summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/intel/ice/ice_lib.c
Commit message (Collapse)AuthorAgeFilesLines
* ice: Use Tx|Rx in commentsAnirudh Venkataramanan2018-11-201-4/+4
| | | | | | | | In code comments, use Tx|Rx instead of tx|rx Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ice: Cosmetic formatting changesAnirudh Venkataramanan2018-11-201-5/+3
| | | | | | | | | | 1. Fix several cases of double spacing 2. Fix typos 3. Capitalize abbreviations Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ice: Remove ICE_MAX_TXQ_PER_TXQG check when configuring Tx queueMd Fahad Iqbal Polash2018-11-131-4/+0
| | | | | | | | | | | This patch removes the condition checking of VSI TX queue number to ICE_MAX_TXQ_PER_TXQG. This is an unnecessary check and causes a driver load error on hosts that have more than 128 cores. Signed-off-by: Md Fahad Iqbal Polash <md.fahad.iqbal.polash@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ice: Destroy scheduler tree in reset pathHenry Tieman2018-11-131-0/+1
| | | | | | | | | | | | The scheduler tree is is always rebuilt during reset. The existing code adds new scheduler nodes for queues but may not clean up earlier nodes. This patch removed the old scheduler tree during reset before it is rebuilt. Signed-off-by: Henry Tieman <henry.w.tieman@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ice: Fix to make VLAN priority tagged traffic to appear on all TCsUsha Ketineni2018-11-131-48/+73
| | | | | | | | | | | | | | | | | This patch includes below changes to resolve the issue of ETS bandwidth shaping to work. 1. Allocation of Tx queues is accounted for based on the enabled TC's in ice_vsi_setup_q_map() and enabled the Tx queues on those TC's via ice_vsi_cfg_txqs() 2. Get the mapped netdev TC # for the user priority and set the priority to TC mapping for the VSI. Signed-off-by: Usha Ketineni <usha.k.ketineni@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ice: Increase Rx queue disable timeoutPiotr Raczynski2018-11-131-3/+3
| | | | | | | | | | | | With much traffic coming into the port, Rx queue disable procedure can take more time until all pending queue requests on PCIe finish. Reuse ICE_Q_WAIT_MAX_RETRY macro and increase the delay itself. Signed-off-by: Piotr Raczynski <piotr.raczynski@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ice: Remove node before releasing VSIAnirudh Venkataramanan2018-11-131-0/+1
| | | | | | | | | | | | | | | Before releasing the VSI, remove the VSI scheduler node. If not, the node is left in the scheduler tree and, on subsequent load, the scheduler tree contains the node so it does not set it in vsi_ctx. This, later, causes the node to not be found in ice_sched_get_free_qparent which leads to a "Failed to set LAN Tx queue context, error: -1". To remove the scheduler node, this patch introduces ice_rm_vsi_lan_cfg and related helpers. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ice: Check for q_vector when stopping ringsTony Nguyen2018-11-131-1/+2
| | | | | | | | | | | | | There is a gap in time between a VF reset, which sets the q_vector to NULL, and the VF requesting mapping of the q_vectors. If ice_vsi_stop_tx_rings() is called during this time, a NULL pointer dereference is encountered. Add a check in ice_vsi_stop_tx_rings() to ensure the q_vector is set to avoid this situation from occurring. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ice: Fix napi delete calls for removeDave Ertman2018-11-061-0/+1
| | | | | | | | | | | | | | In the remove path, the vsi->netdev is being set to NULL before the call to free vectors. This is causing the netif_napi_del call to never be made. Add a call to ice_napi_del to the same location as the calls to unregister_netdev and just prior to them. This will use the reverse flow as the register and netif_napi_add calls. Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ice: Fix typo in error messageAnirudh Venkataramanan2018-11-061-1/+1
| | | | | | | | | Print should say "Enabling" instead of "Enaabling" Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ice: Introduce ice_dev_onetime_setupAnirudh Venkataramanan2018-10-241-0/+1
| | | | | | | | | | | | | ice_dev_onetime_setup contains a couple of driver workarounds for current firmware limitations. These workarounds are expected to go away once these limitations are fixed in the firmware. On a firmware release that has these issues addressed, these workarounds (while unnecessary) will not break anything. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ice: Make ice_msix_clean_rings staticAnirudh Venkataramanan2018-10-241-1/+1
| | | | | | | | | | commit 158a08a694c4e ("ice: remove ndo_poll_controller") removed ice_netpoll and introduced a namespace warning for ice_msix_clean_rings. Fix the namespace warning by making ice_msix_clean_rings static. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ice: Add more flexibility on how we assign an ITR indexBrett Creeley2018-10-031-30/+43
| | | | | | | | | | | | | | | | | | | | | | | | | This issue came about when looking at the VF function ice_vc_cfg_irq_map_msg. Currently we are assigning the itr_setting value to the itr_idx received from the AVF driver, which is not correct and is not used for the VF flow anyway. Currently the only way we set the ITR index for both the PF and VF driver is by hard coding ICE_TX_ITR or ICE_RX_ITR for the ITR index on each q_vector. To fix this, add the member itr_idx in struct ice_ring_container. This can then be used to dynamically program the correct ITR index. This change also affected the PF driver so make the necessary changes there as well. Also, removed the itr_setting member in struct ice_ring because it is not being used meaningfully and is going to be removed in a future patch that includes dynamic ITR. On another note, this will be useful moving forward if we decide to split Rx/Tx rings on different q_vectors instead of sharing them as queue pairs. Signed-off-by: Brett Creeley <brett.creeley@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ice: Update VSI and queue management code to handle VF VSIAnirudh Venkataramanan2018-10-031-34/+176
| | | | | | | | | | Until now, all the VSI and queue management code supported only the PF VSI type (ICE_VSI_PF). Update these flows to handle the VF VSI type (ICE_VSI_VF) type as well. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ice: Add handler to configure SR-IOVAnirudh Venkataramanan2018-10-031-2/+5
| | | | | | | | | | | | | | | | | | | | | | This patch implements parts of ice_sriov_configure and VF reset flow. To create virtual functions (VFs), the user sets a value in num_vfs through sysfs. This results in the kernel calling the handler for .sriov_configure which is ice_sriov_configure. VF setup first starts with a VF reset, followed by allocation of the VF VSI using ice_vf_vsi_setup. Once the VF setup is complete a state bit ICE_VF_STATE_INIT is set in the vf->states bitmap to indicate that the VF is ready to go. Also for VF reset to go into effect, it's necessary to issue a disable queue command (ice_aqc_opc_dis_txqs). So this patch updates multiple functions in the disable queue flow to take additional parameters that distinguish if queues are being disabled due to VF reset. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ice: Add support for dynamic interrupt moderationBrett Creeley2018-10-021-3/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently there is no support for dynamic interrupt moderation. This patch adds some initial code to support this. The following changes were made: 1. Currently we are using multiple members to store the interrupt granularity (itr_gran_25/50/100/200). This is not necessary because we can query the device to determine what the interrupt granularity should be set to, done by a new function ice_get_itr_intrl_gran. 2. Added intrl to ice_q_vector structure to support interrupt rate limiting. 3. Added the function ice_intrl_usecs_to_reg for converting to a value in usecs that the device understands. 4. Added call to write to the GLINT_RATE register. Disable intrl by default for now. 5. Changed rx/tx_itr_setting to itr_setting because having both seems redundant because a ring is either Tx or Rx. 6. Initialize itr_setting for both Tx/Rx rings in ice_vsi_alloc_rings() Signed-off-by: Brett Creeley <brett.creeley@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ice: Implement ethtool hook for RSS switchMd Fahad Iqbal Polash2018-10-021-0/+32
| | | | | | | | | | | This patch implements ethtool hook for enabling/disabling RSS. While disabling RSS, the LUT should be cleared. And the LUT should be reconfigured while enabling RSS. Signed-off-by: Md Fahad Iqbal Polash <md.fahad.iqbal.polash@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ice: Split irq_tracker into sw_irq_tracker and hw_irq_trackerPreethi Banala2018-10-021-23/+52
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | For the PF driver, when mapping interrupts to queues, we need to request IRQs from the kernel and we also have to allocate interrupts from the device. Similarly, when the VF driver (iavf.ko) initializes, it requests the kernel IRQs that it needs but it can't directly allocate interrupts in the device. Instead, it sends a mailbox message to the ice driver, which then allocates interrupts in the device on the VF driver's behalf. Currently both these cases end up having to reserve entries in pf->irq_tracker but irq_tracker itself is sized based on how many vectors the PF driver needs. Under the right circumstances, the VF driver can fail to get entries in irq_tracker, which will result in the VF driver failing probe. To fix this, sw_irq_tracker and hw_irq_tracker are introduced. The sw_irq_tracker tracks only the PF's IRQ request and doesn't play any role in VF init. hw_irq_tracker represents the device's interrupt space. When interrupts have to be allocated in the device for either PF or VF, hw_irq_tracker will be looked up to see if the device has run out of interrupts. Signed-off-by: Preethi Banala <preethi.banala@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ice: Expand use of VSI handles part 2/2Anirudh Venkataramanan2018-10-021-9/+9
| | | | | | | | | This patch is a continuation of the previous patch where VSI handles are used instead of VSI numbers. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ice: Expand use of VSI handles part 1/2Anirudh Venkataramanan2018-10-021-15/+13
| | | | | | | | | | | | | | | | | A VSI handle is just a number the driver maintains to uniquely identify a VSI. A VSI handle is backed by a VSI number in the hardware. When interacting when the hardware, VSI handles are converted into VSI numbers. In commit 0f9d5027a749 ("ice: Refactor VSI allocation, deletion and rebuild flow"), VSI handles were introduced but it was used only when creating and deleting VSIs. This patch is part one of two patches that expands the use of VSI handles across the rest of the driver. Also in this patch, certain parts of the code had to be refactored to correctly use VSI handles. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ice: Change pf state behavior to protect reset pathDave Ertman2018-10-011-5/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, there is no bit, or set of bits, that protect the entirety of the reset path. If the reset is originated by the driver, then the relevant one of the following bits will be set when the reset is scheduled: __ICE_PFR_REQ __ICE_CORER_REQ __ICE_GLOBR_REQ This bit will not be cleared until after the rebuild has completed. If the reset is originated by the FW, then the first the driver knows of it will be the reception of the OICR interrupt. The __ICE_RESET_OICR_RECV bit will be set in the interrupt handler. This will also be the indicator in a SW originated reset that we have completed the pre-OICR tasks and have informed the FW that a reset was requested. To utilize these bits, change the function: ice_is_reset_recovery_pending() to be: ice_is_reset_in_progress() The new function will check all of the above bits in the pf->state and will return a true if one or more of these bits are set. Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ice: Move common functions out of ice_main.c part 7/7Anirudh Venkataramanan2018-10-011-10/+243
| | | | | | | | | | | | | | | | | | | | | | | | | This patch completes the code move out of ice_main.c The following top level functions and related dependency functions) were moved to ice_lib.c: ice_vsi_setup ice_vsi_cfg_tc The following functions were made static again: ice_vsi_setup_vector_base ice_vsi_alloc_q_vectors ice_vsi_get_qs void ice_vsi_map_rings_to_vectors ice_vsi_alloc_rings ice_vsi_set_rss_params ice_vsi_set_num_qs ice_get_free_slot ice_vsi_init ice_vsi_alloc_arrays Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ice: Move common functions out of ice_main.c part 6/7Anirudh Venkataramanan2018-10-011-2/+461
| | | | | | | | | | | | | | | | | | | | | | This patch continues the code move out of ice_main.c The following top level functions (and related dependency functions) were moved to ice_lib.c: ice_vsi_setup_vector_base ice_vsi_alloc_q_vectors ice_vsi_get_qs The following functions were made static again: ice_vsi_free_arrays ice_vsi_clear_rings Also, in this patch, the netdev and NAPI registration logic was de-coupled from the VSI creation logic (ice_vsi_setup) as for SR-IOV, while we want to create VF VSIs using ice_vsi_setup, we don't want to create netdevs. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ice: Move common functions out of ice_main.c part 5/7Anirudh Venkataramanan2018-10-011-0/+133
| | | | | | | | | | | | | | | This patch continues the code move out of ice_main.c The following top level functions (and related dependency functions) were moved to ice_lib.c: ice_vsi_clear ice_vsi_close ice_vsi_free_arrays ice_vsi_map_rings_to_vectors Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ice: Move common functions out of ice_main.c part 4/7Anirudh Venkataramanan2018-10-011-0/+414
| | | | | | | | | | | | | | | | | | This patch continues the code move out of ice_main.c The following top level functions (and related dependency functions) were moved to ice_lib.c: ice_vsi_alloc_rings ice_vsi_set_rss_params ice_vsi_set_num_qs ice_get_free_slot ice_vsi_init ice_vsi_clear_rings ice_vsi_alloc_arrays Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ice: Move common functions out of ice_main.c part 3/7Anirudh Venkataramanan2018-10-011-0/+388
| | | | | | | | | | | | | | | | | | | | | This patch continues the code move out of ice_main.c The following top level functions (and related dependency functions) were moved to ice_lib.c: ice_vsi_delete ice_free_res ice_get_res ice_is_reset_recovery_pending ice_vsi_put_qs ice_vsi_dis_irq ice_vsi_free_irq ice_vsi_free_rx_rings ice_vsi_free_tx_rings ice_msix_clean_rings Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ice: Move common functions out of ice_main.c part 2/7Anirudh Venkataramanan2018-10-011-0/+491
| | | | | | | | | | | | | | | | | This patch continues the code move out of ice_main.c The following top level functions (and related dependency functions) were moved to ice_lib.c: ice_vsi_start_rx_rings ice_vsi_stop_rx_rings ice_vsi_stop_tx_rings ice_vsi_cfg_rxqs ice_vsi_cfg_txqs ice_vsi_cfg_msix Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ice: Move common functions out of ice_main.c part 1/7Anirudh Venkataramanan2018-10-011-0/+258
The functions that are used for PF VSI/netdev setup will also be used for SR-IOV support. To allow reuse of these functions, move these functions out of ice_main.c to ice_common.c/ice_lib.c This move is done across multiple patches. Each patch moves a few functions and may have minor adjustments. For example, a function that was previously static in ice_main.c will be made non-static temporarily in its new location to allow the driver to build cleanly. These adjustments will be removed in subsequent patches where more code is moved out of ice_main.c In this particular patch, the following functions were moved out of ice_main.c: int ice_add_mac_to_list ice_free_fltr_list ice_stat_update40 ice_stat_update32 ice_update_eth_stats ice_vsi_add_vlan ice_vsi_kill_vlan ice_vsi_manage_vlan_insertion ice_vsi_manage_vlan_stripping Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
OpenPOWER on IntegriCloud