Merge branch 'master' of ../master into next

30 files changed, 546 insertions, 110 deletions

diff --git a/include/configs/MPC8360EMDS.h b/include/configs/MPC8360EMDS.h
index 7b82c43dd2..a9599405dd 100644
--- a/include/configs/MPC8360EMDS.h
+++ b/include/configs/MPC8360EMDS.h
@@ -296,13 +296,13 @@
 /*
  * CS4 on Local Bus, to PIB
  */
-#define CONFIG_SYS_BR4_PRELIM	0xf8010801 /* CS4 base address at 0xf8010000 */
+#define CONFIG_SYS_BR4_PRELIM	0xf8008801 /* CS4 base address at 0xf8008000 */
 #define CONFIG_SYS_OR4_PRELIM	0xffffe9f7 /* size 32KB, port size 8bit, GPCM */
 
 /*
  * CS5 on Local Bus, to PIB
  */
-#define CONFIG_SYS_BR5_PRELIM	0xf8008801 /* CS5 base address at 0xf8008000 */
+#define CONFIG_SYS_BR5_PRELIM	0xf8010801 /* CS5 base address at 0xf8010000 */
 #define CONFIG_SYS_OR5_PRELIM	0xffffe9f7 /* size 32KB, port size 8bit, GPCM */
 
 /*
diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h
index 850665a041..5c5be0ce91 100644
--- a/include/configs/MPC8536DS.h
+++ b/include/configs/MPC8536DS.h
@@ -242,9 +242,10 @@
 #define CONFIG_SYS_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
 #define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
 
-#if defined(CONFIG_SYS_SPL) || defined(CONFIG_RAMBOOT_NAND) \
-	|| defined(CONFIG_RAMBOOT_SDCARD) || defined(CONFIG_RAMBOOT_SPIFLASH)
+#if defined(CONFIG_RAMBOOT_NAND) || defined(CONFIG_RAMBOOT_SDCARD) || \
+    defined(CONFIG_RAMBOOT_SPIFLASH)
 #define CONFIG_SYS_RAMBOOT
+#define CONFIG_SYS_EXTRA_ENV_RELOC
 #else
 #undef CONFIG_SYS_RAMBOOT
 #endif
diff --git a/include/configs/MPC8569MDS.h b/include/configs/MPC8569MDS.h
index c7973b46a2..9620fd0012 100644
--- a/include/configs/MPC8569MDS.h
+++ b/include/configs/MPC8569MDS.h
@@ -203,8 +203,9 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_SYS_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
 #define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
 
-#if defined(CONFIG_SYS_SPL) || defined(CONFIG_RAMBOOT_NAND)
+#if defined(CONFIG_RAMBOOT_NAND)
 #define CONFIG_SYS_RAMBOOT
+#define CONFIG_SYS_EXTRA_ENV_RELOC
 #else
 #undef CONFIG_SYS_RAMBOOT
 #endif
diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h
index 692c8115e1..1ee95aed28 100644
--- a/include/configs/MPC8572DS.h
+++ b/include/configs/MPC8572DS.h
@@ -202,6 +202,7 @@
 
 #define CONFIG_BOARD_EARLY_INIT_R	/* call board_early_init_r function */
 
+#define CONFIG_HWCONFIG			/* enable hwconfig */
 #define CONFIG_FSL_PIXIS	1	/* use common PIXIS code */
 #define PIXIS_BASE	0xffdf0000	/* PIXIS registers */
 #ifdef CONFIG_PHYS_64BIT
diff --git a/include/configs/P1_P2_RDB.h b/include/configs/P1_P2_RDB.h
index 610f3ed299..2dfee3d1bd 100644
--- a/include/configs/P1_P2_RDB.h
+++ b/include/configs/P1_P2_RDB.h
@@ -201,9 +201,10 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_SYS_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
 #define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
 
-#if defined(CONFIG_SYS_SPL) || defined(CONFIG_RAMBOOT_NAND) \
-	|| defined(CONFIG_RAMBOOT_SDCARD) || defined(CONFIG_RAMBOOT_SPIFLASH)
+#if defined(CONFIG_RAMBOOT_NAND) || defined(CONFIG_RAMBOOT_SDCARD) || \
+    defined(CONFIG_RAMBOOT_SPIFLASH)
 #define CONFIG_SYS_RAMBOOT
+#define CONFIG_SYS_EXTRA_ENV_RELOC
 #else
 #undef CONFIG_SYS_RAMBOOT
 #endif
@@ -436,14 +437,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 
 #define CONFIG_PHY_GIGE		1	/* Include GbE speed/duplex detection */
 
-/* TBI PHY configuration for SGMII mode */
-#define CONFIG_TSEC_TBICR_SETTINGS ( \
-		TBICR_PHY_RESET \
-		| TBICR_ANEG_ENABLE \
-		| TBICR_FULL_DUPLEX \
-		| TBICR_SPEED1_SET \
-		)
-
 #endif	/* CONFIG_TSEC_ENET */
 
 /*
diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h
index 9a9ba88907..70e8f07ba7 100644
--- a/include/configs/am3517_evm.h
+++ b/include/configs/am3517_evm.h
@@ -163,6 +163,7 @@
 #define CONFIG_DRIVER_OMAP34XX_I2C	1
 
 #undef CONFIG_CMD_NET
+#undef CONFIG_CMD_NFS
 /*
  * Board NAND Info.
  */
@@ -330,4 +331,10 @@ extern unsigned int boot_flash_sec;
 extern unsigned int boot_flash_type;
 #endif
 
+#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_RAM_ADDR	0x4020f800
+#define CONFIG_SYS_INIT_RAM_SIZE	0x800
+#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INIT_RAM_ADDR + \
+					 CONFIG_SYS_INIT_RAM_SIZE - \
+					 GENERATED_GBL_DATA_SIZE)
 #endif /* __CONFIG_H */
diff --git a/include/configs/aria.h b/include/configs/aria.h
index b3ca8d23f8..3a60de0d47 100644
--- a/include/configs/aria.h
+++ b/include/configs/aria.h
@@ -49,7 +49,6 @@
 #define CONFIG_E300		1	/* E300 Family */
 #define CONFIG_MPC512X		1	/* MPC512X family */
 #define CONFIG_FSL_DIU_FB	1	/* FSL DIU */
-#define CONFIG_FSL_DIU_LOGO_BMP	1	/* Don't include FSL DIU binary bmp */
 
 #define	CONFIG_SYS_TEXT_BASE	0xFFF00000
 
diff --git a/include/configs/at91rm9200ek.h b/include/configs/at91rm9200ek.h
index 14559f5ccc..810023a494 100644
--- a/include/configs/at91rm9200ek.h
+++ b/include/configs/at91rm9200ek.h
@@ -33,6 +33,20 @@
 #include <asm/sizes.h>
 
 /*
+ * set some initial configurations depending on configure target
+ *
+ * at91rm9200ek_config     -> boot from 0x0 in NOR Flash at CS0
+ * at91rm9200ek_ram_config -> continue booting from 0x20100000 in RAM; lowlevel
+ *                            initialisation was done by some preloader
+ */
+#ifdef CONFIG_RAMBOOT
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_SYS_TEXT_BASE 0x20100000
+#else
+#define CONFIG_SYS_TEXT_BASE 0x10000000
+#endif
+
+/*
  * AT91C_XTAL_CLOCK is the frequency of external xtal in hertz
  * AT91C_MAIN_CLOCK is the frequency of PLLA output
  * AT91C_MASTER_CLOCK is the peripherial clock
@@ -57,6 +71,8 @@
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_INITRD_TAG
 
+#define CONFIG_AT91FAMILY
+
 /*
  * Memory Configuration
  */
@@ -90,7 +106,7 @@
 #define CONFIG_SYS_EBI_CSA_VAL	0x00000002 /* CS1=CONFIG_SYS_SDRAM */
 #define CONFIG_SYS_SDRC_CR_VAL	0x2188c155 /* set up the CONFIG_SYS_SDRAM */
 #define CONFIG_SYS_SDRAM	CONFIG_SYS_SDRAM_BASE /* address of the SDRAM */
-#define CONFIG_SYS_SDRAM1	CONFIG_SYS_SDRAM_BASE /* address of the SDRAM */
+#define CONFIG_SYS_SDRAM1	(CONFIG_SYS_SDRAM_BASE+0x80)
 #define CONFIG_SYS_SDRAM_VAL	0x00000000 /* value written to CONFIG_SYS_SDRAM */
 #define CONFIG_SYS_SDRC_MR_VAL	0x00000002 /* Precharge All */
 #define CONFIG_SYS_SDRC_MR_VAL1	0x00000004 /* refresh */
diff --git a/include/configs/atngw100.h b/include/configs/atngw100.h
index 83056b6fd0..92491ca09d 100644
--- a/include/configs/atngw100.h
+++ b/include/configs/atngw100.h
@@ -104,8 +104,6 @@
 #define CONFIG_BOOTP_SUBNETMASK
 #define CONFIG_BOOTP_GATEWAY
 
-#define CONFIG_DOS_PARTITION		1
-
 /*
  * Command line configuration.
  */
diff --git a/include/configs/davinci_dvevm.h b/include/configs/davinci_dvevm.h
index e1b1db16e1..45214fa42a 100644
--- a/include/configs/davinci_dvevm.h
+++ b/include/configs/davinci_dvevm.h
@@ -50,7 +50,7 @@
 /*=======*/
 #define DV_EVM
 #define CONFIG_SYS_NAND_SMALLPAGE
-#define CONFIG_SYS_USE_NOR
+#define CONFIG_SYS_USE_NAND
 #define CONFIG_DISPLAY_CPUINFO
 /*===================*/
 /* SoC Configuration */
@@ -78,6 +78,7 @@
 #define CONFIG_STACKSIZE	(256*1024)	/* regular stack */
 #define PHYS_SDRAM_1		0x80000000	/* DDR Start */
 #define PHYS_SDRAM_1_SIZE	0x10000000	/* DDR size 256MB */
+
 #define DDR_8BANKS				/* 8-bank DDR2 (256MB) */
 /*====================*/
 /* Serial Driver info */
@@ -228,11 +229,13 @@
 #define CONFIG_PREBOOT "usb start"
 #endif
 #endif
-/*=======================*/
-/* KGDB support (if any) */
-/*=======================*/
-#ifdef CONFIG_CMD_KGDB
-#define CONFIG_KGDB_BAUDRATE	115200	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	1	/* which serial port to use */
-#endif
+
+#define CONFIG_MAX_RAM_BANK_SIZE	(256 << 20)	/* 256 MB */
+
+#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_RAM_SIZE	0x1000
+#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_SDRAM_BASE + \
+					 CONFIG_SYS_INIT_RAM_SIZE - \
+					 GENERATED_GBL_DATA_SIZE)
+
 #endif /* __CONFIG_H */
diff --git a/include/configs/igep0030.h b/include/configs/igep0030.h
index d61793c33d..1325bfa017 100644
--- a/include/configs/igep0030.h
+++ b/include/configs/igep0030.h
@@ -110,6 +110,7 @@
 #define CONFIG_MTD_DEVICE
 
 #undef CONFIG_CMD_NET		/* bootp, tftpboot, rarpboot	*/
+#undef CONFIG_CMD_NFS		/* nfs				*/
 #undef CONFIG_CMD_FLASH		/* flinfo, erase, protect	*/
 #undef CONFIG_CMD_IMLS		/* List all found images	*/
 
diff --git a/include/configs/mimc200.h b/include/configs/mimc200.h
index 6ed9e75bb4..16e2ec62ee 100644
--- a/include/configs/mimc200.h
+++ b/include/configs/mimc200.h
@@ -109,8 +109,6 @@
 #define CONFIG_BOOTP_SUBNETMASK
 #define CONFIG_BOOTP_GATEWAY
 
-#define CONFIG_DOS_PARTITION		1
-
 /*
  * Command line configuration.
  */
diff --git a/include/configs/mx51evk.h b/include/configs/mx51evk.h
index f98438d637..b4e57387af 100644
--- a/include/configs/mx51evk.h
+++ b/include/configs/mx51evk.h
@@ -216,8 +216,9 @@
  */
 #define CONFIG_SYS_NO_FLASH
 
-#define CONFIG_ENV_SECT_SIZE    (128 * 1024)
-#define CONFIG_ENV_SIZE		CONFIG_ENV_SECT_SIZE
-#define CONFIG_ENV_IS_NOWHERE
+#define CONFIG_ENV_OFFSET      (6 * 64 * 1024)
+#define CONFIG_ENV_SIZE        (8 * 1024)
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_SYS_MMC_ENV_DEV 0
 
 #endif
diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h
index 84b29866bc..5bdb3fd9ed 100644
--- a/include/configs/omap3_evm.h
+++ b/include/configs/omap3_evm.h
@@ -330,7 +330,11 @@ extern unsigned int boot_flash_type;
  * Support for relocation
  */
 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_SP_ADDR		(LOW_LEVEL_SRAM_STACK - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_ADDR	0x4020f800
+#define CONFIG_SYS_INIT_RAM_SIZE	0x800
+#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INIT_RAM_ADDR + \
+					 CONFIG_SYS_INIT_RAM_SIZE - \
+					 GENERATED_GBL_DATA_SIZE)
 
 /*
  * Define the board revision statically
diff --git a/include/configs/omap3_sdp3430.h b/include/configs/omap3_sdp3430.h
index a5eb6483b6..470898152e 100644
--- a/include/configs/omap3_sdp3430.h
+++ b/include/configs/omap3_sdp3430.h
@@ -309,6 +309,12 @@
 #define CONFIG_STACKSIZE_FIQ	(4 << 10) /* FIQ stack */
 #endif
 
+#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_RAM_ADDR	0x4020f800
+#define CONFIG_SYS_INIT_RAM_SIZE	0x800
+#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INIT_RAM_ADDR + \
+					 CONFIG_SYS_INIT_RAM_SIZE - \
+					 GENERATED_GBL_DATA_SIZE)
 /*
  * SDRAM Memory Map
  */
diff --git a/include/configs/omap3_zoom1.h b/include/configs/omap3_zoom1.h
index d9e8ea010f..f7d06521e3 100644
--- a/include/configs/omap3_zoom1.h
+++ b/include/configs/omap3_zoom1.h
@@ -236,6 +236,12 @@
 #define CONFIG_SYS_LOAD_ADDR		(OMAP34XX_SDRC_CS0)	/* default */
 							/* load address */
 
+#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_RAM_ADDR	0x4020f800
+#define CONFIG_SYS_INIT_RAM_SIZE	0x800
+#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INIT_RAM_ADDR + \
+					 CONFIG_SYS_INIT_RAM_SIZE - \
+					 GENERATED_GBL_DATA_SIZE)
 /*
  * OMAP3 has 12 GP timers, they can be driven by the system clock
  * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
diff --git a/include/configs/omap3_zoom2.h b/include/configs/omap3_zoom2.h
index 41abe044ed..73779331ce 100644
--- a/include/configs/omap3_zoom2.h
+++ b/include/configs/omap3_zoom2.h
@@ -188,6 +188,12 @@
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"usbtty=cdc_acm\0" \
 
+#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_RAM_ADDR	0x4020f800
+#define CONFIG_SYS_INIT_RAM_SIZE	0x800
+#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INIT_RAM_ADDR + \
+					 CONFIG_SYS_INIT_RAM_SIZE - \
+					 GENERATED_GBL_DATA_SIZE)
 /*
  * Miscellaneous configurable options
  */
diff --git a/include/configs/omap4_sdp4430.h b/include/configs/omap4_sdp4430.h
index bdd330a745..9a8bb7334c 100644
--- a/include/configs/omap4_sdp4430.h
+++ b/include/configs/omap4_sdp4430.h
@@ -140,6 +140,7 @@
 
 /* Disabled commands */
 #undef CONFIG_CMD_NET
+#undef CONFIG_CMD_NFS
 #undef CONFIG_CMD_FPGA		/* FPGA configuration Support   */
 #undef CONFIG_CMD_IMLS		/* List all found images        */
 
diff --git a/include/configs/pm9261.h b/include/configs/pm9261.h
index 7fcc9babdc..26e50490f7 100644
--- a/include/configs/pm9261.h
+++ b/include/configs/pm9261.h
@@ -45,6 +45,8 @@
 #define CONFIG_PM9261		1	/* on a Ronetix PM9261 Board	*/
 #define CONFIG_ARCH_CPU_INIT
 #undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff	*/
+#define CONFIG_SYS_TEXT_BASE	0
+#define CONFIG_AT91FAMILY
 
 /* clocks */
 /* CKGR_MOR - enable main osc. */
@@ -201,6 +203,7 @@
 #undef CONFIG_CMD_LOADS
 #undef CONFIG_CMD_IMLS
 
+#define CONFIG_CMD_CACHE
 #define CONFIG_CMD_PING		1
 #define CONFIG_CMD_DHCP		1
 #define CONFIG_CMD_NAND		1
@@ -370,6 +373,10 @@
 #define CONFIG_SYS_MALLOC_LEN		\
 		ROUND(3 * CONFIG_ENV_SIZE + 128 * 1024, 0x1000)
 
+#define CONFIG_SYS_SDRAM_BASE	PHYS_SDRAM
+#define CONFIG_SYS_INIT_SP_ADDR	(CONFIG_SYS_SDRAM_BASE + 0x1000 - \
+				GENERATED_GBL_DATA_SIZE)
+
 #define CONFIG_STACKSIZE		(32 * 1024)	/* regular stack */
 
 #ifdef CONFIG_USE_IRQ
diff --git a/include/configs/pm9263.h b/include/configs/pm9263.h
index 619af2d9bf..96e12f24ce 100644
--- a/include/configs/pm9263.h
+++ b/include/configs/pm9263.h
@@ -44,6 +44,8 @@
 #define CONFIG_PM9263		1	/* on a Ronetix PM9263 Board	*/
 #define CONFIG_ARCH_CPU_INIT
 #undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff	*/
+#define CONFIG_SYS_TEXT_BASE	0
+#define CONFIG_AT91FAMILY
 
 /* clocks */
 #define CONFIG_SYS_MOR_VAL						\
@@ -212,6 +214,7 @@
 #undef CONFIG_CMD_LOADS
 #undef CONFIG_CMD_IMLS
 
+#define CONFIG_CMD_CACHE
 #define CONFIG_CMD_PING		1
 #define CONFIG_CMD_DHCP		1
 #define CONFIG_CMD_NAND		1
@@ -401,6 +404,10 @@
  */
 #define CONFIG_SYS_MALLOC_LEN	ROUND(3 * CONFIG_ENV_SIZE + 128 * 1024, 0x1000)
 
+#define CONFIG_SYS_SDRAM_BASE	PHYS_SDRAM
+#define CONFIG_SYS_INIT_SP_ADDR	(CONFIG_SYS_SDRAM_BASE + 0x1000 - \
+				GENERATED_GBL_DATA_SIZE)
+
 #define CONFIG_STACKSIZE		(32 * 1024)	/* regular stack */
 
 #ifdef CONFIG_USE_IRQ
diff --git a/include/configs/pm9g45.h b/include/configs/pm9g45.h
index 3ed6b56bfe..ec51ccf062 100644
--- a/include/configs/pm9g45.h
+++ b/include/configs/pm9g45.h
@@ -39,6 +39,8 @@
 /* ARM asynchronous clock */
 #define CONFIG_SYS_AT91_MAIN_CLOCK	12000000 /* from 12 MHz crystal */
 #define CONFIG_SYS_HZ			1000
+#define CONFIG_SYS_TEXT_BASE	0x73f00000
+#define CONFIG_AT91FAMILY
 
 #define CONFIG_ARCH_CPU_INIT
 
@@ -79,6 +81,7 @@
 #undef CONFIG_CMD_FPGA
 #undef CONFIG_CMD_IMLS
 
+#define CONFIG_CMD_CACHE
 #define CONFIG_CMD_PING		1
 #define CONFIG_CMD_DHCP		1
 #define CONFIG_CMD_NAND		1
@@ -175,6 +178,10 @@
 #define CONFIG_SYS_MALLOC_LEN		ROUND(3 * CONFIG_ENV_SIZE + 128*1024,\
 					0x1000)
 
+#define CONFIG_SYS_SDRAM_BASE	PHYS_SDRAM
+#define CONFIG_SYS_INIT_SP_ADDR	(CONFIG_SYS_SDRAM_BASE + 0x1000 - \
+				GENERATED_GBL_DATA_SIZE)
+
 #define CONFIG_STACKSIZE		(32*1024)	/* regular stack */
 
 #ifdef CONFIG_USE_IRQ
diff --git a/include/configs/r7780mp.h b/include/configs/r7780mp.h
index 3416cb897e..802416f3e0 100644
--- a/include/configs/r7780mp.h
+++ b/include/configs/r7780mp.h
@@ -154,7 +154,6 @@
 #define CONFIG_RTL8169
 */
 /* AX88796L Support(NE2000 base chip) */
-#define CONFIG_DRIVER_NE2000
 #define CONFIG_DRIVER_AX88796L
 #define CONFIG_DRIVER_NE2000_BASE	0xA4100000
 #endif
diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h
index 541aec05ff..f53e79810b 100644
--- a/include/configs/s5p_goni.h
+++ b/include/configs/s5p_goni.h
@@ -217,4 +217,6 @@
 
 #define CONFIG_DOS_PARTITION		1
 
+#define CONFIG_SYS_INIT_SP_ADDR	(CONFIG_SYS_LOAD_ADDR - 0x1000000)
+
 #endif	/* __CONFIG_H */
diff --git a/include/configs/smdkc100.h b/include/configs/smdkc100.h
index e36b262a8e..fb8b43c06d 100644
--- a/include/configs/smdkc100.h
+++ b/include/configs/smdkc100.h
@@ -231,6 +231,8 @@
 
 #define CONFIG_DOS_PARTITION		1
 
+#define CONFIG_SYS_INIT_SP_ADDR	(CONFIG_SYS_LOAD_ADDR - 0x1000000)
+
 /*
  * Ethernet Contoller driver
  */
diff --git a/include/configs/top9000.h b/include/configs/top9000.h
new file mode 100644
index 0000000000..ff3933b19c
--- /dev/null
+++ b/include/configs/top9000.h
@@ -0,0 +1,314 @@
+/*
+ * (C) Copyright 2010
+ * Reinhard Meyer, EMK Elektronik, reinhard.meyer@emk-elektronik.de
+ *
+ * Configuation settings for the TOP9000 CPU module with AT91SAM9XE.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+/*
+ * top9000 with at91sam9xe256 or at91sam9xe512
+ *
+ * Initial Bootloader is in embedded flash.
+ * Vital Product Data, U-Boot Environment are in I2C-EEPROM.
+ * U-Boot is in embedded flash, a backup U-Boot can be in NAND flash.
+ * kernel and file system are either in NAND flash or on a micro SD card.
+ * NAND flash is optional.
+ * I2C EEPROM is never optional.
+ * SPI FRAM is optional.
+ * SPI ENC28J60 is optional.
+ * 16 or 32 bit wide SDRAM.
+ */
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * Warning: changing CONFIG_SYS_TEXT_BASE requires
+ * adapting the initial boot program
+ */
+#define CONFIG_SYS_TEXT_BASE		0x21f00000	/* 31 MB into RAM */
+
+/* Command line configuration */
+#include <config_cmd_default.h>
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_SETGETDCR
+#undef CONFIG_CMD_XIMG
+#define CONFIG_CMD_ASKENV
+#define CONFIG_SYS_CBSIZE		256
+#define CONFIG_SYS_MAXARGS		16
+#define CONFIG_SYS_PBSIZE \
+	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_PROMPT		"TOP9000> "
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_CMD_BDI
+#define CONFIG_CMD_CACHE
+
+/* ARM asynchronous clock */
+#define CONFIG_SYS_AT91_MAIN_CLOCK	18432000	/* 18.432 MHz xtal */
+#define CONFIG_SYS_HZ			1000
+
+/* SoC */
+#define CONFIG_ARM926EJS		/* ARM926EJS Core */
+#define CONFIG_AT91FAMILY		/* it's a member of AT91 */
+#define CONFIG_AT91SAM9260		/* Atmel AT91SAM9260 based SoC */
+#define CONFIG_AT91SAM9XE
+
+/* Misc CPU related */
+#define CONFIG_AT91_LEGACY
+#define CONFIG_ARCH_CPU_INIT
+#undef	CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff	*/
+#define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_AT91RESET_EXTRST		/* assert external reset */
+
+/* general purpose I/O */
+#define CONFIG_AT91_GPIO
+#define CONFIG_AT91_GPIO_PULLUP	1	/* keep pullups on peripheral pins */
+
+/* serial console */
+#define CONFIG_ATMEL_USART
+#define CONFIG_USART3			/* USART 3 is DBGU !!! */
+#define CONFIG_BAUDRATE			115200
+#define CONFIG_SYS_BAUDRATE_TABLE	{115200 , 19200, 38400, 57600, 9600 }
+
+/* SD/MMC card */
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_GENERIC_ATMEL_MCI
+#define CONFIG_SYS_MMC_CD_PIN		AT91_PIN_PC9
+#define CONFIG_CMD_MMC
+
+/* Ethernet */
+#define CONFIG_MACB
+#define CONFIG_SYS_PHY_ID	1
+#define CONFIG_RMII
+#define CONFIG_NET_MULTI
+#define CONFIG_NET_RETRY_COUNT	20
+
+/* real time clock */
+#define CONFIG_RTC_AT91SAM9_RTT
+#define CONFIG_CMD_DATE
+
+#if defined(CONFIG_AT91SAM9XE)
+/*
+ * NOR flash - use embedded flash of SAM9XE256/512
+ * U-Boot will not fit into 128K !
+ * 2010.09 will not fit into 256K with all options enabled !
+ *
+ * Layout:
+ * 16kB	1st Bootloader
+ * Rest U-Boot
+ * the first sector (16kB) of EFLASH cannot be unprotected
+ * with u-boot commands
+ */
+# define CONFIG_AT91_EFLASH
+# define CONFIG_SYS_FLASH_BASE		0x200000
+# define CONFIG_SYS_MAX_FLASH_SECT	32
+# define CONFIG_SYS_MAX_FLASH_BANKS	1
+# define CONFIG_SYS_FLASH_PROTECTION
+# define CONFIG_EFLASH_PROTSECTORS	1	/* protect first sector */
+#endif
+
+/* SPI */
+#define CONFIG_ATMEL_SPI
+#define CONFIG_CMD_SPI
+
+/* RAMTRON FRAM */
+#define CONFIG_CMD_SF
+#define CONFIG_ATMEL_SPI0		/* SPI used for FRAM is SPI0 */
+#define FRAM_SPI_BUS		0
+#define FRAM_CS_NUM		0
+#define CONFIG_SPI_FLASH		/* RAMTRON FRAM on SPI bus */
+#define CONFIG_SPI_FRAM_RAMTRON
+#define CONFIG_SF_DEFAULT_SPEED	1000000	/* be conservative here... */
+#define CONFIG_SF_DEFAULT_MODE	SPI_MODE_0
+#define CONFIG_SPI_FRAM_RAMTRON_NON_JEDEC	"FM25H20"
+
+/* Microchip ENC28J60 (second LAN) */
+#if defined(CONFIG_EVAL9000)
+# define CONFIG_ENC28J60
+# define CONFIG_ATMEL_SPI1		/* SPI used for ENC28J60 is SPI1 */
+# define ENC_SPI_BUS		1
+# define ENC_CS_NUM		0
+# define ENC_SPI_CLOCK	1000000
+#endif /* CONFIG_EVAL9000 */
+
+/*
+ * SDRAM: 1 bank, min 32, max 128 MB
+ * Initialized before u-boot gets started.
+ */
+#define CONFIG_NR_DRAM_BANKS		1
+#define CONFIG_SYS_SDRAM_BASE		0x20000000
+#define CONFIG_SYS_SDRAM_SIZE		0x08000000
+#define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
+#define CONFIG_SYS_MEMTEST_END		0x21e00000
+#define CONFIG_SYS_LOAD_ADDR \
+	(CONFIG_SYS_SDRAM_BASE + 0x01000000)
+/*
+ * Initial stack pointer: 16k - GENERATED_GBL_DATA_SIZE in internal SRAM,
+ * leaving the correct space for initial global data structure above
+ * that address while providing maximum stack area below.
+ */
+#define CONFIG_SYS_INIT_SP_ADDR \
+	(0x00300000 + 0x4000 - GENERATED_GBL_DATA_SIZE)
+
+/*
+ * NAND flash: 256 MB (optional)
+ *
+ * Layout:
+ * 640kB: u-boot (includes space for spare sectors, handled by
+ * initial loader)
+ * 2MB: kernel
+ * rest: file system
+ */
+#define CONFIG_NAND_ATMEL
+#define CONFIG_SYS_MAX_NAND_DEVICE	1
+#define CONFIG_SYS_NAND_BASE		0x40000000
+#define CONFIG_SYS_NAND_DBW_8
+#define CONFIG_SYS_NAND_MASK_ALE	(1 << 21)
+#define CONFIG_SYS_NAND_MASK_CLE	(1 << 22)
+#define CONFIG_SYS_NAND_ENABLE_PIN	AT91_PIN_PC14
+#define CONFIG_SYS_NAND_READY_PIN	AT91_PIN_PC13
+#define CONFIG_CMD_NAND
+
+/* USB */
+#define CONFIG_USB_ATMEL
+#define CONFIG_USB_OHCI_NEW
+#define CONFIG_DOS_PARTITION
+#define CONFIG_SYS_USB_OHCI_CPU_INIT
+#define CONFIG_SYS_USB_OHCI_REGS_BASE	0x00500000
+#define CONFIG_SYS_USB_OHCI_SLOT_NAME	"top9000"
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	2
+#define CONFIG_USB_STORAGE
+#define CONFIG_CMD_USB
+
+/* I2C support must always be enabled */
+#define CONFIG_SOFT_I2C
+#define CONFIG_CMD_I2C
+#define CONFIG_SYS_I2C_SPEED		400000
+#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_I2C_MULTI_BUS
+#define I2C0_PORT			AT91_PIO_PORTA
+#define SDA0_PIN			23
+#define SCL0_PIN			24
+#define I2C1_PORT			AT91_PIO_PORTB
+#define SDA1_PIN			12
+#define SCL1_PIN			13
+#define I2C_SOFT_DECLARATIONS		void iic_init(void);\
+					int iic_read(void);\
+					void iic_sda(int);\
+					void iic_scl(int);
+#define I2C_ACTIVE
+#define I2C_TRISTATE
+#define I2C_INIT			iic_init()
+#define I2C_READ			iic_read()
+#define I2C_SDA(bit)			iic_sda(bit)
+#define I2C_SCL(bit)			iic_scl(bit)
+#define I2C_DELAY			udelay(3)
+/* EEPROM configuration */
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	5
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	5
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	2
+#define CONFIG_SYS_EEPROM_SIZE		0x2000
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x57
+/* later: #define CONFIG_I2C_ENV_EEPROM_BUS	0 */
+/* ENV is always in I2C-EEPROM */
+#define CONFIG_ENV_IS_IN_EEPROM
+#define CONFIG_ENV_OFFSET		0x1000
+#define CONFIG_ENV_SIZE			0x0f00
+/* VPD settings */
+#define CONFIG_SYS_I2C_FACT_ADDR	0x57
+#define CONFIG_SYS_FACT_OFFSET		0x1F00
+#define CONFIG_SYS_FACT_SIZE		0x0100
+/* later: #define CONFIG_MISC_INIT_R */
+/* define the next only if you want to allow users to enter VPD data */
+#define CONFIG_SYS_FACT_ENTRY
+#ifndef __ASSEMBLY__
+extern void read_factory_r(void);
+#endif
+
+/*
+ * Only interrupt autoboot if <space> is pressed. Otherwise, garbage
+ * data on the serial line may interrupt the boot sequence.
+ */
+#define CONFIG_BOOTDELAY		1
+#define CONFIG_AUTOBOOT
+#define CONFIG_AUTOBOOT_KEYED
+#define CONFIG_AUTOBOOT_PROMPT \
+	"Press SPACE to abort autoboot in %d seconds\n", bootdelay
+#define CONFIG_AUTOBOOT_DELAY_STR	"d"
+#define CONFIG_AUTOBOOT_STOP_STR	" "
+
+/*
+ * add filesystem commands if we have at least 1 storage
+ * media with filesystem
+ */
+#if defined(CONFIG_NAND_ATMEL) \
+	|| defined(CONFIG_USB_ATMEL) \
+	|| defined(CONFIG_MMC)
+# define CONFIG_DOS_PARTITION
+# define CONFIG_CMD_FAT
+# define CONFIG_CMD_EXT2
+/* later: #define CONFIG_CMD_JFFS2 */
+#endif
+
+/* add NET commands if we have at least 1 LAN */
+#if defined(CONFIG_MACB) || defined(CONFIG_ENC28J60)
+# define CONFIG_CMD_PING
+# define CONFIG_CMD_DHCP
+# define CONFIG_CMD_MII
+/* is this really needed ? */
+# define CONFIG_RESET_PHY_R
+/* BOOTP options */
+# define CONFIG_BOOTP_BOOTFILESIZE
+# define CONFIG_BOOTP_BOOTPATH
+# define CONFIG_BOOTP_GATEWAY
+# define CONFIG_BOOTP_HOSTNAME
+#endif
+
+/* linux in NAND flash */
+#define CONFIG_BOOTCOUNT_LIMIT	1
+#define CONFIG_BOOTCOMMAND \
+	"nand read 0x21000000 0xA0000 0x200000; bootm"
+#define CONFIG_BOOTARGS \
+	"console=ttyS0,115200 " \
+	"root=/dev/mtdblock2 " \
+	"mtdparts=atmel_nand:" \
+		"640k(uboot)ro," \
+		"2M(linux)," \
+		"16M(root)," \
+		"-(rest) " \
+	"rw "\
+	"rootfstype=jffs2"
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN \
+	ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
+#define CONFIG_STACKSIZE		(32*1024)
+#ifdef CONFIG_USE_IRQ
+#error CONFIG_USE_IRQ not supported
+#endif
+
+#endif
+
diff --git a/include/configs/xpedite537x.h b/include/configs/xpedite537x.h
index e0a1fa406c..a74766dcec 100644
--- a/include/configs/xpedite537x.h
+++ b/include/configs/xpedite537x.h
@@ -375,6 +375,16 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #define CONFIG_MII_DEFAULT_TSEC	1	/* Allow unregistered phys */
 #define CONFIG_ETHPRIME		"eTSEC2"
 
+/*
+ * In-band SGMII auto-negotiation between TBI and BCM5482S PHY fails, force
+ * 1000mbps SGMII link
+ */
+#define CONFIG_TSEC_TBICR_SETTINGS ( \
+		TBICR_PHY_RESET \
+		| TBICR_FULL_DUPLEX \
+		| TBICR_SPEED1_SET \
+		)
+
 #define CONFIG_TSEC1		1
 #define CONFIG_TSEC1_NAME	"eTSEC1"
 #define TSEC1_FLAGS		(TSEC_GIGABIT | TSEC_REDUCED)
diff --git a/include/configs/xpedite550x.h b/include/configs/xpedite550x.h
index 42d1f6980e..a051913ffb 100644
--- a/include/configs/xpedite550x.h
+++ b/include/configs/xpedite550x.h
@@ -345,6 +345,16 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #define CONFIG_MII_DEFAULT_TSEC	1	/* Allow unregistered phys */
 #define CONFIG_ETHPRIME		"eTSEC2"
 
+/*
+ * In-band SGMII auto-negotiation between TBI and BCM5482S PHY fails, force
+ * 1000mbps SGMII link
+ */
+#define CONFIG_TSEC_TBICR_SETTINGS ( \
+		TBICR_PHY_RESET \
+		| TBICR_FULL_DUPLEX \
+		| TBICR_SPEED1_SET \
+		)
+
 #define CONFIG_TSEC1		1
 #define CONFIG_TSEC1_NAME	"eTSEC1"
 #define TSEC1_FLAGS		(TSEC_GIGABIT | TSEC_REDUCED)
diff --git a/include/linux/mii.h b/include/linux/mii.h
index 7c63095fd4..6e7ffab301 100644
--- a/include/linux/mii.h
+++ b/include/linux/mii.h
@@ -10,98 +10,132 @@
 
 /* Generic MII registers. */
 
-#define MII_BMCR	    0x00	/* Basic mode control register */
-#define MII_BMSR	    0x01	/* Basic mode status register  */
-#define MII_PHYSID1	    0x02	/* PHYS ID 1		       */
-#define MII_PHYSID2	    0x03	/* PHYS ID 2		       */
-#define MII_ADVERTISE	    0x04	/* Advertisement control reg   */
-#define MII_LPA		    0x05	/* Link partner ability reg    */
-#define MII_EXPANSION	    0x06	/* Expansion register	       */
-#define MII_DCOUNTER	    0x12	/* Disconnect counter	       */
-#define MII_FCSCOUNTER	    0x13	/* False carrier counter       */
-#define MII_NWAYTEST	    0x14	/* N-way auto-neg test reg     */
-#define MII_RERRCOUNTER     0x15	/* Receive error counter       */
-#define MII_SREVISION	    0x16	/* Silicon revision	       */
-#define MII_RESV1	    0x17	/* Reserved...		       */
-#define MII_LBRERROR	    0x18	/* Lpback, rx, bypass error    */
-#define MII_PHYADDR	    0x19	/* PHY address		       */
-#define MII_RESV2	    0x1a	/* Reserved...		       */
-#define MII_TPISTATUS	    0x1b	/* TPI status for 10mbps       */
-#define MII_NCONFIG	    0x1c	/* Network interface config    */
+#define MII_BMCR            0x00        /* Basic mode control register */
+#define MII_BMSR            0x01        /* Basic mode status register  */
+#define MII_PHYSID1         0x02        /* PHYS ID 1                   */
+#define MII_PHYSID2         0x03        /* PHYS ID 2                   */
+#define MII_ADVERTISE       0x04        /* Advertisement control reg   */
+#define MII_LPA             0x05        /* Link partner ability reg    */
+#define MII_EXPANSION       0x06        /* Expansion register          */
+#define MII_CTRL1000        0x09        /* 1000BASE-T control          */
+#define MII_STAT1000        0x0a        /* 1000BASE-T status           */
+#define MII_ESTATUS	    0x0f	/* Extended Status */
+#define MII_DCOUNTER        0x12        /* Disconnect counter          */
+#define MII_FCSCOUNTER      0x13        /* False carrier counter       */
+#define MII_NWAYTEST        0x14        /* N-way auto-neg test reg     */
+#define MII_RERRCOUNTER     0x15        /* Receive error counter       */
+#define MII_SREVISION       0x16        /* Silicon revision            */
+#define MII_RESV1           0x17        /* Reserved...                 */
+#define MII_LBRERROR        0x18        /* Lpback, rx, bypass error    */
+#define MII_PHYADDR         0x19        /* PHY address                 */
+#define MII_RESV2           0x1a        /* Reserved...                 */
+#define MII_TPISTATUS       0x1b        /* TPI status for 10mbps       */
+#define MII_NCONFIG         0x1c        /* Network interface config    */
 
 /* Basic mode control register. */
-#define BMCR_RESV		0x003f	/* Unused...		       */
-#define BMCR_SPEED1000		0x0040	/* MSB of Speed (1000)	       */
-#define BMCR_CTST		0x0080	/* Collision test	       */
-#define BMCR_FULLDPLX		0x0100	/* Full duplex		       */
-#define BMCR_ANRESTART		0x0200	/* Auto negotiation restart    */
-#define BMCR_ISOLATE		0x0400	/* Disconnect DP83840 from MII */
-#define BMCR_PDOWN		0x0800	/* Powerdown the DP83840       */
-#define BMCR_ANENABLE		0x1000	/* Enable auto negotiation     */
-#define BMCR_SPEED100		0x2000	/* Select 100Mbps	       */
-#define BMCR_LOOPBACK		0x4000	/* TXD loopback bits	       */
-#define BMCR_RESET		0x8000	/* Reset the DP83840	       */
+#define BMCR_RESV               0x003f  /* Unused...                   */
+#define BMCR_SPEED1000		0x0040  /* MSB of Speed (1000)         */
+#define BMCR_CTST               0x0080  /* Collision test              */
+#define BMCR_FULLDPLX           0x0100  /* Full duplex                 */
+#define BMCR_ANRESTART          0x0200  /* Auto negotiation restart    */
+#define BMCR_ISOLATE            0x0400  /* Disconnect DP83840 from MII */
+#define BMCR_PDOWN              0x0800  /* Powerdown the DP83840       */
+#define BMCR_ANENABLE           0x1000  /* Enable auto negotiation     */
+#define BMCR_SPEED100           0x2000  /* Select 100Mbps              */
+#define BMCR_LOOPBACK           0x4000  /* TXD loopback bits           */
+#define BMCR_RESET              0x8000  /* Reset the DP83840           */
 
 /* Basic mode status register. */
-#define BMSR_ERCAP		0x0001	/* Ext-reg capability	       */
-#define BMSR_JCD		0x0002	/* Jabber detected	       */
-#define BMSR_LSTATUS		0x0004	/* Link status		       */
-#define BMSR_ANEGCAPABLE	0x0008	/* Able to do auto-negotiation */
-#define BMSR_RFAULT		0x0010	/* Remote fault detected       */
-#define BMSR_ANEGCOMPLETE	0x0020	/* Auto-negotiation complete   */
-#define BMSR_RESV		0x07c0	/* Unused...		       */
-#define BMSR_10HALF		0x0800	/* Can do 10mbps, half-duplex  */
-#define BMSR_10FULL		0x1000	/* Can do 10mbps, full-duplex  */
-#define BMSR_100HALF		0x2000	/* Can do 100mbps, half-duplex */
-#define BMSR_100FULL		0x4000	/* Can do 100mbps, full-duplex */
-#define BMSR_100BASE4		0x8000	/* Can do 100mbps, 4k packets  */
+#define BMSR_ERCAP              0x0001  /* Ext-reg capability          */
+#define BMSR_JCD                0x0002  /* Jabber detected             */
+#define BMSR_LSTATUS            0x0004  /* Link status                 */
+#define BMSR_ANEGCAPABLE        0x0008  /* Able to do auto-negotiation */
+#define BMSR_RFAULT             0x0010  /* Remote fault detected       */
+#define BMSR_ANEGCOMPLETE       0x0020  /* Auto-negotiation complete   */
+#define BMSR_RESV               0x00c0  /* Unused...                   */
+#define BMSR_ESTATEN		0x0100	/* Extended Status in R15 */
+#define BMSR_100HALF2           0x0200  /* Can do 100BASE-T2 HDX */
+#define BMSR_100FULL2           0x0400  /* Can do 100BASE-T2 FDX */
+#define BMSR_10HALF             0x0800  /* Can do 10mbps, half-duplex  */
+#define BMSR_10FULL             0x1000  /* Can do 10mbps, full-duplex  */
+#define BMSR_100HALF            0x2000  /* Can do 100mbps, half-duplex */
+#define BMSR_100FULL            0x4000  /* Can do 100mbps, full-duplex */
+#define BMSR_100BASE4           0x8000  /* Can do 100mbps, 4k packets  */
 
 /* Advertisement control register. */
-#define ADVERTISE_SLCT		0x001f	/* Selector bits	       */
-#define ADVERTISE_CSMA		0x0001	/* Only selector supported     */
-#define ADVERTISE_10HALF	0x0020	/* Try for 10mbps half-duplex  */
-#define ADVERTISE_10FULL	0x0040	/* Try for 10mbps full-duplex  */
-#define ADVERTISE_100HALF	0x0080	/* Try for 100mbps half-duplex */
-#define ADVERTISE_100FULL	0x0100	/* Try for 100mbps full-duplex */
-#define ADVERTISE_100BASE4	0x0200	/* Try for 100mbps 4k packets  */
-#define ADVERTISE_RESV		0x1c00	/* Unused...		       */
-#define ADVERTISE_RFAULT	0x2000	/* Say we can detect faults    */
-#define ADVERTISE_LPACK		0x4000	/* Ack link partners response  */
-#define ADVERTISE_NPAGE		0x8000	/* Next page bit	       */
+#define ADVERTISE_SLCT          0x001f  /* Selector bits               */
+#define ADVERTISE_CSMA          0x0001  /* Only selector supported     */
+#define ADVERTISE_10HALF        0x0020  /* Try for 10mbps half-duplex  */
+#define ADVERTISE_1000XFULL     0x0020  /* Try for 1000BASE-X full-duplex */
+#define ADVERTISE_10FULL        0x0040  /* Try for 10mbps full-duplex  */
+#define ADVERTISE_1000XHALF     0x0040  /* Try for 1000BASE-X half-duplex */
+#define ADVERTISE_100HALF       0x0080  /* Try for 100mbps half-duplex */
+#define ADVERTISE_1000XPAUSE    0x0080  /* Try for 1000BASE-X pause    */
+#define ADVERTISE_100FULL       0x0100  /* Try for 100mbps full-duplex */
+#define ADVERTISE_1000XPSE_ASYM 0x0100  /* Try for 1000BASE-X asym pause */
+#define ADVERTISE_100BASE4      0x0200  /* Try for 100mbps 4k packets  */
+#define ADVERTISE_PAUSE_CAP     0x0400  /* Try for pause               */
+#define ADVERTISE_PAUSE_ASYM    0x0800  /* Try for asymetric pause     */
+#define ADVERTISE_RESV          0x1000  /* Unused...                   */
+#define ADVERTISE_RFAULT        0x2000  /* Say we can detect faults    */
+#define ADVERTISE_LPACK         0x4000  /* Ack link partners response  */
+#define ADVERTISE_NPAGE         0x8000  /* Next page bit               */
 
 #define ADVERTISE_FULL (ADVERTISE_100FULL | ADVERTISE_10FULL | \
 			ADVERTISE_CSMA)
 #define ADVERTISE_ALL (ADVERTISE_10HALF | ADVERTISE_10FULL | \
-		       ADVERTISE_100HALF | ADVERTISE_100FULL)
+                       ADVERTISE_100HALF | ADVERTISE_100FULL)
 
 /* Link partner ability register. */
-#define LPA_SLCT		0x001f	/* Same as advertise selector  */
-#define LPA_10HALF		0x0020	/* Can do 10mbps half-duplex   */
-#define LPA_10FULL		0x0040	/* Can do 10mbps full-duplex   */
-#define LPA_100HALF		0x0080	/* Can do 100mbps half-duplex  */
-#define LPA_100FULL		0x0100	/* Can do 100mbps full-duplex  */
-#define LPA_100BASE4		0x0200	/* Can do 100mbps 4k packets   */
-#define LPA_RESV		0x1c00	/* Unused...		       */
-#define LPA_RFAULT		0x2000	/* Link partner faulted        */
-#define LPA_LPACK		0x4000	/* Link partner acked us       */
-#define LPA_NPAGE		0x8000	/* Next page bit	       */
+#define LPA_SLCT                0x001f  /* Same as advertise selector  */
+#define LPA_10HALF              0x0020  /* Can do 10mbps half-duplex   */
+#define LPA_1000XFULL           0x0020  /* Can do 1000BASE-X full-duplex */
+#define LPA_10FULL              0x0040  /* Can do 10mbps full-duplex   */
+#define LPA_1000XHALF           0x0040  /* Can do 1000BASE-X half-duplex */
+#define LPA_100HALF             0x0080  /* Can do 100mbps half-duplex  */
+#define LPA_1000XPAUSE          0x0080  /* Can do 1000BASE-X pause     */
+#define LPA_100FULL             0x0100  /* Can do 100mbps full-duplex  */
+#define LPA_1000XPAUSE_ASYM     0x0100  /* Can do 1000BASE-X pause asym*/
+#define LPA_100BASE4            0x0200  /* Can do 100mbps 4k packets   */
+#define LPA_PAUSE_CAP           0x0400  /* Can pause                   */
+#define LPA_PAUSE_ASYM          0x0800  /* Can pause asymetrically     */
+#define LPA_RESV                0x1000  /* Unused...                   */
+#define LPA_RFAULT              0x2000  /* Link partner faulted        */
+#define LPA_LPACK               0x4000  /* Link partner acked us       */
+#define LPA_NPAGE               0x8000  /* Next page bit               */
 
 #define LPA_DUPLEX		(LPA_10FULL | LPA_100FULL)
 #define LPA_100			(LPA_100FULL | LPA_100HALF | LPA_100BASE4)
 
 /* Expansion register for auto-negotiation. */
-#define EXPANSION_NWAY		0x0001	/* Can do N-way auto-nego      */
-#define EXPANSION_LCWP		0x0002	/* Got new RX page code word   */
-#define EXPANSION_ENABLENPAGE	0x0004	/* This enables npage words    */
-#define EXPANSION_NPCAPABLE	0x0008	/* Link partner supports npage */
-#define EXPANSION_MFAULTS	0x0010	/* Multiple faults detected    */
-#define EXPANSION_RESV		0xffe0	/* Unused...		       */
+#define EXPANSION_NWAY          0x0001  /* Can do N-way auto-nego      */
+#define EXPANSION_LCWP          0x0002  /* Got new RX page code word   */
+#define EXPANSION_ENABLENPAGE   0x0004  /* This enables npage words    */
+#define EXPANSION_NPCAPABLE     0x0008  /* Link partner supports npage */
+#define EXPANSION_MFAULTS       0x0010  /* Multiple faults detected    */
+#define EXPANSION_RESV          0xffe0  /* Unused...                   */
+
+#define ESTATUS_1000_TFULL	0x2000	/* Can do 1000BT Full */
+#define ESTATUS_1000_THALF	0x1000	/* Can do 1000BT Half */
 
 /* N-way test register. */
-#define NWAYTEST_RESV1		0x00ff	/* Unused...		       */
-#define NWAYTEST_LOOPBACK	0x0100	/* Enable loopback for N-way   */
-#define NWAYTEST_RESV2		0xfe00	/* Unused...		       */
+#define NWAYTEST_RESV1          0x00ff  /* Unused...                   */
+#define NWAYTEST_LOOPBACK       0x0100  /* Enable loopback for N-way   */
+#define NWAYTEST_RESV2          0xfe00  /* Unused...                   */
+
+/* 1000BASE-T Control register */
+#define ADVERTISE_1000FULL      0x0200  /* Advertise 1000BASE-T full duplex */
+#define ADVERTISE_1000HALF      0x0100  /* Advertise 1000BASE-T half duplex */
 
+/* 1000BASE-T Status register */
+#define LPA_1000LOCALRXOK       0x2000  /* Link partner local receiver status */
+#define LPA_1000REMRXOK         0x1000  /* Link partner remote receiver status */
+#define LPA_1000FULL            0x0800  /* Link partner 1000BASE-T full duplex */
+#define LPA_1000HALF            0x0400  /* Link partner 1000BASE-T half duplex */
+
+/* Flow control flags */
+#define FLOW_CTRL_TX		0x01
+#define FLOW_CTRL_RX		0x02
 
 /**
  * mii_nway_result
@@ -114,7 +148,7 @@
  *
  * The one exception to IEEE 802.3u is that 100baseT4 is placed
  * between 100T-full and 100T-half.  If your phy does not support
- * 100T4 this is fine.	If your phy places 100T4 elsewhere in the
+ * 100T4 this is fine. If your phy places 100T4 elsewhere in the
  * priority order, you will need to roll your own function.
  */
 static inline unsigned int mii_nway_result (unsigned int negotiated)
@@ -154,5 +188,4 @@ static inline unsigned int mii_duplex (unsigned int duplex_lock,
 	return 0;
 }
 
-
 #endif /* __LINUX_MII_H__ */
diff --git a/include/pci_ids.h b/include/pci_ids.h
index dcc381d301..cb8398d2c0 100644
--- a/include/pci_ids.h
+++ b/include/pci_ids.h
@@ -882,6 +882,7 @@
 #define PCI_DEVICE_ID_PLX_SPCOM200	0x1103
 #define PCI_DEVICE_ID_PLX_DJINN_ITOO	0x1151
 #define PCI_DEVICE_ID_PLX_R753		0x1152
+#define PCI_DEVICE_ID_PLX_9030		0x9030
 #define PCI_DEVICE_ID_PLX_9050		0x9050
 #define PCI_DEVICE_ID_PLX_9060		0x9060
 #define PCI_DEVICE_ID_PLX_9060ES	0x906E
diff --git a/include/post.h b/include/post.h
index 957ce3b161..519cef1612 100644
--- a/include/post.h
+++ b/include/post.h
@@ -58,11 +58,13 @@
 
 #elif defined (CONFIG_MPC85xx)
 #include <asm/immap_85xx.h>
-#define _POST_WORD_ADDR	(CONFIG_SYS_IMMR + offsetof(ccsr_pic_t, tfrr))
+#define _POST_WORD_ADDR	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_PIC_OFFSET + \
+				offsetof(ccsr_pic_t, tfrr))
 
 #elif defined (CONFIG_MPC86xx)
 #include <asm/immap_86xx.h>
-#define _POST_WORD_ADDR	(CONFIG_SYS_IMMR + offsetof(ccsr_pic_t, tfrr))
+#define _POST_WORD_ADDR	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC86xx_PIC_OFFSET + \
+				offsetof(ccsr_pic_t, tfrr))
 
 #elif defined (CONFIG_4xx)
 #define _POST_WORD_ADDR \