Merge branch 'master' of git://git.denx.de/u-boot-i2c

The sandburst-specific i2c drivers have been deleted, conflict was just
over the SPDX conversion.

Conflicts:
	board/sandburst/common/ppc440gx_i2c.c
	board/sandburst/common/ppc440gx_i2c.h

Signed-off-by: Tom Rini <trini@ti.com>

321 files changed, 3124 insertions, 2620 deletions

diff --git a/README b/README
index ba9be2be57..a5c3e8dcf7 100644
--- a/README
+++ b/README
@@ -1928,11 +1928,114 @@ CBFS (Coreboot Filesystem) support
 		on those systems that support this (optional)
 		feature, like the TQM8xxL modules.
 
-- I2C Support:	CONFIG_HARD_I2C | CONFIG_SOFT_I2C
-
-		These enable I2C serial bus commands. Defining either of
-		(but not both of) CONFIG_HARD_I2C or CONFIG_SOFT_I2C will
-		include the appropriate I2C driver for the selected CPU.
+- I2C Support:	CONFIG_SYS_I2C
+
+		This enable the NEW i2c subsystem, and will allow you to use
+		i2c commands at the u-boot command line (as long as you set
+		CONFIG_CMD_I2C in CONFIG_COMMANDS) and communicate with i2c
+		based realtime clock chips or other i2c devices. See
+		common/cmd_i2c.c for a description of the command line
+		interface.
+
+		ported i2c driver to the new framework:
+		- drivers/i2c/soft_i2c.c:
+		  - activate first bus with CONFIG_SYS_I2C_SOFT define
+		    CONFIG_SYS_I2C_SOFT_SPEED and CONFIG_SYS_I2C_SOFT_SLAVE
+		    for defining speed and slave address
+		  - activate second bus with I2C_SOFT_DECLARATIONS2 define
+		    CONFIG_SYS_I2C_SOFT_SPEED_2 and CONFIG_SYS_I2C_SOFT_SLAVE_2
+		    for defining speed and slave address
+		  - activate third bus with I2C_SOFT_DECLARATIONS3 define
+		    CONFIG_SYS_I2C_SOFT_SPEED_3 and CONFIG_SYS_I2C_SOFT_SLAVE_3
+		    for defining speed and slave address
+		  - activate fourth bus with I2C_SOFT_DECLARATIONS4 define
+		    CONFIG_SYS_I2C_SOFT_SPEED_4 and CONFIG_SYS_I2C_SOFT_SLAVE_4
+		    for defining speed and slave address
+
+		- drivers/i2c/fsl_i2c.c:
+		  - activate i2c driver with CONFIG_SYS_I2C_FSL
+		    define CONFIG_SYS_FSL_I2C_OFFSET for setting the register
+		    offset CONFIG_SYS_FSL_I2C_SPEED for the i2c speed and
+		    CONFIG_SYS_FSL_I2C_SLAVE for the slave addr of the first
+		    bus.
+                  - If your board supports a second fsl i2c bus, define
+		    CONFIG_SYS_FSL_I2C2_OFFSET for the register offset
+		    CONFIG_SYS_FSL_I2C2_SPEED for the speed and
+		    CONFIG_SYS_FSL_I2C2_SLAVE for the slave address of the
+		    second bus.
+
+		- drivers/i2c/tegra_i2c.c:
+		 - activate this driver with CONFIG_SYS_I2C_TEGRA
+		 - This driver adds 4 i2c buses with a fix speed from
+		   100000 and the slave addr 0!
+
+		- drivers/i2c/ppc4xx_i2c.c
+		  - activate this driver with CONFIG_SYS_I2C_PPC4XX
+		  - CONFIG_SYS_I2C_PPC4XX_CH0 activate hardware channel 0
+		  - CONFIG_SYS_I2C_PPC4XX_CH1 activate hardware channel 1
+
+		additional defines:
+
+		CONFIG_SYS_NUM_I2C_BUSES
+		Hold the number of i2c busses you want to use. If you
+		don't use/have i2c muxes on your i2c bus, this
+		is equal to CONFIG_SYS_NUM_I2C_ADAPTERS, and you can
+		omit this define.
+
+		CONFIG_SYS_I2C_DIRECT_BUS
+		define this, if you don't use i2c muxes on your hardware.
+		if CONFIG_SYS_I2C_MAX_HOPS is not defined or == 0 you can
+		omit this define.
+
+		CONFIG_SYS_I2C_MAX_HOPS
+		define how many muxes are maximal consecutively connected
+		on one i2c bus. If you not use i2c muxes, omit this
+		define.
+
+		CONFIG_SYS_I2C_BUSES
+		hold a list of busses you want to use, only used if
+		CONFIG_SYS_I2C_DIRECT_BUS is not defined, for example
+		a board with CONFIG_SYS_I2C_MAX_HOPS = 1 and
+		CONFIG_SYS_NUM_I2C_BUSES = 9:
+
+		 CONFIG_SYS_I2C_BUSES	{{0, {I2C_NULL_HOP}}, \
+					{0, {{I2C_MUX_PCA9547, 0x70, 1}}}, \
+					{0, {{I2C_MUX_PCA9547, 0x70, 2}}}, \
+					{0, {{I2C_MUX_PCA9547, 0x70, 3}}}, \
+					{0, {{I2C_MUX_PCA9547, 0x70, 4}}}, \
+					{0, {{I2C_MUX_PCA9547, 0x70, 5}}}, \
+					{1, {I2C_NULL_HOP}}, \
+					{1, {{I2C_MUX_PCA9544, 0x72, 1}}}, \
+					{1, {{I2C_MUX_PCA9544, 0x72, 2}}}, \
+					}
+
+		which defines
+			bus 0 on adapter 0 without a mux
+			bus 1 on adapter 0 with a PCA9547 on address 0x70 port 1
+			bus 2 on adapter 0 with a PCA9547 on address 0x70 port 2
+			bus 3 on adapter 0 with a PCA9547 on address 0x70 port 3
+			bus 4 on adapter 0 with a PCA9547 on address 0x70 port 4
+			bus 5 on adapter 0 with a PCA9547 on address 0x70 port 5
+			bus 6 on adapter 1 without a mux
+			bus 7 on adapter 1 with a PCA9544 on address 0x72 port 1
+			bus 8 on adapter 1 with a PCA9544 on address 0x72 port 2
+
+		If you do not have i2c muxes on your board, omit this define.
+
+- Legacy I2C Support:	CONFIG_HARD_I2C
+
+		NOTE: It is intended to move drivers to CONFIG_SYS_I2C which
+		provides the following compelling advantages:
+
+		- more than one i2c adapter is usable
+		- approved multibus support
+		- better i2c mux support
+
+		** Please consider updating your I2C driver now. **
+
+		These enable legacy I2C serial bus commands. Defining
+		CONFIG_HARD_I2C will include the appropriate I2C driver
+		for the selected CPU.
 
 		This will allow you to use i2c commands at the u-boot
 		command line (as long as you set CONFIG_CMD_I2C in
@@ -1942,12 +2045,8 @@ CBFS (Coreboot Filesystem) support
 
 		CONFIG_HARD_I2C selects a hardware I2C controller.
 
-		CONFIG_SOFT_I2C configures u-boot to use a software (aka
-		bit-banging) driver instead of CPM or similar hardware
-		support for I2C.
-
 		There are several other quantities that must also be
-		defined when you define CONFIG_HARD_I2C or CONFIG_SOFT_I2C.
+		defined when you define CONFIG_HARD_I2C.
 
 		In both cases you will need to define CONFIG_SYS_I2C_SPEED
 		to be the frequency (in Hz) at which you wish your i2c bus
@@ -1969,7 +2068,7 @@ CBFS (Coreboot Filesystem) support
 
 		That's all that's required for CONFIG_HARD_I2C.
 
-		If you use the software i2c interface (CONFIG_SOFT_I2C)
+		If you use the software i2c interface (CONFIG_SYS_I2C_SOFT)
 		then the following macros need to be defined (examples are
 		from include/configs/lwmon.h):
 
@@ -2120,58 +2219,6 @@ CBFS (Coreboot Filesystem) support
 		If not defined, then U-Boot uses predefined value for
 		specified DTT device.
 
-		CONFIG_FSL_I2C
-
-		Define this option if you want to use Freescale's I2C driver in
-		drivers/i2c/fsl_i2c.c.
-
-		CONFIG_I2C_MUX
-
-		Define this option if you have I2C devices reached over 1 .. n
-		I2C Muxes like the pca9544a. This option addes a new I2C
-		Command "i2c bus [muxtype:muxaddr:muxchannel]" which adds a
-		new I2C Bus to the existing I2C Busses. If you select the
-		new Bus with "i2c dev", u-bbot sends first the commandos for
-		the muxes to activate this new "bus".
-
-		CONFIG_I2C_MULTI_BUS must be also defined, to use this
-		feature!
-
-		Example:
-		Adding a new I2C Bus reached over 2 pca9544a muxes
-			The First mux with address 70 and channel 6
-			The Second mux with address 71 and channel 4
-
-		=> i2c bus pca9544a:70:6:pca9544a:71:4
-
-		Use the "i2c bus" command without parameter, to get a list
-		of I2C Busses with muxes:
-
-		=> i2c bus
-		Busses reached over muxes:
-		Bus ID: 2
-		  reached over Mux(es):
-		    pca9544a@70 ch: 4
-		Bus ID: 3
-		  reached over Mux(es):
-		    pca9544a@70 ch: 6
-		    pca9544a@71 ch: 4
-		=>
-
-		If you now switch to the new I2C Bus 3 with "i2c dev 3"
-		u-boot first sends the command to the mux@70 to enable
-		channel 6, and then the command to the mux@71 to enable
-		the channel 4.
-
-		After that, you can use the "normal" i2c commands as
-		usual to communicate with your I2C devices behind
-		the 2 muxes.
-
-		This option is actually implemented for the bitbanging
-		algorithm in common/soft_i2c.c and for the Hardware I2C
-		Bus on the MPC8260. But it should be not so difficult
-		to add this option to other architectures.
-
 		CONFIG_SOFT_I2C_READ_REPEATED_START
 
 		defining this will force the i2c_read() function in
@@ -3588,7 +3635,7 @@ to save the current settings.
 	  I2C muxes, you can define here, how to reach this
 	  EEPROM. For example:
 
-	  #define CONFIG_I2C_ENV_EEPROM_BUS	  "pca9547:70:d\0"
+	  #define CONFIG_I2C_ENV_EEPROM_BUS	  1
 
 	  EEPROM which holds the environment, is reached over
 	  a pca9547 i2c mux with address 0x70, channel 3.
diff --git a/arch/arm/cpu/armv7/vf610/generic.c b/arch/arm/cpu/armv7/vf610/generic.c
index 48dd60aa69..a26d63ebe0 100644
--- a/arch/arm/cpu/armv7/vf610/generic.c
+++ b/arch/arm/cpu/armv7/vf610/generic.c
@@ -191,6 +191,11 @@ u32 get_fec_clk(void)
 	return freq;
 }
 
+static u32 get_i2c_clk(void)
+{
+	return get_ipg_clk();
+}
+
 unsigned int mxc_get_clock(enum mxc_clock clk)
 {
 	switch (clk) {
@@ -206,6 +211,8 @@ unsigned int mxc_get_clock(enum mxc_clock clk)
 		return get_sdhc_clk();
 	case MXC_FEC_CLK:
 		return get_fec_clk();
+	case MXC_I2C_CLK:
+		return get_i2c_clk();
 	default:
 		break;
 	}
diff --git a/arch/arm/include/asm/arch-kirkwood/config.h b/arch/arm/include/asm/arch-kirkwood/config.h
index 78d144184a..197703b838 100644
--- a/arch/arm/include/asm/arch-kirkwood/config.h
+++ b/arch/arm/include/asm/arch-kirkwood/config.h
@@ -128,7 +128,7 @@
  * I2C related stuff
  */
 #ifdef CONFIG_CMD_I2C
-#ifndef CONFIG_SOFT_I2C
+#ifndef CONFIG_SYS_I2C_SOFT
 #define CONFIG_I2C_MVTWSI
 #endif
 #define CONFIG_SYS_I2C_SLAVE		0x0
diff --git a/arch/arm/include/asm/arch-vf610/clock.h b/arch/arm/include/asm/arch-vf610/clock.h
index 9b2e2b06dd..535adadd79 100644
--- a/arch/arm/include/asm/arch-vf610/clock.h
+++ b/arch/arm/include/asm/arch-vf610/clock.h
@@ -16,6 +16,7 @@ enum mxc_clock {
 	MXC_UART_CLK,
 	MXC_ESDHC_CLK,
 	MXC_FEC_CLK,
+	MXC_I2C_CLK,
 };
 
 void enable_ocotp_clk(unsigned char enable);
diff --git a/arch/arm/include/asm/arch-vf610/crm_regs.h b/arch/arm/include/asm/arch-vf610/crm_regs.h
index 8532ead237..85f1fda9f5 100644
--- a/arch/arm/include/asm/arch-vf610/crm_regs.h
+++ b/arch/arm/include/asm/arch-vf610/crm_regs.h
@@ -177,6 +177,7 @@ struct anadig_reg {
 #define CCM_CCGR4_WKUP_CTRL_MASK		(0x3 << 20)
 #define CCM_CCGR4_CCM_CTRL_MASK			(0x3 << 22)
 #define CCM_CCGR4_GPC_CTRL_MASK			(0x3 << 24)
+#define CCM_CCGR4_I2C0_CTRL_MASK		(0x3 << 12)
 #define CCM_CCGR6_OCOTP_CTRL_MASK		(0x3 << 10)
 #define CCM_CCGR6_DDRMC_CTRL_MASK		(0x3 << 28)
 #define CCM_CCGR7_SDHC1_CTRL_MASK		(0x3 << 4)
diff --git a/arch/arm/include/asm/arch-vf610/imx-regs.h b/arch/arm/include/asm/arch-vf610/imx-regs.h
index 9e42be9756..b8c877f939 100644
--- a/arch/arm/include/asm/arch-vf610/imx-regs.h
+++ b/arch/arm/include/asm/arch-vf610/imx-regs.h
@@ -90,6 +90,7 @@
 #define CONFIG_IOMUX_SHARE_CONF_REG
 
 #define FEC_QUIRK_ENET_MAC
+#define I2C_QUIRK_REG
 
 /* MSCM interrupt rounter */
 #define MSCM_IRSPRC_CP0_EN				1
diff --git a/arch/arm/include/asm/arch-vf610/iomux-vf610.h b/arch/arm/include/asm/arch-vf610/iomux-vf610.h
index 385a23effe..4a39eb0d60 100644
--- a/arch/arm/include/asm/arch-vf610/iomux-vf610.h
+++ b/arch/arm/include/asm/arch-vf610/iomux-vf610.h
@@ -17,6 +17,8 @@
 #define VF610_ENET_PAD_CTRL	(PAD_CTL_PUS_47K_UP | PAD_CTL_DSE_50ohm | \
 				PAD_CTL_OBE_IBE_ENABLE)
 #define VF610_DDR_PAD_CTRL	PAD_CTL_DSE_25ohm
+#define VF610_I2C_PAD_CTRL	(PAD_CTL_PUS_47K_UP | PAD_CTL_DSE_50ohm | \
+				PAD_CTL_SPEED_HIGH | PAD_CTL_OBE_IBE_ENABLE)
 
 enum {
 	VF610_PAD_PTA6__RMII0_CLKIN		= IOMUX_PAD(0x0000, 0x0000, 2, __NA_, 0, VF610_ENET_PAD_CTRL),
@@ -37,6 +39,8 @@ enum {
 	VF610_PAD_PTA27__ESDHC1_DAT1		= IOMUX_PAD(0x0044, 0x0044, 5, __NA_, 0, VF610_SDHC_PAD_CTRL),
 	VF610_PAD_PTA28__ESDHC1_DAT2		= IOMUX_PAD(0x0048, 0x0048, 5, __NA_, 0, VF610_SDHC_PAD_CTRL),
 	VF610_PAD_PTA29__ESDHC1_DAT3		= IOMUX_PAD(0x004c, 0x004c, 5, __NA_, 0, VF610_SDHC_PAD_CTRL),
+	VF610_PAD_PTB14__I2C0_SCL		= IOMUX_PAD(0x0090, 0x0090, 2, 0x033c, 1, VF610_I2C_PAD_CTRL),
+	VF610_PAD_PTB15__I2C0_SDA		= IOMUX_PAD(0x0094, 0x0094, 2, 0x0340, 1, VF610_I2C_PAD_CTRL),
 	VF610_PAD_DDR_A15__DDR_A_15		= IOMUX_PAD(0x0220, 0x0220, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
 	VF610_PAD_DDR_A14__DDR_A_14		= IOMUX_PAD(0x0224, 0x0224, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
 	VF610_PAD_DDR_A13__DDR_A_13		= IOMUX_PAD(0x0228, 0x0228, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
diff --git a/arch/arm/lib/board.c b/arch/arm/lib/board.c
index 7c1b021488..9c72a5353f 100644
--- a/arch/arm/lib/board.c
+++ b/arch/arm/lib/board.c
@@ -53,7 +53,7 @@ extern void dataflash_print_info(void);
 #endif
 
 #if defined(CONFIG_HARD_I2C) || \
-    defined(CONFIG_SOFT_I2C)
+	defined(CONFIG_SYS_I2C)
 #include <i2c.h>
 #endif
 
@@ -149,11 +149,15 @@ static int display_dram_config(void)
 	return (0);
 }
 
-#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
+#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SYS_I2C)
 static int init_func_i2c(void)
 {
 	puts("I2C:   ");
+#ifdef CONFIG_SYS_I2C
+	i2c_init_all();
+#else
 	i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+#endif
 	puts("ready\n");
 	return (0);
 }
@@ -252,7 +256,7 @@ init_fnc_t *init_sequence[] = {
 #if defined(CONFIG_DISPLAY_BOARDINFO)
 	checkboard,		/* display board info */
 #endif
-#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
+#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SYS_I2C)
 	init_func_i2c,
 #endif
 	dram_init,		/* configure available RAM banks */
diff --git a/arch/blackfin/lib/board.c b/arch/blackfin/lib/board.c
index f1d55470e8..10223bdb79 100644
--- a/arch/blackfin/lib/board.c
+++ b/arch/blackfin/lib/board.c
@@ -37,6 +37,10 @@
 int post_flag;
 #endif
 
+#if defined(CONFIG_SYS_I2C)
+#include <i2c.h>
+#endif
+
 DECLARE_GLOBAL_DATA_PTR;
 
 __attribute__((always_inline))
@@ -387,6 +391,9 @@ void board_init_r(gd_t * id, ulong dest_addr)
 	mmc_initialize(bd);
 #endif
 
+#if defined(CONFIG_SYS_I2C)
+	i2c_reloc_fixup();
+#endif
 	/* relocate environment function pointers etc. */
 	env_relocate();
 
diff --git a/arch/m68k/cpu/mcf5227x/cpu_init.c b/arch/m68k/cpu/mcf5227x/cpu_init.c
index 7e8f832fed..91b5fadc88 100644
--- a/arch/m68k/cpu/mcf5227x/cpu_init.c
+++ b/arch/m68k/cpu/mcf5227x/cpu_init.c
@@ -89,7 +89,7 @@ void cpu_init_f(void)
 	out_be32(&fbcs->csmr5, CONFIG_SYS_CS5_MASK);
 #endif
 
-#ifdef CONFIG_FSL_I2C
+#ifdef CONFIG_SYS_I2C_FSL
 	out_8(&gpio->par_i2c, GPIO_PAR_I2C_SCL_SCL | GPIO_PAR_I2C_SDA_SDA);
 #endif
 
diff --git a/arch/m68k/cpu/mcf5227x/speed.c b/arch/m68k/cpu/mcf5227x/speed.c
index 08e49906f5..44de4a6701 100644
--- a/arch/m68k/cpu/mcf5227x/speed.c
+++ b/arch/m68k/cpu/mcf5227x/speed.c
@@ -118,7 +118,7 @@ int get_clocks(void)
 		gd->bus_clk = gd->arch.flb_clk;
 	}
 
-#ifdef CONFIG_FSL_I2C
+#ifdef CONFIG_SYS_I2C_FSL
 	gd->arch.i2c1_clk = gd->bus_clk;
 #endif
 
diff --git a/arch/m68k/cpu/mcf523x/cpu_init.c b/arch/m68k/cpu/mcf523x/cpu_init.c
index 494c5495a5..5a789540fc 100644
--- a/arch/m68k/cpu/mcf523x/cpu_init.c
+++ b/arch/m68k/cpu/mcf523x/cpu_init.c
@@ -99,7 +99,7 @@ void cpu_init_f(void)
 	out_be32(&fbcs->csmr7, CONFIG_SYS_CS7_MASK);
 #endif
 
-#ifdef CONFIG_FSL_I2C
+#ifdef CONFIG_SYS_I2C_FSL
 	CONFIG_SYS_I2C_PINMUX_REG &= CONFIG_SYS_I2C_PINMUX_CLR;
 	CONFIG_SYS_I2C_PINMUX_REG |= CONFIG_SYS_I2C_PINMUX_SET;
 #endif
diff --git a/arch/m68k/cpu/mcf523x/speed.c b/arch/m68k/cpu/mcf523x/speed.c
index 5abd77149f..a4aa05b3fa 100644
--- a/arch/m68k/cpu/mcf523x/speed.c
+++ b/arch/m68k/cpu/mcf523x/speed.c
@@ -31,7 +31,7 @@ int get_clocks(void)
 	gd->bus_clk = CONFIG_SYS_CLK;
 	gd->cpu_clk = (gd->bus_clk * 2);
 
-#ifdef CONFIG_FSL_I2C
+#ifdef CONFIG_SYS_I2C_FSL
 	gd->arch.i2c1_clk = gd->bus_clk;
 #endif
 
diff --git a/arch/m68k/cpu/mcf52x2/cpu_init.c b/arch/m68k/cpu/mcf52x2/cpu_init.c
index dc703695d8..0882c3b8e5 100644
--- a/arch/m68k/cpu/mcf52x2/cpu_init.c
+++ b/arch/m68k/cpu/mcf52x2/cpu_init.c
@@ -212,7 +212,7 @@ void cpu_init_f(void)
 	/* FlexBus Chipselect */
 	init_fbcs();
 
-#ifdef CONFIG_FSL_I2C
+#ifdef CONFIG_SYS_I2C_FSL
 	CONFIG_SYS_I2C_PINMUX_REG =
 	    CONFIG_SYS_I2C_PINMUX_REG & CONFIG_SYS_I2C_PINMUX_CLR;
 	CONFIG_SYS_I2C_PINMUX_REG |= CONFIG_SYS_I2C_PINMUX_SET;
@@ -482,7 +482,7 @@ void cpu_init_f(void)
 	init_fbcs();
 #endif				/* #ifndef CONFIG_MONITOR_IS_IN_RAM */
 
-#ifdef CONFIG_FSL_I2C
+#ifdef CONFIG_SYS_I2C_FSL
 	CONFIG_SYS_I2C_PINMUX_REG &= CONFIG_SYS_I2C_PINMUX_CLR;
 	CONFIG_SYS_I2C_PINMUX_REG |= CONFIG_SYS_I2C_PINMUX_SET;
 #endif
diff --git a/arch/m68k/cpu/mcf52x2/speed.c b/arch/m68k/cpu/mcf52x2/speed.c
index d0f9762d0b..c5961d45ec 100644
--- a/arch/m68k/cpu/mcf52x2/speed.c
+++ b/arch/m68k/cpu/mcf52x2/speed.c
@@ -74,9 +74,9 @@ int get_clocks (void)
 	gd->bus_clk = gd->cpu_clk;
 #endif
 
-#ifdef CONFIG_FSL_I2C
+#ifdef CONFIG_SYS_I2C_FSL
 	gd->arch.i2c1_clk = gd->bus_clk;
-#ifdef CONFIG_SYS_I2C2_OFFSET
+#ifdef CONFIG_SYS_I2C2_FSL_OFFSET
 	gd->arch.i2c2_clk = gd->bus_clk;
 #endif
 #endif
diff --git a/arch/m68k/cpu/mcf532x/cpu_init.c b/arch/m68k/cpu/mcf532x/cpu_init.c
index f7101fd6d2..db7ded4782 100644
--- a/arch/m68k/cpu/mcf532x/cpu_init.c
+++ b/arch/m68k/cpu/mcf532x/cpu_init.c
@@ -82,7 +82,7 @@ void cpu_init_f(void)
 	out_be32(&fbcs->csmr5, CONFIG_SYS_CS5_MASK);
 #endif
 
-#ifdef CONFIG_FSL_I2C
+#ifdef CONFIG_SYS_I2C_FSL
 	out_8(&gpio->par_feci2c,
 		GPIO_PAR_FECI2C_SDA_SDA | GPIO_PAR_FECI2C_SCL_SCL);
 #endif
@@ -276,7 +276,7 @@ void cpu_init_f(void)
 	out_be32(&fbcs->csmr5, CONFIG_SYS_CS5_MASK);
 #endif
 
-#ifdef CONFIG_FSL_I2C
+#ifdef CONFIG_SYS_I2C_FSL
 	out_8(&gpio->par_feci2c,
 		GPIO_PAR_FECI2C_SCL_SCL | GPIO_PAR_FECI2C_SDA_SDA);
 #endif
diff --git a/arch/m68k/cpu/mcf532x/speed.c b/arch/m68k/cpu/mcf532x/speed.c
index b412abe7d1..a440bbb3b6 100644
--- a/arch/m68k/cpu/mcf532x/speed.c
+++ b/arch/m68k/cpu/mcf532x/speed.c
@@ -254,7 +254,7 @@ int get_clocks(void)
 	gd->bus_clk = clock_pll(CONFIG_SYS_CLK / 1000, 0) * 1000;
 	gd->cpu_clk = (gd->bus_clk * 3);
 
-#ifdef CONFIG_FSL_I2C
+#ifdef CONFIG_SYS_I2C_FSL
 	gd->arch.i2c1_clk = gd->bus_clk;
 #endif
 
diff --git a/arch/m68k/cpu/mcf5445x/cpu_init.c b/arch/m68k/cpu/mcf5445x/cpu_init.c
index 955968c0db..9c324dc968 100644
--- a/arch/m68k/cpu/mcf5445x/cpu_init.c
+++ b/arch/m68k/cpu/mcf5445x/cpu_init.c
@@ -196,7 +196,7 @@ void cpu_init_f(void)
 		GPIO_PAR_FBCTL_OE | GPIO_PAR_FBCTL_TA_TA |
 		GPIO_PAR_FBCTL_RW_RW | GPIO_PAR_FBCTL_TS_TS);
 
-#ifdef CONFIG_FSL_I2C
+#ifdef CONFIG_SYS_FSL_I2C
 	out_be16(&gpio->par_feci2c,
 		GPIO_PAR_FECI2C_SCL_SCL | GPIO_PAR_FECI2C_SDA_SDA);
 #endif
diff --git a/arch/m68k/cpu/mcf5445x/speed.c b/arch/m68k/cpu/mcf5445x/speed.c
index 594716b6ca..07a9b359b5 100644
--- a/arch/m68k/cpu/mcf5445x/speed.c
+++ b/arch/m68k/cpu/mcf5445x/speed.c
@@ -257,7 +257,7 @@ void setup_5445x_clocks(void)
 #endif
 	}
 
-#ifdef CONFIG_FSL_I2C
+#ifdef CONFIG_SYS_I2C_FSL
 	gd->arch.i2c1_clk = gd->bus_clk;
 #endif
 }
@@ -273,7 +273,7 @@ int get_clocks(void)
 	setup_5445x_clocks();
 #endif
 
-#ifdef CONFIG_FSL_I2C
+#ifdef CONFIG_SYS_FSL_I2C
 	gd->arch.i2c1_clk = gd->bus_clk;
 #endif
 
diff --git a/arch/m68k/cpu/mcf547x_8x/cpu_init.c b/arch/m68k/cpu/mcf547x_8x/cpu_init.c
index a9e3b4392f..c3df831f14 100644
--- a/arch/m68k/cpu/mcf547x_8x/cpu_init.c
+++ b/arch/m68k/cpu/mcf547x_8x/cpu_init.c
@@ -79,7 +79,7 @@ void cpu_init_f(void)
 	out_be32(&fbcs->csmr5, CONFIG_SYS_CS5_MASK);
 #endif
 
-#ifdef CONFIG_FSL_I2C
+#ifdef CONFIG_SYS_I2C_FSL
 	out_be16(&gpio->par_feci2cirq,
 		GPIO_PAR_FECI2CIRQ_SCL | GPIO_PAR_FECI2CIRQ_SDA);
 #endif
diff --git a/arch/m68k/cpu/mcf547x_8x/speed.c b/arch/m68k/cpu/mcf547x_8x/speed.c
index f516b10a13..2bc4c44247 100644
--- a/arch/m68k/cpu/mcf547x_8x/speed.c
+++ b/arch/m68k/cpu/mcf547x_8x/speed.c
@@ -24,7 +24,7 @@ int get_clocks(void)
 	gd->bus_clk = CONFIG_SYS_CLK;
 	gd->cpu_clk = (gd->bus_clk * 2);
 
-#ifdef CONFIG_FSL_I2C
+#ifdef CONFIG_SYS_I2C_FSL
 	gd->arch.i2c1_clk = gd->bus_clk;
 #endif
 
diff --git a/arch/m68k/include/asm/global_data.h b/arch/m68k/include/asm/global_data.h
index 0903644cdd..b55c91e613 100644
--- a/arch/m68k/include/asm/global_data.h
+++ b/arch/m68k/include/asm/global_data.h
@@ -10,7 +10,7 @@
 
 /* Architecture-specific global data */
 struct arch_global_data {
-#ifdef CONFIG_FSL_I2C
+#ifdef CONFIG_SYS_I2C_FSL
 	unsigned long	i2c1_clk;
 	unsigned long	i2c2_clk;
 #endif
diff --git a/arch/m68k/lib/board.c b/arch/m68k/lib/board.c
index 020dc2456e..e75b6a98dd 100644
--- a/arch/m68k/lib/board.c
+++ b/arch/m68k/lib/board.c
@@ -40,7 +40,7 @@
 #include <version.h>
 
 #if defined(CONFIG_HARD_I2C) || \
-    defined(CONFIG_SOFT_I2C)
+	defined(CONFIG_SYS_I2C)
 #include <i2c.h>
 #endif
 
@@ -126,11 +126,15 @@ static int init_func_ram (void)
 
 /***********************************************************************/
 
-#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
+#if defined(CONFIG_HARD_I2C) ||	defined(CONFIG_SYS_I2C)
 static int init_func_i2c (void)
 {
 	puts ("I2C:   ");
+#ifdef CONFIG_SYS_I2C
+	i2c_init_all();
+#else
 	i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+#endif
 	puts ("ready\n");
 	return (0);
 }
@@ -162,7 +166,7 @@ init_fnc_t *init_sequence[] = {
 	display_options,
 	checkcpu,
 	checkboard,
-#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
+#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SYS_I2C)
 	init_func_i2c,
 #endif
 #if defined(CONFIG_HARD_SPI)
@@ -485,6 +489,11 @@ void board_init_r (gd_t *id, ulong dest_addr)
 	spi_init_r ();
 #endif
 
+#if defined(CONFIG_SYS_I2C)
+	/* Adjust I2C subsystem pointers after relocation */
+	i2c_reloc_fixup();
+#endif
+
 	/* relocate environment function pointers etc. */
 	env_relocate ();
 
diff --git a/arch/nds32/lib/board.c b/arch/nds32/lib/board.c
index 7a25522b4a..2d4c6231a3 100644
--- a/arch/nds32/lib/board.c
+++ b/arch/nds32/lib/board.c
@@ -24,6 +24,10 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
+#if defined(CONFIG_SYS_I2C)
+#include <i2c.h>
+#endif
+
 ulong monitor_flash_len;
 
 /*
@@ -157,7 +161,7 @@ init_fnc_t *init_sequence[] = {
 #if defined(CONFIG_DISPLAY_BOARDINFO)
 	checkboard,		/* display board info */
 #endif
-#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
+#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SYS_I2C)
 	init_func_i2c,
 #endif
 	dram_init,		/* configure available RAM banks */
@@ -331,6 +335,10 @@ void board_init_r(gd_t *id, ulong dest_addr)
 	mmc_initialize(gd->bd);
 #endif
 
+#if defined(CONFIG_SYS_I2C_ADAPTERS)
+	i2c_reloc_fixup();
+#endif
+
 	/* initialize environment */
 	env_relocate();
 
diff --git a/arch/powerpc/cpu/mpc8260/i2c.c b/arch/powerpc/cpu/mpc8260/i2c.c
index fc8d2ef82c..8658ebdadd 100644
--- a/arch/powerpc/cpu/mpc8260/i2c.c
+++ b/arch/powerpc/cpu/mpc8260/i2c.c
@@ -730,23 +730,9 @@ unsigned int i2c_get_bus_num(void)
 
 int i2c_set_bus_num(unsigned int bus)
 {
-#if defined(CONFIG_I2C_MUX)
-	if (bus < CONFIG_SYS_MAX_I2C_BUS) {
-		i2c_bus_num = bus;
-	} else {
-		int ret;
-
-		ret = i2x_mux_select_mux(bus);
-		if (ret == 0)
-			i2c_bus_num = bus;
-		else
-			return ret;
-	}
-#else
 	if (bus >= CONFIG_SYS_MAX_I2C_BUS)
 		return -1;
 	i2c_bus_num = bus;
-#endif
 	return 0;
 }
 
diff --git a/arch/powerpc/cpu/mpc8xx/video.c b/arch/powerpc/cpu/mpc8xx/video.c
index 8d790b4e88..02cd0debc2 100644
--- a/arch/powerpc/cpu/mpc8xx/video.c
+++ b/arch/powerpc/cpu/mpc8xx/video.c
@@ -793,7 +793,11 @@ static void video_encoder_init (void)
 
 	/* Initialize the I2C */
 	debug ("[VIDEO ENCODER] Initializing I2C bus...\n");
+#ifdef CONFIG_SYS_I2C
+	i2c_init_all();
+#else
 	i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+#endif
 
 #ifdef CONFIG_FADS
 	/* Reset ADV7176 chip */
diff --git a/arch/powerpc/cpu/ppc4xx/40x_spd_sdram.c b/arch/powerpc/cpu/ppc4xx/40x_spd_sdram.c
index 55a58f6b18..4417646f83 100644
--- a/arch/powerpc/cpu/ppc4xx/40x_spd_sdram.c
+++ b/arch/powerpc/cpu/ppc4xx/40x_spd_sdram.c
@@ -36,10 +36,6 @@
 /*
  * Set default values
  */
-#ifndef CONFIG_SYS_I2C_SPEED
-#define CONFIG_SYS_I2C_SPEED	50000
-#endif
-
 #define ONE_BILLION	1000000000
 
 #define	 SDRAM0_CFG_DCE		0x80000000
@@ -142,7 +138,7 @@ long int spd_sdram(int(read_spd)(uint addr))
 		 * Make sure I2C controller is initialized
 		 * before continuing.
 		 */
-		i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+		i2c_set_bus_num(CONFIG_SYS_SPD_BUS_NUM);
 	}
 
 	/* Make shure we are using SDRAM */
diff --git a/arch/powerpc/cpu/ppc4xx/44x_spd_ddr.c b/arch/powerpc/cpu/ppc4xx/44x_spd_ddr.c
index 9d23e7653f..52340f209d 100644
--- a/arch/powerpc/cpu/ppc4xx/44x_spd_ddr.c
+++ b/arch/powerpc/cpu/ppc4xx/44x_spd_ddr.c
@@ -46,10 +46,6 @@
 /*
  * Set default values
  */
-#ifndef CONFIG_SYS_I2C_SPEED
-#define CONFIG_SYS_I2C_SPEED	50000
-#endif
-
 #define ONE_BILLION	1000000000
 
 /*
@@ -152,7 +148,7 @@ long int spd_sdram(void) {
 	 * Make sure I2C controller is initialized
 	 * before continuing.
 	 */
-	i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+	i2c_set_bus_num(CONFIG_SYS_SPD_BUS_NUM);
 
 	/*
 	 * Read the SPD information using I2C interface. Check to see if the
diff --git a/arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c b/arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c
index d30f442eb3..fe928db039 100644
--- a/arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c
+++ b/arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c
@@ -442,8 +442,7 @@ phys_size_t initdram(int board_type)
 	 */
 
 	/* switch to correct I2C bus */
-	I2C_SET_BUS(CONFIG_SYS_SPD_BUS_NUM);
-	i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+	i2c_set_bus_num(CONFIG_SYS_SPD_BUS_NUM);
 
 	/*------------------------------------------------------------------
 	 * Clear out the serial presence detect buffers.
diff --git a/arch/powerpc/cpu/ppc4xx/cmd_chip_config.c b/arch/powerpc/cpu/ppc4xx/cmd_chip_config.c
index b777d73295..4e9a40d585 100644
--- a/arch/powerpc/cpu/ppc4xx/cmd_chip_config.c
+++ b/arch/powerpc/cpu/ppc4xx/cmd_chip_config.c
@@ -39,7 +39,7 @@ static int do_chip_config(cmd_tbl_t *cmdtp, int flag, int argc, char * const arg
 	 * First switch to correct I2C bus. This is I2C bus 0
 	 * for all currently available 4xx derivats.
 	 */
-	I2C_SET_BUS(0);
+	i2c_set_bus_num(0);
 
 #ifdef CONFIG_CMD_EEPROM
 	ret = eeprom_read(CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR,
diff --git a/arch/powerpc/cpu/ppc4xx/denali_spd_ddr2.c b/arch/powerpc/cpu/ppc4xx/denali_spd_ddr2.c
index 55278b19bf..916451a2b0 100644
--- a/arch/powerpc/cpu/ppc4xx/denali_spd_ddr2.c
+++ b/arch/powerpc/cpu/ppc4xx/denali_spd_ddr2.c
@@ -1024,8 +1024,7 @@ phys_size_t initdram(int board_type)
 	 * before continuing.
 	 */
 	/* switch to correct I2C bus */
-	I2C_SET_BUS(CONFIG_SYS_SPD_BUS_NUM);
-	i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+	i2c_set_bus_num(CONFIG_SYS_SPD_BUS_NUM);
 
 	/*------------------------------------------------------------------
 	 * Clear out the serial presence detect buffers.
diff --git a/arch/powerpc/include/asm/ppc4xx-i2c.h b/arch/powerpc/include/asm/ppc4xx-i2c.h
index bbf7f35589..09189cf19b 100644
--- a/arch/powerpc/include/asm/ppc4xx-i2c.h
+++ b/arch/powerpc/include/asm/ppc4xx-i2c.h
@@ -18,24 +18,6 @@
 
 #define IIC_TIMEOUT	1		/* 1 second */
 
-#if defined(CONFIG_I2C_MULTI_BUS)
-#define I2C_BUS_OFFS	(i2c_bus_num * 0x100)
-#else
-#define I2C_BUS_OFFS	(0x000)
-#endif /* CONFIG_I2C_MULTI_BUS */
-
-#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
-    defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
-    defined(CONFIG_460EX) || defined(CONFIG_460GT)
-#define I2C_BASE_ADDR	(CONFIG_SYS_PERIPHERAL_BASE + 0x00000700 + I2C_BUS_OFFS)
-#elif defined(CONFIG_440) || defined(CONFIG_405EX)
-/* all remaining 440 variants */
-#define I2C_BASE_ADDR	(CONFIG_SYS_PERIPHERAL_BASE + 0x00000400 + I2C_BUS_OFFS)
-#else
-/* all 405 variants */
-#define I2C_BASE_ADDR	(0xEF600500 + I2C_BUS_OFFS)
-#endif
-
 struct ppc4xx_i2c {
 	u8 mdbuf;
 	u8 res1;
diff --git a/arch/powerpc/lib/board.c b/arch/powerpc/lib/board.c
index bef3f76f0c..a101e03601 100644
--- a/arch/powerpc/lib/board.c
+++ b/arch/powerpc/lib/board.c
@@ -82,8 +82,7 @@ extern void sc3_read_eeprom(void);
 #if defined(CONFIG_CMD_DOC)
 void doc_init(void);
 #endif
-#if defined(CONFIG_HARD_I2C) || \
-    defined(CONFIG_SOFT_I2C)
+#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SYS_I2C)
 #include <i2c.h>
 #endif
 #include <spi.h>
@@ -198,11 +197,15 @@ static int init_func_ram(void)
 
 /***********************************************************************/
 
-#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
+#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SYS_I2C)
 static int init_func_i2c(void)
 {
 	puts("I2C:   ");
+#ifdef CONFIG_SYS_I2C
+	i2c_init_all();
+#else
 	i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+#endif
 	puts("ready\n");
 	return 0;
 }
@@ -291,7 +294,7 @@ static init_fnc_t *init_sequence[] = {
 	misc_init_f,
 #endif
 	INIT_FUNC_WATCHDOG_RESET
-#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
+#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SYS_I2C)
 	init_func_i2c,
 #endif
 #if defined(CONFIG_HARD_SPI)
diff --git a/board/BuS/eb_cpux9k2/cpux9k2.c b/board/BuS/eb_cpux9k2/cpux9k2.c
index 9fd8e7acd1..5e4778e978 100644
--- a/board/BuS/eb_cpux9k2/cpux9k2.c
+++ b/board/BuS/eb_cpux9k2/cpux9k2.c
@@ -272,7 +272,7 @@ int drv_video_init(void)
 }
 #endif
 
-#ifdef CONFIG_SOFT_I2C
+#ifdef CONFIG_SYS_I2C_SOFT
 
 void i2c_init_board(void)
 {
diff --git a/board/BuS/vl_ma2sc/vl_ma2sc.c b/board/BuS/vl_ma2sc/vl_ma2sc.c
index 2dba146f10..e2ae6fde6c 100644
--- a/board/BuS/vl_ma2sc/vl_ma2sc.c
+++ b/board/BuS/vl_ma2sc/vl_ma2sc.c
@@ -307,7 +307,7 @@ int board_eth_init(bd_t *bis)
 	return rc;
 }
 
-#ifdef CONFIG_SOFT_I2C
+#ifdef CONFIG_SYS_I2C_SOFT
 void i2c_init_board(void)
 {
 	u32 pin;
diff --git a/board/atc/atc.c b/board/atc/atc.c
index ee395d92bd..0038561b10 100644
--- a/board/atc/atc.c
+++ b/board/atc/atc.c
@@ -154,7 +154,7 @@ const iop_conf_t iop_conf_tab[4][32] = {
 	/* PD18 */ {   0,   0,   0,   0,   0,   0   }, /* PD18 */
 	/* PD17 */ {   0,   0,   0,   0,   0,   0   }, /* PD17 */
 	/* PD16 */ {   0,   0,   0,   0,   0,   0   }, /* PD16 */
-#if defined(CONFIG_SOFT_I2C)
+#if defined(CONFIG_SYS_I2C_SOFT)
 	/* PD15 */ {   1,   0,   0,   1,   1,   1   }, /* I2C SDA */
 	/* PD14 */ {   1,   0,   0,   1,   1,   1   }, /* I2C SCL */
 #else
diff --git a/board/bluewater/snapper9260/snapper9260.c b/board/bluewater/snapper9260/snapper9260.c
index be03553384..8a6919dbb1 100644
--- a/board/bluewater/snapper9260/snapper9260.c
+++ b/board/bluewater/snapper9260/snapper9260.c
@@ -132,7 +132,7 @@ int board_init(void)
 
 	/* Initialise peripherals */
 	at91_seriald_hw_init();
-	i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+	i2c_set_bus_num(0);
 	nand_hw_init();
 	macb_hw_init();
 
diff --git a/board/cm5200/cm5200.c b/board/cm5200/cm5200.c
index 58f5a36f81..e391dfc9e1 100644
--- a/board/cm5200/cm5200.c
+++ b/board/cm5200/cm5200.c
@@ -309,7 +309,7 @@ int board_early_init_r(void)
 #ifdef CONFIG_MISC_INIT_R
 int misc_init_r(void)
 {
-#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
+#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SYS_I2C_SOFT)
 	uchar buf[6];
 	char str[18];
 	char hostname[MODULE_NAME_MAXLEN];
@@ -332,7 +332,7 @@ int misc_init_r(void)
 			" device at address %02X:%04X\n", CONFIG_SYS_I2C_EEPROM,
 			CONFIG_MAC_OFFSET);
 	}
-#endif /* defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C) */
+#endif /* defined(CONFIG_HARD_I2C) || defined(CONFIG_SYS_I2C_SOFT) */
 	if (!getenv("ethaddr"))
 		printf(LOG_PREFIX "MAC address not set, networking is not "
 					"operational\n");
diff --git a/board/cpu86/cpu86.c b/board/cpu86/cpu86.c
index a1f25ba71e..929291052f 100644
--- a/board/cpu86/cpu86.c
+++ b/board/cpu86/cpu86.c
@@ -145,7 +145,7 @@ const iop_conf_t iop_conf_tab[4][32] = {
 	/* PD18 */ {   0,   0,   0,   0,   0,   0   }, /* PD18 */
 	/* PD17 */ {   0,   0,   0,   0,   0,   0   }, /* PD17 */
 	/* PD16 */ {   0,   0,   0,   0,   0,   0   }, /* PD16 */
-#if defined(CONFIG_SOFT_I2C)
+#if defined(CONFIG_SYS_I2C_SOFT)
 	/* PD15 */ {   1,   0,   0,   1,   1,   1   }, /* I2C SDA */
 	/* PD14 */ {   1,   0,   0,   1,   1,   1   }, /* I2C SCL */
 #else
diff --git a/board/cpu87/cpu87.c b/board/cpu87/cpu87.c
index b6293073f6..01f90d2ebb 100644
--- a/board/cpu87/cpu87.c
+++ b/board/cpu87/cpu87.c
@@ -147,7 +147,7 @@ const iop_conf_t iop_conf_tab[4][32] = {
 	/* PD18 */ {   0,   0,   0,   0,   0,   0   }, /* PD18 */
 	/* PD17 */ {   0,   0,   0,   0,   0,   0   }, /* PD17 */
 	/* PD16 */ {   0,   0,   0,   0,   0,   0   }, /* PD16 */
-#if defined(CONFIG_SOFT_I2C)
+#if defined(CONFIG_SYS_I2C_SOFT)
 	/* PD15 */ {   1,   0,   0,   1,   1,   1   }, /* I2C SDA */
 	/* PD14 */ {   1,   0,   0,   1,   1,   1   }, /* I2C SCL */
 #else
diff --git a/board/csb272/csb272.c b/board/csb272/csb272.c
index bfc47e0b4e..43a1aa0521 100644
--- a/board/csb272/csb272.c
+++ b/board/csb272/csb272.c
@@ -35,7 +35,7 @@ uchar pll_fs6377_regs[16] = {
  */
 int pll_init(void)
 {
-	i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+	i2c_set_bus_num(0);
 
 	return  i2c_write(CONFIG_SYS_I2C_PLL_ADDR, 0, 1,
 		(uchar *) pll_fs6377_regs, sizeof(pll_fs6377_regs));
diff --git a/board/emk/top9000/top9000.c b/board/emk/top9000/top9000.c
index 083e5e8df6..6e2ffddb0a 100644
--- a/board/emk/top9000/top9000.c
+++ b/board/emk/top9000/top9000.c
@@ -229,7 +229,7 @@ int board_eth_init(bd_t *bis)
  * However i2c_get_bus_num() cannot be called before
  * relocation.
  */
-#ifdef CONFIG_SOFT_I2C
+#ifdef CONFIG_SYS_I2C_SOFT
 void iic_init(void)
 {
 	/* ports are now initialized in board_early_init_f() */
@@ -237,7 +237,7 @@ void iic_init(void)
 
 int iic_read(void)
 {
-	switch ((gd->flags & GD_FLG_RELOC) ? i2c_get_bus_num() : 0) {
+	switch (I2C_ADAP_HWNR) {
 	case 0:
 		return at91_get_pio_value(I2C0_PORT, SDA0_PIN);
 	case 1:
@@ -248,7 +248,7 @@ int iic_read(void)
 
 void iic_sda(int bit)
 {
-	switch ((gd->flags & GD_FLG_RELOC) ? i2c_get_bus_num() : 0) {
+	switch (I2C_ADAP_HWNR) {
 	case 0:
 		at91_set_pio_value(I2C0_PORT, SDA0_PIN, bit);
 		break;
@@ -260,7 +260,7 @@ void iic_sda(int bit)
 
 void iic_scl(int bit)
 {
-	switch ((gd->flags & GD_FLG_RELOC) ? i2c_get_bus_num() : 0) {
+	switch (I2C_ADAP_HWNR) {
 	case 0:
 		at91_set_pio_value(I2C0_PORT, SCL0_PIN, bit);
 		break;
diff --git a/board/esd/du440/du440.c b/board/esd/du440/du440.c
index dc35be4e2e..b168b247bd 100644
--- a/board/esd/du440/du440.c
+++ b/board/esd/du440/du440.c
@@ -372,7 +372,6 @@ int last_stage_init(void)
 	return 0;
 }
 
-#if defined(CONFIG_I2C_MULTI_BUS)
 /*
  * read field strength from I2C ADC
  */
@@ -487,7 +486,6 @@ U_BOOT_CMD(
 	"Initialize USB hub",
 	""
 );
-#endif /* CONFIG_I2C_MULTI_BUS */
 
 #define CONFIG_SYS_BOOT_EEPROM_PAGE_WRITE_BITS 3
 int boot_eeprom_write (unsigned dev_addr,
diff --git a/board/esd/vme8349/vme8349.c b/board/esd/vme8349/vme8349.c
index e9a25786cd..01365dcbd3 100644
--- a/board/esd/vme8349/vme8349.c
+++ b/board/esd/vme8349/vme8349.c
@@ -169,11 +169,11 @@ static spd_eeprom_t default_spd_eeprom = {
 
 int vme8349_read_spd(uchar chip, uint addr, int alen, uchar *buffer, int len)
 {
-	int old_bus = I2C_GET_BUS();
+	int old_bus = i2c_get_bus_num();
 	unsigned int l, sum;
 	int valid = 0;
 
-	I2C_SET_BUS(0);
+	i2c_set_bus_num(0);
 
 	if (i2c_read(chip, addr, alen, buffer, len) == 0)
 		if (memcmp(&buffer[64], &default_spd_eeprom.mid[0], 8) == 0) {
@@ -198,7 +198,7 @@ int vme8349_read_spd(uchar chip, uint addr, int alen, uchar *buffer, int len)
 		buffer[63] = sum;
 	}
 
-	I2C_SET_BUS(old_bus);
+	i2c_set_bus_num(old_bus);
 
 	return 0;
 }
diff --git a/board/eukrea/cpuat91/cpuat91.c b/board/eukrea/cpuat91/cpuat91.c
index f649dd0406..ec0ce0b205 100644
--- a/board/eukrea/cpuat91/cpuat91.c
+++ b/board/eukrea/cpuat91/cpuat91.c
@@ -57,7 +57,7 @@ int board_eth_init(bd_t *bis)
 }
 #endif
 
-#ifdef CONFIG_SOFT_I2C
+#ifdef CONFIG_SYS_I2C_SOFT
 void i2c_init_board(void)
 {
 	u32 pin;
diff --git a/board/freescale/m52277evb/README b/board/freescale/m52277evb/README
index b6e955bcad..3178d49d0a 100644
--- a/board/freescale/m52277evb/README
+++ b/board/freescale/m52277evb/README
@@ -82,9 +82,9 @@ CONFIG_CMD_DATE		-- enable to use date feature in u-boot
 CONFIG_MCFTMR		-- define to use DMA timer
 CONFIG_MCFPIT		-- define to use PIT timer
 
-CONFIG_FSL_I2C		-- define to use FSL common I2C driver
+CONFIG_SYS_I2C_FSL	-- define to use FSL common I2C driver
 CONFIG_HARD_I2C		-- define for I2C hardware support
-CONFIG_SOFT_I2C		-- define for I2C bit-banged
+CONFIG_SYS_I2C_SOFT	-- define for I2C bit-banged
 CONFIG_SYS_I2C_SPEED		-- define for I2C speed
 CONFIG_SYS_I2C_SLAVE		-- define for I2C slave address
 CONFIG_SYS_I2C_OFFSET		-- define for I2C base address offset
diff --git a/board/freescale/m53017evb/README b/board/freescale/m53017evb/README
index 64a3d42f0c..84fc1ecfb1 100644
--- a/board/freescale/m53017evb/README
+++ b/board/freescale/m53017evb/README
@@ -90,9 +90,9 @@ MCFFEC_TOUT_LOOP		-- set FEC timeout loop
 CONFIG_MCFTMR			-- define to use DMA timer
 CONFIG_MCFPIT			-- define to use PIT timer
 
-CONFIG_FSL_I2C			-- define to use FSL common I2C driver
+CONFIG_SYS_I2C_FSL		-- define to use FSL common I2C driver
 CONFIG_HARD_I2C			-- define for I2C hardware support
-CONFIG_SOFT_I2C			-- define for I2C bit-banged
+CONFIG_SYS_I2C_SOFT		-- define for I2C bit-banged
 CONFIG_SYS_I2C_SPEED		-- define for I2C speed
 CONFIG_SYS_I2C_SLAVE		-- define for I2C slave address
 CONFIG_SYS_I2C_OFFSET		-- define for I2C base address offset
diff --git a/board/freescale/m5373evb/README b/board/freescale/m5373evb/README
index 419d4d6d1e..52eac7b2ff 100644
--- a/board/freescale/m5373evb/README
+++ b/board/freescale/m5373evb/README
@@ -89,9 +89,9 @@ MCFFEC_TOUT_LOOP	-- set FEC timeout loop
 CONFIG_MCFTMR		-- define to use DMA timer
 CONFIG_MCFPIT		-- define to use PIT timer
 
-CONFIG_FSL_I2C		-- define to use FSL common I2C driver
+CONFIG_SYS_I2C_FSL	-- define to use FSL common I2C driver
 CONFIG_HARD_I2C		-- define for I2C hardware support
-CONFIG_SOFT_I2C		-- define for I2C bit-banged
+CONFIG_SYS_I2C_SOFT	-- define for I2C bit-banged
 CONFIG_SYS_I2C_SPEED		-- define for I2C speed
 CONFIG_SYS_I2C_SLAVE		-- define for I2C slave address
 CONFIG_SYS_I2C_OFFSET		-- define for I2C base address offset
diff --git a/board/freescale/m54455evb/README b/board/freescale/m54455evb/README
index 2bc6ce4bf3..c70c4c5c25 100644
--- a/board/freescale/m54455evb/README
+++ b/board/freescale/m54455evb/README
@@ -112,9 +112,9 @@ _IO_BASE		-- define for IO base address
 CONFIG_MCFTMR		-- define to use DMA timer
 CONFIG_MCFPIT		-- define to use PIT timer
 
-CONFIG_FSL_I2C		-- define to use FSL common I2C driver
+CONFIG_SYS_FSL_I2C	-- define to use FSL common I2C driver
 CONFIG_HARD_I2C		-- define for I2C hardware support
-CONFIG_SOFT_I2C		-- define for I2C bit-banged
+CONFIG_SYS_I2C_SOFT	-- define for I2C bit-banged
 CONFIG_SYS_I2C_SPEED		-- define for I2C speed
 CONFIG_SYS_I2C_SLAVE		-- define for I2C slave address
 CONFIG_SYS_I2C_OFFSET		-- define for I2C base address offset
diff --git a/board/freescale/m547xevb/README b/board/freescale/m547xevb/README
index d3aec20e4f..ce497c0d2a 100644
--- a/board/freescale/m547xevb/README
+++ b/board/freescale/m547xevb/README
@@ -97,9 +97,9 @@ CONFIG_DOS_PARTITION	-- enable DOS read/write
 
 CONFIG_SLTTMR		-- define to use SLT timer
 
-CONFIG_FSL_I2C		-- define to use FSL common I2C driver
+CONFIG_SYS_I2C_FSL	-- define to use FSL common I2C driver
 CONFIG_HARD_I2C		-- define for I2C hardware support
-CONFIG_SOFT_I2C		-- define for I2C bit-banged
+CONFIG_SYS_I2C_SOFT	-- define for I2C bit-banged
 CONFIG_SYS_I2C_SPEED		-- define for I2C speed
 CONFIG_SYS_I2C_SLAVE		-- define for I2C slave address
 CONFIG_SYS_I2C_OFFSET		-- define for I2C base address offset
diff --git a/board/freescale/mpc8349itx/mpc8349itx.c b/board/freescale/mpc8349itx/mpc8349itx.c
index 510ef0453c..803d722806 100644
--- a/board/freescale/mpc8349itx/mpc8349itx.c
+++ b/board/freescale/mpc8349itx/mpc8349itx.c
@@ -247,8 +247,7 @@ int misc_init_r(void)
 {
 	int rc = 0;
 
-#ifdef CONFIG_HARD_I2C
-
+#if defined(CONFIG_SYS_I2C)
 	unsigned int orig_bus = i2c_get_bus_num();
 	u8 i2c_data;
 
diff --git a/board/freescale/mpc8349itx/pci.c b/board/freescale/mpc8349itx/pci.c
index 64259776c7..afc9df0923 100644
--- a/board/freescale/mpc8349itx/pci.c
+++ b/board/freescale/mpc8349itx/pci.c
@@ -71,7 +71,7 @@ void pci_init_board(void)
 #endif
 	u8 reg8;
 
-#ifdef CONFIG_HARD_I2C
+#if defined(CONFIG_SYS_I2C)
 	i2c_set_bus_num(1);
 	/* Read the PCI_M66EN jumper setting */
 	if ((i2c_read(CONFIG_SYS_I2C_8574_ADDR2, 0, 0, &reg8, sizeof(reg8)) == 0) ||
diff --git a/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c b/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c
index d8b1e41e39..50553dacd9 100644
--- a/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c
+++ b/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c
@@ -232,7 +232,7 @@ int checkboard(void)
 		in_8(&cpld_data->pcba_rev) & 0x0F);
 
 	/* Initialize i2c early for rom_loc and flash bank information */
-	i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+	i2c_set_bus_num(CONFIG_SYS_SPD_BUS_NUM);
 
 	if (i2c_read(CONFIG_SYS_I2C_PCA9557_ADDR, 0, 1, &in, 1) < 0 ||
 	    i2c_read(CONFIG_SYS_I2C_PCA9557_ADDR, 1, 1, &out, 1) < 0 ||
diff --git a/board/freescale/vf610twr/vf610twr.c b/board/freescale/vf610twr/vf610twr.c
index 7c6cb5be56..699ea7f010 100644
--- a/board/freescale/vf610twr/vf610twr.c
+++ b/board/freescale/vf610twr/vf610twr.c
@@ -14,6 +14,7 @@
 #include <fsl_esdhc.h>
 #include <miiphy.h>
 #include <netdev.h>
+#include <i2c.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -267,6 +268,16 @@ static void setup_iomux_enet(void)
 	imx_iomux_v3_setup_multiple_pads(enet0_pads, ARRAY_SIZE(enet0_pads));
 }
 
+static void setup_iomux_i2c(void)
+{
+	static const iomux_v3_cfg_t i2c0_pads[] = {
+		VF610_PAD_PTB14__I2C0_SCL,
+		VF610_PAD_PTB15__I2C0_SDA,
+	};
+
+	imx_iomux_v3_setup_multiple_pads(i2c0_pads, ARRAY_SIZE(i2c0_pads));
+}
+
 #ifdef CONFIG_FSL_ESDHC
 struct fsl_esdhc_cfg esdhc_cfg[1] = {
 	{ESDHC1_BASE_ADDR},
@@ -315,7 +326,7 @@ static void clock_init(void)
 		CCM_CCGR3_ANADIG_CTRL_MASK);
 	clrsetbits_le32(&ccm->ccgr4, CCM_REG_CTRL_MASK,
 		CCM_CCGR4_WKUP_CTRL_MASK | CCM_CCGR4_CCM_CTRL_MASK |
-		CCM_CCGR4_GPC_CTRL_MASK);
+		CCM_CCGR4_GPC_CTRL_MASK | CCM_CCGR4_I2C0_CTRL_MASK);
 	clrsetbits_le32(&ccm->ccgr6, CCM_REG_CTRL_MASK,
 		CCM_CCGR6_OCOTP_CTRL_MASK | CCM_CCGR6_DDRMC_CTRL_MASK);
 	clrsetbits_le32(&ccm->ccgr7, CCM_REG_CTRL_MASK,
@@ -374,6 +385,7 @@ int board_early_init_f(void)
 
 	setup_iomux_uart();
 	setup_iomux_enet();
+	setup_iomux_i2c();
 
 	return 0;
 }
diff --git a/board/ids8247/ids8247.c b/board/ids8247/ids8247.c
index a51af03d5d..de6b8fbd9b 100644
--- a/board/ids8247/ids8247.c
+++ b/board/ids8247/ids8247.c
@@ -35,7 +35,7 @@ const iop_conf_t iop_conf_tab[4][32] = {
 	/* PA27 */ {   1,   1,	 1,   0,   0,	0   }, /* FCC1 RXDV */
 	/* PA26 */ {   1,   1,	 1,   0,   0,	0   }, /* FCC1 RXER */
 	/* PA25 */ {   0,   0,	 0,   0,   1,	0   }, /* 8247_P0 */
-#if defined(CONFIG_SOFT_I2C)
+#if defined(CONFIG_SYS_I2C_SOFT)
 	/* PA24 */ {   1,   0,	 0,   0,   1,	1   }, /* I2C_SDA2 */
 	/* PA23 */ {   1,   0,	 0,   1,   1,	1   }, /* I2C_SCL2 */
 #else /* normal I/O port pins */
diff --git a/board/keymile/common/ivm.c b/board/keymile/common/ivm.c
index 47c4450e3d..aabd3a85b7 100644
--- a/board/keymile/common/ivm.c
+++ b/board/keymile/common/ivm.c
@@ -298,29 +298,14 @@ int ivm_analyze_eeprom(unsigned char *buf, int len)
 
 int ivm_read_eeprom(void)
 {
-#if defined(CONFIG_I2C_MUX)
-	I2C_MUX_DEVICE *dev = NULL;
-#endif
 	uchar i2c_buffer[CONFIG_SYS_IVM_EEPROM_MAX_LEN];
-	uchar	*buf;
-	unsigned long dev_addr = CONFIG_SYS_IVM_EEPROM_ADR;
 	int ret;
 
-#if defined(CONFIG_I2C_MUX)
-	/* First init the Bus, select the Bus */
-	buf = (unsigned char *) getenv("EEprom_ivm");
-	if (buf != NULL)
-		dev = i2c_mux_ident_muxstring(buf);
-	if (dev == NULL) {
-		printf("Error couldnt add Bus for IVM\n");
-		return -1;
-	}
-	i2c_set_bus_num(dev->busid);
-#endif
+	i2c_set_bus_num(CONFIG_KM_IVM_BUS);
 	/* add deblocking here */
 	i2c_make_abort();
 
-	ret = i2c_read(dev_addr, 0, 1, i2c_buffer,
+	ret = i2c_read(CONFIG_SYS_IVM_EEPROM_ADR, 0, 1, i2c_buffer,
 		CONFIG_SYS_IVM_EEPROM_MAX_LEN);
 	if (ret != 0) {
 		printf("Error reading EEprom\n");
diff --git a/board/keymile/km83xx/km83xx.c b/board/keymile/km83xx/km83xx.c
index b5ea7ae95b..cd861c9f12 100644
--- a/board/keymile/km83xx/km83xx.c
+++ b/board/keymile/km83xx/km83xx.c
@@ -92,19 +92,6 @@ const qe_iop_conf_t qe_iop_conf_tab[] = {
 	{0,  0, 0, 0, QE_IOP_TAB_END},
 };
 
-static int board_init_i2c_busses(void)
-{
-	I2C_MUX_DEVICE *dev = NULL;
-	uchar *dtt_bus = (uchar *)"pca9547:70:a";
-
-	/* Set up the Bus for the DTTs */
-	dev = i2c_mux_ident_muxstring(dtt_bus);
-	if (dev == NULL)
-		printf("Error couldn't add Bus for DTT\n");
-
-	return 0;
-}
-
 #if defined(CONFIG_SUVD3)
 const uint upma_table[] = {
 	0x1ffedc00, 0x0ffcdc80, 0x0ffcdc80, 0x0ffcdc04, /* Words 0 to 3 */
@@ -203,8 +190,6 @@ int board_early_init_r(void)
 
 int misc_init_r(void)
 {
-	/* add board specific i2c busses */
-	board_init_i2c_busses();
 	return 0;
 }
 
diff --git a/board/keymile/km_arm/km_arm.c b/board/keymile/km_arm/km_arm.c
index e76acc0dac..481876b2ed 100644
--- a/board/keymile/km_arm/km_arm.c
+++ b/board/keymile/km_arm/km_arm.c
@@ -47,7 +47,7 @@ static const u32 kwmpp_config[] = {
 	MPP5_NF_IO7,
 	MPP6_SYSRST_OUTn,
 	MPP7_PEX_RST_OUTn,
-#if defined(CONFIG_SOFT_I2C)
+#if defined(CONFIG_SYS_I2C_SOFT)
 	MPP8_GPIO,		/* SDA */
 	MPP9_GPIO,		/* SCL */
 #endif
@@ -218,7 +218,7 @@ int misc_init_r(void)
 
 int board_early_init_f(void)
 {
-#if defined(CONFIG_SOFT_I2C)
+#if defined(CONFIG_SYS_I2C_SOFT)
 	u32 tmp;
 
 	/* set the 2 bitbang i2c pins as output gpios */
@@ -244,7 +244,7 @@ int board_init(void)
 	kw_gpio_set_valid(KM_FLASH_GPIO_PIN, 1);
 	kw_gpio_direction_output(KM_FLASH_GPIO_PIN, 1);
 
-#if defined(CONFIG_SOFT_I2C)
+#if defined(CONFIG_SYS_I2C_SOFT)
 	/*
 	 * Reinit the GPIO for I2C Bitbang driver so that the now
 	 * available gpio framework is consistent. The calls to
@@ -424,7 +424,7 @@ int hush_init_var(void)
 }
 #endif
 
-#if defined(CONFIG_SOFT_I2C)
+#if defined(CONFIG_SYS_I2C_SOFT)
 void set_sda(int state)
 {
 	I2C_ACTIVE;
diff --git a/board/lwmon/lwmon.c b/board/lwmon/lwmon.c
index fb7e54d523..225b1ef258 100644
--- a/board/lwmon/lwmon.c
+++ b/board/lwmon/lwmon.c
@@ -464,7 +464,7 @@ static void kbd_init (void)
 	uchar val, errcd;
 	int i;
 
-	i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+	i2c_set_bus_num(0);
 
 	gd->arch.kbd_status = 0;
 
diff --git a/board/lwmon/pcmcia.c b/board/lwmon/pcmcia.c
index acbb9d54d2..b9894cf011 100644
--- a/board/lwmon/pcmcia.c
+++ b/board/lwmon/pcmcia.c
@@ -104,7 +104,7 @@ int pcmcia_hardware_enable(int slot)
 
 	/*  switch VCC on */
 	val |= MAX1604_OP_SUS | MAX1604_VCCBON;
-	i2c_init  (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+	i2c_set_bus_num(0);
 	i2c_write (CONFIG_SYS_I2C_POWER_A_ADDR, 0, 0, &val, 1);
 
 	udelay(500000);
@@ -193,7 +193,7 @@ int pcmcia_voltage_set(int slot, int vcc, int vpp)
 	 */
 	debug ("PCMCIA power OFF\n");
 	val  = MAX1604_VCCBHIZ | MAX1604_VPPBHIZ;
-	i2c_init  (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+	i2c_set_bus_num(0);
 	i2c_write (CONFIG_SYS_I2C_POWER_A_ADDR, 0, 0, &val, 1);
 
 	val = 0;
diff --git a/board/lwmon5/kbd.c b/board/lwmon5/kbd.c
index f3562b749b..97962daf93 100644
--- a/board/lwmon5/kbd.c
+++ b/board/lwmon5/kbd.c
@@ -98,7 +98,7 @@ static void kbd_init (void)
 	uchar val, errcd;
 	int i;
 
-	i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+	i2c_set_bus_num(0);
 
 	gd->arch.kbd_status = 0;
 
diff --git a/board/mpl/pip405/pip405.c b/board/mpl/pip405/pip405.c
index f39bb3572c..7c7690ff55 100644
--- a/board/mpl/pip405/pip405.c
+++ b/board/mpl/pip405/pip405.c
@@ -192,7 +192,7 @@ int board_early_init_f (void)
 #endif
 
 	/* Read Serial Presence Detect Information */
-	i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+	i2c_set_bus_num(0);
 	for (i = 0; i < 128; i++)
 		datain[i] = 127;
 	i2c_read(SPD_EEPROM_ADDRESS,0,1,datain,128);
diff --git a/board/nvidia/common/board.c b/board/nvidia/common/board.c
index 5f72c02572..126e56e97a 100644
--- a/board/nvidia/common/board.c
+++ b/board/nvidia/common/board.c
@@ -135,7 +135,7 @@ int board_init(void)
 
 	power_det_init();
 
-#ifdef CONFIG_TEGRA_I2C
+#ifdef CONFIG_SYS_I2C_TEGRA
 #ifndef CONFIG_SYS_I2C_INIT_BOARD
 #error "You must define CONFIG_SYS_I2C_INIT_BOARD to use i2c on Nvidia boards"
 #endif
@@ -149,7 +149,7 @@ int board_init(void)
 		debug("Memory controller init failed: %d\n", err);
 #  endif
 # endif /* CONFIG_TEGRA_PMU */
-#endif /* CONFIG_TEGRA_I2C */
+#endif /* CONFIG_SYS_I2C_TEGRA */
 
 #ifdef CONFIG_USB_EHCI_TEGRA
 	pin_mux_usb();
diff --git a/board/pm826/pm826.c b/board/pm826/pm826.c
index 109b20dec0..93bb1b4615 100644
--- a/board/pm826/pm826.c
+++ b/board/pm826/pm826.c
@@ -153,7 +153,7 @@ const iop_conf_t iop_conf_tab[4][32] = {
 	/* PD18 */ {   0,   0,   0,   1,   0,   0   }, /* PD18 */
 	/* PD17 */ {   0,   1,   0,   0,   0,   0   }, /* PD17 */
 	/* PD16 */ {   0,   1,   0,   1,   0,   0   }, /* PD16 */
-#if defined(CONFIG_SOFT_I2C)
+#if defined(CONFIG_SYS_I2C_SOFT)
 	/* PD15 */ {   1,   0,   0,   1,   1,   1   }, /* I2C SDA */
 	/* PD14 */ {   1,   0,   0,   1,   1,   1   }, /* I2C SCL */
 #else
diff --git a/board/pm828/pm828.c b/board/pm828/pm828.c
index 26c3683ded..f446543fed 100644
--- a/board/pm828/pm828.c
+++ b/board/pm828/pm828.c
@@ -153,7 +153,7 @@ const iop_conf_t iop_conf_tab[4][32] = {
 	/* PD18 */ {   0,   0,   0,   1,   0,   0   }, /* PD18 */
 	/* PD17 */ {   0,   1,   0,   0,   0,   0   }, /* PD17 */
 	/* PD16 */ {   0,   1,   0,   1,   0,   0   }, /* PD16 */
-#if defined(CONFIG_SOFT_I2C)
+#if defined(CONFIG_SYS_I2C_SOFT)
 	/* PD15 */ {   1,   0,   0,   1,   1,   1   }, /* I2C SDA */
 	/* PD14 */ {   1,   0,   0,   1,   1,   1   }, /* I2C SCL */
 #else
diff --git a/board/sacsng/ioconfig.h b/board/sacsng/ioconfig.h
index be1ce7c835..ac8f152e1f 100644
--- a/board/sacsng/ioconfig.h
+++ b/board/sacsng/ioconfig.h
@@ -187,7 +187,7 @@ const iop_conf_t iop_conf_tab[4][32] = {
 	/* PD17 */ { CONF, SPEC,   1,  DOUT, ACTV,   0   }, /* SPI_MOSI       */
 	/* PD16 */ { CONF, SPEC,   1,  DIN,  ACTV,   0   }, /* SPI_MISO       */
 #endif
-#if defined(CONFIG_SOFT_I2C)
+#if defined(CONFIG_SYS_I2C_SOFT)
 	/* PD15 */ { CONF, GPIO,   0,  DOUT, OPEN,   1   }, /* I2C_SDA        */
 	/* PD14 */ { CONF, GPIO,   0,  DOUT, ACTV,   1   }, /* I2C_SCL        */
 #else
diff --git a/board/sandburst/common/ppc440gx_i2c.c b/board/sandburst/common/ppc440gx_i2c.c
deleted file mode 100644
index 1d7f17c39a..0000000000
--- a/board/sandburst/common/ppc440gx_i2c.c
+++ /dev/null
@@ -1,494 +0,0 @@
-/*
- *  Copyright (C) 2005 Sandburst Corporation
- *
- * SPDX-License-Identifier:	GPL-2.0+ 
- */
-
-/*
- * Ported from arch/powerpc/cpu/ppc4xx/i2c.c by AS HARNOIS by
- * Travis B. Sawyer
- * Sandburst Corporation.
- */
-#include <common.h>
-#include <asm/ppc4xx.h>
-#include <asm/ppc4xx-i2c.h>
-#include <i2c.h>
-#include <command.h>
-#include "ppc440gx_i2c.h"
-#include <asm/io.h>
-
-#ifdef CONFIG_I2C_BUS1
-
-#define IIC_OK		0
-#define IIC_NOK		1
-#define IIC_NOK_LA	2		/* Lost arbitration */
-#define IIC_NOK_ICT	3		/* Incomplete transfer */
-#define IIC_NOK_XFRA	4		/* Transfer aborted */
-#define IIC_NOK_DATA	5		/* No data in buffer */
-#define IIC_NOK_TOUT	6		/* Transfer timeout */
-
-#define IIC_TIMEOUT 1			/* 1 second */
-#if defined(CONFIG_SYS_I2C_NOPROBES)
-static uchar i2c_no_probes[] = CONFIG_SYS_I2C_NOPROBES;
-#endif
-
-static struct ppc4xx_i2c *i2c = (struct ppc4xx_i2c *)I2C_REGISTERS_BUS1_BASE_ADDRESS;
-
-static void _i2c_bus1_reset (void)
-{
-	int i, status;
-
-	/* Reset status register */
-	/* write 1 in SCMP and IRQA to clear these fields */
-	out_8 (IIC_STS1, 0x0A);
-
-	/* write 1 in IRQP IRQD LA ICT XFRA to clear these fields */
-	out_8 (IIC_EXTSTS1, 0x8F);
-	__asm__ volatile ("eieio");
-
-	/*
-	 * Get current state, reset bus
-	 * only if no transfers are pending.
-	 */
-	i = 10;
-	do {
-		/* Get status */
-		status = in_8 (IIC_STS1);
-		udelay (500);			/* 500us */
-		i--;
-	} while ((status & IIC_STS_PT) && (i > 0));
-	/* Soft reset controller */
-	status = in_8 (IIC_XTCNTLSS1);
-	out_8 (IIC_XTCNTLSS1, (status | IIC_XTCNTLSS_SRST));
-	__asm__ volatile ("eieio");
-
-	/* make sure where in initial state, data hi, clock hi */
-	out_8 (IIC_DIRECTCNTL1, 0xC);
-	for (i = 0; i < 10; i++) {
-		if ((in_8 (IIC_DIRECTCNTL1) & 0x3) != 0x3) {
-			/* clock until we get to known state */
-			out_8 (IIC_DIRECTCNTL1, 0x8);	/* clock lo */
-			udelay (100);		/* 100us */
-			out_8 (IIC_DIRECTCNTL1, 0xC);	/* clock hi */
-			udelay (100);		/* 100us */
-		} else {
-			break;
-		}
-	}
-	/* send start condition */
-	out_8 (IIC_DIRECTCNTL1, 0x4);
-	udelay (1000);				/* 1ms */
-	/* send stop condition */
-	out_8 (IIC_DIRECTCNTL1, 0xC);
-	udelay (1000);				/* 1ms */
-	/* Unreset controller */
-	out_8 (IIC_XTCNTLSS1, (status & ~IIC_XTCNTLSS_SRST));
-	udelay (1000);				/* 1ms */
-}
-
-void i2c1_init (int speed, int slaveadd)
-{
-	sys_info_t sysInfo;
-	unsigned long freqOPB;
-	int val, divisor;
-
-#ifdef CONFIG_SYS_I2C_INIT_BOARD
-	/* call board specific i2c bus reset routine before accessing the   */
-	/* environment, which might be in a chip on that bus. For details   */
-	/* about this problem see doc/I2C_Edge_Conditions.                  */
-	i2c_init_board();
-#endif
-
-	/* Handle possible failed I2C state */
-	/* FIXME: put this into i2c_init_board()? */
-	_i2c_bus1_reset ();
-
-	/* clear lo master address */
-	out_8 (IIC_LMADR1, 0);
-
-	/* clear hi master address */
-	out_8 (IIC_HMADR1, 0);
-
-	/* clear lo slave address */
-	out_8 (IIC_LSADR1, 0);
-
-	/* clear hi slave address */
-	out_8 (IIC_HSADR1, 0);
-
-	/* Clock divide Register */
-	/* get OPB frequency */
-	get_sys_info (&sysInfo);
-	freqOPB = sysInfo.freqPLB / sysInfo.pllOpbDiv;
-	/* set divisor according to freqOPB */
-	divisor = (freqOPB - 1) / 10000000;
-	if (divisor == 0)
-		divisor = 1;
-	out_8 (IIC_CLKDIV1, divisor);
-
-	/* no interrupts */
-	out_8 (IIC_INTRMSK1, 0);
-
-	/* clear transfer count */
-	out_8 (IIC_XFRCNT1, 0);
-
-	/* clear extended control & stat */
-	/* write 1 in SRC SRS SWC SWS to clear these fields */
-	out_8 (IIC_XTCNTLSS1, 0xF0);
-
-	/* Mode Control Register
-	   Flush Slave/Master data buffer */
-	out_8 (IIC_MDCNTL1, IIC_MDCNTL_FSDB | IIC_MDCNTL_FMDB);
-	__asm__ volatile ("eieio");
-
-
-	val = in_8(IIC_MDCNTL1);
-	__asm__ volatile ("eieio");
-
-	/* Ignore General Call, slave transfers are ignored,
-	   disable interrupts, exit unknown bus state, enable hold
-	   SCL
-	   100kHz normaly or FastMode for 400kHz and above
-	*/
-
-	val |= IIC_MDCNTL_EUBS|IIC_MDCNTL_HSCL;
-	if( speed >= 400000 ){
-		val |= IIC_MDCNTL_FSM;
-	}
-	out_8 (IIC_MDCNTL1, val);
-
-	/* clear control reg */
-	out_8 (IIC_CNTL1, 0x00);
-	__asm__ volatile ("eieio");
-
-}
-
-/*
-  This code tries to use the features of the 405GP i2c
-  controller. It will transfer up to 4 bytes in one pass
-  on the loop. It only does out_8(lbz) to the buffer when it
-  is possible to do out16(lhz) transfers.
-
-  cmd_type is 0 for write 1 for read.
-
-  addr_len can take any value from 0-255, it is only limited
-  by the char, we could make it larger if needed. If it is
-  0 we skip the address write cycle.
-
-  Typical case is a Write of an addr followd by a Read. The
-  IBM FAQ does not cover this. On the last byte of the write
-  we don't set the creg CHT bit, and on the first bytes of the
-  read we set the RPST bit.
-
-  It does not support address only transfers, there must be
-  a data part. If you want to write the address yourself, put
-  it in the data pointer.
-
-  It does not support transfer to/from address 0.
-
-  It does not check XFRCNT.
-*/
-static
-int i2c_transfer1(unsigned char cmd_type,
-		  unsigned char chip,
-		  unsigned char addr[],
-		  unsigned char addr_len,
-		  unsigned char data[],
-		  unsigned short data_len )
-{
-	unsigned char* ptr;
-	int reading;
-	int tran,cnt;
-	int result;
-	int status;
-	int i;
-	uchar creg;
-
-	if( data == 0 || data_len == 0 ){
-		/*Don't support data transfer of no length or to address 0*/
-		printf( "i2c_transfer: bad call\n" );
-		return IIC_NOK;
-	}
-	if( addr && addr_len ){
-		ptr = addr;
-		cnt = addr_len;
-		reading = 0;
-	}else{
-		ptr = data;
-		cnt = data_len;
-		reading = cmd_type;
-	}
-
-	/*Clear Stop Complete Bit*/
-	out_8(IIC_STS1,IIC_STS_SCMP);
-	/* Check init */
-	i=10;
-	do {
-		/* Get status */
-		status = in_8(IIC_STS1);
-		__asm__ volatile("eieio");
-		i--;
-	} while ((status & IIC_STS_PT) && (i>0));
-
-	if (status & IIC_STS_PT) {
-		result = IIC_NOK_TOUT;
-		return(result);
-	}
-	/*flush the Master/Slave Databuffers*/
-	out_8(IIC_MDCNTL1, ((in_8(IIC_MDCNTL1))|IIC_MDCNTL_FMDB|IIC_MDCNTL_FSDB));
-	/*need to wait 4 OPB clocks? code below should take that long*/
-
-	/* 7-bit adressing */
-	out_8(IIC_HMADR1,0);
-	out_8(IIC_LMADR1, chip);
-	__asm__ volatile("eieio");
-
-	tran = 0;
-	result = IIC_OK;
-	creg = 0;
-
-	while ( tran != cnt && (result == IIC_OK)) {
-		int  bc,j;
-
-		/* Control register =
-		   Normal transfer, 7-bits adressing, Transfer up to bc bytes, Normal start,
-		   Transfer is a sequence of transfers
-		*/
-		creg |= IIC_CNTL_PT;
-
-		bc = (cnt - tran) > 4 ? 4 :
-			cnt - tran;
-		creg |= (bc-1)<<4;
-		/* if the real cmd type is write continue trans*/
-		if ( (!cmd_type && (ptr == addr)) || ((tran+bc) != cnt) )
-			creg |= IIC_CNTL_CHT;
-
-		if (reading)
-			creg |= IIC_CNTL_READ;
-		else {
-			for(j=0; j<bc; j++) {
-				/* Set buffer */
-				out_8(IIC_MDBUF1,ptr[tran+j]);
-				__asm__ volatile("eieio");
-			}
-		}
-		out_8(IIC_CNTL1, creg );
-		__asm__ volatile("eieio");
-
-		/* Transfer is in progress
-		   we have to wait for upto 5 bytes of data
-		   1 byte chip address+r/w bit then bc bytes
-		   of data.
-		   udelay(10) is 1 bit time at 100khz
-		   Doubled for slop. 20 is too small.
-		*/
-		i=2*5*8;
-		do {
-			/* Get status */
-			status = in_8(IIC_STS1);
-			__asm__ volatile("eieio");
-			udelay (10);
-			i--;
-		} while ((status & IIC_STS_PT) && !(status & IIC_STS_ERR)
-			 && (i>0));
-
-		if (status & IIC_STS_ERR) {
-			result = IIC_NOK;
-			status = in_8 (IIC_EXTSTS1);
-			/* Lost arbitration? */
-			if (status & IIC_EXTSTS_LA)
-				result = IIC_NOK_LA;
-			/* Incomplete transfer? */
-			if (status & IIC_EXTSTS_ICT)
-				result = IIC_NOK_ICT;
-			/* Transfer aborted? */
-			if (status & IIC_EXTSTS_XFRA)
-				result = IIC_NOK_XFRA;
-		} else if ( status & IIC_STS_PT) {
-			result = IIC_NOK_TOUT;
-		}
-		/* Command is reading => get buffer */
-		if ((reading) && (result == IIC_OK)) {
-			/* Are there data in buffer */
-			if (status & IIC_STS_MDBS) {
-				/*
-				  even if we have data we have to wait 4OPB clocks
-				  for it to hit the front of the FIFO, after that
-				  we can just read. We should check XFCNT here and
-				  if the FIFO is full there is no need to wait.
-				*/
-				udelay (1);
-				for(j=0;j<bc;j++) {
-					ptr[tran+j] = in_8(IIC_MDBUF1);
-					__asm__ volatile("eieio");
-				}
-			} else
-				result = IIC_NOK_DATA;
-		}
-		creg = 0;
-		tran+=bc;
-		if( ptr == addr && tran == cnt ) {
-			ptr = data;
-			cnt = data_len;
-			tran = 0;
-			reading = cmd_type;
-			if( reading )
-				creg = IIC_CNTL_RPST;
-		}
-	}
-	return (result);
-}
-
-int i2c_probe1 (uchar chip)
-{
-	uchar buf[1];
-
-	buf[0] = 0;
-
-	/*
-	 * What is needed is to send the chip address and verify that the
-	 * address was <ACK>ed (i.e. there was a chip at that address which
-	 * drove the data line low).
-	 */
-	return(i2c_transfer1 (1, chip << 1, 0,0, buf, 1) != 0);
-}
-
-
-int i2c_read1 (uchar chip, uint addr, int alen, uchar * buffer, int len)
-{
-	uchar xaddr[4];
-	int ret;
-
-	if ( alen > 4 ) {
-		printf ("I2C read: addr len %d not supported\n", alen);
-		return 1;
-	}
-
-	if ( alen > 0 ) {
-		xaddr[0] = (addr >> 24) & 0xFF;
-		xaddr[1] = (addr >> 16) & 0xFF;
-		xaddr[2] = (addr >> 8) & 0xFF;
-		xaddr[3] = addr & 0xFF;
-	}
-
-
-#ifdef CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
-	/*
-	 * EEPROM chips that implement "address overflow" are ones
-	 * like Catalyst 24WC04/08/16 which has 9/10/11 bits of
-	 * address and the extra bits end up in the "chip address"
-	 * bit slots. This makes a 24WC08 (1Kbyte) chip look like
-	 * four 256 byte chips.
-	 *
-	 * Note that we consider the length of the address field to
-	 * still be one byte because the extra address bits are
-	 * hidden in the chip address.
-	 */
-	if( alen > 0 )
-		chip |= ((addr >> (alen * 8)) & CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW);
-#endif
-	if( (ret = i2c_transfer1( 1, chip<<1, &xaddr[4-alen], alen, buffer, len )) != 0) {
-		printf( "I2c read: failed %d\n", ret);
-		return 1;
-	}
-	return 0;
-}
-
-int i2c_write1 (uchar chip, uint addr, int alen, uchar * buffer, int len)
-{
-	uchar xaddr[4];
-
-	if ( alen > 4 ) {
-		printf ("I2C write: addr len %d not supported\n", alen);
-		return 1;
-
-	}
-	if ( alen > 0 ) {
-		xaddr[0] = (addr >> 24) & 0xFF;
-		xaddr[1] = (addr >> 16) & 0xFF;
-		xaddr[2] = (addr >> 8) & 0xFF;
-		xaddr[3] = addr & 0xFF;
-	}
-
-#ifdef CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
-	/*
-	 * EEPROM chips that implement "address overflow" are ones
-	 * like Catalyst 24WC04/08/16 which has 9/10/11 bits of
-	 * address and the extra bits end up in the "chip address"
-	 * bit slots. This makes a 24WC08 (1Kbyte) chip look like
-	 * four 256 byte chips.
-	 *
-	 * Note that we consider the length of the address field to
-	 * still be one byte because the extra address bits are
-	 * hidden in the chip address.
-	 */
-	if( alen > 0 )
-		chip |= ((addr >> (alen * 8)) & CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW);
-#endif
-
-	return (i2c_transfer1( 0, chip<<1, &xaddr[4-alen], alen, buffer, len ) != 0);
-}
-
-/*-----------------------------------------------------------------------
- * Read a register
- */
-uchar i2c_reg_read1(uchar i2c_addr, uchar reg)
-{
-	uchar buf;
-
-	i2c_read1(i2c_addr, reg, 1, &buf, (uchar)1);
-
-	return(buf);
-}
-
-/*-----------------------------------------------------------------------
- * Write a register
- */
-void i2c_reg_write1(uchar i2c_addr, uchar reg, uchar val)
-{
-	i2c_write1(i2c_addr, reg, 1, &val, 1);
-}
-
-
-int do_i2c1_probe(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-	int j;
-#if defined(CONFIG_SYS_I2C_NOPROBES)
-	int k, skip;
-#endif
-
-	puts ("Valid chip addresses:");
-	for(j = 0; j < 128; j++) {
-#if defined(CONFIG_SYS_I2C_NOPROBES)
-		skip = 0;
-		for (k = 0; k < sizeof(i2c_no_probes); k++){
-			if (j == i2c_no_probes[k]){
-				skip = 1;
-				break;
-			}
-		}
-		if (skip)
-			continue;
-#endif
-		if(i2c_probe1(j) == 0) {
-			printf(" %02X", j);
-		}
-	}
-	putc ('\n');
-
-#if defined(CONFIG_SYS_I2C_NOPROBES)
-	puts ("Excluded chip addresses:");
-	for( k = 0; k < sizeof(i2c_no_probes); k++ )
-		printf(" %02X", i2c_no_probes[k] );
-	putc ('\n');
-#endif
-
-	return 0;
-}
-
-U_BOOT_CMD(
-	iprobe1,	1,	1,	do_i2c1_probe,
-	"probe to discover valid I2C chip addresses",
-	""
-);
-
-#endif	/* CONFIG_I2C_BUS1 */
diff --git a/board/sandburst/common/ppc440gx_i2c.h b/board/sandburst/common/ppc440gx_i2c.h
deleted file mode 100644
index b1179bcc4a..0000000000
--- a/board/sandburst/common/ppc440gx_i2c.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- *  Copyright (C) 2005 Sandburst Corporation
- *
- * SPDX-License-Identifier:	GPL-2.0+ 
- */
-
-/*
- * Ported from i2c driver for ppc4xx by AS HARNOIS by
- * Travis B. Sawyer
- * Sandburst Corporation
- */
-#include <common.h>
-#include <asm/ppc4xx.h>
-#include <asm/ppc4xx-i2c.h>
-#include <i2c.h>
-
-#ifdef CONFIG_HARD_I2C
-
-#define I2C_BUS1_BASE_ADDR (CONFIG_SYS_PERIPHERAL_BASE + 0x00000500)
-#define	   I2C_REGISTERS_BUS1_BASE_ADDRESS I2C_BUS1_BASE_ADDR
-#define    IIC_MDBUF1	(&i2c->mdbuf)
-#define    IIC_SDBUF1	(&i2c->sdbuf)
-#define    IIC_LMADR1	(&i2c->lmadr)
-#define    IIC_HMADR1	(&i2c->hmadr)
-#define    IIC_CNTL1	(&i2c->cntl)
-#define    IIC_MDCNTL1	(&i2c->mdcntl)
-#define    IIC_STS1	(&i2c->sts)
-#define    IIC_EXTSTS1	(&i2c->extsts)
-#define    IIC_LSADR1	(&i2c->lsadr)
-#define    IIC_HSADR1	(&i2c->hsadr)
-#define    IIC_CLKDIV1	(&i2c->clkdiv)
-#define    IIC_INTRMSK1	(&i2c->intrmsk)
-#define    IIC_XFRCNT1	(&i2c->xfrcnt)
-#define    IIC_XTCNTLSS1	(&i2c->xtcntlss)
-#define    IIC_DIRECTCNTL1 (&i2c->directcntl)
-
-void i2c1_init (int speed, int slaveadd);
-int i2c_probe1 (uchar chip);
-int i2c_read1 (uchar chip, uint addr, int alen, uchar * buffer, int len);
-int i2c_write1 (uchar chip, uint addr, int alen, uchar * buffer, int len);
-uchar i2c_reg_read1(uchar i2c_addr, uchar reg);
-void i2c_reg_write1(uchar i2c_addr, uchar reg, uchar val);
-
-#endif	/* CONFIG_HARD_I2C */
diff --git a/board/sandburst/common/sb_common.c b/board/sandburst/common/sb_common.c
index 12334dfdd1..b579812ccf 100644
--- a/board/sandburst/common/sb_common.c
+++ b/board/sandburst/common/sb_common.c
@@ -10,7 +10,6 @@
 #include <asm/io.h>
 #include <spd_sdram.h>
 #include <i2c.h>
-#include "ppc440gx_i2c.h"
 #include "sb_common.h"
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -68,7 +67,7 @@ unsigned short sbcommon_get_serial_number(void)
 
 	/* Get the board serial number from eeprom */
 	/* Initialize I2C */
-	i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+	i2c_set_bus_num(0);
 
 	/* Read 256 bytes in EEPROM */
 	i2c_read (0x50, 0, 1, buff, 0x100);
@@ -94,85 +93,87 @@ void sbcommon_fans(void)
 	 * Attempt to turn on 2 of the fans...
 	 * Need to go through the bridge
 	 */
+	i2c_set_bus_num(1);
 	puts ("FANS:  ");
 
 	/* select fan4 through the bridge */
-	i2c_reg_write1(0x73, /* addr */
-		       0x00, /* reg */
-		       0x08); /* val = bus 4 */
+	i2c_reg_write(0x73, /* addr */
+		      0x00, /* reg */
+		      0x08); /* val = bus 4 */
 
 	/* Turn on FAN 4 */
-	i2c_reg_write1(0x2e,
-		       1,
-		       0x80);
+	i2c_reg_write(0x2e,
+		      1,
+		      0x80);
 
-	i2c_reg_write1(0x2e,
-		       0,
-		       0x19);
+	i2c_reg_write(0x2e,
+		      0,
+		      0x19);
 
 	/* Deselect bus 4 on the bridge */
-	i2c_reg_write1(0x73,
-		       0x00,
-		       0x00);
+	i2c_reg_write(0x73,
+		      0x00,
+		      0x00);
 
 	/* select fan3 through the bridge */
-	i2c_reg_write1(0x73, /* addr */
-		       0x00, /* reg */
-		       0x04); /* val = bus 3 */
+	i2c_reg_write(0x73, /* addr */
+		      0x00, /* reg */
+		      0x04); /* val = bus 3 */
 
 	/* Turn on FAN 3 */
-	i2c_reg_write1(0x2e,
-		       1,
-		       0x80);
+	i2c_reg_write(0x2e,
+		      1,
+		      0x80);
 
-	i2c_reg_write1(0x2e,
-		       0,
-		       0x19);
+	i2c_reg_write(0x2e,
+		      0,
+		      0x19);
 
 	/* Deselect bus 3 on the bridge */
-	i2c_reg_write1(0x73,
-		       0x00,
-		       0x00);
+	i2c_reg_write(0x73,
+		      0x00,
+		      0x00);
 
 	/* select fan2 through the bridge */
-	i2c_reg_write1(0x73, /* addr */
-		       0x00, /* reg */
-		       0x02); /* val = bus 4 */
+	i2c_reg_write(0x73, /* addr */
+		      0x00, /* reg */
+		      0x02); /* val = bus 4 */
 
 	/* Turn on FAN 2 */
-	i2c_reg_write1(0x2e,
-		       1,
-		       0x80);
+	i2c_reg_write(0x2e,
+		      1,
+		      0x80);
 
-	i2c_reg_write1(0x2e,
-		       0,
-		       0x19);
+	i2c_reg_write(0x2e,
+		      0,
+		      0x19);
 
 	/* Deselect bus 2 on the bridge */
-	i2c_reg_write1(0x73,
-		       0x00,
-		       0x00);
+	i2c_reg_write(0x73,
+		      0x00,
+		      0x00);
 
 	/* select fan1 through the bridge */
-	i2c_reg_write1(0x73, /* addr */
-		       0x00, /* reg */
-		       0x01); /* val = bus 0 */
+	i2c_reg_write(0x73, /* addr */
+		      0x00, /* reg */
+		      0x01); /* val = bus 0 */
 
 	/* Turn on FAN 1 */
-	i2c_reg_write1(0x2e,
-		       1,
-		       0x80);
+	i2c_reg_write(0x2e,
+		      1,
+		      0x80);
 
-	i2c_reg_write1(0x2e,
-		       0,
-		       0x19);
+	i2c_reg_write(0x2e,
+		      0,
+		      0x19);
 
 	/* Deselect bus 1 on the bridge */
-	i2c_reg_write1(0x73,
-		       0x00,
-		       0x00);
+	i2c_reg_write(0x73,
+		      0x00,
+		      0x00);
 
 	puts ("on\n");
+	i2c_set_bus_num(0);
 
 	return;
 
@@ -303,7 +304,7 @@ void board_get_enetaddr(int macaddr_idx, uchar *enet)
 	if (0 == macaddr_idx) {
 
 		/* Initialize I2C */
-		i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+		i2c_set_bus_num(0);
 
 		/* Read 256 bytes in EEPROM */
 		i2c_read (0x50, 0, 1, buff, 0x100);
diff --git a/board/sandburst/common/sb_common.h b/board/sandburst/common/sb_common.h
index c86061c414..8716eacd84 100644
--- a/board/sandburst/common/sb_common.h
+++ b/board/sandburst/common/sb_common.h
@@ -12,7 +12,6 @@
 #include <asm/io.h>
 #include <spd_sdram.h>
 #include <i2c.h>
-#include "ppc440gx_i2c.h"
 
 /*
  * GPIO Settings
diff --git a/board/sandburst/karef/Makefile b/board/sandburst/karef/Makefile
index 9cceb47806..af758f947e 100644
--- a/board/sandburst/karef/Makefile
+++ b/board/sandburst/karef/Makefile
@@ -24,8 +24,7 @@ CFLAGS += -DBUILDUSER='"$(BUILDUSER)"'
 
 LIB	= $(obj)lib$(BOARD).o
 
-COBJS	= $(BOARD).o ../common/flash.o ../common/ppc440gx_i2c.o \
-	../common/sb_common.o
+COBJS	= $(BOARD).o ../common/flash.o ../common/sb_common.o
 
 SOBJS	= init.o
 
diff --git a/board/sandburst/karef/karef.c b/board/sandburst/karef/karef.c
index 93681c1871..683d68b933 100644
--- a/board/sandburst/karef/karef.c
+++ b/board/sandburst/karef/karef.c
@@ -16,7 +16,6 @@
 #include <spd_sdram.h>
 #include <i2c.h>
 #include "../common/sb_common.h"
-#include "../common/ppc440gx_i2c.h"
 #if defined(CONFIG_HAS_ETH0) || defined(CONFIG_HAS_ETH1) || \
     defined(CONFIG_HAS_ETH2) || defined(CONFIG_HAS_ETH3)
 #include <net.h>
@@ -322,11 +321,6 @@ int checkboard (void)
  ************************************************************************/
 int misc_init_f (void)
 {
-	/* Turn on i2c bus 1 */
-	puts ("I2C1:  ");
-	i2c1_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
-	puts ("ready\n");
-
 	/* Turn on fans 3 & 4 */
 	sbcommon_fans();
 
diff --git a/board/sandburst/metrobox/Makefile b/board/sandburst/metrobox/Makefile
index 4dbd6ed314..163f2b98da 100644
--- a/board/sandburst/metrobox/Makefile
+++ b/board/sandburst/metrobox/Makefile
@@ -23,8 +23,7 @@ CFLAGS += -DBUILDUSER='"$(BUILDUSER)"'
 
 LIB	= $(obj)lib$(BOARD).o
 
-COBJS	= $(BOARD).o ../common/flash.o ../common/ppc440gx_i2c.o \
-	../common/sb_common.o
+COBJS	= $(BOARD).o ../common/flash.o ../common/sb_common.o
 SOBJS	= init.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
diff --git a/board/sandburst/metrobox/metrobox.c b/board/sandburst/metrobox/metrobox.c
index 8d5079619e..5bc7f2f433 100644
--- a/board/sandburst/metrobox/metrobox.c
+++ b/board/sandburst/metrobox/metrobox.c
@@ -14,7 +14,6 @@
 #include <asm/io.h>
 #include <spd_sdram.h>
 #include <i2c.h>
-#include "../common/ppc440gx_i2c.h"
 #include "../common/sb_common.h"
 #if defined(CONFIG_HAS_ETH0) || defined(CONFIG_HAS_ETH1) || \
     defined(CONFIG_HAS_ETH2) || defined(CONFIG_HAS_ETH3)
@@ -289,11 +288,6 @@ int checkboard (void)
  ************************************************************************/
 int misc_init_f (void)
 {
-	/* Turn on i2c bus 1 */
-	puts ("I2C1:  ");
-	i2c1_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
-	puts ("ready\n");
-
 	/* Turn on fans */
 	sbcommon_fans();
 
diff --git a/board/tqc/tqm8260/tqm8260.c b/board/tqc/tqm8260/tqm8260.c
index 669e99ddde..c361f188f7 100644
--- a/board/tqc/tqm8260/tqm8260.c
+++ b/board/tqc/tqm8260/tqm8260.c
@@ -144,7 +144,7 @@ const iop_conf_t iop_conf_tab[4][32] = {
 	/* PD18 */ {   0,   0,   0,   1,   0,   0   }, /* PD19 */
 	/* PD17 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXPRTY */
 	/* PD16 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXPRTY */
-#if defined(CONFIG_SOFT_I2C)
+#if defined(CONFIG_SYS_I2C_SOFT)
 	/* PD15 */ {   1,   0,   0,   1,   1,   1   }, /* I2C SDA */
 	/* PD14 */ {   1,   0,   0,   1,   1,   1   }, /* I2C SCL */
 #else
diff --git a/board/tqc/tqm8272/tqm8272.c b/board/tqc/tqm8272/tqm8272.c
index b9dd4fa6b7..334fd6d74b 100644
--- a/board/tqc/tqm8272/tqm8272.c
+++ b/board/tqc/tqm8272/tqm8272.c
@@ -164,7 +164,7 @@ const iop_conf_t iop_conf_tab[4][32] = {
 	/* PD18 */ {   0,   0,	 0,   1,   0,	0   }, /* PD19 */
 	/* PD17 */ {   0,   1,	 0,   0,   0,	0   }, /* FCC1 ATMRXPRTY */
 	/* PD16 */ {   0,   1,	 0,   1,   0,	0   }, /* FCC1 ATMTXPRTY */
-#if defined(CONFIG_SOFT_I2C)
+#if defined(CONFIG_SYS_I2C_SOFT)
 	/* PD15 */ {   1,   0,	 0,   1,   1,	1   }, /* I2C SDA */
 	/* PD14 */ {   1,   0,	 0,   1,   1,	1   }, /* I2C SCL */
 #else
diff --git a/board/tqc/tqm8272/tqm8272.h b/board/tqc/tqm8272/tqm8272.h
index fbdbff68de..2205d51b06 100644
--- a/board/tqc/tqm8272/tqm8272.h
+++ b/board/tqc/tqm8272/tqm8272.h
@@ -34,4 +34,4 @@ typedef struct{
 
 static HWIB_INFO	hwinf = {0, 0, 1, 0, 1, 0, 0, 0, 0, 8272, 0 ,0,
 			 0, 0, 0, 0, 0, 0};
-#endif
+#endif	/* __CONFIG_H */
diff --git a/common/board_f.c b/common/board_f.c
index 3f8766bd72..0ada1afe16 100644
--- a/common/board_f.c
+++ b/common/board_f.c
@@ -245,7 +245,7 @@ void __dram_init_banksize(void)
 void dram_init_banksize(void)
 	__attribute__((weak, alias("__dram_init_banksize")));
 
-#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
+#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SYS_I2C)
 static int init_func_i2c(void)
 {
 	puts("I2C:   ");
@@ -903,7 +903,7 @@ static init_fnc_t init_sequence_f[] = {
 	misc_init_f,
 #endif
 	INIT_FUNC_WATCHDOG_RESET
-#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
+#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SYS_I2C)
 	init_func_i2c,
 #endif
 #if defined(CONFIG_HARD_SPI)
diff --git a/common/cmd_date.c b/common/cmd_date.c
index f0e66862ff..e3491662bc 100644
--- a/common/cmd_date.c
+++ b/common/cmd_date.c
@@ -34,8 +34,13 @@ static int do_date(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 	int old_bus;
 
 	/* switch to correct I2C bus */
+#ifdef CONFIG_SYS_I2C
+	old_bus = i2c_get_bus_num();
+	i2c_set_bus_num(CONFIG_SYS_RTC_BUS_NUM);
+#else
 	old_bus = I2C_GET_BUS();
 	I2C_SET_BUS(CONFIG_SYS_RTC_BUS_NUM);
+#endif
 
 	switch (argc) {
 	case 2:			/* set date & time */
@@ -81,7 +86,11 @@ static int do_date(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 	}
 
 	/* switch back to original I2C bus */
+#ifdef CONFIG_SYS_I2C
+	i2c_set_bus_num(old_bus);
+#else
 	I2C_SET_BUS(old_bus);
+#endif
 
 	return rcode;
 }
diff --git a/common/cmd_dtt.c b/common/cmd_dtt.c
index dc57744f89..7257f10fb1 100644
--- a/common/cmd_dtt.c
+++ b/common/cmd_dtt.c
@@ -57,8 +57,13 @@ int dtt_i2c(void)
 	/* Force a compilation error, if there are more then 32 sensors */
 	BUILD_BUG_ON(sizeof(sensors) > 32);
 	/* switch to correct I2C bus */
+#ifdef CONFIG_SYS_I2C
+	old_bus = i2c_get_bus_num();
+	i2c_set_bus_num(CONFIG_SYS_DTT_BUS_NUM);
+#else
 	old_bus = I2C_GET_BUS();
 	I2C_SET_BUS(CONFIG_SYS_DTT_BUS_NUM);
+#endif
 
 	_initialize_dtt();
 
@@ -70,8 +75,12 @@ int dtt_i2c(void)
 		printf("DTT%d: %i C\n", i + 1, dtt_get_temp(sensors[i]));
 
 	/* switch back to original I2C bus */
+#ifdef CONFIG_SYS_I2C
+	i2c_set_bus_num(old_bus);
+#else
 	I2C_SET_BUS(old_bus);
 #endif
+#endif
 
 	return 0;
 }
diff --git a/common/cmd_eeprom.c b/common/cmd_eeprom.c
index 1397636351..ef694d8f87 100644
--- a/common/cmd_eeprom.c
+++ b/common/cmd_eeprom.c
@@ -389,8 +389,7 @@ void eeprom_init  (void)
 #if defined(CONFIG_SPI) && !defined(CONFIG_ENV_EEPROM_IS_ON_I2C)
 	spi_init_f ();
 #endif
-#if defined(CONFIG_HARD_I2C) || \
-    defined(CONFIG_SOFT_I2C)
+#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SYS_I2C_SOFT)
 	i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
 #endif
 }
diff --git a/common/cmd_i2c.c b/common/cmd_i2c.c
index 1703ab41ac..29f5181baf 100644
--- a/common/cmd_i2c.c
+++ b/common/cmd_i2c.c
@@ -1,4 +1,9 @@
 /*
+ * (C) Copyright 2009
+ * Sergey Kubushyn, himself, ksi@koi8.net
+ *
+ * Changes for unified multibus/multiadapter I2C support.
+ *
  * (C) Copyright 2001
  * Gerald Van Baren, Custom IDEAS, vanbaren@cideas.com.
  *
@@ -69,6 +74,8 @@
 #include <asm/byteorder.h>
 #include <linux/compiler.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 /* Display values from last command.
  * Memory modify remembered values are different from display memory.
  */
@@ -87,7 +94,7 @@ static uint	i2c_mm_last_alen;
  * pairs.  The following macros take care of this */
 
 #if defined(CONFIG_SYS_I2C_NOPROBES)
-#if defined(CONFIG_I2C_MULTI_BUS)
+#if defined(CONFIG_SYS_I2C) || defined(CONFIG_I2C_MULTI_BUS)
 static struct
 {
 	uchar	bus;
@@ -103,17 +110,7 @@ static uchar i2c_no_probes[] = CONFIG_SYS_I2C_NOPROBES;
 #define COMPARE_BUS(b,i)	((b) == 0)	/* Make compiler happy */
 #define COMPARE_ADDR(a,i)	(i2c_no_probes[(i)] == (a))
 #define NO_PROBE_ADDR(i)	i2c_no_probes[(i)]
-#endif	/* CONFIG_MULTI_BUS */
-
-#define NUM_ELEMENTS_NOPROBE (sizeof(i2c_no_probes)/sizeof(i2c_no_probes[0]))
-#endif
-
-#if defined(CONFIG_I2C_MUX)
-static I2C_MUX_DEVICE	*i2c_mux_devices = NULL;
-static	int	i2c_mux_busid = CONFIG_SYS_MAX_I2C_BUS;
-
-DECLARE_GLOBAL_DATA_PTR;
-
+#endif	/* defined(CONFIG_SYS_I2C) */
 #endif
 
 #define DISP_LINE_LEN	16
@@ -128,7 +125,6 @@ DECLARE_GLOBAL_DATA_PTR;
 __weak
 void i2c_init_board(void)
 {
-	return;
 }
 
 /* TODO: Implement architecture-specific get/set functions */
@@ -145,6 +141,11 @@ void i2c_init_board(void)
  *
  * Returns I2C bus speed in Hz.
  */
+#if !defined(CONFIG_SYS_I2C)
+/*
+ * TODO: Implement architecture-specific get/set functions
+ * Should go away, if we switched completely to new multibus support
+ */
 __weak
 unsigned int i2c_get_bus_speed(void)
 {
@@ -172,6 +173,7 @@ int i2c_set_bus_speed(unsigned int speed)
 
 	return 0;
 }
+#endif
 
 /**
  * get_alen() - Small parser helper function to get address length
@@ -684,7 +686,7 @@ static int do_i2c_probe (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv
 	int found = 0;
 #if defined(CONFIG_SYS_I2C_NOPROBES)
 	int k, skip;
-	uchar bus = GET_BUS_NUM;
+	unsigned int bus = GET_BUS_NUM;
 #endif	/* NOPROBES */
 
 	if (argc == 2)
@@ -697,7 +699,7 @@ static int do_i2c_probe (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv
 
 #if defined(CONFIG_SYS_I2C_NOPROBES)
 		skip = 0;
-		for (k=0; k < NUM_ELEMENTS_NOPROBE; k++) {
+		for (k = 0; k < ARRAY_SIZE(i2c_no_probes); k++) {
 			if (COMPARE_BUS(bus, k) && COMPARE_ADDR(j, k)) {
 				skip = 1;
 				break;
@@ -715,7 +717,7 @@ static int do_i2c_probe (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv
 
 #if defined(CONFIG_SYS_I2C_NOPROBES)
 	puts ("Excluded chip addresses:");
-	for (k=0; k < NUM_ELEMENTS_NOPROBE; k++) {
+	for (k = 0; k < ARRAY_SIZE(i2c_no_probes); k++) {
 		if (COMPARE_BUS(bus,k))
 			printf(" %02X", NO_PROBE_ADDR(k));
 	}
@@ -1357,9 +1359,8 @@ int do_edid(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
 }
 #endif /* CONFIG_I2C_EDID */
 
-#if defined(CONFIG_I2C_MUX)
 /**
- * do_i2c_add_bus() - Handle the "i2c bus" command-line command
+ * do_i2c_show_bus() - Handle the "i2c bus" command-line command
  * @cmdtp:	Command data struct pointer
  * @flag:	Command flag
  * @argc:	Command-line argument count
@@ -1367,35 +1368,55 @@ int do_edid(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
  *
  * Returns zero always.
  */
-static int do_i2c_add_bus(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
+#if defined(CONFIG_SYS_I2C)
+int do_i2c_show_bus(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
-	int ret=0;
+	int	i;
+#ifndef CONFIG_SYS_I2C_DIRECT_BUS
+	int	j;
+#endif
 
 	if (argc == 1) {
 		/* show all busses */
-		I2C_MUX		*mux;
-		I2C_MUX_DEVICE	*device = i2c_mux_devices;
-
-		printf ("Busses reached over muxes:\n");
-		while (device != NULL) {
-			printf ("Bus ID: %x\n", device->busid);
-			printf ("  reached over Mux(es):\n");
-			mux = device->mux;
-			while (mux != NULL) {
-				printf ("    %s@%x ch: %x\n", mux->name, mux->chip, mux->channel);
-				mux = mux->next;
+		for (i = 0; i < CONFIG_SYS_NUM_I2C_BUSES; i++) {
+			printf("Bus %d:\t%s", i, I2C_ADAP_NR(i)->name);
+#ifndef CONFIG_SYS_I2C_DIRECT_BUS
+			for (j = 0; j < CONFIG_SYS_I2C_MAX_HOPS; j++) {
+				if (i2c_bus[i].next_hop[j].chip == 0)
+					break;
+				printf("->%s@0x%2x:%d",
+				       i2c_bus[i].next_hop[j].mux.name,
+				       i2c_bus[i].next_hop[j].chip,
+				       i2c_bus[i].next_hop[j].channel);
 			}
-			device = device->next;
+#endif
+			printf("\n");
 		}
 	} else {
-		(void)i2c_mux_ident_muxstring ((uchar *)argv[1]);
-		ret = 0;
+		/* show specific bus */
+		i = simple_strtoul(argv[1], NULL, 10);
+		if (i >= CONFIG_SYS_NUM_I2C_BUSES) {
+			printf("Invalid bus %d\n", i);
+			return -1;
+		}
+		printf("Bus %d:\t%s", i, I2C_ADAP_NR(i)->name);
+#ifndef CONFIG_SYS_I2C_DIRECT_BUS
+			for (j = 0; j < CONFIG_SYS_I2C_MAX_HOPS; j++) {
+				if (i2c_bus[i].next_hop[j].chip == 0)
+					break;
+				printf("->%s@0x%2x:%d",
+				       i2c_bus[i].next_hop[j].mux.name,
+				       i2c_bus[i].next_hop[j].chip,
+				       i2c_bus[i].next_hop[j].channel);
+			}
+#endif
+		printf("\n");
 	}
-	return ret;
+
+	return 0;
 }
-#endif  /* CONFIG_I2C_MUX */
+#endif
 
-#if defined(CONFIG_I2C_MULTI_BUS)
 /**
  * do_i2c_bus_num() - Handle the "i2c dev" command-line command
  * @cmdtp:	Command data struct pointer
@@ -1406,23 +1427,29 @@ static int do_i2c_add_bus(cmd_tbl_t * cmdtp, int flag, int argc, char * const ar
  * Returns zero on success, CMD_RET_USAGE in case of misuse and negative
  * on error.
  */
-static int do_i2c_bus_num(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
+#if defined(CONFIG_SYS_I2C) || defined(CONFIG_I2C_MULTI_BUS)
+int do_i2c_bus_num(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
-	int bus_idx, ret=0;
+	int		ret = 0;
+	unsigned int	bus_no;
 
 	if (argc == 1)
 		/* querying current setting */
 		printf("Current bus is %d\n", i2c_get_bus_num());
 	else {
-		bus_idx = simple_strtoul(argv[1], NULL, 10);
-		printf("Setting bus to %d\n", bus_idx);
-		ret = i2c_set_bus_num(bus_idx);
+		bus_no = simple_strtoul(argv[1], NULL, 10);
+		if (bus_no >= CONFIG_SYS_NUM_I2C_BUSES) {
+			printf("Invalid bus %d\n", bus_no);
+			return -1;
+		}
+		printf("Setting bus to %d\n", bus_no);
+		ret = i2c_set_bus_num(bus_no);
 		if (ret)
 			printf("Failure changing bus number (%d)\n", ret);
 	}
 	return ret;
 }
-#endif  /* CONFIG_I2C_MULTI_BUS */
+#endif  /* defined(CONFIG_SYS_I2C) */
 
 /**
  * do_i2c_bus_speed() - Handle the "i2c speed" command-line command
@@ -1492,16 +1519,21 @@ static int do_i2c_nm(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
  */
 static int do_i2c_reset(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
 {
+#if defined(CONFIG_SYS_I2C)
+	i2c_init(I2C_ADAP->speed, I2C_ADAP->slaveaddr);
+#else
 	i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+#endif
 	return 0;
 }
 
 static cmd_tbl_t cmd_i2c_sub[] = {
-#if defined(CONFIG_I2C_MUX)
-	U_BOOT_CMD_MKENT(bus, 1, 1, do_i2c_add_bus, "", ""),
-#endif  /* CONFIG_I2C_MUX */
+#if defined(CONFIG_SYS_I2C)
+	U_BOOT_CMD_MKENT(bus, 1, 1, do_i2c_show_bus, "", ""),
+#endif
 	U_BOOT_CMD_MKENT(crc32, 3, 1, do_i2c_crc, "", ""),
-#if defined(CONFIG_I2C_MULTI_BUS)
+#if defined(CONFIG_SYS_I2C) || \
+	defined(CONFIG_I2C_MULTI_BUS)
 	U_BOOT_CMD_MKENT(dev, 1, 1, do_i2c_bus_num, "", ""),
 #endif  /* CONFIG_I2C_MULTI_BUS */
 #if defined(CONFIG_I2C_EDID)
@@ -1560,11 +1592,12 @@ static int do_i2c(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
 /***************************************************/
 #ifdef CONFIG_SYS_LONGHELP
 static char i2c_help_text[] =
-#if defined(CONFIG_I2C_MUX)
-	"bus [muxtype:muxaddr:muxchannel] - add a new bus reached over muxes\ni2c "
-#endif  /* CONFIG_I2C_MUX */
+#if defined(CONFIG_SYS_I2C)
+	"bus [muxtype:muxaddr:muxchannel] - show I2C bus info\n"
+#endif
 	"crc32 chip address[.0, .1, .2] count - compute CRC32 checksum\n"
-#if defined(CONFIG_I2C_MULTI_BUS)
+#if defined(CONFIG_SYS_I2C) || \
+	defined(CONFIG_I2C_MULTI_BUS)
 	"i2c dev [dev] - show or set current I2C bus\n"
 #endif  /* CONFIG_I2C_MULTI_BUS */
 #if defined(CONFIG_I2C_EDID)
@@ -1590,225 +1623,3 @@ U_BOOT_CMD(
 	"I2C sub-system",
 	i2c_help_text
 );
-
-#if defined(CONFIG_I2C_MUX)
-static int i2c_mux_add_device(I2C_MUX_DEVICE *dev)
-{
-	I2C_MUX_DEVICE	*devtmp = i2c_mux_devices;
-
-	if (i2c_mux_devices == NULL) {
-		i2c_mux_devices = dev;
-		return 0;
-	}
-	while (devtmp->next != NULL)
-		devtmp = devtmp->next;
-
-	devtmp->next = dev;
-	return 0;
-}
-
-I2C_MUX_DEVICE	*i2c_mux_search_device(int id)
-{
-	I2C_MUX_DEVICE	*device = i2c_mux_devices;
-
-	while (device != NULL) {
-		if (device->busid == id)
-			return device;
-		device = device->next;
-	}
-	return NULL;
-}
-
-/* searches in the buf from *pos the next ':'.
- * returns:
- *     0 if found (with *pos = where)
- *   < 0 if an error occured
- *   > 0 if the end of buf is reached
- */
-static int i2c_mux_search_next (int *pos, uchar	*buf, int len)
-{
-	while ((buf[*pos] != ':') && (*pos < len)) {
-		*pos += 1;
-	}
-	if (*pos >= len)
-		return 1;
-	if (buf[*pos] != ':')
-		return -1;
-	return 0;
-}
-
-static int i2c_mux_get_busid (void)
-{
-	int	tmp = i2c_mux_busid;
-
-	i2c_mux_busid ++;
-	return tmp;
-}
-
-/* Analyses a Muxstring and immediately sends the
-   commands to the muxes. Runs from flash.
- */
-int i2c_mux_ident_muxstring_f (uchar *buf)
-{
-	int	pos = 0;
-	int	oldpos;
-	int	ret = 0;
-	int	len = strlen((char *)buf);
-	int	chip;
-	uchar	channel;
-	int	was = 0;
-
-	while (ret == 0) {
-		oldpos = pos;
-		/* search name */
-		ret = i2c_mux_search_next(&pos, buf, len);
-		if (ret != 0)
-			printf ("ERROR\n");
-		/* search address */
-		pos ++;
-		oldpos = pos;
-		ret = i2c_mux_search_next(&pos, buf, len);
-		if (ret != 0)
-			printf ("ERROR\n");
-		buf[pos] = 0;
-		chip = simple_strtoul((char *)&buf[oldpos], NULL, 16);
-		buf[pos] = ':';
-		/* search channel */
-		pos ++;
-		oldpos = pos;
-		ret = i2c_mux_search_next(&pos, buf, len);
-		if (ret < 0)
-			printf ("ERROR\n");
-		was = 0;
-		if (buf[pos] != 0) {
-			buf[pos] = 0;
-			was = 1;
-		}
-		channel = simple_strtoul((char *)&buf[oldpos], NULL, 16);
-		if (was)
-			buf[pos] = ':';
-		if (i2c_write(chip, 0, 0, &channel, 1) != 0) {
-			printf ("Error setting Mux: chip:%x channel: \
-				%x\n", chip, channel);
-			return -1;
-		}
-		pos ++;
-		oldpos = pos;
-
-	}
-	i2c_init_board();
-
-	return 0;
-}
-
-/* Analyses a Muxstring and if this String is correct
- * adds a new I2C Bus.
- */
-I2C_MUX_DEVICE *i2c_mux_ident_muxstring (uchar *buf)
-{
-	I2C_MUX_DEVICE	*device;
-	I2C_MUX		*mux;
-	int	pos = 0;
-	int	oldpos;
-	int	ret = 0;
-	int	len = strlen((char *)buf);
-	int	was = 0;
-
-	device = (I2C_MUX_DEVICE *)malloc (sizeof(I2C_MUX_DEVICE));
-	device->mux = NULL;
-	device->busid = i2c_mux_get_busid ();
-	device->next = NULL;
-	while (ret == 0) {
-		mux = (I2C_MUX *)malloc (sizeof(I2C_MUX));
-		mux->next = NULL;
-		/* search name of mux */
-		oldpos = pos;
-		ret = i2c_mux_search_next(&pos, buf, len);
-		if (ret != 0)
-			printf ("%s no name.\n", __FUNCTION__);
-		mux->name = (char *)malloc (pos - oldpos + 1);
-		memcpy (mux->name, &buf[oldpos], pos - oldpos);
-		mux->name[pos - oldpos] = 0;
-		/* search address */
-		pos ++;
-		oldpos = pos;
-		ret = i2c_mux_search_next(&pos, buf, len);
-		if (ret != 0)
-			printf ("%s no mux address.\n", __FUNCTION__);
-		buf[pos] = 0;
-		mux->chip = simple_strtoul((char *)&buf[oldpos], NULL, 16);
-		buf[pos] = ':';
-		/* search channel */
-		pos ++;
-		oldpos = pos;
-		ret = i2c_mux_search_next(&pos, buf, len);
-		if (ret < 0)
-			printf ("%s no mux channel.\n", __FUNCTION__);
-		was = 0;
-		if (buf[pos] != 0) {
-			buf[pos] = 0;
-			was = 1;
-		}
-		mux->channel = simple_strtoul((char *)&buf[oldpos], NULL, 16);
-		if (was)
-			buf[pos] = ':';
-		if (device->mux == NULL)
-			device->mux = mux;
-		else {
-			I2C_MUX		*muxtmp = device->mux;
-			while (muxtmp->next != NULL) {
-				muxtmp = muxtmp->next;
-			}
-			muxtmp->next = mux;
-		}
-		pos ++;
-		oldpos = pos;
-	}
-	if (ret > 0) {
-		/* Add Device */
-		i2c_mux_add_device (device);
-		return device;
-	}
-
-	return NULL;
-}
-
-int i2x_mux_select_mux(int bus)
-{
-	I2C_MUX_DEVICE  *dev;
-	I2C_MUX		*mux;
-
-	if ((gd->flags & GD_FLG_RELOC) != GD_FLG_RELOC) {
-		/* select Default Mux Bus */
-#if defined(CONFIG_SYS_I2C_IVM_BUS)
-		i2c_mux_ident_muxstring_f ((uchar *)CONFIG_SYS_I2C_IVM_BUS);
-#else
-		{
-		unsigned char *buf;
-		buf = (unsigned char *) getenv("EEprom_ivm");
-		if (buf != NULL)
-			i2c_mux_ident_muxstring_f (buf);
-		}
-#endif
-		return 0;
-	}
-	dev = i2c_mux_search_device(bus);
-	if (dev == NULL)
-		return -1;
-
-	mux = dev->mux;
-	while (mux != NULL) {
-		/* do deblocking on each level of mux, before mux config */
-		i2c_init_board();
-		if (i2c_write(mux->chip, 0, 0, &mux->channel, 1) != 0) {
-			printf ("Error setting Mux: chip:%x channel: \
-				%x\n", mux->chip, mux->channel);
-			return -1;
-		}
-		mux = mux->next;
-	}
-	/* do deblocking on each level of mux and after mux config */
-	i2c_init_board();
-	return 0;
-}
-#endif /* CONFIG_I2C_MUX */
diff --git a/common/env_eeprom.c b/common/env_eeprom.c
index f5882bcfcf..149370f834 100644
--- a/common/env_eeprom.c
+++ b/common/env_eeprom.c
@@ -33,24 +33,8 @@ static int eeprom_bus_read(unsigned dev_addr, unsigned offset,
 #if defined(CONFIG_I2C_ENV_EEPROM_BUS)
 	int old_bus = i2c_get_bus_num();
 
-	if (gd->flags & GD_FLG_RELOC) {
-		if (env_eeprom_bus == -1) {
-			I2C_MUX_DEVICE *dev = NULL;
-			dev = i2c_mux_ident_muxstring(
-				(uchar *)CONFIG_I2C_ENV_EEPROM_BUS);
-			if (dev != NULL)
-				env_eeprom_bus = dev->busid;
-			else
-				printf("error adding env eeprom bus.\n");
-		}
-		if (old_bus != env_eeprom_bus) {
-			i2c_set_bus_num(env_eeprom_bus);
-			old_bus = env_eeprom_bus;
-		}
-	} else {
-		rcode = i2c_mux_ident_muxstring_f(
-				(uchar *)CONFIG_I2C_ENV_EEPROM_BUS);
-	}
+	if (old_bus != CONFIG_I2C_ENV_EEPROM_BUS)
+		i2c_set_bus_num(CONFIG_I2C_ENV_EEPROM_BUS);
 #endif
 
 	rcode = eeprom_read(dev_addr, offset, buffer, cnt);
@@ -59,6 +43,7 @@ static int eeprom_bus_read(unsigned dev_addr, unsigned offset,
 	if (old_bus != env_eeprom_bus)
 		i2c_set_bus_num(old_bus);
 #endif
+
 	return rcode;
 }
 
@@ -69,9 +54,12 @@ static int eeprom_bus_write(unsigned dev_addr, unsigned offset,
 #if defined(CONFIG_I2C_ENV_EEPROM_BUS)
 	int old_bus = i2c_get_bus_num();
 
-	rcode = i2c_mux_ident_muxstring_f((uchar *)CONFIG_I2C_ENV_EEPROM_BUS);
+	if (old_bus != CONFIG_I2C_ENV_EEPROM_BUS)
+		i2c_set_bus_num(CONFIG_I2C_ENV_EEPROM_BUS);
 #endif
+
 	rcode = eeprom_write(dev_addr, offset, buffer, cnt);
+
 #if defined(CONFIG_I2C_ENV_EEPROM_BUS)
 	i2c_set_bus_num(old_bus);
 #endif
diff --git a/common/stdio.c b/common/stdio.c
index 4ea8c0cedf..721e9a1444 100644
--- a/common/stdio.c
+++ b/common/stdio.c
@@ -1,4 +1,8 @@
 /*
+ * Copyright (C) 2009 Sergey Kubushyn <ksi@koi8.net>
+ *
+ * Changes for multibus/multiadapter I2C support.
+ *
  * (C) Copyright 2000
  * Paolo Scaffardi, AIRVENT SAM s.p.a - RIMINI(ITALY), arsenio@tin.it
  *
@@ -14,7 +18,8 @@
 #ifdef CONFIG_LOGBUFFER
 #include <logbuff.h>
 #endif
-#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
+
+#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SYS_I2C)
 #include <i2c.h>
 #endif
 
@@ -194,9 +199,13 @@ int stdio_init (void)
 #ifdef CONFIG_ARM_DCC
 	drv_arm_dcc_init ();
 #endif
-#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
+#ifdef CONFIG_SYS_I2C
+	i2c_init_all();
+#else
+#if defined(CONFIG_HARD_I2C)
 	i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
 #endif
+#endif
 #ifdef CONFIG_LCD
 	drv_lcd_init ();
 #endif
diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile
index 4ffbfdde3c..37ccbd1423 100644
--- a/drivers/i2c/Makefile
+++ b/drivers/i2c/Makefile
@@ -12,7 +12,6 @@ LIB	:= $(obj)libi2c.o
 COBJS-$(CONFIG_BFIN_TWI_I2C) += bfin-twi_i2c.o
 COBJS-$(CONFIG_DRIVER_DAVINCI_I2C) += davinci_i2c.o
 COBJS-$(CONFIG_DW_I2C) += designware_i2c.o
-COBJS-$(CONFIG_FSL_I2C) += fsl_i2c.o
 COBJS-$(CONFIG_I2C_MVTWSI) += mvtwsi.o
 COBJS-$(CONFIG_I2C_MV) += mv_i2c.o
 COBJS-$(CONFIG_I2C_MXC) += mxc_i2c.o
@@ -21,15 +20,18 @@ COBJS-$(CONFIG_DRIVER_OMAP1510_I2C) += omap1510_i2c.o
 COBJS-$(CONFIG_DRIVER_OMAP24XX_I2C) += omap24xx_i2c.o
 COBJS-$(CONFIG_DRIVER_OMAP34XX_I2C) += omap24xx_i2c.o
 COBJS-$(CONFIG_PCA9564_I2C) += pca9564_i2c.o
-COBJS-$(CONFIG_PPC4XX_I2C) += ppc4xx_i2c.o
 COBJS-$(CONFIG_DRIVER_S3C24X0_I2C) += s3c24x0_i2c.o
 COBJS-$(CONFIG_S3C44B0_I2C) += s3c44b0_i2c.o
-COBJS-$(CONFIG_SOFT_I2C) += soft_i2c.o
-COBJS-$(CONFIG_TEGRA_I2C) += tegra_i2c.o
 COBJS-$(CONFIG_TSI108_I2C) += tsi108_i2c.o
 COBJS-$(CONFIG_U8500_I2C) += u8500_i2c.o
 COBJS-$(CONFIG_SH_I2C) += sh_i2c.o
 COBJS-$(CONFIG_SH_SH7734_I2C) += sh_sh7734_i2c.o
+COBJS-$(CONFIG_SYS_I2C) += i2c_core.o
+COBJS-$(CONFIG_SYS_I2C_FSL) += fsl_i2c.o
+COBJS-$(CONFIG_SYS_I2C_FTI2C010) += fti2c010.o
+COBJS-$(CONFIG_SYS_I2C_PPC4XX) += ppc4xx_i2c.o
+COBJS-$(CONFIG_SYS_I2C_SOFT) += soft_i2c.o
+COBJS-$(CONFIG_SYS_I2C_TEGRA) += tegra_i2c.o
 COBJS-$(CONFIG_ZYNQ_I2C) += zynq_i2c.o
 
 COBJS	:= $(COBJS-y)
diff --git a/drivers/i2c/fsl_i2c.c b/drivers/i2c/fsl_i2c.c
index 5d7e010319..38455e1c66 100644
--- a/drivers/i2c/fsl_i2c.c
+++ b/drivers/i2c/fsl_i2c.c
@@ -1,6 +1,9 @@
 /*
  * Copyright 2006,2009 Freescale Semiconductor, Inc.
  *
+ * 2012, Heiko Schocher, DENX Software Engineering, hs@denx.de.
+ * Changes for multibus/multiadapter I2C support.
+ *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
  * Version 2 as published by the Free Software Foundation.
@@ -17,12 +20,8 @@
  */
 
 #include <common.h>
-
-#ifdef CONFIG_HARD_I2C
-
 #include <command.h>
 #include <i2c.h>		/* Functional interface */
-
 #include <asm/io.h>
 #include <asm/fsl_i2c.h>	/* HW definitions */
 
@@ -47,25 +46,10 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-/* Initialize the bus pointer to whatever one the SPD EEPROM is on.
- * Default is bus 0.  This is necessary because the DDR initialization
- * runs from ROM, and we can't switch buses because we can't modify
- * the global variables.
- */
-#ifndef CONFIG_SYS_SPD_BUS_NUM
-#define CONFIG_SYS_SPD_BUS_NUM 0
-#endif
-static unsigned int i2c_bus_num __attribute__ ((section (".data"))) = CONFIG_SYS_SPD_BUS_NUM;
-#if defined(CONFIG_I2C_MUX)
-static unsigned int i2c_bus_num_mux __attribute__ ((section ("data"))) = 0;
-#endif
-
-static unsigned int i2c_bus_speed[2] = {CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SPEED};
-
 static const struct fsl_i2c *i2c_dev[2] = {
-	(struct fsl_i2c *) (CONFIG_SYS_IMMR + CONFIG_SYS_I2C_OFFSET),
-#ifdef CONFIG_SYS_I2C2_OFFSET
-	(struct fsl_i2c *) (CONFIG_SYS_IMMR + CONFIG_SYS_I2C2_OFFSET)
+	(struct fsl_i2c *)(CONFIG_SYS_IMMR + CONFIG_SYS_FSL_I2C_OFFSET),
+#ifdef CONFIG_SYS_FSL_I2C2_OFFSET
+	(struct fsl_i2c *)(CONFIG_SYS_IMMR + CONFIG_SYS_FSL_I2C2_OFFSET)
 #endif
 };
 
@@ -222,12 +206,9 @@ static unsigned int get_i2c_clock(int bus)
 		return gd->arch.i2c1_clk;	/* I2C1 clock */
 }
 
-void
-i2c_init(int speed, int slaveadd)
+static void fsl_i2c_init(struct i2c_adapter *adap, int speed, int slaveadd)
 {
 	const struct fsl_i2c *dev;
-	unsigned int temp;
-	int bus_num, i;
 
 #ifdef CONFIG_SYS_I2C_INIT_BOARD
 	/* Call board specific i2c bus reset routine before accessing the
@@ -236,23 +217,14 @@ i2c_init(int speed, int slaveadd)
 	*/
 	i2c_init_board();
 #endif
-#ifdef CONFIG_SYS_I2C2_OFFSET
-	bus_num = 2;
-#else
-	bus_num = 1;
-#endif
-	for (i = 0; i < bus_num; i++) {
-		dev = i2c_dev[i];
-
-		writeb(0, &dev->cr);		/* stop I2C controller */
-		udelay(5);			/* let it shutdown in peace */
-		temp = set_i2c_bus_speed(dev, get_i2c_clock(i), speed);
-		if (gd->flags & GD_FLG_RELOC)
-			i2c_bus_speed[i] = temp;
-		writeb(slaveadd << 1, &dev->adr);/* write slave address */
-		writeb(0x0, &dev->sr);		/* clear status register */
-		writeb(I2C_CR_MEN, &dev->cr);	/* start I2C controller */
-	}
+	dev = (struct fsl_i2c *)i2c_dev[adap->hwadapnr];
+
+	writeb(0, &dev->cr);		/* stop I2C controller */
+	udelay(5);			/* let it shutdown in peace */
+	set_i2c_bus_speed(dev, get_i2c_clock(adap->hwadapnr), speed);
+	writeb(slaveadd << 1, &dev->adr);/* write slave address */
+	writeb(0x0, &dev->sr);		/* clear status register */
+	writeb(I2C_CR_MEN, &dev->cr);	/* start I2C controller */
 
 #ifdef CONFIG_SYS_I2C_BOARD_LATE_INIT
 	/* Call board specific i2c bus reset routine AFTER the bus has been
@@ -265,12 +237,13 @@ i2c_init(int speed, int slaveadd)
 }
 
 static int
-i2c_wait4bus(void)
+i2c_wait4bus(struct i2c_adapter *adap)
 {
+	struct fsl_i2c *dev = (struct fsl_i2c *)i2c_dev[adap->hwadapnr];
 	unsigned long long timeval = get_ticks();
 	const unsigned long long timeout = usec2ticks(CONFIG_I2C_MBB_TIMEOUT);
 
-	while (readb(&i2c_dev[i2c_bus_num]->sr) & I2C_SR_MBB) {
+	while (readb(&dev->sr) & I2C_SR_MBB) {
 		if ((get_ticks() - timeval) > timeout)
 			return -1;
 	}
@@ -279,20 +252,21 @@ i2c_wait4bus(void)
 }
 
 static __inline__ int
-i2c_wait(int write)
+i2c_wait(struct i2c_adapter *adap, int write)
 {
 	u32 csr;
 	unsigned long long timeval = get_ticks();
 	const unsigned long long timeout = usec2ticks(CONFIG_I2C_TIMEOUT);
+	struct fsl_i2c *dev = (struct fsl_i2c *)i2c_dev[adap->hwadapnr];
 
 	do {
-		csr = readb(&i2c_dev[i2c_bus_num]->sr);
+		csr = readb(&dev->sr);
 		if (!(csr & I2C_SR_MIF))
 			continue;
 		/* Read again to allow register to stabilise */
-		csr = readb(&i2c_dev[i2c_bus_num]->sr);
+		csr = readb(&dev->sr);
 
-		writeb(0x0, &i2c_dev[i2c_bus_num]->sr);
+		writeb(0x0, &dev->sr);
 
 		if (csr & I2C_SR_MAL) {
 			debug("i2c_wait: MAL\n");
@@ -317,29 +291,32 @@ i2c_wait(int write)
 }
 
 static __inline__ int
-i2c_write_addr (u8 dev, u8 dir, int rsta)
+i2c_write_addr(struct i2c_adapter *adap, u8 dev, u8 dir, int rsta)
 {
+	struct fsl_i2c *device = (struct fsl_i2c *)i2c_dev[adap->hwadapnr];
+
 	writeb(I2C_CR_MEN | I2C_CR_MSTA | I2C_CR_MTX
 	       | (rsta ? I2C_CR_RSTA : 0),
-	       &i2c_dev[i2c_bus_num]->cr);
+	       &device->cr);
 
-	writeb((dev << 1) | dir, &i2c_dev[i2c_bus_num]->dr);
+	writeb((dev << 1) | dir, &device->dr);
 
-	if (i2c_wait(I2C_WRITE_BIT) < 0)
+	if (i2c_wait(adap, I2C_WRITE_BIT) < 0)
 		return 0;
 
 	return 1;
 }
 
 static __inline__ int
-__i2c_write(u8 *data, int length)
+__i2c_write(struct i2c_adapter *adap, u8 *data, int length)
 {
+	struct fsl_i2c *dev = (struct fsl_i2c *)i2c_dev[adap->hwadapnr];
 	int i;
 
 	for (i = 0; i < length; i++) {
-		writeb(data[i], &i2c_dev[i2c_bus_num]->dr);
+		writeb(data[i], &dev->dr);
 
-		if (i2c_wait(I2C_WRITE_BIT) < 0)
+		if (i2c_wait(adap, I2C_WRITE_BIT) < 0)
 			break;
 	}
 
@@ -347,57 +324,60 @@ __i2c_write(u8 *data, int length)
 }
 
 static __inline__ int
-__i2c_read(u8 *data, int length)
+__i2c_read(struct i2c_adapter *adap, u8 *data, int length)
 {
+	struct fsl_i2c *dev = (struct fsl_i2c *)i2c_dev[adap->hwadapnr];
 	int i;
 
 	writeb(I2C_CR_MEN | I2C_CR_MSTA | ((length == 1) ? I2C_CR_TXAK : 0),
-	       &i2c_dev[i2c_bus_num]->cr);
+	       &dev->cr);
 
 	/* dummy read */
-	readb(&i2c_dev[i2c_bus_num]->dr);
+	readb(&dev->dr);
 
 	for (i = 0; i < length; i++) {
-		if (i2c_wait(I2C_READ_BIT) < 0)
+		if (i2c_wait(adap, I2C_READ_BIT) < 0)
 			break;
 
 		/* Generate ack on last next to last byte */
 		if (i == length - 2)
 			writeb(I2C_CR_MEN | I2C_CR_MSTA | I2C_CR_TXAK,
-			       &i2c_dev[i2c_bus_num]->cr);
+			       &dev->cr);
 
 		/* Do not generate stop on last byte */
 		if (i == length - 1)
 			writeb(I2C_CR_MEN | I2C_CR_MSTA | I2C_CR_MTX,
-			       &i2c_dev[i2c_bus_num]->cr);
+			       &dev->cr);
 
-		data[i] = readb(&i2c_dev[i2c_bus_num]->dr);
+		data[i] = readb(&dev->dr);
 	}
 
 	return i;
 }
 
-int
-i2c_read(u8 dev, uint addr, int alen, u8 *data, int length)
+static int
+fsl_i2c_read(struct i2c_adapter *adap, u8 dev, uint addr, int alen, u8 *data,
+	     int length)
 {
+	struct fsl_i2c *device = (struct fsl_i2c *)i2c_dev[adap->hwadapnr];
 	int i = -1; /* signal error */
 	u8 *a = (u8*)&addr;
 
-	if (i2c_wait4bus() < 0)
+	if (i2c_wait4bus(adap) < 0)
 		return -1;
 
 	if ((!length || alen > 0)
-	    && i2c_write_addr(dev, I2C_WRITE_BIT, 0) != 0
-	    && __i2c_write(&a[4 - alen], alen) == alen)
+	    && i2c_write_addr(adap, dev, I2C_WRITE_BIT, 0) != 0
+	    && __i2c_write(adap, &a[4 - alen], alen) == alen)
 		i = 0; /* No error so far */
 
 	if (length &&
-	    i2c_write_addr(dev, I2C_READ_BIT, alen ? 1 : 0) != 0)
-		i = __i2c_read(data, length);
+	    i2c_write_addr(adap, dev, I2C_READ_BIT, alen ? 1 : 0) != 0)
+		i = __i2c_read(adap, data, length);
 
-	writeb(I2C_CR_MEN, &i2c_dev[i2c_bus_num]->cr);
+	writeb(I2C_CR_MEN, &device->cr);
 
-	if (i2c_wait4bus()) /* Wait until STOP */
+	if (i2c_wait4bus(adap)) /* Wait until STOP */
 		debug("i2c_read: wait4bus timed out\n");
 
 	if (i == length)
@@ -406,20 +386,22 @@ i2c_read(u8 dev, uint addr, int alen, u8 *data, int length)
 	return -1;
 }
 
-int
-i2c_write(u8 dev, uint addr, int alen, u8 *data, int length)
+static int
+fsl_i2c_write(struct i2c_adapter *adap, u8 dev, uint addr, int alen,
+	      u8 *data, int length)
 {
+	struct fsl_i2c *device = (struct fsl_i2c *)i2c_dev[adap->hwadapnr];
 	int i = -1; /* signal error */
 	u8 *a = (u8*)&addr;
 
-	if (i2c_wait4bus() >= 0
-	    && i2c_write_addr(dev, I2C_WRITE_BIT, 0) != 0
-	    && __i2c_write(&a[4 - alen], alen) == alen) {
-		i = __i2c_write(data, length);
+	if (i2c_wait4bus(adap) >= 0 &&
+	    i2c_write_addr(adap, dev, I2C_WRITE_BIT, 0) != 0 &&
+	    __i2c_write(adap, &a[4 - alen], alen) == alen) {
+		i = __i2c_write(adap, data, length);
 	}
 
-	writeb(I2C_CR_MEN, &i2c_dev[i2c_bus_num]->cr);
-	if (i2c_wait4bus()) /* Wait until STOP */
+	writeb(I2C_CR_MEN, &device->cr);
+	if (i2c_wait4bus(adap)) /* Wait until STOP */
 		debug("i2c_write: wait4bus timed out\n");
 
 	if (i == length)
@@ -428,72 +410,42 @@ i2c_write(u8 dev, uint addr, int alen, u8 *data, int length)
 	return -1;
 }
 
-int
-i2c_probe(uchar chip)
+static int
+fsl_i2c_probe(struct i2c_adapter *adap, uchar chip)
 {
+	struct fsl_i2c *dev = (struct fsl_i2c *)i2c_dev[adap->hwadapnr];
 	/* For unknow reason the controller will ACK when
 	 * probing for a slave with the same address, so skip
 	 * it.
 	 */
-	if (chip == (readb(&i2c_dev[i2c_bus_num]->adr) >> 1))
-		return -1;
-
-	return i2c_read(chip, 0, 0, NULL, 0);
-}
-
-int i2c_set_bus_num(unsigned int bus)
-{
-#if defined(CONFIG_I2C_MUX)
-	if (bus < CONFIG_SYS_MAX_I2C_BUS) {
-		i2c_bus_num = bus;
-	} else {
-		int	ret;
-
-		ret = i2x_mux_select_mux(bus);
-		if (ret)
-			return ret;
-		i2c_bus_num = 0;
-	}
-	i2c_bus_num_mux = bus;
-#else
-#ifdef CONFIG_SYS_I2C2_OFFSET
-	if (bus > 1) {
-#else
-	if (bus > 0) {
-#endif
+	if (chip == (readb(&dev->adr) >> 1))
 		return -1;
-	}
 
-	i2c_bus_num = bus;
-#endif
-	return 0;
+	return fsl_i2c_read(adap, chip, 0, 0, NULL, 0);
 }
 
-int i2c_set_bus_speed(unsigned int speed)
+static unsigned int fsl_i2c_set_bus_speed(struct i2c_adapter *adap,
+			unsigned int speed)
 {
-	unsigned int i2c_clk = (i2c_bus_num == 1)
-			? gd->arch.i2c2_clk : gd->arch.i2c1_clk;
+	struct fsl_i2c *dev = (struct fsl_i2c *)i2c_dev[adap->hwadapnr];
 
-	writeb(0, &i2c_dev[i2c_bus_num]->cr);		/* stop controller */
-	i2c_bus_speed[i2c_bus_num] =
-		set_i2c_bus_speed(i2c_dev[i2c_bus_num], i2c_clk, speed);
-	writeb(I2C_CR_MEN, &i2c_dev[i2c_bus_num]->cr);	/* start controller */
+	writeb(0, &dev->cr);		/* stop controller */
+	set_i2c_bus_speed(dev, get_i2c_clock(adap->hwadapnr), speed);
+	writeb(I2C_CR_MEN, &dev->cr);	/* start controller */
 
 	return 0;
 }
 
-unsigned int i2c_get_bus_num(void)
-{
-#if defined(CONFIG_I2C_MUX)
-	return i2c_bus_num_mux;
-#else
-	return i2c_bus_num;
+/*
+ * Register fsl i2c adapters
+ */
+U_BOOT_I2C_ADAP_COMPLETE(fsl_0, fsl_i2c_init, fsl_i2c_probe, fsl_i2c_read,
+			 fsl_i2c_write, fsl_i2c_set_bus_speed,
+			 CONFIG_SYS_FSL_I2C_SPEED, CONFIG_SYS_FSL_I2C_SLAVE,
+			 0)
+#ifdef CONFIG_SYS_FSL_I2C2_OFFSET
+U_BOOT_I2C_ADAP_COMPLETE(fsl_1, fsl_i2c_init, fsl_i2c_probe, fsl_i2c_read,
+			 fsl_i2c_write, fsl_i2c_set_bus_speed,
+			 CONFIG_SYS_FSL_I2C2_SPEED, CONFIG_SYS_FSL_I2C2_SLAVE,
+			 1)
 #endif
-}
-
-unsigned int i2c_get_bus_speed(void)
-{
-	return i2c_bus_speed[i2c_bus_num];
-}
-
-#endif /* CONFIG_HARD_I2C */
diff --git a/drivers/i2c/fti2c010.c b/drivers/i2c/fti2c010.c
new file mode 100644
index 0000000000..24c4bb53fa
--- /dev/null
+++ b/drivers/i2c/fti2c010.c
@@ -0,0 +1,369 @@
+/*
+ * Faraday I2C Controller
+ *
+ * (C) Copyright 2010 Faraday Technology
+ * Dante Su <dantesu@faraday-tech.com>
+ *
+ * This file is released under the terms of GPL v2 and any later version.
+ * See the file COPYING in the root directory of the source tree for details.
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <i2c.h>
+
+#include "fti2c010.h"
+
+#ifndef CONFIG_HARD_I2C
+#error "fti2c010: CONFIG_HARD_I2C is not defined"
+#endif
+
+#ifndef CONFIG_SYS_I2C_SPEED
+#define CONFIG_SYS_I2C_SPEED    50000
+#endif
+
+#ifndef CONFIG_FTI2C010_FREQ
+#define CONFIG_FTI2C010_FREQ    clk_get_rate("I2C")
+#endif
+
+/* command timeout */
+#define CFG_CMD_TIMEOUT         10 /* ms */
+
+/* 7-bit chip address + 1-bit read/write */
+#define I2C_RD(chip)            ((((chip) << 1) & 0xff) | 1)
+#define I2C_WR(chip)            (((chip) << 1) & 0xff)
+
+struct fti2c010_chip {
+	void __iomem *regs;
+	uint bus;
+	uint speed;
+};
+
+static struct fti2c010_chip chip_list[] = {
+	{
+		.bus  = 0,
+		.regs = (void __iomem *)CONFIG_FTI2C010_BASE,
+	},
+#ifdef CONFIG_I2C_MULTI_BUS
+# ifdef CONFIG_FTI2C010_BASE1
+	{
+		.bus  = 1,
+		.regs = (void __iomem *)CONFIG_FTI2C010_BASE1,
+	},
+# endif
+# ifdef CONFIG_FTI2C010_BASE2
+	{
+		.bus  = 2,
+		.regs = (void __iomem *)CONFIG_FTI2C010_BASE2,
+	},
+# endif
+# ifdef CONFIG_FTI2C010_BASE3
+	{
+		.bus  = 3,
+		.regs = (void __iomem *)CONFIG_FTI2C010_BASE3,
+	},
+# endif
+#endif  /* #ifdef CONFIG_I2C_MULTI_BUS */
+};
+
+static struct fti2c010_chip *curr = chip_list;
+
+static int fti2c010_wait(uint32_t mask)
+{
+	int ret = -1;
+	uint32_t stat, ts;
+	struct fti2c010_regs *regs = curr->regs;
+
+	for (ts = get_timer(0); get_timer(ts) < CFG_CMD_TIMEOUT; ) {
+		stat = readl(&regs->sr);
+		if ((stat & mask) == mask) {
+			ret = 0;
+			break;
+		}
+	}
+
+	return ret;
+}
+
+/*
+ * u-boot I2C API
+ */
+
+/*
+ * Initialization, must be called once on start up, may be called
+ * repeatedly to change the speed and slave addresses.
+ */
+void i2c_init(int speed, int slaveaddr)
+{
+	if (speed || !curr->speed)
+		i2c_set_bus_speed(speed);
+
+	/* if slave mode disabled */
+	if (!slaveaddr)
+		return;
+
+	/*
+	 * TODO:
+	 * Implement slave mode, but is it really necessary?
+	 */
+}
+
+/*
+ * Probe the given I2C chip address.  Returns 0 if a chip responded,
+ * not 0 on failure.
+ */
+int i2c_probe(uchar chip)
+{
+	int ret;
+	struct fti2c010_regs *regs = curr->regs;
+
+	i2c_init(0, 0);
+
+	/* 1. Select slave device (7bits Address + 1bit R/W) */
+	writel(I2C_WR(chip), &regs->dr);
+	writel(CR_ENABLE | CR_TBEN | CR_START, &regs->cr);
+	ret = fti2c010_wait(SR_DT);
+	if (ret)
+		return ret;
+
+	/* 2. Select device register */
+	writel(0, &regs->dr);
+	writel(CR_ENABLE | CR_TBEN, &regs->cr);
+	ret = fti2c010_wait(SR_DT);
+
+	return ret;
+}
+
+/*
+ * Read/Write interface:
+ *   chip:    I2C chip address, range 0..127
+ *   addr:    Memory (register) address within the chip
+ *   alen:    Number of bytes to use for addr (typically 1, 2 for larger
+ *              memories, 0 for register type devices with only one
+ *              register)
+ *   buffer:  Where to read/write the data
+ *   len:     How many bytes to read/write
+ *
+ *   Returns: 0 on success, not 0 on failure
+ */
+int i2c_read(uchar chip, uint addr, int alen, uchar *buf, int len)
+{
+	int ret, pos;
+	uchar paddr[4];
+	struct fti2c010_regs *regs = curr->regs;
+
+	i2c_init(0, 0);
+
+	paddr[0] = (addr >> 0)  & 0xFF;
+	paddr[1] = (addr >> 8)  & 0xFF;
+	paddr[2] = (addr >> 16) & 0xFF;
+	paddr[3] = (addr >> 24) & 0xFF;
+
+	/*
+	 * Phase A. Set register address
+	 */
+
+	/* A.1 Select slave device (7bits Address + 1bit R/W) */
+	writel(I2C_WR(chip), &regs->dr);
+	writel(CR_ENABLE | CR_TBEN | CR_START, &regs->cr);
+	ret = fti2c010_wait(SR_DT);
+	if (ret)
+		return ret;
+
+	/* A.2 Select device register */
+	for (pos = 0; pos < alen; ++pos) {
+		uint32_t ctrl = CR_ENABLE | CR_TBEN;
+
+		writel(paddr[pos], &regs->dr);
+		writel(ctrl, &regs->cr);
+		ret = fti2c010_wait(SR_DT);
+		if (ret)
+			return ret;
+	}
+
+	/*
+	 * Phase B. Get register data
+	 */
+
+	/* B.1 Select slave device (7bits Address + 1bit R/W) */
+	writel(I2C_RD(chip), &regs->dr);
+	writel(CR_ENABLE | CR_TBEN | CR_START, &regs->cr);
+	ret = fti2c010_wait(SR_DT);
+	if (ret)
+		return ret;
+
+	/* B.2 Get register data */
+	for (pos = 0; pos < len; ++pos) {
+		uint32_t ctrl = CR_ENABLE | CR_TBEN;
+		uint32_t stat = SR_DR;
+
+		if (pos == len - 1) {
+			ctrl |= CR_NAK | CR_STOP;
+			stat |= SR_ACK;
+		}
+		writel(ctrl, &regs->cr);
+		ret = fti2c010_wait(stat);
+		if (ret)
+			break;
+		buf[pos] = (uchar)(readl(&regs->dr) & 0xFF);
+	}
+
+	return ret;
+}
+
+/*
+ * Read/Write interface:
+ *   chip:    I2C chip address, range 0..127
+ *   addr:    Memory (register) address within the chip
+ *   alen:    Number of bytes to use for addr (typically 1, 2 for larger
+ *              memories, 0 for register type devices with only one
+ *              register)
+ *   buffer:  Where to read/write the data
+ *   len:     How many bytes to read/write
+ *
+ *   Returns: 0 on success, not 0 on failure
+ */
+int i2c_write(uchar chip, uint addr, int alen, uchar *buf, int len)
+{
+	int ret, pos;
+	uchar paddr[4];
+	struct fti2c010_regs *regs = curr->regs;
+
+	i2c_init(0, 0);
+
+	paddr[0] = (addr >> 0)  & 0xFF;
+	paddr[1] = (addr >> 8)  & 0xFF;
+	paddr[2] = (addr >> 16) & 0xFF;
+	paddr[3] = (addr >> 24) & 0xFF;
+
+	/*
+	 * Phase A. Set register address
+	 *
+	 * A.1 Select slave device (7bits Address + 1bit R/W)
+	 */
+	writel(I2C_WR(chip), &regs->dr);
+	writel(CR_ENABLE | CR_TBEN | CR_START, &regs->cr);
+	ret = fti2c010_wait(SR_DT);
+	if (ret)
+		return ret;
+
+	/* A.2 Select device register */
+	for (pos = 0; pos < alen; ++pos) {
+		uint32_t ctrl = CR_ENABLE | CR_TBEN;
+
+		writel(paddr[pos], &regs->dr);
+		writel(ctrl, &regs->cr);
+		ret = fti2c010_wait(SR_DT);
+		if (ret)
+			return ret;
+	}
+
+	/*
+	 * Phase B. Set register data
+	 */
+	for (pos = 0; pos < len; ++pos) {
+		uint32_t ctrl = CR_ENABLE | CR_TBEN;
+
+		if (pos == len - 1)
+			ctrl |= CR_STOP;
+		writel(buf[pos], &regs->dr);
+		writel(ctrl, &regs->cr);
+		ret = fti2c010_wait(SR_DT);
+		if (ret)
+			break;
+	}
+
+	return ret;
+}
+
+/*
+ * Functions for setting the current I2C bus and its speed
+ */
+#ifdef CONFIG_I2C_MULTI_BUS
+
+/*
+ * i2c_set_bus_num:
+ *
+ *  Change the active I2C bus.  Subsequent read/write calls will
+ *  go to this one.
+ *
+ *    bus - bus index, zero based
+ *
+ *    Returns: 0 on success, not 0 on failure
+ */
+int i2c_set_bus_num(uint bus)
+{
+	if (bus >= ARRAY_SIZE(chip_list))
+		return -1;
+	curr = chip_list + bus;
+	i2c_init(0, 0);
+	return 0;
+}
+
+/*
+ * i2c_get_bus_num:
+ *
+ *  Returns index of currently active I2C bus.  Zero-based.
+ */
+
+uint i2c_get_bus_num(void)
+{
+	return curr->bus;
+}
+
+#endif    /* #ifdef CONFIG_I2C_MULTI_BUS */
+
+/*
+ * i2c_set_bus_speed:
+ *
+ *  Change the speed of the active I2C bus
+ *
+ *    speed - bus speed in Hz
+ *
+ *    Returns: 0 on success, not 0 on failure
+ */
+int i2c_set_bus_speed(uint speed)
+{
+	struct fti2c010_regs *regs = curr->regs;
+	uint clk = CONFIG_FTI2C010_FREQ;
+	uint gsr = 0, tsr = 32;
+	uint spd, div;
+
+	if (!speed)
+		speed = CONFIG_SYS_I2C_SPEED;
+
+	for (div = 0; div < 0x3ffff; ++div) {
+		/* SCLout = PCLK/(2*(COUNT + 2) + GSR) */
+		spd = clk / (2 * (div + 2) + gsr);
+		if (spd <= speed)
+			break;
+	}
+
+	if (curr->speed == spd)
+		return 0;
+
+	writel(CR_I2CRST, &regs->cr);
+	mdelay(100);
+	if (readl(&regs->cr) & CR_I2CRST) {
+		printf("fti2c010: reset timeout\n");
+		return -1;
+	}
+
+	curr->speed = spd;
+
+	writel(TGSR_GSR(gsr) | TGSR_TSR(tsr), &regs->tgsr);
+	writel(CDR_DIV(div), &regs->cdr);
+
+	return 0;
+}
+
+/*
+ * i2c_get_bus_speed:
+ *
+ *  Returns speed of currently active I2C bus in Hz
+ */
+
+uint i2c_get_bus_speed(void)
+{
+	return curr->speed;
+}
diff --git a/drivers/i2c/fti2c010.h b/drivers/i2c/fti2c010.h
new file mode 100644
index 0000000000..18aec2c976
--- /dev/null
+++ b/drivers/i2c/fti2c010.h
@@ -0,0 +1,81 @@
+/*
+ * Faraday I2C Controller
+ *
+ * (C) Copyright 2010 Faraday Technology
+ * Dante Su <dantesu@faraday-tech.com>
+ *
+ * This file is released under the terms of GPL v2 and any later version.
+ * See the file COPYING in the root directory of the source tree for details.
+ */
+
+#ifndef __FTI2C010_H
+#define __FTI2C010_H
+
+/*
+ * FTI2C010 registers
+ */
+struct fti2c010_regs {
+	uint32_t cr;  /* 0x00: control register */
+	uint32_t sr;  /* 0x04: status register */
+	uint32_t cdr; /* 0x08: clock division register */
+	uint32_t dr;  /* 0x0c: data register */
+	uint32_t sar; /* 0x10: slave address register */
+	uint32_t tgsr;/* 0x14: time & glitch suppression register */
+	uint32_t bmr; /* 0x18: bus monitor register */
+	uint32_t rsvd[5];
+	uint32_t revr;/* 0x30: revision register */
+};
+
+/*
+ * control register
+ */
+#define CR_ALIRQ      0x2000  /* arbitration lost interrupt (master) */
+#define CR_SAMIRQ     0x1000  /* slave address match interrupt (slave) */
+#define CR_STOPIRQ    0x800   /* stop condition interrupt (slave) */
+#define CR_NAKRIRQ    0x400   /* NACK response interrupt (master) */
+#define CR_DRIRQ      0x200   /* rx interrupt (both) */
+#define CR_DTIRQ      0x100   /* tx interrupt (both) */
+#define CR_TBEN       0x80    /* tx enable (both) */
+#define CR_NAK        0x40    /* NACK (both) */
+#define CR_STOP       0x20    /* stop (master) */
+#define CR_START      0x10    /* start (master) */
+#define CR_GCEN       0x8     /* general call support (slave) */
+#define CR_SCLEN      0x4     /* enable clock out (master) */
+#define CR_I2CEN      0x2     /* enable I2C (both) */
+#define CR_I2CRST     0x1     /* reset I2C (both) */
+#define CR_ENABLE     \
+	(CR_ALIRQ | CR_NAKRIRQ | CR_DRIRQ | CR_DTIRQ | CR_SCLEN | CR_I2CEN)
+
+/*
+ * status register
+ */
+#define SR_CLRAL      0x400    /* clear arbitration lost */
+#define SR_CLRGC      0x200    /* clear general call */
+#define SR_CLRSAM     0x100    /* clear slave address match */
+#define SR_CLRSTOP    0x80     /* clear stop */
+#define SR_CLRNAKR    0x40     /* clear NACK respond */
+#define SR_DR         0x20     /* rx ready */
+#define SR_DT         0x10     /* tx done */
+#define SR_BB         0x8      /* bus busy */
+#define SR_BUSY       0x4      /* chip busy */
+#define SR_ACK        0x2      /* ACK/NACK received */
+#define SR_RW         0x1      /* set when master-rx or slave-tx mode */
+
+/*
+ * clock division register
+ */
+#define CDR_DIV(n)    ((n) & 0x3ffff)
+
+/*
+ * time & glitch suppression register
+ */
+#define TGSR_GSR(n)   (((n) & 0x7) << 10)
+#define TGSR_TSR(n)   ((n) & 0x3ff)
+
+/*
+ * bus monitor register
+ */
+#define BMR_SCL       0x2      /* SCL is pull-up */
+#define BMR_SDA       0x1      /* SDA is pull-up */
+
+#endif /* __FTI2C010_H */
diff --git a/drivers/i2c/i2c_core.c b/drivers/i2c/i2c_core.c
new file mode 100644
index 0000000000..3c01893c9c
--- /dev/null
+++ b/drivers/i2c/i2c_core.c
@@ -0,0 +1,414 @@
+/*
+ * Copyright (C) 2009 Sergey Kubushyn <ksi@koi8.net>
+ *
+ * (C) Copyright 2012
+ * Heiko Schocher, DENX Software Engineering, hs@denx.de.
+ *
+ * Multibus/multiadapter I2C core functions (wrappers)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <common.h>
+#include <i2c.h>
+
+struct i2c_adapter *i2c_get_adapter(int index)
+{
+	struct i2c_adapter *i2c_adap_p = ll_entry_start(struct i2c_adapter,
+						i2c);
+	int max = ll_entry_count(struct i2c_adapter, i2c);
+	int i;
+
+	if (index >= max) {
+		printf("Error, wrong i2c adapter %d max %d possible\n",
+		       index, max);
+		return i2c_adap_p;
+	}
+	if (index == 0)
+		return i2c_adap_p;
+
+	for (i = 0; i < index; i++)
+		i2c_adap_p++;
+
+	return i2c_adap_p;
+}
+
+#if !defined(CONFIG_SYS_I2C_DIRECT_BUS)
+struct i2c_bus_hose i2c_bus[CONFIG_SYS_NUM_I2C_BUSES] =
+			CONFIG_SYS_I2C_BUSES;
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void i2c_reloc_fixup(void)
+{
+#if defined(CONFIG_NEEDS_MANUAL_RELOC)
+	struct i2c_adapter *i2c_adap_p = ll_entry_start(struct i2c_adapter,
+						i2c);
+	struct i2c_adapter *tmp = i2c_adap_p;
+	int max = ll_entry_count(struct i2c_adapter, i2c);
+	int		i;
+	unsigned long	addr;
+
+	if (gd->reloc_off == 0)
+		return;
+
+	for (i = 0; i < max; i++) {
+		/* adapter itself */
+		addr = (unsigned long)i2c_adap_p;
+		addr += gd->reloc_off;
+		i2c_adap_p = (struct i2c_adapter *)addr;
+		/* i2c_init() */
+		addr = (unsigned long)i2c_adap_p->init;
+		addr += gd->reloc_off;
+		i2c_adap_p->init = (void (*)(int, int))addr;
+		/* i2c_probe() */
+		addr = (unsigned long)i2c_adap_p->probe;
+		addr += gd->reloc_off;
+		i2c_adap_p->probe = (int (*)(uint8_t))addr;
+		/* i2c_read() */
+		addr = (unsigned long)i2c_adap_p->read;
+		addr += gd->reloc_off;
+		i2c_adap_p->read = (int (*)(uint8_t, uint, int, uint8_t *,
+					int))addr;
+		/* i2c_write() */
+		addr = (unsigned long)i2c_adap_p->write;
+		addr += gd->reloc_off;
+		i2c_adap_p->write = (int (*)(uint8_t, uint, int, uint8_t *,
+					int))addr;
+		/* i2c_set_bus_speed() */
+		addr = (unsigned long)i2c_adap_p->set_bus_speed;
+		addr += gd->reloc_off;
+		i2c_adap_p->set_bus_speed = (uint (*)(uint))addr;
+		/* name */
+		addr = (unsigned long)i2c_adap_p->name;
+		addr += gd->reloc_off;
+		i2c_adap_p->name = (char *)addr;
+		tmp++;
+		i2c_adap_p = tmp;
+	}
+#endif
+}
+
+#ifndef CONFIG_SYS_I2C_DIRECT_BUS
+/*
+ * i2c_mux_set()
+ * -------------
+ *
+ * This turns on the given channel on I2C multiplexer chip connected to
+ * a given I2C adapter directly or via other multiplexers. In the latter
+ * case the entire multiplexer chain must be initialized first starting
+ * with the one connected directly to the adapter. When disabling a chain
+ * muxes must be programmed in reverse order, starting with the one
+ * farthest from the adapter.
+ *
+ * mux_id is the multiplexer chip type from defined in i2c.h. So far only
+ * NXP (Philips) PCA954x multiplexers are supported. Switches are NOT
+ * supported (anybody uses them?)
+ */
+
+static int i2c_mux_set(struct i2c_adapter *adap, int mux_id, int chip,
+			int channel)
+{
+	uint8_t	buf;
+	int ret;
+
+	/* channel < 0 - turn off the mux */
+	if (channel < 0) {
+		buf = 0;
+		ret = adap->write(adap, chip, 0, 0, &buf, 1);
+		if (ret)
+			printf("%s: Could not turn off the mux.\n", __func__);
+		return ret;
+	}
+
+	switch (mux_id) {
+	case I2C_MUX_PCA9540_ID:
+	case I2C_MUX_PCA9542_ID:
+		if (channel > 1)
+			return -1;
+		buf = (uint8_t)((channel & 0x01) | (1 << 2));
+		break;
+	case I2C_MUX_PCA9544_ID:
+		if (channel > 3)
+			return -1;
+		buf = (uint8_t)((channel & 0x03) | (1 << 2));
+		break;
+	case I2C_MUX_PCA9547_ID:
+		if (channel > 7)
+			return -1;
+		buf = (uint8_t)((channel & 0x07) | (1 << 3));
+		break;
+	default:
+		printf("%s: wrong mux id: %d\n", __func__, mux_id);
+		return -1;
+	}
+
+	ret = adap->write(adap, chip, 0, 0, &buf, 1);
+	if (ret)
+		printf("%s: could not set mux: id: %d chip: %x channel: %d\n",
+		       __func__, mux_id, chip, channel);
+	return ret;
+}
+
+static int i2c_mux_set_all(void)
+{
+	struct i2c_bus_hose *i2c_bus_tmp = &i2c_bus[I2C_BUS];
+	int i;
+
+	/* Connect requested bus if behind muxes */
+	if (i2c_bus_tmp->next_hop[0].chip != 0) {
+		/* Set all muxes along the path to that bus */
+		for (i = 0; i < CONFIG_SYS_I2C_MAX_HOPS; i++) {
+			int	ret;
+
+			if (i2c_bus_tmp->next_hop[i].chip == 0)
+				break;
+
+			ret = i2c_mux_set(I2C_ADAP,
+					i2c_bus_tmp->next_hop[i].mux.id,
+					i2c_bus_tmp->next_hop[i].chip,
+					i2c_bus_tmp->next_hop[i].channel);
+			if (ret != 0)
+				return ret;
+		}
+	}
+	return 0;
+}
+
+static int i2c_mux_disconnet_all(void)
+{
+	struct	i2c_bus_hose *i2c_bus_tmp = &i2c_bus[I2C_BUS];
+	int	i;
+	uint8_t	buf;
+
+	if (I2C_ADAP->init_done == 0)
+		return 0;
+
+	/* Disconnect current bus (turn off muxes if any) */
+	if ((i2c_bus_tmp->next_hop[0].chip != 0) &&
+	    (I2C_ADAP->init_done != 0)) {
+		i = CONFIG_SYS_I2C_MAX_HOPS;
+		do {
+			uint8_t	chip;
+			int ret;
+
+			chip = i2c_bus_tmp->next_hop[--i].chip;
+			if (chip == 0)
+				continue;
+
+			ret = I2C_ADAP->write(I2C_ADAP, chip, 0, 0, &buf, 1);
+			if (ret != 0) {
+				printf("i2c: mux diconnect error\n");
+				return ret;
+			}
+		} while (i > 0);
+	}
+
+	return 0;
+}
+#endif
+
+/*
+ * i2c_init_bus():
+ * ---------------
+ *
+ * Initializes one bus. Will initialize the parent adapter. No current bus
+ * changes, no mux (if any) setup.
+ */
+static void i2c_init_bus(unsigned int bus_no, int speed, int slaveaddr)
+{
+	if (bus_no >= CONFIG_SYS_NUM_I2C_BUSES)
+		return;
+
+	I2C_ADAP->init(I2C_ADAP, speed, slaveaddr);
+
+	if (gd->flags & GD_FLG_RELOC) {
+		I2C_ADAP->init_done = 1;
+		I2C_ADAP->speed = speed;
+		I2C_ADAP->slaveaddr = slaveaddr;
+	}
+}
+
+/* implement possible board specific board init */
+static void __def_i2c_init_board(void)
+{
+}
+void i2c_init_board(void)
+	__attribute__((weak, alias("__def_i2c_init_board")));
+
+/*
+ * i2c_init_all():
+ *
+ * not longer needed, will deleted. Actual init the SPD_BUS
+ * for compatibility.
+ * i2c_adap[] must be initialized beforehead with function pointers and
+ * data, including speed and slaveaddr.
+ */
+void i2c_init_all(void)
+{
+	i2c_init_board();
+	i2c_set_bus_num(CONFIG_SYS_SPD_BUS_NUM);
+	return;
+}
+
+/*
+ * i2c_get_bus_num():
+ * ------------------
+ *
+ *  Returns index of currently active I2C bus.  Zero-based.
+ */
+unsigned int i2c_get_bus_num(void)
+{
+	return gd->cur_i2c_bus;
+}
+
+/*
+ * i2c_set_bus_num():
+ * ------------------
+ *
+ *  Change the active I2C bus. Subsequent read/write calls will
+ *  go to this one. Sets all of the muxes in a proper condition
+ *  if that bus is behind muxes.
+ *  If previously selected bus is behind the muxes turns off all the
+ *  muxes along the path to that bus.
+ *
+ *	bus - bus index, zero based
+ *
+ *	Returns: 0 on success, not 0 on failure
+ */
+int i2c_set_bus_num(unsigned int bus)
+{
+	int max = ll_entry_count(struct i2c_adapter, i2c);
+
+	if (I2C_ADAPTER(bus) >= max) {
+		printf("Error, wrong i2c adapter %d max %d possible\n",
+		       I2C_ADAPTER(bus), max);
+		return -2;
+	}
+#ifndef CONFIG_SYS_I2C_DIRECT_BUS
+	if (bus >= CONFIG_SYS_NUM_I2C_BUSES)
+		return -1;
+#endif
+
+	if ((bus == I2C_BUS) && (I2C_ADAP->init_done > 0))
+		return 0;
+
+#ifndef CONFIG_SYS_I2C_DIRECT_BUS
+	i2c_mux_disconnet_all();
+#endif
+
+	gd->cur_i2c_bus = bus;
+	if (I2C_ADAP->init_done == 0)
+		i2c_init_bus(bus, I2C_ADAP->speed, I2C_ADAP->slaveaddr);
+
+#ifndef CONFIG_SYS_I2C_DIRECT_BUS
+	i2c_mux_set_all();
+#endif
+	return 0;
+}
+
+/*
+ * Probe the given I2C chip address.  Returns 0 if a chip responded,
+ * not 0 on failure.
+ */
+int i2c_probe(uint8_t chip)
+{
+	return I2C_ADAP->probe(I2C_ADAP, chip);
+}
+
+/*
+ * Read/Write interface:
+ *   chip:    I2C chip address, range 0..127
+ *   addr:    Memory (register) address within the chip
+ *   alen:    Number of bytes to use for addr (typically 1, 2 for larger
+ *              memories, 0 for register type devices with only one
+ *              register)
+ *   buffer:  Where to read/write the data
+ *   len:     How many bytes to read/write
+ *
+ *   Returns: 0 on success, not 0 on failure
+ */
+int i2c_read(uint8_t chip, unsigned int addr, int alen,
+				uint8_t *buffer, int len)
+{
+	return I2C_ADAP->read(I2C_ADAP, chip, addr, alen, buffer, len);
+}
+
+int i2c_write(uint8_t chip, unsigned int addr, int alen,
+				uint8_t *buffer, int len)
+{
+	return I2C_ADAP->write(I2C_ADAP, chip, addr, alen, buffer, len);
+}
+
+unsigned int i2c_set_bus_speed(unsigned int speed)
+{
+	unsigned int ret;
+
+	if (I2C_ADAP->set_bus_speed == NULL)
+		return 0;
+	ret = I2C_ADAP->set_bus_speed(I2C_ADAP, speed);
+	if (gd->flags & GD_FLG_RELOC)
+		I2C_ADAP->speed = ret;
+
+	return ret;
+}
+
+unsigned int i2c_get_bus_speed(void)
+{
+	struct i2c_adapter *cur = I2C_ADAP;
+	return cur->speed;
+}
+
+uint8_t i2c_reg_read(uint8_t addr, uint8_t reg)
+{
+	uint8_t buf;
+
+#ifdef CONFIG_8xx
+	/* MPC8xx needs this.  Maybe one day we can get rid of it. */
+	/* maybe it is now the time for it ... */
+	i2c_set_bus_num(i2c_get_bus_num());
+#endif
+	i2c_read(addr, reg, 1, &buf, 1);
+
+#ifdef DEBUG
+	printf("%s: bus=%d addr=0x%02x, reg=0x%02x, val=0x%02x\n",
+	       __func__, i2c_get_bus_num(), addr, reg, buf);
+#endif
+
+	return buf;
+}
+
+void i2c_reg_write(uint8_t addr, uint8_t reg, uint8_t val)
+{
+#ifdef CONFIG_8xx
+	/* MPC8xx needs this.  Maybe one day we can get rid of it. */
+	/* maybe it is now the time for it ... */
+	i2c_set_bus_num(i2c_get_bus_num());
+#endif
+
+#ifdef DEBUG
+	printf("%s: bus=%d addr=0x%02x, reg=0x%02x, val=0x%02x\n",
+	       __func__, i2c_get_bus_num(), addr, reg, val);
+#endif
+
+	i2c_write(addr, reg, 1, &val, 1);
+}
+
+void __i2c_init(int speed, int slaveaddr)
+{
+	i2c_init_bus(i2c_get_bus_num(), speed, slaveaddr);
+}
+void i2c_init(int speed, int slaveaddr)
+	__attribute__((weak, alias("__i2c_init")));
diff --git a/drivers/i2c/mxc_i2c.c b/drivers/i2c/mxc_i2c.c
index 3eadbac0cd..06ba4e39f1 100644
--- a/drivers/i2c/mxc_i2c.c
+++ b/drivers/i2c/mxc_i2c.c
@@ -22,6 +22,15 @@
 #include <i2c.h>
 #include <watchdog.h>
 
+#ifdef I2C_QUIRK_REG
+struct mxc_i2c_regs {
+	uint8_t		iadr;
+	uint8_t		ifdr;
+	uint8_t		i2cr;
+	uint8_t		i2sr;
+	uint8_t		i2dr;
+};
+#else
 struct mxc_i2c_regs {
 	uint32_t	iadr;
 	uint32_t	ifdr;
@@ -29,8 +38,8 @@ struct mxc_i2c_regs {
 	uint32_t	i2sr;
 	uint32_t	i2dr;
 };
+#endif
 
-#define I2CR_IEN	(1 << 7)
 #define I2CR_IIEN	(1 << 6)
 #define I2CR_MSTA	(1 << 5)
 #define I2CR_MTX	(1 << 4)
@@ -43,10 +52,39 @@ struct mxc_i2c_regs {
 #define I2SR_IIF	(1 << 1)
 #define I2SR_RX_NO_AK	(1 << 0)
 
+#ifdef I2C_QUIRK_REG
+#define I2CR_IEN	(0 << 7)
+#define I2CR_IDIS	(1 << 7)
+#define I2SR_IIF_CLEAR	(1 << 1)
+#else
+#define I2CR_IEN	(1 << 7)
+#define I2CR_IDIS	(0 << 7)
+#define I2SR_IIF_CLEAR	(0 << 1)
+#endif
+
 #if defined(CONFIG_HARD_I2C) && !defined(CONFIG_SYS_I2C_BASE)
 #error "define CONFIG_SYS_I2C_BASE to use the mxc_i2c driver"
 #endif
 
+#ifdef I2C_QUIRK_REG
+static u16 i2c_clk_div[60][2] = {
+	{ 20,	0x00 }, { 22,	0x01 }, { 24,	0x02 }, { 26,	0x03 },
+	{ 28,	0x04 },	{ 30,	0x05 },	{ 32,	0x09 }, { 34,	0x06 },
+	{ 36,	0x0A }, { 40,	0x07 }, { 44,	0x0C }, { 48,	0x0D },
+	{ 52,	0x43 },	{ 56,	0x0E }, { 60,	0x45 }, { 64,	0x12 },
+	{ 68,	0x0F },	{ 72,	0x13 },	{ 80,	0x14 },	{ 88,	0x15 },
+	{ 96,	0x19 },	{ 104,	0x16 },	{ 112,	0x1A },	{ 128,	0x17 },
+	{ 136,	0x4F }, { 144,	0x1C },	{ 160,	0x1D }, { 176,	0x55 },
+	{ 192,	0x1E }, { 208,	0x56 },	{ 224,	0x22 }, { 228,	0x24 },
+	{ 240,	0x1F },	{ 256,	0x23 }, { 288,	0x5C },	{ 320,	0x25 },
+	{ 384,	0x26 }, { 448,	0x2A },	{ 480,	0x27 }, { 512,	0x2B },
+	{ 576,	0x2C },	{ 640,	0x2D },	{ 768,	0x31 }, { 896,	0x32 },
+	{ 960,	0x2F },	{ 1024,	0x33 },	{ 1152,	0x34 }, { 1280,	0x35 },
+	{ 1536,	0x36 }, { 1792,	0x3A },	{ 1920,	0x37 },	{ 2048,	0x3B },
+	{ 2304,	0x3C },	{ 2560,	0x3D },	{ 3072,	0x3E }, { 3584,	0x7A },
+	{ 3840,	0x3F }, { 4096,	0x7B }, { 5120,	0x7D },	{ 6144,	0x7E },
+};
+#else
 static u16 i2c_clk_div[50][2] = {
 	{ 22,	0x20 }, { 24,	0x21 }, { 26,	0x22 }, { 28,	0x23 },
 	{ 30,	0x00 }, { 32,	0x24 }, { 36,	0x25 }, { 40,	0x26 },
@@ -62,6 +100,7 @@ static u16 i2c_clk_div[50][2] = {
 	{ 1920,	0x1B }, { 2048,	0x3F }, { 2304,	0x1C }, { 2560,	0x1D },
 	{ 3072,	0x1E }, { 3840,	0x1F }
 };
+#endif
 
 /*
  * Calculate and set proper clock divider
@@ -109,7 +148,7 @@ static int bus_i2c_set_bus_speed(void *base, int speed)
 	writeb(idx, &i2c_regs->ifdr);
 
 	/* Reset module */
-	writeb(0, &i2c_regs->i2cr);
+	writeb(I2CR_IDIS, &i2c_regs->i2cr);
 	writeb(0, &i2c_regs->i2sr);
 	return 0;
 }
@@ -141,7 +180,11 @@ static int wait_for_sr_state(struct mxc_i2c_regs *i2c_regs, unsigned state)
 	for (;;) {
 		sr = readb(&i2c_regs->i2sr);
 		if (sr & I2SR_IAL) {
+#ifdef I2C_QUIRK_REG
+			writeb(sr | I2SR_IAL, &i2c_regs->i2sr);
+#else
 			writeb(sr & ~I2SR_IAL, &i2c_regs->i2sr);
+#endif
 			printf("%s: Arbitration lost sr=%x cr=%x state=%x\n",
 				__func__, sr, readb(&i2c_regs->i2cr), state);
 			return -ERESTART;
@@ -162,7 +205,7 @@ static int tx_byte(struct mxc_i2c_regs *i2c_regs, u8 byte)
 {
 	int ret;
 
-	writeb(0, &i2c_regs->i2sr);
+	writeb(I2SR_IIF_CLEAR, &i2c_regs->i2sr);
 	writeb(byte, &i2c_regs->i2dr);
 	ret = wait_for_sr_state(i2c_regs, ST_IIF);
 	if (ret < 0)
@@ -198,14 +241,18 @@ static int i2c_init_transfer_(struct mxc_i2c_regs *i2c_regs,
 	int ret;
 
 	/* Enable I2C controller */
+#ifdef I2C_QUIRK_REG
+	if (readb(&i2c_regs->i2cr) & I2CR_IDIS) {
+#else
 	if (!(readb(&i2c_regs->i2cr) & I2CR_IEN)) {
+#endif
 		writeb(I2CR_IEN, &i2c_regs->i2cr);
 		/* Wait for controller to be stable */
 		udelay(50);
 	}
 	if (readb(&i2c_regs->iadr) == (chip << 1))
 		writeb((chip << 1) ^ 2, &i2c_regs->iadr);
-	writeb(0, &i2c_regs->i2sr);
+	writeb(I2SR_IIF_CLEAR, &i2c_regs->i2sr);
 	ret = wait_for_sr_state(i2c_regs, ST_BUS_IDLE);
 	if (ret < 0)
 		return ret;
@@ -253,7 +300,8 @@ static int i2c_init_transfer(struct mxc_i2c_regs *i2c_regs,
 		printf("%s: failed for chip 0x%x retry=%d\n", __func__, chip,
 				retry);
 		if (ret != -ERESTART)
-			writeb(0, &i2c_regs->i2cr);	/* Disable controller */
+			/* Disable controller */
+			writeb(I2CR_IDIS, &i2c_regs->i2cr);
 		udelay(100);
 		if (i2c_idle_bus(i2c_regs) < 0)
 			break;
@@ -293,7 +341,7 @@ int bus_i2c_read(void *base, uchar chip, uint addr, int alen, uchar *buf,
 	if (len == 1)
 		temp |= I2CR_TX_NO_AK;
 	writeb(temp, &i2c_regs->i2cr);
-	writeb(0, &i2c_regs->i2sr);
+	writeb(I2SR_IIF_CLEAR, &i2c_regs->i2sr);
 	readb(&i2c_regs->i2dr);		/* dummy read to clear ICF */
 
 	/* read data */
@@ -315,7 +363,7 @@ int bus_i2c_read(void *base, uchar chip, uint addr, int alen, uchar *buf,
 			temp |= I2CR_TX_NO_AK;
 			writeb(temp, &i2c_regs->i2cr);
 		}
-		writeb(0, &i2c_regs->i2sr);
+		writeb(I2SR_IIF_CLEAR, &i2c_regs->i2sr);
 		buf[i] = readb(&i2c_regs->i2dr);
 	}
 	i2c_imx_stop(i2c_regs);
diff --git a/drivers/i2c/ppc4xx_i2c.c b/drivers/i2c/ppc4xx_i2c.c
index 52929ebc4e..e7a15ba644 100644
--- a/drivers/i2c/ppc4xx_i2c.c
+++ b/drivers/i2c/ppc4xx_i2c.c
@@ -16,27 +16,29 @@
 #include <i2c.h>
 #include <asm/io.h>
 
-#ifdef CONFIG_HARD_I2C
-
 DECLARE_GLOBAL_DATA_PTR;
 
-#if defined(CONFIG_I2C_MULTI_BUS)
-/*
- * Initialize the bus pointer to whatever one the SPD EEPROM is on.
- * Default is bus 0.  This is necessary because the DDR initialization
- * runs from ROM, and we can't switch buses because we can't modify
- * the global variables.
- */
-#ifndef CONFIG_SYS_SPD_BUS_NUM
-#define CONFIG_SYS_SPD_BUS_NUM	0
+static inline struct ppc4xx_i2c *ppc4xx_get_i2c(int hwadapnr)
+{
+	unsigned long base;
+
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+	defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+	defined(CONFIG_460EX) || defined(CONFIG_460GT)
+	base = CONFIG_SYS_PERIPHERAL_BASE + 0x00000700 + (hwadapnr * 0x100);
+#elif defined(CONFIG_440) || defined(CONFIG_405EX)
+/* all remaining 440 variants */
+	base = CONFIG_SYS_PERIPHERAL_BASE + 0x00000400 + (hwadapnr * 0x100);
+#else
+/* all 405 variants */
+	base = 0xEF600500 + (hwadapnr * 0x100);
 #endif
-static unsigned int i2c_bus_num __attribute__ ((section (".data"))) =
-	CONFIG_SYS_SPD_BUS_NUM;
-#endif /* CONFIG_I2C_MULTI_BUS */
+	return (struct ppc4xx_i2c *)base;
+}
 
-static void _i2c_bus_reset(void)
+static void _i2c_bus_reset(struct i2c_adapter *adap)
 {
-	struct ppc4xx_i2c *i2c = (struct ppc4xx_i2c *)I2C_BASE_ADDR;
+	struct ppc4xx_i2c *i2c = ppc4xx_get_i2c(adap->hwadapnr);
 	int i;
 	u8 dc;
 
@@ -75,11 +77,10 @@ static void _i2c_bus_reset(void)
 	out_8(&i2c->xtcntlss, 0);
 }
 
-void i2c_init(int speed, int slaveaddr)
+static void ppc4xx_i2c_init(struct i2c_adapter *adap, int speed, int slaveaddr)
 {
-	struct ppc4xx_i2c *i2c;
+	struct ppc4xx_i2c *i2c = ppc4xx_get_i2c(adap->hwadapnr);
 	int val, divisor;
-	int bus;
 
 #ifdef CONFIG_SYS_I2C_INIT_BOARD
 	/*
@@ -90,67 +91,57 @@ void i2c_init(int speed, int slaveaddr)
 	i2c_init_board();
 #endif
 
-	for (bus = 0; bus < CONFIG_SYS_MAX_I2C_BUS; bus++) {
-		I2C_SET_BUS(bus);
-
-		/* Set i2c pointer after calling I2C_SET_BUS() */
-		i2c = (struct ppc4xx_i2c *)I2C_BASE_ADDR;
-
-		/* Handle possible failed I2C state */
-		/* FIXME: put this into i2c_init_board()? */
-		_i2c_bus_reset();
+	/* Handle possible failed I2C state */
+	/* FIXME: put this into i2c_init_board()? */
+	_i2c_bus_reset(adap);
 
-		/* clear lo master address */
-		out_8(&i2c->lmadr, 0);
+	/* clear lo master address */
+	out_8(&i2c->lmadr, 0);
 
-		/* clear hi master address */
-		out_8(&i2c->hmadr, 0);
-
-		/* clear lo slave address */
-		out_8(&i2c->lsadr, 0);
+	/* clear hi master address */
+	out_8(&i2c->hmadr, 0);
 
-		/* clear hi slave address */
-		out_8(&i2c->hsadr, 0);
+	/* clear lo slave address */
+	out_8(&i2c->lsadr, 0);
 
-		/* Clock divide Register */
-		/* set divisor according to freq_opb */
-		divisor = (get_OPB_freq() - 1) / 10000000;
-		if (divisor == 0)
-			divisor = 1;
-		out_8(&i2c->clkdiv, divisor);
+	/* clear hi slave address */
+	out_8(&i2c->hsadr, 0);
 
-		/* no interrupts */
-		out_8(&i2c->intrmsk, 0);
+	/* Clock divide Register */
+	/* set divisor according to freq_opb */
+	divisor = (get_OPB_freq() - 1) / 10000000;
+	if (divisor == 0)
+		divisor = 1;
+	out_8(&i2c->clkdiv, divisor);
 
-		/* clear transfer count */
-		out_8(&i2c->xfrcnt, 0);
+	/* no interrupts */
+	out_8(&i2c->intrmsk, 0);
 
-		/* clear extended control & stat */
-		/* write 1 in SRC SRS SWC SWS to clear these fields */
-		out_8(&i2c->xtcntlss, 0xF0);
+	/* clear transfer count */
+	out_8(&i2c->xfrcnt, 0);
 
-		/* Mode Control Register
-		   Flush Slave/Master data buffer */
-		out_8(&i2c->mdcntl, IIC_MDCNTL_FSDB | IIC_MDCNTL_FMDB);
+	/* clear extended control & stat */
+	/* write 1 in SRC SRS SWC SWS to clear these fields */
+	out_8(&i2c->xtcntlss, 0xF0);
 
-		val = in_8(&i2c->mdcntl);
+	/* Mode Control Register
+	   Flush Slave/Master data buffer */
+	out_8(&i2c->mdcntl, IIC_MDCNTL_FSDB | IIC_MDCNTL_FMDB);
 
-		/* Ignore General Call, slave transfers are ignored,
-		 * disable interrupts, exit unknown bus state, enable hold
-		 * SCL 100kHz normaly or FastMode for 400kHz and above
-		 */
+	val = in_8(&i2c->mdcntl);
 
-		val |= IIC_MDCNTL_EUBS | IIC_MDCNTL_HSCL;
-		if (speed >= 400000)
-			val |= IIC_MDCNTL_FSM;
-		out_8(&i2c->mdcntl, val);
+	/* Ignore General Call, slave transfers are ignored,
+	 * disable interrupts, exit unknown bus state, enable hold
+	 * SCL 100kHz normaly or FastMode for 400kHz and above
+	 */
 
-		/* clear control reg */
-		out_8(&i2c->cntl, 0x00);
-	}
+	val |= IIC_MDCNTL_EUBS | IIC_MDCNTL_HSCL;
+	if (speed >= 400000)
+		val |= IIC_MDCNTL_FSM;
+	out_8(&i2c->mdcntl, val);
 
-	/* set to SPD bus as default bus upon powerup */
-	I2C_SET_BUS(CONFIG_SYS_SPD_BUS_NUM);
+	/* clear control reg */
+	out_8(&i2c->cntl, 0x00);
 }
 
 /*
@@ -178,14 +169,15 @@ void i2c_init(int speed, int slaveaddr)
  *
  * It does not check XFRCNT.
  */
-static int i2c_transfer(unsigned char cmd_type,
+static int _i2c_transfer(struct i2c_adapter *adap,
+			unsigned char cmd_type,
 			unsigned char chip,
 			unsigned char addr[],
 			unsigned char addr_len,
 			unsigned char data[],
 			unsigned short data_len)
 {
-	struct ppc4xx_i2c *i2c = (struct ppc4xx_i2c *)I2C_BASE_ADDR;
+	struct ppc4xx_i2c *i2c = ppc4xx_get_i2c(adap->hwadapnr);
 	u8 *ptr;
 	int reading;
 	int tran, cnt;
@@ -329,7 +321,7 @@ static int i2c_transfer(unsigned char cmd_type,
 	return result;
 }
 
-int i2c_probe(uchar chip)
+static int ppc4xx_i2c_probe(struct i2c_adapter *adap, uchar chip)
 {
 	uchar buf[1];
 
@@ -340,11 +332,11 @@ int i2c_probe(uchar chip)
 	 * address was <ACK>ed (i.e. there was a chip at that address which
 	 * drove the data line low).
 	 */
-	return (i2c_transfer(1, chip << 1, 0, 0, buf, 1) != 0);
+	return (_i2c_transfer(adap, 1, chip << 1, 0, 0, buf, 1) != 0);
 }
 
-static int ppc4xx_i2c_transfer(uchar chip, uint addr, int alen, uchar *buffer,
-			       int len, int read)
+static int ppc4xx_i2c_transfer(struct i2c_adapter *adap, uchar chip, uint addr,
+			       int alen, uchar *buffer, int len, int read)
 {
 	uchar xaddr[4];
 	int ret;
@@ -378,43 +370,50 @@ static int ppc4xx_i2c_transfer(uchar chip, uint addr, int alen, uchar *buffer,
 		chip |= ((addr >> (alen * 8)) &
 			 CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW);
 #endif
-	if ((ret = i2c_transfer(read, chip << 1, &xaddr[4 - alen], alen,
-				buffer, len)) != 0) {
+	ret = _i2c_transfer(adap, read, chip << 1, &xaddr[4 - alen], alen,
+			    buffer, len);
+	if (ret) {
 		printf("I2C %s: failed %d\n", read ? "read" : "write", ret);
-
 		return 1;
 	}
 
 	return 0;
 }
 
-int i2c_read(uchar chip, uint addr, int alen, uchar * buffer, int len)
+static int ppc4xx_i2c_read(struct i2c_adapter *adap, uchar chip, uint addr,
+			   int alen, uchar *buffer, int len)
 {
-	return ppc4xx_i2c_transfer(chip, addr, alen, buffer, len, 1);
+	return ppc4xx_i2c_transfer(adap, chip, addr, alen, buffer, len, 1);
 }
 
-int i2c_write(uchar chip, uint addr, int alen, uchar * buffer, int len)
+static int ppc4xx_i2c_write(struct i2c_adapter *adap, uchar chip, uint addr,
+			    int alen, uchar *buffer, int len)
 {
-	return ppc4xx_i2c_transfer(chip, addr, alen, buffer, len, 0);
+	return ppc4xx_i2c_transfer(adap, chip, addr, alen, buffer, len, 0);
 }
 
-#if defined(CONFIG_I2C_MULTI_BUS)
-/*
- * Functions for multiple I2C bus handling
- */
-unsigned int i2c_get_bus_num(void)
+static unsigned int ppc4xx_i2c_set_bus_speed(struct i2c_adapter *adap,
+					     unsigned int speed)
 {
-	return i2c_bus_num;
-}
-
-int i2c_set_bus_num(unsigned int bus)
-{
-	if (bus >= CONFIG_SYS_MAX_I2C_BUS)
+	if (speed != adap->speed)
 		return -1;
-
-	i2c_bus_num = bus;
-
-	return 0;
+	return speed;
 }
-#endif	/* CONFIG_I2C_MULTI_BUS */
-#endif	/* CONFIG_HARD_I2C */
+
+/*
+ * Register ppc4xx i2c adapters
+ */
+#ifdef CONFIG_SYS_I2C_PPC4XX_CH0
+U_BOOT_I2C_ADAP_COMPLETE(ppc4xx_0, ppc4xx_i2c_init, ppc4xx_i2c_probe,
+			 ppc4xx_i2c_read, ppc4xx_i2c_write,
+			 ppc4xx_i2c_set_bus_speed,
+			 CONFIG_SYS_I2C_PPC4XX_SPEED_0,
+			 CONFIG_SYS_I2C_PPC4XX_SLAVE_0, 0)
+#endif
+#ifdef CONFIG_SYS_I2C_PPC4XX_CH1
+U_BOOT_I2C_ADAP_COMPLETE(ppc4xx_1, ppc4xx_i2c_init, ppc4xx_i2c_probe,
+			 ppc4xx_i2c_read, ppc4xx_i2c_write,
+			 ppc4xx_i2c_set_bus_speed,
+			 CONFIG_SYS_I2C_PPC4XX_SPEED_1,
+			 CONFIG_SYS_I2C_PPC4XX_SLAVE_1, 1)
+#endif
diff --git a/drivers/i2c/soft_i2c.c b/drivers/i2c/soft_i2c.c
index 0a1423016e..a2baec0ace 100644
--- a/drivers/i2c/soft_i2c.c
+++ b/drivers/i2c/soft_i2c.c
@@ -1,4 +1,8 @@
 /*
+ * (C) Copyright 2009
+ * Heiko Schocher, DENX Software Engineering, hs@denx.de.
+ * Changes for multibus/multiadapter I2C support.
+ *
  * (C) Copyright 2001, 2002
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
@@ -87,14 +91,30 @@
 
 /* #define	DEBUG_I2C	*/
 
-#ifdef DEBUG_I2C
 DECLARE_GLOBAL_DATA_PTR;
+
+#ifndef	I2C_SOFT_DECLARATIONS
+# if defined(CONFIG_MPC8260)
+#  define I2C_SOFT_DECLARATIONS volatile ioport_t *iop = \
+		ioport_addr((immap_t *)CONFIG_SYS_IMMR, I2C_PORT);
+# elif defined(CONFIG_8xx)
+#  define I2C_SOFT_DECLARATIONS	volatile immap_t *immr = \
+		(immap_t *)CONFIG_SYS_IMMR;
+# else
+#  define I2C_SOFT_DECLARATIONS
+# endif
+#endif
+
+#if !defined(CONFIG_SYS_SOFT_I2C_SPEED)
+#define CONFIG_SYS_SOFT_I2C_SPEED CONFIG_SYS_I2C_SPEED
+#endif
+#if !defined(CONFIG_SYS_SOFT_I2C_SLAVE)
+#define CONFIG_SYS_SOFT_I2C_SLAVE CONFIG_SYS_I2C_SLAVE
 #endif
 
 /*-----------------------------------------------------------------------
  * Definitions
  */
-
 #define RETRIES		0
 
 #define I2C_ACK		0		/* PD_SDA level to ack a byte */
@@ -109,10 +129,6 @@ DECLARE_GLOBAL_DATA_PTR;
 #define PRINTD(fmt,args...)
 #endif
 
-#if defined(CONFIG_I2C_MULTI_BUS)
-static unsigned int i2c_bus_num __attribute__ ((section (".data"))) = 0;
-#endif /* CONFIG_I2C_MULTI_BUS */
-
 /*-----------------------------------------------------------------------
  * Local functions
  */
@@ -251,39 +267,6 @@ static int write_byte(uchar data)
 	return(nack);	/* not a nack is an ack */
 }
 
-#if defined(CONFIG_I2C_MULTI_BUS)
-/*
- * Functions for multiple I2C bus handling
- */
-unsigned int i2c_get_bus_num(void)
-{
-	return i2c_bus_num;
-}
-
-int i2c_set_bus_num(unsigned int bus)
-{
-#if defined(CONFIG_I2C_MUX)
-	if (bus < CONFIG_SYS_MAX_I2C_BUS) {
-		i2c_bus_num = bus;
-	} else {
-		int	ret;
-
-		ret = i2x_mux_select_mux(bus);
-		i2c_init_board();
-		if (ret == 0)
-			i2c_bus_num = bus;
-		else
-			return ret;
-	}
-#else
-	if (bus >= CONFIG_SYS_MAX_I2C_BUS)
-		return -1;
-	i2c_bus_num = bus;
-#endif
-	return 0;
-}
-#endif
-
 /*-----------------------------------------------------------------------
  * if ack == I2C_ACK, ACK the byte so can continue reading, else
  * send I2C_NOACK to end the read.
@@ -314,14 +297,10 @@ static uchar read_byte(int ack)
 	return(data);
 }
 
-/*=====================================================================*/
-/*                         Public Functions                            */
-/*=====================================================================*/
-
 /*-----------------------------------------------------------------------
  * Initialization
  */
-void i2c_init (int speed, int slaveaddr)
+static void soft_i2c_init(struct i2c_adapter *adap, int speed, int slaveaddr)
 {
 #if defined(CONFIG_SYS_I2C_INIT_BOARD)
 	/* call board specific i2c bus reset routine before accessing the   */
@@ -344,7 +323,7 @@ void i2c_init (int speed, int slaveaddr)
  * completion of EEPROM writes since the chip stops responding until
  * the write completes (typically 10mSec).
  */
-int i2c_probe(uchar addr)
+static int soft_i2c_probe(struct i2c_adapter *adap, uint8_t addr)
 {
 	int rc;
 
@@ -362,7 +341,8 @@ int i2c_probe(uchar addr)
 /*-----------------------------------------------------------------------
  * Read bytes
  */
-int  i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
+static int  soft_i2c_read(struct i2c_adapter *adap, uchar chip, uint addr,
+			int alen, uchar *buffer, int len)
 {
 	int shift;
 	PRINTD("i2c_read: chip %02X addr %02X alen %d buffer %p len %d\n",
@@ -436,7 +416,8 @@ int  i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
 /*-----------------------------------------------------------------------
  * Write bytes
  */
-int  i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
+static int  soft_i2c_write(struct i2c_adapter *adap, uchar chip, uint addr,
+			int alen, uchar *buffer, int len)
 {
 	int shift, failures = 0;
 
@@ -466,3 +447,32 @@ int  i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
 	send_stop();
 	return(failures);
 }
+
+/*
+ * Register soft i2c adapters
+ */
+U_BOOT_I2C_ADAP_COMPLETE(soft0, soft_i2c_init, soft_i2c_probe,
+			 soft_i2c_read, soft_i2c_write, NULL,
+			 CONFIG_SYS_I2C_SOFT_SPEED, CONFIG_SYS_I2C_SOFT_SLAVE,
+			 0)
+#if defined(I2C_SOFT_DECLARATIONS2)
+U_BOOT_I2C_ADAP_COMPLETE(soft1, soft_i2c_init, soft_i2c_probe,
+			 soft_i2c_read, soft_i2c_write, NULL,
+			 CONFIG_SYS_I2C_SOFT_SPEED_2,
+			 CONFIG_SYS_I2C_SOFT_SLAVE_2,
+			 1)
+#endif
+#if defined(I2C_SOFT_DECLARATIONS3)
+U_BOOT_I2C_ADAP_COMPLETE(soft2, soft_i2c_init, soft_i2c_probe,
+			 soft_i2c_read, soft_i2c_write, NULL,
+			 CONFIG_SYS_I2C_SOFT_SPEED_3,
+			 CONFIG_SYS_I2C_SOFT_SLAVE_3,
+			 2)
+#endif
+#if defined(I2C_SOFT_DECLARATIONS4)
+U_BOOT_I2C_ADAP_COMPLETE(soft3, soft_i2c_init, soft_i2c_probe,
+			 soft_i2c_read, soft_i2c_write, NULL,
+			 CONFIG_SYS_I2C_SOFT_SPEED_4,
+			 CONFIG_SYS_I2C_SOFT_SLAVE_4,
+			 3)
+#endif
diff --git a/drivers/i2c/tegra_i2c.c b/drivers/i2c/tegra_i2c.c
index e96d5d5d09..9ac3969a07 100644
--- a/drivers/i2c/tegra_i2c.c
+++ b/drivers/i2c/tegra_i2c.c
@@ -19,8 +19,6 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-static unsigned int i2c_bus_num;
-
 /* Information about i2c controller */
 struct i2c_bus {
 	int			id;
@@ -268,7 +266,8 @@ exit:
 	return error;
 }
 
-static int tegra_i2c_write_data(u32 addr, u8 *data, u32 len)
+static int tegra_i2c_write_data(struct i2c_bus *bus, u32 addr, u8 *data,
+				u32 len)
 {
 	int error;
 	struct i2c_trans_info trans_info;
@@ -279,14 +278,15 @@ static int tegra_i2c_write_data(u32 addr, u8 *data, u32 len)
 	trans_info.num_bytes = len;
 	trans_info.is_10bit_address = 0;
 
-	error = send_recv_packets(&i2c_controllers[i2c_bus_num], &trans_info);
+	error = send_recv_packets(bus, &trans_info);
 	if (error)
 		debug("tegra_i2c_write_data: Error (%d) !!!\n", error);
 
 	return error;
 }
 
-static int tegra_i2c_read_data(u32 addr, u8 *data, u32 len)
+static int tegra_i2c_read_data(struct i2c_bus *bus, u32 addr, u8 *data,
+			       u32 len)
 {
 	int error;
 	struct i2c_trans_info trans_info;
@@ -297,7 +297,7 @@ static int tegra_i2c_read_data(u32 addr, u8 *data, u32 len)
 	trans_info.num_bytes = len;
 	trans_info.is_10bit_address = 0;
 
-	error = send_recv_packets(&i2c_controllers[i2c_bus_num], &trans_info);
+	error = send_recv_packets(bus, &trans_info);
 	if (error)
 		debug("tegra_i2c_read_data: Error (%d) !!!\n", error);
 
@@ -308,18 +308,35 @@ static int tegra_i2c_read_data(u32 addr, u8 *data, u32 len)
 #error "Please enable device tree support to use this driver"
 #endif
 
-unsigned int i2c_get_bus_speed(void)
+/**
+ * Check that a bus number is valid and return a pointer to it
+ *
+ * @param bus_num	Bus number to check / return
+ * @return pointer to bus, if valid, else NULL
+ */
+static struct i2c_bus *tegra_i2c_get_bus(struct i2c_adapter *adap)
 {
-	return i2c_controllers[i2c_bus_num].speed;
+	struct i2c_bus *bus;
+
+	bus = &i2c_controllers[adap->hwadapnr];
+	if (!bus->inited) {
+		debug("%s: Bus %u not available\n", __func__, adap->hwadapnr);
+		return NULL;
+	}
+
+	return bus;
 }
 
-int i2c_set_bus_speed(unsigned int speed)
+static unsigned int tegra_i2c_set_bus_speed(struct i2c_adapter *adap,
+			unsigned int speed)
 {
-	struct i2c_bus *i2c_bus;
+	struct i2c_bus *bus;
 
-	i2c_bus = &i2c_controllers[i2c_bus_num];
-	i2c_bus->speed = speed;
-	i2c_init_controller(i2c_bus);
+	bus = tegra_i2c_get_bus(adap);
+	if (!bus)
+		return 0;
+	bus->speed = speed;
+	i2c_init_controller(bus);
 
 	return 0;
 }
@@ -434,7 +451,7 @@ void i2c_init_board(void)
 		return;
 }
 
-void i2c_init(int speed, int slaveaddr)
+static void tegra_i2c_init(struct i2c_adapter *adap, int speed, int slaveaddr)
 {
 	/* This will override the speed selected in the fdt for that port */
 	debug("i2c_init(speed=%u, slaveaddr=0x%x)\n", speed, slaveaddr);
@@ -442,7 +459,7 @@ void i2c_init(int speed, int slaveaddr)
 }
 
 /* i2c write version without the register address */
-int i2c_write_data(uchar chip, uchar *buffer, int len)
+int i2c_write_data(struct i2c_bus *bus, uchar chip, uchar *buffer, int len)
 {
 	int rc;
 
@@ -454,7 +471,7 @@ int i2c_write_data(uchar chip, uchar *buffer, int len)
 	debug("\n");
 
 	/* Shift 7-bit address over for lower-level i2c functions */
-	rc = tegra_i2c_write_data(chip << 1, buffer, len);
+	rc = tegra_i2c_write_data(bus, chip << 1, buffer, len);
 	if (rc)
 		debug("i2c_write_data(): rc=%d\n", rc);
 
@@ -462,13 +479,13 @@ int i2c_write_data(uchar chip, uchar *buffer, int len)
 }
 
 /* i2c read version without the register address */
-int i2c_read_data(uchar chip, uchar *buffer, int len)
+int i2c_read_data(struct i2c_bus *bus, uchar chip, uchar *buffer, int len)
 {
 	int rc;
 
 	debug("inside i2c_read_data():\n");
 	/* Shift 7-bit address over for lower-level i2c functions */
-	rc = tegra_i2c_read_data(chip << 1, buffer, len);
+	rc = tegra_i2c_read_data(bus, chip << 1, buffer, len);
 	if (rc) {
 		debug("i2c_read_data(): rc=%d\n", rc);
 		return rc;
@@ -484,14 +501,18 @@ int i2c_read_data(uchar chip, uchar *buffer, int len)
 }
 
 /* Probe to see if a chip is present. */
-int i2c_probe(uchar chip)
+static int tegra_i2c_probe(struct i2c_adapter *adap, uchar chip)
 {
+	struct i2c_bus *bus;
 	int rc;
 	uchar reg;
 
 	debug("i2c_probe: addr=0x%x\n", chip);
+	bus = tegra_i2c_get_bus(adap);
+	if (!bus)
+		return 1;
 	reg = 0;
-	rc = i2c_write_data(chip, &reg, 1);
+	rc = i2c_write_data(bus, chip, &reg, 1);
 	if (rc) {
 		debug("Error probing 0x%x.\n", chip);
 		return 1;
@@ -506,13 +527,18 @@ static int i2c_addr_ok(const uint addr, const int alen)
 }
 
 /* Read bytes */
-int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
+static int tegra_i2c_read(struct i2c_adapter *adap, uchar chip, uint addr,
+			int alen, uchar *buffer, int len)
 {
+	struct i2c_bus *bus;
 	uint offset;
 	int i;
 
 	debug("i2c_read: chip=0x%x, addr=0x%x, len=0x%x\n",
 				chip, addr, len);
+	bus = tegra_i2c_get_bus(adap);
+	if (!bus)
+		return 1;
 	if (!i2c_addr_ok(addr, alen)) {
 		debug("i2c_read: Bad address %x.%d.\n", addr, alen);
 		return 1;
@@ -524,13 +550,13 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
 				data[alen - i - 1] =
 					(addr + offset) >> (8 * i);
 			}
-			if (i2c_write_data(chip, data, alen)) {
+			if (i2c_write_data(bus, chip, data, alen)) {
 				debug("i2c_read: error sending (0x%x)\n",
 					addr);
 				return 1;
 			}
 		}
-		if (i2c_read_data(chip, buffer + offset, 1)) {
+		if (i2c_read_data(bus, chip, buffer + offset, 1)) {
 			debug("i2c_read: error reading (0x%x)\n", addr);
 			return 1;
 		}
@@ -540,13 +566,18 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
 }
 
 /* Write bytes */
-int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
+static int tegra_i2c_write(struct i2c_adapter *adap, uchar chip, uint addr,
+			int alen, uchar *buffer, int len)
 {
+	struct i2c_bus *bus;
 	uint offset;
 	int i;
 
 	debug("i2c_write: chip=0x%x, addr=0x%x, len=0x%x\n",
 				chip, addr, len);
+	bus = tegra_i2c_get_bus(adap);
+	if (!bus)
+		return 1;
 	if (!i2c_addr_ok(addr, alen)) {
 		debug("i2c_write: Bad address %x.%d.\n", addr, alen);
 		return 1;
@@ -556,7 +587,7 @@ int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
 		for (i = 0; i < alen; i++)
 			data[alen - i - 1] = (addr + offset) >> (8 * i);
 		data[alen] = buffer[offset];
-		if (i2c_write_data(chip, data, alen + 1)) {
+		if (i2c_write_data(bus, chip, data, alen + 1)) {
 			debug("i2c_write: error sending (0x%x)\n", addr);
 			return 1;
 		}
@@ -565,30 +596,11 @@ int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
 	return 0;
 }
 
-#if defined(CONFIG_I2C_MULTI_BUS)
-/*
- * Functions for multiple I2C bus handling
- */
-unsigned int i2c_get_bus_num(void)
-{
-	return i2c_bus_num;
-}
-
-int i2c_set_bus_num(unsigned int bus)
-{
-	if (bus >= TEGRA_I2C_NUM_CONTROLLERS || !i2c_controllers[bus].inited)
-		return -1;
-	i2c_bus_num = bus;
-
-	return 0;
-}
-#endif
-
 int tegra_i2c_get_dvc_bus_num(void)
 {
 	int i;
 
-	for (i = 0; i < CONFIG_SYS_MAX_I2C_BUS; i++) {
+	for (i = 0; i < TEGRA_I2C_NUM_CONTROLLERS; i++) {
 		struct i2c_bus *bus = &i2c_controllers[i];
 
 		if (bus->inited && bus->is_dvc)
@@ -597,3 +609,19 @@ int tegra_i2c_get_dvc_bus_num(void)
 
 	return -1;
 }
+
+/*
+ * Register soft i2c adapters
+ */
+U_BOOT_I2C_ADAP_COMPLETE(tegra0, tegra_i2c_init, tegra_i2c_probe,
+			 tegra_i2c_read, tegra_i2c_write,
+			 tegra_i2c_set_bus_speed, 100000, 0, 0)
+U_BOOT_I2C_ADAP_COMPLETE(tegra1, tegra_i2c_init, tegra_i2c_probe,
+			 tegra_i2c_read, tegra_i2c_write,
+			 tegra_i2c_set_bus_speed, 100000, 0, 1)
+U_BOOT_I2C_ADAP_COMPLETE(tegra2, tegra_i2c_init, tegra_i2c_probe,
+			 tegra_i2c_read, tegra_i2c_write,
+			 tegra_i2c_set_bus_speed, 100000, 0, 2)
+U_BOOT_I2C_ADAP_COMPLETE(tegra3, tegra_i2c_init, tegra_i2c_probe,
+			 tegra_i2c_read, tegra_i2c_write,
+			 tegra_i2c_set_bus_speed, 100000, 0, 3)
diff --git a/include/asm-generic/global_data.h b/include/asm-generic/global_data.h
index 77260a8d20..77e06fb4fe 100644
--- a/include/asm-generic/global_data.h
+++ b/include/asm-generic/global_data.h
@@ -69,6 +69,9 @@ typedef struct global_data {
 #ifdef CONFIG_TRACE
 	void		*trace_buff;	/* The trace buffer */
 #endif
+#if defined(CONFIG_SYS_I2C)
+	int		cur_i2c_bus;	/* current used i2c bus */
+#endif
 	struct arch_global_data arch;	/* architecture-specific data */
 } gd_t;
 #endif
diff --git a/include/configs/A3000.h b/include/configs/A3000.h
index 6c204db0ab..90a21768e9 100644
--- a/include/configs/A3000.h
+++ b/include/configs/A3000.h
@@ -70,8 +70,8 @@
  * PCI stuff
  *-----------------------------------------------------------------------
  */
-#define CONFIG_HARD_I2C		1		/* To enable I2C support	*/
-#undef	CONFIG_SOFT_I2C				/* I2C bit-banged		*/
+#define CONFIG_HARD_I2C		1		/* To enable I2C support */
+#undef	CONFIG_SYS_I2C_SOFT			/* I2C bit-banged */
 #define CONFIG_SYS_I2C_SPEED		400000		/* I2C speed and slave address	*/
 #define CONFIG_SYS_I2C_SLAVE		0x7F
 
diff --git a/include/configs/APC405.h b/include/configs/APC405.h
index 82245c4586..37bcac32c7 100644
--- a/include/configs/APC405.h
+++ b/include/configs/APC405.h
@@ -290,10 +290,11 @@
 /*
  * I2C EEPROM (CAT24WC16) for environment
  */
-#define CONFIG_HARD_I2C			/* I2c with hardware support */
-#define CONFIG_PPC4XX_I2C		/* use PPC4xx driver		*/
-#define CONFIG_SYS_I2C_SPEED		100000	/* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_PPC4XX
+#define CONFIG_SYS_I2C_PPC4XX_CH0
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0		100000
+#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0		0x7F
 
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT28WC08 */
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	1	/* Bytes of address */
diff --git a/include/configs/ASH405.h b/include/configs/ASH405.h
index 233bc68ab8..54de966741 100644
--- a/include/configs/ASH405.h
+++ b/include/configs/ASH405.h
@@ -231,10 +231,11 @@
 /*-----------------------------------------------------------------------
  * I2C EEPROM (CAT24WC16) for environment
  */
-#define CONFIG_HARD_I2C			/* I2c with hardware support */
-#define CONFIG_PPC4XX_I2C		/* use PPC4xx driver		*/
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_PPC4XX
+#define CONFIG_SYS_I2C_PPC4XX_CH0
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0		400000
+#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0		0x7F
 
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT28WC08		*/
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1	/* Bytes of address		*/
diff --git a/include/configs/B4860QDS.h b/include/configs/B4860QDS.h
index ad1bd7eb77..09043435b4 100644
--- a/include/configs/B4860QDS.h
+++ b/include/configs/B4860QDS.h
@@ -443,14 +443,14 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_FIT_VERBOSE	/* enable fit_format_{error,warning}() */
 
 /* I2C */
-#define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
-#define CONFIG_HARD_I2C		/* I2C with hardware support */
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_I2C_CMD_TREE
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed in Hz */
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_OFFSET		0x118000
-#define CONFIG_SYS_I2C2_OFFSET		0x119000
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL		/* Use FSL common I2C driver */
+#define CONFIG_SYS_FSL_I2C_SPEED	400000	/* I2C speed in Hz */
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C2_SPEED	400000	/* I2C speed in Hz */
+#define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x118000
+#define CONFIG_SYS_FSL_I2C2_OFFSET	0x119000
 
 /*
  * RTC configuration
diff --git a/include/configs/BSC9131RDB.h b/include/configs/BSC9131RDB.h
index b6a879058e..948394eddd 100644
--- a/include/configs/BSC9131RDB.h
+++ b/include/configs/BSC9131RDB.h
@@ -259,13 +259,11 @@ extern unsigned long get_sdram_size(void);
 #define CONFIG_FIT
 #define CONFIG_FIT_VERBOSE	/* enable fit_format_{error,warning}() */
 
-#define CONFIG_FSL_I2C			/* Use FSL common I2C driver */
-#define CONFIG_HARD_I2C			/* I2C with hardware support */
-#undef CONFIG_SOFT_I2C			/* I2C bit-banged */
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_I2C_CMD_TREE
-#define CONFIG_SYS_I2C_SPEED		400000 /* I2C speed and slave address*/
-#define CONFIG_SYS_I2C_OFFSET		0x3000
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
 
 /* I2C EEPROM */
 #define CONFIG_CMD_EEPROM
diff --git a/include/configs/BSC9132QDS.h b/include/configs/BSC9132QDS.h
index e8e2c6f24d..1ab6891585 100644
--- a/include/configs/BSC9132QDS.h
+++ b/include/configs/BSC9132QDS.h
@@ -435,15 +435,14 @@ combinations. this should be removed later
 #define CONFIG_FIT
 #define CONFIG_FIT_VERBOSE	/* enable fit_format_{error,warning}() */
 
-#define CONFIG_FSL_I2C			/* Use FSL common I2C driver */
-#define CONFIG_HARD_I2C			/* I2C with hardware support */
-#undef CONFIG_SOFT_I2C			/* I2C bit-banged */
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_I2C_CMD_TREE
-#define CONFIG_SYS_I2C_SPEED		400800 /* I2C speed and slave address*/
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_OFFSET		0x3000
-#define CONFIG_SYS_I2C2_OFFSET		0x3100
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400800 /* I2C speed and slave address*/
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C2_SPEED	400800 /* I2C speed and slave address*/
+#define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+#define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100
 
 /* I2C EEPROM */
 #define CONFIG_ID_EEPROM
diff --git a/include/configs/CANBT.h b/include/configs/CANBT.h
index 66e3790782..40471b78a1 100644
--- a/include/configs/CANBT.h
+++ b/include/configs/CANBT.h
@@ -164,13 +164,14 @@
 /*-----------------------------------------------------------------------
  * I2C EEPROM (CAT24WC08) for environment
  */
-#define CONFIG_HARD_I2C			/* I2C with hardware support */
-#define CONFIG_PPC4XX_I2C		/* use PPC4xx driver		*/
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-
-#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT28WC08		*/
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1	/* bytes of address		*/
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_PPC4XX
+#define CONFIG_SYS_I2C_PPC4XX_CH0
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0		400000
+#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0		0x7F
+
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT28WC08	*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1	/* bytes of address	*/
 /* mask of address bits that overflow into the "EEPROM chip address"	*/
 #define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW	0x07
 
diff --git a/include/configs/CATcenter.h b/include/configs/CATcenter.h
index d6fca13a9f..3906863f05 100644
--- a/include/configs/CATcenter.h
+++ b/include/configs/CATcenter.h
@@ -389,10 +389,11 @@
 /*-----------------------------------------------------------------------
  * I2C EEPROM (CAT24WC16) for environment
  */
-#define CONFIG_HARD_I2C			/* I2c with hardware support */
-#define CONFIG_PPC4XX_I2C		/* use PPC4xx driver		*/
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_PPC4XX
+#define CONFIG_SYS_I2C_PPC4XX_CH0
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0		400000
+#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0		0x7F
 
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT28WC08		*/
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1	/* Bytes of address		*/
diff --git a/include/configs/CMS700.h b/include/configs/CMS700.h
index e7609a75eb..323eac3fb4 100644
--- a/include/configs/CMS700.h
+++ b/include/configs/CMS700.h
@@ -210,10 +210,11 @@
 /*-----------------------------------------------------------------------
  * I2C EEPROM (CAT24WC16) for environment
  */
-#define CONFIG_HARD_I2C			/* I2c with hardware support */
-#define CONFIG_PPC4XX_I2C		/* use PPC4xx driver		*/
-#define CONFIG_SYS_I2C_SPEED		100000	/* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_PPC4XX
+#define CONFIG_SYS_I2C_PPC4XX_CH0
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0		100000
+#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0		0x7F
 
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT28WC08		*/
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1	/* Bytes of address		*/
diff --git a/include/configs/CPCI2DP.h b/include/configs/CPCI2DP.h
index 0f98274418..bd9fd6ee7b 100644
--- a/include/configs/CPCI2DP.h
+++ b/include/configs/CPCI2DP.h
@@ -195,10 +195,11 @@
 /*-----------------------------------------------------------------------
  * I2C EEPROM (CAT24WC16) for environment
  */
-#define CONFIG_HARD_I2C			/* I2c with hardware support */
-#define CONFIG_PPC4XX_I2C		/* use PPC4xx driver		*/
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_PPC4XX
+#define CONFIG_SYS_I2C_PPC4XX_CH0
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0		400000
+#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0		0x7F
 
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT28WC08		*/
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1	/* Bytes of address		*/
diff --git a/include/configs/CPCI405.h b/include/configs/CPCI405.h
index c6fa22a639..94ef16e06c 100644
--- a/include/configs/CPCI405.h
+++ b/include/configs/CPCI405.h
@@ -244,10 +244,11 @@
 /*-----------------------------------------------------------------------
  * I2C EEPROM (CAT24WC08) for environment
  */
-#define CONFIG_HARD_I2C			/* I2c with hardware support */
-#define CONFIG_PPC4XX_I2C		/* use PPC4xx driver		*/
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_PPC4XX
+#define CONFIG_SYS_I2C_PPC4XX_CH0
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0		400000
+#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0		0x7F
 
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT28WC08		*/
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1	/* Bytes of address		*/
diff --git a/include/configs/CPCI4052.h b/include/configs/CPCI4052.h
index f43660ebe5..8383c19359 100644
--- a/include/configs/CPCI4052.h
+++ b/include/configs/CPCI4052.h
@@ -271,10 +271,11 @@
 /*-----------------------------------------------------------------------
  * I2C EEPROM (CAT24WC16) for environment
  */
-#define CONFIG_HARD_I2C			/* I2c with hardware support */
-#define CONFIG_PPC4XX_I2C		/* use PPC4xx driver		*/
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_PPC4XX
+#define CONFIG_SYS_I2C_PPC4XX_CH0
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0		400000
+#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0		0x7F
 
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT28WC08		*/
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1	/* Bytes of address		*/
diff --git a/include/configs/CPCI405AB.h b/include/configs/CPCI405AB.h
index dbf0662b54..ec9f5aec4a 100644
--- a/include/configs/CPCI405AB.h
+++ b/include/configs/CPCI405AB.h
@@ -247,10 +247,11 @@
 /*-----------------------------------------------------------------------
  * I2C EEPROM (CAT24WC32) for environment
  */
-#define CONFIG_HARD_I2C			/* I2c with hardware support */
-#define CONFIG_PPC4XX_I2C		/* use PPC4xx driver		*/
-#define CONFIG_SYS_I2C_SPEED		100000	/* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_PPC4XX
+#define CONFIG_SYS_I2C_PPC4XX_CH0
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0		100000
+#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0		0x7F
 
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT28WC32		*/
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2	/* Bytes of address		*/
diff --git a/include/configs/CPCI405DT.h b/include/configs/CPCI405DT.h
index e5a962ae23..ba926abdc0 100644
--- a/include/configs/CPCI405DT.h
+++ b/include/configs/CPCI405DT.h
@@ -266,10 +266,11 @@
 /*-----------------------------------------------------------------------
  * I2C EEPROM (CAT24WC16) for environment
  */
-#define CONFIG_HARD_I2C			/* I2c with hardware support */
-#define CONFIG_PPC4XX_I2C		/* use PPC4xx driver		*/
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_PPC4XX
+#define CONFIG_SYS_I2C_PPC4XX_CH0
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0		400000
+#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0		0x7F
 
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT28WC08		*/
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1	/* Bytes of address		*/
diff --git a/include/configs/CPCIISER4.h b/include/configs/CPCIISER4.h
index 2a89efe190..dc4df29455 100644
--- a/include/configs/CPCIISER4.h
+++ b/include/configs/CPCIISER4.h
@@ -180,10 +180,11 @@
 /*-----------------------------------------------------------------------
  * I2C EEPROM (CAT24WC08) for environment
  */
-#define CONFIG_HARD_I2C			/* I2C with hardware support */
-#define CONFIG_PPC4XX_I2C		/* use PPC4xx driver		*/
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_PPC4XX
+#define CONFIG_SYS_I2C_PPC4XX_CH0
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0		400000
+#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0		0x7F
 
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT28WC08		*/
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1	/* Bytes of address		*/
diff --git a/include/configs/CPU86.h b/include/configs/CPU86.h
index b11262690f..a85a418fb1 100644
--- a/include/configs/CPU86.h
+++ b/include/configs/CPU86.h
@@ -113,10 +113,11 @@
 /*-----------------------------------------------------------------------
  * I2C/EEPROM/RTC configuration
  */
-#define	CONFIG_SOFT_I2C			/* Software I2C support enabled	*/
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT			/* I2C bit-banged */
+#define CONFIG_SYS_I2C_SOFT_SPEED	50000
+#define CONFIG_SYS_I2C_SOFT_SLAVE	0xFE
 
-# define CONFIG_SYS_I2C_SPEED		50000
-# define CONFIG_SYS_I2C_SLAVE		0xFE
 /*
  * Software (bit-bang) I2C driver configuration
  */
diff --git a/include/configs/CPU87.h b/include/configs/CPU87.h
index bbd0022f74..7bbcb77af7 100644
--- a/include/configs/CPU87.h
+++ b/include/configs/CPU87.h
@@ -117,10 +117,11 @@
 /*-----------------------------------------------------------------------
  * I2C/EEPROM/RTC configuration
  */
-#define CONFIG_SOFT_I2C			/* Software I2C support enabled */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT		/* I2C bit-banged */
+#define CONFIG_SYS_I2C_SOFT_SPEED	50000
+#define CONFIG_SYS_I2C_SOFT_SLAVE	0xFE
 
-# define CONFIG_SYS_I2C_SPEED		50000
-# define CONFIG_SYS_I2C_SLAVE		0xFE
 /*
  * Software (bit-bang) I2C driver configuration
  */
diff --git a/include/configs/CRAYL1.h b/include/configs/CRAYL1.h
index a19b431882..fa3efabea4 100644
--- a/include/configs/CRAYL1.h
+++ b/include/configs/CRAYL1.h
@@ -60,11 +60,12 @@
  #define CONFIG_SERVERIP         10.0.0.1
  #define CONFIG_ETHADDR          00:40:a6:80:14:5
  */
-#define CONFIG_HARD_I2C         1		/* hardware support for i2c */
-#define CONFIG_PPC4XX_I2C		/* use PPC4xx driver		*/
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_PPC4XX
+#define CONFIG_SYS_I2C_PPC4XX_CH0
 #define CONFIG_SDRAM_BANK0		1
-#define CONFIG_SYS_I2C_SPEED		    400000	/* I2C speed and slave address	*/
-#define CONFIG_SYS_I2C_SLAVE		    0x7F
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0		    400000
+#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0		    0x7F
 #define CONFIG_SYS_I2C_EEPROM_ADDR     0x57
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
 #define CONFIG_IDENT_STRING     "Cray L1"
diff --git a/include/configs/DP405.h b/include/configs/DP405.h
index 9254796cfb..872a2b4408 100644
--- a/include/configs/DP405.h
+++ b/include/configs/DP405.h
@@ -162,10 +162,11 @@
 /*-----------------------------------------------------------------------
  * I2C EEPROM (CAT24WC16) for environment
  */
-#define CONFIG_HARD_I2C			/* I2c with hardware support */
-#define CONFIG_PPC4XX_I2C		/* use PPC4xx driver		*/
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_PPC4XX
+#define CONFIG_SYS_I2C_PPC4XX_CH0
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0		400000
+#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0		0x7F
 
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT28WC08		*/
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1	/* Bytes of address		*/
diff --git a/include/configs/DU405.h b/include/configs/DU405.h
index b6825d5ad2..5b9e0d2f41 100644
--- a/include/configs/DU405.h
+++ b/include/configs/DU405.h
@@ -181,10 +181,11 @@
 /*-----------------------------------------------------------------------
  * I2C EEPROM (CAT24WC08) for environment
  */
-#define CONFIG_HARD_I2C			/* I2c with hardware support */
-#define CONFIG_PPC4XX_I2C		/* use PPC4xx driver		*/
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_PPC4XX
+#define CONFIG_SYS_I2C_PPC4XX_CH0
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0		400000
+#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0		0x7F
 
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT28WC08		*/
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1	/* Bytes of address		*/
diff --git a/include/configs/DU440.h b/include/configs/DU440.h
index 9b338535d9..08271132dc 100644
--- a/include/configs/DU440.h
+++ b/include/configs/DU440.h
@@ -157,19 +157,20 @@
 /*
  * I2C
  */
-#define CONFIG_HARD_I2C		1	/* I2C with hardware support    */
-#undef	CONFIG_SOFT_I2C			/* I2C bit-banged	        */
-#define CONFIG_PPC4XX_I2C		/* use PPC4xx driver		*/
-#define CONFIG_SYS_I2C_SPEED		100000	/* I2C speed and slave address  */
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_I2C_MULTI_BUS    1
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_PPC4XX
+#define CONFIG_SYS_I2C_PPC4XX_CH0
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0		100000
+#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0		0x7F
+#define CONFIG_SYS_I2C_PPC4XX_CH1
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_1		100000
+#define CONFIG_SYS_I2C_PPC4XX_SLAVE_1		0x7F
 
 #define CONFIG_SYS_SPD_BUS_NUM         0
 #define IIC1_MCP3021_ADDR	0x4d
 #define IIC1_USB2507_ADDR	0x2c
-#ifdef CONFIG_I2C_MULTI_BUS
-#define CONFIG_SYS_I2C_NOPROBES        {{1, IIC1_USB2507_ADDR}}
-#endif
+#define CONFIG_SYS_I2C_NOPROBES		{ {1, IIC1_USB2507_ADDR} }
+
 #define CONFIG_SYS_I2C_MULTI_EEPROMS
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x54
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
diff --git a/include/configs/G2000.h b/include/configs/G2000.h
index 1edd6df7c3..5a74abcd41 100644
--- a/include/configs/G2000.h
+++ b/include/configs/G2000.h
@@ -282,10 +282,11 @@
 /*-----------------------------------------------------------------------
  * I2C EEPROM (CAT24WC16) for environment
  */
-#define CONFIG_HARD_I2C			/* I2c with hardware support */
-#define CONFIG_PPC4XX_I2C		/* use PPC4xx driver		*/
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_PPC4XX
+#define CONFIG_SYS_I2C_PPC4XX_CH0
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0		400000
+#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0		0x7F
 
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT24WC08		*/
 /* CAT24WC08/16... */
diff --git a/include/configs/GEN860T.h b/include/configs/GEN860T.h
index 2962c915aa..06c0e50c96 100644
--- a/include/configs/GEN860T.h
+++ b/include/configs/GEN860T.h
@@ -142,26 +142,33 @@
 /*
  * Enable I2C and select the hardware/software driver
  */
-#define CONFIG_HARD_I2C		1				/* CPM based I2C			*/
-#undef	CONFIG_SOFT_I2C						/* Bit-banged I2C			*/
+#define CONFIG_HARD_I2C		1		/* CPM based I2C */
+#undef	CONFIG_SYS_I2C_SOFT			/* Bit-banged I2C */
 
 #ifdef CONFIG_HARD_I2C
-#define	CONFIG_SYS_I2C_SPEED		100000			/* clock speed in Hz		*/
-#define CONFIG_SYS_I2C_SLAVE		0xFE			/* I2C slave address		*/
+#define	CONFIG_SYS_I2C_SPEED		100000	/* clock speed in Hz */
+#define CONFIG_SYS_I2C_SLAVE		0xFE	/* I2C slave address */
 #endif
 
-#ifdef CONFIG_SOFT_I2C
-#define PB_SCL				0x00000020		/* PB 26					*/
-#define PB_SDA				0x00000010		/* PB 27					*/
-#define I2C_INIT			(immr->im_cpm.cp_pbdir |=  PB_SCL)
-#define I2C_ACTIVE			(immr->im_cpm.cp_pbdir |=  PB_SDA)
-#define I2C_TRISTATE		(immr->im_cpm.cp_pbdir &= ~PB_SDA)
-#define I2C_READ			((immr->im_cpm.cp_pbdat & PB_SDA) != 0)
-#define I2C_SDA(bit)		if(bit) immr->im_cpm.cp_pbdat |=  PB_SDA; \
-								else    immr->im_cpm.cp_pbdat &= ~PB_SDA
-#define I2C_SCL(bit)		if(bit) immr->im_cpm.cp_pbdat |=  PB_SCL; \
-								else    immr->im_cpm.cp_pbdat &= ~PB_SCL
-#define I2C_DELAY			udelay(5)		/* 1/4 I2C clock duration	*/
+#ifdef CONFIG_SYS_I2C_SOFT
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT_SPEED	50000
+#define CONFIG_SYS_I2C_SOFT_SLAVE	0xFE
+#define PB_SCL		0x00000020		/* PB 26 */
+#define PB_SDA		0x00000010		/* PB 27 */
+#define I2C_INIT	(immr->im_cpm.cp_pbdir |=  PB_SCL)
+#define I2C_ACTIVE	(immr->im_cpm.cp_pbdir |=  PB_SDA)
+#define I2C_TRISTATE	(immr->im_cpm.cp_pbdir &= ~PB_SDA)
+#define I2C_READ	((immr->im_cpm.cp_pbdat & PB_SDA) != 0)
+#define I2C_SDA(bit)	if (bit) \
+				immr->im_cpm.cp_pbdat |=  PB_SDA; \
+			else \
+				immr->im_cpm.cp_pbdat &= ~PB_SDA
+#define I2C_SCL(bit)	if (bit) \
+				immr->im_cpm.cp_pbdat |=  PB_SCL; \
+			else \
+				immr->im_cpm.cp_pbdat &= ~PB_SCL
+#define I2C_DELAY	udelay(5) /* 1/4 I2C clock duration */
 #endif
 
 /*
diff --git a/include/configs/HH405.h b/include/configs/HH405.h
index 943d6ddd98..d20ca77870 100644
--- a/include/configs/HH405.h
+++ b/include/configs/HH405.h
@@ -318,14 +318,15 @@
 /*-----------------------------------------------------------------------
  * I2C EEPROM (CAT24WC16) for environment
  */
-#define CONFIG_HARD_I2C			/* I2c with hardware support */
-#define CONFIG_PPC4XX_I2C		/* use PPC4xx driver		*/
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_PPC4XX
+#define CONFIG_SYS_I2C_PPC4XX_CH0
 #if 0 /* test-only */
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0		400000
 #else
-#define CONFIG_SYS_I2C_SPEED		100000	/* I2C speed and slave address */
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0		100000
 #endif
-#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0		0x7F
 
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT24WC08		*/
 #define CONFIG_SYS_EEPROM_WREN         1
diff --git a/include/configs/HIDDEN_DRAGON.h b/include/configs/HIDDEN_DRAGON.h
index c1d3f10525..ddeccb0868 100644
--- a/include/configs/HIDDEN_DRAGON.h
+++ b/include/configs/HIDDEN_DRAGON.h
@@ -153,12 +153,15 @@
  * configuration items that the driver uses to drive the port pins.
  */
 #define CONFIG_HARD_I2C		1		/* To enable I2C support	*/
-#undef	CONFIG_SOFT_I2C				/* I2C bit-banged		*/
+#undef	CONFIG_SYS_I2C_SOFT			/* I2C bit-banged */
 #define CONFIG_SYS_I2C_SPEED		400000		/* I2C speed and slave address	*/
 #define CONFIG_SYS_I2C_SLAVE		0x7F
 
-#ifdef CONFIG_SOFT_I2C
+#ifdef CONFIG_SYS_I2C_SOFT
 #error "Soft I2C is not configured properly.  Please review!"
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT_SPEED	50000
+#define CONFIG_SYS_I2C_SOFT_SLAVE	0xFE
 #define I2C_PORT		3		/* Port A=0, B=1, C=2, D=3 */
 #define I2C_ACTIVE		(iop->pdir |=  0x00010000)
 #define I2C_TRISTATE		(iop->pdir &= ~0x00010000)
@@ -168,7 +171,7 @@
 #define I2C_SCL(bit)		if(bit) iop->pdat |=  0x00020000; \
 				else	iop->pdat &= ~0x00020000
 #define I2C_DELAY		udelay(5)	/* 1/4 I2C clock duration */
-#endif /* CONFIG_SOFT_I2C */
+#endif /* CONFIG_SYS_I2C_SOFT */
 
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x57		/* EEPROM IS24C02		*/
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1		/* Bytes of address		*/
diff --git a/include/configs/HUB405.h b/include/configs/HUB405.h
index 30effc3d72..cf796bf2d9 100644
--- a/include/configs/HUB405.h
+++ b/include/configs/HUB405.h
@@ -230,10 +230,11 @@
 /*-----------------------------------------------------------------------
  * I2C EEPROM (CAT24WC16) for environment
  */
-#define CONFIG_HARD_I2C			/* I2c with hardware support */
-#define CONFIG_PPC4XX_I2C		/* use PPC4xx driver		*/
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_PPC4XX
+#define CONFIG_SYS_I2C_PPC4XX_CH0
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0		400000
+#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0		0x7F
 
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT28WC08		*/
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1	/* Bytes of address		*/
diff --git a/include/configs/HWW1U1A.h b/include/configs/HWW1U1A.h
index 8c217562a1..5aaa9767e9 100644
--- a/include/configs/HWW1U1A.h
+++ b/include/configs/HWW1U1A.h
@@ -202,16 +202,16 @@
 /* -------------------------------------------------------------------- */
 
 /* Generic FreeScale hardware I2C support */
-#define CONFIG_HARD_I2C
-#define CONFIG_FSL_I2C
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+#define CONFIG_SYS_FSL_I2C2_SPEED	400000
+#define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100
+#define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x29} }
 #define CONFIG_CMD_I2C
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_SYS_I2C_OFFSET  0x3000
-#define CONFIG_SYS_I2C2_OFFSET 0x3100
-
-/* I2C bus configuration */
-#define CONFIG_SYS_I2C_SPEED 400000
-#define CONFIG_SYS_I2C_SLAVE 0x7F
 
 /* DDR2 SO-RDIMM SPD EEPROM is at I2C0-0x51 */
 #define CONFIG_SYS_SPD_BUS_NUM 0
diff --git a/include/configs/ICU862.h b/include/configs/ICU862.h
index 48a05d52ff..40d0d7cab9 100644
--- a/include/configs/ICU862.h
+++ b/include/configs/ICU862.h
@@ -90,12 +90,10 @@
 #define CONFIG_DOS_PARTITION
 
 /* enable I2C and select the hardware/software driver */
-#undef  CONFIG_HARD_I2C			/* I2C with hardware support	*/
-#define CONFIG_SOFT_I2C		1	/* I2C bit-banged		*/
-# define CONFIG_SYS_I2C_SPEED		50000
-# define CONFIG_SYS_I2C_SLAVE		0xFE
-# define CONFIG_SYS_I2C_EEPROM_ADDR	0x50
-# define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1	/* Bytes of address		*/
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT		/* I2C bit-banged */
+#define CONFIG_SYS_I2C_SOFT_SPEED	50000
+#define CONFIG_SYS_I2C_SOFT_SLAVE	0xFE
 /*
  * Software (bit-bang) I2C driver configuration
  */
@@ -117,6 +115,9 @@
 
 #define	CONFIG_RTC_MPC8xx		/* use internal RTC of MPC8xx	*/
 
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1	/* Bytes of address */
+
 
 /*
  * Command line configuration.
diff --git a/include/configs/IDS8247.h b/include/configs/IDS8247.h
index c7409debe1..590abc30df 100644
--- a/include/configs/IDS8247.h
+++ b/include/configs/IDS8247.h
@@ -57,11 +57,10 @@
 #define CONFIG_MISC_INIT_R	1
 
 /* enable I2C and select the hardware/software driver */
-#undef  CONFIG_HARD_I2C			/* I2C with hardware support	*/
-#define CONFIG_SOFT_I2C		1	/* I2C bit-banged		*/
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address	*/
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT		/* I2C bit-banged */
+#define CONFIG_SYS_I2C_SOFT_SPEED	400000
+#define CONFIG_SYS_I2C_SOFT_SLAVE	0x7F
 /*
  * Software (bit-bang) I2C driver configuration
  */
diff --git a/include/configs/IP860.h b/include/configs/IP860.h
index 1247181b54..c852ca998b 100644
--- a/include/configs/IP860.h
+++ b/include/configs/IP860.h
@@ -46,8 +46,10 @@
 
 
 /* enable I2C and select the hardware/software driver */
-#undef  CONFIG_HARD_I2C			/* I2C with hardware support	*/
-#define CONFIG_SOFT_I2C		1	/* I2C bit-banged		*/
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT		/* I2C bit-banged */
+#define CONFIG_SYS_I2C_SOFT_SPEED	50000
+#define CONFIG_SYS_I2C_SOFT_SLAVE	0xFE
 /*
  * Software (bit-bang) I2C driver configuration
  */
@@ -64,9 +66,6 @@
 			else    immr->im_cpm.cp_pbdat &= ~PB_SCL
 #define I2C_DELAY	udelay(5)	/* 1/4 I2C clock duration */
 
-
-# define CONFIG_SYS_I2C_SPEED		50000
-# define CONFIG_SYS_I2C_SLAVE		0xFE
 # define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* EEPROM X24C16		*/
 # define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1	/* bytes of address		*/
 /* mask of address bits that overflow into the "EEPROM chip address"    */
diff --git a/include/configs/IPHASE4539.h b/include/configs/IPHASE4539.h
index bcc007c4d2..cbc8b5bbc1 100644
--- a/include/configs/IPHASE4539.h
+++ b/include/configs/IPHASE4539.h
@@ -94,15 +94,13 @@
  * If the software driver is chosen, there are some additional
  * configuration items that the driver uses to drive the port pins.
  */
-#undef  CONFIG_HARD_I2C			/* I2C with hardware support	*/
-#define CONFIG_SOFT_I2C		1	/* I2C bit-banged		*/
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address	*/
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT		/* I2C bit-banged */
+#define CONFIG_SYS_I2C_SOFT_SPEED	400000
+#define CONFIG_SYS_I2C_SOFT_SLAVE	0x7F
 /*
  * Software (bit-bang) I2C driver configuration
  */
-#ifdef CONFIG_SOFT_I2C
 #define I2C_PORT	3		/* Port A=0, B=1, C=2, D=3 */
 #define I2C_ACTIVE	(iop->pdir |=  0x00010000)
 #define I2C_TRISTATE	(iop->pdir &= ~0x00010000)
@@ -112,7 +110,6 @@
 #define I2C_SCL(bit)	if(bit) iop->pdat |=  0x00020000; \
 			else    iop->pdat &= ~0x00020000
 #define I2C_DELAY	udelay(5)	/* 1/4 I2C clock duration */
-#endif /* CONFIG_SOFT_I2C */
 
 
 /*
diff --git a/include/configs/JSE.h b/include/configs/JSE.h
index c855c7f02f..6439d99bf8 100644
--- a/include/configs/JSE.h
+++ b/include/configs/JSE.h
@@ -194,11 +194,11 @@
 
 #define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
 
-#define CONFIG_HARD_I2C		1	/* I2C with hardware support	*/
-#undef	CONFIG_SOFT_I2C			/* I2C bit-banged		*/
-#define CONFIG_PPC4XX_I2C		/* use PPC4xx driver		*/
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address	*/
-#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_PPC4XX
+#define CONFIG_SYS_I2C_PPC4XX_CH0
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0		400000
+#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0		0x7F
 
 
 /*-----------------------------------------------------------------------
diff --git a/include/configs/KAREF.h b/include/configs/KAREF.h
index d7377a8e91..2cbb6eeb9c 100644
--- a/include/configs/KAREF.h
+++ b/include/configs/KAREF.h
@@ -117,14 +117,15 @@
 /*-----------------------------------------------------------------------
  * I2C
  *----------------------------------------------------------------------*/
-#define CONFIG_HARD_I2C	      1		     /* I2C hardware support	*/
-#undef	CONFIG_SOFT_I2C			     /* I2C !bit-banged		*/
-#define CONFIG_PPC4XX_I2C		/* use PPC4xx driver		*/
-#define CONFIG_SYS_I2C_SPEED	      400000	     /* I2C speed 400kHz	*/
-#define CONFIG_SYS_I2C_SLAVE	      0x7F	     /* I2C slave address	*/
-#define CONFIG_SYS_I2C_NOPROBES      {0x69}	     /* Don't probe these addrs */
-#define CONFIG_I2C_BUS1	      1		     /* Include i2c bus 1 supp	*/
-
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_PPC4XX
+#define CONFIG_SYS_I2C_PPC4XX_CH0
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000
+#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F
+#define CONFIG_SYS_I2C_PPC4XX_CH1
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_1 400000 /* I2C speed 400kHz */
+#define CONFIG_SYS_I2C_PPC4XX_SLAVE_1 0x7F
+#define CONFIG_SYS_I2C_NOPROBES { { 0, 0x69} } /* Don't probe these addrs */
 
 /*-----------------------------------------------------------------------
  * Environment
diff --git a/include/configs/KUP4K.h b/include/configs/KUP4K.h
index 68451baf75..ef51e35df6 100644
--- a/include/configs/KUP4K.h
+++ b/include/configs/KUP4K.h
@@ -90,13 +90,11 @@
 /*
  * enable I2C and select the hardware/software driver
  */
-#undef	CONFIG_HARD_I2C		/* I2C with hardware support	*/
-#define	CONFIG_SOFT_I2C		/* I2C bit-banged		*/
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT		/* I2C bit-banged */
+#define CONFIG_SYS_I2C_SOFT_SPEED	93000	/* 93 kHz is supposed to work */
+#define CONFIG_SYS_I2C_SOFT_SLAVE	0xFE
 
-#define CONFIG_SYS_I2C_SPEED	93000	/* 93 kHz is supposed to work */
-#define CONFIG_SYS_I2C_SLAVE	0xFE
-
-#ifdef CONFIG_SOFT_I2C
 /*
  * Software (bit-bang) I2C driver configuration
  */
@@ -112,7 +110,6 @@
 #define I2C_SCL(bit)	if(bit) immr->im_cpm.cp_pbdat |=  PB_SCL; \
 			else    immr->im_cpm.cp_pbdat &= ~PB_SCL
 #define I2C_DELAY	udelay(2)	/* 1/4 I2C clock duration */
-#endif	/* CONFIG_SOFT_I2C */
 
 /*-----------------------------------------------------------------------
  * I2C Configuration
diff --git a/include/configs/KUP4X.h b/include/configs/KUP4X.h
index 8af1269a45..6da07e7d06 100644
--- a/include/configs/KUP4X.h
+++ b/include/configs/KUP4X.h
@@ -98,13 +98,13 @@
 /*
  * enable I2C and select the hardware/software driver
  */
-#undef	CONFIG_HARD_I2C			/* I2C with hardware support	*/
-#define	CONFIG_SOFT_I2C         1	/* I2C bit-banged		*/
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT		/* I2C bit-banged */
 
-#define CONFIG_SYS_I2C_SPEED		93000	/* 93 kHz is supposed to work	*/
-#define CONFIG_SYS_I2C_SLAVE		0xFE
+#ifdef CONFIG_SYS_I2C_SOFT
+#define CONFIG_SYS_I2C_SOFT_SPEED	93000	/* 93 kHz is supposed to work */
+#define CONFIG_SYS_I2C_SOFT_SLAVE	0xFE
 
-#ifdef CONFIG_SOFT_I2C
 /*
  * Software (bit-bang) I2C driver configuration
  */
@@ -120,7 +120,7 @@
 #define I2C_SCL(bit)	if(bit) immr->im_cpm.cp_pbdat |=  PB_SCL; \
 			else    immr->im_cpm.cp_pbdat &= ~PB_SCL
 #define I2C_DELAY	udelay(2)	/* 1/4 I2C clock duration */
-#endif	/* CONFIG_SOFT_I2C */
+#endif	/* CONFIG_SYS_I2C_SOFT */
 
 
 /*-----------------------------------------------------------------------
diff --git a/include/configs/M5208EVBE.h b/include/configs/M5208EVBE.h
index df9ba5ea3c..fe901ce6c2 100644
--- a/include/configs/M5208EVBE.h
+++ b/include/configs/M5208EVBE.h
@@ -66,12 +66,11 @@
 #undef CONFIG_MCFPIT
 
 /* I2C */
-#define CONFIG_FSL_I2C
-#define CONFIG_HARD_I2C			/* I2C with hw support */
-#undef CONFIG_SOFT_I2C			/* I2C bit-banged */
-#define CONFIG_SYS_I2C_SPEED		80000
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_OFFSET		0x58000
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	80000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x58000
 #define CONFIG_SYS_IMMR			CONFIG_SYS_MBAR
 
 #define CONFIG_BOOTDELAY		1	/* autoboot after 5 seconds */
diff --git a/include/configs/M52277EVB.h b/include/configs/M52277EVB.h
index 4acac6c442..1d10f7f2a0 100644
--- a/include/configs/M52277EVB.h
+++ b/include/configs/M52277EVB.h
@@ -129,12 +129,11 @@
 #undef CONFIG_MCFPIT
 
 /* I2c */
-#define CONFIG_FSL_I2C
-#define CONFIG_HARD_I2C		/* I2C with hardware support */
-#undef	CONFIG_SOFT_I2C		/* I2C bit-banged               */
-#define CONFIG_SYS_I2C_SPEED		80000	/* I2C speed and slave address  */
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_OFFSET		0x58000
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	80000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x58000
 #define CONFIG_SYS_IMMR			CONFIG_SYS_MBAR
 
 /* DSPI and Serial Flash */
diff --git a/include/configs/M5235EVB.h b/include/configs/M5235EVB.h
index 1b80f82934..aaaaa41a15 100644
--- a/include/configs/M5235EVB.h
+++ b/include/configs/M5235EVB.h
@@ -83,12 +83,11 @@
 #undef CONFIG_MCFPIT
 
 /* I2C */
-#define CONFIG_FSL_I2C
-#define CONFIG_HARD_I2C		/* I2C with hw support */
-#undef CONFIG_SOFT_I2C		/* I2C bit-banged */
-#define CONFIG_SYS_I2C_SPEED		80000
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_OFFSET		0x00000300
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_i2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	80000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x00000300
 #define CONFIG_SYS_IMMR		CONFIG_SYS_MBAR
 #define CONFIG_SYS_I2C_PINMUX_REG	(gpio->par_qspi)
 #define CONFIG_SYS_I2C_PINMUX_CLR	~(GPIO_PAR_FECI2C_SCL_MASK | GPIO_PAR_FECI2C_SDA_MASK)
diff --git a/include/configs/M5253DEMO.h b/include/configs/M5253DEMO.h
index bf37fdf14b..83122cf59f 100644
--- a/include/configs/M5253DEMO.h
+++ b/include/configs/M5253DEMO.h
@@ -97,11 +97,11 @@ TABILITY or FITNESS FO04-2007 Freescale Semiconductor, Inc.
 #define CONFIG_HOSTNAME		M5253DEMO
 
 /* I2C */
-#define CONFIG_FSL_I2C
-#define CONFIG_HARD_I2C		/* I2C with hw support */
-#define CONFIG_SYS_I2C_SPEED		80000
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_OFFSET		0x00000280
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	80000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x00000280
 #define CONFIG_SYS_IMMR		CONFIG_SYS_MBAR
 #define CONFIG_SYS_I2C_PINMUX_REG	(*(u32 *) (CONFIG_SYS_MBAR+0x19C))
 #define CONFIG_SYS_I2C_PINMUX_CLR	(0xFFFFE7FF)
diff --git a/include/configs/M5271EVB.h b/include/configs/M5271EVB.h
index fa43231c49..a77cb24975 100644
--- a/include/configs/M5271EVB.h
+++ b/include/configs/M5271EVB.h
@@ -93,12 +93,11 @@
 #endif
 
 /* I2C */
-#define CONFIG_FSL_I2C
-#define CONFIG_HARD_I2C		/* I2C with hw support */
-#undef CONFIG_SOFT_I2C		/* I2C bit-banged */
-#define CONFIG_SYS_I2C_SPEED		80000
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_OFFSET		0x00000300
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	80000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x00000300
 #define CONFIG_SYS_IMMR		CONFIG_SYS_MBAR
 
 #define CONFIG_BOOTDELAY	1	/* autoboot after 1 seconds */
diff --git a/include/configs/M5275EVB.h b/include/configs/M5275EVB.h
index 2b99ee9f1c..bacee0a8fa 100644
--- a/include/configs/M5275EVB.h
+++ b/include/configs/M5275EVB.h
@@ -93,12 +93,11 @@
 #endif
 
 /* I2C */
-#define CONFIG_FSL_I2C
-#define CONFIG_HARD_I2C		/* I2C with hw support */
-#undef CONFIG_SOFT_I2C
-#define CONFIG_SYS_I2C_SPEED		80000
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_OFFSET		0x00000300
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	80000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x00000300
 #define CONFIG_SYS_IMMR		CONFIG_SYS_MBAR
 #define CONFIG_SYS_I2C_PINMUX_REG	(gpio_reg->par_feci2c)
 #define CONFIG_SYS_I2C_PINMUX_CLR	(0xFFF0)
diff --git a/include/configs/M53017EVB.h b/include/configs/M53017EVB.h
index a98ded2570..0ced196489 100644
--- a/include/configs/M53017EVB.h
+++ b/include/configs/M53017EVB.h
@@ -85,12 +85,11 @@
 #undef CONFIG_MCFPIT
 
 /* I2C */
-#define CONFIG_FSL_I2C
-#define CONFIG_HARD_I2C			/* I2C with hw support */
-#undef CONFIG_SOFT_I2C			/* I2C bit-banged */
-#define CONFIG_SYS_I2C_SPEED		80000
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_OFFSET		0x58000
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	80000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x58000
 #define CONFIG_SYS_IMMR			CONFIG_SYS_MBAR
 
 #define CONFIG_BOOTDELAY		1	/* autoboot after 5 seconds */
diff --git a/include/configs/M5329EVB.h b/include/configs/M5329EVB.h
index d5d3bc48cd..86b06f4f16 100644
--- a/include/configs/M5329EVB.h
+++ b/include/configs/M5329EVB.h
@@ -79,12 +79,11 @@
 #undef CONFIG_MCFPIT
 
 /* I2C */
-#define CONFIG_FSL_I2C
-#define CONFIG_HARD_I2C			/* I2C with hw support */
-#undef CONFIG_SOFT_I2C			/* I2C bit-banged */
-#define CONFIG_SYS_I2C_SPEED		80000
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_OFFSET		0x58000
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	80000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x58000
 #define CONFIG_SYS_IMMR		CONFIG_SYS_MBAR
 
 #define CONFIG_BOOTDELAY	1	/* autoboot after 5 seconds */
diff --git a/include/configs/M5373EVB.h b/include/configs/M5373EVB.h
index 8657382c8e..cca76097dc 100644
--- a/include/configs/M5373EVB.h
+++ b/include/configs/M5373EVB.h
@@ -79,12 +79,11 @@
 #undef CONFIG_MCFPIT
 
 /* I2C */
-#define CONFIG_FSL_I2C
-#define CONFIG_HARD_I2C		/* I2C with hw support */
-#undef CONFIG_SOFT_I2C		/* I2C bit-banged */
-#define CONFIG_SYS_I2C_SPEED		80000
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_OFFSET		0x58000
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	80000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x58000
 #define CONFIG_SYS_IMMR		CONFIG_SYS_MBAR
 
 #define CONFIG_BOOTDELAY	1	/* autoboot after 5 seconds */
diff --git a/include/configs/M54418TWR.h b/include/configs/M54418TWR.h
index aa95de2a67..bc264276d4 100644
--- a/include/configs/M54418TWR.h
+++ b/include/configs/M54418TWR.h
@@ -197,9 +197,9 @@
 #undef CONFIG_MCFPIT
 
 /* I2c */
-#undef CONFIG_FSL_I2C
+#undef CONFIG_SYS_FSL_I2C
 #undef CONFIG_HARD_I2C		/* I2C with hardware support */
-#undef	CONFIG_SOFT_I2C		/* I2C bit-banged */
+#undef	CONFIG_SYS_I2C_SOFT	/* I2C bit-banged */
 /* I2C speed and slave address  */
 #define CONFIG_SYS_I2C_SPEED		80000
 #define CONFIG_SYS_I2C_SLAVE		0x7F
diff --git a/include/configs/M54451EVB.h b/include/configs/M54451EVB.h
index 720e888f6f..72ad8366fb 100644
--- a/include/configs/M54451EVB.h
+++ b/include/configs/M54451EVB.h
@@ -140,12 +140,11 @@
 #undef CONFIG_MCFPIT
 
 /* I2c */
-#define CONFIG_FSL_I2C
-#define CONFIG_HARD_I2C		/* I2C with hardware support */
-#undef	CONFIG_SOFT_I2C		/* I2C bit-banged               */
-#define CONFIG_SYS_I2C_SPEED		80000	/* I2C speed and slave address  */
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_OFFSET		0x58000
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	80000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x58000
 #define CONFIG_SYS_IMMR			CONFIG_SYS_MBAR
 
 /* DSPI and Serial Flash */
diff --git a/include/configs/M54455EVB.h b/include/configs/M54455EVB.h
index 03dafd5440..3dc87d6f61 100644
--- a/include/configs/M54455EVB.h
+++ b/include/configs/M54455EVB.h
@@ -173,12 +173,11 @@
 #undef CONFIG_MCFPIT
 
 /* I2c */
-#define CONFIG_FSL_I2C
-#define CONFIG_HARD_I2C		/* I2C with hardware support */
-#undef	CONFIG_SOFT_I2C		/* I2C bit-banged               */
-#define CONFIG_SYS_I2C_SPEED		80000	/* I2C speed and slave address  */
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_OFFSET		0x58000
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	80000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSLI2C_OFFSET	0x58000
 #define CONFIG_SYS_IMMR		CONFIG_SYS_MBAR
 
 /* DSPI and Serial Flash */
diff --git a/include/configs/M5475EVB.h b/include/configs/M5475EVB.h
index b5bf1c7f99..dc38219c1d 100644
--- a/include/configs/M5475EVB.h
+++ b/include/configs/M5475EVB.h
@@ -104,12 +104,11 @@
 #endif
 
 /* I2C */
-#define CONFIG_FSL_I2C
-#define CONFIG_HARD_I2C		/* I2C with hw support */
-#undef CONFIG_SOFT_I2C		/* I2C bit-banged */
-#define CONFIG_SYS_I2C_SPEED		80000
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_OFFSET		0x00008F00
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	80000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x00008F00
 #define CONFIG_SYS_IMMR		CONFIG_SYS_MBAR
 
 /* PCI */
diff --git a/include/configs/M5485EVB.h b/include/configs/M5485EVB.h
index 3924936a5a..0307f19ad2 100644
--- a/include/configs/M5485EVB.h
+++ b/include/configs/M5485EVB.h
@@ -101,12 +101,11 @@
 #endif
 
 /* I2C */
-#define CONFIG_FSL_I2C
-#define CONFIG_HARD_I2C		/* I2C with hw support */
-#undef CONFIG_SOFT_I2C		/* I2C bit-banged */
-#define CONFIG_SYS_I2C_SPEED		80000
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_OFFSET		0x00008F00
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	80000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x00008F00
 #define CONFIG_SYS_IMMR		CONFIG_SYS_MBAR
 
 /* PCI */
diff --git a/include/configs/MERGERBOX.h b/include/configs/MERGERBOX.h
index 6119159e4a..ad9c77e1c8 100644
--- a/include/configs/MERGERBOX.h
+++ b/include/configs/MERGERBOX.h
@@ -211,13 +211,14 @@
 #define CONFIG_OF_STDOUT_VIA_ALIAS 1
 
 /* I2C */
-#define CONFIG_HARD_I2C
-#define CONFIG_FSL_I2C
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_SYS_I2C_SPEED		120000
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_OFFSET		0x3000
-#define CONFIG_SYS_I2C2_OFFSET		0x3100
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+#define CONFIG_SYS_FSL_I2C2_SPEED	400000
+#define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100
 
 /*
  * General PCI
diff --git a/include/configs/METROBOX.h b/include/configs/METROBOX.h
index b98a4c481e..1e50032414 100644
--- a/include/configs/METROBOX.h
+++ b/include/configs/METROBOX.h
@@ -179,14 +179,15 @@
 /*-----------------------------------------------------------------------
  * I2C
  *----------------------------------------------------------------------*/
-#define CONFIG_HARD_I2C	      1		     /* I2C hardware support	*/
-#undef	CONFIG_SOFT_I2C			     /* I2C !bit-banged		*/
-#define CONFIG_PPC4XX_I2C		/* use PPC4xx driver		*/
-#define CONFIG_SYS_I2C_SPEED	      400000	     /* I2C speed 400kHz	*/
-#define CONFIG_SYS_I2C_SLAVE	      0x7F	     /* I2C slave address	*/
-#define CONFIG_SYS_I2C_NOPROBES      {0x69}	     /* Don't probe these addrs */
-#define CONFIG_I2C_BUS1	      1		     /* Include i2c bus 1 supp	*/
-
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_PPC4XX
+#define CONFIG_SYS_I2C_PPC4XX_CH0
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000
+#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F
+#define CONFIG_SYS_I2C_PPC4XX_CH1
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_1 400000 /* I2C speed 400kHz */
+#define CONFIG_SYS_I2C_PPC4XX_SLAVE_1 0x7F
+#define CONFIG_SYS_I2C_NOPROBES { { 0, 0x69} } /* Don't probe these addrs */
 
 /*-----------------------------------------------------------------------
  * Environment
diff --git a/include/configs/MHPC.h b/include/configs/MHPC.h
index 65efe78f33..75eef20e58 100644
--- a/include/configs/MHPC.h
+++ b/include/configs/MHPC.h
@@ -57,8 +57,10 @@
 #undef	CONFIG_UCODE_PATCH
 
 /* enable I2C and select the hardware/software driver */
-#undef	CONFIG_HARD_I2C			/* I2C with hardware support	*/
-#define CONFIG_SOFT_I2C		1	/* I2C bit-banged		*/
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT		/* I2C bit-banged */
+#define CONFIG_SYS_I2C_SOFT_SPEED	50000
+#define CONFIG_SYS_I2C_SOFT_SLAVE	0xFE
 /*
  * Software (bit-bang) I2C driver configuration
  */
@@ -75,8 +77,6 @@
 			else	immr->im_cpm.cp_pbdat &= ~PB_SCL
 #define I2C_DELAY	udelay(5)	/* 1/4 I2C clock duration */
 
-#define CONFIG_SYS_I2C_SPEED			50000
-#define CONFIG_SYS_I2C_SLAVE			0xFE
 #define CONFIG_SYS_I2C_EEPROM_ADDR		0x50	/* EEPROM X24C04		*/
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1	/* bytes of address		*/
 /* mask of address bits that overflow into the "EEPROM chip address"	*/
diff --git a/include/configs/MIP405.h b/include/configs/MIP405.h
index 9185e77ad1..c535dbeaae 100644
--- a/include/configs/MIP405.h
+++ b/include/configs/MIP405.h
@@ -82,10 +82,11 @@
  * The Atmel EEPROM uses 16Bit addressing.
  ***************************************************************/
 
-#define CONFIG_HARD_I2C			/* I2c with hardware support */
-#define CONFIG_PPC4XX_I2C		/* use PPC4xx driver		*/
-#define CONFIG_SYS_I2C_SPEED		50000	/* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_PPC4XX
+#define CONFIG_SYS_I2C_PPC4XX_CH0
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0		50000
+#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0		0x7F
 
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x53	/* EEPROM 24C128/256		*/
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	2	/* Bytes of address		*/
diff --git a/include/configs/MPC8308RDB.h b/include/configs/MPC8308RDB.h
index 09961a4eb8..d315729b8b 100644
--- a/include/configs/MPC8308RDB.h
+++ b/include/configs/MPC8308RDB.h
@@ -334,14 +334,15 @@
 #define CONFIG_OF_STDOUT_VIA_ALIAS	1
 
 /* I2C */
-#define CONFIG_HARD_I2C		/* I2C with hardware support */
-#define CONFIG_FSL_I2C
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_SYS_I2C_SPEED	400000 /* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE	0x7F
-#define CONFIG_SYS_I2C_NOPROBES	{ {0, 0x51} } /* Don't probe these addrs */
-#define CONFIG_SYS_I2C_OFFSET	0x3000
-#define CONFIG_SYS_I2C2_OFFSET	0x3100
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+#define CONFIG_SYS_FSL_I2C2_SPEED	400000
+#define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100
+#define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x51} }
 
 /*
  * SPI on header J8
diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h
index 6740182045..6c6ce58fb8 100644
--- a/include/configs/MPC8313ERDB.h
+++ b/include/configs/MPC8313ERDB.h
@@ -387,14 +387,15 @@
 #define CONFIG_SYS_HUSH_PARSER
 
 /* I2C */
-#define CONFIG_HARD_I2C			/* I2C with hardware support*/
-#define CONFIG_FSL_I2C
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_SYS_I2C_SPEED	400000	/* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE	0x7F
-#define CONFIG_SYS_I2C_NOPROBES	{ {0, 0x69} } /* Don't probe these addrs */
-#define CONFIG_SYS_I2C_OFFSET	0x3000
-#define CONFIG_SYS_I2C2_OFFSET	0x3100
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+#define CONFIG_SYS_FSL_I2C2_SPEED	400000
+#define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100
+#define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x69} }
 
 /*
  * General PCI
diff --git a/include/configs/MPC8315ERDB.h b/include/configs/MPC8315ERDB.h
index 882ae73e05..fef19d4b5f 100644
--- a/include/configs/MPC8315ERDB.h
+++ b/include/configs/MPC8315ERDB.h
@@ -331,13 +331,12 @@
 #define CONFIG_OF_STDOUT_VIA_ALIAS	1
 
 /* I2C */
-#define CONFIG_HARD_I2C		/* I2C with hardware support */
-#define CONFIG_FSL_I2C
-#define CONFIG_SYS_I2C_SPEED		400000 /* I2C speed and slave addr */
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_NOPROBES		{0x51} /* Don't probe these addrs */
-#define CONFIG_SYS_I2C_OFFSET		0x3000
-#define CONFIG_SYS_I2C2_OFFSET		0x3100
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+#define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x51} }
 
 /*
  * Board info - revision and where boot from
diff --git a/include/configs/MPC8323ERDB.h b/include/configs/MPC8323ERDB.h
index ac4c253968..d5db65df11 100644
--- a/include/configs/MPC8323ERDB.h
+++ b/include/configs/MPC8323ERDB.h
@@ -233,13 +233,12 @@
 #define CONFIG_OF_STDOUT_VIA_ALIAS	1
 
 /* I2C */
-#define CONFIG_HARD_I2C		/* I2C with hardware support */
-#undef CONFIG_SOFT_I2C		/* I2C bit-banged */
-#define CONFIG_FSL_I2C
-#define CONFIG_SYS_I2C_SPEED	400000	/* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE	0x7F
-#define CONFIG_SYS_I2C_NOPROBES	{0x51}	/* Don't probe these addrs */
-#define CONFIG_SYS_I2C_OFFSET	0x3000
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+#define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x51} }
 
 /*
  * Config on-board EEPROM
diff --git a/include/configs/MPC832XEMDS.h b/include/configs/MPC832XEMDS.h
index fa8e75250a..32e05af8ab 100644
--- a/include/configs/MPC832XEMDS.h
+++ b/include/configs/MPC832XEMDS.h
@@ -313,13 +313,12 @@
 #define CONFIG_OF_STDOUT_VIA_ALIAS	1
 
 /* I2C */
-#define CONFIG_HARD_I2C		/* I2C with hardware support */
-#undef CONFIG_SOFT_I2C		/* I2C bit-banged */
-#define CONFIG_FSL_I2C
-#define CONFIG_SYS_I2C_SPEED	400000	/* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE	0x7F
-#define CONFIG_SYS_I2C_NOPROBES	{0x51}	/* Don't probe these addrs */
-#define CONFIG_SYS_I2C_OFFSET	0x3000
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+#define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x51} }
 
 /*
  * Config on-board RTC
diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h
index 9ec2f71921..432db72daa 100644
--- a/include/configs/MPC8349EMDS.h
+++ b/include/configs/MPC8349EMDS.h
@@ -338,15 +338,15 @@
 #define CONFIG_OF_STDOUT_VIA_ALIAS	1
 
 /* I2C */
-#define CONFIG_HARD_I2C		/* I2C with hardware support*/
-#undef CONFIG_SOFT_I2C		/* I2C bit-banged */
-#define CONFIG_FSL_I2C
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_SYS_I2C_SPEED	400000	/* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE	0x7F
-#define CONFIG_SYS_I2C_NOPROBES	{ {0, 0x69} }	/* Don't probe these addrs */
-#define CONFIG_SYS_I2C_OFFSET	0x3000
-#define CONFIG_SYS_I2C2_OFFSET	0x3100
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+#define CONFIG_SYS_FSL_I2C2_SPEED	400000
+#define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100
+#define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x69} }
 
 /* SPI */
 #define CONFIG_MPC8XXX_SPI
diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h
index f9949a8000..c3a577f40a 100644
--- a/include/configs/MPC8349ITX.h
+++ b/include/configs/MPC8349ITX.h
@@ -74,7 +74,7 @@
 
 #define CONFIG_PCI
 #define CONFIG_RTC_DS1337
-#define CONFIG_HARD_I2C
+#define CONFIG_SYS_I2C
 #define CONFIG_TSEC_ENET		/* TSEC Ethernet support */
 
 /*
@@ -82,12 +82,15 @@
  */
 
 /* I2C */
-#ifdef CONFIG_HARD_I2C
+#ifdef CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+#define CONFIG_SYS_FSL_I2C2_SPEED	400000
+#define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100
 
-#define CONFIG_FSL_I2C
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_SYS_I2C_OFFSET		0x3000
-#define CONFIG_SYS_I2C2_OFFSET		0x3100
 #define CONFIG_SYS_SPD_BUS_NUM		1	/* The I2C bus for SPD */
 #define CONFIG_SYS_RTC_BUS_NUM		1	/* The I2C bus for RTC */
 
@@ -99,9 +102,6 @@
 #define CONFIG_SYS_I2C_RTC_ADDR		0x68	/* I2C1, DS1339 RTC*/
 #define SPD_EEPROM_ADDRESS		0x51	/* I2C1, DDR */
 
-#define CONFIG_SYS_I2C_SPEED	400000	/* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE	0x7F
-
 /* Don't probe these addresses: */
 #define CONFIG_SYS_I2C_NOPROBES	{ {1, CONFIG_SYS_I2C_8574_ADDR1}, \
 				 {1, CONFIG_SYS_I2C_8574_ADDR2}, \
@@ -115,8 +115,6 @@
 #define I2C_8574_PCI66		0x20	/* 0=33MHz PCI, 1=66MHz PCI */
 #define I2C_8574_FLASHSIDE	0x40	/* 0=Reset vector from U4, 1=from U7*/
 
-#undef CONFIG_SOFT_I2C
-
 #endif
 
 /* Compact Flash */
@@ -183,7 +181,7 @@
 #define CONFIG_VERY_BIG_RAM
 #define CONFIG_MAX_MEM_MAPPED   ((phys_size_t)256 << 20)
 
-#ifdef CONFIG_HARD_I2C
+#ifdef CONFIG_SYS_I2C
 #define CONFIG_SPD_EEPROM		/* use SPD EEPROM for DDR setup*/
 #endif
 
@@ -529,7 +527,7 @@ boards, we say we have two, but don't display a message if we find only one. */
 	#define CONFIG_CMD_PCI
 #endif
 
-#ifdef CONFIG_HARD_I2C
+#ifdef CONFIG_SYS_I2C
 	#define CONFIG_CMD_I2C
 #endif
 
diff --git a/include/configs/MPC8360EMDS.h b/include/configs/MPC8360EMDS.h
index dfd2a50c6d..7c4f3ef8f1 100644
--- a/include/configs/MPC8360EMDS.h
+++ b/include/configs/MPC8360EMDS.h
@@ -410,14 +410,12 @@
 #define CONFIG_OF_STDOUT_VIA_ALIAS	1
 
 /* I2C */
-#define CONFIG_HARD_I2C		/* I2C with hardware support */
-#undef	CONFIG_SOFT_I2C		/* I2C bit-banged */
-#define CONFIG_FSL_I2C
-#define CONFIG_SYS_I2C_SPEED	400000	/* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE	0x7F
-#define CONFIG_SYS_I2C_NOPROBES	{0x52} /* Don't probe these addrs */
-#define CONFIG_SYS_I2C_OFFSET	0x3000
-#define CONFIG_SYS_I2C2_OFFSET 0x3100
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+#define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x52} }
 
 /*
  * Config on-board RTC
diff --git a/include/configs/MPC8360ERDK.h b/include/configs/MPC8360ERDK.h
index 2c194087a4..1973447a23 100644
--- a/include/configs/MPC8360ERDK.h
+++ b/include/configs/MPC8360ERDK.h
@@ -284,15 +284,15 @@
 #define CONFIG_OF_STDOUT_VIA_ALIAS
 
 /* I2C */
-#define CONFIG_HARD_I2C		/* I2C with hardware support */
-#undef	CONFIG_SOFT_I2C		/* I2C bit-banged */
-#define CONFIG_FSL_I2C
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_SYS_I2C_SPEED	400000	/* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE	0x7F
-#define CONFIG_SYS_I2C_NOPROBES	{ {0, 0x52} } /* Don't probe these addrs */
-#define CONFIG_SYS_I2C_OFFSET	0x3000
-#define CONFIG_SYS_I2C2_OFFSET	0x3100
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+#define CONFIG_SYS_FSL_I2C2_SPEED	400000
+#define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100
+#define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x52} }
 
 /*
  * General PCI
diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h
index ab61d214d3..51688a76bf 100644
--- a/include/configs/MPC837XEMDS.h
+++ b/include/configs/MPC837XEMDS.h
@@ -328,14 +328,12 @@
 #define CONFIG_OF_STDOUT_VIA_ALIAS	1
 
 /* I2C */
-#define CONFIG_HARD_I2C		/* I2C with hardware support */
-#undef CONFIG_SOFT_I2C		/* I2C bit-banged */
-#define CONFIG_FSL_I2C
-#define CONFIG_SYS_I2C_SPEED	400000 /* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE	0x7F
-#define CONFIG_SYS_I2C_NOPROBES	{0x51} /* Don't probe these addrs */
-#define CONFIG_SYS_I2C_OFFSET	0x3000
-#define CONFIG_SYS_I2C2_OFFSET	0x3100
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+#define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x51} }
 
 /*
  * Config on-board RTC
diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h
index 1529a090ed..a5fe220b14 100644
--- a/include/configs/MPC837XERDB.h
+++ b/include/configs/MPC837XERDB.h
@@ -354,14 +354,12 @@
 #define CONFIG_OF_STDOUT_VIA_ALIAS 1
 
 /* I2C */
-#define CONFIG_HARD_I2C		/* I2C with hardware support */
-#undef	CONFIG_SOFT_I2C		/* I2C bit-banged */
-#define CONFIG_FSL_I2C
-#define CONFIG_SYS_I2C_SPEED	400000 /* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE	0x7F
-#define CONFIG_SYS_I2C_NOPROBES	{0x51} /* Don't probe these addrs */
-#define CONFIG_SYS_I2C_OFFSET	0x3000
-#define CONFIG_SYS_I2C2_OFFSET	0x3100
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+#define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x51} }
 
 /*
  * Config on-board RTC
diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h
index 5349857ebb..8ff2c3a4fa 100644
--- a/include/configs/MPC8536DS.h
+++ b/include/configs/MPC8536DS.h
@@ -418,15 +418,15 @@
 /*
  * I2C
  */
-#define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
-#define CONFIG_HARD_I2C		/* I2C with hardware support */
-#undef	CONFIG_SOFT_I2C		/* I2C bit-banged */
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_NOPROBES	{{0, 0x29}}	/* Don't probe these addrs */
-#define CONFIG_SYS_I2C_OFFSET		0x3000
-#define CONFIG_SYS_I2C2_OFFSET		0x3100
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+#define CONFIG_SYS_FSL_I2C2_SPEED	400000
+#define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100
+#define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x29} }
 
 /*
  * I2C2 EEPROM
diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h
index c80b6b2fdb..acd37a01aa 100644
--- a/include/configs/MPC8540ADS.h
+++ b/include/configs/MPC8540ADS.h
@@ -244,13 +244,12 @@
 /*
  * I2C
  */
-#define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
-#define CONFIG_HARD_I2C		/* I2C with hardware support*/
-#undef	CONFIG_SOFT_I2C			/* I2C bit-banged */
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_NOPROBES        {0x69}	/* Don't probe these addrs */
-#define CONFIG_SYS_I2C_OFFSET		0x3000
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+#define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x69} }
 
 /* RapidIO MMU */
 #define CONFIG_SYS_RIO_MEM_VIRT	0xc0000000	/* base address */
diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h
index da7a3cbb46..61775d2c28 100644
--- a/include/configs/MPC8541CDS.h
+++ b/include/configs/MPC8541CDS.h
@@ -267,13 +267,12 @@ extern unsigned long get_clock_freq(void);
 /*
  * I2C
  */
-#define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
-#define CONFIG_HARD_I2C		/* I2C with hardware support*/
-#undef	CONFIG_SOFT_I2C			/* I2C bit-banged */
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_NOPROBES        {0x69}	/* Don't probe these addrs */
-#define CONFIG_SYS_I2C_OFFSET		0x3000
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+#define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x69} }
 
 /* EEPROM */
 #define CONFIG_ID_EEPROM
diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h
index ef8bf97f62..2a5e5d4ed9 100644
--- a/include/configs/MPC8544DS.h
+++ b/include/configs/MPC8544DS.h
@@ -216,14 +216,13 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_OF_STDOUT_VIA_ALIAS	1
 
 /* I2C */
-#define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
-#define CONFIG_HARD_I2C		/* I2C with hardware support */
-#undef	CONFIG_SOFT_I2C		/* I2C bit-banged */
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+#define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x69} }
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x57
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_NOPROBES	{0x69}	/* Don't probe these addrs */
-#define CONFIG_SYS_I2C_OFFSET		0x3100
 
 /*
  * General PCI
diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h
index 84bd3af1af..8deb241c39 100644
--- a/include/configs/MPC8548CDS.h
+++ b/include/configs/MPC8548CDS.h
@@ -342,13 +342,12 @@ extern unsigned long get_clock_freq(void);
 /*
  * I2C
  */
-#define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
-#define CONFIG_HARD_I2C		/* I2C with hardware support*/
-#undef	CONFIG_SOFT_I2C		/* I2C bit-banged */
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_NOPROBES	{0x69}	/* Don't probe these addrs */
-#define CONFIG_SYS_I2C_OFFSET		0x3000
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+#define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x69} }
 
 /* EEPROM */
 #define CONFIG_ID_EEPROM
diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h
index eb4e620d8b..1ec3797e7c 100644
--- a/include/configs/MPC8555CDS.h
+++ b/include/configs/MPC8555CDS.h
@@ -265,13 +265,12 @@ extern unsigned long get_clock_freq(void);
 /*
  * I2C
  */
-#define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
-#define CONFIG_HARD_I2C		/* I2C with hardware support*/
-#undef	CONFIG_SOFT_I2C			/* I2C bit-banged */
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_NOPROBES        {0x69}	/* Don't probe these addrs */
-#define CONFIG_SYS_I2C_OFFSET		0x3000
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+#define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x69} }
 
 /* EEPROM */
 #define CONFIG_ID_EEPROM
diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h
index d4a557b675..49f6a35332 100644
--- a/include/configs/MPC8560ADS.h
+++ b/include/configs/MPC8560ADS.h
@@ -238,13 +238,12 @@
 /*
  * I2C
  */
-#define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
-#define CONFIG_HARD_I2C		/* I2C with hardware support*/
-#undef	CONFIG_SOFT_I2C			/* I2C bit-banged */
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_NOPROBES        {0x69}	/* Don't probe these addrs */
-#define CONFIG_SYS_I2C_OFFSET		0x3000
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+#define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x69} }
 
 /* RapidIO MMU */
 #define CONFIG_SYS_RIO_MEM_VIRT	0xc0000000	/* base address */
diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h
index 21ce7b9125..2d5e8c0b7b 100644
--- a/include/configs/MPC8568MDS.h
+++ b/include/configs/MPC8568MDS.h
@@ -250,16 +250,16 @@ extern unsigned long get_clock_freq(void);
 /*
  * I2C
  */
-#define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
-#define CONFIG_HARD_I2C		/* I2C with hardware support*/
-#undef	CONFIG_SOFT_I2C			/* I2C bit-banged */
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+#define CONFIG_SYS_FSL_I2C2_SPEED	400000
+#define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100
+#define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x69} }
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x52
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_NOPROBES        {{0,0x69}}	/* Don't probe these addrs */
-#define CONFIG_SYS_I2C_OFFSET		0x3000
-#define CONFIG_SYS_I2C2_OFFSET		0x3100
 
 /*
  * General PCI
diff --git a/include/configs/MPC8569MDS.h b/include/configs/MPC8569MDS.h
index 7f7cd20d78..c35fd2bdbc 100644
--- a/include/configs/MPC8569MDS.h
+++ b/include/configs/MPC8569MDS.h
@@ -286,15 +286,15 @@ extern unsigned long get_clock_freq(void);
 /*
  * I2C
  */
-#define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
-#define CONFIG_HARD_I2C		/* I2C with hardware support*/
-#undef	CONFIG_SOFT_I2C		/* I2C bit-banged */
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_SYS_I2C_SPEED	400000	/* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE	0x7F
-#define CONFIG_SYS_I2C_NOPROBES	{{0,0x69}}	/* Don't probe these addrs */
-#define CONFIG_SYS_I2C_OFFSET	0x3000
-#define CONFIG_SYS_I2C2_OFFSET	0x3100
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C2_SPEED	400000
+#define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+#define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100
+#define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x69} }
 
 /*
  * I2C2 EEPROM
diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h
index e9da736327..05d8870500 100644
--- a/include/configs/MPC8572DS.h
+++ b/include/configs/MPC8572DS.h
@@ -415,16 +415,16 @@
 #define CONFIG_FIT_VERBOSE	1 /* enable fit_format_{error,warning}() */
 
 /* I2C */
-#define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
-#define CONFIG_HARD_I2C		/* I2C with hardware support */
-#undef	CONFIG_SOFT_I2C		/* I2C bit-banged */
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+#define CONFIG_SYS_FSL_I2C2_SPEED	400000
+#define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100
+#define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x29} }
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x57
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_NOPROBES	{{0,0x29}}/* Don't probe these addrs */
-#define CONFIG_SYS_I2C_OFFSET		0x3000
-#define CONFIG_SYS_I2C2_OFFSET		0x3100
 
 /*
  * I2C2 EEPROM
diff --git a/include/configs/MPC8610HPCD.h b/include/configs/MPC8610HPCD.h
index f791e7682e..1553a746c8 100644
--- a/include/configs/MPC8610HPCD.h
+++ b/include/configs/MPC8610HPCD.h
@@ -252,13 +252,12 @@
 /*
  * I2C
  */
-#define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
-#define CONFIG_HARD_I2C		/* I2C with hardware support*/
-#undef	CONFIG_SOFT_I2C			/* I2C bit-banged */
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_NOPROBES	{0x69}	/* Don't probe these addrs */
-#define CONFIG_SYS_I2C_OFFSET		0x3000
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+#define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x69} }
 
 /*
  * General PCI
diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h
index 89049d0f62..6ca6f6b807 100644
--- a/include/configs/MPC8641HPCN.h
+++ b/include/configs/MPC8641HPCN.h
@@ -282,13 +282,12 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 /*
  * I2C
  */
-#define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
-#define CONFIG_HARD_I2C		/* I2C with hardware support*/
-#undef	CONFIG_SOFT_I2C			/* I2C bit-banged */
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_NOPROBES	{0x69}	/* Don't probe these addrs */
-#define CONFIG_SYS_I2C_OFFSET		0x3100
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3100
+#define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x69} }
 
 /*
  * RapidIO MMU
diff --git a/include/configs/MVBLM7.h b/include/configs/MVBLM7.h
index bb5a4fc5e3..044a1bc2c8 100644
--- a/include/configs/MVBLM7.h
+++ b/include/configs/MVBLM7.h
@@ -28,7 +28,6 @@
 #define CONFIG_PCI
 #define CONFIG_PCI_INDIRECT_BRIDGE
 #define CONFIG_PCI_SKIP_HOST_BRIDGE
-#define CONFIG_HARD_I2C
 #define CONFIG_TSEC_ENET
 #define CONFIG_MPC8XXX_SPI
 #define CONFIG_HARD_SPI
@@ -36,13 +35,14 @@
 #define CONFIG_MISC_INIT_R
 
 /* I2C */
-#define CONFIG_FSL_I2C
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_SYS_I2C_OFFSET		0x3000
-#define CONFIG_SYS_I2C2_OFFSET		0x3100
-
-#define CONFIG_SYS_I2C_SPEED		100000
-#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	100000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+#define CONFIG_SYS_FSL_I2C2_SPEED	100000
+#define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100
 
 /*
  * DDR Setup
diff --git a/include/configs/OCRTC.h b/include/configs/OCRTC.h
index be2ecf4640..c919613519 100644
--- a/include/configs/OCRTC.h
+++ b/include/configs/OCRTC.h
@@ -201,10 +201,11 @@
 /*-----------------------------------------------------------------------
  * I2C EEPROM (CAT24WC08) for environment
  */
-#define CONFIG_HARD_I2C			/* I2c with hardware support */
-#define CONFIG_PPC4XX_I2C		/* use PPC4xx driver		*/
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_PPC4XX
+#define CONFIG_SYS_I2C_PPC4XX_CH0
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0		400000
+#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0		0x7F
 
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT28WC08		*/
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1	/* Bytes of address		*/
diff --git a/include/configs/ORSG.h b/include/configs/ORSG.h
index fb0b89db9e..56d251cea5 100644
--- a/include/configs/ORSG.h
+++ b/include/configs/ORSG.h
@@ -197,10 +197,11 @@
 /*-----------------------------------------------------------------------
  * I2C EEPROM (CAT24WC08) for environment
  */
-#define CONFIG_HARD_I2C			/* I2c with hardware support */
-#define CONFIG_PPC4XX_I2C		/* use PPC4xx driver		*/
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_PPC4XX
+#define CONFIG_SYS_I2C_PPC4XX_CH0
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0		400000
+#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0		0x7F
 
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT28WC08		*/
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1	/* Bytes of address		*/
diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h
index 3fe4108219..ba3f7c2821 100644
--- a/include/configs/P1010RDB.h
+++ b/include/configs/P1010RDB.h
@@ -473,15 +473,15 @@ extern unsigned long get_sdram_size(void);
 #define CONFIG_FIT
 #define CONFIG_FIT_VERBOSE	/* enable fit_format_{error,warning}() */
 
-#define CONFIG_FSL_I2C			/* Use FSL common I2C driver */
-#define CONFIG_HARD_I2C			/* I2C with hardware support */
-#undef CONFIG_SOFT_I2C			/* I2C bit-banged */
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_I2C_CMD_TREE
-#define CONFIG_SYS_I2C_SPEED		400000 /* I2C speed and slave address*/
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_OFFSET		0x3000
-#define CONFIG_SYS_I2C2_OFFSET		0x3100
+/* I2C */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+#define CONFIG_SYS_FSL_I2C2_SPEED	400000
+#define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100
 
 /* I2C EEPROM */
 #undef CONFIG_ID_EEPROM
diff --git a/include/configs/P1022DS.h b/include/configs/P1022DS.h
index 0391a96a54..d1ce9fdc8d 100644
--- a/include/configs/P1022DS.h
+++ b/include/configs/P1022DS.h
@@ -358,15 +358,15 @@
 #define CONFIG_FIT_VERBOSE
 
 /* I2C */
-#define CONFIG_FSL_I2C
-#define CONFIG_HARD_I2C
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_SYS_I2C_SPEED		400000
-#define CONFIG_SYS_I2C_EEPROM_ADDR	0x57
-#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+#define CONFIG_SYS_FSL_I2C2_SPEED	400000
+#define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100
 #define CONFIG_SYS_I2C_NOPROBES		{{0, 0x29}}
-#define CONFIG_SYS_I2C_OFFSET		0x3000
-#define CONFIG_SYS_I2C2_OFFSET		0x3100
 
 /*
  * I2C2 EEPROM
diff --git a/include/configs/P1023RDB.h b/include/configs/P1023RDB.h
index 6b7579baf0..cd6d20c729 100644
--- a/include/configs/P1023RDB.h
+++ b/include/configs/P1023RDB.h
@@ -188,13 +188,14 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_FIT_VERBOSE	/* enable fit_format_{error,warning}() */
 
 /* I2C */
-#define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
-#define CONFIG_HARD_I2C		/* I2C with hardware support */
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_SYS_I2C_SPEED	400000	/* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_OFFSET		0x3000
-#define CONFIG_SYS_I2C2_OFFSET		0x3100
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+#define CONFIG_SYS_FSL_I2C2_SPEED	400000
+#define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100
 
 /*
  * I2C2 EEPROM
diff --git a/include/configs/P1023RDS.h b/include/configs/P1023RDS.h
index 3ebec6b590..a8202c67fd 100644
--- a/include/configs/P1023RDS.h
+++ b/include/configs/P1023RDS.h
@@ -297,15 +297,15 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_FIT_VERBOSE	/* enable fit_format_{error,warning}() */
 
 /* I2C */
-#define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
-#define CONFIG_HARD_I2C		/* I2C with hardware support */
-#undef	CONFIG_SOFT_I2C		/* I2C bit-banged */
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_SYS_I2C_SPEED	400000	/* I2C speed and slave address */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+#define CONFIG_SYS_FSL_I2C2_SPEED	400000
+#define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x51
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_OFFSET		0x3000
-#define CONFIG_SYS_I2C2_OFFSET		0x3100
 
 /*
  * I2C2 EEPROM
diff --git a/include/configs/P1_P2_RDB.h b/include/configs/P1_P2_RDB.h
index 447cd98daf..adaed564f7 100644
--- a/include/configs/P1_P2_RDB.h
+++ b/include/configs/P1_P2_RDB.h
@@ -351,16 +351,15 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_FIT_VERBOSE	1 /* enable fit_format_{error,warning}() */
 
 /* I2C */
-#define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
-#define CONFIG_HARD_I2C		/* I2C with hardware support */
-#undef	CONFIG_SOFT_I2C		/* I2C bit-banged */
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_I2C_CMD_TREE
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address*/
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_NOPROBES	{{0,0x29}}	/* Don't probe these addrs */
-#define CONFIG_SYS_I2C_OFFSET		0x3000
-#define CONFIG_SYS_I2C2_OFFSET		0x3100
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100
+#define CONFIG_SYS_FSL_I2C2_SPEED	400000
+#define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
+#define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x29} }
 
 /*
  * I2C2 EEPROM
diff --git a/include/configs/P2020COME.h b/include/configs/P2020COME.h
index d1c9b24810..08d1c25914 100644
--- a/include/configs/P2020COME.h
+++ b/include/configs/P2020COME.h
@@ -209,16 +209,15 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_FIT_VERBOSE		1
 
 /* I2C */
-#define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
-#define CONFIG_HARD_I2C		/* I2C with hardware support */
-#undef  CONFIG_SOFT_I2C		/* I2C bit-banged */
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_I2C_CMD_TREE
-#define CONFIG_SYS_I2C_SPEED		400000  /* I2C speed and slave address*/
-#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+#define CONFIG_SYS_FSL_I2C2_SPEED	400000
+#define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100
 #define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x29} }
-#define CONFIG_SYS_I2C_OFFSET		0x3000
-#define CONFIG_SYS_I2C2_OFFSET		0x3100
 
 /*
  * I2C2 EEPROM
diff --git a/include/configs/P2020DS.h b/include/configs/P2020DS.h
index 9df116e26b..b5078cdb52 100644
--- a/include/configs/P2020DS.h
+++ b/include/configs/P2020DS.h
@@ -371,15 +371,16 @@
 #define CONFIG_OF_STDOUT_VIA_ALIAS	1
 
 /* I2C */
-#define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
-#define CONFIG_HARD_I2C		/* I2C with hardware support */
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+#define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C2_SPEED	400000
+#define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x57
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_NOPROBES	{{0,0x29}}/* Don't probe these addrs */
-#define CONFIG_SYS_I2C_OFFSET		0x3000
-#define CONFIG_SYS_I2C2_OFFSET		0x3100
+#define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x29} }
 
 /*
  * I2C2 EEPROM
diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h
index 43387d7492..9814ca2012 100644
--- a/include/configs/P2041RDB.h
+++ b/include/configs/P2041RDB.h
@@ -351,14 +351,14 @@ unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_FIT_VERBOSE	/* enable fit_format_{error,warning}() */
 
 /* I2C */
-#define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
-#define CONFIG_HARD_I2C		/* I2C with hardware support */
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_I2C_CMD_TREE
-#define CONFIG_SYS_I2C_SPEED		400000
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_OFFSET		0x118000
-#define CONFIG_SYS_I2C2_OFFSET		0x118100
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+#define CONFIG_SYS_FSL_I2C2_SPEED	400000
+#define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100
 
 /*
  * RapidIO
diff --git a/include/configs/PCI405.h b/include/configs/PCI405.h
index 626a5463b6..a71a5219cf 100644
--- a/include/configs/PCI405.h
+++ b/include/configs/PCI405.h
@@ -193,10 +193,11 @@
 /*-----------------------------------------------------------------------
  * I2C EEPROM (CAT24WC16) for environment
  */
-#define CONFIG_HARD_I2C			/* I2c with hardware support */
-#define CONFIG_PPC4XX_I2C		/* use PPC4xx driver		*/
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_PPC4XX
+#define CONFIG_SYS_I2C_PPC4XX_CH0
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0		400000
+#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0		0x7F
 
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT28WC08		*/
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1	/* Bytes of address		*/
diff --git a/include/configs/PIP405.h b/include/configs/PIP405.h
index 036fec8cd8..2251ca6116 100644
--- a/include/configs/PIP405.h
+++ b/include/configs/PIP405.h
@@ -71,10 +71,11 @@
  * EEPROM of the SDRAM
  * The Atmel EEPROM uses 16Bit addressing.
  ***************************************************************/
-#define CONFIG_HARD_I2C			/* I2c with hardware support */
-#define CONFIG_PPC4XX_I2C		/* use PPC4xx driver		*/
-#define CONFIG_SYS_I2C_SPEED		50000	/* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_PPC4XX
+#define CONFIG_SYS_I2C_PPC4XX_CH0
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0		50000
+#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0		0x7F
 
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x53
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	2
diff --git a/include/configs/PLU405.h b/include/configs/PLU405.h
index 75c0926853..3c31cfb01a 100644
--- a/include/configs/PLU405.h
+++ b/include/configs/PLU405.h
@@ -265,10 +265,11 @@
 /*
  * I2C EEPROM (24WC16) for environment
  */
-#define CONFIG_HARD_I2C			/* I2c with hardware support */
-#define CONFIG_PPC4XX_I2C		/* use PPC4xx driver		*/
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_PPC4XX
+#define CONFIG_SYS_I2C_PPC4XX_CH0
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0		400000
+#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0		0x7F
 
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* EEPROM 24WC16 */
 #define CONFIG_SYS_EEPROM_WREN         1
diff --git a/include/configs/PM826.h b/include/configs/PM826.h
index 2c4aa2fd61..b466513ea3 100644
--- a/include/configs/PM826.h
+++ b/include/configs/PM826.h
@@ -41,10 +41,10 @@
 	"bootm"
 
 /* enable I2C and select the hardware/software driver */
-#undef  CONFIG_HARD_I2C
-#define CONFIG_SOFT_I2C		1	/* I2C bit-banged		*/
-# define CONFIG_SYS_I2C_SPEED		50000
-# define CONFIG_SYS_I2C_SLAVE		0xFE
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT		/* I2C bit-banged */
+#define CONFIG_SYS_I2C_SOFT_SPEED	50000
+#define CONFIG_SYS_I2C_SOFT_SLAVE	0xFE
 /*
  * Software (bit-bang) I2C driver configuration
  */
diff --git a/include/configs/PM828.h b/include/configs/PM828.h
index dbf980126b..cb68c41bab 100644
--- a/include/configs/PM828.h
+++ b/include/configs/PM828.h
@@ -41,10 +41,10 @@
 	"bootm"
 
 /* enable I2C and select the hardware/software driver */
-#undef	CONFIG_HARD_I2C
-#define CONFIG_SOFT_I2C		1	/* I2C bit-banged		*/
-# define CONFIG_SYS_I2C_SPEED		50000
-# define CONFIG_SYS_I2C_SLAVE		0xFE
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT		/* I2C bit-banged */
+#define CONFIG_SYS_I2C_SOFT_SPEED	50000
+#define CONFIG_SYS_I2C_SOFT_SLAVE	0xFE
 /*
  * Software (bit-bang) I2C driver configuration
  */
diff --git a/include/configs/PMC405.h b/include/configs/PMC405.h
index fbee0930d8..67a96d29d4 100644
--- a/include/configs/PMC405.h
+++ b/include/configs/PMC405.h
@@ -223,10 +223,11 @@
 /*
  * I2C EEPROM (CAT24WC16) for environment
  */
-#define CONFIG_HARD_I2C			/* I2c with hardware support */
-#define CONFIG_PPC4XX_I2C		/* use PPC4xx driver		*/
-#define CONFIG_SYS_I2C_SPEED		100000 /* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_PPC4XX
+#define CONFIG_SYS_I2C_PPC4XX_CH0
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0		100000
+#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0		0x7F
 
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT24W16 */
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1	/* Bytes of address */
diff --git a/include/configs/PMC405DE.h b/include/configs/PMC405DE.h
index 22b1177ace..531e95612a 100644
--- a/include/configs/PMC405DE.h
+++ b/include/configs/PMC405DE.h
@@ -201,10 +201,11 @@
 /*
  * I2C EEPROM (24W16) for environment
  */
-#define CONFIG_HARD_I2C			/* I2c with hardware support */
-#define CONFIG_PPC4XX_I2C		/* use PPC4xx driver		*/
-#define CONFIG_SYS_I2C_SPEED		400000 /* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_PPC4XX
+#define CONFIG_SYS_I2C_PPC4XX_CH0
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0		400000
+#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0		0x7F
 
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* EEPROM 24W16	*/
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1	/* Bytes of address */
diff --git a/include/configs/PMC440.h b/include/configs/PMC440.h
index 1b81861ac7..a54c099ce4 100644
--- a/include/configs/PMC440.h
+++ b/include/configs/PMC440.h
@@ -212,13 +212,14 @@
 /*-----------------------------------------------------------------------
  * I2C
  *----------------------------------------------------------------------*/
-#define CONFIG_HARD_I2C		1	/* I2C with hardware support    */
-#undef	CONFIG_SOFT_I2C		/* I2C bit-banged               */
-#define CONFIG_PPC4XX_I2C		/* use PPC4xx driver		*/
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address  */
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-
-#define CONFIG_I2C_MULTI_BUS	1
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_PPC4XX
+#define CONFIG_SYS_I2C_PPC4XX_CH0
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0		400000
+#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0		0x7F
+#define CONFIG_SYS_I2C_PPC4XX_CH1
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_1		400000
+#define CONFIG_SYS_I2C_PPC4XX_SLAVE_1		0x7F
 
 #define CONFIG_SYS_I2C_MULTI_EEPROMS
 
diff --git a/include/configs/PPChameleonEVB.h b/include/configs/PPChameleonEVB.h
index 1aaa8b0ae8..cd9eb4b10b 100644
--- a/include/configs/PPChameleonEVB.h
+++ b/include/configs/PPChameleonEVB.h
@@ -406,10 +406,11 @@
 /*-----------------------------------------------------------------------
  * I2C EEPROM (CAT24WC16) for environment
  */
-#define CONFIG_HARD_I2C			/* I2c with hardware support */
-#define CONFIG_PPC4XX_I2C		/* use PPC4xx driver		*/
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_PPC4XX
+#define CONFIG_SYS_I2C_PPC4XX_CH0
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0		400000
+#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0		0x7F
 
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT28WC08		*/
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1	/* Bytes of address		*/
diff --git a/include/configs/R360MPI.h b/include/configs/R360MPI.h
index 9ab524f4bf..efe699538c 100644
--- a/include/configs/R360MPI.h
+++ b/include/configs/R360MPI.h
@@ -81,10 +81,13 @@
 #define	CONFIG_RTC_MPC8xx		/* use internal RTC of MPC8xx	*/
 
 #define CONFIG_HARD_I2C		1	/* To I2C with hardware support */
-#undef CONFIG_SORT_I2C			/* To I2C with software support */
+#undef CONFIG_SYS_I2C_SOFT		/* To I2C with software support */
 #define CONFIG_SYS_I2C_SPEED		4700	/* I2C speed and slave address */
 #define CONFIG_SYS_I2C_SLAVE		0x7F
 
+#if defined(CONFIG_SYS_I2C_SOFT)
+#define CONFIG_SYS_SYS_I2C_SOFT_SPEED	4700 /* I2C speed and slave address */
+#define CONFIG_SYS_SYS_I2C_SOFT_SLAVE	0x7F
 /*
  * Software (bit-bang) I2C driver configuration
  */
@@ -100,6 +103,7 @@
 #define I2C_SCL(bit)		if(bit) immr->im_cpm.cp_pbdat |=  PB_SCL; \
 				else    immr->im_cpm.cp_pbdat &= ~PB_SCL
 #define I2C_DELAY		udelay(50)
+#endif /* #define(CONFIG_SYS_I2C_SOFT) */
 
 #define CONFIG_SYS_I2C_LCD_ADDR	0x8	/* LCD Control */
 #define CONFIG_SYS_I2C_KEY_ADDR	0x9	/* Keyboard coprocessor */
diff --git a/include/configs/RPXClassic.h b/include/configs/RPXClassic.h
index b0b0c91e4a..6ba8a02bcb 100644
--- a/include/configs/RPXClassic.h
+++ b/include/configs/RPXClassic.h
@@ -132,14 +132,16 @@
  * I2C Configuration
  *-----------------------------------------------------------------------------
  */
-#define CONFIG_I2C              1
-#define CONFIG_SYS_I2C_SPEED           50000
-#define CONFIG_SYS_I2C_SLAVE           0x34
+#define CONFIG_SYS_I2C_SPEED		50000
+#define CONFIG_SYS_I2C_SLAVE		0x34
 
 
 /* enable I2C and select the hardware/software driver */
 #define CONFIG_HARD_I2C		1	/* I2C with hardware support	*/
-#undef  CONFIG_SOFT_I2C			/* I2C bit-banged		*/
+#undef  CONFIG_SYS_I2C_SOFT		/* I2C bit-banged		*/
+
+#if defined(CONFIG_SYS_I2C_SOFT)
+#define CONFIG_SYS_I2C			1
 /*
  * Software (bit-bang) I2C driver configuration
  */
@@ -154,8 +156,10 @@
 #define I2C_DELAY	udelay(5)	/* 1/4 I2C clock duration */
 
 
-# define CONFIG_SYS_I2C_SPEED		50000
-# define CONFIG_SYS_I2C_SLAVE		0x34
+#define CONFIG_SYS_I2C_SOFT_SPEED	50000
+#define CONFIG_SYS_I2C_SOFT_SLAVE	0x34
+#endif
+
 # define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* EEPROM X24C16		*/
 # define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1	/* bytes of address		*/
 /* mask of address bits that overflow into the "EEPROM chip address"    */
diff --git a/include/configs/RPXlite.h b/include/configs/RPXlite.h
index 28132566df..ada7e145c0 100644
--- a/include/configs/RPXlite.h
+++ b/include/configs/RPXlite.h
@@ -46,6 +46,36 @@
 #undef	CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
 
 #define CONFIG_BZIP2		/* Include support for bzip2 compressed images  */
+
+/* enable I2C and select the hardware/software driver */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT		/* I2C bit-banged */
+#define CONFIG_SYS_I2C_SOFT_SPEED	40000	/* 40 kHz is supposed to work */
+#define CONFIG_SYS_I2C_SOFT_SLAVE	0xFE
+/* Software (bit-bang) I2C driver configuration */
+#define PB_SCL		0x00000020	/* PB 26 */
+#define PB_SDA		0x00000010	/* PB 27 */
+
+#define I2C_INIT	(immr->im_cpm.cp_pbdir |=  PB_SCL)
+#define I2C_ACTIVE	(immr->im_cpm.cp_pbdir |=  PB_SDA)
+#define I2C_TRISTATE	(immr->im_cpm.cp_pbdir &= ~PB_SDA)
+#define I2C_READ	((immr->im_cpm.cp_pbdat & PB_SDA) != 0)
+#define I2C_SDA(bit)	if (bit) \
+				immr->im_cpm.cp_pbdat |=  PB_SDA; \
+			else \
+				immr->im_cpm.cp_pbdat &= ~PB_SDA
+#define I2C_SCL(bit)	if (bit) \
+				immr->im_cpm.cp_pbdat |=  PB_SCL; \
+			else \
+				immr->im_cpm.cp_pbdat &= ~PB_SCL
+#define I2C_DELAY	udelay(5)	/* 1/4 I2C clock duration */
+
+/* M41T11 Serial Access Timekeeper(R) SRAM */
+#define CONFIG_RTC_M41T11 1
+#define CONFIG_SYS_I2C_RTC_ADDR 0x68
+/* play along with the linux driver */
+#define CONFIG_SYS_M41T11_BASE_YEAR 1900
+
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
 
 /*
diff --git a/include/configs/RRvision.h b/include/configs/RRvision.h
index 61ada9573d..06273a2ae1 100644
--- a/include/configs/RRvision.h
+++ b/include/configs/RRvision.h
@@ -106,13 +106,10 @@
 #endif
 
 /* enable I2C and select the hardware/software driver */
-#undef	CONFIG_HARD_I2C			/* I2C with hardware support	*/
-#define	CONFIG_SOFT_I2C			/* I2C bit-banged		*/
-
-# define CONFIG_SYS_I2C_SPEED		50000	/* 50 kHz is supposed to work	*/
-# define CONFIG_SYS_I2C_SLAVE		0xFE
-
-#ifdef CONFIG_SOFT_I2C
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT		/* I2C bit-banged */
+#define CONFIG_SYS_I2C_SOFT_SPEED	50000
+#define CONFIG_SYS_I2C_SOFT_SLAVE	0xFE
 /*
  * Software (bit-bang) I2C driver configuration
  */
@@ -128,7 +125,6 @@
 #define I2C_SCL(bit)	if(bit) immr->im_cpm.cp_pbdat |=  PB_SCL; \
 			else    immr->im_cpm.cp_pbdat &= ~PB_SCL
 #define I2C_DELAY	udelay(1)	/* 1/4 I2C clock duration */
-#endif	/* CONFIG_SOFT_I2C */
 
 
 /*
diff --git a/include/configs/SIMPC8313.h b/include/configs/SIMPC8313.h
index f5d6135870..3448ef35a8 100644
--- a/include/configs/SIMPC8313.h
+++ b/include/configs/SIMPC8313.h
@@ -229,14 +229,15 @@
 #define CONFIG_SYS_HUSH_PARSER
 
 /* I2C */
-#define CONFIG_HARD_I2C		/* I2C with hardware support*/
-#define CONFIG_FSL_I2C
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_SYS_I2C_SPEED	400000	/* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE	0x7F
-#define CONFIG_SYS_I2C_NOPROBES	{ {0, 0x69} } /* Don't probe these addrs */
-#define CONFIG_SYS_I2C_OFFSET	0x3000
-#define CONFIG_SYS_I2C2_OFFSET	0x3100
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+#define CONFIG_SYS_FSL_I2C2_SPEED	400000
+#define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100
+#define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x69} }
 
 /*
  * General PCI
diff --git a/include/configs/SXNI855T.h b/include/configs/SXNI855T.h
index dfb1426751..e2b05de381 100644
--- a/include/configs/SXNI855T.h
+++ b/include/configs/SXNI855T.h
@@ -104,7 +104,10 @@
 
 #define	CONFIG_RTC_DS1306		/* Dallas 1306 real time clock	*/
 
-#define	CONFIG_SOFT_I2C			/* I2C bit-banged		*/
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT		/* I2C bit-banged */
+#define CONFIG_SYS_I2C_SOFT_SPEED	50000
+#define CONFIG_SYS_I2C_SOFT_SLAVE	0xFE
 /*
  * Software (bit-bang) I2C driver configuration
  */
@@ -121,8 +124,6 @@
 			else    immr->im_cpm.cp_pbdat &= ~PB_SCL
 #define I2C_DELAY	udelay(5)	/* 1/4 I2C clock duration */
 
-# define CONFIG_SYS_I2C_SPEED		50000
-# define CONFIG_SYS_I2C_SLAVE		0xFE
 # define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* Atmel 24C64			*/
 # define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2	/* two byte address		*/
 
diff --git a/include/configs/Sandpoint8240.h b/include/configs/Sandpoint8240.h
index c5e0339268..ed8a32f7df 100644
--- a/include/configs/Sandpoint8240.h
+++ b/include/configs/Sandpoint8240.h
@@ -186,13 +186,16 @@
  * If the software driver is chosen, there are some additional
  * configuration items that the driver uses to drive the port pins.
  */
-#define CONFIG_HARD_I2C		1		/* To enable I2C support	*/
-#undef  CONFIG_SOFT_I2C				/* I2C bit-banged		*/
-#define CONFIG_SYS_I2C_SPEED		400000		/* I2C speed and slave address	*/
-#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_HARD_I2C		1		/* To enable I2C support */
+#undef  CONFIG_SYS_I2C_SOFT
+#define CONFIG_SYS_I2C_SLAVE	0x7F
+#define CONFIG_SYS_I2C_SPEED	400000
 
-#ifdef CONFIG_SOFT_I2C
+#ifdef CONFIG_SYS_I2C_SOFT
 #error "Soft I2C is not configured properly.  Please review!"
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT_SPEED	50000
+#define CONFIG_SYS_I2C_SOFT_SLAVE	0xFE
 #define I2C_PORT		3               /* Port A=0, B=1, C=2, D=3 */
 #define I2C_ACTIVE		(iop->pdir |=  0x00010000)
 #define I2C_TRISTATE		(iop->pdir &= ~0x00010000)
@@ -202,7 +205,7 @@
 #define I2C_SCL(bit)		if(bit) iop->pdat |=  0x00020000; \
 				else    iop->pdat &= ~0x00020000
 #define I2C_DELAY		udelay(5)	/* 1/4 I2C clock duration */
-#endif /* CONFIG_SOFT_I2C */
+#endif /* CONFIG_SYS_I2C_SOFT */
 
 
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x57		/* EEPROM IS24C02		*/
diff --git a/include/configs/Sandpoint8245.h b/include/configs/Sandpoint8245.h
index e1692dc0b2..97e8968243 100644
--- a/include/configs/Sandpoint8245.h
+++ b/include/configs/Sandpoint8245.h
@@ -156,13 +156,16 @@
  * If the software driver is chosen, there are some additional
  * configuration items that the driver uses to drive the port pins.
  */
-#define CONFIG_HARD_I2C		1		/* To enable I2C support	*/
-#undef  CONFIG_SOFT_I2C				/* I2C bit-banged		*/
-#define CONFIG_SYS_I2C_SPEED		400000		/* I2C speed and slave address	*/
-#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_HARD_I2C		1		/* To enable I2C support */
+#undef  CONFIG_SYS_I2C_SOFT
+#define CONFIG_SYS_I2C_SPEED	400000
+#define CONFIG_SYS_I2C_SLAVE	0x7F
 
-#ifdef CONFIG_SOFT_I2C
+#ifdef CONFIG_SYS_I2C_SOFT
 #error "Soft I2C is not configured properly.  Please review!"
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT_SPEED	50000
+#define CONFIG_SYS_I2C_SOFT_SLAVE	0xFE
 #define I2C_PORT		3               /* Port A=0, B=1, C=2, D=3 */
 #define I2C_ACTIVE		(iop->pdir |=  0x00010000)
 #define I2C_TRISTATE		(iop->pdir &= ~0x00010000)
@@ -172,7 +175,7 @@
 #define I2C_SCL(bit)		if(bit) iop->pdat |=  0x00020000; \
 				else    iop->pdat &= ~0x00020000
 #define I2C_DELAY		udelay(5)	/* 1/4 I2C clock duration */
-#endif /* CONFIG_SOFT_I2C */
+#endif /* CONFIG_SYS_I2C_SOFT */
 
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x57		/* EEPROM IS24C02		*/
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	1		/* Bytes of address		*/
diff --git a/include/configs/TASREG.h b/include/configs/TASREG.h
index 494ed078f8..bce4176f9d 100644
--- a/include/configs/TASREG.h
+++ b/include/configs/TASREG.h
@@ -120,19 +120,11 @@
 /*-----------------------------------------------------------------------
  * I2C
  */
-#define	CONFIG_SOFT_I2C
-#define CONFIG_SYS_I2C_SPEED		100000	/* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT28WC32		*/
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2	/* Bytes of address		*/
-/* mask of address bits that overflow into the "EEPROM chip address"	*/
-#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW	0x01
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5	/* The Catalyst CAT24WC32 has	*/
-					/* 32 byte page write mode using*/
-					/* last 5 bits of the address	*/
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT		/* I2C bit-banged */
+#define CONFIG_SYS_I2C_SOFT_SPEED	100000
+#define CONFIG_SYS_I2C_SOFT_SLAVE	0x7F
 
-#if defined (CONFIG_SOFT_I2C)
 #if 0 /* push-pull */
 #define	SDA	        0x00800000
 #define	SCL	        0x00000008
@@ -166,7 +158,17 @@
 #define	I2C_ACTIVE	{DIR1|=SDA;}
 #define	I2C_TRISTATE    {DIR1&=~SDA;}
 #endif
-#endif
+
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT28WC32	*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2	/* Bytes of address	*/
+/* mask of address bits that overflow into the "EEPROM chip address"	*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW	0x01
+/*
+ * The Catalyst CAT24WC32 has 32 byte page write mode using
+ * last 5 bits of the address
+ */
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
diff --git a/include/configs/TK885D.h b/include/configs/TK885D.h
index 39c39ee8c9..7f2b842993 100644
--- a/include/configs/TK885D.h
+++ b/include/configs/TK885D.h
@@ -88,13 +88,10 @@
 #undef	CONFIG_CAN_DRIVER		/* CAN Driver support disabled	*/
 
 /* enable I2C and select the hardware/software driver */
-#undef	CONFIG_HARD_I2C			/* I2C with hardware support	*/
-#define CONFIG_SOFT_I2C		1	/* I2C bit-banged		*/
-
-#define CONFIG_SYS_I2C_SPEED		93000	/* 93 kHz is supposed to work	*/
-#define CONFIG_SYS_I2C_SLAVE		0xFE
-
-#ifdef CONFIG_SOFT_I2C
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT			/* I2C bit-banged */
+#define CONFIG_SYS_I2C_SOFT_SPEED	93000	/* 93 kHz is supposed to work */
+#define CONFIG_SYS_I2C_SOFT_SLAVE	0xFE
 /*
  * Software (bit-bang) I2C driver configuration
  */
@@ -110,7 +107,6 @@
 #define I2C_SCL(bit)	if(bit) immr->im_cpm.cp_pbdat |=  PB_SCL; \
 			else	immr->im_cpm.cp_pbdat &= ~PB_SCL
 #define I2C_DELAY	udelay(2)	/* 1/4 I2C clock duration */
-#endif	/* CONFIG_SOFT_I2C */
 
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x50		/* EEPROM AT24C??	*/
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2		/* two byte address	*/
diff --git a/include/configs/TOP5200.h b/include/configs/TOP5200.h
index 3c7addbb54..00056a33d4 100644
--- a/include/configs/TOP5200.h
+++ b/include/configs/TOP5200.h
@@ -184,10 +184,13 @@
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_MISC_INIT_R
 
-#undef	CONFIG_HARD_I2C			/* I2C with hardware support */
-#define	CONFIG_SOFT_I2C		1	/* I2C with softwate support */
+#define CONFIG_SYS_I2C_SOFT		/* I2C bit-banged */
 
-#if defined (CONFIG_SOFT_I2C)
+#if defined(CONFIG_SYS_I2C_SOFT)
+#  define CONFIG_SYS_I2C
+#  define CONFIG_SYS_I2C_SOFT_SPEED	100000
+#  define CONFIG_SYS_I2C_SOFT_SLAVE	0x7F
+/**/
 #  define SDA0			0x40
 #  define SCL0			0x80
 #  define GPIOE0		*((volatile uchar*)(CONFIG_SYS_MBAR+0x0c00))
@@ -202,8 +205,7 @@
 #  define I2C_DELAY		{udelay(5);}
 #  define I2C_ACTIVE	{DDR0|=SDA0;}
 #  define I2C_TRISTATE	{DDR0&=~SDA0;}
-#  define CONFIG_SYS_I2C_SPEED		100000
-#  define CONFIG_SYS_I2C_SLAVE		0x7F
+
 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57
 #define CONFIG_SYS_I2C_FACT_ADDR	0x57
 #endif
diff --git a/include/configs/TOP860.h b/include/configs/TOP860.h
index c2210503a0..5c5ce84ff1 100644
--- a/include/configs/TOP860.h
+++ b/include/configs/TOP860.h
@@ -143,7 +143,6 @@
  * Environment handler
  * only the first 6k in EEPROM are available for user. Of that we use 256b
  */
-#define	CONFIG_SOFT_I2C
 #define CONFIG_ENV_IS_IN_EEPROM	1	/* turn on EEPROM env feature */
 #define CONFIG_ENV_OFFSET		0x1000
 #define CONFIG_ENV_SIZE		0x0700
@@ -154,13 +153,15 @@
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
 #define CONFIG_SYS_EEPROM_SIZE 0x2000
-#define	CONFIG_SYS_I2C_SPEED	100000
-#define	CONFIG_SYS_I2C_SLAVE	0xFE
 #define	CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 12
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_MISC_INIT_R
 
-#if defined (CONFIG_SOFT_I2C)
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT		/* I2C bit-banged */
+#define CONFIG_SYS_I2C_SOFT_SPEED	100000
+#define CONFIG_SYS_I2C_SOFT_SLAVE	0xFE
+/**/
 #define	SDA	0x00010
 #define	SCL	0x00020
 #define __I2C_DIR	immr->im_cpm.cp_pbdir
@@ -177,7 +178,6 @@
 #define	I2C_DELAY	{ udelay(5); }
 #define	I2C_ACTIVE	{ __I2C_DIR |= SDA; }
 #define	I2C_TRISTATE	{ __I2C_DIR &= ~SDA; }
-#endif
 
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
diff --git a/include/configs/TQM8260.h b/include/configs/TQM8260.h
index 006d53d345..1b02cbbca7 100644
--- a/include/configs/TQM8260.h
+++ b/include/configs/TQM8260.h
@@ -73,10 +73,10 @@
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
 /* enable I2C and select the hardware/software driver */
-#undef  CONFIG_HARD_I2C			/* I2C with hardware support	*/
-#define CONFIG_SOFT_I2C		1	/* I2C bit-banged		*/
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address	*/
-#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT		/* I2C bit-banged */
+#define CONFIG_SYS_I2C_SOFT_SPEED	400000
+#define CONFIG_SYS_I2C_SOFT_SLAVE	0x7F
 
 /*
  * Software (bit-bang) I2C driver configuration
diff --git a/include/configs/TQM8272.h b/include/configs/TQM8272.h
index c5b64b245a..3f586fbbc1 100644
--- a/include/configs/TQM8272.h
+++ b/include/configs/TQM8272.h
@@ -81,11 +81,10 @@
 
 #if CONFIG_I2C
 /* enable I2C and select the hardware/software driver */
-#undef  CONFIG_HARD_I2C			/* I2C with hardware support	*/
-#define CONFIG_SOFT_I2C		1	/* I2C bit-banged		*/
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address	*/
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT		/* I2C bit-banged */
+#define CONFIG_SYS_I2C_SOFT_SPEED	400000
+#define CONFIG_SYS_I2C_SOFT_SLAVE	0x7F
 /*
  * Software (bit-bang) I2C driver configuration
  */
@@ -119,8 +118,9 @@
 #define CONFIG_SYS_DTT_HYSTERESIS	3
 
 #else
+#undef CONFIG_SYS_I2C
 #undef CONFIG_HARD_I2C
-#undef CONFIG_SOFT_I2C
+#undef CONFIG_SYS_I2C_SOFT
 #endif
 
 /*
diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h
index 8eb217c5d8..07b5acb977 100644
--- a/include/configs/TQM834x.h
+++ b/include/configs/TQM834x.h
@@ -171,12 +171,11 @@
 /*
  * I2C
  */
-#define CONFIG_HARD_I2C			/* I2C with hardware support */
-#undef CONFIG_SOFT_I2C			/* I2C bit-banged */
-#define CONFIG_FSL_I2C
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed: 400KHz */
-#define CONFIG_SYS_I2C_SLAVE		0x7F	/* slave address */
-#define CONFIG_SYS_I2C_OFFSET		0x3000
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
 
 /* I2C EEPROM, configuration for onboard EEPROMs 24C256 and 24C32 */
 #define CONFIG_SYS_I2C_EEPROM_ADDR		0x50	/* 1010000x */
diff --git a/include/configs/TQM855M.h b/include/configs/TQM855M.h
index a893316efc..37e3541d68 100644
--- a/include/configs/TQM855M.h
+++ b/include/configs/TQM855M.h
@@ -77,13 +77,10 @@
 #undef	CONFIG_CAN_DRIVER		/* CAN Driver support disabled	*/
 
 /* enable I2C and select the hardware/software driver */
-#undef	CONFIG_HARD_I2C			/* I2C with hardware support	*/
-#define	CONFIG_SOFT_I2C         1	/* I2C bit-banged		*/
-
-#define CONFIG_SYS_I2C_SPEED		93000	/* 93 kHz is supposed to work	*/
-#define CONFIG_SYS_I2C_SLAVE		0xFE
-
-#ifdef CONFIG_SOFT_I2C
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT		/* I2C bit-banged */
+#define CONFIG_SYS_I2C_SOFT_SPEED	93000	/* 93 kHz is supposed to work */
+#define CONFIG_SYS_I2C_SOFT_SLAVE	0xFE
 /*
  * Software (bit-bang) I2C driver configuration
  */
@@ -99,7 +96,6 @@
 #define I2C_SCL(bit)	if(bit) immr->im_cpm.cp_pbdat |=  PB_SCL; \
 			else    immr->im_cpm.cp_pbdat &= ~PB_SCL
 #define I2C_DELAY	udelay(2)	/* 1/4 I2C clock duration */
-#endif	/* CONFIG_SOFT_I2C */
 
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x50		/* EEPROM AT24C64	*/
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	2		/* two byte address	*/
diff --git a/include/configs/TQM866M.h b/include/configs/TQM866M.h
index f28aa16c02..9cf263cff6 100644
--- a/include/configs/TQM866M.h
+++ b/include/configs/TQM866M.h
@@ -91,13 +91,11 @@
 #undef	CONFIG_CAN_DRIVER		/* CAN Driver support disabled	*/
 
 /* enable I2C and select the hardware/software driver */
-#undef	CONFIG_HARD_I2C			/* I2C with hardware support	*/
-#define CONFIG_SOFT_I2C		1	/* I2C bit-banged		*/
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT			/* I2C bit-banged */
+#define CONFIG_SYS_I2C_SOFT_SPEED	93000	/* 93 kHz is supposed to work */
+#define CONFIG_SYS_I2C_SOFT_SLAVE	0xFE
 
-#define CONFIG_SYS_I2C_SPEED		93000	/* 93 kHz is supposed to work	*/
-#define CONFIG_SYS_I2C_SLAVE		0xFE
-
-#ifdef CONFIG_SOFT_I2C
 /*
  * Software (bit-bang) I2C driver configuration
  */
@@ -113,7 +111,6 @@
 #define I2C_SCL(bit)	if(bit) immr->im_cpm.cp_pbdat |=  PB_SCL; \
 			else	immr->im_cpm.cp_pbdat &= ~PB_SCL
 #define I2C_DELAY	udelay(2)	/* 1/4 I2C clock duration */
-#endif	/* CONFIG_SOFT_I2C */
 
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x50		/* EEPROM AT24C256	*/
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2		/* two byte address	*/
diff --git a/include/configs/TQM885D.h b/include/configs/TQM885D.h
index e6b1e35d54..1f52efcf5b 100644
--- a/include/configs/TQM885D.h
+++ b/include/configs/TQM885D.h
@@ -85,13 +85,10 @@
 #undef	CONFIG_CAN_DRIVER		/* CAN Driver support disabled	*/
 
 /* enable I2C and select the hardware/software driver */
-#undef	CONFIG_HARD_I2C			/* I2C with hardware support	*/
-#define CONFIG_SOFT_I2C		1	/* I2C bit-banged		*/
-
-#define CONFIG_SYS_I2C_SPEED		93000	/* 93 kHz is supposed to work	*/
-#define CONFIG_SYS_I2C_SLAVE		0xFE
-
-#ifdef CONFIG_SOFT_I2C
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT			/* I2C bit-banged */
+#define CONFIG_SYS_I2C_SOFT_SPEED	93000	/* 93 kHz is supposed to work */
+#define CONFIG_SYS_I2C_SOFT_SLAVE	0xFE
 /*
  * Software (bit-bang) I2C driver configuration
  */
@@ -107,7 +104,6 @@
 #define I2C_SCL(bit)	if(bit) immr->im_cpm.cp_pbdat |=  PB_SCL; \
 			else	immr->im_cpm.cp_pbdat &= ~PB_SCL
 #define I2C_DELAY	udelay(2)	/* 1/4 I2C clock duration */
-#endif	/* CONFIG_SOFT_I2C */
 
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x50		/* EEPROM AT24C??	*/
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2		/* two byte address	*/
diff --git a/include/configs/VOH405.h b/include/configs/VOH405.h
index 6316fb566a..a1dad2b5bb 100644
--- a/include/configs/VOH405.h
+++ b/include/configs/VOH405.h
@@ -264,10 +264,11 @@
 /*-----------------------------------------------------------------------
  * I2C EEPROM (CAT24WC16) for environment
  */
-#define CONFIG_HARD_I2C			/* I2c with hardware support */
-#define CONFIG_PPC4XX_I2C		/* use PPC4xx driver		*/
-#define CONFIG_SYS_I2C_SPEED		100000	/* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_PPC4XX
+#define CONFIG_SYS_I2C_PPC4XX_CH0
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0		100000
+#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0		0x7F
 
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT24WC08		*/
 #define CONFIG_SYS_EEPROM_WREN         1
diff --git a/include/configs/VOM405.h b/include/configs/VOM405.h
index f3bd423b46..5daf175863 100644
--- a/include/configs/VOM405.h
+++ b/include/configs/VOM405.h
@@ -189,10 +189,11 @@
 /*
  * I2C EEPROM (CAT24WC16) for environment
  */
-#define CONFIG_HARD_I2C			/* I2c with hardware support */
-#define CONFIG_PPC4XX_I2C		/* use PPC4xx driver		*/
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_PPC4XX
+#define CONFIG_SYS_I2C_PPC4XX_CH0
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0		400000
+#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0		0x7F
 
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT28WC08		*/
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1	/* Bytes of address		*/
diff --git a/include/configs/W7OLMC.h b/include/configs/W7OLMC.h
index f388047ee5..51cfcf6e21 100644
--- a/include/configs/W7OLMC.h
+++ b/include/configs/W7OLMC.h
@@ -263,10 +263,11 @@
 /*-----------------------------------------------------------------------
  * I2C EEPROM (CAT24WC08) for environment
  */
-#define CONFIG_HARD_I2C			/* I2c with hardware support */
-#define CONFIG_PPC4XX_I2C		/* use PPC4xx driver		*/
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_PPC4XX
+#define CONFIG_SYS_I2C_PPC4XX_CH0
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0		400000
+#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0		0x7F
 
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT28WC08		*/
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	1	/* Bytes of address		*/
diff --git a/include/configs/W7OLMG.h b/include/configs/W7OLMG.h
index dba456108c..6769c0d806 100644
--- a/include/configs/W7OLMG.h
+++ b/include/configs/W7OLMG.h
@@ -270,10 +270,11 @@
 /*-----------------------------------------------------------------------
  * I2C EEPROM (ATMEL 24C04N)
  */
-#define CONFIG_HARD_I2C		1		/* Hardware assisted I2C	*/
-#define CONFIG_PPC4XX_I2C		/* use PPC4xx driver		*/
-#define CONFIG_SYS_I2C_SPEED		400000		/* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_PPC4XX
+#define CONFIG_SYS_I2C_PPC4XX_CH0
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0		400000
+#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0		0x7F
 
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x50		/* EEPROM ATMEL 24C04N		*/
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	1		/* Bytes of address		*/
diff --git a/include/configs/WUH405.h b/include/configs/WUH405.h
index df4652153c..f38d90ee3f 100644
--- a/include/configs/WUH405.h
+++ b/include/configs/WUH405.h
@@ -228,10 +228,11 @@
 /*-----------------------------------------------------------------------
  * I2C EEPROM (CAT24WC16) for environment
  */
-#define CONFIG_HARD_I2C			/* I2c with hardware support */
-#define CONFIG_PPC4XX_I2C		/* use PPC4xx driver		*/
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_PPC4XX
+#define CONFIG_SYS_I2C_PPC4XX_CH0
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0		400000
+#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0		0x7F
 
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT28WC08		*/
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1	/* Bytes of address		*/
diff --git a/include/configs/acadia.h b/include/configs/acadia.h
index 88c4aee153..f79706e1d2 100644
--- a/include/configs/acadia.h
+++ b/include/configs/acadia.h
@@ -190,7 +190,7 @@
 /*-----------------------------------------------------------------------
  * I2C
  *----------------------------------------------------------------------*/
-#define CONFIG_SYS_I2C_SPEED		400000		/* I2C speed and slave address	*/
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0		400000
 
 #define CONFIG_SYS_I2C_MULTI_EEPROMS
 #define CONFIG_SYS_I2C_EEPROM_ADDR	(0xa8>>1)
diff --git a/include/configs/alpr.h b/include/configs/alpr.h
index b9b4e9af99..5431b098c5 100644
--- a/include/configs/alpr.h
+++ b/include/configs/alpr.h
@@ -105,12 +105,12 @@
 /*-----------------------------------------------------------------------
  * I2C
  *----------------------------------------------------------------------*/
-#define CONFIG_HARD_I2C		1	/* I2C with hardware support	*/
-#undef	CONFIG_SOFT_I2C			/* I2C bit-banged		*/
-#define CONFIG_PPC4XX_I2C		/* use PPC4xx driver		*/
-#define CONFIG_SYS_I2C_SPEED		100000	/* I2C speed and slave address	*/
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_NOPROBES	{0x69}	/* Don't probe these addrs	*/
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_PPC4XX
+#define CONFIG_SYS_I2C_PPC4XX_CH0
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0		100000
+#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0		0x7F
+#define CONFIG_SYS_I2C_NOPROBES	{ {0, 0x69} }	/* Don't probe these addrs */
 
 /*-----------------------------------------------------------------------
  * I2C EEPROM (PCF8594C)
diff --git a/include/configs/amcc-common.h b/include/configs/amcc-common.h
index 72f75aae66..580d079ed1 100644
--- a/include/configs/amcc-common.h
+++ b/include/configs/amcc-common.h
@@ -29,9 +29,10 @@
 /*
  * I2C
  */
-#define CONFIG_HARD_I2C			/* I2C with hardware support	*/
-#define CONFIG_PPC4XX_I2C		/* use PPC4xx driver		*/
-#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_PPC4XX
+#define CONFIG_SYS_I2C_PPC4XX_CH0
+#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0		0x7F
 
 /*
  * Ethernet/EMAC/PHY
diff --git a/include/configs/aria.h b/include/configs/aria.h
index c9d090e000..68f25ea388 100644
--- a/include/configs/aria.h
+++ b/include/configs/aria.h
@@ -355,7 +355,6 @@
 
 /* I2C */
 #define CONFIG_HARD_I2C			/* I2C with hardware support */
-#undef CONFIG_SOFT_I2C			/* so disable bit-banged I2C */
 #define CONFIG_I2C_MULTI_BUS
 
 /* I2C speed and slave address */
diff --git a/include/configs/astro_mcf5373l.h b/include/configs/astro_mcf5373l.h
index 1124f0a29a..ed9400e4c0 100644
--- a/include/configs/astro_mcf5373l.h
+++ b/include/configs/astro_mcf5373l.h
@@ -100,12 +100,11 @@
 #undef CONFIG_MCFPIT
 
 /* I2C */
-#define CONFIG_FSL_I2C
-#define CONFIG_HARD_I2C			/* I2C with hw support */
-#undef CONFIG_SOFT_I2C			/* I2C bit-banged */
-#define CONFIG_SYS_I2C_SPEED		80000
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_OFFSET		0x58000
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	80000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x58000
 #define CONFIG_SYS_IMMR			CONFIG_SYS_MBAR
 
 /*
diff --git a/include/configs/bamboo.h b/include/configs/bamboo.h
index e585efe4d3..5336f69103 100644
--- a/include/configs/bamboo.h
+++ b/include/configs/bamboo.h
@@ -206,7 +206,7 @@
 /*-----------------------------------------------------------------------
  * I2C
  *----------------------------------------------------------------------*/
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address	*/
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0		400000
 
 #define CONFIG_SYS_I2C_MULTI_EEPROMS
 #define CONFIG_SYS_I2C_EEPROM_ADDR	(0xa8>>1)
diff --git a/include/configs/beaver.h b/include/configs/beaver.h
index 628d5d3db1..801caca24f 100644
--- a/include/configs/beaver.h
+++ b/include/configs/beaver.h
@@ -41,12 +41,11 @@
 #define CONFIG_BOARD_EARLY_INIT_F
 
 /* I2C */
-#define CONFIG_TEGRA_I2C
+#define CONFIG_SYS_I2C_TEGRA
 #define CONFIG_SYS_I2C_INIT_BOARD
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_SYS_MAX_I2C_BUS		TEGRA_I2C_NUM_CONTROLLERS
 #define CONFIG_SYS_I2C_SPEED		100000
 #define CONFIG_CMD_I2C
+#define CONFIG_SYS_I2C
 
 /* SD/MMC */
 #define CONFIG_MMC
diff --git a/include/configs/bf533-ezkit.h b/include/configs/bf533-ezkit.h
index c1a5ecda7e..beab1271a4 100644
--- a/include/configs/bf533-ezkit.h
+++ b/include/configs/bf533-ezkit.h
@@ -94,10 +94,15 @@
 /*
  * I2C Settings
  */
-#define CONFIG_SOFT_I2C
+#define CONFIG_SYS_I2C_SOFT
+#ifdef CONFIG_SYS_I2C_SOFT
+#define CONFIG_SYS_I2C
 #define CONFIG_SOFT_I2C_GPIO_SCL GPIO_PF0
 #define CONFIG_SOFT_I2C_GPIO_SDA GPIO_PF1
-
+#define CONFIG_SYS_I2C_SOFT_SPEED	50000
+#define CONFIG_SYS_I2C_SOFT_SLAVE	0
+#define I2C_DELAY              udelay(5)       /* 1/4 I2C clock duration */
+#endif
 
 /*
  * Misc Settings
diff --git a/include/configs/bf533-stamp.h b/include/configs/bf533-stamp.h
index e3344e9e85..7144c6319f 100644
--- a/include/configs/bf533-stamp.h
+++ b/include/configs/bf533-stamp.h
@@ -14,7 +14,6 @@
 #define CONFIG_BFIN_CPU             bf533-0.3
 #define CONFIG_BFIN_BOOT_MODE       BFIN_BOOT_BYPASS
 
-
 /*
  * Clock Settings
  *	CCLK = (CLKIN * VCO_MULT) / CCLK_DIV
@@ -38,7 +37,6 @@
 /* Values can range from 1-15						*/
 #define CONFIG_SCLK_DIV			6 /* note: 1.2 boards can go faster */
 
-
 /*
  * Memory Settings
  */
@@ -74,6 +72,42 @@
 /* #define CONFIG_ETHADDR	02:80:ad:20:31:b8 */
 
 
+/* I2C */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT		/* I2C bit-banged */
+#define CONFIG_SYS_I2C_SOFT_SPEED	50000
+#define CONFIG_SYS_I2C_SOFT_SLAVE	0
+/*
+ * Software (bit-bang) I2C driver configuration
+ */
+#define PF_SCL			PF3
+#define PF_SDA			PF2
+#define I2C_INIT		(*pFIO_DIR |=  PF_SCL); asm("ssync;")
+#define I2C_ACTIVE		(*pFIO_DIR |=  PF_SDA); \
+				*pFIO_INEN &= ~PF_SDA; asm("ssync;")
+#define I2C_TRISTATE		(*pFIO_DIR &= ~PF_SDA); \
+				*pFIO_INEN |= PF_SDA; asm("ssync;")
+#define I2C_READ		((volatile)(*pFIO_FLAG_D & PF_SDA) != 0); \
+				asm("ssync;")
+#define I2C_SDA(bit)	if (bit) { \
+				*pFIO_FLAG_S = PF_SDA; \
+				asm("ssync;"); \
+				} \
+			else	{ \
+				*pFIO_FLAG_C = PF_SDA; \
+				asm("ssync;"); \
+				}
+#define I2C_SCL(bit)	if (bit) { \
+				*pFIO_FLAG_S = PF_SCL; \
+				asm("ssync;"); \
+				} \
+			else	{ \
+				*pFIO_FLAG_C = PF_SCL; \
+				asm("ssync;"); \
+				}
+#define I2C_DELAY		udelay(5)	/* 1/4 I2C clock duration */
+
+
 /*
  * Flash Settings
  */
@@ -84,7 +118,6 @@
 #define CONFIG_SYS_MAX_FLASH_BANKS	1
 #define CONFIG_SYS_MAX_FLASH_SECT	67
 
-
 /*
  * SPI Settings
  */
@@ -132,10 +165,15 @@
 /*
  * I2C Settings
  */
-#define CONFIG_SOFT_I2C
+#define CONFIG_SYS_I2C_SOFT
+#ifdef CONFIG_SYS_I2C_SOFT
+#define CONFIG_SYS_I2C
 #define CONFIG_SOFT_I2C_GPIO_SCL GPIO_PF3
 #define CONFIG_SOFT_I2C_GPIO_SDA GPIO_PF2
-
+#define I2C_DELAY		udelay(5)	/* 1/4 I2C clock duration */
+#define CONFIG_SYS_I2C_SOFT_SPEED	50000
+#define CONFIG_SYS_I2C_SOFT_SLAVE	0
+#endif
 
 /*
  * Compact Flash / IDE / ATA Settings
diff --git a/include/configs/bf561-ezkit.h b/include/configs/bf561-ezkit.h
index 6ee1e4c869..404039ac23 100644
--- a/include/configs/bf561-ezkit.h
+++ b/include/configs/bf561-ezkit.h
@@ -88,10 +88,14 @@
 /*
  * I2C Settings
  */
-#define CONFIG_SOFT_I2C
+#define CONFIG_SYS_I2C_SOFT
+#ifdef CONFIG_SYS_I2C_SOFT
 #define CONFIG_SOFT_I2C_GPIO_SCL GPIO_PF0
 #define CONFIG_SOFT_I2C_GPIO_SDA GPIO_PF1
-
+#define I2C_DELAY		udelay(5)	/* 1/4 I2C clock duration */
+#define CONFIG_SYS_I2C_SOFT_SPEED	50000
+#define CONFIG_SYS_I2C_SOFT_SLAVE	0
+#endif
 
 /*
  * Misc Settings
diff --git a/include/configs/bfin_adi_common.h b/include/configs/bfin_adi_common.h
index e1a6fe3056..08ccce0b9a 100644
--- a/include/configs/bfin_adi_common.h
+++ b/include/configs/bfin_adi_common.h
@@ -71,7 +71,7 @@
 # ifdef CONFIG_SPI_FLASH
 #  define CONFIG_CMD_SF
 # endif
-# if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
+# if defined(CONFIG_HARD_I2C) || defined(CONFIG_SYS_I2C_SOFT)
 #  define CONFIG_CMD_I2C
 #  define CONFIG_SOFT_I2C_READ_REPEATED_START
 # endif
@@ -299,7 +299,7 @@
 /*
  * I2C Settings
  */
-#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
+#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SYS_I2C_SOFT)
 # ifndef CONFIG_SYS_I2C_SPEED
 #  define CONFIG_SYS_I2C_SPEED 50000
 # endif
diff --git a/include/configs/blackstamp.h b/include/configs/blackstamp.h
index 83ad659cdf..7d8227503a 100644
--- a/include/configs/blackstamp.h
+++ b/include/configs/blackstamp.h
@@ -40,7 +40,6 @@
 #define SHARED_RESOURCES	1
 
 /* Is I2C bit-banged? */
-#undef CONFIG_SOFT_I2
 
 /*
  * Clock Settings
@@ -115,7 +114,7 @@
 # undef CONFIG_CMD_NET
 #endif
 
-#ifdef CONFIG_SOFT_I2C
+#ifdef CONFIG_SYS_I2C_SOFT
 # define CONFIG_CMD_I2C
 #endif
 
@@ -204,11 +203,11 @@
  * Note these pins are arbitrarily chosen because we aren't using
  * them yet. You can (and probably should) change these values!
  */
-#ifdef CONFIG_SOFT_I2C
+#ifdef CONFIG_SYS_I2C_SOFT
 #define CONFIG_SOFT_I2C_GPIO_SCL GPIO_PF9
 #define CONFIG_SOFT_I2C_GPIO_SDA GPIO_PF8
-#define CONFIG_SYS_I2C_SPEED		50000
-#define CONFIG_SYS_I2C_SLAVE		0xFE
+#define CONFIG_SYS_SOFT_I2C_SPEED	50000
+#define CONFIG_SYS_SOFT_I2C_SLAVE	0xFE
 #endif
 
 /*
diff --git a/include/configs/blackvme.h b/include/configs/blackvme.h
index 523c4e409a..cd37f9adb9 100644
--- a/include/configs/blackvme.h
+++ b/include/configs/blackvme.h
@@ -224,7 +224,7 @@
  * Soft I2C settings (BF561 does not have hard I2C)
  * PF12,13 on SPI connector 0.
  */
-#ifdef CONFIG_SOFT_I2C
+#ifdef CONFIG_SYS_I2C_SOFT
 # define CONFIG_CMD_I2C
 # define CONFIG_SOFT_I2C_GPIO_SCL	GPIO_PF12
 # define CONFIG_SOFT_I2C_GPIO_SDA	GPIO_PF13
diff --git a/include/configs/bluestone.h b/include/configs/bluestone.h
index 5ea6f46bee..33e04963e6 100644
--- a/include/configs/bluestone.h
+++ b/include/configs/bluestone.h
@@ -109,7 +109,7 @@
 /*
  * I2C
  */
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed            */
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0		400000
 #define CONFIG_SYS_I2C_MULTI_EEPROMS
 #define CONFIG_SYS_I2C_EEPROM_ADDR		0x54
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
diff --git a/include/configs/bubinga.h b/include/configs/bubinga.h
index b02f86207a..9301fccbdc 100644
--- a/include/configs/bubinga.h
+++ b/include/configs/bubinga.h
@@ -118,9 +118,9 @@
  * I2C stuff
  *-----------------------------------------------------------------------
  */
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address	*/
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0		400000
 
-#define CONFIG_SYS_I2C_NOPROBES	{ 0x69 }	/* avoid i2c probe hangup (why?) */
+#define CONFIG_SYS_I2C_NOPROBES	{ {0, 0x69} }	/* avoid i2c probe hangup (?) */
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	6	/* 24C02 requires 5ms delay */
 
 #if defined(CONFIG_CMD_EEPROM)
diff --git a/include/configs/canyonlands.h b/include/configs/canyonlands.h
index 4353a8cb2b..f6faeec06c 100644
--- a/include/configs/canyonlands.h
+++ b/include/configs/canyonlands.h
@@ -316,7 +316,7 @@
 /*-----------------------------------------------------------------------
  * I2C
  *----------------------------------------------------------------------*/
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed			*/
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0		400000
 
 #define CONFIG_SYS_I2C_MULTI_EEPROMS
 #define CONFIG_SYS_I2C_EEPROM_ADDR		(0xa8>>1)
diff --git a/include/configs/cardhu.h b/include/configs/cardhu.h
index 142d20b5c5..4abb03ea56 100644
--- a/include/configs/cardhu.h
+++ b/include/configs/cardhu.h
@@ -40,12 +40,13 @@
 #define CONFIG_BOARD_EARLY_INIT_F
 
 /* I2C */
-#define CONFIG_TEGRA_I2C
+#define CONFIG_SYS_I2C_TEGRA
 #define CONFIG_SYS_I2C_INIT_BOARD
 #define CONFIG_I2C_MULTI_BUS
 #define CONFIG_SYS_MAX_I2C_BUS		TEGRA_I2C_NUM_CONTROLLERS
 #define CONFIG_SYS_I2C_SPEED		100000
 #define CONFIG_CMD_I2C
+#define CONFIG_SYS_I2C
 
 /* SD/MMC */
 #define CONFIG_MMC
diff --git a/include/configs/controlcenterd.h b/include/configs/controlcenterd.h
index cdd79f0769..c6aad01dba 100644
--- a/include/configs/controlcenterd.h
+++ b/include/configs/controlcenterd.h
@@ -192,15 +192,14 @@
 /*
  * I2C
  */
-#define CONFIG_HARD_I2C
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_CMD_I2C
-
-#define CONFIG_FSL_I2C
-#define CONFIG_SYS_I2C_OFFSET		0x3000
-#define CONFIG_SYS_I2C2_OFFSET		0x3100
-#define CONFIG_SYS_I2C_SPEED		400000
-#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+#define CONFIG_SYS_FSL_I2C2_SPEED	400000
+#define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100
 /* Probing DP501 I2C-Bridge will hang */
 #define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x30}, {0, 0x37}, {0, 0x3a}, \
 					  {0, 0x3b}, {0, 0x50} }
diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h
index a85680f103..c0591c5277 100644
--- a/include/configs/corenet_ds.h
+++ b/include/configs/corenet_ds.h
@@ -346,14 +346,14 @@
 #define CONFIG_FIT_VERBOSE	/* enable fit_format_{error,warning}() */
 
 /* I2C */
-#define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
-#define CONFIG_HARD_I2C		/* I2C with hardware support */
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_I2C_CMD_TREE
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_OFFSET		0x118000
-#define CONFIG_SYS_I2C2_OFFSET		0x118100
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x118000
+#define CONFIG_SYS_FSL_I2C2_SPEED	400000
+#define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C2_OFFSET	0x118100
 
 /*
  * RapidIO
diff --git a/include/configs/cpuat91.h b/include/configs/cpuat91.h
index 4a7c4fc288..c56fdd7517 100644
--- a/include/configs/cpuat91.h
+++ b/include/configs/cpuat91.h
@@ -76,7 +76,6 @@
 #define CONFIG_USART_ID		0/* ignored in arm */
 
 #undef CONFIG_HARD_I2C
-#undef CONFIG_SOFT_I2C
 #define AT91_PIN_SDA			(1<<25)
 #define AT91_PIN_SCL			(1<<26)
 
@@ -123,7 +122,7 @@
 #undef CONFIG_CMD_NFS
 #undef CONFIG_CMD_DHCP
 
-#ifdef CONFIG_SOFT_I2C
+#ifdef CONFIG_SYS_I2C_SOFT
 #define CONFIG_CMD_EEPROM
 #define CONFIG_CMD_I2C
 #endif
diff --git a/include/configs/csb272.h b/include/configs/csb272.h
index 663b8cbd44..49a144fd33 100644
--- a/include/configs/csb272.h
+++ b/include/configs/csb272.h
@@ -159,10 +159,11 @@
  * I2C configuration
  *
  */
-#define CONFIG_HARD_I2C		1	/* I2C with hardware support	*/
-#define CONFIG_PPC4XX_I2C		/* use PPC4xx driver		*/
-#define CONFIG_SYS_I2C_SPEED		100000	/* I2C speed			*/
-#define CONFIG_SYS_I2C_SLAVE		0x7F	/* I2C slave address		*/
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_PPC4XX
+#define CONFIG_SYS_I2C_PPC4XX_CH0
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0		100000
+#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0		0x7F	/* I2C slave address */
 
 /*
  * MII PHY configuration
diff --git a/include/configs/csb472.h b/include/configs/csb472.h
index 6f7dc18567..7705a5dda8 100644
--- a/include/configs/csb472.h
+++ b/include/configs/csb472.h
@@ -158,10 +158,11 @@
  * I2C configuration
  *
  */
-#define CONFIG_HARD_I2C		1	/* I2C with hardware support	*/
-#define CONFIG_PPC4XX_I2C		/* use PPC4xx driver		*/
-#define CONFIG_SYS_I2C_SPEED		100000	/* I2C speed			*/
-#define CONFIG_SYS_I2C_SLAVE		0x7F	/* I2C slave address		*/
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_PPC4XX
+#define CONFIG_SYS_I2C_PPC4XX_CH0
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0		100000
+#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0		0x7F	/* I2C slave address */
 
 /*
  * MII PHY configuration
diff --git a/include/configs/dalmore.h b/include/configs/dalmore.h
index b6e01617c8..145e7ac926 100644
--- a/include/configs/dalmore.h
+++ b/include/configs/dalmore.h
@@ -43,12 +43,13 @@
 #define CONFIG_BOARD_EARLY_INIT_F
 
 /* I2C */
-#define CONFIG_TEGRA_I2C
+#define CONFIG_SYS_I2C_TEGRA
 #define CONFIG_SYS_I2C_INIT_BOARD
 #define CONFIG_I2C_MULTI_BUS
 #define CONFIG_SYS_MAX_I2C_BUS		TEGRA_I2C_NUM_CONTROLLERS
 #define CONFIG_SYS_I2C_SPEED		100000
 #define CONFIG_CMD_I2C
+#define CONFIG_SYS_I2C
 
 /* SD/MMC */
 #define CONFIG_MMC
diff --git a/include/configs/debris.h b/include/configs/debris.h
index 660cceebd8..c9fb8d78cb 100644
--- a/include/configs/debris.h
+++ b/include/configs/debris.h
@@ -257,12 +257,15 @@
  * configuration items that the driver uses to drive the port pins.
  */
 #define CONFIG_HARD_I2C		1		/* To enable I2C support	*/
-#undef  CONFIG_SOFT_I2C				/* I2C bit-banged		*/
+#undef  CONFIG_SYS_I2C_SOFT			/* I2C bit-banged */
 #define CONFIG_SYS_I2C_SPEED		400000		/* I2C speed and slave address	*/
 #define CONFIG_SYS_I2C_SLAVE		0x7F
 
-#ifdef CONFIG_SOFT_I2C
+#ifdef CONFIG_SYS_I2C_SOFT
 #error "Soft I2C is not configured properly.  Please review!"
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT_SPEED	50000
+#define CONFIG_SYS_I2C_SOFT_SLAVE	0x7F
 #define I2C_PORT		3               /* Port A=0, B=1, C=2, D=3 */
 #define I2C_ACTIVE		(iop->pdir |=  0x00010000)
 #define I2C_TRISTATE		(iop->pdir &= ~0x00010000)
@@ -272,7 +275,7 @@
 #define I2C_SCL(bit)		if(bit) iop->pdat |=  0x00020000; \
 				else    iop->pdat &= ~0x00020000
 #define I2C_DELAY		udelay(5)	/* 1/4 I2C clock duration */
-#endif /* CONFIG_SOFT_I2C */
+#endif /* CONFIG_SYS_I2C_SOFT */
 
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x57		/* EEPROM IS24C02		*/
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	1		/* Bytes of address		*/
diff --git a/include/configs/dlvision-10g.h b/include/configs/dlvision-10g.h
index 84af895781..17391cddc9 100644
--- a/include/configs/dlvision-10g.h
+++ b/include/configs/dlvision-10g.h
@@ -98,7 +98,7 @@
 /*
  * I2C stuff
  */
-#define CONFIG_SYS_I2C_SPEED		100000
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0		100000
 
 /* Temp sensor/hwmon/dtt */
 #define CONFIG_DTT_LM63		1	/* National LM63	*/
diff --git a/include/configs/dlvision.h b/include/configs/dlvision.h
index d5bf735581..27471284ac 100644
--- a/include/configs/dlvision.h
+++ b/include/configs/dlvision.h
@@ -91,7 +91,7 @@
 /*
  * I2C stuff
  */
-#define CONFIG_SYS_I2C_SPEED		100000	/* I2C speed and slave address*/
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0		100000
 
 /*
  * FLASH organization
diff --git a/include/configs/eXalion.h b/include/configs/eXalion.h
index 6d9e2ad96a..c2d04a21c7 100644
--- a/include/configs/eXalion.h
+++ b/include/configs/eXalion.h
@@ -208,7 +208,7 @@
  * configuration items that the driver uses to drive the port pins.
  */
 #define CONFIG_HARD_I2C		1	/* To enable I2C support	*/
-#undef	CONFIG_SOFT_I2C		/* I2C bit-banged		*/
+#undef	CONFIG_SYS_I2C_SOFT		/* I2C bit-banged		*/
 #define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address	*/
 #define CONFIG_SYS_I2C_SLAVE		0x7F
 
diff --git a/include/configs/eb_cpu5282.h b/include/configs/eb_cpu5282.h
index 84cf9d74fc..08ba883f4c 100644
--- a/include/configs/eb_cpu5282.h
+++ b/include/configs/eb_cpu5282.h
@@ -246,14 +246,14 @@
  * I2C
  */
 
-#define CONFIG_HARD_I2C
-#define CONFIG_FSL_I2C
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
 
-#define CONFIG_SYS_I2C_OFFSET		0x00000300
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x00000300
 #define CONFIG_SYS_IMMR			CONFIG_SYS_MBAR
 
-#define CONFIG_SYS_I2C_SPEED		100000
-#define CONFIG_SYS_I2C_SLAVE		0
+#define CONFIG_SYS_FSL_I2C_SPEED	100000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0
 
 #ifdef CONFIG_CMD_DATE
 #define CONFIG_RTC_DS1338
diff --git a/include/configs/eb_cpux9k2.h b/include/configs/eb_cpux9k2.h
index a768ef3a32..247e37b6dd 100644
--- a/include/configs/eb_cpux9k2.h
+++ b/include/configs/eb_cpux9k2.h
@@ -207,11 +207,10 @@
  * I2C-Bus
  */
 
-#define CONFIG_SYS_I2C_SPEED		50000
-#define CONFIG_SYS_I2C_SLAVE		0 		/* not used */
-
-#ifndef CONFIG_HARD_I2C
-#define CONFIG_SOFT_I2C
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT		/* I2C bit-banged */
+#define CONFIG_SYS_I2C_SOFT_SPEED	50000
+#define CONFIG_SYS_I2C_SOFT_SLAVE	0
 
 /* Software  I2C driver configuration */
 
@@ -235,9 +234,7 @@
 	else							\
 		writel(ATMEL_PMX_AA_TWCK, &pio->pioa.codr);
 
-#define I2C_DELAY	udelay(2500000/CONFIG_SYS_I2C_SPEED)
-
-#endif	/* CONFIG_HARD_I2C */
+#define I2C_DELAY	udelay(2500000/CONFIG_SYS_I2C_SOFT_SPEED)
 
 /* I2C-RTC */
 
diff --git a/include/configs/ebony.h b/include/configs/ebony.h
index 800af72766..47014f9e30 100644
--- a/include/configs/ebony.h
+++ b/include/configs/ebony.h
@@ -122,7 +122,7 @@
 /*-----------------------------------------------------------------------
  * I2C
  *----------------------------------------------------------------------*/
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address	*/
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0		400000
 
 #define CONFIG_SYS_I2C_MULTI_EEPROMS
 #define CONFIG_SYS_I2C_EEPROM_ADDR	(0xa8>>1)
diff --git a/include/configs/ep8260.h b/include/configs/ep8260.h
index 5fdc46aa2d..aba3392234 100644
--- a/include/configs/ep8260.h
+++ b/include/configs/ep8260.h
@@ -211,15 +211,18 @@
  * If the software driver is chosen, there are some additional
  * configuration items that the driver uses to drive the port pins.
  */
-#undef  CONFIG_HARD_I2C			/* I2C with hardware support	*/
-#define CONFIG_SOFT_I2C		1	/* I2C bit-banged		*/
+#define CONFIG_SYS_I2C_SOFT		/* I2C bit-banged */
+
 #define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address	*/
-#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_SLAVE		0x7F	/* This is for HARD, must go */
 
 /*
  * Software (bit-bang) I2C driver configuration
  */
-#ifdef CONFIG_SOFT_I2C
+#ifdef CONFIG_SYS_I2C_SOFT
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT_SPEED	50000
+#define CONFIG_SYS_I2C_SOFT_SLAVE	0xFE
 #define I2C_PORT	3		/* Port A=0, B=1, C=2, D=3 */
 #define I2C_ACTIVE	(iop->pdir |=  0x00010000)
 #define I2C_TRISTATE	(iop->pdir &= ~0x00010000)
@@ -229,7 +232,7 @@
 #define I2C_SCL(bit)	if(bit) iop->pdat |=  0x00020000; \
 			else    iop->pdat &= ~0x00020000
 #define I2C_DELAY	udelay(5)	/* 1/4 I2C clock duration */
-#endif /* CONFIG_SOFT_I2C */
+#endif /* CONFIG_SYS_I2C_SOFT */
 
 /* #define CONFIG_RTC_DS174x */
 
diff --git a/include/configs/ethernut5.h b/include/configs/ethernut5.h
index 3cf27edcdc..adf14be365 100644
--- a/include/configs/ethernut5.h
+++ b/include/configs/ethernut5.h
@@ -194,10 +194,12 @@
 
 /* I2C */
 #define CONFIG_SYS_MAX_I2C_BUS	1
-#define CONFIG_SYS_I2C_SLAVE	0
-#define CONFIG_SYS_I2C_SPEED	100000
 
-#define CONFIG_SOFT_I2C
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT			/* I2C bit-banged */
+#define CONFIG_SYS_I2C_SOFT_SPEED	100000
+#define CONFIG_SYS_I2C_SOFT_SLAVE	0
+
 #define I2C_SOFT_DECLARATIONS
 
 #define GPIO_I2C_SCL		AT91_PIO_PORTA, 24
diff --git a/include/configs/gdppc440etx.h b/include/configs/gdppc440etx.h
index c95cb00e9e..cfb2a72716 100644
--- a/include/configs/gdppc440etx.h
+++ b/include/configs/gdppc440etx.h
@@ -129,7 +129,7 @@
 /*
  * I2C
  */
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed+slave address*/
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0		400000
 
 /*
  * Default environment variables
diff --git a/include/configs/ibf-dsp561.h b/include/configs/ibf-dsp561.h
index 294af735d6..5291755121 100644
--- a/include/configs/ibf-dsp561.h
+++ b/include/configs/ibf-dsp561.h
@@ -105,11 +105,11 @@
 /*
  * I2C Settings
  */
-#define CONFIG_SOFT_I2C		1
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT		/* I2C bit-banged */
 #define CONFIG_SOFT_I2C_GPIO_SCL GPIO_PF0
 #define CONFIG_SOFT_I2C_GPIO_SDA GPIO_PF1
 
-
 /*
  * Misc Settings
  */
diff --git a/include/configs/icon.h b/include/configs/icon.h
index fd8d56fe46..eafcf5aeaf 100644
--- a/include/configs/icon.h
+++ b/include/configs/icon.h
@@ -104,9 +104,8 @@
 /*
  * I2C
  */
-#define CONFIG_SYS_I2C_SPEED	100000	/* I2C speed and slave address	*/
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0	100000
 
-#define CONFIG_I2C_MULTI_BUS
 #define CONFIG_SYS_SPD_BUS_NUM	0	/* The I2C bus for SPD		*/
 
 #define CONFIG_SYS_I2C_MULTI_EEPROMS
diff --git a/include/configs/intip.h b/include/configs/intip.h
index fed0c3c23c..d3d7a441b6 100644
--- a/include/configs/intip.h
+++ b/include/configs/intip.h
@@ -215,7 +215,7 @@
 /*
  * I2C
  */
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed */
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0		400000
 
 #define CONFIG_SYS_I2C_MULTI_EEPROMS
 #define CONFIG_SYS_I2C_EEPROM_ADDR		(0xa8>>1)
diff --git a/include/configs/io.h b/include/configs/io.h
index af01ae25b3..33743e61ac 100644
--- a/include/configs/io.h
+++ b/include/configs/io.h
@@ -98,7 +98,7 @@
 /*
  * I2C stuff
  */
-#define CONFIG_SYS_I2C_SPEED		100000
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0		100000
 
 /* Temp sensor/hwmon/dtt */
 #define CONFIG_DTT_LM63		1	/* National LM63	*/
diff --git a/include/configs/io64.h b/include/configs/io64.h
index 274625dbd4..dcd1b82e25 100644
--- a/include/configs/io64.h
+++ b/include/configs/io64.h
@@ -324,7 +324,7 @@
 /*-----------------------------------------------------------------------
  * I2C
  *----------------------------------------------------------------------*/
-#define CONFIG_SYS_I2C_SPEED	400000	/* I2C speed and slave address */
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0	400000
 
 #define CONFIG_PCA9698		1	/* NXP PCA9698 */
 
diff --git a/include/configs/iocon.h b/include/configs/iocon.h
index bae525026e..32d9050adb 100644
--- a/include/configs/iocon.h
+++ b/include/configs/iocon.h
@@ -94,11 +94,11 @@
 /*
  * I2C stuff
  */
-#define CONFIG_SYS_I2C_SPEED		400000
-
-/* enable I2C and select the hardware/software driver */
-#undef  CONFIG_HARD_I2C			/* I2C with hardware support	*/
-#define CONFIG_SOFT_I2C		1	/* I2C bit-banged		*/
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_PPC4XX
+#define CONFIG_SYS_I2C_PPC4XX_CH0
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0		400000
+#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0		0x7F
 
 /*
  * Software (bit-bang) I2C driver configuration
diff --git a/include/configs/katmai.h b/include/configs/katmai.h
index 10871e8349..ca0df2d0ce 100644
--- a/include/configs/katmai.h
+++ b/include/configs/katmai.h
@@ -103,9 +103,8 @@
 /*-----------------------------------------------------------------------
  * I2C
  *----------------------------------------------------------------------*/
-#define CONFIG_SYS_I2C_SPEED		100000	/* I2C speed and slave address	*/
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0		100000
 
-#define CONFIG_I2C_MULTI_BUS
 #define CONFIG_SYS_SPD_BUS_NUM		0	/* The I2C bus for SPD		*/
 
 #define IIC0_BOOTPROM_ADDR	0x50
diff --git a/include/configs/kilauea.h b/include/configs/kilauea.h
index 613654c511..bd3bbb79a5 100644
--- a/include/configs/kilauea.h
+++ b/include/configs/kilauea.h
@@ -369,7 +369,7 @@
 /*-----------------------------------------------------------------------
  * I2C
  *----------------------------------------------------------------------*/
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address	*/
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0		400000
 
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x52	/* I2C boot EEPROM (24C02BN)	*/
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	1	/* Bytes of address		*/
diff --git a/include/configs/km/keymile-common.h b/include/configs/km/keymile-common.h
index d0e4b3fd47..a82987d6a0 100644
--- a/include/configs/km/keymile-common.h
+++ b/include/configs/km/keymile-common.h
@@ -62,10 +62,7 @@
 #define CONFIG_LOADS_ECHO
 #define CONFIG_SYS_LOADS_BAUD_CHANGE
 
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_SYS_MAX_I2C_BUS		1
 #define CONFIG_SYS_I2C_INIT_BOARD
-#define CONFIG_I2C_MUX
 
 /* Support the IVM EEprom */
 #define	CONFIG_SYS_IVM_EEPROM_ADR	0x50
diff --git a/include/configs/km/km83xx-common.h b/include/configs/km/km83xx-common.h
index 6b3a4cca30..0ff866a896 100644
--- a/include/configs/km/km83xx-common.h
+++ b/include/configs/km/km83xx-common.h
@@ -201,11 +201,23 @@
 #endif /* CFG_SYS_RAMBOOT */
 
 /* I2C */
-#define CONFIG_HARD_I2C		/* I2C with hardware support */
-#define CONFIG_FSL_I2C
-#define CONFIG_SYS_I2C_SPEED	200000	/* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE	0x7F
-#define CONFIG_SYS_I2C_OFFSET	0x3000
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_NUM_I2C_BUSES	4
+#define CONFIG_SYS_I2C_MAX_HOPS		1
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	200000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+#define CONFIG_SYS_I2C_OFFSET		0x3000
+#define CONFIG_SYS_FSL_I2C2_SPEED	200000
+#define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100
+#define CONFIG_SYS_I2C_BUSES	{{0, {I2C_NULL_HOP} }, \
+		{0, {{I2C_MUX_PCA9547, 0x70, 2} } }, \
+		{0, {{I2C_MUX_PCA9547, 0x70, 1} } }, \
+		{1, {I2C_NULL_HOP} } }
+
+#define CONFIG_KM_IVM_BUS		2	/* I2C2 (Mux-Port 1)*/
 
 /* I2C SYSMON (LM75, AD7414 is almost compatible) */
 #define CONFIG_DTT_LM75		/* ON Semi's LM75 */
@@ -213,7 +225,7 @@
 #define CONFIG_SYS_DTT_MAX_TEMP	70
 #define CONFIG_SYS_DTT_LOW_TEMP	-30
 #define CONFIG_SYS_DTT_HYSTERESIS	3
-#define CONFIG_SYS_DTT_BUS_NUM		(CONFIG_SYS_MAX_I2C_BUS)
+#define CONFIG_SYS_DTT_BUS_NUM		1
 
 #if defined(CONFIG_CMD_NAND)
 #define CONFIG_NAND_KMETER1
@@ -309,7 +321,6 @@
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	CONFIG_KM_DEF_ENV						\
 	CONFIG_KM_DEF_ARCH						\
-	"EEprom_ivm=pca9547:70:9\0"					\
 	"newenv="							\
 		"prot off 0xF00C0000 +0x40000 && "			\
 		"era 0xF00C0000 +0x40000\0"				\
diff --git a/include/configs/km/km_arm.h b/include/configs/km/km_arm.h
index 97bdeba15c..e0368cb894 100644
--- a/include/configs/km/km_arm.h
+++ b/include/configs/km/km_arm.h
@@ -42,7 +42,6 @@
 
 #define CONFIG_CMD_NAND
 #define CONFIG_CMD_SF
-#define CONFIG_SOFT_I2C		/* I2C bit-banged	*/
 
 /* SPI NOR Flash default params, used by sf commands */
 #define CONFIG_SF_DEFAULT_SPEED		8100000
@@ -171,8 +170,23 @@
 /*
  * I2C related stuff
  */
+#undef CONFIG_I2C_MVTWSI
+#define CONFIG_SYS_I2C
+#define	CONFIG_SYS_I2C_SOFT	/* I2C bit-banged	*/
+
 #define	CONFIG_KIRKWOOD_GPIO		/* Enable GPIO Support */
-#if defined(CONFIG_SOFT_I2C)
+#if defined(CONFIG_SYS_I2C_SOFT)
+
+#define CONFIG_SYS_NUM_I2C_BUSES	6
+#define CONFIG_SYS_I2C_MAX_HOPS		1
+#define CONFIG_SYS_I2C_BUSES	{	{0, {I2C_NULL_HOP} }, \
+					{0, {{I2C_MUX_PCA9547, 0x70, 1} } }, \
+					{0, {{I2C_MUX_PCA9547, 0x70, 2} } }, \
+					{0, {{I2C_MUX_PCA9547, 0x70, 3} } }, \
+					{0, {{I2C_MUX_PCA9547, 0x70, 4} } }, \
+					{0, {{I2C_MUX_PCA9547, 0x70, 5} } }, \
+				}
+
 #ifndef __ASSEMBLY__
 #include <asm/arch-kirkwood/gpio.h>
 extern void __set_direction(unsigned pin, int high);
@@ -195,6 +209,8 @@ int get_scl(void);
 #define I2C_DELAY	udelay(1)
 #define I2C_SOFT_DECLARATIONS
 
+#define	CONFIG_SYS_I2C_SOFT_SLAVE	0x0
+#define	CONFIG_SYS_I2C_SOFT_SPEED	100000
 #endif
 
 /* EEprom support 24C128, 24C256 valid for environment eeprom */
@@ -224,7 +240,7 @@ int get_scl(void);
 #define CONFIG_SYS_EEPROM_WREN
 #define CONFIG_ENV_OFFSET		0x0 /* no bracets! */
 #define CONFIG_ENV_SIZE			(0x2000 - CONFIG_ENV_OFFSET)
-#define CONFIG_I2C_ENV_EEPROM_BUS	KM_ENV_BUS "\0"
+#define CONFIG_I2C_ENV_EEPROM_BUS	KM_ENV_BUS
 #define CONFIG_ENV_OFFSET_REDUND	0x2000 /* no bracets! */
 #define CONFIG_ENV_SIZE_REDUND		(CONFIG_ENV_SIZE)
 #endif
@@ -263,7 +279,8 @@ int get_scl(void);
 #else
 #define CONFIG_KM_NEW_ENV						\
 	"newenv=setenv addr 0x100000 && "				\
-		"i2c dev 1; mw.b ${addr} 0 4 && "			\
+		"i2c dev " __stringify(CONFIG_I2C_ENV_EEPROM_BUS) "; "  \
+		"mw.b ${addr} 0 4 && "					\
 		"eeprom write " __stringify(CONFIG_SYS_DEF_EEPROM_ADDR)	\
 		" ${addr} " __stringify(CONFIG_ENV_OFFSET) " 4 && "	\
 		"eeprom write " __stringify(CONFIG_SYS_DEF_EEPROM_ADDR)	\
@@ -277,7 +294,6 @@ int get_scl(void);
 	CONFIG_KM_DEF_ENV						\
 	CONFIG_KM_NEW_ENV						\
 	"arch=arm\0"							\
-	"EEprom_ivm=" KM_IVM_BUS "\0"					\
 	""
 
 #if defined(CONFIG_SYS_NO_FLASH)
diff --git a/include/configs/km82xx.h b/include/configs/km82xx.h
index b087cdb240..b23cb96274 100644
--- a/include/configs/km82xx.h
+++ b/include/configs/km82xx.h
@@ -196,7 +196,6 @@
 #define	CONFIG_EXTRA_ENV_SETTINGS					\
 	CONFIG_KM_BOARD_EXTRA_ENV					\
 	CONFIG_KM_DEF_ENV						\
-	"EEprom_ivm=pca9544a:70:4 \0"					\
 	"unlock=yes\0"							\
 	"newenv="							\
 		"prot off 0xFE0C0000 +0x40000 && "			\
@@ -226,10 +225,18 @@
 #endif /* CONFIG_ENV_IS_IN_FLASH */
 
 /* enable I2C and select the hardware/software driver */
-#undef	CONFIG_HARD_I2C			/* I2C with hardware support	*/
-#define	CONFIG_SOFT_I2C			/* I2C bit-banged		*/
-#define CONFIG_SYS_I2C_SPEED		50000	/* I2C speed */
-#define CONFIG_SYS_I2C_SLAVE		0x7F	/* I2C slave address */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT		/* I2C bit-banged */
+#define CONFIG_SYS_NUM_I2C_BUSES	3
+#define CONFIG_SYS_I2C_MAX_HOPS		1
+#define CONFIG_SYS_I2C_SOFT_SPEED	50000
+#define CONFIG_SYS_I2C_SPEED		CONFIG_SYS_I2C_SOFT_SPEED
+#define CONFIG_SYS_I2C_SOFT_SLAVE	0x7F
+#define CONFIG_SYS_I2C_BUSES	{{0, {I2C_NULL_HOP} }, \
+			{0, {{I2C_MUX_PCA9542, 0x70, 0} } }, \
+			{0, {{I2C_MUX_PCA9542, 0x70, 1} } } }
+
+#define CONFIG_KM_IVM_BUS		1	/* I2C2 (Mux-Port 1)*/
 
 /*
  * Software (bit-bang) I2C driver configuration
@@ -266,7 +273,7 @@ int get_scl(void);
 #define CONFIG_SYS_DTT_MAX_TEMP	70
 #define CONFIG_SYS_DTT_LOW_TEMP	-30
 #define CONFIG_SYS_DTT_HYSTERESIS	3
-#define CONFIG_SYS_DTT_BUS_NUM		(CONFIG_SYS_MAX_I2C_BUS)
+#define CONFIG_SYS_DTT_BUS_NUM		2
 
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	1
 
diff --git a/include/configs/km_kirkwood.h b/include/configs/km_kirkwood.h
index 68d1bf6c66..0e6073c642 100644
--- a/include/configs/km_kirkwood.h
+++ b/include/configs/km_kirkwood.h
@@ -26,18 +26,18 @@
 #define CONFIG_IDENT_STRING		"\nKeymile Kirkwood"
 #define CONFIG_HOSTNAME			km_kirkwood
 #define CONFIG_KM_DISABLE_PCIE
-#define KM_IVM_BUS			"pca9544a:70:9"	/* I2C2 (Mux-Port 1)*/
+#define CONFIG_KM_IVM_BUS		1	/* I2C2 (Mux-Port 1)*/
 
 /* KM_KIRKWOOD_PCI */
 #elif defined(CONFIG_KM_KIRKWOOD_PCI)
 #define CONFIG_IDENT_STRING		"\nKeymile Kirkwood PCI"
 #define CONFIG_HOSTNAME			km_kirkwood_pci
-#define KM_IVM_BUS			"pca9544a:70:9"	/* I2C2 (Mux-Port 1)*/
+#define CONFIG_KM_IVM_BUS		1	/* I2C2 (Mux-Port 1)*/
 #define CONFIG_KM_FPGA_CONFIG
 
 /* KM_NUSA */
 #elif defined(CONFIG_KM_NUSA)
-#define KM_IVM_BUS			"pca9547:70:9"	/* I2C2 (Mux-Port 1)*/
+#define CONFIG_KM_IVM_BUS		1	/* I2C2 (Mux-Port 1)*/
 #define CONFIG_IDENT_STRING		"\nKeymile NUSA"
 #define CONFIG_HOSTNAME			kmnusa
 #undef CONFIG_SYS_KWD_CONFIG
@@ -53,7 +53,7 @@
 #elif defined(CONFIG_KM_MGCOGE3UN)
 #define CONFIG_IDENT_STRING		"\nKeymile COGE3UN"
 #define CONFIG_HOSTNAME			mgcoge3un
-#define KM_IVM_BUS			"pca9547:70:9" /* I2C2 (Mux-Port 1)*/
+#define CONFIG_KM_IVM_BUS		1	/* I2C2 (Mux-Port 1)*/
 #undef CONFIG_SYS_KWD_CONFIG
 #define CONFIG_SYS_KWD_CONFIG \
 		$(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage-memphis.cfg
@@ -65,7 +65,7 @@
 /* KMCOGE5UN */
 #elif defined(CONFIG_KM_COGE5UN)
 #define CONFIG_IDENT_STRING		"\nKeymile COGE5UN"
-#define KM_IVM_BUS			"pca9547:70:9"	/* I2C2 (Mux-Port 1)*/
+#define CONFIG_KM_IVM_BUS		1	/* I2C2 (Mux-Port 1)*/
 #undef	CONFIG_SYS_KWD_CONFIG
 #define CONFIG_SYS_KWD_CONFIG \
 		$(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage_256M8_1.cfg
@@ -79,12 +79,12 @@
 #elif defined(CONFIG_KM_PORTL2)
 #define CONFIG_IDENT_STRING		"\nKeymile Port-L2"
 #define CONFIG_HOSTNAME			portl2
-#define KM_IVM_BUS			"pca9544a:70:9" /* I2C2 (Mux-Port 1)*/
+#define CONFIG_KM_IVM_BUS		1	/* I2C2 (Mux-Port 1)*/
 #define CONFIG_KM_PIGGY4_88E6061
 
 /* KM_SUV31 */
 #elif defined(CONFIG_KM_SUV31)
-#define KM_IVM_BUS			"pca9547:70:9"	/* I2C2 (Mux-Port 1)*/
+#define CONFIG_KM_IVM_BUS		1	/* I2C2 (Mux-Port 1)*/
 #define CONFIG_IDENT_STRING		"\nKeymile SUV31"
 #define CONFIG_HOSTNAME			kmsuv31
 #define CONFIG_KM_ENV_IS_IN_SPI_NOR
@@ -98,7 +98,7 @@
 #include "km/km_arm.h"
 
 #ifndef CONFIG_KM_ENV_IS_IN_SPI_NOR
-#define KM_ENV_BUS	"pca9544a:70:d"	/* I2C2 (Mux-Port 5)*/
+#define KM_ENV_BUS	5	/* I2C2 (Mux-Port 5)*/
 #endif
 
 #if defined(CONFIG_KM_PIGGY4_88E6352)
diff --git a/include/configs/korat.h b/include/configs/korat.h
index 3410733ed7..7c7a305175 100644
--- a/include/configs/korat.h
+++ b/include/configs/korat.h
@@ -142,11 +142,11 @@
 /*
  * I2C
  */
-#define CONFIG_HARD_I2C		1	/* I2C with hardware support	*/
-#undef	CONFIG_SOFT_I2C			/* I2C bit-banged		*/
-#define CONFIG_PPC4XX_I2C		/* use PPC4xx driver		*/
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address	*/
-#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_PPC4XX
+#define CONFIG_SYS_I2C_PPC4XX_CH0
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0		400000
+#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0		0x7F
 
 #define CONFIG_SYS_I2C_MULTI_EEPROMS
 #define CONFIG_SYS_I2C_EEPROM_ADDR	(0xa8>>1)
diff --git a/include/configs/luan.h b/include/configs/luan.h
index 37111acdfb..8ecdf8049d 100644
--- a/include/configs/luan.h
+++ b/include/configs/luan.h
@@ -118,7 +118,7 @@
 /*-----------------------------------------------------------------------
  * I2C
  *----------------------------------------------------------------------*/
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address	*/
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0		400000
 
 #define CONFIG_SYS_I2C_MULTI_EEPROMS
 #define CONFIG_SYS_I2C_EEPROM_ADDR	(0xa8>>1)
diff --git a/include/configs/lwmon.h b/include/configs/lwmon.h
index a1cee6832c..459c047b71 100644
--- a/include/configs/lwmon.h
+++ b/include/configs/lwmon.h
@@ -130,13 +130,10 @@
 #undef	CONFIG_STATUS_LED		/* Status LED disabled		*/
 
 /* enable I2C and select the hardware/software driver */
-#undef	CONFIG_HARD_I2C			/* I2C with hardware support	*/
-#define	CONFIG_SOFT_I2C         1	/* I2C bit-banged		*/
-
-#define CONFIG_SYS_I2C_SPEED		93000	/* 93 kHz is supposed to work	*/
-#define CONFIG_SYS_I2C_SLAVE		0xFE
-
-#ifdef CONFIG_SOFT_I2C
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT		/* I2C bit-banged */
+#define CONFIG_SYS_I2C_SOFT_SPEED	93000	/* 93 kHz is supposed to work */
+#define CONFIG_SYS_I2C_SOFT_SLAVE	0xFE
 /*
  * Software (bit-bang) I2C driver configuration
  */
@@ -152,7 +149,6 @@
 #define I2C_SCL(bit)	if(bit) immr->im_cpm.cp_pbdat |=  PB_SCL; \
 			else    immr->im_cpm.cp_pbdat &= ~PB_SCL
 #define I2C_DELAY	udelay(2)	/* 1/4 I2C clock duration */
-#endif	/* CONFIG_SOFT_I2C */
 
 
 #define CONFIG_RTC_PCF8563		/* use Philips PCF8563 RTC	*/
diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h
index e2c436ff97..8f5eb956ae 100644
--- a/include/configs/lwmon5.h
+++ b/include/configs/lwmon5.h
@@ -285,11 +285,11 @@
 /*
  * I2C
  */
-#define CONFIG_HARD_I2C				/* I2C with hardware support	*/
-#undef	CONFIG_SOFT_I2C				/* I2C bit-banged		*/
-#define CONFIG_PPC4XX_I2C		/* use PPC4xx driver		*/
-#define CONFIG_SYS_I2C_SPEED		100000		/* I2C speed and slave address	*/
-#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_PPC4XX
+#define CONFIG_SYS_I2C_PPC4XX_CH0
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0		100000
+#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0		0x7F
 
 #define CONFIG_SYS_I2C_RTC_ADDR	0x51	/* RTC				*/
 #define CONFIG_SYS_I2C_EEPROM_CPU_ADDR	0x52	/* EEPROM          (CPU Modul)	*/
diff --git a/include/configs/makalu.h b/include/configs/makalu.h
index 520ab8c98c..e7ed917f84 100644
--- a/include/configs/makalu.h
+++ b/include/configs/makalu.h
@@ -185,7 +185,7 @@
 /*-----------------------------------------------------------------------
  * I2C
  *----------------------------------------------------------------------*/
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address	*/
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0		400000
 
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	6	/* 24C02 requires 5ms delay */
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x52	/* I2C boot EEPROM (24C02BN)	*/
diff --git a/include/configs/mecp5123.h b/include/configs/mecp5123.h
index 9a483e7448..b48872b267 100644
--- a/include/configs/mecp5123.h
+++ b/include/configs/mecp5123.h
@@ -250,7 +250,6 @@
 
 /* I2C */
 #define CONFIG_HARD_I2C			/* I2C with hardware support */
-#undef CONFIG_SOFT_I2C			/* so disable bit-banged I2C */
 #define CONFIG_I2C_MULTI_BUS
 #define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed */
 #define CONFIG_SYS_I2C_SLAVE		0x7F	/* slave address */
diff --git a/include/configs/mpc5121ads.h b/include/configs/mpc5121ads.h
index 1ad023b905..85ae3671f1 100644
--- a/include/configs/mpc5121ads.h
+++ b/include/configs/mpc5121ads.h
@@ -344,7 +344,6 @@
 
 /* I2C */
 #define CONFIG_HARD_I2C			/* I2C with hardware support */
-#undef CONFIG_SOFT_I2C			/* so disable bit-banged I2C */
 #define CONFIG_I2C_MULTI_BUS
 #define CONFIG_SYS_I2C_SPEED		100000	/* I2C speed and slave address */
 #define CONFIG_SYS_I2C_SLAVE		0x7F
diff --git a/include/configs/mpc8308_p1m.h b/include/configs/mpc8308_p1m.h
index 3927250ba0..6875cf4c5b 100644
--- a/include/configs/mpc8308_p1m.h
+++ b/include/configs/mpc8308_p1m.h
@@ -311,13 +311,14 @@
 #define CONFIG_OF_STDOUT_VIA_ALIAS	1
 
 /* I2C */
-#define CONFIG_HARD_I2C		/* I2C with hardware support */
-#define CONFIG_FSL_I2C
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_SYS_I2C_SPEED	400000 /* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE	0x7F
-#define CONFIG_SYS_I2C_OFFSET	0x3000
-#define CONFIG_SYS_I2C2_OFFSET	0x3100
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C2_SPEED	400000
+#define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+#define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100
 
 /*
  * General PCI
diff --git a/include/configs/mpq101.h b/include/configs/mpq101.h
index 2ab2f8ff19..55d93da598 100644
--- a/include/configs/mpq101.h
+++ b/include/configs/mpq101.h
@@ -205,13 +205,15 @@
 /*
  * I2C buses and peripherals
  */
-#define CONFIG_FSL_I2C         /* Use FSL common I2C driver */
-#define CONFIG_HARD_I2C        /* I2C with hardware support*/
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_SYS_I2C_SPEED   400000 /* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE   0x7f
-#define CONFIG_SYS_I2C_OFFSET  0x3000
-#define CONFIG_SYS_I2C2_OFFSET 0x3100
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+#define CONFIG_SYS_FSL_I2C2_SPEED	400000
+#define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100
+#define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x69} }
 
 /* I2C RTC - M41T81 */
 #define CONFIG_RTC_M41T62
diff --git a/include/configs/neo.h b/include/configs/neo.h
index fede8b8b64..5abb8b1a75 100644
--- a/include/configs/neo.h
+++ b/include/configs/neo.h
@@ -101,7 +101,7 @@
 /*
  * I2C stuff
  */
-#define CONFIG_SYS_I2C_SPEED		100000	/* I2C speed and slave address	*/
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0		100000
 
 /* RTC */
 #define CONFIG_RTC_DS1337
diff --git a/include/configs/nhk8815.h b/include/configs/nhk8815.h
index 1453285f6c..0997f49859 100644
--- a/include/configs/nhk8815.h
+++ b/include/configs/nhk8815.h
@@ -93,8 +93,11 @@
 #ifndef __ASSEMBLY__
 #include <asm/arch/gpio.h>
 #define CONFIG_CMD_I2C
-#define CONFIG_SOFT_I2C
-#define CONFIG_SYS_I2C_SPEED	400000
+#define CONFIG_SYS_I2C
+#define	CONFIG_SYS_I2C_SOFT	1	/* I2C bit-banged	*/
+#define I2C_SOFT_DEFS
+#define CONFIG_SYS_I2C_SOFT_SPEED	400000
+#define CONFIG_SYS_I2C_SOFT_SLAVE	0x7F
 #define __SDA			63
 #define __SCL			62
 #define I2C_SDA(x)		nmk_gpio_set(__SDA, x)
diff --git a/include/configs/ocotea.h b/include/configs/ocotea.h
index 14d00abc62..60ee8da558 100644
--- a/include/configs/ocotea.h
+++ b/include/configs/ocotea.h
@@ -135,7 +135,7 @@
 /*-----------------------------------------------------------------------
  * I2C
  *----------------------------------------------------------------------*/
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address	*/
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0		400000
 
 #define CONFIG_SYS_I2C_MULTI_EEPROMS
 #define CONFIG_SYS_I2C_EEPROM_ADDR	(0xa8>>1)
diff --git a/include/configs/otc570.h b/include/configs/otc570.h
index 76b078fa73..543209cb9d 100644
--- a/include/configs/otc570.h
+++ b/include/configs/otc570.h
@@ -99,14 +99,13 @@
 /* RTC and I2C stuff */
 #define CONFIG_RTC_DS1338
 #define CONFIG_SYS_I2C_RTC_ADDR		0x68
-#undef CONFIG_HARD_I2C
-#define CONFIG_SOFT_I2C
-#define CONFIG_SYS_I2C_SPEED		100000
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-
-#ifdef CONFIG_SOFT_I2C
-# define CONFIG_I2C_CMD_TREE
-# define CONFIG_I2C_MULTI_BUS
+
+#define CONFIG_SYS_I2C
+#define	CONFIG_SYS_I2C_SOFT	/* I2C bit-banged	*/
+#ifdef CONFIG_SYS_I2C_SOFT
+#define CONFIG_SYS_I2C_SOFT_SPEED	100000
+#define CONFIG_SYS_I2C_SOFT_SLAVE	0x7F
+
 /* Configure data and clock pins for pio */
 # define I2C_INIT { \
 	at91_set_pio_output(AT91_PIO_PORTB, 4, 0); \
@@ -124,7 +123,7 @@
 /* Set clock pin */
 # define I2C_SCL(bit)		at91_set_pio_value(AT91_PIO_PORTB, 5, bit)
 # define I2C_DELAY		udelay(2) /* 1/4 I2C clock duration */
-#endif /* CONFIG_SOFT_I2C */
+#endif /* CONFIG_SYS_I2C_SOFT */
 
 /*
  * BOOTP options
diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h
index a061610ac9..1b0be23dd3 100644
--- a/include/configs/p1_p2_rdb_pc.h
+++ b/include/configs/p1_p2_rdb_pc.h
@@ -518,17 +518,16 @@
 #define CONFIG_FIT_VERBOSE	/* enable fit_format_{error,warning}() */
 
 /* I2C */
-#define CONFIG_FSL_I2C			/* Use FSL common I2C driver */
-#define CONFIG_HARD_I2C			/* I2C with hardware support */
-#undef CONFIG_SOFT_I2C			/* I2C bit-banged */
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_I2C_CMD_TREE
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C spd and slave address */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+#define CONFIG_SYS_FSL_I2C2_SPEED	400000
+#define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100
+#define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x29} }
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x52
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_NOPROBES		{{0, 0x29}} /* Don't probe this addr */
-#define CONFIG_SYS_I2C_OFFSET		0x3000
-#define CONFIG_SYS_I2C2_OFFSET		0x3100
 #define CONFIG_SYS_SPD_BUS_NUM		1 /* For rom_loc and flash bank */
 
 /*
diff --git a/include/configs/p3p440.h b/include/configs/p3p440.h
index 09d0e2342f..c4c50932c3 100644
--- a/include/configs/p3p440.h
+++ b/include/configs/p3p440.h
@@ -81,12 +81,12 @@
 /*-----------------------------------------------------------------------
  * I2C
  *----------------------------------------------------------------------*/
-#define CONFIG_HARD_I2C		1	/* I2C with hardware support	*/
-#undef	CONFIG_SOFT_I2C			/* I2C bit-banged		*/
-#define CONFIG_PPC4XX_I2C		/* use PPC4xx driver		*/
-#define CONFIG_SYS_I2C_SPEED		100000	/* I2C speed and slave address	*/
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_NOPROBES	{0x69}	/* Don't probe these addrs	*/
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_PPC4XX
+#define CONFIG_SYS_I2C_PPC4XX_CH0
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0		100000
+#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0		0x7F
+#define CONFIG_SYS_I2C_NOPROBES	{ {0, 0x69} }	/* Don't probe these addrs */
 
 /*-----------------------------------------------------------------------
  * I2C RTC
diff --git a/include/configs/pcs440ep.h b/include/configs/pcs440ep.h
index e4eaa66ebf..5de8e98aca 100644
--- a/include/configs/pcs440ep.h
+++ b/include/configs/pcs440ep.h
@@ -123,11 +123,11 @@
 /*-----------------------------------------------------------------------
  * I2C
  *----------------------------------------------------------------------*/
-#define CONFIG_HARD_I2C		1	    /* I2C with hardware support	*/
-#undef	CONFIG_SOFT_I2C			    /* I2C bit-banged		*/
-#define CONFIG_PPC4XX_I2C		/* use PPC4xx driver		*/
-#define CONFIG_SYS_I2C_SPEED		100000	/* I2C speed and slave address	*/
-#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_PPC4XX
+#define CONFIG_SYS_I2C_PPC4XX_CH0
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0		100000
+#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0		0x7F
 
 #define CONFIG_SYS_I2C_EEPROM_ADDR	(0xa4>>1)
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
diff --git a/include/configs/pdnb3.h b/include/configs/pdnb3.h
index 0a17abc499..c664010067 100644
--- a/include/configs/pdnb3.h
+++ b/include/configs/pdnb3.h
@@ -265,12 +265,10 @@
  */
 
 /* enable I2C and select the hardware/software driver */
-#undef	CONFIG_HARD_I2C			/* I2C with hardware support	*/
-#define	CONFIG_SOFT_I2C		1	/* I2C bit-banged		*/
-
-#define CONFIG_SYS_I2C_SPEED		83000	/* 83 kHz is supposed to work	*/
-#define CONFIG_SYS_I2C_SLAVE		0xFE
-
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT		/* I2C bit-banged */
+#define CONFIG_SYS_I2C_SOFT_SPEED	83000	/* 83 kHz is supposed to work */
+#define CONFIG_SYS_I2C_SOFT_SLAVE	0xFE
 /*
  * Software (bit-bang) I2C driver configuration
  */
diff --git a/include/configs/quad100hd.h b/include/configs/quad100hd.h
index 451a61dd34..a51f2d4faf 100644
--- a/include/configs/quad100hd.h
+++ b/include/configs/quad100hd.h
@@ -136,11 +136,11 @@
 /*-----------------------------------------------------------------------
  * I2C
  *----------------------------------------------------------------------*/
-#define CONFIG_HARD_I2C		1		/* I2C with hardware support	*/
-#undef	CONFIG_SOFT_I2C				/* I2C bit-banged		*/
-#define CONFIG_PPC4XX_I2C		/* use PPC4xx driver		*/
-#define CONFIG_SYS_I2C_SPEED		400000		/* I2C speed and slave address	*/
-#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_PPC4XX
+#define CONFIG_SYS_I2C_PPC4XX_CH0
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0		400000
+#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0		0x7F
 
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x50		/* base address */
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	2		/* bytes of address */
diff --git a/include/configs/redwood.h b/include/configs/redwood.h
index 5ba47bf999..c8bd02e710 100644
--- a/include/configs/redwood.h
+++ b/include/configs/redwood.h
@@ -94,13 +94,13 @@
 /*-----------------------------------------------------------------------
  * I2C
  *----------------------------------------------------------------------*/
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed			*/
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0		400000
 
 #define IIC0_BOOTPROM_ADDR	0x50
 #define IIC0_ALT_BOOTPROM_ADDR	0x54
 
 /* Don't probe these addrs */
-#define CONFIG_SYS_I2C_NOPROBES	{0x50, 0x52, 0x53, 0x54}
+#define CONFIG_SYS_I2C_NOPROBES	{ {0, 0x50}, {0, 0x52}, {0, 0x53}, {0, 0x54} }
 
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	2	/* Bytes of address		*/
 
diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h
index b4c8e40d50..d0fafd7136 100644
--- a/include/configs/s5p_goni.h
+++ b/include/configs/s5p_goni.h
@@ -210,8 +210,10 @@
 #define CONFIG_SOFT_I2C_GPIO_SCL s5pc110_gpio_get_nr(j4, 3)
 #define CONFIG_SOFT_I2C_GPIO_SDA s5pc110_gpio_get_nr(j4, 0)
 
-#define CONFIG_SOFT_I2C	1
-#define CONFIG_SYS_I2C_SPEED	50000
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT		/* I2C bit-banged */
+#define CONFIG_SYS_I2C_SOFT_SPEED	50000
+#define CONFIG_SYS_I2C_SOFT_SLAVE	0x7F
 #define CONFIG_I2C_MULTI_BUS
 #define CONFIG_SYS_MAX_I2C_BUS	7
 #define CONFIG_USB_GADGET
diff --git a/include/configs/s5pc210_universal.h b/include/configs/s5pc210_universal.h
index eab81e7feb..97a4008e36 100644
--- a/include/configs/s5pc210_universal.h
+++ b/include/configs/s5pc210_universal.h
@@ -234,9 +234,11 @@
 #define CONFIG_SOFT_I2C_GPIO_SCL exynos4_gpio_part1_get_nr(b, 7)
 #define CONFIG_SOFT_I2C_GPIO_SDA exynos4_gpio_part1_get_nr(b, 6)
 
-#define CONFIG_SOFT_I2C
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT		/* I2C bit-banged */
+#define CONFIG_SYS_I2C_SOFT_SPEED	50000
+#define CONFIG_SYS_I2C_SOFT_SLAVE	0
 #define CONFIG_SOFT_I2C_READ_REPEATED_START
-#define CONFIG_SYS_I2C_SPEED	50000
 #define CONFIG_I2C_MULTI_BUS
 #define CONFIG_SYS_MAX_I2C_BUS	7
 
diff --git a/include/configs/sacsng.h b/include/configs/sacsng.h
index df20abb68d..d63d0c4f54 100644
--- a/include/configs/sacsng.h
+++ b/include/configs/sacsng.h
@@ -280,15 +280,13 @@
  * If the software driver is chosen, there are some additional
  * configuration items that the driver uses to drive the port pins.
  */
-#undef  CONFIG_HARD_I2C			/* I2C with hardware support	*/
-#define CONFIG_SOFT_I2C		1	/* I2C bit-banged		*/
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address	*/
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT		/* I2C bit-banged */
+#define CONFIG_SYS_I2C_SOFT_SPEED	400000
+#define CONFIG_SYS_I2C_SOFT_SLAVE	0x7F
 /*
  * Software (bit-bang) I2C driver configuration
  */
-#ifdef CONFIG_SOFT_I2C
 #define I2C_PORT	3		/* Port A=0, B=1, C=2, D=3 */
 #define I2C_ACTIVE	(iop->pdir |=  0x00010000)
 #define I2C_TRISTATE	(iop->pdir &= ~0x00010000)
@@ -298,7 +296,6 @@
 #define I2C_SCL(bit)	if(bit) iop->pdat |=  0x00020000; \
 			else    iop->pdat &= ~0x00020000
 #define I2C_DELAY	udelay(20)	/* 1/4 I2C clock duration */
-#endif /* CONFIG_SOFT_I2C */
 
 /* Define this to reserve an entire FLASH sector for
  * environment variables. Otherwise, the environment will be
diff --git a/include/configs/sbc405.h b/include/configs/sbc405.h
index 7a20d4d84c..072f97e602 100644
--- a/include/configs/sbc405.h
+++ b/include/configs/sbc405.h
@@ -152,11 +152,11 @@
 
 #define CONFIG_SYS_RX_ETH_BUFFER	16	/* use 16 rx buffer on 405 emac */
 
-#define CONFIG_HARD_I2C		1	/* I2C with hardware support	*/
-#undef  CONFIG_SOFT_I2C			/* I2C bit-banged		*/
-#define CONFIG_PPC4XX_I2C		/* use PPC4xx driver		*/
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address	*/
-#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_PPC4XX
+#define CONFIG_SYS_I2C_PPC4XX_CH0
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0		400000
+#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0		0x7F
 
 /*-----------------------------------------------------------------------
  * PCI stuff
diff --git a/include/configs/sbc8349.h b/include/configs/sbc8349.h
index afa587eeba..6f912ed2c3 100644
--- a/include/configs/sbc8349.h
+++ b/include/configs/sbc8349.h
@@ -288,15 +288,15 @@
 #define CONFIG_OF_STDOUT_VIA_ALIAS	1
 
 /* I2C */
-#define CONFIG_HARD_I2C			/* I2C with hardware support*/
-#undef CONFIG_SOFT_I2C			/* I2C bit-banged */
-#define CONFIG_FSL_I2C
-#define CONFIG_SYS_I2C_SPEED	400000	/* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE	0x7F
-#define CONFIG_SYS_I2C_NOPROBES	{0x69}	/* Don't probe these addrs */
-#define CONFIG_SYS_I2C1_OFFSET	0x3000
-#define CONFIG_SYS_I2C2_OFFSET	0x3100
-#define CONFIG_SYS_I2C_OFFSET	CONFIG_SYS_I2C2_OFFSET
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+#define CONFIG_SYS_FSL_I2C2_SPEED	400000
+#define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100
+#define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x69}, {1, 0x69} }
 /* could also use CONFIG_I2C_MULTI_BUS and CONFIG_SYS_SPD_BUS_NUM... */
 
 /* TSEC */
diff --git a/include/configs/sbc8548.h b/include/configs/sbc8548.h
index 3aae95e345..84be5246b9 100644
--- a/include/configs/sbc8548.h
+++ b/include/configs/sbc8548.h
@@ -428,13 +428,12 @@
 /*
  * I2C
  */
-#define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
-#define CONFIG_HARD_I2C		/* I2C with hardware support*/
-#undef	CONFIG_SOFT_I2C		/* I2C bit-banged */
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x50
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_OFFSET		0x3000
 
 /*
  * General PCI
diff --git a/include/configs/sbc8641d.h b/include/configs/sbc8641d.h
index d740cfec8a..cf97db94c8 100644
--- a/include/configs/sbc8641d.h
+++ b/include/configs/sbc8641d.h
@@ -273,13 +273,12 @@
 /*
  * I2C
  */
-#define	CONFIG_FSL_I2C		/* Use FSL common I2C driver */
-#define	CONFIG_HARD_I2C		/* I2C with hardware support*/
-#undef	CONFIG_SOFT_I2C			/* I2C bit-banged */
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_NOPROBES        {0x69}	/* Don't probe these addrs */
-#define CONFIG_SYS_I2C_OFFSET		0x3100
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3100
+#define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x69} }
 
 /*
  * RapidIO MMU
diff --git a/include/configs/sc3.h b/include/configs/sc3.h
index 8508c22e03..a96ffbcec3 100644
--- a/include/configs/sc3.h
+++ b/include/configs/sc3.h
@@ -230,16 +230,16 @@
  * IIC stuff
  *-----------------------------------------------------------------------
  */
-#define  CONFIG_HARD_I2C		/* I2C with hardware support	*/
-#undef	CONFIG_SOFT_I2C			/* I2C bit-banged		*/
-#define CONFIG_PPC4XX_I2C		/* use PPC4xx driver		*/
+#define  CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_PPC4XX
+#define CONFIG_SYS_I2C_PPC4XX_CH0
 
 #define I2C_INIT
 #define I2C_ACTIVE 0
 #define I2C_TRISTATE 0
 
-#define CONFIG_SYS_I2C_SPEED		100000	/* use the standard 100kHz speed */
-#define CONFIG_SYS_I2C_SLAVE		0x7F		/* mask valid bits */
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0		100000
+#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0		0x7F	/* mask valid bits */
 
 #define CONFIG_RTC_DS1337
 #define CONFIG_SYS_I2C_RTC_ADDR 0x68
diff --git a/include/configs/seaboard.h b/include/configs/seaboard.h
index c7718579c0..2a24ef3c64 100644
--- a/include/configs/seaboard.h
+++ b/include/configs/seaboard.h
@@ -41,12 +41,11 @@
 #define CONFIG_BOARD_LATE_INIT		/* Make sure LCD init is complete */
 
 /* I2C */
-#define CONFIG_TEGRA_I2C
+#define CONFIG_SYS_I2C_TEGRA
 #define CONFIG_SYS_I2C_INIT_BOARD
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_SYS_MAX_I2C_BUS		4
 #define CONFIG_SYS_I2C_SPEED		100000
 #define CONFIG_CMD_I2C
+#define CONFIG_SYS_I2C
 
 /* SD/MMC */
 #define CONFIG_MMC
diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h
index 44ed7556d4..d2dedac4ed 100644
--- a/include/configs/sequoia.h
+++ b/include/configs/sequoia.h
@@ -219,7 +219,7 @@
 /*
  * I2C
  */
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address	*/
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0		400000
 
 #define CONFIG_SYS_I2C_MULTI_EEPROMS
 #define CONFIG_SYS_I2C_EEPROM_ADDR	(0xa8>>1)
diff --git a/include/configs/snapper9260.h b/include/configs/snapper9260.h
index 383d1ce013..17eb5f2455 100644
--- a/include/configs/snapper9260.h
+++ b/include/configs/snapper9260.h
@@ -90,11 +90,11 @@
 #define CONFIG_SYS_PROMPT		"Snapper> "
 
 /* I2C - Bit-bashed */
-#define CONFIG_SOFT_I2C
-#define CONFIG_SYS_I2C_SPEED		100000
-#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT		/* I2C bit-banged */
+#define CONFIG_SYS_I2C_SOFT_SPEED	100000
+#define CONFIG_SYS_I2C_SOFT_SLAVE	0x7F
 #define CONFIG_SOFT_I2C_READ_REPEATED_START
-#define CONFIG_I2C_MULTI_BUS
 #define I2C_INIT do {							\
 		at91_set_gpio_output(AT91_PIN_PA23, 1);			\
 		at91_set_gpio_output(AT91_PIN_PA24, 1);			\
diff --git a/include/configs/socrates.h b/include/configs/socrates.h
index f5fe550a02..e73f9c174c 100644
--- a/include/configs/socrates.h
+++ b/include/configs/socrates.h
@@ -219,15 +219,14 @@
 /*
  * I2C
  */
-#define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
-#define CONFIG_HARD_I2C			/* I2C with hardware support	*/
-#undef	CONFIG_SOFT_I2C			/* I2C bit-banged		*/
-#define CONFIG_SYS_I2C_SPEED		102124	/* I2C speed and slave address	*/
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_OFFSET		0x3000
-
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_SYS_I2C2_OFFSET		0x3100
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	102124
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+#define CONFIG_SYS_FSL_I2C2_SPEED	102124
+#define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100
 
 /* I2C RTC */
 #define CONFIG_RTC_RX8025		/* Use Epson rx8025 rtc via i2c	*/
diff --git a/include/configs/spc1920.h b/include/configs/spc1920.h
index 6d905dee26..564f3645c9 100644
--- a/include/configs/spc1920.h
+++ b/include/configs/spc1920.h
@@ -194,13 +194,10 @@
  */
 #if defined(CONFIG_CMD_I2C)
 /* enable I2C and select the hardware/software driver */
-#undef CONFIG_HARD_I2C                 /* I2C with hardware support    */
-#define CONFIG_SOFT_I2C                1       /* I2C bit-banged               */
-
-#define CONFIG_SYS_I2C_SPEED          93000   /* 93 kHz is supposed to work   */
-#define CONFIG_SYS_I2C_SLAVE          0xFE
-
-#ifdef CONFIG_SOFT_I2C
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT		/* I2C bit-banged */
+#define CONFIG_SYS_I2C_SOFT_SPEED	93000	/* 93 kHz is supposed to work */
+#define CONFIG_SYS_I2C_SOFT_SLAVE	0xFE
 /*
  * Software (bit-bang) I2C driver configuration
  */
@@ -216,7 +213,6 @@
 #define I2C_SCL(bit)   if(bit) immr->im_cpm.cp_pbdat |=  PB_SCL; \
 		       else    immr->im_cpm.cp_pbdat &= ~PB_SCL
 #define I2C_DELAY      udelay(2)       /* 1/4 I2C clock duration */
-#endif /* CONFIG_SOFT_I2C */
 #endif
 
 /*-----------------------------------------------------------------------
diff --git a/include/configs/stxgp3.h b/include/configs/stxgp3.h
index 80b46a0033..c7689a7290 100644
--- a/include/configs/stxgp3.h
+++ b/include/configs/stxgp3.h
@@ -162,18 +162,18 @@
 /*
  * I2C
  */
-#define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
-#define CONFIG_HARD_I2C		/* I2C with hardware support*/
-#undef	CONFIG_SOFT_I2C			/* I2C bit-banged */
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address	*/
-#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+
 #if 0
 #define CONFIG_SYS_I2C_NOPROBES        {0x00}  /* Don't probe these addrs */
 #else
 /* I did the 'if 0' so we could keep the syntax above if ever needed. */
 #undef CONFIG_SYS_I2C_NOPROBES
 #endif
-#define CONFIG_SYS_I2C_OFFSET		0x3000
 
 /* RapdIO Map configuration, mapped 1:1.
 */
diff --git a/include/configs/stxssa.h b/include/configs/stxssa.h
index fc0252339e..f5f7f54348 100644
--- a/include/configs/stxssa.h
+++ b/include/configs/stxssa.h
@@ -182,13 +182,12 @@
 /*
  * I2C
  */
-#define CONFIG_FSL_I2C			/* Use FSL common I2C driver */
-#define  CONFIG_HARD_I2C		/* I2C with hardware support*/
-#undef	CONFIG_SOFT_I2C			/* I2C bit-banged */
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address	*/
-#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
 #undef CONFIG_SYS_I2C_NOPROBES
-#define CONFIG_SYS_I2C_OFFSET		0x3000
 
 /* I2C RTC */
 #define CONFIG_RTC_DS1337		/* This is really a DS1339 RTC	*/
diff --git a/include/configs/t3corp.h b/include/configs/t3corp.h
index ce65e39daf..9ab99244cf 100644
--- a/include/configs/t3corp.h
+++ b/include/configs/t3corp.h
@@ -306,7 +306,7 @@
 /*
  * I2C
  */
-#define CONFIG_SYS_I2C_SPEED			400000	/* I2C speed */
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0			400000
 
 #define CONFIG_SYS_I2C_MULTI_EEPROMS
 #define CONFIG_SYS_I2C_EEPROM_ADDR		(0xa8>>1)
diff --git a/include/configs/t4qds.h b/include/configs/t4qds.h
index 0344d0d973..1ed53dbbb1 100644
--- a/include/configs/t4qds.h
+++ b/include/configs/t4qds.h
@@ -429,14 +429,15 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_FIT_VERBOSE	/* enable fit_format_{error,warning}() */
 
 /* I2C */
-#define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
-#define CONFIG_HARD_I2C		/* I2C with hardware support */
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_I2C_CMD_TREE
-#define CONFIG_SYS_I2C_SPEED		100000	/* I2C speed */
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_OFFSET		0x118000
-#define CONFIG_SYS_I2C2_OFFSET		0x118100
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	100000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x118000
+#define CONFIG_SYS_FSL_I2C2_SPEED	100000
+#define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C2_OFFSET	0x118100
+
 #define I2C_MUX_PCA_ADDR_PRI		0x77 /* I2C bus multiplexer,primary */
 #define I2C_MUX_PCA_ADDR_SEC		0x76 /* I2C bus multiplexer,secondary */
 
diff --git a/include/configs/taihu.h b/include/configs/taihu.h
index ac8e57a93e..e8d191e7f9 100644
--- a/include/configs/taihu.h
+++ b/include/configs/taihu.h
@@ -122,9 +122,9 @@
  * I2C stuff
  *-----------------------------------------------------------------------
  */
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address	*/
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0		400000
 
-#define CONFIG_SYS_I2C_NOPROBES	{ 0x69 } /* avoid i2c probe hangup (why?) */
+#define CONFIG_SYS_I2C_NOPROBES	{ {0, 0x69} } /* avoid i2c probe hangup (?) */
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	6 /* 24C02 requires 5ms delay */
 
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* I2C boot EEPROM (24C02W)	*/
diff --git a/include/configs/taishan.h b/include/configs/taishan.h
index 6dbed7d2d8..3dbfc6ad1d 100644
--- a/include/configs/taishan.h
+++ b/include/configs/taishan.h
@@ -120,7 +120,7 @@
 /*-----------------------------------------------------------------------
  * I2C
  *----------------------------------------------------------------------*/
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address	*/
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0		400000
 
 #undef CONFIG_SYS_I2C_MULTI_EEPROMS
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x50
diff --git a/include/configs/tegra-common-post.h b/include/configs/tegra-common-post.h
index 21ca4bbd44..a3242fe612 100644
--- a/include/configs/tegra-common-post.h
+++ b/include/configs/tegra-common-post.h
@@ -149,8 +149,8 @@
 #endif
 
 /* remove I2C support */
-#ifdef CONFIG_TEGRA_I2C
-#undef CONFIG_TEGRA_I2C
+#ifdef CONFIG_SYS_I2C_TEGRA
+#undef CONFIG_SYS_I2C_TEGRA
 #endif
 #ifdef CONFIG_CMD_I2C
 #undef CONFIG_CMD_I2C
diff --git a/include/configs/top9000.h b/include/configs/top9000.h
index ba5b6071d2..65dabde54f 100644
--- a/include/configs/top9000.h
+++ b/include/configs/top9000.h
@@ -185,11 +185,12 @@
 #define CONFIG_CMD_USB
 
 /* I2C support must always be enabled */
-#define CONFIG_SOFT_I2C
 #define CONFIG_CMD_I2C
-#define CONFIG_SYS_I2C_SPEED		400000
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT		/* I2C bit-banged */
+#define CONFIG_SYS_I2C_SOFT_SPEED	400000
+#define CONFIG_SYS_I2C_SOFT_SLAVE	0x7F
+
 #define I2C0_PORT			AT91_PIO_PORTA
 #define SDA0_PIN			23
 #define SCL0_PIN			24
diff --git a/include/configs/trats.h b/include/configs/trats.h
index 465ade6f02..9b6aac96e6 100644
--- a/include/configs/trats.h
+++ b/include/configs/trats.h
@@ -259,10 +259,12 @@
 #define CONFIG_SYS_INIT_SP_ADDR	(CONFIG_SYS_LOAD_ADDR - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_CACHELINE_SIZE       32
 
-#define CONFIG_SOFT_I2C
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT		/* I2C bit-banged */
+#define CONFIG_SYS_I2C_SOFT_SPEED	50000
+#define CONFIG_SYS_I2C_SOFT_SLAVE	0xFE
 #define CONFIG_SOFT_I2C_READ_REPEATED_START
 #define CONFIG_SYS_I2C_INIT_BOARD
-#define CONFIG_SYS_I2C_SPEED	50000
 #define CONFIG_I2C_MULTI_BUS
 #define CONFIG_SOFT_I2C_MULTI_BUS
 #define CONFIG_SYS_MAX_I2C_BUS	15
diff --git a/include/configs/trimslice.h b/include/configs/trimslice.h
index 9567cc6e96..8e03f6f4c4 100644
--- a/include/configs/trimslice.h
+++ b/include/configs/trimslice.h
@@ -38,12 +38,11 @@
 #define CONFIG_CMD_SF
 
 /* I2C */
-#define CONFIG_TEGRA_I2C
+#define CONFIG_SYS_I2C_TEGRA
 #define CONFIG_SYS_I2C_INIT_BOARD
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_SYS_MAX_I2C_BUS		4
 #define CONFIG_SYS_I2C_SPEED		100000
 #define CONFIG_CMD_I2C
+#define CONFIG_SYS_I2C
 
 /* SD/MMC */
 #define CONFIG_MMC
diff --git a/include/configs/u8500_href.h b/include/configs/u8500_href.h
index 8277f8d388..0c97ab1894 100644
--- a/include/configs/u8500_href.h
+++ b/include/configs/u8500_href.h
@@ -150,7 +150,6 @@
  */
 #define CONFIG_U8500_I2C
 #undef	CONFIG_HARD_I2C			/* I2C with hardware support */
-#undef	CONFIG_SOFT_I2C			/* I2C bit-banged */
 #define CONFIG_I2C_MULTI_BUS
 #define CONFIG_SYS_I2C_SPEED		100000
 #define CONFIG_SYS_I2C_SLAVE		0	/* slave addr of controller */
diff --git a/include/configs/uc100.h b/include/configs/uc100.h
index 43acf26679..8bf7353bc1 100644
--- a/include/configs/uc100.h
+++ b/include/configs/uc100.h
@@ -448,13 +448,10 @@
  */
 
 /* enable I2C and select the hardware/software driver */
-#undef	CONFIG_HARD_I2C			/* I2C with hardware support	*/
-#define	CONFIG_SOFT_I2C         1	/* I2C bit-banged		*/
-
-#define CONFIG_SYS_I2C_SPEED		93000	/* 93 kHz is supposed to work	*/
-#define CONFIG_SYS_I2C_SLAVE		0xFE
-
-#ifdef CONFIG_SOFT_I2C
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT		/* I2C bit-banged */
+#define CONFIG_SYS_I2C_SOFT_SPEED	93000 /* 93 kHz is supposed to work */
+#define CONFIG_SYS_I2C_SOFT_SLAVE	0xFE
 /*
  * Software (bit-bang) I2C driver configuration
  */
@@ -470,7 +467,6 @@
 #define I2C_SCL(bit)	if(bit) immr->im_cpm.cp_pbdat |=  PB_SCL; \
 			else    immr->im_cpm.cp_pbdat &= ~PB_SCL
 #define I2C_DELAY	udelay(2)	/* 1/4 I2C clock duration */
-#endif	/* CONFIG_SOFT_I2C */
 
 /*-----------------------------------------------------------------------
  * I2C EEPROM (24C164)
diff --git a/include/configs/utx8245.h b/include/configs/utx8245.h
index 3088409271..bf044456ce 100644
--- a/include/configs/utx8245.h
+++ b/include/configs/utx8245.h
@@ -219,8 +219,7 @@ protect on ${u-boot_startaddr} ${u-boot_endaddr}"
  *------------------------------------------------------------------*/
 #if 1
 #define CONFIG_HARD_I2C		1		/* To enable I2C support	*/
-#undef  CONFIG_SOFT_I2C				/* I2C bit-banged		*/
-#define CONFIG_SYS_I2C_SPEED		400000		/* I2C speed and slave address	*/
+#define CONFIG_SYS_I2C_SPEED		400000
 #define CONFIG_SYS_I2C_SLAVE		0x7F
 #endif
 
diff --git a/include/configs/vct.h b/include/configs/vct.h
index 8258ccd815..85a6c11137 100644
--- a/include/configs/vct.h
+++ b/include/configs/vct.h
@@ -232,11 +232,10 @@
 /*
  * I2C/EEPROM
  */
-#undef	CONFIG_HARD_I2C			/* I2C with hardware support	*/
-#define	CONFIG_SOFT_I2C			/* I2C bit-banged		*/
-
-#define CONFIG_SYS_I2C_SPEED		83000	/* 83 kHz is supposed to work	*/
-#define CONFIG_SYS_I2C_SLAVE		0x7f
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT		/* I2C bit-banged */
+#define CONFIG_SYS_I2C_SOFT_SPEED	83000	/* 83 kHz is supposed to work */
+#define CONFIG_SYS_I2C_SOFT_SLAVE	0x7f
 
 /*
  * Software (bit-bang) I2C driver configuration
@@ -324,7 +323,7 @@ int vct_gpio_get(int pin);
 #undef CONFIG_CMD_USB
 
 #undef CONFIG_SMC911X
-#undef CONFIG_SOFT_I2C
+#undef CONFIG_SYS_I2C_SOFT
 #undef CONFIG_SOURCE
 #undef CONFIG_SYS_LONGHELP
 #undef CONFIG_TIMESTAMP
diff --git a/include/configs/vf610twr.h b/include/configs/vf610twr.h
index 223321c6d3..5a7a066377 100644
--- a/include/configs/vf610twr.h
+++ b/include/configs/vf610twr.h
@@ -68,6 +68,13 @@
 #define CONFIG_PHYLIB
 #define CONFIG_PHY_MICREL
 
+/* I2C Configs */
+#define CONFIG_CMD_I2C
+#define CONFIG_HARD_I2C
+#define CONFIG_I2C_MXC
+#define CONFIG_SYS_I2C_BASE		I2C0_BASE_ADDR
+#define CONFIG_SYS_I2C_SPEED		100000
+
 #define CONFIG_BOOTDELAY		3
 
 #define CONFIG_LOADADDR			0x82000000
diff --git a/include/configs/vl_ma2sc.h b/include/configs/vl_ma2sc.h
index 817d36f17e..e171ae4c40 100644
--- a/include/configs/vl_ma2sc.h
+++ b/include/configs/vl_ma2sc.h
@@ -131,10 +131,12 @@
 #define CONFIG_SYS_I2C_SLAVE			0		/* not used */
 
 #ifndef CONFIG_HARD_I2C
-#define CONFIG_SOFT_I2C
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT			/* I2C bit-banged */
+#define CONFIG_SYS_I2C_SOFT_SPEED	CONFIG_SYS_I2C_SPEED
+#define CONFIG_SYS_I2C_SOFT_SLAVE	CONFIG_SYS_I2C_SLAVE
 
 /* Software  I2C driver configuration */
-
 #define I2C_DELAY	udelay(2500000/CONFIG_SYS_I2C_SPEED)
 
 #define AT91_PIN_SDA	(1<<4)		/* AT91C_PIO_PB4 */
diff --git a/include/configs/vme8349.h b/include/configs/vme8349.h
index 0cd838e192..b450ab5e17 100644
--- a/include/configs/vme8349.h
+++ b/include/configs/vme8349.h
@@ -221,17 +221,15 @@
 #define CONFIG_OF_STDOUT_VIA_ALIAS
 
 /* I2C */
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_HARD_I2C		/* I2C with hardware support*/
-#undef CONFIG_SOFT_I2C		/* I2C bit-banged */
-#define CONFIG_FSL_I2C
-#define CONFIG_I2C_CMD_TREE
-#define CONFIG_SYS_I2C_SPEED	400000	/* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE	0x7F
-#define CONFIG_SYS_I2C_NOPROBES	{ {0, 0x69} } /* Don't probe these addrs */
-#define CONFIG_SYS_I2C1_OFFSET	0x3000
-#define CONFIG_SYS_I2C2_OFFSET	0x3100
-#define CONFIG_SYS_I2C_OFFSET	CONFIG_SYS_I2C1_OFFSET
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+#define CONFIG_SYS_FSL_I2C2_SPEED	400000
+#define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100
+#define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x69} }
 /* could also use CONFIG_I2C_MULTI_BUS and CONFIG_SYS_SPD_BUS_NUM... */
 
 #define CONFIG_SYS_I2C_8574_ADDR2       0x20    /* I2C1, PCF8574 */
diff --git a/include/configs/walnut.h b/include/configs/walnut.h
index e24295cf14..b23824bd0a 100644
--- a/include/configs/walnut.h
+++ b/include/configs/walnut.h
@@ -79,7 +79,7 @@
  * I2C stuff
  *-----------------------------------------------------------------------
  */
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address	*/
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0		400000
 
 #define CONFIG_SYS_I2C_MULTI_EEPROMS
 #define CONFIG_SYS_I2C_EEPROM_ADDR	(0xa8>>1)
diff --git a/include/configs/whistler.h b/include/configs/whistler.h
index ed3eda1f0f..d5c7e3bbd6 100644
--- a/include/configs/whistler.h
+++ b/include/configs/whistler.h
@@ -30,12 +30,11 @@
 #define CONFIG_BOARD_EARLY_INIT_F
 
 /* I2C */
-#define CONFIG_TEGRA_I2C
+#define CONFIG_SYS_I2C_TEGRA
 #define CONFIG_SYS_I2C_INIT_BOARD
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_SYS_MAX_I2C_BUS		4
 #define CONFIG_SYS_I2C_SPEED		100000
 #define CONFIG_CMD_I2C
+#define CONFIG_SYS_I2C
 
 /* SD/MMC */
 #define CONFIG_MMC
diff --git a/include/configs/xpedite1000.h b/include/configs/xpedite1000.h
index 28af3cba5a..ea270509c1 100644
--- a/include/configs/xpedite1000.h
+++ b/include/configs/xpedite1000.h
@@ -129,11 +129,11 @@ extern void out32(unsigned int, unsigned long);
 /*
  * I2C
  */
-#define CONFIG_HARD_I2C			1	/* I2C with hardware support */
-#define CONFIG_PPC4XX_I2C		/* use PPC4xx driver		*/
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE		0x7f
-#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_PPC4XX
+#define CONFIG_SYS_I2C_PPC4XX_CH0
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0		400000
+#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0		0x7f
 
 /* I2C EEPROM */
 #define CONFIG_SYS_I2C_EEPROM_ADDR		0x50
diff --git a/include/configs/xpedite517x.h b/include/configs/xpedite517x.h
index 51bdd095eb..97ce3eb542 100644
--- a/include/configs/xpedite517x.h
+++ b/include/configs/xpedite517x.h
@@ -242,13 +242,14 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 /*
  * I2C
  */
-#define CONFIG_FSL_I2C				/* Use FSL common I2C driver */
-#define CONFIG_HARD_I2C				/* I2C with hardware support */
-#define CONFIG_SYS_I2C_SPEED		100000	/* M41T00 only supports 100 KHz */
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_OFFSET		0x3000
-#define CONFIG_SYS_I2C2_OFFSET		0x3100
-#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	100000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+#define CONFIG_SYS_FSL_I2C2_SPEED	100000
+#define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100
 
 /* PEX8518 slave I2C interface */
 #define CONFIG_SYS_I2C_PEX8518_ADDR	0x70
diff --git a/include/configs/xpedite520x.h b/include/configs/xpedite520x.h
index c20935dfcf..372135a89f 100644
--- a/include/configs/xpedite520x.h
+++ b/include/configs/xpedite520x.h
@@ -204,13 +204,14 @@
 /*
  * I2C
  */
-#define CONFIG_FSL_I2C				/* Use FSL common I2C driver */
-#define CONFIG_HARD_I2C				/* I2C with hardware support */
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_OFFSET		0x3000
-#define CONFIG_SYS_I2C2_OFFSET		0x3100
-#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+#define CONFIG_SYS_FSL_I2C2_SPEED	400000
+#define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100
 
 /* I2C EEPROM */
 #define CONFIG_SYS_I2C_EEPROM_ADDR		0x50
diff --git a/include/configs/xpedite537x.h b/include/configs/xpedite537x.h
index 6cf35f3105..31330eaa30 100644
--- a/include/configs/xpedite537x.h
+++ b/include/configs/xpedite537x.h
@@ -242,13 +242,15 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 /*
  * I2C
  */
-#define CONFIG_FSL_I2C				/* Use FSL common I2C driver */
-#define CONFIG_HARD_I2C				/* I2C with hardware support */
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_OFFSET		0x3000
-#define CONFIG_SYS_I2C2_OFFSET		0x3100
-#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+#define CONFIG_SYS_FSL_I2C2_SPEED	400000
+#define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100
+#define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x69} }
 
 /* PEX8518 slave I2C interface */
 #define CONFIG_SYS_I2C_PEX8518_ADDR	0x70
diff --git a/include/configs/xpedite550x.h b/include/configs/xpedite550x.h
index 5a4125193a..340d4be4c6 100644
--- a/include/configs/xpedite550x.h
+++ b/include/configs/xpedite550x.h
@@ -234,13 +234,14 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 /*
  * I2C
  */
-#define CONFIG_FSL_I2C				/* Use FSL common I2C driver */
-#define CONFIG_HARD_I2C				/* I2C with hardware support */
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_OFFSET		0x3000
-#define CONFIG_SYS_I2C2_OFFSET		0x3100
-#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+#define CONFIG_SYS_FSL_I2C2_SPEED	400000
+#define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100
 
 /* I2C DS7505 temperature sensor */
 #define CONFIG_DTT_LM75
diff --git a/include/configs/yosemite.h b/include/configs/yosemite.h
index 2c1de321bb..4d3abf08bd 100644
--- a/include/configs/yosemite.h
+++ b/include/configs/yosemite.h
@@ -121,7 +121,7 @@
 /*-----------------------------------------------------------------------
  * I2C
  *----------------------------------------------------------------------*/
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address	*/
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0		400000
 
 #define CONFIG_SYS_I2C_MULTI_EEPROMS
 #define CONFIG_SYS_I2C_EEPROM_ADDR	(0xa8>>1)
diff --git a/include/configs/yucca.h b/include/configs/yucca.h
index e3b0840ced..5d584fbad4 100644
--- a/include/configs/yucca.h
+++ b/include/configs/yucca.h
@@ -104,13 +104,13 @@
 /*-----------------------------------------------------------------------
  * I2C
  *----------------------------------------------------------------------*/
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address	*/
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0		400000
 
 #define IIC0_BOOTPROM_ADDR	0x50
 #define IIC0_ALT_BOOTPROM_ADDR	0x54
 
 /* Don't probe these addrs */
-#define CONFIG_SYS_I2C_NOPROBES	{0x50, 0x52, 0x53, 0x54}
+#define CONFIG_SYS_I2C_NOPROBES	{ {0, 0x50}, {0, 0x52}, {0, 0x53}, {0, 0x54} }
 
 /* #if defined(CONFIG_CMD_EEPROM) */
 /* #define CONFIG_SYS_I2C_EEPROM_ADDR	0x50 */	/* I2C boot EEPROM		*/
diff --git a/include/configs/zeus.h b/include/configs/zeus.h
index 04448d6261..386f9deb70 100644
--- a/include/configs/zeus.h
+++ b/include/configs/zeus.h
@@ -152,11 +152,11 @@
 /*-----------------------------------------------------------------------
  * I2C
  *----------------------------------------------------------------------*/
-#define CONFIG_HARD_I2C		1		/* I2C with hardware support	*/
-#undef	CONFIG_SOFT_I2C				/* I2C bit-banged		*/
-#define CONFIG_PPC4XX_I2C		/* use PPC4xx driver		*/
-#define CONFIG_SYS_I2C_SPEED		400000		/* I2C speed and slave address	*/
-#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_PPC4XX
+#define CONFIG_SYS_I2C_PPC4XX_CH0
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0		400000
+#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0		0x7F
 
 /* these are for the ST M24C02 2kbit serial i2c eeprom */
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x50		/* base address */
diff --git a/include/fdtdec.h b/include/fdtdec.h
index f2ac13bee8..6bf83bf7c1 100644
--- a/include/fdtdec.h
+++ b/include/fdtdec.h
@@ -84,6 +84,7 @@ enum fdt_compat_id {
 	COMPAT_MAXIM_98095_CODEC,	/* MAX98095 Codec */
 	COMPAT_INFINEON_SLB9635_TPM,	/* Infineon SLB9635 TPM */
 	COMPAT_INFINEON_SLB9645_TPM,	/* Infineon SLB9645 TPM */
+	COMPAT_SAMSUNG_EXYNOS5_I2C,	/* Exynos5 High Speed I2C Controller */
 
 	COMPAT_COUNT,
 };
diff --git a/include/i2c.h b/include/i2c.h
index bbea29b47e..d8674efe58 100644
--- a/include/i2c.h
+++ b/include/i2c.h
@@ -1,4 +1,8 @@
 /*
+ * Copyright (C) 2009 Sergey Kubushyn <ksi@koi8.net>
+ * Copyright (C) 2009 - 2013 Heiko Schocher <hs@denx.de>
+ * Changes for multibus/multiadapter I2C support.
+ *
  * (C) Copyright 2001
  * Gerald Van Baren, Custom IDEAS, vanbaren@cideas.com.
  *
@@ -30,16 +34,14 @@
  */
 #define I2C_RXTX_LEN	128	/* maximum tx/rx buffer length */
 
-#ifdef	CONFIG_I2C_MULTI_BUS
-#define	MAX_I2C_BUS			2
-#define	I2C_MULTI_BUS			1
+#if !defined(CONFIG_SYS_I2C_MAX_HOPS)
+/* no muxes used bus = i2c adapters */
+#define CONFIG_SYS_I2C_DIRECT_BUS	1
+#define CONFIG_SYS_I2C_MAX_HOPS		0
+#define CONFIG_SYS_NUM_I2C_BUSES	ll_entry_count(struct i2c_adapter, i2c)
 #else
-#define	MAX_I2C_BUS			1
-#define	I2C_MULTI_BUS			0
-#endif
-
-#if !defined(CONFIG_SYS_MAX_I2C_BUS)
-#define CONFIG_SYS_MAX_I2C_BUS		MAX_I2C_BUS
+/* we use i2c muxes */
+#undef CONFIG_SYS_I2C_DIRECT_BUS
 #endif
 
 /* define the I2C bus number for RTC and DTT if not already done */
@@ -53,6 +55,88 @@
 #define CONFIG_SYS_SPD_BUS_NUM		0
 #endif
 
+struct i2c_adapter {
+	void		(*init)(struct i2c_adapter *adap, int speed,
+				int slaveaddr);
+	int		(*probe)(struct i2c_adapter *adap, uint8_t chip);
+	int		(*read)(struct i2c_adapter *adap, uint8_t chip,
+				uint addr, int alen, uint8_t *buffer,
+				int len);
+	int		(*write)(struct i2c_adapter *adap, uint8_t chip,
+				uint addr, int alen, uint8_t *buffer,
+				int len);
+	uint		(*set_bus_speed)(struct i2c_adapter *adap,
+				uint speed);
+	int		speed;
+	int		slaveaddr;
+	int		init_done;
+	int		hwadapnr;
+	char		*name;
+};
+
+#define U_BOOT_I2C_MKENT_COMPLETE(_init, _probe, _read, _write, \
+		_set_speed, _speed, _slaveaddr, _hwadapnr, _name) \
+	{ \
+		.init		=	_init, \
+		.probe		=	_probe, \
+		.read		=	_read, \
+		.write		=	_write, \
+		.set_bus_speed	=	_set_speed, \
+		.speed		=	_speed, \
+		.slaveaddr	=	_slaveaddr, \
+		.init_done	=	0, \
+		.hwadapnr	=	_hwadapnr, \
+		.name		=	#_name \
+};
+
+#define U_BOOT_I2C_ADAP_COMPLETE(_name, _init, _probe, _read, _write, \
+			_set_speed, _speed, _slaveaddr, _hwadapnr) \
+	ll_entry_declare(struct i2c_adapter, _name, i2c) = \
+	U_BOOT_I2C_MKENT_COMPLETE(_init, _probe, _read, _write, \
+		 _set_speed, _speed, _slaveaddr, _hwadapnr, _name);
+
+struct i2c_adapter *i2c_get_adapter(int index);
+
+#ifndef CONFIG_SYS_I2C_DIRECT_BUS
+struct i2c_mux {
+	int	id;
+	char	name[16];
+};
+
+struct i2c_next_hop {
+	struct i2c_mux		mux;
+	uint8_t		chip;
+	uint8_t		channel;
+};
+
+struct i2c_bus_hose {
+	int	adapter;
+	struct i2c_next_hop	next_hop[CONFIG_SYS_I2C_MAX_HOPS];
+};
+#define I2C_NULL_HOP	{{-1, ""}, 0, 0}
+extern struct i2c_bus_hose	i2c_bus[];
+
+#define I2C_ADAPTER(bus)	i2c_bus[bus].adapter
+#else
+#define I2C_ADAPTER(bus)	bus
+#endif
+#define	I2C_BUS			gd->cur_i2c_bus
+
+#define	I2C_ADAP_NR(bus)	i2c_get_adapter(I2C_ADAPTER(bus))
+#define	I2C_ADAP		I2C_ADAP_NR(gd->cur_i2c_bus)
+#define I2C_ADAP_HWNR		(I2C_ADAP->hwadapnr)
+
+#ifndef CONFIG_SYS_I2C_DIRECT_BUS
+#define I2C_MUX_PCA9540_ID	1
+#define I2C_MUX_PCA9540		{I2C_MUX_PCA9540_ID, "PCA9540B"}
+#define I2C_MUX_PCA9542_ID	2
+#define I2C_MUX_PCA9542		{I2C_MUX_PCA9542_ID, "PCA9542A"}
+#define I2C_MUX_PCA9544_ID	3
+#define I2C_MUX_PCA9544		{I2C_MUX_PCA9544_ID, "PCA9544A"}
+#define I2C_MUX_PCA9547_ID	4
+#define I2C_MUX_PCA9547		{I2C_MUX_PCA9547_ID, "PCA9547A"}
+#endif
+
 #ifndef I2C_SOFT_DECLARATIONS
 # if defined(CONFIG_MPC8260)
 #  define I2C_SOFT_DECLARATIONS volatile ioport_t *iop = ioport_addr((immap_t *)CONFIG_SYS_IMMR, I2C_PORT);
@@ -97,26 +181,103 @@ void i2c_init_board(void);
 void i2c_board_late_init(void);
 #endif
 
-#if defined(CONFIG_I2C_MUX)
-
-typedef struct _mux {
-	uchar	chip;
-	uchar	channel;
-	char	*name;
-	struct _mux	*next;
-} I2C_MUX;
-
-typedef struct _mux_device {
-	int	busid;
-	I2C_MUX	*mux;	/* List of muxes, to reach the device */
-	struct _mux_device	*next;
-} I2C_MUX_DEVICE;
-
-I2C_MUX_DEVICE	*i2c_mux_search_device(int id);
-I2C_MUX_DEVICE *i2c_mux_ident_muxstring (uchar *buf);
-int i2x_mux_select_mux(int bus);
-int i2c_mux_ident_muxstring_f (uchar *buf);
+#ifdef CONFIG_SYS_I2C
+/*
+ * i2c_get_bus_num:
+ *
+ *  Returns index of currently active I2C bus.  Zero-based.
+ */
+unsigned int i2c_get_bus_num(void);
+
+/*
+ * i2c_set_bus_num:
+ *
+ *  Change the active I2C bus.  Subsequent read/write calls will
+ *  go to this one.
+ *
+ *	bus - bus index, zero based
+ *
+ *	Returns: 0 on success, not 0 on failure
+ *
+ */
+int i2c_set_bus_num(unsigned int bus);
+
+/*
+ * i2c_init_all():
+ *
+ * Initializes all I2C adapters in the system. All i2c_adap structures must
+ * be initialized beforehead with function pointers and data, including
+ * speed and slaveaddr. Returns 0 on success, non-0 on failure.
+ */
+void i2c_init_all(void);
+
+/*
+ * Probe the given I2C chip address.  Returns 0 if a chip responded,
+ * not 0 on failure.
+ */
+int i2c_probe(uint8_t chip);
+
+/*
+ * Read/Write interface:
+ *   chip:    I2C chip address, range 0..127
+ *   addr:    Memory (register) address within the chip
+ *   alen:    Number of bytes to use for addr (typically 1, 2 for larger
+ *              memories, 0 for register type devices with only one
+ *              register)
+ *   buffer:  Where to read/write the data
+ *   len:     How many bytes to read/write
+ *
+ *   Returns: 0 on success, not 0 on failure
+ */
+int i2c_read(uint8_t chip, unsigned int addr, int alen,
+				uint8_t *buffer, int len);
+
+int i2c_write(uint8_t chip, unsigned int addr, int alen,
+				uint8_t *buffer, int len);
+
+/*
+ * Utility routines to read/write registers.
+ */
+uint8_t i2c_reg_read(uint8_t addr, uint8_t reg);
+
+void i2c_reg_write(uint8_t addr, uint8_t reg, uint8_t val);
+
+/*
+ * i2c_set_bus_speed:
+ *
+ *  Change the speed of the active I2C bus
+ *
+ *	speed - bus speed in Hz
+ *
+ *	Returns: new bus speed
+ *
+ */
+unsigned int i2c_set_bus_speed(unsigned int speed);
+
+/*
+ * i2c_get_bus_speed:
+ *
+ *  Returns speed of currently active I2C bus in Hz
+ */
+
+unsigned int i2c_get_bus_speed(void);
+
+/*
+ * i2c_reloc_fixup:
+ *
+ * Adjusts I2C pointers after U-Boot is relocated to DRAM
+ */
+void i2c_reloc_fixup(void);
+#if defined(CONFIG_SYS_I2C_SOFT)
+void i2c_soft_init(void);
+void i2c_soft_active(void);
+void i2c_soft_tristate(void);
+int i2c_soft_read(void);
+void i2c_soft_sda(int bit);
+void i2c_soft_scl(int bit);
+void i2c_soft_delay(void);
 #endif
+#else
 
 /*
  * Probe the given I2C chip address.  Returns 0 if a chip responded,
@@ -219,6 +380,21 @@ int i2c_set_bus_speed(unsigned int);
  */
 
 unsigned int i2c_get_bus_speed(void);
+#endif /* CONFIG_SYS_I2C */
+
+/*
+ * only for backwardcompatibility, should go away if we switched
+ * completely to new multibus support.
+ */
+#if defined(CONFIG_SYS_I2C) || defined(CONFIG_I2C_MULTI_BUS)
+# if !defined(CONFIG_SYS_MAX_I2C_BUS)
+#  define CONFIG_SYS_MAX_I2C_BUS		2
+# endif
+# define I2C_MULTI_BUS				0
+#else
+# define CONFIG_SYS_MAX_I2C_BUS		1
+# define I2C_MULTI_BUS				0
+#endif
 
 /* NOTE: These two functions MUST be always_inline to avoid code growth! */
 static inline unsigned int I2C_GET_BUS(void) __attribute__((always_inline));
diff --git a/lib/fdtdec.c b/lib/fdtdec.c
index 5952450b96..dc358562d1 100644
--- a/lib/fdtdec.c
+++ b/lib/fdtdec.c
@@ -57,6 +57,7 @@ static const char * const compat_names[COMPAT_COUNT] = {
 	COMPAT(MAXIM_98095_CODEC, "maxim,max98095-codec"),
 	COMPAT(INFINEON_SLB9635_TPM, "infineon,slb9635-tpm"),
 	COMPAT(INFINEON_SLB9645_TPM, "infineon,slb9645-tpm"),
+	COMPAT(SAMSUNG_EXYNOS5_I2C, "samsung,exynos5-hsi2c"),
 };
 
 const char *fdtdec_get_compatible(enum fdt_compat_id id)