diff options
| -rw-r--r-- | drivers/pci/Kconfig | 3 | ||||
| -rw-r--r-- | drivers/pci/Makefile | 1 | ||||
| -rw-r--r-- | drivers/pci/pci-bridge-emul.c | 408 | ||||
| -rw-r--r-- | drivers/pci/pci-bridge-emul.h | 124 |
4 files changed, 536 insertions, 0 deletions
diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig index 56ff8f6d31fc..4a28e07d4c0e 100644 --- a/drivers/pci/Kconfig +++ b/drivers/pci/Kconfig @@ -98,6 +98,9 @@ config PCI_ECAM config PCI_LOCKLESS_CONFIG bool +config PCI_BRIDGE_EMUL + bool + config PCI_IOV bool "PCI IOV support" depends on PCI diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile index 1b2cfe51e8d7..3e5caf7347e9 100644 --- a/drivers/pci/Makefile +++ b/drivers/pci/Makefile @@ -19,6 +19,7 @@ obj-$(CONFIG_HOTPLUG_PCI) += hotplug/ obj-$(CONFIG_PCI_MSI) += msi.o obj-$(CONFIG_PCI_ATS) += ats.o obj-$(CONFIG_PCI_IOV) += iov.o +obj-$(CONFIG_PCI_BRIDGE_EMUL) += pci-bridge-emul.o obj-$(CONFIG_ACPI) += pci-acpi.o obj-$(CONFIG_PCI_LABEL) += pci-label.o obj-$(CONFIG_X86_INTEL_MID) += pci-mid.o diff --git a/drivers/pci/pci-bridge-emul.c b/drivers/pci/pci-bridge-emul.c new file mode 100644 index 000000000000..129738362d90 --- /dev/null +++ b/drivers/pci/pci-bridge-emul.c @@ -0,0 +1,408 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2018 Marvell + * + * Author: Thomas Petazzoni <thomas.petazzoni@bootlin.com> + * + * This file helps PCI controller drivers implement a fake root port + * PCI bridge when the HW doesn't provide such a root port PCI + * bridge. + * + * It emulates a PCI bridge by providing a fake PCI configuration + * space (and optionally a PCIe capability configuration space) in + * memory. By default the read/write operations simply read and update + * this fake configuration space in memory. However, PCI controller + * drivers can provide through the 'struct pci_sw_bridge_ops' + * structure a set of operations to override or complement this + * default behavior. + */ + +#include <linux/pci.h> +#include "pci-bridge-emul.h" + +#define PCI_BRIDGE_CONF_END PCI_STD_HEADER_SIZEOF +#define PCI_CAP_PCIE_START PCI_BRIDGE_CONF_END +#define PCI_CAP_PCIE_END (PCI_CAP_PCIE_START + PCI_EXP_SLTSTA2 + 2) + +/* + * Initialize a pci_bridge_emul structure to represent a fake PCI + * bridge configuration space. The caller needs to have initialized + * the PCI configuration space with whatever values make sense + * (typically at least vendor, device, revision), the ->ops pointer, + * and optionally ->data and ->has_pcie. + */ +void pci_bridge_emul_init(struct pci_bridge_emul *bridge) +{ + bridge->conf.class_revision |= PCI_CLASS_BRIDGE_PCI << 16; + bridge->conf.header_type = PCI_HEADER_TYPE_BRIDGE; + bridge->conf.cache_line_size = 0x10; + bridge->conf.status = PCI_STATUS_CAP_LIST; + + if (bridge->has_pcie) { + bridge->conf.capabilities_pointer = PCI_CAP_PCIE_START; + bridge->pcie_conf.cap_id = PCI_CAP_ID_EXP; + /* Set PCIe v2, root port, slot support */ + bridge->pcie_conf.cap = PCI_EXP_TYPE_ROOT_PORT << 4 | 2 | + PCI_EXP_FLAGS_SLOT; + } +} + +struct pci_bridge_reg_behavior { + /* Read-only bits */ + u32 ro; + + /* Read-write bits */ + u32 rw; + + /* Write-1-to-clear bits */ + u32 w1c; + + /* Reserved bits (hardwired to 0) */ + u32 rsvd; +}; + +const static struct pci_bridge_reg_behavior pci_regs_behavior[] = { + [PCI_VENDOR_ID / 4] = { .ro = ~0 }, + [PCI_COMMAND / 4] = { + .rw = (PCI_COMMAND_IO | PCI_COMMAND_MEMORY | + PCI_COMMAND_MASTER | PCI_COMMAND_PARITY | + PCI_COMMAND_SERR), + .ro = ((PCI_COMMAND_SPECIAL | PCI_COMMAND_INVALIDATE | + PCI_COMMAND_VGA_PALETTE | PCI_COMMAND_WAIT | + PCI_COMMAND_FAST_BACK) | + (PCI_STATUS_CAP_LIST | PCI_STATUS_66MHZ | + PCI_STATUS_FAST_BACK | PCI_STATUS_DEVSEL_MASK) << 16), + .rsvd = GENMASK(15, 10) | ((BIT(6) | GENMASK(3, 0)) << 16), + .w1c = (PCI_STATUS_PARITY | + PCI_STATUS_SIG_TARGET_ABORT | + PCI_STATUS_REC_TARGET_ABORT | + PCI_STATUS_REC_MASTER_ABORT | + PCI_STATUS_SIG_SYSTEM_ERROR | + PCI_STATUS_DETECTED_PARITY) << 16, + }, + [PCI_CLASS_REVISION / 4] = { .ro = ~0 }, + + /* + * Cache Line Size register: implement as read-only, we do not + * pretend implementing "Memory Write and Invalidate" + * transactions" + * + * Latency Timer Register: implemented as read-only, as "A + * bridge that is not capable of a burst transfer of more than + * two data phases on its primary interface is permitted to + * hardwire the Latency Timer to a value of 16 or less" + * + * Header Type: always read-only + * + * BIST register: implemented as read-only, as "A bridge that + * does not support BIST must implement this register as a + * read-only register that returns 0 when read" + */ + [PCI_CACHE_LINE_SIZE / 4] = { .ro = ~0 }, + + /* + * Base Address registers not used must be implemented as + * read-only registers that return 0 when read. + */ + [PCI_BASE_ADDRESS_0 / 4] = { .ro = ~0 }, + [PCI_BASE_ADDRESS_1 / 4] = { .ro = ~0 }, + + [PCI_PRIMARY_BUS / 4] = { + /* Primary, secondary and subordinate bus are RW */ + .rw = GENMASK(24, 0), + /* Secondary latency is read-only */ + .ro = GENMASK(31, 24), + }, + + [PCI_IO_BASE / 4] = { + /* The high four bits of I/O base/limit are RW */ + .rw = (GENMASK(15, 12) | GENMASK(7, 4)), + + /* The low four bits of I/O base/limit are RO */ + .ro = (((PCI_STATUS_66MHZ | PCI_STATUS_FAST_BACK | + PCI_STATUS_DEVSEL_MASK) << 16) | + GENMASK(11, 8) | GENMASK(3, 0)), + + .w1c = (PCI_STATUS_PARITY | + PCI_STATUS_SIG_TARGET_ABORT | + PCI_STATUS_REC_TARGET_ABORT | + PCI_STATUS_REC_MASTER_ABORT | + PCI_STATUS_SIG_SYSTEM_ERROR | + PCI_STATUS_DETECTED_PARITY) << 16, + + .rsvd = ((BIT(6) | GENMASK(4, 0)) << 16), + }, + + [PCI_MEMORY_BASE / 4] = { + /* The high 12-bits of mem base/limit are RW */ + .rw = GENMASK(31, 20) | GENMASK(15, 4), + + /* The low four bits of mem base/limit are RO */ + .ro = GENMASK(19, 16) | GENMASK(3, 0), + }, + + [PCI_PREF_MEMORY_BASE / 4] = { + /* The high 12-bits of pref mem base/limit are RW */ + .rw = GENMASK(31, 20) | GENMASK(15, 4), + + /* The low four bits of pref mem base/limit are RO */ + .ro = GENMASK(19, 16) | GENMASK(3, 0), + }, + + [PCI_PREF_BASE_UPPER32 / 4] = { + .rw = ~0, + }, + + [PCI_PREF_LIMIT_UPPER32 / 4] = { + .rw = ~0, + }, + + [PCI_IO_BASE_UPPER16 / 4] = { + .rw = ~0, + }, + + [PCI_CAPABILITY_LIST / 4] = { + .ro = GENMASK(7, 0), + .rsvd = GENMASK(31, 8), + }, + + [PCI_ROM_ADDRESS1 / 4] = { + .rw = GENMASK(31, 11) | BIT(0), + .rsvd = GENMASK(10, 1), + }, + + /* + * Interrupt line (bits 7:0) are RW, interrupt pin (bits 15:8) + * are RO, and bridge control (31:16) are a mix of RW, RO, + * reserved and W1C bits + */ + [PCI_INTERRUPT_LINE / 4] = { + /* Interrupt line is RW */ + .rw = (GENMASK(7, 0) | + ((PCI_BRIDGE_CTL_PARITY | + PCI_BRIDGE_CTL_SERR | + PCI_BRIDGE_CTL_ISA | + PCI_BRIDGE_CTL_VGA | + PCI_BRIDGE_CTL_MASTER_ABORT | + PCI_BRIDGE_CTL_BUS_RESET | + BIT(8) | BIT(9) | BIT(11)) << 16)), + + /* Interrupt pin is RO */ + .ro = (GENMASK(15, 8) | ((PCI_BRIDGE_CTL_FAST_BACK) << 16)), + + .w1c = BIT(10) << 16, + + .rsvd = (GENMASK(15, 12) | BIT(4)) << 16, + }, +}; + +const static struct pci_bridge_reg_behavior pcie_cap_regs_behavior[] = { + [PCI_CAP_LIST_ID / 4] = { + /* + * Capability ID, Next Capability Pointer and + * Capabilities register are all read-only. + */ + .ro = ~0, + }, + + [PCI_EXP_DEVCAP / 4] = { + .ro = ~0, + }, + + [PCI_EXP_DEVCTL / 4] = { + /* Device control register is RW */ + .rw = GENMASK(15, 0), + + /* + * Device status register has 4 bits W1C, then 2 bits + * RO, the rest is reserved + */ + .w1c = GENMASK(19, 16), + .ro = GENMASK(20, 19), + .rsvd = GENMASK(31, 21), + }, + + [PCI_EXP_LNKCAP / 4] = { + /* All bits are RO, except bit 23 which is reserved */ + .ro = lower_32_bits(~BIT(23)), + .rsvd = BIT(23), + }, + + [PCI_EXP_LNKCTL / 4] = { + /* + * Link control has bits [1:0] and [11:3] RW, the + * other bits are reserved. + * Link status has bits [13:0] RO, and bits [14:15] + * W1C. + */ + .rw = GENMASK(11, 3) | GENMASK(1, 0), + .ro = GENMASK(13, 0) << 16, + .w1c = GENMASK(15, 14) << 16, + .rsvd = GENMASK(15, 12) | BIT(2), + }, + + [PCI_EXP_SLTCAP / 4] = { + .ro = ~0, + }, + + [PCI_EXP_SLTCTL / 4] = { + /* + * Slot control has bits [12:0] RW, the rest is + * reserved. + * + * Slot status has a mix of W1C and RO bits, as well + * as reserved bits. + */ + .rw = GENMASK(12, 0), + .w1c = (PCI_EXP_SLTSTA_ABP | PCI_EXP_SLTSTA_PFD | + PCI_EXP_SLTSTA_MRLSC | PCI_EXP_SLTSTA_PDC | + PCI_EXP_SLTSTA_CC | PCI_EXP_SLTSTA_DLLSC) << 16, + .ro = (PCI_EXP_SLTSTA_MRLSS | PCI_EXP_SLTSTA_PDS | + PCI_EXP_SLTSTA_EIS) << 16, + .rsvd = GENMASK(15, 12) | (GENMASK(15, 9) << 16), + }, + + [PCI_EXP_RTCTL / 4] = { + /* + * Root control has bits [4:0] RW, the rest is + * reserved. + * + * Root status has bit 0 RO, the rest is reserved. + */ + .rw = (PCI_EXP_RTCTL_SECEE | PCI_EXP_RTCTL_SENFEE | + PCI_EXP_RTCTL_SEFEE | PCI_EXP_RTCTL_PMEIE | + PCI_EXP_RTCTL_CRSSVE), + .ro = PCI_EXP_RTCAP_CRSVIS << 16, + .rsvd = GENMASK(15, 5) | (GENMASK(15, 1) << 16), + }, + + [PCI_EXP_RTSTA / 4] = { + .ro = GENMASK(15, 0) | PCI_EXP_RTSTA_PENDING, + .w1c = PCI_EXP_RTSTA_PME, + .rsvd = GENMASK(31, 18), + }, +}; + +/* + * Should be called by the PCI controller driver when reading the PCI + * configuration space of the fake bridge. It will call back the + * ->ops->read_base or ->ops->read_pcie operations. + */ +int pci_bridge_emul_conf_read(struct pci_bridge_emul *bridge, int where, + int size, u32 *value) +{ + int ret; + int reg = where & ~3; + pci_bridge_emul_read_status_t (*read_op)(struct pci_bridge_emul *bridge, + int reg, u32 *value); + u32 *cfgspace; + const struct pci_bridge_reg_behavior *behavior; + + if (bridge->has_pcie && reg >= PCI_CAP_PCIE_END) { + *value = 0; + return PCIBIOS_SUCCESSFUL; + } + + if (!bridge->has_pcie && reg >= PCI_BRIDGE_CONF_END) { + *value = 0; + return PCIBIOS_SUCCESSFUL; + } + + if (bridge->has_pcie && reg >= PCI_CAP_PCIE_START) { + reg -= PCI_CAP_PCIE_START; + read_op = bridge->ops->read_pcie; + cfgspace = (u32 *) &bridge->pcie_conf; + behavior = pcie_cap_regs_behavior; + } else { + read_op = bridge->ops->read_base; + cfgspace = (u32 *) &bridge->conf; + behavior = pci_regs_behavior; + } + + if (read_op) + ret = read_op(bridge, reg, value); + else + ret = PCI_BRIDGE_EMUL_NOT_HANDLED; + + if (ret == PCI_BRIDGE_EMUL_NOT_HANDLED) + *value = cfgspace[reg / 4]; + + /* + * Make sure we never return any reserved bit with a value + * different from 0. + */ + *value &= ~behavior[reg / 4].rsvd; + + if (size == 1) + *value = (*value >> (8 * (where & 3))) & 0xff; + else if (size == 2) + *value = (*value >> (8 * (where & 3))) & 0xffff; + else if (size != 4) + return PCIBIOS_BAD_REGISTER_NUMBER; + + return PCIBIOS_SUCCESSFUL; +} + +/* + * Should be called by the PCI controller driver when writing the PCI + * configuration space of the fake bridge. It will call back the + * ->ops->write_base or ->ops->write_pcie operations. + */ +int pci_bridge_emul_conf_write(struct pci_bridge_emul *bridge, int where, + int size, u32 value) +{ + int reg = where & ~3; + int mask, ret, old, new, shift; + void (*write_op)(struct pci_bridge_emul *bridge, int reg, + u32 old, u32 new, u32 mask); + u32 *cfgspace; + const struct pci_bridge_reg_behavior *behavior; + + if (bridge->has_pcie && reg >= PCI_CAP_PCIE_END) + return PCIBIOS_SUCCESSFUL; + + if (!bridge->has_pcie && reg >= PCI_BRIDGE_CONF_END) + return PCIBIOS_SUCCESSFUL; + + shift = (where & 0x3) * 8; + + if (size == 4) + mask = 0xffffffff; + else if (size == 2) + mask = 0xffff << shift; + else if (size == 1) + mask = 0xff << shift; + else + return PCIBIOS_BAD_REGISTER_NUMBER; + + ret = pci_bridge_emul_conf_read(bridge, reg, 4, &old); + if (ret != PCIBIOS_SUCCESSFUL) + return ret; + + if (bridge->has_pcie && reg >= PCI_CAP_PCIE_START) { + reg -= PCI_CAP_PCIE_START; + write_op = bridge->ops->write_pcie; + cfgspace = (u32 *) &bridge->pcie_conf; + behavior = pcie_cap_regs_behavior; + } else { + write_op = bridge->ops->write_base; + cfgspace = (u32 *) &bridge->conf; + behavior = pci_regs_behavior; + } + + /* Keep all bits, except the RW bits */ + new = old & (~mask | ~behavior[reg / 4].rw); + + /* Update the value of the RW bits */ + new |= (value << shift) & (behavior[reg / 4].rw & mask); + + /* Clear the W1C bits */ + new &= ~((value << shift) & (behavior[reg / 4].w1c & mask)); + + cfgspace[reg / 4] = new; + + if (write_op) + write_op(bridge, reg, old, new, mask); + + return PCIBIOS_SUCCESSFUL; +} diff --git a/drivers/pci/pci-bridge-emul.h b/drivers/pci/pci-bridge-emul.h new file mode 100644 index 000000000000..9d510ccf738b --- /dev/null +++ b/drivers/pci/pci-bridge-emul.h @@ -0,0 +1,124 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __PCI_BRIDGE_EMUL_H__ +#define __PCI_BRIDGE_EMUL_H__ + +#include <linux/kernel.h> + +/* PCI configuration space of a PCI-to-PCI bridge. */ +struct pci_bridge_emul_conf { + u16 vendor; + u16 device; + u16 command; + u16 status; + u32 class_revision; + u8 cache_line_size; + u8 latency_timer; + u8 header_type; + u8 bist; + u32 bar[2]; + u8 primary_bus; + u8 secondary_bus; + u8 subordinate_bus; + u8 secondary_latency_timer; + u8 iobase; + u8 iolimit; + u16 secondary_status; + u16 membase; + u16 memlimit; + u16 pref_mem_base; + u16 pref_mem_limit; + u32 prefbaseupper; + u32 preflimitupper; + u16 iobaseupper; + u16 iolimitupper; + u8 capabilities_pointer; + u8 reserve[3]; + u32 romaddr; + u8 intline; + u8 intpin; + u16 bridgectrl; +}; + +/* PCI configuration space of the PCIe capabilities */ +struct pci_bridge_emul_pcie_conf { + u8 cap_id; + u8 next; + u16 cap; + u32 devcap; + u16 devctl; + u16 devsta; + u32 lnkcap; + u16 lnkctl; + u16 lnksta; + u32 slotcap; + u16 slotctl; + u16 slotsta; + u16 rootctl; + u16 rsvd; + u32 rootsta; + u32 devcap2; + u16 devctl2; + u16 devsta2; + u32 lnkcap2; + u16 lnkctl2; + u16 lnksta2; + u32 slotcap2; + u16 slotctl2; + u16 slotsta2; +}; + +struct pci_bridge_emul; + +typedef enum { PCI_BRIDGE_EMUL_HANDLED, + PCI_BRIDGE_EMUL_NOT_HANDLED } pci_bridge_emul_read_status_t; + +struct pci_bridge_emul_ops { + /* + * Called when reading from the regular PCI bridge + * configuration space. Return PCI_BRIDGE_EMUL_HANDLED when the + * operation has handled the read operation and filled in the + * *value, or PCI_BRIDGE_EMUL_NOT_HANDLED when the read should + * be emulated by the common code by reading from the + * in-memory copy of the configuration space. + */ + pci_bridge_emul_read_status_t (*read_base)(struct pci_bridge_emul *bridge, + int reg, u32 *value); + + /* + * Same as ->read_base(), except it is for reading from the + * PCIe capability configuration space. + */ + pci_bridge_emul_read_status_t (*read_pcie)(struct pci_bridge_emul *bridge, + int reg, u32 *value); + /* + * Called when writing to the regular PCI bridge configuration + * space. old is the current value, new is the new value being + * written, and mask indicates which parts of the value are + * being changed. + */ + void (*write_base)(struct pci_bridge_emul *bridge, int reg, + u32 old, u32 new, u32 mask); + + /* + * Same as ->write_base(), except it is for writing from the + * PCIe capability configuration space. + */ + void (*write_pcie)(struct pci_bridge_emul *bridge, int reg, + u32 old, u32 new, u32 mask); +}; + +struct pci_bridge_emul { + struct pci_bridge_emul_conf conf; + struct pci_bridge_emul_pcie_conf pcie_conf; + struct pci_bridge_emul_ops *ops; + void *data; + bool has_pcie; +}; + +void pci_bridge_emul_init(struct pci_bridge_emul *bridge); +int pci_bridge_emul_conf_read(struct pci_bridge_emul *bridge, int where, + int size, u32 *value); +int pci_bridge_emul_conf_write(struct pci_bridge_emul *bridge, int where, + int size, u32 value); + +#endif /* __PCI_BRIDGE_EMUL_H__ */ |
