Merge tag 'staging-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging/IIO updates from Greg KH:
 "Here's the large set of staging and iio driver patches for 4.13-rc1.

  After over 500 patches, we removed about 200 more lines of code than
  we added, not great, but we added some new IIO drivers for unsupported
  hardware, so it's an overall win.

  Also here are lots of small fixes, and some tty core api additions
  (with the tty maintainer's ack) for the speakup drivers, those are
  finally getting some much needed cleanups and are looking much better
  now than before. Full details in the shortlog.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'staging-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (529 commits)
  staging: lustre: replace kmalloc with kmalloc_array
  Staging: ion: fix code style warning from NULL comparisons
  staging: fsl-mc: make dprc.h header private
  staging: fsl-mc: move mc-cmd.h contents in the public header
  staging: fsl-mc: move mc-sys.h contents in the public header
  staging: fsl-mc: fix a few implicit includes
  staging: fsl-mc: remove dpmng API files
  staging: fsl-mc: move rest of mc-bus.h to private header
  staging: fsl-mc: move couple of definitions to public header
  staging: fsl-mc: move irq domain creation prototype to public header
  staging: fsl-mc: turn several exported functions static
  staging: fsl-mc: delete prototype of unimplemented function
  staging: fsl-mc: delete duplicated function prototypes
  staging: fsl-mc: decouple the mc-bus public headers from dprc.h
  staging: fsl-mc: drop useless #includes
  staging: fsl-mc: be consistent when checking strcmp() return
  staging: fsl-mc: move comparison before strcmp() call
  staging: speakup: make function ser_to_dev static
  staging: ks7010: fix spelling mistake: "errror" -> "error"
  staging: rtl8192e: fix spelling mistake: "respose" -> "response"
  ...

6 files changed, 66 insertions, 13 deletions

diff --git a/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.txt b/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.txt
index 047189192aec..f413e82c8b83 100644
--- a/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.txt
@@ -2,6 +2,8 @@
 
 Required properties:
 - compatible:	depending on the SoC this should be one of:
+			- "amlogic,meson8-saradc" for Meson8
+			- "amlogic,meson8b-saradc" for Meson8b
 			- "amlogic,meson-gxbb-saradc" for GXBB
 			- "amlogic,meson-gxl-saradc" for GXL
 			- "amlogic,meson-gxm-saradc" for GXM
diff --git a/Documentation/devicetree/bindings/iio/adc/renesas,gyroadc.txt b/Documentation/devicetree/bindings/iio/adc/renesas,gyroadc.txt
index f5b0adae6010..df5b9f2ad8d8 100644
--- a/Documentation/devicetree/bindings/iio/adc/renesas,gyroadc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/renesas,gyroadc.txt
@@ -1,4 +1,4 @@
-* Renesas RCar GyroADC device driver
+* Renesas R-Car GyroADC device driver
 
 The GyroADC block is a reduced SPI block with up to 8 chipselect lines,
 which supports the SPI protocol of a selected few SPI ADCs. The SPI ADCs
@@ -16,8 +16,7 @@ Required properties:
 - clocks:	References to all the clocks specified in the clock-names
 		property as specified in
 		Documentation/devicetree/bindings/clock/clock-bindings.txt.
-- clock-names:	Shall contain "fck" and "if". The "fck" is the GyroADC block
-		clock, the "if" is the interface clock.
+- clock-names:	Shall contain "fck". The "fck" is the GyroADC block clock.
 - power-domains: Must contain a reference to the PM domain, if available.
 - #address-cells: Should be <1> (setting for the subnodes) for all ADCs
 		except for "fujitsu,mb88101a". Should be <0> (setting for
@@ -75,8 +74,8 @@ Example:
 	adc@e6e54000 {
 		compatible = "renesas,r8a7791-gyroadc", "renesas,rcar-gyroadc";
 		reg = <0 0xe6e54000 0 64>;
-		clocks = <&mstp9_clks R8A7791_CLK_GYROADC>, <&clk_65m>;
-		clock-names = "fck", "if";
+		clocks = <&mstp9_clks R8A7791_CLK_GYROADC>;
+		clock-names = "fck";
 		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 
 		pinctrl-0 = <&adc_pins>;
diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
index e35f9f1b3200..8310073f14e1 100644
--- a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
@@ -21,11 +21,19 @@ own configurable sequence and trigger:
 Contents of a stm32 adc root node:
 -----------------------------------
 Required properties:
-- compatible: Should be "st,stm32f4-adc-core".
+- compatible: Should be one of:
+  "st,stm32f4-adc-core"
+  "st,stm32h7-adc-core"
 - reg: Offset and length of the ADC block register set.
 - interrupts: Must contain the interrupt for ADC block.
-- clocks: Clock for the analog circuitry (common to all ADCs).
-- clock-names: Must be "adc".
+- clocks: Core can use up to two clocks, depending on part used:
+  - "adc" clock: for the analog circuitry, common to all ADCs.
+    It's required on stm32f4.
+    It's optional on stm32h7.
+  - "bus" clock: for registers access, common to all ADCs.
+    It's not present on stm32f4.
+    It's required on stm32h7.
+- clock-names: Must be "adc" and/or "bus" depending on part used.
 - interrupt-controller: Identifies the controller node as interrupt-parent
 - vref-supply: Phandle to the vref input analog reference voltage.
 - #interrupt-cells = <1>;
@@ -42,14 +50,18 @@ An ADC block node should contain at least one subnode, representing an
 ADC instance available on the machine.
 
 Required properties:
-- compatible: Should be "st,stm32f4-adc".
+- compatible: Should be one of:
+  "st,stm32f4-adc"
+  "st,stm32h7-adc"
 - reg: Offset of ADC instance in ADC block (e.g. may be 0x0, 0x100, 0x200).
-- clocks: Input clock private to this ADC instance.
+- clocks: Input clock private to this ADC instance. It's required only on
+  stm32f4, that has per instance clock input for registers access.
 - interrupt-parent: Phandle to the parent interrupt controller.
 - interrupts: IRQ Line for the ADC (e.g. may be 0 for adc@0, 1 for adc@100 or
   2 for adc@200).
 - st,adc-channels: List of single-ended channels muxed for this ADC.
-  It can have up to 16 channels, numbered from 0 to 15 (resp. for in0..in15).
+  It can have up to 16 channels on stm32f4 or 20 channels on stm32h7, numbered
+  from 0 to 15 or 19 (resp. for in0..in15 or in0..in19).
 - #io-channel-cells = <1>: See the IIO bindings section "IIO consumers" in
   Documentation/devicetree/bindings/iio/iio-bindings.txt
 
@@ -58,7 +70,9 @@ Optional properties:
   See ../../dma/dma.txt for details.
 - dma-names: Must be "rx" when dmas property is being used.
 - assigned-resolution-bits: Resolution (bits) to use for conversions. Must
-  match device available resolutions (e.g. can be 6, 8, 10 or 12 on stm32f4).
+  match device available resolutions:
+  * can be 6, 8, 10 or 12 on stm32f4
+  * can be 8, 10, 12, 14 or 16 on stm32h7
   Default is maximum resolution if unset.
 
 Example:
diff --git a/Documentation/devicetree/bindings/iio/adc/ti-adc084s021.txt b/Documentation/devicetree/bindings/iio/adc/ti-adc084s021.txt
new file mode 100644
index 000000000000..4259e50620bc
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/ti-adc084s021.txt
@@ -0,0 +1,19 @@
+* Texas Instruments' ADC084S021
+
+Required properties:
+ - compatible        : Must be "ti,adc084s021"
+ - reg               : SPI chip select number for the device
+ - vref-supply       : The regulator supply for ADC reference voltage
+ - spi-cpol          : Per spi-bus bindings
+ - spi-cpha          : Per spi-bus bindings
+ - spi-max-frequency : Per spi-bus bindings
+
+Example:
+adc@0 {
+	compatible = "ti,adc084s021";
+	reg = <0>;
+	vref-supply = <&adc_vref>;
+	spi-cpol;
+	spi-cpha;
+	spi-max-frequency = <16000000>;
+};
diff --git a/Documentation/devicetree/bindings/iio/adc/ti-adc108s102.txt b/Documentation/devicetree/bindings/iio/adc/ti-adc108s102.txt
new file mode 100644
index 000000000000..bbbbb4a9f58f
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/ti-adc108s102.txt
@@ -0,0 +1,18 @@
+* Texas Instruments' ADC108S102 and ADC128S102 ADC chip
+
+Required properties:
+ - compatible: Should be "ti,adc108s102"
+ - reg: spi chip select number for the device
+ - vref-supply: The regulator supply for ADC reference voltage
+
+Recommended properties:
+ - spi-max-frequency: Definition as per
+		Documentation/devicetree/bindings/spi/spi-bus.txt
+
+Example:
+adc@0 {
+	compatible = "ti,adc108s102";
+	reg = <0>;
+	vref-supply = <&vdd_supply>;
+	spi-max-frequency = <1000000>;
+};
diff --git a/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt b/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt
index 8305fb05ffda..6f28ff55f3ec 100644
--- a/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt
+++ b/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt
@@ -13,7 +13,8 @@ Optional properties:
   "data ready" (valid values: 1 or 2).
 - interrupt-parent: should be the phandle for the interrupt controller
 - interrupts: interrupt mapping for IRQ. It should be configured with
-  flags IRQ_TYPE_LEVEL_HIGH or IRQ_TYPE_EDGE_RISING.
+  flags IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_EDGE_RISING, IRQ_TYPE_LEVEL_LOW or
+  IRQ_TYPE_EDGE_FALLING.
 
   Refer to interrupt-controller/interrupts.txt for generic interrupt
   client node bindings.