diff options
| -rw-r--r-- | drivers/clk/meson/Kconfig | 7 | ||||
| -rw-r--r-- | drivers/clk/meson/Makefile | 1 | ||||
| -rw-r--r-- | drivers/clk/meson/gxbb-aoclk.c | 94 | ||||
| -rw-r--r-- | drivers/clk/meson/gxbb-aoclk.h | 5 | ||||
| -rw-r--r-- | drivers/clk/meson/meson-aoclk.c | 81 | ||||
| -rw-r--r-- | drivers/clk/meson/meson-aoclk.h | 34 |
6 files changed, 160 insertions, 62 deletions
diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig index d5cbec522aec..fddc7ec7b820 100644 --- a/drivers/clk/meson/Kconfig +++ b/drivers/clk/meson/Kconfig @@ -3,6 +3,12 @@ config COMMON_CLK_AMLOGIC depends on OF depends on ARCH_MESON || COMPILE_TEST +config COMMON_CLK_MESON_AO + bool + depends on OF + depends on ARCH_MESON || COMPILE_TEST + select COMMON_CLK_REGMAP_MESON + config COMMON_CLK_REGMAP_MESON bool select REGMAP @@ -21,6 +27,7 @@ config COMMON_CLK_GXBB bool depends on COMMON_CLK_AMLOGIC select RESET_CONTROLLER + select COMMON_CLK_MESON_AO select COMMON_CLK_REGMAP_MESON select MFD_SYSCON help diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile index ffee82e60b7a..0a8df284f4e7 100644 --- a/drivers/clk/meson/Makefile +++ b/drivers/clk/meson/Makefile @@ -3,6 +3,7 @@ # obj-$(CONFIG_COMMON_CLK_AMLOGIC) += clk-pll.o clk-mpll.o clk-audio-divider.o +obj-$(CONFIG_COMMON_CLK_MESON_AO) += meson-aoclk.o obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o gxbb-aoclk-32k.o obj-$(CONFIG_COMMON_CLK_AXG) += axg.o diff --git a/drivers/clk/meson/gxbb-aoclk.c b/drivers/clk/meson/gxbb-aoclk.c index eebb580b9e0f..20f73e0d82a4 100644 --- a/drivers/clk/meson/gxbb-aoclk.c +++ b/drivers/clk/meson/gxbb-aoclk.c @@ -52,39 +52,12 @@ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -#include <linux/clk-provider.h> -#include <linux/of_address.h> #include <linux/platform_device.h> -#include <linux/reset-controller.h> #include <linux/mfd/syscon.h> -#include <linux/regmap.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <dt-bindings/clock/gxbb-aoclkc.h> -#include <dt-bindings/reset/gxbb-aoclkc.h> #include "clk-regmap.h" +#include "meson-aoclk.h" #include "gxbb-aoclk.h" -struct gxbb_aoclk_reset_controller { - struct reset_controller_dev reset; - unsigned int *data; - struct regmap *regmap; -}; - -static int gxbb_aoclk_do_reset(struct reset_controller_dev *rcdev, - unsigned long id) -{ - struct gxbb_aoclk_reset_controller *reset = - container_of(rcdev, struct gxbb_aoclk_reset_controller, reset); - - return regmap_write(reset->regmap, AO_RTI_GEN_CNTL_REG0, - BIT(reset->data[id])); -} - -static const struct reset_control_ops gxbb_aoclk_reset_ops = { - .reset = gxbb_aoclk_do_reset, -}; - #define GXBB_AO_GATE(_name, _bit) \ static struct clk_regmap _name##_ao = { \ .data = &(struct clk_regmap_gate_data) { \ @@ -117,7 +90,7 @@ static struct aoclk_cec_32k cec_32k_ao = { }, }; -static unsigned int gxbb_aoclk_reset[] = { +static const unsigned int gxbb_aoclk_reset[] = { [RESET_AO_REMOTE] = 16, [RESET_AO_I2C_MASTER] = 18, [RESET_AO_I2C_SLAVE] = 19, @@ -135,7 +108,7 @@ static struct clk_regmap *gxbb_aoclk_gate[] = { [CLKID_AO_IR_BLASTER] = &ir_blaster_ao, }; -static struct clk_hw_onecell_data gxbb_aoclk_onecell_data = { +static const struct clk_hw_onecell_data gxbb_aoclk_onecell_data = { .hws = { [CLKID_AO_REMOTE] = &remote_ao.hw, [CLKID_AO_I2C_MASTER] = &i2c_master_ao.hw, @@ -145,58 +118,55 @@ static struct clk_hw_onecell_data gxbb_aoclk_onecell_data = { [CLKID_AO_IR_BLASTER] = &ir_blaster_ao.hw, [CLKID_AO_CEC_32K] = &cec_32k_ao.hw, }, - .num = 7, + .num = NR_CLKS, }; -static int gxbb_aoclkc_probe(struct platform_device *pdev) +static int gxbb_register_cec_ao_32k(struct platform_device *pdev) { - struct gxbb_aoclk_reset_controller *rstc; struct device *dev = &pdev->dev; struct regmap *regmap; - int ret, clkid; - - rstc = devm_kzalloc(dev, sizeof(*rstc), GFP_KERNEL); - if (!rstc) - return -ENOMEM; + int ret; regmap = syscon_node_to_regmap(of_get_parent(dev->of_node)); if (IS_ERR(regmap)) { dev_err(dev, "failed to get regmap\n"); - return -ENODEV; - } - - /* Reset Controller */ - rstc->regmap = regmap; - rstc->data = gxbb_aoclk_reset; - rstc->reset.ops = &gxbb_aoclk_reset_ops; - rstc->reset.nr_resets = ARRAY_SIZE(gxbb_aoclk_reset); - rstc->reset.of_node = dev->of_node; - ret = devm_reset_controller_register(dev, &rstc->reset); - - /* - * Populate regmap and register all clks - */ - for (clkid = 0; clkid < ARRAY_SIZE(gxbb_aoclk_gate); clkid++) { - gxbb_aoclk_gate[clkid]->map = regmap; - - ret = devm_clk_hw_register(dev, - gxbb_aoclk_onecell_data.hws[clkid]); - if (ret) - return ret; + return PTR_ERR(regmap); } /* Specific clocks */ cec_32k_ao.regmap = regmap; ret = devm_clk_hw_register(dev, &cec_32k_ao.hw); + if (ret) { + dev_err(&pdev->dev, "clk cec_32k_ao register failed.\n"); + return ret; + } + + return 0; +} + +static const struct meson_aoclk_data gxbb_aoclkc_data = { + .reset_reg = AO_RTI_GEN_CNTL_REG0, + .num_reset = ARRAY_SIZE(gxbb_aoclk_reset), + .reset = gxbb_aoclk_reset, + .num_clks = ARRAY_SIZE(gxbb_aoclk_gate), + .clks = gxbb_aoclk_gate, + .hw_data = &gxbb_aoclk_onecell_data, +}; + +static int gxbb_aoclkc_probe(struct platform_device *pdev) +{ + int ret = gxbb_register_cec_ao_32k(pdev); if (ret) return ret; - return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get, - &gxbb_aoclk_onecell_data); + return meson_aoclkc_probe(pdev); } static const struct of_device_id gxbb_aoclkc_match_table[] = { - { .compatible = "amlogic,meson-gx-aoclkc" }, + { + .compatible = "amlogic,meson-gx-aoclkc", + .data = &gxbb_aoclkc_data, + }, { } }; diff --git a/drivers/clk/meson/gxbb-aoclk.h b/drivers/clk/meson/gxbb-aoclk.h index 0be78383f257..65962fc9ecdc 100644 --- a/drivers/clk/meson/gxbb-aoclk.h +++ b/drivers/clk/meson/gxbb-aoclk.h @@ -8,6 +8,8 @@ #ifndef __GXBB_AOCLKC_H #define __GXBB_AOCLKC_H +#define NR_CLKS 7 + /* AO Configuration Clock registers offsets */ #define AO_RTI_PWR_CNTL_REG1 0x0c #define AO_RTI_PWR_CNTL_REG0 0x10 @@ -28,4 +30,7 @@ struct aoclk_cec_32k { extern const struct clk_ops meson_aoclk_cec_32k_ops; +#include <dt-bindings/clock/gxbb-aoclkc.h> +#include <dt-bindings/reset/gxbb-aoclkc.h> + #endif /* __GXBB_AOCLKC_H */ diff --git a/drivers/clk/meson/meson-aoclk.c b/drivers/clk/meson/meson-aoclk.c new file mode 100644 index 000000000000..f965845917e3 --- /dev/null +++ b/drivers/clk/meson/meson-aoclk.c @@ -0,0 +1,81 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Amlogic Meson-AXG Clock Controller Driver + * + * Copyright (c) 2016 BayLibre, SAS. + * Author: Neil Armstrong <narmstrong@baylibre.com> + * + * Copyright (c) 2018 Amlogic, inc. + * Author: Qiufang Dai <qiufang.dai@amlogic.com> + * Author: Yixun Lan <yixun.lan@amlogic.com> + */ + +#include <linux/platform_device.h> +#include <linux/reset-controller.h> +#include <linux/mfd/syscon.h> +#include <linux/of_device.h> +#include "clk-regmap.h" +#include "meson-aoclk.h" + +static int meson_aoclk_do_reset(struct reset_controller_dev *rcdev, + unsigned long id) +{ + struct meson_aoclk_reset_controller *rstc = + container_of(rcdev, struct meson_aoclk_reset_controller, reset); + + return regmap_write(rstc->regmap, rstc->data->reset_reg, + BIT(rstc->data->reset[id])); +} + +static const struct reset_control_ops meson_aoclk_reset_ops = { + .reset = meson_aoclk_do_reset, +}; + +int meson_aoclkc_probe(struct platform_device *pdev) +{ + struct meson_aoclk_reset_controller *rstc; + struct meson_aoclk_data *data; + struct device *dev = &pdev->dev; + struct regmap *regmap; + int ret, clkid; + + data = (struct meson_aoclk_data *) of_device_get_match_data(dev); + if (!data) + return -ENODEV; + + rstc = devm_kzalloc(dev, sizeof(*rstc), GFP_KERNEL); + if (!rstc) + return -ENOMEM; + + regmap = syscon_node_to_regmap(of_get_parent(dev->of_node)); + if (IS_ERR(regmap)) { + dev_err(dev, "failed to get regmap\n"); + return PTR_ERR(regmap); + } + + /* Reset Controller */ + rstc->data = data; + rstc->regmap = regmap; + rstc->reset.ops = &meson_aoclk_reset_ops; + rstc->reset.nr_resets = data->num_reset, + rstc->reset.of_node = dev->of_node; + ret = devm_reset_controller_register(dev, &rstc->reset); + if (ret) { + dev_err(dev, "failed to register reset controller\n"); + return ret; + } + + /* + * Populate regmap and register all clks + */ + for (clkid = 0; clkid < data->num_clks; clkid++) { + data->clks[clkid]->map = regmap; + + ret = devm_clk_hw_register(dev, data->hw_data->hws[clkid]); + if (ret) + return ret; + } + + return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get, + (void *) data->hw_data); +} diff --git a/drivers/clk/meson/meson-aoclk.h b/drivers/clk/meson/meson-aoclk.h new file mode 100644 index 000000000000..ab2819e88922 --- /dev/null +++ b/drivers/clk/meson/meson-aoclk.h @@ -0,0 +1,34 @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ +/* + * Copyright (c) 2017 BayLibre, SAS + * Author: Neil Armstrong <narmstrong@baylibre.com> + * + * Copyright (c) 2018 Amlogic, inc. + * Author: Qiufang Dai <qiufang.dai@amlogic.com> + * Author: Yixun Lan <yixun.lan@amlogic.com> + */ + +#ifndef __MESON_AOCLK_H__ +#define __MESON_AOCLK_H__ + +#include <linux/platform_device.h> +#include <linux/reset-controller.h> +#include "clk-regmap.h" + +struct meson_aoclk_data { + const unsigned int reset_reg; + const int num_reset; + const unsigned int *reset; + int num_clks; + struct clk_regmap **clks; + const struct clk_hw_onecell_data *hw_data; +}; + +struct meson_aoclk_reset_controller { + struct reset_controller_dev reset; + const struct meson_aoclk_data *data; + struct regmap *regmap; +}; + +int meson_aoclkc_probe(struct platform_device *pdev); +#endif |
