diff options
Diffstat (limited to 'cpu/blackfin/serial.h')
| -rw-r--r-- | cpu/blackfin/serial.h | 121 |
1 files changed, 65 insertions, 56 deletions
diff --git a/cpu/blackfin/serial.h b/cpu/blackfin/serial.h index 6cbc564b53..5f9be8622d 100644 --- a/cpu/blackfin/serial.h +++ b/cpu/blackfin/serial.h @@ -24,71 +24,80 @@ # define BFIN_DEBUG_EARLY_SERIAL 0 #endif +#ifndef __ASSEMBLY__ + #define LOB(x) ((x) & 0xFF) #define HIB(x) (((x) >> 8) & 0xFF) +/* + * All Blackfin system MMRs are padded to 32bits even if the register + * itself is only 16bits. So use a helper macro to streamline this. + */ +#define __BFP(m) u16 m; u16 __pad_##m +struct bfin_mmr_serial { +#ifdef __ADSPBF54x__ + __BFP(dll); + __BFP(dlh); + __BFP(gctl); + __BFP(lcr); + __BFP(mcr); + __BFP(lsr); + __BFP(msr); + __BFP(scr); + __BFP(ier_set); + __BFP(ier_clear); + __BFP(thr); + __BFP(rbr); +#else + union { + u16 dll; + u16 thr; + const u16 rbr; + }; + const u16 __spad0; + union { + u16 dlh; + u16 ier; + }; + const u16 __spad1; + const __BFP(iir); + __BFP(lcr); + __BFP(mcr); + __BFP(lsr); + __BFP(msr); + __BFP(scr); + const u32 __spad2; + __BFP(gctl); +#endif +}; +#undef __BFP + #ifndef UART_LSR # if (CONFIG_UART_CONSOLE == 3) -# define pUART_DLH pUART3_DLH -# define pUART_DLL pUART3_DLL -# define pUART_GCTL pUART3_GCTL -# define pUART_IER pUART3_IER -# define pUART_IERC pUART3_IER_CLEAR -# define pUART_LCR pUART3_LCR -# define pUART_LSR pUART3_LSR -# define pUART_RBR pUART3_RBR -# define pUART_THR pUART3_THR -# define UART_THR UART3_THR -# define UART_LSR UART3_LSR +# define UART_BASE UART3_DLL # elif (CONFIG_UART_CONSOLE == 2) -# define pUART_DLH pUART2_DLH -# define pUART_DLL pUART2_DLL -# define pUART_GCTL pUART2_GCTL -# define pUART_IER pUART2_IER -# define pUART_IERC pUART2_IER_CLEAR -# define pUART_LCR pUART2_LCR -# define pUART_LSR pUART2_LSR -# define pUART_RBR pUART2_RBR -# define pUART_THR pUART2_THR -# define UART_THR UART2_THR -# define UART_LSR UART2_LSR +# define UART_BASE UART2_DLL # elif (CONFIG_UART_CONSOLE == 1) -# define pUART_DLH pUART1_DLH -# define pUART_DLL pUART1_DLL -# define pUART_GCTL pUART1_GCTL -# define pUART_IER pUART1_IER -# define pUART_IERC pUART1_IER_CLEAR -# define pUART_LCR pUART1_LCR -# define pUART_LSR pUART1_LSR -# define pUART_RBR pUART1_RBR -# define pUART_THR pUART1_THR -# define UART_THR UART1_THR -# define UART_LSR UART1_LSR +# define UART_BASE UART1_DLL # elif (CONFIG_UART_CONSOLE == 0) -# define pUART_DLH pUART0_DLH -# define pUART_DLL pUART0_DLL -# define pUART_GCTL pUART0_GCTL -# define pUART_IER pUART0_IER -# define pUART_IERC pUART0_IER_CLEAR -# define pUART_LCR pUART0_LCR -# define pUART_LSR pUART0_LSR -# define pUART_RBR pUART0_RBR -# define pUART_THR pUART0_THR -# define UART_THR UART0_THR -# define UART_LSR UART0_LSR +# define UART_BASE UART0_DLL +# endif +#else +# if CONFIG_UART_CONSOLE != 0 +# error CONFIG_UART_CONSOLE must be 0 on parts with only one UART # endif +# define UART_BASE UART_DLL #endif - -#ifndef __ASSEMBLY__ +#define pUART ((volatile struct bfin_mmr_serial *)UART_BASE) #ifdef __ADSPBF54x__ # define ACCESS_LATCH() # define ACCESS_PORT_IER() -# define CLEAR_IER() (*pUART_IERC = 0) #else -# define ACCESS_LATCH() (*pUART_LCR |= DLAB) -# define ACCESS_PORT_IER() (*pUART_LCR &= ~DLAB) -# define CLEAR_IER() (*pUART_IER = 0) +# define ACCESS_LATCH() \ + bfin_write16(&pUART->lcr, bfin_read16(&pUART->lcr) | DLAB) +# define ACCESS_PORT_IER() \ + bfin_write16(&pUART->lcr, bfin_read16(&pUART->lcr) & ~DLAB) #endif __attribute__((always_inline)) @@ -142,10 +151,10 @@ static inline void serial_early_init(void) serial_do_portmux(); /* always enable UART -- avoids anomalies 05000309 and 05000350 */ - *pUART_GCTL = UCEN; + bfin_write16(&pUART->gctl, UCEN); /* Set LCR to Word Lengh 8-bit word select */ - *pUART_LCR = WLS_8; + bfin_write16(&pUART->lcr, WLS_8); SSYNC(); } @@ -158,8 +167,8 @@ static inline void serial_early_put_div(uint16_t divisor) SSYNC(); /* Program the divisor to get the baud rate we want */ - *pUART_DLL = LOB(divisor); - *pUART_DLH = HIB(divisor); + bfin_write16(&pUART->dll, LOB(divisor)); + bfin_write16(&pUART->dlh, HIB(divisor)); SSYNC(); /* Clear DLAB in LCR to Access THR RBR IER */ @@ -174,8 +183,8 @@ static inline uint16_t serial_early_get_div(void) ACCESS_LATCH(); SSYNC(); - uint8_t dll = *pUART_DLL; - uint8_t dlh = *pUART_DLH; + uint8_t dll = bfin_read16(&pUART->dll); + uint8_t dlh = bfin_read16(&pUART->dlh); uint16_t divisor = (dlh << 8) | dll; /* Clear DLAB in LCR to Access THR RBR IER */ |
