rename CFG_ macros to CONFIG_SYS

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

2 files changed, 40 insertions, 40 deletions

diff --git a/board/nx823/flash.c b/board/nx823/flash.c
index 581925e48b..194d841e4e 100644
--- a/board/nx823/flash.c
+++ b/board/nx823/flash.c
@@ -27,7 +27,7 @@
 #include <common.h>
 #include <mpc8xx.h>
 
-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
 extern u_long  *my_sernum;		/* from nx823.c */
 
 /*-----------------------------------------------------------------------
@@ -63,13 +63,13 @@ static void  flash_get_offsets (ulong base, flash_info_t *info);
 
 unsigned long flash_init (void)
 {
-	volatile immap_t     *immap  = (immap_t *)CFG_IMMR;
+	volatile immap_t     *immap  = (immap_t *)CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	unsigned long size_b0;
 	int i;
 
 	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
@@ -82,18 +82,18 @@ unsigned long flash_init (void)
 	}
 
 	/* Remap FLASH according to real size */
-	memctl->memc_or0 = CFG_OR_TIMING_FLASH | (-size_b0 & 0xFFFF8000);
-	memctl->memc_br0 = (CFG_FLASH_BASE & BR_BA_MSK) | BR_PS_16 | BR_MS_GPCM | BR_V;
+	memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size_b0 & 0xFFFF8000);
+	memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | BR_PS_16 | BR_MS_GPCM | BR_V;
 
 	/* Re-do sizing to get full correct info */
-	size_b0 = flash_get_size((FPW *)CFG_FLASH_BASE, &flash_info[0]);
+	size_b0 = flash_get_size((FPW *)CONFIG_SYS_FLASH_BASE, &flash_info[0]);
 
-	flash_get_offsets (CFG_FLASH_BASE, &flash_info[0]);
+	flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]);
 
 	/* monitor protection ON by default */
 	(void)flash_protect(FLAG_PROTECT_SET,
-			    CFG_FLASH_BASE,
-			    CFG_FLASH_BASE+monitor_flash_len-1,
+			    CONFIG_SYS_FLASH_BASE,
+			    CONFIG_SYS_FLASH_BASE+monitor_flash_len-1,
 			    &flash_info[0]);
 
 	flash_info[0].size = size_b0;
@@ -220,10 +220,10 @@ static ulong flash_get_size (FPW *addr, flash_info_t *info)
 		break;
 	}
 
-	if (info->sector_count > CFG_MAX_FLASH_SECT) {
+	if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
 		printf ("** ERROR: sector count %d > max (%d) **\n",
-			info->sector_count, CFG_MAX_FLASH_SECT);
-		info->sector_count = CFG_MAX_FLASH_SECT;
+			info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
+		info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
 	}
 
 	addr[0] = (FPW)0x00FF00FF;      /* restore read mode */
@@ -294,7 +294,7 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)
 			udelay (1000);
 
 			while (((status = *addr) & (FPW)0x00800080) != (FPW)0x00800080) {
-				if ((now=get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+				if ((now=get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 					printf ("Timeout\n");
 					*addr = (FPW)0x00B000B0; /* suspend erase	  */
 					*addr = (FPW)0x00FF00FF; /* reset to read mode */
@@ -343,9 +343,9 @@ int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
 #endif
 
 	/* save sernum if needed */
-	if (addr >= CFG_FLASH_SN_SECTOR && addr < CFG_FLASH_SN_BASE)
+	if (addr >= CONFIG_SYS_FLASH_SN_SECTOR && addr < CONFIG_SYS_FLASH_SN_BASE)
 	{
-		u_long dest = CFG_FLASH_SN_BASE;
+		u_long dest = CONFIG_SYS_FLASH_SN_BASE;
 		u_short *sn = (u_short *)my_sernum;
 
 		printf("(saving sernum)");
@@ -452,7 +452,7 @@ static int write_data (flash_info_t *info, ulong dest, FPW data)
 	start = get_timer (0);
 
 	while (((status = *addr) & (FPW)0x00800080) != (FPW)0x00800080) {
-		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			*addr = (FPW)0x00FF00FF;	/* restore read mode */
 			return (1);
 		}
diff --git a/board/nx823/nx823.c b/board/nx823/nx823.c
index 18840ff48f..df9aaab7a7 100644
--- a/board/nx823/nx823.c
+++ b/board/nx823/nx823.c
@@ -159,7 +159,7 @@ int checkboard (void)
 
 phys_size_t initdram (int board_type)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	long int size_b0, size_b1, size8, size9;
 
@@ -170,22 +170,22 @@ phys_size_t initdram (int board_type)
 	 * Up to 2 Banks of 64Mbit x 2 devices
 	 * Initial builds only have 1
 	 */
-	memctl->memc_mptpr = CFG_MPTPR_1BK_4K;
+	memctl->memc_mptpr = CONFIG_SYS_MPTPR_1BK_4K;
 	memctl->memc_mar = 0x00000088;
 
 	/*
 	 * Map controller SDRAM bank 0
 	 */
-	memctl->memc_or1 = CFG_OR1_PRELIM;
-	memctl->memc_br1 = CFG_BR1_PRELIM;
-	memctl->memc_mamr = CFG_MAMR_8COL & (~(MAMR_PTAE));	/* no refresh yet */
+	memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM;
+	memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM;
+	memctl->memc_mamr = CONFIG_SYS_MAMR_8COL & (~(MAMR_PTAE));	/* no refresh yet */
 	udelay (200);
 
 	/*
 	 * Map controller SDRAM bank 1
 	 */
-	memctl->memc_or2 = CFG_OR2_PRELIM;
-	memctl->memc_br2 = CFG_BR2_PRELIM;
+	memctl->memc_or2 = CONFIG_SYS_OR2_PRELIM;
+	memctl->memc_br2 = CONFIG_SYS_BR2_PRELIM;
 
 	/*
 	 * Perform SDRAM initializsation sequence
@@ -209,7 +209,7 @@ phys_size_t initdram (int board_type)
 	 * with two SDRAM banks or four cycles every 31.2 us with one
 	 * bank. It will be adjusted after memory sizing.
 	 */
-	memctl->memc_mptpr = CFG_MPTPR_2BK_8K;
+	memctl->memc_mptpr = CONFIG_SYS_MPTPR_2BK_8K;
 
 	memctl->memc_mar = 0x00000088;
 
@@ -219,7 +219,7 @@ phys_size_t initdram (int board_type)
 	 *
 	 * try 8 column mode
 	 */
-	size8 = dram_size (CFG_MAMR_8COL, (long *) SDRAM_BASE1_PRELIM,
+	size8 = dram_size (CONFIG_SYS_MAMR_8COL, (long *) SDRAM_BASE1_PRELIM,
 			   SDRAM_MAX_SIZE);
 
 	udelay (1000);
@@ -227,7 +227,7 @@ phys_size_t initdram (int board_type)
 	/*
 	 * try 9 column mode
 	 */
-	size9 = dram_size (CFG_MAMR_9COL, (long *) SDRAM_BASE1_PRELIM,
+	size9 = dram_size (CONFIG_SYS_MAMR_9COL, (long *) SDRAM_BASE1_PRELIM,
 			   SDRAM_MAX_SIZE);
 
 	if (size8 < size9) {	/* leave configuration at 9 columns     */
@@ -235,7 +235,7 @@ phys_size_t initdram (int board_type)
 /*	debug ("SDRAM Bank 0 in 9 column mode: %ld MB\n", size >> 20);	*/
 	} else {		/* back to 8 columns                    */
 		size_b0 = size8;
-		memctl->memc_mamr = CFG_MAMR_8COL;
+		memctl->memc_mamr = CONFIG_SYS_MAMR_8COL;
 		udelay (500);
 /*	debug ("SDRAM Bank 0 in 8 column mode: %ld MB\n", size >> 20);	*/
 	}
@@ -258,7 +258,7 @@ phys_size_t initdram (int board_type)
 	 */
 	if ((size_b0 < 0x02000000) && (size_b1 < 0x02000000)) {
 		/* reduce to 15.6 us (62.4 us / quad) */
-		memctl->memc_mptpr = CFG_MPTPR_2BK_4K;
+		memctl->memc_mptpr = CONFIG_SYS_MPTPR_2BK_4K;
 		udelay (1000);
 	}
 
@@ -268,9 +268,9 @@ phys_size_t initdram (int board_type)
 	if (size_b1 > size_b0) {	/* SDRAM Bank 1 is bigger - map first   */
 
 		memctl->memc_or2 =
-			((-size_b1) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
+			((-size_b1) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM;
 		memctl->memc_br2 =
-			(CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
+			(CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
 
 		if (size_b0 > 0) {
 			/*
@@ -278,9 +278,9 @@ phys_size_t initdram (int board_type)
 			 */
 			memctl->memc_or1 =
 				((-size_b0) & 0xFFFF0000) |
-				CFG_OR_TIMING_SDRAM;
+				CONFIG_SYS_OR_TIMING_SDRAM;
 			memctl->memc_br1 =
-				((CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA |
+				((CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA |
 				 BR_V)
 				+ size_b1;
 		} else {
@@ -295,16 +295,16 @@ phys_size_t initdram (int board_type)
 
 			/* adjust refresh rate depending on SDRAM type, one bank */
 			reg = memctl->memc_mptpr;
-			reg >>= 1;	/* reduce to CFG_MPTPR_1BK_8K / _4K */
+			reg >>= 1;	/* reduce to CONFIG_SYS_MPTPR_1BK_8K / _4K */
 			memctl->memc_mptpr = reg;
 		}
 
 	} else {		/* SDRAM Bank 0 is bigger - map first   */
 
 		memctl->memc_or1 =
-			((-size_b0) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
+			((-size_b0) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM;
 		memctl->memc_br1 =
-			(CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
+			(CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
 
 		if (size_b1 > 0) {
 			/*
@@ -312,9 +312,9 @@ phys_size_t initdram (int board_type)
 			 */
 			memctl->memc_or2 =
 				((-size_b1) & 0xFFFF0000) |
-				CFG_OR_TIMING_SDRAM;
+				CONFIG_SYS_OR_TIMING_SDRAM;
 			memctl->memc_br2 =
-				((CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA |
+				((CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA |
 				 BR_V)
 				+ size_b0;
 		} else {
@@ -329,7 +329,7 @@ phys_size_t initdram (int board_type)
 
 			/* adjust refresh rate depending on SDRAM type, one bank */
 			reg = memctl->memc_mptpr;
-			reg >>= 1;	/* reduce to CFG_MPTPR_1BK_8K / _4K */
+			reg >>= 1;	/* reduce to CONFIG_SYS_MPTPR_1BK_8K / _4K */
 			memctl->memc_mptpr = reg;
 		}
 	}
@@ -352,7 +352,7 @@ phys_size_t initdram (int board_type)
 static long int dram_size (long int mamr_value, long int *base,
 			   long int maxsize)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 
 	memctl->memc_mamr = mamr_value;
@@ -387,7 +387,7 @@ void load_sernum_ethaddr (void)
 	bd_t *bd = gd->bd;
 
 	for (i = 0; i < 8; i++) {
-		bd->bi_sernum[i] = *(u_char *) (CFG_FLASH_SN_BASE + i);
+		bd->bi_sernum[i] = *(u_char *) (CONFIG_SYS_FLASH_SN_BASE + i);
 	}
 	bd->bi_enetaddr[0] = 0x10;
 	bd->bi_enetaddr[1] = 0x20;