diff options
Diffstat (limited to 'arch/arm/plat-nomadik/include/plat')
| -rw-r--r-- | arch/arm/plat-nomadik/include/plat/gpio-nomadik.h | 102 | ||||
| -rw-r--r-- | arch/arm/plat-nomadik/include/plat/mtu.h | 9 | ||||
| -rw-r--r-- | arch/arm/plat-nomadik/include/plat/pincfg.h | 173 | ||||
| -rw-r--r-- | arch/arm/plat-nomadik/include/plat/ste_dma40.h | 223 |
4 files changed, 0 insertions, 507 deletions
diff --git a/arch/arm/plat-nomadik/include/plat/gpio-nomadik.h b/arch/arm/plat-nomadik/include/plat/gpio-nomadik.h deleted file mode 100644 index c08a54d9d889..000000000000 --- a/arch/arm/plat-nomadik/include/plat/gpio-nomadik.h +++ /dev/null @@ -1,102 +0,0 @@ -/* - * Structures and registers for GPIO access in the Nomadik SoC - * - * Copyright (C) 2008 STMicroelectronics - * Author: Prafulla WADASKAR <prafulla.wadaskar@st.com> - * Copyright (C) 2009 Alessandro Rubini <rubini@unipv.it> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __PLAT_NOMADIK_GPIO -#define __PLAT_NOMADIK_GPIO - -/* - * "nmk_gpio" and "NMK_GPIO" stand for "Nomadik GPIO", leaving - * the "gpio" namespace for generic and cross-machine functions - */ - -/* Register in the logic block */ -#define NMK_GPIO_DAT 0x00 -#define NMK_GPIO_DATS 0x04 -#define NMK_GPIO_DATC 0x08 -#define NMK_GPIO_PDIS 0x0c -#define NMK_GPIO_DIR 0x10 -#define NMK_GPIO_DIRS 0x14 -#define NMK_GPIO_DIRC 0x18 -#define NMK_GPIO_SLPC 0x1c -#define NMK_GPIO_AFSLA 0x20 -#define NMK_GPIO_AFSLB 0x24 -#define NMK_GPIO_LOWEMI 0x28 - -#define NMK_GPIO_RIMSC 0x40 -#define NMK_GPIO_FIMSC 0x44 -#define NMK_GPIO_IS 0x48 -#define NMK_GPIO_IC 0x4c -#define NMK_GPIO_RWIMSC 0x50 -#define NMK_GPIO_FWIMSC 0x54 -#define NMK_GPIO_WKS 0x58 - -/* Alternate functions: function C is set in hw by setting both A and B */ -#define NMK_GPIO_ALT_GPIO 0 -#define NMK_GPIO_ALT_A 1 -#define NMK_GPIO_ALT_B 2 -#define NMK_GPIO_ALT_C (NMK_GPIO_ALT_A | NMK_GPIO_ALT_B) - -#define NMK_GPIO_ALT_CX_SHIFT 2 -#define NMK_GPIO_ALT_C1 ((1<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C) -#define NMK_GPIO_ALT_C2 ((2<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C) -#define NMK_GPIO_ALT_C3 ((3<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C) -#define NMK_GPIO_ALT_C4 ((4<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C) - -/* Pull up/down values */ -enum nmk_gpio_pull { - NMK_GPIO_PULL_NONE, - NMK_GPIO_PULL_UP, - NMK_GPIO_PULL_DOWN, -}; - -/* Sleep mode */ -enum nmk_gpio_slpm { - NMK_GPIO_SLPM_INPUT, - NMK_GPIO_SLPM_WAKEUP_ENABLE = NMK_GPIO_SLPM_INPUT, - NMK_GPIO_SLPM_NOCHANGE, - NMK_GPIO_SLPM_WAKEUP_DISABLE = NMK_GPIO_SLPM_NOCHANGE, -}; - -extern int nmk_gpio_set_slpm(int gpio, enum nmk_gpio_slpm mode); -extern int nmk_gpio_set_pull(int gpio, enum nmk_gpio_pull pull); -#ifdef CONFIG_PINCTRL_NOMADIK -extern int nmk_gpio_set_mode(int gpio, int gpio_mode); -#else -static inline int nmk_gpio_set_mode(int gpio, int gpio_mode) -{ - return -ENODEV; -} -#endif -extern int nmk_gpio_get_mode(int gpio); - -extern void nmk_gpio_wakeups_suspend(void); -extern void nmk_gpio_wakeups_resume(void); - -extern void nmk_gpio_clocks_enable(void); -extern void nmk_gpio_clocks_disable(void); - -extern void nmk_gpio_read_pull(int gpio_bank, u32 *pull_up); - -/* - * Platform data to register a block: only the initial gpio/irq number. - */ -struct nmk_gpio_platform_data { - char *name; - int first_gpio; - int first_irq; - int num_gpio; - u32 (*get_secondary_status)(unsigned int bank); - void (*set_ioforce)(bool enable); - bool supports_sleepmode; -}; - -#endif /* __PLAT_NOMADIK_GPIO */ diff --git a/arch/arm/plat-nomadik/include/plat/mtu.h b/arch/arm/plat-nomadik/include/plat/mtu.h deleted file mode 100644 index 582641f3dc01..000000000000 --- a/arch/arm/plat-nomadik/include/plat/mtu.h +++ /dev/null @@ -1,9 +0,0 @@ -#ifndef __PLAT_MTU_H -#define __PLAT_MTU_H - -void nmdk_timer_init(void __iomem *base); -void nmdk_clkevt_reset(void); -void nmdk_clksrc_reset(void); - -#endif /* __PLAT_MTU_H */ - diff --git a/arch/arm/plat-nomadik/include/plat/pincfg.h b/arch/arm/plat-nomadik/include/plat/pincfg.h deleted file mode 100644 index 3b8ec60af351..000000000000 --- a/arch/arm/plat-nomadik/include/plat/pincfg.h +++ /dev/null @@ -1,173 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * License terms: GNU General Public License, version 2 - * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson - * - * Based on arch/arm/mach-pxa/include/mach/mfp.h: - * Copyright (C) 2007 Marvell International Ltd. - * eric miao <eric.miao@marvell.com> - */ - -#ifndef __PLAT_PINCFG_H -#define __PLAT_PINCFG_H - -/* - * pin configurations are represented by 32-bit integers: - * - * bit 0.. 8 - Pin Number (512 Pins Maximum) - * bit 9..10 - Alternate Function Selection - * bit 11..12 - Pull up/down state - * bit 13 - Sleep mode behaviour - * bit 14 - Direction - * bit 15 - Value (if output) - * bit 16..18 - SLPM pull up/down state - * bit 19..20 - SLPM direction - * bit 21..22 - SLPM Value (if output) - * bit 23..25 - PDIS value (if input) - * bit 26 - Gpio mode - * bit 27 - Sleep mode - * - * to facilitate the definition, the following macros are provided - * - * PIN_CFG_DEFAULT - default config (0): - * pull up/down = disabled - * sleep mode = input/wakeup - * direction = input - * value = low - * SLPM direction = same as normal - * SLPM pull = same as normal - * SLPM value = same as normal - * - * PIN_CFG - default config with alternate function - */ - -typedef unsigned long pin_cfg_t; - -#define PIN_NUM_MASK 0x1ff -#define PIN_NUM(x) ((x) & PIN_NUM_MASK) - -#define PIN_ALT_SHIFT 9 -#define PIN_ALT_MASK (0x3 << PIN_ALT_SHIFT) -#define PIN_ALT(x) (((x) & PIN_ALT_MASK) >> PIN_ALT_SHIFT) -#define PIN_GPIO (NMK_GPIO_ALT_GPIO << PIN_ALT_SHIFT) -#define PIN_ALT_A (NMK_GPIO_ALT_A << PIN_ALT_SHIFT) -#define PIN_ALT_B (NMK_GPIO_ALT_B << PIN_ALT_SHIFT) -#define PIN_ALT_C (NMK_GPIO_ALT_C << PIN_ALT_SHIFT) - -#define PIN_PULL_SHIFT 11 -#define PIN_PULL_MASK (0x3 << PIN_PULL_SHIFT) -#define PIN_PULL(x) (((x) & PIN_PULL_MASK) >> PIN_PULL_SHIFT) -#define PIN_PULL_NONE (NMK_GPIO_PULL_NONE << PIN_PULL_SHIFT) -#define PIN_PULL_UP (NMK_GPIO_PULL_UP << PIN_PULL_SHIFT) -#define PIN_PULL_DOWN (NMK_GPIO_PULL_DOWN << PIN_PULL_SHIFT) - -#define PIN_SLPM_SHIFT 13 -#define PIN_SLPM_MASK (0x1 << PIN_SLPM_SHIFT) -#define PIN_SLPM(x) (((x) & PIN_SLPM_MASK) >> PIN_SLPM_SHIFT) -#define PIN_SLPM_MAKE_INPUT (NMK_GPIO_SLPM_INPUT << PIN_SLPM_SHIFT) -#define PIN_SLPM_NOCHANGE (NMK_GPIO_SLPM_NOCHANGE << PIN_SLPM_SHIFT) -/* These two replace the above in DB8500v2+ */ -#define PIN_SLPM_WAKEUP_ENABLE (NMK_GPIO_SLPM_WAKEUP_ENABLE << PIN_SLPM_SHIFT) -#define PIN_SLPM_WAKEUP_DISABLE (NMK_GPIO_SLPM_WAKEUP_DISABLE << PIN_SLPM_SHIFT) -#define PIN_SLPM_USE_MUX_SETTINGS_IN_SLEEP PIN_SLPM_WAKEUP_DISABLE - -#define PIN_SLPM_GPIO PIN_SLPM_WAKEUP_ENABLE /* In SLPM, pin is a gpio */ -#define PIN_SLPM_ALTFUNC PIN_SLPM_WAKEUP_DISABLE /* In SLPM, pin is altfunc */ - -#define PIN_DIR_SHIFT 14 -#define PIN_DIR_MASK (0x1 << PIN_DIR_SHIFT) -#define PIN_DIR(x) (((x) & PIN_DIR_MASK) >> PIN_DIR_SHIFT) -#define PIN_DIR_INPUT (0 << PIN_DIR_SHIFT) -#define PIN_DIR_OUTPUT (1 << PIN_DIR_SHIFT) - -#define PIN_VAL_SHIFT 15 -#define PIN_VAL_MASK (0x1 << PIN_VAL_SHIFT) -#define PIN_VAL(x) (((x) & PIN_VAL_MASK) >> PIN_VAL_SHIFT) -#define PIN_VAL_LOW (0 << PIN_VAL_SHIFT) -#define PIN_VAL_HIGH (1 << PIN_VAL_SHIFT) - -#define PIN_SLPM_PULL_SHIFT 16 -#define PIN_SLPM_PULL_MASK (0x7 << PIN_SLPM_PULL_SHIFT) -#define PIN_SLPM_PULL(x) \ - (((x) & PIN_SLPM_PULL_MASK) >> PIN_SLPM_PULL_SHIFT) -#define PIN_SLPM_PULL_NONE \ - ((1 + NMK_GPIO_PULL_NONE) << PIN_SLPM_PULL_SHIFT) -#define PIN_SLPM_PULL_UP \ - ((1 + NMK_GPIO_PULL_UP) << PIN_SLPM_PULL_SHIFT) -#define PIN_SLPM_PULL_DOWN \ - ((1 + NMK_GPIO_PULL_DOWN) << PIN_SLPM_PULL_SHIFT) - -#define PIN_SLPM_DIR_SHIFT 19 -#define PIN_SLPM_DIR_MASK (0x3 << PIN_SLPM_DIR_SHIFT) -#define PIN_SLPM_DIR(x) \ - (((x) & PIN_SLPM_DIR_MASK) >> PIN_SLPM_DIR_SHIFT) -#define PIN_SLPM_DIR_INPUT ((1 + 0) << PIN_SLPM_DIR_SHIFT) -#define PIN_SLPM_DIR_OUTPUT ((1 + 1) << PIN_SLPM_DIR_SHIFT) - -#define PIN_SLPM_VAL_SHIFT 21 -#define PIN_SLPM_VAL_MASK (0x3 << PIN_SLPM_VAL_SHIFT) -#define PIN_SLPM_VAL(x) \ - (((x) & PIN_SLPM_VAL_MASK) >> PIN_SLPM_VAL_SHIFT) -#define PIN_SLPM_VAL_LOW ((1 + 0) << PIN_SLPM_VAL_SHIFT) -#define PIN_SLPM_VAL_HIGH ((1 + 1) << PIN_SLPM_VAL_SHIFT) - -#define PIN_SLPM_PDIS_SHIFT 23 -#define PIN_SLPM_PDIS_MASK (0x3 << PIN_SLPM_PDIS_SHIFT) -#define PIN_SLPM_PDIS(x) \ - (((x) & PIN_SLPM_PDIS_MASK) >> PIN_SLPM_PDIS_SHIFT) -#define PIN_SLPM_PDIS_NO_CHANGE (0 << PIN_SLPM_PDIS_SHIFT) -#define PIN_SLPM_PDIS_DISABLED (1 << PIN_SLPM_PDIS_SHIFT) -#define PIN_SLPM_PDIS_ENABLED (2 << PIN_SLPM_PDIS_SHIFT) - -#define PIN_LOWEMI_SHIFT 25 -#define PIN_LOWEMI_MASK (0x1 << PIN_LOWEMI_SHIFT) -#define PIN_LOWEMI(x) (((x) & PIN_LOWEMI_MASK) >> PIN_LOWEMI_SHIFT) -#define PIN_LOWEMI_DISABLED (0 << PIN_LOWEMI_SHIFT) -#define PIN_LOWEMI_ENABLED (1 << PIN_LOWEMI_SHIFT) - -#define PIN_GPIOMODE_SHIFT 26 -#define PIN_GPIOMODE_MASK (0x1 << PIN_GPIOMODE_SHIFT) -#define PIN_GPIOMODE(x) (((x) & PIN_GPIOMODE_MASK) >> PIN_GPIOMODE_SHIFT) -#define PIN_GPIOMODE_DISABLED (0 << PIN_GPIOMODE_SHIFT) -#define PIN_GPIOMODE_ENABLED (1 << PIN_GPIOMODE_SHIFT) - -#define PIN_SLEEPMODE_SHIFT 27 -#define PIN_SLEEPMODE_MASK (0x1 << PIN_SLEEPMODE_SHIFT) -#define PIN_SLEEPMODE(x) (((x) & PIN_SLEEPMODE_MASK) >> PIN_SLEEPMODE_SHIFT) -#define PIN_SLEEPMODE_DISABLED (0 << PIN_SLEEPMODE_SHIFT) -#define PIN_SLEEPMODE_ENABLED (1 << PIN_SLEEPMODE_SHIFT) - - -/* Shortcuts. Use these instead of separate DIR, PULL, and VAL. */ -#define PIN_INPUT_PULLDOWN (PIN_DIR_INPUT | PIN_PULL_DOWN) -#define PIN_INPUT_PULLUP (PIN_DIR_INPUT | PIN_PULL_UP) -#define PIN_INPUT_NOPULL (PIN_DIR_INPUT | PIN_PULL_NONE) -#define PIN_OUTPUT_LOW (PIN_DIR_OUTPUT | PIN_VAL_LOW) -#define PIN_OUTPUT_HIGH (PIN_DIR_OUTPUT | PIN_VAL_HIGH) - -#define PIN_SLPM_INPUT_PULLDOWN (PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_DOWN) -#define PIN_SLPM_INPUT_PULLUP (PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_UP) -#define PIN_SLPM_INPUT_NOPULL (PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_NONE) -#define PIN_SLPM_OUTPUT_LOW (PIN_SLPM_DIR_OUTPUT | PIN_SLPM_VAL_LOW) -#define PIN_SLPM_OUTPUT_HIGH (PIN_SLPM_DIR_OUTPUT | PIN_SLPM_VAL_HIGH) - -#define PIN_CFG_DEFAULT (0) - -#define PIN_CFG(num, alt) \ - (PIN_CFG_DEFAULT |\ - (PIN_NUM(num) | PIN_##alt)) - -#define PIN_CFG_INPUT(num, alt, pull) \ - (PIN_CFG_DEFAULT |\ - (PIN_NUM(num) | PIN_##alt | PIN_INPUT_##pull)) - -#define PIN_CFG_OUTPUT(num, alt, val) \ - (PIN_CFG_DEFAULT |\ - (PIN_NUM(num) | PIN_##alt | PIN_OUTPUT_##val)) - -extern int nmk_config_pin(pin_cfg_t cfg, bool sleep); -extern int nmk_config_pins(pin_cfg_t *cfgs, int num); -extern int nmk_config_pins_sleep(pin_cfg_t *cfgs, int num); - -#endif diff --git a/arch/arm/plat-nomadik/include/plat/ste_dma40.h b/arch/arm/plat-nomadik/include/plat/ste_dma40.h deleted file mode 100644 index 9ff93b065686..000000000000 --- a/arch/arm/plat-nomadik/include/plat/ste_dma40.h +++ /dev/null @@ -1,223 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2007-2010 - * Author: Per Forlin <per.forlin@stericsson.com> for ST-Ericsson - * Author: Jonas Aaberg <jonas.aberg@stericsson.com> for ST-Ericsson - * License terms: GNU General Public License (GPL) version 2 - */ - - -#ifndef STE_DMA40_H -#define STE_DMA40_H - -#include <linux/dmaengine.h> -#include <linux/scatterlist.h> -#include <linux/workqueue.h> -#include <linux/interrupt.h> - -/* - * Maxium size for a single dma descriptor - * Size is limited to 16 bits. - * Size is in the units of addr-widths (1,2,4,8 bytes) - * Larger transfers will be split up to multiple linked desc - */ -#define STEDMA40_MAX_SEG_SIZE 0xFFFF - -/* dev types for memcpy */ -#define STEDMA40_DEV_DST_MEMORY (-1) -#define STEDMA40_DEV_SRC_MEMORY (-1) - -enum stedma40_mode { - STEDMA40_MODE_LOGICAL = 0, - STEDMA40_MODE_PHYSICAL, - STEDMA40_MODE_OPERATION, -}; - -enum stedma40_mode_opt { - STEDMA40_PCHAN_BASIC_MODE = 0, - STEDMA40_LCHAN_SRC_LOG_DST_LOG = 0, - STEDMA40_PCHAN_MODULO_MODE, - STEDMA40_PCHAN_DOUBLE_DST_MODE, - STEDMA40_LCHAN_SRC_PHY_DST_LOG, - STEDMA40_LCHAN_SRC_LOG_DST_PHY, -}; - -#define STEDMA40_ESIZE_8_BIT 0x0 -#define STEDMA40_ESIZE_16_BIT 0x1 -#define STEDMA40_ESIZE_32_BIT 0x2 -#define STEDMA40_ESIZE_64_BIT 0x3 - -/* The value 4 indicates that PEN-reg shall be set to 0 */ -#define STEDMA40_PSIZE_PHY_1 0x4 -#define STEDMA40_PSIZE_PHY_2 0x0 -#define STEDMA40_PSIZE_PHY_4 0x1 -#define STEDMA40_PSIZE_PHY_8 0x2 -#define STEDMA40_PSIZE_PHY_16 0x3 - -/* - * The number of elements differ in logical and - * physical mode - */ -#define STEDMA40_PSIZE_LOG_1 STEDMA40_PSIZE_PHY_2 -#define STEDMA40_PSIZE_LOG_4 STEDMA40_PSIZE_PHY_4 -#define STEDMA40_PSIZE_LOG_8 STEDMA40_PSIZE_PHY_8 -#define STEDMA40_PSIZE_LOG_16 STEDMA40_PSIZE_PHY_16 - -/* Maximum number of possible physical channels */ -#define STEDMA40_MAX_PHYS 32 - -enum stedma40_flow_ctrl { - STEDMA40_NO_FLOW_CTRL, - STEDMA40_FLOW_CTRL, -}; - -enum stedma40_periph_data_width { - STEDMA40_BYTE_WIDTH = STEDMA40_ESIZE_8_BIT, - STEDMA40_HALFWORD_WIDTH = STEDMA40_ESIZE_16_BIT, - STEDMA40_WORD_WIDTH = STEDMA40_ESIZE_32_BIT, - STEDMA40_DOUBLEWORD_WIDTH = STEDMA40_ESIZE_64_BIT -}; - -enum stedma40_xfer_dir { - STEDMA40_MEM_TO_MEM = 1, - STEDMA40_MEM_TO_PERIPH, - STEDMA40_PERIPH_TO_MEM, - STEDMA40_PERIPH_TO_PERIPH -}; - - -/** - * struct stedma40_chan_cfg - dst/src channel configuration - * - * @big_endian: true if the src/dst should be read as big endian - * @data_width: Data width of the src/dst hardware - * @p_size: Burst size - * @flow_ctrl: Flow control on/off. - */ -struct stedma40_half_channel_info { - bool big_endian; - enum stedma40_periph_data_width data_width; - int psize; - enum stedma40_flow_ctrl flow_ctrl; -}; - -/** - * struct stedma40_chan_cfg - Structure to be filled by client drivers. - * - * @dir: MEM 2 MEM, PERIPH 2 MEM , MEM 2 PERIPH, PERIPH 2 PERIPH - * @high_priority: true if high-priority - * @realtime: true if realtime mode is to be enabled. Only available on DMA40 - * version 3+, i.e DB8500v2+ - * @mode: channel mode: physical, logical, or operation - * @mode_opt: options for the chosen channel mode - * @src_dev_type: Src device type - * @dst_dev_type: Dst device type - * @src_info: Parameters for dst half channel - * @dst_info: Parameters for dst half channel - * @use_fixed_channel: if true, use physical channel specified by phy_channel - * @phy_channel: physical channel to use, only if use_fixed_channel is true - * - * This structure has to be filled by the client drivers. - * It is recommended to do all dma configurations for clients in the machine. - * - */ -struct stedma40_chan_cfg { - enum stedma40_xfer_dir dir; - bool high_priority; - bool realtime; - enum stedma40_mode mode; - enum stedma40_mode_opt mode_opt; - int src_dev_type; - int dst_dev_type; - struct stedma40_half_channel_info src_info; - struct stedma40_half_channel_info dst_info; - - bool use_fixed_channel; - int phy_channel; -}; - -/** - * struct stedma40_platform_data - Configuration struct for the dma device. - * - * @dev_len: length of dev_tx and dev_rx - * @dev_tx: mapping between destination event line and io address - * @dev_rx: mapping between source event line and io address - * @memcpy: list of memcpy event lines - * @memcpy_len: length of memcpy - * @memcpy_conf_phy: default configuration of physical channel memcpy - * @memcpy_conf_log: default configuration of logical channel memcpy - * @disabled_channels: A vector, ending with -1, that marks physical channels - * that are for different reasons not available for the driver. - */ -struct stedma40_platform_data { - u32 dev_len; - const dma_addr_t *dev_tx; - const dma_addr_t *dev_rx; - int *memcpy; - u32 memcpy_len; - struct stedma40_chan_cfg *memcpy_conf_phy; - struct stedma40_chan_cfg *memcpy_conf_log; - int disabled_channels[STEDMA40_MAX_PHYS]; - bool use_esram_lcla; -}; - -#ifdef CONFIG_STE_DMA40 - -/** - * stedma40_filter() - Provides stedma40_chan_cfg to the - * ste_dma40 dma driver via the dmaengine framework. - * does some checking of what's provided. - * - * Never directly called by client. It used by dmaengine. - * @chan: dmaengine handle. - * @data: Must be of type: struct stedma40_chan_cfg and is - * the configuration of the framework. - * - * - */ - -bool stedma40_filter(struct dma_chan *chan, void *data); - -/** - * stedma40_slave_mem() - Transfers a raw data buffer to or from a slave - * (=device) - * - * @chan: dmaengine handle - * @addr: source or destination physicall address. - * @size: bytes to transfer - * @direction: direction of transfer - * @flags: is actually enum dma_ctrl_flags. See dmaengine.h - */ - -static inline struct -dma_async_tx_descriptor *stedma40_slave_mem(struct dma_chan *chan, - dma_addr_t addr, - unsigned int size, - enum dma_transfer_direction direction, - unsigned long flags) -{ - struct scatterlist sg; - sg_init_table(&sg, 1); - sg.dma_address = addr; - sg.length = size; - - return dmaengine_prep_slave_sg(chan, &sg, 1, direction, flags); -} - -#else -static inline bool stedma40_filter(struct dma_chan *chan, void *data) -{ - return false; -} - -static inline struct -dma_async_tx_descriptor *stedma40_slave_mem(struct dma_chan *chan, - dma_addr_t addr, - unsigned int size, - enum dma_transfer_direction direction, - unsigned long flags) -{ - return NULL; -} -#endif - -#endif |
