAND_PAGE_COUNT	64
 #define CONFIG_SYS_NAND_SIZE		(128 * 1024 * 1024)
@@ -173,7 +180,6 @@
 
 /* additions for new relocation code, must be added to all boards */
 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x1000 - /* Fix this */ \
-					GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR		(IMX_RAM_BASE + IMX_RAM_SIZE)
 
 #endif /* __CONFIG_H */
diff --git a/include/fsl_nfc.h b/include/fsl_nfc.h
deleted file mode 100644
index 48a6448977..0000000000
--- a/include/fsl_nfc.h
+++ /dev/null
@@ -1,225 +0,0 @@
-/*
- * (c) 2009 Magnus Lilja <lilja.magnus@gmail.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __FSL_NFC_H
-#define __FSL_NFC_H
-
-/*
- * Register map and bit definitions for the Freescale NAND Flash Controller
- * present in various i.MX devices.
- *
- * MX31 and MX27 have version 1, which has:
- *	4 512-byte main buffers and
- *	4 16-byte spare buffers
- *	to support up to 2K byte pagesize nand.
- *	Reading or writing a 2K page requires 4 FDI/FDO cycles.
- *
- * MX25 and MX35 have version 2.1, and MX51 and MX53 have version 3.2, which
- * have:
- *	8 512-byte main buffers and
- *	8 64-byte spare buffers
- *	to support up to 4K byte pagesize nand.
- *	Reading or writing a 2K or 4K page requires only 1 FDI/FDO cycle.
- *	Also some of registers are moved and/or changed meaning as seen below.
- */
-#if defined(CONFIG_MX27) || defined(CONFIG_MX31)
-#define MXC_NFC_V1
-#define is_mxc_nfc_1()		1
-#define is_mxc_nfc_21()		0
-#define is_mxc_nfc_32()		0
-#elif defined(CONFIG_MX25) || defined(CONFIG_MX35)
-#define MXC_NFC_V2_1
-#define is_mxc_nfc_1()		0
-#define is_mxc_nfc_21()		1
-#define is_mxc_nfc_32()		0
-#elif defined(CONFIG_MX51) || defined(CONFIG_MX53)
-#define MXC_NFC_V3
-#define MXC_NFC_V3_2
-#define is_mxc_nfc_1()		0
-#define is_mxc_nfc_21()		0
-#define is_mxc_nfc_32()		1
-#else
-#error "MXC NFC implementation not supported"
-#endif
-#define is_mxc_nfc_3()		is_mxc_nfc_32()
-
-#if defined(MXC_NFC_V1)
-#define NAND_MXC_NR_BUFS		4
-#define NAND_MXC_SPARE_BUF_SIZE		16
-#define NAND_MXC_REG_OFFSET		0xe00
-#define NAND_MXC_2K_MULTI_CYCLE
-#elif defined(MXC_NFC_V2_1) || defined(MXC_NFC_V3_2)
-#define NAND_MXC_NR_BUFS		8
-#define NAND_MXC_SPARE_BUF_SIZE		64
-#define NAND_MXC_REG_OFFSET		0x1e00
-#endif
-
-struct fsl_nfc_regs {
-	u8 main_area[NAND_MXC_NR_BUFS][0x200];
-	u8 spare_area[NAND_MXC_NR_BUFS][NAND_MXC_SPARE_BUF_SIZE];
-	/*
-	 * reserved size is offset of nfc registers
-	 * minus total main and spare sizes
-	 */
-	u8 reserved1[NAND_MXC_REG_OFFSET
-		- NAND_MXC_NR_BUFS * (512 + NAND_MXC_SPARE_BUF_SIZE)];
-#if defined(MXC_NFC_V1)
-	u16 buf_size;
-	u16 reserved2;
-	u16 buf_addr;
-	u16 flash_addr;
-	u16 flash_cmd;
-	u16 config;
-	u16 ecc_status_result;
-	u16 rsltmain_area;
-	u16 rsltspare_area;
-	u16 wrprot;
-	u16 unlockstart_blkaddr;
-	u16 unlockend_blkaddr;
-	u16 nf_wrprst;
-	u16 config1;
-	u16 config2;
-#elif defined(MXC_NFC_V2_1)
-	u16 reserved2[2];
-	u16 buf_addr;
-	u16 flash_addr;
-	u16 flash_cmd;
-	u16 config;
-	u32 ecc_status_result;
-	u16 spare_area_size;
-	u16 wrprot;
-	u16 reserved3[2];
-	u16 nf_wrprst;
-	u16 config1;
-	u16 config2;
-	u16 reserved4;
-	u16 unlockstart_blkaddr;
-	u16 unlockend_blkaddr;
-	u16 unlockstart_blkaddr1;
-	u16 unlockend_blkaddr1;
-	u16 unlockstart_blkaddr2;
-	u16 unlockend_blkaddr2;
-	u16 unlockstart_blkaddr3;
-	u16 unlockend_blkaddr3;
-#elif defined(MXC_NFC_V3_2)
-	u32 flash_cmd;
-	u32 flash_addr[12];
-	u32 config1;
-	u32 ecc_status_result;
-	u32 status_sum;
-	u32 launch;
-#endif
-};
-
-#ifdef MXC_NFC_V3_2
-struct fsl_nfc_ip_regs {
-	u32 wrprot;
-	u32 wrprot_unlock_blkaddr[8];
-	u32 config2;
-	u32 config3;
-	u32 ipc;
-	u32 err_addr;
-	u32 delay_line;
-};
-#endif
-
-/* Set FCMD to 1, rest to 0 for Command operation */
-#define NFC_CMD				0x1
-
-/* Set FADD to 1, rest to 0 for Address operation */
-#define NFC_ADDR			0x2
-
-/* Set FDI to 1, rest to 0 for Input operation */
-#define NFC_INPUT			0x4
-
-/* Set FDO to 001, rest to 0 for Data Output operation */
-#define NFC_OUTPUT			0x8
-
-/* Set FDO to 010, rest to 0 for Read ID operation */
-#define NFC_ID				0x10
-
-/* Set FDO to 100, rest to 0 for Read Status operation */
-#define NFC_STATUS			0x20
-
-#if defined(MXC_NFC_V1) || defined(MXC_NFC_V2_1)
-#define NFC_CONFIG1_SP_EN		(1 << 2)
-#define NFC_CONFIG1_RST			(1 << 6)
-#define NFC_CONFIG1_CE			(1 << 7)
-#elif defined(MXC_NFC_V3_2)
-#define NFC_CONFIG1_SP_EN		(1 << 0)
-#define NFC_CONFIG1_CE			(1 << 1)
-#define NFC_CONFIG1_RST			(1 << 2)
-#endif
-#define NFC_V1_V2_CONFIG1_ECC_EN	(1 << 3)
-#define NFC_V1_V2_CONFIG1_INT_MSK	(1 << 4)
-#define NFC_V1_V2_CONFIG1_BIG		(1 << 5)
-#define NFC_V2_CONFIG1_ECC_MODE_4	(1 << 0)
-#define NFC_V2_CONFIG1_ONE_CYCLE	(1 << 8)
-#define NFC_V2_CONFIG1_FP_INT		(1 << 11)
-#define NFC_V3_CONFIG1_RBA_MASK		(0x7 << 4)
-#define NFC_V3_CONFIG1_RBA(x)		(((x) & 0x7) << 4)
-
-#define NFC_V1_V2_CONFIG2_INT		(1 << 15)
-#define NFC_V3_CONFIG2_PS_MASK		(0x3 << 0)
-#define NFC_V3_CONFIG2_PS_512		(0 << 0)
-#define NFC_V3_CONFIG2_PS_2048		(1 << 0)
-#define NFC_V3_CONFIG2_PS_4096		(2 << 0)
-#define NFC_V3_CONFIG2_ONE_CYCLE	(1 << 2)
-#define NFC_V3_CONFIG2_ECC_EN		(1 << 3)
-#define NFC_V3_CONFIG2_2CMD_PHASES	(1 << 4)
-#define NFC_V3_CONFIG2_NUM_ADDR_PH0	(1 << 5)
-#define NFC_V3_CONFIG2_ECC_MODE_8	(1 << 6)
-#define NFC_V3_CONFIG2_PPB_MASK		(0x3 << 7)
-#define NFC_V3_CONFIG2_PPB(x)		(((x) & 0x3) << 7)
-#define NFC_V3_CONFIG2_EDC_MASK		(0x7 << 9)
-#define NFC_V3_CONFIG2_EDC(x)		(((x) & 0x7) << 9)
-#define NFC_V3_CONFIG2_NUM_ADDR_PH1(x)	(((x) & 0x3) << 12)
-#define NFC_V3_CONFIG2_INT_MSK		(1 << 15)
-#define NFC_V3_CONFIG2_SPAS_MASK	(0xff << 16)
-#define NFC_V3_CONFIG2_SPAS(x)		(((x) & 0xff) << 16)
-#define NFC_V3_CONFIG2_ST_CMD_MASK	(0xff << 24)
-#define NFC_V3_CONFIG2_ST_CMD(x)	(((x) & 0xff) << 24)
-
-#define NFC_V3_CONFIG3_ADD_OP(x)	(((x) & 0x3) << 0)
-#define NFC_V3_CONFIG3_FW8		(1 << 3)
-#define NFC_V3_CONFIG3_SBB(x)		(((x) & 0x7) << 8)
-#define NFC_V3_CONFIG3_NUM_OF_DEVS(x)	(((x) & 0x7) << 12)
-#define NFC_V3_CONFIG3_RBB_MODE		(1 << 15)
-#define NFC_V3_CONFIG3_NO_SDMA		(1 << 20)
-
-#define NFC_V3_WRPROT_UNLOCK		(1 << 2)
-#define NFC_V3_WRPROT_BLS_UNLOCK	(2 << 6)
-
-#define NFC_V3_IPC_CREQ			(1 << 0)
-#define NFC_V3_IPC_INT			(1 << 31)
-
-#if defined(MXC_NFC_V1) || defined(MXC_NFC_V2_1)
-#define operation	config2
-#define readnfc		readw
-#define writenfc	writew
-#elif defined(MXC_NFC_V3_2)
-#define operation	launch
-#define readnfc		readl
-#define writenfc	writel
-#endif
-
-#endif /* __FSL_NFC_H */