diff options
| -rw-r--r-- | Documentation/devicetree/bindings/mailbox/mtk-gce.txt | 57 | ||||
| -rw-r--r-- | include/dt-bindings/gce/mt8173-gce.h | 44 |
2 files changed, 101 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/mailbox/mtk-gce.txt b/Documentation/devicetree/bindings/mailbox/mtk-gce.txt new file mode 100644 index 000000000000..7d72b21c9e94 --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/mtk-gce.txt @@ -0,0 +1,57 @@ +MediaTek GCE +=============== + +The Global Command Engine (GCE) is used to help read/write registers with +critical time limitation, such as updating display configuration during the +vblank. The GCE can be used to implement the Command Queue (CMDQ) driver. + +CMDQ driver uses mailbox framework for communication. Please refer to +mailbox.txt for generic information about mailbox device-tree bindings. + +Required properties: +- compatible: Must be "mediatek,mt8173-gce" +- reg: Address range of the GCE unit +- interrupts: The interrupt signal from the GCE block +- clock: Clocks according to the common clock binding +- clock-names: Must be "gce" to stand for GCE clock +- #mbox-cells: Should be 3. + <&phandle channel priority atomic_exec> + phandle: Label name of a gce node. + channel: Channel of mailbox. Be equal to the thread id of GCE. + priority: Priority of GCE thread. + atomic_exec: GCE processing continuous packets of commands in atomic + way. + +Required properties for a client device: +- mboxes: Client use mailbox to communicate with GCE, it should have this + property and list of phandle, mailbox specifiers. +- mediatek,gce-subsys: u32, specify the sub-system id which is corresponding + to the register address. + +Some vaules of properties are defined in 'dt-bindings/gce/mt8173-gce.h'. Such as +sub-system ids, thread priority, event ids. + +Example: + + gce: gce@10212000 { + compatible = "mediatek,mt8173-gce"; + reg = <0 0x10212000 0 0x1000>; + interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_LOW>; + clocks = <&infracfg CLK_INFRA_GCE>; + clock-names = "gce"; + thread-num = CMDQ_THR_MAX_COUNT; + #mbox-cells = <3>; + }; + +Example for a client device: + + mmsys: clock-controller@14000000 { + compatible = "mediatek,mt8173-mmsys"; + mboxes = <&gce 0 CMDQ_THR_PRIO_LOWEST 1>, + <&gce 1 CMDQ_THR_PRIO_LOWEST 1>; + mediatek,gce-subsys = <SUBSYS_1400XXXX>; + mutex-event-eof = <CMDQ_EVENT_MUTEX0_STREAM_EOF + CMDQ_EVENT_MUTEX1_STREAM_EOF>; + + ... + }; diff --git a/include/dt-bindings/gce/mt8173-gce.h b/include/dt-bindings/gce/mt8173-gce.h new file mode 100644 index 000000000000..ffcf94ba96c6 --- /dev/null +++ b/include/dt-bindings/gce/mt8173-gce.h @@ -0,0 +1,44 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2018 MediaTek Inc. + * Author: Houlong Wei <houlong.wei@mediatek.com> + * + */ + +#ifndef _DT_BINDINGS_GCE_MT8173_H +#define _DT_BINDINGS_GCE_MT8173_H + +/* GCE HW thread priority */ +#define CMDQ_THR_PRIO_LOWEST 0 +#define CMDQ_THR_PRIO_HIGHEST 1 + +/* GCE SUBSYS */ +#define SUBSYS_1400XXXX 1 +#define SUBSYS_1401XXXX 2 +#define SUBSYS_1402XXXX 3 + +/* GCE HW EVENT */ +#define CMDQ_EVENT_DISP_OVL0_SOF 11 +#define CMDQ_EVENT_DISP_OVL1_SOF 12 +#define CMDQ_EVENT_DISP_RDMA0_SOF 13 +#define CMDQ_EVENT_DISP_RDMA1_SOF 14 +#define CMDQ_EVENT_DISP_RDMA2_SOF 15 +#define CMDQ_EVENT_DISP_WDMA0_SOF 16 +#define CMDQ_EVENT_DISP_WDMA1_SOF 17 +#define CMDQ_EVENT_DISP_OVL0_EOF 39 +#define CMDQ_EVENT_DISP_OVL1_EOF 40 +#define CMDQ_EVENT_DISP_RDMA0_EOF 41 +#define CMDQ_EVENT_DISP_RDMA1_EOF 42 +#define CMDQ_EVENT_DISP_RDMA2_EOF 43 +#define CMDQ_EVENT_DISP_WDMA0_EOF 44 +#define CMDQ_EVENT_DISP_WDMA1_EOF 45 +#define CMDQ_EVENT_MUTEX0_STREAM_EOF 53 +#define CMDQ_EVENT_MUTEX1_STREAM_EOF 54 +#define CMDQ_EVENT_MUTEX2_STREAM_EOF 55 +#define CMDQ_EVENT_MUTEX3_STREAM_EOF 56 +#define CMDQ_EVENT_MUTEX4_STREAM_EOF 57 +#define CMDQ_EVENT_DISP_RDMA0_UNDERRUN 63 +#define CMDQ_EVENT_DISP_RDMA1_UNDERRUN 64 +#define CMDQ_EVENT_DISP_RDMA2_UNDERRUN 65 + +#endif |
