diff options
| -rw-r--r-- | arch/sh/Kconfig | 11 | ||||
| -rw-r--r-- | arch/sh/boot/romimage/Makefile | 13 | ||||
| -rw-r--r-- | arch/sh/boot/romimage/head.S | 30 | ||||
| -rw-r--r-- | arch/sh/boot/romimage/mmcif-sh7724.c | 72 | ||||
| -rw-r--r-- | arch/sh/boot/romimage/vmlinux.scr | 1 | ||||
| -rw-r--r-- | arch/sh/include/cpu-sh4/cpu/sh7724.h | 1 | ||||
| -rw-r--r-- | arch/sh/include/mach-common/mach/romimage.h | 10 | ||||
| -rw-r--r-- | arch/sh/include/mach-ecovec24/mach/romimage.h | 27 | ||||
| -rw-r--r-- | arch/sh/include/mach-kfr2r09/mach/romimage.h | 10 |
9 files changed, 171 insertions, 4 deletions
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index c5ee4ce60b57..22d25113d76a 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -776,6 +776,17 @@ config ENTRY_OFFSET default "0x00010000" if PAGE_SIZE_64KB default "0x00000000" +config ROMIMAGE_MMCIF + bool "Include MMCIF loader in romImage (EXPERIMENTAL)" + depends on CPU_SUBTYPE_SH7724 && EXPERIMENTAL + help + Say Y here to include experimental MMCIF loading code in + romImage. With this enabled it is possible to write the romImage + kernel image to an MMC card and boot the kernel straight from + the reset vector. At reset the processor Mask ROM will load the + first part of the romImage which in turn loads the rest the kernel + image to RAM using the MMCIF hardware block. + choice prompt "Kernel command line" optional diff --git a/arch/sh/boot/romimage/Makefile b/arch/sh/boot/romimage/Makefile index f473a24a2d92..2216ee57f251 100644 --- a/arch/sh/boot/romimage/Makefile +++ b/arch/sh/boot/romimage/Makefile @@ -1,16 +1,21 @@ # # linux/arch/sh/boot/romimage/Makefile # -# create an image suitable for burning to flash from zImage +# create an romImage file suitable for burning to flash/mmc from zImage # targets := vmlinux head.o zeropage.bin piggy.o +load-y := 0 -OBJECTS = $(obj)/head.o -LDFLAGS_vmlinux := --oformat $(ld-bfd) -Ttext 0 -e romstart \ +mmcif-load-$(CONFIG_CPU_SUBTYPE_SH7724) := 0xe5200000 # ILRAM +mmcif-obj-$(CONFIG_CPU_SUBTYPE_SH7724) := $(obj)/mmcif-sh7724.o +load-$(CONFIG_ROMIMAGE_MMCIF) := $(mmcif-load-y) +obj-$(CONFIG_ROMIMAGE_MMCIF) := $(mmcif-obj-y) + +LDFLAGS_vmlinux := --oformat $(ld-bfd) -Ttext $(load-y) -e romstart \ -T $(obj)/../../kernel/vmlinux.lds -$(obj)/vmlinux: $(OBJECTS) $(obj)/piggy.o FORCE +$(obj)/vmlinux: $(obj)/head.o $(obj-y) $(obj)/piggy.o FORCE $(call if_changed,ld) @: diff --git a/arch/sh/boot/romimage/head.S b/arch/sh/boot/romimage/head.S index 65b8256d81cb..4671d1b82150 100644 --- a/arch/sh/boot/romimage/head.S +++ b/arch/sh/boot/romimage/head.S @@ -12,6 +12,36 @@ romstart: /* include board specific setup code */ #include <mach/romimage.h> +#ifdef CONFIG_ROMIMAGE_MMCIF + /* load the romImage to above the empty zero page */ + mov.l empty_zero_page_dst, r4 + mov.l empty_zero_page_dst_adj, r5 + add r5, r4 + mov.l bytes_to_load, r5 + mov.l loader_function, r7 + jsr @r7 + mov r4, r15 + + mov.l empty_zero_page_dst, r4 + mov.l empty_zero_page_dst_adj, r5 + add r5, r4 + mov.l loaded_code_offs, r5 + add r5, r4 + jmp @r4 + nop + + .balign 4 +empty_zero_page_dst_adj: + .long PAGE_SIZE +bytes_to_load: + .long end_data - romstart +loader_function: + .long mmcif_loader +loaded_code_offs: + .long loaded_code - romstart +loaded_code: +#endif /* CONFIG_ROMIMAGE_MMCIF */ + /* copy the empty_zero_page contents to where vmlinux expects it */ mova extra_data_pos, r0 mov.l extra_data_size, r1 diff --git a/arch/sh/boot/romimage/mmcif-sh7724.c b/arch/sh/boot/romimage/mmcif-sh7724.c new file mode 100644 index 000000000000..14863d7292cb --- /dev/null +++ b/arch/sh/boot/romimage/mmcif-sh7724.c @@ -0,0 +1,72 @@ +/* + * sh7724 MMCIF loader + * + * Copyright (C) 2010 Magnus Damm + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include <linux/mmc/sh_mmcif.h> +#include <mach/romimage.h> + +#define MMCIF_BASE (void __iomem *)0xa4ca0000 + +#define MSTPCR2 0xa4150038 +#define PTWCR 0xa4050146 +#define PTXCR 0xa4050148 +#define PSELA 0xa405014e +#define PSELE 0xa4050156 +#define HIZCRC 0xa405015c +#define DRVCRA 0xa405018a + +enum { MMCIF_PROGRESS_ENTER, MMCIF_PROGRESS_INIT, + MMCIF_PROGRESS_LOAD, MMCIF_PROGRESS_DONE }; + +/* SH7724 specific MMCIF loader + * + * loads the romImage from an MMC card starting from block 512 + * use the following line to write the romImage to an MMC card + * # dd if=arch/sh/boot/romImage of=/dev/sdx bs=512 seek=512 + */ +asmlinkage void mmcif_loader(unsigned char *buf, unsigned long no_bytes) +{ + mmcif_update_progress(MMCIF_PROGRESS_ENTER); + + /* enable clock to the MMCIF hardware block */ + __raw_writel(__raw_readl(MSTPCR2) & ~0x20000000, MSTPCR2); + + /* setup pins D7-D0 */ + __raw_writew(0x0000, PTWCR); + + /* setup pins MMC_CLK, MMC_CMD */ + __raw_writew(__raw_readw(PTXCR) & ~0x000f, PTXCR); + + /* select D3-D0 pin function */ + __raw_writew(__raw_readw(PSELA) & ~0x2000, PSELA); + + /* select D7-D4 pin function */ + __raw_writew(__raw_readw(PSELE) & ~0x3000, PSELE); + + /* disable Hi-Z for the MMC pins */ + __raw_writew(__raw_readw(HIZCRC) & ~0x0620, HIZCRC); + + /* high drive capability for MMC pins */ + __raw_writew(__raw_readw(DRVCRA) | 0x3000, DRVCRA); + + mmcif_update_progress(MMCIF_PROGRESS_INIT); + + /* setup MMCIF hardware */ + sh_mmcif_boot_init(MMCIF_BASE); + + mmcif_update_progress(MMCIF_PROGRESS_LOAD); + + /* load kernel via MMCIF interface */ + sh_mmcif_boot_slurp(MMCIF_BASE, buf, no_bytes); + + /* disable clock to the MMCIF hardware block */ + __raw_writel(__raw_readl(MSTPCR2) | 0x20000000, MSTPCR2); + + mmcif_update_progress(MMCIF_PROGRESS_DONE); +} diff --git a/arch/sh/boot/romimage/vmlinux.scr b/arch/sh/boot/romimage/vmlinux.scr index ea27298a99a7..590394e2f5f2 100644 --- a/arch/sh/boot/romimage/vmlinux.scr +++ b/arch/sh/boot/romimage/vmlinux.scr @@ -3,5 +3,6 @@ SECTIONS .text : { zero_page_pos = .; *(.data) + end_data = .; } } diff --git a/arch/sh/include/cpu-sh4/cpu/sh7724.h b/arch/sh/include/cpu-sh4/cpu/sh7724.h index fbbf550cc529..4c27b68789b3 100644 --- a/arch/sh/include/cpu-sh4/cpu/sh7724.h +++ b/arch/sh/include/cpu-sh4/cpu/sh7724.h @@ -9,6 +9,7 @@ * MD3: BSC - Area0 Bus Width (16/32-bit) [CS0BCR.9,10] * MD5: BSC - Endian Mode (L: Big, H: Little) [CMNCR.3] * MD8: Test Mode + * BOOT: FBR - Boot Mode (L: MMCIF, H: Area0) */ /* Pin Function Controller: diff --git a/arch/sh/include/mach-common/mach/romimage.h b/arch/sh/include/mach-common/mach/romimage.h index 267e24112d82..08fb42269ecd 100644 --- a/arch/sh/include/mach-common/mach/romimage.h +++ b/arch/sh/include/mach-common/mach/romimage.h @@ -1 +1,11 @@ +#ifdef __ASSEMBLY__ + /* do nothing here by default */ + +#else /* __ASSEMBLY__ */ + +extern inline void mmcif_update_progress(int nr) +{ +} + +#endif /* __ASSEMBLY__ */ diff --git a/arch/sh/include/mach-ecovec24/mach/romimage.h b/arch/sh/include/mach-ecovec24/mach/romimage.h index 1c8787ecb1c1..1dcf5e6c8d83 100644 --- a/arch/sh/include/mach-ecovec24/mach/romimage.h +++ b/arch/sh/include/mach-ecovec24/mach/romimage.h @@ -1,3 +1,5 @@ +#ifdef __ASSEMBLY__ + /* EcoVec board specific boot code: * converts the "partner-jet-script.txt" script into assembly * the assembly code is the first code to be executed in the romImage @@ -18,3 +20,28 @@ .align 2 1 : .long 0xa8000000 2 : + +#else /* __ASSEMBLY__ */ + +/* Ecovec board specific information: + * + * Set the following to enable MMCIF boot from the MMC card in CN12: + * + * DS1.5 = OFF (SH BOOT pin set to L) + * DS2.6 = OFF (Select MMCIF on CN12 instead of SDHI1) + * DS2.7 = ON (Select MMCIF on CN12 instead of SDHI1) + * + */ +#define HIZCRA 0xa4050158 +#define PGDR 0xa405012c + +extern inline void mmcif_update_progress(int nr) +{ + /* disable Hi-Z for LED pins */ + __raw_writew(__raw_readw(HIZCRA) & ~(1 << 1), HIZCRA); + + /* update progress on LED4, LED5, LED6 and LED7 */ + __raw_writeb(1 << (nr - 1), PGDR); +} + +#endif /* __ASSEMBLY__ */ diff --git a/arch/sh/include/mach-kfr2r09/mach/romimage.h b/arch/sh/include/mach-kfr2r09/mach/romimage.h index a110823f2bde..976256a323f2 100644 --- a/arch/sh/include/mach-kfr2r09/mach/romimage.h +++ b/arch/sh/include/mach-kfr2r09/mach/romimage.h @@ -1,3 +1,5 @@ +#ifdef __ASSEMBLY__ + /* kfr2r09 board specific boot code: * converts the "partner-jet-script.txt" script into assembly * the assembly code is the first code to be executed in the romImage @@ -18,3 +20,11 @@ .align 2 1: .long 0xa8000000 2: + +#else /* __ASSEMBLY__ */ + +extern inline void mmcif_update_progress(int nr) +{ +} + +#endif /* __ASSEMBLY__ */ |
