summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt')
-rw-r--r--Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt28
1 files changed, 21 insertions, 7 deletions
diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
index e35f9f1b3200..8310073f14e1 100644
--- a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
@@ -21,11 +21,19 @@ own configurable sequence and trigger:
Contents of a stm32 adc root node:
-----------------------------------
Required properties:
-- compatible: Should be "st,stm32f4-adc-core".
+- compatible: Should be one of:
+ "st,stm32f4-adc-core"
+ "st,stm32h7-adc-core"
- reg: Offset and length of the ADC block register set.
- interrupts: Must contain the interrupt for ADC block.
-- clocks: Clock for the analog circuitry (common to all ADCs).
-- clock-names: Must be "adc".
+- clocks: Core can use up to two clocks, depending on part used:
+ - "adc" clock: for the analog circuitry, common to all ADCs.
+ It's required on stm32f4.
+ It's optional on stm32h7.
+ - "bus" clock: for registers access, common to all ADCs.
+ It's not present on stm32f4.
+ It's required on stm32h7.
+- clock-names: Must be "adc" and/or "bus" depending on part used.
- interrupt-controller: Identifies the controller node as interrupt-parent
- vref-supply: Phandle to the vref input analog reference voltage.
- #interrupt-cells = <1>;
@@ -42,14 +50,18 @@ An ADC block node should contain at least one subnode, representing an
ADC instance available on the machine.
Required properties:
-- compatible: Should be "st,stm32f4-adc".
+- compatible: Should be one of:
+ "st,stm32f4-adc"
+ "st,stm32h7-adc"
- reg: Offset of ADC instance in ADC block (e.g. may be 0x0, 0x100, 0x200).
-- clocks: Input clock private to this ADC instance.
+- clocks: Input clock private to this ADC instance. It's required only on
+ stm32f4, that has per instance clock input for registers access.
- interrupt-parent: Phandle to the parent interrupt controller.
- interrupts: IRQ Line for the ADC (e.g. may be 0 for adc@0, 1 for adc@100 or
2 for adc@200).
- st,adc-channels: List of single-ended channels muxed for this ADC.
- It can have up to 16 channels, numbered from 0 to 15 (resp. for in0..in15).
+ It can have up to 16 channels on stm32f4 or 20 channels on stm32h7, numbered
+ from 0 to 15 or 19 (resp. for in0..in15 or in0..in19).
- #io-channel-cells = <1>: See the IIO bindings section "IIO consumers" in
Documentation/devicetree/bindings/iio/iio-bindings.txt
@@ -58,7 +70,9 @@ Optional properties:
See ../../dma/dma.txt for details.
- dma-names: Must be "rx" when dmas property is being used.
- assigned-resolution-bits: Resolution (bits) to use for conversions. Must
- match device available resolutions (e.g. can be 6, 8, 10 or 12 on stm32f4).
+ match device available resolutions:
+ * can be 6, 8, 10 or 12 on stm32f4
+ * can be 8, 10, 12, 14 or 16 on stm32h7
Default is maximum resolution if unset.
Example:
OpenPOWER on IntegriCloud