Merge branch 'master' of git://git.denx.de/u-boot-arm

Albert's rework of the linker scripts conflicted with Simon's making
everyone use __bss_end.  We also had a minor conflict over
README.scrapyard being added to in mainline and enhanced in
u-boot-arm/master with proper formatting.

Conflicts:
	arch/arm/cpu/ixp/u-boot.lds
	arch/arm/cpu/u-boot.lds
	arch/arm/lib/Makefile
	board/actux1/u-boot.lds
	board/actux2/u-boot.lds
	board/actux3/u-boot.lds
	board/dvlhost/u-boot.lds
	board/freescale/mx31ads/u-boot.lds
	doc/README.scrapyard
	include/configs/tegra-common.h

Build tested for all of ARM and run-time tested on am335x_evm.

Signed-off-by: Tom Rini <trini@ti.com>

1 files changed, 29 insertions, 10 deletions

diff --git a/arch/arm/cpu/arm926ejs/mxs/timer.c b/arch/arm/cpu/arm926ejs/mxs/timer.c
index 373841180f..2039106e40 100644
--- a/arch/arm/cpu/arm926ejs/mxs/timer.c
+++ b/arch/arm/cpu/arm926ejs/mxs/timer.c
@@ -32,7 +32,11 @@
 #include <asm/arch/sys_proto.h>
 
 /* Maximum fixed count */
-#define TIMER_LOAD_VAL	0xffffffff
+#if defined(CONFIG_MX23)
+#define TIMER_LOAD_VAL 0xffff
+#elif defined(CONFIG_MX28)
+#define TIMER_LOAD_VAL 0xffffffff
+#endif
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -42,22 +46,22 @@ DECLARE_GLOBAL_DATA_PTR;
 /*
  * This driver uses 1kHz clock source.
  */
-#define	MX28_INCREMENTER_HZ		1000
+#define	MXS_INCREMENTER_HZ		1000
 
 static inline unsigned long tick_to_time(unsigned long tick)
 {
-	return tick / (MX28_INCREMENTER_HZ / CONFIG_SYS_HZ);
+	return tick / (MXS_INCREMENTER_HZ / CONFIG_SYS_HZ);
 }
 
 static inline unsigned long time_to_tick(unsigned long time)
 {
-	return time * (MX28_INCREMENTER_HZ / CONFIG_SYS_HZ);
+	return time * (MXS_INCREMENTER_HZ / CONFIG_SYS_HZ);
 }
 
 /* Calculate how many ticks happen in "us" microseconds */
 static inline unsigned long us_to_tick(unsigned long us)
 {
-	return (us * MX28_INCREMENTER_HZ) / 1000000;
+	return (us * MXS_INCREMENTER_HZ) / 1000000;
 }
 
 int timer_init(void)
@@ -69,7 +73,11 @@ int timer_init(void)
 	mxs_reset_block(&timrot_regs->hw_timrot_rotctrl_reg);
 
 	/* Set fixed_count to 0 */
+#if defined(CONFIG_MX23)
+	writel(0, &timrot_regs->hw_timrot_timcount0);
+#elif defined(CONFIG_MX28)
 	writel(0, &timrot_regs->hw_timrot_fixed_count0);
+#endif
 
 	/* Set UPDATE bit and 1Khz frequency */
 	writel(TIMROT_TIMCTRLn_UPDATE | TIMROT_TIMCTRLn_RELOAD |
@@ -77,7 +85,11 @@ int timer_init(void)
 		&timrot_regs->hw_timrot_timctrl0);
 
 	/* Set fixed_count to maximal value */
+#if defined(CONFIG_MX23)
+	writel(TIMER_LOAD_VAL - 1, &timrot_regs->hw_timrot_timcount0);
+#elif defined(CONFIG_MX28)
 	writel(TIMER_LOAD_VAL, &timrot_regs->hw_timrot_fixed_count0);
+#endif
 
 	return 0;
 }
@@ -86,9 +98,16 @@ unsigned long long get_ticks(void)
 {
 	struct mxs_timrot_regs *timrot_regs =
 		(struct mxs_timrot_regs *)MXS_TIMROT_BASE;
+	uint32_t now;
 
 	/* Current tick value */
-	uint32_t now = readl(&timrot_regs->hw_timrot_running_count0);
+#if defined(CONFIG_MX23)
+	/* Upper bits are the valid ones. */
+	now = readl(&timrot_regs->hw_timrot_timcount0) >>
+		TIMROT_RUNNING_COUNTn_RUNNING_COUNT_OFFSET;
+#elif defined(CONFIG_MX28)
+	now = readl(&timrot_regs->hw_timrot_running_count0);
+#endif
 
 	if (lastdec >= now) {
 		/*
@@ -117,17 +136,17 @@ ulong get_timer(ulong base)
 }
 
 /* We use the HW_DIGCTL_MICROSECONDS register for sub-millisecond timer. */
-#define	MX28_HW_DIGCTL_MICROSECONDS	0x8001c0c0
+#define	MXS_HW_DIGCTL_MICROSECONDS	0x8001c0c0
 
 void __udelay(unsigned long usec)
 {
 	uint32_t old, new, incr;
 	uint32_t counter = 0;
 
-	old = readl(MX28_HW_DIGCTL_MICROSECONDS);
+	old = readl(MXS_HW_DIGCTL_MICROSECONDS);
 
 	while (counter < usec) {
-		new = readl(MX28_HW_DIGCTL_MICROSECONDS);
+		new = readl(MXS_HW_DIGCTL_MICROSECONDS);
 
 		/* Check if the timer wrapped. */
 		if (new < old) {
@@ -152,5 +171,5 @@ void __udelay(unsigned long usec)
 
 ulong get_tbclk(void)
 {
-	return MX28_INCREMENTER_HZ;
+	return MXS_INCREMENTER_HZ;
 }