Removing some more old fapi1 and hwp code

Deleted all of the old fapi1 code
Moved potentially reuseable occ code to a new dir
Deleted a variety of p8 hwp files

Change-Id: I8b6ab72fef3f1413d919bdd21bc88f2c4f59c5c3
RTC: 146345
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/23075
Tested-by: Jenkins Server
Tested-by: FSP CI Jenkins
Reviewed-by: Matt Derksen <v2cibmd@us.ibm.com>
Reviewed-by: Christian R. Geddes <crgeddes@us.ibm.com>
Reviewed-by: William G. Hoffa <wghoffa@us.ibm.com>

1 files changed, 0 insertions, 208 deletions

diff --git a/src/usr/hwpf/hwp/runtime_errors/p8_pmc_errors.xml b/src/usr/hwpf/hwp/runtime_errors/p8_pmc_errors.xml
deleted file mode 100644
index 1c29b1fbb..000000000
--- a/src/usr/hwpf/hwp/runtime_errors/p8_pmc_errors.xml
+++ /dev/null
@@ -1,208 +0,0 @@
-<!-- IBM_PROLOG_BEGIN_TAG                                                   -->
-<!-- This is an automatically generated prolog.                             -->
-<!--                                                                        -->
-<!-- $Source: src/usr/hwpf/hwp/runtime_errors/p8_pmc_errors.xml $           -->
-<!--                                                                        -->
-<!-- OpenPOWER HostBoot Project                                             -->
-<!--                                                                        -->
-<!-- COPYRIGHT International Business Machines Corp. 2012,2014              -->
-<!--                                                                        -->
-<!-- Licensed under the Apache License, Version 2.0 (the "License");        -->
-<!-- you may not use this file except in compliance with the License.       -->
-<!-- You may obtain a copy of the License at                                -->
-<!--                                                                        -->
-<!--     http://www.apache.org/licenses/LICENSE-2.0                         -->
-<!--                                                                        -->
-<!-- Unless required by applicable law or agreed to in writing, software    -->
-<!-- distributed under the License is distributed on an "AS IS" BASIS,      -->
-<!-- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or        -->
-<!-- implied. See the License for the specific language governing           -->
-<!-- permissions and limitations under the License.                         -->
-<!--                                                                        -->
-<!-- IBM_PROLOG_END_TAG                                                     -->
-<!-- $Id: p8_pmc_errors.xml,v 1.10 2014/03/10 15:04:05 stillgs Exp $ -->
-<!-- Error definitions for proc_pmc_init and proc_pm_init procedure -->
-<hwpErrors>
-  <!-- *********************************************************************** -->
-  <hwpError>
-    <rc>RC_PROCPM_PMC_CODE_BAD_MODE</rc>
-    <description>Unknown mode passed to proc_pmc_init.</description>
-    <ffdc>MODE</ffdc>
-    <callout>
-      <procedure>CODE</procedure>
-      <priority>HIGH</priority>
-    </callout>
-  </hwpError>
-  <!-- *********************************************************************** -->
-  <hwpError>
-    <rc>RC_PROCPM_PMCINIT_TIMEOUT</rc>
-    <description>time out in polling some register condition.</description>
-    <callout>
-      <procedure>CHIP_IN_ERROR</procedure>
-      <priority>HIGH</priority>
-    </callout>
-  </hwpError>
-  <!-- *********************************************************************** -->
-  <hwpError>
-    <rc>RC_PROCPM_PMCRESET_SPIVID_CONFIG_ERROR</rc>
-    <description>Master target does not have SPIVID ports enabled: check the configuration setup.</description>
-    <ffdc>MASTER_TARGET</ffdc>
-    <ffdc>ATTR_SPIVID_PORT_ENABLE</ffdc>
-    <callout>
-      <procedure>CODE</procedure>
-      <priority>HIGH</priority>
-    </callout>
-  </hwpError>
-  <!-- *********************************************************************** -->
-  <hwpError>
-    <rc>RC_PROCPM_PMCRESET_SCM_INSTALL_ERROR</rc>
-    <description>Error found in DCM installment attribute settings for the SCM case.</description>
-    <ffdc>MASTER_TARGET</ffdc>
-    <ffdc>SLAVE_TARGET</ffdc>
-    <ffdc>DCM_INSTALLED_1</ffdc>
-    <ffdc>DCM_INSTALLED_2</ffdc>
-    <callout>
-      <procedure>CODE</procedure>
-      <priority>HIGH</priority>
-    </callout>
-  </hwpError>
-  <!-- *********************************************************************** -->
-  <hwpError>
-    <rc>RC_PROCPM_PMCRESET_DCM_INSTALL_ERROR</rc>
-    <description>Error found in DCM installment attribute settings.</description>
-    <ffdc>MASTER_TARGET</ffdc>
-    <ffdc>SLAVE_TARGET</ffdc>
-    <ffdc>DCM_INSTALLED_1</ffdc>
-    <ffdc>DCM_INSTALLED_2</ffdc>
-    <callout>
-      <procedure>CODE</procedure>
-      <priority>HIGH</priority>
-    </callout>
-  </hwpError>
-  <!-- *********************************************************************** -->
-  <hwpError>
-    <rc>RC_PROCPM_PMC_MASTER_CONFIG_ERROR</rc>
-    <description>MasterPMC bit of Master PMC is not set.</description>
-    <ffdc>MASTERPMCMODE</ffdc>
-    <callout>
-      <procedure>CODE</procedure>
-      <priority>HIGH</priority>
-    </callout>
-  </hwpError>
-  <!-- *********************************************************************** -->
-  <hwpError>
-    <rc>RC_PROCPM_PMC_SLAVE_CONFIG_ERROR</rc>
-    <description>MasterPMC bit of Slave PMC is not set.</description>
-    <ffdc>SLAVEPMCMODE</ffdc>
-    <callout>
-      <procedure>CODE</procedure>
-      <priority>HIGH</priority>
-    </callout>
-  </hwpError>
-  <!-- *********************************************************************** -->
-  <hwpError>
-    <rc>RC_PROCPM_PMC_INTERCHIP_CONFIG_ERROR</rc>
-    <description>Master is enabled with interchip interface but slave is not.</description>
-    <ffdc>MASTERPMCMODE</ffdc>
-    <ffdc>SLAVEPMCMODE</ffdc>
-    <callout>
-      <procedure>CODE</procedure>
-      <priority>HIGH</priority>
-    </callout>
-  </hwpError>
-  <!-- *********************************************************************** -->
-  <hwpError>
-    <rc>RC_PROCPM_PMC_FW_MODE_ERROR</rc>
-    <description>Master is enabled with FW pstate mode but slave is not </description>
-    <ffdc>MASTERPMCMODE</ffdc>
-    <ffdc>SLAVEPMCMODE</ffdc>
-    <callout>
-      <procedure>CODE</procedure>
-      <priority>HIGH</priority>
-    </callout>
-  </hwpError>
-   <!-- *********************************************************************** -->
-  <hwpError>
-    <rc>RC_PROCPM_PMCRESET_IDLE_ERROR</rc>
-    <description>PMC Idle halt errors exist.  OCC recovery cannot proceed.</description>
-    <ffdc>TARGET</ffdc>
-    <ffdc>PORR</ffdc>
-    <ffdc>PMCSTATUS</ffdc>
-    <callout>
-      <procedure>CODE</procedure>
-      <priority>HIGH</priority>
-    </callout>
-  </hwpError>
-  <!-- *********************************************************************** -->
-  <hwpError>
-    <rc>RC_PROCPM_PMCRESET_IDLE_TIMEOUT_ERROR</rc>
-    <description>Timed out in polling for Idle to Halt. OCC recovery cannot proceed </description>
-    <ffdc>TARGET</ffdc>
-    <ffdc>PORR</ffdc>
-    <ffdc>PMCSTATUS</ffdc>
-    <callout>
-      <procedure>CODE</procedure>
-      <priority>HIGH</priority>
-    </callout>
-  </hwpError>
-  <!-- *********************************************************************** -->
-  <hwpError>
-    <rc>RC_PROCPM_PMCRESET_SPIVID_TIMEOUT_ERROR</rc>
-    <description>Timed out in polling for SPIVID controller to Halt. OCC reset is suspious but carried out</description>
-    <collectRegisterFfdc>
-      <id>REG_FFDC_SPIVID_REGISTERS</id>
-      <target>TARGET</target>
-    </collectRegisterFfdc>
-    <!-- No callout as this only logs data for use if the PMC reset (part of the OCC reset) actually fails -->
-  </hwpError>
-  <!-- *********************************************************************** -->
-  <hwpError>
-    <rc>RC_PROCPM_PMCRESET_INTCHP_TIMEOUT_ERROR</rc>
-    <description>Timed out in polling for InterChip Interface to Halt. OCC reset is suspious but carried out</description>
-    <collectRegisterFfdc>
-      <id>REG_FFDC_PSTATE_REGISTERS</id>
-      <id>REG_FFDC_SPIVID_REGISTERS</id>
-      <target>THISTARGET</target>
-    </collectRegisterFfdc>
-    <collectRegisterFfdc>
-      <id>REG_FFDC_PSTATE_REGISTERS</id>
-      <id>REG_FFDC_SPIVID_REGISTERS</id>
-      <target>DCMTARGET</target>
-    </collectRegisterFfdc>
-    <!-- No callout as this only logs data for use if the PMC reset (part of the OCC reset) actually fails -->
-  </hwpError>
-  <!-- *********************************************************************** -->
-  <hwpError>
-    <rc>RC_PROCPM_PMCRESET_O2P_TIMEOUT_ERROR</rc>
-    <description>Timed out in polling for OCI to PIB Bridge to Halt. OCC reset is suspious but carried out</description>
-    <ffdc>TARGET</ffdc>
-    <ffdc>O2PSTATUS</ffdc>
-    <!-- No callout as this only logs data for use if the PMC reset (part of the OCC reset) actually fails -->
-  </hwpError>
-  <!-- *********************************************************************** -->
-  <hwpError>
-    <rc>RC_PROCPM_PMCINIT_SCM_INSTALL_ERROR</rc>
-    <description>Error found in DCM installment attribute settings for the SCM case in the PMC INIT phase..</description>
-    <ffdc>MASTER_TARGET</ffdc>
-    <ffdc>SLAVE_TARGET</ffdc>
-    <ffdc>DCM_INSTALLED_1</ffdc>
-    <ffdc>DCM_INSTALLED_2</ffdc>
-    <callout>
-      <procedure>CODE</procedure>
-      <priority>HIGH</priority>
-    </callout>
-  </hwpError>
-  <!-- *********************************************************************** -->
-  <hwpError>
-    <rc>RC_PROCPM_PMCINIT_DCM_INSTALL_ERROR</rc>
-    <description>Error found in DCM installment attribute settings in the PMC INIT phase.</description>
-    <ffdc>MASTER_TARGET</ffdc>
-    <ffdc>SLAVE_TARGET</ffdc>
-    <ffdc>DCM_INSTALLED_1</ffdc>
-    <ffdc>DCM_INSTALLED_2</ffdc>
-    <callout>
-      <procedure>CODE</procedure>
-      <priority>HIGH</priority>
-    </callout>
-  </hwpError>
-</hwpErrors>