summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--CHANGELOG5
-rw-r--r--Makefile5
-rw-r--r--board/funkwerk/vovpn-gw/Makefile46
-rw-r--r--board/funkwerk/vovpn-gw/config.mk21
-rw-r--r--board/funkwerk/vovpn-gw/flash.c506
-rw-r--r--board/funkwerk/vovpn-gw/m88e6060.c262
-rw-r--r--board/funkwerk/vovpn-gw/m88e6060.h94
-rw-r--r--board/funkwerk/vovpn-gw/u-boot.lds122
-rw-r--r--board/funkwerk/vovpn-gw/vovpn-gw.c375
-rw-r--r--cpu/mpc8220/fec.c70
-rw-r--r--cpu/mpc8260/cpu.c2
-rw-r--r--include/configs/VoVPN-GW.h406
-rw-r--r--lib_ppc/board.c3
13 files changed, 1880 insertions, 37 deletions
diff --git a/CHANGELOG b/CHANGELOG
index cb4e1a3704..717f4aa291 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,11 @@
Changes for U-Boot 1.1.3:
======================================================================
+* Patch by Juergen Selent, 17 May 2005:
+ Add support for Funkwerk VoVPN gateway module.
+
+* Cleanup debug code for MPC8220 FEC driver
+
* Extend burst mode RAM test program to take a loop count
(0 = infinite)
diff --git a/Makefile b/Makefile
index 296e208a44..428406fde2 100644
--- a/Makefile
+++ b/Makefile
@@ -1152,6 +1152,11 @@ TQM8265_AA_config: unconfig
fi
@./mkconfig -a TQM8260 ppc mpc8260 tqm8260
+VoVPN-GW_66MHz_config \
+VoVPN-GW_100MHz_config: unconfig
+ @echo "#define CONFIG_CLKIN_$(word 2,$(subst _, ,$@))" > include/config.h
+ @./mkconfig -a VoVPN-GW ppc mpc8260 vovpn-gw funkwerk
+
ZPC1900_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8260 zpc1900
diff --git a/board/funkwerk/vovpn-gw/Makefile b/board/funkwerk/vovpn-gw/Makefile
new file mode 100644
index 0000000000..f77cc60a94
--- /dev/null
+++ b/board/funkwerk/vovpn-gw/Makefile
@@ -0,0 +1,46 @@
+#
+# (C) Copyright 2001
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = lib$(BOARD).a
+
+OBJS := $(BOARD).o flash.o m88e6060.o
+
+$(LIB): $(OBJS) $(SOBJS)
+ $(AR) crv $@ $(OBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+ $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+-include .depend
+
+#########################################################################
diff --git a/board/funkwerk/vovpn-gw/config.mk b/board/funkwerk/vovpn-gw/config.mk
new file mode 100644
index 0000000000..e59b4831da
--- /dev/null
+++ b/board/funkwerk/vovpn-gw/config.mk
@@ -0,0 +1,21 @@
+# (C) Copyright 2004
+# Elmeg Communications Systems GmbH, Juergen Selent (j.selent@elmeg.de)
+#
+# Support for the Elmeg VoVPN Gateway Module
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+
+TEXT_BASE = 0xfff00000
diff --git a/board/funkwerk/vovpn-gw/flash.c b/board/funkwerk/vovpn-gw/flash.c
new file mode 100644
index 0000000000..1e53d45877
--- /dev/null
+++ b/board/funkwerk/vovpn-gw/flash.c
@@ -0,0 +1,506 @@
+/*
+ * (C) Copyright 2004
+ * Elmeg Communications Systems GmbH, Juergen Selent (j.selent@elmeg.de)
+ *
+ * Support for the Elmeg VoVPN Gateway Module
+ * ------------------------------------------
+ * This is a signle bank flashdriver for INTEL 28F320J3, 28F640J3
+ * and 28F128J3A flashs working in 8 Bit mode.
+ *
+ * Most of this code is taken from existing u-boot source code.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+
+#define FLASH_CMD_READ_ID 0x90
+#define FLASH_CMD_READ_STATUS 0x70
+#define FLASH_CMD_RESET 0xff
+#define FLASH_CMD_BLOCK_ERASE 0x20
+#define FLASH_CMD_ERASE_CONFIRM 0xd0
+#define FLASH_CMD_CLEAR_STATUS 0x50
+#define FLASH_CMD_SUSPEND_ERASE 0xb0
+#define FLASH_CMD_WRITE 0x40
+#define FLASH_CMD_WRITE_BUFF 0xe8
+#define FLASH_CMD_PROG_RESUME 0xd0
+#define FLASH_CMD_PROTECT 0x60
+#define FLASH_CMD_PROTECT_SET 0x01
+#define FLASH_CMD_PROTECT_CLEAR 0xd0
+#define FLASH_STATUS_DONE 0x80
+
+#define FLASH_WRITE_BUFFER_SIZE 32
+
+#ifdef CFG_FLASH_16BIT
+#define FLASH_WORD_SIZE unsigned short
+#define FLASH_ID_MASK 0xffff
+#define FLASH_CMD_ADDR_SHIFT 0
+#else
+#define FLASH_WORD_SIZE unsigned char
+#define FLASH_ID_MASK 0xff
+/* A0 is not used in either 8x or 16x for READ ID */
+#define FLASH_CMD_ADDR_SHIFT 1
+#endif
+
+
+static unsigned long
+flash_get(volatile FLASH_WORD_SIZE *addr, flash_info_t *info)
+{
+ volatile FLASH_WORD_SIZE *p;
+ FLASH_WORD_SIZE value;
+ int i;
+
+ addr[0] = FLASH_CMD_READ_ID;
+
+ /* manufactor */
+ value = addr[0 << FLASH_CMD_ADDR_SHIFT];
+ switch (value) {
+ case (INTEL_MANUFACT & FLASH_ID_MASK):
+ info->flash_id = FLASH_MAN_INTEL;
+ break;
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ info->sector_count = 0;
+ info->size = 0;
+ *addr = FLASH_CMD_RESET;
+ return (0);
+
+ }
+
+ /* device */
+ value = addr[1 << FLASH_CMD_ADDR_SHIFT];
+ switch (value) {
+ case (INTEL_ID_28F320J3A & FLASH_ID_MASK):
+ info->flash_id += FLASH_28F320J3A;
+ info->sector_count = 32;
+ info->size = 0x00400000;
+ break;
+ case (INTEL_ID_28F640J3A & FLASH_ID_MASK):
+ info->flash_id += FLASH_28F640J3A;
+ info->sector_count = 64;
+ info->size = 0x00800000;
+ break;
+ case (INTEL_ID_28F128J3A & FLASH_ID_MASK):
+ info->flash_id += FLASH_28F128J3A;
+ info->sector_count = 128;
+ info->size = 0x01000000;
+ break;
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ info->sector_count = 0;
+ info->size = 0;
+ *addr = FLASH_CMD_RESET;
+ return (0);
+ }
+
+ /* setup sectors */
+ for (i = 0; i < info->sector_count; i++) {
+ info->start[i] = (unsigned long)addr + (i * info->size/info->sector_count);
+ }
+
+ /* check protected sectors */
+ for (i = 0; i < info->sector_count; i++) {
+ p = (volatile FLASH_WORD_SIZE *)(info->start[i]);
+ info->protect[i] = p[2 << FLASH_CMD_ADDR_SHIFT] & 1;
+ }
+
+ /* reset bank */
+ *addr = FLASH_CMD_RESET;
+ return (info->size);
+}
+
+unsigned long
+flash_init(void)
+{
+ unsigned long size;
+ int i;
+
+ for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+ flash_info[i].flash_id = FLASH_UNKNOWN;
+ }
+ size = flash_get((volatile FLASH_WORD_SIZE *)CFG_FLASH_BASE, &flash_info[0]);
+ if (flash_info[0].flash_id == FLASH_UNKNOWN) {
+ printf ("## Unknown FLASH Size=0x%08lx\n", size);
+ return (0);
+ }
+
+ /* always protect 1 sector containing the HRCW */
+ flash_protect(FLAG_PROTECT_SET,
+ flash_info[0].start[0],
+ flash_info[0].start[1] - 1,
+ &flash_info[0]);
+
+#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+ flash_protect(FLAG_PROTECT_SET,
+ CFG_MONITOR_FLASH,
+ CFG_MONITOR_FLASH+CFG_MONITOR_LEN-1,
+ &flash_info[0]);
+#endif
+#ifdef CFG_ENV_IS_IN_FLASH
+ flash_protect(FLAG_PROTECT_SET,
+ CFG_ENV_ADDR,
+ CFG_ENV_ADDR+CFG_ENV_SECT_SIZE-1,
+ &flash_info[0]);
+#endif
+ return (size);
+}
+
+void
+flash_print_info(flash_info_t *info)
+{
+ int i;
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("missing or unknown FLASH type\n");
+ return;
+ }
+
+ switch (info->flash_id & FLASH_VENDMASK) {
+ case FLASH_MAN_INTEL: printf ("INTEL "); break;
+ default: printf ("Unknown Vendor "); break;
+ }
+
+ switch (info->flash_id & FLASH_TYPEMASK) {
+ case FLASH_28F320J3A: printf ("28F320JA3 (32 Mbit)\n");
+ break;
+ case FLASH_28F640J3A: printf ("28F640JA3 (64 Mbit)\n");
+ break;
+ case FLASH_28F128J3A: printf ("28F128JA3 (128 Mbit)\n");
+ break;
+ default: printf ("Unknown Chip Type");
+ break;
+ }
+
+ printf (" Size: %ld MB in %d Sectors\n",
+ info->size >> 20, info->sector_count);
+
+ printf (" Sector Start Addresses:");
+ for (i=0; i<info->sector_count; ++i) {
+ if ((i % 5) == 0)
+ printf ("\n ");
+ printf (" %08lX%s",
+ info->start[i],
+ info->protect[i] ? " (RO)" : " "
+ );
+ }
+ printf ("\n");
+}
+
+int
+flash_erase(flash_info_t *info, int s_first, int s_last)
+{
+ unsigned long start, now, last;
+ int flag, prot, sect;
+ volatile FLASH_WORD_SIZE *addr;
+ FLASH_WORD_SIZE status;
+
+ if ((s_first < 0) || (s_first > s_last)) {
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("- missing\n");
+ } else {
+ printf ("- no sectors to erase\n");
+ }
+ return (1);
+ }
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("Cannot erase unknown flash - aborted\n");
+ return (1);
+ }
+
+ prot = 0;
+ for (sect=s_first; sect<=s_last; ++sect) {
+ if (info->protect[sect]) {
+ prot++;
+ }
+ }
+
+ if (prot) {
+ printf ("- Warning: %d protected sectors will not be erased!\n", prot);
+ } else {
+ printf ("\n");
+ }
+
+ start = get_timer (0);
+ last = start;
+
+ for (sect = s_first; sect<=s_last; sect++) {
+ if (info->protect[sect]) {
+ continue;
+ }
+
+ addr = (volatile FLASH_WORD_SIZE *)(info->start[sect]);
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+#ifdef DEBUG
+ printf("Erase sector %d at start addr 0x%08X", sect, (unsigned int)info->start[sect]);
+#endif
+
+ *addr = FLASH_CMD_CLEAR_STATUS;
+ *addr = FLASH_CMD_BLOCK_ERASE;
+ *addr = FLASH_CMD_ERASE_CONFIRM;
+
+ /* re-enable interrupts if necessary */
+ if (flag) {
+ enable_interrupts();
+ }
+
+ /* wait at least 80us - let's wait 1 ms */
+ udelay (1000);
+
+ while (((status = *addr) & FLASH_STATUS_DONE) != FLASH_STATUS_DONE) {
+ if ((now=get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+ printf("Flash erase timeout at address %lx\n", info->start[sect]);
+ *addr = FLASH_CMD_SUSPEND_ERASE;
+ *addr = FLASH_CMD_RESET;
+ return (1);
+ }
+
+ /* show that we're waiting */
+ if ((now - last) > 1000) { /* every second */
+ putc ('.');
+ last = now;
+ }
+ }
+ *addr = FLASH_CMD_RESET;
+ }
+ printf (" done\n");
+ return (0);
+}
+
+static int
+write_buff2( volatile FLASH_WORD_SIZE *dst,
+ volatile FLASH_WORD_SIZE *src,
+ unsigned long cnt )
+{
+ unsigned long start;
+ FLASH_WORD_SIZE status;
+ int flag, i;
+
+ start = get_timer (0);
+ while (1) {
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+ dst[0] = FLASH_CMD_WRITE_BUFF;
+ if ((status = *dst) & FLASH_STATUS_DONE) {
+ break;
+ }
+
+ /* re-enable interrupts if necessary */
+ if (flag) {
+ enable_interrupts();
+ }
+
+ if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+ return (-1);
+ }
+ }
+ dst[0] = (FLASH_WORD_SIZE)(cnt - 1);
+ for (i=0; i<cnt; i++) {
+ dst[i] = src[i];
+ }
+ dst[0] = FLASH_CMD_PROG_RESUME;
+
+ if (flag) {
+ enable_interrupts();
+ }
+
+ return( 0 );
+}
+
+static int
+poll_status( volatile FLASH_WORD_SIZE *addr )
+{
+ unsigned long start;
+
+ start = get_timer (0);
+ /* wait for error or finish */
+ while (1) {
+ if (*addr == FLASH_STATUS_DONE) {
+ if (*addr == FLASH_STATUS_DONE) {
+ break;
+ }
+ }
+ if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+ *addr = FLASH_CMD_RESET;
+ return (-1);
+ }
+ }
+ *addr = FLASH_CMD_RESET;
+ return (0);
+}
+
+/*
+ * write_buff return values:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ * 4 - Flash not identified
+ */
+int
+write_buff(flash_info_t *info, uchar *src, ulong udst, ulong cnt)
+{
+ volatile FLASH_WORD_SIZE *addr, *dst;
+ unsigned long bcnt;
+ int flag, i;
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ return (4);
+ }
+
+ addr = (volatile FLASH_WORD_SIZE *)(info->start[0]);
+ dst = (volatile FLASH_WORD_SIZE *) udst;
+
+#ifdef CFG_FLASH_16BIT
+#error NYI
+#else
+ while (cnt > 0) {
+ /* Check if buffer write is possible */
+ if (cnt > 1 && (((unsigned long)dst & (FLASH_WRITE_BUFFER_SIZE - 1)) == 0)) {
+ bcnt = cnt > FLASH_WRITE_BUFFER_SIZE ? FLASH_WRITE_BUFFER_SIZE : cnt;
+ /* Check if Flash is (sufficiently) erased */
+ for (i=0; i<bcnt; i++) {
+ if ((dst[i] & src[i]) != src[i]) {
+ return (2);
+ }
+ }
+ if (write_buff2( dst,src,bcnt ) != 0) {
+ addr[0] = FLASH_CMD_READ_STATUS;
+ }
+ if (poll_status( dst ) != 0) {
+ return (1);
+ }
+ cnt -= bcnt;
+ dst += bcnt;
+ src += bcnt;
+ continue;
+ }
+
+ /* Check if Flash is (sufficiently) erased */
+ if ((*dst & *src) != *src) {
+ return (2);
+ }
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+ addr[0] = FLASH_CMD_ERASE_CONFIRM;
+ addr[0] = FLASH_CMD_WRITE;
+ *dst++ = *src++;
+ /* re-enable interrupts if necessary */
+ if (flag) {
+ enable_interrupts();
+ }
+
+ if (poll_status( dst ) != 0) {
+ return (1);
+ }
+ cnt --;
+ }
+#endif
+ return (0);
+}
+
+int
+flash_real_protect(flash_info_t *info, long sector, int prot)
+{
+ volatile FLASH_WORD_SIZE *addr;
+ unsigned long start;
+
+ addr = (volatile FLASH_WORD_SIZE *)(info->start[sector]);
+ *addr = FLASH_CMD_CLEAR_STATUS;
+ *addr = FLASH_CMD_PROTECT;
+
+ if(prot) {
+ *addr = FLASH_CMD_PROTECT_SET;
+ } else {
+ *addr = FLASH_CMD_PROTECT_CLEAR;
+ }
+
+ /* wait for error or finish */
+ start = get_timer (0);
+ while(!(addr[0] & FLASH_STATUS_DONE)){
+ if (get_timer(start) > CFG_FLASH_ERASE_TOUT) {
+ printf("Flash protect timeout at address %lx\n", info->start[sector]);
+ addr[0] = FLASH_CMD_RESET;
+ return (1);
+ }
+ }
+
+ /* Set software protect flag */
+ info->protect[sector] = prot;
+ *addr = FLASH_CMD_RESET;
+ return (0);
+}
+
+/*-----------------------------------------------------------------------
+ * Support for flash file system (JFFS2)
+ *
+ * We use custom partition info function because we have to fit the
+ * file system image between first sector (containing hard reset
+ * configuration word) and the sector containing U-Boot image. Standard
+ * partition info function does not allow for last sector specification
+ * and assumes that the file system occupies flash bank up to and
+ * including bank's last sector.
+ */
+#if (CONFIG_COMMANDS & CFG_CMD_JFFS2) && defined(CFG_JFFS_CUSTOM_PART)
+#error TODO
+
+#ifndef CFG_JFFS2_FIRST_SECTOR
+#define CFG_JFFS2_FIRST_SECTOR 0
+#endif
+#ifndef CFG_JFFS2_FIRST_BANK
+#define CFG_JFFS2_FIRST_BANK 0
+#endif
+#ifndef CFG_JFFS2_NUM_BANKS
+#define CFG_JFFS2_NUM_BANKS 1
+#endif
+#define CFG_JFFS2_LAST_BANK (CFG_JFFS2_FIRST_BANK + CFG_JFFS2_NUM_BANKS - 1)
+
+#include <jffs2/jffs2.h>
+
+static struct part_info partition;
+
+struct part_info *jffs2_part_info(int part_num)
+{
+ int i;
+
+ if (part_num == 0) {
+ if (partition.usr_priv == 0) {
+ partition.offset =
+ (unsigned char *) flash_info[CFG_JFFS2_FIRST_BANK].start[CFG_JFFS2_FIRST_SECTOR];
+ for (i = CFG_JFFS2_FIRST_BANK; i <= CFG_JFFS2_LAST_BANK; i++)
+ partition.size += flash_info[i].size;
+ partition.size -=
+ flash_info[CFG_JFFS2_FIRST_BANK].start[CFG_JFFS2_FIRST_SECTOR] -
+ flash_info[CFG_JFFS2_FIRST_BANK].start[0];
+#ifdef CFG_JFFS2_LAST_SECTOR
+ i = flash_info[CFG_JFFS2_LAST_BANK].sector_count - 1;
+ partition.size -=
+ flash_info[CFG_JFFS2_LAST_BANK].start[i] -
+ flash_info[CFG_JFFS2_LAST_BANK].start[CFG_JFFS2_LAST_SECTOR];
+#endif
+
+ partition.usr_priv = (void *)1;
+ }
+ return &partition;
+ }
+ return 0;
+}
+
+#endif /* JFFS2 */
diff --git a/board/funkwerk/vovpn-gw/m88e6060.c b/board/funkwerk/vovpn-gw/m88e6060.c
new file mode 100644
index 0000000000..e4ff3c37c5
--- /dev/null
+++ b/board/funkwerk/vovpn-gw/m88e6060.c
@@ -0,0 +1,262 @@
+/*
+ * (C) Copyright 2004
+ * Elmeg Communications Systems GmbH, Juergen Selent (j.selent@elmeg.de)
+ *
+ * Support for the Elmeg VoVPN Gateway Module
+ * ------------------------------------------
+ * Initialize Marvell M88E6060 Switch
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <ioports.h>
+#include <mpc8260.h>
+#include <asm/m8260_pci.h>
+#include <net.h>
+#include <miiphy.h>
+
+#include "m88e6060.h"
+
+#if (CONFIG_COMMANDS & CFG_CMD_NET)
+static int prtTab[M88X_PRT_CNT] = { 8, 9, 10, 11, 12, 13 };
+static int phyTab[M88X_PHY_CNT] = { 0, 1, 2, 3, 4 };
+
+static m88x_regCfg_t prtCfg0[] = {
+ { 4, 0x3e7c, 0x8000 },
+ { 4, 0x3e7c, 0x8003 },
+ { 6, 0x0fc0, 0x001e },
+ { -1, 0xffff, 0x0000 }
+};
+
+static m88x_regCfg_t prtCfg1[] = {
+ { 4, 0x3e7c, 0x8000 },
+ { 4, 0x3e7c, 0x8003 },
+ { 6, 0x0fc0, 0x001d },
+ { -1, 0xffff, 0x0000 }
+};
+
+static m88x_regCfg_t prtCfg2[] = {
+ { 4, 0x3e7c, 0x8000 },
+ { 4, 0x3e7c, 0x8003 },
+ { 6, 0x0fc0, 0x001b },
+ { -1, 0xffff, 0x0000 }
+};
+
+static m88x_regCfg_t prtCfg3[] = {
+ { 4, 0x3e7c, 0x8000 },
+ { 4, 0x3e7c, 0x8003 },
+ { 6, 0x0fc0, 0x0017 },
+ { -1, 0xffff, 0x0000 }
+};
+
+static m88x_regCfg_t prtCfg4[] = {
+ { 4, 0x3e7c, 0x8000 },
+ { 4, 0x3e7c, 0x8003 },
+ { 6, 0x0fc0, 0x000f },
+ { -1, 0xffff, 0x0000 }
+};
+
+static m88x_regCfg_t *prtCfg[M88X_PRT_CNT] = {
+ prtCfg0,prtCfg1,prtCfg2,prtCfg3,prtCfg4,NULL
+};
+
+static m88x_regCfg_t phyCfgX[] = {
+ { 4, 0xfa1f, 0x01e0 },
+ { 0, 0x213f, 0x1200 },
+ { 24, 0x81ff, 0x1200 },
+ { -1, 0xffff, 0x0000 }
+};
+
+static m88x_regCfg_t *phyCfg[M88X_PHY_CNT] = {
+ phyCfgX,phyCfgX,phyCfgX,phyCfgX,NULL
+};
+
+#if 0
+static void
+m88e6060_dump( int devAddr )
+{
+ int i, j;
+ unsigned short val[6];
+
+ printf( "M88E6060 Register Dump\n" );
+ printf( "====================================\n" );
+ printf( "PortNo 0 1 2 3 4 5\n" );
+ for (i=0; i<6; i++)
+ miiphy_read( devAddr+prtTab[i],M88X_PRT_STAT,&val[i] );
+ printf( "STAT %04hx %04hx %04hx %04hx %04hx %04hx\n",
+ val[0],val[1],val[2],val[3],val[4],val[5] );
+
+ for (i=0; i<6; i++)
+ miiphy_read( devAddr+prtTab[i],M88X_PRT_ID,&val[i] );
+ printf( "ID %04hx %04hx %04hx %04hx %04hx %04hx\n",
+ val[0],val[1],val[2],val[3],val[4],val[5] );
+
+ for (i=0; i<6; i++)
+ miiphy_read( devAddr+prtTab[i],M88X_PRT_CNTL,&val[i] );
+ printf( "CNTL %04hx %04hx %04hx %04hx %04hx %04hx\n",
+ val[0],val[1],val[2],val[3],val[4],val[5] );
+
+ for (i=0; i<6; i++)
+ miiphy_read( devAddr+prtTab[i],M88X_PRT_VLAN,&val[i] );
+ printf( "VLAN %04hx %04hx %04hx %04hx %04hx %04hx\n",
+ val[0],val[1],val[2],val[3],val[4],val[5] );
+
+ for (i=0; i<6; i++)
+ miiphy_read( devAddr+prtTab[i],M88X_PRT_PAV,&val[i] );
+ printf( "PAV %04hx %04hx %04hx %04hx %04hx %04hx\n",
+ val[0],val[1],val[2],val[3],val[4],val[5] );
+
+ for (i=0; i<6; i++)
+ miiphy_read( devAddr+prtTab[i],M88X_PRT_RX,&val[i] );
+ printf( "RX %04hx %04hx %04hx %04hx %04hx %04hx\n",
+ val[0],val[1],val[2],val[3],val[4],val[5] );
+
+ for (i=0; i<6; i++)
+ miiphy_read( devAddr+prtTab[i],M88X_PRT_TX,&val[i] );
+ printf( "TX %04hx %04hx %04hx %04hx %04hx %04hx\n",
+ val[0],val[1],val[2],val[3],val[4],val[5] );
+
+ printf( "------------------------------------\n" );
+ printf( "PhyNo 0 1 2 3 4\n" );
+ for (i=0; i<9; i++) {
+ for (j=0; j<5; j++) {
+ miiphy_read( devAddr+phyTab[j],i,&val[j] );
+ }
+ printf( "0x%02x %04hx %04hx %04hx %04hx %04hx\n",
+ i,val[0],val[1],val[2],val[3],val[4] );
+ }
+ for (i=0x10; i<0x1d; i++) {
+ for (j=0; j<5; j++) {
+ miiphy_read( devAddr+phyTab[j],i,&val[j] );
+ }
+ printf( "0x%02x %04hx %04hx %04hx %04hx %04hx\n",
+ i,val[0],val[1],val[2],val[3],val[4] );
+ }
+}
+#endif
+
+int
+m88e6060_initialize( int devAddr )
+{
+ static char *_f = "m88e6060_initialize:";
+ m88x_regCfg_t *p;
+ int err;
+ int i;
+ unsigned short val;
+
+ /*** reset all phys into powerdown ************************************/
+ for (i=0, err=0; i<M88X_PHY_CNT; i++) {
+ err += miiphy_read( devAddr+phyTab[i],M88X_PHY_CNTL,&val );
+ /* keep SpeedLSB, Duplex */
+ val &= 0x2100;
+ /* set SWReset, AnegEn, PwrDwn, RestartAneg */
+ val |= 0x9a00;
+ err += miiphy_write( devAddr+phyTab[i],M88X_PHY_CNTL,val );
+ }
+ if (err) {
+ printf( "%s [ERR] reset phys\n",_f );
+ return( -1 );
+ }
+
+ /*** disable all ports ************************************************/
+ for (i=0, err=0; i<M88X_PRT_CNT; i++) {
+ err += miiphy_read( devAddr+prtTab[i],M88X_PRT_CNTL,&val );
+ val &= 0xfffc;
+ err += miiphy_write( devAddr+prtTab[i],M88X_PRT_CNTL,val );
+ }
+ if (err) {
+ printf( "%s [ERR] disable ports\n",_f );
+ return( -1 );
+ }
+
+ /*** initialize switch ************************************************/
+ /* set switch mac addr */
+#define ea eth_get_dev()->enetaddr
+ val = (ea[4] << 8) | ea[5];
+ err = miiphy_write( devAddr+15,M88X_GLB_MAC45,val );
+ val = (ea[2] << 8) | ea[3];
+ err += miiphy_write( devAddr+15,M88X_GLB_MAC23,val );
+ val = (ea[0] << 8) | ea[1];
+#undef ea
+ val &= 0xfeff; /* clear DiffAddr */
+ err += miiphy_write( devAddr+15,M88X_GLB_MAC01,val );
+ if (err) {
+ printf( "%s [ERR] switch mac address register\n",_f );
+ return( -1 );
+ }
+
+ /* !DiscardExcessive, MaxFrameSize, CtrMode */
+ err = miiphy_read( devAddr+15,M88X_GLB_CNTL,&val );
+ val &= 0xd870;
+ val |= 0x0500;
+ err += miiphy_write( devAddr+15,M88X_GLB_CNTL,val );
+ if (err) {
+ printf( "%s [ERR] switch global control register\n",_f );
+ return( -1 );
+ }
+
+ /* LernDis off, ATUSize 1024, AgeTime 5min */
+ err = miiphy_read( devAddr+15,M88X_ATU_CNTL,&val );
+ val &= 0x000f;
+ val |= 0x2130;
+ err += miiphy_write( devAddr+15,M88X_ATU_CNTL,val );
+ if (err) {
+ printf( "%s [ERR] atu control register\n",_f );
+ return( -1 );
+ }
+
+ /*** initialize ports *************************************************/
+ for (i=0; i<M88X_PRT_CNT; i++) {
+ if ((p = prtCfg[i]) == NULL) {
+ continue;
+ }
+ while (p->reg != -1) {
+ err = 0;
+ err += miiphy_read( devAddr+prtTab[i],p->reg,&val );
+ val &= p->msk;
+ val |= p->val;
+ err += miiphy_write( devAddr+prtTab[i],p->reg,val );
+ if (err) {
+ printf( "%s [ERR] config port %d register %d\n",_f,i,p->reg );
+ /* XXX what todo */
+ }
+ p++;
+ }
+ }
+
+ /*** initialize phys **************************************************/
+ for (i=0; i<M88X_PHY_CNT; i++) {
+ if ((p = phyCfg[i]) == NULL) {
+ continue;
+ }
+ while (p->reg != -1) {
+ err = 0;
+ err += miiphy_read( devAddr+phyTab[i],p->reg,&val );
+ val &= p->msk;
+ val |= p->val;
+ err += miiphy_write( devAddr+phyTab[i],p->reg,val );
+ if (err) {
+ printf( "%s [ERR] config phy %d register %d\n",_f,i,p->reg );
+ /* XXX what todo */
+ }
+ p++;
+ }
+ }
+ udelay(100000);
+ return( 0 );
+}
+#endif
diff --git a/board/funkwerk/vovpn-gw/m88e6060.h b/board/funkwerk/vovpn-gw/m88e6060.h
new file mode 100644
index 0000000000..563a5e0f1c
--- /dev/null
+++ b/board/funkwerk/vovpn-gw/m88e6060.h
@@ -0,0 +1,94 @@
+/*
+ * (C) Copyright 2004
+ * Elmeg Communications Systems GmbH, Juergen Selent (j.selent@elmeg.de)
+ *
+ * Support for the Elmeg VoVPN Gateway Module
+ * ------------------------------------------
+ * Initialize Marvell M88E6060 Switch
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _INC_m88e6060_h_
+#define _INC_m88e6060_h_
+
+/* ************************************************************************** */
+/* *** DEFINES ************************************************************** */
+
+/* switch hw */
+#define M88X_PRT_CNT 6
+#define M88X_PHY_CNT 5
+
+/* phy register offsets */
+#define M88X_PHY_CNTL 0x00
+#define M88X_PHY_STAT 0x00
+#define M88X_PHY_ID0 0x02
+#define M88X_PHY_ID1 0x03
+#define M88X_PHY_ANEG_ADV 0x04
+#define M88X_PHY_LPA 0x05
+#define M88X_PHY_ANEG_EXP 0x06
+#define M88X_PHY_NPT 0x07
+#define M88X_PHY_LPNP 0x08
+
+/* port register offsets */
+#define M88X_PRT_STAT 0x00
+#define M88X_PRT_ID 0x03
+#define M88X_PRT_CNTL 0x04
+#define M88X_PRT_VLAN 0x06
+#define M88X_PRT_PAV 0x0b
+#define M88X_PRT_RX 0x10
+#define M88X_PRT_TX 0x11
+
+/* global/atu register offsets */
+#define M88X_GLB_STAT 0x00
+#define M88X_GLB_MAC01 0x01
+#define M88X_GLB_MAC23 0x02
+#define M88X_GLB_MAC45 0x03
+#define M88X_GLB_CNTL 0x04
+#define M88X_ATU_CNTL 0x0a
+#define M88X_ATU_OP 0x0b
+
+/* id0 register - 0x02 */
+#define M88X_PHY_ID0_VALUE 0x0141
+
+/* id1 register - 0x03 */
+#define M88X_PHY_ID1_VALUE 0x0c80 /* without revision ! */
+
+
+/* misc */
+#define M88E6060_ID ((M88X_PHY_ID0_VALUE<<16) | M88X_PHY_ID1_VALUE)
+
+
+
+/* ************************************************************************** */
+/* *** TYPEDEFS ************************************************************* */
+
+typedef struct {
+ int reg;
+ unsigned short msk;
+ unsigned short val;
+} m88x_regCfg_t;
+
+
+
+/* ************************************************************************** */
+/* *** PROTOTYPES *********************************************************** */
+
+extern int m88e6060_initialize( int );
+
+
+
+#endif /* _INC_m88e6060_h_ */
diff --git a/board/funkwerk/vovpn-gw/u-boot.lds b/board/funkwerk/vovpn-gw/u-boot.lds
new file mode 100644
index 0000000000..098c0464cc
--- /dev/null
+++ b/board/funkwerk/vovpn-gw/u-boot.lds
@@ -0,0 +1,122 @@
+/*
+ * (C) Copyright 2001-2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Modified by Yuli Barcohen <yuli@arabellasw.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SECTIONS
+{
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ cpu/mpc8260/start.o (.text)
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ . = ALIGN(16);
+ *(.rodata)
+ *(.rodata1)
+ *(.rodata.str1.4)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x0FFF) & 0xFFFFF000;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
+ __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(4096);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(4096);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}
+ENTRY(_start)
diff --git a/board/funkwerk/vovpn-gw/vovpn-gw.c b/board/funkwerk/vovpn-gw/vovpn-gw.c
new file mode 100644
index 0000000000..03b3cdfae3
--- /dev/null
+++ b/board/funkwerk/vovpn-gw/vovpn-gw.c
@@ -0,0 +1,375 @@
+/*
+ * (C) Copyright 2004
+ * Elmeg Communications Systems GmbH, Juergen Selent (j.selent@elmeg.de)
+ *
+ * Support for the Elmeg VoVPN Gateway Module
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <ioports.h>
+#include <mpc8260.h>
+#include <asm/m8260_pci.h>
+#include <miiphy.h>
+
+#include "m88e6060.h"
+
+/*
+ * I/O Port configuration table
+ *
+ * if conf is 1, then that port pin will be configured at boot time
+ * according to the five values podr/pdir/ppar/psor/pdat for that entry
+ */
+
+const iop_conf_t iop_conf_tab[4][32] = {
+ /* Port A configuration */
+ { /* conf ppar psor pdir podr pdat */
+ /* PA31 */ { 1, 0, 0, 1, 0, 0 }, /* GPO TP1252 */
+ /* PA30 */ { 1, 0, 0, 0, 0, 0 }, /* GPI BP_RES */
+ /* PA29 */ { 1, 0, 0, 1, 0, 0 }, /* GPO TP1253 */
+ /* PA28 */ { 1, 1, 1, 1, 0, 0 }, /* FCC1 RMII TX_EN */
+ /* PA27 */ { 1, 1, 1, 0, 0, 0 }, /* FCC1 RMII CRS_DV */
+ /* PA26 */ { 1, 1, 1, 0, 0, 0 }, /* FCC1 RMII RX_ERR */
+ /* PA25 */ { 1, 0, 0, 0, 0, 0 }, /* GPI HWID */
+ /* PA24 */ { 1, 0, 0, 0, 0, 0 }, /* GPI HWID */
+ /* PA23 */ { 1, 0, 0, 0, 0, 0 }, /* GPI HWID */
+ /* PA22 */ { 1, 0, 0, 0, 0, 0 }, /* GPI HWID */
+ /* PA21 */ { 1, 0, 0, 0, 0, 0 }, /* GPI HWID */
+ /* PA20 */ { 1, 0, 0, 1, 0, 1 }, /* GPO LED STATUS */
+ /* PA19 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 RMII TxD[1] */
+ /* PA18 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 RMII TxD[0] */
+ /* PA17 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 RMII RxD[0] */
+ /* PA16 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 RMII RxD[1] */
+ /* PA15 */ { 1, 0, 0, 1, 0, 0 }, /* GPO TP1255 */
+ /* PA14 */ { 1, 0, 0, 1, 0, 0 }, /* GPO TP???? */
+ /* PA13 */ { 1, 0, 0, 1, 0, 1 }, /* GPO EN_BCTL1 XXX jse */
+ /* PA12 */ { 1, 0, 0, 1, 0, 0 }, /* GPO SWITCH RESET */
+ /* PA11 */ { 1, 0, 0, 1, 0, 0 }, /* GPO DSP SL1 RESET */
+ /* PA10 */ { 1, 0, 0, 1, 0, 0 }, /* GPO DSP SL2 RESET */
+ /* PA9 */ { 1, 1, 0, 1, 0, 0 }, /* SMC2 TXD */
+ /* PA8 */ { 1, 1, 0, 0, 0, 0 }, /* SMC2 RXD */
+ /* PA7 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exit */
+ /* PA6 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exit */
+ /* PA5 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exit */
+ /* PA4 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exit */
+ /* PA3 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exit */
+ /* PA2 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exit */
+ /* PA1 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exit */
+ /* PA0 */ { 0, 0, 0, 0, 0, 0 } /* pin does not exit */
+ },
+
+ /* Port B configuration */
+ { /* conf ppar psor pdir podr pdat */
+ /* PB31 */ { 1, 0, 0, 1, 0, 0 }, /* GPO TP1257 */
+ /* PB30 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 RMII CRS_DV */
+ /* PB29 */ { 1, 1, 1, 1, 0, 0 }, /* FCC2 RMII TX_EN */
+ /* PB28 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 RMII RX_ERR */
+ /* PB27 */ { 1, 1, 1, 0, 1, 0 }, /* TDM_B2 L1TXD XXX val=0 */
+ /* PB26 */ { 1, 1, 1, 0, 1, 0 }, /* TDM_B2 L1RXD XXX val,dr */
+ /* PB25 */ { 1, 0, 0, 1, 0, 0 }, /* GPO TP1259 */
+ /* PB24 */ { 1, 1, 1, 0, 0, 0 }, /* TDM_B2 L1RSYNC */
+ /* PB23 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 RMII TxD[1] */
+ /* PB22 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 RMII TxD[0] */
+ /* PB21 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 RMII RxD[0] */
+ /* PB20 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 RMII RxD[1] */
+ /* PB19 */ { 1, 0, 0, 1, 0, 1 }, /* GPO PHY MDC */
+ /* PB18 */ { 1, 0, 0, 0, 0, 0 }, /* GPIO PHY MDIO */
+ /* PB17 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */
+ /* PB16 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */
+ /* PB15 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */
+ /* PB14 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */
+ /* PB13 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */
+ /* PB12 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */
+ /* PB11 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */
+ /* PB10 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */
+ /* PB9 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */
+ /* PB8 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */
+ /* PB7 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */
+ /* PB6 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */
+ /* PB5 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */
+ /* PB4 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */
+ /* PB3 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */
+ /* PB2 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */
+ /* PB1 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */
+ /* PB0 */ { 0, 0, 0, 0, 0, 0 } /* pin does not exist */
+ },
+
+ /* Port C */
+ { /* conf ppar psor pdir podr pdat */
+ /* PC31 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */
+ /* PC30 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */
+ /* PC29 */ { 1, 0, 0, 1, 0, 0 }, /* GPO TP1183 */
+ /* PC28 */ { 1, 0, 0, 1, 0, 0 }, /* GPO TP1184 */
+ /* PC27 */ { 1, 1, 0, 0, 0, 0 }, /* CLK5 TDM_A1 RX */
+ /* PC26 */ { 1, 0, 0, 1, 0, 0 }, /* GPO TP1185 */
+ /* PC25 */ { 1, 0, 0, 1, 0, 0 }, /* GPO TP1178 */
+ /* PC24 */ { 1, 0, 0, 1, 0, 0 }, /* GPO TP1186 */
+ /* PC23 */ { 1, 1, 0, 0, 0, 0 }, /* CLK9 TDM_B2 RX */
+ /* PC22 */ { 1, 1, 0, 0, 0, 0 }, /* CLK10 FCC1 RMII REFCLK */
+ /* PC21 */ { 1, 0, 0, 1, 0, 0 }, /* GPO TP1187 */
+ /* PC20 */ { 1, 0, 0, 1, 0, 0 }, /* GPO TP1182 */
+ /* PC19 */ { 1, 0, 0, 1, 0, 0 }, /* GPO TP1188 */
+ /* PC18 */ { 1, 0, 0, 1, 0, 0 }, /* GPO HW RESET */
+ /* PC17 */ { 1, 1, 0, 1, 0, 0 }, /* BRG8 SWITCH CLKIN */
+ /* PC16 */ { 1, 1, 0, 0, 0, 0 }, /* CLK16 FCC2 RMII REFCLK */
+ /* PC15 */ { 1, 0, 0, 0, 0, 0 }, /* GPI SL1_MTYPE_3 */
+ /* PC14 */ { 1, 0, 0, 0, 0, 0 }, /* GPI SL1_MTYPE_2 */
+ /* PC13 */ { 1, 0, 0, 0, 0, 0 }, /* GPI SL1_MTYPE_1 */
+ /* PC12 */ { 1, 0, 0, 0, 0, 0 }, /* GPI SL1_MTYPE_0 */
+ /* PC11 */ { 1, 0, 0, 1, 0, 0 }, /* GPO TP1176 */
+ /* PC10 */ { 1, 0, 0, 1, 0, 0 }, /* GPO TP1177 */
+ /* PC9 */ { 1, 0, 0, 0, 0, 0 }, /* GPI SL2_MTYPE_3 */
+ /* PC8 */ { 1, 0, 0, 0, 0, 0 }, /* GPI SL2_MTYPE_2 */
+ /* PC7 */ { 1, 0, 0, 0, 0, 0 }, /* GPI SL2_MTYPE_1 */
+ /* PC6 */ { 1, 0, 0, 0, 0, 0 }, /* GPI SL2_MTYPE_0 */
+ /* PC5 */ { 1, 1, 0, 1, 0, 0 }, /* SMC1 TXD */
+ /* PC4 */ { 1, 1, 0, 0, 0, 0 }, /* SMC1 RXD */
+ /* PC3 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */
+ /* PC2 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */
+ /* PC1 */ { 1, 0, 0, 1, 0, 0 }, /* GPO TP1192 */
+ /* PC0 */ { 1, 0, 0, 0, 0, 0 }, /* GPI RACK */
+ },
+
+ /* Port D */
+ { /* conf ppar psor pdir podr pdat */
+ /* PD31 */ { 1, 0, 0, 1, 0, 0 }, /* GPO TP1193 */
+ /* PD30 */ { 1, 0, 0, 1, 0, 0 }, /* GPO TP1194 */
+ /* PD29 */ { 1, 0, 0, 1, 0, 0 }, /* GPO TP1195 */
+ /* PD28 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */
+ /* PD27 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */
+ /* PD26 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */
+ /* PD25 */ { 1, 0, 0, 1, 0, 0 }, /* GPO TP1179 */
+ /* PD24 */ { 1, 0, 0, 1, 0, 0 }, /* GPO TP1180 */
+ /* PD23 */ { 1, 0, 0, 1, 0, 0 }, /* GPO TP1181 */
+ /* PD22 */ { 1, 1, 1, 0, 1, 0 }, /* TDM_A2 L1TXD */
+ /* PD21 */ { 1, 1, 1, 0, 1, 0 }, /* TDM_A2 L1RXD */
+ /* PD20 */ { 1, 1, 1, 0, 0, 0 }, /* TDM_A2 L1RSYNC */
+ /* PD19 */ { 1, 0, 0, 1, 0, 0 }, /* GPO TP1196 */
+ /* PD18 */ { 1, 0, 0, 1, 0, 0 }, /* GPO TP1197 */
+ /* PD17 */ { 1, 0, 0, 1, 0, 0 }, /* GPO TP1198 */
+ /* PD16 */ { 1, 0, 0, 1, 0, 0 }, /* GPO TP1199 */
+ /* PD15 */ { 1, 0, 0, 1, 0, 0 }, /* GPO TP1250 */
+ /* PD14 */ { 1, 0, 0, 1, 0, 0 }, /* GPO TP1251 */
+ /* PD13 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */
+ /* PD12 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */
+ /* PD11 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */
+ /* PD10 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */
+ /* PD9 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */
+ /* PD8 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */
+ /* PD7 */ { 0, 0, 0, 1, 0, 0 }, /* GPO FL_BYTE */
+ /* PD6 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */
+ /* PD5 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */
+ /* PD4 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */
+ /* PD3 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */
+ /* PD2 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */
+ /* PD1 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */
+ /* PD0 */ { 0, 0, 0, 0, 0, 0 } /* pin does not exist */
+ }
+};
+
+void reset_phy (void)
+{
+ volatile ioport_t *iop;
+#if (CONFIG_COMMANDS & CFG_CMD_NET)
+ int i;
+ unsigned short val;
+#endif
+
+ iop = ioport_addr((immap_t *)CFG_IMMR, 0);
+
+ /* Reset the PHY */
+ iop->pdat &= 0xfff7ffff; /* PA12 = |SWITCH_RESET */
+#if (CONFIG_COMMANDS & CFG_CMD_NET)
+ udelay(20000);
+ iop->pdat |= 0x00080000;
+ for (i=0; i<100; i++) {
+ udelay(20000);
+ if (miiphy_read( CFG_PHY_ADDR,2,&val ) == 0) {
+ break;
+ }
+ }
+ /* initialize switch */
+ m88e6060_initialize( CFG_PHY_ADDR );
+#endif
+}
+
+static unsigned long UPMATable[] = {
+ 0x8fffec00, 0x0ffcfc00, 0x0ffcfc00, 0x0ffcfc00, //Words 0 to 3
+ 0x0ffcfc04, 0x3ffdfc00, 0xfffffc01, 0xfffffc01, //Words 4 to 7
+ 0xfffffc00, 0xfffffc04, 0xfffffc01, 0xfffffc00, //Words 8 to 11
+ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, //Words 12 to 15
+ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, //Words 16 to 19
+ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, //Words 20 to 23
+ 0x8fffec00, 0x00fffc00, 0x00fffc00, 0x00fffc00, //Words 24 to 27
+ 0x0ffffc04, 0xfffffc01, 0xfffffc01, 0xfffffc01, //Words 28 to 31
+ 0xfffffc00, 0xfffffc01, 0xfffffc01, 0xfffffc00, //Words 32 to 35
+ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, //Words 36 to 39
+ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, //Words 40 to 43
+ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, //Words 44 to 47
+ 0xfffffc00, 0xfffffc04, 0xfffffc01, 0xfffffc00, //Words 48 to 51
+ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, //Words 52 to 55
+ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, //Words 56 to 59
+ 0xffffec00, 0xffffec04, 0xffffec00, 0xfffffc01 //Words 60 to 63
+};
+
+int board_early_init_f (void)
+{
+ volatile immap_t *immap;
+ volatile memctl8260_t *memctl;
+ volatile unsigned char *dummy;
+ int i;
+
+ immap = (immap_t *) CFG_IMMR;
+ memctl = &immap->im_memctl;
+
+#if 0
+ /* CS2-5 - DSP via UPMA */
+ dummy = (volatile unsigned char *) (memctl->memc_br2 & BRx_BA_MSK);
+ memctl->memc_mar = 0;
+ memctl->memc_mamr = MxMR_OP_WARR;
+ for (i = 0; i < 64; i++) {
+ memctl->memc_mdr = UPMATable[i];
+ *dummy = 0;
+ }
+ memctl->memc_mamr = 0x00044440;
+#else
+ /* CS7 - DPRAM via UPMA */
+ dummy = (volatile unsigned char *) (memctl->memc_br7 & BRx_BA_MSK);
+ memctl->memc_mar = 0;
+ memctl->memc_mamr = MxMR_OP_WARR;
+ for (i = 0; i < 64; i++) {
+ memctl->memc_mdr = UPMATable[i];
+ *dummy = 0;
+ }
+ memctl->memc_mamr = 0x00044440;
+#endif
+ return 0;
+}
+
+int misc_init_r (void)
+{
+ volatile ioport_t *iop;
+ unsigned char temp;
+#if 0
+ /* DUMP UPMA RAM */
+ volatile immap_t *immap;
+ volatile memctl8260_t *memctl;
+ volatile unsigned char *dummy;
+ unsigned char c;
+ int i;
+
+ immap = (immap_t *) CFG_IMMR;
+ memctl = &immap->im_memctl;
+
+
+ dummy = (volatile unsigned char *) (memctl->memc_br7 & BRx_BA_MSK);
+ memctl->memc_mar = 0;
+ memctl->memc_mamr = MxMR_OP_RARR;
+ for (i = 0; i < 64; i++) {
+ c = *dummy;
+ printf( "UPMA[%02d]: 0x%08lx,0x%08lx: 0x%08lx\n",i,
+ memctl->memc_mamr,
+ memctl->memc_mar,
+ memctl->memc_mdr );
+ }
+ memctl->memc_mamr = 0x00044440;
+#endif
+ /* enable buffers (DSP, DPRAM) */
+ iop = ioport_addr((immap_t *)CFG_IMMR, 0);
+ iop->pdat &= 0xfffbffff; /* PA13 = |EN_M_BCTL1 */
+
+ /* destroy DPRAM magic */
+ *(volatile unsigned char *)0xf0500000 = 0x00;
+
+ /* clear any pending DPRAM irq */
+ temp = *(volatile unsigned char *)0xf05003ff;
+
+ /* write module-id into DPRAM */
+ *(volatile unsigned char *)0xf0500201 = 0x50;
+
+ return 0;
+}
+
+#if defined(CONFIG_HAVE_OWN_RESET)
+int
+do_reset (void *cmdtp, int flag, int argc, char *argv[])
+{
+ volatile ioport_t *iop;
+
+ iop = ioport_addr((immap_t *)CFG_IMMR, 2);
+ iop->pdat |= 0x00002000; /* PC18 = HW_RESET */
+ return 1;
+}
+#endif /* CONFIG_HAVE_OWN_RESET */
+
+#define ns2clk(ns) (ns / (1000000000 / CONFIG_8260_CLKIN) + 1)
+
+long int initdram (int board_type)
+{
+#ifndef CFG_RAMBOOT
+ volatile immap_t *immap;
+ volatile memctl8260_t *memctl;
+ volatile uchar *ramaddr;
+ int i;
+ uchar c;
+
+ immap = (immap_t *) CFG_IMMR;
+ memctl = &immap->im_memctl;
+ ramaddr = (uchar *) CFG_SDRAM_BASE;
+ c = 0xff;
+
+ immap->im_siu_conf.sc_ppc_acr = 0x02;
+ immap->im_siu_conf.sc_ppc_alrh = 0x01267893;
+ immap->im_siu_conf.sc_ppc_alrl = 0x89abcdef;
+ immap->im_siu_conf.sc_tescr1 = 0x00000000;
+ immap->im_siu_conf.sc_tescr2 = 0x00000000;
+
+ memctl->memc_mptpr = CFG_MPTPR;
+ memctl->memc_psrt = CFG_PSRT;
+ memctl->memc_or1 = CFG_OR1_PRELIM;
+ memctl->memc_br1 = CFG_SDRAM_BASE | CFG_BR1_PRELIM;
+
+ /* Precharge all banks */
+ memctl->memc_psdmr = CFG_PSDMR | 0x28000000;
+ *ramaddr = c;
+
+ /* CBR refresh */
+ memctl->memc_psdmr = CFG_PSDMR | 0x08000000;
+ for (i = 0; i < 8; i++)
+ *ramaddr = c;
+
+ /* Mode Register write */
+ memctl->memc_psdmr = CFG_PSDMR | 0x18000000;
+ *ramaddr = c;
+
+ /* Refresh enable */
+ memctl->memc_psdmr = CFG_PSDMR | 0x40000000;
+ *ramaddr = c;
+#endif /* CFG_RAMBOOT */
+
+ return (CFG_SDRAM_SIZE);
+}
+
+int checkboard (void)
+{
+#ifdef CONFIG_CLKIN_66MHz
+ puts ("Board: Elmeg VoVPN Gateway Module (66MHz)\n");
+#else
+ puts ("Board: Elmeg VoVPN Gateway Module (100MHz)\n");
+#endif
+ return 0;
+}
diff --git a/cpu/mpc8220/fec.c b/cpu/mpc8220/fec.c
index 5746823358..e974ab3494 100644
--- a/cpu/mpc8220/fec.c
+++ b/cpu/mpc8220/fec.c
@@ -14,18 +14,18 @@
#include "dma.h"
#include "fec.h"
-#define DEBUG 0
+#undef DEBUG
#if (CONFIG_COMMANDS & CFG_CMD_NET) && defined(CONFIG_NET_MULTI) && \
defined(CONFIG_MPC8220_FEC)
/*#if (CONFIG_COMMANDS & CFG_CMD_NET)*/
-#if (DEBUG & 0x60)
+#ifdef DEBUG
static void tfifo_print (mpc8220_fec_priv * fec);
static void rfifo_print (mpc8220_fec_priv * fec);
#endif /* DEBUG */
-#if (DEBUG & 0x40)
+#ifdef DEBUG
static u32 local_crc32 (char *string, unsigned int crc_value, int len);
#endif
@@ -37,7 +37,7 @@ typedef struct {
} NBUF;
/********************************************************************/
-#if (DEBUG & 0x2)
+#ifdef DEBUG
static void mpc8220_fec_phydump (void)
{
u16 phyStatus, i;
@@ -144,7 +144,7 @@ static void mpc8220_fec_tbd_scrub (mpc8220_fec_priv * fec)
{
FEC_TBD *pUsedTbd;
-#if (DEBUG & 0x1)
+#ifdef DEBUG
printf ("tbd_scrub: fec->cleanTbdNum = %d, fec->usedTbdIndex = %d\n",
fec->cleanTbdNum, fec->usedTbdIndex);
#endif
@@ -155,7 +155,7 @@ static void mpc8220_fec_tbd_scrub (mpc8220_fec_priv * fec)
while (fec->cleanTbdNum < FEC_TBD_NUM) {
pUsedTbd = &fec->tbdBase[fec->usedTbdIndex];
if (pUsedTbd->status & FEC_TBD_READY) {
-#if (DEBUG & 0x20)
+#ifdef DEBUG
printf ("Cannot clean TBD %d, in use\n",
fec->cleanTbdNum);
#endif
@@ -242,7 +242,7 @@ static int mpc8220_fec_init (struct eth_device *dev, bd_t * bis)
struct mpc8220_dma *dma = (struct mpc8220_dma *) MMAP_DMA;
const u8 phyAddr = CONFIG_PHY_ADDR; /* Only one PHY */
-#if (DEBUG & 0x1)
+#ifdef DEBUG
printf ("mpc8220_fec_init... Begin\n");
#endif
@@ -304,7 +304,7 @@ static int mpc8220_fec_init (struct eth_device *dev, bd_t * bis)
*/
fec->eth->rfifo_cntrl = 0x0c000000;
fec->eth->rfifo_alarm = 0x0000030c;
-#if (DEBUG & 0x22)
+#ifdef DEBUG
if (fec->eth->rfifo_status & 0x00700000) {
printf ("mpc8220_fec_init() RFIFO error\n");
}
@@ -315,7 +315,7 @@ static int mpc8220_fec_init (struct eth_device *dev, bd_t * bis)
*/
/*fec->eth->tfifo_cntrl = 0x0c000000; */ /*tbd - rtm */
fec->eth->tfifo_cntrl = 0x0e000000;
-#if (DEBUG & 0x2)
+#ifdef DEBUG
printf ("tfifo_status: 0x%08x\n", fec->eth->tfifo_status);
printf ("tfifo_alarm: 0x%08x\n", fec->eth->tfifo_alarm);
#endif
@@ -407,7 +407,7 @@ static int mpc8220_fec_init (struct eth_device *dev, bd_t * bis)
/*
* Force 10Base-T, FDX operation
*/
-#if (DEBUG & 0x2)
+#ifdef DEBUG
printf ("Forcing 10 Mbps ethernet link... ");
#endif
miiphy_read (phyAddr, 0x1, &phyStatus);
@@ -420,13 +420,13 @@ static int mpc8220_fec_init (struct eth_device *dev, bd_t * bis)
do { /* wait for link status to go down */
udelay (10000);
if ((timeout--) == 0) {
-#if (DEBUG & 0x2)
+#ifdef DEBUG
printf ("hmmm, should not have waited...");
#endif
break;
}
miiphy_read (phyAddr, 0x1, &phyStatus);
-#if (DEBUG & 0x2)
+#ifdef DEBUG
printf ("=");
#endif
} while ((phyStatus & 0x0004)); /* !link up */
@@ -439,12 +439,12 @@ static int mpc8220_fec_init (struct eth_device *dev, bd_t * bis)
break;
}
miiphy_read (phyAddr, 0x1, &phyStatus);
-#if (DEBUG & 0x2)
+#ifdef DEBUG
printf ("+");
#endif
} while (!(phyStatus & 0x0004)); /* !link up */
-#if (DEBUG & 0x2)
+#ifdef DEBUG
printf ("done.\n");
#endif
} else { /* MII100 */
@@ -466,7 +466,7 @@ static int mpc8220_fec_init (struct eth_device *dev, bd_t * bis)
udelay (1000);
if ((timeout--) == 0) {
-#if (DEBUG & 0x2)
+#ifdef DEBUG
printf ("PHY auto neg 0 failed...\n");
#endif
return -1;
@@ -474,14 +474,14 @@ static int mpc8220_fec_init (struct eth_device *dev, bd_t * bis)
if (miiphy_read (phyAddr, 0x1, &phyStatus) !=
0) {
-#if (DEBUG & 0x2)
+#ifdef DEBUG
printf ("PHY auto neg 1 failed 0x%04x...\n", phyStatus);
#endif
return -1;
}
} while (!(phyStatus & 0x0004));
-#if (DEBUG & 0x2)
+#ifdef DEBUG
printf ("PHY auto neg complete! \n");
#endif
}
@@ -493,7 +493,7 @@ static int mpc8220_fec_init (struct eth_device *dev, bd_t * bis)
*/
fec->eth->ecntrl |= 0x00000006;
-#if (DEBUG & 0x2)
+#ifdef DEBUG
if (fec->xcv_type != SEVENWIRE)
mpc8220_fec_phydump ();
#endif
@@ -503,7 +503,7 @@ static int mpc8220_fec_init (struct eth_device *dev, bd_t * bis)
*/
DMA_TASK_ENABLE (FEC_RECV_TASK_NO);
-#if (DEBUG & 0x1)
+#ifdef DEBUG
printf ("mpc8220_fec_init... Done \n");
#endif
@@ -516,7 +516,7 @@ static void mpc8220_fec_halt (struct eth_device *dev)
mpc8220_fec_priv *fec = (mpc8220_fec_priv *) dev->priv;
int counter = 0xffff;
-#if (DEBUG & 0x2)
+#ifdef DEBUG
if (fec->xcv_type != SEVENWIRE)
mpc8220_fec_phydump ();
#endif
@@ -565,12 +565,12 @@ static void mpc8220_fec_halt (struct eth_device *dev)
*/
udelay (10);
-#if (DEBUG & 0x3)
+#ifdef DEBUG
printf ("Ethernet task stopped\n");
#endif
}
-#if (DEBUG & 0x60)
+#ifdef DEBUG
/********************************************************************/
static void tfifo_print (mpc8220_fec_priv * fec)
@@ -634,7 +634,7 @@ static int mpc8220_fec_send (struct eth_device *dev, volatile void *eth_data,
mpc8220_fec_priv *fec = (mpc8220_fec_priv *) dev->priv;
FEC_TBD *pTbd;
-#if (DEBUG & 0x20)
+#ifdef DEBUG
printf ("tbd status: 0x%04x\n", fec->tbdBase[0].status);
tfifo_print (fec);
#endif
@@ -655,7 +655,7 @@ static int mpc8220_fec_send (struct eth_device *dev, volatile void *eth_data,
* Check the number of vacant TxBDs.
*/
if (fec->cleanTbdNum < 1) {
-#if (DEBUG & 0x20)
+#ifdef DEBUG
printf ("No available TxBDs ...\n");
#endif
return -1;
@@ -670,7 +670,7 @@ static int mpc8220_fec_send (struct eth_device *dev, volatile void *eth_data,
pTbd->status |= FEC_TBD_LAST | FEC_TBD_TC | FEC_TBD_READY;
fec->tbdIndex = (fec->tbdIndex + 1) % FEC_TBD_NUM;
-#if (DEBUG & 0x100)
+#ifdef DEBUG
printf ("DMA_TASK_ENABLE, fec->tbdIndex = %d \n", fec->tbdIndex);
#endif
@@ -687,23 +687,23 @@ static int mpc8220_fec_send (struct eth_device *dev, volatile void *eth_data,
* Enable SmartDMA transmit task
*/
-#if (DEBUG & 0x20)
+#ifdef DEBUG
tfifo_print (fec);
#endif
DMA_TASK_ENABLE (FEC_XMIT_TASK_NO);
-#if (DEBUG & 0x20)
+#ifdef DEBUG
tfifo_print (fec);
#endif
-#if (DEBUG & 0x8)
+#ifdef DEBUG
printf ("+");
#endif
fec->cleanTbdNum -= 1;
-#if (DEBUG & 0x129) && (DEBUG & 0x80000000)
+#ifdef DEBUG
printf ("smartDMA ethernet Tx task enabled\n");
#endif
/*
@@ -711,7 +711,7 @@ static int mpc8220_fec_send (struct eth_device *dev, volatile void *eth_data,
*/
while (pTbd->status & FEC_TBD_READY) {
udelay (10);
-#if (DEBUG & 0x8)
+#ifdef DEBUG
printf ("TDB status = %04x\n", pTbd->status);
#endif
}
@@ -732,10 +732,8 @@ static int mpc8220_fec_recv (struct eth_device *dev)
int frame_length, len = 0;
NBUF *frame;
-#if (DEBUG & 0x1)
+#ifdef DEBUG
printf ("mpc8220_fec_recv %d Start...\n", fec->rbdIndex);
-#endif
-#if (DEBUG & 0x8)
printf ("-");
#endif
@@ -901,7 +899,7 @@ int miiphy_read (u8 phyAddr, u8 regAddr, u16 * retVal)
while ((timeout--) && (!(eth->ievent & 0x00800000)));
if (timeout == 0) {
-#if (DEBUG & 0x2)
+#ifdef DEBUG
printf ("Read MDIO failed...\n");
#endif
return -1;
@@ -940,7 +938,7 @@ int miiphy_write (u8 phyAddr, u8 regAddr, u16 data)
while ((timeout--) && (!(eth->ievent & 0x00800000)));
if (timeout == 0) {
-#if (DEBUG & 0x2)
+#ifdef DEBUG
printf ("Write MDIO failed...\n");
#endif
return -1;
@@ -954,7 +952,7 @@ int miiphy_write (u8 phyAddr, u8 regAddr, u16 data)
return 0;
}
-#if (DEBUG & 0x40)
+#ifdef DEBUG
static u32 local_crc32 (char *string, unsigned int crc_value, int len)
{
int i;
diff --git a/cpu/mpc8260/cpu.c b/cpu/mpc8260/cpu.c
index 8d634b075e..a34386f7c2 100644
--- a/cpu/mpc8260/cpu.c
+++ b/cpu/mpc8260/cpu.c
@@ -220,6 +220,7 @@ void upmconfig (uint upm, uint * table, uint size)
/* ------------------------------------------------------------------------- */
+#if !defined(CONFIG_HAVE_OWN_RESET)
int
do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
{
@@ -253,6 +254,7 @@ do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
return 1;
}
+#endif /* CONFIG_HAVE_OWN_RESET */
/* ------------------------------------------------------------------------- */
diff --git a/include/configs/VoVPN-GW.h b/include/configs/VoVPN-GW.h
new file mode 100644
index 0000000000..05f6f1898b
--- /dev/null
+++ b/include/configs/VoVPN-GW.h
@@ -0,0 +1,406 @@
+/*
+ * (C) Copyright 2004
+ * Elmeg Communications Systems GmbH, Juergen Selent (j.selent@elmeg.de)
+ *
+ * Support for the Elmeg VoVPN Gateway Module
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* define cpu used */
+#define CONFIG_MPC8272 1
+
+/* define busmode: 8260 */
+#undef CONFIG_BUSMODE_60x
+
+/* system clock rate (CLKIN) - equal to the 60x and local bus speed */
+#ifdef CONFIG_CLKIN_66MHz
+#define CONFIG_8260_CLKIN 66666666 /* in Hz */
+#else
+#define CONFIG_8260_CLKIN 100000000 /* in Hz */
+#endif
+
+/* call board_early_init_f */
+#define CONFIG_BOARD_EARLY_INIT_F 1
+
+/* have misc_init_r() function */
+#define CONFIG_MISC_INIT_R 1
+
+/* have reset_phy_r() function */
+#define CONFIG_RESET_PHY_R 1
+
+/* have special reset function */
+#define CONFIG_HAVE_OWN_RESET 1
+
+/* allow serial and ethaddr to be overwritten */
+#define CONFIG_ENV_OVERWRITE
+
+/* watchdog disabled */
+#undef CONFIG_WATCHDOG
+
+/* include support for bzip2 compressed images */
+#undef CONFIG_BZIP2
+
+/* status led */
+#undef CONFIG_STATUS_LED /* XXX jse */
+
+/* vendor parameter protection */
+#define CONFIG_ENV_OVERWRITE
+
+/*
+ * select serial console configuration
+ *
+ * if either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then
+ * CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4
+ * for SCC).
+ */
+#define CONFIG_CONS_ON_SMC
+#undef CONFIG_CONS_ON_SCC
+#undef CONFIG_CONS_NONE
+#define CONFIG_CONS_INDEX 1
+
+/* serial port default baudrate */
+#define CONFIG_BAUDRATE 115200
+
+/* echo on for serial download */
+#define CONFIG_LOADS_ECHO 1
+
+/* don't allow baudrate change */
+#undef CFG_LOADS_BAUD_CHANGE
+
+/* supported baudrates */
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+
+/*
+ * select ethernet configuration
+ *
+ * if either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected, then
+ * CONFIG_ETHER_INDEX must be set to the channel number (1-4 for SCC, 1-3
+ * for FCC)
+ *
+ * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
+ * defined elsewhere (as for the console), or CFG_CMD_NET must be removed
+ * from CONFIG_COMMANDS to remove support for networking.
+ */
+#undef CONFIG_ETHER_ON_SCC
+#define CONFIG_ETHER_ON_FCC
+#undef CONFIG_ETHER_NONE
+
+#ifdef CONFIG_ETHER_ON_FCC
+
+/* which SCC/FCC channel for ethernet */
+#define CONFIG_ETHER_INDEX 1
+
+/* Marvell Switch SMI base addr */
+#define CFG_PHY_ADDR 0x10
+
+/* FCC1 RMII REFCLK is CLK10 */
+#define CFG_CMXFCR_VALUE CMXFCR_TF1CS_CLK10
+#define CFG_CMXFCR_MASK (CMXFCR_FC1|CMXFCR_TF1CS_MSK)
+
+/* BDs and buffers on 60x bus */
+#define CFG_CPMFCR_RAMTYPE 0
+
+/* Local Protect, Full duplex, Flowcontrol, RMII */
+#define CFG_FCC_PSMR (FCC_PSMR_LPB|FCC_PSMR_FDE|\
+ FCC_PSMR_FCE|FCC_PSMR_RMII)
+
+/* bit-bang MII PHY management */
+#define CONFIG_BITBANGMII
+
+#define MDIO_PORT 1 /* Port B */
+#define CFG_MDIO_PIN 0x00002000 /* PB18 */
+#define CFG_MDC_PIN 0x00001000 /* PB19 */
+#define MDIO_ACTIVE (iop->pdir |= CFG_MDIO_PIN)
+#define MDIO_TRISTATE (iop->pdir &= ~CFG_MDIO_PIN)
+#define MDIO_READ ((iop->pdat & CFG_MDIO_PIN) != 0)
+#define MDIO(bit) if(bit) iop->pdat |= CFG_MDIO_PIN; \
+ else iop->pdat &= ~CFG_MDIO_PIN
+#define MDC(bit) if(bit) iop->pdat |= CFG_MDC_PIN; \
+ else iop->pdat &= ~CFG_MDC_PIN
+#define MIIDELAY udelay(1)
+
+#endif
+
+/* configure commands */
+#define CONFIG_COMMANDS ( CFG_CMD_AUTOSCRIPT | \
+ CFG_CMD_BDI | \
+ CFG_CMD_CONSOLE | \
+ CFG_CMD_ECHO | \
+ CFG_CMD_ENV | \
+ CFG_CMD_FLASH | \
+ CFG_CMD_IMI | \
+ CFG_CMD_IMLS | \
+ CFG_CMD_LOADB | \
+ CFG_CMD_MEMORY | \
+ CFG_CMD_MISC | \
+ CFG_CMD_NET | \
+ CFG_CMD_PING | \
+ CFG_CMD_RUN )
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+/*
+ * boot options & environment
+ */
+#define CONFIG_BOOTDELAY 3
+#define CONFIG_BOOTCOMMAND "run flash_self"
+#undef CONFIG_BOOTARGS
+#define CONFIG_EXTRA_ENV_SETTINGS \
+"clean_nv=erase fff20000 ffffffff\0" \
+"update_boss=tftp 100000 PPC/logic157.bin; protect off fff00000 ffffffff; erase fff00000 ffffffff; cp.b 100000 fff00000 $(filesize); tftp 100000 PPC/bootmon157.bin; cp.b 100000 fff20000 $(filesize)\0" \
+"update_lx=tftp 100000 $(kernel); erase $(kernel_addr) ffefffff; cp.b 100000 $(kernel_addr) $(filesize)\0" \
+"update_fs=tftp 100000 $(fs).$(fstype); erase ff840000 ffdfffff; cp.b 100000 ff840000 $(filesize)\0" \
+"update_ub=tftp 100000 $(uboot); protect off fff00000 fff1ffff; erase fff00000 fff1ffff; cp.b 100000 fff00000 $(filesize); protect off ff820000 ff83ffff; erase ff820000 ff83ffff\0" \
+"flashargs=setenv bootargs root=$(rootdev) rw rootfstype=$(fstype)\0" \
+"nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpath)\0" \
+"addip=setenv bootargs $(bootargs) ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname):$(netdev):off\0" \
+"addmisc=setenv bootargs $(bootargs) console=$(console),$(baudrate) ethaddr=$(ethaddr) panic=1\0" \
+"net_nfs=tftpboot 400000 $(kernel); run nfsargs addip addmisc; bootm\0" \
+"net_self=tftpboot 400000 $(kernel); run flashargs addmisc; bootm\0" \
+"flash_self=run flashargs addmisc; bootm $(kernel_addr)\0" \
+"flash_nfs=run nfsargs addip addmisc; bootm $(kernel_addr)\0" \
+"fstype=cramfs\0" \
+"rootpath=/root_fs\0" \
+"uboot=PPC/u-boot.bin\0" \
+"kernel=PPC/uImage\0" \
+"kernel_addr=ffe00000\0" \
+"fs=PPC/root_fs\0" \
+"console=ttyS0\0" \
+"netdev=eth0\0" \
+"rootdev=31:3\0" \
+"ethaddr=00:09:4f:01:02:03\0" \
+"ipaddr=10.0.0.201\0" \
+"netmask=255.255.255.0\0" \
+"serverip=10.0.0.136\0" \
+"gatewayip=10.0.0.10\0" \
+"hostname=bastard\0" \
+""
+
+
+/*
+ * miscellaneous configurable options
+ */
+
+/* undef to save memory */
+#define CFG_LONGHELP
+
+/* monitor command prompt */
+#define CFG_PROMPT "=> "
+
+/* console i/o buffer size */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE 1024
+#else
+#define CFG_CBSIZE 256
+#endif
+
+/* print buffer size */
+#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
+
+/* max number of command args */
+#define CFG_MAXARGS 16
+
+/* boot argument buffer size */
+#define CFG_BARGSIZE CFG_CBSIZE
+
+/* memtest works on */
+#define CFG_MEMTEST_START 0x00100000
+/* 1 ... 15 MB in DRAM */
+#define CFG_MEMTEST_END 0x00f00000
+/* full featured memtest */
+#define CFG_ALT_MEMTEST
+
+/* default load address */
+#define CFG_LOAD_ADDR 0x00100000
+
+/* decrementer freq: 1 ms ticks */
+#define CFG_HZ 1000
+
+/* configure flash */
+#define CFG_FLASH_BASE 0xff800000
+#define CFG_MAX_FLASH_BANKS 1
+#define CFG_MAX_FLASH_SECT 64
+#define CFG_FLASH_SIZE 8
+#undef CFG_FLASH_16BIT
+#define CFG_FLASH_ERASE_TOUT 240000
+#define CFG_FLASH_WRITE_TOUT 500
+#define CFG_FLASH_LOCK_TOUT 500
+#define CFG_FLASH_UNLOCK_TOUT 10000
+#define CFG_FLASH_PROTECTION
+
+/* monitor in flash */
+#define CFG_MONITOR_OFFSET 0x00700000
+
+/* environment in flash */
+#define CFG_ENV_IS_IN_FLASH 1
+#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x00020000)
+#define CFG_ENV_SIZE 0x00020000
+#define CFG_ENV_SECT_SIZE 0x00020000
+
+/*
+ * Initial memory map for linux
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20)
+
+/* hard reset configuration words */
+#ifdef CONFIG_CLKIN_66MHz
+#define CFG_HRCW_MASTER 0x04643050
+#else
+#error NO HRCW FOR 100MHZ SPECIFIED !!!
+#endif
+#define CFG_HRCW_SLAVE1 0x00000000
+#define CFG_HRCW_SLAVE2 0x00000000
+#define CFG_HRCW_SLAVE3 0x00000000
+#define CFG_HRCW_SLAVE4 0x00000000
+#define CFG_HRCW_SLAVE5 0x00000000
+#define CFG_HRCW_SLAVE6 0x00000000
+#define CFG_HRCW_SLAVE7 0x00000000
+
+/* internal memory mapped register */
+#define CFG_IMMR 0xF0000000
+
+/* definitions for initial stack pointer and data area (in DPRAM) */
+#define CFG_INIT_RAM_ADDR CFG_IMMR
+#define CFG_INIT_RAM_END 0x2000
+#define CFG_GBL_DATA_SIZE 128
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+/*
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+#define CFG_SDRAM_BASE 0x00000000
+#define CFG_SDRAM_SIZE (32*1024*1024)
+#define CFG_MONITOR_BASE TEXT_BASE
+#define CFG_MONITOR_FLASH (CFG_FLASH_BASE + CFG_MONITOR_OFFSET)
+#define CFG_MONITOR_LEN 0x00020000
+#define CFG_MALLOC_LEN 0x00020000
+
+/* boot flags */
+#define BOOTFLAG_COLD 0x01 /* normal power-on */
+#define BOOTFLAG_WARM 0x02 /* software reboot */
+
+/* cache configuration */
+#define CFG_CACHELINE_SIZE 32 /* for MPC8260 */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT 5 /* log base 2 of above */
+#endif
+
+/*
+ * HIDx - Hardware Implementation-dependent Registers
+ *-----------------------------------------------------------------------
+ * HID0 also contains cache control - initially enable both caches and
+ * invalidate contents, then the final state leaves only the instruction
+ * cache enabled. Note that Power-On and Hard reset invalidate the caches,
+ * but Soft reset does not.
+ *
+ * HID1 has only read-only information - nothing to set.
+ */
+#define CFG_HID0_INIT (HID0_ICE|HID0_DCE|\
+ HID0_ICFI|HID0_DCI|HID0_IFEM|HID0_ABE)
+#define CFG_HID0_FINAL (HID0_IFEM|HID0_ABE)
+#define CFG_HID2 0
+
+/* RMR - reset mode register - turn on checkstop reset enable */
+#define CFG_RMR RMR_CSRE
+
+/* BCR - bus configuration */
+#define CFG_BCR 0x00000000
+
+/* SIUMCR - siu module configuration */
+#define CFG_SIUMCR 0x4905c000
+
+/* SYPCR - system protection control */
+#if defined(CONFIG_WATCHDOG)
+#define CFG_SYPCR 0xffffff87
+#else
+#define CFG_SYPCR 0xffffff83
+#endif
+
+/* TMCNTSC - time counter status and control */
+/* clear interrupts XXX jse */
+//#define CFG_TMCNTSC (TMCNTSC_SEC|TMCNTSC_ALR)
+#define CFG_TMCNTSC (TMCNTSC_SEC|TMCNTSC_ALR|\
+ TMCNTSC_TCF|TMCNTSC_TCE)
+
+/* PISCR - periodic interrupt status and control */
+/* clear interrupts XXX jse */
+//#define CFG_PISCR (PISCR_PS)
+#define CFG_PISCR (PISCR_PS|PISCR_PTF|PISCR_PTE)
+
+/* SCCR - system clock control */
+#define CFG_SCCR 0x000001a9
+
+/* RCCR - risc controller configuration */
+#define CFG_RCCR 0
+
+/*
+ * MEMORY MAP
+ * ----------
+ * CS0 - FLASH 8MB/8Bit base=0xff800000 (boot: 0xfe000000, 8x mirrored)
+ * CS1 - SDRAM 32MB/64Bit base=0x00000000
+ * CS2 - DSP/SL1 1MB/16Bit base=0xf0100000
+ * CS3 - DSP/SL2 1MB/16Bit base=0xf0200000
+ * CS4 - DSP/SL3 1MB/16Bit base=0xf0300000
+ * CS5 - DSP/SL4 1MB/16Bit base=0xf0400000
+ * CS7 - DPRAM 1KB/8Bit base=0xf0500000, size=32KB (32x mirrored)
+ * x - IMMR 384KB base=0xf0000000
+ */
+/* XXX jse 100MHz TODO */
+#define CFG_BR0_PRELIM 0xff800801
+#define CFG_OR0_PRELIM 0xff801e44
+#define CFG_BR1_PRELIM 0x00000041
+#define CFG_OR1_PRELIM 0xfe002ec0
+#if 1
+#define CFG_BR2_PRELIM 0xf0101001
+#define CFG_OR2_PRELIM 0xfff00ef4
+#define CFG_BR3_PRELIM 0xf0201001
+#define CFG_OR3_PRELIM 0xfff00ef4
+#define CFG_BR4_PRELIM 0xf0301001
+#define CFG_OR4_PRELIM 0xfff00ef4
+#define CFG_BR5_PRELIM 0xf0401001
+#define CFG_OR5_PRELIM 0xfff00ef4
+#else
+#define CFG_BR2_PRELIM 0xf0101081
+#define CFG_OR2_PRELIM 0xfff00104
+#define CFG_BR3_PRELIM 0xf0201081
+#define CFG_OR3_PRELIM 0xfff00104
+#define CFG_BR4_PRELIM 0xf0301081
+#define CFG_OR4_PRELIM 0xfff00104
+#define CFG_BR5_PRELIM 0xf0401081
+#define CFG_OR5_PRELIM 0xfff00104
+#endif
+#define CFG_BR7_PRELIM 0xf0500881
+#define CFG_OR7_PRELIM 0xffff8104
+#define CFG_MPTPR 0x2700
+#define CFG_PSDMR 0x822a2452 /* optimal */
+//#define CFG_PSDMR 0x822a48a3 /* relaxed */
+#define CFG_PSRT 0x1a
+
+/* "bad" address */
+#define CFG_RESET_ADDRESS 0x40000000
+
+#endif /* __CONFIG_H */
diff --git a/lib_ppc/board.c b/lib_ppc/board.c
index c6f5b18139..e46b8a9e6b 100644
--- a/lib_ppc/board.c
+++ b/lib_ppc/board.c
@@ -905,7 +905,8 @@ void board_init_r (gd_t *id, ulong dest_addr)
defined(CONFIG_PCU_E) || \
defined(CONFIG_RPXSUPER) || \
defined(CONFIG_STXGP3) || \
- defined(CONFIG_SPD823TS) )
+ defined(CONFIG_SPD823TS) || \
+ defined(CONFIG_RESET_PHY_R) )
WATCHDOG_RESET ();
debug ("Reset Ethernet PHY\n");
OpenPOWER on IntegriCloud