Merge branch 'master' of git://www.denx.de/git/u-boot-microblaze

6 files changed, 45 insertions, 23 deletions

diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h
index 27668f2a89..09bfabcfdf 100644
--- a/include/configs/microblaze-generic.h
+++ b/include/configs/microblaze-generic.h
@@ -47,18 +47,6 @@
 #endif
 #define CONFIG_BOARD_LATE_INIT
 
-/* interrupt controller */
-#ifdef XILINX_INTC_BASEADDR
-# define CONFIG_SYS_INTC_0_ADDR		XILINX_INTC_BASEADDR
-# define CONFIG_SYS_INTC_0_NUM		XILINX_INTC_NUM_INTR_INPUTS
-#endif
-
-/* timer */
-#if defined(XILINX_TIMER_BASEADDR) && defined(XILINX_TIMER_IRQ)
-#  define CONFIG_SYS_TIMER_0_ADDR	XILINX_TIMER_BASEADDR
-#  define CONFIG_SYS_TIMER_0_IRQ	XILINX_TIMER_IRQ
-#endif
-
 /* watchdog */
 #if defined(XILINX_WATCHDOG_BASEADDR) && defined(XILINX_WATCHDOG_IRQ)
 # define CONFIG_WATCHDOG_BASEADDR	XILINX_WATCHDOG_BASEADDR
diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h
index 4e066cdfd2..8cea61080d 100644
--- a/include/configs/xilinx_zynqmp.h
+++ b/include/configs/xilinx_zynqmp.h
@@ -26,8 +26,11 @@
 #define CONFIG_SYS_ALT_MEMTEST
 #define CONFIG_SYS_MEMTEST_SCRATCH	0xfffc0000
 
-#define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_MEMTEST_END		CONFIG_SYS_SDRAM_SIZE
+#ifndef CONFIG_NR_DRAM_BANKS
+# define CONFIG_NR_DRAM_BANKS		2
+#endif
+#define CONFIG_SYS_MEMTEST_START	0
+#define CONFIG_SYS_MEMTEST_END		1000
 
 /* Have release address at the end of 256MB for now */
 #define CPU_RELEASE_ADDR	0xFFFFFF0
@@ -39,7 +42,7 @@
 # define CONFIG_IDENT_STRING		" Xilinx ZynqMP"
 #endif
 
-#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x7fff0)
+#define CONFIG_SYS_INIT_SP_ADDR		CONFIG_SYS_TEXT_BASE
 
 /* Flat Device Tree Definitions */
 
@@ -68,6 +71,7 @@
 #define CONFIG_CMD_FAT
 #define CONFIG_CMD_FS_GENERIC
 #define CONFIG_DOS_PARTITION
+#define CONFIG_EFI_PARTITION
 #define CONFIG_MP
 
 #define CONFIG_CMD_MII
@@ -93,6 +97,9 @@
 # ifndef CONFIG_ZYNQ_SDHCI_MAX_FREQ
 #  define CONFIG_ZYNQ_SDHCI_MAX_FREQ	200000000
 # endif
+#endif
+
+#if defined(CONFIG_ZYNQ_SDHCI) || defined(CONFIG_ZYNQMP_USB)
 # define CONFIG_FAT_WRITE
 # define CONFIG_CMD_EXT4_WRITE
 #endif
@@ -168,7 +175,7 @@
 
 #define CONFIG_PREBOOT		"run bootargs"
 #define CONFIG_BOOTCOMMAND	"run $modeboot"
-#define CONFIG_BOOTDELAY	5
+#define CONFIG_BOOTDELAY	3
 
 #define CONFIG_BOARD_LATE_INIT
 
@@ -181,7 +188,6 @@
 #define CONFIG_SYS_CBSIZE		2048
 #define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
 					sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_HUSH_PARSER
 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
 #define CONFIG_SYS_LONGHELP
 #define CONFIG_CMDLINE_EDITING
@@ -221,7 +227,7 @@
 #define CONFIG_LIBATA
 #define CONFIG_SCSI_AHCI
 #define CONFIG_SCSI_AHCI_PLAT
-#define CONFIG_SYS_SCSI_MAX_SCSI_ID	1
+#define CONFIG_SYS_SCSI_MAX_SCSI_ID	2
 #define CONFIG_SYS_SCSI_MAX_LUN		1
 #define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
 					 CONFIG_SYS_SCSI_MAX_LUN)
diff --git a/include/configs/xilinx_zynqmp_ep.h b/include/configs/xilinx_zynqmp_ep.h
index 337312e58c..aa58b62531 100644
--- a/include/configs/xilinx_zynqmp_ep.h
+++ b/include/configs/xilinx_zynqmp_ep.h
@@ -22,11 +22,6 @@
 #define CONFIG_ZYNQMP_XHCI_LIST {ZYNQMP_USB0_XHCI_BASEADDR, \
 				 ZYNQMP_USB1_XHCI_BASEADDR}
 
-/* Physical Memory Map */
-#define CONFIG_NR_DRAM_BANKS		1
-#define CONFIG_SYS_SDRAM_BASE		0
-#define CONFIG_SYS_SDRAM_SIZE		0x40000000
-
 #define COUNTER_FREQUENCY	4000000
 
 #include <configs/xilinx_zynqmp.h>
diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h
index c2ed28af14..d8e3fa4e5a 100644
--- a/include/configs/zynq-common.h
+++ b/include/configs/zynq-common.h
@@ -47,6 +47,7 @@
 # define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
 # define CONFIG_PHY_MARVELL
 # define CONFIG_PHY_REALTEK
+# define CONFIG_PHY_XILINX
 # define CONFIG_BOOTP_SERVERIP
 # define CONFIG_BOOTP_BOOTPATH
 # define CONFIG_BOOTP_GATEWAY
@@ -202,7 +203,11 @@
 # define CONFIG_ENV_OFFSET		0xE0000
 #endif
 
+/* enable preboot to be loaded before CONFIG_BOOTDELAY */
+#define CONFIG_PREBOOT
+
 /* Default environment */
+#ifndef CONFIG_EXTRA_ENV_SETTINGS
 #define CONFIG_EXTRA_ENV_SETTINGS	\
 	"fit_image=fit.itb\0"		\
 	"load_addr=0x2000000\0"		\
@@ -211,6 +216,29 @@
 	"nor_flash_off=0xE2100000\0"	\
 	"fdt_high=0x20000000\0"		\
 	"initrd_high=0x20000000\0"	\
+	"loadbootenv_addr=0x2000000\0" \
+	"bootenv=uEnv.txt\0" \
+	"bootenv_dev=mmc\0" \
+	"loadbootenv=load ${bootenv_dev} 0 ${loadbootenv_addr} ${bootenv}\0" \
+	"importbootenv=echo Importing environment from ${bootenv_dev} ...; " \
+		"env import -t ${loadbootenv_addr} $filesize\0" \
+	"bootenv_existence_test=test -e ${bootenv_dev} 0 /${bootenv}\0" \
+	"setbootenv=if env run bootenv_existence_test; then " \
+			"if env run loadbootenv; then " \
+				"env run importbootenv; " \
+			"fi; " \
+		"fi; \0" \
+	"sd_loadbootenv=set bootenv_dev mmc && " \
+			"run setbootenv \0" \
+	"usb_loadbootenv=set bootenv_dev usb && usb start && run setbootenv \0" \
+	"preboot=if test $modeboot = sdboot; then " \
+			"run sd_loadbootenv; " \
+			"echo Checking if uenvcmd is set ...; " \
+			"if test -n $uenvcmd; then " \
+				"echo Running uenvcmd ...; " \
+				"run uenvcmd; " \
+			"fi; " \
+		"fi; \0" \
 	"norboot=echo Copying FIT from NOR flash to RAM... && " \
 		"cp.b ${nor_flash_off} ${load_addr} ${fit_size} && " \
 		"bootm ${load_addr}\0" \
@@ -225,6 +253,7 @@
 			"load usb 0 ${load_addr} ${fit_image} && " \
 			"bootm ${load_addr}; fi\0" \
 		DFU_ALT_INFO
+#endif
 
 #define CONFIG_BOOTCOMMAND		"run $modeboot"
 #define CONFIG_BOOTDELAY		3 /* -1 to Disable autoboot */
diff --git a/include/configs/zynq_zybo.h b/include/configs/zynq_zybo.h
index 0882fe36bd..637b1c5ffe 100644
--- a/include/configs/zynq_zybo.h
+++ b/include/configs/zynq_zybo.h
@@ -17,6 +17,9 @@
 #define CONFIG_ZYNQ_I2C0
 #define CONFIG_ZYNQ_I2C1
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	1
+#define CONFIG_CMD_EEPROM
+#define CONFIG_ZYNQ_GEM_EEPROM_ADDR	0x50
+#define CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET	0xFA
 #define CONFIG_DISPLAY
 #define CONFIG_I2C_EDID
 
diff --git a/include/phy.h b/include/phy.h
index 09bbe483a4..21459a8c80 100644
--- a/include/phy.h
+++ b/include/phy.h
@@ -264,6 +264,7 @@ int phy_smsc_init(void);
 int phy_teranetics_init(void);
 int phy_ti_init(void);
 int phy_vitesse_init(void);
+int phy_xilinx_init(void);
 
 int board_phy_config(struct phy_device *phydev);
 int get_phy_id(struct mii_dev *bus, int addr, int devad, u32 *phy_id);