summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--drivers/input/misc/uinput.c1
-rw-r--r--drivers/input/serio/serio.c55
-rw-r--r--drivers/input/touchscreen/Kconfig12
-rw-r--r--drivers/input/touchscreen/Makefile1
-rw-r--r--drivers/input/touchscreen/ads7846.c16
-rw-r--r--drivers/input/touchscreen/atmel_tsadcc.c332
-rw-r--r--include/linux/serio.h3
7 files changed, 390 insertions, 30 deletions
diff --git a/drivers/input/misc/uinput.c b/drivers/input/misc/uinput.c
index 2bcfa0b35061..223d56d5555b 100644
--- a/drivers/input/misc/uinput.c
+++ b/drivers/input/misc/uinput.c
@@ -37,7 +37,6 @@
#include <linux/fs.h>
#include <linux/miscdevice.h>
#include <linux/uinput.h>
-#include <linux/smp_lock.h>
static int uinput_dev_event(struct input_dev *dev, unsigned int type, unsigned int code, int value)
{
diff --git a/drivers/input/serio/serio.c b/drivers/input/serio/serio.c
index 78f2abb5c11b..2f12d60eee3b 100644
--- a/drivers/input/serio/serio.c
+++ b/drivers/input/serio/serio.c
@@ -63,8 +63,9 @@ static LIST_HEAD(serio_list);
static struct bus_type serio_bus;
static void serio_add_port(struct serio *serio);
-static void serio_reconnect_port(struct serio *serio);
+static int serio_reconnect_port(struct serio *serio);
static void serio_disconnect_port(struct serio *serio);
+static void serio_reconnect_chain(struct serio *serio);
static void serio_attach_driver(struct serio_driver *drv);
static int serio_connect_driver(struct serio *serio, struct serio_driver *drv)
@@ -161,6 +162,7 @@ static void serio_find_driver(struct serio *serio)
enum serio_event_type {
SERIO_RESCAN_PORT,
SERIO_RECONNECT_PORT,
+ SERIO_RECONNECT_CHAIN,
SERIO_REGISTER_PORT,
SERIO_ATTACH_DRIVER,
};
@@ -315,6 +317,10 @@ static void serio_handle_event(void)
serio_find_driver(event->object);
break;
+ case SERIO_RECONNECT_CHAIN:
+ serio_reconnect_chain(event->object);
+ break;
+
case SERIO_ATTACH_DRIVER:
serio_attach_driver(event->object);
break;
@@ -470,7 +476,7 @@ static ssize_t serio_rebind_driver(struct device *dev, struct device_attribute *
if (!strncmp(buf, "none", count)) {
serio_disconnect_port(serio);
} else if (!strncmp(buf, "reconnect", count)) {
- serio_reconnect_port(serio);
+ serio_reconnect_chain(serio);
} else if (!strncmp(buf, "rescan", count)) {
serio_disconnect_port(serio);
serio_find_driver(serio);
@@ -620,14 +626,30 @@ static void serio_destroy_port(struct serio *serio)
}
/*
+ * Reconnect serio port (re-initialize attached device).
+ * If reconnect fails (old device is no longer attached or
+ * there was no device to begin with) we do full rescan in
+ * hope of finding a driver for the port.
+ */
+static int serio_reconnect_port(struct serio *serio)
+{
+ int error = serio_reconnect_driver(serio);
+
+ if (error) {
+ serio_disconnect_port(serio);
+ serio_find_driver(serio);
+ }
+
+ return error;
+}
+
+/*
* Reconnect serio port and all its children (re-initialize attached devices)
*/
-static void serio_reconnect_port(struct serio *serio)
+static void serio_reconnect_chain(struct serio *serio)
{
do {
- if (serio_reconnect_driver(serio)) {
- serio_disconnect_port(serio);
- serio_find_driver(serio);
+ if (serio_reconnect_port(serio)) {
/* Ok, old children are now gone, we are done */
break;
}
@@ -673,7 +695,7 @@ void serio_rescan(struct serio *serio)
void serio_reconnect(struct serio *serio)
{
- serio_queue_event(serio, NULL, SERIO_RECONNECT_PORT);
+ serio_queue_event(serio, NULL, SERIO_RECONNECT_CHAIN);
}
/*
@@ -927,19 +949,16 @@ static int serio_suspend(struct device *dev, pm_message_t state)
static int serio_resume(struct device *dev)
{
- struct serio *serio = to_serio_port(dev);
-
- if (dev->power.power_state.event != PM_EVENT_ON &&
- serio_reconnect_driver(serio)) {
- /*
- * Driver re-probing can take a while, so better let kseriod
- * deal with it.
- */
- serio_rescan(serio);
+ /*
+ * Driver reconnect can take a while, so better let kseriod
+ * deal with it.
+ */
+ if (dev->power.power_state.event != PM_EVENT_ON) {
+ dev->power.power_state = PMSG_ON;
+ serio_queue_event(to_serio_port(dev), NULL,
+ SERIO_RECONNECT_PORT);
}
- dev->power.power_state = PMSG_ON;
-
return 0;
}
#endif /* CONFIG_PM */
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index e57366521572..6e60a97a234c 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -205,6 +205,18 @@ config TOUCHSCREEN_TOUCHWIN
To compile this driver as a module, choose M here: the
module will be called touchwin.
+config TOUCHSCREEN_ATMEL_TSADCC
+ tristate "Atmel Touchscreen Interface"
+ depends on ARCH_AT91SAM9RL
+ help
+ Say Y here if you have a 4-wire touchscreen connected to the
+ ADC Controller on your Atmel SoC (such as the AT91SAM9RL).
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called atmel_tsadcc.
+
config TOUCHSCREEN_UCB1400
tristate "Philips UCB1400 touchscreen"
select AC97_BUS
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index 39a804cd80f1..15cf29079489 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -7,6 +7,7 @@
wm97xx-ts-y := wm97xx-core.o
obj-$(CONFIG_TOUCHSCREEN_ADS7846) += ads7846.o
+obj-$(CONFIG_TOUCHSCREEN_ATMEL_TSADCC) += atmel_tsadcc.o
obj-$(CONFIG_TOUCHSCREEN_BITSY) += h3600_ts_input.o
obj-$(CONFIG_TOUCHSCREEN_CORGI) += corgi_ts.o
obj-$(CONFIG_TOUCHSCREEN_GUNZE) += gunze.o
diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
index 907a45fe9d40..ce6f48c695f5 100644
--- a/drivers/input/touchscreen/ads7846.c
+++ b/drivers/input/touchscreen/ads7846.c
@@ -517,7 +517,9 @@ static void ads7846_rx(void *ads)
if (x == MAX_12BIT)
x = 0;
- if (likely(x && z1)) {
+ if (ts->model == 7843) {
+ Rt = ts->pressure_max / 2;
+ } else if (likely(x && z1)) {
/* compute touch pressure resistance using equation #2 */
Rt = z2;
Rt -= z1;
@@ -525,11 +527,9 @@ static void ads7846_rx(void *ads)
Rt *= ts->x_plate_ohms;
Rt /= z1;
Rt = (Rt + 2047) >> 12;
- } else
+ } else {
Rt = 0;
-
- if (ts->model == 7843)
- Rt = ts->pressure_max / 2;
+ }
/* Sample found inconsistent by debouncing or pressure is beyond
* the maximum. Don't report it to user space, repeat at least
@@ -633,19 +633,17 @@ static void ads7846_rx_val(void *ads)
struct ads7846 *ts = ads;
struct spi_message *m;
struct spi_transfer *t;
- u16 *rx_val;
int val;
int action;
int status;
m = &ts->msg[ts->msg_idx];
t = list_entry(m->transfers.prev, struct spi_transfer, transfer_list);
- rx_val = t->rx_buf;
/* adjust: on-wire is a must-ignore bit, a BE12 value, then padding;
* built from two 8 bit values written msb-first.
*/
- val = be16_to_cpu(*rx_val) >> 3;
+ val = be16_to_cpup((__be16 *)t->rx_buf) >> 3;
action = ts->filter(ts->filter_data, ts->msg_idx, &val);
switch (action) {
@@ -659,7 +657,7 @@ static void ads7846_rx_val(void *ads)
m = ts->last_msg;
break;
case ADS7846_FILTER_OK:
- *rx_val = val;
+ *(u16 *)t->rx_buf = val;
ts->tc.ignore = 0;
m = &ts->msg[++ts->msg_idx];
break;
diff --git a/drivers/input/touchscreen/atmel_tsadcc.c b/drivers/input/touchscreen/atmel_tsadcc.c
new file mode 100644
index 000000000000..eee126b19e8b
--- /dev/null
+++ b/drivers/input/touchscreen/atmel_tsadcc.c
@@ -0,0 +1,332 @@
+/*
+ * Atmel Touch Screen Driver
+ *
+ * Copyright (c) 2008 ATMEL
+ * Copyright (c) 2008 Dan Liang
+ * Copyright (c) 2008 TimeSys Corporation
+ * Copyright (c) 2008 Justin Waters
+ *
+ * Based on touchscreen code from Atmel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/input.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+/* Register definitions based on AT91SAM9RL64 preliminary draft datasheet */
+
+#define ATMEL_TSADCC_CR 0x00 /* Control register */
+#define ATMEL_TSADCC_SWRST (1 << 0) /* Software Reset*/
+#define ATMEL_TSADCC_START (1 << 1) /* Start conversion */
+
+#define ATMEL_TSADCC_MR 0x04 /* Mode register */
+#define ATMEL_TSADCC_TSAMOD (3 << 0) /* ADC mode */
+#define ATMEL_TSADCC_TSAMOD_ADC_ONLY_MODE (0x0) /* ADC Mode */
+#define ATMEL_TSADCC_TSAMOD_TS_ONLY_MODE (0x1) /* Touch Screen Only Mode */
+#define ATMEL_TSADCC_LOWRES (1 << 4) /* Resolution selection */
+#define ATMEL_TSADCC_SLEEP (1 << 5) /* Sleep mode */
+#define ATMEL_TSADCC_PENDET (1 << 6) /* Pen Detect selection */
+#define ATMEL_TSADCC_PRESCAL (0x3f << 8) /* Prescalar Rate Selection */
+#define ATMEL_TSADCC_STARTUP (0x7f << 16) /* Start Up time */
+#define ATMEL_TSADCC_SHTIM (0xf << 24) /* Sample & Hold time */
+#define ATMEL_TSADCC_PENDBC (0xf << 28) /* Pen Detect debouncing time */
+
+#define ATMEL_TSADCC_TRGR 0x08 /* Trigger register */
+#define ATMEL_TSADCC_TRGMOD (7 << 0) /* Trigger mode */
+#define ATMEL_TSADCC_TRGMOD_NONE (0 << 0)
+#define ATMEL_TSADCC_TRGMOD_EXT_RISING (1 << 0)
+#define ATMEL_TSADCC_TRGMOD_EXT_FALLING (2 << 0)
+#define ATMEL_TSADCC_TRGMOD_EXT_ANY (3 << 0)
+#define ATMEL_TSADCC_TRGMOD_PENDET (4 << 0)
+#define ATMEL_TSADCC_TRGMOD_PERIOD (5 << 0)
+#define ATMEL_TSADCC_TRGMOD_CONTINUOUS (6 << 0)
+#define ATMEL_TSADCC_TRGPER (0xffff << 16) /* Trigger period */
+
+#define ATMEL_TSADCC_TSR 0x0C /* Touch Screen register */
+#define ATMEL_TSADCC_TSFREQ (0xf << 0) /* TS Frequency in Interleaved mode */
+#define ATMEL_TSADCC_TSSHTIM (0xf << 24) /* Sample & Hold time */
+
+#define ATMEL_TSADCC_CHER 0x10 /* Channel Enable register */
+#define ATMEL_TSADCC_CHDR 0x14 /* Channel Disable register */
+#define ATMEL_TSADCC_CHSR 0x18 /* Channel Status register */
+#define ATMEL_TSADCC_CH(n) (1 << (n)) /* Channel number */
+
+#define ATMEL_TSADCC_SR 0x1C /* Status register */
+#define ATMEL_TSADCC_EOC(n) (1 << ((n)+0)) /* End of conversion for channel N */
+#define ATMEL_TSADCC_OVRE(n) (1 << ((n)+8)) /* Overrun error for channel N */
+#define ATMEL_TSADCC_DRDY (1 << 16) /* Data Ready */
+#define ATMEL_TSADCC_GOVRE (1 << 17) /* General Overrun Error */
+#define ATMEL_TSADCC_ENDRX (1 << 18) /* End of RX Buffer */
+#define ATMEL_TSADCC_RXBUFF (1 << 19) /* TX Buffer full */
+#define ATMEL_TSADCC_PENCNT (1 << 20) /* Pen contact */
+#define ATMEL_TSADCC_NOCNT (1 << 21) /* No contact */
+
+#define ATMEL_TSADCC_LCDR 0x20 /* Last Converted Data register */
+#define ATMEL_TSADCC_DATA (0x3ff << 0) /* Channel data */
+
+#define ATMEL_TSADCC_IER 0x24 /* Interrupt Enable register */
+#define ATMEL_TSADCC_IDR 0x28 /* Interrupt Disable register */
+#define ATMEL_TSADCC_IMR 0x2C /* Interrupt Mask register */
+#define ATMEL_TSADCC_CDR0 0x30 /* Channel Data 0 */
+#define ATMEL_TSADCC_CDR1 0x34 /* Channel Data 1 */
+#define ATMEL_TSADCC_CDR2 0x38 /* Channel Data 2 */
+#define ATMEL_TSADCC_CDR3 0x3C /* Channel Data 3 */
+#define ATMEL_TSADCC_CDR4 0x40 /* Channel Data 4 */
+#define ATMEL_TSADCC_CDR5 0x44 /* Channel Data 5 */
+
+#define ADC_CLOCK 1000000
+
+struct atmel_tsadcc {
+ struct input_dev *input;
+ char phys[32];
+ struct clk *clk;
+ int irq;
+};
+
+static void __iomem *tsc_base;
+
+#define atmel_tsadcc_read(reg) __raw_readl(tsc_base + (reg))
+#define atmel_tsadcc_write(reg, val) __raw_writel((val), tsc_base + (reg))
+
+static irqreturn_t atmel_tsadcc_interrupt(int irq, void *dev)
+{
+ struct input_dev *input_dev = ((struct atmel_tsadcc *)dev)->input;
+
+ unsigned int absx;
+ unsigned int absy;
+ unsigned int status;
+ unsigned int reg;
+
+ status = atmel_tsadcc_read(ATMEL_TSADCC_SR);
+ status &= atmel_tsadcc_read(ATMEL_TSADCC_IMR);
+
+ if (status & ATMEL_TSADCC_NOCNT) {
+ /* Contact lost */
+ reg = atmel_tsadcc_read(ATMEL_TSADCC_MR) | ATMEL_TSADCC_PENDBC;
+
+ atmel_tsadcc_write(ATMEL_TSADCC_MR, reg);
+ atmel_tsadcc_write(ATMEL_TSADCC_TRGR, ATMEL_TSADCC_TRGMOD_NONE);
+ atmel_tsadcc_write(ATMEL_TSADCC_IDR,
+ ATMEL_TSADCC_EOC(3) | ATMEL_TSADCC_NOCNT);
+ atmel_tsadcc_write(ATMEL_TSADCC_IER, ATMEL_TSADCC_PENCNT);
+
+ input_report_key(input_dev, BTN_TOUCH, 0);
+ input_sync(input_dev);
+
+ } else if (status & ATMEL_TSADCC_PENCNT) {
+ /* Pen detected */
+ reg = atmel_tsadcc_read(ATMEL_TSADCC_MR);
+ reg &= ~ATMEL_TSADCC_PENDBC;
+
+ atmel_tsadcc_write(ATMEL_TSADCC_IDR, ATMEL_TSADCC_PENCNT);
+ atmel_tsadcc_write(ATMEL_TSADCC_MR, reg);
+ atmel_tsadcc_write(ATMEL_TSADCC_IER,
+ ATMEL_TSADCC_EOC(3) | ATMEL_TSADCC_NOCNT);
+ atmel_tsadcc_write(ATMEL_TSADCC_TRGR,
+ ATMEL_TSADCC_TRGMOD_PERIOD | (0x0FFF << 16));
+
+ } else if (status & ATMEL_TSADCC_EOC(3)) {
+ /* Conversion finished */
+
+ absx = atmel_tsadcc_read(ATMEL_TSADCC_CDR3) << 10;
+ absx /= atmel_tsadcc_read(ATMEL_TSADCC_CDR2);
+
+ absy = atmel_tsadcc_read(ATMEL_TSADCC_CDR1) << 10;
+ absy /= atmel_tsadcc_read(ATMEL_TSADCC_CDR0);
+
+ input_report_abs(input_dev, ABS_X, absx);
+ input_report_abs(input_dev, ABS_Y, absy);
+ input_report_key(input_dev, BTN_TOUCH, 1);
+ input_sync(input_dev);
+ }
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * The functions for inserting/removing us as a module.
+ */
+
+static int __devinit atmel_tsadcc_probe(struct platform_device *pdev)
+{
+ struct atmel_tsadcc *ts_dev;
+ struct input_dev *input_dev;
+ struct resource *res;
+ int err = 0;
+ unsigned int prsc;
+ unsigned int reg;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "no mmio resource defined.\n");
+ return -ENXIO;
+ }
+
+ /* Allocate memory for device */
+ ts_dev = kzalloc(sizeof(struct atmel_tsadcc), GFP_KERNEL);
+ if (!ts_dev) {
+ dev_err(&pdev->dev, "failed to allocate memory.\n");
+ return -ENOMEM;
+ }
+ platform_set_drvdata(pdev, ts_dev);
+
+ input_dev = input_allocate_device();
+ if (!input_dev) {
+ dev_err(&pdev->dev, "failed to allocate input device.\n");
+ err = -EBUSY;
+ goto err_free_mem;
+ }
+
+ ts_dev->irq = platform_get_irq(pdev, 0);
+ if (ts_dev->irq < 0) {
+ dev_err(&pdev->dev, "no irq ID is designated.\n");
+ err = -ENODEV;
+ goto err_free_dev;
+ }
+
+ if (!request_mem_region(res->start, res->end - res->start + 1,
+ "atmel tsadcc regs")) {
+ dev_err(&pdev->dev, "resources is unavailable.\n");
+ err = -EBUSY;
+ goto err_free_dev;
+ }
+
+ tsc_base = ioremap(res->start, res->end - res->start + 1);
+ if (!tsc_base) {
+ dev_err(&pdev->dev, "failed to map registers.\n");
+ err = -ENOMEM;
+ goto err_release_mem;
+ }
+
+ err = request_irq(ts_dev->irq, atmel_tsadcc_interrupt, IRQF_DISABLED,
+ pdev->dev.driver->name, ts_dev);
+ if (err) {
+ dev_err(&pdev->dev, "failed to allocate irq.\n");
+ goto err_unmap_regs;
+ }
+
+ ts_dev->clk = clk_get(&pdev->dev, "tsc_clk");
+ if (IS_ERR(ts_dev->clk)) {
+ dev_err(&pdev->dev, "failed to get ts_clk\n");
+ err = PTR_ERR(ts_dev->clk);
+ goto err_free_irq;
+ }
+
+ ts_dev->input = input_dev;
+
+ snprintf(ts_dev->phys, sizeof(ts_dev->phys),
+ "%s/input0", pdev->dev.bus_id);
+
+ input_dev->name = "atmel touch screen controller";
+ input_dev->phys = ts_dev->phys;
+ input_dev->dev.parent = &pdev->dev;
+
+ input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+ input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+
+ input_set_abs_params(input_dev, ABS_X, 0, 0x3FF, 0, 0);
+ input_set_abs_params(input_dev, ABS_Y, 0, 0x3FF, 0, 0);
+
+ /* clk_enable() always returns 0, no need to check it */
+ clk_enable(ts_dev->clk);
+
+ prsc = clk_get_rate(ts_dev->clk);
+ dev_info(&pdev->dev, "Master clock is set at: %d Hz\n", prsc);
+
+ prsc = prsc / ADC_CLOCK / 2 - 1;
+
+ reg = ATMEL_TSADCC_TSAMOD_TS_ONLY_MODE |
+ ((0x00 << 5) & ATMEL_TSADCC_SLEEP) | /* Normal Mode */
+ ((0x01 << 6) & ATMEL_TSADCC_PENDET) | /* Enable Pen Detect */
+ ((prsc << 8) & ATMEL_TSADCC_PRESCAL) | /* PRESCAL */
+ ((0x13 << 16) & ATMEL_TSADCC_STARTUP) | /* STARTUP */
+ ((0x0F << 28) & ATMEL_TSADCC_PENDBC); /* PENDBC */
+
+ atmel_tsadcc_write(ATMEL_TSADCC_CR, ATMEL_TSADCC_SWRST);
+ atmel_tsadcc_write(ATMEL_TSADCC_MR, reg);
+ atmel_tsadcc_write(ATMEL_TSADCC_TRGR, ATMEL_TSADCC_TRGMOD_NONE);
+ atmel_tsadcc_write(ATMEL_TSADCC_TSR, (0x3 << 24) & ATMEL_TSADCC_TSSHTIM);
+
+ atmel_tsadcc_read(ATMEL_TSADCC_SR);
+ atmel_tsadcc_write(ATMEL_TSADCC_IER, ATMEL_TSADCC_PENCNT);
+
+ /* All went ok, so register to the input system */
+ err = input_register_device(input_dev);
+ if (err)
+ goto err_fail;
+
+ return 0;
+
+err_fail:
+ clk_disable(ts_dev->clk);
+ clk_put(ts_dev->clk);
+err_free_irq:
+ free_irq(ts_dev->irq, ts_dev);
+err_unmap_regs:
+ iounmap(tsc_base);
+err_release_mem:
+ release_mem_region(res->start, res->end - res->start + 1);
+err_free_dev:
+ input_free_device(ts_dev->input);
+err_free_mem:
+ kfree(ts_dev);
+ return err;
+}
+
+static int __devexit atmel_tsadcc_remove(struct platform_device *pdev)
+{
+ struct atmel_tsadcc *ts_dev = dev_get_drvdata(&pdev->dev);
+ struct resource *res;
+
+ free_irq(ts_dev->irq, ts_dev);
+
+ input_unregister_device(ts_dev->input);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ iounmap(tsc_base);
+ release_mem_region(res->start, res->end - res->start + 1);
+
+ clk_disable(ts_dev->clk);
+ clk_put(ts_dev->clk);
+
+ kfree(ts_dev);
+
+ return 0;
+}
+
+static struct platform_driver atmel_tsadcc_driver = {
+ .probe = atmel_tsadcc_probe,
+ .remove = __devexit_p(atmel_tsadcc_remove),
+ .driver = {
+ .name = "atmel_tsadcc",
+ },
+};
+
+static int __init atmel_tsadcc_init(void)
+{
+ return platform_driver_register(&atmel_tsadcc_driver);
+}
+
+static void __exit atmel_tsadcc_exit(void)
+{
+ platform_driver_unregister(&atmel_tsadcc_driver);
+}
+
+module_init(atmel_tsadcc_init);
+module_exit(atmel_tsadcc_exit);
+
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Atmel TouchScreen Driver");
+MODULE_AUTHOR("Dan Liang <dan.liang@atmel.com>");
+
diff --git a/include/linux/serio.h b/include/linux/serio.h
index e72716cca577..25641d9e0ea8 100644
--- a/include/linux/serio.h
+++ b/include/linux/serio.h
@@ -87,11 +87,10 @@ void serio_unregister_port(struct serio *serio);
void serio_unregister_child_port(struct serio *serio);
int __serio_register_driver(struct serio_driver *drv, struct module *owner, const char *mod_name);
-static inline int serio_register_driver(struct serio_driver *drv)
+static inline int __must_check serio_register_driver(struct serio_driver *drv)
{
return __serio_register_driver(drv, THIS_MODULE, KBUILD_MODNAME);
}
-int serio_register_driver(struct serio_driver *drv);
void serio_unregister_driver(struct serio_driver *drv);
static inline int serio_write(struct serio *serio, unsigned char data)
OpenPOWER on IntegriCloud