diff options
Diffstat (limited to 'drivers/net/npe/include/IxEthDBMessages_p.h')
| -rw-r--r-- | drivers/net/npe/include/IxEthDBMessages_p.h | 234 |
1 files changed, 0 insertions, 234 deletions
diff --git a/drivers/net/npe/include/IxEthDBMessages_p.h b/drivers/net/npe/include/IxEthDBMessages_p.h deleted file mode 100644 index 5907fd59e2..0000000000 --- a/drivers/net/npe/include/IxEthDBMessages_p.h +++ /dev/null @@ -1,234 +0,0 @@ -/** - * @file IxEthDBMessages_p.h - * - * @brief Definitions of NPE messages - * - * @par - * IXP400 SW Release version 2.0 - * - * -- Copyright Notice -- - * - * @par - * Copyright 2001-2005, Intel Corporation. - * All rights reserved. - * - * @par - * SPDX-License-Identifier: BSD-3-Clause - * @par - * -- End of Copyright Notice -- - */ - -#ifndef IxEthDBMessages_p_H -#define IxEthDBMessages_p_H - -#include <IxEthNpe.h> -#include <IxOsCacheMMU.h> -#include "IxEthDB_p.h" - -/* events watched by the Eth event processor */ -#define IX_ETH_DB_MIN_EVENT_ID (IX_ETHNPE_EDB_GETMACADDRESSDATABASE) -#define IX_ETH_DB_MAX_EVENT_ID (IX_ETHNPE_PC_SETAPMACTABLE) - -/* macros to fill and extract data from NPE messages - place any endian conversions here */ -#define RESET_ELT_MESSAGE(message) { memset((void *) &(message), 0, sizeof((message))); } -#define NPE_MSG_ID(msg) ((msg).data[0] >> 24) - -#define FILL_SETPORTVLANTABLEENTRY_MSG(message, portID, setOffset, vlanMembershipSet, ttiSet) \ - do { \ - message.data[0] = (IX_ETHNPE_VLAN_SETPORTVLANTABLEENTRY << 24) | (portID << 16) | (setOffset * 2); \ - message.data[1] = (vlanMembershipSet << 8) | ttiSet; \ - } while (0); - -#define FILL_SETPORTVLANTABLERANGE_MSG(message, portID, offset, length, zone) \ - do { \ - message.data[0] = IX_ETHNPE_VLAN_SETPORTVLANTABLERANGE << 24 | portID << 16 | offset << 9 | length << 1; \ - message.data[1] = (UINT32) zone; \ - } while (0); - -#define FILL_SETDEFAULTRXVID_MSG(message, portID, tpid, vlanTag) \ - do { \ - message.data[0] = (IX_ETHNPE_VLAN_SETDEFAULTRXVID << 24) \ - | (portID << 16); \ - \ - message.data[1] = (tpid << 16) | vlanTag; \ - } while (0); - -#define FILL_SETRXTAGMODE_MSG(message, portID, filterMode, tagMode) \ - do { \ - message.data[0] = IX_ETHNPE_VLAN_SETRXTAGMODE << 24 \ - | portID << 16 \ - | filterMode << 2 \ - | tagMode; \ - \ - message.data[1] = 0; \ - } while (0); - -#define FILL_SETRXQOSENTRY(message, portID, classIndex, trafficClass, aqmQueue) \ - do { \ - message.data[0] = IX_ETHNPE_VLAN_SETRXQOSENTRY << 24 \ - | portID << 16 \ - | classIndex; \ - \ - message.data[1] = trafficClass << 24 \ - | 0x1 << 23 \ - | aqmQueue << 16 \ - | aqmQueue << 4; \ - } while (0); - -#define FILL_SETPORTIDEXTRACTIONMODE(message, portID, enable) \ - do { \ - message.data[0] = IX_ETHNPE_VLAN_SETPORTIDEXTRACTIONMODE << 24 \ - | portID << 16 \ - | (enable ? 0x1 : 0x0); \ - \ - message.data[1] = 0; \ - } while (0); - - -#define FILL_SETBLOCKINGSTATE_MSG(message, portID, blocked) \ - do { \ - message.data[0] = IX_ETHNPE_STP_SETBLOCKINGSTATE << 24 \ - | portID << 16 \ - | (blocked ? 0x1 : 0x0); \ - \ - message.data[1] = 0; \ - } while (0); - -#define FILL_SETBBSID_MSG(message, portID, bbsid) \ - do { \ - message.data[0] = IX_ETHNPE_PC_SETBBSID << 24 \ - | portID << 16 \ - | bbsid->macAddress[0] << 8 \ - | bbsid->macAddress[1]; \ - \ - message.data[1] = bbsid->macAddress[2] << 24 \ - | bbsid->macAddress[3] << 16 \ - | bbsid->macAddress[4] << 8 \ - | bbsid->macAddress[5]; \ - } while (0); - -#define FILL_SETFRAMECONTROLDURATIONID(message, portID, frameControlDurationID) \ - do { \ - message.data[0] = (IX_ETHNPE_PC_SETFRAMECONTROLDURATIONID << 24) | (portID << 16); \ - message.data[1] = frameControlDurationID; \ - } while (0); - -#define FILL_SETAPMACTABLE_MSG(message, zone) \ - do { \ - message.data[0] = IX_ETHNPE_PC_SETAPMACTABLE << 24 \ - | 0 << 8 /* always use index 0 */ \ - | 64; /* 32 entries, 8 bytes each, 4 bytes in a word */ \ - message.data[1] = (UINT32) zone; \ - } while (0); - -#define FILL_SETFIREWALLMODE_MSG(message, portID, epDelta, mode, address) \ - do { \ - message.data[0] = IX_ETHNPE_FW_SETFIREWALLMODE << 24 \ - | portID << 16 \ - | (epDelta & 0xFF) << 8 \ - | mode; \ - \ - message.data[1] = (UINT32) address; \ - } while (0); - -#define FILL_SETMACADDRESSDATABASE_MSG(message, portID, epDelta, blockCount, address) \ - do { \ - message.data[0] = IX_ETHNPE_EDB_SETMACADDRESSSDATABASE << 24 \ - | (epDelta & 0xFF) << 8 \ - | (blockCount & 0xFF); \ - \ - message.data[1] = (UINT32) address; \ - } while (0); - -#define FILL_GETMACADDRESSDATABASE(message, npeId, zone) \ - do { \ - message.data[0] = IX_ETHNPE_EDB_GETMACADDRESSDATABASE << 24; \ - message.data[1] = (UINT32) zone; \ - } while (0); - -#define FILL_SETMAXFRAMELENGTHS_MSG(message, portID, maxRxFrameSize, maxTxFrameSize) \ - do { \ - message.data[0] = IX_ETHNPE_SETMAXFRAMELENGTHS << 24 \ - | portID << 16 \ - | ((maxRxFrameSize + 63) / 64) << 8 /* max Rx 64-byte blocks */ \ - | (maxTxFrameSize + 63) / 64; /* max Tx 64-byte blocks */ \ - \ - message.data[1] = maxRxFrameSize << 16 | maxTxFrameSize; \ - } while (0); - -#define FILL_SETPORTADDRESS_MSG(message, portID, macAddress) \ - do { \ - message.data[0] = IX_ETHNPE_EDB_SETPORTADDRESS << 24 \ - | portID << 16 \ - | macAddress[0] << 8 \ - | macAddress[1]; \ - \ - message.data[1] = macAddress[2] << 24 \ - | macAddress[3] << 16 \ - | macAddress[4] << 8 \ - | macAddress[5]; \ - } while (0); - -/* access to a MAC node in the NPE tree */ -#define NPE_NODE_BYTE(eltNodeAddr, offset) (((UINT8 *) (eltNodeAddr))[offset]) - -/* browsing of the implicit linear binary tree structure of the NPE tree */ -#define LEFT_CHILD_OFFSET(offset) ((offset) << 1) -#define RIGHT_CHILD_OFFSET(offset) (((offset) << 1) + 1) - -#define IX_EDB_FLAGS_ACTIVE (0x2) -#define IX_EDB_FLAGS_VALID (0x1) -#define IX_EDB_FLAGS_RESERVED (0xfc) -#define IX_EDB_FLAGS_INACTIVE_VALID (0x1) - -#define IX_EDB_NPE_NODE_ELT_PORT_ID_OFFSET (6) -#define IX_EDB_NPE_NODE_ELT_FLAGS_OFFSET (7) -#define IX_EDB_NPE_NODE_WIFI_INDEX_OFFSET (6) -#define IX_EDB_NPE_NODE_WIFI_FLAGS_OFFSET (7) -#define IX_EDB_NPE_NODE_FW_FLAGS_OFFSET (1) -#define IX_EDB_NPE_NODE_FW_RESERVED_OFFSET (6) -#define IX_EDB_NPE_NODE_FW_ADDR_OFFSET (2) - -#define IX_EDB_NPE_NODE_VALID(address) ((NPE_NODE_BYTE(address, IX_EDB_NPE_NODE_ELT_FLAGS_OFFSET) & IX_EDB_FLAGS_VALID) != 0) -#define IX_EDB_NPE_NODE_ACTIVE(address) ((NPE_NODE_BYTE(address, IX_EDB_NPE_NODE_ELT_FLAGS_OFFSET) & IX_EDB_FLAGS_ACTIVE) != 0) -#define IX_EDB_NPE_NODE_PORT_ID(address) (NPE_NODE_BYTE(address, IX_EDB_NPE_NODE_ELT_PORT_ID_OFFSET)) - -/* macros to send messages to the NPEs */ -#define IX_ETHDB_ASYNC_SEND_NPE_MSG(npeId, msg, result) \ - do { \ - result = ixNpeMhMessageSend(npeId, msg, IX_NPEMH_SEND_RETRIES_DEFAULT); \ - \ - if (result != IX_SUCCESS) \ - { \ - ERROR_LOG("DB: Failed to send NPE message\n"); \ - } \ - } while (0); - -#define IX_ETHDB_SYNC_SEND_NPE_MSG(npeId, msg, result) \ - do { \ - result = ixNpeMhMessageWithResponseSend(npeId, msg, msg.data[0] >> 24, ixEthDBNpeMsgAck, IX_NPEMH_SEND_RETRIES_DEFAULT); \ - \ - if (result == IX_SUCCESS) \ - { \ - result = ixOsalMutexLock(&ixEthDBPortInfo[IX_ETH_DB_NPE_TO_PORT_ID(npeId)].npeAckLock, IX_ETH_DB_NPE_TIMEOUT); \ - \ - if (result != IX_SUCCESS) \ - { \ - ERROR_LOG("DB: NPE failed to respond within %dms\n", IX_ETH_DB_NPE_TIMEOUT); \ - } \ - } \ - else \ - { \ - ERROR_LOG("DB: Failed to send NPE message\n"); \ - } \ - } while (0); - -#ifndef IX_NDEBUG -#define IX_ETH_DB_NPE_MSG_HISTORY_DEPTH (100) -extern IX_ETH_DB_PUBLIC UINT32 npeMsgHistory[IX_ETH_DB_NPE_MSG_HISTORY_DEPTH][2]; -extern IX_ETH_DB_PUBLIC UINT32 npeMsgHistoryLen; -#endif - -#define IX_ETHDB_SEND_NPE_MSG(npeId, msg, result) { LOG_NPE_MSG(msg); IX_ETHDB_SYNC_SEND_NPE_MSG(npeId, msg, result); } - -#endif /* IxEthDBMessages_p_H */ |
