Merge branch 'master' of git://git.denx.de/u-boot-tegra

3 files changed, 104 insertions, 1 deletions

diff --git a/include/configs/p2771-0000.h b/include/configs/p2771-0000.h
new file mode 100644
index 0000000000..257283f3b9
--- /dev/null
+++ b/include/configs/p2771-0000.h
@@ -0,0 +1,33 @@
+/*
+ * Copyright (c) 2013-2016, NVIDIA CORPORATION.
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#ifndef _P2771_0000_H
+#define _P2771_0000_H
+
+#include <linux/sizes.h>
+
+#include "tegra186-common.h"
+
+/* High-level configuration options */
+#define CONFIG_TEGRA_BOARD_STRING	"NVIDIA P2771-0000"
+
+/* SD/MMC */
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_TEGRA_MMC
+
+/* Environment in eMMC, at the end of 2nd "boot sector" */
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_SYS_MMC_ENV_DEV		0
+#define CONFIG_SYS_MMC_ENV_PART		2
+#define CONFIG_ENV_OFFSET		(-CONFIG_ENV_SIZE)
+
+#include "tegra-common-post.h"
+
+/* Crystal is 38.4MHz. clk_m runs at half that rate */
+#define COUNTER_FREQUENCY	19200000
+
+#endif
diff --git a/include/configs/tegra-common.h b/include/configs/tegra-common.h
index 92d4dd8e51..7b0940a7f2 100644
--- a/include/configs/tegra-common.h
+++ b/include/configs/tegra-common.h
@@ -111,7 +111,6 @@
 						CONFIG_SYS_INIT_RAM_SIZE - \
 						GENERATED_GBL_DATA_SIZE)
 
-#define CONFIG_TEGRA_GPIO
 #define CONFIG_CMD_ENTERRCM
 
 /* Defines for SPL */
diff --git a/include/configs/tegra186-common.h b/include/configs/tegra186-common.h
new file mode 100644
index 0000000000..aa7b9d038a
--- /dev/null
+++ b/include/configs/tegra186-common.h
@@ -0,0 +1,71 @@
+/*
+ * Copyright 2013-2016, NVIDIA CORPORATION.
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#ifndef _TEGRA186_COMMON_H_
+#define _TEGRA186_COMMON_H_
+
+#include "tegra-common.h"
+
+/* Cortex-A57 uses a cache line size of 64 bytes */
+#define CONFIG_SYS_CACHELINE_SIZE	64
+
+/*
+ * NS16550 Configuration
+ */
+#define V_NS16550_CLK		408000000	/* 408MHz (pllp_out0) */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_STACKBASE	0x82800000	/* 40MB */
+
+/*-----------------------------------------------------------------------
+ * Physical Memory Map
+ */
+
+#define CONFIG_SYS_TEXT_BASE	0x80080000
+
+/* Generic Interrupt Controller */
+#define CONFIG_GICV2
+
+/*
+ * Memory layout for where various images get loaded by boot scripts:
+ *
+ * scriptaddr can be pretty much anywhere that doesn't conflict with something
+ *   else. Put it above BOOTMAPSZ to eliminate conflicts.
+ *
+ * pxefile_addr_r can be pretty much anywhere that doesn't conflict with
+ *   something else. Put it above BOOTMAPSZ to eliminate conflicts.
+ *
+ * kernel_addr_r must be within the first 128M of RAM in order for the
+ *   kernel's CONFIG_AUTO_ZRELADDR option to work. Since the kernel will
+ *   decompress itself to 0x8000 after the start of RAM, kernel_addr_r
+ *   should not overlap that area, or the kernel will have to copy itself
+ *   somewhere else before decompression. Similarly, the address of any other
+ *   data passed to the kernel shouldn't overlap the start of RAM. Pushing
+ *   this up to 16M allows for a sizable kernel to be decompressed below the
+ *   compressed load address.
+ *
+ * fdt_addr_r simply shouldn't overlap anything else. Choosing 32M allows for
+ *   the compressed kernel to be up to 16M too.
+ *
+ * ramdisk_addr_r simply shouldn't overlap anything else. Choosing 33M allows
+ *   for the FDT/DTB to be up to 1M, which is hopefully plenty.
+ */
+#define CONFIG_LOADADDR 0x80080000
+#define MEM_LAYOUT_ENV_SETTINGS \
+	"scriptaddr=0x90000000\0" \
+	"pxefile_addr_r=0x90100000\0" \
+	"kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
+	"fdt_addr_r=0x82000000\0" \
+	"ramdisk_addr_r=0x82100000\0"
+
+/* Defines for SPL */
+#define CONFIG_SPL_TEXT_BASE		0x80108000
+#define CONFIG_SYS_SPL_MALLOC_START	0x80090000
+#define CONFIG_SPL_STACK		0x800ffffc
+
+#endif