diff options
| -rw-r--r-- | drivers/char/drm/drm_bufs.c | 1 | ||||
| -rw-r--r-- | drivers/char/drm/i915_dma.c | 113 | ||||
| -rw-r--r-- | drivers/char/drm/i915_drv.c | 462 | ||||
| -rw-r--r-- | drivers/char/drm/i915_drv.h | 790 |
4 files changed, 1309 insertions, 57 deletions
diff --git a/drivers/char/drm/drm_bufs.c b/drivers/char/drm/drm_bufs.c index d65e75d405fa..07b774fa3f38 100644 --- a/drivers/char/drm/drm_bufs.c +++ b/drivers/char/drm/drm_bufs.c @@ -429,6 +429,7 @@ int drm_rmmap(struct drm_device *dev, drm_local_map_t *map) return ret; } +EXPORT_SYMBOL(drm_rmmap); /* The rmmap ioctl appears to be unnecessary. All mappings are torn down on * the last close of the device, and this is necessary for cleanup when things diff --git a/drivers/char/drm/i915_dma.c b/drivers/char/drm/i915_dma.c index 842db3233e9e..b8db9652e9dd 100644 --- a/drivers/char/drm/i915_dma.c +++ b/drivers/char/drm/i915_dma.c @@ -31,17 +31,6 @@ #include "i915_drm.h" #include "i915_drv.h" -#define IS_I965G(dev) (dev->pci_device == 0x2972 || \ - dev->pci_device == 0x2982 || \ - dev->pci_device == 0x2992 || \ - dev->pci_device == 0x29A2 || \ - dev->pci_device == 0x2A02 || \ - dev->pci_device == 0x2A12) - -#define IS_G33(dev) (dev->pci_device == 0x29b2 || \ - dev->pci_device == 0x29c2 || \ - dev->pci_device == 0x29d2) - /* Really want an OS-independent resettable timer. Would like to have * this loop run for (eg) 3 sec, but have the timer reset every time * the head pointer changes, so that EBUSY only happens if the ring @@ -90,6 +79,7 @@ void i915_kernel_lost_context(struct drm_device * dev) static int i915_dma_cleanup(struct drm_device * dev) { + drm_i915_private_t *dev_priv = dev->dev_private; /* Make sure interrupts are disabled here because the uninstall ioctl * may not have been called from userspace and after dev_private * is freed, it's too late. @@ -97,52 +87,42 @@ static int i915_dma_cleanup(struct drm_device * dev) if (dev->irq) drm_irq_uninstall(dev); - if (dev->dev_private) { - drm_i915_private_t *dev_priv = - (drm_i915_private_t *) dev->dev_private; - - if (dev_priv->ring.virtual_start) { - drm_core_ioremapfree(&dev_priv->ring.map, dev); - } - - if (dev_priv->status_page_dmah) { - drm_pci_free(dev, dev_priv->status_page_dmah); - /* Need to rewrite hardware status page */ - I915_WRITE(0x02080, 0x1ffff000); - } - - if (dev_priv->status_gfx_addr) { - dev_priv->status_gfx_addr = 0; - drm_core_ioremapfree(&dev_priv->hws_map, dev); - I915_WRITE(0x2080, 0x1ffff000); - } + if (dev_priv->ring.virtual_start) { + drm_core_ioremapfree(&dev_priv->ring.map, dev); + dev_priv->ring.virtual_start = 0; + dev_priv->ring.map.handle = 0; + dev_priv->ring.map.size = 0; + } - drm_free(dev->dev_private, sizeof(drm_i915_private_t), - DRM_MEM_DRIVER); + if (dev_priv->status_page_dmah) { + drm_pci_free(dev, dev_priv->status_page_dmah); + dev_priv->status_page_dmah = NULL; + /* Need to rewrite hardware status page */ + I915_WRITE(0x02080, 0x1ffff000); + } - dev->dev_private = NULL; + if (dev_priv->status_gfx_addr) { + dev_priv->status_gfx_addr = 0; + drm_core_ioremapfree(&dev_priv->hws_map, dev); + I915_WRITE(0x2080, 0x1ffff000); } return 0; } -static int i915_initialize(struct drm_device * dev, - drm_i915_private_t * dev_priv, - drm_i915_init_t * init) +static int i915_initialize(struct drm_device * dev, drm_i915_init_t * init) { - memset(dev_priv, 0, sizeof(drm_i915_private_t)); + drm_i915_private_t *dev_priv = dev->dev_private; dev_priv->sarea = drm_getsarea(dev); if (!dev_priv->sarea) { DRM_ERROR("can not find sarea!\n"); - dev->dev_private = (void *)dev_priv; i915_dma_cleanup(dev); return -EINVAL; } dev_priv->mmio_map = drm_core_findmap(dev, init->mmio_offset); if (!dev_priv->mmio_map) { - dev->dev_private = (void *)dev_priv; i915_dma_cleanup(dev); DRM_ERROR("can not find mmio map!\n"); return -EINVAL; @@ -165,7 +145,6 @@ static int i915_initialize(struct drm_device * dev, drm_core_ioremap(&dev_priv->ring.map, dev); if (dev_priv->ring.map.handle == NULL) { - dev->dev_private = (void *)dev_priv; i915_dma_cleanup(dev); DRM_ERROR("can not ioremap virtual address for" " ring buffer\n"); @@ -197,7 +176,6 @@ static int i915_initialize(struct drm_device * dev, drm_pci_alloc(dev, PAGE_SIZE, PAGE_SIZE, 0xffffffff); if (!dev_priv->status_page_dmah) { - dev->dev_private = (void *)dev_priv; i915_dma_cleanup(dev); DRM_ERROR("Can not allocate hardware status page\n"); return -ENOMEM; @@ -209,7 +187,6 @@ static int i915_initialize(struct drm_device * dev, I915_WRITE(0x02080, dev_priv->dma_status_page); } DRM_DEBUG("Enabled hardware status page\n"); - dev->dev_private = (void *)dev_priv; return 0; } @@ -254,17 +231,12 @@ static int i915_dma_resume(struct drm_device * dev) static int i915_dma_init(struct drm_device *dev, void *data, struct drm_file *file_priv) { - drm_i915_private_t *dev_priv; drm_i915_init_t *init = data; int retcode = 0; switch (init->func) { case I915_INIT_DMA: - dev_priv = drm_alloc(sizeof(drm_i915_private_t), - DRM_MEM_DRIVER); - if (dev_priv == NULL) - return -ENOMEM; - retcode = i915_initialize(dev, dev_priv, init); + retcode = i915_initialize(dev, init); break; case I915_CLEANUP_DMA: retcode = i915_dma_cleanup(dev); @@ -765,7 +737,6 @@ static int i915_set_status_page(struct drm_device *dev, void *data, drm_core_ioremap(&dev_priv->hws_map, dev); if (dev_priv->hws_map.handle == NULL) { - dev->dev_private = (void *)dev_priv; i915_dma_cleanup(dev); dev_priv->status_gfx_addr = 0; DRM_ERROR("can not ioremap virtual address for" @@ -784,6 +755,10 @@ static int i915_set_status_page(struct drm_device *dev, void *data, int i915_driver_load(struct drm_device *dev, unsigned long flags) { + struct drm_i915_private *dev_priv = dev->dev_private; + unsigned long base, size; + int ret = 0, mmio_bar = IS_I9XX(dev) ? 0 : 1; + /* i915 has 4 more counters */ dev->counters += 4; dev->types[6] = _DRM_STAT_IRQ; @@ -791,24 +766,50 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags) dev->types[8] = _DRM_STAT_SECONDARY; dev->types[9] = _DRM_STAT_DMA; + dev_priv = drm_alloc(sizeof(drm_i915_private_t), DRM_MEM_DRIVER); + if (dev_priv == NULL) + return -ENOMEM; + + memset(dev_priv, 0, sizeof(drm_i915_private_t)); + + dev->dev_private = (void *)dev_priv; + + /* Add register map (needed for suspend/resume) */ + base = drm_get_resource_start(dev, mmio_bar); + size = drm_get_resource_len(dev, mmio_bar); + + ret = drm_addmap(dev, base, size, _DRM_REGISTERS, _DRM_KERNEL, + &dev_priv->mmio_map); + return ret; +} + +int i915_driver_unload(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + + if (dev_priv->mmio_map) + drm_rmmap(dev, dev_priv->mmio_map); + + drm_free(dev->dev_private, sizeof(drm_i915_private_t), + DRM_MEM_DRIVER); + return 0; } void i915_driver_lastclose(struct drm_device * dev) { - if (dev->dev_private) { - drm_i915_private_t *dev_priv = dev->dev_private; + drm_i915_private_t *dev_priv = dev->dev_private; + + if (dev_priv->agp_heap) i915_mem_takedown(&(dev_priv->agp_heap)); - } + i915_dma_cleanup(dev); } void i915_driver_preclose(struct drm_device * dev, struct drm_file *file_priv) { - if (dev->dev_private) { - drm_i915_private_t *dev_priv = dev->dev_private; - i915_mem_release(dev, file_priv, dev_priv->agp_heap); - } + drm_i915_private_t *dev_priv = dev->dev_private; + i915_mem_release(dev, file_priv, dev_priv->agp_heap); } struct drm_ioctl_desc i915_ioctls[] = { diff --git a/drivers/char/drm/i915_drv.c b/drivers/char/drm/i915_drv.c index 63b667538e08..d745f3fd6fbf 100644 --- a/drivers/char/drm/i915_drv.c +++ b/drivers/char/drm/i915_drv.c @@ -38,6 +38,465 @@ static struct pci_device_id pciidlist[] = { i915_PCI_IDS }; +enum pipe { + PIPE_A = 0, + PIPE_B, +}; + +static bool i915_pipe_enabled(struct drm_device *dev, enum pipe pipe) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + + if (pipe == PIPE_A) + return (I915_READ(DPLL_A) & DPLL_VCO_ENABLE); + else + return (I915_READ(DPLL_B) & DPLL_VCO_ENABLE); +} + +static void i915_save_palette(struct drm_device *dev, enum pipe pipe) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + unsigned long reg = (pipe == PIPE_A ? PALETTE_A : PALETTE_B); + u32 *array; + int i; + + if (!i915_pipe_enabled(dev, pipe)) + return; + + if (pipe == PIPE_A) + array = dev_priv->save_palette_a; + else + array = dev_priv->save_palette_b; + + for(i = 0; i < 256; i++) + array[i] = I915_READ(reg + (i << 2)); +} + +static void i915_restore_palette(struct drm_device *dev, enum pipe pipe) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + unsigned long reg = (pipe == PIPE_A ? PALETTE_A : PALETTE_B); + u32 *array; + int i; + + if (!i915_pipe_enabled(dev, pipe)) + return; + + if (pipe == PIPE_A) + array = dev_priv->save_palette_a; + else + array = dev_priv->save_palette_b; + + for(i = 0; i < 256; i++) + I915_WRITE(reg + (i << 2), array[i]); +} + +static u8 i915_read_indexed(u16 index_port, u16 data_port, u8 reg) +{ + outb(reg, index_port); + return inb(data_port); +} + +static u8 i915_read_ar(u16 st01, u8 reg, u16 palette_enable) +{ + inb(st01); + outb(palette_enable | reg, VGA_AR_INDEX); + return inb(VGA_AR_DATA_READ); +} + +static void i915_write_ar(u8 st01, u8 reg, u8 val, u16 palette_enable) +{ + inb(st01); + outb(palette_enable | reg, VGA_AR_INDEX); + outb(val, VGA_AR_DATA_WRITE); +} + +static void i915_write_indexed(u16 index_port, u16 data_port, u8 reg, u8 val) +{ + outb(reg, index_port); + outb(val, data_port); +} + +static void i915_save_vga(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + int i; + u16 cr_index, cr_data, st01; + + /* VGA color palette registers */ + dev_priv->saveDACMASK = inb(VGA_DACMASK); + /* DACCRX automatically increments during read */ + outb(0, VGA_DACRX); + /* Read 3 bytes of color data from each index */ + for (i = 0; i < 256 * 3; i++) + dev_priv->saveDACDATA[i] = inb(VGA_DACDATA); + + /* MSR bits */ + dev_priv->saveMSR = inb(VGA_MSR_READ); + if (dev_priv->saveMSR & VGA_MSR_CGA_MODE) { + cr_index = VGA_CR_INDEX_CGA; + cr_data = VGA_CR_DATA_CGA; + st01 = VGA_ST01_CGA; + } else { + cr_index = VGA_CR_INDEX_MDA; + cr_data = VGA_CR_DATA_MDA; + st01 = VGA_ST01_MDA; + } + + /* CRT controller regs */ + i915_write_indexed(cr_index, cr_data, 0x11, + i915_read_indexed(cr_index, cr_data, 0x11) & + (~0x80)); + for (i = 0; i < 0x24; i++) + dev_priv->saveCR[i] = + i915_read_indexed(cr_index, cr_data, i); + /* Make sure we don't turn off CR group 0 writes */ + dev_priv->saveCR[0x11] &= ~0x80; + + /* Attribute controller registers */ + inb(st01); + dev_priv->saveAR_INDEX = inb(VGA_AR_INDEX); + for (i = 0; i < 20; i++) + dev_priv->saveAR[i] = i915_read_ar(st01, i, 0); + inb(st01); + outb(dev_priv->saveAR_INDEX, VGA_AR_INDEX); + + /* Graphics controller registers */ + for (i = 0; i < 9; i++) + dev_priv->saveGR[i] = + i915_read_indexed(VGA_GR_INDEX, VGA_GR_DATA, i); + + dev_priv->saveGR[0x10] = + i915_read_indexed(VGA_GR_INDEX, VGA_GR_DATA, 0x10); + dev_priv->saveGR[0x11] = + i915_read_indexed(VGA_GR_INDEX, VGA_GR_DATA, 0x11); + dev_priv->saveGR[0x18] = + i915_read_indexed(VGA_GR_INDEX, VGA_GR_DATA, 0x18); + + /* Sequencer registers */ + for (i = 0; i < 8; i++) + dev_priv->saveSR[i] = + i915_read_indexed(VGA_SR_INDEX, VGA_SR_DATA, i); +} + +static void i915_restore_vga(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + int i; + u16 cr_index, cr_data, st01; + + /* MSR bits */ + outb(dev_priv->saveMSR, VGA_MSR_WRITE); + if (dev_priv->saveMSR & VGA_MSR_CGA_MODE) { + cr_index = VGA_CR_INDEX_CGA; + cr_data = VGA_CR_DATA_CGA; + st01 = VGA_ST01_CGA; + } else { + cr_index = VGA_CR_INDEX_MDA; + cr_data = VGA_CR_DATA_MDA; + st01 = VGA_ST01_MDA; + } + + /* Sequencer registers, don't write SR07 */ + for (i = 0; i < 7; i++) + i915_write_indexed(VGA_SR_INDEX, VGA_SR_DATA, i, + dev_priv->saveSR[i]); + + /* CRT controller regs */ + /* Enable CR group 0 writes */ + i915_write_indexed(cr_index, cr_data, 0x11, dev_priv->saveCR[0x11]); + for (i = 0; i < 0x24; i++) + i915_write_indexed(cr_index, cr_data, i, dev_priv->saveCR[i]); + + /* Graphics controller regs */ + for (i = 0; i < 9; i++) + i915_write_indexed(VGA_GR_INDEX, VGA_GR_DATA, i, + dev_priv->saveGR[i]); + + i915_write_indexed(VGA_GR_INDEX, VGA_GR_DATA, 0x10, + dev_priv->saveGR[0x10]); + i915_write_indexed(VGA_GR_INDEX, VGA_GR_DATA, 0x11, + dev_priv->saveGR[0x11]); + i915_write_indexed(VGA_GR_INDEX, VGA_GR_DATA, 0x18, + dev_priv->saveGR[0x18]); + + /* Attribute controller registers */ + for (i = 0; i < 20; i++) + i915_write_ar(st01, i, dev_priv->saveAR[i], 0); + inb(st01); /* switch back to index mode */ + outb(dev_priv->saveAR_INDEX | 0x20, VGA_AR_INDEX); + + /* VGA color palette registers */ + outb(dev_priv->saveDACMASK, VGA_DACMASK); + /* DACCRX automatically increments during read */ + outb(0, VGA_DACWX); + /* Read 3 bytes of color data from each index */ + for (i = 0; i < 256 * 3; i++) + outb(dev_priv->saveDACDATA[i], VGA_DACDATA); + +} + +static int i915_suspend(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + int i; + + if (!dev || !dev_priv) { + printk(KERN_ERR "dev: %p, dev_priv: %p\n", dev, dev_priv); + printk(KERN_ERR "DRM not initialized, aborting suspend.\n"); + return -ENODEV; + } + + pci_save_state(dev->pdev); + pci_read_config_byte(dev->pdev, LBB, &dev_priv->saveLBB); + + /* Pipe & plane A info */ + dev_priv->savePIPEACONF = I915_READ(PIPEACONF); + dev_priv->savePIPEASRC = I915_READ(PIPEASRC); + dev_priv->saveFPA0 = I915_READ(FPA0); + dev_priv->saveFPA1 = I915_READ(FPA1); + dev_priv->saveDPLL_A = I915_READ(DPLL_A); + if (IS_I965G(dev)) + dev_priv->saveDPLL_A_MD = I915_READ(DPLL_A_MD); + dev_priv->saveHTOTAL_A = I915_READ(HTOTAL_A); + dev_priv->saveHBLANK_A = I915_READ(HBLANK_A); + dev_priv->saveHSYNC_A = I915_READ(HSYNC_A); + dev_priv->saveVTOTAL_A = I915_READ(VTOTAL_A); + dev_priv->saveVBLANK_A = I915_READ(VBLANK_A); + dev_priv->saveVSYNC_A = I915_READ(VSYNC_A); + dev_priv->saveBCLRPAT_A = I915_READ(BCLRPAT_A); + + dev_priv->saveDSPACNTR = I915_READ(DSPACNTR); + dev_priv->saveDSPASTRIDE = I915_READ(DSPASTRIDE); + dev_priv->saveDSPASIZE = I915_READ(DSPASIZE); + dev_priv->saveDSPAPOS = I915_READ(DSPAPOS); + dev_priv->saveDSPABASE = I915_READ(DSPABASE); + if (IS_I965G(dev)) { + dev_priv->saveDSPASURF = I915_READ(DSPASURF); + dev_priv->saveDSPATILEOFF = I915_READ(DSPATILEOFF); + } + i915_save_palette(dev, PIPE_A); + + /* Pipe & plane B info */ + dev_priv->savePIPEBCONF = I915_READ(PIPEBCONF); + dev_priv->savePIPEBSRC = I915_READ(PIPEBSRC); + dev_priv->saveFPB0 = I915_READ(FPB0); + dev_priv->saveFPB1 = I915_READ(FPB1); + dev_priv->saveDPLL_B = I915_READ(DPLL_B); + if (IS_I965G(dev)) + dev_priv->saveDPLL_B_MD = I915_READ(DPLL_B_MD); + dev_priv->saveHTOTAL_B = I915_READ(HTOTAL_B); + dev_priv->saveHBLANK_B = I915_READ(HBLANK_B); + dev_priv->saveHSYNC_B = I915_READ(HSYNC_B); + dev_priv->saveVTOTAL_B = I915_READ(VTOTAL_B); + dev_priv->saveVBLANK_B = I915_READ(VBLANK_B); + dev_priv->saveVSYNC_B = I915_READ(VSYNC_B); + dev_priv->saveBCLRPAT_A = I915_READ(BCLRPAT_A); + + dev_priv->saveDSPBCNTR = I915_READ(DSPBCNTR); + dev_priv->saveDSPBSTRIDE = I915_READ(DSPBSTRIDE); + dev_priv->saveDSPBSIZE = I915_READ(DSPBSIZE); + dev_priv->saveDSPBPOS = I915_READ(DSPBPOS); + dev_priv->saveDSPBBASE = I915_READ(DSPBBASE); + if (IS_I965GM(dev)) { + dev_priv->saveDSPBSURF = I915_READ(DSPBSURF); + dev_priv->saveDSPBTILEOFF = I915_READ(DSPBTILEOFF); + } + i915_save_palette(dev, PIPE_B); + + /* CRT state */ + dev_priv->saveADPA = I915_READ(ADPA); + + /* LVDS state */ + dev_priv->savePP_CONTROL = I915_READ(PP_CONTROL); + dev_priv->savePFIT_PGM_RATIOS = I915_READ(PFIT_PGM_RATIOS); + dev_priv->saveBLC_PWM_CTL = I915_READ(BLC_PWM_CTL); + if (IS_I965G(dev)) + dev_priv->saveBLC_PWM_CTL2 = I915_READ(BLC_PWM_CTL2); + if (IS_MOBILE(dev) && !IS_I830(dev)) + dev_priv->saveLVDS = I915_READ(LVDS); + if (!IS_I830(dev) && !IS_845G(dev)) + dev_priv->savePFIT_CONTROL = I915_READ(PFIT_CONTROL); + dev_priv->saveLVDSPP_ON = I915_READ(LVDSPP_ON); + dev_priv->saveLVDSPP_OFF = I915_READ(LVDSPP_OFF); + dev_priv->savePP_CYCLE = I915_READ(PP_CYCLE); + + /* FIXME: save TV & SDVO state */ + + /* FBC state */ + dev_priv->saveFBC_CFB_BASE = I915_READ(FBC_CFB_BASE); + dev_priv->saveFBC_LL_BASE = I915_READ(FBC_LL_BASE); + dev_priv->saveFBC_CONTROL2 = I915_READ(FBC_CONTROL2); + dev_priv->saveFBC_CONTROL = I915_READ(FBC_CONTROL); + + /* VGA state */ + dev_priv->saveVCLK_DIVISOR_VGA0 = I915_READ(VCLK_DIVISOR_VGA0); + dev_priv->saveVCLK_DIVISOR_VGA1 = I915_READ(VCLK_DIVISOR_VGA1); + dev_priv->saveVCLK_POST_DIV = I915_READ(VCLK_POST_DIV); + dev_priv->saveVGACNTRL = I915_READ(VGACNTRL); + + /* Scratch space */ + for (i = 0; i < 16; i++) { + dev_priv->saveSWF0[i] = I915_READ(SWF0 + (i << 2)); + dev_priv->saveSWF1[i] = I915_READ(SWF10 + (i << 2)); + } + for (i = 0; i < 3; i++) + dev_priv->saveSWF2[i] = I915_READ(SWF30 + (i << 2)); + + i915_save_vga(dev); + + /* Shut down the device */ + pci_disable_device(dev->pdev); + pci_set_power_state(dev->pdev, PCI_D3hot); + + return 0; +} + +static int i915_resume(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + int i; + + pci_set_power_state(dev->pdev, PCI_D0); + pci_restore_state(dev->pdev); + if (pci_enable_device(dev->pdev)) + return -1; + + pci_write_config_byte(dev->pdev, LBB, dev_priv->saveLBB); + + /* Pipe & plane A info */ + /* Prime the clock */ + if (dev_priv->saveDPLL_A & DPLL_VCO_ENABLE) { + I915_WRITE(DPLL_A, dev_priv->saveDPLL_A & + ~DPLL_VCO_ENABLE); + udelay(150); + } + I915_WRITE(FPA0, dev_priv->saveFPA0); + I915_WRITE(FPA1, dev_priv->saveFPA1); + /* Actually enable it */ + I915_WRITE(DPLL_A, dev_priv->saveDPLL_A); + udelay(150); + if (IS_I965G(dev)) + I915_WRITE(DPLL_A_MD, dev_priv->saveDPLL_A_MD); + udelay(150); + + /* Restore mode */ + I915_WRITE(HTOTAL_A, dev_priv->saveHTOTAL_A); + I915_WRITE(HBLANK_A, dev_priv->saveHBLANK_A); + I915_WRITE(HSYNC_A, dev_priv->saveHSYNC_A); + I915_WRITE(VTOTAL_A, dev_priv->saveVTOTAL_A); + I915_WRITE(VBLANK_A, dev_priv->saveVBLANK_A); + I915_WRITE(VSYNC_A, dev_priv->saveVSYNC_A); + I915_WRITE(BCLRPAT_A, dev_priv->saveBCLRPAT_A); + + /* Restore plane info */ + I915_WRITE(DSPASIZE, dev_priv->saveDSPASIZE); + I915_WRITE(DSPAPOS, dev_priv->saveDSPAPOS); + I915_WRITE(PIPEASRC, dev_priv->savePIPEASRC); + I915_WRITE(DSPABASE, dev_priv->saveDSPABASE); + I915_WRITE(DSPASTRIDE, dev_priv->saveDSPASTRIDE); + if (IS_I965G(dev)) { + I915_WRITE(DSPASURF, dev_priv->saveDSPASURF); + I915_WRITE(DSPATILEOFF, dev_priv->saveDSPATILEOFF); + } + + if ((dev_priv->saveDPLL_A & DPLL_VCO_ENABLE) && + (dev_priv->saveDPLL_A & DPLL_VGA_MODE_DIS)) + I915_WRITE(PIPEACONF, dev_priv->savePIPEACONF); + + i915_restore_palette(dev, PIPE_A); + /* Enable the plane */ + I915_WRITE(DSPACNTR, dev_priv->saveDSPACNTR); + I915_WRITE(DSPABASE, I915_READ(DSPABASE)); + + /* Pipe & plane B info */ + if (dev_priv->saveDPLL_B & DPLL_VCO_ENABLE) { + I915_WRITE(DPLL_B, dev_priv->saveDPLL_B & + ~DPLL_VCO_ENABLE); + udelay(150); + } + I915_WRITE(FPB0, dev_priv->saveFPB0); + I915_WRITE(FPB1, dev_priv->saveFPB1); + /* Actually enable it */ + I915_WRITE(DPLL_B, dev_priv->saveDPLL_B); + udelay(150); + if (IS_I965G(dev)) + I915_WRITE(DPLL_B_MD, dev_priv->saveDPLL_B_MD); + udelay(150); + + /* Restore mode */ + I915_WRITE(HTOTAL_B, dev_priv->saveHTOTAL_B); + I915_WRITE(HBLANK_B, dev_priv->saveHBLANK_B); + I915_WRITE(HSYNC_B, dev_priv->saveHSYNC_B); + I915_WRITE(VTOTAL_B, dev_priv->saveVTOTAL_B); + I915_WRITE(VBLANK_B, dev_priv->saveVBLANK_B); + I915_WRITE(VSYNC_B, dev_priv->saveVSYNC_B); + I915_WRITE(BCLRPAT_B, dev_priv->saveBCLRPAT_B); + + /* Restore plane info */ + I915_WRITE(DSPBSIZE, dev_priv->saveDSPBSIZE); + I915_WRITE(DSPBPOS, dev_priv->saveDSPBPOS); + I915_WRITE(PIPEBSRC, dev_priv->savePIPEBSRC); + I915_WRITE(DSPBBASE, dev_priv->saveDSPBBASE); + I915_WRITE(DSPBSTRIDE, dev_priv->saveDSPBSTRIDE); + if (IS_I965G(dev)) { + I915_WRITE(DSPBSURF, dev_priv->saveDSPBSURF); + I915_WRITE(DSPBTILEOFF, dev_priv->saveDSPBTILEOFF); + } + + if ((dev_priv->saveDPLL_B & DPLL_VCO_ENABLE) && + (dev_priv->saveDPLL_B & DPLL_VGA_MODE_DIS)) + I915_WRITE(PIPEBCONF, dev_priv->savePIPEBCONF); + i915_restore_palette(dev, PIPE_A); + /* Enable the plane */ + I915_WRITE(DSPBCNTR, dev_priv->saveDSPBCNTR); + I915_WRITE(DSPBBASE, I915_READ(DSPBBASE)); + + /* CRT state */ + I915_WRITE(ADPA, dev_priv->saveADPA); + + /* LVDS state */ + if (IS_I965G(dev)) + I915_WRITE(BLC_PWM_CTL2, dev_priv->saveBLC_PWM_CTL2); + if (IS_MOBILE(dev) && !IS_I830(dev)) + I915_WRITE(LVDS, dev_priv->saveLVDS); + if (!IS_I830(dev) && !IS_845G(dev)) + I915_WRITE(PFIT_CONTROL, dev_priv->savePFIT_CONTROL); + + I915_WRITE(PFIT_PGM_RATIOS, dev_priv->savePFIT_PGM_RATIOS); + I915_WRITE(BLC_PWM_CTL, dev_priv->saveBLC_PWM_CTL); + I915_WRITE(LVDSPP_ON, dev_priv->saveLVDSPP_ON); + I915_WRITE(LVDSPP_OFF, dev_priv->saveLVDSPP_OFF); + I915_WRITE(PP_CYCLE, dev_priv->savePP_CYCLE); + I915_WRITE(PP_CONTROL, dev_priv->savePP_CONTROL); + + /* FIXME: restore TV & SDVO state */ + + /* FBC info */ + I915_WRITE(FBC_CFB_BASE, dev_priv->saveFBC_CFB_BASE); + I915_WRITE(FBC_LL_BASE, dev_priv->saveFBC_LL_BASE); + I915_WRITE(FBC_CONTROL2, dev_priv->saveFBC_CONTROL2); + I915_WRITE(FBC_CONTROL, dev_priv->saveFBC_CONTROL); + + /* VGA state */ + I915_WRITE(VGACNTRL, dev_priv->saveVGACNTRL); + I915_WRITE(VCLK_DIVISOR_VGA0, dev_priv->saveVCLK_DIVISOR_VGA0); + I915_WRITE(VCLK_DIVISOR_VGA1, dev_priv->saveVCLK_DIVISOR_VGA1); + I915_WRITE(VCLK_POST_DIV, dev_priv->saveVCLK_POST_DIV); + udelay(150); + + for (i = 0; i < 16; i++) { + I915_WRITE(SWF0 + (i << 2), dev_priv->saveSWF0[i]); + I915_WRITE(SWF10 + (i << 2), dev_priv->saveSWF1[i+7]); + } + for (i = 0; i < 3; i++) + I915_WRITE(SWF30 + (i << 2), dev_priv->saveSWF2[i]); + + i915_restore_vga(dev); + + return 0; +} + static struct drm_driver driver = { /* don't use mtrr's here, the Xserver or user space app should * deal with them for intel hardware. @@ -47,8 +506,11 @@ static struct drm_driver driver = { DRIVER_HAVE_IRQ | DRIVER_IRQ_SHARED | DRIVER_IRQ_VBL | DRIVER_IRQ_VBL2, .load = i915_driver_load, + .unload = i915_driver_unload, .lastclose = i915_driver_lastclose, .preclose = i915_driver_preclose, + .suspend = i915_suspend, + .resume = i915_resume, .device_is_agp = i915_driver_device_is_agp, .vblank_wait = i915_driver_vblank_wait, .vblank_wait2 = i915_driver_vblank_wait2, diff --git a/drivers/char/drm/i915_drv.h b/drivers/char/drm/i915_drv.h index f8cc71915c8e..661e2f571195 100644 --- a/drivers/char/drm/i915_drv.h +++ b/drivers/char/drm/i915_drv.h @@ -114,6 +114,85 @@ typedef struct drm_i915_private { spinlock_t swaps_lock; drm_i915_vbl_swap_t vbl_swaps; unsigned int swaps_pending; + + /* Register state */ + u8 saveLBB; + u32 saveDSPACNTR; + u32 saveDSPBCNTR; + u32 savePIPEACONF; + u32 savePIPEBCONF; + u32 savePIPEASRC; + u32 savePIPEBSRC; + u32 saveFPA0; + u32 saveFPA1; + u32 saveDPLL_A; + u32 saveDPLL_A_MD; + u32 saveHTOTAL_A; + u32 saveHBLANK_A; + u32 saveHSYNC_A; + u32 saveVTOTAL_A; + u32 saveVBLANK_A; + u32 saveVSYNC_A; + u32 saveBCLRPAT_A; + u32 saveDSPASTRIDE; + u32 saveDSPASIZE; + u32 saveDSPAPOS; + u32 saveDSPABASE; + u32 saveDSPASURF; + u32 saveDSPATILEOFF; + u32 savePFIT_PGM_RATIOS; + u32 saveBLC_PWM_CTL; + u32 saveBLC_PWM_CTL2; + u32 saveFPB0; + u32 saveFPB1; + u32 saveDPLL_B; + u32 saveDPLL_B_MD; + u32 saveHTOTAL_B; + u32 saveHBLANK_B; + u32 saveHSYNC_B; + u32 saveVTOTAL_B; + u32 saveVBLANK_B; + u32 saveVSYNC_B; + u32 saveBCLRPAT_B; + u32 saveDSPBSTRIDE; + u32 saveDSPBSIZE; + u32 saveDSPBPOS; + u32 saveDSPBBASE; + u32 saveDSPBSURF; + u32 saveDSPBTILEOFF; + u32 saveVCLK_DIVISOR_VGA0; + u32 saveVCLK_DIVISOR_VGA1; + u32 saveVCLK_POST_DIV; + u32 saveVGACNTRL; + u32 saveADPA; + u32 saveLVDS; + u32 saveLVDSPP_ON; + u32 saveLVDSPP_OFF; + u32 saveDVOA; + u32 saveDVOB; + u32 saveDVOC; + u32 savePP_ON; + u32 savePP_OFF; + u32 savePP_CONTROL; + u32 savePP_CYCLE; + u32 savePFIT_CONTROL; + u32 save_palette_a[256]; + u32 save_palette_b[256]; + u32 saveFBC_CFB_BASE; + u32 saveFBC_LL_BASE; + u32 saveFBC_CONTROL; + u32 saveFBC_CONTROL2; + u32 saveSWF0[16]; + u32 saveSWF1[16]; + u32 saveSWF2[3]; + u8 saveMSR; + u8 saveSR[8]; + u8 saveGR[24]; + u8 saveAR_INDEX; + u8 saveAR[20]; + u8 saveDACMASK; + u8 saveDACDATA[256*3]; /* 256 3-byte colors */ + u8 saveCR[36]; } drm_i915_private_t; extern struct drm_ioctl_desc i915_ioctls[]; @@ -122,6 +201,7 @@ extern int i915_max_ioctl; /* i915_dma.c */ extern void i915_kernel_lost_context(struct drm_device * dev); extern int i915_driver_load(struct drm_device *, unsigned long flags); +extern int i915_driver_unload(struct drm_device *); extern void i915_driver_lastclose(struct drm_device * dev); extern void i915_driver_preclose(struct drm_device *dev, struct drm_file *file_priv); @@ -200,6 +280,50 @@ extern void i915_mem_release(struct drm_device * dev, extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller); +/* Extended config space */ +#define LBB 0xf4 + +/* VGA stuff */ + +#define VGA_ST01_MDA 0x3ba +#define VGA_ST01_CGA 0x3da + +#define VGA_MSR_WRITE 0x3c2 +#define VGA_MSR_READ 0x3cc +#define VGA_MSR_MEM_EN (1<<1) +#define VGA_MSR_CGA_MODE (1<<0) + +#define VGA_SR_INDEX 0x3c4 +#define VGA_SR_DATA 0x3c5 + +#define VGA_AR_INDEX 0x3c0 +#define VGA_AR_VID_EN (1<<5) +#define VGA_AR_DATA_WRITE 0x3c0 +#define VGA_AR_DATA_READ 0x3c1 + +#define VGA_GR_INDEX 0x3ce +#define VGA_GR_DATA 0x3cf +/* GR05 */ +#define VGA_GR_MEM_READ_MODE_SHIFT 3 +#define VGA_GR_MEM_READ_MODE_PLANE 1 +/* GR06 */ +#define VGA_GR_MEM_MODE_MASK 0xc +#define VGA_GR_MEM_MODE_SHIFT 2 +#define VGA_GR_MEM_A0000_AFFFF 0 +#define VGA_GR_MEM_A0000_BFFFF 1 +#define VGA_GR_MEM_B0000_B7FFF 2 +#define VGA_GR_MEM_B0000_BFFFF 3 + +#define VGA_DACMASK 0x3c6 +#define VGA_DACRX 0x3c7 +#define VGA_DACWX 0x3c8 +#define VGA_DACDATA 0x3c9 + +#define VGA_CR_INDEX_MDA 0x3b4 +#define VGA_CR_DATA_MDA 0x3b5 +#define VGA_CR_INDEX_CGA 0x3d4 +#define VGA_CR_DATA_CGA 0x3d5 + #define GFX_OP_USER_INTERRUPT ((0<<29)|(2<<23)) #define GFX_OP_BREAKPOINT_INTERRUPT ((0<<29)|(1<<23)) #define CMD_REPORT_HEAD (7<<23) @@ -215,6 +339,44 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller); #define BB1_UNPROTECTED (0<<0) #define BB2_END_ADDR_MASK (~0x7) +/* Framebuffer compression */ +#define FBC_CFB_BASE 0x03200 /* 4k page aligned */ +#define FBC_LL_BASE 0x03204 /* 4k page aligned */ +#define FBC_CONTROL 0x03208 +#define FBC_CTL_EN (1<<31) +#define FBC_CTL_PERIODIC (1<<30) +#define FBC_CTL_INTERVAL_SHIFT (16) +#define FBC_CTL_UNCOMPRESSIBLE (1<<14) +#define FBC_CTL_STRIDE_SHIFT (5) +#define FBC_CTL_FENCENO (1<<0) +#define FBC_COMMAND 0x0320c +#define FBC_CMD_COMPRESS (1<<0) +#define FBC_STATUS 0x03210 +#define FBC_STAT_COMPRESSING (1<<31) +#define FBC_STAT_COMPRESSED (1<<30) +#define FBC_STAT_MODIFIED (1<<29) +#define FBC_STAT_CURRENT_LINE (1<<0) +#define FBC_CONTROL2 0x03214 +#define FBC_CTL_FENCE_DBL (0<<4) +#define FBC_CTL_IDLE_IMM (0<<2) +#define FBC_CTL_IDLE_FULL (1<<2) +#define FBC_CTL_IDLE_LINE (2<<2) +#define FBC_CTL_IDLE_DEBUG (3<<2) +#define FBC_CTL_CPU_FENCE (1<<1) +#define FBC_CTL_PLANEA (0<<0) +#define FBC_CTL_PLANEB (1<<0) +#define FBC_FENCE_OFF 0x0321b + +#define FBC_LL_SIZE (1536) +#define FBC_LL_PAD (32) + +/* Interrupt bits: + */ +#define USER_INT_FLAG (1<<1) +#define VSYNC_PIPEB_FLAG (1<<5) +#define VSYNC_PIPEA_FLAG (1<<7) +#define HWB_OOM_FLAG (1<<13) /* binner out of memory */ + #define I915REG_HWSTAM 0x02098 #define I915REG_INT_IDENTITY_R 0x020a4 #define I915REG_INT_MASK_R 0x020a8 @@ -251,6 +413,10 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller); #define NOPID 0x2094 #define LP_RING 0x2030 #define HP_RING 0x2040 +/* The binner has its own ring buffer: + */ +#define HWB_RING 0x2400 + #define RING_TAIL 0x00 #define TAIL_ADDR 0x001FFFF8 #define RING_HEAD 0x04 @@ -269,11 +435,105 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller); #define RING_VALID 0x00000001 #define RING_INVALID 0x00000000 +/* Instruction parser error reg: + */ +#define IPEIR 0x2088 + +/* Scratch pad debug 0 reg: + */ +#define SCPD0 0x209c + +/* Error status reg: + */ +#define ESR 0x20b8 + +/* Secondary DMA fetch address debug reg: + */ +#define DMA_FADD_S 0x20d4 + +/* Cache mode 0 reg. + * - Manipulating render cache behaviour is central + * to the concept of zone rendering, tuning this reg can help avoid + * unnecessary render cache reads and even writes (for z/stencil) + * at beginning and end of scene. + * + * - To change a bit, write to this reg with a mask bit set and the + * bit of interest either set or cleared. EG: (BIT<<16) | BIT to set. + */ +#define Cache_Mode_0 0x2120 +#define CM0_MASK_SHIFT 16 +#define CM0_IZ_OPT_DISABLE (1<<6) +#define CM0_ZR_OPT_DISABLE (1<<5) +#define CM0_DEPTH_EVICT_DISABLE (1<<4) +#define CM0_COLOR_EVICT_DISABLE (1<<3) +#define CM0_DEPTH_WRITE_DISABLE (1<<1) +#define CM0_RC_OP_FLUSH_DISABLE (1<<0) + + +/* Graphics flush control. A CPU write flushes the GWB of all writes. + * The data is discarded. + */ +#define GFX_FLSH_CNTL 0x2170 + +/* Binner control. Defines the location of the bin pointer list: + */ +#define BINCTL 0x2420 +#define BC_MASK (1 << 9) + +/* Binned scene info. + */ +#define BINSCENE 0x2428 +#define BS_OP_LOAD (1 << 8) +#define BS_MASK (1 << 22) + +/* Bin command parser debug reg: + */ +#define BCPD 0x2480 + +/* Bin memory control debug reg: + */ +#define BMCD 0x2484 + +/* Bin data cache debug reg: + */ +#define BDCD 0x2488 + +/* Binner pointer cache debug reg: + */ +#define BPCD 0x248c + +/* Binner scratch pad debug reg: + */ +#define BINSKPD 0x24f0 + +/* HWB scratch pad debug reg: + */ +#define HWBSKPD 0x24f4 + +/* Binner memory pool reg: + */ +#define BMP_BUFFER 0x2430 +#define BMP_PAGE_SIZE_4K (0 << 10) +#define BMP_BUFFER_SIZE_SHIFT 1 +#define BMP_ENABLE (1 << 0) + +/* Get/put memory from the binner memory pool: + */ +#define BMP_GET 0x2438 +#define BMP_PUT 0x2440 +#define BMP_OFFSET_SHIFT 5 + +/* 3D state packets: + */ +#define GFX_OP_RASTER_RULES ((0x3<<29)|(0x7<<24)) + #define GFX_OP_SCISSOR ((0x3<<29)|(0x1c<<24)|(0x10<<19)) #define SC_UPDATE_SCISSOR (0x1<<1) #define SC_ENABLE_MASK (0x1<<0) #define SC_ENABLE (0x1<<0) +#define GFX_OP_LOAD_INDIRECT ((0x3<<29)|(0x1d<<24)|(0x7<<16)) + #define GFX_OP_SCISSOR_INFO ((0x3<<29)|(0x1d<<24)|(0x81<<16)|(0x1)) #define SCI_YMIN_MASK (0xffff<<16) #define SCI_XMIN_MASK (0xffff<<0) @@ -290,6 +550,7 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller); #define GFX_OP_DRAWRECT_INFO_I965 ((0x7900<<16)|0x2) +#define SRC_COPY_BLT_CMD ((2<<29)|(0x43<<22)|4) #define XY_SRC_COPY_BLT_CMD ((2<<29)|(0x53<<22)|6) #define XY_SRC_COPY_BLT_WRITE_ALPHA (1<<21) #define XY_SRC_COPY_BLT_WRITE_RGB (1<<20) @@ -301,6 +562,7 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller); #define MI_BATCH_NON_SECURE_I965 (1<<8) #define MI_WAIT_FOR_EVENT ((0x3<<23)) +#define MI_WAIT_FOR_PLANE_B_FLIP (1<<6) #define MI_WAIT_FOR_PLANE_A_FLIP (1<<2) #define MI_WAIT_FOR_PLANE_A_SCANLINES (1<<1) @@ -308,9 +570,535 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller); #define CMD_OP_DISPLAYBUFFER_INFO ((0x0<<29)|(0x14<<23)|2) #define ASYNC_FLIP (1<<22) +#define DISPLAY_PLANE_A (0<<20) +#define DISPLAY_PLANE_B (1<<20) + +/* Display regs */ +#define DSPACNTR 0x70180 +#define DSPBCNTR 0x71180 +#define DISPPLANE_SEL_PIPE_MASK (1<<24) + +/* Define the region of interest for the binner: + */ +#define CMD_OP_BIN_CONTROL ((0x3<<29)|(0x1d<<24)|(0x84<<16)|4) #define CMD_OP_DESTBUFFER_INFO ((0x3<<29)|(0x1d<<24)|(0x8e<<16)|1) -#define READ_BREADCRUMB(dev_priv) (((u32 *)(dev_priv->hw_status_page))[5]) +#define CMD_MI_FLUSH (0x04 << 23) +#define MI_NO_WRITE_FLUSH (1 << 2) +#define MI_READ_FLUSH (1 << 0) +#define MI_EXE_FLUSH (1 << 1) +#define MI_END_SCENE (1 << 4) /* flush binner and incr scene count */ +#define MI_SCENE_COUNT (1 << 3) /* just increment scene count */ + +#define BREADCRUMB_BITS 31 +#define BREADCRUMB_MASK ((1U << BREADCRUMB_BITS) - 1) + +#define READ_BREADCRUMB(dev_priv) (((volatile u32*)(dev_priv->hw_status_page))[5]) +#define READ_HWSP(dev_priv, reg) (((volatile u32*)(dev_priv->hw_status_page))[reg]) + +#define BLC_PWM_CTL 0x61254 +#define BACKLIGHT_MODULATION_FREQ_SHIFT (17) + +#define BLC_PWM_CTL2 0x61250 +/** + * This is the most significant 15 bits of the number of backlight cycles in a + * complete cycle of the modulated backlight control. + * + * The actual value is this field multiplied by two. + */ +#define BACKLIGHT_MODULATION_FREQ_MASK (0x7fff << 17) +#define BLM_LEGACY_MODE (1 << 16) +/** + * This is the number of cycles out of the backlight modulation cycle for which + * the backlight is on. + * + * This field must be no greater than the number of cycles in the complete + * backlight modulation cycle. + */ +#define BACKLIGHT_DUTY_CYCLE_SHIFT (0) +#define BACKLIGHT_DUTY_CYCLE_MASK (0xffff) + +#define I915_GCFGC 0xf0 +#define I915_LOW_FREQUENCY_ENABLE (1 << 7) +#define I915_DISPLAY_CLOCK_190_200_MHZ (0 << 4) +#define I915_DISPLAY_CLOCK_333_MHZ (4 << 4) +#define I915_DISPLAY_CLOCK_MASK (7 << 4) + +#define I855_HPLLCC 0xc0 +#define I855_CLOCK_CONTROL_MASK (3 << 0) +#define I855_CLOCK_133_200 (0 << 0) +#define I855_CLOCK_100_200 (1 << 0) +#define I855_CLOCK_100_133 (2 << 0) +#define I855_CLOCK_166_250 (3 << 0) + +/* p317, 319 + */ +#define VCLK2_VCO_M 0x6008 /* treat as 16 bit? (includes msbs) */ +#define VCLK2_VCO_N 0x600a +#define VCLK2_VCO_DIV_SEL 0x6012 + +#define VCLK_DIVISOR_VGA0 0x6000 +#define VCLK_DIVISOR_VGA1 0x6004 +#define VCLK_POST_DIV 0x6010 +/** Selects a post divisor of 4 instead of 2. */ +# define VGA1_PD_P2_DIV_4 (1 << 15) +/** Overrides the p2 post divisor field */ +# define VGA1_PD_P1_DIV_2 (1 << 13) +# define VGA1_PD_P1_SHIFT 8 +/** P1 value is 2 greater than this field */ +# define VGA1_PD_P1_MASK (0x1f << 8) +/** Selects a post divisor of 4 instead of 2. */ +# define VGA0_PD_P2_DIV_4 (1 << 7) +/** Overrides the p2 post divisor field */ +# define VGA0_PD_P1_DIV_2 (1 << 5) +# define VGA0_PD_P1_SHIFT 0 +/** P1 value is 2 greater than this field */ +# define VGA0_PD_P1_MASK (0x1f << 0) + +/* I830 CRTC registers */ +#define HTOTAL_A 0x60000 +#define HBLANK_A 0x60004 +#define HSYNC_A 0x60008 +#define VTOTAL_A 0x6000c +#define VBLANK_A 0x60010 +#define VSYNC_A 0x60014 +#define PIPEASRC 0x6001c +#define BCLRPAT_A 0x60020 +#define VSYNCSHIFT_A 0x60028 + +#define HTOTAL_B 0x61000 +#define HBLANK_B 0x61004 +#define HSYNC_B 0x61008 +#define VTOTAL_B 0x6100c +#define VBLANK_B 0x61010 +#define VSYNC_B 0x61014 +#define PIPEBSRC 0x6101c +#define BCLRPAT_B 0x61020 +#define VSYNCSHIFT_B 0x61028 + +#define PP_STATUS 0x61200 +# define PP_ON (1 << 31) +/** + * Indicates that all dependencies of the panel are on: + * + * - PLL enabled + * - pipe enabled + * - LVDS/DVOB/DVOC on + */ +# define PP_READY (1 << 30) +# define PP_SEQUENCE_NONE (0 << 28) +# define PP_SEQUENCE_ON (1 << 28) +# define PP_SEQUENCE_OFF (2 << 28) +# define PP_SEQUENCE_MASK 0x30000000 +#define PP_CONTROL 0x61204 +# define POWER_TARGET_ON (1 << 0) + +#define LVDSPP_ON 0x61208 +#define LVDSPP_OFF 0x6120c +#define PP_CYCLE 0x61210 + +#define PFIT_CONTROL 0x61230 +# define PFIT_ENABLE (1 << 31) +# define PFIT_PIPE_MASK (3 << 29) +# define PFIT_PIPE_SHIFT 29 +# define VERT_INTERP_DISABLE (0 << 10) +# define VERT_INTERP_BILINEAR (1 << 10) +# define VERT_INTERP_MASK (3 << 10) +# define VERT_AUTO_SCALE (1 << 9) +# define HORIZ_INTERP_DISABLE (0 << 6) +# define HORIZ_INTERP_BILINEAR (1 << 6) +# define HORIZ_INTERP_MASK (3 << 6) +# define HORIZ_AUTO_SCALE (1 << 5) +# define PANEL_8TO6_DITHER_ENABLE (1 << 3) + +#define PFIT_PGM_RATIOS 0x61234 +# define PFIT_VERT_SCALE_MASK 0xfff00000 +# define PFIT_HORIZ_SCALE_MASK 0x0000fff0 + +#define PFIT_AUTO_RATIOS 0x61238 + + +#define DPLL_A 0x06014 +#define DPLL_B 0x06018 +# define DPLL_VCO_ENABLE (1 << 31) +# define DPLL_DVO_HIGH_SPEED (1 << 30) +# define DPLL_SYNCLOCK_ENABLE (1 << 29) +# define DPLL_VGA_MODE_DIS (1 << 28) +# define DPLLB_MODE_DAC_SERIAL (1 << 26) /* i915 */ +# define DPLLB_MODE_LVDS (2 << 26) /* i915 */ +# define DPLL_MODE_MASK (3 << 26) +# define DPLL_DAC_SERIAL_P2_CLOCK_DIV_10 (0 << 24) /* i915 */ +# define DPLL_DAC_SERIAL_P2_CLOCK_DIV_5 (1 << 24) /* i915 */ +# define DPLLB_LVDS_P2_CLOCK_DIV_14 (0 << 24) /* i915 */ +# define DPLLB_LVDS_P2_CLOCK_DIV_7 (1 << 24) /* i915 */ +# define DPLL_P2_CLOCK_DIV_MASK 0x03000000 /* i915 */ +# define DPLL_FPA01_P1_POST_DIV_MASK 0x00ff0000 /* i915 */ +/** + * The i830 generation, in DAC/serial mode, defines p1 as two plus this + * bitfield, or just 2 if PLL_P1_DIVIDE_BY_TWO is set. + */ +# define DPLL_FPA01_P1_POST_DIV_MASK_I830 0x001f0000 +/** + * The i830 generation, in LVDS mode, defines P1 as the bit number set within + * this field (only one bit may be set). + */ +# define DPLL_FPA01_P1_POST_DIV_MASK_I830_LVDS 0x003f0000 +# define DPLL_FPA01_P1_POST_DIV_SHIFT 16 +# define PLL_P2_DIVIDE_BY_4 (1 << 23) /* i830, required in DVO non-gang */ +# define PLL_P1_DIVIDE_BY_TWO (1 << 21) /* i830 */ +# define PLL_REF_INPUT_DREFCLK (0 << 13) +# define PLL_REF_INPUT_TVCLKINA (1 << 13) /* i830 */ +# define PLL_REF_INPUT_TVCLKINBC (2 << 13) /* SDVO TVCLKIN */ +# define PLLB_REF_INPUT_SPREADSPECTRUMIN (3 << 13) +# define PLL_REF_INPUT_MASK (3 << 13) +# define PLL_LOAD_PULSE_PHASE_SHIFT 9 +/* + * Parallel to Serial Load Pulse phase selection. + * Selects the phase for the 10X DPLL clock for the PCIe + * digital display port. The range is 4 to 13; 10 or more + * is just a flip delay. The default is 6 + */ +# define PLL_LOAD_PULSE_PHASE_MASK (0xf << PLL_LOAD_PULSE_PHASE_SHIFT) +# define DISPLAY_RATE_SELECT_FPA1 (1 << 8) + +/** + * SDVO multiplier for 945G/GM. Not used on 965. + * + * \sa DPLL_MD_UDI_MULTIPLIER_MASK + */ +# define SDVO_MULTIPLIER_MASK 0x000000ff +# define SDVO_MULTIPLIER_SHIFT_HIRES 4 +# define SDVO_MULTIPLIER_SHIFT_VGA 0 + +/** @defgroup DPLL_MD + * @{ + */ +/** Pipe A SDVO/UDI clock multiplier/divider register for G965. */ +#define DPLL_A_MD 0x0601c +/** Pipe B SDVO/UDI clock multiplier/divider register for G965. */ +#define DPLL_B_MD 0x06020 +/** + * UDI pixel divider, controlling how many pixels are stuffed into a packet. + * + * Value is pixels minus 1. Must be set to 1 pixel for SDVO. + */ +# define DPLL_MD_UDI_DIVIDER_MASK 0x3f000000 +# define DPLL_MD_UDI_DIVIDER_SHIFT 24 +/** UDI pixel divider for VGA, same as DPLL_MD_UDI_DIVIDER_MASK. */ +# define DPLL_MD_VGA_UDI_DIVIDER_MASK 0x003f0000 +# define DPLL_MD_VGA_UDI_DIVIDER_SHIFT 16 +/** + * SDVO/UDI pixel multiplier. + * + * SDVO requires that the bus clock rate be between 1 and 2 Ghz, and the bus + * clock rate is 10 times the DPLL clock. At low resolution/refresh rate + * modes, the bus rate would be below the limits, so SDVO allows for stuffing + * dummy bytes in the datastream at an increased clock rate, with both sides of + * the link knowing how many bytes are fill. + * + * So, for a mode with a dotclock of 65Mhz, we would want to double the clock + * rate to 130Mhz to get a bus rate of 1.30Ghz. The DPLL clock rate would be + * set to 130Mhz, and the SDVO multiplier set to 2x in this register and + * through an SDVO command. + * + * This register field has values of multiplication factor minus 1, with + * a maximum multiplier of 5 for SDVO. + */ +# define DPLL_MD_UDI_MULTIPLIER_MASK 0x00003f00 +# define DPLL_MD_UDI_MULTIPLIER_SHIFT 8 +/** SDVO/UDI pixel multiplier for VGA, same as DPLL_MD_UDI_MULTIPLIER_MASK. + * This best be set to the default value (3) or the CRT won't work. No, + * I don't entirely understand what this does... + */ +# define DPLL_MD_VGA_UDI_MULTIPLIER_MASK 0x0000003f +# define DPLL_MD_VGA_UDI_MULTIPLIER_SHIFT 0 +/** @} */ + +#define DPLL_TEST 0x606c +# define DPLLB_TEST_SDVO_DIV_1 (0 << 22) +# define DPLLB_TEST_SDVO_DIV_2 (1 << 22) +# define DPLLB_TEST_SDVO_DIV_4 (2 << 22) +# define DPLLB_TEST_SDVO_DIV_MASK (3 << 22) +# define DPLLB_TEST_N_BYPASS (1 << 19) +# define DPLLB_TEST_M_BYPASS (1 << 18) +# define DPLLB_INPUT_BUFFER_ENABLE (1 << 16) +# define DPLLA_TEST_N_BYPASS (1 << 3) +# define DPLLA_TEST_M_BYPASS (1 << 2) +# define DPLLA_INPUT_BUFFER_ENABLE (1 << 0) + +#define ADPA 0x61100 +#define ADPA_DAC_ENABLE (1<<31) +#define ADPA_DAC_DISABLE 0 +#define ADPA_PIPE_SELECT_MASK (1<<30) +#define ADPA_PIPE_A_SELECT 0 +#define ADPA_PIPE_B_SELECT (1<<30) +#define ADPA_USE_VGA_HVPOLARITY (1<<15) +#define ADPA_SETS_HVPOLARITY 0 +#define ADPA_VSYNC_CNTL_DISABLE (1<<11) +#define ADPA_VSYNC_CNTL_ENABLE 0 +#define ADPA_HSYNC_CNTL_DISABLE (1<<10) +#define ADPA_HSYNC_CNTL_ENABLE 0 +#define ADPA_VSYNC_ACTIVE_HIGH (1<<4) +#define ADPA_VSYNC_ACTIVE_LOW 0 +#define ADPA_HSYNC_ACTIVE_HIGH (1<<3) +#define ADPA_HSYNC_ACTIVE_LOW 0 + +#define FPA0 0x06040 +#define FPA1 0x06044 +#define FPB0 0x06048 +#define FPB1 0x0604c +# define FP_N_DIV_MASK 0x003f0000 +# define FP_N_DIV_SHIFT 16 +# define FP_M1_DIV_MASK 0x00003f00 +# define FP_M1_DIV_SHIFT 8 +# define FP_M2_DIV_MASK 0x0000003f +# define FP_M2_DIV_SHIFT 0 + + +#define PORT_HOTPLUG_EN 0x61110 +# define SDVOB_HOTPLUG_INT_EN (1 << 26) +# define SDVOC_HOTPLUG_INT_EN (1 << 25) +# define TV_HOTPLUG_INT_EN (1 << 18) +# define CRT_HOTPLUG_INT_EN (1 << 9) +# define CRT_HOTPLUG_FORCE_DETECT (1 << 3) + +#define PORT_HOTPLUG_STAT 0x61114 +# define CRT_HOTPLUG_INT_STATUS (1 << 11) +# define TV_HOTPLUG_INT_STATUS (1 << 10) +# define CRT_HOTPLUG_MONITOR_MASK (3 << 8) +# define CRT_HOTPLUG_MONITOR_COLOR (3 << 8) +# define CRT_HOTPLUG_MONITOR_MONO (2 << 8) +# define CRT_HOTPLUG_MONITOR_NONE (0 << 8) +# define SDVOC_HOTPLUG_INT_STATUS (1 << 7) +# define SDVOB_HOTPLUG_INT_STATUS (1 << 6) + +#define SDVOB 0x61140 +#define SDVOC 0x61160 +#define SDVO_ENABLE (1 << 31) +#define SDVO_PIPE_B_SELECT (1 << 30) +#define SDVO_STALL_SELECT (1 << 29) +#define SDVO_INTERRUPT_ENABLE (1 << 26) +/** + * 915G/GM SDVO pixel multiplier. + * + * Programmed value is multiplier - 1, up to 5x. + * + * \sa DPLL_MD_UDI_MULTIPLIER_MASK + */ +#define SDVO_PORT_MULTIPLY_MASK (7 << 23) +#define SDVO_PORT_MULTIPLY_SHIFT 23 +#define SDVO_PHASE_SELECT_MASK (15 << 19) +#define SDVO_PHASE_SELECT_DEFAULT (6 << 19) +#define SDVO_CLOCK_OUTPUT_INVERT (1 << 18) +#define SDVOC_GANG_MODE (1 << 16) +#define SDVO_BORDER_ENABLE (1 << 7) +#define SDVOB_PCIE_CONCURRENCY (1 << 3) +#define SDVO_DETECTED (1 << 2) +/* Bits to be preserved when writing */ +#define SDVOB_PRESERVE_MASK ((1 << 17) | (1 << 16) | (1 << 14)) +#define SDVOC_PRESERVE_MASK (1 << 17) + +/** @defgroup LVDS + * @{ + */ +/** + * This register controls the LVDS output enable, pipe selection, and data + * format selection. + * + * All of the clock/data pairs are force powered down by power sequencing. + */ +#define LVDS 0x61180 +/** + * Enables the LVDS port. This bit must be set before DPLLs are enabled, as + * the DPLL semantics change when the LVDS is assigned to that pipe. + */ +# define LVDS_PORT_EN (1 << 31) +/** Selects pipe B for LVDS data. Must be set on pre-965. */ +# define LVDS_PIPEB_SELECT (1 << 30) + +/** + * Enables the A0-A2 data pairs and CLKA, containing 18 bits of color data per + * pixel. + */ +# define LVDS_A0A2_CLKA_POWER_MASK (3 << 8) +# define LVDS_A0A2_CLKA_POWER_DOWN (0 << 8) +# define LVDS_A0A2_CLKA_POWER_UP (3 << 8) +/** + * Controls the A3 data pair, which contains the additional LSBs for 24 bit + * mode. Only enabled if LVDS_A0A2_CLKA_POWER_UP also indicates it should be + * on. + */ +# define LVDS_A3_POWER_MASK (3 << 6) +# define LVDS_A3_POWER_DOWN (0 << 6) +# define LVDS_A3_POWER_UP (3 << 6) +/** + * Controls the CLKB pair. This should only be set when LVDS_B0B3_POWER_UP + * is set. + */ +# define LVDS_CLKB_POWER_MASK (3 << 4) +# define LVDS_CLKB_POWER_DOWN (0 << 4) +# define LVDS_CLKB_POWER_UP (3 << 4) + +/** + * Controls the B0-B3 data pairs. This must be set to match the DPLL p2 + * setting for whether we are in dual-channel mode. The B3 pair will + * additionally only be powered up when LVDS_A3_POWER_UP is set. + */ +# define LVDS_B0B3_POWER_MASK (3 << 2) +# define LVDS_B0B3_POWER_DOWN (0 << 2) +# define LVDS_B0B3_POWER_UP (3 << 2) + +#define PIPEACONF 0x70008 +#define PIPEACONF_ENABLE (1<<31) +#define PIPEACONF_DISABLE 0 +#define PIPEACONF_DOUBLE_WIDE (1<<30) +#define I965_PIPECONF_ACTIVE (1<<30) +#define PIPEACONF_SINGLE_WIDE 0 +#define PIPEACONF_PIPE_UNLOCKED 0 +#define PIPEACONF_PIPE_LOCKED (1<<25) +#define PIPEACONF_PALETTE 0 +#define PIPEACONF_GAMMA (1<<24) +#define PIPECONF_FORCE_BORDER (1<<25) +#define PIPECONF_PROGRESSIVE (0 << 21) +#define PIPECONF_INTERLACE_W_FIELD_INDICATION (6 << 21) +#define PIPECONF_INTERLACE_FIELD_0_ONLY (7 << 21) + +#define PIPEBCONF 0x71008 +#define PIPEBCONF_ENABLE (1<<31) +#define PIPEBCONF_DISABLE 0 +#define PIPEBCONF_DOUBLE_WIDE (1<<30) +#define PIPEBCONF_DISABLE 0 +#define PIPEBCONF_GAMMA (1<<24) +#define PIPEBCONF_PALETTE 0 + +#define PIPEBGCMAXRED 0x71010 +#define PIPEBGCMAXGREEN 0x71014 +#define PIPEBGCMAXBLUE 0x71018 +#define PIPEBSTAT 0x71024 +#define PIPEBFRAMEHIGH 0x71040 +#define PIPEBFRAMEPIXEL 0x71044 + +#define DSPACNTR 0x70180 +#define DSPBCNTR 0x71180 +#define DISPLAY_PLANE_ENABLE (1<<31) +#define DISPLAY_PLANE_DISABLE 0 +#define DISPPLANE_GAMMA_ENABLE (1<<30) +#define DISPPLANE_GAMMA_DISABLE 0 +#define DISPPLANE_PIXFORMAT_MASK (0xf<<26) +#define DISPPLANE_8BPP (0x2<<26) +#define DISPPLANE_15_16BPP (0x4<<26) +#define DISPPLANE_16BPP (0x5<<26) +#define DISPPLANE_32BPP_NO_ALPHA (0x6<<26) +#define DISPPLANE_32BPP (0x7<<26) +#define DISPPLANE_STEREO_ENABLE (1<<25) +#define DISPPLANE_STEREO_DISABLE 0 +#define DISPPLANE_SEL_PIPE_MASK (1<<24) +#define DISPPLANE_SEL_PIPE_A 0 +#define DISPPLANE_SEL_PIPE_B (1<<24) +#define DISPPLANE_SRC_KEY_ENABLE (1<<22) +#define DISPPLANE_SRC_KEY_DISABLE 0 +#define DISPPLANE_LINE_DOUBLE (1<<20) +#define DISPPLANE_NO_LINE_DOUBLE 0 +#define DISPPLANE_STEREO_POLARITY_FIRST 0 +#define DISPPLANE_STEREO_POLARITY_SECOND (1<<18) +/* plane B only */ +#define DISPPLANE_ALPHA_TRANS_ENABLE (1<<15) +#define DISPPLANE_ALPHA_TRANS_DISABLE 0 +#define DISPPLANE_SPRITE_ABOVE_DISPLAYA 0 +#define DISPPLANE_SPRITE_ABOVE_OVERLAY (1) + +#define DSPABASE 0x70184 +#define DSPASTRIDE 0x70188 + +#define DSPBBASE 0x71184 +#define DSPBADDR DSPBBASE +#define DSPBSTRIDE 0x71188 + +#define DSPAKEYVAL 0x70194 +#define DSPAKEYMASK 0x70198 + +#define DSPAPOS 0x7018C /* reserved */ +#define DSPASIZE 0x70190 +#define DSPBPOS 0x7118C +#define DSPBSIZE 0x71190 + +#define DSPASURF 0x7019C +#define DSPATILEOFF 0x701A4 + +#define DSPBSURF 0x7119C +#define DSPBTILEOFF 0x711A4 + +#define VGACNTRL 0x71400 +# define VGA_DISP_DISABLE (1 << 31) +# define VGA_2X_MODE (1 << 30) +# define VGA_PIPE_B_SELECT (1 << 29) + +/* + * Some BIOS scratch area registers. The 845 (and 830?) store the amount + * of video memory available to the BIOS in SWF1. + */ + +#define SWF0 0x71410 + +/* + * 855 scratch registers. + */ +#define SWF10 0x70410 + +#define SWF30 0x72414 + +/* + * Overlay registers. These are overlay registers accessed via MMIO. + * Those loaded via the overlay register page are defined in i830_video.c. + */ +#define OVADD 0x30000 + +#define DOVSTA 0x30008 +#define OC_BUF (0x3<<20) + +#define OGAMC5 0x30010 +#define OGAMC4 0x30014 +#define OGAMC3 0x30018 +#define OGAMC2 0x3001c +#define OGAMC1 0x30020 +#define OGAMC0 0x30024 +/* + * Palette registers + */ +#define PALETTE_A 0x0a000 +#define PALETTE_B 0x0a800 + +#define IS_I830(dev) ((dev)->pci_device == 0x3577) +#define IS_845G(dev) ((dev)->pci_device == 0x2562) +#define IS_I85X(dev) ((dev)->pci_device == 0x3582) +#define IS_I855(dev) ((dev)->pci_device == 0x3582) +#define IS_I865G(dev) ((dev)->pci_device == 0x2572) + +#define IS_I915G(dev) (dev->pci_device == 0x2582)/* || dev->pci_device == PCI_DEVICE_ID_INTELPCI_CHIP_E7221_G)*/ +#define IS_I915GM(dev) ((dev)->pci_device == 0x2592) +#define IS_I945G(dev) ((dev)->pci_device == 0x2772) +#define IS_I945GM(dev) ((dev)->pci_device == 0x27A2) + +#define IS_I965G(dev) ((dev)->pci_device == 0x2972 || \ + (dev)->pci_device == 0x2982 || \ + (dev)->pci_device == 0x2992 || \ + (dev)->pci_device == 0x29A2 || \ + (dev)->pci_device == 0x2A02 || \ + (dev)->pci_device == 0x2A12) + +#define IS_I965GM(dev) ((dev)->pci_device == 0x2A02) + +#define IS_G33(dev) ((dev)->pci_device == 0x29C2 || \ + (dev)->pci_device == 0x29B2 || \ + (dev)->pci_device == 0x29D2) + +#define IS_I9XX(dev) (IS_I915G(dev) || IS_I915GM(dev) || IS_I945G(dev) || \ + IS_I945GM(dev) || IS_I965G(dev) || IS_G33(dev)) + +#define IS_MOBILE(dev) (IS_I830(dev) || IS_I85X(dev) || IS_I915GM(dev) || \ + IS_I945GM(dev) || IS_I965GM(dev)) + +#define PRIMARY_RINGBUFFER_SIZE (128*1024) #endif |
