diff options
| -rw-r--r-- | drivers/tty/amiserial.c | 91 |
1 files changed, 42 insertions, 49 deletions
diff --git a/drivers/tty/amiserial.c b/drivers/tty/amiserial.c index 165cd79faea2..5b87744748d5 100644 --- a/drivers/tty/amiserial.c +++ b/drivers/tty/amiserial.c @@ -102,7 +102,8 @@ static struct tty_driver *serial_driver; static unsigned char current_ctl_bits; -static void change_speed(struct serial_state *info, struct ktermios *old); +static void change_speed(struct tty_struct *tty, struct serial_state *info, + struct ktermios *old); static void rs_wait_until_sent(struct tty_struct *tty, int timeout); @@ -500,7 +501,7 @@ static irqreturn_t ser_tx_int(int irq, void *dev_id) * --------------------------------------------------------------- */ -static int startup(struct serial_state *info) +static int startup(struct tty_struct *tty, struct serial_state *info) { unsigned long flags; int retval=0; @@ -534,9 +535,7 @@ static int startup(struct serial_state *info) retval = request_irq(IRQ_AMIGA_VERTB, ser_vbl_int, 0, "serial status", info); if (retval) { if (serial_isroot()) { - if (info->tty) - set_bit(TTY_IO_ERROR, - &info->tty->flags); + set_bit(TTY_IO_ERROR, &tty->flags); retval = 0; } goto errout; @@ -551,32 +550,29 @@ static int startup(struct serial_state *info) current_ctl_bits = ciab.pra & (SER_DCD | SER_CTS | SER_DSR); info->MCR = 0; - if (info->tty->termios->c_cflag & CBAUD) + if (C_BAUD(tty)) info->MCR = SER_DTR | SER_RTS; rtsdtr_ctrl(info->MCR); - if (info->tty) - clear_bit(TTY_IO_ERROR, &info->tty->flags); + clear_bit(TTY_IO_ERROR, &tty->flags); info->xmit.head = info->xmit.tail = 0; /* * Set up the tty->alt_speed kludge */ - if (info->tty) { - if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) - info->tty->alt_speed = 57600; - if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI) - info->tty->alt_speed = 115200; - if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI) - info->tty->alt_speed = 230400; - if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP) - info->tty->alt_speed = 460800; - } + if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) + tty->alt_speed = 57600; + if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI) + tty->alt_speed = 115200; + if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI) + tty->alt_speed = 230400; + if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP) + tty->alt_speed = 460800; /* * and set the speed of the serial port */ - change_speed(info, NULL); + change_speed(tty, info, NULL); info->flags |= ASYNC_INITIALIZED; local_irq_restore(flags); @@ -591,7 +587,7 @@ errout: * This routine will shutdown a serial port; interrupts are disabled, and * DTR is dropped if the hangup on close termio flag is on. */ -static void shutdown(struct serial_state *info) +static void shutdown(struct tty_struct *tty, struct serial_state *info) { unsigned long flags; struct serial_state *state; @@ -631,12 +627,11 @@ static void shutdown(struct serial_state *info) custom.adkcon = AC_UARTBRK; mb(); - if (!info->tty || (info->tty->termios->c_cflag & HUPCL)) + if (tty->termios->c_cflag & HUPCL) info->MCR &= ~(SER_DTR|SER_RTS); rtsdtr_ctrl(info->MCR); - if (info->tty) - set_bit(TTY_IO_ERROR, &info->tty->flags); + set_bit(TTY_IO_ERROR, &tty->flags); info->flags &= ~ASYNC_INITIALIZED; local_irq_restore(flags); @@ -647,7 +642,7 @@ static void shutdown(struct serial_state *info) * This routine is called to set the UART divisor registers to match * the specified baud rate for a serial port. */ -static void change_speed(struct serial_state *info, +static void change_speed(struct tty_struct *tty, struct serial_state *info, struct ktermios *old_termios) { int quot = 0, baud_base, baud; @@ -655,9 +650,7 @@ static void change_speed(struct serial_state *info, int bits; unsigned long flags; - if (!info->tty || !info->tty->termios) - return; - cflag = info->tty->termios->c_cflag; + cflag = tty->termios->c_cflag; /* Byte size is always 8 bits plus parity bit if requested */ @@ -678,7 +671,7 @@ static void change_speed(struct serial_state *info, #endif /* Determine divisor based on baud rate */ - baud = tty_get_baud_rate(info->tty); + baud = tty_get_baud_rate(tty); if (!baud) baud = 9600; /* B0 transition handled in rs_set_termios */ baud_base = info->baud_base; @@ -695,9 +688,9 @@ static void change_speed(struct serial_state *info, /* If the quotient is zero refuse the change */ if (!quot && old_termios) { /* FIXME: Will need updating for new tty in the end */ - info->tty->termios->c_cflag &= ~CBAUD; - info->tty->termios->c_cflag |= (old_termios->c_cflag & CBAUD); - baud = tty_get_baud_rate(info->tty); + tty->termios->c_cflag &= ~CBAUD; + tty->termios->c_cflag |= (old_termios->c_cflag & CBAUD); + baud = tty_get_baud_rate(tty); if (!baud) baud = 9600; if (baud == 38400 && @@ -742,24 +735,24 @@ static void change_speed(struct serial_state *info, */ info->read_status_mask = UART_LSR_OE | UART_LSR_DR; - if (I_INPCK(info->tty)) + if (I_INPCK(tty)) info->read_status_mask |= UART_LSR_FE | UART_LSR_PE; - if (I_BRKINT(info->tty) || I_PARMRK(info->tty)) + if (I_BRKINT(tty) || I_PARMRK(tty)) info->read_status_mask |= UART_LSR_BI; /* * Characters to ignore */ info->ignore_status_mask = 0; - if (I_IGNPAR(info->tty)) + if (I_IGNPAR(tty)) info->ignore_status_mask |= UART_LSR_PE | UART_LSR_FE; - if (I_IGNBRK(info->tty)) { + if (I_IGNBRK(tty)) { info->ignore_status_mask |= UART_LSR_BI; /* * If we're ignore parity and break indicators, ignore * overruns too. (For real raw support). */ - if (I_IGNPAR(info->tty)) + if (I_IGNPAR(tty)) info->ignore_status_mask |= UART_LSR_OE; } /* @@ -1038,7 +1031,7 @@ static int get_serial_info(struct serial_state *state, return 0; } -static int set_serial_info(struct serial_state *state, +static int set_serial_info(struct tty_struct *tty, struct serial_state *state, struct serial_struct __user * new_info) { struct serial_struct new_serial; @@ -1086,23 +1079,23 @@ static int set_serial_info(struct serial_state *state, state->custom_divisor = new_serial.custom_divisor; state->close_delay = new_serial.close_delay * HZ/100; state->closing_wait = new_serial.closing_wait * HZ/100; - state->tty->low_latency = (state->flags & ASYNC_LOW_LATENCY) ? 1 : 0; + tty->low_latency = (state->flags & ASYNC_LOW_LATENCY) ? 1 : 0; check_and_exit: if (state->flags & ASYNC_INITIALIZED) { if (change_spd) { if ((state->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) - state->tty->alt_speed = 57600; + tty->alt_speed = 57600; if ((state->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI) - state->tty->alt_speed = 115200; + tty->alt_speed = 115200; if ((state->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI) - state->tty->alt_speed = 230400; + tty->alt_speed = 230400; if ((state->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP) - state->tty->alt_speed = 460800; - change_speed(state, NULL); + tty->alt_speed = 460800; + change_speed(tty, state, NULL); } } else - retval = startup(state); + retval = startup(tty, state); tty_unlock(); return retval; } @@ -1256,7 +1249,7 @@ static int rs_ioctl(struct tty_struct *tty, case TIOCGSERIAL: return get_serial_info(info, argp); case TIOCSSERIAL: - return set_serial_info(info, argp); + return set_serial_info(tty, info, argp); case TIOCSERCONFIG: return 0; @@ -1319,7 +1312,7 @@ static void rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios) unsigned long flags; unsigned int cflag = tty->termios->c_cflag; - change_speed(info, old_termios); + change_speed(tty, info, old_termios); /* Handle transition to B0 status */ if ((old_termios->c_cflag & CBAUD) && @@ -1444,7 +1437,7 @@ static void rs_close(struct tty_struct *tty, struct file * filp) */ rs_wait_until_sent(tty, state->timeout); } - shutdown(state); + shutdown(tty, state); rs_flush_buffer(tty); tty_ldisc_flush(tty); @@ -1535,7 +1528,7 @@ static void rs_hangup(struct tty_struct *tty) return; rs_flush_buffer(tty); - shutdown(info); + shutdown(tty, info); info->count = 0; info->flags &= ~ASYNC_NORMAL_ACTIVE; info->tty = NULL; @@ -1696,7 +1689,7 @@ static int rs_open(struct tty_struct *tty, struct file * filp) /* * Start up serial port */ - retval = startup(info); + retval = startup(tty, info); if (retval) { return retval; } |
