diff options
Diffstat (limited to 'drivers/i2c/fti2c010.h')
| -rw-r--r-- | drivers/i2c/fti2c010.h | 81 |
1 files changed, 81 insertions, 0 deletions
diff --git a/drivers/i2c/fti2c010.h b/drivers/i2c/fti2c010.h new file mode 100644 index 0000000000..18aec2c976 --- /dev/null +++ b/drivers/i2c/fti2c010.h @@ -0,0 +1,81 @@ +/* + * Faraday I2C Controller + * + * (C) Copyright 2010 Faraday Technology + * Dante Su <dantesu@faraday-tech.com> + * + * This file is released under the terms of GPL v2 and any later version. + * See the file COPYING in the root directory of the source tree for details. + */ + +#ifndef __FTI2C010_H +#define __FTI2C010_H + +/* + * FTI2C010 registers + */ +struct fti2c010_regs { + uint32_t cr; /* 0x00: control register */ + uint32_t sr; /* 0x04: status register */ + uint32_t cdr; /* 0x08: clock division register */ + uint32_t dr; /* 0x0c: data register */ + uint32_t sar; /* 0x10: slave address register */ + uint32_t tgsr;/* 0x14: time & glitch suppression register */ + uint32_t bmr; /* 0x18: bus monitor register */ + uint32_t rsvd[5]; + uint32_t revr;/* 0x30: revision register */ +}; + +/* + * control register + */ +#define CR_ALIRQ 0x2000 /* arbitration lost interrupt (master) */ +#define CR_SAMIRQ 0x1000 /* slave address match interrupt (slave) */ +#define CR_STOPIRQ 0x800 /* stop condition interrupt (slave) */ +#define CR_NAKRIRQ 0x400 /* NACK response interrupt (master) */ +#define CR_DRIRQ 0x200 /* rx interrupt (both) */ +#define CR_DTIRQ 0x100 /* tx interrupt (both) */ +#define CR_TBEN 0x80 /* tx enable (both) */ +#define CR_NAK 0x40 /* NACK (both) */ +#define CR_STOP 0x20 /* stop (master) */ +#define CR_START 0x10 /* start (master) */ +#define CR_GCEN 0x8 /* general call support (slave) */ +#define CR_SCLEN 0x4 /* enable clock out (master) */ +#define CR_I2CEN 0x2 /* enable I2C (both) */ +#define CR_I2CRST 0x1 /* reset I2C (both) */ +#define CR_ENABLE \ + (CR_ALIRQ | CR_NAKRIRQ | CR_DRIRQ | CR_DTIRQ | CR_SCLEN | CR_I2CEN) + +/* + * status register + */ +#define SR_CLRAL 0x400 /* clear arbitration lost */ +#define SR_CLRGC 0x200 /* clear general call */ +#define SR_CLRSAM 0x100 /* clear slave address match */ +#define SR_CLRSTOP 0x80 /* clear stop */ +#define SR_CLRNAKR 0x40 /* clear NACK respond */ +#define SR_DR 0x20 /* rx ready */ +#define SR_DT 0x10 /* tx done */ +#define SR_BB 0x8 /* bus busy */ +#define SR_BUSY 0x4 /* chip busy */ +#define SR_ACK 0x2 /* ACK/NACK received */ +#define SR_RW 0x1 /* set when master-rx or slave-tx mode */ + +/* + * clock division register + */ +#define CDR_DIV(n) ((n) & 0x3ffff) + +/* + * time & glitch suppression register + */ +#define TGSR_GSR(n) (((n) & 0x7) << 10) +#define TGSR_TSR(n) ((n) & 0x3ff) + +/* + * bus monitor register + */ +#define BMR_SCL 0x2 /* SCL is pull-up */ +#define BMR_SDA 0x1 /* SDA is pull-up */ + +#endif /* __FTI2C010_H */ |
