diff options
Diffstat (limited to 'board/funkwerk/vovpn-gw/m88e6060.c')
| -rw-r--r-- | board/funkwerk/vovpn-gw/m88e6060.c | 262 |
1 files changed, 262 insertions, 0 deletions
diff --git a/board/funkwerk/vovpn-gw/m88e6060.c b/board/funkwerk/vovpn-gw/m88e6060.c new file mode 100644 index 0000000000..e4ff3c37c5 --- /dev/null +++ b/board/funkwerk/vovpn-gw/m88e6060.c @@ -0,0 +1,262 @@ +/* + * (C) Copyright 2004 + * Elmeg Communications Systems GmbH, Juergen Selent (j.selent@elmeg.de) + * + * Support for the Elmeg VoVPN Gateway Module + * ------------------------------------------ + * Initialize Marvell M88E6060 Switch + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <ioports.h> +#include <mpc8260.h> +#include <asm/m8260_pci.h> +#include <net.h> +#include <miiphy.h> + +#include "m88e6060.h" + +#if (CONFIG_COMMANDS & CFG_CMD_NET) +static int prtTab[M88X_PRT_CNT] = { 8, 9, 10, 11, 12, 13 }; +static int phyTab[M88X_PHY_CNT] = { 0, 1, 2, 3, 4 }; + +static m88x_regCfg_t prtCfg0[] = { + { 4, 0x3e7c, 0x8000 }, + { 4, 0x3e7c, 0x8003 }, + { 6, 0x0fc0, 0x001e }, + { -1, 0xffff, 0x0000 } +}; + +static m88x_regCfg_t prtCfg1[] = { + { 4, 0x3e7c, 0x8000 }, + { 4, 0x3e7c, 0x8003 }, + { 6, 0x0fc0, 0x001d }, + { -1, 0xffff, 0x0000 } +}; + +static m88x_regCfg_t prtCfg2[] = { + { 4, 0x3e7c, 0x8000 }, + { 4, 0x3e7c, 0x8003 }, + { 6, 0x0fc0, 0x001b }, + { -1, 0xffff, 0x0000 } +}; + +static m88x_regCfg_t prtCfg3[] = { + { 4, 0x3e7c, 0x8000 }, + { 4, 0x3e7c, 0x8003 }, + { 6, 0x0fc0, 0x0017 }, + { -1, 0xffff, 0x0000 } +}; + +static m88x_regCfg_t prtCfg4[] = { + { 4, 0x3e7c, 0x8000 }, + { 4, 0x3e7c, 0x8003 }, + { 6, 0x0fc0, 0x000f }, + { -1, 0xffff, 0x0000 } +}; + +static m88x_regCfg_t *prtCfg[M88X_PRT_CNT] = { + prtCfg0,prtCfg1,prtCfg2,prtCfg3,prtCfg4,NULL +}; + +static m88x_regCfg_t phyCfgX[] = { + { 4, 0xfa1f, 0x01e0 }, + { 0, 0x213f, 0x1200 }, + { 24, 0x81ff, 0x1200 }, + { -1, 0xffff, 0x0000 } +}; + +static m88x_regCfg_t *phyCfg[M88X_PHY_CNT] = { + phyCfgX,phyCfgX,phyCfgX,phyCfgX,NULL +}; + +#if 0 +static void +m88e6060_dump( int devAddr ) +{ + int i, j; + unsigned short val[6]; + + printf( "M88E6060 Register Dump\n" ); + printf( "====================================\n" ); + printf( "PortNo 0 1 2 3 4 5\n" ); + for (i=0; i<6; i++) + miiphy_read( devAddr+prtTab[i],M88X_PRT_STAT,&val[i] ); + printf( "STAT %04hx %04hx %04hx %04hx %04hx %04hx\n", + val[0],val[1],val[2],val[3],val[4],val[5] ); + + for (i=0; i<6; i++) + miiphy_read( devAddr+prtTab[i],M88X_PRT_ID,&val[i] ); + printf( "ID %04hx %04hx %04hx %04hx %04hx %04hx\n", + val[0],val[1],val[2],val[3],val[4],val[5] ); + + for (i=0; i<6; i++) + miiphy_read( devAddr+prtTab[i],M88X_PRT_CNTL,&val[i] ); + printf( "CNTL %04hx %04hx %04hx %04hx %04hx %04hx\n", + val[0],val[1],val[2],val[3],val[4],val[5] ); + + for (i=0; i<6; i++) + miiphy_read( devAddr+prtTab[i],M88X_PRT_VLAN,&val[i] ); + printf( "VLAN %04hx %04hx %04hx %04hx %04hx %04hx\n", + val[0],val[1],val[2],val[3],val[4],val[5] ); + + for (i=0; i<6; i++) + miiphy_read( devAddr+prtTab[i],M88X_PRT_PAV,&val[i] ); + printf( "PAV %04hx %04hx %04hx %04hx %04hx %04hx\n", + val[0],val[1],val[2],val[3],val[4],val[5] ); + + for (i=0; i<6; i++) + miiphy_read( devAddr+prtTab[i],M88X_PRT_RX,&val[i] ); + printf( "RX %04hx %04hx %04hx %04hx %04hx %04hx\n", + val[0],val[1],val[2],val[3],val[4],val[5] ); + + for (i=0; i<6; i++) + miiphy_read( devAddr+prtTab[i],M88X_PRT_TX,&val[i] ); + printf( "TX %04hx %04hx %04hx %04hx %04hx %04hx\n", + val[0],val[1],val[2],val[3],val[4],val[5] ); + + printf( "------------------------------------\n" ); + printf( "PhyNo 0 1 2 3 4\n" ); + for (i=0; i<9; i++) { + for (j=0; j<5; j++) { + miiphy_read( devAddr+phyTab[j],i,&val[j] ); + } + printf( "0x%02x %04hx %04hx %04hx %04hx %04hx\n", + i,val[0],val[1],val[2],val[3],val[4] ); + } + for (i=0x10; i<0x1d; i++) { + for (j=0; j<5; j++) { + miiphy_read( devAddr+phyTab[j],i,&val[j] ); + } + printf( "0x%02x %04hx %04hx %04hx %04hx %04hx\n", + i,val[0],val[1],val[2],val[3],val[4] ); + } +} +#endif + +int +m88e6060_initialize( int devAddr ) +{ + static char *_f = "m88e6060_initialize:"; + m88x_regCfg_t *p; + int err; + int i; + unsigned short val; + + /*** reset all phys into powerdown ************************************/ + for (i=0, err=0; i<M88X_PHY_CNT; i++) { + err += miiphy_read( devAddr+phyTab[i],M88X_PHY_CNTL,&val ); + /* keep SpeedLSB, Duplex */ + val &= 0x2100; + /* set SWReset, AnegEn, PwrDwn, RestartAneg */ + val |= 0x9a00; + err += miiphy_write( devAddr+phyTab[i],M88X_PHY_CNTL,val ); + } + if (err) { + printf( "%s [ERR] reset phys\n",_f ); + return( -1 ); + } + + /*** disable all ports ************************************************/ + for (i=0, err=0; i<M88X_PRT_CNT; i++) { + err += miiphy_read( devAddr+prtTab[i],M88X_PRT_CNTL,&val ); + val &= 0xfffc; + err += miiphy_write( devAddr+prtTab[i],M88X_PRT_CNTL,val ); + } + if (err) { + printf( "%s [ERR] disable ports\n",_f ); + return( -1 ); + } + + /*** initialize switch ************************************************/ + /* set switch mac addr */ +#define ea eth_get_dev()->enetaddr + val = (ea[4] << 8) | ea[5]; + err = miiphy_write( devAddr+15,M88X_GLB_MAC45,val ); + val = (ea[2] << 8) | ea[3]; + err += miiphy_write( devAddr+15,M88X_GLB_MAC23,val ); + val = (ea[0] << 8) | ea[1]; +#undef ea + val &= 0xfeff; /* clear DiffAddr */ + err += miiphy_write( devAddr+15,M88X_GLB_MAC01,val ); + if (err) { + printf( "%s [ERR] switch mac address register\n",_f ); + return( -1 ); + } + + /* !DiscardExcessive, MaxFrameSize, CtrMode */ + err = miiphy_read( devAddr+15,M88X_GLB_CNTL,&val ); + val &= 0xd870; + val |= 0x0500; + err += miiphy_write( devAddr+15,M88X_GLB_CNTL,val ); + if (err) { + printf( "%s [ERR] switch global control register\n",_f ); + return( -1 ); + } + + /* LernDis off, ATUSize 1024, AgeTime 5min */ + err = miiphy_read( devAddr+15,M88X_ATU_CNTL,&val ); + val &= 0x000f; + val |= 0x2130; + err += miiphy_write( devAddr+15,M88X_ATU_CNTL,val ); + if (err) { + printf( "%s [ERR] atu control register\n",_f ); + return( -1 ); + } + + /*** initialize ports *************************************************/ + for (i=0; i<M88X_PRT_CNT; i++) { + if ((p = prtCfg[i]) == NULL) { + continue; + } + while (p->reg != -1) { + err = 0; + err += miiphy_read( devAddr+prtTab[i],p->reg,&val ); + val &= p->msk; + val |= p->val; + err += miiphy_write( devAddr+prtTab[i],p->reg,val ); + if (err) { + printf( "%s [ERR] config port %d register %d\n",_f,i,p->reg ); + /* XXX what todo */ + } + p++; + } + } + + /*** initialize phys **************************************************/ + for (i=0; i<M88X_PHY_CNT; i++) { + if ((p = phyCfg[i]) == NULL) { + continue; + } + while (p->reg != -1) { + err = 0; + err += miiphy_read( devAddr+phyTab[i],p->reg,&val ); + val &= p->msk; + val |= p->val; + err += miiphy_write( devAddr+phyTab[i],p->reg,val ); + if (err) { + printf( "%s [ERR] config phy %d register %d\n",_f,i,p->reg ); + /* XXX what todo */ + } + p++; + } + } + udelay(100000); + return( 0 ); +} +#endif |
