From da962b71758d52b38a4ed89380d296ed25920d18 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Beno=C3=AEt=20Th=C3=A9baudeau?= Date: Thu, 11 Apr 2013 09:35:51 +0000 Subject: nand: mxc: Switch NAND SPL to generic SPL MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This also fixes support for mx31pdk and tx25, which had been broken by commit e05e5de7fae5bec79617e113916dac6631251156. Signed-off-by: Benoît Thébaudeau Acked-by: Scott Wood Tested-by: Fabio Estevam --- include/configs/mx31pdk.h | 21 +++-- include/configs/tx25.h | 22 +++-- include/fsl_nfc.h | 225 ---------------------------------------------- 3 files changed, 29 insertions(+), 239 deletions(-) delete mode 100644 include/fsl_nfc.h (limited to 'include') diff --git a/include/configs/mx31pdk.h b/include/configs/mx31pdk.h index 34e429577e..80ec08e20d 100644 --- a/include/configs/mx31pdk.h +++ b/include/configs/mx31pdk.h @@ -45,7 +45,16 @@ #define CONFIG_MACH_TYPE MACH_TYPE_MX31_3DS -#if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) +#define CONFIG_SPL +#define CONFIG_SPL_TARGET "u-boot-with-spl.bin" +#define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds" +#define CONFIG_SPL_MAX_SIZE 2048 +#define CONFIG_SPL_NAND_SUPPORT + +#define CONFIG_SPL_TEXT_BASE 0x87dc0000 +#define CONFIG_SYS_TEXT_BASE 0x87e00000 + +#ifndef CONFIG_SPL_BUILD #define CONFIG_SKIP_LOWLEVEL_INIT #endif @@ -116,7 +125,7 @@ "bootcmd=run bootcmd_net\0" \ "bootcmd_net=run bootargs_base bootargs_mtd bootargs_nfs; " \ "tftpboot 0x81000000 uImage-mx31; bootm\0" \ - "prg_uboot=tftpboot 0x81000000 u-boot-nand.bin; " \ + "prg_uboot=tftpboot 0x81000000 u-boot-with-spl.bin; " \ "nand erase 0x0 0x40000; " \ "nand write 0x81000000 0x0 0x40000\0" @@ -163,7 +172,7 @@ #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_GBL_DATA_OFFSET) + CONFIG_SYS_INIT_RAM_SIZE) /*----------------------------------------------------------------------- * FLASH and environment organization @@ -189,10 +198,10 @@ /* NAND configuration for the NAND_SPL */ /* Start copying real U-boot from the second page */ -#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x800 -#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x30000 +#define CONFIG_SYS_NAND_U_BOOT_OFFS CONFIG_SPL_PAD_TO +#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x3f800 /* Load U-Boot to this address */ -#define CONFIG_SYS_NAND_U_BOOT_DST 0x87f00000 +#define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST #define CONFIG_SYS_NAND_PAGE_SIZE 0x800 diff --git a/include/configs/tx25.h b/include/configs/tx25.h index 80194d824c..e72f8f66b1 100644 --- a/include/configs/tx25.h +++ b/include/configs/tx25.h @@ -21,6 +21,7 @@ #ifndef __CONFIG_H #define __CONFIG_H +#include /* * KARO TX25 board - SoC Configuration @@ -31,8 +32,14 @@ #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* 256 kB for U-Boot */ -/* NAND BOOT is the only boot method */ -#define CONFIG_NAND_U_BOOT +#define CONFIG_SPL +#define CONFIG_SPL_TARGET "u-boot-with-spl.bin" +#define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds" +#define CONFIG_SPL_MAX_SIZE 2048 +#define CONFIG_SPL_NAND_SUPPORT + +#define CONFIG_SPL_TEXT_BASE 0x810c0000 +#define CONFIG_SYS_TEXT_BASE 0x81200000 #ifndef MACH_TYPE_TX25 #define MACH_TYPE_TX25 2177 @@ -40,16 +47,16 @@ #define CONFIG_MACH_TYPE MACH_TYPE_TX25 -#ifdef CONFIG_NAND_SPL +#ifdef CONFIG_SPL_BUILD /* Start copying real U-boot from the second page */ -#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x800 +#define CONFIG_SYS_NAND_U_BOOT_OFFS CONFIG_SPL_PAD_TO #define CONFIG_SYS_NAND_U_BOOT_SIZE 0x30000 -#define CONFIG_SYS_NAND_U_BOOT_DST (0x81200000) +#define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST #define CONFIG_SYS_NAND_PAGE_SIZE 2048 -#define CONFIG_SYS_NAND_SPARE_SIZE 64 +#define CONFIG_SYS_NAND_OOBSIZE 64 #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) #define CONFIG_SYS_NAND_PAGE_COUNT 64 #define CONFIG_SYS_NAND_SIZE (128 * 1024 * 1024) @@ -173,7 +180,6 @@ /* additions for new relocation code, must be added to all boards */ #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - /* Fix this */ \ - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR (IMX_RAM_BASE + IMX_RAM_SIZE) #endif /* __CONFIG_H */ diff --git a/include/fsl_nfc.h b/include/fsl_nfc.h deleted file mode 100644 index 48a6448977..0000000000 --- a/include/fsl_nfc.h +++ /dev/null @@ -1,225 +0,0 @@ -/* - * (c) 2009 Magnus Lilja - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __FSL_NFC_H -#define __FSL_NFC_H - -/* - * Register map and bit definitions for the Freescale NAND Flash Controller - * present in various i.MX devices. - * - * MX31 and MX27 have version 1, which has: - * 4 512-byte main buffers and - * 4 16-byte spare buffers - * to support up to 2K byte pagesize nand. - * Reading or writing a 2K page requires 4 FDI/FDO cycles. - * - * MX25 and MX35 have version 2.1, and MX51 and MX53 have version 3.2, which - * have: - * 8 512-byte main buffers and - * 8 64-byte spare buffers - * to support up to 4K byte pagesize nand. - * Reading or writing a 2K or 4K page requires only 1 FDI/FDO cycle. - * Also some of registers are moved and/or changed meaning as seen below. - */ -#if defined(CONFIG_MX27) || defined(CONFIG_MX31) -#define MXC_NFC_V1 -#define is_mxc_nfc_1() 1 -#define is_mxc_nfc_21() 0 -#define is_mxc_nfc_32() 0 -#elif defined(CONFIG_MX25) || defined(CONFIG_MX35) -#define MXC_NFC_V2_1 -#define is_mxc_nfc_1() 0 -#define is_mxc_nfc_21() 1 -#define is_mxc_nfc_32() 0 -#elif defined(CONFIG_MX51) || defined(CONFIG_MX53) -#define MXC_NFC_V3 -#define MXC_NFC_V3_2 -#define is_mxc_nfc_1() 0 -#define is_mxc_nfc_21() 0 -#define is_mxc_nfc_32() 1 -#else -#error "MXC NFC implementation not supported" -#endif -#define is_mxc_nfc_3() is_mxc_nfc_32() - -#if defined(MXC_NFC_V1) -#define NAND_MXC_NR_BUFS 4 -#define NAND_MXC_SPARE_BUF_SIZE 16 -#define NAND_MXC_REG_OFFSET 0xe00 -#define NAND_MXC_2K_MULTI_CYCLE -#elif defined(MXC_NFC_V2_1) || defined(MXC_NFC_V3_2) -#define NAND_MXC_NR_BUFS 8 -#define NAND_MXC_SPARE_BUF_SIZE 64 -#define NAND_MXC_REG_OFFSET 0x1e00 -#endif - -struct fsl_nfc_regs { - u8 main_area[NAND_MXC_NR_BUFS][0x200]; - u8 spare_area[NAND_MXC_NR_BUFS][NAND_MXC_SPARE_BUF_SIZE]; - /* - * reserved size is offset of nfc registers - * minus total main and spare sizes - */ - u8 reserved1[NAND_MXC_REG_OFFSET - - NAND_MXC_NR_BUFS * (512 + NAND_MXC_SPARE_BUF_SIZE)]; -#if defined(MXC_NFC_V1) - u16 buf_size; - u16 reserved2; - u16 buf_addr; - u16 flash_addr; - u16 flash_cmd; - u16 config; - u16 ecc_status_result; - u16 rsltmain_area; - u16 rsltspare_area; - u16 wrprot; - u16 unlockstart_blkaddr; - u16 unlockend_blkaddr; - u16 nf_wrprst; - u16 config1; - u16 config2; -#elif defined(MXC_NFC_V2_1) - u16 reserved2[2]; - u16 buf_addr; - u16 flash_addr; - u16 flash_cmd; - u16 config; - u32 ecc_status_result; - u16 spare_area_size; - u16 wrprot; - u16 reserved3[2]; - u16 nf_wrprst; - u16 config1; - u16 config2; - u16 reserved4; - u16 unlockstart_blkaddr; - u16 unlockend_blkaddr; - u16 unlockstart_blkaddr1; - u16 unlockend_blkaddr1; - u16 unlockstart_blkaddr2; - u16 unlockend_blkaddr2; - u16 unlockstart_blkaddr3; - u16 unlockend_blkaddr3; -#elif defined(MXC_NFC_V3_2) - u32 flash_cmd; - u32 flash_addr[12]; - u32 config1; - u32 ecc_status_result; - u32 status_sum; - u32 launch; -#endif -}; - -#ifdef MXC_NFC_V3_2 -struct fsl_nfc_ip_regs { - u32 wrprot; - u32 wrprot_unlock_blkaddr[8]; - u32 config2; - u32 config3; - u32 ipc; - u32 err_addr; - u32 delay_line; -}; -#endif - -/* Set FCMD to 1, rest to 0 for Command operation */ -#define NFC_CMD 0x1 - -/* Set FADD to 1, rest to 0 for Address operation */ -#define NFC_ADDR 0x2 - -/* Set FDI to 1, rest to 0 for Input operation */ -#define NFC_INPUT 0x4 - -/* Set FDO to 001, rest to 0 for Data Output operation */ -#define NFC_OUTPUT 0x8 - -/* Set FDO to 010, rest to 0 for Read ID operation */ -#define NFC_ID 0x10 - -/* Set FDO to 100, rest to 0 for Read Status operation */ -#define NFC_STATUS 0x20 - -#if defined(MXC_NFC_V1) || defined(MXC_NFC_V2_1) -#define NFC_CONFIG1_SP_EN (1 << 2) -#define NFC_CONFIG1_RST (1 << 6) -#define NFC_CONFIG1_CE (1 << 7) -#elif defined(MXC_NFC_V3_2) -#define NFC_CONFIG1_SP_EN (1 << 0) -#define NFC_CONFIG1_CE (1 << 1) -#define NFC_CONFIG1_RST (1 << 2) -#endif -#define NFC_V1_V2_CONFIG1_ECC_EN (1 << 3) -#define NFC_V1_V2_CONFIG1_INT_MSK (1 << 4) -#define NFC_V1_V2_CONFIG1_BIG (1 << 5) -#define NFC_V2_CONFIG1_ECC_MODE_4 (1 << 0) -#define NFC_V2_CONFIG1_ONE_CYCLE (1 << 8) -#define NFC_V2_CONFIG1_FP_INT (1 << 11) -#define NFC_V3_CONFIG1_RBA_MASK (0x7 << 4) -#define NFC_V3_CONFIG1_RBA(x) (((x) & 0x7) << 4) - -#define NFC_V1_V2_CONFIG2_INT (1 << 15) -#define NFC_V3_CONFIG2_PS_MASK (0x3 << 0) -#define NFC_V3_CONFIG2_PS_512 (0 << 0) -#define NFC_V3_CONFIG2_PS_2048 (1 << 0) -#define NFC_V3_CONFIG2_PS_4096 (2 << 0) -#define NFC_V3_CONFIG2_ONE_CYCLE (1 << 2) -#define NFC_V3_CONFIG2_ECC_EN (1 << 3) -#define NFC_V3_CONFIG2_2CMD_PHASES (1 << 4) -#define NFC_V3_CONFIG2_NUM_ADDR_PH0 (1 << 5) -#define NFC_V3_CONFIG2_ECC_MODE_8 (1 << 6) -#define NFC_V3_CONFIG2_PPB_MASK (0x3 << 7) -#define NFC_V3_CONFIG2_PPB(x) (((x) & 0x3) << 7) -#define NFC_V3_CONFIG2_EDC_MASK (0x7 << 9) -#define NFC_V3_CONFIG2_EDC(x) (((x) & 0x7) << 9) -#define NFC_V3_CONFIG2_NUM_ADDR_PH1(x) (((x) & 0x3) << 12) -#define NFC_V3_CONFIG2_INT_MSK (1 << 15) -#define NFC_V3_CONFIG2_SPAS_MASK (0xff << 16) -#define NFC_V3_CONFIG2_SPAS(x) (((x) & 0xff) << 16) -#define NFC_V3_CONFIG2_ST_CMD_MASK (0xff << 24) -#define NFC_V3_CONFIG2_ST_CMD(x) (((x) & 0xff) << 24) - -#define NFC_V3_CONFIG3_ADD_OP(x) (((x) & 0x3) << 0) -#define NFC_V3_CONFIG3_FW8 (1 << 3) -#define NFC_V3_CONFIG3_SBB(x) (((x) & 0x7) << 8) -#define NFC_V3_CONFIG3_NUM_OF_DEVS(x) (((x) & 0x7) << 12) -#define NFC_V3_CONFIG3_RBB_MODE (1 << 15) -#define NFC_V3_CONFIG3_NO_SDMA (1 << 20) - -#define NFC_V3_WRPROT_UNLOCK (1 << 2) -#define NFC_V3_WRPROT_BLS_UNLOCK (2 << 6) - -#define NFC_V3_IPC_CREQ (1 << 0) -#define NFC_V3_IPC_INT (1 << 31) - -#if defined(MXC_NFC_V1) || defined(MXC_NFC_V2_1) -#define operation config2 -#define readnfc readw -#define writenfc writew -#elif defined(MXC_NFC_V3_2) -#define operation launch -#define readnfc readl -#define writenfc writel -#endif - -#endif /* __FSL_NFC_H */ -- cgit v1.2.1