| Commit message (Collapse) | Author | Age | Files | Lines |
|---|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
On the Blackbird desk-side systems we expect users will be running
large fans very slowly. The current tachometer reading drops to
zero under those conditions, resulting in failed fan detection
systems kicking in.
Increase the tachometer read time to allow for slower fans to
return a valid speed. This does make read slower, but more
advance fan control software should be able to compensate via
e.g. PID loops.
Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
Having a tachometer read return an -ETIMEDOUT error condition
instead of 0 RPM due to a disconnected or failed fan is highly
unexpected, and depending on higher level software can cause
application failures.
Return 0 RPM if tachometer cannot be read. This should trigger
the same error paths in any sane fan control implementation without
requiring special handling for the AST2x00 devices.
Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com>
|
| |
|
|
|
|
| |
access errors and taint when built as a module
Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com>
|
| |
|
|
|
|
|
|
|
|
|
| |
Apply differences from hwmon review to bring the driver code to the same
point. There were some key differences regarding attribute placement
from the review, beyond the normal cleanup.
OpenBMC-Staging-Count: 1
Signed-off-by: Patrick Venture <venture@google.com>
[AJ: Rework subject]
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
This patch makes it possible to pass custom struct attribute_group array
via the pmbus_driver_info struct so that those can be added to the
attribute groups passed to hwmon_device_register_with_groups().
This makes it possible to register custom sysfs attributes by PMBUS
drivers similar to how you can do this with most other busses/classes.
Signed-off-by: Krzysztof Adamski <krzysztof.adamski@nokia.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The occ driver supports two formats for the temp sensor value.
The OCC firmware for P8 supports only the first format, for which
no range checking or error processing is performed in the driver.
Inspecting the OCC sources for P8 reveals that OCC may send
a special value 0xFFFF to indicate that a sensor read timeout
has occurred, see
https://github.com/open-power/occ/blob/master_p8/src/occ/cmdh/cmdh_fsp_cmds.c#L395
That situation wasn't handled in the driver. This patch adds invalid
temp value check for the sensor data format 1 and handles it the same
way as it is done for the format 2, where EREMOTEIO is reported for
this case.
Signed-off-by: Alexander Soldatov <a.soldatov@yadro.com>
Signed-off-by: Alexander Amelkin <a.amelkin@yadro.com>
Reviewed-by: Alexander Amelkin <a.amelkin@yadro.com>
Cc: Edward A. James <eajames@us.ibm.com>
Cc: Joel Stanley <joel@jms.id.au>
Reviewed-by: Eddie James <eajames@linux.ibm.com>
|
| |
|
|
|
|
|
|
|
|
|
| |
The error sysfs attribute returns the stored error state of the OCC and
doesn't depend on the OCC poll response. Therefore, split the error
attribute into it's own function to avoid failing out of the function if
the poll response fails.
OpenBMC-Staging-Count: 1
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
|
| |
|
|
|
|
|
|
|
|
|
| |
The OCC driver limits the rate of sending poll commands to the OCC. If a
user reads a hwmon entry after a poll response resulted in an error and
is rate-limited, the error is invisible to the user. Fix this by storing
the last error and returning that in the rate-limited case.
OpenBMC-Staging-Count: 1
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
|
| |
|
|
|
|
|
|
|
|
| |
The occ's extended status is checked and shown as sysfs attributes. But
the code was incorrectly checking the "status" bits.
Fix it by checking the "ext_status" bits.
Signed-off-by: Lei YU <mine260309@gmail.com>
Reviewed-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
|
| |
|
|
|
|
|
|
|
| |
Add the pmbus driver for the Infineon ir38064 voltage regulator.
OpenBMC-Staging-Count: 1
Signed-off-by: Maxim Sloyko <maxims@google.com>
Signed-off-by: Patrick Vtenture <venture@google.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
| |
|
|
|
|
|
|
|
|
| |
Adds the pmbus driver for the Intersil ISL68137 PWM Controller.
OpenBMC-Staging-Count: 1
Signed-off-by: Maxim Sloyko <maxims@google.com>
Signed-off-by: Robert Lippert <rlippert@google.com>
Signed-off-by: Patrick Venture <venture@google.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In the case of power sensor version 0xA0, the sensor indexing overlapped
with the "caps" power sensors, resulting in probe failure and kernel
warnings.
[ 81.895963] occ-hwmon occ-hwmon.1: OCC found, code level: op_occ_181108a
[ 81.903965] sysfs: cannot create duplicate filename '/devices/platform/gpio-fsi/fsi0/slave@00:00/00:00:00:06/sbefifo1-dev0/occ-hwmon.1/hwmon/hwmon4/power2_label'
Fix this by specifying the next index for each power sensor
version.
OpenBMC-Staging-Count: 1
Fixes: 54076cb ("hwmon (occ): Add sensor attributes and register ...")
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
| |
|
|
|
|
|
|
|
|
|
|
| |
This commit adds PECI dimmtemp hwmon driver.
OpenBMC-Staging-Count: 2
Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Reviewed-by: Haiyue Wang <haiyue.wang@linux.intel.com>
Reviewed-by: James Feist <james.feist@linux.intel.com>
Reviewed-by: Vernon Mauery <vernon.mauery@linux.intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
| |
|
|
|
|
|
|
|
|
|
|
| |
This commit adds PECI cputemp hwmon driver.
OpenBMC-Staging-Count: 2
Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Reviewed-by: Haiyue Wang <haiyue.wang@linux.intel.com>
Reviewed-by: James Feist <james.feist@linux.intel.com>
Reviewed-by: Vernon Mauery <vernon.mauery@linux.intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
| |
|
|
|
|
|
|
|
|
|
| |
The MAX31785(A) has shown erratic behaviour across multiple system
designs, unexpectedly clock stretching and NAKing transactions. Perform
a one-shot retry if necessary for all access attempts.
OpenBMC-Staging-Count: 6
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Tested-by: George Keishing <gkeishin@in.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
The driver may have overridden the pmbus_read_byte_data() callback, so
make sure we use that to achieve expected behaviour.
This helps in the MAX31785 case where we may need to perform a one-shot
retry of transfers in the face of a failure.
OpenBMC-Staging-Count: 6
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Eddie James <eajames@linux.vnet.ibm.com>
Tested-by: George Keishing <gkeishin@in.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Work around the shonky behaviour seen with the MAX31785 where we fail
to set the page register in some circumstances.
There's no real elegant way to do this. We can propagate the error up,
but that forces us to retry the operation way up the call tree in any
number of places. It also forces callers to split out pmbus_set_page()
from the pmbus_{read,write}_{byte,word}_data() functions in order to
differentiate between a failure to set the page and a failure to read a
register (that might not exist, in which case an error is anticiptated).
OpenBMC-Staging-Count: 6
Cc: Eddie James <eajames@linux.vnet.ibm.com>
Cc: Matt Spinler <mspinler@linux.vnet.ibm.com>
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Eddie James <eajames@linux.vnet.ibm.com>
Tested-by: George Keishing <gkeishin@in.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
| |
|
|
|
|
|
| |
OpenBMC-Staging-Count: 6
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Tested-by: George Keishing <gkeishin@in.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
| |
|
|
|
|
|
|
|
|
|
|
| |
Commit 2d99925a15b6 ("hwmon: (nct6775) Separate fan/pwm configuration
detection for NCT6793D") accidentally removed part of the code detecting
if fan6 is enabled or not. As result, fan6 is no longer detected on Asus
PRIME Z370-A. Restore the missing detection code.
Fixes: 2d99925a15b6 ("hwmon: (nct6775) Separate fan/pwm configuration detection for NCT6793D")
Reported-by: Chris Siebenmann <cks@cs.toronto.edu>
Cc: Chris Siebenmann <cks@cs.toronto.edu>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
| |
|
|
|
|
|
|
|
|
|
| |
in OF device ID table
Correct a typo in OF device ID table
The last one should be 'ti,tmp442'
Signed-off-by: Cheng-Min Ao <tony_ao@wiwynn.com>
Signed-off-by: Yu-Hsiang Chen <matt_chen@wiwynn.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Cast get_unaligned_be32(...) to u64 in order to give the compiler
complete information about the proper arithmetic to use and avoid
a potential integer overflow.
Notice that such function call is used in contexts that expect
expressions of type u64 (64 bits, unsigned); and the following
expressions are currently being evaluated using 32-bit
arithmetic:
val = get_unaligned_be32(&power->update_tag) *
occ->powr_sample_time_us;
val = get_unaligned_be32(&power->vdn.update_tag) *
occ->powr_sample_time_us;
Addresses-Coverity-ID: 1442357 ("Unintentional integer overflow")
Addresses-Coverity-ID: 1442476 ("Unintentional integer overflow")
Addresses-Coverity-ID: 1442508 ("Unintentional integer overflow")
Fixes: ff692d80b2e2 ("hwmon (occ): Add sensor types and versions")
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
| |
|
|
|
|
|
|
|
| |
Add the missing unlock before return from function set_fan_div()
in the error handling case.
Fixes: c9c63915519b ("hwmon: (lm80) fix a missing check of the status of SMBus read")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
| |
|
|
|
|
|
|
|
|
|
| |
Similar to other recent chips from Nuvoton, IO mapping may be disabled
by default. Enable it when instantiating the driver and after resume.
Fixes: 0599682b826f ("hwmon: (nct6775) Add support for NCT6798D")
Fixes: e41da286a2fd ("hwmon: (nct6775) Add support for NCT6797D")
Reported-by: Michael Cook <mcook@mackal.net>
Cc: Michael Cook <mcook@mackal.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
| |
|
|
|
|
|
|
|
| |
The chip ID is 0xd42[8-f], not 0xd45[8-f].
Fixes: 0599682b826f ("hwmon: (nct6775) Add support for NCT6798D")
Reported-by: Michael Cook <mcook@mackal.net>
Cc: Michael Cook <mcook@mackal.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
| |\
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kconfig updates from Masahiro Yamada:
- support -y option for merge_config.sh to avoid downgrading =y to =m
- remove S_OTHER symbol type, and touch include/config/*.h files correctly
- fix file name and line number in lexer warnings
- fix memory leak when EOF is encountered in quotation
- resolve all shift/reduce conflicts of the parser
- warn no new line at end of file
- make 'source' statement more strict to take only string literal
- rewrite the lexer and remove the keyword lookup table
- convert to SPDX License Identifier
- compile C files independently instead of including them from zconf.y
- fix various warnings of gconfig
- misc cleanups
* tag 'kconfig-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (39 commits)
kconfig: surround dbg_sym_flags with #ifdef DEBUG to fix gconf warning
kconfig: split images.c out of qconf.cc/gconf.c to fix gconf warnings
kconfig: add static qualifiers to fix gconf warnings
kconfig: split the lexer out of zconf.y
kconfig: split some C files out of zconf.y
kconfig: convert to SPDX License Identifier
kconfig: remove keyword lookup table entirely
kconfig: update current_pos in the second lexer
kconfig: switch to ASSIGN_VAL state in the second lexer
kconfig: stop associating kconf_id with yylval
kconfig: refactor end token rules
kconfig: stop supporting '.' and '/' in unquoted words
treewide: surround Kconfig file paths with double quotes
microblaze: surround string default in Kconfig with double quotes
kconfig: use T_WORD instead of T_VARIABLE for variables
kconfig: use specific tokens instead of T_ASSIGN for assignments
kconfig: refactor scanning and parsing "option" properties
kconfig: use distinct tokens for type and default properties
kconfig: remove redundant token defines
kconfig: rename depends_list to comment_option_list
...
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
The Kconfig lexer supports special characters such as '.' and '/' in
the parameter context. In my understanding, the reason is just to
support bare file paths in the source statement.
I do not see a good reason to complicate Kconfig for the room of
ambiguity.
The majority of code already surrounds file paths with double quotes,
and it makes sense since file paths are constant string literals.
Make it treewide consistent now.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
|
| |\ \
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"The big change in this series is for the most part automatic:
Introducing SENSOR[_DEVICE]_ATTR_{RO,RW,WO} variants and conversion of
various drivers to use it. This is similar to DEVICE_ATTR variants.
Other than that, we have
- Some conversions of S_<PERMS> with octal values, also automated
- Added support for Hygon Dhyana CPUs to k10temp driver
- Added support for STLM75 to lm75 driver
- B57891S0103 to ntc_thermistor
- Added pm-runtime support to ina3221 driver
- Support for PowerPC On-Chip Controller (OCC)
- Various minor bug fices and improvements"
* tag 'hwmon-for-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (80 commits)
hwmon: (lm80) fix a missing check of bus read in lm80 probe
hwmon: (lm80) fix a missing check of the status of SMBus read
hwmon: (asus_atk0110) Fix debugfs_simple_attr.cocci warnings
hwmon: (ftsteutates) Use permission specific SENSOR[_DEVICE]_ATTR variants
hwmon: (fschmd) Use permission specific SENSOR[_DEVICE]_ATTR variants
hwmon: (emc6w201) Use permission specific SENSOR[_DEVICE]_ATTR variants
hwmon: (emc2103) Use permission specific SENSOR[_DEVICE]_ATTR variants
hwmon: (emc1403) Use permission specific SENSOR[_DEVICE]_ATTR variants
hwmon: (ds620) Use permission specific SENSOR[_DEVICE]_ATTR variants
hwmon: (ds1621) Use permission specific SENSOR[_DEVICE]_ATTR variants
hwmon: (dell-smm-hwmon) Use permission specific SENSOR[_DEVICE]_ATTR variants
hwmon: (da9055-hwmon) Use permission specific SENSOR[_DEVICE]_ATTR variants
hwmon: (da9052-hwmon) Use permission specific SENSOR[_DEVICE]_ATTR variants
hwmon: (coretemp) Replace S_<PERMS> with octal values
hwmon: (asus_atk0110) Replace S_<PERMS> with octal values
hwmon: (aspeed-pwm-tacho) Use permission specific SENSOR[_DEVICE]_ATTR variants
hwmon: (applesmc) Replace S_<PERMS> with octal values
hwmon: (amc6821) Use permission specific SENSOR[_DEVICE]_ATTR variants
hwmon: (adt7x10) Use permission specific SENSOR[_DEVICE]_ATTR variants
hwmon: (adt7475) Use permission specific SENSOR[_DEVICE]_ATTR variants
...
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
In lm80_probe(), if lm80_read_value() fails, it returns a negative
error number which is stored to data->fan[f_min] and will be further
used. We should avoid using the data if the read fails.
The fix checks if lm80_read_value() fails, and if so, returns with the
error number.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
If lm80_read_value() fails, it returns a negative number instead of the
correct read data. Therefore, we should avoid using the data if it
fails.
The fix checks if lm80_read_value() fails, and if so, returns with the
error number.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
[groeck: One variable for return values is enough]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Use DEFINE_DEBUGFS_ATTRIBUTE rather than DEFINE_SIMPLE_ATTRIBUTE
for debugfs files.
Semantic patch information:
Rationale: DEFINE_SIMPLE_ATTRIBUTE + debugfs_create_file()
imposes some significant overhead as compared to
DEFINE_DEBUGFS_ATTRIBUTE + debugfs_create_file_unsafe().
Generated by: scripts/coccinelle/api/debugfs/debugfs_simple_attr.cocci
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Use SENSOR[_DEVICE]_ATTR[_2]_{RO,RW,WO} to simplify the source code,
to improve readbility, and to reduce the chance of inconsistencies.
Also replace any remaining S_<PERMS> in the driver with octal values.
The conversion was done automatically with coccinelle. The semantic patches
and the scripts used to generate this commit log are available at
https://github.com/groeck/coccinelle-patches/hwmon/.
This patch does not introduce functional changes. It was verified by
compiling the old and new files and comparing text and data sizes.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Use SENSOR[_DEVICE]_ATTR[_2]_{RO,RW,WO} to simplify the source code,
to improve readbility, and to reduce the chance of inconsistencies.
Also replace any remaining S_<PERMS> in the driver with octal values.
The conversion was done automatically with coccinelle. The semantic patches
and the scripts used to generate this commit log are available at
https://github.com/groeck/coccinelle-patches/hwmon/.
This patch does not introduce functional changes. It was verified by
compiling the old and new files and comparing text and data sizes.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Use SENSOR[_DEVICE]_ATTR[_2]_{RO,RW,WO} to simplify the source code,
to improve readbility, and to reduce the chance of inconsistencies.
Also replace any remaining S_<PERMS> in the driver with octal values.
The conversion was done automatically with coccinelle. The semantic patches
and the scripts used to generate this commit log are available at
https://github.com/groeck/coccinelle-patches/hwmon/.
This patch does not introduce functional changes. It was verified by
compiling the old and new files and comparing text and data sizes.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Use SENSOR[_DEVICE]_ATTR[_2]_{RO,RW,WO} to simplify the source code,
to improve readbility, and to reduce the chance of inconsistencies.
Also replace any remaining S_<PERMS> in the driver with octal values.
The conversion was done automatically with coccinelle. The semantic patches
and the scripts used to generate this commit log are available at
https://github.com/groeck/coccinelle-patches/hwmon/.
This patch does not introduce functional changes. It was verified by
compiling the old and new files and comparing text and data sizes.
Cc: Steve Glendinning <steve.glendinning@shawell.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Use SENSOR[_DEVICE]_ATTR[_2]_{RO,RW,WO} to simplify the source code,
to improve readbility, and to reduce the chance of inconsistencies.
Also replace any remaining S_<PERMS> in the driver with octal values.
The conversion was done automatically with coccinelle. The semantic patches
and the scripts used to generate this commit log are available at
https://github.com/groeck/coccinelle-patches/hwmon/.
This patch does not introduce functional changes. It was verified by
compiling the old and new files and comparing text and data sizes.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Use SENSOR[_DEVICE]_ATTR[_2]_{RO,RW,WO} to simplify the source code,
to improve readbility, and to reduce the chance of inconsistencies.
Also replace any remaining S_<PERMS> in the driver with octal values.
The conversion was done automatically with coccinelle. The semantic patches
and the scripts used to generate this commit log are available at
https://github.com/groeck/coccinelle-patches/hwmon/.
This patch does not introduce functional changes. It was verified by
compiling the old and new files and comparing text and data sizes.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Use SENSOR[_DEVICE]_ATTR[_2]_{RO,RW,WO} to simplify the source code,
to improve readbility, and to reduce the chance of inconsistencies.
Also replace any remaining S_<PERMS> in the driver with octal values.
The conversion was done automatically with coccinelle. The semantic patches
and the scripts used to generate this commit log are available at
https://github.com/groeck/coccinelle-patches/hwmon/.
This patch does not introduce functional changes. It was verified by
compiling the old and new files and comparing text and data sizes.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Use SENSOR[_DEVICE]_ATTR[_2]_{RO,RW,WO} to simplify the source code,
to improve readbility, and to reduce the chance of inconsistencies.
Also replace any remaining S_<PERMS> in the driver with octal values.
The conversion was done automatically with coccinelle. The semantic patches
and the scripts used to generate this commit log are available at
https://github.com/groeck/coccinelle-patches/hwmon/.
This patch does not introduce functional changes. It was verified by
compiling the old and new files and comparing text and data sizes.
Cc: "Pali Rohár" <pali.rohar@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Use SENSOR[_DEVICE]_ATTR[_2]_{RO,RW,WO} to simplify the source code,
to improve readbility, and to reduce the chance of inconsistencies.
Also replace any remaining S_<PERMS> in the driver with octal values.
The conversion was done automatically with coccinelle. The semantic patches
and the scripts used to generate this commit log are available at
https://github.com/groeck/coccinelle-patches/hwmon/.
This patch does not introduce functional changes. It was verified by
compiling the old and new files and comparing text and data sizes.
Cc: Support Opensource <support.opensource@diasemi.com>
Acked-by: Steve Twiss <stwiss.opensource@diasemi.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Use SENSOR[_DEVICE]_ATTR[_2]_{RO,RW,WO} to simplify the source code,
to improve readbility, and to reduce the chance of inconsistencies.
Also replace any remaining S_<PERMS> in the driver with octal values.
The conversion was done automatically with coccinelle. The semantic patches
and the scripts used to generate this commit log are available at
https://github.com/groeck/coccinelle-patches/hwmon/.
This patch does not introduce functional changes. It was verified by
compiling the old and new files and comparing text and data sizes.
Cc: Support Opensource <support.opensource@diasemi.com>
Acked-by: Steve Twiss <stwiss.opensource@diasemi.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Replace S_<PERMS> with octal values.
The conversion was done automatically with coccinelle. The semantic patches
and the scripts used to generate this commit log are available at
https://github.com/groeck/coccinelle-patches/hwmon/.
This patch does not introduce functional changes. It was verified by
compiling the old and new files and comparing text and data sizes.
Cc: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Replace S_<PERMS> with octal values.
The conversion was done automatically with coccinelle. The semantic patches
and the scripts used to generate this commit log are available at
https://github.com/groeck/coccinelle-patches/hwmon/.
This patch does not introduce functional changes. It was verified by
compiling the old and new files and comparing text and data sizes.
Cc: Luca Tettamanti <kronos.it@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Use SENSOR[_DEVICE]_ATTR[_2]_{RO,RW,WO} to simplify the source code,
to improve readbility, and to reduce the chance of inconsistencies.
Also replace any remaining S_<PERMS> in the driver with octal values.
The conversion was done automatically with coccinelle. The semantic patches
and the scripts used to generate this commit log are available at
https://github.com/groeck/coccinelle-patches/hwmon/.
This patch does not introduce functional changes. It was verified by
compiling the old and new files and comparing text and data sizes.
Cc: Joel Stanley <joel@jms.id.au>
Cc: Andrew Jeffery <andrew@aj.id.au>
Tested-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Replace S_<PERMS> with octal values.
The conversion was done automatically with coccinelle. The semantic patches
and the scripts used to generate this commit log are available at
https://github.com/groeck/coccinelle-patches/hwmon/.
This patch does not introduce functional changes. It was verified by
compiling the old and new files and comparing text and data sizes.
Cc: Henrik Rydberg <rydberg@bitmath.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Use SENSOR[_DEVICE]_ATTR[_2]_{RO,RW,WO} to simplify the source code,
to improve readbility, and to reduce the chance of inconsistencies.
Also replace any remaining S_<PERMS> in the driver with octal values.
The conversion was done automatically with coccinelle. The semantic patches
and the scripts used to generate this commit log are available at
https://github.com/groeck/coccinelle-patches/hwmon/.
This patch does not introduce functional changes. It was verified by
compiling the old and new files and comparing text and data sizes.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Use SENSOR[_DEVICE]_ATTR[_2]_{RO,RW,WO} to simplify the source code,
to improve readbility, and to reduce the chance of inconsistencies.
Also replace any remaining S_<PERMS> in the driver with octal values.
The conversion was done automatically with coccinelle. The semantic patches
and the scripts used to generate this commit log are available at
https://github.com/groeck/coccinelle-patches/hwmon/.
This patch does not introduce functional changes. It was verified by
compiling the old and new files and comparing text and data sizes.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Use SENSOR[_DEVICE]_ATTR[_2]_{RO,RW,WO} to simplify the source code,
to improve readbility, and to reduce the chance of inconsistencies.
Also replace any remaining S_<PERMS> in the driver with octal values.
The conversion was done automatically with coccinelle. The semantic patches
and the scripts used to generate this commit log are available at
https://github.com/groeck/coccinelle-patches/hwmon/.
This patch does not introduce functional changes. It was verified by
compiling the old and new files and comparing text and data sizes.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Use SENSOR[_DEVICE]_ATTR[_2]_{RO,RW,WO} to simplify the source code,
to improve readbility, and to reduce the chance of inconsistencies.
Also replace any remaining S_<PERMS> in the driver with octal values.
The conversion was done automatically with coccinelle. The semantic patches
and the scripts used to generate this commit log are available at
https://github.com/groeck/coccinelle-patches/hwmon/.
This patch does not introduce functional changes. It was verified by
compiling the old and new files and comparing text and data sizes.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Use SENSOR[_DEVICE]_ATTR[_2]_{RO,RW,WO} to simplify the source code,
to improve readbility, and to reduce the chance of inconsistencies.
Also replace any remaining S_<PERMS> in the driver with octal values.
The conversion was done automatically with coccinelle. The semantic patches
and the scripts used to generate this commit log are available at
https://github.com/groeck/coccinelle-patches/hwmon/.
This patch does not introduce functional changes. It was verified by
compiling the old and new files and comparing text and data sizes.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Use SENSOR[_DEVICE]_ATTR[_2]_{RO,RW,WO} to simplify the source code,
to improve readbility, and to reduce the chance of inconsistencies.
Also replace any remaining S_<PERMS> in the driver with octal values.
The conversion was done automatically with coccinelle. The semantic patches
and the scripts used to generate this commit log are available at
https://github.com/groeck/coccinelle-patches/hwmon/.
This patch does not introduce functional changes. It was verified by
compiling the old and new files and comparing text and data sizes.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
