diff options
| -rw-r--r-- | Documentation/ABI/testing/sysfs-devices-system-cpu | 11 | ||||
| -rw-r--r-- | Documentation/cpu-freq/boost.txt | 93 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt | 55 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/power/opp.txt | 25 | ||||
| -rw-r--r-- | arch/arm/kernel/smp.c | 54 | ||||
| -rw-r--r-- | arch/x86/include/asm/msr-index.h | 3 | ||||
| -rw-r--r-- | drivers/acpi/processor_perflib.c | 30 | ||||
| -rw-r--r-- | drivers/base/power/opp.c | 47 | ||||
| -rw-r--r-- | drivers/cpufreq/Kconfig | 11 | ||||
| -rw-r--r-- | drivers/cpufreq/Kconfig.x86 | 18 | ||||
| -rw-r--r-- | drivers/cpufreq/Makefile | 4 | ||||
| -rw-r--r-- | drivers/cpufreq/acpi-cpufreq.c | 272 | ||||
| -rw-r--r-- | drivers/cpufreq/cpufreq-cpu0.c | 269 | ||||
| -rw-r--r-- | drivers/cpufreq/cpufreq_conservative.c | 2 | ||||
| -rw-r--r-- | drivers/cpufreq/cpufreq_ondemand.c | 1 | ||||
| -rw-r--r-- | drivers/cpufreq/longhaul.h | 26 | ||||
| -rw-r--r-- | drivers/cpufreq/omap-cpufreq.c | 35 | ||||
| -rw-r--r-- | drivers/cpufreq/powernow-k8.c | 406 | ||||
| -rw-r--r-- | drivers/cpufreq/powernow-k8.h | 32 | ||||
| -rw-r--r-- | include/linux/opp.h | 8 |
20 files changed, 947 insertions, 455 deletions
diff --git a/Documentation/ABI/testing/sysfs-devices-system-cpu b/Documentation/ABI/testing/sysfs-devices-system-cpu index 5dab36448b44..6943133afcb8 100644 --- a/Documentation/ABI/testing/sysfs-devices-system-cpu +++ b/Documentation/ABI/testing/sysfs-devices-system-cpu @@ -176,3 +176,14 @@ Description: Disable L3 cache indices All AMD processors with L3 caches provide this functionality. For details, see BKDGs at http://developer.amd.com/documentation/guides/Pages/default.aspx + + +What: /sys/devices/system/cpu/cpufreq/boost +Date: August 2012 +Contact: Linux kernel mailing list <linux-kernel@vger.kernel.org> +Description: Processor frequency boosting control + + This switch controls the boost setting for the whole system. + Boosting allows the CPU and the firmware to run at a frequency + beyound it's nominal limit. + More details can be found in Documentation/cpu-freq/boost.txt diff --git a/Documentation/cpu-freq/boost.txt b/Documentation/cpu-freq/boost.txt new file mode 100644 index 000000000000..9b4edfcf486f --- /dev/null +++ b/Documentation/cpu-freq/boost.txt @@ -0,0 +1,93 @@ +Processor boosting control + + - information for users - + +Quick guide for the impatient: +-------------------- +/sys/devices/system/cpu/cpufreq/boost +controls the boost setting for the whole system. You can read and write +that file with either "0" (boosting disabled) or "1" (boosting allowed). +Reading or writing 1 does not mean that the system is boosting at this +very moment, but only that the CPU _may_ raise the frequency at it's +discretion. +-------------------- + +Introduction +------------- +Some CPUs support a functionality to raise the operating frequency of +some cores in a multi-core package if certain conditions apply, mostly +if the whole chip is not fully utilized and below it's intended thermal +budget. This is done without operating system control by a combination +of hardware and firmware. +On Intel CPUs this is called "Turbo Boost", AMD calls it "Turbo-Core", +in technical documentation "Core performance boost". In Linux we use +the term "boost" for convenience. + +Rationale for disable switch +---------------------------- + +Though the idea is to just give better performance without any user +intervention, sometimes the need arises to disable this functionality. +Most systems offer a switch in the (BIOS) firmware to disable the +functionality at all, but a more fine-grained and dynamic control would +be desirable: +1. While running benchmarks, reproducible results are important. Since + the boosting functionality depends on the load of the whole package, + single thread performance can vary. By explicitly disabling the boost + functionality at least for the benchmark's run-time the system will run + at a fixed frequency and results are reproducible again. +2. To examine the impact of the boosting functionality it is helpful + to do tests with and without boosting. +3. Boosting means overclocking the processor, though under controlled + conditions. By raising the frequency and the voltage the processor + will consume more power than without the boosting, which may be + undesirable for instance for mobile users. Disabling boosting may + save power here, though this depends on the workload. + + +User controlled switch +---------------------- + +To allow the user to toggle the boosting functionality, the acpi-cpufreq +driver exports a sysfs knob to disable it. There is a file: +/sys/devices/system/cpu/cpufreq/boost +which can either read "0" (boosting disabled) or "1" (boosting enabled). +Reading the file is always supported, even if the processor does not +support boosting. In this case the file will be read-only and always +reads as "0". Explicitly changing the permissions and writing to that +file anyway will return EINVAL. + +On supported CPUs one can write either a "0" or a "1" into this file. +This will either disable the boost functionality on all cores in the +whole system (0) or will allow the hardware to boost at will (1). + +Writing a "1" does not explicitly boost the system, but just allows the +CPU (and the firmware) to boost at their discretion. Some implementations +take external factors like the chip's temperature into account, so +boosting once does not necessarily mean that it will occur every time +even using the exact same software setup. + + +AMD legacy cpb switch +--------------------- +The AMD powernow-k8 driver used to support a very similar switch to +disable or enable the "Core Performance Boost" feature of some AMD CPUs. +This switch was instantiated in each CPU's cpufreq directory +(/sys/devices/system/cpu[0-9]*/cpufreq) and was called "cpb". +Though the per CPU existence hints at a more fine grained control, the +actual implementation only supported a system-global switch semantics, +which was simply reflected into each CPU's file. Writing a 0 or 1 into it +would pull the other CPUs to the same state. +For compatibility reasons this file and its behavior is still supported +on AMD CPUs, though it is now protected by a config switch +(X86_ACPI_CPUFREQ_CPB). On Intel CPUs this file will never be created, +even with the config option set. +This functionality is considered legacy and will be removed in some future +kernel version. + +More fine grained boosting control +---------------------------------- + +Technically it is possible to switch the boosting functionality at least +on a per package basis, for some CPUs even per core. Currently the driver +does not support it, but this may be implemented in the future. diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt new file mode 100644 index 000000000000..4416ccc33472 --- /dev/null +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt @@ -0,0 +1,55 @@ +Generic CPU0 cpufreq driver + +It is a generic cpufreq driver for CPU0 frequency management. It +supports both uniprocessor (UP) and symmetric multiprocessor (SMP) +systems which share clock and voltage across all CPUs. + +Both required and optional properties listed below must be defined +under node /cpus/cpu@0. + +Required properties: +- operating-points: Refer to Documentation/devicetree/bindings/power/opp.txt + for details + +Optional properties: +- clock-latency: Specify the possible maximum transition latency for clock, + in unit of nanoseconds. +- voltage-tolerance: Specify the CPU voltage tolerance in percentage. + +Examples: + +cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-a9"; + reg = <0>; + next-level-cache = <&L2>; + operating-points = < + /* kHz uV */ + 792000 1100000 + 396000 950000 + 198000 850000 + >; + transition-latency = <61036>; /* two CLK32 periods */ + }; + + cpu@1 { + compatible = "arm,cortex-a9"; + reg = <1>; + next-level-cache = <&L2>; + }; + + cpu@2 { + compatible = "arm,cortex-a9"; + reg = <2>; + next-level-cache = <&L2>; + }; + + cpu@3 { + compatible = "arm,cortex-a9"; + reg = <3>; + next-level-cache = <&L2>; + }; +}; diff --git a/Documentation/devicetree/bindings/power/opp.txt b/Documentation/devicetree/bindings/power/opp.txt new file mode 100644 index 000000000000..74499e5033fc --- /dev/null +++ b/Documentation/devicetree/bindings/power/opp.txt @@ -0,0 +1,25 @@ +* Generic OPP Interface + +SoCs have a standard set of tuples consisting of frequency and +voltage pairs that the device will support per voltage domain. These +are called Operating Performance Points or OPPs. + +Properties: +- operating-points: An array of 2-tuples items, and each item consists + of frequency and voltage like <freq-kHz vol-uV>. + freq: clock frequency in kHz + vol: voltage in microvolt + +Examples: + +cpu@0 { + compatible = "arm,cortex-a9"; + reg = <0>; + next-level-cache = <&L2>; + operating-points = < + /* kHz uV */ + 792000 1100000 + 396000 950000 + 198000 850000 + >; +}; diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index ebd8ad274d76..8e03567c9583 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -25,6 +25,7 @@ #include <linux/percpu.h> #include <linux/clockchips.h> #include <linux/completion.h> +#include <linux/cpufreq.h> #include <linux/atomic.h> #include <asm/cacheflush.h> @@ -584,3 +585,56 @@ int setup_profiling_timer(unsigned int multiplier) { return -EINVAL; } + +#ifdef CONFIG_CPU_FREQ + +static DEFINE_PER_CPU(unsigned long, l_p_j_ref); +static DEFINE_PER_CPU(unsigned long, l_p_j_ref_freq); +static unsigned long global_l_p_j_ref; +static unsigned long global_l_p_j_ref_freq; + +static int cpufreq_callback(struct notifier_block *nb, + unsigned long val, void *data) +{ + struct cpufreq_freqs *freq = data; + int cpu = freq->cpu; + + if (freq->flags & CPUFREQ_CONST_LOOPS) + return NOTIFY_OK; + + if (!per_cpu(l_p_j_ref, cpu)) { + per_cpu(l_p_j_ref, cpu) = + per_cpu(cpu_data, cpu).loops_per_jiffy; + per_cpu(l_p_j_ref_freq, cpu) = freq->old; + if (!global_l_p_j_ref) { + global_l_p_j_ref = loops_per_jiffy; + global_l_p_j_ref_freq = freq->old; + } + } + + if ((val == CPUFREQ_PRECHANGE && freq->old < freq->new) || + (val == CPUFREQ_POSTCHANGE && freq->old > freq->new) || + (val == CPUFREQ_RESUMECHANGE || val == CPUFREQ_SUSPENDCHANGE)) { + loops_per_jiffy = cpufreq_scale(global_l_p_j_ref, + global_l_p_j_ref_freq, + freq->new); + per_cpu(cpu_data, cpu).loops_per_jiffy = + cpufreq_scale(per_cpu(l_p_j_ref, cpu), + per_cpu(l_p_j_ref_freq, cpu), + freq->new); + } + return NOTIFY_OK; +} + +static struct notifier_block cpufreq_notifier = { + .notifier_call = cpufreq_callback, +}; + +static int __init register_cpufreq_notifier(void) +{ + return cpufreq_register_notifier(&cpufreq_notifier, + CPUFREQ_TRANSITION_NOTIFIER); +} +core_initcall(register_cpufreq_notifier); + +#endif diff --git a/arch/x86/include/asm/msr-index.h b/arch/x86/include/asm/msr-index.h index 957ec87385af..fbee9714d9ab 100644 --- a/arch/x86/include/asm/msr-index.h +++ b/arch/x86/include/asm/msr-index.h @@ -248,6 +248,9 @@ #define MSR_IA32_PERF_STATUS 0x00000198 #define MSR_IA32_PERF_CTL 0x00000199 +#define MSR_AMD_PSTATE_DEF_BASE 0xc0010064 +#define MSR_AMD_PERF_STATUS 0xc0010063 +#define MSR_AMD_PERF_CTL 0xc0010062 #define MSR_IA32_MPERF 0x000000e7 #define MSR_IA32_APERF 0x000000e8 diff --git a/drivers/acpi/processor_perflib.c b/drivers/acpi/processor_perflib.c index a093dc163a42..836bfe069042 100644 --- a/drivers/acpi/processor_perflib.c +++ b/drivers/acpi/processor_perflib.c @@ -324,6 +324,34 @@ static int acpi_processor_get_performance_control(struct acpi_processor *pr) return result; } +#ifdef CONFIG_X86 +/* + * Some AMDs have 50MHz frequency multiples, but only provide 100MHz rounding + * in their ACPI data. Calculate the real values and fix up the _PSS data. + */ +static void amd_fixup_frequency(struct acpi_processor_px *px, int i) +{ + u32 hi, lo, fid, did; + int index = px->control & 0x00000007; + + if (boot_cpu_data.x86_vendor != X86_VENDOR_AMD) + return; + + if ((boot_cpu_data.x86 == 0x10 && boot_cpu_data.x86_model < 10) + || boot_cpu_data.x86 == 0x11) { + rdmsr(MSR_AMD_PSTATE_DEF_BASE + index, lo, hi); + fid = lo & 0x3f; + did = (lo >> 6) & 7; + if (boot_cpu_data.x86 == 0x10) + px->core_frequency = (100 * (fid + 0x10)) >> did; + else + px->core_frequency = (100 * (fid + 8)) >> did; + } +} +#else +static void amd_fixup_frequency(struct acpi_processor_px *px, int i) {}; +#endif + static int acpi_processor_get_performance_states(struct acpi_processor *pr) { int result = 0; @@ -379,6 +407,8 @@ static int acpi_processor_get_performance_states(struct acpi_processor *pr) goto end; } + amd_fixup_frequency(px, i); + ACPI_DEBUG_PRINT((ACPI_DB_INFO, "State [%d]: core_frequency[%d] power[%d] transition_latency[%d] bus_master_latency[%d] control[0x%x] status[0x%x]\n", i, diff --git a/drivers/base/power/opp.c b/drivers/base/power/opp.c index ac993eafec82..d9468642fc41 100644 --- a/drivers/base/power/opp.c +++ b/drivers/base/power/opp.c @@ -22,6 +22,7 @@ #include <linux/rculist.h> #include <linux/rcupdate.h> #include <linux/opp.h> +#include <linux/of.h> /* * Internal data structure organization with the OPP layer library is as @@ -674,3 +675,49 @@ struct srcu_notifier_head *opp_get_notifier(struct device *dev) return &dev_opp->head; } + +#ifdef CONFIG_OF +/** + * of_init_opp_table() - Initialize opp table from device tree + * @dev: device pointer used to lookup device OPPs. + * + * Register the initial OPP table with the OPP library for given device. + */ +int of_init_opp_table(struct device *dev) +{ + const struct property *prop; + const __be32 *val; + int nr; + + prop = of_find_property(dev->of_node, "operating-points", NULL); + if (!prop) + return -ENODEV; + if (!prop->value) + return -ENODATA; + + /* + * Each OPP is a set of tuples consisting of frequency and + * voltage like <freq-kHz vol-uV>. + */ + nr = prop->length / sizeof(u32); + if (nr % 2) { + dev_err(dev, "%s: Invalid OPP list\n", __func__); + return -EINVAL; + } + + val = prop->value; + while (nr) { + unsigned long freq = be32_to_cpup(val++) * 1000; + unsigned long volt = be32_to_cpup(val++); + + if (opp_add(dev, freq, volt)) { + dev_warn(dev, "%s: Failed to add OPP %ld\n", + __func__, freq); + continue; + } + nr -= 2; + } + + return 0; +} +#endif diff --git a/drivers/cpufreq/Kconfig b/drivers/cpufreq/Kconfig index e24a2a1b6666..ea512f47b789 100644 --- a/drivers/cpufreq/Kconfig +++ b/drivers/cpufreq/Kconfig @@ -179,6 +179,17 @@ config CPU_FREQ_GOV_CONSERVATIVE If in doubt, say N. +config GENERIC_CPUFREQ_CPU0 + bool "Generic CPU0 cpufreq driver" + depends on HAVE_CLK && REGULATOR && PM_OPP && OF + select CPU_FREQ_TABLE + help + This adds a generic cpufreq driver for CPU0 frequency management. + It supports both uniprocessor (UP) and symmetric multiprocessor (SMP) + systems which share clock and voltage across all CPUs. + + If in doubt, say N. + menu "x86 CPU frequency scaling drivers" depends on X86 source "drivers/cpufreq/Kconfig.x86" diff --git a/drivers/cpufreq/Kconfig.x86 b/drivers/cpufreq/Kconfig.x86 index 78ff7ee48951..934854ae5eb4 100644 --- a/drivers/cpufreq/Kconfig.x86 +++ b/drivers/cpufreq/Kconfig.x86 @@ -23,7 +23,8 @@ config X86_ACPI_CPUFREQ help This driver adds a CPUFreq driver which utilizes the ACPI Processor Performance States. - This driver also supports Intel Enhanced Speedstep. + This driver also supports Intel Enhanced Speedstep and newer + AMD CPUs. To compile this driver as a module, choose M here: the module will be called acpi-cpufreq. @@ -32,6 +33,18 @@ config X86_ACPI_CPUFREQ If in doubt, say N. +config X86_ACPI_CPUFREQ_CPB + default y + bool "Legacy cpb sysfs knob support for AMD CPUs" + depends on X86_ACPI_CPUFREQ && CPU_SUP_AMD + help + The powernow-k8 driver used to provide a sysfs knob called "cpb" + to disable the Core Performance Boosting feature of AMD CPUs. This + file has now been superseeded by the more generic "boost" entry. + + By enabling this option the acpi_cpufreq driver provides the old + entry in addition to the new boost ones, for compatibility reasons. + config ELAN_CPUFREQ tristate "AMD Elan SC400 and SC410" select CPU_FREQ_TABLE @@ -95,7 +108,8 @@ config X86_POWERNOW_K8 select CPU_FREQ_TABLE depends on ACPI && ACPI_PROCESSOR help - This adds the CPUFreq driver for K8/K10 Opteron/Athlon64 processors. + This adds the CPUFreq driver for K8/early Opteron/Athlon64 processors. + Support for K10 and newer processors is now in acpi-cpufreq. To compile this driver as a module, choose M here: the module will be called powernow-k8. diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile index 9531fc2eda22..1bc90e1306d8 100644 --- a/drivers/cpufreq/Makefile +++ b/drivers/cpufreq/Makefile @@ -13,13 +13,15 @@ obj-$(CONFIG_CPU_FREQ_GOV_CONSERVATIVE) += cpufreq_conservative.o # CPUfreq cross-arch helpers obj-$(CONFIG_CPU_FREQ_TABLE) += freq_table.o +obj-$(CONFIG_GENERIC_CPUFREQ_CPU0) += cpufreq-cpu0.o + ################################################################################## # x86 drivers. # Link order matters. K8 is preferred to ACPI because of firmware bugs in early # K8 systems. ACPI is preferred to all other hardware-specific drivers. # speedstep-* is preferred over p4-clockmod. -obj-$(CONFIG_X86_POWERNOW_K8) += powernow-k8.o mperf.o +obj-$(CONFIG_X86_POWERNOW_K8) += powernow-k8.o obj-$(CONFIG_X86_ACPI_CPUFREQ) += acpi-cpufreq.o mperf.o obj-$(CONFIG_X86_PCC_CPUFREQ) += pcc-cpufreq.o obj-$(CONFIG_X86_POWERNOW_K6) += powernow-k6.o diff --git a/drivers/cpufreq/acpi-cpufreq.c b/drivers/cpufreq/acpi-cpufreq.c index 56c6c6b4eb4d..0d048f6a2b23 100644 --- a/drivers/cpufreq/acpi-cpufreq.c +++ b/drivers/cpufreq/acpi-cpufreq.c @@ -51,13 +51,19 @@ MODULE_AUTHOR("Paul Diefenbaugh, Dominik Brodowski"); MODULE_DESCRIPTION("ACPI Processor P-States Driver"); MODULE_LICENSE("GPL"); +#define PFX "acpi-cpufreq: " + enum { UNDEFINED_CAPABLE = 0, SYSTEM_INTEL_MSR_CAPABLE, + SYSTEM_AMD_MSR_CAPABLE, SYSTEM_IO_CAPABLE, }; #define INTEL_MSR_RANGE (0xffff) +#define AMD_MSR_RANGE (0x7) + +#define MSR_K7_HWCR_CPB_DIS (1ULL << 25) struct acpi_cpufreq_data { struct acpi_processor_performance *acpi_data; @@ -74,6 +80,116 @@ static struct acpi_processor_performance __percpu *acpi_perf_data; static struct cpufreq_driver acpi_cpufreq_driver; static unsigned int acpi_pstate_strict; +static bool boost_enabled, boost_supported; +static struct msr __percpu *msrs; + +static bool boost_state(unsigned int cpu) +{ + u32 lo, hi; + u64 msr; + + switch (boot_cpu_data.x86_vendor) { + case X86_VENDOR_INTEL: + rdmsr_on_cpu(cpu, MSR_IA32_MISC_ENABLE, &lo, &hi); + msr = lo | ((u64)hi << 32); + return !(msr & MSR_IA32_MISC_ENABLE_TURBO_DISABLE); + case X86_VENDOR_AMD: + rdmsr_on_cpu(cpu, MSR_K7_HWCR, &lo, &hi); + msr = lo | ((u64)hi << 32); + return !(msr & MSR_K7_HWCR_CPB_DIS); + } + return false; +} + +static void boost_set_msrs(bool enable, const struct cpumask *cpumask) +{ + u32 cpu; + u32 msr_addr; + u64 msr_mask; + + switch (boot_cpu_data.x86_vendor) { + case X86_VENDOR_INTEL: + msr_addr = MSR_IA32_MISC_ENABLE; + msr_mask = MSR_IA32_MISC_ENABLE_TURBO_DISABLE; + break; + case X86_VENDOR_AMD: + msr_addr = MSR_K7_HWCR; + msr_mask = MSR_K7_HWCR_CPB_DIS; + break; + default: + return; + } + + rdmsr_on_cpus(cpumask, msr_addr, msrs); + + for_each_cpu(cpu, cpumask) { + struct msr *reg = per_cpu_ptr(msrs, cpu); + if (enable) + reg->q &= ~msr_mask; + else + reg->q |= msr_mask; + } + + wrmsr_on_cpus(cpumask, msr_addr, msrs); +} + +static ssize_t _store_boost(const char *buf, size_t count) +{ + int ret; + unsigned long val = 0; + + if (!boost_supported) + return -EINVAL; + + ret = kstrtoul(buf, 10, &val); + if (ret || (val > 1)) + return -EINVAL; + + if ((val && boost_enabled) || (!val && !boost_enabled)) + return count; + + get_online_cpus(); + + boost_set_msrs(val, cpu_online_mask); + + put_online_cpus(); + + boost_enabled = val; + pr_debug("Core Boosting %sabled.\n", val ? "en" : "dis"); + + return count; +} + +static ssize_t store_global_boost(struct kobject *kobj, struct attribute *attr, + const char *buf, size_t count) +{ + return _store_boost(buf, count); +} + +static ssize_t show_global_boost(struct kobject *kobj, + struct attribute *attr, char *buf) +{ + return sprintf(buf, "%u\n", boost_enabled); +} + +static struct global_attr global_boost = __ATTR(boost, 0644, + show_global_boost, + store_global_boost); + +#ifdef CONFIG_X86_ACPI_CPUFREQ_CPB +static ssize_t store_cpb(struct cpufreq_policy *policy, const char *buf, + size_t count) +{ + return _store_boost(buf, count); +} + +static ssize_t show_cpb(struct cpufreq_policy *policy, char *buf) +{ + return sprintf(buf, "%u\n", boost_enabled); +} + +static struct freq_attr cpb = __ATTR(cpb, 0644, show_cpb, store_cpb); +#endif static int check_est_cpu(unsigned int cpuid) { @@ -82,6 +198,13 @@ static int check_est_cpu(unsigned int cpuid) return cpu_has(cpu, X86_FEATURE_EST); } +static int check_amd_hwpstate_cpu(unsigned int cpuid) +{ + struct cpuinfo_x86 *cpu = &cpu_data(cpuid); + + return cpu_has(cpu, X86_FEATURE_HW_PSTATE); +} + static unsigned extract_io(u32 value, struct acpi_cpufreq_data *data) { struct acpi_processor_performance *perf; @@ -101,7 +224,11 @@ static unsigned extract_msr(u32 msr, struct acpi_cpufreq_data *data) int i; struct acpi_processor_performance *perf; - msr &= INTEL_MSR_RANGE; + if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD) + msr &= AMD_MSR_RANGE; + else + msr &= INTEL_MSR_RANGE; + perf = data->acpi_data; for (i = 0; data->freq_table[i].frequency != CPUFREQ_TABLE_END; i++) { @@ -115,6 +242,7 @@ static unsigned extract_freq(u32 val, struct acpi_cpufreq_data *data) { switch (data->cpu_feature) { case SYSTEM_INTEL_MSR_CAPABLE: + case SYSTEM_AMD_MSR_CAPABLE: return extract_msr(val, data); case SYSTEM_IO_CAPABLE: return extract_io(val, data); @@ -150,6 +278,7 @@ static void do_drv_read(void *_cmd) switch (cmd->type) { case SYSTEM_INTEL_MSR_CAPABLE: + case SYSTEM_AMD_MSR_CAPABLE: rdmsr(cmd->addr.msr.reg, cmd->val, h); break; case SYSTEM_IO_CAPABLE: @@ -174,6 +303,9 @@ static void do_drv_write(void *_cmd) lo = (lo & ~INTEL_MSR_RANGE) | (cmd->val & INTEL_MSR_RANGE); wrmsr(cmd->addr.msr.reg, lo, hi); break; + case SYSTEM_AMD_MSR_CAPABLE: + wrmsr(cmd->addr.msr.reg, cmd->val, 0); + break; case SYSTEM_IO_CAPABLE: acpi_os_write_port((acpi_io_address)cmd->addr.io.port, cmd->val, @@ -217,6 +349,10 @@ static u32 get_cur_val(const struct cpumask *mask) cmd.type = SYSTEM_INTEL_MSR_CAPABLE; cmd.addr.msr.reg = MSR_IA32_PERF_STATUS; break; + case SYSTEM_AMD_MSR_CAPABLE: + cmd.type = SYSTEM_AMD_MSR_CAPABLE; + cmd.addr.msr.reg = MSR_AMD_PERF_STATUS; + break; case SYSTEM_IO_CAPABLE: cmd.type = SYSTEM_IO_CAPABLE; perf = per_cpu(acfreq_data, cpumask_first(mask))->acpi_data; @@ -326,6 +462,11 @@ static int acpi_cpufreq_target(struct cpufreq_policy *policy, cmd.addr.msr.reg = MSR_IA32_PERF_CTL; cmd.val = (u32) perf->states[next_perf_state].control; break; + case SYSTEM_AMD_MSR_CAPABLE: + cmd.type = SYSTEM_AMD_MSR_CAPABLE; + cmd.addr.msr.reg = MSR_AMD_PERF_CTL; + cmd.val = (u32) perf->states[next_perf_state].control; + break; case SYSTEM_IO_CAPABLE: cmd.type = SYSTEM_IO_CAPABLE; cmd.addr.io.port = perf->control_register.address; @@ -419,6 +560,44 @@ static void free_acpi_perf_data(void) free_percpu(acpi_perf_data); } +static int boost_notify(struct notifier_block *nb, unsigned long action, + void *hcpu) +{ + unsigned cpu = (long)hcpu; + const struct cpumask *cpumask; + + cpumask = get_cpu_mask(cpu); + + /* + * Clear the boost-disable bit on the CPU_DOWN path so that + * this cpu cannot block the remaining ones from boosting. On + * the CPU_UP path we simply keep the boost-disable flag in + * sync with the current global state. + */ + + switch (action) { + case CPU_UP_PREPARE: + case CPU_UP_PREPARE_FROZEN: + boost_set_msrs(boost_enabled, cpumask); + break; + + case CPU_DOWN_PREPARE: + case CPU_DOWN_PREPARE_FROZEN: + boost_set_msrs(1, cpumask); + break; + + default: + break; + } + + return NOTIFY_OK; +} + + +static struct notifier_block boost_nb = { + .notifier_call = boost_notify, +}; + /* * acpi_cpufreq_early_init - initialize ACPI P-States library * @@ -559,6 +738,14 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy) policy->shared_type = CPUFREQ_SHARED_TYPE_ALL; cpumask_copy(policy->cpus, cpu_core_mask(cpu)); } + + if (check_amd_hwpstate_cpu(cpu) && !acpi_pstate_strict) { + cpumask_clear(policy->cpus); + cpumask_set_cpu(cpu, policy->cpus); + cpumask_copy(policy->related_cpus, cpu_sibling_mask(cpu)); + policy->shared_type = CPUFREQ_SHARED_TYPE_HW; + pr_info_once(PFX "overriding BIOS provided _PSD data\n"); + } #endif /* capability check */ @@ -580,12 +767,16 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy) break; case ACPI_ADR_SPACE_FIXED_HARDWARE: pr_debug("HARDWARE addr space\n"); - if (!check_est_cpu(cpu)) { - result = -ENODEV; - goto err_unreg; + if (check_est_cpu(cpu)) { + data->cpu_feature = SYSTEM_INTEL_MSR_CAPABLE; + break; } - data->cpu_feature = SYSTEM_INTEL_MSR_CAPABLE; - break; + if (check_amd_hwpstate_cpu(cpu)) { + data->cpu_feature = SYSTEM_AMD_MSR_CAPABLE; + break; + } + result = -ENODEV; + goto err_unreg; default: pr_debug("Unknown addr space %d\n", (u32) (perf->control_register.space_id)); @@ -718,6 +909,7 @@ static int acpi_cpufreq_resume(struct cpufreq_policy *policy) static struct freq_attr *acpi_cpufreq_attr[] = { &cpufreq_freq_attr_scaling_available_freqs, + NULL, /* this is a placeholder for cpb, do not remove */ NULL, }; @@ -733,6 +925,49 @@ static struct cpufreq_driver acpi_cpufreq_driver = { .attr = acpi_cpufreq_attr, }; +static void __init acpi_cpufreq_boost_init(void) +{ + if (boot_cpu_has(X86_FEATURE_CPB) || boot_cpu_has(X86_FEATURE_IDA)) { + msrs = msrs_alloc(); + + if (!msrs) + return; + + boost_supported = true; + boost_enabled = boost_state(0); + + get_online_cpus(); + + /* Force all MSRs to the same value */ + boost_set_msrs(boost_enabled, cpu_online_mask); + + register_cpu_notifier(&boost_nb); + + put_online_cpus(); + } else + global_boost.attr.mode = 0444; + + /* We create the boost file in any case, though for systems without + * hardware support it will be read-only and hardwired to return 0. + */ + if (sysfs_create_file(cpufreq_global_kobject, &(global_boost.attr))) + pr_warn(PFX "could not register global boost sysfs file\n"); + else + pr_debug("registered global boost sysfs file\n"); +} + +static void __exit acpi_cpufreq_boost_exit(void) +{ + sysfs_remove_file(cpufreq_global_kobject, &(global_boost.attr)); + + if (msrs) { + unregister_cpu_notifier(&boost_nb); + + msrs_free(msrs); + msrs = NULL; + } +} + static int __init acpi_cpufreq_init(void) { int ret; @@ -746,9 +981,32 @@ static int __init acpi_cpufreq_init(void) if (ret) return ret; +#ifdef CONFIG_X86_ACPI_CPUFREQ_CPB + /* this is a sysfs file with a strange name and an even stranger + * semantic - per CPU instantiation, but system global effect. + * Lets enable it only on AMD CPUs for compatibility reasons and + * only if configured. This is considered legacy code, which + * will probably be removed at some point in the future. + */ + if (check_amd_hwpstate_cpu(0)) { + struct freq_attr **iter; + + pr_debug("adding sysfs entry for cpb\n"); + + for (iter = acpi_cpufreq_attr; *iter != NULL; iter++) + ; + + /* make sure there is a terminator behind it */ + if (iter[1] == NULL) + *iter = &cpb; + } +#endif + ret = cpufreq_register_driver(&acpi_cpufreq_driver); if (ret) free_acpi_perf_data(); + else + acpi_cpufreq_boost_init(); return ret; } @@ -757,6 +1015,8 @@ static void __exit acpi_cpufreq_exit(void) { pr_debug("acpi_cpufreq_exit\n"); + acpi_cpufreq_boost_exit(); + cpufreq_unregister_driver(&acpi_cpufreq_driver); free_acpi_perf_data(); diff --git a/drivers/cpufreq/cpufreq-cpu0.c b/drivers/cpufreq/cpufreq-cpu0.c new file mode 100644 index 000000000000..e9158278c71d --- /dev/null +++ b/drivers/cpufreq/cpufreq-cpu0.c @@ -0,0 +1,269 @@ +/* + * Copyright (C) 2012 Freescale Semiconductor, Inc. + * + * The OPP code in function cpu0_set_target() is reused from + * drivers/cpufreq/omap-cpufreq.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/clk.h> +#include <linux/cpu.h> +#include <linux/cpufreq.h> +#include <linux/err.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/opp.h> +#include <linux/regulator/consumer.h> +#include <linux/slab.h> + +static unsigned int transition_latency; +static unsigned int voltage_tolerance; /* in percentage */ + +static struct device *cpu_dev; +static struct clk *cpu_clk; +static struct regulator *cpu_reg; +static struct cpufreq_frequency_table *freq_table; + +static int cpu0_verify_speed(struct cpufreq_policy *policy) +{ + return cpufreq_frequency_table_verify(policy, freq_table); +} + +static unsigned int cpu0_get_speed(unsigned int cpu) +{ + return clk_get_rate(cpu_clk) / 1000; +} + +static int cpu0_set_target(struct cpufreq_policy *policy, + unsigned int target_freq, unsigned int relation) +{ + struct cpufreq_freqs freqs; + struct opp *opp; + unsigned long freq_Hz, volt = 0, volt_old = 0, tol = 0; + unsigned int index, cpu; + int ret; + + ret = cpufreq_frequency_table_target(policy, freq_table, target_freq, + relation, &index); + if (ret) { + pr_err("failed to match target freqency %d: %d\n", + target_freq, ret); + return ret; + } + + freq_Hz = clk_round_rate(cpu_clk, freq_table[index].frequency * 1000); + if (freq_Hz < 0) + freq_Hz = freq_table[index].frequency * 1000; + freqs.new = freq_Hz / 1000; + freqs.old = clk_get_rate(cpu_clk) / 1000; + + if (freqs.old == freqs.new) + return 0; + + for_each_online_cpu(cpu) { + freqs.cpu = cpu; + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + } + + if (cpu_reg) { + opp = opp_find_freq_ceil(cpu_dev, &freq_Hz); + if (IS_ERR(opp)) { + pr_err("failed to find OPP for %ld\n", freq_Hz); + return PTR_ERR(opp); + } + volt = opp_get_voltage(opp); + tol = volt * voltage_tolerance / 100; + volt_old = regulator_get_voltage(cpu_reg); + } + + pr_debug("%u MHz, %ld mV --> %u MHz, %ld mV\n", + freqs.old / 1000, volt_old ? volt_old / 1000 : -1, + freqs.new / 1000, volt ? volt / 1000 : -1); + + /* scaling up? scale voltage before frequency */ + if (cpu_reg && freqs.new > freqs.old) { + ret = regulator_set_voltage_tol(cpu_reg, volt, tol); + if (ret) { + pr_err("failed to scale voltage up: %d\n", ret); + freqs.new = freqs.old; + return ret; + } + } + + ret = clk_set_rate(cpu_clk, freqs.new * 1000); + if (ret) { + pr_err("failed to set clock rate: %d\n", ret); + if (cpu_reg) + regulator_set_voltage_tol(cpu_reg, volt_old, tol); + return ret; + } + + /* scaling down? scale voltage after frequency */ + if (cpu_reg && freqs.new < freqs.old) { + ret = regulator_set_voltage_tol(cpu_reg, volt, tol); + if (ret) { + pr_err("failed to scale voltage down: %d\n", ret); + clk_set_rate(cpu_clk, freqs.old * 1000); + freqs.new = freqs.old; + return ret; + } + } + + for_each_online_cpu(cpu) { + freqs.cpu = cpu; + cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); + } + + return 0; +} + +static int cpu0_cpufreq_init(struct cpufreq_policy *policy) +{ + int ret; + + if (policy->cpu != 0) + return -EINVAL; + + ret = cpufreq_frequency_table_cpuinfo(policy, freq_table); + if (ret) { + pr_err("invalid frequency table: %d\n", ret); + return ret; + } + + policy->cpuinfo.transition_latency = transition_latency; + policy->cur = clk_get_rate(cpu_clk) / 1000; + + /* + * The driver only supports the SMP configuartion where all processors + * share the clock and voltage and clock. Use cpufreq affected_cpus + * interface to have all CPUs scaled together. + */ + policy->shared_type = CPUFREQ_SHARED_TYPE_ANY; + cpumask_setall(policy->cpus); + + cpufreq_frequency_table_get_attr(freq_table, policy->cpu); + + return 0; +} + +static int cpu0_cpufreq_exit(struct cpufreq_policy *policy) +{ + cpufreq_frequency_table_put_attr(policy->cpu); + + return 0; +} + +static struct freq_attr *cpu0_cpufreq_attr[] = { + &cpufreq_freq_attr_scaling_available_freqs, + NULL, +}; + +static struct cpufreq_driver cpu0_cpufreq_driver = { + .flags = CPUFREQ_STICKY, + .verify = cpu0_verify_speed, + .target = cpu0_set_target, + .get = cpu0_get_speed, + .init = cpu0_cpufreq_init, + .exit = cpu0_cpufreq_exit, + .name = "generic_cpu0", + .attr = cpu0_cpufreq_attr, +}; + +static int __devinit cpu0_cpufreq_driver_init(void) +{ + struct device_node *np; + int ret; + + np = of_find_node_by_path("/cpus/cpu@0"); + if (!np) { + pr_err("failed to find cpu0 node\n"); + return -ENOENT; + } + + cpu_dev = get_cpu_device(0); + if (!cpu_dev) { + pr_err("failed to get cpu0 device\n"); + ret = -ENODEV; + goto out_put_node; + } + + cpu_dev->of_node = np; + + cpu_clk = clk_get(cpu_dev, NULL); + if (IS_ERR(cpu_clk)) { + ret = PTR_ERR(cpu_clk); + pr_err("failed to get cpu0 clock: %d\n", ret); + goto out_put_node; + } + + cpu_reg = regulator_get(cpu_dev, "cpu0"); + if (IS_ERR(cpu_reg)) { + pr_warn("failed to get cpu0 regulator\n"); + cpu_reg = NULL; + } + + ret = of_init_opp_table(cpu_dev); + if (ret) { + pr_err("failed to init OPP table: %d\n", ret); + goto out_put_node; + } + + ret = opp_init_cpufreq_table(cpu_dev, &freq_table); + if (ret) { + pr_err("failed to init cpufreq table: %d\n", ret); + goto out_put_node; + } + + of_property_read_u32(np, "voltage-tolerance", &voltage_tolerance); + + if (of_property_read_u32(np, "clock-latency", &transition_latency)) + transition_latency = CPUFREQ_ETERNAL; + + if (cpu_reg) { + struct opp *opp; + unsigned long min_uV, max_uV; + int i; + + /* + * OPP is maintained in order of increasing frequency, and + * freq_table initialised from OPP is therefore sorted in the + * same order. + */ + for (i = 0; freq_table[i].frequency != CPUFREQ_TABLE_END; i++) + ; + opp = opp_find_freq_exact(cpu_dev, + freq_table[0].frequency * 1000, true); + min_uV = opp_get_voltage(opp); + opp = opp_find_freq_exact(cpu_dev, + freq_table[i-1].frequency * 1000, true); + max_uV = opp_get_voltage(opp); + ret = regulator_set_voltage_time(cpu_reg, min_uV, max_uV); + if (ret > 0) + transition_latency += ret * 1000; + } + + ret = cpufreq_register_driver(&cpu0_cpufreq_driver); + if (ret) { + pr_err("failed register driver: %d\n", ret); + goto out_free_table; + } + + of_node_put(np); + return 0; + +out_free_table: + opp_free_cpufreq_table(cpu_dev, &freq_table); +out_put_node: + of_node_put(np); + return ret; +} +late_initcall(cpu0_cpufreq_driver_init); + +MODULE_AUTHOR("Shawn Guo <shawn.guo@linaro.org>"); +MODULE_DESCRIPTION("Generic CPU0 cpufreq driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/cpufreq/cpufreq_conservative.c b/drivers/cpufreq/cpufreq_conservative.c index 235a340e81f2..b75dc2c2f8d3 100644 --- a/drivers/cpufreq/cpufreq_conservative.c +++ b/drivers/cpufreq/cpufreq_conservative.c @@ -504,6 +504,7 @@ static int cpufreq_governor_dbs(struct cpufreq_policy *policy, j_dbs_info->prev_cpu_nice = kcpustat_cpu(j).cpustat[CPUTIME_NICE]; } + this_dbs_info->cpu = cpu; this_dbs_info->down_skip = 0; this_dbs_info->requested_freq = policy->cur; @@ -583,6 +584,7 @@ static int cpufreq_governor_dbs(struct cpufreq_policy *policy, __cpufreq_driver_target( this_dbs_info->cur_policy, policy->min, CPUFREQ_RELATION_L); + dbs_check_cpu(this_dbs_info); mutex_unlock(&this_dbs_info->timer_mutex); break; diff --git a/drivers/cpufreq/cpufreq_ondemand.c b/drivers/cpufreq/cpufreq_ondemand.c index 836e9b062e5e..9479fb33c30f 100644 --- a/drivers/cpufreq/cpufreq_ondemand.c +++ b/drivers/cpufreq/cpufreq_ondemand.c @@ -761,6 +761,7 @@ static int cpufreq_governor_dbs(struct cpufreq_policy *policy, else if (policy->min > this_dbs_info->cur_policy->cur) __cpufreq_driver_target(this_dbs_info->cur_policy, policy->min, CPUFREQ_RELATION_L); + dbs_check_cpu(this_dbs_info); mutex_unlock(&this_dbs_info->timer_mutex); break; } diff --git a/drivers/cpufreq/longhaul.h b/drivers/cpufreq/longhaul.h index cbf48fbca881..e2dc436099d1 100644 --- a/drivers/cpufreq/longhaul.h +++ b/drivers/cpufreq/longhaul.h @@ -56,7 +56,7 @@ union msr_longhaul { /* * VIA C3 Samuel 1 & Samuel 2 (stepping 0) */ -static const int __cpuinitdata samuel1_mults[16] = { +static const int __cpuinitconst samuel1_mults[16] = { -1, /* 0000 -> RESERVED */ 30, /* 0001 -> 3.0x */ 40, /* 0010 -> 4.0x */ @@ -75,7 +75,7 @@ static const int __cpuinitdata samuel1_mults[16] = { -1, /* 1111 -> RESERVED */ }; -static const int __cpuinitdata samuel1_eblcr[16] = { +static const int __cpuinitconst samuel1_eblcr[16] = { 50, /* 0000 -> RESERVED */ 30, /* 0001 -> 3.0x */ 40, /* 0010 -> 4.0x */ @@ -97,7 +97,7 @@ static const int __cpuinitdata samuel1_eblcr[16] = { /* * VIA C3 Samuel2 Stepping 1->15 */ -static const int __cpuinitdata samuel2_eblcr[16] = { +static const int __cpuinitconst samuel2_eblcr[16] = { 50, /* 0000 -> 5.0x */ 30, /* 0001 -> 3.0x */ 40, /* 0010 -> 4.0x */ @@ -119,7 +119,7 @@ static const int __cpuinitdata samuel2_eblcr[16] = { /* * VIA C3 Ezra */ -static const int __cpuinitdata ezra_mults[16] = { +static const int __cpuinitconst ezra_mults[16] = { 100, /* 0000 -> 10.0x */ 30, /* 0001 -> 3.0x */ 40, /* 0010 -> 4.0x */ @@ -138,7 +138,7 @@ static const int __cpuinitdata ezra_mults[16] = { 120, /* 1111 -> 12.0x */ }; -static const int __cpuinitdata ezra_eblcr[16] = { +static const int __cpuinitconst ezra_eblcr[16] = { 50, /* 0000 -> 5.0x */ 30, /* 0001 -> 3.0x */ 40, /* 0010 -> 4.0x */ @@ -160,7 +160,7 @@ static const int __cpuinitdata ezra_eblcr[16] = { /* * VIA C3 (Ezra-T) [C5M]. */ -static const int __cpuinitdata ezrat_mults[32] = { +static const int __cpuinitconst ezrat_mults[32] = { 100, /* 0000 -> 10.0x */ 30, /* 0001 -> 3.0x */ 40, /* 0010 -> 4.0x */ @@ -196,7 +196,7 @@ static const int __cpuinitdata ezrat_mults[32] = { -1, /* 1111 -> RESERVED (12.0x) */ }; -static const int __cpuinitdata ezrat_eblcr[32] = { +static const int __cpuinitconst ezrat_eblcr[32] = { 50, /* 0000 -> 5.0x */ 30, /* 0001 -> 3.0x */ 40, /* 0010 -> 4.0x */ @@ -235,7 +235,7 @@ static const int __cpuinitdata ezrat_eblcr[32] = { /* * VIA C3 Nehemiah */ -static const int __cpuinitdata nehemiah_mults[32] = { +static const int __cpuinitconst nehemiah_mults[32] = { 100, /* 0000 -> 10.0x */ -1, /* 0001 -> 16.0x */ 40, /* 0010 -> 4.0x */ @@ -270,7 +270,7 @@ static const int __cpuinitdata nehemiah_mults[32] = { -1, /* 1111 -> 12.0x */ }; -static const int __cpuinitdata nehemiah_eblcr[32] = { +static const int __cpuinitconst nehemiah_eblcr[32] = { 50, /* 0000 -> 5.0x */ 160, /* 0001 -> 16.0x */ 40, /* 0010 -> 4.0x */ @@ -315,7 +315,7 @@ struct mV_pos { unsigned short pos; }; -static const struct mV_pos __cpuinitdata vrm85_mV[32] = { +static const struct mV_pos __cpuinitconst vrm85_mV[32] = { {1250, 8}, {1200, 6}, {1150, 4}, {1100, 2}, {1050, 0}, {1800, 30}, {1750, 28}, {1700, 26}, {1650, 24}, {1600, 22}, {1550, 20}, {1500, 18}, @@ -326,14 +326,14 @@ static const struct mV_pos __cpuinitdata vrm85_mV[32] = { {1475, 17}, {1425, 15}, {1375, 13}, {1325, 11} }; -static const unsigned char __cpuinitdata mV_vrm85[32] = { +static const unsigned char __cpuinitconst mV_vrm85[32] = { 0x04, 0x14, 0x03, 0x13, 0x02, 0x12, 0x01, 0x11, 0x00, 0x10, 0x0f, 0x1f, 0x0e, 0x1e, 0x0d, 0x1d, 0x0c, 0x1c, 0x0b, 0x1b, 0x0a, 0x1a, 0x09, 0x19, 0x08, 0x18, 0x07, 0x17, 0x06, 0x16, 0x05, 0x15 }; -static const struct mV_pos __cpuinitdata mobilevrm_mV[32] = { +static const struct mV_pos __cpuinitconst mobilevrm_mV[32] = { {1750, 31}, {1700, 30}, {1650, 29}, {1600, 28}, {1550, 27}, {1500, 26}, {1450, 25}, {1400, 24}, {1350, 23}, {1300, 22}, {1250, 21}, {1200, 20}, @@ -344,7 +344,7 @@ static const struct mV_pos __cpuinitdata mobilevrm_mV[32] = { {675, 3}, {650, 2}, {625, 1}, {600, 0} }; -static const unsigned char __cpuinitdata mV_mobilevrm[32] = { +static const unsigned char __cpuinitconst mV_mobilevrm[32] = { 0x1f, 0x1e, 0x1d, 0x1c, 0x1b, 0x1a, 0x19, 0x18, 0x17, 0x16, 0x15, 0x14, 0x13, 0x12, 0x11, 0x10, 0x0f, 0x0e, 0x0d, 0x0c, 0x0b, 0x0a, 0x09, 0x08, diff --git a/drivers/cpufreq/omap-cpufreq.c b/drivers/cpufreq/omap-cpufreq.c index b47034e650a5..6e22f4481c07 100644 --- a/drivers/cpufreq/omap-cpufreq.c +++ b/drivers/cpufreq/omap-cpufreq.c @@ -40,16 +40,6 @@ /* OPP tolerance in percentage */ #define OPP_TOLERANCE 4 -#ifdef CONFIG_SMP -struct lpj_info { - unsigned long ref; - unsigned int freq; -}; - -static DEFINE_PER_CPU(struct lpj_info, lpj_ref); -static struct lpj_info global_lpj_ref; -#endif - static struct cpufreq_frequency_table *freq_table; static atomic_t freq_table_users = ATOMIC_INIT(0); static struct clk *mpu_clk; @@ -161,31 +151,6 @@ static int omap_target(struct cpufreq_policy *policy, } freqs.new = omap_getspeed(policy->cpu); -#ifdef CONFIG_SMP - /* - * Note that loops_per_jiffy is not updated on SMP systems in - * cpufreq driver. So, update the per-CPU loops_per_jiffy value - * on frequency transition. We need to update all dependent CPUs. - */ - for_each_cpu(i, policy->cpus) { - struct lpj_info *lpj = &per_cpu(lpj_ref, i); - if (!lpj->freq) { - lpj->ref = per_cpu(cpu_data, i).loops_per_jiffy; - lpj->freq = freqs.old; - } - - per_cpu(cpu_data, i).loops_per_jiffy = - cpufreq_scale(lpj->ref, lpj->freq, freqs.new); - } - - /* And don't forget to adjust the global one */ - if (!global_lpj_ref.freq) { - global_lpj_ref.ref = loops_per_jiffy; - global_lpj_ref.freq = freqs.old; - } - loops_per_jiffy = cpufreq_scale(global_lpj_ref.ref, global_lpj_ref.freq, - freqs.new); -#endif done: /* notifiers */ diff --git a/drivers/cpufreq/powernow-k8.c b/drivers/cpufreq/powernow-k8.c index c0e816468e30..0b19faf002ee 100644 --- a/drivers/cpufreq/powernow-k8.c +++ b/drivers/cpufreq/powernow-k8.c @@ -49,22 +49,12 @@ #define PFX "powernow-k8: " #define VERSION "version 2.20.00" #include "powernow-k8.h" -#include "mperf.h" /* serialize freq changes */ static DEFINE_MUTEX(fidvid_mutex); static DEFINE_PER_CPU(struct powernow_k8_data *, powernow_data); -static int cpu_family = CPU_OPTERON; - -/* array to map SW pstate number to acpi state */ -static u32 ps_to_as[8]; - -/* core performance boost */ -static bool cpb_capable, cpb_enabled; -static struct msr __percpu *msrs; - static struct cpufreq_driver cpufreq_amd64_driver; #ifndef CONFIG_SMP @@ -86,12 +76,6 @@ static u32 find_khz_freq_from_fid(u32 fid) return 1000 * find_freq_from_fid(fid); } -static u32 find_khz_freq_from_pstate(struct cpufreq_frequency_table *data, - u32 pstate) -{ - return data[ps_to_as[pstate]].frequency; -} - /* Return the vco fid for an input fid * * Each "low" fid has corresponding "high" fid, and you can get to "low" fids @@ -114,9 +98,6 @@ static int pending_bit_stuck(void) { u32 lo, hi; - if (cpu_family == CPU_HW_PSTATE) - return 0; - rdmsr(MSR_FIDVID_STATUS, lo, hi); return lo & MSR_S_LO_CHANGE_PENDING ? 1 : 0; } @@ -130,20 +111,6 @@ static int query_current_values_with_pending_wait(struct powernow_k8_data *data) u32 lo, hi; u32 i = 0; - if (cpu_family == CPU_HW_PSTATE) { - rdmsr(MSR_PSTATE_STATUS, lo, hi); - i = lo & HW_PSTATE_MASK; - data->currpstate = i; - - /* - * a workaround for family 11h erratum 311 might cause - * an "out-of-range Pstate if the core is in Pstate-0 - */ - if ((boot_cpu_data.x86 == 0x11) && (i >= data->numps)) - data->currpstate = HW_PSTATE_0; - - return 0; - } do { if (i++ > 10000) { pr_debug("detected change pending stuck\n"); @@ -300,14 +267,6 @@ static int decrease_vid_code_by_step(struct powernow_k8_data *data, return 0; } -/* Change hardware pstate by single MSR write */ -static int transition_pstate(struct powernow_k8_data *data, u32 pstate) -{ - wrmsr(MSR_PSTATE_CTRL, pstate, 0); - data->currpstate = pstate; - return 0; -} - /* Change Opteron/Athlon64 fid and vid, by the 3 phases. */ static int transition_fid_vid(struct powernow_k8_data *data, u32 reqfid, u32 reqvid) @@ -524,8 +483,6 @@ static int core_voltage_post_transition(struct powernow_k8_data *data, static const struct x86_cpu_id powernow_k8_ids[] = { /* IO based frequency switching */ { X86_VENDOR_AMD, 0xf }, - /* MSR based frequency switching supported */ - X86_FEATURE_MATCH(X86_FEATURE_HW_PSTATE), {} }; MODULE_DEVICE_TABLE(x86cpu, powernow_k8_ids); @@ -561,15 +518,8 @@ static void check_supported_cpu(void *_rc) "Power state transitions not supported\n"); return; } - } else { /* must be a HW Pstate capable processor */ - cpuid(CPUID_FREQ_VOLT_CAPABILITIES, &eax, &ebx, &ecx, &edx); - if ((edx & USE_HW_PSTATE) == USE_HW_PSTATE) - cpu_family = CPU_HW_PSTATE; - else - return; + *rc = 0; } - - *rc = 0; } static int check_pst_table(struct powernow_k8_data *data, struct pst_s *pst, @@ -633,18 +583,11 @@ static void print_basics(struct powernow_k8_data *data) for (j = 0; j < data->numps; j++) { if (data->powernow_table[j].frequency != CPUFREQ_ENTRY_INVALID) { - if (cpu_family == CPU_HW_PSTATE) { - printk(KERN_INFO PFX - " %d : pstate %d (%d MHz)\n", j, - data->powernow_table[j].index, - data->powernow_table[j].frequency/1000); - } else { printk(KERN_INFO PFX "fid 0x%x (%d MHz), vid 0x%x\n", data->powernow_table[j].index & 0xff, data->powernow_table[j].frequency/1000, data->powernow_table[j].index >> 8); - } } } if (data->batps) @@ -652,20 +595,6 @@ static void print_basics(struct powernow_k8_data *data) data->batps); } -static u32 freq_from_fid_did(u32 fid, u32 did) -{ - u32 mhz = 0; - - if (boot_cpu_data.x86 == 0x10) - mhz = (100 * (fid + 0x10)) >> did; - else if (boot_cpu_data.x86 == 0x11) - mhz = (100 * (fid + 8)) >> did; - else - BUG(); - - return mhz * 1000; -} - static int fill_powernow_table(struct powernow_k8_data *data, struct pst_s *pst, u8 maxvid) { @@ -825,7 +754,7 @@ static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data, { u64 control; - if (!data->acpi_data.state_count || (cpu_family == CPU_HW_PSTATE)) + if (!data->acpi_data.state_count) return; control = data->acpi_data.states[index].control; @@ -876,10 +805,7 @@ static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data) data->numps = data->acpi_data.state_count; powernow_k8_acpi_pst_values(data, 0); - if (cpu_family == CPU_HW_PSTATE) - ret_val = fill_powernow_table_pstate(data, powernow_table); - else - ret_val = fill_powernow_table_fidvid(data, powernow_table); + ret_val = fill_powernow_table_fidvid(data, powernow_table); if (ret_val) goto err_out_mem; @@ -916,51 +842,6 @@ err_out: return ret_val; } -static int fill_powernow_table_pstate(struct powernow_k8_data *data, - struct cpufreq_frequency_table *powernow_table) -{ - int i; - u32 hi = 0, lo = 0; - rdmsr(MSR_PSTATE_CUR_LIMIT, lo, hi); - data->max_hw_pstate = (lo & HW_PSTATE_MAX_MASK) >> HW_PSTATE_MAX_SHIFT; - - for (i = 0; i < data->acpi_data.state_count; i++) { - u32 index; - - index = data->acpi_data.states[i].control & HW_PSTATE_MASK; - if (index > data->max_hw_pstate) { - printk(KERN_ERR PFX "invalid pstate %d - " - "bad value %d.\n", i, index); - printk(KERN_ERR PFX "Please report to BIOS " - "manufacturer\n"); - invalidate_entry(powernow_table, i); - continue; - } - - ps_to_as[index] = i; - - /* Frequency may be rounded for these */ - if ((boot_cpu_data.x86 == 0x10 && boot_cpu_data.x86_model < 10) - || boot_cpu_data.x86 == 0x11) { - - rdmsr(MSR_PSTATE_DEF_BASE + index, lo, hi); - if (!(hi & HW_PSTATE_VALID_MASK)) { - pr_debug("invalid pstate %d, ignoring\n", index); - invalidate_entry(powernow_table, i); - continue; - } - - powernow_table[i].frequency = - freq_from_fid_did(lo & 0x3f, (lo >> 6) & 7); - } else - powernow_table[i].frequency = - data->acpi_data.states[i].core_frequency * 1000; - - powernow_table[i].index = index; - } - return 0; -} - static int fill_powernow_table_fidvid(struct powernow_k8_data *data, struct cpufreq_frequency_table *powernow_table) { @@ -1037,15 +918,7 @@ static int get_transition_latency(struct powernow_k8_data *data) max_latency = cur_latency; } if (max_latency == 0) { - /* - * Fam 11h and later may return 0 as transition latency. This - * is intended and means "very fast". While cpufreq core and - * governors currently can handle that gracefully, better set it - * to 1 to avoid problems in the future. - */ - if (boot_cpu_data.x86 < 0x11) - printk(KERN_ERR FW_WARN PFX "Invalid zero transition " - "latency\n"); + pr_err(FW_WARN PFX "Invalid zero transition latency\n"); max_latency = 1; } /* value in usecs, needs to be in nanoseconds */ @@ -1105,40 +978,6 @@ static int transition_frequency_fidvid(struct powernow_k8_data *data, return res; } -/* Take a frequency, and issue the hardware pstate transition command */ -static int transition_frequency_pstate(struct powernow_k8_data *data, - unsigned int index) -{ - u32 pstate = 0; - int res, i; - struct cpufreq_freqs freqs; - - pr_debug("cpu %d transition to index %u\n", smp_processor_id(), index); - - /* get MSR index for hardware pstate transition */ - pstate = index & HW_PSTATE_MASK; - if (pstate > data->max_hw_pstate) - return -EINVAL; - - freqs.old = find_khz_freq_from_pstate(data->powernow_table, - data->currpstate); - freqs.new = find_khz_freq_from_pstate(data->powernow_table, pstate); - - for_each_cpu(i, data->available_cores) { - freqs.cpu = i; - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - } - - res = transition_pstate(data, pstate); - freqs.new = find_khz_freq_from_pstate(data->powernow_table, pstate); - - for_each_cpu(i, data->available_cores) { - freqs.cpu = i; - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - } - return res; -} - /* Driver entry point to switch to the target frequency */ static int powernowk8_target(struct cpufreq_policy *pol, unsigned targfreq, unsigned relation) @@ -1180,18 +1019,15 @@ static int powernowk8_target(struct cpufreq_policy *pol, if (query_current_values_with_pending_wait(data)) goto err_out; - if (cpu_family != CPU_HW_PSTATE) { - pr_debug("targ: curr fid 0x%x, vid 0x%x\n", - data->currfid, data->currvid); + pr_debug("targ: curr fid 0x%x, vid 0x%x\n", + data->currfid, data->currvid); - if ((checkvid != data->currvid) || - (checkfid != data->currfid)) { - printk(KERN_INFO PFX - "error - out of sync, fix 0x%x 0x%x, " - "vid 0x%x 0x%x\n", - checkfid, data->currfid, - checkvid, data->currvid); - } + if ((checkvid != data->currvid) || + (checkfid != data->currfid)) { + pr_info(PFX + "error - out of sync, fix 0x%x 0x%x, vid 0x%x 0x%x\n", + checkfid, data->currfid, + checkvid, data->currvid); } if (cpufreq_frequency_table_target(pol, data->powernow_table, @@ -1202,11 +1038,8 @@ static int powernowk8_target(struct cpufreq_policy *pol, powernow_k8_acpi_pst_values(data, newstate); - if (cpu_family == CPU_HW_PSTATE) - ret = transition_frequency_pstate(data, - data->powernow_table[newstate].index); - else - ret = transition_frequency_fidvid(data, newstate); + ret = transition_frequency_fidvid(data, newstate); + if (ret) { printk(KERN_ERR PFX "transition frequency failed\n"); ret = 1; @@ -1215,11 +1048,7 @@ static int powernowk8_target(struct cpufreq_policy *pol, } mutex_unlock(&fidvid_mutex); - if (cpu_family == CPU_HW_PSTATE) - pol->cur = find_khz_freq_from_pstate(data->powernow_table, - data->powernow_table[newstate].index); - else - pol->cur = find_khz_freq_from_fid(data->currfid); + pol->cur = find_khz_freq_from_fid(data->currfid); ret = 0; err_out: @@ -1259,22 +1088,23 @@ static void __cpuinit powernowk8_cpu_init_on_cpu(void *_init_on_cpu) return; } - if (cpu_family == CPU_OPTERON) - fidvid_msr_init(); + fidvid_msr_init(); init_on_cpu->rc = 0; } +static const char missing_pss_msg[] = + KERN_ERR + FW_BUG PFX "No compatible ACPI _PSS objects found.\n" + FW_BUG PFX "First, make sure Cool'N'Quiet is enabled in the BIOS.\n" + FW_BUG PFX "If that doesn't help, try upgrading your BIOS.\n"; + /* per CPU init entry point to the driver */ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol) { - static const char ACPI_PSS_BIOS_BUG_MSG[] = - KERN_ERR FW_BUG PFX "No compatible ACPI _PSS objects found.\n" - FW_BUG PFX "Try again with latest BIOS.\n"; struct powernow_k8_data *data; struct init_on_cpu init_on_cpu; int rc; - struct cpuinfo_x86 *c = &cpu_data(pol->cpu); if (!cpu_online(pol->cpu)) return -ENODEV; @@ -1290,7 +1120,6 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol) } data->cpu = pol->cpu; - data->currpstate = HW_PSTATE_INVALID; if (powernow_k8_cpu_init_acpi(data)) { /* @@ -1298,7 +1127,7 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol) * an UP version, and is deprecated by AMD. */ if (num_online_cpus() != 1) { - printk_once(ACPI_PSS_BIOS_BUG_MSG); + printk_once(missing_pss_msg); goto err_out; } if (pol->cpu != 0) { @@ -1327,17 +1156,10 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol) if (rc != 0) goto err_out_exit_acpi; - if (cpu_family == CPU_HW_PSTATE) - cpumask_copy(pol->cpus, cpumask_of(pol->cpu)); - else - cpumask_copy(pol->cpus, cpu_core_mask(pol->cpu)); + cpumask_copy(pol->cpus, cpu_core_mask(pol->cpu)); data->available_cores = pol->cpus; - if (cpu_family == CPU_HW_PSTATE) - pol->cur = find_khz_freq_from_pstate(data->powernow_table, - data->currpstate); - else - pol->cur = find_khz_freq_from_fid(data->currfid); + pol->cur = find_khz_freq_from_fid(data->currfid); pr_debug("policy current frequency %d kHz\n", pol->cur); /* min/max the cpu is capable of */ @@ -1349,18 +1171,10 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol) return -EINVAL; } - /* Check for APERF/MPERF support in hardware */ - if (cpu_has(c, X86_FEATURE_APERFMPERF)) - cpufreq_amd64_driver.getavg = cpufreq_get_measured_perf; - cpufreq_frequency_table_get_attr(data->powernow_table, pol->cpu); - if (cpu_family == CPU_HW_PSTATE) - pr_debug("cpu_init done, current pstate 0x%x\n", - data->currpstate); - else - pr_debug("cpu_init done, current fid 0x%x, vid 0x%x\n", - data->currfid, data->currvid); + pr_debug("cpu_init done, current fid 0x%x, vid 0x%x\n", + data->currfid, data->currvid); per_cpu(powernow_data, pol->cpu) = data; @@ -1413,88 +1227,15 @@ static unsigned int powernowk8_get(unsigned int cpu) if (err) goto out; - if (cpu_family == CPU_HW_PSTATE) - khz = find_khz_freq_from_pstate(data->powernow_table, - data->currpstate); - else - khz = find_khz_freq_from_fid(data->currfid); + khz = find_khz_freq_from_fid(data->currfid); out: return khz; } -static void _cpb_toggle_msrs(bool t) -{ - int cpu; - - get_online_cpus(); - - rdmsr_on_cpus(cpu_online_mask, MSR_K7_HWCR, msrs); - - for_each_cpu(cpu, cpu_online_mask) { - struct msr *reg = per_cpu_ptr(msrs, cpu); - if (t) - reg->l &= ~BIT(25); - else - reg->l |= BIT(25); - } - wrmsr_on_cpus(cpu_online_mask, MSR_K7_HWCR, msrs); - - put_online_cpus(); -} - -/* - * Switch on/off core performance boosting. - * - * 0=disable - * 1=enable. - */ -static void cpb_toggle(bool t) -{ - if (!cpb_capable) - return; - - if (t && !cpb_enabled) { - cpb_enabled = true; - _cpb_toggle_msrs(t); - printk(KERN_INFO PFX "Core Boosting enabled.\n"); - } else if (!t && cpb_enabled) { - cpb_enabled = false; - _cpb_toggle_msrs(t); - printk(KERN_INFO PFX "Core Boosting disabled.\n"); - } -} - -static ssize_t store_cpb(struct cpufreq_policy *policy, const char *buf, - size_t count) -{ - int ret = -EINVAL; - unsigned long val = 0; - - ret = strict_strtoul(buf, 10, &val); - if (!ret && (val == 0 || val == 1) && cpb_capable) - cpb_toggle(val); - else - return -EINVAL; - - return count; -} - -static ssize_t show_cpb(struct cpufreq_policy *policy, char *buf) -{ - return sprintf(buf, "%u\n", cpb_enabled); -} - -#define define_one_rw(_name) \ -static struct freq_attr _name = \ -__ATTR(_name, 0644, show_##_name, store_##_name) - -define_one_rw(cpb); - static struct freq_attr *powernow_k8_attr[] = { &cpufreq_freq_attr_scaling_available_freqs, - &cpb, NULL, }; @@ -1510,53 +1251,18 @@ static struct cpufreq_driver cpufreq_amd64_driver = { .attr = powernow_k8_attr, }; -/* - * Clear the boost-disable flag on the CPU_DOWN path so that this cpu - * cannot block the remaining ones from boosting. On the CPU_UP path we - * simply keep the boost-disable flag in sync with the current global - * state. - */ -static int cpb_notify(struct notifier_block *nb, unsigned long action, - void *hcpu) -{ - unsigned cpu = (long)hcpu; - u32 lo, hi; - - switch (action) { - case CPU_UP_PREPARE: - case CPU_UP_PREPARE_FROZEN: - - if (!cpb_enabled) { - rdmsr_on_cpu(cpu, MSR_K7_HWCR, &lo, &hi); - lo |= BIT(25); - wrmsr_on_cpu(cpu, MSR_K7_HWCR, lo, hi); - } - break; - - case CPU_DOWN_PREPARE: - case CPU_DOWN_PREPARE_FROZEN: - rdmsr_on_cpu(cpu, MSR_K7_HWCR, &lo, &hi); - lo &= ~BIT(25); - wrmsr_on_cpu(cpu, MSR_K7_HWCR, lo, hi); - break; - - default: - break; - } - - return NOTIFY_OK; -} - -static struct notifier_block cpb_nb = { - .notifier_call = cpb_notify, -}; - /* driver entry point for init */ static int __cpuinit powernowk8_init(void) { - unsigned int i, supported_cpus = 0, cpu; + unsigned int i, supported_cpus = 0; int rv; + if (static_cpu_has(X86_FEATURE_HW_PSTATE)) { + pr_warn(PFX "this CPU is not supported anymore, using acpi-cpufreq instead.\n"); + request_module("acpi-cpufreq"); + return -ENODEV; + } + if (!x86_match_cpu(powernow_k8_ids)) return -ENODEV; @@ -1570,38 +1276,13 @@ static int __cpuinit powernowk8_init(void) if (supported_cpus != num_online_cpus()) return -ENODEV; - printk(KERN_INFO PFX "Found %d %s (%d cpu cores) (" VERSION ")\n", - num_online_nodes(), boot_cpu_data.x86_model_id, supported_cpus); - - if (boot_cpu_has(X86_FEATURE_CPB)) { - - cpb_capable = true; - - msrs = msrs_alloc(); - if (!msrs) { - printk(KERN_ERR "%s: Error allocating msrs!\n", __func__); - return -ENOMEM; - } - - register_cpu_notifier(&cpb_nb); - - rdmsr_on_cpus(cpu_online_mask, MSR_K7_HWCR, msrs); + rv = cpufreq_register_driver(&cpufreq_amd64_driver); - for_each_cpu(cpu, cpu_online_mask) { - struct msr *reg = per_cpu_ptr(msrs, cpu); - cpb_enabled |= !(!!(reg->l & BIT(25))); - } + if (!rv) + pr_info(PFX "Found %d %s (%d cpu cores) (" VERSION ")\n", + num_online_nodes(), boot_cpu_data.x86_model_id, + supported_cpus); - printk(KERN_INFO PFX "Core Performance Boosting: %s.\n", - (cpb_enabled ? "on" : "off")); - } - - rv = cpufreq_register_driver(&cpufreq_amd64_driver); - if (rv < 0 && boot_cpu_has(X86_FEATURE_CPB)) { - unregister_cpu_notifier(&cpb_nb); - msrs_free(msrs); - msrs = NULL; - } return rv; } @@ -1610,13 +1291,6 @@ static void __exit powernowk8_exit(void) { pr_debug("exit\n"); - if (boot_cpu_has(X86_FEATURE_CPB)) { - msrs_free(msrs); - msrs = NULL; - - unregister_cpu_notifier(&cpb_nb); - } - cpufreq_unregister_driver(&cpufreq_amd64_driver); } diff --git a/drivers/cpufreq/powernow-k8.h b/drivers/cpufreq/powernow-k8.h index 3744d26cdc2b..79329d4d5abe 100644 --- a/drivers/cpufreq/powernow-k8.h +++ b/drivers/cpufreq/powernow-k8.h @@ -5,24 +5,11 @@ * http://www.gnu.org/licenses/gpl.html */ -enum pstate { - HW_PSTATE_INVALID = 0xff, - HW_PSTATE_0 = 0, - HW_PSTATE_1 = 1, - HW_PSTATE_2 = 2, - HW_PSTATE_3 = 3, - HW_PSTATE_4 = 4, - HW_PSTATE_5 = 5, - HW_PSTATE_6 = 6, - HW_PSTATE_7 = 7, -}; - struct powernow_k8_data { unsigned int cpu; u32 numps; /* number of p-states */ u32 batps; /* number of p-states supported on battery */ - u32 max_hw_pstate; /* maximum legal hardware pstate */ /* these values are constant when the PSB is used to determine * vid/fid pairings, but are modified during the ->target() call @@ -37,7 +24,6 @@ struct powernow_k8_data { /* keep track of the current fid / vid or pstate */ u32 currvid; u32 currfid; - enum pstate currpstate; /* the powernow_table includes all frequency and vid/fid pairings: * fid are the lower 8 bits of the index, vid are the upper 8 bits. @@ -97,23 +83,6 @@ struct powernow_k8_data { #define MSR_S_HI_CURRENT_VID 0x0000003f #define MSR_C_HI_STP_GNT_BENIGN 0x00000001 - -/* Hardware Pstate _PSS and MSR definitions */ -#define USE_HW_PSTATE 0x00000080 -#define HW_PSTATE_MASK 0x00000007 -#define HW_PSTATE_VALID_MASK 0x80000000 -#define HW_PSTATE_MAX_MASK 0x000000f0 -#define HW_PSTATE_MAX_SHIFT 4 -#define MSR_PSTATE_DEF_BASE 0xc0010064 /* base of Pstate MSRs */ -#define MSR_PSTATE_STATUS 0xc0010063 /* Pstate Status MSR */ -#define MSR_PSTATE_CTRL 0xc0010062 /* Pstate control MSR */ -#define MSR_PSTATE_CUR_LIMIT 0xc0010061 /* pstate current limit MSR */ - -/* define the two driver architectures */ -#define CPU_OPTERON 0 -#define CPU_HW_PSTATE 1 - - /* * There are restrictions frequencies have to follow: * - only 1 entry in the low fid table ( <=1.4GHz ) @@ -218,5 +187,4 @@ static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid); static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data, unsigned int index); -static int fill_powernow_table_pstate(struct powernow_k8_data *data, struct cpufreq_frequency_table *powernow_table); static int fill_powernow_table_fidvid(struct powernow_k8_data *data, struct cpufreq_frequency_table *powernow_table); diff --git a/include/linux/opp.h b/include/linux/opp.h index 2a4e5faee904..214e0ebcb84d 100644 --- a/include/linux/opp.h +++ b/include/linux/opp.h @@ -48,6 +48,14 @@ int opp_disable(struct device *dev, unsigned long freq); struct srcu_notifier_head *opp_get_notifier(struct device *dev); +#ifdef CONFIG_OF +int of_init_opp_table(struct device *dev); +#else +static inline int of_init_opp_table(struct device *dev) +{ + return -EINVAL; +} +#endif /* CONFIG_OF */ #else static inline unsigned long opp_get_voltage(struct opp *opp) { |
