diff options
Diffstat (limited to 'arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts')
| -rw-r--r-- | arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts | 116 |
1 files changed, 111 insertions, 5 deletions
diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts index df3b2e731835..fe02bc7a24fd 100644 --- a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts +++ b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts @@ -12,14 +12,79 @@ / { model = "Phytec pcm970"; compatible = "phytec,imx27-pcm970", "phytec,imx27-pcm038", "fsl,imx27"; + + chosen { + stdout-path = &uart1; + }; + + display0: LQ035Q7 { + model = "Sharp-LQ035Q7"; + native-mode = <&timing0>; + bits-per-pixel = <16>; + fsl,pcr = <0xf00080c0>; + + display-timings { + timing0: 240x320 { + clock-frequency = <5500000>; + hactive = <240>; + vactive = <320>; + hback-porch = <5>; + hsync-len = <7>; + hfront-porch = <16>; + vback-porch = <7>; + vsync-len = <1>; + vfront-porch = <9>; + pixelclk-active = <1>; + hsync-active = <1>; + vsync-active = <1>; + de-active = <0>; + }; + }; + }; + + regulators { + regulator@2 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_csien>; + reg = <2>; + regulator-name = "CSI_EN"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 24 GPIO_ACTIVE_LOW>; + regulator-always-on; + }; + }; + + usbphy { + usbphy2: usbphy@2 { + compatible = "usb-nop-xceiv"; + reg = <2>; + vcc-supply = <®_5v0>; + clocks = <&clks 0>; + clock-names = "main_clk"; + }; + }; }; &cspi1 { + pinctrl-0 = <&pinctrl_cspi1>, <&pinctrl_cspi1cs1>; fsl,spi-num-chipselects = <2>; cs-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>, <&gpio4 27 GPIO_ACTIVE_LOW>; }; +&fb { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_imxfb1>; + display = <&display0>; + lcd-supply = <®_5v0>; + fsl,dmacr = <0x00020010>; + fsl,lscr1 = <0x00120300>; + fsl,lpccr = <0x00a903ff>; + status = "okay"; +}; + &i2c1 { clock-frequency = <400000>; pinctrl-names = "default"; @@ -36,6 +101,50 @@ &iomuxc { imx27_phycore_rdk { + pinctrl_csien: csiengrp { + fsl,pins = < + MX27_PAD_USB_OC_B__GPIO2_24 0x0 + >; + }; + + pinctrl_cspi1cs1: cspi1cs1grp { + fsl,pins = < + MX27_PAD_CSPI1_SS1__GPIO4_27 0x0 + >; + }; + + pinctrl_imxfb1: imxfbgrp { + fsl,pins = < + MX27_PAD_LD0__LD0 0x0 + MX27_PAD_LD1__LD1 0x0 + MX27_PAD_LD2__LD2 0x0 + MX27_PAD_LD3__LD3 0x0 + MX27_PAD_LD4__LD4 0x0 + MX27_PAD_LD5__LD5 0x0 + MX27_PAD_LD6__LD6 0x0 + MX27_PAD_LD7__LD7 0x0 + MX27_PAD_LD8__LD8 0x0 + MX27_PAD_LD9__LD9 0x0 + MX27_PAD_LD10__LD10 0x0 + MX27_PAD_LD11__LD11 0x0 + MX27_PAD_LD12__LD12 0x0 + MX27_PAD_LD13__LD13 0x0 + MX27_PAD_LD14__LD14 0x0 + MX27_PAD_LD15__LD15 0x0 + MX27_PAD_LD16__LD16 0x0 + MX27_PAD_LD17__LD17 0x0 + MX27_PAD_CLS__CLS 0x0 + MX27_PAD_CONTRAST__CONTRAST 0x0 + MX27_PAD_LSCLK__LSCLK 0x0 + MX27_PAD_OE_ACD__OE_ACD 0x0 + MX27_PAD_PS__PS 0x0 + MX27_PAD_REV__REV 0x0 + MX27_PAD_SPL_SPR__SPL_SPR 0x0 + MX27_PAD_HSYNC__HSYNC 0x0 + MX27_PAD_VSYNC__VSYNC 0x0 + >; + }; + pinctrl_i2c1: i2c1grp { /* Add pullup to DATA line */ fsl,pins = < @@ -193,19 +302,16 @@ dr_mode = "host"; phy_type = "ulpi"; vbus-supply = <®_5v0>; + fsl,usbphy = <&usbphy2>; disable-over-current; status = "okay"; }; -&usbphy2 { - vcc-supply = <®_5v0>; -}; - &weim { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_weim>; - can@d4000000 { + can@4,0 { compatible = "nxp,sja1000"; reg = <4 0x00000000 0x00000100>; interrupt-parent = <&gpio5>; |
