diff options
| -rw-r--r-- | arch/arm/mach-omap2/usb-host.c | 195 | ||||
| -rw-r--r-- | arch/arm/plat-omap/include/plat/usb.h | 2 |
2 files changed, 183 insertions, 14 deletions
diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c index b04ce6f8f013..ab0638208748 100644 --- a/arch/arm/mach-omap2/usb-host.c +++ b/arch/arm/mach-omap2/usb-host.c @@ -6,6 +6,7 @@ * * Copyright (C) 2007-2011 Texas Instruments * Author: Vikram Pandita <vikram.pandita@ti.com> + * Author: Keshava Munegowda <keshava_mgowda@ti.com> * * Generalization by: * Felipe Balbi <balbi@ti.com> @@ -19,7 +20,7 @@ #include <linux/errno.h> #include <linux/delay.h> #include <linux/platform_device.h> -#include <linux/clk.h> +#include <linux/slab.h> #include <linux/dma-mapping.h> #include <asm/io.h> @@ -30,7 +31,7 @@ #include "mux.h" -#if defined(CONFIG_USB_EHCI_HCD) || defined(CONFIG_USB_EHCI_HCD_MODULE) +#ifdef CONFIG_MFD_OMAP_USB_HOST static struct resource ehci_resources[] = { { @@ -361,17 +362,6 @@ void __init usb_ehci_init(const struct usbhs_omap_board_data *pdata) } } -#else - -void __init usb_ehci_init(const struct usbhs_omap_board_data *pdata) - -{ -} - -#endif /* CONFIG_USB_EHCI_HCD */ - -#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) - static struct resource ohci_resources[] = { { .name = "ohci", @@ -508,6 +498,77 @@ static void setup_ohci_io_mux(const enum usbhs_omap_port_mode *port_mode) } } +static void setup_4430ohci_io_mux(const enum usbhs_omap_port_mode *port_mode) +{ + switch (port_mode[0]) { + case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0: + case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM: + case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0: + case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM: + omap_mux_init_signal("usbb1_mm_rxdp", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("usbb1_mm_rxdm", + OMAP_PIN_INPUT_PULLDOWN); + + case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM: + case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM: + omap_mux_init_signal("usbb1_mm_rxrcv", + OMAP_PIN_INPUT_PULLDOWN); + + case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0: + case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0: + omap_mux_init_signal("usbb1_mm_txen", + OMAP_PIN_INPUT_PULLDOWN); + + + case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0: + case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM: + omap_mux_init_signal("usbb1_mm_txdat", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("usbb1_mm_txse0", + OMAP_PIN_INPUT_PULLDOWN); + break; + + case OMAP_USBHS_PORT_MODE_UNUSED: + default: + break; + } + + switch (port_mode[1]) { + case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0: + case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM: + case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0: + case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM: + omap_mux_init_signal("usbb2_mm_rxdp", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("usbb2_mm_rxdm", + OMAP_PIN_INPUT_PULLDOWN); + + case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM: + case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM: + omap_mux_init_signal("usbb2_mm_rxrcv", + OMAP_PIN_INPUT_PULLDOWN); + + case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0: + case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0: + omap_mux_init_signal("usbb2_mm_txen", + OMAP_PIN_INPUT_PULLDOWN); + + + case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0: + case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM: + omap_mux_init_signal("usbb2_mm_txdat", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("usbb2_mm_txse0", + OMAP_PIN_INPUT_PULLDOWN); + break; + + case OMAP_USBHS_PORT_MODE_UNUSED: + default: + break; + } +} + void __init usb_ohci_init(const struct usbhs_omap_board_data *pdata) { platform_device_add_data(&ohci_device, pdata, sizeof(*pdata)); @@ -522,10 +583,116 @@ void __init usb_ohci_init(const struct usbhs_omap_board_data *pdata) } } +#define OMAP_USBHS_DEVICE "usbhs-omap" + +static struct resource usbhs_resources[] = { + { + .name = "uhh", + .flags = IORESOURCE_MEM, + }, + { + .name = "tll", + .flags = IORESOURCE_MEM, + }, + { + .name = "ehci", + .flags = IORESOURCE_MEM, + }, + { + .name = "ehci-irq", + .flags = IORESOURCE_IRQ, + }, + { + .name = "ohci", + .flags = IORESOURCE_MEM, + }, + { + .name = "ohci-irq", + .flags = IORESOURCE_IRQ, + } +}; + +static struct platform_device usbhs_device = { + .name = OMAP_USBHS_DEVICE, + .id = 0, + .num_resources = ARRAY_SIZE(usbhs_resources), + .resource = usbhs_resources, +}; + +static struct usbhs_omap_platform_data usbhs_data; +static struct ehci_hcd_omap_platform_data ehci_data; +static struct ohci_hcd_omap_platform_data ohci_data; + +void __init usbhs_init(const struct usbhs_omap_board_data *pdata) +{ + int i; + + for (i = 0; i < OMAP3_HS_USB_PORTS; i++) { + usbhs_data.port_mode[i] = pdata->port_mode[i]; + ohci_data.port_mode[i] = pdata->port_mode[i]; + ehci_data.port_mode[i] = pdata->port_mode[i]; + ehci_data.reset_gpio_port[i] = pdata->reset_gpio_port[i]; + ehci_data.regulator[i] = pdata->regulator[i]; + } + ehci_data.phy_reset = pdata->phy_reset; + ohci_data.es2_compatibility = pdata->es2_compatibility; + usbhs_data.ehci_data = &ehci_data; + usbhs_data.ohci_data = &ohci_data; + + if (cpu_is_omap34xx()) { + usbhs_resources[0].start = OMAP34XX_UHH_CONFIG_BASE; + usbhs_resources[0].end = OMAP34XX_UHH_CONFIG_BASE + SZ_1K - 1; + usbhs_resources[1].start = OMAP34XX_USBTLL_BASE; + usbhs_resources[1].end = OMAP34XX_USBTLL_BASE + SZ_4K - 1; + usbhs_resources[2].start = OMAP34XX_EHCI_BASE; + usbhs_resources[2].end = OMAP34XX_EHCI_BASE + SZ_1K - 1; + usbhs_resources[3].start = INT_34XX_EHCI_IRQ; + usbhs_resources[4].start = OMAP34XX_OHCI_BASE; + usbhs_resources[4].end = OMAP34XX_OHCI_BASE + SZ_1K - 1; + usbhs_resources[5].start = INT_34XX_OHCI_IRQ; + setup_ehci_io_mux(pdata->port_mode); + setup_ohci_io_mux(pdata->port_mode); + } else if (cpu_is_omap44xx()) { + usbhs_resources[0].start = OMAP44XX_UHH_CONFIG_BASE; + usbhs_resources[0].end = OMAP44XX_UHH_CONFIG_BASE + SZ_1K - 1; + usbhs_resources[1].start = OMAP44XX_USBTLL_BASE; + usbhs_resources[1].end = OMAP44XX_USBTLL_BASE + SZ_4K - 1; + usbhs_resources[2].start = OMAP44XX_HSUSB_EHCI_BASE; + usbhs_resources[2].end = OMAP44XX_HSUSB_EHCI_BASE + SZ_1K - 1; + usbhs_resources[3].start = OMAP44XX_IRQ_EHCI; + usbhs_resources[4].start = OMAP44XX_HSUSB_OHCI_BASE; + usbhs_resources[4].end = OMAP44XX_HSUSB_OHCI_BASE + SZ_1K - 1; + usbhs_resources[5].start = OMAP44XX_IRQ_OHCI; + setup_4430ehci_io_mux(pdata->port_mode); + setup_4430ohci_io_mux(pdata->port_mode); + } + + if (platform_device_add_data(&usbhs_device, + &usbhs_data, sizeof(usbhs_data)) < 0) { + printk(KERN_ERR "USBHS platform_device_add_data failed\n"); + goto init_end; + } + + if (platform_device_register(&usbhs_device) < 0) + printk(KERN_ERR "USBHS platform_device_register failed\n"); + +init_end: + return; +} + #else +void __init usbhs_init(const struct usbhs_omap_board_data *pdata) +{ +} + void __init usb_ohci_init(const struct usbhs_omap_board_data *pdata) { } -#endif /* CONFIG_USB_OHCI_HCD */ +void __init usb_ehci_init(const struct usbhs_omap_board_data *pdata) +{ +} +#endif + + diff --git a/arch/arm/plat-omap/include/plat/usb.h b/arch/arm/plat-omap/include/plat/usb.h index 5dd27764eb6f..4c8bdb835fae 100644 --- a/arch/arm/plat-omap/include/plat/usb.h +++ b/arch/arm/plat-omap/include/plat/usb.h @@ -102,6 +102,8 @@ extern void usb_ehci_init(const struct usbhs_omap_board_data *pdata); extern void usb_ohci_init(const struct usbhs_omap_board_data *pdata); +extern void usbhs_init(const struct usbhs_omap_board_data *pdata); + extern int omap_usbhs_enable(struct device *dev); extern void omap_usbhs_disable(struct device *dev); |
