4 files changed, 0 insertions, 507 deletions
diff --git a/arch/arm/plat-nomadik/include/plat/gpio-nomadik.h b/arch/arm/plat-nomadik/include/plat/gpio-nomadik.h
deleted file mode 100644
index c08a54d9d889..000000000000
--- a/arch/arm/plat-nomadik/include/plat/gpio-nomadik.h
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- * Structures and registers for GPIO access in the Nomadik SoC
- *
- * Copyright (C) 2008 STMicroelectronics
- *     Author: Prafulla WADASKAR <prafulla.wadaskar@st.com>
- * Copyright (C) 2009 Alessandro Rubini <rubini@unipv.it>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __PLAT_NOMADIK_GPIO
-#define __PLAT_NOMADIK_GPIO
-
-/*
- * "nmk_gpio" and "NMK_GPIO" stand for "Nomadik GPIO", leaving
- * the "gpio" namespace for generic and cross-machine functions
- */
-
-/* Register in the logic block */
-#define NMK_GPIO_DAT	0x00
-#define NMK_GPIO_DATS	0x04
-#define NMK_GPIO_DATC	0x08
-#define NMK_GPIO_PDIS	0x0c
-#define NMK_GPIO_DIR	0x10
-#define NMK_GPIO_DIRS	0x14
-#define NMK_GPIO_DIRC	0x18
-#define NMK_GPIO_SLPC	0x1c
-#define NMK_GPIO_AFSLA	0x20
-#define NMK_GPIO_AFSLB	0x24
-#define NMK_GPIO_LOWEMI	0x28
-
-#define NMK_GPIO_RIMSC	0x40
-#define NMK_GPIO_FIMSC	0x44
-#define NMK_GPIO_IS	0x48
-#define NMK_GPIO_IC	0x4c
-#define NMK_GPIO_RWIMSC	0x50
-#define NMK_GPIO_FWIMSC	0x54
-#define NMK_GPIO_WKS	0x58
-
-/* Alternate functions: function C is set in hw by setting both A and B */
-#define NMK_GPIO_ALT_GPIO	0
-#define NMK_GPIO_ALT_A	1
-#define NMK_GPIO_ALT_B	2
-#define NMK_GPIO_ALT_C	(NMK_GPIO_ALT_A | NMK_GPIO_ALT_B)
-
-#define NMK_GPIO_ALT_CX_SHIFT 2
-#define NMK_GPIO_ALT_C1	((1<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C)
-#define NMK_GPIO_ALT_C2	((2<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C)
-#define NMK_GPIO_ALT_C3	((3<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C)
-#define NMK_GPIO_ALT_C4	((4<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C)
-
-/* Pull up/down values */
-enum nmk_gpio_pull {
-	NMK_GPIO_PULL_NONE,
-	NMK_GPIO_PULL_UP,
-	NMK_GPIO_PULL_DOWN,
-};
-
-/* Sleep mode */
-enum nmk_gpio_slpm {
-	NMK_GPIO_SLPM_INPUT,
-	NMK_GPIO_SLPM_WAKEUP_ENABLE = NMK_GPIO_SLPM_INPUT,
-	NMK_GPIO_SLPM_NOCHANGE,
-	NMK_GPIO_SLPM_WAKEUP_DISABLE = NMK_GPIO_SLPM_NOCHANGE,
-};
-
-extern int nmk_gpio_set_slpm(int gpio, enum nmk_gpio_slpm mode);
-extern int nmk_gpio_set_pull(int gpio, enum nmk_gpio_pull pull);
-#ifdef CONFIG_PINCTRL_NOMADIK
-extern int nmk_gpio_set_mode(int gpio, int gpio_mode);
-#else
-static inline int nmk_gpio_set_mode(int gpio, int gpio_mode)
-{
-	return -ENODEV;
-}
-#endif
-extern int nmk_gpio_get_mode(int gpio);
-
-extern void nmk_gpio_wakeups_suspend(void);
-extern void nmk_gpio_wakeups_resume(void);
-
-extern void nmk_gpio_clocks_enable(void);
-extern void nmk_gpio_clocks_disable(void);
-
-extern void nmk_gpio_read_pull(int gpio_bank, u32 *pull_up);
-
-/*
- * Platform data to register a block: only the initial gpio/irq number.
- */
-struct nmk_gpio_platform_data {
-	char *name;
-	int first_gpio;
-	int first_irq;
-	int num_gpio;
-	u32 (*get_secondary_status)(unsigned int bank);
-	void (*set_ioforce)(bool enable);
-	bool supports_sleepmode;
-};
-
-#endif /* __PLAT_NOMADIK_GPIO */
diff --git a/arch/arm/plat-nomadik/include/plat/mtu.h b/arch/arm/plat-nomadik/include/plat/mtu.h
deleted file mode 100644
index 582641f3dc01..000000000000
--- a/arch/arm/plat-nomadik/include/plat/mtu.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef __PLAT_MTU_H
-#define __PLAT_MTU_H
-
-void nmdk_timer_init(void __iomem *base);
-void nmdk_clkevt_reset(void);
-void nmdk_clksrc_reset(void);
-
-#endif /* __PLAT_MTU_H */
-
diff --git a/arch/arm/plat-nomadik/include/plat/pincfg.h b/arch/arm/plat-nomadik/include/plat/pincfg.h
deleted file mode 100644
index 3b8ec60af351..000000000000
--- a/arch/arm/plat-nomadik/include/plat/pincfg.h
+++ /dev/null
@@ -1,173 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * License terms: GNU General Public License, version 2
- * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
- *
- * Based on arch/arm/mach-pxa/include/mach/mfp.h:
- *   Copyright (C) 2007 Marvell International Ltd.
- *   eric miao <eric.miao@marvell.com>
- */
-
-#ifndef __PLAT_PINCFG_H
-#define __PLAT_PINCFG_H
-
-/*
- * pin configurations are represented by 32-bit integers:
- *
- *	bit  0.. 8 - Pin Number (512 Pins Maximum)
- *	bit  9..10 - Alternate Function Selection
- *	bit 11..12 - Pull up/down state
- *	bit     13 - Sleep mode behaviour
- *	bit     14 - Direction
- *	bit     15 - Value (if output)
- *	bit 16..18 - SLPM pull up/down state
- *	bit 19..20 - SLPM direction
- *	bit 21..22 - SLPM Value (if output)
- *	bit 23..25 - PDIS value (if input)
- *	bit	26 - Gpio mode
- *	bit	27 - Sleep mode
- *
- * to facilitate the definition, the following macros are provided
- *
- * PIN_CFG_DEFAULT - default config (0):
- *		     pull up/down = disabled
- *		     sleep mode = input/wakeup
- *		     direction = input
- *		     value = low
- *		     SLPM direction = same as normal
- *		     SLPM pull = same as normal
- *		     SLPM value = same as normal
- *
- * PIN_CFG	   - default config with alternate function
- */
-
-typedef unsigned long pin_cfg_t;
-
-#define PIN_NUM_MASK		0x1ff
-#define PIN_NUM(x)		((x) & PIN_NUM_MASK)
-
-#define PIN_ALT_SHIFT		9
-#define PIN_ALT_MASK		(0x3 << PIN_ALT_SHIFT)
-#define PIN_ALT(x)		(((x) & PIN_ALT_MASK) >> PIN_ALT_SHIFT)
-#define PIN_GPIO		(NMK_GPIO_ALT_GPIO << PIN_ALT_SHIFT)
-#define PIN_ALT_A		(NMK_GPIO_ALT_A << PIN_ALT_SHIFT)
-#define PIN_ALT_B		(NMK_GPIO_ALT_B << PIN_ALT_SHIFT)
-#define PIN_ALT_C		(NMK_GPIO_ALT_C << PIN_ALT_SHIFT)
-
-#define PIN_PULL_SHIFT		11
-#define PIN_PULL_MASK		(0x3 << PIN_PULL_SHIFT)
-#define PIN_PULL(x)		(((x) & PIN_PULL_MASK) >> PIN_PULL_SHIFT)
-#define PIN_PULL_NONE		(NMK_GPIO_PULL_NONE << PIN_PULL_SHIFT)
-#define PIN_PULL_UP		(NMK_GPIO_PULL_UP << PIN_PULL_SHIFT)
-#define PIN_PULL_DOWN		(NMK_GPIO_PULL_DOWN << PIN_PULL_SHIFT)
-
-#define PIN_SLPM_SHIFT		13
-#define PIN_SLPM_MASK		(0x1 << PIN_SLPM_SHIFT)
-#define PIN_SLPM(x)		(((x) & PIN_SLPM_MASK) >> PIN_SLPM_SHIFT)
-#define PIN_SLPM_MAKE_INPUT	(NMK_GPIO_SLPM_INPUT << PIN_SLPM_SHIFT)
-#define PIN_SLPM_NOCHANGE	(NMK_GPIO_SLPM_NOCHANGE << PIN_SLPM_SHIFT)
-/* These two replace the above in DB8500v2+ */
-#define PIN_SLPM_WAKEUP_ENABLE	(NMK_GPIO_SLPM_WAKEUP_ENABLE << PIN_SLPM_SHIFT)
-#define PIN_SLPM_WAKEUP_DISABLE	(NMK_GPIO_SLPM_WAKEUP_DISABLE << PIN_SLPM_SHIFT)
-#define PIN_SLPM_USE_MUX_SETTINGS_IN_SLEEP PIN_SLPM_WAKEUP_DISABLE
-
-#define PIN_SLPM_GPIO  PIN_SLPM_WAKEUP_ENABLE /* In SLPM, pin is a gpio */
-#define PIN_SLPM_ALTFUNC PIN_SLPM_WAKEUP_DISABLE /* In SLPM, pin is altfunc */
-
-#define PIN_DIR_SHIFT		14
-#define PIN_DIR_MASK		(0x1 << PIN_DIR_SHIFT)
-#define PIN_DIR(x)		(((x) & PIN_DIR_MASK) >> PIN_DIR_SHIFT)
-#define PIN_DIR_INPUT		(0 << PIN_DIR_SHIFT)
-#define PIN_DIR_OUTPUT		(1 << PIN_DIR_SHIFT)
-
-#define PIN_VAL_SHIFT		15
-#define PIN_VAL_MASK		(0x1 << PIN_VAL_SHIFT)
-#define PIN_VAL(x)		(((x) & PIN_VAL_MASK) >> PIN_VAL_SHIFT)
-#define PIN_VAL_LOW		(0 << PIN_VAL_SHIFT)
-#define PIN_VAL_HIGH		(1 << PIN_VAL_SHIFT)
-
-#define PIN_SLPM_PULL_SHIFT	16
-#define PIN_SLPM_PULL_MASK	(0x7 << PIN_SLPM_PULL_SHIFT)
-#define PIN_SLPM_PULL(x)	\
-	(((x) & PIN_SLPM_PULL_MASK) >> PIN_SLPM_PULL_SHIFT)
-#define PIN_SLPM_PULL_NONE	\
-	((1 + NMK_GPIO_PULL_NONE) << PIN_SLPM_PULL_SHIFT)
-#define PIN_SLPM_PULL_UP	\
-	((1 + NMK_GPIO_PULL_UP) << PIN_SLPM_PULL_SHIFT)
-#define PIN_SLPM_PULL_DOWN	\
-	((1 + NMK_GPIO_PULL_DOWN) << PIN_SLPM_PULL_SHIFT)
-
-#define PIN_SLPM_DIR_SHIFT	19
-#define PIN_SLPM_DIR_MASK	(0x3 << PIN_SLPM_DIR_SHIFT)
-#define PIN_SLPM_DIR(x)		\
-	(((x) & PIN_SLPM_DIR_MASK) >> PIN_SLPM_DIR_SHIFT)
-#define PIN_SLPM_DIR_INPUT	((1 + 0) << PIN_SLPM_DIR_SHIFT)
-#define PIN_SLPM_DIR_OUTPUT	((1 + 1) << PIN_SLPM_DIR_SHIFT)
-
-#define PIN_SLPM_VAL_SHIFT	21
-#define PIN_SLPM_VAL_MASK	(0x3 << PIN_SLPM_VAL_SHIFT)
-#define PIN_SLPM_VAL(x)		\
-	(((x) & PIN_SLPM_VAL_MASK) >> PIN_SLPM_VAL_SHIFT)
-#define PIN_SLPM_VAL_LOW	((1 + 0) << PIN_SLPM_VAL_SHIFT)
-#define PIN_SLPM_VAL_HIGH	((1 + 1) << PIN_SLPM_VAL_SHIFT)
-
-#define PIN_SLPM_PDIS_SHIFT		23
-#define PIN_SLPM_PDIS_MASK		(0x3 << PIN_SLPM_PDIS_SHIFT)
-#define PIN_SLPM_PDIS(x)	\
-	(((x) & PIN_SLPM_PDIS_MASK) >> PIN_SLPM_PDIS_SHIFT)
-#define PIN_SLPM_PDIS_NO_CHANGE		(0 << PIN_SLPM_PDIS_SHIFT)
-#define PIN_SLPM_PDIS_DISABLED		(1 << PIN_SLPM_PDIS_SHIFT)
-#define PIN_SLPM_PDIS_ENABLED		(2 << PIN_SLPM_PDIS_SHIFT)
-
-#define PIN_LOWEMI_SHIFT	25
-#define PIN_LOWEMI_MASK		(0x1 << PIN_LOWEMI_SHIFT)
-#define PIN_LOWEMI(x)		(((x) & PIN_LOWEMI_MASK) >> PIN_LOWEMI_SHIFT)
-#define PIN_LOWEMI_DISABLED	(0 << PIN_LOWEMI_SHIFT)
-#define PIN_LOWEMI_ENABLED	(1 << PIN_LOWEMI_SHIFT)
-
-#define PIN_GPIOMODE_SHIFT	26
-#define PIN_GPIOMODE_MASK	(0x1 << PIN_GPIOMODE_SHIFT)
-#define PIN_GPIOMODE(x)		(((x) & PIN_GPIOMODE_MASK) >> PIN_GPIOMODE_SHIFT)
-#define PIN_GPIOMODE_DISABLED	(0 << PIN_GPIOMODE_SHIFT)
-#define PIN_GPIOMODE_ENABLED	(1 << PIN_GPIOMODE_SHIFT)
-
-#define PIN_SLEEPMODE_SHIFT	27
-#define PIN_SLEEPMODE_MASK	(0x1 << PIN_SLEEPMODE_SHIFT)
-#define PIN_SLEEPMODE(x)	(((x) & PIN_SLEEPMODE_MASK) >> PIN_SLEEPMODE_SHIFT)
-#define PIN_SLEEPMODE_DISABLED	(0 << PIN_SLEEPMODE_SHIFT)
-#define PIN_SLEEPMODE_ENABLED	(1 << PIN_SLEEPMODE_SHIFT)
-
-
-/* Shortcuts.  Use these instead of separate DIR, PULL, and VAL.  */
-#define PIN_INPUT_PULLDOWN	(PIN_DIR_INPUT | PIN_PULL_DOWN)
-#define PIN_INPUT_PULLUP	(PIN_DIR_INPUT | PIN_PULL_UP)
-#define PIN_INPUT_NOPULL	(PIN_DIR_INPUT | PIN_PULL_NONE)
-#define PIN_OUTPUT_LOW		(PIN_DIR_OUTPUT | PIN_VAL_LOW)
-#define PIN_OUTPUT_HIGH		(PIN_DIR_OUTPUT | PIN_VAL_HIGH)
-
-#define PIN_SLPM_INPUT_PULLDOWN	(PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_DOWN)
-#define PIN_SLPM_INPUT_PULLUP	(PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_UP)
-#define PIN_SLPM_INPUT_NOPULL	(PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_NONE)
-#define PIN_SLPM_OUTPUT_LOW	(PIN_SLPM_DIR_OUTPUT | PIN_SLPM_VAL_LOW)
-#define PIN_SLPM_OUTPUT_HIGH	(PIN_SLPM_DIR_OUTPUT | PIN_SLPM_VAL_HIGH)
-
-#define PIN_CFG_DEFAULT		(0)
-
-#define PIN_CFG(num, alt)		\
-	(PIN_CFG_DEFAULT |\
-	 (PIN_NUM(num) | PIN_##alt))
-
-#define PIN_CFG_INPUT(num, alt, pull)		\
-	(PIN_CFG_DEFAULT |\
-	 (PIN_NUM(num) | PIN_##alt | PIN_INPUT_##pull))
-
-#define PIN_CFG_OUTPUT(num, alt, val)		\
-	(PIN_CFG_DEFAULT |\
-	 (PIN_NUM(num) | PIN_##alt | PIN_OUTPUT_##val))
-
-extern int nmk_config_pin(pin_cfg_t cfg, bool sleep);
-extern int nmk_config_pins(pin_cfg_t *cfgs, int num);
-extern int nmk_config_pins_sleep(pin_cfg_t *cfgs, int num);
-
-#endif
diff --git a/arch/arm/plat-nomadik/include/plat/ste_dma40.h b/arch/arm/plat-nomadik/include/plat/ste_dma40.h
deleted file mode 100644
index 9ff93b065686..000000000000
--- a/arch/arm/plat-nomadik/include/plat/ste_dma40.h
+++ /dev/null
@@ -1,223 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2007-2010
- * Author: Per Forlin <per.forlin@stericsson.com> for ST-Ericsson
- * Author: Jonas Aaberg <jonas.aberg@stericsson.com> for ST-Ericsson
- * License terms: GNU General Public License (GPL) version 2
- */
-
-
-#ifndef STE_DMA40_H
-#define STE_DMA40_H
-
-#include <linux/dmaengine.h>
-#include <linux/scatterlist.h>
-#include <linux/workqueue.h>
-#include <linux/interrupt.h>
-
-/*
- * Maxium size for a single dma descriptor
- * Size is limited to 16 bits.
- * Size is in the units of addr-widths (1,2,4,8 bytes)
- * Larger transfers will be split up to multiple linked desc
- */
-#define STEDMA40_MAX_SEG_SIZE 0xFFFF
-
-/* dev types for memcpy */
-#define STEDMA40_DEV_DST_MEMORY (-1)
-#define	STEDMA40_DEV_SRC_MEMORY (-1)
-
-enum stedma40_mode {
-	STEDMA40_MODE_LOGICAL = 0,
-	STEDMA40_MODE_PHYSICAL,
-	STEDMA40_MODE_OPERATION,
-};
-
-enum stedma40_mode_opt {
-	STEDMA40_PCHAN_BASIC_MODE = 0,
-	STEDMA40_LCHAN_SRC_LOG_DST_LOG = 0,
-	STEDMA40_PCHAN_MODULO_MODE,
-	STEDMA40_PCHAN_DOUBLE_DST_MODE,
-	STEDMA40_LCHAN_SRC_PHY_DST_LOG,
-	STEDMA40_LCHAN_SRC_LOG_DST_PHY,
-};
-
-#define STEDMA40_ESIZE_8_BIT  0x0
-#define STEDMA40_ESIZE_16_BIT 0x1
-#define STEDMA40_ESIZE_32_BIT 0x2
-#define STEDMA40_ESIZE_64_BIT 0x3
-
-/* The value 4 indicates that PEN-reg shall be set to 0 */
-#define STEDMA40_PSIZE_PHY_1  0x4
-#define STEDMA40_PSIZE_PHY_2  0x0
-#define STEDMA40_PSIZE_PHY_4  0x1
-#define STEDMA40_PSIZE_PHY_8  0x2
-#define STEDMA40_PSIZE_PHY_16 0x3
-
-/*
- * The number of elements differ in logical and
- * physical mode
- */
-#define STEDMA40_PSIZE_LOG_1  STEDMA40_PSIZE_PHY_2
-#define STEDMA40_PSIZE_LOG_4  STEDMA40_PSIZE_PHY_4
-#define STEDMA40_PSIZE_LOG_8  STEDMA40_PSIZE_PHY_8
-#define STEDMA40_PSIZE_LOG_16 STEDMA40_PSIZE_PHY_16
-
-/* Maximum number of possible physical channels */
-#define STEDMA40_MAX_PHYS 32
-
-enum stedma40_flow_ctrl {
-	STEDMA40_NO_FLOW_CTRL,
-	STEDMA40_FLOW_CTRL,
-};
-
-enum stedma40_periph_data_width {
-	STEDMA40_BYTE_WIDTH = STEDMA40_ESIZE_8_BIT,
-	STEDMA40_HALFWORD_WIDTH = STEDMA40_ESIZE_16_BIT,
-	STEDMA40_WORD_WIDTH = STEDMA40_ESIZE_32_BIT,
-	STEDMA40_DOUBLEWORD_WIDTH = STEDMA40_ESIZE_64_BIT
-};
-
-enum stedma40_xfer_dir {
-	STEDMA40_MEM_TO_MEM = 1,
-	STEDMA40_MEM_TO_PERIPH,
-	STEDMA40_PERIPH_TO_MEM,
-	STEDMA40_PERIPH_TO_PERIPH
-};
-
-
-/**
- * struct stedma40_chan_cfg - dst/src channel configuration
- *
- * @big_endian: true if the src/dst should be read as big endian
- * @data_width: Data width of the src/dst hardware
- * @p_size: Burst size
- * @flow_ctrl: Flow control on/off.
- */
-struct stedma40_half_channel_info {
-	bool big_endian;
-	enum stedma40_periph_data_width data_width;
-	int psize;
-	enum stedma40_flow_ctrl flow_ctrl;
-};
-
-/**
- * struct stedma40_chan_cfg - Structure to be filled by client drivers.
- *
- * @dir: MEM 2 MEM, PERIPH 2 MEM , MEM 2 PERIPH, PERIPH 2 PERIPH
- * @high_priority: true if high-priority
- * @realtime: true if realtime mode is to be enabled.  Only available on DMA40
- * version 3+, i.e DB8500v2+
- * @mode: channel mode: physical, logical, or operation
- * @mode_opt: options for the chosen channel mode
- * @src_dev_type: Src device type
- * @dst_dev_type: Dst device type
- * @src_info: Parameters for dst half channel
- * @dst_info: Parameters for dst half channel
- * @use_fixed_channel: if true, use physical channel specified by phy_channel
- * @phy_channel: physical channel to use, only if use_fixed_channel is true
- *
- * This structure has to be filled by the client drivers.
- * It is recommended to do all dma configurations for clients in the machine.
- *
- */
-struct stedma40_chan_cfg {
-	enum stedma40_xfer_dir			 dir;
-	bool					 high_priority;
-	bool					 realtime;
-	enum stedma40_mode			 mode;
-	enum stedma40_mode_opt			 mode_opt;
-	int					 src_dev_type;
-	int					 dst_dev_type;
-	struct stedma40_half_channel_info	 src_info;
-	struct stedma40_half_channel_info	 dst_info;
-
-	bool					 use_fixed_channel;
-	int					 phy_channel;
-};
-
-/**
- * struct stedma40_platform_data - Configuration struct for the dma device.
- *
- * @dev_len: length of dev_tx and dev_rx
- * @dev_tx: mapping between destination event line and io address
- * @dev_rx: mapping between source event line and io address
- * @memcpy: list of memcpy event lines
- * @memcpy_len: length of memcpy
- * @memcpy_conf_phy: default configuration of physical channel memcpy
- * @memcpy_conf_log: default configuration of logical channel memcpy
- * @disabled_channels: A vector, ending with -1, that marks physical channels
- * that are for different reasons not available for the driver.
- */
-struct stedma40_platform_data {
-	u32				 dev_len;
-	const dma_addr_t		*dev_tx;
-	const dma_addr_t		*dev_rx;
-	int				*memcpy;
-	u32				 memcpy_len;
-	struct stedma40_chan_cfg	*memcpy_conf_phy;
-	struct stedma40_chan_cfg	*memcpy_conf_log;
-	int				 disabled_channels[STEDMA40_MAX_PHYS];
-	bool				 use_esram_lcla;
-};
-
-#ifdef CONFIG_STE_DMA40
-
-/**
- * stedma40_filter() - Provides stedma40_chan_cfg to the
- * ste_dma40 dma driver via the dmaengine framework.
- * does some checking of what's provided.
- *
- * Never directly called by client. It used by dmaengine.
- * @chan: dmaengine handle.
- * @data: Must be of type: struct stedma40_chan_cfg and is
- * the configuration of the framework.
- *
- *
- */
-
-bool stedma40_filter(struct dma_chan *chan, void *data);
-
-/**
- * stedma40_slave_mem() - Transfers a raw data buffer to or from a slave
- * (=device)
- *
- * @chan: dmaengine handle
- * @addr: source or destination physicall address.
- * @size: bytes to transfer
- * @direction: direction of transfer
- * @flags: is actually enum dma_ctrl_flags. See dmaengine.h
- */
-
-static inline struct
-dma_async_tx_descriptor *stedma40_slave_mem(struct dma_chan *chan,
-					    dma_addr_t addr,
-					    unsigned int size,
-					    enum dma_transfer_direction direction,
-					    unsigned long flags)
-{
-	struct scatterlist sg;
-	sg_init_table(&sg, 1);
-	sg.dma_address = addr;
-	sg.length = size;
-
-	return dmaengine_prep_slave_sg(chan, &sg, 1, direction, flags);
-}
-
-#else
-static inline bool stedma40_filter(struct dma_chan *chan, void *data)
-{
-	return false;
-}
-
-static inline struct
-dma_async_tx_descriptor *stedma40_slave_mem(struct dma_chan *chan,
-					    dma_addr_t addr,
-					    unsigned int size,
-					    enum dma_transfer_direction direction,
-					    unsigned long flags)
-{
-	return NULL;
-}
-#endif
-
-#endif