i915: add suspend/resume support

Add suspend/resume support to the i915 driver.  Moves some of the
initialization into the driver load routine, and fixes up places where we
assumed no dev_private existed in some of the cleanup paths.  This allows
us to suspend/resume properly even if X isn't running.

Signed-off-by: Dave Airlie <airlied@linux.ie>

4 files changed, 1309 insertions, 57 deletions

diff --git a/drivers/char/drm/drm_bufs.c b/drivers/char/drm/drm_bufs.c
index d65e75d405fa..07b774fa3f38 100644
--- a/drivers/char/drm/drm_bufs.c
+++ b/drivers/char/drm/drm_bufs.c
@@ -429,6 +429,7 @@ int drm_rmmap(struct drm_device *dev, drm_local_map_t *map)
 
 	return ret;
 }
+EXPORT_SYMBOL(drm_rmmap);
 
 /* The rmmap ioctl appears to be unnecessary.  All mappings are torn down on
  * the last close of the device, and this is necessary for cleanup when things
diff --git a/drivers/char/drm/i915_dma.c b/drivers/char/drm/i915_dma.c
index 842db3233e9e..b8db9652e9dd 100644
--- a/drivers/char/drm/i915_dma.c
+++ b/drivers/char/drm/i915_dma.c
@@ -31,17 +31,6 @@
 #include "i915_drm.h"
 #include "i915_drv.h"
 
-#define IS_I965G(dev) (dev->pci_device == 0x2972 || \
-		       dev->pci_device == 0x2982 || \
-		       dev->pci_device == 0x2992 || \
-		       dev->pci_device == 0x29A2 || \
-		       dev->pci_device == 0x2A02 || \
-		       dev->pci_device == 0x2A12)
-
-#define IS_G33(dev) (dev->pci_device == 0x29b2 || \
-		     dev->pci_device == 0x29c2 || \
-		     dev->pci_device == 0x29d2)
-
 /* Really want an OS-independent resettable timer.  Would like to have
  * this loop run for (eg) 3 sec, but have the timer reset every time
  * the head pointer changes, so that EBUSY only happens if the ring
@@ -90,6 +79,7 @@ void i915_kernel_lost_context(struct drm_device * dev)
 
 static int i915_dma_cleanup(struct drm_device * dev)
 {
+	drm_i915_private_t *dev_priv = dev->dev_private;
 	/* Make sure interrupts are disabled here because the uninstall ioctl
 	 * may not have been called from userspace and after dev_private
 	 * is freed, it's too late.
@@ -97,52 +87,42 @@ static int i915_dma_cleanup(struct drm_device * dev)
 	if (dev->irq)
 		drm_irq_uninstall(dev);
 
-	if (dev->dev_private) {
-		drm_i915_private_t *dev_priv =
-		    (drm_i915_private_t *) dev->dev_private;
-
-		if (dev_priv->ring.virtual_start) {
-			drm_core_ioremapfree(&dev_priv->ring.map, dev);
-		}
-
-		if (dev_priv->status_page_dmah) {
-			drm_pci_free(dev, dev_priv->status_page_dmah);
-			/* Need to rewrite hardware status page */
-			I915_WRITE(0x02080, 0x1ffff000);
-		}
-
-		if (dev_priv->status_gfx_addr) {
-			dev_priv->status_gfx_addr = 0;
-			drm_core_ioremapfree(&dev_priv->hws_map, dev);
-			I915_WRITE(0x2080, 0x1ffff000);
-		}
+	if (dev_priv->ring.virtual_start) {
+		drm_core_ioremapfree(&dev_priv->ring.map, dev);
+		dev_priv->ring.virtual_start = 0;
+		dev_priv->ring.map.handle = 0;
+		dev_priv->ring.map.size = 0;
+	}
 
-		drm_free(dev->dev_private, sizeof(drm_i915_private_t),
-			 DRM_MEM_DRIVER);
+	if (dev_priv->status_page_dmah) {
+		drm_pci_free(dev, dev_priv->status_page_dmah);
+		dev_priv->status_page_dmah = NULL;
+		/* Need to rewrite hardware status page */
+		I915_WRITE(0x02080, 0x1ffff000);
+	}
 
-		dev->dev_private = NULL;
+	if (dev_priv->status_gfx_addr) {
+		dev_priv->status_gfx_addr = 0;
+		drm_core_ioremapfree(&dev_priv->hws_map, dev);
+		I915_WRITE(0x2080, 0x1ffff000);
 	}
 
 	return 0;
 }
 
-static int i915_initialize(struct drm_device * dev,
-			   drm_i915_private_t * dev_priv,
-			   drm_i915_init_t * init)
+static int i915_initialize(struct drm_device * dev, drm_i915_init_t * init)
 {
-	memset(dev_priv, 0, sizeof(drm_i915_private_t));
+	drm_i915_private_t *dev_priv = dev->dev_private;
 
 	dev_priv->sarea = drm_getsarea(dev);
 	if (!dev_priv->sarea) {
 		DRM_ERROR("can not find sarea!\n");
-		dev->dev_private = (void *)dev_priv;
 		i915_dma_cleanup(dev);
 		return -EINVAL;
 	}
 
 	dev_priv->mmio_map = drm_core_findmap(dev, init->mmio_offset);
 	if (!dev_priv->mmio_map) {
-		dev->dev_private = (void *)dev_priv;
 		i915_dma_cleanup(dev);
 		DRM_ERROR("can not find mmio map!\n");
 		return -EINVAL;
@@ -165,7 +145,6 @@ static int i915_initialize(struct drm_device * dev,
 	drm_core_ioremap(&dev_priv->ring.map, dev);
 
 	if (dev_priv->ring.map.handle == NULL) {
-		dev->dev_private = (void *)dev_priv;
 		i915_dma_cleanup(dev);
 		DRM_ERROR("can not ioremap virtual address for"
 			  " ring buffer\n");
@@ -197,7 +176,6 @@ static int i915_initialize(struct drm_device * dev,
 			drm_pci_alloc(dev, PAGE_SIZE, PAGE_SIZE, 0xffffffff);
 
 		if (!dev_priv->status_page_dmah) {
-			dev->dev_private = (void *)dev_priv;
 			i915_dma_cleanup(dev);
 			DRM_ERROR("Can not allocate hardware status page\n");
 			return -ENOMEM;
@@ -209,7 +187,6 @@ static int i915_initialize(struct drm_device * dev,
 		I915_WRITE(0x02080, dev_priv->dma_status_page);
 	}
 	DRM_DEBUG("Enabled hardware status page\n");
-	dev->dev_private = (void *)dev_priv;
 	return 0;
 }
 
@@ -254,17 +231,12 @@ static int i915_dma_resume(struct drm_device * dev)
 static int i915_dma_init(struct drm_device *dev, void *data,
 			 struct drm_file *file_priv)
 {
-	drm_i915_private_t *dev_priv;
 	drm_i915_init_t *init = data;
 	int retcode = 0;
 
 	switch (init->func) {
 	case I915_INIT_DMA:
-		dev_priv = drm_alloc(sizeof(drm_i915_private_t),
-				     DRM_MEM_DRIVER);
-		if (dev_priv == NULL)
-			return -ENOMEM;
-		retcode = i915_initialize(dev, dev_priv, init);
+		retcode = i915_initialize(dev, init);
 		break;
 	case I915_CLEANUP_DMA:
 		retcode = i915_dma_cleanup(dev);
@@ -765,7 +737,6 @@ static int i915_set_status_page(struct drm_device *dev, void *data,
 
 	drm_core_ioremap(&dev_priv->hws_map, dev);
 	if (dev_priv->hws_map.handle == NULL) {
-		dev->dev_private = (void *)dev_priv;
 		i915_dma_cleanup(dev);
 		dev_priv->status_gfx_addr = 0;
 		DRM_ERROR("can not ioremap virtual address for"
@@ -784,6 +755,10 @@ static int i915_set_status_page(struct drm_device *dev, void *data,
 
 int i915_driver_load(struct drm_device *dev, unsigned long flags)
 {
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	unsigned long base, size;
+	int ret = 0, mmio_bar = IS_I9XX(dev) ? 0 : 1;
+
 	/* i915 has 4 more counters */
 	dev->counters += 4;
 	dev->types[6] = _DRM_STAT_IRQ;
@@ -791,24 +766,50 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
 	dev->types[8] = _DRM_STAT_SECONDARY;
 	dev->types[9] = _DRM_STAT_DMA;
 
+	dev_priv = drm_alloc(sizeof(drm_i915_private_t), DRM_MEM_DRIVER);
+	if (dev_priv == NULL)
+		return -ENOMEM;
+
+	memset(dev_priv, 0, sizeof(drm_i915_private_t));
+
+	dev->dev_private = (void *)dev_priv;
+
+	/* Add register map (needed for suspend/resume) */
+	base = drm_get_resource_start(dev, mmio_bar);
+	size = drm_get_resource_len(dev, mmio_bar);
+
+	ret = drm_addmap(dev, base, size, _DRM_REGISTERS, _DRM_KERNEL,
+			 &dev_priv->mmio_map);
+	return ret;
+}
+
+int i915_driver_unload(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	if (dev_priv->mmio_map)
+		drm_rmmap(dev, dev_priv->mmio_map);
+
+	drm_free(dev->dev_private, sizeof(drm_i915_private_t),
+		 DRM_MEM_DRIVER);
+
 	return 0;
 }
 
 void i915_driver_lastclose(struct drm_device * dev)
 {
-	if (dev->dev_private) {
-		drm_i915_private_t *dev_priv = dev->dev_private;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+
+	if (dev_priv->agp_heap)
 		i915_mem_takedown(&(dev_priv->agp_heap));
-	}
+
 	i915_dma_cleanup(dev);
 }
 
 void i915_driver_preclose(struct drm_device * dev, struct drm_file *file_priv)
 {
-	if (dev->dev_private) {
-		drm_i915_private_t *dev_priv = dev->dev_private;
-		i915_mem_release(dev, file_priv, dev_priv->agp_heap);
-	}
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	i915_mem_release(dev, file_priv, dev_priv->agp_heap);
 }
 
 struct drm_ioctl_desc i915_ioctls[] = {
diff --git a/drivers/char/drm/i915_drv.c b/drivers/char/drm/i915_drv.c
index 63b667538e08..d745f3fd6fbf 100644
--- a/drivers/char/drm/i915_drv.c
+++ b/drivers/char/drm/i915_drv.c
@@ -38,6 +38,465 @@ static struct pci_device_id pciidlist[] = {
 	i915_PCI_IDS
 };
 
+enum pipe {
+    PIPE_A = 0,
+    PIPE_B,
+};
+
+static bool i915_pipe_enabled(struct drm_device *dev, enum pipe pipe)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	if (pipe == PIPE_A)
+		return (I915_READ(DPLL_A) & DPLL_VCO_ENABLE);
+	else
+		return (I915_READ(DPLL_B) & DPLL_VCO_ENABLE);
+}
+
+static void i915_save_palette(struct drm_device *dev, enum pipe pipe)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	unsigned long reg = (pipe == PIPE_A ? PALETTE_A : PALETTE_B);
+	u32 *array;
+	int i;
+
+	if (!i915_pipe_enabled(dev, pipe))
+		return;
+
+	if (pipe == PIPE_A)
+		array = dev_priv->save_palette_a;
+	else
+		array = dev_priv->save_palette_b;
+
+	for(i = 0; i < 256; i++)
+		array[i] = I915_READ(reg + (i << 2));
+}
+
+static void i915_restore_palette(struct drm_device *dev, enum pipe pipe)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	unsigned long reg = (pipe == PIPE_A ? PALETTE_A : PALETTE_B);
+	u32 *array;
+	int i;
+
+	if (!i915_pipe_enabled(dev, pipe))
+		return;
+
+	if (pipe == PIPE_A)
+		array = dev_priv->save_palette_a;
+	else
+		array = dev_priv->save_palette_b;
+
+	for(i = 0; i < 256; i++)
+		I915_WRITE(reg + (i << 2), array[i]);
+}
+
+static u8 i915_read_indexed(u16 index_port, u16 data_port, u8 reg)
+{
+	outb(reg, index_port);
+	return inb(data_port);
+}
+
+static u8 i915_read_ar(u16 st01, u8 reg, u16 palette_enable)
+{
+	inb(st01);
+	outb(palette_enable | reg, VGA_AR_INDEX);
+	return inb(VGA_AR_DATA_READ);
+}
+
+static void i915_write_ar(u8 st01, u8 reg, u8 val, u16 palette_enable)
+{
+	inb(st01);
+	outb(palette_enable | reg, VGA_AR_INDEX);
+	outb(val, VGA_AR_DATA_WRITE);
+}
+
+static void i915_write_indexed(u16 index_port, u16 data_port, u8 reg, u8 val)
+{
+	outb(reg, index_port);
+	outb(val, data_port);
+}
+
+static void i915_save_vga(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	int i;
+	u16 cr_index, cr_data, st01;
+
+	/* VGA color palette registers */
+	dev_priv->saveDACMASK = inb(VGA_DACMASK);
+	/* DACCRX automatically increments during read */
+	outb(0, VGA_DACRX);
+	/* Read 3 bytes of color data from each index */
+	for (i = 0; i < 256 * 3; i++)
+		dev_priv->saveDACDATA[i] = inb(VGA_DACDATA);
+
+	/* MSR bits */
+	dev_priv->saveMSR = inb(VGA_MSR_READ);
+	if (dev_priv->saveMSR & VGA_MSR_CGA_MODE) {
+		cr_index = VGA_CR_INDEX_CGA;
+		cr_data = VGA_CR_DATA_CGA;
+		st01 = VGA_ST01_CGA;
+	} else {
+		cr_index = VGA_CR_INDEX_MDA;
+		cr_data = VGA_CR_DATA_MDA;
+		st01 = VGA_ST01_MDA;
+	}
+
+	/* CRT controller regs */
+	i915_write_indexed(cr_index, cr_data, 0x11,
+			   i915_read_indexed(cr_index, cr_data, 0x11) &
+			   (~0x80));
+	for (i = 0; i < 0x24; i++)
+		dev_priv->saveCR[i] =
+			i915_read_indexed(cr_index, cr_data, i);
+	/* Make sure we don't turn off CR group 0 writes */
+	dev_priv->saveCR[0x11] &= ~0x80;
+
+	/* Attribute controller registers */
+	inb(st01);
+	dev_priv->saveAR_INDEX = inb(VGA_AR_INDEX);
+	for (i = 0; i < 20; i++)
+		dev_priv->saveAR[i] = i915_read_ar(st01, i, 0);
+	inb(st01);
+	outb(dev_priv->saveAR_INDEX, VGA_AR_INDEX);
+
+	/* Graphics controller registers */
+	for (i = 0; i < 9; i++)
+		dev_priv->saveGR[i] =
+			i915_read_indexed(VGA_GR_INDEX, VGA_GR_DATA, i);
+
+	dev_priv->saveGR[0x10] =
+		i915_read_indexed(VGA_GR_INDEX, VGA_GR_DATA, 0x10);
+	dev_priv->saveGR[0x11] =
+		i915_read_indexed(VGA_GR_INDEX, VGA_GR_DATA, 0x11);
+	dev_priv->saveGR[0x18] =
+		i915_read_indexed(VGA_GR_INDEX, VGA_GR_DATA, 0x18);
+
+	/* Sequencer registers */
+	for (i = 0; i < 8; i++)
+		dev_priv->saveSR[i] =
+			i915_read_indexed(VGA_SR_INDEX, VGA_SR_DATA, i);
+}
+
+static void i915_restore_vga(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	int i;
+	u16 cr_index, cr_data, st01;
+
+	/* MSR bits */
+	outb(dev_priv->saveMSR, VGA_MSR_WRITE);
+	if (dev_priv->saveMSR & VGA_MSR_CGA_MODE) {
+		cr_index = VGA_CR_INDEX_CGA;
+		cr_data = VGA_CR_DATA_CGA;
+		st01 = VGA_ST01_CGA;
+	} else {
+		cr_index = VGA_CR_INDEX_MDA;
+		cr_data = VGA_CR_DATA_MDA;
+		st01 = VGA_ST01_MDA;
+	}
+
+	/* Sequencer registers, don't write SR07 */
+	for (i = 0; i < 7; i++)
+		i915_write_indexed(VGA_SR_INDEX, VGA_SR_DATA, i,
+				   dev_priv->saveSR[i]);
+
+	/* CRT controller regs */
+	/* Enable CR group 0 writes */
+	i915_write_indexed(cr_index, cr_data, 0x11, dev_priv->saveCR[0x11]);
+	for (i = 0; i < 0x24; i++)
+		i915_write_indexed(cr_index, cr_data, i, dev_priv->saveCR[i]);
+
+	/* Graphics controller regs */
+	for (i = 0; i < 9; i++)
+		i915_write_indexed(VGA_GR_INDEX, VGA_GR_DATA, i,
+				   dev_priv->saveGR[i]);
+
+	i915_write_indexed(VGA_GR_INDEX, VGA_GR_DATA, 0x10,
+			   dev_priv->saveGR[0x10]);
+	i915_write_indexed(VGA_GR_INDEX, VGA_GR_DATA, 0x11,
+			   dev_priv->saveGR[0x11]);
+	i915_write_indexed(VGA_GR_INDEX, VGA_GR_DATA, 0x18,
+			   dev_priv->saveGR[0x18]);
+
+	/* Attribute controller registers */
+	for (i = 0; i < 20; i++)
+		i915_write_ar(st01, i, dev_priv->saveAR[i], 0);
+	inb(st01); /* switch back to index mode */
+	outb(dev_priv->saveAR_INDEX | 0x20, VGA_AR_INDEX);
+
+	/* VGA color palette registers */
+	outb(dev_priv->saveDACMASK, VGA_DACMASK);
+	/* DACCRX automatically increments during read */
+	outb(0, VGA_DACWX);
+	/* Read 3 bytes of color data from each index */
+	for (i = 0; i < 256 * 3; i++)
+		outb(dev_priv->saveDACDATA[i], VGA_DACDATA);
+
+}
+
+static int i915_suspend(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	int i;
+
+	if (!dev || !dev_priv) {
+		printk(KERN_ERR "dev: %p, dev_priv: %p\n", dev, dev_priv);
+		printk(KERN_ERR "DRM not initialized, aborting suspend.\n");
+		return -ENODEV;
+	}
+
+	pci_save_state(dev->pdev);
+	pci_read_config_byte(dev->pdev, LBB, &dev_priv->saveLBB);
+
+	/* Pipe & plane A info */
+	dev_priv->savePIPEACONF = I915_READ(PIPEACONF);
+	dev_priv->savePIPEASRC = I915_READ(PIPEASRC);
+	dev_priv->saveFPA0 = I915_READ(FPA0);
+	dev_priv->saveFPA1 = I915_READ(FPA1);
+	dev_priv->saveDPLL_A = I915_READ(DPLL_A);
+	if (IS_I965G(dev))
+		dev_priv->saveDPLL_A_MD = I915_READ(DPLL_A_MD);
+	dev_priv->saveHTOTAL_A = I915_READ(HTOTAL_A);
+	dev_priv->saveHBLANK_A = I915_READ(HBLANK_A);
+	dev_priv->saveHSYNC_A = I915_READ(HSYNC_A);
+	dev_priv->saveVTOTAL_A = I915_READ(VTOTAL_A);
+	dev_priv->saveVBLANK_A = I915_READ(VBLANK_A);
+	dev_priv->saveVSYNC_A = I915_READ(VSYNC_A);
+	dev_priv->saveBCLRPAT_A = I915_READ(BCLRPAT_A);
+
+	dev_priv->saveDSPACNTR = I915_READ(DSPACNTR);
+	dev_priv->saveDSPASTRIDE = I915_READ(DSPASTRIDE);
+	dev_priv->saveDSPASIZE = I915_READ(DSPASIZE);
+	dev_priv->saveDSPAPOS = I915_READ(DSPAPOS);
+	dev_priv->saveDSPABASE = I915_READ(DSPABASE);
+	if (IS_I965G(dev)) {
+		dev_priv->saveDSPASURF = I915_READ(DSPASURF);
+		dev_priv->saveDSPATILEOFF = I915_READ(DSPATILEOFF);
+	}
+	i915_save_palette(dev, PIPE_A);
+
+	/* Pipe & plane B info */
+	dev_priv->savePIPEBCONF = I915_READ(PIPEBCONF);
+	dev_priv->savePIPEBSRC = I915_READ(PIPEBSRC);
+	dev_priv->saveFPB0 = I915_READ(FPB0);
+	dev_priv->saveFPB1 = I915_READ(FPB1);
+	dev_priv->saveDPLL_B = I915_READ(DPLL_B);
+	if (IS_I965G(dev))
+		dev_priv->saveDPLL_B_MD = I915_READ(DPLL_B_MD);
+	dev_priv->saveHTOTAL_B = I915_READ(HTOTAL_B);
+	dev_priv->saveHBLANK_B = I915_READ(HBLANK_B);
+	dev_priv->saveHSYNC_B = I915_READ(HSYNC_B);
+	dev_priv->saveVTOTAL_B = I915_READ(VTOTAL_B);
+	dev_priv->saveVBLANK_B = I915_READ(VBLANK_B);
+	dev_priv->saveVSYNC_B = I915_READ(VSYNC_B);
+	dev_priv->saveBCLRPAT_A = I915_READ(BCLRPAT_A);
+
+	dev_priv->saveDSPBCNTR = I915_READ(DSPBCNTR);
+	dev_priv->saveDSPBSTRIDE = I915_READ(DSPBSTRIDE);
+	dev_priv->saveDSPBSIZE = I915_READ(DSPBSIZE);
+	dev_priv->saveDSPBPOS = I915_READ(DSPBPOS);
+	dev_priv->saveDSPBBASE = I915_READ(DSPBBASE);
+	if (IS_I965GM(dev)) {
+		dev_priv->saveDSPBSURF = I915_READ(DSPBSURF);
+		dev_priv->saveDSPBTILEOFF = I915_READ(DSPBTILEOFF);
+	}
+	i915_save_palette(dev, PIPE_B);
+
+	/* CRT state */
+	dev_priv->saveADPA = I915_READ(ADPA);
+
+	/* LVDS state */
+	dev_priv->savePP_CONTROL = I915_READ(PP_CONTROL);
+	dev_priv->savePFIT_PGM_RATIOS = I915_READ(PFIT_PGM_RATIOS);
+	dev_priv->saveBLC_PWM_CTL = I915_READ(BLC_PWM_CTL);
+	if (IS_I965G(dev))
+		dev_priv->saveBLC_PWM_CTL2 = I915_READ(BLC_PWM_CTL2);
+	if (IS_MOBILE(dev) && !IS_I830(dev))
+		dev_priv->saveLVDS = I915_READ(LVDS);
+	if (!IS_I830(dev) && !IS_845G(dev))
+		dev_priv->savePFIT_CONTROL = I915_READ(PFIT_CONTROL);
+	dev_priv->saveLVDSPP_ON = I915_READ(LVDSPP_ON);
+	dev_priv->saveLVDSPP_OFF = I915_READ(LVDSPP_OFF);
+	dev_priv->savePP_CYCLE = I915_READ(PP_CYCLE);
+
+	/* FIXME: save TV & SDVO state */
+
+	/* FBC state */
+	dev_priv->saveFBC_CFB_BASE = I915_READ(FBC_CFB_BASE);
+	dev_priv->saveFBC_LL_BASE = I915_READ(FBC_LL_BASE);
+	dev_priv->saveFBC_CONTROL2 = I915_READ(FBC_CONTROL2);
+	dev_priv->saveFBC_CONTROL = I915_READ(FBC_CONTROL);
+
+	/* VGA state */
+	dev_priv->saveVCLK_DIVISOR_VGA0 = I915_READ(VCLK_DIVISOR_VGA0);
+	dev_priv->saveVCLK_DIVISOR_VGA1 = I915_READ(VCLK_DIVISOR_VGA1);
+	dev_priv->saveVCLK_POST_DIV = I915_READ(VCLK_POST_DIV);
+	dev_priv->saveVGACNTRL = I915_READ(VGACNTRL);
+
+	/* Scratch space */
+	for (i = 0; i < 16; i++) {
+		dev_priv->saveSWF0[i] = I915_READ(SWF0 + (i << 2));
+		dev_priv->saveSWF1[i] = I915_READ(SWF10 + (i << 2));
+	}
+	for (i = 0; i < 3; i++)
+		dev_priv->saveSWF2[i] = I915_READ(SWF30 + (i << 2));
+
+	i915_save_vga(dev);
+
+	/* Shut down the device */
+	pci_disable_device(dev->pdev);
+	pci_set_power_state(dev->pdev, PCI_D3hot);
+
+	return 0;
+}
+
+static int i915_resume(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	int i;
+
+	pci_set_power_state(dev->pdev, PCI_D0);
+	pci_restore_state(dev->pdev);
+	if (pci_enable_device(dev->pdev))
+		return -1;
+
+	pci_write_config_byte(dev->pdev, LBB, dev_priv->saveLBB);
+
+	/* Pipe & plane A info */
+	/* Prime the clock */
+	if (dev_priv->saveDPLL_A & DPLL_VCO_ENABLE) {
+		I915_WRITE(DPLL_A, dev_priv->saveDPLL_A &
+			   ~DPLL_VCO_ENABLE);
+		udelay(150);
+	}
+	I915_WRITE(FPA0, dev_priv->saveFPA0);
+	I915_WRITE(FPA1, dev_priv->saveFPA1);
+	/* Actually enable it */
+	I915_WRITE(DPLL_A, dev_priv->saveDPLL_A);
+	udelay(150);
+	if (IS_I965G(dev))
+		I915_WRITE(DPLL_A_MD, dev_priv->saveDPLL_A_MD);
+	udelay(150);
+
+	/* Restore mode */
+	I915_WRITE(HTOTAL_A, dev_priv->saveHTOTAL_A);
+	I915_WRITE(HBLANK_A, dev_priv->saveHBLANK_A);
+	I915_WRITE(HSYNC_A, dev_priv->saveHSYNC_A);
+	I915_WRITE(VTOTAL_A, dev_priv->saveVTOTAL_A);
+	I915_WRITE(VBLANK_A, dev_priv->saveVBLANK_A);
+	I915_WRITE(VSYNC_A, dev_priv->saveVSYNC_A);
+	I915_WRITE(BCLRPAT_A, dev_priv->saveBCLRPAT_A);
+
+	/* Restore plane info */
+	I915_WRITE(DSPASIZE, dev_priv->saveDSPASIZE);
+	I915_WRITE(DSPAPOS, dev_priv->saveDSPAPOS);
+	I915_WRITE(PIPEASRC, dev_priv->savePIPEASRC);
+	I915_WRITE(DSPABASE, dev_priv->saveDSPABASE);
+	I915_WRITE(DSPASTRIDE, dev_priv->saveDSPASTRIDE);
+	if (IS_I965G(dev)) {
+		I915_WRITE(DSPASURF, dev_priv->saveDSPASURF);
+		I915_WRITE(DSPATILEOFF, dev_priv->saveDSPATILEOFF);
+	}
+
+	if ((dev_priv->saveDPLL_A & DPLL_VCO_ENABLE) &&
+	    (dev_priv->saveDPLL_A & DPLL_VGA_MODE_DIS))
+		I915_WRITE(PIPEACONF, dev_priv->savePIPEACONF);
+
+	i915_restore_palette(dev, PIPE_A);
+	/* Enable the plane */
+	I915_WRITE(DSPACNTR, dev_priv->saveDSPACNTR);
+	I915_WRITE(DSPABASE, I915_READ(DSPABASE));
+
+	/* Pipe & plane B info */
+	if (dev_priv->saveDPLL_B & DPLL_VCO_ENABLE) {
+		I915_WRITE(DPLL_B, dev_priv->saveDPLL_B &
+			   ~DPLL_VCO_ENABLE);
+		udelay(150);
+	}
+	I915_WRITE(FPB0, dev_priv->saveFPB0);
+	I915_WRITE(FPB1, dev_priv->saveFPB1);
+	/* Actually enable it */
+	I915_WRITE(DPLL_B, dev_priv->saveDPLL_B);
+	udelay(150);
+	if (IS_I965G(dev))
+		I915_WRITE(DPLL_B_MD, dev_priv->saveDPLL_B_MD);
+	udelay(150);
+
+	/* Restore mode */
+	I915_WRITE(HTOTAL_B, dev_priv->saveHTOTAL_B);
+	I915_WRITE(HBLANK_B, dev_priv->saveHBLANK_B);
+	I915_WRITE(HSYNC_B, dev_priv->saveHSYNC_B);
+	I915_WRITE(VTOTAL_B, dev_priv->saveVTOTAL_B);
+	I915_WRITE(VBLANK_B, dev_priv->saveVBLANK_B);
+	I915_WRITE(VSYNC_B, dev_priv->saveVSYNC_B);
+	I915_WRITE(BCLRPAT_B, dev_priv->saveBCLRPAT_B);
+
+	/* Restore plane info */
+	I915_WRITE(DSPBSIZE, dev_priv->saveDSPBSIZE);
+	I915_WRITE(DSPBPOS, dev_priv->saveDSPBPOS);
+	I915_WRITE(PIPEBSRC, dev_priv->savePIPEBSRC);
+	I915_WRITE(DSPBBASE, dev_priv->saveDSPBBASE);
+	I915_WRITE(DSPBSTRIDE, dev_priv->saveDSPBSTRIDE);
+	if (IS_I965G(dev)) {
+		I915_WRITE(DSPBSURF, dev_priv->saveDSPBSURF);
+		I915_WRITE(DSPBTILEOFF, dev_priv->saveDSPBTILEOFF);
+	}
+
+	if ((dev_priv->saveDPLL_B & DPLL_VCO_ENABLE) &&
+	    (dev_priv->saveDPLL_B & DPLL_VGA_MODE_DIS))
+		I915_WRITE(PIPEBCONF, dev_priv->savePIPEBCONF);
+	i915_restore_palette(dev, PIPE_A);
+	/* Enable the plane */
+	I915_WRITE(DSPBCNTR, dev_priv->saveDSPBCNTR);
+	I915_WRITE(DSPBBASE, I915_READ(DSPBBASE));
+
+	/* CRT state */
+	I915_WRITE(ADPA, dev_priv->saveADPA);
+
+	/* LVDS state */
+	if (IS_I965G(dev))
+		I915_WRITE(BLC_PWM_CTL2, dev_priv->saveBLC_PWM_CTL2);
+	if (IS_MOBILE(dev) && !IS_I830(dev))
+		I915_WRITE(LVDS, dev_priv->saveLVDS);
+	if (!IS_I830(dev) && !IS_845G(dev))
+		I915_WRITE(PFIT_CONTROL, dev_priv->savePFIT_CONTROL);
+
+	I915_WRITE(PFIT_PGM_RATIOS, dev_priv->savePFIT_PGM_RATIOS);
+	I915_WRITE(BLC_PWM_CTL, dev_priv->saveBLC_PWM_CTL);
+	I915_WRITE(LVDSPP_ON, dev_priv->saveLVDSPP_ON);
+	I915_WRITE(LVDSPP_OFF, dev_priv->saveLVDSPP_OFF);
+	I915_WRITE(PP_CYCLE, dev_priv->savePP_CYCLE);
+	I915_WRITE(PP_CONTROL, dev_priv->savePP_CONTROL);
+
+	/* FIXME: restore TV & SDVO state */
+
+	/* FBC info */
+	I915_WRITE(FBC_CFB_BASE, dev_priv->saveFBC_CFB_BASE);
+	I915_WRITE(FBC_LL_BASE, dev_priv->saveFBC_LL_BASE);
+	I915_WRITE(FBC_CONTROL2, dev_priv->saveFBC_CONTROL2);
+	I915_WRITE(FBC_CONTROL, dev_priv->saveFBC_CONTROL);
+
+	/* VGA state */
+	I915_WRITE(VGACNTRL, dev_priv->saveVGACNTRL);
+	I915_WRITE(VCLK_DIVISOR_VGA0, dev_priv->saveVCLK_DIVISOR_VGA0);
+	I915_WRITE(VCLK_DIVISOR_VGA1, dev_priv->saveVCLK_DIVISOR_VGA1);
+	I915_WRITE(VCLK_POST_DIV, dev_priv->saveVCLK_POST_DIV);
+	udelay(150);
+
+	for (i = 0; i < 16; i++) {
+		I915_WRITE(SWF0 + (i << 2), dev_priv->saveSWF0[i]);
+		I915_WRITE(SWF10 + (i << 2), dev_priv->saveSWF1[i+7]);
+	}
+	for (i = 0; i < 3; i++)
+		I915_WRITE(SWF30 + (i << 2), dev_priv->saveSWF2[i]);
+
+	i915_restore_vga(dev);
+
+	return 0;
+}
+
 static struct drm_driver driver = {
 	/* don't use mtrr's here, the Xserver or user space app should
 	 * deal with them for intel hardware.
@@ -47,8 +506,11 @@ static struct drm_driver driver = {
 	    DRIVER_HAVE_IRQ | DRIVER_IRQ_SHARED | DRIVER_IRQ_VBL |
 	    DRIVER_IRQ_VBL2,
 	.load = i915_driver_load,
+	.unload = i915_driver_unload,
 	.lastclose = i915_driver_lastclose,
 	.preclose = i915_driver_preclose,
+	.suspend = i915_suspend,
+	.resume = i915_resume,
 	.device_is_agp = i915_driver_device_is_agp,
 	.vblank_wait = i915_driver_vblank_wait,
 	.vblank_wait2 = i915_driver_vblank_wait2,
diff --git a/drivers/char/drm/i915_drv.h b/drivers/char/drm/i915_drv.h
index f8cc71915c8e..661e2f571195 100644
--- a/drivers/char/drm/i915_drv.h
+++ b/drivers/char/drm/i915_drv.h
@@ -114,6 +114,85 @@ typedef struct drm_i915_private {
 	spinlock_t swaps_lock;
 	drm_i915_vbl_swap_t vbl_swaps;
 	unsigned int swaps_pending;
+
+	/* Register state */
+	u8 saveLBB;
+	u32 saveDSPACNTR;
+	u32 saveDSPBCNTR;
+	u32 savePIPEACONF;
+	u32 savePIPEBCONF;
+	u32 savePIPEASRC;
+	u32 savePIPEBSRC;
+	u32 saveFPA0;
+	u32 saveFPA1;
+	u32 saveDPLL_A;
+	u32 saveDPLL_A_MD;
+	u32 saveHTOTAL_A;
+	u32 saveHBLANK_A;
+	u32 saveHSYNC_A;
+	u32 saveVTOTAL_A;
+	u32 saveVBLANK_A;
+	u32 saveVSYNC_A;
+	u32 saveBCLRPAT_A;
+	u32 saveDSPASTRIDE;
+	u32 saveDSPASIZE;
+	u32 saveDSPAPOS;
+	u32 saveDSPABASE;
+	u32 saveDSPASURF;
+	u32 saveDSPATILEOFF;
+	u32 savePFIT_PGM_RATIOS;
+	u32 saveBLC_PWM_CTL;
+	u32 saveBLC_PWM_CTL2;
+	u32 saveFPB0;
+	u32 saveFPB1;
+	u32 saveDPLL_B;
+	u32 saveDPLL_B_MD;
+	u32 saveHTOTAL_B;
+	u32 saveHBLANK_B;
+	u32 saveHSYNC_B;
+	u32 saveVTOTAL_B;
+	u32 saveVBLANK_B;
+	u32 saveVSYNC_B;
+	u32 saveBCLRPAT_B;
+	u32 saveDSPBSTRIDE;
+	u32 saveDSPBSIZE;
+	u32 saveDSPBPOS;
+	u32 saveDSPBBASE;
+	u32 saveDSPBSURF;
+	u32 saveDSPBTILEOFF;
+	u32 saveVCLK_DIVISOR_VGA0;
+	u32 saveVCLK_DIVISOR_VGA1;
+	u32 saveVCLK_POST_DIV;
+	u32 saveVGACNTRL;
+	u32 saveADPA;
+	u32 saveLVDS;
+	u32 saveLVDSPP_ON;
+	u32 saveLVDSPP_OFF;
+	u32 saveDVOA;
+	u32 saveDVOB;
+	u32 saveDVOC;
+	u32 savePP_ON;
+	u32 savePP_OFF;
+	u32 savePP_CONTROL;
+	u32 savePP_CYCLE;
+	u32 savePFIT_CONTROL;
+	u32 save_palette_a[256];
+	u32 save_palette_b[256];
+	u32 saveFBC_CFB_BASE;
+	u32 saveFBC_LL_BASE;
+	u32 saveFBC_CONTROL;
+	u32 saveFBC_CONTROL2;
+	u32 saveSWF0[16];
+	u32 saveSWF1[16];
+	u32 saveSWF2[3];
+	u8 saveMSR;
+	u8 saveSR[8];
+	u8 saveGR[24];
+	u8 saveAR_INDEX;
+	u8 saveAR[20];
+	u8 saveDACMASK;
+	u8 saveDACDATA[256*3]; /* 256 3-byte colors */
+	u8 saveCR[36];
 } drm_i915_private_t;
 
 extern struct drm_ioctl_desc i915_ioctls[];
@@ -122,6 +201,7 @@ extern int i915_max_ioctl;
 				/* i915_dma.c */
 extern void i915_kernel_lost_context(struct drm_device * dev);
 extern int i915_driver_load(struct drm_device *, unsigned long flags);
+extern int i915_driver_unload(struct drm_device *);
 extern void i915_driver_lastclose(struct drm_device * dev);
 extern void i915_driver_preclose(struct drm_device *dev,
 				 struct drm_file *file_priv);
@@ -200,6 +280,50 @@ extern void i915_mem_release(struct drm_device * dev,
 
 extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller);
 
+/* Extended config space */
+#define LBB 0xf4
+
+/* VGA stuff */
+
+#define VGA_ST01_MDA 0x3ba
+#define VGA_ST01_CGA 0x3da
+
+#define VGA_MSR_WRITE 0x3c2
+#define VGA_MSR_READ 0x3cc
+#define   VGA_MSR_MEM_EN (1<<1)
+#define   VGA_MSR_CGA_MODE (1<<0)
+
+#define VGA_SR_INDEX 0x3c4
+#define VGA_SR_DATA 0x3c5
+
+#define VGA_AR_INDEX 0x3c0
+#define   VGA_AR_VID_EN (1<<5)
+#define VGA_AR_DATA_WRITE 0x3c0
+#define VGA_AR_DATA_READ 0x3c1
+
+#define VGA_GR_INDEX 0x3ce
+#define VGA_GR_DATA 0x3cf
+/* GR05 */
+#define   VGA_GR_MEM_READ_MODE_SHIFT 3
+#define     VGA_GR_MEM_READ_MODE_PLANE 1
+/* GR06 */
+#define   VGA_GR_MEM_MODE_MASK 0xc
+#define   VGA_GR_MEM_MODE_SHIFT 2
+#define   VGA_GR_MEM_A0000_AFFFF 0
+#define   VGA_GR_MEM_A0000_BFFFF 1
+#define   VGA_GR_MEM_B0000_B7FFF 2
+#define   VGA_GR_MEM_B0000_BFFFF 3
+
+#define VGA_DACMASK 0x3c6
+#define VGA_DACRX 0x3c7
+#define VGA_DACWX 0x3c8
+#define VGA_DACDATA 0x3c9
+
+#define VGA_CR_INDEX_MDA 0x3b4
+#define VGA_CR_DATA_MDA 0x3b5
+#define VGA_CR_INDEX_CGA 0x3d4
+#define VGA_CR_DATA_CGA 0x3d5
+
 #define GFX_OP_USER_INTERRUPT		((0<<29)|(2<<23))
 #define GFX_OP_BREAKPOINT_INTERRUPT	((0<<29)|(1<<23))
 #define CMD_REPORT_HEAD			(7<<23)
@@ -215,6 +339,44 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller);
 #define BB1_UNPROTECTED       (0<<0)
 #define BB2_END_ADDR_MASK     (~0x7)
 
+/* Framebuffer compression */
+#define FBC_CFB_BASE		0x03200 /* 4k page aligned */
+#define FBC_LL_BASE		0x03204 /* 4k page aligned */
+#define FBC_CONTROL		0x03208
+#define   FBC_CTL_EN		(1<<31)
+#define   FBC_CTL_PERIODIC	(1<<30)
+#define   FBC_CTL_INTERVAL_SHIFT (16)
+#define   FBC_CTL_UNCOMPRESSIBLE (1<<14)
+#define   FBC_CTL_STRIDE_SHIFT	(5)
+#define   FBC_CTL_FENCENO	(1<<0)
+#define FBC_COMMAND		0x0320c
+#define   FBC_CMD_COMPRESS	(1<<0)
+#define FBC_STATUS		0x03210
+#define   FBC_STAT_COMPRESSING	(1<<31)
+#define   FBC_STAT_COMPRESSED	(1<<30)
+#define   FBC_STAT_MODIFIED	(1<<29)
+#define   FBC_STAT_CURRENT_LINE	(1<<0)
+#define FBC_CONTROL2		0x03214
+#define   FBC_CTL_FENCE_DBL	(0<<4)
+#define   FBC_CTL_IDLE_IMM	(0<<2)
+#define   FBC_CTL_IDLE_FULL	(1<<2)
+#define   FBC_CTL_IDLE_LINE	(2<<2)
+#define   FBC_CTL_IDLE_DEBUG	(3<<2)
+#define   FBC_CTL_CPU_FENCE	(1<<1)
+#define   FBC_CTL_PLANEA	(0<<0)
+#define   FBC_CTL_PLANEB	(1<<0)
+#define FBC_FENCE_OFF		0x0321b
+
+#define FBC_LL_SIZE		(1536)
+#define FBC_LL_PAD		(32)
+
+/* Interrupt bits:
+ */
+#define USER_INT_FLAG    (1<<1)
+#define VSYNC_PIPEB_FLAG (1<<5)
+#define VSYNC_PIPEA_FLAG (1<<7)
+#define HWB_OOM_FLAG     (1<<13) /* binner out of memory */
+
 #define I915REG_HWSTAM		0x02098
 #define I915REG_INT_IDENTITY_R	0x020a4
 #define I915REG_INT_MASK_R	0x020a8
@@ -251,6 +413,10 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller);
 #define NOPID                   0x2094
 #define LP_RING			0x2030
 #define HP_RING			0x2040
+/* The binner has its own ring buffer:
+ */
+#define HWB_RING		0x2400
+
 #define RING_TAIL		0x00
 #define TAIL_ADDR		0x001FFFF8
 #define RING_HEAD		0x04
@@ -269,11 +435,105 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller);
 #define RING_VALID		0x00000001
 #define RING_INVALID		0x00000000
 
+/* Instruction parser error reg:
+ */
+#define IPEIR			0x2088
+
+/* Scratch pad debug 0 reg:
+ */
+#define SCPD0			0x209c
+
+/* Error status reg:
+ */
+#define ESR			0x20b8
+
+/* Secondary DMA fetch address debug reg:
+ */
+#define DMA_FADD_S		0x20d4
+
+/* Cache mode 0 reg.
+ *  - Manipulating render cache behaviour is central
+ *    to the concept of zone rendering, tuning this reg can help avoid
+ *    unnecessary render cache reads and even writes (for z/stencil)
+ *    at beginning and end of scene.
+ *
+ * - To change a bit, write to this reg with a mask bit set and the
+ * bit of interest either set or cleared.  EG: (BIT<<16) | BIT to set.
+ */
+#define Cache_Mode_0		0x2120
+#define CM0_MASK_SHIFT          16
+#define CM0_IZ_OPT_DISABLE      (1<<6)
+#define CM0_ZR_OPT_DISABLE      (1<<5)
+#define CM0_DEPTH_EVICT_DISABLE (1<<4)
+#define CM0_COLOR_EVICT_DISABLE (1<<3)
+#define CM0_DEPTH_WRITE_DISABLE (1<<1)
+#define CM0_RC_OP_FLUSH_DISABLE (1<<0)
+
+
+/* Graphics flush control.  A CPU write flushes the GWB of all writes.
+ * The data is discarded.
+ */
+#define GFX_FLSH_CNTL		0x2170
+
+/* Binner control.  Defines the location of the bin pointer list:
+ */
+#define BINCTL			0x2420
+#define BC_MASK			(1 << 9)
+
+/* Binned scene info.
+ */
+#define BINSCENE		0x2428
+#define BS_OP_LOAD		(1 << 8)
+#define BS_MASK			(1 << 22)
+
+/* Bin command parser debug reg:
+ */
+#define BCPD			0x2480
+
+/* Bin memory control debug reg:
+ */
+#define BMCD			0x2484
+
+/* Bin data cache debug reg:
+ */
+#define BDCD			0x2488
+
+/* Binner pointer cache debug reg:
+ */
+#define BPCD			0x248c
+
+/* Binner scratch pad debug reg:
+ */
+#define BINSKPD			0x24f0
+
+/* HWB scratch pad debug reg:
+ */
+#define HWBSKPD			0x24f4
+
+/* Binner memory pool reg:
+ */
+#define BMP_BUFFER		0x2430
+#define BMP_PAGE_SIZE_4K	(0 << 10)
+#define BMP_BUFFER_SIZE_SHIFT	1
+#define BMP_ENABLE		(1 << 0)
+
+/* Get/put memory from the binner memory pool:
+ */
+#define BMP_GET			0x2438
+#define BMP_PUT			0x2440
+#define BMP_OFFSET_SHIFT	5
+
+/* 3D state packets:
+ */
+#define GFX_OP_RASTER_RULES    ((0x3<<29)|(0x7<<24))
+
 #define GFX_OP_SCISSOR         ((0x3<<29)|(0x1c<<24)|(0x10<<19))
 #define SC_UPDATE_SCISSOR       (0x1<<1)
 #define SC_ENABLE_MASK          (0x1<<0)
 #define SC_ENABLE               (0x1<<0)
 
+#define GFX_OP_LOAD_INDIRECT   ((0x3<<29)|(0x1d<<24)|(0x7<<16))
+
 #define GFX_OP_SCISSOR_INFO    ((0x3<<29)|(0x1d<<24)|(0x81<<16)|(0x1))
 #define SCI_YMIN_MASK      (0xffff<<16)
 #define SCI_XMIN_MASK      (0xffff<<0)
@@ -290,6 +550,7 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller);
 
 #define GFX_OP_DRAWRECT_INFO_I965 ((0x7900<<16)|0x2)
 
+#define SRC_COPY_BLT_CMD                ((2<<29)|(0x43<<22)|4)
 #define XY_SRC_COPY_BLT_CMD		((2<<29)|(0x53<<22)|6)
 #define XY_SRC_COPY_BLT_WRITE_ALPHA	(1<<21)
 #define XY_SRC_COPY_BLT_WRITE_RGB	(1<<20)
@@ -301,6 +562,7 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller);
 #define MI_BATCH_NON_SECURE_I965 (1<<8)
 
 #define MI_WAIT_FOR_EVENT       ((0x3<<23))
+#define MI_WAIT_FOR_PLANE_B_FLIP      (1<<6)
 #define MI_WAIT_FOR_PLANE_A_FLIP      (1<<2)
 #define MI_WAIT_FOR_PLANE_A_SCANLINES (1<<1)
 
@@ -308,9 +570,535 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller);
 
 #define CMD_OP_DISPLAYBUFFER_INFO ((0x0<<29)|(0x14<<23)|2)
 #define ASYNC_FLIP                (1<<22)
+#define DISPLAY_PLANE_A           (0<<20)
+#define DISPLAY_PLANE_B           (1<<20)
+
+/* Display regs */
+#define DSPACNTR                0x70180
+#define DSPBCNTR                0x71180
+#define DISPPLANE_SEL_PIPE_MASK                 (1<<24)
+
+/* Define the region of interest for the binner:
+ */
+#define CMD_OP_BIN_CONTROL	 ((0x3<<29)|(0x1d<<24)|(0x84<<16)|4)
 
 #define CMD_OP_DESTBUFFER_INFO	 ((0x3<<29)|(0x1d<<24)|(0x8e<<16)|1)
 
-#define READ_BREADCRUMB(dev_priv) (((u32 *)(dev_priv->hw_status_page))[5])
+#define CMD_MI_FLUSH         (0x04 << 23)
+#define MI_NO_WRITE_FLUSH    (1 << 2)
+#define MI_READ_FLUSH        (1 << 0)
+#define MI_EXE_FLUSH         (1 << 1)
+#define MI_END_SCENE         (1 << 4) /* flush binner and incr scene count */
+#define MI_SCENE_COUNT       (1 << 3) /* just increment scene count */
+
+#define BREADCRUMB_BITS 31
+#define BREADCRUMB_MASK ((1U << BREADCRUMB_BITS) - 1)
+
+#define READ_BREADCRUMB(dev_priv)  (((volatile u32*)(dev_priv->hw_status_page))[5])
+#define READ_HWSP(dev_priv, reg)  (((volatile u32*)(dev_priv->hw_status_page))[reg])
+
+#define BLC_PWM_CTL		0x61254
+#define BACKLIGHT_MODULATION_FREQ_SHIFT		(17)
+
+#define BLC_PWM_CTL2		0x61250
+/**
+ * This is the most significant 15 bits of the number of backlight cycles in a
+ * complete cycle of the modulated backlight control.
+ *
+ * The actual value is this field multiplied by two.
+ */
+#define BACKLIGHT_MODULATION_FREQ_MASK		(0x7fff << 17)
+#define BLM_LEGACY_MODE				(1 << 16)
+/**
+ * This is the number of cycles out of the backlight modulation cycle for which
+ * the backlight is on.
+ *
+ * This field must be no greater than the number of cycles in the complete
+ * backlight modulation cycle.
+ */
+#define BACKLIGHT_DUTY_CYCLE_SHIFT		(0)
+#define BACKLIGHT_DUTY_CYCLE_MASK		(0xffff)
+
+#define I915_GCFGC			0xf0
+#define I915_LOW_FREQUENCY_ENABLE		(1 << 7)
+#define I915_DISPLAY_CLOCK_190_200_MHZ		(0 << 4)
+#define I915_DISPLAY_CLOCK_333_MHZ		(4 << 4)
+#define I915_DISPLAY_CLOCK_MASK			(7 << 4)
+
+#define I855_HPLLCC			0xc0
+#define I855_CLOCK_CONTROL_MASK			(3 << 0)
+#define I855_CLOCK_133_200			(0 << 0)
+#define I855_CLOCK_100_200			(1 << 0)
+#define I855_CLOCK_100_133			(2 << 0)
+#define I855_CLOCK_166_250			(3 << 0)
+
+/* p317, 319
+ */
+#define VCLK2_VCO_M        0x6008 /* treat as 16 bit? (includes msbs) */
+#define VCLK2_VCO_N        0x600a
+#define VCLK2_VCO_DIV_SEL  0x6012
+
+#define VCLK_DIVISOR_VGA0   0x6000
+#define VCLK_DIVISOR_VGA1   0x6004
+#define VCLK_POST_DIV	    0x6010
+/** Selects a post divisor of 4 instead of 2. */
+# define VGA1_PD_P2_DIV_4	(1 << 15)
+/** Overrides the p2 post divisor field */
+# define VGA1_PD_P1_DIV_2	(1 << 13)
+# define VGA1_PD_P1_SHIFT	8
+/** P1 value is 2 greater than this field */
+# define VGA1_PD_P1_MASK	(0x1f << 8)
+/** Selects a post divisor of 4 instead of 2. */
+# define VGA0_PD_P2_DIV_4	(1 << 7)
+/** Overrides the p2 post divisor field */
+# define VGA0_PD_P1_DIV_2	(1 << 5)
+# define VGA0_PD_P1_SHIFT	0
+/** P1 value is 2 greater than this field */
+# define VGA0_PD_P1_MASK	(0x1f << 0)
+
+/* I830 CRTC registers */
+#define HTOTAL_A	0x60000
+#define HBLANK_A	0x60004
+#define HSYNC_A		0x60008
+#define VTOTAL_A	0x6000c
+#define VBLANK_A	0x60010
+#define VSYNC_A		0x60014
+#define PIPEASRC	0x6001c
+#define BCLRPAT_A	0x60020
+#define VSYNCSHIFT_A	0x60028
+
+#define HTOTAL_B	0x61000
+#define HBLANK_B	0x61004
+#define HSYNC_B		0x61008
+#define VTOTAL_B	0x6100c
+#define VBLANK_B	0x61010
+#define VSYNC_B		0x61014
+#define PIPEBSRC	0x6101c
+#define BCLRPAT_B	0x61020
+#define VSYNCSHIFT_B	0x61028
+
+#define PP_STATUS	0x61200
+# define PP_ON					(1 << 31)
+/**
+ * Indicates that all dependencies of the panel are on:
+ *
+ * - PLL enabled
+ * - pipe enabled
+ * - LVDS/DVOB/DVOC on
+ */
+# define PP_READY				(1 << 30)
+# define PP_SEQUENCE_NONE			(0 << 28)
+# define PP_SEQUENCE_ON				(1 << 28)
+# define PP_SEQUENCE_OFF			(2 << 28)
+# define PP_SEQUENCE_MASK			0x30000000
+#define PP_CONTROL	0x61204
+# define POWER_TARGET_ON			(1 << 0)
+
+#define LVDSPP_ON       0x61208
+#define LVDSPP_OFF      0x6120c
+#define PP_CYCLE        0x61210
+
+#define PFIT_CONTROL	0x61230
+# define PFIT_ENABLE				(1 << 31)
+# define PFIT_PIPE_MASK				(3 << 29)
+# define PFIT_PIPE_SHIFT			29
+# define VERT_INTERP_DISABLE			(0 << 10)
+# define VERT_INTERP_BILINEAR			(1 << 10)
+# define VERT_INTERP_MASK			(3 << 10)
+# define VERT_AUTO_SCALE			(1 << 9)
+# define HORIZ_INTERP_DISABLE			(0 << 6)
+# define HORIZ_INTERP_BILINEAR			(1 << 6)
+# define HORIZ_INTERP_MASK			(3 << 6)
+# define HORIZ_AUTO_SCALE			(1 << 5)
+# define PANEL_8TO6_DITHER_ENABLE		(1 << 3)
+
+#define PFIT_PGM_RATIOS	0x61234
+# define PFIT_VERT_SCALE_MASK			0xfff00000
+# define PFIT_HORIZ_SCALE_MASK			0x0000fff0
+
+#define PFIT_AUTO_RATIOS	0x61238
+
+
+#define DPLL_A		0x06014
+#define DPLL_B		0x06018
+# define DPLL_VCO_ENABLE			(1 << 31)
+# define DPLL_DVO_HIGH_SPEED			(1 << 30)
+# define DPLL_SYNCLOCK_ENABLE			(1 << 29)
+# define DPLL_VGA_MODE_DIS			(1 << 28)
+# define DPLLB_MODE_DAC_SERIAL			(1 << 26) /* i915 */
+# define DPLLB_MODE_LVDS			(2 << 26) /* i915 */
+# define DPLL_MODE_MASK				(3 << 26)
+# define DPLL_DAC_SERIAL_P2_CLOCK_DIV_10	(0 << 24) /* i915 */
+# define DPLL_DAC_SERIAL_P2_CLOCK_DIV_5		(1 << 24) /* i915 */
+# define DPLLB_LVDS_P2_CLOCK_DIV_14		(0 << 24) /* i915 */
+# define DPLLB_LVDS_P2_CLOCK_DIV_7		(1 << 24) /* i915 */
+# define DPLL_P2_CLOCK_DIV_MASK			0x03000000 /* i915 */
+# define DPLL_FPA01_P1_POST_DIV_MASK		0x00ff0000 /* i915 */
+/**
+ *  The i830 generation, in DAC/serial mode, defines p1 as two plus this
+ * bitfield, or just 2 if PLL_P1_DIVIDE_BY_TWO is set.
+ */
+# define DPLL_FPA01_P1_POST_DIV_MASK_I830	0x001f0000
+/**
+ * The i830 generation, in LVDS mode, defines P1 as the bit number set within
+ * this field (only one bit may be set).
+ */
+# define DPLL_FPA01_P1_POST_DIV_MASK_I830_LVDS	0x003f0000
+# define DPLL_FPA01_P1_POST_DIV_SHIFT		16
+# define PLL_P2_DIVIDE_BY_4			(1 << 23) /* i830, required in DVO non-gang */
+# define PLL_P1_DIVIDE_BY_TWO			(1 << 21) /* i830 */
+# define PLL_REF_INPUT_DREFCLK			(0 << 13)
+# define PLL_REF_INPUT_TVCLKINA			(1 << 13) /* i830 */
+# define PLL_REF_INPUT_TVCLKINBC		(2 << 13) /* SDVO TVCLKIN */
+# define PLLB_REF_INPUT_SPREADSPECTRUMIN	(3 << 13)
+# define PLL_REF_INPUT_MASK			(3 << 13)
+# define PLL_LOAD_PULSE_PHASE_SHIFT		9
+/*
+ * Parallel to Serial Load Pulse phase selection.
+ * Selects the phase for the 10X DPLL clock for the PCIe
+ * digital display port. The range is 4 to 13; 10 or more
+ * is just a flip delay. The default is 6
+ */
+# define PLL_LOAD_PULSE_PHASE_MASK		(0xf << PLL_LOAD_PULSE_PHASE_SHIFT)
+# define DISPLAY_RATE_SELECT_FPA1		(1 << 8)
+
+/**
+ * SDVO multiplier for 945G/GM. Not used on 965.
+ *
+ * \sa DPLL_MD_UDI_MULTIPLIER_MASK
+ */
+# define SDVO_MULTIPLIER_MASK			0x000000ff
+# define SDVO_MULTIPLIER_SHIFT_HIRES		4
+# define SDVO_MULTIPLIER_SHIFT_VGA		0
+
+/** @defgroup DPLL_MD
+ * @{
+ */
+/** Pipe A SDVO/UDI clock multiplier/divider register for G965. */
+#define DPLL_A_MD		0x0601c
+/** Pipe B SDVO/UDI clock multiplier/divider register for G965. */
+#define DPLL_B_MD		0x06020
+/**
+ * UDI pixel divider, controlling how many pixels are stuffed into a packet.
+ *
+ * Value is pixels minus 1.  Must be set to 1 pixel for SDVO.
+ */
+# define DPLL_MD_UDI_DIVIDER_MASK		0x3f000000
+# define DPLL_MD_UDI_DIVIDER_SHIFT		24
+/** UDI pixel divider for VGA, same as DPLL_MD_UDI_DIVIDER_MASK. */
+# define DPLL_MD_VGA_UDI_DIVIDER_MASK		0x003f0000
+# define DPLL_MD_VGA_UDI_DIVIDER_SHIFT		16
+/**
+ * SDVO/UDI pixel multiplier.
+ *
+ * SDVO requires that the bus clock rate be between 1 and 2 Ghz, and the bus
+ * clock rate is 10 times the DPLL clock.  At low resolution/refresh rate
+ * modes, the bus rate would be below the limits, so SDVO allows for stuffing
+ * dummy bytes in the datastream at an increased clock rate, with both sides of
+ * the link knowing how many bytes are fill.
+ *
+ * So, for a mode with a dotclock of 65Mhz, we would want to double the clock
+ * rate to 130Mhz to get a bus rate of 1.30Ghz.  The DPLL clock rate would be
+ * set to 130Mhz, and the SDVO multiplier set to 2x in this register and
+ * through an SDVO command.
+ *
+ * This register field has values of multiplication factor minus 1, with
+ * a maximum multiplier of 5 for SDVO.
+ */
+# define DPLL_MD_UDI_MULTIPLIER_MASK		0x00003f00
+# define DPLL_MD_UDI_MULTIPLIER_SHIFT		8
+/** SDVO/UDI pixel multiplier for VGA, same as DPLL_MD_UDI_MULTIPLIER_MASK.
+ * This best be set to the default value (3) or the CRT won't work. No,
+ * I don't entirely understand what this does...
+ */
+# define DPLL_MD_VGA_UDI_MULTIPLIER_MASK	0x0000003f
+# define DPLL_MD_VGA_UDI_MULTIPLIER_SHIFT	0
+/** @} */
+
+#define DPLL_TEST		0x606c
+# define DPLLB_TEST_SDVO_DIV_1			(0 << 22)
+# define DPLLB_TEST_SDVO_DIV_2			(1 << 22)
+# define DPLLB_TEST_SDVO_DIV_4			(2 << 22)
+# define DPLLB_TEST_SDVO_DIV_MASK		(3 << 22)
+# define DPLLB_TEST_N_BYPASS			(1 << 19)
+# define DPLLB_TEST_M_BYPASS			(1 << 18)
+# define DPLLB_INPUT_BUFFER_ENABLE		(1 << 16)
+# define DPLLA_TEST_N_BYPASS			(1 << 3)
+# define DPLLA_TEST_M_BYPASS			(1 << 2)
+# define DPLLA_INPUT_BUFFER_ENABLE		(1 << 0)
+
+#define ADPA			0x61100
+#define ADPA_DAC_ENABLE		(1<<31)
+#define ADPA_DAC_DISABLE	0
+#define ADPA_PIPE_SELECT_MASK	(1<<30)
+#define ADPA_PIPE_A_SELECT	0
+#define ADPA_PIPE_B_SELECT	(1<<30)
+#define ADPA_USE_VGA_HVPOLARITY (1<<15)
+#define ADPA_SETS_HVPOLARITY	0
+#define ADPA_VSYNC_CNTL_DISABLE (1<<11)
+#define ADPA_VSYNC_CNTL_ENABLE	0
+#define ADPA_HSYNC_CNTL_DISABLE (1<<10)
+#define ADPA_HSYNC_CNTL_ENABLE	0
+#define ADPA_VSYNC_ACTIVE_HIGH	(1<<4)
+#define ADPA_VSYNC_ACTIVE_LOW	0
+#define ADPA_HSYNC_ACTIVE_HIGH	(1<<3)
+#define ADPA_HSYNC_ACTIVE_LOW	0
+
+#define FPA0		0x06040
+#define FPA1		0x06044
+#define FPB0		0x06048
+#define FPB1		0x0604c
+# define FP_N_DIV_MASK				0x003f0000
+# define FP_N_DIV_SHIFT				16
+# define FP_M1_DIV_MASK				0x00003f00
+# define FP_M1_DIV_SHIFT			8
+# define FP_M2_DIV_MASK				0x0000003f
+# define FP_M2_DIV_SHIFT			0
+
+
+#define PORT_HOTPLUG_EN		0x61110
+# define SDVOB_HOTPLUG_INT_EN			(1 << 26)
+# define SDVOC_HOTPLUG_INT_EN			(1 << 25)
+# define TV_HOTPLUG_INT_EN			(1 << 18)
+# define CRT_HOTPLUG_INT_EN			(1 << 9)
+# define CRT_HOTPLUG_FORCE_DETECT		(1 << 3)
+
+#define PORT_HOTPLUG_STAT	0x61114
+# define CRT_HOTPLUG_INT_STATUS			(1 << 11)
+# define TV_HOTPLUG_INT_STATUS			(1 << 10)
+# define CRT_HOTPLUG_MONITOR_MASK		(3 << 8)
+# define CRT_HOTPLUG_MONITOR_COLOR		(3 << 8)
+# define CRT_HOTPLUG_MONITOR_MONO		(2 << 8)
+# define CRT_HOTPLUG_MONITOR_NONE		(0 << 8)
+# define SDVOC_HOTPLUG_INT_STATUS		(1 << 7)
+# define SDVOB_HOTPLUG_INT_STATUS		(1 << 6)
+
+#define SDVOB			0x61140
+#define SDVOC			0x61160
+#define SDVO_ENABLE				(1 << 31)
+#define SDVO_PIPE_B_SELECT			(1 << 30)
+#define SDVO_STALL_SELECT			(1 << 29)
+#define SDVO_INTERRUPT_ENABLE			(1 << 26)
+/**
+ * 915G/GM SDVO pixel multiplier.
+ *
+ * Programmed value is multiplier - 1, up to 5x.
+ *
+ * \sa DPLL_MD_UDI_MULTIPLIER_MASK
+ */
+#define SDVO_PORT_MULTIPLY_MASK			(7 << 23)
+#define SDVO_PORT_MULTIPLY_SHIFT		23
+#define SDVO_PHASE_SELECT_MASK			(15 << 19)
+#define SDVO_PHASE_SELECT_DEFAULT		(6 << 19)
+#define SDVO_CLOCK_OUTPUT_INVERT		(1 << 18)
+#define SDVOC_GANG_MODE				(1 << 16)
+#define SDVO_BORDER_ENABLE			(1 << 7)
+#define SDVOB_PCIE_CONCURRENCY			(1 << 3)
+#define SDVO_DETECTED				(1 << 2)
+/* Bits to be preserved when writing */
+#define SDVOB_PRESERVE_MASK			((1 << 17) | (1 << 16) | (1 << 14))
+#define SDVOC_PRESERVE_MASK			(1 << 17)
+
+/** @defgroup LVDS
+ * @{
+ */
+/**
+ * This register controls the LVDS output enable, pipe selection, and data
+ * format selection.
+ *
+ * All of the clock/data pairs are force powered down by power sequencing.
+ */
+#define LVDS			0x61180
+/**
+ * Enables the LVDS port.  This bit must be set before DPLLs are enabled, as
+ * the DPLL semantics change when the LVDS is assigned to that pipe.
+ */
+# define LVDS_PORT_EN			(1 << 31)
+/** Selects pipe B for LVDS data.  Must be set on pre-965. */
+# define LVDS_PIPEB_SELECT		(1 << 30)
+
+/**
+ * Enables the A0-A2 data pairs and CLKA, containing 18 bits of color data per
+ * pixel.
+ */
+# define LVDS_A0A2_CLKA_POWER_MASK	(3 << 8)
+# define LVDS_A0A2_CLKA_POWER_DOWN	(0 << 8)
+# define LVDS_A0A2_CLKA_POWER_UP	(3 << 8)
+/**
+ * Controls the A3 data pair, which contains the additional LSBs for 24 bit
+ * mode.  Only enabled if LVDS_A0A2_CLKA_POWER_UP also indicates it should be
+ * on.
+ */
+# define LVDS_A3_POWER_MASK		(3 << 6)
+# define LVDS_A3_POWER_DOWN		(0 << 6)
+# define LVDS_A3_POWER_UP		(3 << 6)
+/**
+ * Controls the CLKB pair.  This should only be set when LVDS_B0B3_POWER_UP
+ * is set.
+ */
+# define LVDS_CLKB_POWER_MASK		(3 << 4)
+# define LVDS_CLKB_POWER_DOWN		(0 << 4)
+# define LVDS_CLKB_POWER_UP		(3 << 4)
+
+/**
+ * Controls the B0-B3 data pairs.  This must be set to match the DPLL p2
+ * setting for whether we are in dual-channel mode.  The B3 pair will
+ * additionally only be powered up when LVDS_A3_POWER_UP is set.
+ */
+# define LVDS_B0B3_POWER_MASK		(3 << 2)
+# define LVDS_B0B3_POWER_DOWN		(0 << 2)
+# define LVDS_B0B3_POWER_UP		(3 << 2)
+
+#define PIPEACONF 0x70008
+#define PIPEACONF_ENABLE	(1<<31)
+#define PIPEACONF_DISABLE	0
+#define PIPEACONF_DOUBLE_WIDE	(1<<30)
+#define I965_PIPECONF_ACTIVE	(1<<30)
+#define PIPEACONF_SINGLE_WIDE	0
+#define PIPEACONF_PIPE_UNLOCKED 0
+#define PIPEACONF_PIPE_LOCKED	(1<<25)
+#define PIPEACONF_PALETTE	0
+#define PIPEACONF_GAMMA		(1<<24)
+#define PIPECONF_FORCE_BORDER	(1<<25)
+#define PIPECONF_PROGRESSIVE	(0 << 21)
+#define PIPECONF_INTERLACE_W_FIELD_INDICATION	(6 << 21)
+#define PIPECONF_INTERLACE_FIELD_0_ONLY		(7 << 21)
+
+#define PIPEBCONF 0x71008
+#define PIPEBCONF_ENABLE	(1<<31)
+#define PIPEBCONF_DISABLE	0
+#define PIPEBCONF_DOUBLE_WIDE	(1<<30)
+#define PIPEBCONF_DISABLE	0
+#define PIPEBCONF_GAMMA		(1<<24)
+#define PIPEBCONF_PALETTE	0
+
+#define PIPEBGCMAXRED		0x71010
+#define PIPEBGCMAXGREEN		0x71014
+#define PIPEBGCMAXBLUE		0x71018
+#define PIPEBSTAT		0x71024
+#define PIPEBFRAMEHIGH		0x71040
+#define PIPEBFRAMEPIXEL		0x71044
+
+#define DSPACNTR		0x70180
+#define DSPBCNTR		0x71180
+#define DISPLAY_PLANE_ENABLE			(1<<31)
+#define DISPLAY_PLANE_DISABLE			0
+#define DISPPLANE_GAMMA_ENABLE			(1<<30)
+#define DISPPLANE_GAMMA_DISABLE			0
+#define DISPPLANE_PIXFORMAT_MASK		(0xf<<26)
+#define DISPPLANE_8BPP				(0x2<<26)
+#define DISPPLANE_15_16BPP			(0x4<<26)
+#define DISPPLANE_16BPP				(0x5<<26)
+#define DISPPLANE_32BPP_NO_ALPHA		(0x6<<26)
+#define DISPPLANE_32BPP				(0x7<<26)
+#define DISPPLANE_STEREO_ENABLE			(1<<25)
+#define DISPPLANE_STEREO_DISABLE		0
+#define DISPPLANE_SEL_PIPE_MASK			(1<<24)
+#define DISPPLANE_SEL_PIPE_A			0
+#define DISPPLANE_SEL_PIPE_B			(1<<24)
+#define DISPPLANE_SRC_KEY_ENABLE		(1<<22)
+#define DISPPLANE_SRC_KEY_DISABLE		0
+#define DISPPLANE_LINE_DOUBLE			(1<<20)
+#define DISPPLANE_NO_LINE_DOUBLE		0
+#define DISPPLANE_STEREO_POLARITY_FIRST		0
+#define DISPPLANE_STEREO_POLARITY_SECOND	(1<<18)
+/* plane B only */
+#define DISPPLANE_ALPHA_TRANS_ENABLE		(1<<15)
+#define DISPPLANE_ALPHA_TRANS_DISABLE		0
+#define DISPPLANE_SPRITE_ABOVE_DISPLAYA		0
+#define DISPPLANE_SPRITE_ABOVE_OVERLAY		(1)
+
+#define DSPABASE		0x70184
+#define DSPASTRIDE		0x70188
+
+#define DSPBBASE		0x71184
+#define DSPBADDR		DSPBBASE
+#define DSPBSTRIDE		0x71188
+
+#define DSPAKEYVAL		0x70194
+#define DSPAKEYMASK		0x70198
+
+#define DSPAPOS			0x7018C /* reserved */
+#define DSPASIZE		0x70190
+#define DSPBPOS			0x7118C
+#define DSPBSIZE		0x71190
+
+#define DSPASURF		0x7019C
+#define DSPATILEOFF		0x701A4
+
+#define DSPBSURF		0x7119C
+#define DSPBTILEOFF		0x711A4
+
+#define VGACNTRL		0x71400
+# define VGA_DISP_DISABLE			(1 << 31)
+# define VGA_2X_MODE				(1 << 30)
+# define VGA_PIPE_B_SELECT			(1 << 29)
+
+/*
+ * Some BIOS scratch area registers.  The 845 (and 830?) store the amount
+ * of video memory available to the BIOS in SWF1.
+ */
+
+#define SWF0			0x71410
+
+/*
+ * 855 scratch registers.
+ */
+#define SWF10			0x70410
+
+#define SWF30			0x72414
+
+/*
+ * Overlay registers.  These are overlay registers accessed via MMIO.
+ * Those loaded via the overlay register page are defined in i830_video.c.
+ */
+#define OVADD			0x30000
+
+#define DOVSTA			0x30008
+#define OC_BUF			(0x3<<20)
+
+#define OGAMC5			0x30010
+#define OGAMC4			0x30014
+#define OGAMC3			0x30018
+#define OGAMC2			0x3001c
+#define OGAMC1			0x30020
+#define OGAMC0			0x30024
+/*
+ * Palette registers
+ */
+#define PALETTE_A		0x0a000
+#define PALETTE_B		0x0a800
+
+#define IS_I830(dev) ((dev)->pci_device == 0x3577)
+#define IS_845G(dev) ((dev)->pci_device == 0x2562)
+#define IS_I85X(dev) ((dev)->pci_device == 0x3582)
+#define IS_I855(dev) ((dev)->pci_device == 0x3582)
+#define IS_I865G(dev) ((dev)->pci_device == 0x2572)
+
+#define IS_I915G(dev) (dev->pci_device == 0x2582)/* || dev->pci_device == PCI_DEVICE_ID_INTELPCI_CHIP_E7221_G)*/
+#define IS_I915GM(dev) ((dev)->pci_device == 0x2592)
+#define IS_I945G(dev) ((dev)->pci_device == 0x2772)
+#define IS_I945GM(dev) ((dev)->pci_device == 0x27A2)
+
+#define IS_I965G(dev) ((dev)->pci_device == 0x2972 || \
+		       (dev)->pci_device == 0x2982 || \
+		       (dev)->pci_device == 0x2992 || \
+		       (dev)->pci_device == 0x29A2 || \
+		       (dev)->pci_device == 0x2A02 || \
+		       (dev)->pci_device == 0x2A12)
+
+#define IS_I965GM(dev) ((dev)->pci_device == 0x2A02)
+
+#define IS_G33(dev)    ((dev)->pci_device == 0x29C2 ||	\
+			(dev)->pci_device == 0x29B2 ||	\
+			(dev)->pci_device == 0x29D2)
+
+#define IS_I9XX(dev) (IS_I915G(dev) || IS_I915GM(dev) || IS_I945G(dev) || \
+		      IS_I945GM(dev) || IS_I965G(dev) || IS_G33(dev))
+
+#define IS_MOBILE(dev) (IS_I830(dev) || IS_I85X(dev) || IS_I915GM(dev) || \
+			IS_I945GM(dev) || IS_I965GM(dev))
+
+#define PRIMARY_RINGBUFFER_SIZE         (128*1024)
 
 #endif