diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/configs/A3000.h | 293 | ||||
| -rw-r--r-- | include/configs/CPC45.h | 489 | ||||
| -rw-r--r-- | include/configs/CU824.h | 286 | ||||
| -rw-r--r-- | include/configs/MUSENKI.h | 275 | ||||
| -rw-r--r-- | include/configs/MVBLUE.h | 325 | ||||
| -rw-r--r-- | include/configs/Sandpoint8240.h | 398 | ||||
| -rw-r--r-- | include/configs/Sandpoint8245.h | 376 | ||||
| -rw-r--r-- | include/configs/eXalion.h | 433 | ||||
| -rw-r--r-- | include/configs/utx8245.h | 408 | ||||
| -rw-r--r-- | include/mpc824x.h | 523 | ||||
| -rw-r--r-- | include/pci.h | 4 | ||||
| -rw-r--r-- | include/pcmcia/cirrus.h | 180 | ||||
| -rw-r--r-- | include/pcmcia/i82365.h | 154 | ||||
| -rw-r--r-- | include/pcmcia/ss.h | 133 | ||||
| -rw-r--r-- | include/pcmcia/ti113x.h | 234 | ||||
| -rw-r--r-- | include/ppc_asm.tmpl | 4 |
16 files changed, 2 insertions, 4513 deletions
diff --git a/include/configs/A3000.h b/include/configs/A3000.h deleted file mode 100644 index 35e3e6fa8b..0000000000 --- a/include/configs/A3000.h +++ /dev/null @@ -1,293 +0,0 @@ -/* - * (C) Copyright 2001, 2002, 2003 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* ------------------------------------------------------------------------- */ -/* - * Configuration settings for the A-3000 board (Artis Microsystems Inc.). - * http://artismicro.com - */ - -/* ------------------------------------------------------------------------- */ - -/* - * board/config.h - configuration options, board specific - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_MPC8245 1 -#define CONFIG_A3000 1 - -#define CONFIG_SYS_TEXT_BASE 0xFFF00000 - -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 9600 - -#define CONFIG_BOOTDELAY 5 - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - - -/* - * Miscellaneous configurable options - */ -#undef CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "A3000> " /* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ - -/* Print Buffer Size - */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 8 /* Max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_LOAD_ADDR 0x00400000 /* Default load address */ - -/*----------------------------------------------------------------------- - * PCI stuff - *----------------------------------------------------------------------- - */ -#define CONFIG_HARD_I2C 1 /* To enable I2C support */ -#undef CONFIG_SYS_I2C_SOFT /* I2C bit-banged */ -#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ -#define CONFIG_SYS_I2C_SLAVE 0x7F - -/*----------------------------------------------------------------------- - * PCI stuff - *----------------------------------------------------------------------- - */ -#define CONFIG_PCI /* include pci support */ -#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ -#undef CONFIG_PCI_PNP -#define CONFIG_PCI_SCAN_SHOW /* print pci devices @ startup */ - - -/* #define CONFIG_TULIP */ -/* #define CONFIG_EEPRO100 */ -#define CONFIG_NATSEMI - -#define PCI_ENET0_IOADDR 0x80000000 -#define PCI_ENET0_MEMADDR 0x80000000 -#define PCI_ENET1_IOADDR 0x81000000 -#define PCI_ENET1_MEMADDR 0x81000000 -#define PCI_ENET2_IOADDR 0x82000000 -#define PCI_ENET2_MEMADDR 0x82000000 -#define PCI_ENET3_IOADDR 0x83000000 -#define PCI_ENET3_MEMADDR 0x83000000 - - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 - -#define CONFIG_SYS_FLASH_BASE0_PRELIM 0xFF000000 /* FLASH bank on RCS#0 */ -#define CONFIG_SYS_FLASH_BASE1_PRELIM 0xFF000000 /* FLASH bank on RCS#1 */ -#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_FLASH_BASE0_PRELIM -#define CONFIG_SYS_FLASH_BANKS { CONFIG_SYS_FLASH_BASE0_PRELIM } - -/* even though FLASHP_BASE is FF800000, with 4MB is RCS0, the - * reset vector is actually located at FFB00100, but the 8245 - * takes care of us. - */ -#define CONFIG_SYS_RESET_ADDRESS 0xFFF00100 - -#define CONFIG_SYS_EUMB_ADDR 0xFC000000 - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ - -#define CONFIG_SYS_MEMTEST_START 0x00004000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x02000000 /* 0 ... 32 MB in DRAM */ - - /* Maximum amount of RAM. - */ -#define CONFIG_SYS_MAX_RAM_SIZE 0x04000000 /* 0 .. 128 MB of (S)DRAM */ - - -#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE -#undef CONFIG_SYS_RAMBOOT -#else -#define CONFIG_SYS_RAMBOOT -#endif - -/* - * NS16550 Configuration - */ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL - -#define CONFIG_SYS_NS16550_REG_SIZE 1 - -#define CONFIG_SYS_NS16550_CLK get_bus_freq(0) - -#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_EUMB_ADDR + 0x4500) -#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_EUMB_ADDR + 0x4600) - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area - */ - -/* #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE */ -#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - - -/* - * Low Level Configuration Settings - * (address mappings, register initial values, etc.) - * You should know what you are doing if you make changes here. - * For the detail description refer to the MPC8240 user's manual. - */ - -#define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */ - - /* Bit-field values for MCCR1. - */ -#define CONFIG_SYS_ROMNAL 7 -#define CONFIG_SYS_ROMFAL 11 -#define CONFIG_SYS_DBUS_SIZE 0x3 - - /* Bit-field values for MCCR2. - */ -#define CONFIG_SYS_TSWAIT 0x5 /* Transaction Start Wait States timer */ -#define CONFIG_SYS_REFINT 0x400 /* Refresh interval FIXME: was 0t430 */ - - /* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4. - */ -#define CONFIG_SYS_BSTOPRE 121 - - /* Bit-field values for MCCR3. - */ -#define CONFIG_SYS_REFREC 8 /* Refresh to activate interval */ - - /* Bit-field values for MCCR4. - */ -#define CONFIG_SYS_PRETOACT 3 /* Precharge to activate interval FIXME: was 2 */ -#define CONFIG_SYS_ACTTOPRE 5 /* Activate to Precharge interval FIXME: was 5 */ -#define CONFIG_SYS_ACTORW 3 /* FIXME was 2 */ -#define CONFIG_SYS_SDMODE_CAS_LAT 3 /* SDMODE CAS latancy */ -#define CONFIG_SYS_SDMODE_WRAP 0 /* SDMODE wrap type */ -#define CONFIG_SYS_REGISTERD_TYPE_BUFFER 1 -#define CONFIG_SYS_EXTROM 1 -#define CONFIG_SYS_REGDIMM 0 - -#define CONFIG_SYS_PGMAX 0x32 /* how long the 8240 reatins the currently accessed page in memory FIXME: was 0x32*/ - -#define CONFIG_SYS_SDRAM_DSCD 0x20 /* SDRAM data in sample clock delay - note bottom 3 bits MUST be 0 */ - -/* Memory bank settings. - * Only bits 20-29 are actually used from these vales to set the - * start/end addresses. The upper two bits will always be 0, and the lower - * 20 bits will be 0x00000 for a start address, or 0xfffff for an end - * address. Refer to the MPC8240 book. - */ - -#define CONFIG_SYS_BANK0_START 0x00000000 -#define CONFIG_SYS_BANK0_END (CONFIG_SYS_MAX_RAM_SIZE - 1) -#define CONFIG_SYS_BANK0_ENABLE 1 -#define CONFIG_SYS_BANK1_START 0x3ff00000 -#define CONFIG_SYS_BANK1_END 0x3fffffff -#define CONFIG_SYS_BANK1_ENABLE 0 -#define CONFIG_SYS_BANK2_START 0x3ff00000 -#define CONFIG_SYS_BANK2_END 0x3fffffff -#define CONFIG_SYS_BANK2_ENABLE 0 -#define CONFIG_SYS_BANK3_START 0x3ff00000 -#define CONFIG_SYS_BANK3_END 0x3fffffff -#define CONFIG_SYS_BANK3_ENABLE 0 -#define CONFIG_SYS_BANK4_START 0x3ff00000 -#define CONFIG_SYS_BANK4_END 0x3fffffff -#define CONFIG_SYS_BANK4_ENABLE 0 -#define CONFIG_SYS_BANK5_START 0x3ff00000 -#define CONFIG_SYS_BANK5_END 0x3fffffff -#define CONFIG_SYS_BANK5_ENABLE 0 -#define CONFIG_SYS_BANK6_START 0x3ff00000 -#define CONFIG_SYS_BANK6_END 0x3fffffff -#define CONFIG_SYS_BANK6_ENABLE 0 -#define CONFIG_SYS_BANK7_START 0x3ff00000 -#define CONFIG_SYS_BANK7_END 0x3fffffff -#define CONFIG_SYS_BANK7_ENABLE 0 - -#define CONFIG_SYS_ODCR 0xff - -#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) - -#define CONFIG_SYS_IBAT1L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT1U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP) - -#define CONFIG_SYS_IBAT2L (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT) -#define CONFIG_SYS_IBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP) - -#define CONFIG_SYS_IBAT3L (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT) -#define CONFIG_SYS_IBAT3U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP) - -#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L -#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U -#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L -#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U -#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L -#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U -#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L -#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/*----------------------------------------------------------------------- - * FLASH organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* Max number of flash banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 128 /* Max number of sectors per flash */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ - - - /* Warining: environment is not EMBEDDED in the U-Boot code. - * It's stored in flash separately. - */ -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_ADDR 0xFFFE0000 -#define CONFIG_ENV_SIZE 0x00020000 /* Size of the Environment */ -#define CONFIG_ENV_SECT_SIZE 0x00020000 /* Size of the Environment Sector */ - -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_CACHELINE_SIZE 32 -#if defined(CONFIG_CMD_KGDB) -# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - -#endif /* __CONFIG_H */ diff --git a/include/configs/CPC45.h b/include/configs/CPC45.h deleted file mode 100644 index a75c52f2c7..0000000000 --- a/include/configs/CPC45.h +++ /dev/null @@ -1,489 +0,0 @@ -/* - * (C) Copyright 2001-2005 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * - * Configuration settings for the CPC45 board. - * - */ - -/* ------------------------------------------------------------------------- */ - -/* - * board/config.h - configuration options, board specific - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_MPC8245 1 -#define CONFIG_CPC45 1 - -#define CONFIG_SYS_TEXT_BASE 0xFFF00000 - -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 9600 - -#define CONFIG_PREBOOT "echo;echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;echo" - -#define CONFIG_BOOTDELAY 5 - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_BOOTP_BOOTPATH - -#define CONFIG_BOOTP_BOOTFILESIZE - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_BEDBUG -#define CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT -#define CONFIG_CMD_FLASH -#define CONFIG_CMD_I2C -#define CONFIG_CMD_IDE -#define CONFIG_CMD_NFS -#define CONFIG_CMD_PCI -#define CONFIG_CMD_PING -#define CONFIG_CMD_SDRAM -#define CONFIG_CMD_SNTP - - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ - -#if 1 -#define CONFIG_SYS_HUSH_PARSER 1 /* use "hush" command parser */ -#endif - -/* Print Buffer Size - */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) - -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_LOAD_ADDR 0x00100000 /* Default load address */ - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ - -#define CONFIG_SYS_SDRAM_BASE 0x00000000 - -#if defined(CONFIG_BOOT_ROM) -#define CONFIG_SYS_FLASH_BASE 0xFF000000 -#else -#define CONFIG_SYS_FLASH_BASE 0xFF800000 -#endif - -#define CONFIG_SYS_RESET_ADDRESS 0xFFF00100 - -#define CONFIG_SYS_EUMB_ADDR 0xFCE00000 - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE - -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ - -#define CONFIG_SYS_MEMTEST_START 0x00004000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x02000000 /* 0 ... 32 MB in DRAM */ - -/* Maximum amount of RAM. - */ -#define CONFIG_SYS_MAX_RAM_SIZE 0x10000000 - - -#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE -#undef CONFIG_SYS_RAMBOOT -#else -#define CONFIG_SYS_RAMBOOT -#endif - - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area - */ - -#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - -/* - * NS16550 Configuration - */ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL - -#define CONFIG_SYS_NS16550_REG_SIZE 1 - -#define CONFIG_SYS_NS16550_CLK get_bus_freq(0) - -#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_EUMB_ADDR + 0x4500) -#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_EUMB_ADDR + 0x4600) -#define DUART_DCR (CONFIG_SYS_EUMB_ADDR + 0x4511) - -/* - * I2C configuration - */ -#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ - -#define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */ -#define CONFIG_SYS_I2C_SLAVE 0x7F - -/* - * RTC configuration - */ -#define CONFIG_RTC_PCF8563 -#define CONFIG_SYS_I2C_RTC_ADDR 0x51 - -/* - * EEPROM configuration - */ -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x58 -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 -#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 0x07 - -/* - * Low Level Configuration Settings - * (address mappings, register initial values, etc.) - * You should know what you are doing if you make changes here. - * For the detail description refer to the MPC8240 user's manual. - */ - -#define CONFIG_SYS_CLK_FREQ 33000000 - - -/* Bit-field values for MCCR1. - */ -#define CONFIG_SYS_ROMNAL 0 -#define CONFIG_SYS_ROMFAL 8 - -#define CONFIG_SYS_BANK0_ROW 0 /* SDRAM bank 7-0 row address */ -#define CONFIG_SYS_BANK1_ROW 0 -#define CONFIG_SYS_BANK2_ROW 0 -#define CONFIG_SYS_BANK3_ROW 0 -#define CONFIG_SYS_BANK4_ROW 0 -#define CONFIG_SYS_BANK5_ROW 0 -#define CONFIG_SYS_BANK6_ROW 0 -#define CONFIG_SYS_BANK7_ROW 0 - -/* Bit-field values for MCCR2. - */ - -#define CONFIG_SYS_REFINT 0x2ec - -/* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4. - */ -#define CONFIG_SYS_BSTOPRE 160 - -/* Bit-field values for MCCR3. - */ -#define CONFIG_SYS_REFREC 2 /* Refresh to activate interval */ -#define CONFIG_SYS_RDLAT 0 /* Data latancy from read command */ - -/* Bit-field values for MCCR4. - */ -#define CONFIG_SYS_PRETOACT 2 /* Precharge to activate interval */ -#define CONFIG_SYS_ACTTOPRE 5 /* Activate to Precharge interval */ -#define CONFIG_SYS_SDMODE_CAS_LAT 2 /* SDMODE CAS latancy */ -#define CONFIG_SYS_SDMODE_WRAP 0 /* SDMODE wrap type */ -#define CONFIG_SYS_SDMODE_BURSTLEN 2 /* SDMODE Burst length */ -#define CONFIG_SYS_ACTORW 2 -#define CONFIG_SYS_REGISTERD_TYPE_BUFFER 1 -#define CONFIG_SYS_EXTROM 0 -#define CONFIG_SYS_REGDIMM 0 - -/* Memory bank settings. - * Only bits 20-29 are actually used from these vales to set the - * start/end addresses. The upper two bits will always be 0, and the lower - * 20 bits will be 0x00000 for a start address, or 0xfffff for an end - * address. Refer to the MPC8240 book. - */ - -#define CONFIG_SYS_BANK0_START 0x00000000 -#define CONFIG_SYS_BANK0_END (CONFIG_SYS_MAX_RAM_SIZE - 1) -#define CONFIG_SYS_BANK0_ENABLE 1 -#define CONFIG_SYS_BANK1_START 0x3ff00000 -#define CONFIG_SYS_BANK1_END 0x3fffffff -#define CONFIG_SYS_BANK1_ENABLE 0 -#define CONFIG_SYS_BANK2_START 0x3ff00000 -#define CONFIG_SYS_BANK2_END 0x3fffffff -#define CONFIG_SYS_BANK2_ENABLE 0 -#define CONFIG_SYS_BANK3_START 0x3ff00000 -#define CONFIG_SYS_BANK3_END 0x3fffffff -#define CONFIG_SYS_BANK3_ENABLE 0 -#define CONFIG_SYS_BANK4_START 0x3ff00000 -#define CONFIG_SYS_BANK4_END 0x3fffffff -#define CONFIG_SYS_BANK4_ENABLE 0 -#define CONFIG_SYS_BANK5_START 0x3ff00000 -#define CONFIG_SYS_BANK5_END 0x3fffffff -#define CONFIG_SYS_BANK5_ENABLE 0 -#define CONFIG_SYS_BANK6_START 0x3ff00000 -#define CONFIG_SYS_BANK6_END 0x3fffffff -#define CONFIG_SYS_BANK6_ENABLE 0 -#define CONFIG_SYS_BANK7_START 0x3ff00000 -#define CONFIG_SYS_BANK7_END 0x3fffffff -#define CONFIG_SYS_BANK7_ENABLE 0 - -#define CONFIG_SYS_ODCR 0xff -#define CONFIG_SYS_PGMAX 0x32 /* how long the 8240 retains the */ - /* currently accessed page in memory */ - /* see 8240 book for details */ - -#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) - -#define CONFIG_SYS_IBAT1L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT1U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP) - -#define CONFIG_SYS_IBAT2L (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT) -#define CONFIG_SYS_IBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP) - -#define CONFIG_SYS_IBAT3L (0xFC000000 | BATL_PP_10 | BATL_CACHEINHIBIT) -#define CONFIG_SYS_IBAT3U (0xFC000000 | BATU_BL_64M | BATU_VS | BATU_VP) - -#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L -#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U -#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L -#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U -#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L -#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U -#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L -#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/*----------------------------------------------------------------------- - * FLASH organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* Max number of flash banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 39 /* Max number of sectors in one bank */ -#define INTEL_ID_28F160F3T 0x88F388F3 /* 16M = 1M x 16 top boot sector */ -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ - - /* Warining: environment is not EMBEDDED in the ppcboot code. - * It's stored in flash separately. - */ -#define CONFIG_ENV_IS_IN_FLASH 1 - -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x7F8000) -#define CONFIG_ENV_SIZE 0x4000 /* Size of the Environment */ -#define CONFIG_ENV_OFFSET 0 /* starting right at the beginning */ -#define CONFIG_ENV_SECT_SIZE 0x8000 /* Size of the Environment Sector */ - -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_CACHELINE_SIZE 32 -#if defined(CONFIG_CMD_KGDB) -# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - -/*----------------------------------------------------------------------*/ -/* CPC45 Memory Map */ -/*----------------------------------------------------------------------*/ -#define SRAM_BASE 0x80000000 /* SRAM base address */ -#define SRAM_END 0x801FFFFF -#define ST16552_A_BASE 0x80200000 /* ST16552 channel A */ -#define ST16552_B_BASE 0x80400000 /* ST16552 channel A */ -#define BCSR_BASE 0x80600000 /* board control / status registers */ -#define DISPLAY_BASE 0x80600040 /* DISPLAY base */ -#define PCMCIA_MEM_BASE 0x83000000 /* PCMCIA memory window base */ -#define PCMCIA_IO_BASE 0xFE000000 /* PCMCIA IO window base */ - -#define CONFIG_SYS_SRAM_BASE SRAM_BASE -#define CONFIG_SYS_SRAM_SIZE (SRAM_END - SRAM_BASE + 1) - -/*---------------------------------------------------------------------*/ -/* CPC45 Control/Status Registers */ -/*---------------------------------------------------------------------*/ -#define IRQ_ENA_1 *((volatile uchar*)(BCSR_BASE + 0x00)) -#define IRQ_STAT_1 *((volatile uchar*)(BCSR_BASE + 0x01)) -#define IRQ_ENA_2 *((volatile uchar*)(BCSR_BASE + 0x02)) -#define IRQ_STAT_2 *((volatile uchar*)(BCSR_BASE + 0x03)) -#define BOARD_CTRL *((volatile uchar*)(BCSR_BASE + 0x04)) -#define BOARD_STAT *((volatile uchar*)(BCSR_BASE + 0x05)) -#define WDG_START *((volatile uchar*)(BCSR_BASE + 0x06)) -#define WDG_PRESTOP *((volatile uchar*)(BCSR_BASE + 0x06)) -#define WDG_STOP *((volatile uchar*)(BCSR_BASE + 0x06)) -#define BOARD_REV *((volatile uchar*)(BCSR_BASE + 0x07)) - -/* IRQ_ENA_1 bit definitions */ -#define I_ENA_1_IERA 0x80 /* INTA enable */ -#define I_ENA_1_IERB 0x40 /* INTB enable */ -#define I_ENA_1_IERC 0x20 /* INTC enable */ -#define I_ENA_1_IERD 0x10 /* INTD enable */ - -/* IRQ_STAT_1 bit definitions */ -#define I_STAT_1_INTA 0x80 /* INTA status */ -#define I_STAT_1_INTB 0x40 /* INTB status */ -#define I_STAT_1_INTC 0x20 /* INTC status */ -#define I_STAT_1_INTD 0x10 /* INTD status */ - -/* IRQ_ENA_2 bit definitions */ -#define I_ENA_2_IEAB 0x80 /* ABORT IRQ enable */ -#define I_ENA_2_IEK1 0x40 /* KEY1 IRQ enable */ -#define I_ENA_2_IEK2 0x20 /* KEY2 IRQ enable */ -#define I_ENA_2_IERT 0x10 /* RTC IRQ enable */ -#define I_ENA_2_IESM 0x08 /* LM81 IRQ enable */ -#define I_ENA_2_IEDG 0x04 /* DEGENERATING IRQ enable */ -#define I_ENA_2_IES2 0x02 /* ST16552/B IRQ enable */ -#define I_ENA_2_IES1 0x01 /* ST16552/A IRQ enable */ - -/* IRQ_STAT_2 bit definitions */ -#define I_STAT_2_ABO 0x80 /* ABORT IRQ status */ -#define I_STAT_2_KY1 0x40 /* KEY1 IRQ status */ -#define I_STAT_2_KY2 0x20 /* KEY2 IRQ status */ -#define I_STAT_2_RTC 0x10 /* RTC IRQ status */ -#define I_STAT_2_SMN 0x08 /* LM81 IRQ status */ -#define I_STAT_2_DEG 0x04 /* DEGENERATING IRQ status */ -#define I_STAT_2_SIO2 0x02 /* ST16552/B IRQ status */ -#define I_STAT_2_SIO1 0x01 /* ST16552/A IRQ status */ - -/* BOARD_CTRL bit definitions */ -#define USER_LEDS 2 /* 2 user LEDs */ - -#if (USER_LEDS == 4) -#define B_CTRL_WRSE 0x80 -#define B_CTRL_KRSE 0x40 -#define B_CTRL_FWRE 0x20 /* Flash write enable */ -#define B_CTRL_FWPT 0x10 /* Flash write protect */ -#define B_CTRL_LED3 0x08 /* LED 3 control */ -#define B_CTRL_LED2 0x04 /* LED 2 control */ -#define B_CTRL_LED1 0x02 /* LED 1 control */ -#define B_CTRL_LED0 0x01 /* LED 0 control */ -#else -#define B_CTRL_WRSE 0x80 -#define B_CTRL_KRSE 0x40 -#define B_CTRL_FWRE_1 0x20 /* Flash write enable */ -#define B_CTRL_FWPT_1 0x10 /* Flash write protect */ -#define B_CTRL_LED1 0x08 /* LED 1 control */ -#define B_CTRL_LED0 0x04 /* LED 0 control */ -#define B_CTRL_FWRE_0 0x02 /* Flash write enable */ -#define B_CTRL_FWPT_0 0x01 /* Flash write protect */ -#endif - -/* BOARD_STAT bit definitions */ -#define B_STAT_WDGE 0x80 -#define B_STAT_WDGS 0x40 -#define B_STAT_WRST 0x20 -#define B_STAT_KRST 0x10 -#define B_STAT_CSW3 0x08 /* sitch bit 3 status */ -#define B_STAT_CSW2 0x04 /* sitch bit 2 status */ -#define B_STAT_CSW1 0x02 /* sitch bit 1 status */ -#define B_STAT_CSW0 0x01 /* sitch bit 0 status */ - -/*---------------------------------------------------------------------*/ -/* Display addresses */ -/*---------------------------------------------------------------------*/ -#define DISP_UDC_RAM (DISPLAY_BASE + 0x08) /* UDC RAM */ -#define DISP_CHR_RAM (DISPLAY_BASE + 0x18) /* character Ram */ -#define DISP_FLASH (DISPLAY_BASE + 0x20) /* Flash Ram */ - -#define DISP_UDC_ADR *((volatile uchar*)(DISPLAY_BASE + 0x00)) /* UDC Address Reg. */ -#define DISP_CWORD *((volatile uchar*)(DISPLAY_BASE + 0x10)) /* Control Word Reg. */ - -#define DISP_DIG0 *((volatile uchar*)(DISP_CHR_RAM + 0x00)) /* Digit 0 address */ -#define DISP_DIG1 *((volatile uchar*)(DISP_CHR_RAM + 0x01)) /* Digit 0 address */ -#define DISP_DIG2 *((volatile uchar*)(DISP_CHR_RAM + 0x02)) /* Digit 0 address */ -#define DISP_DIG3 *((volatile uchar*)(DISP_CHR_RAM + 0x03)) /* Digit 0 address */ -#define DISP_DIG4 *((volatile uchar*)(DISP_CHR_RAM + 0x04)) /* Digit 0 address */ -#define DISP_DIG5 *((volatile uchar*)(DISP_CHR_RAM + 0x05)) /* Digit 0 address */ -#define DISP_DIG6 *((volatile uchar*)(DISP_CHR_RAM + 0x06)) /* Digit 0 address */ -#define DISP_DIG7 *((volatile uchar*)(DISP_CHR_RAM + 0x07)) /* Digit 0 address */ - - -/*----------------------------------------------------------------------- - * PCI stuff - *----------------------------------------------------------------------- - */ -#define CONFIG_PCI /* include pci support */ -#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ -#define CONFIG_SYS_EARLY_PCI_INIT -#undef CONFIG_PCI_PNP -#undef CONFIG_PCI_SCAN_SHOW - - -#define CONFIG_EEPRO100 -#define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ - -#define PCI_ENET0_IOADDR 0x82000000 -#define PCI_ENET0_MEMADDR 0x82000000 -#define PCI_PLX9030_IOADDR 0x82100000 -#define PCI_PLX9030_MEMADDR 0x82100000 - -/*----------------------------------------------------------------------- - * PCMCIA stuff - *----------------------------------------------------------------------- - */ - -#define CONFIG_I82365 - -#define CONFIG_SYS_PCMCIA_MEM_ADDR PCMCIA_MEM_BASE -#define CONFIG_SYS_PCMCIA_MEM_SIZE 0x1000 - -#define CONFIG_PCMCIA_SLOT_A - -/*----------------------------------------------------------------------- - * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter) - *----------------------------------------------------------------------- - */ - -#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */ -#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */ - -#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ -#undef CONFIG_IDE_RESET /* reset for IDE not supported */ -#define CONFIG_IDE_LED /* LED for IDE is supported */ - -#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */ -#define CONFIG_SYS_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */ - -#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 - -#define CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_PCMCIA_MEM_ADDR - -#define CONFIG_SYS_ATA_DATA_OFFSET CONFIG_SYS_PCMCIA_MEM_SIZE - -/* Offset for normal register accesses */ -#define CONFIG_SYS_ATA_REG_OFFSET (CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320) - -/* Offset for alternate registers */ -#define CONFIG_SYS_ATA_ALT_OFFSET (CONFIG_SYS_PCMCIA_MEM_SIZE + 0x400) - -#define CONFIG_DOS_PARTITION - -#endif /* __CONFIG_H */ diff --git a/include/configs/CU824.h b/include/configs/CU824.h deleted file mode 100644 index dc98a560c8..0000000000 --- a/include/configs/CU824.h +++ /dev/null @@ -1,286 +0,0 @@ -/* - * (C) Copyright 2001-2005 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * - * Configuration settings for the CU824 board. - * - */ - -/* ------------------------------------------------------------------------- */ - -/* - * board/config.h - configuration options, board specific - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_MPC8240 1 -#define CONFIG_CU824 1 - -#define CONFIG_SYS_TEXT_BASE 0xFFF00000 - -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 9600 - -#define CONFIG_PREBOOT "echo;echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;echo" - -#define CONFIG_BOOTCOMMAND "bootm FE020000" /* autoboot command */ -#define CONFIG_BOOTDELAY 5 - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_BOOTFILESIZE - - -#define CONFIG_TIMESTAMP /* Print image info with timestamp */ - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_BEDBUG -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_PCI -#define CONFIG_CMD_NFS -#define CONFIG_CMD_SNTP - - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ - -#if 1 -#define CONFIG_SYS_HUSH_PARSER 1 /* use "hush" command parser */ -#endif - -/* Print Buffer Size - */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) - -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_LOAD_ADDR 0x00100000 /* Default load address */ - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_FLASH_BASE 0xFF000000 - -#define CONFIG_SYS_RESET_ADDRESS 0xFFF00100 - -#define CONFIG_SYS_EUMB_ADDR 0xFCE00000 - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE - -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ - -#define CONFIG_SYS_MEMTEST_START 0x00004000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x02000000 /* 0 ... 32 MB in DRAM */ - - /* Maximum amount of RAM. - */ -#define CONFIG_SYS_MAX_RAM_SIZE 0x10000000 - - -#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE -#undef CONFIG_SYS_RAMBOOT -#else -#define CONFIG_SYS_RAMBOOT -#endif - - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area - */ - -#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - -/* - * NS16550 Configuration - */ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL - -#define CONFIG_SYS_NS16550_REG_SIZE 4 - -#define CONFIG_SYS_NS16550_CLK (14745600 / 2) - -#define CONFIG_SYS_NS16550_COM1 0xFE800080 -#define CONFIG_SYS_NS16550_COM2 0xFE8000C0 - -/* - * Low Level Configuration Settings - * (address mappings, register initial values, etc.) - * You should know what you are doing if you make changes here. - * For the detail description refer to the MPC8240 user's manual. - */ - -#define CONFIG_SYS_CLK_FREQ 33000000 - - /* Bit-field values for MCCR1. - */ -#define CONFIG_SYS_ROMNAL 0 -#define CONFIG_SYS_ROMFAL 7 - - /* Bit-field values for MCCR2. - */ -#define CONFIG_SYS_REFINT 430 /* Refresh interval */ - - /* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4. - */ -#define CONFIG_SYS_BSTOPRE 192 - - /* Bit-field values for MCCR3. - */ -#define CONFIG_SYS_REFREC 2 /* Refresh to activate interval */ -#define CONFIG_SYS_RDLAT 3 /* Data latancy from read command */ - - /* Bit-field values for MCCR4. - */ -#define CONFIG_SYS_PRETOACT 2 /* Precharge to activate interval */ -#define CONFIG_SYS_ACTTOPRE 5 /* Activate to Precharge interval */ -#define CONFIG_SYS_SDMODE_CAS_LAT 2 /* SDMODE CAS latancy */ -#define CONFIG_SYS_SDMODE_WRAP 0 /* SDMODE wrap type */ -#define CONFIG_SYS_SDMODE_BURSTLEN 2 /* SDMODE Burst length */ -#define CONFIG_SYS_ACTORW 2 -#define CONFIG_SYS_REGISTERD_TYPE_BUFFER 1 - -/* Memory bank settings. - * Only bits 20-29 are actually used from these vales to set the - * start/end addresses. The upper two bits will always be 0, and the lower - * 20 bits will be 0x00000 for a start address, or 0xfffff for an end - * address. Refer to the MPC8240 book. - */ - -#define CONFIG_SYS_BANK0_START 0x00000000 -#define CONFIG_SYS_BANK0_END (CONFIG_SYS_MAX_RAM_SIZE - 1) -#define CONFIG_SYS_BANK0_ENABLE 1 -#define CONFIG_SYS_BANK1_START 0x3ff00000 -#define CONFIG_SYS_BANK1_END 0x3fffffff -#define CONFIG_SYS_BANK1_ENABLE 0 -#define CONFIG_SYS_BANK2_START 0x3ff00000 -#define CONFIG_SYS_BANK2_END 0x3fffffff -#define CONFIG_SYS_BANK2_ENABLE 0 -#define CONFIG_SYS_BANK3_START 0x3ff00000 -#define CONFIG_SYS_BANK3_END 0x3fffffff -#define CONFIG_SYS_BANK3_ENABLE 0 -#define CONFIG_SYS_BANK4_START 0x3ff00000 -#define CONFIG_SYS_BANK4_END 0x3fffffff -#define CONFIG_SYS_BANK4_ENABLE 0 -#define CONFIG_SYS_BANK5_START 0x3ff00000 -#define CONFIG_SYS_BANK5_END 0x3fffffff -#define CONFIG_SYS_BANK5_ENABLE 0 -#define CONFIG_SYS_BANK6_START 0x3ff00000 -#define CONFIG_SYS_BANK6_END 0x3fffffff -#define CONFIG_SYS_BANK6_ENABLE 0 -#define CONFIG_SYS_BANK7_START 0x3ff00000 -#define CONFIG_SYS_BANK7_END 0x3fffffff -#define CONFIG_SYS_BANK7_ENABLE 0 - -#define CONFIG_SYS_ODCR 0xff - -#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) - -#define CONFIG_SYS_IBAT1L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT1U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP) - -#define CONFIG_SYS_IBAT2L (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT) -#define CONFIG_SYS_IBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP) - -#define CONFIG_SYS_IBAT3L (0xFC000000 | BATL_PP_10 | BATL_CACHEINHIBIT) -#define CONFIG_SYS_IBAT3U (0xFC000000 | BATU_BL_64M | BATU_VS | BATU_VP) - -#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L -#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U -#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L -#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U -#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L -#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U -#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L -#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/*----------------------------------------------------------------------- - * FLASH organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* Max number of flash banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 39 /* Max number of sectors in one bank */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ - - /* Warining: environment is not EMBEDDED in the U-Boot code. - * It's stored in flash separately. - */ -#define CONFIG_ENV_IS_IN_FLASH 1 -#if 0 -#define CONFIG_ENV_ADDR 0xFF008000 -#define CONFIG_ENV_SIZE 0x8000 /* Size of the Environment Sector */ -#else -#define CONFIG_ENV_ADDR 0xFFFC0000 -#define CONFIG_ENV_SIZE 0x4000 /* Size of the Environment */ -#define CONFIG_ENV_OFFSET 0 /* starting right at the beginning */ -#define CONFIG_ENV_SECT_SIZE 0x40000 /* Size of the Environment Sector */ -#endif - -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_CACHELINE_SIZE 32 -#if defined(CONFIG_CMD_KGDB) -# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - -/*----------------------------------------------------------------------- - * PCI stuff - *----------------------------------------------------------------------- - */ -#define CONFIG_PCI /* include pci support */ -#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ -#undef CONFIG_PCI_PNP - - -#define CONFIG_TULIP -#define CONFIG_TULIP_USE_IO - -#define CONFIG_SYS_ETH_DEV_FN 0x7800 -#define CONFIG_SYS_ETH_IOBASE 0x00104000 - -#define CONFIG_EEPRO100 -#define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ -#define PCI_ENET0_IOADDR 0x00104000 -#define PCI_ENET0_MEMADDR 0x80000000 -#endif /* __CONFIG_H */ diff --git a/include/configs/MUSENKI.h b/include/configs/MUSENKI.h deleted file mode 100644 index c5c929002d..0000000000 --- a/include/configs/MUSENKI.h +++ /dev/null @@ -1,275 +0,0 @@ -/* - * (C) Copyright 2001 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * - * Configuration settings for the MUSENKI board. - * - */ - -/* ------------------------------------------------------------------------- */ - -/* - * board/config.h - configuration options, board specific - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_MPC8245 1 -#define CONFIG_MUSENKI 1 - -#define CONFIG_SYS_TEXT_BASE 0xFFF00000 - -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 9600 - -#define CONFIG_BOOTDELAY 5 - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - - -/* - * Miscellaneous configurable options - */ -#undef CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ - -/* Print Buffer Size - */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 8 /* Max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_LOAD_ADDR 0x00100000 /* Default load address */ - -/*----------------------------------------------------------------------- - * PCI stuff - *----------------------------------------------------------------------- - */ -#define CONFIG_PCI /* include pci support */ -#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ -#undef CONFIG_PCI_PNP - - -#define CONFIG_TULIP - -#define PCI_ENET0_IOADDR 0x80000000 -#define PCI_ENET0_MEMADDR 0x80000000 -#define PCI_ENET1_IOADDR 0x81000000 -#define PCI_ENET1_MEMADDR 0x81000000 - - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 - -#define CONFIG_SYS_FLASH_BASE0_PRELIM 0xFF800000 /* FLASH bank on RCS#0 */ -#define CONFIG_SYS_FLASH_BASE1_PRELIM 0xFF000000 /* FLASH bank on RCS#1 */ -#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_FLASH_BASE0_PRELIM - -/* even though FLASHP_BASE is FF800000, with 4MB is RCS0, the - * reset vector is actually located at FFB00100, but the 8245 - * takes care of us. - */ -#define CONFIG_SYS_RESET_ADDRESS 0xFFF00100 - -#define CONFIG_SYS_EUMB_ADDR 0xFC000000 - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ - -#define CONFIG_SYS_MEMTEST_START 0x00004000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x02000000 /* 0 ... 32 MB in DRAM */ - - /* Maximum amount of RAM. - */ -#define CONFIG_SYS_MAX_RAM_SIZE 0x08000000 /* 0 .. 128 MB of (S)DRAM */ - - -#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE -#undef CONFIG_SYS_RAMBOOT -#else -#define CONFIG_SYS_RAMBOOT -#endif - -/* - * NS16550 Configuration - */ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL - -#define CONFIG_SYS_NS16550_REG_SIZE 1 - -#define CONFIG_SYS_NS16550_CLK get_bus_freq(0) - -#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_EUMB_ADDR + 0x4500) -#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_EUMB_ADDR + 0x4600) - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area - */ - -/* #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE */ -#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - - -/* - * Low Level Configuration Settings - * (address mappings, register initial values, etc.) - * You should know what you are doing if you make changes here. - * For the detail description refer to the MPC8240 user's manual. - */ - -#define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */ - - /* Bit-field values for MCCR1. - */ -#define CONFIG_SYS_ROMNAL 7 -#define CONFIG_SYS_ROMFAL 11 -#define CONFIG_SYS_DBUS_SIZE 0x3 - - /* Bit-field values for MCCR2. - */ -#define CONFIG_SYS_TSWAIT 0x5 /* Transaction Start Wait States timer */ -#define CONFIG_SYS_REFINT 0x400 /* Refresh interval FIXME: was 0t430 */ - - /* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4. - */ -#define CONFIG_SYS_BSTOPRE 121 - - /* Bit-field values for MCCR3. - */ -#define CONFIG_SYS_REFREC 8 /* Refresh to activate interval */ - - /* Bit-field values for MCCR4. - */ -#define CONFIG_SYS_PRETOACT 3 /* Precharge to activate interval FIXME: was 2 */ -#define CONFIG_SYS_ACTTOPRE 5 /* Activate to Precharge interval FIXME: was 5 */ -#define CONFIG_SYS_ACTORW 3 /* FIXME was 2 */ -#define CONFIG_SYS_SDMODE_CAS_LAT 3 /* SDMODE CAS latancy */ -#define CONFIG_SYS_SDMODE_WRAP 0 /* SDMODE wrap type */ -#define CONFIG_SYS_REGISTERD_TYPE_BUFFER 1 -#define CONFIG_SYS_EXTROM 1 -#define CONFIG_SYS_REGDIMM 0 - -#define CONFIG_SYS_PGMAX 0x32 /* how long the 8240 reatins the currently accessed page in memory FIXME: was 0x32*/ - -#define CONFIG_SYS_SDRAM_DSCD 0x20 /* SDRAM data in sample clock delay - note bottom 3 bits MUST be 0 */ - -/* Memory bank settings. - * Only bits 20-29 are actually used from these vales to set the - * start/end addresses. The upper two bits will always be 0, and the lower - * 20 bits will be 0x00000 for a start address, or 0xfffff for an end - * address. Refer to the MPC8240 book. - */ - -#define CONFIG_SYS_BANK0_START 0x00000000 -#define CONFIG_SYS_BANK0_END (CONFIG_SYS_MAX_RAM_SIZE - 1) -#define CONFIG_SYS_BANK0_ENABLE 1 -#define CONFIG_SYS_BANK1_START 0x3ff00000 -#define CONFIG_SYS_BANK1_END 0x3fffffff -#define CONFIG_SYS_BANK1_ENABLE 0 -#define CONFIG_SYS_BANK2_START 0x3ff00000 -#define CONFIG_SYS_BANK2_END 0x3fffffff -#define CONFIG_SYS_BANK2_ENABLE 0 -#define CONFIG_SYS_BANK3_START 0x3ff00000 -#define CONFIG_SYS_BANK3_END 0x3fffffff -#define CONFIG_SYS_BANK3_ENABLE 0 -#define CONFIG_SYS_BANK4_START 0x3ff00000 -#define CONFIG_SYS_BANK4_END 0x3fffffff -#define CONFIG_SYS_BANK4_ENABLE 0 -#define CONFIG_SYS_BANK5_START 0x3ff00000 -#define CONFIG_SYS_BANK5_END 0x3fffffff -#define CONFIG_SYS_BANK5_ENABLE 0 -#define CONFIG_SYS_BANK6_START 0x3ff00000 -#define CONFIG_SYS_BANK6_END 0x3fffffff -#define CONFIG_SYS_BANK6_ENABLE 0 -#define CONFIG_SYS_BANK7_START 0x3ff00000 -#define CONFIG_SYS_BANK7_END 0x3fffffff -#define CONFIG_SYS_BANK7_ENABLE 0 - -#define CONFIG_SYS_ODCR 0xff - -#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) - -#define CONFIG_SYS_IBAT1L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT1U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP) - -#define CONFIG_SYS_IBAT2L (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT) -#define CONFIG_SYS_IBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP) - -#define CONFIG_SYS_IBAT3L (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT) -#define CONFIG_SYS_IBAT3U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP) - -#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L -#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U -#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L -#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U -#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L -#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U -#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L -#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/*----------------------------------------------------------------------- - * FLASH organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* Max number of flash banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 64 /* Max number of sectors per flash */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ - - - /* Warining: environment is not EMBEDDED in the U-Boot code. - * It's stored in flash separately. - */ -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_ADDR 0xFFFF0000 -#define CONFIG_ENV_SIZE 0x00010000 /* Size of the Environment */ -#define CONFIG_ENV_SECT_SIZE 0x20000 /* Size of the Environment Sector */ - -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_CACHELINE_SIZE 32 -#if defined(CONFIG_CMD_KGDB) -# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - -#endif /* __CONFIG_H */ diff --git a/include/configs/MVBLUE.h b/include/configs/MVBLUE.h deleted file mode 100644 index aa2d9c02de..0000000000 --- a/include/configs/MVBLUE.h +++ /dev/null @@ -1,325 +0,0 @@ -/* - * (C) Copyright 2001 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - - -#ifndef __CONFIG_H -#define __CONFIG_H - -#define MV_VERSION "v0.2.0" - -/* LED0 = Power , LED1 = Error , LED2-5 = error code, LED6-7=00 -->PPCBoot error */ -#define ERR_NONE 0 -#define ERR_ENV 1 -#define ERR_BOOTM_BADMAGIC 2 -#define ERR_BOOTM_BADCRC 3 -#define ERR_BOOTM_GUNZIP 4 -#define ERR_BOOTP_TIMEOUT 5 -#define ERR_DHCP 6 -#define ERR_TFTP 7 -#define ERR_NOLAN 8 -#define ERR_LANDRV 9 - -#define CONFIG_BOARD_TYPES 1 -#define MVBLUE_BOARD_BOX 1 -#define MVBLUE_BOARD_LYNX 2 - -#define CONFIG_SYS_TEXT_BASE 0xFFF00000 -#define CONFIG_SYS_LDSCRIPT "board/mvblue/u-boot.lds" - -#if 0 -#define ERR_LED(code) do { if (code) \ - *(volatile char *)(0xff000003) = ( 3 | (code<<4) ) & 0xf3; \ - else \ - *(volatile char *)(0xff000003) = ( 1 ); \ -} while(0) -#else -#define ERR_LED(code) -#endif - -#define CONFIG_MPC8245 1 -#define CONFIG_MVBLUE 1 - -#define CONFIG_CLOCKS_IN_MHZ 1 - -#define CONFIG_BOARD_TYPES 1 - -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 115200 - -#define CONFIG_BOOTDELAY 3 -#define CONFIG_BOOT_RETRY_TIME -1 - -#define CONFIG_AUTOBOOT_KEYED -#define CONFIG_AUTOBOOT_PROMPT \ - "autoboot in %d seconds (stop with 's')...\n", bootdelay -#define CONFIG_AUTOBOOT_STOP_STR "s" -#define CONFIG_ZERO_BOOTDELAY_CHECK -#define CONFIG_RESET_TO_RETRY 60 - - -/* - * Command line configuration. - */ - -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_BOOTD -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_ECHO -#define CONFIG_CMD_SAVEENV -#define CONFIG_CMD_FLASH -#define CONFIG_CMD_IMI -#define CONFIG_CMD_NET -#define CONFIG_CMD_PCI -#define CONFIG_CMD_RUN - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_BOOTP_NISDOMAIN -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_DNS -#define CONFIG_BOOTP_DNS2 -#define CONFIG_BOOTP_SEND_HOSTNAME -#define CONFIG_BOOTP_NTPSERVER -#define CONFIG_BOOTP_TIMEOFFSET - - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ - -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 16 /* Max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_LOAD_ADDR 0x00100000 /* Default load address */ - -#define CONFIG_BOOTCOMMAND "run nfsboot" -#define CONFIG_BOOTARGS "root=/dev/mtdblock5 ro rootfstype=jffs2" - -#define CONFIG_NFSBOOTCOMMAND "bootp; run nfsargs addcons;bootm" - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "console_nr=0\0" \ - "dhcp_client_id=mvBOX-XP\0" \ - "dhcp_vendor-class-identifier=mvBOX\0" \ - "adminboot=setenv bootargs root=/dev/mtdblock5 rw rootfstype=jffs2;run addcons;bootm ffc00000\0" \ - "flashboot=setenv bootargs root=/dev/mtdblock5 ro rootfstype=jffs2;run addcons;bootm ffc00000\0" \ - "safeboot=setenv bootargs root=/dev/mtdblock2 rw rootfstype=cramfs;run addcons;bootm ffc00000\0" \ - "hdboot=setenv bootargs root=/dev/hda1;run addcons;bootm ffc00000\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off\0" \ - "addcons=setenv bootargs ${bootargs} console=ttyS${console_nr},${baudrate}N8\0" \ - "mv_version=" MV_VERSION "\0" \ - "bootretry=30\0" - -#define CONFIG_OVERWRITE_ETHADDR_ONCE - -/*----------------------------------------------------------------------- - * PCI stuff - *----------------------------------------------------------------------- - */ - -#define CONFIG_PCI -#define CONFIG_PCI_INDIRECT_BRIDGE -#define CONFIG_PCI_PNP -#define CONFIG_PCI_SCAN_SHOW - -#define CONFIG_NET_RETRY_COUNT 5 - -#define CONFIG_TULIP -#define CONFIG_TULIP_FIX_DAVICOM 1 -#define CONFIG_ETHADDR b6:b4:45:eb:fb:c0 - -#define CONFIG_HW_WATCHDOG - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 - -#define CONFIG_SYS_FLASH_BASE 0xFFF00000 -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE - -#define CONFIG_SYS_RESET_ADDRESS 0xFFF00100 -#define CONFIG_SYS_EUMB_ADDR 0xFC000000 - -#define CONFIG_SYS_MONITOR_LEN 0x00100000 -#define CONFIG_SYS_MALLOC_LEN (512 << 10) /* Reserve some kB for malloc() */ - -#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x00800000 /* 1M ... 8M in DRAM */ - -/* Maximum amount of RAM. */ -#define CONFIG_SYS_MAX_RAM_SIZE 0x10000000 /* 0 .. 256MB of (S)DRAM */ - - -#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE -#undef CONFIG_SYS_RAMBOOT -#else -#define CONFIG_SYS_RAMBOOT -#endif - -#define CONFIG_SYS_ISA_IO 0xFE000000 - -/* - * serial configuration - */ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL - -#define CONFIG_SYS_NS16550_REG_SIZE 1 - -#define CONFIG_SYS_NS16550_CLK get_bus_freq(0) - -#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_EUMB_ADDR + 0x4500) -#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_EUMB_ADDR + 0x4600) - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area - */ -#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - -/* - * Low Level Configuration Settings - * (address mappings, register initial values, etc.) - * You should know what you are doing if you make changes here. - * For the detail description refer to the MPC8240 user's manual. - */ - -#define CONFIG_SYS_CLK_FREQ 33000000 - -/* Bit-field values for MCCR1. */ -#define CONFIG_SYS_ROMNAL 7 -#define CONFIG_SYS_ROMFAL 11 - -/* Bit-field values for MCCR2. */ -#define CONFIG_SYS_TSWAIT 0x5 -#define CONFIG_SYS_REFINT 430 - -/* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4. */ -#define CONFIG_SYS_BSTOPRE 121 - -/* Bit-field values for MCCR3. */ -#define CONFIG_SYS_REFREC 8 - -/* Bit-field values for MCCR4. */ -#define CONFIG_SYS_PRETOACT 3 -#define CONFIG_SYS_ACTTOPRE 5 -#define CONFIG_SYS_ACTORW 3 -#define CONFIG_SYS_SDMODE_CAS_LAT 3 -#define CONFIG_SYS_REGISTERD_TYPE_BUFFER 1 -#define CONFIG_SYS_EXTROM 1 -#define CONFIG_SYS_REGDIMM 0 -#define CONFIG_SYS_DBUS_SIZE2 1 -#define CONFIG_SYS_SDMODE_WRAP 0 - -#define CONFIG_SYS_PGMAX 0x32 -#define CONFIG_SYS_SDRAM_DSCD 0x20 - -/* Memory bank settings. - * Only bits 20-29 are actually used from these vales to set the - * start/end addresses. The upper two bits will always be 0, and the lower - * 20 bits will be 0x00000 for a start address, or 0xfffff for an end - * address. Refer to the MPC8240 book. - */ - -#define CONFIG_SYS_BANK0_START 0x00000000 -#define CONFIG_SYS_BANK0_END (CONFIG_SYS_MAX_RAM_SIZE - 1) -#define CONFIG_SYS_BANK0_ENABLE 1 -#define CONFIG_SYS_BANK1_START 0x3ff00000 -#define CONFIG_SYS_BANK1_END 0x3fffffff -#define CONFIG_SYS_BANK1_ENABLE 0 -#define CONFIG_SYS_BANK2_START 0x3ff00000 -#define CONFIG_SYS_BANK2_END 0x3fffffff -#define CONFIG_SYS_BANK2_ENABLE 0 -#define CONFIG_SYS_BANK3_START 0x3ff00000 -#define CONFIG_SYS_BANK3_END 0x3fffffff -#define CONFIG_SYS_BANK3_ENABLE 0 -#define CONFIG_SYS_BANK4_START 0x3ff00000 -#define CONFIG_SYS_BANK4_END 0x3fffffff -#define CONFIG_SYS_BANK4_ENABLE 0 -#define CONFIG_SYS_BANK5_START 0x3ff00000 -#define CONFIG_SYS_BANK5_END 0x3fffffff -#define CONFIG_SYS_BANK5_ENABLE 0 -#define CONFIG_SYS_BANK6_START 0x3ff00000 -#define CONFIG_SYS_BANK6_END 0x3fffffff -#define CONFIG_SYS_BANK6_ENABLE 0 -#define CONFIG_SYS_BANK7_START 0x3ff00000 -#define CONFIG_SYS_BANK7_END 0x3fffffff -#define CONFIG_SYS_BANK7_ENABLE 0 - -#define CONFIG_SYS_ODCR 0xff - -#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) - -#define CONFIG_SYS_IBAT1L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT1U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP) - -#define CONFIG_SYS_IBAT2L (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT) -#define CONFIG_SYS_IBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP) - -#define CONFIG_SYS_IBAT3L (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT) -#define CONFIG_SYS_IBAT3U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP) - -#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L -#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U -#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L -#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U -#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L -#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U -#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L -#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/*----------------------------------------------------------------------- - * FLASH organization - */ -#undef CONFIG_SYS_FLASH_PROTECTION -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* Max number of flash banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 63 /* Max number of sectors per flash */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 12000 -#define CONFIG_SYS_FLASH_WRITE_TOUT 1000 - - -#define CONFIG_ENV_IS_IN_FLASH - -#define CONFIG_ENV_OFFSET 0x00010000 -#define CONFIG_ENV_SIZE 0x00010000 -#define CONFIG_ENV_SECT_SIZE 0x00010000 - -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_CACHELINE_SIZE 32 -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif -#endif /* __CONFIG_H */ diff --git a/include/configs/Sandpoint8240.h b/include/configs/Sandpoint8240.h deleted file mode 100644 index 2c0cb89afa..0000000000 --- a/include/configs/Sandpoint8240.h +++ /dev/null @@ -1,398 +0,0 @@ -/* - * (C) Copyright 2001-2005 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* ------------------------------------------------------------------------- */ - -/* - * board/config.h - configuration options, board specific - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_MPC8240 1 -#define CONFIG_SANDPOINT 1 - -#define CONFIG_SYS_TEXT_BASE 0xFFF00000 -#define CONFIG_SYS_LDSCRIPT "board/sandpoint/u-boot.lds" - -#if 0 -#define USE_DINK32 1 -#else -#undef USE_DINK32 -#endif - -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 9600 - -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ - -#define CONFIG_TIMESTAMP /* Print image info with timestamp */ - -#define CONFIG_PREBOOT "echo;" \ - "echo Type \"run net_nfs\" to mount root filesystem over NFS;" \ - "echo" - -#undef CONFIG_BOOTARGS - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${rootpath}\0" \ - "ramargs=setenv bootargs root=/dev/ram rw\0" \ - "addip=setenv bootargs ${bootargs} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ - ":${hostname}:${netdev}:off panic=1\0" \ - "net_self=tftp ${kernel_addr} ${bootfile};" \ - "tftp ${ramdisk_addr} ${ramdisk};" \ - "run ramargs addip;" \ - "bootm ${kernel_addr} ${ramdisk_addr}\0" \ - "net_nfs=tftp ${kernel_addr} ${bootfile};" \ - "run nfsargs addip;bootm\0" \ - "rootpath=/opt/eldk/ppc_82xx\0" \ - "bootfile=/tftpboot/SP8240/uImage\0" \ - "ramdisk=/tftpboot/SP8240/uRamdisk\0" \ - "kernel_addr=200000\0" \ - "ramdisk_addr=400000\0" \ - "" -#define CONFIG_BOOTCOMMAND "run flash_self" - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_ELF -#define CONFIG_CMD_I2C -#define CONFIG_CMD_SDRAM -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_NFS -#define CONFIG_CMD_PCI -#define CONFIG_CMD_SNTP - - -#define CONFIG_DRAM_SPEED 100 /* MHz */ - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP 1 /* undef to save memory */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_LOAD_ADDR 0x00100000 /* default load address */ - -/*----------------------------------------------------------------------- - * PCI stuff - *----------------------------------------------------------------------- - */ -#define CONFIG_PCI /* include pci support */ -#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ -#undef CONFIG_PCI_PNP - - -#define CONFIG_EEPRO100 -#define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ - -#define PCI_ENET0_IOADDR 0x80000000 -#define PCI_ENET0_MEMADDR 0x80000000 -#define PCI_ENET1_IOADDR 0x81000000 -#define PCI_ENET1_MEMADDR 0x81000000 - - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_MAX_RAM_SIZE 0x10000000 - -#define CONFIG_SYS_RESET_ADDRESS 0xFFF00100 - -#if defined (USE_DINK32) -#define CONFIG_SYS_MONITOR_LEN 0x00030000 -#define CONFIG_SYS_MONITOR_BASE 0x00090000 -#define CONFIG_SYS_RAMBOOT 1 -#define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) -#define CONFIG_SYS_INIT_RAM_SIZE 0x10000 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET -#else -#undef CONFIG_SYS_RAMBOOT -#define CONFIG_SYS_MONITOR_LEN 0x00030000 -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE - - -#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - -#endif - -#define CONFIG_SYS_FLASH_BASE 0xFFF00000 -#if 0 -#define CONFIG_SYS_FLASH_SIZE (512 * 1024) /* sandpoint has tiny eeprom */ -#else -#define CONFIG_SYS_FLASH_SIZE (1024 * 1024) /* Unity has onboard 1MByte flash */ -#endif -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_OFFSET 0x00004000 /* Offset of Environment Sector */ -#define CONFIG_ENV_SIZE 0x00002000 /* Total Size of Environment Sector */ - -#define CONFIG_SYS_MALLOC_LEN (512 << 10) /* Reserve 512 kB for malloc() */ - -#define CONFIG_SYS_MEMTEST_START 0x00000000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x04000000 /* 0 ... 32 MB in DRAM */ - -#define CONFIG_SYS_EUMB_ADDR 0xFC000000 - -#define CONFIG_SYS_ISA_MEM 0xFD000000 -#define CONFIG_SYS_ISA_IO 0xFE000000 - -#define CONFIG_SYS_FLASH_RANGE_BASE 0xFF000000 /* flash memory address range */ -#define CONFIG_SYS_FLASH_RANGE_SIZE 0x01000000 -#define FLASH_BASE0_PRELIM 0xFFF00000 /* sandpoint flash */ -#define FLASH_BASE1_PRELIM 0xFF000000 /* PMC onboard flash */ - -/* - * select i2c support configuration - * - * Supported configurations are {none, software, hardware} drivers. - * If the software driver is chosen, there are some additional - * configuration items that the driver uses to drive the port pins. - */ -#define CONFIG_HARD_I2C 1 /* To enable I2C support */ -#undef CONFIG_SYS_I2C_SOFT -#define CONFIG_SYS_I2C_SLAVE 0x7F -#define CONFIG_SYS_I2C_SPEED 400000 - -#ifdef CONFIG_SYS_I2C_SOFT -#error "Soft I2C is not configured properly. Please review!" -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_SOFT_SPEED 50000 -#define CONFIG_SYS_I2C_SOFT_SLAVE 0xFE -#define I2C_PORT 3 /* Port A=0, B=1, C=2, D=3 */ -#define I2C_ACTIVE (iop->pdir |= 0x00010000) -#define I2C_TRISTATE (iop->pdir &= ~0x00010000) -#define I2C_READ ((iop->pdat & 0x00010000) != 0) -#define I2C_SDA(bit) if(bit) iop->pdat |= 0x00010000; \ - else iop->pdat &= ~0x00010000 -#define I2C_SCL(bit) if(bit) iop->pdat |= 0x00020000; \ - else iop->pdat &= ~0x00020000 -#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */ -#endif /* CONFIG_SYS_I2C_SOFT */ - - -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 /* EEPROM IS24C02 */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */ -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 /* write page size */ -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* takes up to 10 msec */ - - -#define CONFIG_SYS_FLASH_BANKS { FLASH_BASE0_PRELIM , FLASH_BASE1_PRELIM } - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area (in DPRAM) - */ - - -/* #define CONFIG_WINBOND_83C553 1 / *has a winbond bridge */ -#define CONFIG_SYS_USE_WINBOND_IDE 0 /*use winbond 83c553 internal IDE ctrlr */ -#define CONFIG_SYS_WINBOND_ISA_CFG_ADDR 0x80005800 /*pci-isa bridge config addr */ -#define CONFIG_SYS_WINBOND_IDE_CFG_ADDR 0x80005900 /*ide config addr */ - -#define CONFIG_SYS_IDE_MAXBUS 2 /* max. 2 IDE busses */ -#define CONFIG_SYS_IDE_MAXDEVICE (CONFIG_SYS_IDE_MAXBUS*2) /* max. 2 drives per IDE bus */ - -/* - * NS87308 Configuration - */ -#define CONFIG_NS87308 /* Nat Semi super-io controller on ISA bus */ - -#define CONFIG_SYS_NS87308_BADDR_10 1 - -#define CONFIG_SYS_NS87308_DEVS ( CONFIG_SYS_NS87308_UART1 | \ - CONFIG_SYS_NS87308_UART2 | \ - CONFIG_SYS_NS87308_POWRMAN | \ - CONFIG_SYS_NS87308_RTC_APC ) - -#undef CONFIG_SYS_NS87308_PS2MOD - -#define CONFIG_SYS_NS87308_CS0_BASE 0x0076 -#define CONFIG_SYS_NS87308_CS0_CONF 0x30 -#define CONFIG_SYS_NS87308_CS1_BASE 0x0075 -#define CONFIG_SYS_NS87308_CS1_CONF 0x30 -#define CONFIG_SYS_NS87308_CS2_BASE 0x0074 -#define CONFIG_SYS_NS87308_CS2_CONF 0x30 - -/* - * NS16550 Configuration - */ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL - -#define CONFIG_SYS_NS16550_REG_SIZE 1 - -#define CONFIG_SYS_NS16550_CLK 1843200 - -#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_ISA_IO + CONFIG_SYS_NS87308_UART1_BASE) -#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_ISA_IO + CONFIG_SYS_NS87308_UART2_BASE) - -/* - * Low Level Configuration Settings - * (address mappings, register initial values, etc.) - * You should know what you are doing if you make changes here. - */ - -#define CONFIG_SYS_CLK_FREQ 33000000 /* external frequency to pll */ -#define CONFIG_PLL_PCI_TO_MEM_MULTIPLIER 1 - -#define CONFIG_SYS_ROMNAL 7 /*rom/flash next access time */ -#define CONFIG_SYS_ROMFAL 11 /*rom/flash access time */ - -#define CONFIG_SYS_REFINT 430 /* no of clock cycles between CBR refresh cycles */ - -/* the following are for SDRAM only*/ -#define CONFIG_SYS_BSTOPRE 121 /* Burst To Precharge, sets open page interval */ -#define CONFIG_SYS_REFREC 8 /* Refresh to activate interval */ -#define CONFIG_SYS_RDLAT 4 /* data latency from read command */ -#define CONFIG_SYS_PRETOACT 3 /* Precharge to activate interval */ -#define CONFIG_SYS_ACTTOPRE 5 /* Activate to Precharge interval */ -#define CONFIG_SYS_ACTORW 3 /* Activate to R/W */ -#define CONFIG_SYS_SDMODE_CAS_LAT 3 /* SDMODE CAS latency */ -#define CONFIG_SYS_SDMODE_WRAP 0 /* SDMODE wrap type */ -#define CONFIG_SYS_SDMODE_BURSTLEN 2 /* SDMODE Burst length 2=4, 3=8 */ - -#define CONFIG_SYS_REGISTERD_TYPE_BUFFER 1 - -/* memory bank settings*/ -/* - * only bits 20-29 are actually used from these vales to set the - * start/end address the upper two bits will be 0, and the lower 20 - * bits will be set to 0x00000 for a start address, or 0xfffff for an - * end address - */ -#define CONFIG_SYS_BANK0_START 0x00000000 -#define CONFIG_SYS_BANK0_END (CONFIG_SYS_MAX_RAM_SIZE - 1) -#define CONFIG_SYS_BANK0_ENABLE 1 -#define CONFIG_SYS_BANK1_START 0x3ff00000 -#define CONFIG_SYS_BANK1_END 0x3fffffff -#define CONFIG_SYS_BANK1_ENABLE 0 -#define CONFIG_SYS_BANK2_START 0x3ff00000 -#define CONFIG_SYS_BANK2_END 0x3fffffff -#define CONFIG_SYS_BANK2_ENABLE 0 -#define CONFIG_SYS_BANK3_START 0x3ff00000 -#define CONFIG_SYS_BANK3_END 0x3fffffff -#define CONFIG_SYS_BANK3_ENABLE 0 -#define CONFIG_SYS_BANK4_START 0x00000000 -#define CONFIG_SYS_BANK4_END 0x00000000 -#define CONFIG_SYS_BANK4_ENABLE 0 -#define CONFIG_SYS_BANK5_START 0x00000000 -#define CONFIG_SYS_BANK5_END 0x00000000 -#define CONFIG_SYS_BANK5_ENABLE 0 -#define CONFIG_SYS_BANK6_START 0x00000000 -#define CONFIG_SYS_BANK6_END 0x00000000 -#define CONFIG_SYS_BANK6_ENABLE 0 -#define CONFIG_SYS_BANK7_START 0x00000000 -#define CONFIG_SYS_BANK7_END 0x00000000 -#define CONFIG_SYS_BANK7_ENABLE 0 -/* - * Memory bank enable bitmask, specifying which of the banks defined above - are actually present. MSB is for bank #7, LSB is for bank #0. - */ -#define CONFIG_SYS_BANK_ENABLE 0x01 - -#define CONFIG_SYS_ODCR 0xff /* configures line driver impedances, */ - /* see 8240 book for bit definitions */ -#define CONFIG_SYS_PGMAX 0x32 /* how long the 8240 retains the */ - /* currently accessed page in memory */ - /* see 8240 book for details */ - -/* SDRAM 0 - 256MB */ -#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) - -/* stack in DCACHE @ 1GB (no backing mem) */ -#if defined(USE_DINK32) -#define CONFIG_SYS_IBAT1L (0x40000000 | BATL_PP_00 ) -#define CONFIG_SYS_IBAT1U (0x40000000 | BATU_BL_128K ) -#else -#define CONFIG_SYS_IBAT1L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT1U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP) -#endif - -/* PCI memory */ -#define CONFIG_SYS_IBAT2L (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT) -#define CONFIG_SYS_IBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP) - -/* Flash, config addrs, etc */ -#define CONFIG_SYS_IBAT3L (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT) -#define CONFIG_SYS_IBAT3U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP) - -#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L -#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U -#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L -#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U -#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L -#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U -#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L -#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ -/*----------------------------------------------------------------------- - * FLASH organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 20 /* max number of sectors on one chip */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ - -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC8240 CPU */ -#if defined(CONFIG_CMD_KGDB) -# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - -/* values according to the manual */ - -#define CONFIG_DRAM_50MHZ 1 -#define CONFIG_SDRAM_50MHZ - -#undef NR_8259_INTS -#define NR_8259_INTS 1 - - -#define CONFIG_DISK_SPINUP_TIME 1000000 - - -#endif /* __CONFIG_H */ diff --git a/include/configs/Sandpoint8245.h b/include/configs/Sandpoint8245.h deleted file mode 100644 index 2664d5b169..0000000000 --- a/include/configs/Sandpoint8245.h +++ /dev/null @@ -1,376 +0,0 @@ -/* - * (C) Copyright 2001-2005 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* ------------------------------------------------------------------------- */ - -/* - * board/config.h - configuration options, board specific - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_MPC8245 1 -#define CONFIG_SANDPOINT 1 - -#define CONFIG_SYS_TEXT_BASE 0xFFF00000 -#define CONFIG_SYS_LDSCRIPT "board/sandpoint/u-boot.lds" - -#if 0 -#define USE_DINK32 1 -#else -#undef USE_DINK32 -#endif - -#define CONFIG_CONS_INDEX 3 /* set to '3' for on-chip DUART */ -#define CONFIG_BAUDRATE 9600 -#define CONFIG_DRAM_SPEED 100 /* MHz */ - -#define CONFIG_TIMESTAMP /* Print image info with timestamp */ - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_ELF -#define CONFIG_CMD_I2C -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_NFS -#define CONFIG_CMD_PCI -#define CONFIG_CMD_SNTP - - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP 1 /* undef to save memory */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_LOAD_ADDR 0x00100000 /* default load address */ - -/*----------------------------------------------------------------------- - * PCI stuff - *----------------------------------------------------------------------- - */ -#define CONFIG_PCI /* include pci support */ -#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ -#undef CONFIG_PCI_PNP - - -#define CONFIG_EEPRO100 -#define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ -#define CONFIG_NATSEMI -#define CONFIG_NS8382X - -#define PCI_ENET0_IOADDR 0x80000000 -#define PCI_ENET0_MEMADDR 0x80000000 -#define PCI_ENET1_IOADDR 0x81000000 -#define PCI_ENET1_MEMADDR 0x81000000 - - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_MAX_RAM_SIZE 0x10000000 - -#define CONFIG_SYS_RESET_ADDRESS 0xFFF00100 - -#if defined (USE_DINK32) -#define CONFIG_SYS_MONITOR_LEN 0x00030000 -#define CONFIG_SYS_MONITOR_BASE 0x00090000 -#define CONFIG_SYS_RAMBOOT 1 -#define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) -#define CONFIG_SYS_INIT_RAM_SIZE 0x10000 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET -#else -#undef CONFIG_SYS_RAMBOOT -#define CONFIG_SYS_MONITOR_LEN 0x00030000 -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE - - -#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - -#endif - -#define CONFIG_SYS_FLASH_BASE 0xFFF00000 -#if 0 -#define CONFIG_SYS_FLASH_SIZE (512 * 1024) /* sandpoint has tiny eeprom */ -#else -#define CONFIG_SYS_FLASH_SIZE (1024 * 1024) /* Unity has onboard 1MByte flash */ -#endif -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_OFFSET 0x00004000 /* Offset of Environment Sector */ -#define CONFIG_ENV_SIZE 0x00002000 /* Total Size of Environment Sector */ - -#define CONFIG_SYS_MALLOC_LEN (512 << 10) /* Reserve 512 kB for malloc() */ - -#define CONFIG_SYS_MEMTEST_START 0x00000000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x04000000 /* 0 ... 32 MB in DRAM */ - -#define CONFIG_SYS_EUMB_ADDR 0xFC000000 - -#define CONFIG_SYS_ISA_MEM 0xFD000000 -#define CONFIG_SYS_ISA_IO 0xFE000000 - -#define CONFIG_SYS_FLASH_RANGE_BASE 0xFF000000 /* flash memory address range */ -#define CONFIG_SYS_FLASH_RANGE_SIZE 0x01000000 -#define FLASH_BASE0_PRELIM 0xFFF00000 /* sandpoint flash */ -#define FLASH_BASE1_PRELIM 0xFF000000 /* PMC onboard flash */ - -/* - * select i2c support configuration - * - * Supported configurations are {none, software, hardware} drivers. - * If the software driver is chosen, there are some additional - * configuration items that the driver uses to drive the port pins. - */ -#define CONFIG_HARD_I2C 1 /* To enable I2C support */ -#undef CONFIG_SYS_I2C_SOFT -#define CONFIG_SYS_I2C_SPEED 400000 -#define CONFIG_SYS_I2C_SLAVE 0x7F - -#ifdef CONFIG_SYS_I2C_SOFT -#error "Soft I2C is not configured properly. Please review!" -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_SOFT_SPEED 50000 -#define CONFIG_SYS_I2C_SOFT_SLAVE 0xFE -#define I2C_PORT 3 /* Port A=0, B=1, C=2, D=3 */ -#define I2C_ACTIVE (iop->pdir |= 0x00010000) -#define I2C_TRISTATE (iop->pdir &= ~0x00010000) -#define I2C_READ ((iop->pdat & 0x00010000) != 0) -#define I2C_SDA(bit) if(bit) iop->pdat |= 0x00010000; \ - else iop->pdat &= ~0x00010000 -#define I2C_SCL(bit) if(bit) iop->pdat |= 0x00020000; \ - else iop->pdat &= ~0x00020000 -#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */ -#endif /* CONFIG_SYS_I2C_SOFT */ - -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 /* EEPROM IS24C02 */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */ -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */ - -#define CONFIG_SYS_FLASH_BANKS { FLASH_BASE0_PRELIM , FLASH_BASE1_PRELIM } - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area (in DPRAM) - */ - - -/* #define CONFIG_WINBOND_83C553 1 / *has a winbond bridge */ -#define CONFIG_SYS_USE_WINBOND_IDE 0 /*use winbond 83c553 internal IDE ctrlr */ -#define CONFIG_SYS_WINBOND_ISA_CFG_ADDR 0x80005800 /*pci-isa bridge config addr */ -#define CONFIG_SYS_WINBOND_IDE_CFG_ADDR 0x80005900 /*ide config addr */ - -#define CONFIG_SYS_IDE_MAXBUS 2 /* max. 2 IDE busses */ -#define CONFIG_SYS_IDE_MAXDEVICE (CONFIG_SYS_IDE_MAXBUS*2) /* max. 2 drives per IDE bus */ - -/* - * NS87308 Configuration - */ -#define CONFIG_NS87308 /* Nat Semi super-io controller on ISA bus */ - -#define CONFIG_SYS_NS87308_BADDR_10 1 - -#define CONFIG_SYS_NS87308_DEVS ( CONFIG_SYS_NS87308_UART1 | \ - CONFIG_SYS_NS87308_UART2 | \ - CONFIG_SYS_NS87308_POWRMAN | \ - CONFIG_SYS_NS87308_RTC_APC ) - -#undef CONFIG_SYS_NS87308_PS2MOD - -#define CONFIG_SYS_NS87308_CS0_BASE 0x0076 -#define CONFIG_SYS_NS87308_CS0_CONF 0x30 -#define CONFIG_SYS_NS87308_CS1_BASE 0x0075 -#define CONFIG_SYS_NS87308_CS1_CONF 0x30 -#define CONFIG_SYS_NS87308_CS2_BASE 0x0074 -#define CONFIG_SYS_NS87308_CS2_CONF 0x30 - -/* - * NS16550 Configuration - */ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL - -#define CONFIG_SYS_NS16550_REG_SIZE 1 - -#if (CONFIG_CONS_INDEX > 2) -#define CONFIG_SYS_NS16550_CLK CONFIG_DRAM_SPEED*1000000 -#else -#define CONFIG_SYS_NS16550_CLK 1843200 -#endif - -#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_ISA_IO + CONFIG_SYS_NS87308_UART1_BASE) -#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_ISA_IO + CONFIG_SYS_NS87308_UART2_BASE) -#define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_EUMB_ADDR + 0x4500) -#define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_EUMB_ADDR + 0x4600) - -/* - * Low Level Configuration Settings - * (address mappings, register initial values, etc.) - * You should know what you are doing if you make changes here. - */ - -#define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */ - -#define CONFIG_SYS_ROMNAL 7 /*rom/flash next access time */ -#define CONFIG_SYS_ROMFAL 11 /*rom/flash access time */ - -#define CONFIG_SYS_REFINT 430 /* no of clock cycles between CBR refresh cycles */ - -/* the following are for SDRAM only*/ -#define CONFIG_SYS_BSTOPRE 121 /* Burst To Precharge, sets open page interval */ -#define CONFIG_SYS_REFREC 8 /* Refresh to activate interval */ -#define CONFIG_SYS_RDLAT 4 /* data latency from read command */ -#define CONFIG_SYS_PRETOACT 3 /* Precharge to activate interval */ -#define CONFIG_SYS_ACTTOPRE 5 /* Activate to Precharge interval */ -#define CONFIG_SYS_ACTORW 3 /* Activate to R/W */ -#define CONFIG_SYS_SDMODE_CAS_LAT 3 /* SDMODE CAS latency */ -#define CONFIG_SYS_SDMODE_WRAP 0 /* SDMODE wrap type */ -#if 0 -#define CONFIG_SYS_SDMODE_BURSTLEN 2 /* OBSOLETE! SDMODE Burst length 2=4, 3=8 */ -#endif - -#define CONFIG_SYS_REGISTERD_TYPE_BUFFER 1 -#define CONFIG_SYS_EXTROM 1 -#define CONFIG_SYS_REGDIMM 0 - - -/* memory bank settings*/ -/* - * only bits 20-29 are actually used from these vales to set the - * start/end address the upper two bits will be 0, and the lower 20 - * bits will be set to 0x00000 for a start address, or 0xfffff for an - * end address - */ -#define CONFIG_SYS_BANK0_START 0x00000000 -#define CONFIG_SYS_BANK0_END (CONFIG_SYS_MAX_RAM_SIZE - 1) -#define CONFIG_SYS_BANK0_ENABLE 1 -#define CONFIG_SYS_BANK1_START 0x3ff00000 -#define CONFIG_SYS_BANK1_END 0x3fffffff -#define CONFIG_SYS_BANK1_ENABLE 0 -#define CONFIG_SYS_BANK2_START 0x3ff00000 -#define CONFIG_SYS_BANK2_END 0x3fffffff -#define CONFIG_SYS_BANK2_ENABLE 0 -#define CONFIG_SYS_BANK3_START 0x3ff00000 -#define CONFIG_SYS_BANK3_END 0x3fffffff -#define CONFIG_SYS_BANK3_ENABLE 0 -#define CONFIG_SYS_BANK4_START 0x00000000 -#define CONFIG_SYS_BANK4_END 0x00000000 -#define CONFIG_SYS_BANK4_ENABLE 0 -#define CONFIG_SYS_BANK5_START 0x00000000 -#define CONFIG_SYS_BANK5_END 0x00000000 -#define CONFIG_SYS_BANK5_ENABLE 0 -#define CONFIG_SYS_BANK6_START 0x00000000 -#define CONFIG_SYS_BANK6_END 0x00000000 -#define CONFIG_SYS_BANK6_ENABLE 0 -#define CONFIG_SYS_BANK7_START 0x00000000 -#define CONFIG_SYS_BANK7_END 0x00000000 -#define CONFIG_SYS_BANK7_ENABLE 0 -/* - * Memory bank enable bitmask, specifying which of the banks defined above - are actually present. MSB is for bank #7, LSB is for bank #0. - */ -#define CONFIG_SYS_BANK_ENABLE 0x01 - -#define CONFIG_SYS_ODCR 0xff /* configures line driver impedances, */ - /* see 8240 book for bit definitions */ -#define CONFIG_SYS_PGMAX 0x32 /* how long the 8240 retains the */ - /* currently accessed page in memory */ - /* see 8240 book for details */ - -/* SDRAM 0 - 256MB */ -#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) - -/* stack in DCACHE @ 1GB (no backing mem) */ -#if defined(USE_DINK32) -#define CONFIG_SYS_IBAT1L (0x40000000 | BATL_PP_00 ) -#define CONFIG_SYS_IBAT1U (0x40000000 | BATU_BL_128K ) -#else -#define CONFIG_SYS_IBAT1L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT1U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP) -#endif - -/* PCI memory */ -#define CONFIG_SYS_IBAT2L (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT) -#define CONFIG_SYS_IBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP) - -/* Flash, config addrs, etc */ -#define CONFIG_SYS_IBAT3L (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT) -#define CONFIG_SYS_IBAT3U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP) - -#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L -#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U -#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L -#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U -#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L -#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U -#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L -#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ -/*----------------------------------------------------------------------- - * FLASH organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 20 /* max number of sectors on one chip */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ - -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC8240 CPU */ -#if defined(CONFIG_CMD_KGDB) -# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - -/* values according to the manual */ - -#define CONFIG_DRAM_50MHZ 1 -#define CONFIG_SDRAM_50MHZ - -#undef NR_8259_INTS -#define NR_8259_INTS 1 - - -#define CONFIG_DISK_SPINUP_TIME 1000000 - - -#endif /* __CONFIG_H */ diff --git a/include/configs/eXalion.h b/include/configs/eXalion.h deleted file mode 100644 index 940be1f5d0..0000000000 --- a/include/configs/eXalion.h +++ /dev/null @@ -1,433 +0,0 @@ -/* - * (C) Copyright 2001 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* ------------------------------------------------------------------------- */ - -/* - * board/config.h - configuration options, board specific - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ - -/* #define CONFIG_MPC8240 1 */ -#define CONFIG_MPC8245 1 -#define CONFIG_EXALION 1 - -#define CONFIG_SYS_TEXT_BASE 0xFFF00000 - -#if defined (CONFIG_MPC8240) - /* #warning ---------- eXalion with MPC8240 --------------- */ -#elif defined (CONFIG_MPC8245) - /* #warning ++++++++++ eXalion with MPC8245 +++++++++++++++ */ -#elif defined (CONFIG_MPC8245) && defined (CONFIG_MPC8245) -#error #### Both types of MPC824x defined (CONFIG_8240 and CONFIG_8245) -#else -#error #### Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240) -#endif -/* older kernels need clock in MHz newer in Hz */ - /* #define CONFIG_CLOCKS_IN_MHZ 1 */ /* clocks passsed to Linux in MHz */ -#undef CONFIG_CLOCKS_IN_MHZ - -#define CONFIG_BOOTDELAY 10 - - - /*#define CONFIG_DRAM_SPEED 66 */ /* MHz */ - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_FLASH -#define CONFIG_CMD_SDRAM -#define CONFIG_CMD_I2C -#define CONFIG_CMD_IDE -#define CONFIG_CMD_FAT -#define CONFIG_CMD_SAVEENV -#define CONFIG_CMD_PCI - - -/*----------------------------------------------------------------------- - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP 1 /* undef to save memory */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 8 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_LOAD_ADDR 0x00100000 /* default load address */ -#define CONFIG_MISC_INIT_R 1 - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_MAX_RAM_SIZE 0x10000000 /* 1 GBytes - initdram() will */ - /* return real value. */ - -#define CONFIG_SYS_RESET_ADDRESS 0xFFF00100 - -#undef CONFIG_SYS_RAMBOOT -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area - */ -#define CONFIG_SYS_INIT_DATA_SIZE 128 - -#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 -#define CONFIG_SYS_INIT_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_INIT_DATA_SIZE) - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - - -#if defined (CONFIG_MPC8240) -#define CONFIG_SYS_FLASH_BASE 0xFFE00000 -#define CONFIG_SYS_FLASH_SIZE (2 * 1024 * 1024) /* onboard 2MByte flash */ -#elif defined (CONFIG_MPC8245) -#define CONFIG_SYS_FLASH_BASE 0xFFC00000 -#define CONFIG_SYS_FLASH_SIZE (4 * 1024 * 1024) /* onboard 4MByte flash */ -#else -#error Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240) -#endif - -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_SECT_SIZE 0x20000 /* Size of one Flash sector */ -#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE /* Use one Flash sector for environment */ -#define CONFIG_ENV_ADDR 0xFFFC0000 -#define CONFIG_ENV_OFFSET 0 /* starting right at the beginning */ - -#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */ - -#define CONFIG_SYS_ALT_MEMTEST 1 /* use real memory test */ -#define CONFIG_SYS_MEMTEST_START 0x00004000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x02000000 /* 0 ... 32 MB in DRAM */ - -#define CONFIG_SYS_EUMB_ADDR 0xFC000000 - -/* #define CONFIG_SYS_ISA_MEM 0xFD000000 */ -#define CONFIG_SYS_ISA_IO 0xFE000000 - -/*----------------------------------------------------------------------- - * FLASH organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* Max number of flash banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 64 /* Max number of sectors per flash */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ - -#define FLASH_BASE0_PRELIM CONFIG_SYS_FLASH_BASE -#define FLASH_BASE1_PRELIM 0 - - -/*----------------------------------------------------------------------- - * FLASH and environment organization - */ - -#define CONFIG_SYS_FLASH_CFI 1 /* Flash is CFI conformant */ -#define CONFIG_FLASH_CFI_DRIVER 1 /* Use the common driver */ -#define CONFIG_SYS_MAX_FLASH_SECT 64 /* max number of sectors on one chip */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_FLASH_INCREMENT 0 /* there is only one bank */ -#define CONFIG_SYS_FLASH_PROTECTION 1 /* use hardware protection */ -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ - - -/*----------------------------------------------------------------------- - * PCI stuff - */ -#define CONFIG_PCI 1 /* include pci support */ -#define CONFIG_PCI_INDIRECT_BRIDGE 1 /* indirect PCI bridge support */ -#undef CONFIG_PCI_PNP - - -#define CONFIG_EEPRO100 1 - -#define PCI_ENET0_MEMADDR 0x80000000 /* Intel 82559ER */ -#define PCI_ENET0_IOADDR 0x80000000 -#define PCI_ENET1_MEMADDR 0x81000000 /* Intel 82559ER */ -#define PCI_ENET1_IOADDR 0x81000000 -#define PCI_ENET2_MEMADDR 0x82000000 /* Broadcom BCM569xx */ -#define PCI_ENET2_IOADDR 0x82000000 -#define PCI_ENET3_MEMADDR 0x83000000 /* Broadcom BCM56xx */ -#define PCI_ENET3_IOADDR 0x83000000 - -/*----------------------------------------------------------------------- - * NS16550 Configuration - */ -#define CONFIG_SYS_NS16550 1 -#define CONFIG_SYS_NS16550_SERIAL 1 - -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 38400 - -#define CONFIG_SYS_NS16550_REG_SIZE 1 - -#if (CONFIG_CONS_INDEX == 1) -#define CONFIG_SYS_NS16550_CLK 1843200 /* COM1 only ! */ -#else -#define CONFIG_SYS_NS16550_CLK ({ extern ulong get_bus_freq (ulong); get_bus_freq (0); }) -#endif - -#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_ISA_IO + 0x3F8) -#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_EUMB_ADDR + 0x4500) -#define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_EUMB_ADDR + 0x4600) - -/*----------------------------------------------------------------------- - * select i2c support configuration - * - * Supported configurations are {none, software, hardware} drivers. - * If the software driver is chosen, there are some additional - * configuration items that the driver uses to drive the port pins. - */ -#define CONFIG_HARD_I2C 1 /* To enable I2C support */ -#undef CONFIG_SYS_I2C_SOFT /* I2C bit-banged */ -#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ -#define CONFIG_SYS_I2C_SLAVE 0x7F - -/*----------------------------------------------------------------------- - * Low Level Configuration Settings - * (address mappings, register initial values, etc.) - * You should know what you are doing if you make changes here. - */ - -#define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */ -#define CONFIG_PLL_PCI_TO_MEM_MULTIPLIER 2 /* for MPC8240 only */ - - /*#define CONFIG_133MHZ_DRAM 1 */ /* For 133 MHZ DRAM only !!!!!!!!!!! */ - -#if defined (CONFIG_MPC8245) -/* Bit-field values for PMCR2. */ -#if defined (CONFIG_133MHZ_DRAM) -#define CONFIG_SYS_DLL_EXTEND 0x80 /* use DLL extended range - 133MHz only */ -#define CONFIG_SYS_PCI_HOLD_DEL 0x20 /* delay and hold timing - 133MHz only */ -#endif - -/* Bit-field values for MIOCR1. */ -#if !defined (CONFIG_133MHZ_DRAM) -#define CONFIG_SYS_DLL_MAX_DELAY 0x04 /* longer DLL delay line - 66MHz only */ -#endif -/* Bit-field values for MIOCR2. */ -#define CONFIG_SYS_SDRAM_DSCD 0x20 /* SDRAM data in sample clock delay */ - /* - note bottom 3 bits MUST be 0 */ -#endif - -/* Bit-field values for MCCR1. */ -#define CONFIG_SYS_ROMNAL 7 /*rom/flash next access time */ -#define CONFIG_SYS_ROMFAL 11 /*rom/flash access time */ - -/* Bit-field values for MCCR2. */ -#define CONFIG_SYS_TSWAIT 0x5 /* Transaction Start Wait States timer */ -#if defined (CONFIG_133MHZ_DRAM) -#define CONFIG_SYS_REFINT 1300 /* no of clock cycles between CBR */ -#else /* refresh cycles */ -#define CONFIG_SYS_REFINT 750 -#endif - -/* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4. */ -#if defined (CONFIG_133MHZ_DRAM) -#define CONFIG_SYS_BSTOPRE 1023 -#else -#define CONFIG_SYS_BSTOPRE 250 -#endif - -/* Bit-field values for MCCR3. */ -/* the following are for SDRAM only */ - -#if defined (CONFIG_133MHZ_DRAM) -#define CONFIG_SYS_REFREC 9 /* Refresh to activate interval */ -#else -#define CONFIG_SYS_REFREC 5 /* Refresh to activate interval */ -#endif -#if defined (CONFIG_MPC8240) -#define CONFIG_SYS_RDLAT 2 /* data latency from read command */ -#endif - -/* Bit-field values for MCCR4. */ -#if defined (CONFIG_133MHZ_DRAM) -#define CONFIG_SYS_PRETOACT 3 /* Precharge to activate interval */ -#define CONFIG_SYS_ACTTOPRE 7 /* Activate to Precharge interval */ -#define CONFIG_SYS_ACTORW 5 /* Activate to R/W */ -#define CONFIG_SYS_SDMODE_CAS_LAT 3 /* SDMODE CAS latency */ -#else -#if 0 -#define CONFIG_SYS_PRETOACT 2 /* Precharge to activate interval */ -#define CONFIG_SYS_ACTTOPRE 3 /* Activate to Precharge interval */ -#define CONFIG_SYS_ACTORW 3 /* Activate to R/W */ -#define CONFIG_SYS_SDMODE_CAS_LAT 2 /* SDMODE CAS latency */ -#endif -#define CONFIG_SYS_PRETOACT 2 /* Precharge to activate interval */ -#define CONFIG_SYS_ACTTOPRE 5 /* Activate to Precharge interval */ -#define CONFIG_SYS_ACTORW 3 /* Activate to R/W */ -#define CONFIG_SYS_SDMODE_CAS_LAT 3 /* SDMODE CAS latency */ -#endif -#define CONFIG_SYS_SDMODE_WRAP 0 /* SDMODE wrap type */ -#define CONFIG_SYS_SDMODE_BURSTLEN 2 /* SDMODE Burst length 2=4, 3=8 */ -#define CONFIG_SYS_REGDIMM 0 -#if defined (CONFIG_MPC8240) -#define CONFIG_SYS_REGISTERD_TYPE_BUFFER 0 -#elif defined (CONFIG_MPC8245) -#define CONFIG_SYS_REGISTERD_TYPE_BUFFER 1 -#define CONFIG_SYS_EXTROM 0 -#else -#error Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240) -#endif - - -/*----------------------------------------------------------------------- - memory bank settings - * only bits 20-29 are actually used from these vales to set the - * start/end address the upper two bits will be 0, and the lower 20 - * bits will be set to 0x00000 for a start address, or 0xfffff for an - * end address - */ -#define CONFIG_SYS_BANK0_START 0x00000000 -#define CONFIG_SYS_BANK0_END (CONFIG_SYS_MAX_RAM_SIZE - 1) -#define CONFIG_SYS_BANK0_ENABLE 1 -#define CONFIG_SYS_BANK1_START 0x3ff00000 -#define CONFIG_SYS_BANK1_END 0x3fffffff -#define CONFIG_SYS_BANK1_ENABLE 0 -#define CONFIG_SYS_BANK2_START 0x3ff00000 -#define CONFIG_SYS_BANK2_END 0x3fffffff -#define CONFIG_SYS_BANK2_ENABLE 0 -#define CONFIG_SYS_BANK3_START 0x3ff00000 -#define CONFIG_SYS_BANK3_END 0x3fffffff -#define CONFIG_SYS_BANK3_ENABLE 0 -#define CONFIG_SYS_BANK4_START 0x00000000 -#define CONFIG_SYS_BANK4_END 0x00000000 -#define CONFIG_SYS_BANK4_ENABLE 0 -#define CONFIG_SYS_BANK5_START 0x00000000 -#define CONFIG_SYS_BANK5_END 0x00000000 -#define CONFIG_SYS_BANK5_ENABLE 0 -#define CONFIG_SYS_BANK6_START 0x00000000 -#define CONFIG_SYS_BANK6_END 0x00000000 -#define CONFIG_SYS_BANK6_ENABLE 0 -#define CONFIG_SYS_BANK7_START 0x00000000 -#define CONFIG_SYS_BANK7_END 0x00000000 -#define CONFIG_SYS_BANK7_ENABLE 0 - -/*----------------------------------------------------------------------- - * Memory bank enable bitmask, specifying which of the banks defined above - are actually present. MSB is for bank #7, LSB is for bank #0. - */ -#define CONFIG_SYS_BANK_ENABLE 0x01 - -#if defined (CONFIG_MPC8240) -#define CONFIG_SYS_ODCR 0xDF /* configures line driver impedances, */ - /* see 8240 book for bit definitions */ -#elif defined (CONFIG_MPC8245) -#if defined (CONFIG_133MHZ_DRAM) -#define CONFIG_SYS_ODCR 0xFE /* configures line driver impedances - 133MHz */ -#else -#define CONFIG_SYS_ODCR 0xDE /* configures line driver impedances - 66MHz */ -#endif -#else -#error Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240) -#endif - -#define CONFIG_SYS_PGMAX 0x32 /* how long the 8240 retains the */ - /* currently accessed page in memory */ - /* see 8240 book for details */ - -/*----------------------------------------------------------------------- - * Block Address Translation (BAT) register settings. - */ -/* SDRAM 0 - 256MB */ -#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) - -/* stack in DCACHE @ 1GB (no backing mem) */ -#define CONFIG_SYS_IBAT1L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT1U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP) - -/* PCI memory */ -#define CONFIG_SYS_IBAT2L (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT) -#define CONFIG_SYS_IBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP) - -/* Flash, config addrs, etc */ -#define CONFIG_SYS_IBAT3L (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT) -#define CONFIG_SYS_IBAT3U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP) - -#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L -#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U -#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L -#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U -#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L -#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U -#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L -#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U - - -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_CACHELINE_SIZE 32 -#if defined(CONFIG_CMD_KGDB) -# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - -/* values according to the manual */ -#define CONFIG_DRAM_50MHZ 1 -#define CONFIG_SDRAM_50MHZ - -#undef NR_8259_INTS -#define NR_8259_INTS 1 - -/*----------------------------------------------------------------------- - * IDE/ATA stuff - */ -#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 2 IDE busses */ -#define CONFIG_SYS_IDE_MAXDEVICE (CONFIG_SYS_IDE_MAXBUS*1) /* max. 2 drives per IDE bus */ - -#define CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_ISA_IO /* base address */ -#define CONFIG_SYS_ATA_IDE0_OFFSET 0x01F0 /* ide0 offste */ -#define CONFIG_SYS_ATA_IDE1_OFFSET 0x0170 /* ide1 offset */ -#define CONFIG_SYS_ATA_DATA_OFFSET 0 /* data reg offset */ -#define CONFIG_SYS_ATA_REG_OFFSET 0 /* reg offset */ -#define CONFIG_SYS_ATA_ALT_OFFSET 0x200 /* alternate register offset */ - -#define CONFIG_ATAPI - -#undef CONFIG_IDE_8xx_DIRECT /* no pcmcia interface required */ -#undef CONFIG_IDE_LED /* no led for ide supported */ -#undef CONFIG_IDE_RESET /* reset for ide supported... */ -#undef CONFIG_IDE_RESET_ROUTINE /* with a special reset function */ - -/*----------------------------------------------------------------------- - * DISK Partition support - */ -#define CONFIG_DOS_PARTITION - -/*----------------------------------------------------------------------- - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -#endif /* __CONFIG_H */ diff --git a/include/configs/utx8245.h b/include/configs/utx8245.h deleted file mode 100644 index 5be62ecb2d..0000000000 --- a/include/configs/utx8245.h +++ /dev/null @@ -1,408 +0,0 @@ -/* - * (C) Copyright 2001 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * (C) Copyright 2002 - * Gregory E. Allen, gallen@arlut.utexas.edu - * Matthew E. Karger, karger@arlut.utexas.edu - * Applied Research Laboratories, The University of Texas at Austin - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * - * Configuration settings for the utx8245 board. - * - */ - -/* ------------------------------------------------------------------------- */ - -/* - * board/config.h - configuration options, board specific - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_MPC8245 1 -#define CONFIG_UTX8245 1 - -#define CONFIG_SYS_TEXT_BASE 0xFFF00000 - -#define DEBUG 1 - -#define CONFIG_IDENT_STRING " [UTX5] " - -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 57600 - -#define CONFIG_BOOTDELAY 2 -#define CONFIG_AUTOBOOT_PROMPT "autoboot in %d seconds\n", bootdelay -#define CONFIG_BOOTCOMMAND "run nfsboot" /* autoboot command */ -#define CONFIG_BOOTARGS "root=/dev/ram console=ttyS0,57600" /* RAMdisk */ -#define CONFIG_ETHADDR 00:AA:00:14:00:05 /* UTX5 */ -#define CONFIG_SERVERIP 10.8.17.105 /* Spree */ - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "kernel_addr=FFA00000\0" \ - "ramdisk_addr=FF800000\0" \ - "u-boot_startaddr=FFB00000\0" \ - "u-boot_endaddr=FFB2FFFF\0" \ - "nfsargs=setenv bootargs console=ttyS0,${baudrate} root=/dev/nfs rw \ -nfsroot=${nfsrootip}:${rootpath} ip=dhcp\0" \ - "ramargs=setenv bootargs console=ttyS0,${baudrate} root=/dev/ram0\0" \ - "smargs=setenv bootargs console=ttyS0,${baudrate} root=/dev/mtdblock1 ro\0" \ - "fwargs=setenv bootargs console=ttyS0,${baudrate} root=/dev/sda2 ro\0" \ - "nfsboot=run nfsargs;bootm ${kernel_addr}\0" \ - "ramboot=run ramargs;bootm ${kernel_addr} ${ramdisk_addr}\0" \ - "smboot=run smargs;bootm ${kernel_addr} ${ramdisk_addr}\0" \ - "fwboot=run fwargs;bootm ${kernel_addr} ${ramdisk_addr}\0" \ - "update_u-boot=tftp ${loadaddr} /bdi2000/u-boot.bin;protect off \ -${u-boot_startaddr} ${u-boot_endaddr};era ${u-boot_startaddr} \ -${u-boot_endaddr};cp.b ${loadaddr} ${u-boot_startaddr} ${filesize};\ -protect on ${u-boot_startaddr} ${u-boot_endaddr}" - -#define CONFIG_ENV_OVERWRITE - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_BDI -#define CONFIG_CMD_PCI -#define CONFIG_CMD_FLASH -#define CONFIG_CMD_MEMORY -#define CONFIG_CMD_SAVEENV -#define CONFIG_CMD_CONSOLE -#define CONFIG_CMD_LOADS -#define CONFIG_CMD_LOADB -#define CONFIG_CMD_IMI -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_REGINFO -#define CONFIG_CMD_NET -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_I2C -#define CONFIG_CMD_DATE - - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ - -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) - -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_LOAD_ADDR 0x00100000 /* Default load address */ - - -/*----------------------------------------------------------------------- - * PCI configuration - *----------------------------------------------------------------------- - */ -#define CONFIG_PCI /* include pci support */ -#define CONFIG_PCI_INDIRECT_BRIDGE 1 /* indirect PCI bridge support */ -#undef CONFIG_PCI_PNP -#define CONFIG_PCI_SCAN_SHOW -#define CONFIG_EEPRO100 -#define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ -#define CONFIG_EEPRO100_SROM_WRITE - -#define PCI_ENET0_IOADDR 0xF0000000 -#define PCI_ENET0_MEMADDR 0xF0000000 - -#define PCI_FIREWIRE_IOADDR 0xF1000000 -#define PCI_FIREWIRE_MEMADDR 0xF1000000 -/* -#define PCI_ENET0_IOADDR 0xFE000000 -#define PCI_ENET0_MEMADDR 0x80000000 - -#define PCI_FIREWIRE_IOADDR 0x81000000 -#define PCI_FIREWIRE_MEMADDR 0x81000000 -*/ - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_MAX_RAM_SIZE 0x10000000 /* 256MB */ -/*#define CONFIG_SYS_VERY_BIG_RAM 1 */ - -/* FLASH_BASE is FF800000, with 4MB on RCS0, but the reset vector - * is actually located at FFF00100. Therefore, U-Boot is - * physically located at 0xFFB0_0000, but is also mirrored at - * 0xFFF0_0000. - */ -#define CONFIG_SYS_RESET_ADDRESS 0xFFF00100 - -#define CONFIG_SYS_EUMB_ADDR 0xFC000000 - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE - -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ - -/*#define CONFIG_SYS_DRAM_TEST 1 */ -#define CONFIG_SYS_MEMTEST_START 0x00003000 /* memtest works on 0...256 MB */ -#define CONFIG_SYS_MEMTEST_END 0x0ff8ffa7 /* in SDRAM, skips exception */ - /* vectors and U-Boot */ - - -/*-------------------------------------------------------------------- - * Definitions for initial stack pointer and data area - *------------------------------------------------------------------*/ -#define CONFIG_SYS_INIT_DATA_SIZE 128 /* Size in bytes reserved for */ - /* initial data */ -#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 -#define CONFIG_SYS_INIT_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_INIT_DATA_SIZE) -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - -/*-------------------------------------------------------------------- - * NS16550 Configuration - *------------------------------------------------------------------*/ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL - -#define CONFIG_SYS_NS16550_REG_SIZE 1 - -#if (CONFIG_CONS_INDEX == 1 || CONFIG_CONS_INDEX == 2) -# define CONFIG_SYS_NS16550_CLK get_bus_freq(0) -#else -# define CONFIG_SYS_NS16550_CLK 33000000 -#endif - -#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_EUMB_ADDR + 0x4500) -#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_EUMB_ADDR + 0x4600) -#define CONFIG_SYS_NS16550_COM3 0xFF000000 -#define CONFIG_SYS_NS16550_COM4 0xFF000008 - -/*-------------------------------------------------------------------- - * Low Level Configuration Settings - * (address mappings, register initial values, etc.) - * You should know what you are doing if you make changes here. - * For the detail description refer to the MPC8240 user's manual. - *------------------------------------------------------------------*/ - -#define CONFIG_SYS_CLK_FREQ 33000000 - -/*#define CONFIG_SYS_ETH_DEV_FN 0x7800 */ -/*#define CONFIG_SYS_ETH_IOBASE 0x00104000 */ - -/*-------------------------------------------------------------------- - * I2C Configuration - *------------------------------------------------------------------*/ -#if 1 -#define CONFIG_HARD_I2C 1 /* To enable I2C support */ -#define CONFIG_SYS_I2C_SPEED 400000 -#define CONFIG_SYS_I2C_SLAVE 0x7F -#endif - -#define CONFIG_RTC_PCF8563 1 /* enable I2C support for */ - /* Philips PCF8563 RTC */ -#define CONFIG_SYS_I2C_RTC_ADDR 0x51 /* Philips PCF8563 RTC address */ - -/*-------------------------------------------------------------------- - * Memory Control Configuration Register values - * - see sec. 4.12 of MPC8245 UM - *------------------------------------------------------------------*/ - -/**** MCCR1 ****/ -#define CONFIG_SYS_ROMNAL 0 -#define CONFIG_SYS_ROMFAL 10 /* (tacc=70ns)*mem_freq - 2, - mem_freq = 100MHz */ - -#define CONFIG_SYS_BANK7_ROW 0 /* SDRAM bank 7-0 row address */ -#define CONFIG_SYS_BANK6_ROW 0 /* bit count */ -#define CONFIG_SYS_BANK5_ROW 0 -#define CONFIG_SYS_BANK4_ROW 0 -#define CONFIG_SYS_BANK3_ROW 0 -#define CONFIG_SYS_BANK2_ROW 0 -#define CONFIG_SYS_BANK1_ROW 2 -#define CONFIG_SYS_BANK0_ROW 2 - -/**** MCCR2, refresh interval clock cycles ****/ -#define CONFIG_SYS_REFINT 480 /* 33 MHz SDRAM clock was 480 */ - -/* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4. */ -#define CONFIG_SYS_BSTOPRE 1023 /* burst to precharge[0..9], */ - /* sets open page interval */ - -/**** MCCR3 ****/ -#define CONFIG_SYS_REFREC 7 /* Refresh to activate interval, trc */ - -/**** MCCR4 ****/ -#define CONFIG_SYS_PRETOACT 2 /* trp */ -#define CONFIG_SYS_ACTTOPRE 7 /* trcd + (burst length - 1) + trdl */ -#define CONFIG_SYS_SDMODE_CAS_LAT 3 /* SDMODE CAS latancy */ -#define CONFIG_SYS_SDMODE_WRAP 0 /* SDMODE wrap type, sequential */ -#define CONFIG_SYS_ACTORW 2 /* trcd min */ -#define CONFIG_SYS_DBUS_SIZE2 1 /* set for 8-bit RCS1, clear for 32,64 */ -#define CONFIG_SYS_REGISTERD_TYPE_BUFFER 1 -#define CONFIG_SYS_EXTROM 0 /* we don't need extended ROM space */ -#define CONFIG_SYS_REGDIMM 0 - -/* calculate according to formula in sec. 6-22 of 8245 UM */ -#define CONFIG_SYS_PGMAX 50 /* how long the 8245 retains the */ - /* currently accessed page in memory */ - /* was 45 */ - -#define CONFIG_SYS_SDRAM_DSCD 0x20 /* SDRAM data in sample clock delay - note */ - /* bits 7,6, and 3-0 MUST be 0 */ - -#if 0 -#define CONFIG_SYS_DLL_MAX_DELAY 0x04 -#else -#define CONFIG_SYS_DLL_MAX_DELAY 0 -#endif -#if 0 /* need for 33MHz SDRAM */ -#define CONFIG_SYS_DLL_EXTEND 0x80 -#else -#define CONFIG_SYS_DLL_EXTEND 0 -#endif -#define CONFIG_SYS_PCI_HOLD_DEL 0x20 - - -/* Memory bank settings. - * Only bits 20-29 are actually used from these values to set the - * start/end addresses. The upper two bits will always be 0, and the lower - * 20 bits will be 0x00000 for a start address, or 0xfffff for an end - * address. Refer to the MPC8245 user manual. - */ - -#define CONFIG_SYS_BANK0_START 0x00000000 -#define CONFIG_SYS_BANK0_END (CONFIG_SYS_MAX_RAM_SIZE/2 - 1) -#define CONFIG_SYS_BANK0_ENABLE 1 -#define CONFIG_SYS_BANK1_START CONFIG_SYS_MAX_RAM_SIZE/2 -#define CONFIG_SYS_BANK1_END (CONFIG_SYS_MAX_RAM_SIZE - 1) -#define CONFIG_SYS_BANK1_ENABLE 1 -#define CONFIG_SYS_BANK2_START 0x3ff00000 /* not available in this design */ -#define CONFIG_SYS_BANK2_END 0x3fffffff -#define CONFIG_SYS_BANK2_ENABLE 0 -#define CONFIG_SYS_BANK3_START 0x3ff00000 -#define CONFIG_SYS_BANK3_END 0x3fffffff -#define CONFIG_SYS_BANK3_ENABLE 0 -#define CONFIG_SYS_BANK4_START 0x3ff00000 -#define CONFIG_SYS_BANK4_END 0x3fffffff -#define CONFIG_SYS_BANK4_ENABLE 0 -#define CONFIG_SYS_BANK5_START 0x3ff00000 -#define CONFIG_SYS_BANK5_END 0x3fffffff -#define CONFIG_SYS_BANK5_ENABLE 0 -#define CONFIG_SYS_BANK6_START 0x3ff00000 -#define CONFIG_SYS_BANK6_END 0x3fffffff -#define CONFIG_SYS_BANK6_ENABLE 0 -#define CONFIG_SYS_BANK7_START 0x3ff00000 -#define CONFIG_SYS_BANK7_END 0x3fffffff -#define CONFIG_SYS_BANK7_ENABLE 0 - -/*--------------------------------------------------------------------*/ -/* 4.4 - Output Driver Control Register */ -/*--------------------------------------------------------------------*/ -#define CONFIG_SYS_ODCR 0xe5 - -/*--------------------------------------------------------------------*/ -/* 4.8 - Error Handling Registers */ -/*-------------------------------CONFIG_SYS_SDMODE_BURSTLEN-------------------------------------*/ -#define CONFIG_SYS_ERRENR1 0x11 /* enable SDRAM refresh overflow error */ - -/* SDRAM 0-256 MB */ -#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) -/*#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_CACHEINHIBIT) */ -#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) - -/* stack in dcache */ -#define CONFIG_SYS_IBAT1L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT1U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP) - - -#define CONFIG_SYS_IBAT2L (CONFIG_SYS_SDRAM_BASE + 0x10000000 | BATL_PP_10 | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT2U (CONFIG_SYS_SDRAM_BASE + 0x10000000| BATU_BL_256M | BATU_VS | BATU_VP) - -/* PCI memory */ -/*#define CONFIG_SYS_IBAT2L (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT) */ -/*#define CONFIG_SYS_IBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP) */ - -/*Flash, config addrs, etc. */ -#define CONFIG_SYS_IBAT3L (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT) -#define CONFIG_SYS_IBAT3U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP) - -#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L -#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U -#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L -#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U -#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L -#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U -#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L -#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/*----------------------------------------------------------------------- - * FLASH organization - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_FLASH_BASE 0xFF800000 -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* Max number of flash banks */ - -/* NOTE: environment is not EMBEDDED in the u-boot code. - It's stored in flash in its own separate sector. */ -#define CONFIG_ENV_IS_IN_FLASH 1 - -#if 1 /* AMD AM29LV033C */ -#define CONFIG_SYS_MAX_FLASH_SECT 64 /* Max number of sectors in one bank */ -#define CONFIG_ENV_ADDR 0xFFBF0000 /* flash sector SA63 */ -#define CONFIG_ENV_SECT_SIZE (64*1024) /* Size of the Environment Sector */ -#else /* AMD AM29LV116D */ -#define CONFIG_SYS_MAX_FLASH_SECT 35 /* Max number of sectors in one bank */ -#define CONFIG_ENV_ADDR 0xFF9FA000 /* flash sector SA33 */ -#define CONFIG_ENV_SECT_SIZE (8*1024) /* Size of the Environment Sector */ -#endif /* #if */ - -#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE /* Size of the Environment */ -#define CONFIG_ENV_OFFSET 0 /* starting right at the beginning */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ - -#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE -#undef CONFIG_SYS_RAMBOOT -#else -#define CONFIG_SYS_RAMBOOT -#endif - - -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_CACHELINE_SIZE 32 -#if defined(CONFIG_CMD_KGDB) -# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - -#endif /* __CONFIG_H */ diff --git a/include/mpc824x.h b/include/mpc824x.h deleted file mode 100644 index 31d6f693da..0000000000 --- a/include/mpc824x.h +++ /dev/null @@ -1,523 +0,0 @@ -/* - * Copyright Rob Taylor, Flying Pig Systems Ltd. 2000. - * Copyright (C) 2001, James Dougherty, jfd@cs.stanford.edu - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __MPC824X_H__ -#define __MPC824X_H__ - -#include <config.h> - -/* CPU Types */ -#define CPU_TYPE_601 0x01 /* PPC 601 CPU */ -#define CPU_TYPE_602 0x02 /* PPC 602 CPU */ -#define CPU_TYPE_603 0x03 /* PPC 603 CPU */ -#define CPU_TYPE_603E 0x06 /* PPC 603e CPU */ -#define CPU_TYPE_603P 0x07 /* PPC 603p CPU */ -#define CPU_TYPE_604 0x04 /* PPC 604 CPU */ -#define CPU_TYPE_604E 0x09 /* PPC 604e CPU */ -#define CPU_TYPE_604R 0x0a /* PPC 604r CPU */ -#define CPU_TYPE_750 0x08 /* PPC 750 CPU */ -#define CPU_TYPE_8240 0x81 /* PPC 8240 CPU */ -#define CPU_TYPE_8245 0x8081 /* PPC 8245/8241 CPU */ -#define _CACHE_ALIGN_SIZE 32 /* cache line size */ - -/* spr976 - DMISS data tlb miss address register - * spr977 - DCMP data tlb miss compare register - * spr978 - HASH1 PTEG1 address register - * spr980 - HASH2 PTEG2 address register - * IMISS - instruction tlb miss address register - * ICMP - instruction TLB mis compare register - * RPA - real page address register - * HID0 - hardware implemntation register - * HID2 - instruction address breakpoint register - */ - -/* Kahlua/MPC8240 defines */ -#define VEN_DEV_ID 0x00021057 /* Vendor and Dev. ID for MPC106 */ -#define KAHLUA_ID 0x00031057 /* Vendor & Dev Id for Kahlua's PCI */ -#define KAHLUA2_ID 0x00061057 /* 8245 is aka Kahlua-2 */ -#define BMC_BASE 0x80000000 /* Kahlua ID in PCI Memory space */ -#define CHRP_REG_ADDR 0xfec00000 /* MPC107 Config, Map B */ -#define CHRP_REG_DATA 0xfee00000 /* MPC107 Config, Map B */ -#define CHRP_ISA_MEM_PHYS 0xfd000000 -#define CHRP_ISA_MEM_BUS 0x00000000 -#define CHRP_ISA_MEM_SIZE 0x01000000 -#define CHRP_ISA_IO_PHYS 0xfe000000 -#define CHRP_ISA_IO_BUS 0x00000000 -#define CHRP_ISA_IO_SIZE 0x00800000 -#define CHRP_PCI_IO_PHYS 0xfe800000 -#define CHRP_PCI_IO_BUS 0x00800000 -#define CHRP_PCI_IO_SIZE 0x00400000 -#define CHRP_PCI_MEM_PHYS 0x80000000 -#define CHRP_PCI_MEM_BUS 0x80000000 -#define CHRP_PCI_MEM_SIZE 0x7d000000 -#define CHRP_PCI_MEMORY_PHYS 0x00000000 -#define CHRP_PCI_MEMORY_BUS 0x00000000 -#define CHRP_PCI_MEMORY_SIZE 0x40000000 -#define PREP_REG_ADDR 0x80000cf8 /* MPC107 Config, Map A */ -#define PREP_REG_DATA 0x80000cfc /* MPC107 Config, Map A */ -#define PREP_ISA_IO_PHYS 0x80000000 -#define PREP_ISA_IO_BUS 0x00000000 -#define PREP_ISA_IO_SIZE 0x00800000 -#define PREP_PCI_IO_PHYS 0x81000000 -#define PREP_PCI_IO_BUS 0x01000000 -#define PREP_PCI_IO_SIZE 0x3e800000 -#define PREP_PCI_MEM_PHYS 0xc0000000 -#define PREP_PCI_MEM_BUS 0x00000000 -#define PREP_PCI_MEM_SIZE 0x3f000000 -#define PREP_PCI_MEMORY_PHYS 0x00000000 -#define PREP_PCI_MEMORY_BUS 0x80000000 -#define PREP_PCI_MEMORY_SIZE 0x80000000 -#define MPC107_PCI_CMD 0x80000004 /* MPC107 PCI cmd reg */ -#define MPC107_PCI_STAT 0x80000006 /* MPC107 PCI status reg */ -#define PROC_INT1_ADR 0x800000a8 /* MPC107 Processor i/f cfg1 */ -#define PROC_INT2_ADR 0x800000ac /* MPC107 Processor i/f cfg2 */ -#define MEM_CONT1_ADR 0x800000f0 /* MPC107 Memory control config. 1 */ -#define MEM_CONT2_ADR 0x800000f4 /* MPC107 Memory control config. 2 */ -#define MEM_CONT3_ADR 0x800000f8 /* MPC107 Memory control config. 3 */ -#define MEM_CONT4_ADR 0x800000fc /* MPC107 Memory control config. 4 */ -#define MEM_ERREN1_ADR 0x800000c0 /* MPC107 Memory error enable 1 */ -#define MEM_START1_ADR 0x80000080 /* MPC107 Memory starting addr */ -#define MEM_START2_ADR 0x80000084 /* MPC107 Memory starting addr-lo */ -#define XMEM_START1_ADR 0x80000088 /* MPC107 Extended mem. start addr-hi*/ -#define XMEM_START2_ADR 0x8000008c /* MPC107 Extended mem. start addr-lo*/ -#define MEM_END1_ADR 0x80000090 /* MPC107 Memory ending address */ -#define MEM_END2_ADR 0x80000094 /* MPC107 Memory ending addr-lo */ -#define XMEM_END1_ADR 0x80000098 /* MPC107 Extended mem. end addrs-hi */ -#define XMEM_END2_ADR 0x8000009c /* MPC107 Extended mem. end addrs-lo*/ -#define OUT_DRV_CONT 0x80000073 /* MPC107 Output Driver Control reg */ -#define MEM_EN_ADR 0x800000a0 /* Memory bank enable */ -#define PAGE_MODE 0x800000a3 /* MPC107 Page Mode Counter/Timer */ - -/*----------------------------------------------------------------------- - * Exception offsets (PowerPC standard) - */ -#define EXC_OFF_RESERVED0 0x0000 /* Reserved */ -#define EXC_OFF_SYS_RESET 0x0100 /* System reset */ -#define EXC_OFF_MACH_CHCK 0x0200 /* Machine Check */ -#define EXC_OFF_DATA_STOR 0x0300 /* Data Storage */ -#define EXC_OFF_INS_STOR 0x0400 /* Instruction Storage */ -#define EXC_OFF_EXTERNAL 0x0500 /* External */ -#define EXC_OFF_ALIGN 0x0600 /* Alignment */ -#define EXC_OFF_PROGRAM 0x0700 /* Program */ -#define EXC_OFF_FPUNAVAIL 0x0800 /* Floating-point Unavailable */ -#define EXC_OFF_DECR 0x0900 /* Decrementer */ -#define EXC_OFF_RESERVED1 0x0A00 /* Reserved */ -#define EXC_OFF_RESERVED2 0x0B00 /* Reserved */ -#define EXC_OFF_SYS_CALL 0x0C00 /* System Call */ -#define EXC_OFF_TRACE 0x0D00 /* Trace */ -#define EXC_OFF_FPUNASSIST 0x0E00 /* Floating-point Assist */ - - /* 0x0E10 - 0x0FFF are marked reserved in The PowerPC Architecture book */ - /* these found in DINK code - may not apply to 8240*/ -#define EXC_OFF_PMI 0x0F00 /* Performance Monitoring Interrupt */ -#define EXC_OFF_VMXUI 0x0F20 /* VMX (AltiVec) Unavailable Interrupt */ - - /* 0x1000 - 0x2FFF are implementation specific */ - /* these found in DINK code - may not apply to 8240 */ -#define EXC_OFF_ITME 0x1000 /* Instruction Translation Miss Exception */ -#define EXC_OFF_DLTME 0x1100 /* Data Load Translation Miss Exception */ -#define EXC_OFF_DSTME 0x1200 /* Data Store Translation Miss Exception */ -#define EXC_OFF_IABE 0x1300 /* Instruction Addr Breakpoint Exception */ -#define EXC_OFF_SMIE 0x1400 /* System Management Interrupt Exception */ -#define EXC_OFF_JMDDI 0x1600 /* Java Mode denorm detect Interr -- WTF??*/ -#define EXC_OFF_RMTE 0x2000 /* Run Mode or Trace Exception */ - -#define _START_OFFSET EXC_OFF_SYS_RESET - -#define MAP_A_CONFIG_ADDR_HIGH 0x8000 /* Upper half of CONFIG_ADDR for Map A */ -#define MAP_A_CONFIG_ADDR_LOW 0x0CF8 /* Lower half of CONFIG_ADDR for Map A */ -#define MAP_A_CONFIG_DATA_HIGH 0x8000 /* Upper half of CONFIG_DAT for Map A */ -#define MAP_A_CONFIG_DATA_LOW 0x0CFC /* Lower half of CONFIG_DAT for Map A */ -#define MAP_B_CONFIG_ADDR_HIGH 0xfec0 /* Upper half of CONFIG_ADDR for Map B */ -#define MAP_B_CONFIG_ADDR_LOW 0x0000 /* Lower half of CONFIG_ADDR for Map B */ -#define MAP_B_CONFIG_DATA_HIGH 0xfee0 /* Upper half of CONFIG_DAT for Map B */ -#define MAP_B_CONFIG_DATA_LOW 0x0000 /* Lower half of CONFIG_DAT for Map B */ - - -#if defined(CONFIG_SYS_ADDR_MAP_A) -#define CONFIG_ADDR_HIGH MAP_A_CONFIG_ADDR_HIGH /* Upper half of CONFIG_ADDR */ -#define CONFIG_ADDR_LOW MAP_A_CONFIG_ADDR_LOW /* Lower half of CONFIG_ADDR */ -#define CONFIG_DATA_HIGH MAP_A_CONFIG_DATA_HIGH /* Upper half of CONFIG_DAT */ -#define CONFIG_DATA_LOW MAP_A_CONFIG_DATA_LOW /* Lower half of CONFIG_DAT */ -#else /* Assume Map B, default */ -#define CONFIG_ADDR_HIGH MAP_B_CONFIG_ADDR_HIGH /* Upper half of CONFIG_ADDR */ -#define CONFIG_ADDR_LOW MAP_B_CONFIG_ADDR_LOW /* Lower half of CONFIG_ADDR */ -#define CONFIG_DATA_HIGH MAP_B_CONFIG_DATA_HIGH /* Upper half of CONFIG_DAT */ -#define CONFIG_DATA_LOW MAP_B_CONFIG_DATA_LOW /* Lower half of CONFIG_DAT */ -#endif - -#define CONFIG_ADDR (CONFIG_ADDR_HIGH << 16 | CONFIG_ADDR_LOW) - -#define CONFIG_DATA (CONFIG_DATA_HIGH << 16 | CONFIG_DATA_LOW) - -/* Macros to write to config registers. addr should be a constant in all cases */ - -#define CONFIG_WRITE_BYTE( addr, data ) \ - __asm__ __volatile__( \ - " stwbrx %1, 0, %0\n \ - sync\n \ - stb %3, %4(%2)\n \ - sync " \ - : /* no output */ \ - : "r" (CONFIG_ADDR), "r" ((addr) & ~3), \ - "b" (CONFIG_DATA), "r" (data), \ - "n" ((addr) & 3)); - -#define CONFIG_WRITE_HALFWORD( addr, data ) \ - __asm__ __volatile__( \ - " stwbrx %1, 0, %0\n \ - sync\n \ - sthbrx %3, %4, %2\n \ - sync " \ - : /* no output */ \ - : "r" (CONFIG_ADDR), "r" ((addr) & ~3), \ - "r" (CONFIG_DATA), "r" (data), \ - "b" ((addr) & 3)); - -/* this assumes it's writeing on word boundaries*/ -#define CONFIG_WRITE_WORD( addr, data ) \ - __asm__ __volatile__( \ - " stwbrx %1, 0, %0\n \ - sync\n \ - stwbrx %3, 0, %2\n \ - sync " \ - : /* no output */ \ - : "r" (CONFIG_ADDR), "r" (addr), \ - "r" (CONFIG_DATA), "r" (data)); - -/* Configuration register reads*/ - -#define CONFIG_READ_BYTE( addr, reg ) \ - __asm__ ( \ - " stwbrx %1, 0, %2\n \ - sync\n \ - lbz %0, %4(%3)\n \ - sync " \ - : "=r" (reg) \ - : "r" ((addr) & ~3), "r" (CONFIG_ADDR), \ - "b" (CONFIG_DATA), "n" ((addr) & 3)); - - -#define CONFIG_READ_HALFWORD( addr, reg ) \ - __asm__ ( \ - " stwbrx %1, 0, %2\n \ - sync\n \ - lhbrx %0, %4, %3\n \ - sync " \ - : "=r" (reg) \ - : "r" ((addr) & ~3), "r" (CONFIG_ADDR), \ - "r" (CONFIG_DATA), \ - "b" ((addr) & 3)); - -/* this assumes it's reading on word boundaries*/ -#define CONFIG_READ_WORD( addr, reg ) \ - __asm__ ( \ - " stwbrx %1, 0, %2\n \ - sync\n \ - lwbrx %0, 0, %3\n \ - sync " \ - : "=r" (reg) \ - : "r" (addr), "r" (CONFIG_ADDR),\ - "r" (CONFIG_DATA)); - -/* - * configuration register 'addresses'. - * These are described in chaper 5 of the 8240 users manual. - * Where the register has an abreviation in the manual, this has - * been usaed here, otherwise a name in keeping with the norm has - * been invented. - * Note that some of these registers aren't documented in the manual. - */ - -#define PCICR 0x80000004 /* PCI Command Register */ -#define PCISR 0x80000006 /* PCI Status Register */ -#define REVID 0x80000008 /* CPU revision id */ -#define PIR 0x80000009 /* PCI Programming Interface Register */ -#define PBCCR 0x8000000b /* PCI Base Class Code Register */ -#define PCLSR 0x8000000c /* Processor Cache Line Size Register */ -#define PLTR 0x8000000d /* PCI Latancy Timer Register */ -#define PHTR 0x8000000e /* PCI Header Type Register */ -#define BISTCTRL 0x8000000f /* BIST Control */ -#define LMBAR 0x80000010 /* Local Base Address Register */ -#define PCSRBAR 0x80000014 /* PCSR Base Address Register */ -#define ILR 0x8000003c /* PCI Interrupt Line Register */ -#define IPR 0x8000003d /* Interrupt Pin Register */ -#define MINGNT 0x8000003e /* MIN GNI */ -#define MAXLAT 0x8000003f /* MAX LAT */ -#define PCIACR 0x80000046 /* PCI Arbiter Control Register */ -#define PMCR1 0x80000070 /* Power management config. 1 */ -#define PMCR2 0x80000072 /* Power management config. 2 */ -#define ODCR 0x80000073 /* Output Driver Control Register */ -#define CLKDCR 0x80000074 /* CLK Driver Control Register */ -#if defined(CONFIG_MPC8245) || defined(CONFIG_MPC8241) -#define MIOCR1 0x80000076 /* Miscellaneous I/O Control Register 1 */ -#define MIOCR2 0x80000077 /* Miscellaneous I/O Control Register 2 */ -#endif -#define EUMBBAR 0x80000078 /* Embedded Utilities Memory Block Base Address Register */ -#define EUMBBAR_VAL 0x80500000 /* PCI Relocation offset for EUMB region */ -#define EUMBSIZE 0x00100000 /* Size of EUMB region */ - -#define MSAR1 0x80000080 /* Memory Starting Address Register 1 */ -#define MSAR2 0x80000084 /* Memory Starting Address Register 2 */ -#define EMSAR1 0x80000088 /* Extended Memory Starting Address Register 1*/ -#define EMSAR2 0x8000008c /* Extended Memory Starting Address Register 2*/ -#define MEAR1 0x80000090 /* Memory Ending Address Register 1 */ -#define MEAR2 0x80000094 /* Memory Ending Address Register 2 */ -#define EMEAR1 0x80000098 /* Extended Memory Ending Address Register 1 */ -#define EMEAR2 0x8000009c /* Extended Memory Ending Address Register 2 */ -#define MBER 0x800000a0 /* Memory bank Enable Register*/ -#define MPMR 0x800000a3 /* Memory Page Mode Register (stores PGMAX) */ -#define PICR1 0x800000a8 /* Processor Interface Configuration Register 1 */ -#define PICR2 0x800000ac /* Processor Interface Configuration Register 2 */ -#define ECCSBECR 0x800000b8 /* ECC Single-Bit Error Counter Register */ -#define ECCSBETR 0x800000b8 /* ECC Single-Bit Error Trigger Register */ -#define ERRENR1 0x800000c0 /* Error Enableing Register 1 */ -#define ERRENR2 0x800000c4 /* Error Enableing Register 2 */ -#define ERRDR1 0x800000c1 /* Error Detection Register 1 */ -#define IPBESR 0x800000c3 /* Internal Processor Error Status Register */ -#define ERRDR2 0x800000c5 /* Error Detection Register 2 */ -#define PBESR 0x800000c7 /* PCI Bus Error Status Register */ -#define PBEAR 0x800000c8 /* Processor/PCI Bus Error Status Register */ -#define AMBOR 0x800000e0 /* Address Map B Options Register */ -#define PCMBCR 0x800000e1 /* PCI/Memory Buffer Configuration */ -#define MCCR1 0x800000f0 /* Memory Control Configuration Register 1 */ -#define MCCR2 0x800000f4 /* Memory Control Configuration Register 2 */ -#define MCCR3 0x800000f8 /* Memory Control Configuration Register 3 */ -#define MCCR4 0x800000fc /* Memory Control Configuration Register 4 */ - -/* some values for some of the above */ - -#define PICR1_CF_APARK 0x00000008 -#define PICR1_LE_MODE 0x00000020 -#define PICR1_ST_GATH_EN 0x00000040 -#if defined(CONFIG_MPC8240) -#define PICR1_EN_PCS 0x00000080 /* according to dink code, sets the 8240 to handle pci config space */ -#elif defined(CONFIG_MPC8245) || defined(CONFIG_MPC8241) -#define PICR1_NO_BUSW_CK 0x00000080 /* no bus width check for flash writes */ -#define PICR1_DEC 0x00000100 /* Time Base enable on 8245/8241 */ -#define ERCR1 0x800000d0 /* Extended ROM Configuration Register 1 */ -#define ERCR2 0x800000d4 /* Extended ROM Configuration Register 2 */ -#define ERCR3 0x800000d8 /* Extended ROM Configuration Register 3 */ -#define ERCR4 0x800000dc /* Extended ROM Configuration Register 4 */ -#define MIOCR1 0x80000076 /* Miscellaneous I/O Control Register 1 */ -#define MIOCR1_ADR_X 0x80000074 /* Miscellaneous I/O Control Register 1 */ -#define MIOCR1_SHIFT 2 -#define MIOCR2 0x80000077 /* Miscellaneous I/O Control Register 2 */ -#define MIOCR2_ADR_X 0x80000074 /* Miscellaneous I/O Control Register 1 */ -#define MIOCR2_SHIFT 3 -#define ODCR_ADR_X 0x80000070 /* Output Driver Control register */ -#define ODCR_SHIFT 3 -#define PMCR2_ADR 0x80000072 /* Power Mgmnt Cfg 2 register */ -#define PMCR2_ADR_X 0x80000070 -#define PMCR2_SHIFT 3 -#define PMCR1_ADR 0x80000070 /* Power Mgmnt Cfg 1 reister */ -#else -#error Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240) -#endif -#define PICR1_CF_DPARK 0x00000200 -#define PICR1_MCP_EN 0x00000800 -#define PICR1_FLASH_WR_EN 0x00001000 -#ifdef CONFIG_MPC8240 -#define PICR1_ADDRESS_MAP 0x00010000 -#define PIRC1_MSK 0xff000000 -#endif -#define PICR1_PROC_TYPE_MSK 0x00060000 -#define PICR1_PROC_TYPE_603E 0x00040000 -#define PICR1_RCS0 0x00100000 - -#define PICR2_CF_SNOOP_WS_MASK 0x000c0000 -#define PICR2_CF_SNOOP_WS_0WS 0x00000000 -#define PICR2_CF_SNOOP_WS_1WS 0x00040000 -#define PICR2_CF_SNOOP_WS_2WS 0x00080000 -#define PICR2_CF_SNOOP_WS_3WS 0x000c0000 -#define PICR2_CF_APHASE_WS_MASK 0x0000000c -#define PICR2_CF_APHASE_WS_0WS 0x00000000 -#define PICR2_CF_APHASE_WS_1WS 0x00000004 -#define PICR2_CF_APHASE_WS_2WS 0x00000008 -#define PICR2_CF_APHASE_WS_3WS 0x0000000c - -#define MCCR1_ROMNAL_SHIFT 28 -#define MCCR1_ROMNAL_MSK 0xf0000000 -#define MCCR1_ROMFAL_SHIFT 23 -#define MCCR1_ROMFAL_MSK 0x0f800000 -#define MCCR1_DBUS_SIZE0 0x00400000 -#define MCCR1_BURST 0x00100000 -#define MCCR1_MEMGO 0x00080000 -#define MCCR1_SREN 0x00040000 -#if defined(CONFIG_MPC8240) -#define MCCR1_RAM_TYPE 0x00020000 -#elif defined(CONFIG_MPC8245) || defined(CONFIG_MPC8241) -#define MCCR1_SDRAM_EN 0x00020000 -#else -#error Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240) -#endif -#define MCCR1_PCKEN 0x00010000 -#define MCCR1_BANK1ROW_SHIFT 2 -#define MCCR1_BANK2ROW_SHIFT 4 -#define MCCR1_BANK3ROW_SHIFT 6 -#define MCCR1_BANK4ROW_SHIFT 8 -#define MCCR1_BANK5ROW_SHIFT 10 -#define MCCR1_BANK6ROW_SHIFT 12 -#define MCCR1_BANK7ROW_SHIFT 14 - -#define MCCR2_TS_WAIT_TIMER_MSK 0xe0000000 -#define MCCR2_TS_WAIT_TIMER_SHIFT 29 -#define MCCR2_ASRISE_MSK 0x1e000000 -#define MCCR2_ASRISE_SHIFT 25 -#define MCCR2_ASFALL_MSK 0x01e00000 -#define MCCR2_ASFALL_SHIFT 21 - -#define MCCR2_INLINE_PAR_NOT_ECC 0x00100000 -#define MCCR2_WRITE_PARITY_CHK 0x00080000 -#define MCCR2_INLFRD_PARECC_CHK_EN 0x00040000 -#ifdef CONFIG_MPC8240 -#define MCCR2_ECC_EN 0x00020000 -#define MCCR2_EDO 0x00010000 -#endif -#define MCCR2_REFINT_MSK 0x0000fffc -#define MCCR2_REFINT_SHIFT 2 -#define MCCR2_RSV_PG 0x00000002 -#define MCCR2_PMW_PAR 0x00000001 - -#define MCCR3_BSTOPRE2TO5_MSK 0xf0000000 /*BSTOPRE[2-5]*/ -#define MCCR3_BSTOPRE2TO5_SHIFT 28 -#define MCCR3_REFREC_MSK 0x0f000000 -#define MCCR3_REFREC_SHIFT 24 -#ifdef CONFIG_MPC8240 -#define MCCR3_RDLAT_MSK 0x00f00000 -#define MCCR3_RDLAT_SHIFT 20 -#define MCCR3_CPX 0x00010000 -#define MCCR3_RAS6P_MSK 0x00078000 -#define MCCR3_RAS6P_SHIFT 15 -#define MCCR3_CAS5_MSK 0x00007000 -#define MCCR3_CAS5_SHIFT 12 -#define MCCR3_CP4_MSK 0x00000e00 -#define MCCR3_CP4_SHIFT 9 -#define MCCR3_CAS3_MSK 0x000001c0 -#define MCCR3_CAS3_SHIFT 6 -#define MCCR3_RCD2_MSK 0x00000038 -#define MCCR3_RCD2_SHIFT 3 -#define MCCR3_RP1_MSK 0x00000007 -#define MCCR3_RP1_SHIFT 0 -#endif - -#define MCCR4_PRETOACT_MSK 0xf0000000 -#define MCCR4_PRETOACT_SHIFT 28 -#define MCCR4_ACTTOPRE_MSK 0x0f000000 -#define MCCR4_ACTTOPRE_SHIFT 24 -#define MCCR4_WMODE 0x00800000 -#define MCCR4_INLINE 0x00400000 -#if defined(CONFIG_MPC8240) -#define MCCR4_BIT21 0x00200000 /* this include cos DINK code sets it- unknown function*/ -#elif defined(CONFIG_MPC8245) || defined(CONFIG_MPC8241) -#define MCCR4_EXTROM 0x00200000 /* enables Extended ROM space */ -#else -#error Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240) -#endif -#define MCCR4_REGISTERED 0x00100000 -#define MCCR4_BSTOPRE0TO1_MSK 0x000c0000 /*BSTOPRE[0-1]*/ -#define MCCR4_BSTOPRE0TO1_SHIFT 18 -#define MCCR4_REGDIMM 0x00008000 -#define MCCR4_SDMODE_MSK 0x00007f00 -#define MCCR4_SDMODE_SHIFT 8 -#define MCCR4_ACTTORW_MSK 0x000000f0 -#define MCCR4_ACTTORW_SHIFT 4 -#define MCCR4_BSTOPRE6TO9_MSK 0x0000000f /*BSTOPRE[6-9]*/ -#define MCCR4_BSTOPRE6TO9_SHIFT 0 -#define MCCR4_DBUS_SIZE2_SHIFT 17 - -#define MICR_ADDR_MASK 0x0ff00000 -#define MICR_ADDR_SHIFT 20 -#define MICR_EADDR_MASK 0x30000000 -#define MICR_EADDR_SHIFT 28 - -/*eumb and epic config*/ - -#define EPIC_FPR 0x00041000 -#define EPIC_GCR 0x00041020 -#define EPIC_EICR 0x00041030 -#define EPIC_EVI 0x00041080 -#define EPIC_PI 0x00041090 -#define EPIC_SVR 0x000410E0 -#define EPIC_TFRR 0x000410F0 - -/* - * Note the information for these is rather mangled in the 8240 manual. - * These are guesses. - */ - -#define EPIC_GTCCR0 0x00041100 -#define EPIC_GTCCR1 0x00041140 -#define EPIC_GTCCR2 0x00041180 -#define EPIC_GTCCR3 0x000411C0 -#define EPIC_GTBCR0 0x00041110 -#define EPIC_GTBCR1 0x00041150 -#define EPIC_GTBCR2 0x00041190 -#define EPIC_GTBCR3 0x000411D0 -#define EPIC_GTVPR0 0x00041120 -#define EPIC_GTVPR1 0x00041160 -#define EPIC_GTVPR2 0x000411a0 -#define EPIC_GTVPR3 0x000411e0 -#define EPIC_GTDR0 0x00041130 -#define EPIC_GTDR1 0x00041170 -#define EPIC_GTDR2 0x000411b0 -#define EPIC_GTDR3 0x000411f0 - -#define EPIC_IVPR0 0x00050200 -#define EPIC_IVPR1 0x00050220 -#define EPIC_IVPR2 0x00050240 -#define EPIC_IVPR3 0x00050260 -#define EPIC_IVPR4 0x00050280 - -#define EPIC_SVPR0 0x00050200 -#define EPIC_SVPR1 0x00050220 -#define EPIC_SVPR2 0x00050240 -#define EPIC_SVPR3 0x00050260 -#define EPIC_SVPR4 0x00050280 -#define EPIC_SVPR5 0x000502A0 -#define EPIC_SVPR6 0x000502C0 -#define EPIC_SVPR7 0x000502E0 -#define EPIC_SVPR8 0x00050300 -#define EPIC_SVPR9 0x00050320 -#define EPIC_SVPRa 0x00050340 -#define EPIC_SVPRb 0x00050360 -#define EPIC_SVPRc 0x00050380 -#define EPIC_SVPRd 0x000503A0 -#define EPIC_SVPRe 0x000503C0 -#define EPIC_SVPRf 0x000503E0 - -/* MPC8240 Byte Swap/PCI Support Macros */ -#define BYTE_SWAP_16_BIT(x) ( (((x) & 0x00ff) << 8) | ( (x) >> 8) ) -#define LONGSWAP(x) ((((x) & 0x000000ff) << 24) | (((x) & 0x0000ff00) << 8)|\ - (((x) & 0x00ff0000) >> 8) | (((x) & 0xff000000) >> 24) ) -#define PCISWAP(x) LONGSWAP(x) - -#ifndef __ASSEMBLY__ - -/* - * MPC107 Support - * - */ -unsigned int mpc824x_mpc107_getreg(unsigned int regNum); -void mpc824x_mpc107_setreg(unsigned int regNum, unsigned int regVal); -void mpc824x_mpc107_write8(unsigned int address, unsigned char data); -void mpc824x_mpc107_write16(unsigned int address, unsigned short data); -void mpc824x_mpc107_write32(unsigned int address, unsigned int data); -unsigned char mpc824x_mpc107_read8(unsigned int address); -unsigned short mpc824x_mpc107_read16(unsigned int address); -unsigned int mpc824x_mpc107_read32(unsigned int address); -unsigned int mpc824x_eummbar_read(unsigned int regNum); -void mpc824x_eummbar_write(unsigned int regNum, unsigned int regVal); - -#ifdef CONFIG_PCI -struct pci_controller; -void pci_cpm824x_init(struct pci_controller* hose); -#endif - -#endif /* __ASSEMBLY__ */ - -#endif /* __MPC824X_H__ */ diff --git a/include/pci.h b/include/pci.h index 216f4489e5..7f67ca6542 100644 --- a/include/pci.h +++ b/include/pci.h @@ -670,10 +670,6 @@ extern void board_pci_fixup_dev(struct pci_controller *hose, pci_dev_t dev, const char * pci_class_str(u8 class); int pci_last_busno(void); -#ifdef CONFIG_MPC824X -extern void pci_mpc824x_init (struct pci_controller *hose); -#endif - #ifdef CONFIG_MPC85xx extern void pci_mpc85xx_init (struct pci_controller *hose); #endif diff --git a/include/pcmcia/cirrus.h b/include/pcmcia/cirrus.h deleted file mode 100644 index cd34dd8560..0000000000 --- a/include/pcmcia/cirrus.h +++ /dev/null @@ -1,180 +0,0 @@ -/* - * cirrus.h 1.4 1999/10/25 20:03:34 - * - * The contents of this file are subject to the Mozilla Public License - * Version 1.1 (the "License"); you may not use this file except in - * compliance with the License. You may obtain a copy of the License - * at http://www.mozilla.org/MPL/ - * - * Software distributed under the License is distributed on an "AS IS" - * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See - * the License for the specific language governing rights and - * limitations under the License. - * - * The initial developer of the original code is David A. Hinds - * <dahinds@users.sourceforge.net>. Portions created by David A. Hinds - * are Copyright (C) 1999 David A. Hinds. All Rights Reserved. - * - * Alternatively, the contents of this file may be used under the - * terms of the GNU General Public License version 2 (the "GPL"), in which - * case the provisions of the GPL are applicable instead of the - * above. If you wish to allow the use of your version of this file - * only under the terms of the GPL and not to allow others to use - * your version of this file under the MPL, indicate your decision by - * deleting the provisions above and replace them with the notice and - * other provisions required by the GPL. If you do not delete the - * provisions above, a recipient may use your version of this file - * under either the MPL or the GPL. - */ - -#ifndef _LINUX_CIRRUS_H -#define _LINUX_CIRRUS_H - -#ifndef PCI_VENDOR_ID_CIRRUS -#define PCI_VENDOR_ID_CIRRUS 0x1013 -#endif -#ifndef PCI_DEVICE_ID_CIRRUS_6729 -#define PCI_DEVICE_ID_CIRRUS_6729 0x1100 -#endif -#ifndef PCI_DEVICE_ID_CIRRUS_6832 -#define PCI_DEVICE_ID_CIRRUS_6832 0x1110 -#endif - -#define PD67_MISC_CTL_1 0x16 /* Misc control 1 */ -#define PD67_FIFO_CTL 0x17 /* FIFO control */ -#define PD67_MISC_CTL_2 0x1E /* Misc control 2 */ -#define PD67_CHIP_INFO 0x1f /* Chip information */ -#define PD67_ATA_CTL 0x026 /* 6730: ATA control */ -#define PD67_EXT_INDEX 0x2e /* Extension index */ -#define PD67_EXT_DATA 0x2f /* Extension data */ - -/* PD6722 extension registers -- indexed in PD67_EXT_INDEX */ -#define PD67_DATA_MASK0 0x01 /* Data mask 0 */ -#define PD67_DATA_MASK1 0x02 /* Data mask 1 */ -#define PD67_DMA_CTL 0x03 /* DMA control */ - -/* PD6730 extension registers -- indexed in PD67_EXT_INDEX */ -#define PD67_EXT_CTL_1 0x03 /* Extension control 1 */ -#define PD67_MEM_PAGE(n) ((n)+5) /* PCI window bits 31:24 */ -#define PD67_EXTERN_DATA 0x0a -#define PD67_MISC_CTL_3 0x25 -#define PD67_SMB_PWR_CTL 0x26 - -/* I/O window address offset */ -#define PD67_IO_OFF(w) (0x36+((w)<<1)) - -/* Timing register sets */ -#define PD67_TIME_SETUP(n) (0x3a + 3*(n)) -#define PD67_TIME_CMD(n) (0x3b + 3*(n)) -#define PD67_TIME_RECOV(n) (0x3c + 3*(n)) - -/* Flags for PD67_MISC_CTL_1 */ -#define PD67_MC1_5V_DET 0x01 /* 5v detect */ -#define PD67_MC1_MEDIA_ENA 0x01 /* 6730: Multimedia enable */ -#define PD67_MC1_VCC_3V 0x02 /* 3.3v Vcc */ -#define PD67_MC1_PULSE_MGMT 0x04 -#define PD67_MC1_PULSE_IRQ 0x08 -#define PD67_MC1_SPKR_ENA 0x10 -#define PD67_MC1_INPACK_ENA 0x80 - -/* Flags for PD67_FIFO_CTL */ -#define PD67_FIFO_EMPTY 0x80 - -/* Flags for PD67_MISC_CTL_2 */ -#define PD67_MC2_FREQ_BYPASS 0x01 -#define PD67_MC2_DYNAMIC_MODE 0x02 -#define PD67_MC2_SUSPEND 0x04 -#define PD67_MC2_5V_CORE 0x08 -#define PD67_MC2_LED_ENA 0x10 /* IRQ 12 is LED enable */ -#define PD67_MC2_FAST_PCI 0x10 /* 6729: PCI bus > 25 MHz */ -#define PD67_MC2_3STATE_BIT7 0x20 /* Floppy change bit */ -#define PD67_MC2_DMA_MODE 0x40 -#define PD67_MC2_IRQ15_RI 0x80 /* IRQ 15 is ring enable */ - -/* Flags for PD67_CHIP_INFO */ -#define PD67_INFO_SLOTS 0x20 /* 0 = 1 slot, 1 = 2 slots */ -#define PD67_INFO_CHIP_ID 0xc0 -#define PD67_INFO_REV 0x1c - -/* Fields in PD67_TIME_* registers */ -#define PD67_TIME_SCALE 0xc0 -#define PD67_TIME_SCALE_1 0x00 -#define PD67_TIME_SCALE_16 0x40 -#define PD67_TIME_SCALE_256 0x80 -#define PD67_TIME_SCALE_4096 0xc0 -#define PD67_TIME_MULT 0x3f - -/* Fields in PD67_DMA_CTL */ -#define PD67_DMA_MODE 0xc0 -#define PD67_DMA_OFF 0x00 -#define PD67_DMA_DREQ_INPACK 0x40 -#define PD67_DMA_DREQ_WP 0x80 -#define PD67_DMA_DREQ_BVD2 0xc0 -#define PD67_DMA_PULLUP 0x20 /* Disable socket pullups? */ - -/* Fields in PD67_EXT_CTL_1 */ -#define PD67_EC1_VCC_PWR_LOCK 0x01 -#define PD67_EC1_AUTO_PWR_CLEAR 0x02 -#define PD67_EC1_LED_ENA 0x04 -#define PD67_EC1_INV_CARD_IRQ 0x08 -#define PD67_EC1_INV_MGMT_IRQ 0x10 -#define PD67_EC1_PULLUP_CTL 0x20 - -/* Fields in PD67_MISC_CTL_3 */ -#define PD67_MC3_IRQ_MASK 0x03 -#define PD67_MC3_IRQ_PCPCI 0x00 -#define PD67_MC3_IRQ_EXTERN 0x01 -#define PD67_MC3_IRQ_PCIWAY 0x02 -#define PD67_MC3_IRQ_PCI 0x03 -#define PD67_MC3_PWR_MASK 0x0c -#define PD67_MC3_PWR_SERIAL 0x00 -#define PD67_MC3_PWR_TI2202 0x08 -#define PD67_MC3_PWR_SMB 0x0c - -/* Register definitions for Cirrus PD6832 PCI-to-CardBus bridge */ - -/* PD6832 extension registers -- indexed in PD67_EXT_INDEX */ -#define PD68_EXT_CTL_2 0x0b -#define PD68_PCI_SPACE 0x22 -#define PD68_PCCARD_SPACE 0x23 -#define PD68_WINDOW_TYPE 0x24 -#define PD68_EXT_CSC 0x2e -#define PD68_MISC_CTL_4 0x2f -#define PD68_MISC_CTL_5 0x30 -#define PD68_MISC_CTL_6 0x31 - -/* Extra flags in PD67_MISC_CTL_3 */ -#define PD68_MC3_HW_SUSP 0x10 -#define PD68_MC3_MM_EXPAND 0x40 -#define PD68_MC3_MM_ARM 0x80 - -/* Bridge Control Register */ -#define PD6832_BCR_MGMT_IRQ_ENA 0x0800 - -/* Socket Number Register */ -#define PD6832_SOCKET_NUMBER 0x004c /* 8 bit */ - - -typedef struct cirrus_state_t { - u_char misc1, misc2; - u_char timer[6]; -} cirrus_state_t; - -/* Cirrus options */ -static int has_dma = -1; -static int has_led = -1; -static int has_ring = -1; -static int dynamic_mode = 0; -static int freq_bypass = -1; -#ifdef CONFIG_CPC45 -static int setup_time = 2; -static int cmd_time = 6; -static int recov_time = 1; -#else -static int setup_time = -1; -static int cmd_time = -1; -static int recov_time = -1; -#endif - - -#endif /* _LINUX_CIRRUS_H */ diff --git a/include/pcmcia/i82365.h b/include/pcmcia/i82365.h deleted file mode 100644 index 0b432a80ba..0000000000 --- a/include/pcmcia/i82365.h +++ /dev/null @@ -1,154 +0,0 @@ -/* - * i82365.h 1.21 2001/08/24 12:15:33 - * - * The contents of this file are subject to the Mozilla Public License - * Version 1.1 (the "License"); you may not use this file except in - * compliance with the License. You may obtain a copy of the License - * at http://www.mozilla.org/MPL/ - * - * Software distributed under the License is distributed on an "AS IS" - * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See - * the License for the specific language governing rights and - * limitations under the License. - * - * The initial developer of the original code is David A. Hinds - * <dahinds@users.sourceforge.net>. Portions created by David A. Hinds - * are Copyright (C) 1999 David A. Hinds. All Rights Reserved. - * - * Alternatively, the contents of this file may be used under the - * terms of the GNU General Public License version 2 (the "GPL"), in - * which case the provisions of the GPL are applicable instead of the - * above. If you wish to allow the use of your version of this file - * only under the terms of the GPL and not to allow others to use - * your version of this file under the MPL, indicate your decision by - * deleting the provisions above and replace them with the notice and - * other provisions required by the GPL. If you do not delete the - * provisions above, a recipient may use your version of this file - * under either the MPL or the GPL. - */ - -#ifndef _LINUX_I82365_H -#define _LINUX_I82365_H - -/* register definitions for the Intel 82365SL PCMCIA controller */ - -/* Offsets for PCIC registers */ -#define I365_IDENT 0x00 /* Identification and revision */ -#define I365_STATUS 0x01 /* Interface status */ -#define I365_POWER 0x02 /* Power and RESETDRV control */ -#define I365_INTCTL 0x03 /* Interrupt and general control */ -#define I365_CSC 0x04 /* Card status change */ -#define I365_CSCINT 0x05 /* Card status change interrupt control */ -#define I365_ADDRWIN 0x06 /* Address window enable */ -#define I365_IOCTL 0x07 /* I/O control */ -#define I365_GENCTL 0x16 /* Card detect and general control */ -#define I365_GBLCTL 0x1E /* Global control register */ - -/* Offsets for I/O and memory window registers */ -#define I365_IO(map) (0x08+((map)<<2)) -#define I365_MEM(map) (0x10+((map)<<3)) -#define I365_W_START 0 -#define I365_W_STOP 2 -#define I365_W_OFF 4 - -/* Flags for I365_STATUS */ -#define I365_CS_BVD1 0x01 -#define I365_CS_STSCHG 0x01 -#define I365_CS_BVD2 0x02 -#define I365_CS_SPKR 0x02 -#define I365_CS_DETECT 0x0C -#define I365_CS_WRPROT 0x10 -#define I365_CS_READY 0x20 /* Inverted */ -#define I365_CS_POWERON 0x40 -#define I365_CS_GPI 0x80 - -/* Flags for I365_POWER */ -#define I365_PWR_OFF 0x00 /* Turn off the socket */ -#define I365_PWR_OUT 0x80 /* Output enable */ -#define I365_PWR_NORESET 0x40 /* Disable RESETDRV on resume */ -#define I365_PWR_AUTO 0x20 /* Auto pwr switch enable */ -#define I365_VCC_MASK 0x18 /* Mask for turning off Vcc */ -/* There are different layouts for B-step and DF-step chips: the B - step has independent Vpp1/Vpp2 control, and the DF step has only - Vpp1 control, plus 3V control */ -#define I365_VCC_5V 0x10 /* Vcc = 5.0v */ -#define I365_VCC_3V 0x18 /* Vcc = 3.3v */ -#define I365_VPP2_MASK 0x0c /* Mask for turning off Vpp2 */ -#define I365_VPP2_5V 0x04 /* Vpp2 = 5.0v */ -#define I365_VPP2_12V 0x08 /* Vpp2 = 12.0v */ -#define I365_VPP1_MASK 0x03 /* Mask for turning off Vpp1 */ -#define I365_VPP1_5V 0x01 /* Vpp2 = 5.0v */ -#define I365_VPP1_12V 0x02 /* Vpp2 = 12.0v */ - -/* Flags for I365_INTCTL */ -#define I365_RING_ENA 0x80 -#define I365_PC_RESET 0x40 -#define I365_PC_IOCARD 0x20 -#define I365_INTR_ENA 0x10 -#define I365_IRQ_MASK 0x0F - -/* Flags for I365_CSC and I365_CSCINT*/ -#define I365_CSC_BVD1 0x01 -#define I365_CSC_STSCHG 0x01 -#define I365_CSC_BVD2 0x02 -#define I365_CSC_READY 0x04 -#define I365_CSC_DETECT 0x08 -#define I365_CSC_ANY 0x0F -#define I365_CSC_GPI 0x10 - -/* Flags for I365_ADDRWIN */ -#define I365_ADDR_MEMCS16 0x20 -#define I365_ENA_IO(map) (0x40 << (map)) -#define I365_ENA_MEM(map) (0x01 << (map)) - -/* Flags for I365_IOCTL */ -#define I365_IOCTL_MASK(map) (0x0F << (map<<2)) -#define I365_IOCTL_WAIT(map) (0x08 << (map<<2)) -#define I365_IOCTL_0WS(map) (0x04 << (map<<2)) -#define I365_IOCTL_IOCS16(map) (0x02 << (map<<2)) -#define I365_IOCTL_16BIT(map) (0x01 << (map<<2)) - -/* Flags for I365_GENCTL */ -#define I365_CTL_16DELAY 0x01 -#define I365_CTL_RESET 0x02 -#define I365_CTL_GPI_ENA 0x04 -#define I365_CTL_GPI_CTL 0x08 -#define I365_CTL_RESUME 0x10 -#define I365_CTL_SW_IRQ 0x20 - -/* Flags for I365_GBLCTL */ -#define I365_GBL_PWRDOWN 0x01 -#define I365_GBL_CSC_LEV 0x02 -#define I365_GBL_WRBACK 0x04 -#define I365_GBL_IRQ_0_LEV 0x08 -#define I365_GBL_IRQ_1_LEV 0x10 - -/* Flags for memory window registers */ -#define I365_MEM_16BIT 0x8000 /* In memory start high byte */ -#define I365_MEM_0WS 0x4000 -#define I365_MEM_WS1 0x8000 /* In memory stop high byte */ -#define I365_MEM_WS0 0x4000 -#define I365_MEM_WRPROT 0x8000 /* In offset high byte */ -#define I365_MEM_REG 0x4000 - -#define I365_REG(slot, reg) (((slot) << 6) | (reg)) - -/* Default ISA interrupt mask */ -#define I365_ISA_IRQ_MASK 0xdeb8 /* irq's 3-5,7,9-12,14,15 */ - -/* Device ID's for PCI-to-PCMCIA bridges */ - -#ifndef PCI_VENDOR_ID_INTEL -#define PCI_VENDOR_ID_INTEL 0x8086 -#endif -#ifndef PCI_DEVICE_ID_INTEL_82092AA_0 -#define PCI_DEVICE_ID_INTEL_82092AA_0 0x1221 -#endif -#ifndef PCI_VENDOR_ID_OMEGA -#define PCI_VENDOR_ID_OMEGA 0x119b -#endif -#ifndef PCI_DEVICE_ID_OMEGA_82C092G -#define PCI_DEVICE_ID_OMEGA_82C092G 0x1221 -#endif - -#endif /* _LINUX_I82365_H */ diff --git a/include/pcmcia/ss.h b/include/pcmcia/ss.h deleted file mode 100644 index aafae8a547..0000000000 --- a/include/pcmcia/ss.h +++ /dev/null @@ -1,133 +0,0 @@ -/* - * ss.h 1.31 2001/08/24 12:16:13 - * - * The contents of this file are subject to the Mozilla Public License - * Version 1.1 (the "License"); you may not use this file except in - * compliance with the License. You may obtain a copy of the License - * at http://www.mozilla.org/MPL/ - * - * Software distributed under the License is distributed on an "AS IS" - * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See - * the License for the specific language governing rights and - * limitations under the License. - * - * The initial developer of the original code is David A. Hinds - * <dahinds@users.sourceforge.net>. Portions created by David A. Hinds - * are Copyright (C) 1999 David A. Hinds. All Rights Reserved. - * - * Alternatively, the contents of this file may be used under the - * terms of the GNU General Public License version 2 (the "GPL"), in - * which case the provisions of the GPL are applicable instead of the - * above. If you wish to allow the use of your version of this file - * only under the terms of the GPL and not to allow others to use - * your version of this file under the MPL, indicate your decision by - * deleting the provisions above and replace them with the notice and - * other provisions required by the GPL. If you do not delete the - * provisions above, a recipient may use your version of this file - * under either the MPL or the GPL. - */ - -#ifndef _LINUX_SS_H -#define _LINUX_SS_H - -/* For RegisterCallback */ -typedef struct ss_callback_t { - void (*handler)(void *info, u_int events); - void *info; -} ss_callback_t; - -/* Definitions for card status flags for GetStatus */ -#define SS_WRPROT 0x0001 -#define SS_CARDLOCK 0x0002 -#define SS_EJECTION 0x0004 -#define SS_INSERTION 0x0008 -#define SS_BATDEAD 0x0010 -#define SS_BATWARN 0x0020 -#define SS_READY 0x0040 -#define SS_DETECT 0x0080 -#define SS_POWERON 0x0100 -#define SS_GPI 0x0200 -#define SS_STSCHG 0x0400 -#define SS_CARDBUS 0x0800 -#define SS_3VCARD 0x1000 -#define SS_XVCARD 0x2000 -#define SS_PENDING 0x4000 - -/* for InquireSocket */ -typedef struct socket_cap_t { - u_int features; - u_int irq_mask; - u_int map_size; - u_char pci_irq; - u_char cardbus; - struct pci_bus *cb_bus; - struct bus_operations *bus; -} socket_cap_t; - -/* InquireSocket capabilities */ -#define SS_CAP_PAGE_REGS 0x0001 -#define SS_CAP_VIRTUAL_BUS 0x0002 -#define SS_CAP_MEM_ALIGN 0x0004 -#define SS_CAP_STATIC_MAP 0x0008 -#define SS_CAP_PCCARD 0x4000 -#define SS_CAP_CARDBUS 0x8000 - -/* for GetSocket, SetSocket */ -typedef struct socket_state_t { - u_int flags; - u_int csc_mask; - u_char Vcc, Vpp; - u_char io_irq; -} socket_state_t; - -/* Socket configuration flags */ -#define SS_PWR_AUTO 0x0010 -#define SS_IOCARD 0x0020 -#define SS_RESET 0x0040 -#define SS_DMA_MODE 0x0080 -#define SS_SPKR_ENA 0x0100 -#define SS_OUTPUT_ENA 0x0200 -#define SS_ZVCARD 0x0400 - -/* Flags for I/O port and memory windows */ -#define MAP_ACTIVE 0x01 -#define MAP_16BIT 0x02 -#define MAP_AUTOSZ 0x04 -#define MAP_0WS 0x08 -#define MAP_WRPROT 0x10 -#define MAP_ATTRIB 0x20 -#define MAP_USE_WAIT 0x40 -#define MAP_PREFETCH 0x80 - -/* Use this just for bridge windows */ -#define MAP_IOSPACE 0x20 - -typedef struct pccard_io_map { - u_char map; - u_char flags; - u_short speed; - u_short start, stop; -} pccard_io_map; - -typedef struct pccard_mem_map { - u_char map; - u_char flags; - u_short speed; - u_long sys_start, sys_stop; - u_int card_start; -} pccard_mem_map; - -typedef struct cb_bridge_map { - u_char map; - u_char flags; - u_int start, stop; -} cb_bridge_map; - -enum ss_service { - SS_RegisterCallback, SS_InquireSocket, - SS_GetStatus, SS_GetSocket, SS_SetSocket, - SS_GetIOMap, SS_SetIOMap, SS_GetMemMap, SS_SetMemMap, - SS_GetBridge, SS_SetBridge, SS_ProcSetup -}; - -#endif /* _LINUX_SS_H */ diff --git a/include/pcmcia/ti113x.h b/include/pcmcia/ti113x.h deleted file mode 100644 index 5453588d0c..0000000000 --- a/include/pcmcia/ti113x.h +++ /dev/null @@ -1,234 +0,0 @@ -/* - * ti113x.h 1.31 2002/05/12 18:19:47 - * - * The contents of this file are subject to the Mozilla Public License - * Version 1.1 (the "License"); you may not use this file except in - * compliance with the License. You may obtain a copy of the License - * at http://www.mozilla.org/MPL/ - * - * Software distributed under the License is distributed on an "AS IS" - * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See - * the License for the specific language governing rights and - * limitations under the License. - * - * The initial developer of the original code is David A. Hinds - * <dahinds@users.sourceforge.net>. Portions created by David A. Hinds - * are Copyright (C) 1999 David A. Hinds. All Rights Reserved. - * - * Alternatively, the contents of this file may be used under the - * terms of the GNU General Public License version 2 (the "GPL"), in - * which case the provisions of the GPL are applicable instead of the - * above. If you wish to allow the use of your version of this file - * only under the terms of the GPL and not to allow others to use - * your version of this file under the MPL, indicate your decision by - * deleting the provisions above and replace them with the notice and - * other provisions required by the GPL. If you do not delete the - * provisions above, a recipient may use your version of this file - * under either the MPL or the GPL. - */ - -#ifndef _LINUX_TI113X_H -#define _LINUX_TI113X_H - -#ifndef PCI_VENDOR_ID_TI -#define PCI_VENDOR_ID_TI 0x104c -#endif - -#ifndef PCI_DEVICE_ID_TI_1130 -#define PCI_DEVICE_ID_TI_1130 0xac12 -#endif -#ifndef PCI_DEVICE_ID_TI_1031 -#define PCI_DEVICE_ID_TI_1031 0xac13 -#endif -#ifndef PCI_DEVICE_ID_TI_1131 -#define PCI_DEVICE_ID_TI_1131 0xac15 -#endif -#ifndef PCI_DEVICE_ID_TI_1210 -#define PCI_DEVICE_ID_TI_1210 0xac1a -#endif -#ifndef PCI_DEVICE_ID_TI_1211 -#define PCI_DEVICE_ID_TI_1211 0xac1e -#endif -#ifndef PCI_DEVICE_ID_TI_1220 -#define PCI_DEVICE_ID_TI_1220 0xac17 -#endif -#ifndef PCI_DEVICE_ID_TI_1221 -#define PCI_DEVICE_ID_TI_1221 0xac19 -#endif -#ifndef PCI_DEVICE_ID_TI_1250A -#define PCI_DEVICE_ID_TI_1250A 0xac16 -#endif -#ifndef PCI_DEVICE_ID_TI_1225 -#define PCI_DEVICE_ID_TI_1225 0xac1c -#endif -#ifndef PCI_DEVICE_ID_TI_1251A -#define PCI_DEVICE_ID_TI_1251A 0xac1d -#endif -#ifndef PCI_DEVICE_ID_TI_1251B -#define PCI_DEVICE_ID_TI_1251B 0xac1f -#endif -#ifndef PCI_DEVICE_ID_TI_1410 -#define PCI_DEVICE_ID_TI_1410 0xac50 -#endif -#ifndef PCI_DEVICE_ID_TI_1420 -#define PCI_DEVICE_ID_TI_1420 0xac51 -#endif -#ifndef PCI_DEVICE_ID_TI_1450 -#define PCI_DEVICE_ID_TI_1450 0xac1b -#endif -#ifndef PCI_DEVICE_ID_TI_1451 -#define PCI_DEVICE_ID_TI_1451 0xac52 -#endif -#ifndef PCI_DEVICE_ID_TI_1510 -#define PCI_DEVICE_ID_TI_1510 0xac56 -#endif -#ifndef PCI_DEVICE_ID_TI_4410 -#define PCI_DEVICE_ID_TI_4410 0xac41 -#endif -#ifndef PCI_DEVICE_ID_TI_4450 -#define PCI_DEVICE_ID_TI_4450 0xac40 -#endif -#ifndef PCI_DEVICE_ID_TI_4451 -#define PCI_DEVICE_ID_TI_4451 0xac42 -#endif - -/* Register definitions for TI 113X PCI-to-CardBus bridges */ - -/* System Control Register */ -#define TI113X_SYSTEM_CONTROL 0x80 /* 32 bit */ -#define TI113X_SCR_SMIROUTE 0x04000000 -#define TI113X_SCR_SMISTATUS 0x02000000 -#define TI113X_SCR_SMIENB 0x01000000 -#define TI113X_SCR_VCCPROT 0x00200000 -#define TI113X_SCR_REDUCEZV 0x00100000 -#define TI113X_SCR_CDREQEN 0x00080000 -#define TI113X_SCR_CDMACHAN 0x00070000 -#define TI113X_SCR_SOCACTIVE 0x00002000 -#define TI113X_SCR_PWRSTREAM 0x00000800 -#define TI113X_SCR_DELAYUP 0x00000400 -#define TI113X_SCR_DELAYDOWN 0x00000200 -#define TI113X_SCR_INTERROGATE 0x00000100 -#define TI113X_SCR_CLKRUN_SEL 0x00000080 -#define TI113X_SCR_PWRSAVINGS 0x00000040 -#define TI113X_SCR_SUBSYSRW 0x00000020 -#define TI113X_SCR_CB_DPAR 0x00000010 -#define TI113X_SCR_CDMA_EN 0x00000008 -#define TI113X_SCR_ASYNC_IRQ 0x00000004 -#define TI113X_SCR_KEEPCLK 0x00000002 -#define TI113X_SCR_CLKRUN_ENA 0x00000001 - -#define TI122X_SCR_SER_STEP 0xc0000000 -#define TI122X_SCR_INTRTIE 0x20000000 -#define TI122X_SCR_P2CCLK 0x08000000 -#define TI122X_SCR_CBRSVD 0x00400000 -#define TI122X_SCR_MRBURSTDN 0x00008000 -#define TI122X_SCR_MRBURSTUP 0x00004000 -#define TI122X_SCR_RIMUX 0x00000001 - -/* Multimedia Control Register */ -#define TI1250_MULTIMEDIA_CTL 0x84 /* 8 bit */ -#define TI1250_MMC_ZVOUTEN 0x80 -#define TI1250_MMC_PORTSEL 0x40 -#define TI1250_MMC_ZVEN1 0x02 -#define TI1250_MMC_ZVEN0 0x01 - -#define TI1250_GENERAL_STATUS 0x85 /* 8 bit */ -#define TI1250_GPIO0_CONTROL 0x88 /* 8 bit */ -#define TI1250_GPIO1_CONTROL 0x89 /* 8 bit */ -#define TI1250_GPIO2_CONTROL 0x8a /* 8 bit */ -#define TI1250_GPIO3_CONTROL 0x8b /* 8 bit */ -#define TI12XX_IRQMUX 0x8c /* 32 bit */ - -/* Retry Status Register */ -#define TI113X_RETRY_STATUS 0x90 /* 8 bit */ -#define TI113X_RSR_PCIRETRY 0x80 -#define TI113X_RSR_CBRETRY 0x40 -#define TI113X_RSR_TEXP_CBB 0x20 -#define TI113X_RSR_MEXP_CBB 0x10 -#define TI113X_RSR_TEXP_CBA 0x08 -#define TI113X_RSR_MEXP_CBA 0x04 -#define TI113X_RSR_TEXP_PCI 0x02 -#define TI113X_RSR_MEXP_PCI 0x01 - -/* Card Control Register */ -#define TI113X_CARD_CONTROL 0x91 /* 8 bit */ -#define TI113X_CCR_RIENB 0x80 -#define TI113X_CCR_ZVENABLE 0x40 -#define TI113X_CCR_PCI_IRQ_ENA 0x20 -#define TI113X_CCR_PCI_IREQ 0x10 -#define TI113X_CCR_PCI_CSC 0x08 -#define TI113X_CCR_SPKROUTEN 0x02 -#define TI113X_CCR_IFG 0x01 - -#define TI1220_CCR_PORT_SEL 0x20 -#define TI122X_CCR_AUD2MUX 0x04 - -/* Device Control Register */ -#define TI113X_DEVICE_CONTROL 0x92 /* 8 bit */ -#define TI113X_DCR_5V_FORCE 0x40 -#define TI113X_DCR_3V_FORCE 0x20 -#define TI113X_DCR_IMODE_MASK 0x06 -#define TI113X_DCR_IMODE_ISA 0x02 -#define TI113X_DCR_IMODE_SERIAL 0x04 - -#define TI12XX_DCR_IMODE_PCI_ONLY 0x00 -#define TI12XX_DCR_IMODE_ALL_SERIAL 0x06 - -/* Buffer Control Register */ -#define TI113X_BUFFER_CONTROL 0x93 /* 8 bit */ -#define TI113X_BCR_CB_READ_DEPTH 0x08 -#define TI113X_BCR_CB_WRITE_DEPTH 0x04 -#define TI113X_BCR_PCI_READ_DEPTH 0x02 -#define TI113X_BCR_PCI_WRITE_DEPTH 0x01 - -/* Diagnostic Register */ -#define TI1250_DIAGNOSTIC 0x93 /* 8 bit */ -#define TI1250_DIAG_TRUE_VALUE 0x80 -#define TI1250_DIAG_PCI_IREQ 0x40 -#define TI1250_DIAG_PCI_CSC 0x20 -#define TI1250_DIAG_ASYNC_CSC 0x01 - -/* DMA Registers */ -#define TI113X_DMA_0 0x94 /* 32 bit */ -#define TI113X_DMA_1 0x98 /* 32 bit */ - -/* ExCA IO offset registers */ -#define TI113X_IO_OFFSET(map) (0x36+((map)<<1)) - -/* Data structure for tracking vendor-specific state */ -typedef struct ti113x_state_t { - u32 sysctl; /* TI113X_SYSTEM_CONTROL */ - u8 cardctl; /* TI113X_CARD_CONTROL */ - u8 devctl; /* TI113X_DEVICE_CONTROL */ - u8 diag; /* TI1250_DIAGNOSTIC */ - u32 irqmux; /* TI12XX_IRQMUX */ -} ti113x_state_t; - -#define TI_PCIC_ID \ - IS_TI1130, IS_TI1131, IS_TI1031, IS_TI1210, IS_TI1211, \ - IS_TI1220, IS_TI1221, IS_TI1225, IS_TI1250A, IS_TI1251A, \ - IS_TI1251B, IS_TI1410, IS_TI1420, IS_TI1450, IS_TI1451, \ - IS_TI1510, IS_TI4410, IS_TI4450, IS_TI4451 - -#define TI_PCIC_INFO \ - { "TI 1130", IS_TI|IS_CARDBUS, ID(TI, 1130) }, \ - { "TI 1131", IS_TI|IS_CARDBUS, ID(TI, 1131) }, \ - { "TI 1031", IS_TI|IS_CARDBUS, ID(TI, 1031) }, \ - { "TI 1210", IS_TI|IS_CARDBUS, ID(TI, 1210) }, \ - { "TI 1211", IS_TI|IS_CARDBUS, ID(TI, 1211) }, \ - { "TI 1220", IS_TI|IS_CARDBUS, ID(TI, 1220) }, \ - { "TI 1221", IS_TI|IS_CARDBUS, ID(TI, 1221) }, \ - { "TI 1225", IS_TI|IS_CARDBUS, ID(TI, 1225) }, \ - { "TI 1250A", IS_TI|IS_CARDBUS, ID(TI, 1250A) }, \ - { "TI 1251A", IS_TI|IS_CARDBUS, ID(TI, 1251A) }, \ - { "TI 1251B", IS_TI|IS_CARDBUS, ID(TI, 1251B) }, \ - { "TI 1410", IS_TI|IS_CARDBUS, ID(TI, 1410) }, \ - { "TI 1420", IS_TI|IS_CARDBUS, ID(TI, 1420) }, \ - { "TI 1450", IS_TI|IS_CARDBUS, ID(TI, 1450) }, \ - { "TI 1451", IS_TI|IS_CARDBUS, ID(TI, 1451) }, \ - { "TI 1510", IS_TI|IS_CARDBUS, ID(TI, 1510) }, \ - { "TI 4410", IS_TI|IS_CARDBUS, ID(TI, 4410) }, \ - { "TI 4450", IS_TI|IS_CARDBUS, ID(TI, 4450) }, \ - { "TI 4451", IS_TI|IS_CARDBUS, ID(TI, 4451) } - -#endif /* _LINUX_TI113X_H */ diff --git a/include/ppc_asm.tmpl b/include/ppc_asm.tmpl index 5fcef9cebb..36d5975584 100644 --- a/include/ppc_asm.tmpl +++ b/include/ppc_asm.tmpl @@ -80,7 +80,7 @@ #define r31 31 -#if defined(CONFIG_8xx) || defined(CONFIG_MPC824X) +#if defined(CONFIG_8xx) /* Some special registers */ @@ -92,7 +92,7 @@ #define LCTRL2 157 /* Load/Store Support (37-41) */ #define ICTRL 158 -#endif /* CONFIG_8xx, CONFIG_MPC824X */ +#endif /* CONFIG_8xx */ #if defined(CONFIG_5xx) |
