ARM: dts: remove STiH416-pinctrl.dtsi

Since v4.8, STiH415/416 clock support has
been removed [1], these platform doesn't boot.
We can remove DTS files related to these socs.

[1] https://patchwork.kernel.org/patch/9157571/

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>

1 files changed, 0 insertions, 692 deletions

diff --git a/arch/arm/boot/dts/stih416-pinctrl.dtsi b/arch/arm/boot/dts/stih416-pinctrl.dtsi
deleted file mode 100644
index 9c97f7e651a0..000000000000
--- a/arch/arm/boot/dts/stih416-pinctrl.dtsi
+++ /dev/null
@@ -1,692 +0,0 @@
-
-/*
- * Copyright (C) 2013 STMicroelectronics Limited.
- * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * publishhed by the Free Software Foundation.
- */
-#include "st-pincfg.h"
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-/ {
-
-	aliases {
-		gpio0	= &pio0;
-		gpio1	= &pio1;
-		gpio2	= &pio2;
-		gpio3	= &pio3;
-		gpio4	= &pio4;
-		gpio5	= &pio40;
-		gpio6	= &pio5;
-		gpio7	= &pio6;
-		gpio8	= &pio7;
-		gpio9	= &pio8;
-		gpio10	= &pio9;
-		gpio11	= &pio10;
-		gpio12	= &pio11;
-		gpio13	= &pio12;
-		gpio14	= &pio30;
-		gpio15	= &pio31;
-		gpio16	= &pio13;
-		gpio17	= &pio14;
-		gpio18	= &pio15;
-		gpio19	= &pio16;
-		gpio20	= &pio17;
-		gpio21	= &pio18;
-		gpio22	= &pio100;
-		gpio23	= &pio101;
-		gpio24	= &pio102;
-		gpio25	= &pio103;
-		gpio26	= &pio104;
-		gpio27	= &pio105;
-		gpio28	= &pio106;
-		gpio29	= &pio107;
-	};
-
-	soc {
-		pin-controller-sbc {
-			#address-cells	= <1>;
-			#size-cells	= <1>;
-			compatible	= "st,stih416-sbc-pinctrl";
-			st,syscfg	= <&syscfg_sbc>;
-			reg 		= <0xfe61f080 0x4>;
-			reg-names	= "irqmux";
-			interrupts 	= <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names	= "irqmux";
-			ranges		= <0 0xfe610000 0x6000>;
-
-			pio0: gpio@fe610000 {
-				gpio-controller;
-				#gpio-cells	= <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0 0x100>;
-				st,bank-name	= "PIO0";
-			};
-			pio1: gpio@fe611000 {
-				gpio-controller;
-				#gpio-cells	= <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x1000 0x100>;
-				st,bank-name	= "PIO1";
-			};
-			pio2: gpio@fe612000 {
-				gpio-controller;
-				#gpio-cells	= <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x2000 0x100>;
-				st,bank-name	= "PIO2";
-			};
-			pio3: gpio@fe613000 {
-				gpio-controller;
-				#gpio-cells	= <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x3000 0x100>;
-				st,bank-name	= "PIO3";
-			};
-			pio4: gpio@fe614000 {
-				gpio-controller;
-				#gpio-cells	= <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x4000 0x100>;
-				st,bank-name	= "PIO4";
-			};
-			pio40: gpio@fe615000 {
-				gpio-controller;
-				#gpio-cells	= <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x5000 0x100>;
-				st,bank-name	= "PIO40";
-				st,retime-pin-mask = <0x7f>;
-			};
-
-			rc{
-				pinctrl_ir: ir0 {
-					st,pins {
-						ir = <&pio4 0 ALT2 IN>;
-					};
-				};
-			};
-			sbc_serial1 {
-				pinctrl_sbc_serial1: sbc_serial1 {
-					st,pins {
-						tx	= <&pio2 6 ALT3 OUT>;
-						rx	= <&pio2 7 ALT3 IN>;
-					};
-				};
-			};
-
-			keyscan {
-				pinctrl_keyscan: keyscan {
-					st,pins {
-						keyin0 = <&pio0 2 ALT2 IN>;
-						keyin1 = <&pio0 3 ALT2 IN>;
-						keyin2 = <&pio0 4 ALT2 IN>;
-						keyin3 = <&pio2 6 ALT2 IN>;
-
-						keyout0 = <&pio1 6 ALT2 OUT>;
-						keyout1 = <&pio1 7 ALT2 OUT>;
-						keyout2 = <&pio0 6 ALT2 OUT>;
-						keyout3 = <&pio2 7 ALT2 OUT>;
-					};
-				};
-			};
-
-			sbc_i2c0 {
-				pinctrl_sbc_i2c0_default: sbc_i2c0-default {
-					st,pins {
-						sda = <&pio4 6 ALT1 BIDIR>;
-						scl = <&pio4 5 ALT1 BIDIR>;
-					};
-				};
-			};
-
-			usb {
-				pinctrl_usb3: usb3 {
-					st,pins {
-						oc-detect = <&pio40 0 ALT1 IN>;
-						pwr-enable = <&pio40 1 ALT1 OUT>;
-					};
-				};
-			};
-
-			sbc_i2c1 {
-				pinctrl_sbc_i2c1_default: sbc_i2c1-default {
-					st,pins {
-						sda = <&pio3 2 ALT2 BIDIR>;
-						scl = <&pio3 1 ALT2 BIDIR>;
-					};
-				};
-			};
-
-			gmac1 {
-				pinctrl_mii1: mii1 {
-					st,pins {
-						txd0 = <&pio0 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
-						txd1 = <&pio0 1 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
-						txd2 = <&pio0 2 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
-						txd3 = <&pio0 3 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
-						txer = <&pio0 4 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
-						txen = <&pio0 5 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
-						txclk = <&pio0 6 ALT1 IN NICLK 0 CLK_A>;
-						col =   <&pio0 7 ALT1 IN BYPASS 1000>;
-
-						mdio =  <&pio1 0 ALT1 OUT BYPASS 1500>;
-						mdc =   <&pio1 1 ALT1 OUT NICLK 0 CLK_A>;
-						crs =   <&pio1 2 ALT1 IN BYPASS 1000>;
-						mdint = <&pio1 3 ALT1 IN BYPASS 0>;
-						rxd0 =  <&pio1 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
-						rxd1 =  <&pio1 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
-						rxd2 =  <&pio1 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
-						rxd3 =  <&pio1 7 ALT1 IN SE_NICLK_IO 0 CLK_A>;
-
-						rxdv =  <&pio2 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
-						rx_er = <&pio2 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
-						rxclk = <&pio2 2 ALT1 IN NICLK 0 CLK_A>;
-						phyclk = <&pio2 3 ALT1 OUT NICLK 0 CLK_A>;
-					};
-				};
-				pinctrl_rgmii1: rgmii1-0 {
-					st,pins {
-						txd0 =  <&pio0 0 ALT1 OUT DE_IO 500 CLK_A>;
-						txd1 =  <&pio0 1 ALT1 OUT DE_IO 500 CLK_A>;
-						txd2 =  <&pio0 2 ALT1 OUT DE_IO 500 CLK_A>;
-						txd3 =  <&pio0 3 ALT1 OUT DE_IO 500 CLK_A>;
-						txen =  <&pio0 5 ALT1 OUT DE_IO 0   CLK_A>;
-						txclk = <&pio0 6 ALT1 IN  NICLK 0   CLK_A>;
-
-						mdio = <&pio1 0 ALT1 OUT BYPASS 0>;
-						mdc  = <&pio1 1 ALT1 OUT NICLK  0 CLK_A>;
-						rxd0 = <&pio1 4 ALT1 IN DE_IO 500 CLK_A>;
-						rxd1 = <&pio1 5 ALT1 IN DE_IO 500 CLK_A>;
-						rxd2 = <&pio1 6 ALT1 IN DE_IO 500 CLK_A>;
-						rxd3 = <&pio1 7 ALT1 IN DE_IO 500 CLK_A>;
-
-						rxdv   = <&pio2 0 ALT1 IN  DE_IO 500 CLK_A>;
-						rxclk  = <&pio2 2 ALT1 IN  NICLK 0   CLK_A>;
-						phyclk = <&pio2 3 ALT4 OUT NICLK 0   CLK_B>;
-
-						clk125= <&pio3 7 ALT4 IN NICLK 0 CLK_A>;
-					};
-				};
-			};
-
-			pwm1 {
-				pinctrl_pwm1_chan0_default: pwm1-0-default {
-					st,pins {
-						pwm-out    = <&pio3 0 ALT1 OUT>;
-						pwm-capturein = <&pio3 2 ALT1 IN>;
-
-					};
-				};
-				pinctrl_pwm1_chan1_default: pwm1-1-default {
-					st,pins {
-						pwm-out    = <&pio4 4 ALT1 OUT>;
-						pwm-capturein = <&pio4 3 ALT1 IN>;
-					};
-				};
-				pinctrl_pwm1_chan2_default: pwm1-2-default {
-					st,pins {
-						pwm-out    = <&pio4 6 ALT3 OUT>;
-					};
-				};
-				pinctrl_pwm1_chan3_default: pwm1-3-default {
-					st,pins {
-						pwm-out    = <&pio4 7 ALT3 OUT>;
-					};
-				};
-			};
-		};
-
-		pin-controller-front {
-			#address-cells	= <1>;
-			#size-cells	= <1>;
-			compatible	= "st,stih416-front-pinctrl";
-			st,syscfg	= <&syscfg_front>;
-			reg 		= <0xfee0f080 0x4>;
-			reg-names	= "irqmux";
-			interrupts 	= <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names	= "irqmux";
-			ranges		= <0 0xfee00000 0x10000>;
-
-			pio5: gpio@fee00000 {
-				gpio-controller;
-				#gpio-cells	= <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0 0x100>;
-				st,bank-name	= "PIO5";
-			};
-			pio6: gpio@fee01000 {
-				gpio-controller;
-				#gpio-cells	= <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x1000 0x100>;
-				st,bank-name	= "PIO6";
-			};
-			pio7: gpio@fee02000 {
-				gpio-controller;
-				#gpio-cells	= <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x2000 0x100>;
-				st,bank-name	= "PIO7";
-			};
-			pio8: gpio@fee03000 {
-				gpio-controller;
-				#gpio-cells	= <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x3000 0x100>;
-				st,bank-name	= "PIO8";
-			};
-			pio9: gpio@fee04000 {
-				gpio-controller;
-				#gpio-cells	= <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x4000 0x100>;
-				st,bank-name	= "PIO9";
-			};
-			pio10: gpio@fee05000 {
-				gpio-controller;
-				#gpio-cells	= <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x5000 0x100>;
-				st,bank-name	= "PIO10";
-			};
-			pio11: gpio@fee06000 {
-				gpio-controller;
-				#gpio-cells	= <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x6000 0x100>;
-				st,bank-name	= "PIO11";
-			};
-			pio12: gpio@fee07000 {
-				gpio-controller;
-				#gpio-cells	= <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x7000 0x100>;
-				st,bank-name	= "PIO12";
-			};
-			pio30: gpio@fee08000 {
-				gpio-controller;
-				#gpio-cells	= <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x8000 0x100>;
-				st,bank-name	= "PIO30";
-			};
-			pio31: gpio@fee09000 {
-				gpio-controller;
-				#gpio-cells	= <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x9000 0x100>;
-				st,bank-name	= "PIO31";
-			};
-
-			pwm0 {
-				pinctrl_pwm0_chan0_default: pwm0-0-default {
-					st,pins {
-						pwm-out    = <&pio9 7 ALT2 OUT>;
-						pwm-capturein = <&pio9 6 ALT2 IN>;
-					};
-				};
-			};
-
-			serial2-oe {
-				pinctrl_serial2_oe: serial2-1 {
-					st,pins {
-						output-enable	= <&pio11 3 ALT2 OUT>;
-					};
-				};
-			};
-
-			i2c0 {
-				pinctrl_i2c0_default: i2c0-default {
-					st,pins {
-						sda = <&pio9 3 ALT1 BIDIR>;
-						scl = <&pio9 2 ALT1 BIDIR>;
-					};
-				};
-			};
-
-			usb {
-				pinctrl_usb0: usb0 {
-					st,pins {
-						oc-detect = <&pio9 4 ALT1 IN>;
-						pwr-enable = <&pio9 5 ALT1 OUT>;
-					};
-				};
-			};
-
-
-			i2c1 {
-				pinctrl_i2c1_default: i2c1-default {
-					st,pins {
-						sda = <&pio12 1 ALT1 BIDIR>;
-						scl = <&pio12 0 ALT1 BIDIR>;
-					};
-				};
-			};
-
-			fsm {
-				pinctrl_fsm: fsm {
-					st,pins {
-						spi-fsm-clk  = <&pio12 2 ALT1 OUT>;
-						spi-fsm-cs   = <&pio12 3 ALT1 OUT>;
-						spi-fsm-mosi = <&pio12 4 ALT1 OUT>;
-						spi-fsm-miso = <&pio12 5 ALT1 IN>;
-						spi-fsm-hol  = <&pio12 6 ALT1 OUT>;
-						spi-fsm-wp   = <&pio12 7 ALT1 OUT>;
-					};
-				};
-			};
-		};
-
-		pin-controller-rear {
-			#address-cells	= <1>;
-			#size-cells	= <1>;
-			compatible	= "st,stih416-rear-pinctrl";
-			st,syscfg	= <&syscfg_rear>;
-			reg 		= <0xfe82f080 0x4>;
-			reg-names	= "irqmux";
-			interrupts 	= <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names	= "irqmux";
-			ranges 		= <0 0xfe820000 0x6000>;
-
-			pio13: gpio@fe820000 {
-				gpio-controller;
-				#gpio-cells	= <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0 0x100>;
-				st,bank-name	= "PIO13";
-			};
-			pio14: gpio@fe821000 {
-				gpio-controller;
-				#gpio-cells	= <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x1000 0x100>;
-				st,bank-name	= "PIO14";
-			};
-			pio15: gpio@fe822000 {
-				gpio-controller;
-				#gpio-cells	= <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x2000 0x100>;
-				st,bank-name	= "PIO15";
-			};
-			pio16: gpio@fe823000 {
-				gpio-controller;
-				#gpio-cells	= <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x3000 0x100>;
-				st,bank-name	= "PIO16";
-			};
-			pio17: gpio@fe824000 {
-				gpio-controller;
-				#gpio-cells	= <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x4000 0x100>;
-				st,bank-name	= "PIO17";
-			};
-			pio18: gpio@fe825000 {
-				gpio-controller;
-				#gpio-cells	= <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x5000 0x100>;
-				st,bank-name	= "PIO18";
-				st,retime-pin-mask = <0xf>;
-			};
-
-			serial2 {
-				pinctrl_serial2: serial2-0 {
-					st,pins {
-						tx	= <&pio17 4 ALT2 OUT>;
-						rx	= <&pio17 5 ALT2 IN>;
-					};
-				};
-			};
-
-			gmac0 {
-				pinctrl_mii0: mii0 {
-					st,pins {
-						mdint = <&pio13 6 ALT2 IN  BYPASS      0>;
-						txen =  <&pio13 7 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
-						txd0 =  <&pio14 0 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
-						txd1 =  <&pio14 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
-						txd2 =  <&pio14 2 ALT2 OUT SE_NICLK_IO 0 CLK_B>;
-						txd3 =  <&pio14 3 ALT2 OUT SE_NICLK_IO 0 CLK_B>;
-
-						txclk = <&pio15 0 ALT2 IN  NICLK       0 CLK_A>;
-						txer =  <&pio15 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
-						crs = <&pio15 2 ALT2 IN  BYPASS 1000>;
-						col = <&pio15 3 ALT2 IN  BYPASS 1000>;
-						mdio= <&pio15 4 ALT2 OUT BYPASS 1500>;
-						mdc = <&pio15 5 ALT2 OUT NICLK  0    CLK_B>;
-
-						rxd0 =  <&pio16 0 ALT2 IN SE_NICLK_IO 0 CLK_A>;
-						rxd1 =  <&pio16 1 ALT2 IN SE_NICLK_IO 0 CLK_A>;
-						rxd2 =  <&pio16 2 ALT2 IN SE_NICLK_IO 0 CLK_A>;
-						rxd3 =  <&pio16 3 ALT2 IN SE_NICLK_IO 0 CLK_A>;
-						rxdv =  <&pio15 6 ALT2 IN SE_NICLK_IO 0 CLK_A>;
-						rx_er = <&pio15 7 ALT2 IN SE_NICLK_IO 0 CLK_A>;
-						rxclk = <&pio17 0 ALT2 IN NICLK 0 CLK_A>;
-						phyclk = <&pio13 5 ALT2 OUT NICLK 0 CLK_B>;
-					};
-				};
-
-				pinctrl_gmii0: gmii0 {
-					st,pins {
-						};
-				};
-				pinctrl_rgmii0: rgmii0 {
-					st,pins {
-						 phyclk = <&pio13  5 ALT4 OUT NICLK 0 CLK_B>;
-						 txen = <&pio13 7 ALT2 OUT DE_IO 0 CLK_A>;
-						 txd0  = <&pio14 0 ALT2 OUT DE_IO 500 CLK_A>;
-						 txd1  = <&pio14 1 ALT2 OUT DE_IO 500 CLK_A>;
-						 txd2  = <&pio14 2 ALT2 OUT DE_IO 500 CLK_B>;
-						 txd3  = <&pio14 3 ALT2 OUT DE_IO 500 CLK_B>;
-						 txclk = <&pio15 0 ALT2 IN NICLK 0 CLK_A>;
-
-						 mdio = <&pio15 4 ALT2 OUT BYPASS 0>;
-						 mdc = <&pio15 5 ALT2 OUT NICLK 0 CLK_B>;
-
-						 rxdv = <&pio15 6 ALT2 IN DE_IO 500 CLK_A>;
-						 rxd0 =<&pio16 0 ALT2 IN DE_IO	500 CLK_A>;
-						 rxd1 =<&pio16 1 ALT2 IN DE_IO	500 CLK_A>;
-						 rxd2 =<&pio16 2 ALT2 IN DE_IO	500 CLK_A>;
-						 rxd3  =<&pio16 3 ALT2 IN DE_IO 500 CLK_A>;
-						 rxclk =<&pio17 0 ALT2 IN NICLK 0 CLK_A>;
-
-						 clk125=<&pio17 6 ALT1 IN NICLK 0 CLK_A>;
-					};
-				};
-			};
-
-			mmc0 {
-				pinctrl_mmc0: mmc0 {
-					st,pins {
-						mmcclk  = <&pio13 4 ALT4 BIDIR_PU NICLK 0 CLK_B>;
-						data0   = <&pio14 4 ALT4 BIDIR_PU BYPASS 0>;
-						data1   = <&pio14 5 ALT4 BIDIR_PU BYPASS 0>;
-						data2   = <&pio14 6 ALT4 BIDIR_PU BYPASS 0>;
-						data3   = <&pio14 7 ALT4 BIDIR_PU BYPASS 0>;
-						cmd     = <&pio15 1 ALT4 BIDIR_PU BYPASS 0>;
-						wp      = <&pio15 3 ALT4 IN>;
-						data4   = <&pio16 4 ALT4 BIDIR_PU BYPASS 0>;
-						data5   = <&pio16 5 ALT4 BIDIR_PU BYPASS 0>;
-						data6   = <&pio16 6 ALT4 BIDIR_PU BYPASS 0>;
-						data7   = <&pio16 7 ALT4 BIDIR_PU BYPASS 0>;
-						pwr     = <&pio17 1 ALT4 OUT>;
-						cd      = <&pio17 2 ALT4 IN>;
-						led     = <&pio17 3 ALT4 OUT>;
-					};
-				};
-			};
-			mmc1 {
-				pinctrl_mmc1: mmc1 {
-					st,pins {
-						mmcclk  = <&pio15 0 ALT3 BIDIR_PU NICLK 0 CLK_B>;
-						data0   = <&pio13 7 ALT3 BIDIR_PU BYPASS 0>;
-						data1   = <&pio14 1 ALT3 BIDIR_PU BYPASS 0>;
-						data2   = <&pio14 2 ALT3 BIDIR_PU BYPASS 0>;
-						data3   = <&pio14 3 ALT3 BIDIR_PU BYPASS 0>;
-						cmd     = <&pio15 4 ALT3 BIDIR_PU BYPASS 0>;
-						data4   = <&pio15 6 ALT3 BIDIR_PU BYPASS 0>;
-						data5   = <&pio15 7 ALT3 BIDIR_PU BYPASS 0>;
-						data6   = <&pio16 0 ALT3 BIDIR_PU BYPASS 0>;
-						data7   = <&pio16 1 ALT3 BIDIR_PU BYPASS 0>;
-						pwr     = <&pio16 2 ALT3 OUT>;
-						nreset  = <&pio13 6 ALT3 OUT>;
-					};
-				};
-			};
-
-			usb {
-				pinctrl_usb1: usb1 {
-					st,pins {
-						oc-detect = <&pio18 0 ALT1 IN>;
-						pwr-enable = <&pio18 1 ALT1 OUT>;
-					};
-				};
-				pinctrl_usb2: usb2 {
-					st,pins {
-						oc-detect = <&pio18 2 ALT1 IN>;
-						pwr-enable = <&pio18 3 ALT1 OUT>;
-					};
-				};
-			};
-
-			pwm0 {
-				pinctrl_pwm0_chan1_default: pwm0-1-default {
-					st,pins {
-						pwm-out    = <&pio13 2 ALT2 OUT>;
-						pwm-capturein = <&pio13 1 ALT2 IN>;
-					};
-				};
-				pinctrl_pwm0_chan2_default: pwm0-2-default {
-					st,pins {
-						pwm-out    = <&pio15 2 ALT4 OUT>;
-					};
-				};
-				pinctrl_pwm0_chan3_default: pwm0-3-default {
-					st,pins {
-						pwm-out    = <&pio17 4 ALT1 OUT>;
-					};
-				};
-			};
-
-		};
-
-		pin-controller-fvdp-fe {
-			#address-cells	= <1>;
-			#size-cells	= <1>;
-			compatible	= "st,stih416-fvdp-fe-pinctrl";
-			st,syscfg	= <&syscfg_fvdp_fe>;
-			reg 		= <0xfd6bf080 0x4>;
-			reg-names	= "irqmux";
-			interrupts 	= <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names	= "irqmux";
-			ranges		= <0 0xfd6b0000 0x3000>;
-
-			pio100: gpio@fd6b0000 {
-				gpio-controller;
-				#gpio-cells	= <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0 0x100>;
-				st,bank-name	= "PIO100";
-			};
-			pio101: gpio@fd6b1000 {
-				gpio-controller;
-				#gpio-cells	= <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x1000 0x100>;
-				st,bank-name	= "PIO101";
-			};
-			pio102: gpio@fd6b2000 {
-				gpio-controller;
-				#gpio-cells	= <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x2000 0x100>;
-				st,bank-name	= "PIO102";
-			};
-		};
-
-		pin-controller-fvdp-lite {
-			#address-cells	= <1>;
-			#size-cells	= <1>;
-			compatible	= "st,stih416-fvdp-lite-pinctrl";
-			st,syscfg		= <&syscfg_fvdp_lite>;
-			reg 		= <0xfd33f080 0x4>;
-			reg-names	= "irqmux";
-			interrupts 	= <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names	= "irqmux";
-			ranges			= <0 0xfd330000 0x5000>;
-
-			pio103: gpio@fd330000 {
-				gpio-controller;
-				#gpio-cells	= <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0 0x100>;
-				st,bank-name	= "PIO103";
-			};
-			pio104: gpio@fd331000 {
-				gpio-controller;
-				#gpio-cells	= <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x1000 0x100>;
-				st,bank-name	= "PIO104";
-			};
-			pio105: gpio@fd332000 {
-				gpio-controller;
-				#gpio-cells	= <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x2000 0x100>;
-				st,bank-name	= "PIO105";
-			};
-			pio106: gpio@fd333000 {
-				gpio-controller;
-				#gpio-cells	= <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x3000 0x100>;
-				st,bank-name	= "PIO106";
-			};
-
-			pio107: gpio@fd334000 {
-				gpio-controller;
-				#gpio-cells	= <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x4000 0x100>;
-				st,bank-name	= "PIO107";
-				st,retime-pin-mask = <0xf>;
-			};
-		};
-	};
-};