summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2013-12-24 09:35:58 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2013-12-24 09:35:58 -0800
commit4b69316ededd0d2db309c7eca3858144c05fe8c1 (patch)
tree09804cd32aeef0ef7d6c5b57894b49cab88b4927
parentf60900f2609e893c7f8d0bccc7ada4947dac4cd5 (diff)
parent85fbd722ad0f5d64d1ad15888cd1eb2188bfb557 (diff)
downloadtalos-obmc-linux-4b69316ededd0d2db309c7eca3858144c05fe8c1.tar.gz
talos-obmc-linux-4b69316ededd0d2db309c7eca3858144c05fe8c1.zip
Merge branch 'for-3.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata
Pull libata fixes from Tejun Heo: "There's one interseting commit - "libata, freezer: avoid block device removal while system is frozen". It's an ugly hack working around a deadlock condition between driver core resume and block layer device removal paths through freezer which was made more reproducible by writeback being converted to workqueue some releases ago. The bug has nothing to do with libata but it's just an workaround which is easy to backport. After discussion, Rafael and I seem to agree that we don't really need kernel freezables - both kthread and workqueue. There are few specific workqueues which constitute PM operations and require freezing, which will be converted to use workqueue_set_max_active() instead. All other kernel freezer uses are planned to be removed, followed by the removal of kthread and workqueue freezer support, hopefully. Others are device-specific fixes. The most notable is the addition of NO_NCQ_TRIM which is used to disable queued TRIM commands to Micro M500 SSDs which otherwise suffers data corruption" * 'for-3.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: libata, freezer: avoid block device removal while system is frozen libata: implement ATA_HORKAGE_NO_NCQ_TRIM and apply it to Micro M500 SSDs libata: disable a disk via libata.force params ahci: bail out on ICH6 before using AHCI BAR ahci: imx: Explicitly clear IMX6Q_GPR13_SATA_MPLL_CLK_EN libata: add ATA_HORKAGE_BROKEN_FPDMA_AA quirk for Seagate Momentus SpinPoint M8
-rw-r--r--Documentation/kernel-parameters.txt2
-rw-r--r--drivers/ata/ahci.c18
-rw-r--r--drivers/ata/ahci_imx.c3
-rw-r--r--drivers/ata/libata-core.c19
-rw-r--r--drivers/ata/libata-scsi.c21
-rw-r--r--include/linux/libata.h1
-rw-r--r--kernel/freezer.c6
7 files changed, 58 insertions, 12 deletions
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 50680a59a2ff..b9e9bd854298 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -1529,6 +1529,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
* atapi_dmadir: Enable ATAPI DMADIR bridge support
+ * disable: Disable this device.
+
If there are multiple matching configurations changing
the same attribute, the last one is used.
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 14f1e9506338..c0ed4f273cf2 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -1238,15 +1238,6 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
if (rc)
return rc;
- /* AHCI controllers often implement SFF compatible interface.
- * Grab all PCI BARs just in case.
- */
- rc = pcim_iomap_regions_request_all(pdev, 1 << ahci_pci_bar, DRV_NAME);
- if (rc == -EBUSY)
- pcim_pin_device(pdev);
- if (rc)
- return rc;
-
if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
(pdev->device == 0x2652 || pdev->device == 0x2653)) {
u8 map;
@@ -1263,6 +1254,15 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
}
}
+ /* AHCI controllers often implement SFF compatible interface.
+ * Grab all PCI BARs just in case.
+ */
+ rc = pcim_iomap_regions_request_all(pdev, 1 << ahci_pci_bar, DRV_NAME);
+ if (rc == -EBUSY)
+ pcim_pin_device(pdev);
+ if (rc)
+ return rc;
+
hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL);
if (!hpriv)
return -ENOMEM;
diff --git a/drivers/ata/ahci_imx.c b/drivers/ata/ahci_imx.c
index ae2d73fe321e..3e23e9941dad 100644
--- a/drivers/ata/ahci_imx.c
+++ b/drivers/ata/ahci_imx.c
@@ -113,7 +113,7 @@ static int imx6q_sata_init(struct device *dev, void __iomem *mmio)
/*
* set PHY Paremeters, two steps to configure the GPR13,
* one write for rest of parameters, mask of first write
- * is 0x07fffffd, and the other one write for setting
+ * is 0x07ffffff, and the other one write for setting
* the mpll_clk_en.
*/
regmap_update_bits(imxpriv->gpr, 0x34, IMX6Q_GPR13_SATA_RX_EQ_VAL_MASK
@@ -124,6 +124,7 @@ static int imx6q_sata_init(struct device *dev, void __iomem *mmio)
| IMX6Q_GPR13_SATA_TX_ATTEN_MASK
| IMX6Q_GPR13_SATA_TX_BOOST_MASK
| IMX6Q_GPR13_SATA_TX_LVL_MASK
+ | IMX6Q_GPR13_SATA_MPLL_CLK_EN
| IMX6Q_GPR13_SATA_TX_EDGE_RATE
, IMX6Q_GPR13_SATA_RX_EQ_VAL_3_0_DB
| IMX6Q_GPR13_SATA_RX_LOS_LVL_SATA2M
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 75b93678bbcd..1393a5890ed5 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -2149,9 +2149,16 @@ static int ata_dev_config_ncq(struct ata_device *dev,
"failed to get NCQ Send/Recv Log Emask 0x%x\n",
err_mask);
} else {
+ u8 *cmds = dev->ncq_send_recv_cmds;
+
dev->flags |= ATA_DFLAG_NCQ_SEND_RECV;
- memcpy(dev->ncq_send_recv_cmds, ap->sector_buf,
- ATA_LOG_NCQ_SEND_RECV_SIZE);
+ memcpy(cmds, ap->sector_buf, ATA_LOG_NCQ_SEND_RECV_SIZE);
+
+ if (dev->horkage & ATA_HORKAGE_NO_NCQ_TRIM) {
+ ata_dev_dbg(dev, "disabling queued TRIM support\n");
+ cmds[ATA_LOG_NCQ_SEND_RECV_DSM_OFFSET] &=
+ ~ATA_LOG_NCQ_SEND_RECV_DSM_TRIM;
+ }
}
}
@@ -4156,6 +4163,9 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
{ "ST3320[68]13AS", "SD1[5-9]", ATA_HORKAGE_NONCQ |
ATA_HORKAGE_FIRMWARE_WARN },
+ /* Seagate Momentus SpinPoint M8 seem to have FPMDA_AA issues */
+ { "ST1000LM024 HN-M101MBB", "2AR10001", ATA_HORKAGE_BROKEN_FPDMA_AA },
+
/* Blacklist entries taken from Silicon Image 3124/3132
Windows driver .inf file - also several Linux problem reports */
{ "HTS541060G9SA00", "MB3OC60D", ATA_HORKAGE_NONCQ, },
@@ -4202,6 +4212,10 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
{ "PIONEER DVD-RW DVR-212D", NULL, ATA_HORKAGE_NOSETXFER },
{ "PIONEER DVD-RW DVR-216D", NULL, ATA_HORKAGE_NOSETXFER },
+ /* devices that don't properly handle queued TRIM commands */
+ { "Micron_M500*", NULL, ATA_HORKAGE_NO_NCQ_TRIM, },
+ { "Crucial_CT???M500SSD1", NULL, ATA_HORKAGE_NO_NCQ_TRIM, },
+
/* End Marker */
{ }
};
@@ -6519,6 +6533,7 @@ static int __init ata_parse_force_one(char **cur,
{ "norst", .lflags = ATA_LFLAG_NO_HRST | ATA_LFLAG_NO_SRST },
{ "rstonce", .lflags = ATA_LFLAG_RST_ONCE },
{ "atapi_dmadir", .horkage_on = ATA_HORKAGE_ATAPI_DMADIR },
+ { "disable", .horkage_on = ATA_HORKAGE_DISABLE },
};
char *start = *cur, *p = *cur;
char *id, *val, *endp;
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index ab58556d347c..377eb889f555 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -3872,6 +3872,27 @@ void ata_scsi_hotplug(struct work_struct *work)
return;
}
+ /*
+ * XXX - UGLY HACK
+ *
+ * The block layer suspend/resume path is fundamentally broken due
+ * to freezable kthreads and workqueue and may deadlock if a block
+ * device gets removed while resume is in progress. I don't know
+ * what the solution is short of removing freezable kthreads and
+ * workqueues altogether.
+ *
+ * The following is an ugly hack to avoid kicking off device
+ * removal while freezer is active. This is a joke but does avoid
+ * this particular deadlock scenario.
+ *
+ * https://bugzilla.kernel.org/show_bug.cgi?id=62801
+ * http://marc.info/?l=linux-kernel&m=138695698516487
+ */
+#ifdef CONFIG_FREEZER
+ while (pm_freezing)
+ msleep(10);
+#endif
+
DPRINTK("ENTER\n");
mutex_lock(&ap->scsi_scan_mutex);
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 0e23c26485f4..9b503376738f 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -418,6 +418,7 @@ enum {
ATA_HORKAGE_DUMP_ID = (1 << 16), /* dump IDENTIFY data */
ATA_HORKAGE_MAX_SEC_LBA48 = (1 << 17), /* Set max sects to 65535 */
ATA_HORKAGE_ATAPI_DMADIR = (1 << 18), /* device requires dmadir */
+ ATA_HORKAGE_NO_NCQ_TRIM = (1 << 19), /* don't use queued TRIM */
/* DMA mask for user DMA control: User visible values; DO NOT
renumber */
diff --git a/kernel/freezer.c b/kernel/freezer.c
index b462fa197517..aa6a8aadb911 100644
--- a/kernel/freezer.c
+++ b/kernel/freezer.c
@@ -19,6 +19,12 @@ EXPORT_SYMBOL(system_freezing_cnt);
bool pm_freezing;
bool pm_nosig_freezing;
+/*
+ * Temporary export for the deadlock workaround in ata_scsi_hotplug().
+ * Remove once the hack becomes unnecessary.
+ */
+EXPORT_SYMBOL_GPL(pm_freezing);
+
/* protects freezing and frozen transitions */
static DEFINE_SPINLOCK(freezer_lock);
OpenPOWER on IntegriCloud