diff options
368 files changed, 24586 insertions, 2088 deletions
diff --git a/Documentation/devicetree/bindings/arm/marvell,berlin.txt b/Documentation/devicetree/bindings/arm/marvell,berlin.txt index 737afa5f8148..94013a9a8769 100644 --- a/Documentation/devicetree/bindings/arm/marvell,berlin.txt +++ b/Documentation/devicetree/bindings/arm/marvell,berlin.txt @@ -12,6 +12,7 @@ SoC and board used. Currently known SoC compatibles are: "marvell,berlin2" for Marvell Armada 1500 (BG2, 88DE3100), "marvell,berlin2cd" for Marvell Armada 1500-mini (BG2CD, 88DE3005) "marvell,berlin2ct" for Marvell Armada ? (BG2CT, 88DE????) + "marvell,berlin2q" for Marvell Armada 1500-pro (BG2Q, 88DE3114) "marvell,berlin3" for Marvell Armada ? (BG3, 88DE????) * Example: @@ -22,3 +23,104 @@ SoC and board used. Currently known SoC compatibles are: ... } + +* Marvell Berlin2 chip control binding + +Marvell Berlin SoCs have a chip control register set providing several +individual registers dealing with pinmux, padmux, clock, reset, and secondary +CPU boot address. Unfortunately, the individual registers are spread among the +chip control registers, so there should be a single DT node only providing the +different functions which are described below. + +Required properties: +- compatible: shall be one of + "marvell,berlin2-chip-ctrl" for BG2 + "marvell,berlin2cd-chip-ctrl" for BG2CD + "marvell,berlin2q-chip-ctrl" for BG2Q +- reg: address and length of following register sets for + BG2/BG2CD: chip control register set + BG2Q: chip control register set and cpu pll registers + +* Marvell Berlin2 system control binding + +Marvell Berlin SoCs have a system control register set providing several +individual registers dealing with pinmux, padmux, and reset. + +Required properties: +- compatible: should be one of + "marvell,berlin2-system-ctrl" for BG2 + "marvell,berlin2cd-system-ctrl" for BG2CD + "marvell,berlin2q-system-ctrl" for BG2Q +- reg: address and length of the system control register set + +* Clock provider binding + +As clock related registers are spread among the chip control registers, the +chip control node also provides the clocks. Marvell Berlin2 (BG2, BG2CD, BG2Q) +SoCs share the same IP for PLLs and clocks, with some minor differences in +features and register layout. + +Required properties: +- #clock-cells: shall be set to 1 +- clocks: clock specifiers referencing the core clock input clocks +- clock-names: array of strings describing the input clock specifiers above. + Allowed clock-names for the reference clocks are + "refclk" for the SoCs osciallator input on all SoCs, + and SoC-specific input clocks for + BG2/BG2CD: "video_ext0" for the external video clock input + +Clocks provided by core clocks shall be referenced by a clock specifier +indexing one of the provided clocks. Refer to dt-bindings/clock/berlin<soc>.h +for the corresponding index mapping. + +* Pin controller binding + +Pin control registers are part of both register sets, chip control and system +control. The pins controlled are organized in groups, so no actual pin +information is needed. + +A pin-controller node should contain subnodes representing the pin group +configurations, one per function. Each subnode has the group name and the muxing +function used. + +Be aware the Marvell Berlin datasheets use the keyword 'mode' for what is called +a 'function' in the pin-controller subsystem. + +Required subnode-properties: +- groups: a list of strings describing the group names. +- function: a string describing the function used to mux the groups. + +Example: + +chip: chip-control@ea0000 { + compatible = "marvell,berlin2-chip-ctrl"; + #clock-cells = <1>; + reg = <0xea0000 0x400>; + clocks = <&refclk>, <&externaldev 0>; + clock-names = "refclk", "video_ext0"; + + spi1_pmux: spi1-pmux { + groups = "G0"; + function = "spi1"; + }; +}; + +sysctrl: system-controller@d000 { + compatible = "marvell,berlin2-system-ctrl"; + reg = <0xd000 0x100>; + + uart0_pmux: uart0-pmux { + groups = "GSM4"; + function = "uart0"; + }; + + uart1_pmux: uart1-pmux { + groups = "GSM5"; + function = "uart1"; + }; + + uart2_pmux: uart2-pmux { + groups = "GSM3"; + function = "uart2"; + }; +}; diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt index 36ede19a1630..189baba40cd6 100644 --- a/Documentation/devicetree/bindings/arm/omap/omap.txt +++ b/Documentation/devicetree/bindings/arm/omap/omap.txt @@ -80,7 +80,10 @@ SoCs: compatible = "ti,omap5432", "ti,omap5" - DRA742 - compatible = "ti,dra7xx", "ti,dra7" + compatible = "ti,dra742", "ti,dra74", "ti,dra7" + +- DRA722 + compatible = "ti,dra722", "ti,dra72", "ti,dra7" - AM4372 compatible = "ti,am4372", "ti,am43" @@ -102,6 +105,12 @@ Boards: - OMAP4 DuoVero with Parlor : Commercial expansion board with daughter board compatible = "gumstix,omap4-duovero-parlor", "gumstix,omap4-duovero", "ti,omap4430", "ti,omap4"; +- OMAP4 VAR-STK-OM44 : Commercial dev kit with VAR-OM44CustomBoard and VAR-SOM-OM44 w/WLAN + compatible = "variscite,var-stk-om44", "variscite,var-som-om44", "ti,omap4460", "ti,omap4"; + +- OMAP4 VAR-DVK-OM44 : Commercial dev kit with VAR-OM44CustomBoard, VAR-SOM-OM44 w/WLAN and LCD touchscreen + compatible = "variscite,var-dvk-om44", "variscite,var-som-om44", "ti,omap4460", "ti,omap4"; + - OMAP3 EVM : Software Development Board for OMAP35x, AM/DM37x compatible = "ti,omap3-evm", "ti,omap3" @@ -120,5 +129,8 @@ Boards: - AM437x GP EVM compatible = "ti,am437x-gp-evm", "ti,am4372", "ti,am43" -- DRA7 EVM: Software Developement Board for DRA7XX - compatible = "ti,dra7-evm", "ti,dra7" +- DRA742 EVM: Software Developement Board for DRA742 + compatible = "ti,dra7-evm", "ti,dra742", "ti,dra74", "ti,dra7" + +- DRA722 EVM: Software Development Board for DRA722 + compatible = "ti,dra72-evm", "ti,dra722", "ti,dra72", "ti,dra7" diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt b/Documentation/devicetree/bindings/arm/rockchip.txt new file mode 100644 index 000000000000..857f12636eb2 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/rockchip.txt @@ -0,0 +1,10 @@ +Rockchip platforms device tree bindings +--------------------------------------- + +- bq Curie 2 tablet: + Required root node properties: + - compatible = "mundoreader,bq-curie2", "rockchip,rk3066a"; + +- Radxa Rock board: + Required root node properties: + - compatible = "radxa,rock", "rockchip,rk3188"; diff --git a/Documentation/devicetree/bindings/arm/samsung/pmu.txt b/Documentation/devicetree/bindings/arm/samsung/pmu.txt index f1f155255f28..2a4ab046a8a1 100644 --- a/Documentation/devicetree/bindings/arm/samsung/pmu.txt +++ b/Documentation/devicetree/bindings/arm/samsung/pmu.txt @@ -2,6 +2,10 @@ SAMSUNG Exynos SoC series PMU Registers Properties: - compatible : should contain two values. First value must be one from following list: + - "samsung,exynos3250-pmu" - for Exynos3250 SoC, + - "samsung,exynos4210-pmu" - for Exynos4210 SoC, + - "samsung,exynos4212-pmu" - for Exynos4212 SoC, + - "samsung,exynos4412-pmu" - for Exynos4412 SoC, - "samsung,exynos5250-pmu" - for Exynos5250 SoC, - "samsung,exynos5420-pmu" - for Exynos5420 SoC. second value must be always "syscon". diff --git a/Documentation/devicetree/bindings/arm/samsung/sysreg.txt b/Documentation/devicetree/bindings/arm/samsung/sysreg.txt index 0ab3251a6ec2..4fced6e9d5e4 100644 --- a/Documentation/devicetree/bindings/arm/samsung/sysreg.txt +++ b/Documentation/devicetree/bindings/arm/samsung/sysreg.txt @@ -1,8 +1,10 @@ SAMSUNG S5P/Exynos SoC series System Registers (SYSREG) Properties: - - compatible : should contain "samsung,<chip name>-sysreg", "syscon"; - For Exynos4 SoC series it should be "samsung,exynos4-sysreg", "syscon"; + - compatible : should contain two values. First value must be one from following list: + - "samsung,exynos4-sysreg" - for Exynos4 based SoCs, + - "samsung,exynos5-sysreg" - for Exynos5 based SoCs. + second value must be always "syscon". - reg : offset and length of the register set. Example: @@ -10,3 +12,8 @@ Example: compatible = "samsung,exynos4-sysreg", "syscon"; reg = <0x10010000 0x400>; }; + + syscon@10050000 { + compatible = "samsung,exynos5-sysreg", "syscon"; + reg = <0x10050000 0x5000>; + }; diff --git a/Documentation/devicetree/bindings/clock/altr_socfpga.txt b/Documentation/devicetree/bindings/clock/altr_socfpga.txt index 5dfd145d3ccf..f72e80e0dade 100644 --- a/Documentation/devicetree/bindings/clock/altr_socfpga.txt +++ b/Documentation/devicetree/bindings/clock/altr_socfpga.txt @@ -21,8 +21,8 @@ Optional properties: - fixed-divider : If clocks have a fixed divider value, use this property. - clk-gate : For "socfpga-gate-clk", clk-gate contains the gating register and the bit index. -- div-reg : For "socfpga-gate-clk", div-reg contains the divider register, bit shift, - and width. +- div-reg : For "socfpga-gate-clk" and "socfpga-periph-clock", div-reg contains + the divider register, bit shift, and width. - clk-phase : For the sdmmc_clk, contains the value of the clock phase that controls the SDMMC CIU clock. The first value is the clk_sample(smpsel), and the second value is the cclk_in_drv(drvsel). The clk-phase is used to enable the correct diff --git a/Documentation/devicetree/bindings/arm/altera/socfpga-reset.txt b/Documentation/devicetree/bindings/reset/socfpga-reset.txt index ecdb57d69dbf..32c1c8bfd5dc 100644 --- a/Documentation/devicetree/bindings/arm/altera/socfpga-reset.txt +++ b/Documentation/devicetree/bindings/reset/socfpga-reset.txt @@ -3,9 +3,11 @@ Altera SOCFPGA Reset Manager Required properties: - compatible : "altr,rst-mgr" - reg : Should contain 1 register ranges(address and length) +- #reset-cells: 1 Example: rstmgr@ffd05000 { + #reset-cells = <1>; compatible = "altr,rst-mgr"; reg = <0xffd05000 0x1000>; }; diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt new file mode 100644 index 000000000000..4ce24d425bf1 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt @@ -0,0 +1,78 @@ +QCOM GSBI (General Serial Bus Interface) Driver + +The GSBI controller is modeled as a node with zero or more child nodes, each +representing a serial sub-node device that is mux'd as part of the GSBI +configuration settings. The mode setting will govern the input/output mode of +the 4 GSBI IOs. + +Required properties: +- compatible: must contain "qcom,gsbi-v1.0.0" for APQ8064/IPQ8064 +- reg: Address range for GSBI registers +- clocks: required clock +- clock-names: must contain "iface" entry +- qcom,mode : indicates MUX value for configuration of the serial interface. + Please reference dt-bindings/soc/qcom,gsbi.h for valid mux values. + +Optional properties: +- qcom,crci : indicates CRCI MUX value for QUP CRCI ports. Please reference + dt-bindings/soc/qcom,gsbi.h for valid CRCI mux values. + +Required properties if child node exists: +- #address-cells: Must be 1 +- #size-cells: Must be 1 +- ranges: Must be present + +Properties for children: + +A GSBI controller node can contain 0 or more child nodes representing serial +devices. These serial devices can be a QCOM UART, I2C controller, spi +controller, or some combination of aforementioned devices. + +See the following for child node definitions: +Documentation/devicetree/bindings/i2c/qcom,i2c-qup.txt +Documentation/devicetree/bindings/spi/qcom,spi-qup.txt +Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt + +Example for APQ8064: + +#include <dt-bindings/soc/qcom,gsbi.h> + + gsbi4@16300000 { + compatible = "qcom,gsbi-v1.0.0"; + reg = <0x16300000 0x100>; + clocks = <&gcc GSBI4_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + qcom,mode = <GSBI_PROT_I2C_UART>; + qcom,crci = <GSBI_CRCI_QUP>; + + /* child nodes go under here */ + + i2c_qup4: i2c@16380000 { + compatible = "qcom,i2c-qup-v1.1.1"; + reg = <0x16380000 0x1000>; + interrupts = <0 153 0>; + + clocks = <&gcc GSBI4_QUP_CLK>, <&gcc GSBI4_H_CLK>; + clock-names = "core", "iface"; + + clock-frequency = <200000>; + + #address-cells = <1>; + #size-cells = <0>; + + }; + + uart4: serial@16340000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x16340000 0x1000>, + <0x16300000 0x1000>; + interrupts = <0 152 0x0>; + clocks = <&gcc GSBI4_UART_CLK>, <&gcc GSBI4_H_CLK>; + clock-names = "core", "iface"; + status = "ok"; + }; + }; + diff --git a/Documentation/devicetree/bindings/usb/omap-usb.txt b/Documentation/devicetree/bindings/usb/omap-usb.txt index 38b2faec4199..38d9bb8507cf 100644 --- a/Documentation/devicetree/bindings/usb/omap-usb.txt +++ b/Documentation/devicetree/bindings/usb/omap-usb.txt @@ -44,7 +44,9 @@ Board specific device node entry }; OMAP DWC3 GLUE - - compatible : Should be "ti,dwc3" + - compatible : Should be + * "ti,dwc3" for OMAP5 and DRA7 + * "ti,am437x-dwc3" for AM437x - ti,hwmods : Should be "usb_otg_ss" - reg : Address and length of the register set for the device. - interrupts : The irq number of this device that is used to interrupt the diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index abc308083acb..1b820caf824c 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -79,6 +79,7 @@ microchip Microchip Technology Inc. mosaixtech Mosaix Technologies, Inc. moxa Moxa mpl MPL AG +mundoreader Mundo Reader S.L. mxicy Macronix International Co., Ltd. national National Semiconductor neonode Neonode Inc. @@ -98,6 +99,7 @@ powervr PowerVR (deprecated, use img) qca Qualcomm Atheros, Inc. qcom Qualcomm Technologies, Inc qnap QNAP Systems, Inc. +radxa Radxa raidsonic RaidSonic Technology GmbH ralink Mediatek/Ralink Technology Corp. ramtron Ramtron International @@ -123,10 +125,12 @@ stericsson ST-Ericsson synology Synology, Inc. ti Texas Instruments tlm Trusted Logic Mobility +toradex Toradex AG toshiba Toshiba Corporation toumaz Toumaz usi Universal Scientifc Industrial Co., Ltd. v3 V3 Semiconductor +variscite Variscite Ltd. via VIA Technologies, Inc. voipac Voipac Technologies s.r.o. winbond Winbond Electronics corp. diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 1ae42ed4b919..5986ff63b901 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -57,7 +57,8 @@ dtb-$(CONFIG_ARCH_BCM_MOBILE) += bcm28155-ap.dtb \ bcm21664-garnet.dtb dtb-$(CONFIG_ARCH_BERLIN) += \ berlin2-sony-nsz-gs7.dtb \ - berlin2cd-google-chromecast.dtb + berlin2cd-google-chromecast.dtb \ + berlin2q-marvell-dmp.dtb dtb-$(CONFIG_ARCH_DAVINCI) += da850-enbw-cmc.dtb \ da850-evm.dtb dtb-$(CONFIG_ARCH_EFM32) += efm32gg-dk3750.dtb @@ -73,11 +74,14 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \ exynos5250-arndale.dtb \ exynos5250-smdk5250.dtb \ exynos5250-snow.dtb \ + exynos5260-xyref5260.dtb \ + exynos5410-smdk5410.dtb \ exynos5420-arndale-octa.dtb \ exynos5420-peach-pit.dtb \ exynos5420-smdk5420.dtb \ exynos5440-sd5v1.dtb \ - exynos5440-ssdk5440.dtb + exynos5440-ssdk5440.dtb \ + exynos5800-peach-pi.dtb dtb-$(CONFIG_ARCH_HI3xxx) += hi3620-hi4511.dtb dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb \ ecx-2000.dtb @@ -129,6 +133,9 @@ kirkwood := \ kirkwood-nsa310a.dtb \ kirkwood-openblocks_a6.dtb \ kirkwood-openblocks_a7.dtb \ + kirkwood-openrd-base.dtb \ + kirkwood-openrd-client.dtb \ + kirkwood-openrd-ultimate.dtb \ kirkwood-rd88f6192.dtb \ kirkwood-rd88f6281-a0.dtb \ kirkwood-rd88f6281-a1.dtb \ @@ -159,10 +166,12 @@ dtb-$(CONFIG_ARCH_MXC) += \ imx27-phytec-phycard-s-rdk.dtb \ imx31-bug.dtb \ imx35-eukrea-mbimxsd35-baseboard.dtb \ + imx35-pdk.dtb \ imx50-evk.dtb \ imx51-apf51.dtb \ imx51-apf51dev.dtb \ imx51-babbage.dtb \ + imx51-digi-connectcore-jsk.dtb \ imx51-eukrea-mbimxsd51-baseboard.dtb \ imx53-ard.dtb \ imx53-m53evk.dtb \ @@ -181,6 +190,8 @@ dtb-$(CONFIG_ARCH_MXC) += \ imx6dl-gw54xx.dtb \ imx6dl-hummingboard.dtb \ imx6dl-nitrogen6x.dtb \ + imx6dl-phytec-pbab01.dtb \ + imx6dl-riotboard.dtb \ imx6dl-sabreauto.dtb \ imx6dl-sabrelite.dtb \ imx6dl-sabresd.dtb \ @@ -205,6 +216,7 @@ dtb-$(CONFIG_ARCH_MXC) += \ imx6q-udoo.dtb \ imx6q-wandboard.dtb \ imx6sl-evk.dtb \ + vf610-colibri.dtb \ vf610-cosmic.dtb \ vf610-twr.dtb dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \ @@ -232,73 +244,80 @@ dtb-$(CONFIG_ARCH_NOMADIK) += ste-nomadik-s8815.dtb dtb-$(CONFIG_ARCH_NSPIRE) += nspire-cx.dtb \ nspire-tp.dtb \ nspire-clp.dtb -dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \ - omap2430-sdp.dtb \ +dtb-$(CONFIG_ARCH_OMAP2) += omap2420-h4.dtb \ omap2420-n800.dtb \ omap2420-n810.dtb \ omap2420-n810-wimax.dtb \ + omap2430-sdp.dtb +dtb-$(CONFIG_ARCH_OMAP3) += am3517-craneboard.dtb \ + am3517-evm.dtb \ + am3517_mt_ventoux.dtb \ omap3430-sdp.dtb \ omap3-beagle.dtb \ + omap3-beagle-xm.dtb \ + omap3-beagle-xm-ab.dtb \ omap3-cm-t3517.dtb \ - omap3-sbc-t3517.dtb \ omap3-cm-t3530.dtb \ - omap3-sbc-t3530.dtb \ omap3-cm-t3730.dtb \ - omap3-sbc-t3730.dtb \ omap3-devkit8000.dtb \ - omap3-beagle-xm.dtb \ - omap3-beagle-xm-ab.dtb \ omap3-evm.dtb \ omap3-evm-37xx.dtb \ + omap3-gta04.dtb \ + omap3-igep0020.dtb \ + omap3-igep0030.dtb \ omap3-ldp.dtb \ + omap3-lilly-dbb056.dtb \ omap3-n900.dtb \ omap3-n9.dtb \ omap3-n950.dtb \ omap3-overo-alto35.dtb \ - omap3-overo-storm-alto35.dtb \ omap3-overo-chestnut43.dtb \ - omap3-overo-storm-chestnut43.dtb \ omap3-overo-gallop43.dtb \ - omap3-overo-storm-gallop43.dtb \ omap3-overo-palo43.dtb \ + omap3-overo-storm-alto35.dtb \ + omap3-overo-storm-chestnut43.dtb \ + omap3-overo-storm-gallop43.dtb \ omap3-overo-storm-palo43.dtb \ - omap3-overo-summit.dtb \ omap3-overo-storm-summit.dtb \ - omap3-overo-tobi.dtb \ omap3-overo-storm-tobi.dtb \ - omap3-gta04.dtb \ - omap3-igep0020.dtb \ - omap3-igep0030.dtb \ - omap3-lilly-dbb056.dtb \ - omap3-zoom3.dtb \ - omap4-duovero-parlor.dtb \ + omap3-overo-summit.dtb \ + omap3-overo-tobi.dtb \ + omap3-sbc-t3517.dtb \ + omap3-sbc-t3530.dtb \ + omap3-sbc-t3730.dtb \ + omap3-zoom3.dtb +dtb-$(CONFIG_SOC_AM33XX) += am335x-base0033.dtb \ + am335x-bone.dtb \ + am335x-boneblack.dtb \ + am335x-evm.dtb \ + am335x-evmsk.dtb \ + am335x-nano.dtb +dtb-$(CONFIG_ARCH_OMAP4) += omap4-duovero-parlor.dtb \ omap4-panda.dtb \ omap4-panda-a4.dtb \ omap4-panda-es.dtb \ - omap4-var-som.dtb \ omap4-sdp.dtb \ omap4-sdp-es23plus.dtb \ - omap5-uevm.dtb \ - am335x-evm.dtb \ - am335x-evmsk.dtb \ - am335x-bone.dtb \ - am335x-boneblack.dtb \ - am335x-nano.dtb \ - am335x-base0033.dtb \ - am3517-craneboard.dtb \ - am3517-evm.dtb \ - am3517_mt_ventoux.dtb \ - am43x-epos-evm.dtb \ - am437x-gp-evm.dtb \ - dra7-evm.dtb + omap4-var-dvk-om44.dtb \ + omap4-var-stk-om44.dtb +dtb-$(CONFIG_SOC_AM43XX) += am43x-epos-evm.dtb \ + am437x-gp-evm.dtb +dtb-$(CONFIG_SOC_OMAP5) += omap5-cm-t54.dtb \ + omap5-sbc-t54.dtb \ + omap5-uevm.dtb +dtb-$(CONFIG_SOC_DRA7XX) += dra7-evm.dtb \ + dra72-evm.dtb dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-d2-network.dtb \ orion5x-lacie-ethernet-disk-mini-v2.dtb \ orion5x-maxtor-shared-storage-2.dtb \ orion5x-rd88f5182-nas.dtb dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb -dtb-$(CONFIG_ARCH_QCOM) += qcom-msm8660-surf.dtb \ - qcom-msm8960-cdp.dtb \ - qcom-apq8074-dragonboard.dtb +dtb-$(CONFIG_ARCH_QCOM) += \ + qcom-apq8064-ifc6410.dtb \ + qcom-apq8074-dragonboard.dtb \ + qcom-apq8084-mtp.dtb \ + qcom-msm8660-surf.dtb \ + qcom-msm8960-cdp.dtb dtb-$(CONFIG_ARCH_S3C24XX) += s3c2416-smdk2416.dtb dtb-$(CONFIG_ARCH_S3C64XX) += s3c6410-mini6410.dtb \ s3c6410-smdk6410.dtb @@ -318,11 +337,13 @@ dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += r7s72100-genmai.dtb \ sh7372-mackerel.dtb dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += emev2-kzm9d.dtb \ r7s72100-genmai.dtb \ + r8a7791-henninger.dtb \ r8a7791-koelsch.dtb \ r8a7790-lager.dtb dtb-$(CONFIG_ARCH_SOCFPGA) += socfpga_arria5_socdk.dtb \ socfpga_cyclone5_socdk.dtb \ socfpga_cyclone5_sockit.dtb \ + socfpga_cyclone5_socrates.dtb \ socfpga_vt.dtb dtb-$(CONFIG_ARCH_SPEAR13XX) += spear1310-evb.dtb \ spear1340-evb.dtb @@ -331,24 +352,33 @@ dtb-$(CONFIG_ARCH_SPEAR3XX)+= spear300-evb.dtb \ spear320-evb.dtb \ spear320-hmi.dtb dtb-$(CONFIG_ARCH_SPEAR6XX)+= spear600-evb.dtb -dtb-$(CONFIG_ARCH_STI)+= stih415-b2000.dtb \ - stih416-b2000.dtb \ +dtb-$(CONFIG_ARCH_STI)+= stih407-b2120.dtb \ + stih415-b2000.dtb \ stih415-b2020.dtb \ - stih416-b2020.dtb -dtb-$(CONFIG_ARCH_SUNXI) += \ + stih416-b2000.dtb \ + stih416-b2020.dtb \ + stih416-b2020-revE.dtb +dtb-$(CONFIG_MACH_SUN4I) += \ sun4i-a10-a1000.dtb \ sun4i-a10-cubieboard.dtb \ sun4i-a10-mini-xplus.dtb \ sun4i-a10-hackberry.dtb \ sun4i-a10-inet97fv2.dtb \ sun4i-a10-olinuxino-lime.dtb \ - sun4i-a10-pcduino.dtb \ + sun4i-a10-pcduino.dtb +dtb-$(CONFIG_MACH_SUN5I) += \ sun5i-a10s-olinuxino-micro.dtb \ + sun5i-a10s-r7-tv-dongle.dtb \ sun5i-a13-olinuxino.dtb \ - sun5i-a13-olinuxino-micro.dtb \ + sun5i-a13-olinuxino-micro.dtb +dtb-$(CONFIG_MACH_SUN6I) += \ + sun6i-a31-app4-evb1.dtb \ sun6i-a31-colombus.dtb \ + sun6i-a31-m9.dtb +dtb-$(CONFIG_MACH_SUN7I) += \ sun7i-a20-cubieboard2.dtb \ sun7i-a20-cubietruck.dtb \ + sun7i-a20-i12-tvbox.dtb \ sun7i-a20-olinuxino-micro.dtb dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \ tegra20-iris-512.dtb \ @@ -363,7 +393,11 @@ dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \ tegra30-beaver.dtb \ tegra30-cardhu-a02.dtb \ tegra30-cardhu-a04.dtb \ + tegra30-colibri-eval-v3.dtb \ tegra114-dalmore.dtb \ + tegra114-roth.dtb \ + tegra114-tn7.dtb \ + tegra124-jetson-tk1.dtb \ tegra124-venice2.dtb dtb-$(CONFIG_ARCH_U300) += ste-u300.dtb dtb-$(CONFIG_ARCH_U8500) += ste-snowball.dtb \ diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi index 2e7d932887b5..bde1777b62be 100644 --- a/arch/arm/boot/dts/am335x-bone-common.dtsi +++ b/arch/arm/boot/dts/am335x-bone-common.dtsi @@ -182,31 +182,31 @@ &usb { status = "okay"; +}; - control@44e10620 { - status = "okay"; - }; +&usb_ctrl_mod { + status = "okay"; +}; - usb-phy@47401300 { - status = "okay"; - }; +&usb0_phy { + status = "okay"; +}; - usb-phy@47401b00 { - status = "okay"; - }; +&usb1_phy { + status = "okay"; +}; - usb@47401000 { - status = "okay"; - }; +&usb0 { + status = "okay"; +}; - usb@47401800 { - status = "okay"; - dr_mode = "host"; - }; +&usb1 { + status = "okay"; + dr_mode = "host"; +}; - dma-controller@47402000 { - status = "okay"; - }; +&cppi41dma { + status = "okay"; }; &i2c0 { @@ -280,13 +280,14 @@ pinctrl-names = "default", "sleep"; pinctrl-0 = <&cpsw_default>; pinctrl-1 = <&cpsw_sleep>; - + status = "okay"; }; &davinci_mdio { pinctrl-names = "default", "sleep"; pinctrl-0 = <&davinci_mdio_default>; pinctrl-1 = <&davinci_mdio_sleep>; + status = "okay"; }; &mmc1 { diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index 6028217ace0f..ecb267767cf5 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -268,34 +268,34 @@ lcd_pins_s0: lcd_pins_s0 { pinctrl-single,pins = < - 0x20 0x01 /* gpmc_ad8.lcd_data16, OUTPUT | MODE1 */ - 0x24 0x01 /* gpmc_ad9.lcd_data17, OUTPUT | MODE1 */ - 0x28 0x01 /* gpmc_ad10.lcd_data18, OUTPUT | MODE1 */ - 0x2c 0x01 /* gpmc_ad11.lcd_data19, OUTPUT | MODE1 */ - 0x30 0x01 /* gpmc_ad12.lcd_data20, OUTPUT | MODE1 */ - 0x34 0x01 /* gpmc_ad13.lcd_data21, OUTPUT | MODE1 */ - 0x38 0x01 /* gpmc_ad14.lcd_data22, OUTPUT | MODE1 */ - 0x3c 0x01 /* gpmc_ad15.lcd_data23, OUTPUT | MODE1 */ - 0xa0 0x00 /* lcd_data0.lcd_data0, OUTPUT | MODE0 */ - 0xa4 0x00 /* lcd_data1.lcd_data1, OUTPUT | MODE0 */ - 0xa8 0x00 /* lcd_data2.lcd_data2, OUTPUT | MODE0 */ - 0xac 0x00 /* lcd_data3.lcd_data3, OUTPUT | MODE0 */ - 0xb0 0x00 /* lcd_data4.lcd_data4, OUTPUT | MODE0 */ - 0xb4 0x00 /* lcd_data5.lcd_data5, OUTPUT | MODE0 */ - 0xb8 0x00 /* lcd_data6.lcd_data6, OUTPUT | MODE0 */ - 0xbc 0x00 /* lcd_data7.lcd_data7, OUTPUT | MODE0 */ - 0xc0 0x00 /* lcd_data8.lcd_data8, OUTPUT | MODE0 */ - 0xc4 0x00 /* lcd_data9.lcd_data9, OUTPUT | MODE0 */ - 0xc8 0x00 /* lcd_data10.lcd_data10, OUTPUT | MODE0 */ - 0xcc 0x00 /* lcd_data11.lcd_data11, OUTPUT | MODE0 */ - 0xd0 0x00 /* lcd_data12.lcd_data12, OUTPUT | MODE0 */ - 0xd4 0x00 /* lcd_data13.lcd_data13, OUTPUT | MODE0 */ - 0xd8 0x00 /* lcd_data14.lcd_data14, OUTPUT | MODE0 */ - 0xdc 0x00 /* lcd_data15.lcd_data15, OUTPUT | MODE0 */ - 0xe0 0x00 /* lcd_vsync.lcd_vsync, OUTPUT | MODE0 */ - 0xe4 0x00 /* lcd_hsync.lcd_hsync, OUTPUT | MODE0 */ - 0xe8 0x00 /* lcd_pclk.lcd_pclk, OUTPUT | MODE0 */ - 0xec 0x00 /* lcd_ac_bias_en.lcd_ac_bias_en, OUTPUT | MODE0 */ + 0x20 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad8.lcd_data23 */ + 0x24 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad9.lcd_data22 */ + 0x28 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad10.lcd_data21 */ + 0x2c (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad11.lcd_data20 */ + 0x30 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad12.lcd_data19 */ + 0x34 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad13.lcd_data18 */ + 0x38 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad14.lcd_data17 */ + 0x3c (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad15.lcd_data16 */ + 0xa0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */ + 0xa4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */ + 0xa8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */ + 0xac (PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */ + 0xb0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */ + 0xb4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */ + 0xb8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */ + 0xbc (PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */ + 0xc0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */ + 0xc4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */ + 0xc8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */ + 0xcc (PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */ + 0xd0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */ + 0xd4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */ + 0xd8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */ + 0xdc (PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */ + 0xe0 (PIN_OUTPUT | MUX_MODE0) /* lcd_vsync.lcd_vsync */ + 0xe4 (PIN_OUTPUT | MUX_MODE0) /* lcd_hsync.lcd_hsync */ + 0xe8 (PIN_OUTPUT | MUX_MODE0) /* lcd_pclk.lcd_pclk */ + 0xec (PIN_OUTPUT | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */ >; }; @@ -330,31 +330,31 @@ &usb { status = "okay"; +}; - control@44e10620 { - status = "okay"; - }; +&usb_ctrl_mod { + status = "okay"; +}; - usb-phy@47401300 { - status = "okay"; - }; +&usb0_phy { + status = "okay"; +}; - usb-phy@47401b00 { - status = "okay"; - }; +&usb1_phy { + status = "okay"; +}; - usb@47401000 { - status = "okay"; - }; +&usb0 { + status = "okay"; +}; - usb@47401800 { - status = "okay"; - dr_mode = "host"; - }; +&usb1 { + status = "okay"; + dr_mode = "host"; +}; - dma-controller@47402000 { - status = "okay"; - }; +&cppi41dma { + status = "okay"; }; &i2c1 { @@ -614,12 +614,14 @@ pinctrl-names = "default", "sleep"; pinctrl-0 = <&cpsw_default>; pinctrl-1 = <&cpsw_sleep>; + status = "okay"; }; &davinci_mdio { pinctrl-names = "default", "sleep"; pinctrl-0 = <&davinci_mdio_default>; pinctrl-1 = <&davinci_mdio_sleep>; + status = "okay"; }; &cpsw_emac0 { diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts index ab238850a7b2..ab9a34ce524c 100644 --- a/arch/arm/boot/dts/am335x-evmsk.dts +++ b/arch/arm/boot/dts/am335x-evmsk.dts @@ -57,6 +57,17 @@ enable-active-high; }; + vtt_fixed: fixedregulator@3 { + compatible = "regulator-fixed"; + regulator-name = "vtt"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + gpio = <&gpio0 7 GPIO_ACTIVE_HIGH>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + }; + leds { pinctrl-names = "default"; pinctrl-0 = <&user_leds_s0>; @@ -363,31 +374,31 @@ &usb { status = "okay"; +}; - control@44e10620 { - status = "okay"; - }; +&usb_ctrl_mod { + status = "okay"; +}; - usb-phy@47401300 { - status = "okay"; - }; +&usb0_phy { + status = "okay"; +}; - usb-phy@47401b00 { - status = "okay"; - }; +&usb1_phy { + status = "okay"; +}; - usb@47401000 { - status = "okay"; - }; +&usb0 { + status = "okay"; +}; - usb@47401800 { - status = "okay"; - dr_mode = "host"; - }; +&usb1 { + status = "okay"; + dr_mode = "host"; +}; - dma-controller@47402000 { - status = "okay"; - }; +&cppi41dma { + status = "okay"; }; &epwmss2 { @@ -484,12 +495,14 @@ pinctrl-0 = <&cpsw_default>; pinctrl-1 = <&cpsw_sleep>; dual_emac = <1>; + status = "okay"; }; &davinci_mdio { pinctrl-names = "default", "sleep"; pinctrl-0 = <&davinci_mdio_default>; pinctrl-1 = <&davinci_mdio_sleep>; + status = "okay"; }; &cpsw_emac0 { diff --git a/arch/arm/boot/dts/am335x-igep0033.dtsi b/arch/arm/boot/dts/am335x-igep0033.dtsi index 9f22c189f636..8a0a72dc7dd7 100644 --- a/arch/arm/boot/dts/am335x-igep0033.dtsi +++ b/arch/arm/boot/dts/am335x-igep0033.dtsi @@ -95,6 +95,14 @@ }; }; +&mac { + status = "okay"; +}; + +&davinci_mdio { + status = "okay"; +}; + &cpsw_emac0 { phy_id = <&davinci_mdio>, <0>; }; @@ -200,31 +208,31 @@ &usb { status = "okay"; +}; - control@44e10620 { - status = "okay"; - }; +&usb_ctrl_mod { + status = "okay"; +}; - usb-phy@47401300 { - status = "okay"; - }; +&usb0_phy { + status = "okay"; +}; - usb-phy@47401b00 { - status = "okay"; - }; +&usb1_phy { + status = "okay"; +}; - usb@47401000 { - status = "okay"; - }; +&usb0 { + status = "okay"; +}; - usb@47401800 { - status = "okay"; - dr_mode = "host"; - }; +&usb1 { + status = "okay"; + dr_mode = "host"; +}; - dma-controller@47402000 { - status = "okay"; - }; +&cppi41dma { + status = "okay"; }; #include "tps65910.dtsi" diff --git a/arch/arm/boot/dts/am335x-nano.dts b/arch/arm/boot/dts/am335x-nano.dts index 9907b494b99c..a3466455b171 100644 --- a/arch/arm/boot/dts/am335x-nano.dts +++ b/arch/arm/boot/dts/am335x-nano.dts @@ -344,6 +344,11 @@ &mac { dual_emac = <1>; + status = "okay"; +}; + +&davinci_mdio { + status = "okay"; }; &cpsw_emac0 { diff --git a/arch/arm/boot/dts/am33xx-clocks.dtsi b/arch/arm/boot/dts/am33xx-clocks.dtsi index 9ccfe508dea2..712edce7d6fb 100644 --- a/arch/arm/boot/dts/am33xx-clocks.dtsi +++ b/arch/arm/boot/dts/am33xx-clocks.dtsi @@ -96,47 +96,29 @@ clock-div = <1>; }; - ehrpwm0_gate_tbclk: ehrpwm0_gate_tbclk { + ehrpwm0_tbclk: ehrpwm0_tbclk@44e10664 { #clock-cells = <0>; - compatible = "ti,composite-no-wait-gate-clock"; + compatible = "ti,gate-clock"; clocks = <&dpll_per_m2_ck>; ti,bit-shift = <0>; reg = <0x0664>; }; - ehrpwm0_tbclk: ehrpwm0_tbclk { - #clock-cells = <0>; - compatible = "ti,composite-clock"; - clocks = <&ehrpwm0_gate_tbclk>; - }; - - ehrpwm1_gate_tbclk: ehrpwm1_gate_tbclk { + ehrpwm1_tbclk: ehrpwm1_tbclk@44e10664 { #clock-cells = <0>; - compatible = "ti,composite-no-wait-gate-clock"; + compatible = "ti,gate-clock"; clocks = <&dpll_per_m2_ck>; ti,bit-shift = <1>; reg = <0x0664>; }; - ehrpwm1_tbclk: ehrpwm1_tbclk { - #clock-cells = <0>; - compatible = "ti,composite-clock"; - clocks = <&ehrpwm1_gate_tbclk>; - }; - - ehrpwm2_gate_tbclk: ehrpwm2_gate_tbclk { + ehrpwm2_tbclk: ehrpwm2_tbclk@44e10664 { #clock-cells = <0>; - compatible = "ti,composite-no-wait-gate-clock"; + compatible = "ti,gate-clock"; clocks = <&dpll_per_m2_ck>; ti,bit-shift = <2>; reg = <0x0664>; }; - - ehrpwm2_tbclk: ehrpwm2_tbclk { - #clock-cells = <0>; - compatible = "ti,composite-clock"; - clocks = <&ehrpwm2_gate_tbclk>; - }; }; &prcm_clocks { clk_32768_ck: clk_32768_ck { diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 7ad75b4e0663..586397cf6e9c 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -688,6 +688,7 @@ */ interrupts = <40 41 42 43>; ranges; + status = "disabled"; davinci_mdio: mdio@4a101000 { compatible = "ti,davinci_mdio"; @@ -696,6 +697,7 @@ ti,hwmods = "davinci_mdio"; bus_freq = <1000000>; reg = <0x4a101000 0x100>; + status = "disabled"; }; cpsw_emac0: slave@4a100200 { diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index d547009148da..1704e853f163 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -525,6 +525,12 @@ /* Filled in by U-Boot */ mac-address = [ 00 00 00 00 00 00 ]; }; + + phy_sel: cpsw-phy-sel@44e10650 { + compatible = "ti,am43xx-cpsw-phy-sel"; + reg= <0x44e10650 0x4>; + reg-names = "gmii-sel"; + }; }; epwmss0: epwmss@48300000 { @@ -739,6 +745,121 @@ #size-cells = <1>; status = "disabled"; }; + + am43xx_control_usb2phy1: control-phy@44e10620 { + compatible = "ti,control-phy-usb2-am437"; + reg = <0x44e10620 0x4>; + reg-names = "power"; + }; + + am43xx_control_usb2phy2: control-phy@0x44e10628 { + compatible = "ti,control-phy-usb2-am437"; + reg = <0x44e10628 0x4>; + reg-names = "power"; + }; + + ocp2scp0: ocp2scp@483a8000 { + compatible = "ti,omap-ocp2scp"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + ti,hwmods = "ocp2scp0"; + + usb2_phy1: phy@483a8000 { + compatible = "ti,am437x-usb2"; + reg = <0x483a8000 0x8000>; + ctrl-module = <&am43xx_control_usb2phy1>; + clocks = <&usb_phy0_always_on_clk32k>, + <&usb_otg_ss0_refclk960m>; + clock-names = "wkupclk", "refclk"; + #phy-cells = <0>; + status = "disabled"; + }; + }; + + ocp2scp1: ocp2scp@483e8000 { + compatible = "ti,omap-ocp2scp"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + ti,hwmods = "ocp2scp1"; + + usb2_phy2: phy@483e8000 { + compatible = "ti,am437x-usb2"; + reg = <0x483e8000 0x8000>; + ctrl-module = <&am43xx_control_usb2phy2>; + clocks = <&usb_phy1_always_on_clk32k>, + <&usb_otg_ss1_refclk960m>; + clock-names = "wkupclk", "refclk"; + #phy-cells = <0>; + status = "disabled"; + }; + }; + + dwc3_1: omap_dwc3@48380000 { + compatible = "ti,am437x-dwc3"; + ti,hwmods = "usb_otg_ss0"; + reg = <0x48380000 0x10000>; + interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <1>; + utmi-mode = <1>; + ranges; + + usb1: usb@48390000 { + compatible = "synopsys,dwc3"; + reg = <0x48390000 0x17000>; + interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usb2_phy1>; + phy-names = "usb2-phy"; + maximum-speed = "high-speed"; + dr_mode = "otg"; + status = "disabled"; + }; + }; + + dwc3_2: omap_dwc3@483c0000 { + compatible = "ti,am437x-dwc3"; + ti,hwmods = "usb_otg_ss1"; + reg = <0x483c0000 0x10000>; + interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <1>; + utmi-mode = <1>; + ranges; + + usb2: usb@483d0000 { + compatible = "synopsys,dwc3"; + reg = <0x483d0000 0x17000>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usb2_phy2>; + phy-names = "usb2-phy"; + maximum-speed = "high-speed"; + dr_mode = "otg"; + status = "disabled"; + }; + }; + + qspi: qspi@47900000 { + compatible = "ti,am4372-qspi"; + reg = <0x47900000 0x100>; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "qspi"; + interrupts = <0 138 0x4>; + num-cs = <4>; + status = "disabled"; + }; + + hdq: hdq@48347000 { + compatible = "ti,am43xx-hdq"; + reg = <0x48347000 0x1000>; + interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&func_12m_clk>; + clock-names = "fck"; + ti,hwmods = "hdq1w"; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts index a055f7f0f14a..c25d15837ce9 100644 --- a/arch/arm/boot/dts/am437x-gp-evm.dts +++ b/arch/arm/boot/dts/am437x-gp-evm.dts @@ -27,6 +27,17 @@ enable-active-high; }; + vtt_fixed: fixedregulator-vtt { + compatible = "regulator-fixed"; + regulator-name = "vtt_fixed"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>; + }; + backlight { compatible = "pwm-backlight"; pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>; @@ -81,6 +92,85 @@ 0x164 MUX_MODE0 /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */ >; }; + + pixcir_ts_pins: pixcir_ts_pins { + pinctrl-single,pins = < + 0x264 (PIN_INPUT_PULLUP | MUX_MODE7) /* spi2_d0.gpio3_22 */ + >; + }; + + cpsw_default: cpsw_default { + pinctrl-single,pins = < + /* Slave 1 */ + 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_txen */ + 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rxctl */ + 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_txd3 */ + 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_txd2 */ + 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_txd1 */ + 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_txd0 */ + 0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rmii1_tclk */ + 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rmii1_rclk */ + 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rxd3 */ + 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rxd2 */ + 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rxd1 */ + 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rxd0 */ + >; + }; + + cpsw_sleep: cpsw_sleep { + pinctrl-single,pins = < + /* Slave 1 reset value */ + 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + davinci_mdio_default: davinci_mdio_default { + pinctrl-single,pins = < + /* MDIO */ + 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ + 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + >; + }; + + davinci_mdio_sleep: davinci_mdio_sleep { + pinctrl-single,pins = < + /* MDIO reset value */ + 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + nand_flash_x8: nand_flash_x8 { + pinctrl-single,pins = < + 0x26c(PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* spi2_cs0.gpio/eMMCorNANDsel */ + 0x0 (PIN_INPUT | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */ + 0x4 (PIN_INPUT | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */ + 0x8 (PIN_INPUT | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */ + 0xc (PIN_INPUT | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */ + 0x10 (PIN_INPUT | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */ + 0x14 (PIN_INPUT | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */ + 0x18 (PIN_INPUT | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */ + 0x1c (PIN_INPUT | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */ + 0x70 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */ + 0x74 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpmc_wpn */ + 0x7c (PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */ + 0x90 (PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */ + 0x94 (PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */ + 0x98 (PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */ + 0x9c (PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */ + >; + }; }; &i2c0 { @@ -93,6 +183,20 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&i2c1_pins>; + + pixcir_ts@5c { + compatible = "pixcir,pixcir_tangoc"; + pinctrl-names = "default"; + pinctrl-0 = <&pixcir_ts_pins>; + reg = <0x5c>; + interrupt-parent = <&gpio3>; + interrupts = <22 0>; + + attb-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; + + x-size = <1024>; + y-size = <600>; + }; }; &epwmss0 { @@ -130,3 +234,128 @@ pinctrl-0 = <&mmc1_pins>; cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; }; + +&usb2_phy1 { + status = "okay"; +}; + +&usb1 { + dr_mode = "peripheral"; + status = "okay"; +}; + +&usb2_phy2 { + status = "okay"; +}; + +&usb2 { + dr_mode = "host"; + status = "okay"; +}; + +&mac { + slaves = <1>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cpsw_default>; + pinctrl-1 = <&cpsw_sleep>; + status = "okay"; +}; + +&davinci_mdio { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&davinci_mdio_default>; + pinctrl-1 = <&davinci_mdio_sleep>; + status = "okay"; +}; + +&cpsw_emac0 { + phy_id = <&davinci_mdio>, <0>; + phy-mode = "rgmii"; +}; + +&elm { + status = "okay"; +}; + +&gpmc { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&nand_flash_x8>; + ranges = <0 0 0 0x01000000>; /* minimum GPMC partition = 16MB */ + nand@0,0 { + reg = <0 0 4>; /* device IO registers */ + ti,nand-ecc-opt = "bch8"; + ti,elm-id = <&elm>; + nand-bus-width = <8>; + gpmc,device-width = <1>; + gpmc,sync-clk-ps = <0>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <40>; + gpmc,cs-wr-off-ns = <40>; + gpmc,adv-on-ns = <0>; + gpmc,adv-rd-off-ns = <25>; + gpmc,adv-wr-off-ns = <25>; + gpmc,we-on-ns = <0>; + gpmc,we-off-ns = <20>; + gpmc,oe-on-ns = <3>; + gpmc,oe-off-ns = <30>; + gpmc,access-ns = <30>; + gpmc,rd-cycle-ns = <40>; + gpmc,wr-cycle-ns = <40>; + gpmc,wait-pin = <0>; + gpmc,wait-on-read; + gpmc,wait-on-write; + gpmc,bus-turnaround-ns = <0>; + gpmc,cycle2cycle-delay-ns = <0>; + gpmc,clk-activation-ns = <0>; + gpmc,wait-monitoring-ns = <0>; + gpmc,wr-access-ns = <40>; + gpmc,wr-data-mux-bus-ns = <0>; + /* MTD partition table */ + /* All SPL-* partitions are sized to minimal length + * which can be independently programmable. For + * NAND flash this is equal to size of erase-block */ + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "NAND.SPL"; + reg = <0x00000000 0x00040000>; + }; + partition@1 { + label = "NAND.SPL.backup1"; + reg = <0x00040000 0x00040000>; + }; + partition@2 { + label = "NAND.SPL.backup2"; + reg = <0x00080000 0x00040000>; + }; + partition@3 { + label = "NAND.SPL.backup3"; + reg = <0x000c0000 0x00040000>; + }; + partition@4 { + label = "NAND.u-boot-spl-os"; + reg = <0x00100000 0x00080000>; + }; + partition@5 { + label = "NAND.u-boot"; + reg = <0x00180000 0x00100000>; + }; + partition@6 { + label = "NAND.u-boot-env"; + reg = <0x00280000 0x00040000>; + }; + partition@7 { + label = "NAND.u-boot-env.backup1"; + reg = <0x002c0000 0x00040000>; + }; + partition@8 { + label = "NAND.kernel"; + reg = <0x00300000 0x00700000>; + }; + partition@9 { + label = "NAND.file-system"; + reg = <0x00a00000 0x1f600000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts index 2836328b90c8..ad362c50e32e 100644 --- a/arch/arm/boot/dts/am43x-epos-evm.dts +++ b/arch/arm/boot/dts/am43x-epos-evm.dts @@ -138,6 +138,29 @@ 0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */ >; }; + + qspi1_default: qspi1_default { + pinctrl-single,pins = < + 0x7c (PIN_INPUT_PULLUP | MUX_MODE3) + 0x88 (PIN_INPUT_PULLUP | MUX_MODE2) + 0x90 (PIN_INPUT_PULLUP | MUX_MODE3) + 0x94 (PIN_INPUT_PULLUP | MUX_MODE3) + 0x98 (PIN_INPUT_PULLUP | MUX_MODE3) + 0x9c (PIN_INPUT_PULLUP | MUX_MODE3) + >; + }; + + pixcir_ts_pins: pixcir_ts_pins { + pinctrl-single,pins = < + 0x44 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_a1.gpio1_17 */ + >; + }; + + hdq_pins: pinmux_hdq_pins { + pinctrl-single,pins = < + 0x234 (PIN_INPUT_PULLUP | MUX_MODE1) /* cam1_wen.hdq_gpio */ + >; + }; }; matrix_keypad: matrix_keypad@0 { @@ -226,7 +249,9 @@ }; pixcir_ts@5c { - compatible = "pixcir,pixcir_ts"; + compatible = "pixcir,pixcir_tangoc"; + pinctrl-names = "default"; + pinctrl-0 = <&pixcir_ts_pins>; reg = <0x5c>; interrupt-parent = <&gpio1>; interrupts = <17 0>; @@ -234,7 +259,7 @@ attb-gpio = <&gpio1 17 GPIO_ACTIVE_HIGH>; x-size = <1024>; - y-size = <768>; + y-size = <600>; }; }; @@ -367,3 +392,79 @@ pinctrl-0 = <&spi1_pins>; status = "okay"; }; + +&usb2_phy1 { + status = "okay"; +}; + +&usb1 { + dr_mode = "peripheral"; + status = "okay"; +}; + +&usb2_phy2 { + status = "okay"; +}; + +&usb2 { + dr_mode = "host"; + status = "okay"; +}; + +&qspi { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&qspi1_default>; + + spi-max-frequency = <48000000>; + m25p80@0 { + compatible = "mx66l51235l"; + spi-max-frequency = <48000000>; + reg = <0>; + spi-cpol; + spi-cpha; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; + #address-cells = <1>; + #size-cells = <1>; + + /* MTD partition table. + * The ROM checks the first 512KiB + * for a valid file to boot(XIP). + */ + partition@0 { + label = "QSPI.U_BOOT"; + reg = <0x00000000 0x000080000>; + }; + partition@1 { + label = "QSPI.U_BOOT.backup"; + reg = <0x00080000 0x00080000>; + }; + partition@2 { + label = "QSPI.U-BOOT-SPL_OS"; + reg = <0x00100000 0x00010000>; + }; + partition@3 { + label = "QSPI.U_BOOT_ENV"; + reg = <0x00110000 0x00010000>; + }; + partition@4 { + label = "QSPI.U-BOOT-ENV.backup"; + reg = <0x00120000 0x00010000>; + }; + partition@5 { + label = "QSPI.KERNEL"; + reg = <0x00130000 0x0800000>; + }; + partition@6 { + label = "QSPI.FILESYSTEM"; + reg = <0x00930000 0x36D0000>; + }; + }; +}; + +&hdq { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&hdq_pins>; +}; diff --git a/arch/arm/boot/dts/am43xx-clocks.dtsi b/arch/arm/boot/dts/am43xx-clocks.dtsi index 142009cc9332..c7dc9dab93a4 100644 --- a/arch/arm/boot/dts/am43xx-clocks.dtsi +++ b/arch/arm/boot/dts/am43xx-clocks.dtsi @@ -11,6 +11,22 @@ sys_clkin_ck: sys_clkin_ck { #clock-cells = <0>; compatible = "ti,mux-clock"; + clocks = <&sysboot_freq_sel_ck>, <&crystal_freq_sel_ck>; + ti,bit-shift = <31>; + reg = <0x0040>; + }; + + crystal_freq_sel_ck: crystal_freq_sel_ck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&virt_19200000_ck>, <&virt_24000000_ck>, <&virt_25000000_ck>, <&virt_26000000_ck>; + ti,bit-shift = <29>; + reg = <0x0040>; + }; + + sysboot_freq_sel_ck: sysboot_freq_sel_ck@44e10040 { + #clock-cells = <0>; + compatible = "ti,mux-clock"; clocks = <&virt_19200000_ck>, <&virt_24000000_ck>, <&virt_25000000_ck>, <&virt_26000000_ck>; ti,bit-shift = <22>; reg = <0x0040>; @@ -87,6 +103,54 @@ clock-mult = <1>; clock-div = <1>; }; + + ehrpwm0_tbclk: ehrpwm0_tbclk { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&dpll_per_m2_ck>; + ti,bit-shift = <0>; + reg = <0x0664>; + }; + + ehrpwm1_tbclk: ehrpwm1_tbclk { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&dpll_per_m2_ck>; + ti,bit-shift = <1>; + reg = <0x0664>; + }; + + ehrpwm2_tbclk: ehrpwm2_tbclk { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&dpll_per_m2_ck>; + ti,bit-shift = <2>; + reg = <0x0664>; + }; + + ehrpwm3_tbclk: ehrpwm3_tbclk { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&dpll_per_m2_ck>; + ti,bit-shift = <4>; + reg = <0x0664>; + }; + + ehrpwm4_tbclk: ehrpwm4_tbclk { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&dpll_per_m2_ck>; + ti,bit-shift = <5>; + reg = <0x0664>; + }; + + ehrpwm5_tbclk: ehrpwm5_tbclk { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&dpll_per_m2_ck>; + ti,bit-shift = <6>; + reg = <0x0664>; + }; }; &prcm_clocks { clk_32768_ck: clk_32768_ck { @@ -229,6 +293,7 @@ reg = <0x2e30>; ti,index-starts-at-one; ti,invert-autoidle-bit; + ti,set-rate-parent; }; dpll_per_ck: dpll_per_ck { @@ -511,6 +576,7 @@ compatible = "ti,mux-clock"; clocks = <&dpll_disp_m2_ck>, <&dpll_core_m5_ck>, <&dpll_per_m2_ck>; reg = <0x4244>; + ti,set-rate-parent; }; dpll_extdev_ck: dpll_extdev_ck { @@ -609,10 +675,13 @@ dpll_per_clkdcoldo: dpll_per_clkdcoldo { #clock-cells = <0>; - compatible = "fixed-factor-clock"; + compatible = "ti,fixed-factor-clock"; clocks = <&dpll_per_ck>; - clock-mult = <1>; - clock-div = <1>; + ti,clock-mult = <1>; + ti,clock-div = <1>; + ti,autoidle-shift = <8>; + reg = <0x2e14>; + ti,invert-autoidle-bit; }; dll_aging_clk_div: dll_aging_clk_div { @@ -653,4 +722,36 @@ clocks = <&clk_32768_ck>, <&clk_32k_tpm_ck>; reg = <0x4260>; }; + + usb_phy0_always_on_clk32k: usb_phy0_always_on_clk32k { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&usbphy_32khz_clkmux>; + ti,bit-shift = <8>; + reg = <0x2a40>; + }; + + usb_phy1_always_on_clk32k: usb_phy1_always_on_clk32k { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&usbphy_32khz_clkmux>; + ti,bit-shift = <8>; + reg = <0x2a48>; + }; + + usb_otg_ss0_refclk960m: usb_otg_ss0_refclk960m { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&dpll_per_clkdcoldo>; + ti,bit-shift = <8>; + reg = <0x8a60>; + }; + + usb_otg_ss1_refclk960m: usb_otg_ss1_refclk960m { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&dpll_per_clkdcoldo>; + ti,bit-shift = <8>; + reg = <0x8a68>; + }; }; diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts index 3383c4b66803..416f4e5a69c1 100644 --- a/arch/arm/boot/dts/armada-370-db.dts +++ b/arch/arm/boot/dts/armada-370-db.dts @@ -35,7 +35,6 @@ internal-regs { serial@12000 { - clock-frequency = <200000000>; status = "okay"; }; sata@a0000 { diff --git a/arch/arm/boot/dts/armada-370-mirabox.dts b/arch/arm/boot/dts/armada-370-mirabox.dts index 2354fe023ee0..097df7d8f0f6 100644 --- a/arch/arm/boot/dts/armada-370-mirabox.dts +++ b/arch/arm/boot/dts/armada-370-mirabox.dts @@ -47,7 +47,6 @@ internal-regs { serial@12000 { - clock-frequency = <200000000>; status = "okay"; }; timer@20300 { diff --git a/arch/arm/boot/dts/armada-370-netgear-rn102.dts b/arch/arm/boot/dts/armada-370-netgear-rn102.dts index 651aeb5ef439..d6d572e5af32 100644 --- a/arch/arm/boot/dts/armada-370-netgear-rn102.dts +++ b/arch/arm/boot/dts/armada-370-netgear-rn102.dts @@ -50,7 +50,6 @@ internal-regs { serial@12000 { - clock-frequency = <200000000>; status = "okay"; }; diff --git a/arch/arm/boot/dts/armada-370-netgear-rn104.dts b/arch/arm/boot/dts/armada-370-netgear-rn104.dts index 4e27587667bf..c5fe8b5dcdc7 100644 --- a/arch/arm/boot/dts/armada-370-netgear-rn104.dts +++ b/arch/arm/boot/dts/armada-370-netgear-rn104.dts @@ -50,7 +50,6 @@ internal-regs { serial@12000 { - clock-frequency = <200000000>; status = "okay"; }; diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts index 3e2c857d6000..4169f4096ea3 100644 --- a/arch/arm/boot/dts/armada-370-rd.dts +++ b/arch/arm/boot/dts/armada-370-rd.dts @@ -51,7 +51,6 @@ internal-regs { serial@12000 { - clock-frequency = <200000000>; status = "okay"; }; sata@a0000 { diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi index bb77970c0b12..23227e0027ec 100644 --- a/arch/arm/boot/dts/armada-370-xp.dtsi +++ b/arch/arm/boot/dts/armada-370-xp.dtsi @@ -157,6 +157,7 @@ reg-shift = <2>; interrupts = <41>; reg-io-width = <1>; + clocks = <&coreclk 0>; status = "disabled"; }; serial@12100 { @@ -165,6 +166,7 @@ reg-shift = <2>; interrupts = <42>; reg-io-width = <1>; + clocks = <&coreclk 0>; status = "disabled"; }; @@ -203,6 +205,11 @@ reg = <0x20300 0x34>, <0x20704 0x4>; }; + pmsu@22000 { + compatible = "marvell,armada-370-pmsu"; + reg = <0x22000 0x1000>; + }; + usb@50000 { compatible = "marvell,orion-ehci"; reg = <0x50000 0x500>; diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi index af1f11e9e5a0..21b588b6f6bd 100644 --- a/arch/arm/boot/dts/armada-370.dtsi +++ b/arch/arm/boot/dts/armada-370.dtsi @@ -220,6 +220,11 @@ clocks = <&coreclk 2>; }; + cpurst@20800 { + compatible = "marvell,armada-370-cpu-reset"; + reg = <0x20800 0x8>; + }; + audio_controller: audio-controller@30000 { compatible = "marvell,armada370-audio"; reg = <0x30000 0x4000>; diff --git a/arch/arm/boot/dts/armada-375-db.dts b/arch/arm/boot/dts/armada-375-db.dts index 0451124e8ebf..772fec2d26ce 100644 --- a/arch/arm/boot/dts/armada-375-db.dts +++ b/arch/arm/boot/dts/armada-375-db.dts @@ -68,7 +68,6 @@ }; serial@12000 { - clock-frequency = <200000000>; status = "okay"; }; @@ -107,6 +106,14 @@ }; }; + usb@54000 { + status = "okay"; + }; + + usb3@58000 { + status = "okay"; + }; + mvsdio@d4000 { pinctrl-0 = <&sdio_pins &sdio_st_pins>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/armada-375.dtsi b/arch/arm/boot/dts/armada-375.dtsi index 3877693fb2d8..fb92551a1e71 100644 --- a/arch/arm/boot/dts/armada-375.dtsi +++ b/arch/arm/boot/dts/armada-375.dtsi @@ -39,6 +39,8 @@ cpus { #address-cells = <1>; #size-cells = <0>; + enable-method = "marvell,armada-375-smp"; + cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a9"; @@ -128,6 +130,11 @@ cache-level = <2>; }; + scu@c000 { + compatible = "arm,cortex-a9-scu"; + reg = <0xc000 0x58>; + }; + timer@c600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0xc600 0x20>; @@ -194,6 +201,7 @@ reg-shift = <2>; interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; reg-io-width = <1>; + clocks = <&coreclk 0>; status = "disabled"; }; @@ -203,6 +211,7 @@ reg-shift = <2>; interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; reg-io-width = <1>; + clocks = <&coreclk 0>; status = "disabled"; }; @@ -320,6 +329,46 @@ clocks = <&coreclk 0>; }; + watchdog@20300 { + compatible = "marvell,armada-375-wdt"; + reg = <0x20300 0x34>, <0x20704 0x4>, <0x18254 0x4>; + clocks = <&coreclk 0>; + }; + + cpurst@20800 { + compatible = "marvell,armada-370-cpu-reset"; + reg = <0x20800 0x10>; + }; + + coherency-fabric@21010 { + compatible = "marvell,armada-375-coherency-fabric"; + reg = <0x21010 0x1c>; + }; + + usb@50000 { + compatible = "marvell,orion-ehci"; + reg = <0x50000 0x500>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gateclk 18>; + status = "disabled"; + }; + + usb@54000 { + compatible = "marvell,orion-ehci"; + reg = <0x54000 0x500>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gateclk 26>; + status = "disabled"; + }; + + usb3@58000 { + compatible = "marvell,armada-375-xhci"; + reg = <0x58000 0x20000>,<0x5b880 0x80>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gateclk 16>; + status = "disabled"; + }; + xor@60800 { compatible = "marvell,orion-xor"; reg = <0x60800 0x100 @@ -391,6 +440,12 @@ status = "disabled"; }; + thermal@e8078 { + compatible = "marvell,armada375-thermal"; + reg = <0xe8078 0x4>, <0xe807c 0x8>; + status = "okay"; + }; + coreclk: mvebu-sar@e8204 { compatible = "marvell,armada-375-core-clock"; reg = <0xe8204 0x04>; diff --git a/arch/arm/boot/dts/armada-380.dtsi b/arch/arm/boot/dts/armada-380.dtsi index 6d0f03c98ee9..e69bc6759c39 100644 --- a/arch/arm/boot/dts/armada-380.dtsi +++ b/arch/arm/boot/dts/armada-380.dtsi @@ -21,6 +21,8 @@ cpus { #address-cells = <1>; #size-cells = <0>; + enable-method = "marvell,armada-380-smp"; + cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a9"; diff --git a/arch/arm/boot/dts/armada-385-db.dts b/arch/arm/boot/dts/armada-385-db.dts index 6828d77696a6..ff9637dd8d0f 100644 --- a/arch/arm/boot/dts/armada-385-db.dts +++ b/arch/arm/boot/dts/armada-385-db.dts @@ -55,7 +55,6 @@ }; serial@12000 { - clock-frequency = <200000000>; status = "okay"; }; @@ -65,6 +64,10 @@ phy-mode = "rgmii-id"; }; + usb@50000 { + status = "ok"; + }; + ethernet@70000 { status = "okay"; phy = <&phy0>; @@ -81,6 +84,14 @@ }; }; + sata@a8000 { + status = "okay"; + }; + + sata@e0000 { + status = "okay"; + }; + flash@d0000 { status = "okay"; num-cs = <1>; @@ -101,6 +112,22 @@ reg = <0x1000000 0x3f000000>; }; }; + + sdhci@d8000 { + clock-frequency = <200000000>; + broken-cd; + wp-inverted; + bus-width = <8>; + status = "okay"; + }; + + usb3@f0000 { + status = "okay"; + }; + + usb3@f8000 { + status = "okay"; + }; }; pcie-controller { diff --git a/arch/arm/boot/dts/armada-385-rd.dts b/arch/arm/boot/dts/armada-385-rd.dts index 45250c88814b..40893255a3f0 100644 --- a/arch/arm/boot/dts/armada-385-rd.dts +++ b/arch/arm/boot/dts/armada-385-rd.dts @@ -51,7 +51,6 @@ }; serial@12000 { - clock-frequency = <200000000>; status = "okay"; }; @@ -77,6 +76,10 @@ reg = <1>; }; }; + + usb3@f0000 { + status = "okay"; + }; }; pcie-controller { diff --git a/arch/arm/boot/dts/armada-385.dtsi b/arch/arm/boot/dts/armada-385.dtsi index da801964a257..f011009bf4cf 100644 --- a/arch/arm/boot/dts/armada-385.dtsi +++ b/arch/arm/boot/dts/armada-385.dtsi @@ -21,6 +21,8 @@ cpus { #address-cells = <1>; #size-cells = <0>; + enable-method = "marvell,armada-380-smp"; + cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a9"; diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi index ca8813bb99ba..3de364e81b52 100644 --- a/arch/arm/boot/dts/armada-38x.dtsi +++ b/arch/arm/boot/dts/armada-38x.dtsi @@ -108,6 +108,11 @@ cache-level = <2>; }; + scu@c000 { + compatible = "arm,cortex-a9-scu"; + reg = <0xc000 0x58>; + }; + timer@c600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0xc600 0x20>; @@ -174,6 +179,7 @@ reg-shift = <2>; interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; reg-io-width = <1>; + clocks = <&coreclk 0>; status = "disabled"; }; @@ -183,6 +189,7 @@ reg-shift = <2>; interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; reg-io-width = <1>; + clocks = <&coreclk 0>; status = "disabled"; }; @@ -267,6 +274,28 @@ clock-names = "nbclk", "fixed"; }; + watchdog@20300 { + compatible = "marvell,armada-380-wdt"; + reg = <0x20300 0x34>, <0x20704 0x4>, <0x18260 0x4>; + clocks = <&coreclk 2>, <&refclk>; + clock-names = "nbclk", "fixed"; + }; + + cpurst@20800 { + compatible = "marvell,armada-370-cpu-reset"; + reg = <0x20800 0x10>; + }; + + coherency-fabric@21010 { + compatible = "marvell,armada-380-coherency-fabric"; + reg = <0x21010 0x1c>; + }; + + pmsu@22000 { + compatible = "marvell,armada-380-pmsu"; + reg = <0x22000 0x1000>; + }; + eth1: ethernet@30000 { compatible = "marvell,armada-370-neta"; reg = <0x30000 0x4000>; @@ -283,6 +312,14 @@ status = "disabled"; }; + usb@50000 { + compatible = "marvell,orion-ehci"; + reg = <0x58000 0x500>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gateclk 18>; + status = "disabled"; + }; + xor@60800 { compatible = "marvell,orion-xor"; reg = <0x60800 0x100 @@ -339,6 +376,22 @@ clocks = <&gateclk 4>; }; + sata@a8000 { + compatible = "marvell,armada-380-ahci"; + reg = <0xa8000 0x2000>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gateclk 15>; + status = "disabled"; + }; + + sata@e0000 { + compatible = "marvell,armada-380-ahci"; + reg = <0xe0000 0x2000>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gateclk 30>; + status = "disabled"; + }; + coredivclk: clock@e4250 { compatible = "marvell,armada-380-corediv-clock"; reg = <0xe4250 0xc>; @@ -347,6 +400,12 @@ clock-output-names = "nand"; }; + thermal@e8078 { + compatible = "marvell,armada380-thermal"; + reg = <0xe4078 0x4>, <0xe4074 0x4>; + status = "okay"; + }; + flash@d0000 { compatible = "marvell,armada370-nand"; reg = <0xd0000 0x54>; @@ -356,6 +415,31 @@ clocks = <&coredivclk 0>; status = "disabled"; }; + + sdhci@d8000 { + compatible = "marvell,armada-380-sdhci"; + reg = <0xd8000 0x1000>, <0xdc000 0x100>; + interrupts = <0 25 0x4>; + clocks = <&gateclk 17>; + mrvl,clk-delay-cycles = <0x1F>; + status = "disabled"; + }; + + usb3@f0000 { + compatible = "marvell,armada-380-xhci"; + reg = <0xf0000 0x4000>,<0xf4000 0x4000>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gateclk 9>; + status = "disabled"; + }; + + usb3@f8000 { + compatible = "marvell,armada-380-xhci"; + reg = <0xf8000 0x4000>,<0xfc000 0x4000>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gateclk 10>; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/armada-xp-axpwifiap.dts b/arch/arm/boot/dts/armada-xp-axpwifiap.dts index d83d7d69ac01..a55a97a70505 100644 --- a/arch/arm/boot/dts/armada-xp-axpwifiap.dts +++ b/arch/arm/boot/dts/armada-xp-axpwifiap.dts @@ -95,12 +95,10 @@ }; serial@12000 { - clock-frequency = <250000000>; status = "okay"; }; serial@12100 { - clock-frequency = <250000000>; status = "okay"; }; diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts index 90f0bf6f9271..42ddb2864365 100644 --- a/arch/arm/boot/dts/armada-xp-db.dts +++ b/arch/arm/boot/dts/armada-xp-db.dts @@ -106,19 +106,15 @@ internal-regs { serial@12000 { - clock-frequency = <250000000>; status = "okay"; }; serial@12100 { - clock-frequency = <250000000>; status = "okay"; }; serial@12200 { - clock-frequency = <250000000>; status = "okay"; }; serial@12300 { - clock-frequency = <250000000>; status = "okay"; }; diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts index 0c756421ae6a..0478c55ca656 100644 --- a/arch/arm/boot/dts/armada-xp-gp.dts +++ b/arch/arm/boot/dts/armada-xp-gp.dts @@ -104,19 +104,15 @@ internal-regs { serial@12000 { - clock-frequency = <250000000>; status = "okay"; }; serial@12100 { - clock-frequency = <250000000>; status = "okay"; }; serial@12200 { - clock-frequency = <250000000>; status = "okay"; }; serial@12300 { - clock-frequency = <250000000>; status = "okay"; }; diff --git a/arch/arm/boot/dts/armada-xp-matrix.dts b/arch/arm/boot/dts/armada-xp-matrix.dts index c2242745b9b8..25674fe81f70 100644 --- a/arch/arm/boot/dts/armada-xp-matrix.dts +++ b/arch/arm/boot/dts/armada-xp-matrix.dts @@ -37,19 +37,15 @@ internal-regs { serial@12000 { - clock-frequency = <250000000>; status = "okay"; }; serial@12100 { - clock-frequency = <250000000>; status = "okay"; }; serial@12200 { - clock-frequency = <250000000>; status = "okay"; }; serial@12300 { - clock-frequency = <250000000>; status = "okay"; }; diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi index 98335fb34b7a..1257ff1ed278 100644 --- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi @@ -27,6 +27,7 @@ cpus { #address-cells = <1>; #size-cells = <0>; + enable-method = "marvell,armada-xp-smp"; cpu@0 { device_type = "cpu"; diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi index 9480cf891f8c..3396b25b39e1 100644 --- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi @@ -29,6 +29,7 @@ cpus { #address-cells = <1>; #size-cells = <0>; + enable-method = "marvell,armada-xp-smp"; cpu@0 { device_type = "cpu"; diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi index 31ba6d8fbadf..6da84bf40aaf 100644 --- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi @@ -30,6 +30,7 @@ cpus { #address-cells = <1>; #size-cells = <0>; + enable-method = "marvell,armada-xp-smp"; cpu@0 { device_type = "cpu"; diff --git a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts index ff049ee862eb..0cf999abc4ed 100644 --- a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts +++ b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts @@ -138,7 +138,6 @@ }; serial@12000 { - clocks = <&coreclk 0>; status = "okay"; }; diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts index 5d42feb31049..e5c6a0492ca0 100644 --- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts +++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts @@ -72,11 +72,9 @@ internal-regs { serial@12000 { - clock-frequency = <250000000>; status = "okay"; }; serial@12100 { - clock-frequency = <250000000>; status = "okay"; }; pinctrl { diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi index abb9f9dcc525..5902e8359c91 100644 --- a/arch/arm/boot/dts/armada-xp.dtsi +++ b/arch/arm/boot/dts/armada-xp.dtsi @@ -58,6 +58,7 @@ reg-shift = <2>; interrupts = <43>; reg-io-width = <1>; + clocks = <&coreclk 0>; status = "disabled"; }; serial@12300 { @@ -66,6 +67,7 @@ reg-shift = <2>; interrupts = <44>; reg-io-width = <1>; + clocks = <&coreclk 0>; status = "disabled"; }; @@ -117,9 +119,9 @@ clock-names = "nbclk", "fixed"; }; - armada-370-xp-pmsu@22000 { - compatible = "marvell,armada-370-xp-pmsu"; - reg = <0x22100 0x400>, <0x20800 0x20>; + cpurst@20800 { + compatible = "marvell,armada-370-cpu-reset"; + reg = <0x20800 0x20>; }; eth2: ethernet@30000 { diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts index 099111bd4221..5b8e40400bec 100644 --- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts @@ -51,11 +51,54 @@ }; i2c0: i2c@f0014000 { + pinctrl-0 = <&pinctrl_i2c0_pu>; status = "okay"; }; i2c1: i2c@f0018000 { status = "okay"; + + pmic: act8865@5b { + compatible = "active-semi,act8865"; + reg = <0x5b>; + status = "okay"; + + regulators { + vcc_1v8_reg: DCDC_REG1 { + regulator-name = "VCC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vcc_1v2_reg: DCDC_REG2 { + regulator-name = "VCC_1V2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + vcc_3v3_reg: DCDC_REG3 { + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vddfuse_reg: LDO_REG1 { + regulator-name = "FUSE_2V5"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + }; + + vddana_reg: LDO_REG2 { + regulator-name = "VDDANA"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; }; macb0: ethernet@f0028000 { @@ -63,6 +106,12 @@ status = "okay"; }; + pwm0: pwm@f002c000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_pwmh0_0 &pinctrl_pwm0_pwmh1_0>; + status = "okay"; + }; + usart0: serial@f001c000 { status = "okay"; }; @@ -110,6 +159,7 @@ i2c2: i2c@f801c000 { dmas = <0>, <0>; /* Do not use DMA for i2c2 */ + pinctrl-0 = <&pinctrl_i2c2_pu>; status = "okay"; }; @@ -124,6 +174,18 @@ pinctrl@fffff200 { board { + pinctrl_i2c0_pu: i2c0_pu { + atmel,pins = + <AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>, + <AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; + }; + + pinctrl_i2c2_pu: i2c2_pu { + atmel,pins = + <AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>, + <AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; + }; + pinctrl_mmc0_cd: mmc0_cd { atmel,pins = <AT91_PIOE 0 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi index 80cdcecf0332..b309c1c6e848 100644 --- a/arch/arm/boot/dts/at91sam9261.dtsi +++ b/arch/arm/boot/dts/at91sam9261.dtsi @@ -29,6 +29,7 @@ i2c0 = &i2c0; ssc0 = &ssc0; ssc1 = &ssc1; + ssc2 = &ssc2; }; cpus { @@ -194,6 +195,8 @@ interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; + clocks = <&ssc0_clk>; + clock-names = "pclk"; status = "disabled"; }; @@ -203,6 +206,19 @@ interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>; + clocks = <&ssc1_clk>; + clock-names = "pclk"; + status = "disabled"; + }; + + ssc2: ssc@fffc4000 { + compatible = "atmel,at91rm9200-ssc"; + reg = <0xfffc4000 0x4000>; + interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ssc2_tx &pinctrl_ssc2_rx>; + clocks = <&ssc2_clk>; + clock-names = "pclk"; status = "disabled"; }; @@ -397,6 +413,22 @@ }; }; + ssc2 { + pinctrl_ssc2_tx: ssc2_tx-0 { + atmel,pins = + <AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE>, + <AT91_PIOC 26 AT91_PERIPH_B AT91_PINCTRL_NONE>, + <AT91_PIOC 27 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_ssc2_rx: ssc2_rx-0 { + atmel,pins = + <AT91_PIOC 28 AT91_PERIPH_B AT91_PINCTRL_NONE>, + <AT91_PIOC 29 AT91_PERIPH_B AT91_PINCTRL_NONE>, + <AT91_PIOC 30 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + }; + spi0 { pinctrl_spi0: spi0-0 { atmel,pins = @@ -564,7 +596,8 @@ reg = <0>; atmel,clk-input-range = <1000000 32000000>; #atmel,pll-clk-output-range-cells = <4>; - atmel,pll-clk-output-ranges = <80000000 200000000 190000000 240000000>; + atmel,pll-clk-output-ranges = <80000000 200000000 0 1>, + <190000000 240000000 2 1>; }; pllb: pllbck { @@ -573,9 +606,9 @@ interrupts-extended = <&pmc AT91_PMC_LOCKB>; clocks = <&main>; reg = <1>; - atmel,clk-input-range = <1000000 32000000>; + atmel,clk-input-range = <1000000 5000000>; #atmel,pll-clk-output-range-cells = <4>; - atmel,pll-clk-output-ranges = <80000000 200000000 190000000 240000000>; + atmel,pll-clk-output-ranges = <70000000 130000000 1 1>; }; mck: masterck { @@ -584,16 +617,48 @@ interrupts-extended = <&pmc AT91_PMC_MCKRDY>; clocks = <&clk32k>, <&main>, <&plla>, <&pllb>; atmel,clk-output-range = <0 94000000>; - atmel,clk-divisors = <1 2 4 3>; + atmel,clk-divisors = <1 2 4 0>; }; usb: usbck { compatible = "atmel,at91rm9200-clk-usb"; #clock-cells = <0>; - atmel,clk-divisors = <1 2 4 3>; + atmel,clk-divisors = <1 2 4 0>; clocks = <&pllb>; }; + prog: progck { + compatible = "atmel,at91rm9200-clk-programmable"; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&pmc>; + clocks = <&clk32k>, <&main>, <&plla>, <&pllb>; + + prog0: prog0 { + #clock-cells = <0>; + reg = <0>; + interrupts = <AT91_PMC_PCKRDY(0)>; + }; + + prog1: prog1 { + #clock-cells = <0>; + reg = <1>; + interrupts = <AT91_PMC_PCKRDY(1)>; + }; + + prog2: prog2 { + #clock-cells = <0>; + reg = <2>; + interrupts = <AT91_PMC_PCKRDY(2)>; + }; + + prog3: prog3 { + #clock-cells = <0>; + reg = <3>; + interrupts = <AT91_PMC_PCKRDY(3)>; + }; + }; + systemck { compatible = "atmel,at91rm9200-clk-system"; #address-cells = <1>; @@ -611,6 +676,30 @@ clocks = <&usb>; }; + pck0: pck0 { + #clock-cells = <0>; + reg = <8>; + clocks = <&prog0>; + }; + + pck1: pck1 { + #clock-cells = <0>; + reg = <9>; + clocks = <&prog1>; + }; + + pck2: pck2 { + #clock-cells = <0>; + reg = <10>; + clocks = <&prog2>; + }; + + pck3: pck3 { + #clock-cells = <0>; + reg = <11>; + clocks = <&prog3>; + }; + hclk0: hclk0 { #clock-cells = <0>; reg = <16>; @@ -685,6 +774,21 @@ reg = <13>; }; + ssc0_clk: ssc0_clk { + #clock-cells = <0>; + reg = <14>; + }; + + ssc1_clk: ssc1_clk { + #clock-cells = <0>; + reg = <15>; + }; + + ssc2_clk: ssc2_clk { + #clock-cells = <0>; + reg = <16>; + }; + tc0_clk: tc0_clk { #clock-cells = <0>; reg = <17>; diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index 9cdaecff13b3..ace6bf197b70 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -136,6 +136,36 @@ >; /* shared pinctrl settings */ + adc0 { + pinctrl_adc0_adtrg: adc0_adtrg { + atmel,pins = <AT91_PIOD 28 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + pinctrl_adc0_ad0: adc0_ad0 { + atmel,pins = <AT91_PIOD 20 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; + pinctrl_adc0_ad1: adc0_ad1 { + atmel,pins = <AT91_PIOD 21 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; + pinctrl_adc0_ad2: adc0_ad2 { + atmel,pins = <AT91_PIOD 22 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; + pinctrl_adc0_ad3: adc0_ad3 { + atmel,pins = <AT91_PIOD 23 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; + pinctrl_adc0_ad4: adc0_ad4 { + atmel,pins = <AT91_PIOD 24 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; + pinctrl_adc0_ad5: adc0_ad5 { + atmel,pins = <AT91_PIOD 25 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; + pinctrl_adc0_ad6: adc0_ad6 { + atmel,pins = <AT91_PIOD 26 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; + pinctrl_adc0_ad7: adc0_ad7 { + atmel,pins = <AT91_PIOD 27 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; + }; + dbgu { pinctrl_dbgu: dbgu-0 { atmel,pins = @@ -634,10 +664,9 @@ adc0: adc@fffb0000 { #address-cells = <1>; #size-cells = <0>; - compatible = "atmel,at91sam9260-adc"; + compatible = "atmel,at91sam9g45-adc"; reg = <0xfffb0000 0x100>; interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>; - atmel,adc-use-external-triggers; atmel,adc-channels-used = <0xff>; atmel,adc-vref = <3300>; atmel,adc-startup-time = <40>; diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts index 7ff665a8c708..9f5b0a674995 100644 --- a/arch/arm/boot/dts/at91sam9m10g45ek.dts +++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts @@ -8,6 +8,7 @@ */ /dts-v1/; #include "at91sam9g45.dtsi" +#include <dt-bindings/pwm/pwm.h> / { model = "Atmel AT91SAM9M10G45-EK"; @@ -130,6 +131,21 @@ status = "okay"; }; + adc0: adc@fffb0000 { + pinctrl-names = "default"; + pinctrl-0 = < + &pinctrl_adc0_ad0 + &pinctrl_adc0_ad1 + &pinctrl_adc0_ad2 + &pinctrl_adc0_ad3 + &pinctrl_adc0_ad4 + &pinctrl_adc0_ad5 + &pinctrl_adc0_ad6 + &pinctrl_adc0_ad7>; + atmel,adc-ts-wires = <4>; + status = "okay"; + }; + pwm0: pwm@fffb8000 { status = "okay"; @@ -216,14 +232,14 @@ d6 { label = "d6"; - pwms = <&pwm0 3 5000 0>; + pwms = <&pwm0 3 5000 PWM_POLARITY_INVERTED>; max-brightness = <255>; linux,default-trigger = "nand-disk"; }; d7 { label = "d7"; - pwms = <&pwm0 1 5000 0>; + pwms = <&pwm0 1 5000 PWM_POLARITY_INVERTED>; max-brightness = <255>; linux,default-trigger = "mmc0"; }; diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi index 9f04808fc697..d1b82e6635d5 100644 --- a/arch/arm/boot/dts/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/at91sam9n12.dtsi @@ -12,6 +12,7 @@ #include <dt-bindings/pinctrl/at91.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/clock/at91.h> / { model = "Atmel AT91SAM9N12 SoC"; @@ -49,6 +50,18 @@ reg = <0x20000000 0x10000000>; }; + slow_xtal: slow_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + main_xtal: main_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + ahb { compatible = "simple-bus"; #address-cells = <1>; @@ -75,8 +88,280 @@ }; pmc: pmc@fffffc00 { - compatible = "atmel,at91rm9200-pmc"; - reg = <0xfffffc00 0x100>; + compatible = "atmel,at91sam9n12-pmc"; + reg = <0xfffffc00 0x200>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + interrupt-controller; + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + + main_rc_osc: main_rc_osc { + compatible = "atmel,at91sam9x5-clk-main-rc-osc"; + #clock-cells = <0>; + interrupts-extended = <&pmc AT91_PMC_MOSCRCS>; + clock-frequency = <12000000>; + clock-accuracy = <50000000>; + }; + + main_osc: main_osc { + compatible = "atmel,at91rm9200-clk-main-osc"; + #clock-cells = <0>; + interrupts-extended = <&pmc AT91_PMC_MOSCS>; + clocks = <&main_xtal>; + }; + + main: mainck { + compatible = "atmel,at91sam9x5-clk-main"; + #clock-cells = <0>; + interrupts-extended = <&pmc AT91_PMC_MOSCSELS>; + clocks = <&main_rc_osc>, <&main_osc>; + }; + + plla: pllack { + compatible = "atmel,at91rm9200-clk-pll"; + #clock-cells = <0>; + interrupts-extended = <&pmc AT91_PMC_LOCKA>; + clocks = <&main>; + reg = <0>; + atmel,clk-input-range = <2000000 32000000>; + #atmel,pll-clk-output-range-cells = <4>; + atmel,pll-clk-output-ranges = <745000000 800000000 0 0>, + <695000000 750000000 1 0>, + <645000000 700000000 2 0>, + <595000000 650000000 3 0>, + <545000000 600000000 0 1>, + <495000000 555000000 1 1>, + <445000000 500000000 1 2>, + <400000000 450000000 1 3>; + }; + + plladiv: plladivck { + compatible = "atmel,at91sam9x5-clk-plldiv"; + #clock-cells = <0>; + clocks = <&plla>; + }; + + pllb: pllbck { + compatible = "atmel,at91rm9200-clk-pll"; + #clock-cells = <0>; + interrupts-extended = <&pmc AT91_PMC_LOCKB>; + clocks = <&main>; + reg = <1>; + atmel,clk-input-range = <2000000 32000000>; + #atmel,pll-clk-output-range-cells = <3>; + atmel,pll-clk-output-ranges = <30000000 100000000 0>; + }; + + mck: masterck { + compatible = "atmel,at91sam9x5-clk-master"; + #clock-cells = <0>; + interrupts-extended = <&pmc AT91_PMC_MCKRDY>; + clocks = <&clk32k>, <&main>, <&plladiv>, <&pllb>; + atmel,clk-output-range = <0 133333333>; + atmel,clk-divisors = <1 2 4 3>; + atmel,master-clk-have-div3-pres; + }; + + usb: usbck { + compatible = "atmel,at91sam9n12-clk-usb"; + #clock-cells = <0>; + clocks = <&pllb>; + }; + + prog: progck { + compatible = "atmel,at91sam9x5-clk-programmable"; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&pmc>; + clocks = <&clk32k>, <&main>, <&plladiv>, <&pllb>, <&mck>; + + prog0: prog0 { + #clock-cells = <0>; + reg = <0>; + interrupts = <AT91_PMC_PCKRDY(0)>; + }; + + prog1: prog1 { + #clock-cells = <0>; + reg = <1>; + interrupts = <AT91_PMC_PCKRDY(1)>; + }; + }; + + systemck { + compatible = "atmel,at91rm9200-clk-system"; + #address-cells = <1>; + #size-cells = <0>; + + ddrck: ddrck { + #clock-cells = <0>; + reg = <2>; + clocks = <&mck>; + }; + + lcdck: lcdck { + #clock-cells = <0>; + reg = <3>; + clocks = <&mck>; + }; + + uhpck: uhpck { + #clock-cells = <0>; + reg = <6>; + clocks = <&usb>; + }; + + udpck: udpck { + #clock-cells = <0>; + reg = <7>; + clocks = <&usb>; + }; + + pck0: pck0 { + #clock-cells = <0>; + reg = <8>; + clocks = <&prog0>; + }; + + pck1: pck1 { + #clock-cells = <0>; + reg = <9>; + clocks = <&prog1>; + }; + }; + + periphck { + compatible = "atmel,at91sam9x5-clk-peripheral"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&mck>; + + pioAB_clk: pioAB_clk { + #clock-cells = <0>; + reg = <2>; + }; + + pioCD_clk: pioCD_clk { + #clock-cells = <0>; + reg = <3>; + }; + + fuse_clk: fuse_clk { + #clock-cells = <0>; + reg = <4>; + }; + + usart0_clk: usart0_clk { + #clock-cells = <0>; + reg = <5>; + }; + + usart1_clk: usart1_clk { + #clock-cells = <0>; + reg = <6>; + }; + + usart2_clk: usart2_clk { + #clock-cells = <0>; + reg = <7>; + }; + + usart3_clk: usart3_clk { + #clock-cells = <0>; + reg = <8>; + }; + + twi0_clk: twi0_clk { + reg = <9>; + #clock-cells = <0>; + }; + + twi1_clk: twi1_clk { + #clock-cells = <0>; + reg = <10>; + }; + + mci0_clk: mci0_clk { + #clock-cells = <0>; + reg = <12>; + }; + + spi0_clk: spi0_clk { + #clock-cells = <0>; + reg = <13>; + }; + + spi1_clk: spi1_clk { + #clock-cells = <0>; + reg = <14>; + }; + + uart0_clk: uart0_clk { + #clock-cells = <0>; + reg = <15>; + }; + + uart1_clk: uart1_clk { + #clock-cells = <0>; + reg = <16>; + }; + + tcb_clk: tcb_clk { + #clock-cells = <0>; + reg = <17>; + }; + + pwm_clk: pwm_clk { + #clock-cells = <0>; + reg = <18>; + }; + + adc_clk: adc_clk { + #clock-cells = <0>; + reg = <19>; + }; + + dma0_clk: dma0_clk { + #clock-cells = <0>; + reg = <20>; + }; + + uhphs_clk: uhphs_clk { + #clock-cells = <0>; + reg = <22>; + }; + + udphs_clk: udphs_clk { + #clock-cells = <0>; + reg = <23>; + }; + + lcdc_clk: lcdc_clk { + #clock-cells = <0>; + reg = <25>; + }; + + sha_clk: sha_clk { + #clock-cells = <0>; + reg = <27>; + }; + + ssc0_clk: ssc0_clk { + #clock-cells = <0>; + reg = <28>; + }; + + aes_clk: aes_clk { + #clock-cells = <0>; + reg = <29>; + }; + + trng_clk: trng_clk { + #clock-cells = <0>; + reg = <30>; + }; + }; }; rstc@fffffe00 { @@ -88,6 +373,7 @@ compatible = "atmel,at91sam9260-pit"; reg = <0xfffffe30 0xf>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&mck>; }; shdwc@fffffe10 { @@ -95,12 +381,38 @@ reg = <0xfffffe10 0x10>; }; + sckc@fffffe50 { + compatible = "atmel,at91sam9x5-sckc"; + reg = <0xfffffe50 0x4>; + + slow_osc: slow_osc { + compatible = "atmel,at91sam9x5-clk-slow-osc"; + #clock-cells = <0>; + clocks = <&slow_xtal>; + }; + + slow_rc_osc: slow_rc_osc { + compatible = "atmel,at91sam9x5-clk-slow-rc-osc"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-accuracy = <50000000>; + }; + + clk32k: slck { + compatible = "atmel,at91sam9x5-clk-slow"; + #clock-cells = <0>; + clocks = <&slow_rc_osc>, <&slow_osc>; + }; + }; + mmc0: mmc@f0008000 { compatible = "atmel,hsmci"; reg = <0xf0008000 0x600>; interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>; dmas = <&dma 1 AT91_DMA_CFG_PER_ID(0)>; dma-names = "rxtx"; + clocks = <&mci0_clk>; + clock-names = "mci_clk"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -110,12 +422,16 @@ compatible = "atmel,at91sam9x5-tcb"; reg = <0xf8008000 0x100>; interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&tcb_clk>; + clock-names = "t0_clk"; }; tcb1: timer@f800c000 { compatible = "atmel,at91sam9x5-tcb"; reg = <0xf800c000 0x100>; interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&tcb_clk>; + clock-names = "t0_clk"; }; dma: dma-controller@ffffec00 { @@ -123,6 +439,8 @@ reg = <0xffffec00 0x200>; interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>; #dma-cells = <2>; + clocks = <&dma0_clk>; + clock-names = "dma_clk"; }; pinctrl@fffff400 { @@ -392,6 +710,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; + clocks = <&pioAB_clk>; }; pioB: gpio@fffff600 { @@ -402,6 +721,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; + clocks = <&pioAB_clk>; }; pioC: gpio@fffff800 { @@ -412,6 +732,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; + clocks = <&pioCD_clk>; }; pioD: gpio@fffffa00 { @@ -422,6 +743,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; + clocks = <&pioCD_clk>; }; }; @@ -431,6 +753,8 @@ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; + clocks = <&mck>; + clock-names = "usart"; status = "disabled"; }; @@ -443,6 +767,8 @@ dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; + clocks = <&ssc0_clk>; + clock-names = "pclk"; status = "disabled"; }; @@ -452,6 +778,8 @@ interrupts = <5 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart0>; + clocks = <&usart0_clk>; + clock-names = "usart"; status = "disabled"; }; @@ -461,6 +789,8 @@ interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart1>; + clocks = <&usart1_clk>; + clock-names = "usart"; status = "disabled"; }; @@ -470,6 +800,8 @@ interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart2>; + clocks = <&usart2_clk>; + clock-names = "usart"; status = "disabled"; }; @@ -479,6 +811,8 @@ interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart3>; + clocks = <&usart3_clk>; + clock-names = "usart"; status = "disabled"; }; @@ -493,6 +827,7 @@ #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c0>; + clocks = <&twi0_clk>; status = "disabled"; }; @@ -507,6 +842,7 @@ #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; + clocks = <&twi1_clk>; status = "disabled"; }; @@ -521,6 +857,8 @@ dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; + clocks = <&spi0_clk>; + clock-names = "spi_clk"; status = "disabled"; }; @@ -535,6 +873,8 @@ dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; + clocks = <&spi1_clk>; + clock-names = "spi_clk"; status = "disabled"; }; @@ -554,6 +894,7 @@ reg = <0xf8034000 0x300>; interrupts = <18 IRQ_TYPE_LEVEL_HIGH 4>; #pwm-cells = <3>; + clocks = <&pwm_clk>; status = "disabled"; }; }; @@ -584,6 +925,9 @@ compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00500000 0x00100000>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; + clocks = <&usb>, <&uhphs_clk>, <&udphs_clk>, + <&uhpck>; + clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck"; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts index 924a6a6ffd0f..64bbe46e4f90 100644 --- a/arch/arm/boot/dts/at91sam9n12ek.dts +++ b/arch/arm/boot/dts/at91sam9n12ek.dts @@ -21,6 +21,14 @@ reg = <0x20000000 0x8000000>; }; + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <16000000>; + }; + clocks { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/at91sam9rl.dtsi index ae9c39a28c63..1da183155eee 100644 --- a/arch/arm/boot/dts/at91sam9rl.dtsi +++ b/arch/arm/boot/dts/at91sam9rl.dtsi @@ -11,6 +11,7 @@ #include <dt-bindings/clock/at91.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pwm/pwm.h> / { model = "Atmel AT91SAM9RL family SoC"; @@ -32,6 +33,7 @@ i2c1 = &i2c1; ssc0 = &ssc0; ssc1 = &ssc1; + pwm0 = &pwm0; }; cpus { @@ -60,12 +62,31 @@ clock-frequency = <0>; }; + clocks { + adc_op_clk: adc_op_clk{ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <1000000>; + }; + }; + ahb { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; + fb0: fb@00500000 { + compatible = "atmel,at91sam9rl-lcdc"; + reg = <0x00500000 0x1000>; + interrupts = <23 IRQ_TYPE_LEVEL_HIGH 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fb>; + clocks = <&lcd_clk>, <&lcd_clk>; + clock-names = "hclk", "lcdc_clk"; + status = "disabled"; + }; + nand0: nand@40000000 { compatible = "atmel,at91rm9200-nand"; #address-cells = <1>; @@ -199,6 +220,16 @@ status = "disabled"; }; + pwm0: pwm@fffc8000 { + compatible = "atmel,at91sam9rl-pwm"; + reg = <0xfffc8000 0x300>; + interrupts = <19 IRQ_TYPE_LEVEL_HIGH 4>; + #pwm-cells = <3>; + clocks = <&pwm_clk>; + clock-names = "pwm_clk"; + status = "disabled"; + }; + spi0: spi@fffcc000 { #address-cells = <1>; #size-cells = <0>; @@ -212,6 +243,111 @@ status = "disabled"; }; + adc0: adc@fffd0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "atmel,at91sam9rl-adc"; + reg = <0xfffd0000 0x100>; + interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&adc_clk>, <&adc_op_clk>; + clock-names = "adc_clk", "adc_op_clk"; + atmel,adc-use-external-triggers; + atmel,adc-channels-used = <0x3f>; + atmel,adc-vref = <3300>; + atmel,adc-startup-time = <40>; + atmel,adc-res = <8 10>; + atmel,adc-res-names = "lowres", "highres"; + atmel,adc-use-res = "highres"; + + trigger@0 { + reg = <0>; + trigger-name = "timer-counter-0"; + trigger-value = <0x1>; + }; + trigger@1 { + reg = <1>; + trigger-name = "timer-counter-1"; + trigger-value = <0x3>; + }; + + trigger@2 { + reg = <2>; + trigger-name = "timer-counter-2"; + trigger-value = <0x5>; + }; + + trigger@3 { + reg = <3>; + trigger-name = "external"; + trigger-value = <0x13>; + trigger-external; + }; + }; + + usb0: gadget@fffd4000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "atmel,at91sam9rl-udc"; + reg = <0x00600000 0x100000>, + <0xfffd4000 0x4000>; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; + clocks = <&udphs_clk>, <&utmi>; + clock-names = "pclk", "hclk"; + status = "disabled"; + + ep0 { + reg = <0>; + atmel,fifo-size = <64>; + atmel,nb-banks = <1>; + }; + + ep1 { + reg = <1>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + atmel,can-dma; + atmel,can-isoc; + }; + + ep2 { + reg = <2>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + atmel,can-dma; + atmel,can-isoc; + }; + + ep3 { + reg = <3>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <3>; + atmel,can-dma; + }; + + ep4 { + reg = <4>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <3>; + atmel,can-dma; + }; + + ep5 { + reg = <5>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <3>; + atmel,can-dma; + atmel,can-isoc; + }; + + ep6 { + reg = <6>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <3>; + atmel,can-dma; + atmel,can-isoc; + }; + }; + ramc0: ramc@ffffea00 { compatible = "atmel,at91sam9260-sdramc"; reg = <0xffffea00 0x200>; @@ -250,6 +386,44 @@ <0x003fffff 0x0001ff3c>; /* pioD */ /* shared pinctrl settings */ + adc0 { + pinctrl_adc0_ts: adc0_ts-0 { + atmel,pins = + <AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_adc0_ad0: adc0_ad0-0 { + atmel,pins = <AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_adc0_ad1: adc0_ad1-0 { + atmel,pins = <AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_adc0_ad2: adc0_ad2-0 { + atmel,pins = <AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_adc0_ad3: adc0_ad3-0 { + atmel,pins = <AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_adc0_ad4: adc0_ad4-0 { + atmel,pins = <AT91_PIOD 6 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_adc0_ad5: adc0_ad5-0 { + atmel,pins = <AT91_PIOD 7 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_adc0_adtrg: adc0_adtrg-0 { + atmel,pins = <AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + }; + dbgu { pinctrl_dbgu: dbgu-0 { atmel,pins = @@ -258,6 +432,33 @@ }; }; + fb { + pinctrl_fb: fb-0 { + atmel,pins = + <AT91_PIOC 1 AT91_PERIPH_B AT91_PINCTRL_NONE>, + <AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOC 9 AT91_PERIPH_B AT91_PINCTRL_NONE>, + <AT91_PIOC 10 AT91_PERIPH_B AT91_PINCTRL_NONE>, + <AT91_PIOC 11 AT91_PERIPH_B AT91_PINCTRL_NONE>, + <AT91_PIOC 12 AT91_PERIPH_B AT91_PINCTRL_NONE>, + <AT91_PIOC 13 AT91_PERIPH_B AT91_PINCTRL_NONE>, + <AT91_PIOC 15 AT91_PERIPH_B AT91_PINCTRL_NONE>, + <AT91_PIOC 16 AT91_PERIPH_B AT91_PINCTRL_NONE>, + <AT91_PIOC 17 AT91_PERIPH_B AT91_PINCTRL_NONE>, + <AT91_PIOC 18 AT91_PERIPH_B AT91_PINCTRL_NONE>, + <AT91_PIOC 19 AT91_PERIPH_B AT91_PINCTRL_NONE>, + <AT91_PIOC 20 AT91_PERIPH_B AT91_PINCTRL_NONE>, + <AT91_PIOC 21 AT91_PERIPH_B AT91_PINCTRL_NONE>, + <AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_NONE>, + <AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_NONE>, + <AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE>, + <AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + }; + i2c_gpio0 { pinctrl_i2c_gpio0: i2c_gpio0-0 { atmel,pins = @@ -319,6 +520,61 @@ }; }; + pwm0 { + pinctrl_pwm0_pwm0_0: pwm0_pwm0-0 { + atmel,pins = <AT91_PIOB 8 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_pwm0_pwm0_1: pwm0_pwm0-1 { + atmel,pins = <AT91_PIOC 2 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_pwm0_pwm0_2: pwm0_pwm0-2 { + atmel,pins = <AT91_PIOD 14 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_pwm0_pwm1_0: pwm0_pwm1-0 { + atmel,pins = <AT91_PIOB 9 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_pwm0_pwm1_1: pwm0_pwm1-1 { + atmel,pins = <AT91_PIOC 3 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_pwm0_pwm1_2: pwm0_pwm1-2 { + atmel,pins = <AT91_PIOD 15 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_pwm0_pwm2_0: pwm0_pwm2-0 { + atmel,pins = <AT91_PIOD 5 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_pwm0_pwm2_1: pwm0_pwm2-1 { + atmel,pins = <AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_pwm0_pwm2_2: pwm0_pwm2-2 { + atmel,pins = <AT91_PIOD 16 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_pwm0_pwm3_0: pwm0_pwm3-0 { + atmel,pins = <AT91_PIOD 8 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_pwm0_pwm3_1: pwm0_pwm3-1 { + atmel,pins = <AT91_PIOD 18 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + }; + + spi0 { + pinctrl_spi0: spi0-0 { + atmel,pins = + <AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + }; + ssc0 { pinctrl_ssc0_tx: ssc0_tx-0 { atmel,pins = @@ -351,15 +607,6 @@ }; }; - spi0 { - pinctrl_spi0: spi0-0 { - atmel,pins = - <AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE>, - <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE>, - <AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>; - }; - }; - tcb0 { pinctrl_tcb0_tclk0: tcb0_tclk0-0 { atmel,pins = <AT91_PIOA 3 AT91_PERIPH_B AT91_PINCTRL_NONE>; @@ -574,8 +821,9 @@ clocks = <&main>; reg = <0>; atmel,clk-input-range = <1000000 32000000>; - #atmel,pll-clk-output-range-cells = <4>; - atmel,pll-clk-output-ranges = <80000000 200000000 190000000 240000000>; + #atmel,pll-clk-output-range-cells = <3>; + atmel,pll-clk-output-ranges = <80000000 200000000 0>, + <190000000 240000000 2>; }; utmi: utmick { @@ -592,7 +840,7 @@ interrupts-extended = <&pmc AT91_PMC_MCKRDY>; clocks = <&clk32k>, <&main>, <&plla>, <&utmi>; atmel,clk-output-range = <0 94000000>; - atmel,clk-divisors = <1 2 4 3>; + atmel,clk-divisors = <1 2 4 0>; }; prog: progck { diff --git a/arch/arm/boot/dts/at91sam9rlek.dts b/arch/arm/boot/dts/at91sam9rlek.dts index b3b89baf972e..d4a010e40fe3 100644 --- a/arch/arm/boot/dts/at91sam9rlek.dts +++ b/arch/arm/boot/dts/at91sam9rlek.dts @@ -41,6 +41,37 @@ }; ahb { + fb0: fb@00500000 { + display = <&display0>; + status = "okay"; + + display0: display { + bits-per-pixel = <16>; + atmel,lcdcon-backlight; + atmel,dmacon = <0x1>; + atmel,lcdcon2 = <0x80008002>; + atmel,guard-time = <1>; + atmel,lcd-wiring-mode = "RGB"; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <4965000>; + hactive = <240>; + vactive = <320>; + hback-porch = <1>; + hfront-porch = <33>; + vback-porch = <1>; + vfront-porch = <0>; + hsync-len = <5>; + vsync-len = <1>; + hsync-active = <1>; + vsync-active = <1>; + }; + }; + }; + }; + nand0: nand@40000000 { nand-bus-width = <8>; nand-ecc-mode = "soft"; @@ -101,6 +132,43 @@ status = "okay"; }; + adc0: adc@fffd0000 { + pinctrl-names = "default"; + pinctrl-0 = < + &pinctrl_adc0_ad0 + &pinctrl_adc0_ad1 + &pinctrl_adc0_ad2 + &pinctrl_adc0_ad3 + &pinctrl_adc0_ad4 + &pinctrl_adc0_ad5 + &pinctrl_adc0_adtrg>; + atmel,adc-ts-wires = <4>; + status = "okay"; + }; + + usb0: gadget@fffd4000 { + atmel,vbus-gpio = <&pioA 8 GPIO_ACTIVE_HIGH>; + status = "okay"; + }; + + spi0: spi@fffcc000 { + status = "okay"; + cs-gpios = <&pioA 28 0>, <0>, <0>, <0>; + mtd_dataflash@0 { + compatible = "atmel,at45", "atmel,dataflash"; + spi-max-frequency = <15000000>; + reg = <0>; + }; + }; + + pwm0: pwm@fffc8000 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_pwm1_2>, + <&pinctrl_pwm0_pwm2_2>; + }; + dbgu: serial@fffff200 { status = "okay"; }; @@ -126,18 +194,24 @@ }; }; - leds { - compatible = "gpio-leds"; + pwmleds { + compatible = "pwm-leds"; ds1 { label = "ds1"; - gpios = <&pioD 15 GPIO_ACTIVE_LOW>; + pwms = <&pwm0 1 5000 PWM_POLARITY_INVERTED>; + max-brightness = <255>; }; ds2 { label = "ds2"; - gpios = <&pioD 16 GPIO_ACTIVE_LOW>; + pwms = <&pwm0 2 5000 PWM_POLARITY_INVERTED>; + max-brightness = <255>; }; + }; + + leds { + compatible = "gpio-leds"; ds3 { label = "ds3"; @@ -163,4 +237,12 @@ gpio-key,wakeup; }; }; + + i2c@0 { + status = "okay"; + }; + + i2c@1 { + status = "okay"; + }; }; diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index fc13c9240da8..1a57298636a5 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -14,6 +14,7 @@ #include <dt-bindings/pinctrl/at91.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/clock/at91.h> / { model = "Atmel AT91SAM9x5 family SoC"; @@ -51,6 +52,24 @@ reg = <0x20000000 0x10000000>; }; + slow_xtal: slow_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + main_xtal: main_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + adc_op_clk: adc_op_clk{ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <5000000>; + }; + ahb { compatible = "simple-bus"; #address-cells = <1>; @@ -77,8 +96,272 @@ }; pmc: pmc@fffffc00 { - compatible = "atmel,at91rm9200-pmc"; + compatible = "atmel,at91sam9x5-pmc"; reg = <0xfffffc00 0x100>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + interrupt-controller; + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + + main_rc_osc: main_rc_osc { + compatible = "atmel,at91sam9x5-clk-main-rc-osc"; + #clock-cells = <0>; + interrupts-extended = <&pmc AT91_PMC_MOSCRCS>; + clock-frequency = <12000000>; + clock-accuracy = <50000000>; + }; + + main_osc: main_osc { + compatible = "atmel,at91rm9200-clk-main-osc"; + #clock-cells = <0>; + interrupts-extended = <&pmc AT91_PMC_MOSCS>; + clocks = <&main_xtal>; + }; + + main: mainck { + compatible = "atmel,at91sam9x5-clk-main"; + #clock-cells = <0>; + interrupts-extended = <&pmc AT91_PMC_MOSCSELS>; + clocks = <&main_rc_osc>, <&main_osc>; + }; + + plla: pllack { + compatible = "atmel,at91rm9200-clk-pll"; + #clock-cells = <0>; + interrupts-extended = <&pmc AT91_PMC_LOCKA>; + clocks = <&main>; + reg = <0>; + atmel,clk-input-range = <2000000 32000000>; + #atmel,pll-clk-output-range-cells = <4>; + atmel,pll-clk-output-ranges = <745000000 800000000 0 0 + 695000000 750000000 1 0 + 645000000 700000000 2 0 + 595000000 650000000 3 0 + 545000000 600000000 0 1 + 495000000 555000000 1 1 + 445000000 500000000 1 2 + 400000000 450000000 1 3>; + }; + + plladiv: plladivck { + compatible = "atmel,at91sam9x5-clk-plldiv"; + #clock-cells = <0>; + clocks = <&plla>; + }; + + utmi: utmick { + compatible = "atmel,at91sam9x5-clk-utmi"; + #clock-cells = <0>; + interrupts-extended = <&pmc AT91_PMC_LOCKU>; + clocks = <&main>; + }; + + mck: masterck { + compatible = "atmel,at91sam9x5-clk-master"; + #clock-cells = <0>; + interrupts-extended = <&pmc AT91_PMC_MCKRDY>; + clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>; + atmel,clk-output-range = <0 133333333>; + atmel,clk-divisors = <1 2 4 3>; + atmel,master-clk-have-div3-pres; + }; + + usb: usbck { + compatible = "atmel,at91sam9x5-clk-usb"; + #clock-cells = <0>; + clocks = <&plladiv>, <&utmi>; + }; + + prog: progck { + compatible = "atmel,at91sam9x5-clk-programmable"; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&pmc>; + clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>; + + prog0: prog0 { + #clock-cells = <0>; + reg = <0>; + interrupts = <AT91_PMC_PCKRDY(0)>; + }; + + prog1: prog1 { + #clock-cells = <0>; + reg = <1>; + interrupts = <AT91_PMC_PCKRDY(1)>; + }; + }; + + smd: smdclk { + compatible = "atmel,at91sam9x5-clk-smd"; + #clock-cells = <0>; + clocks = <&plladiv>, <&utmi>; + }; + + systemck { + compatible = "atmel,at91rm9200-clk-system"; + #address-cells = <1>; + #size-cells = <0>; + + ddrck: ddrck { + #clock-cells = <0>; + reg = <2>; + clocks = <&mck>; + }; + + smdck: smdck { + #clock-cells = <0>; + reg = <4>; + clocks = <&smd>; + }; + + uhpck: uhpck { + #clock-cells = <0>; + reg = <6>; + clocks = <&usb>; + }; + + udpck: udpck { + #clock-cells = <0>; + reg = <7>; + clocks = <&usb>; + }; + + pck0: pck0 { + #clock-cells = <0>; + reg = <8>; + clocks = <&prog0>; + }; + + pck1: pck1 { + #clock-cells = <0>; + reg = <9>; + clocks = <&prog1>; + }; + }; + + periphck { + compatible = "atmel,at91sam9x5-clk-peripheral"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&mck>; + + pioAB_clk: pioAB_clk { + #clock-cells = <0>; + reg = <2>; + }; + + pioCD_clk: pioCD_clk { + #clock-cells = <0>; + reg = <3>; + }; + + smd_clk: smd_clk { + #clock-cells = <0>; + reg = <4>; + }; + + usart0_clk: usart0_clk { + #clock-cells = <0>; + reg = <5>; + }; + + usart1_clk: usart1_clk { + #clock-cells = <0>; + reg = <6>; + }; + + usart2_clk: usart2_clk { + #clock-cells = <0>; + reg = <7>; + }; + + twi0_clk: twi0_clk { + reg = <9>; + #clock-cells = <0>; + }; + + twi1_clk: twi1_clk { + #clock-cells = <0>; + reg = <10>; + }; + + twi2_clk: twi2_clk { + #clock-cells = <0>; + reg = <11>; + }; + + mci0_clk: mci0_clk { + #clock-cells = <0>; + reg = <12>; + }; + + spi0_clk: spi0_clk { + #clock-cells = <0>; + reg = <13>; + }; + + spi1_clk: spi1_clk { + #clock-cells = <0>; + reg = <14>; + }; + + uart0_clk: uart0_clk { + #clock-cells = <0>; + reg = <15>; + }; + + uart1_clk: uart1_clk { + #clock-cells = <0>; + reg = <16>; + }; + + tcb0_clk: tcb0_clk { + #clock-cells = <0>; + reg = <17>; + }; + + pwm_clk: pwm_clk { + #clock-cells = <0>; + reg = <18>; + }; + + adc_clk: adc_clk { + #clock-cells = <0>; + reg = <19>; + }; + + dma0_clk: dma0_clk { + #clock-cells = <0>; + reg = <20>; + }; + + dma1_clk: dma1_clk { + #clock-cells = <0>; + reg = <21>; + }; + + uhphs_clk: uhphs_clk { + #clock-cells = <0>; + reg = <22>; + }; + + udphs_clk: udphs_clk { + #clock-cells = <0>; + reg = <23>; + }; + + mci1_clk: mci1_clk { + #clock-cells = <0>; + reg = <26>; + }; + + ssc0_clk: ssc0_clk { + #clock-cells = <0>; + reg = <28>; + }; + }; }; rstc@fffffe00 { @@ -95,18 +378,47 @@ compatible = "atmel,at91sam9260-pit"; reg = <0xfffffe30 0xf>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&mck>; + }; + + sckc@fffffe50 { + compatible = "atmel,at91sam9x5-sckc"; + reg = <0xfffffe50 0x4>; + + slow_osc: slow_osc { + compatible = "atmel,at91sam9x5-clk-slow-osc"; + #clock-cells = <0>; + clocks = <&slow_xtal>; + }; + + slow_rc_osc: slow_rc_osc { + compatible = "atmel,at91sam9x5-clk-slow-rc-osc"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-accuracy = <50000000>; + }; + + clk32k: slck { + compatible = "atmel,at91sam9x5-clk-slow"; + #clock-cells = <0>; + clocks = <&slow_rc_osc>, <&slow_osc>; + }; }; tcb0: timer@f8008000 { compatible = "atmel,at91sam9x5-tcb"; reg = <0xf8008000 0x100>; interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&tcb0_clk>; + clock-names = "t0_clk"; }; tcb1: timer@f800c000 { compatible = "atmel,at91sam9x5-tcb"; reg = <0xf800c000 0x100>; interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&tcb0_clk>; + clock-names = "t0_clk"; }; dma0: dma-controller@ffffec00 { @@ -114,6 +426,8 @@ reg = <0xffffec00 0x200>; interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>; #dma-cells = <2>; + clocks = <&dma0_clk>; + clock-names = "dma_clk"; }; dma1: dma-controller@ffffee00 { @@ -121,6 +435,8 @@ reg = <0xffffee00 0x200>; interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>; #dma-cells = <2>; + clocks = <&dma1_clk>; + clock-names = "dma_clk"; }; pinctrl@fffff400 { @@ -453,6 +769,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; + clocks = <&pioAB_clk>; }; pioB: gpio@fffff600 { @@ -464,6 +781,7 @@ #gpio-lines = <19>; interrupt-controller; #interrupt-cells = <2>; + clocks = <&pioAB_clk>; }; pioC: gpio@fffff800 { @@ -474,6 +792,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; + clocks = <&pioCD_clk>; }; pioD: gpio@fffffa00 { @@ -485,6 +804,7 @@ #gpio-lines = <22>; interrupt-controller; #interrupt-cells = <2>; + clocks = <&pioCD_clk>; }; }; @@ -497,6 +817,8 @@ dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; + clocks = <&ssc0_clk>; + clock-names = "pclk"; status = "disabled"; }; @@ -507,6 +829,8 @@ dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(0)>; dma-names = "rxtx"; pinctrl-names = "default"; + clocks = <&mci0_clk>; + clock-names = "mci_clk"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -519,6 +843,8 @@ dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(0)>; dma-names = "rxtx"; pinctrl-names = "default"; + clocks = <&mci1_clk>; + clock-names = "mci_clk"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -530,6 +856,8 @@ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; + clocks = <&mck>; + clock-names = "usart"; status = "disabled"; }; @@ -539,6 +867,8 @@ interrupts = <5 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart0>; + clocks = <&usart0_clk>; + clock-names = "usart"; status = "disabled"; }; @@ -548,6 +878,8 @@ interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart1>; + clocks = <&usart1_clk>; + clock-names = "usart"; status = "disabled"; }; @@ -557,6 +889,8 @@ interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart2>; + clocks = <&usart2_clk>; + clock-names = "usart"; status = "disabled"; }; @@ -571,6 +905,7 @@ #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c0>; + clocks = <&twi0_clk>; status = "disabled"; }; @@ -585,6 +920,7 @@ #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; + clocks = <&twi1_clk>; status = "disabled"; }; @@ -599,6 +935,7 @@ #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; + clocks = <&twi2_clk>; status = "disabled"; }; @@ -608,6 +945,8 @@ interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart0>; + clocks = <&uart0_clk>; + clock-names = "usart"; status = "disabled"; }; @@ -617,6 +956,8 @@ interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; + clocks = <&uart1_clk>; + clock-names = "usart"; status = "disabled"; }; @@ -626,6 +967,9 @@ compatible = "atmel,at91sam9260-adc"; reg = <0xf804c000 0x100>; interrupts = <19 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&adc_clk>, + <&adc_op_clk>; + clock-names = "adc_clk", "adc_op_clk"; atmel,adc-use-external-triggers; atmel,adc-channels-used = <0xffff>; atmel,adc-vref = <3300>; @@ -673,6 +1017,8 @@ dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; + clocks = <&spi0_clk>; + clock-names = "spi_clk"; status = "disabled"; }; @@ -687,6 +1033,8 @@ dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; + clocks = <&spi1_clk>; + clock-names = "spi_clk"; status = "disabled"; }; @@ -805,6 +1153,9 @@ compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00600000 0x100000>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; + clocks = <&usb>, <&uhphs_clk>, <&udphs_clk>, + <&uhpck>; + clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck"; status = "disabled"; }; @@ -812,6 +1163,8 @@ compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00700000 0x100000>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; + clocks = <&usb>, <&uhphs_clk>, <&uhpck>; + clock-names = "usb_clk", "ehci_clk", "uhpck"; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/at91sam9x5_can.dtsi b/arch/arm/boot/dts/at91sam9x5_can.dtsi new file mode 100644 index 000000000000..f44ab7702a12 --- /dev/null +++ b/arch/arm/boot/dts/at91sam9x5_can.dtsi @@ -0,0 +1,31 @@ +/* + * at91sam9x5_macb0.dtsi - Device Tree Include file for AT91SAM9x5 SoC with 1 + * Ethernet interface. + * + * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com> + * + * Licensed under GPLv2. + */ + +#include <dt-bindings/pinctrl/at91.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + ahb { + apb { + pmc: pmc@fffffc00 { + periphck { + can0_clk: can0_clk { + #clock-cells = <0>; + reg = <29>; + }; + + can1_clk: can1_clk { + #clock-cells = <0>; + reg = <30>; + }; + }; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91sam9x5_isi.dtsi b/arch/arm/boot/dts/at91sam9x5_isi.dtsi new file mode 100644 index 000000000000..98bc877a68ef --- /dev/null +++ b/arch/arm/boot/dts/at91sam9x5_isi.dtsi @@ -0,0 +1,26 @@ +/* + * at91sam9x5_isi.dtsi - Device Tree Include file for AT91SAM9x5 SoC with an + * Image Sensor Interface. + * + * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com> + * + * Licensed under GPLv2. + */ + +#include <dt-bindings/pinctrl/at91.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + ahb { + apb { + pmc: pmc@fffffc00 { + periphck { + isi_clk: isi_clk { + #clock-cells = <0>; + reg = <25>; + }; + }; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91sam9x5_lcd.dtsi b/arch/arm/boot/dts/at91sam9x5_lcd.dtsi new file mode 100644 index 000000000000..485302e8233d --- /dev/null +++ b/arch/arm/boot/dts/at91sam9x5_lcd.dtsi @@ -0,0 +1,26 @@ +/* + * at91sam9x5_lcd.dtsi - Device Tree Include file for AT91SAM9x5 SoC with an + * LCD controller. + * + * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com> + * + * Licensed under GPLv2. + */ + +#include <dt-bindings/pinctrl/at91.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + ahb { + apb { + pmc: pmc@fffffc00 { + periphck { + lcdc_clk: lcdc_clk { + #clock-cells = <0>; + reg = <25>; + }; + }; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91sam9x5_macb0.dtsi b/arch/arm/boot/dts/at91sam9x5_macb0.dtsi index 55731ffba764..57e89d1d0325 100644 --- a/arch/arm/boot/dts/at91sam9x5_macb0.dtsi +++ b/arch/arm/boot/dts/at91sam9x5_macb0.dtsi @@ -43,12 +43,23 @@ }; }; + pmc: pmc@fffffc00 { + periphck { + macb0_clk: macb0_clk { + #clock-cells = <0>; + reg = <24>; + }; + }; + }; + macb0: ethernet@f802c000 { compatible = "cdns,at32ap7000-macb", "cdns,macb"; reg = <0xf802c000 0x100>; interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_macb0_rmii>; + clocks = <&macb0_clk>, <&macb0_clk>; + clock-names = "hclk", "pclk"; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/at91sam9x5_macb1.dtsi b/arch/arm/boot/dts/at91sam9x5_macb1.dtsi index 77425a627a94..663676c02861 100644 --- a/arch/arm/boot/dts/at91sam9x5_macb1.dtsi +++ b/arch/arm/boot/dts/at91sam9x5_macb1.dtsi @@ -31,12 +31,23 @@ }; }; + pmc: pmc@fffffc00 { + periphck { + macb1_clk: macb1_clk { + #clock-cells = <0>; + reg = <27>; + }; + }; + }; + macb1: ethernet@f8030000 { compatible = "cdns,at32ap7000-macb", "cdns,macb"; reg = <0xf8030000 0x100>; interrupts = <27 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_macb1_rmii>; + clocks = <&macb1_clk>, <&macb1_clk>; + clock-names = "hclk", "pclk"; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/at91sam9x5_usart3.dtsi b/arch/arm/boot/dts/at91sam9x5_usart3.dtsi index 6801106fa1f8..140217a54384 100644 --- a/arch/arm/boot/dts/at91sam9x5_usart3.dtsi +++ b/arch/arm/boot/dts/at91sam9x5_usart3.dtsi @@ -42,12 +42,23 @@ }; }; + pmc: pmc@fffffc00 { + periphck { + usart3_clk: usart3_clk { + #clock-cells = <0>; + reg = <8>; + }; + }; + }; + usart3: serial@f8028000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8028000 0x200>; interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart3>; + clocks = <&usart3_clk>; + clock-names = "usart"; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/at91sam9x5cm.dtsi b/arch/arm/boot/dts/at91sam9x5cm.dtsi index 4a5ee5cc115a..8413e21192eb 100644 --- a/arch/arm/boot/dts/at91sam9x5cm.dtsi +++ b/arch/arm/boot/dts/at91sam9x5cm.dtsi @@ -23,6 +23,14 @@ }; }; + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <12000000>; + }; + ahb { apb { pinctrl@fffff400 { diff --git a/arch/arm/boot/dts/atlas6.dtsi b/arch/arm/boot/dts/atlas6.dtsi index 317bc590a4d0..bb22842a0826 100644 --- a/arch/arm/boot/dts/atlas6.dtsi +++ b/arch/arm/boot/dts/atlas6.dtsi @@ -39,6 +39,11 @@ }; }; + arm-pmu { + compatible = "arm,cortex-a9-pmu"; + interrupts = <29>; + }; + axi { compatible = "simple-bus"; #address-cells = <1>; @@ -167,6 +172,7 @@ compatible = "sirf,prima2-dspif"; reg = <0xa8000000 0x10000>; interrupts = <9>; + resets = <&rstc 1>; }; gps@a8010000 { @@ -174,6 +180,7 @@ reg = <0xa8010000 0x10000>; interrupts = <7>; clocks = <&clks 9>; + resets = <&rstc 2>; }; dsp@a9000000 { @@ -181,6 +188,7 @@ reg = <0xa9000000 0x1000000>; interrupts = <8>; clocks = <&clks 8>; + resets = <&rstc 0>; }; }; @@ -298,9 +306,9 @@ reg = <0xb00d0000 0x10000>; interrupts = <15>; sirf,spi-num-chipselects = <1>; - cs-gpios = <&gpio 0 0>; - sirf,spi-dma-rx-channel = <25>; - sirf,spi-dma-tx-channel = <20>; + dmas = <&dmac1 9>, + <&dmac1 4>; + dma-names = "rx", "tx"; #address-cells = <1>; #size-cells = <0>; clocks = <&clks 19>; @@ -313,8 +321,9 @@ reg = <0xb0170000 0x10000>; interrupts = <16>; sirf,spi-num-chipselects = <1>; - sirf,spi-dma-rx-channel = <12>; - sirf,spi-dma-tx-channel = <13>; + dmas = <&dmac0 12>, + <&dmac0 13>; + dma-names = "rx", "tx"; #address-cells = <1>; #size-cells = <0>; clocks = <&clks 20>; @@ -555,6 +564,18 @@ sirf,function = "usp0_uart_nostreamctrl"; }; }; + usp0_only_utfs_pins_a: usp0@2 { + usp0 { + sirf,pins = "usp0_only_utfs_grp"; + sirf,function = "usp0_only_utfs"; + }; + }; + usp0_only_urfs_pins_a: usp0@3 { + usp0 { + sirf,pins = "usp0_only_urfs_grp"; + sirf,function = "usp0_only_urfs"; + }; + }; usp1_pins_a: usp1@0 { usp1 { sirf,pins = "usp1grp"; diff --git a/arch/arm/boot/dts/bcm11351.dtsi b/arch/arm/boot/dts/bcm11351.dtsi index 64d069bcc409..6b05ae6d476f 100644 --- a/arch/arm/boot/dts/bcm11351.dtsi +++ b/arch/arm/boot/dts/bcm11351.dtsi @@ -193,6 +193,14 @@ status = "disabled"; }; + pwm: pwm@3e01a000 { + compatible = "brcm,bcm11351-pwm", "brcm,kona-pwm"; + reg = <0x3e01a000 0xcc>; + clocks = <&slave_ccu BCM281XX_SLAVE_CCU_PWM>; + #pwm-cells = <3>; + status = "disabled"; + }; + clocks { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/bcm28155-ap.dts b/arch/arm/boot/dts/bcm28155-ap.dts index af3da55eef49..9ce91dd60cb6 100644 --- a/arch/arm/boot/dts/bcm28155-ap.dts +++ b/arch/arm/boot/dts/bcm28155-ap.dts @@ -69,6 +69,10 @@ status = "okay"; }; + pwm: pwm@3e01a000 { + status = "okay"; + }; + usbotg: usb@3f120000 { vusb_d-supply = <&usbldo_reg>; vusb_a-supply = <&iosr1_reg>; diff --git a/arch/arm/boot/dts/bcm59056.dtsi b/arch/arm/boot/dts/bcm59056.dtsi index dfadaaa89b05..066adfb10bd5 100644 --- a/arch/arm/boot/dts/bcm59056.dtsi +++ b/arch/arm/boot/dts/bcm59056.dtsi @@ -70,5 +70,26 @@ vsr_reg: vsr { }; + + gpldo1_reg: gpldo1 { + }; + + gpldo2_reg: gpldo2 { + }; + + gpldo3_reg: gpldo3 { + }; + + gpldo4_reg: gpldo4 { + }; + + gpldo5_reg: gpldo5 { + }; + + gpldo6_reg: gpldo6 { + }; + + vbus_reg: vbus { + }; }; }; diff --git a/arch/arm/boot/dts/berlin2.dtsi b/arch/arm/boot/dts/berlin2.dtsi index 56a1af2f1052..2477dac4d643 100644 --- a/arch/arm/boot/dts/berlin2.dtsi +++ b/arch/arm/boot/dts/berlin2.dtsi @@ -12,6 +12,7 @@ */ #include "skeleton.dtsi" +#include <dt-bindings/clock/berlin2.h> #include <dt-bindings/interrupt-controller/arm-gic.h> / { @@ -37,24 +38,10 @@ }; }; - clocks { - smclk: sysmgr-clock { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <25000000>; - }; - - cfgclk: cfg-clock { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <100000000>; - }; - - sysclk: system-clock { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <400000000>; - }; + refclk: oscillator { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; }; soc { @@ -72,6 +59,11 @@ cache-level = <2>; }; + scu: snoop-control-unit@ad0000 { + compatible = "arm,cortex-a9-scu"; + reg = <0xad0000 0x58>; + }; + gic: interrupt-controller@ad1000 { compatible = "arm,cortex-a9-gic"; reg = <0xad1000 0x1000>, <0xad0100 0x0100>; @@ -83,7 +75,7 @@ compatible = "arm,cortex-a9-twd-timer"; reg = <0xad0600 0x20>; interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&sysclk>; + clocks = <&chip CLKID_TWD>; }; apb@e80000 { @@ -94,11 +86,83 @@ ranges = <0 0xe80000 0x10000>; interrupt-parent = <&aic>; + gpio0: gpio@0400 { + compatible = "snps,dw-apb-gpio"; + reg = <0x0400 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + porta: gpio-port@0 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <8>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <0>; + }; + }; + + gpio1: gpio@0800 { + compatible = "snps,dw-apb-gpio"; + reg = <0x0800 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + portb: gpio-port@1 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <8>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <1>; + }; + }; + + gpio2: gpio@0c00 { + compatible = "snps,dw-apb-gpio"; + reg = <0x0c00 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + portc: gpio-port@2 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <8>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <2>; + }; + }; + + gpio3: gpio@1000 { + compatible = "snps,dw-apb-gpio"; + reg = <0x1000 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + portd: gpio-port@3 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <8>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <3>; + }; + }; + timer0: timer@2c00 { compatible = "snps,dw-apb-timer"; reg = <0x2c00 0x14>; interrupts = <8>; - clocks = <&cfgclk>; + clocks = <&chip CLKID_CFG>; clock-names = "timer"; status = "okay"; }; @@ -107,7 +171,7 @@ compatible = "snps,dw-apb-timer"; reg = <0x2c14 0x14>; interrupts = <9>; - clocks = <&cfgclk>; + clocks = <&chip CLKID_CFG>; clock-names = "timer"; status = "okay"; }; @@ -116,7 +180,7 @@ compatible = "snps,dw-apb-timer"; reg = <0x2c28 0x14>; interrupts = <10>; - clocks = <&cfgclk>; + clocks = <&chip CLKID_CFG>; clock-names = "timer"; status = "disabled"; }; @@ -125,7 +189,7 @@ compatible = "snps,dw-apb-timer"; reg = <0x2c3c 0x14>; interrupts = <11>; - clocks = <&cfgclk>; + clocks = <&chip CLKID_CFG>; clock-names = "timer"; status = "disabled"; }; @@ -134,7 +198,7 @@ compatible = "snps,dw-apb-timer"; reg = <0x2c50 0x14>; interrupts = <12>; - clocks = <&cfgclk>; + clocks = <&chip CLKID_CFG>; clock-names = "timer"; status = "disabled"; }; @@ -143,7 +207,7 @@ compatible = "snps,dw-apb-timer"; reg = <0x2c64 0x14>; interrupts = <13>; - clocks = <&cfgclk>; + clocks = <&chip CLKID_CFG>; clock-names = "timer"; status = "disabled"; }; @@ -152,7 +216,7 @@ compatible = "snps,dw-apb-timer"; reg = <0x2c78 0x14>; interrupts = <14>; - clocks = <&cfgclk>; + clocks = <&chip CLKID_CFG>; clock-names = "timer"; status = "disabled"; }; @@ -161,7 +225,7 @@ compatible = "snps,dw-apb-timer"; reg = <0x2c8c 0x14>; interrupts = <15>; - clocks = <&cfgclk>; + clocks = <&chip CLKID_CFG>; clock-names = "timer"; status = "disabled"; }; @@ -176,6 +240,14 @@ }; }; + chip: chip-control@ea0000 { + compatible = "marvell,berlin2-chip-ctrl"; + #clock-cells = <1>; + reg = <0xea0000 0x400>; + clocks = <&refclk>; + clock-names = "refclk"; + }; + apb@fc0000 { compatible = "simple-bus"; #address-cells = <1>; @@ -184,13 +256,48 @@ ranges = <0 0xfc0000 0x10000>; interrupt-parent = <&sic>; + sm_gpio1: gpio@5000 { + compatible = "snps,dw-apb-gpio"; + reg = <0x5000 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + portf: gpio-port@5 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <8>; + reg = <0>; + }; + }; + + sm_gpio0: gpio@c000 { + compatible = "snps,dw-apb-gpio"; + reg = <0xc000 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + porte: gpio-port@4 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <8>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <11>; + }; + }; + uart0: serial@9000 { compatible = "snps,dw-apb-uart"; reg = <0x9000 0x100>; reg-shift = <2>; reg-io-width = <1>; interrupts = <8>; - clocks = <&smclk>; + clocks = <&refclk>; + pinctrl-0 = <&uart0_pmux>; + pinctrl-names = "default"; status = "disabled"; }; @@ -200,7 +307,9 @@ reg-shift = <2>; reg-io-width = <1>; interrupts = <9>; - clocks = <&smclk>; + clocks = <&refclk>; + pinctrl-0 = <&uart1_pmux>; + pinctrl-names = "default"; status = "disabled"; }; @@ -210,10 +319,32 @@ reg-shift = <2>; reg-io-width = <1>; interrupts = <10>; - clocks = <&smclk>; + clocks = <&refclk>; + pinctrl-0 = <&uart2_pmux>; + pinctrl-names = "default"; status = "disabled"; }; + sysctrl: system-controller@d000 { + compatible = "marvell,berlin2-system-ctrl"; + reg = <0xd000 0x100>; + + uart0_pmux: uart0-pmux { + groups = "GSM4"; + function = "uart0"; + }; + + uart1_pmux: uart1-pmux { + groups = "GSM5"; + function = "uart1"; + }; + + uart2_pmux: uart2-pmux { + groups = "GSM3"; + function = "uart2"; + }; + }; + sic: interrupt-controller@e000 { compatible = "snps,dw-apb-ictl"; reg = <0xe000 0x400>; diff --git a/arch/arm/boot/dts/berlin2cd.dtsi b/arch/arm/boot/dts/berlin2cd.dtsi index 094968c27533..cc1df65da504 100644 --- a/arch/arm/boot/dts/berlin2cd.dtsi +++ b/arch/arm/boot/dts/berlin2cd.dtsi @@ -12,6 +12,7 @@ */ #include "skeleton.dtsi" +#include <dt-bindings/clock/berlin2.h> #include <dt-bindings/interrupt-controller/arm-gic.h> / { @@ -30,24 +31,10 @@ }; }; - clocks { - smclk: sysmgr-clock { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <25000000>; - }; - - cfgclk: cfg-clock { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <75000000>; - }; - - sysclk: system-clock { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <300000000>; - }; + refclk: oscillator { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; }; soc { @@ -76,7 +63,7 @@ compatible = "arm,cortex-a9-twd-timer"; reg = <0xad0600 0x20>; interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&sysclk>; + clocks = <&chip CLKID_TWD>; }; apb@e80000 { @@ -87,11 +74,83 @@ ranges = <0 0xe80000 0x10000>; interrupt-parent = <&aic>; + gpio0: gpio@0400 { + compatible = "snps,dw-apb-gpio"; + reg = <0x0400 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + porta: gpio-port@0 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <8>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <0>; + }; + }; + + gpio1: gpio@0800 { + compatible = "snps,dw-apb-gpio"; + reg = <0x0800 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + portb: gpio-port@1 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <8>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <1>; + }; + }; + + gpio2: gpio@0c00 { + compatible = "snps,dw-apb-gpio"; + reg = <0x0c00 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + portc: gpio-port@2 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <8>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <2>; + }; + }; + + gpio3: gpio@1000 { + compatible = "snps,dw-apb-gpio"; + reg = <0x1000 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + portd: gpio-port@3 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <8>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <3>; + }; + }; + timer0: timer@2c00 { compatible = "snps,dw-apb-timer"; reg = <0x2c00 0x14>; interrupts = <8>; - clocks = <&cfgclk>; + clocks = <&chip CLKID_CFG>; clock-names = "timer"; status = "okay"; }; @@ -100,7 +159,7 @@ compatible = "snps,dw-apb-timer"; reg = <0x2c14 0x14>; interrupts = <9>; - clocks = <&cfgclk>; + clocks = <&chip CLKID_CFG>; clock-names = "timer"; status = "okay"; }; @@ -109,7 +168,7 @@ compatible = "snps,dw-apb-timer"; reg = <0x2c28 0x14>; interrupts = <10>; - clocks = <&cfgclk>; + clocks = <&chip CLKID_CFG>; clock-names = "timer"; status = "disabled"; }; @@ -118,7 +177,7 @@ compatible = "snps,dw-apb-timer"; reg = <0x2c3c 0x14>; interrupts = <11>; - clocks = <&cfgclk>; + clocks = <&chip CLKID_CFG>; clock-names = "timer"; status = "disabled"; }; @@ -127,7 +186,7 @@ compatible = "snps,dw-apb-timer"; reg = <0x2c50 0x14>; interrupts = <12>; - clocks = <&cfgclk>; + clocks = <&chip CLKID_CFG>; clock-names = "timer"; status = "disabled"; }; @@ -136,7 +195,7 @@ compatible = "snps,dw-apb-timer"; reg = <0x2c64 0x14>; interrupts = <13>; - clocks = <&cfgclk>; + clocks = <&chip CLKID_CFG>; clock-names = "timer"; status = "disabled"; }; @@ -145,7 +204,7 @@ compatible = "snps,dw-apb-timer"; reg = <0x2c78 0x14>; interrupts = <14>; - clocks = <&cfgclk>; + clocks = <&chip CLKID_CFG>; clock-names = "timer"; status = "disabled"; }; @@ -154,7 +213,7 @@ compatible = "snps,dw-apb-timer"; reg = <0x2c8c 0x14>; interrupts = <15>; - clocks = <&cfgclk>; + clocks = <&chip CLKID_CFG>; clock-names = "timer"; status = "disabled"; }; @@ -169,6 +228,19 @@ }; }; + chip: chip-control@ea0000 { + compatible = "marvell,berlin2cd-chip-ctrl"; + #clock-cells = <1>; + reg = <0xea0000 0x400>; + clocks = <&refclk>; + clock-names = "refclk"; + + uart0_pmux: uart0-pmux { + groups = "G6"; + function = "uart0"; + }; + }; + apb@fc0000 { compatible = "simple-bus"; #address-cells = <1>; @@ -177,13 +249,45 @@ ranges = <0 0xfc0000 0x10000>; interrupt-parent = <&sic>; + sm_gpio1: gpio@5000 { + compatible = "snps,dw-apb-gpio"; + reg = <0x5000 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + portf: gpio-port@5 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <8>; + reg = <0>; + }; + }; + + sm_gpio0: gpio@c000 { + compatible = "snps,dw-apb-gpio"; + reg = <0xc000 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + porte: gpio-port@4 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <8>; + reg = <0>; + }; + }; + uart0: serial@9000 { compatible = "snps,dw-apb-uart"; reg = <0x9000 0x100>; reg-shift = <2>; reg-io-width = <1>; interrupts = <8>; - clocks = <&smclk>; + clocks = <&refclk>; + pinctrl-0 = <&uart0_pmux>; + pinctrl-names = "default"; status = "disabled"; }; @@ -193,10 +297,15 @@ reg-shift = <2>; reg-io-width = <1>; interrupts = <9>; - clocks = <&smclk>; + clocks = <&refclk>; status = "disabled"; }; + sysctrl: system-controller@d000 { + compatible = "marvell,berlin2cd-system-ctrl"; + reg = <0xd000 0x100>; + }; + sic: interrupt-controller@e000 { compatible = "snps,dw-apb-ictl"; reg = <0xe000 0x400>; diff --git a/arch/arm/boot/dts/berlin2q-marvell-dmp.dts b/arch/arm/boot/dts/berlin2q-marvell-dmp.dts new file mode 100644 index 000000000000..995150f93795 --- /dev/null +++ b/arch/arm/boot/dts/berlin2q-marvell-dmp.dts @@ -0,0 +1,39 @@ +/* + * Copyright (C) 2014 Antoine Ténart <antoine.tenart@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/dts-v1/; +#include "berlin2q.dtsi" + +/ { + model = "Marvell BG2-Q DMP"; + compatible = "marvell,berlin2q-dmp", "marvell,berlin2q", "marvell,berlin"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x80000000>; + }; + + choosen { + bootargs = "console=ttyS0,115200 earlyprintk"; + }; +}; + +&sdhci1 { + broken-cd; + sdhci,wp-inverted; + status = "okay"; +}; + +&sdhci2 { + non-removable; + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi new file mode 100644 index 000000000000..635a16a64cb4 --- /dev/null +++ b/arch/arm/boot/dts/berlin2q.dtsi @@ -0,0 +1,363 @@ +/* + * Copyright (C) 2014 Antoine Ténart <antoine.tenart@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <dt-bindings/clock/berlin2q.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +#include "skeleton.dtsi" + +/ { + model = "Marvell Armada 1500 pro (BG2-Q) SoC"; + compatible = "marvell,berlin2q", "marvell,berlin"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-a9"; + device_type = "cpu"; + next-level-cache = <&l2>; + reg = <0>; + }; + + cpu@1 { + compatible = "arm,cortex-a9"; + device_type = "cpu"; + next-level-cache = <&l2>; + reg = <1>; + }; + + cpu@2 { + compatible = "arm,cortex-a9"; + device_type = "cpu"; + next-level-cache = <&l2>; + reg = <2>; + }; + + cpu@3 { + compatible = "arm,cortex-a9"; + device_type = "cpu"; + next-level-cache = <&l2>; + reg = <3>; + }; + }; + + refclk: oscillator { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0 0xf7000000 0x1000000>; + interrupt-parent = <&gic>; + + sdhci0: sdhci@ab0000 { + compatible = "mrvl,pxav3-mmc"; + reg = <0xab0000 0x200>; + clocks = <&chip CLKID_SDIO1XIN>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + sdhci1: sdhci@ab0800 { + compatible = "mrvl,pxav3-mmc"; + reg = <0xab0800 0x200>; + clocks = <&chip CLKID_SDIO1XIN>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + sdhci2: sdhci@ab1000 { + compatible = "mrvl,pxav3-mmc"; + reg = <0xab1000 0x200>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&chip CLKID_SDIO1XIN>; + status = "disabled"; + }; + + l2: l2-cache-controller@ac0000 { + compatible = "arm,pl310-cache"; + reg = <0xac0000 0x1000>; + cache-level = <2>; + }; + + scu: snoop-control-unit@ad0000 { + compatible = "arm,cortex-a9-scu"; + reg = <0xad0000 0x58>; + }; + + local-timer@ad0600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0xad0600 0x20>; + clocks = <&chip CLKID_TWD>; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>; + }; + + gic: interrupt-controller@ad1000 { + compatible = "arm,cortex-a9-gic"; + reg = <0xad1000 0x1000>, <0xad0100 0x100>; + interrupt-controller; + #interrupt-cells = <3>; + }; + + apb@e80000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0 0xe80000 0x10000>; + interrupt-parent = <&aic>; + + gpio0: gpio@0400 { + compatible = "snps,dw-apb-gpio"; + reg = <0x0400 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + porta: gpio-port@0 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <32>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <0>; + }; + }; + + gpio1: gpio@0800 { + compatible = "snps,dw-apb-gpio"; + reg = <0x0800 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + portb: gpio-port@1 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <32>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <1>; + }; + }; + + gpio2: gpio@0c00 { + compatible = "snps,dw-apb-gpio"; + reg = <0x0c00 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + portc: gpio-port@2 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <32>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <2>; + }; + }; + + gpio3: gpio@1000 { + compatible = "snps,dw-apb-gpio"; + reg = <0x1000 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + portd: gpio-port@3 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <32>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <3>; + }; + }; + + timer0: timer@2c00 { + compatible = "snps,dw-apb-timer"; + reg = <0x2c00 0x14>; + clocks = <&chip CLKID_CFG>; + clock-names = "timer"; + interrupts = <8>; + }; + + timer1: timer@2c14 { + compatible = "snps,dw-apb-timer"; + reg = <0x2c14 0x14>; + clocks = <&chip CLKID_CFG>; + clock-names = "timer"; + status = "disabled"; + }; + + timer2: timer@2c28 { + compatible = "snps,dw-apb-timer"; + reg = <0x2c28 0x14>; + clocks = <&chip CLKID_CFG>; + clock-names = "timer"; + status = "disabled"; + }; + + timer3: timer@2c3c { + compatible = "snps,dw-apb-timer"; + reg = <0x2c3c 0x14>; + clocks = <&chip CLKID_CFG>; + clock-names = "timer"; + status = "disabled"; + }; + + timer4: timer@2c50 { + compatible = "snps,dw-apb-timer"; + reg = <0x2c50 0x14>; + clocks = <&chip CLKID_CFG>; + clock-names = "timer"; + status = "disabled"; + }; + + timer5: timer@2c64 { + compatible = "snps,dw-apb-timer"; + reg = <0x2c64 0x14>; + clocks = <&chip CLKID_CFG>; + clock-names = "timer"; + status = "disabled"; + }; + + timer6: timer@2c78 { + compatible = "snps,dw-apb-timer"; + reg = <0x2c78 0x14>; + clocks = <&chip CLKID_CFG>; + clock-names = "timer"; + status = "disabled"; + }; + + timer7: timer@2c8c { + compatible = "snps,dw-apb-timer"; + reg = <0x2c8c 0x14>; + clocks = <&chip CLKID_CFG>; + clock-names = "timer"; + status = "disabled"; + }; + + aic: interrupt-controller@3800 { + compatible = "snps,dw-apb-ictl"; + reg = <0x3800 0x30>; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + }; + + gpio4: gpio@5000 { + compatible = "snps,dw-apb-gpio"; + reg = <0x5000 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + porte: gpio-port@4 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <32>; + reg = <0>; + }; + }; + + gpio5: gpio@c000 { + compatible = "snps,dw-apb-gpio"; + reg = <0xc000 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + portf: gpio-port@5 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <32>; + reg = <0>; + }; + }; + }; + + chip: chip-control@ea0000 { + compatible = "marvell,berlin2q-chip-ctrl"; + #clock-cells = <1>; + reg = <0xea0000 0x400>, <0xdd0170 0x10>; + clocks = <&refclk>; + clock-names = "refclk"; + }; + + apb@fc0000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0 0xfc0000 0x10000>; + interrupt-parent = <&sic>; + + uart0: uart@9000 { + compatible = "snps,dw-apb-uart"; + reg = <0x9000 0x100>; + interrupt-parent = <&sic>; + interrupts = <8>; + clocks = <&refclk>; + reg-shift = <2>; + pinctrl-0 = <&uart0_pmux>; + pinctrl-names = "default"; + status = "disabled"; + }; + + uart1: uart@a000 { + compatible = "snps,dw-apb-uart"; + reg = <0xa000 0x100>; + interrupt-parent = <&sic>; + interrupts = <9>; + clocks = <&refclk>; + reg-shift = <2>; + pinctrl-0 = <&uart1_pmux>; + pinctrl-names = "default"; + status = "disabled"; + }; + + sysctrl: pin-controller@d000 { + compatible = "marvell,berlin2q-system-ctrl"; + reg = <0xd000 0x100>; + + uart0_pmux: uart0-pmux { + groups = "GSM12"; + function = "uart0"; + }; + + uart1_pmux: uart1-pmux { + groups = "GSM14"; + function = "uart1"; + }; + }; + + sic: interrupt-controller@e000 { + compatible = "snps,dw-apb-ictl"; + reg = <0xe000 0x30>; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index 5babba0a3a75..4adc28039c30 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -7,11 +7,11 @@ */ /dts-v1/; -#include "dra7.dtsi" +#include "dra74x.dtsi" / { - model = "TI DRA7"; - compatible = "ti,dra7-evm", "ti,dra752", "ti,dra7"; + model = "TI DRA742"; + compatible = "ti,dra7-evm", "ti,dra742", "ti,dra74", "ti,dra7"; memory { device_type = "memory"; @@ -93,6 +93,64 @@ 0x24c (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_txd */ >; }; + + qspi1_pins: pinmux_qspi1_pins { + pinctrl-single,pins = < + 0x4c (PIN_INPUT | MUX_MODE1) /* gpmc_a3.qspi1_cs2 */ + 0x50 (PIN_INPUT | MUX_MODE1) /* gpmc_a4.qspi1_cs3 */ + 0x74 (PIN_INPUT | MUX_MODE1) /* gpmc_a13.qspi1_rtclk */ + 0x78 (PIN_INPUT | MUX_MODE1) /* gpmc_a14.qspi1_d3 */ + 0x7c (PIN_INPUT | MUX_MODE1) /* gpmc_a15.qspi1_d2 */ + 0x80 (PIN_INPUT | MUX_MODE1) /* gpmc_a16.qspi1_d1 */ + 0x84 (PIN_INPUT | MUX_MODE1) /* gpmc_a17.qspi1_d0 */ + 0x88 (PIN_INPUT | MUX_MODE1) /* qpmc_a18.qspi1_sclk */ + 0xb8 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs2.qspi1_cs0 */ + 0xbc (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs3.qspi1_cs1 */ + >; + }; + + usb1_pins: pinmux_usb1_pins { + pinctrl-single,pins = < + 0x280 (PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */ + >; + }; + + usb2_pins: pinmux_usb2_pins { + pinctrl-single,pins = < + 0x284 (PIN_INPUT_SLEW | MUX_MODE0) /* usb2_drvvbus */ + >; + }; + + nand_flash_x16: nand_flash_x16 { + /* On DRA7 EVM, GPMC_WPN and NAND_BOOTn comes from DIP switch + * So NAND flash requires following switch settings: + * SW5.9 (GPMC_WPN) = LOW + * SW5.1 (NAND_BOOTn) = HIGH */ + pinctrl-single,pins = < + 0x0 (PIN_INPUT | MUX_MODE0) /* gpmc_ad0 */ + 0x4 (PIN_INPUT | MUX_MODE0) /* gpmc_ad1 */ + 0x8 (PIN_INPUT | MUX_MODE0) /* gpmc_ad2 */ + 0xc (PIN_INPUT | MUX_MODE0) /* gpmc_ad3 */ + 0x10 (PIN_INPUT | MUX_MODE0) /* gpmc_ad4 */ + 0x14 (PIN_INPUT | MUX_MODE0) /* gpmc_ad5 */ + 0x18 (PIN_INPUT | MUX_MODE0) /* gpmc_ad6 */ + 0x1c (PIN_INPUT | MUX_MODE0) /* gpmc_ad7 */ + 0x20 (PIN_INPUT | MUX_MODE0) /* gpmc_ad8 */ + 0x24 (PIN_INPUT | MUX_MODE0) /* gpmc_ad9 */ + 0x28 (PIN_INPUT | MUX_MODE0) /* gpmc_ad10 */ + 0x2c (PIN_INPUT | MUX_MODE0) /* gpmc_ad11 */ + 0x30 (PIN_INPUT | MUX_MODE0) /* gpmc_ad12 */ + 0x34 (PIN_INPUT | MUX_MODE0) /* gpmc_ad13 */ + 0x38 (PIN_INPUT | MUX_MODE0) /* gpmc_ad14 */ + 0x3c (PIN_INPUT | MUX_MODE0) /* gpmc_ad15 */ + 0xd8 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0 */ + 0xcc (PIN_OUTPUT | MUX_MODE0) /* gpmc_wen */ + 0xb4 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_csn0 */ + 0xc4 (PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale */ + 0xc8 (PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren */ + 0xd0 (PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle */ + >; + }; }; &i2c1 { @@ -273,3 +331,167 @@ &cpu0 { cpu0-supply = <&smps123_reg>; }; + +&qspi { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&qspi1_pins>; + + spi-max-frequency = <48000000>; + m25p80@0 { + compatible = "s25fl256s1"; + spi-max-frequency = <48000000>; + reg = <0>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; + spi-cpol; + spi-cpha; + #address-cells = <1>; + #size-cells = <1>; + + /* MTD partition table. + * The ROM checks the first four physical blocks + * for a valid file to boot and the flash here is + * 64KiB block size. + */ + partition@0 { + label = "QSPI.SPL"; + reg = <0x00000000 0x000010000>; + }; + partition@1 { + label = "QSPI.SPL.backup1"; + reg = <0x00010000 0x00010000>; + }; + partition@2 { + label = "QSPI.SPL.backup2"; + reg = <0x00020000 0x00010000>; + }; + partition@3 { + label = "QSPI.SPL.backup3"; + reg = <0x00030000 0x00010000>; + }; + partition@4 { + label = "QSPI.u-boot"; + reg = <0x00040000 0x00100000>; + }; + partition@5 { + label = "QSPI.u-boot-spl-os"; + reg = <0x00140000 0x00010000>; + }; + partition@6 { + label = "QSPI.u-boot-env"; + reg = <0x00150000 0x00010000>; + }; + partition@7 { + label = "QSPI.u-boot-env.backup1"; + reg = <0x00160000 0x0010000>; + }; + partition@8 { + label = "QSPI.kernel"; + reg = <0x00170000 0x0800000>; + }; + partition@9 { + label = "QSPI.file-system"; + reg = <0x00970000 0x01690000>; + }; + }; +}; + +&usb1 { + dr_mode = "peripheral"; + pinctrl-names = "default"; + pinctrl-0 = <&usb1_pins>; +}; + +&usb2 { + dr_mode = "host"; + pinctrl-names = "default"; + pinctrl-0 = <&usb2_pins>; +}; + +&elm { + status = "okay"; +}; + +&gpmc { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&nand_flash_x16>; + ranges = <0 0 0 0x01000000>; /* minimum GPMC partition = 16MB */ + nand@0,0 { + reg = <0 0 4>; /* device IO registers */ + ti,nand-ecc-opt = "bch8"; + ti,elm-id = <&elm>; + nand-bus-width = <16>; + gpmc,device-width = <2>; + gpmc,sync-clk-ps = <0>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <40>; + gpmc,cs-wr-off-ns = <40>; + gpmc,adv-on-ns = <0>; + gpmc,adv-rd-off-ns = <30>; + gpmc,adv-wr-off-ns = <30>; + gpmc,we-on-ns = <5>; + gpmc,we-off-ns = <25>; + gpmc,oe-on-ns = <2>; + gpmc,oe-off-ns = <20>; + gpmc,access-ns = <20>; + gpmc,wr-access-ns = <40>; + gpmc,rd-cycle-ns = <40>; + gpmc,wr-cycle-ns = <40>; + gpmc,wait-pin = <0>; + gpmc,wait-on-read; + gpmc,wait-on-write; + gpmc,bus-turnaround-ns = <0>; + gpmc,cycle2cycle-delay-ns = <0>; + gpmc,clk-activation-ns = <0>; + gpmc,wait-monitoring-ns = <0>; + gpmc,wr-data-mux-bus-ns = <0>; + /* MTD partition table */ + /* All SPL-* partitions are sized to minimal length + * which can be independently programmable. For + * NAND flash this is equal to size of erase-block */ + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "NAND.SPL"; + reg = <0x00000000 0x000020000>; + }; + partition@1 { + label = "NAND.SPL.backup1"; + reg = <0x00020000 0x00020000>; + }; + partition@2 { + label = "NAND.SPL.backup2"; + reg = <0x00040000 0x00020000>; + }; + partition@3 { + label = "NAND.SPL.backup3"; + reg = <0x00060000 0x00020000>; + }; + partition@4 { + label = "NAND.u-boot-spl-os"; + reg = <0x00080000 0x00040000>; + }; + partition@5 { + label = "NAND.u-boot"; + reg = <0x000c0000 0x00100000>; + }; + partition@6 { + label = "NAND.u-boot-env"; + reg = <0x001c0000 0x00020000>; + }; + partition@7 { + label = "NAND.u-boot-env"; + reg = <0x001e0000 0x00020000>; + }; + partition@8 { + label = "NAND.kernel"; + reg = <0x00200000 0x00800000>; + }; + partition@9 { + label = "NAND.file-system"; + reg = <0x00a00000 0x0f600000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index ab01f2d0e590..c29945e07c5a 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -33,33 +33,6 @@ serial5 = &uart6; }; - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu0: cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a15"; - reg = <0>; - - operating-points = < - /* kHz uV */ - 1000000 1060000 - 1176000 1160000 - >; - - clocks = <&dpll_mpu_ck>; - clock-names = "cpu"; - - clock-latency = <300000>; /* From omap-cpufreq driver */ - }; - cpu@1 { - device_type = "cpu"; - compatible = "arm,cortex-a15"; - reg = <1>; - }; - }; - timer { compatible = "arm,armv7-timer"; interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, @@ -789,6 +762,228 @@ dma-names = "tx0", "rx0"; status = "disabled"; }; + + qspi: qspi@4b300000 { + compatible = "ti,dra7xxx-qspi"; + reg = <0x4b300000 0x100>; + reg-names = "qspi_base"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "qspi"; + clocks = <&qspi_gfclk_div>; + clock-names = "fck"; + num-cs = <4>; + interrupts = <0 343 0x4>; + status = "disabled"; + }; + + omap_control_sata: control-phy@4a002374 { + compatible = "ti,control-phy-pipe3"; + reg = <0x4a002374 0x4>; + reg-names = "power"; + clocks = <&sys_clkin1>; + clock-names = "sysclk"; + }; + + /* OCP2SCP3 */ + ocp2scp@4a090000 { + compatible = "ti,omap-ocp2scp"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + reg = <0x4a090000 0x20>; + ti,hwmods = "ocp2scp3"; + sata_phy: phy@4A096000 { + compatible = "ti,phy-pipe3-sata"; + reg = <0x4A096000 0x80>, /* phy_rx */ + <0x4A096400 0x64>, /* phy_tx */ + <0x4A096800 0x40>; /* pll_ctrl */ + reg-names = "phy_rx", "phy_tx", "pll_ctrl"; + ctrl-module = <&omap_control_sata>; + clocks = <&sys_clkin1>; + clock-names = "sysclk"; + #phy-cells = <0>; + }; + }; + + sata: sata@4a141100 { + compatible = "snps,dwc-ahci"; + reg = <0x4a140000 0x1100>, <0x4a141100 0x7>; + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; + phys = <&sata_phy>; + phy-names = "sata-phy"; + clocks = <&sata_ref_clk>; + ti,hwmods = "sata"; + }; + + omap_control_usb2phy1: control-phy@4a002300 { + compatible = "ti,control-phy-usb2"; + reg = <0x4a002300 0x4>; + reg-names = "power"; + }; + + omap_control_usb3phy1: control-phy@4a002370 { + compatible = "ti,control-phy-pipe3"; + reg = <0x4a002370 0x4>; + reg-names = "power"; + }; + + omap_control_usb2phy2: control-phy@0x4a002e74 { + compatible = "ti,control-phy-usb2-dra7"; + reg = <0x4a002e74 0x4>; + reg-names = "power"; + }; + + /* OCP2SCP1 */ + ocp2scp@4a080000 { + compatible = "ti,omap-ocp2scp"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + reg = <0x4a080000 0x20>; + ti,hwmods = "ocp2scp1"; + + usb2_phy1: phy@4a084000 { + compatible = "ti,omap-usb2"; + reg = <0x4a084000 0x400>; + ctrl-module = <&omap_control_usb2phy1>; + clocks = <&usb_phy1_always_on_clk32k>, + <&usb_otg_ss1_refclk960m>; + clock-names = "wkupclk", + "refclk"; + #phy-cells = <0>; + }; + + usb2_phy2: phy@4a085000 { + compatible = "ti,omap-usb2"; + reg = <0x4a085000 0x400>; + ctrl-module = <&omap_control_usb2phy2>; + clocks = <&usb_phy2_always_on_clk32k>, + <&usb_otg_ss2_refclk960m>; + clock-names = "wkupclk", + "refclk"; + #phy-cells = <0>; + }; + + usb3_phy1: phy@4a084400 { + compatible = "ti,omap-usb3"; + reg = <0x4a084400 0x80>, + <0x4a084800 0x64>, + <0x4a084c00 0x40>; + reg-names = "phy_rx", "phy_tx", "pll_ctrl"; + ctrl-module = <&omap_control_usb3phy1>; + clocks = <&usb_phy3_always_on_clk32k>, + <&sys_clkin1>, + <&usb_otg_ss1_refclk960m>; + clock-names = "wkupclk", + "sysclk", + "refclk"; + #phy-cells = <0>; + }; + }; + + omap_dwc3_1@48880000 { + compatible = "ti,dwc3"; + ti,hwmods = "usb_otg_ss1"; + reg = <0x48880000 0x10000>; + interrupts = <0 77 4>; + #address-cells = <1>; + #size-cells = <1>; + utmi-mode = <2>; + ranges; + usb1: usb@48890000 { + compatible = "snps,dwc3"; + reg = <0x48890000 0x17000>; + interrupts = <0 76 4>; + phys = <&usb2_phy1>, <&usb3_phy1>; + phy-names = "usb2-phy", "usb3-phy"; + tx-fifo-resize; + maximum-speed = "super-speed"; + dr_mode = "otg"; + }; + }; + + omap_dwc3_2@488c0000 { + compatible = "ti,dwc3"; + ti,hwmods = "usb_otg_ss2"; + reg = <0x488c0000 0x10000>; + interrupts = <0 92 4>; + #address-cells = <1>; + #size-cells = <1>; + utmi-mode = <2>; + ranges; + usb2: usb@488d0000 { + compatible = "snps,dwc3"; + reg = <0x488d0000 0x17000>; + interrupts = <0 78 4>; + phys = <&usb2_phy2>; + phy-names = "usb2-phy"; + tx-fifo-resize; + maximum-speed = "high-speed"; + dr_mode = "otg"; + }; + }; + + /* IRQ for DWC3_3 and DWC3_4 need IRQ crossbar */ + omap_dwc3_3@48900000 { + compatible = "ti,dwc3"; + ti,hwmods = "usb_otg_ss3"; + reg = <0x48900000 0x10000>; + /* interrupts = <0 TBD 4>; */ + #address-cells = <1>; + #size-cells = <1>; + utmi-mode = <2>; + ranges; + status = "disabled"; + usb3: usb@48910000 { + compatible = "snps,dwc3"; + reg = <0x48910000 0x17000>; + /* interrupts = <0 93 4>; */ + tx-fifo-resize; + maximum-speed = "high-speed"; + dr_mode = "otg"; + }; + }; + + omap_dwc3_4@48940000 { + compatible = "ti,dwc3"; + ti,hwmods = "usb_otg_ss4"; + reg = <0x48940000 0x10000>; + /* interrupts = <0 TBD 4>; */ + #address-cells = <1>; + #size-cells = <1>; + utmi-mode = <2>; + ranges; + status = "disabled"; + usb4: usb@48950000 { + compatible = "snps,dwc3"; + reg = <0x48950000 0x17000>; + /* interrupts = <0 TBD 4>; */ + tx-fifo-resize; + maximum-speed = "high-speed"; + dr_mode = "otg"; + }; + }; + + elm: elm@48078000 { + compatible = "ti,am3352-elm"; + reg = <0x48078000 0xfc0>; /* device IO registers */ + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "elm"; + status = "disabled"; + }; + + gpmc: gpmc@50000000 { + compatible = "ti,am3352-gpmc"; + ti,hwmods = "gpmc"; + reg = <0x50000000 0x37c>; /* device IO registers */ + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + gpmc,num-cs = <8>; + gpmc,num-waitpins = <2>; + #address-cells = <2>; + #size-cells = <1>; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts new file mode 100644 index 000000000000..514702348818 --- /dev/null +++ b/arch/arm/boot/dts/dra72-evm.dts @@ -0,0 +1,24 @@ +/* + * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "dra72x.dtsi" + +/ { + model = "TI DRA722"; + compatible = "ti,dra72-evm", "ti,dra722", "ti,dra72", "ti,dra7"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x40000000>; /* 1024 MB */ + }; +}; + +&uart1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/dra72x.dtsi b/arch/arm/boot/dts/dra72x.dtsi new file mode 100644 index 000000000000..f1ec22f6ebf4 --- /dev/null +++ b/arch/arm/boot/dts/dra72x.dtsi @@ -0,0 +1,25 @@ +/* + * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * Based on "omap4.dtsi" + */ + +#include "dra7.dtsi" + +/ { + compatible = "ti,dra722", "ti,dra72", "ti,dra7"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/dra74x.dtsi b/arch/arm/boot/dts/dra74x.dtsi new file mode 100644 index 000000000000..a4e8bb9f95c0 --- /dev/null +++ b/arch/arm/boot/dts/dra74x.dtsi @@ -0,0 +1,41 @@ +/* + * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * Based on "omap4.dtsi" + */ + +#include "dra7.dtsi" + +/ { + compatible = "ti,dra742", "ti,dra74", "ti,dra7"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0>; + + operating-points = < + /* kHz uV */ + 1000000 1060000 + 1176000 1160000 + >; + + clocks = <&dpll_mpu_ck>; + clock-names = "cpu"; + + clock-latency = <300000>; /* From omap-cpufreq driver */ + }; + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <1>; + }; + }; +}; diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi index cfb8fc753f50..c7676871d9c0 100644 --- a/arch/arm/boot/dts/dra7xx-clocks.dtsi +++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi @@ -1386,6 +1386,14 @@ ti,dividers = <1>, <8>; }; + l3init_960m_gfclk: l3init_960m_gfclk { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&dpll_usb_clkdcoldo>; + ti,bit-shift = <8>; + reg = <0x06c0>; + }; + dss_32khz_clk: dss_32khz_clk { #clock-cells = <0>; compatible = "ti,gate-clock"; @@ -1533,7 +1541,7 @@ usb_otg_ss1_refclk960m: usb_otg_ss1_refclk960m { #clock-cells = <0>; compatible = "ti,gate-clock"; - clocks = <&dpll_usb_clkdcoldo>; + clocks = <&l3init_960m_gfclk>; ti,bit-shift = <8>; reg = <0x13f0>; }; @@ -1541,7 +1549,7 @@ usb_otg_ss2_refclk960m: usb_otg_ss2_refclk960m { #clock-cells = <0>; compatible = "ti,gate-clock"; - clocks = <&dpll_usb_clkdcoldo>; + clocks = <&l3init_960m_gfclk>; ti,bit-shift = <8>; reg = <0x1340>; }; diff --git a/arch/arm/boot/dts/exynos3250-pinctrl.dtsi b/arch/arm/boot/dts/exynos3250-pinctrl.dtsi new file mode 100644 index 000000000000..47b92c150f4e --- /dev/null +++ b/arch/arm/boot/dts/exynos3250-pinctrl.dtsi @@ -0,0 +1,475 @@ +/* + * Samsung's Exynos3250 SoCs pin-mux and pin-config device tree source + * + * Copyright (c) 2014 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Samsung's Exynos3250 SoCs pin-mux and pin-config optiosn are listed as device + * tree nodes are listed in this file. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +&pinctrl_0 { + gpa0: gpa0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpa1: gpa1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb: gpb { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc0: gpc0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc1: gpc1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd0: gpd0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd1: gpd1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + uart0_data: uart0-data { + samsung,pins = "gpa0-0", "gpa0-1"; + samsung,pin-function = <0x2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart0_fctl: uart0-fctl { + samsung,pins = "gpa0-2", "gpa0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart1_data: uart1-data { + samsung,pins = "gpa0-4", "gpa0-5"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart1_fctl: uart1-fctl { + samsung,pins = "gpa0-6", "gpa0-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + i2c2_bus: i2c2-bus { + samsung,pins = "gpa0-6", "gpa0-7"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2c3_bus: i2c3-bus { + samsung,pins = "gpa1-2", "gpa1-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + spi0_bus: spi0-bus { + samsung,pins = "gpb-0", "gpb-2", "gpb-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2c4_bus: i2c4-bus { + samsung,pins = "gpb-0", "gpb-1"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + spi1_bus: spi1-bus { + samsung,pins = "gpb-4", "gpb-6", "gpb-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2c5_bus: i2c5-bus { + samsung,pins = "gpb-2", "gpb-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2s2_bus: i2s2-bus { + samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3", + "gpc1-4"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pcm2_bus: pcm2-bus { + samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3", + "gpc1-4"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + i2c6_bus: i2c6-bus { + samsung,pins = "gpc1-3", "gpc1-4"; + samsung,pin-function = <4>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + pwm0_out: pwm0-out { + samsung,pins = "gpd0-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pwm1_out: pwm1-out { + samsung,pins = "gpd0-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + i2c7_bus: i2c7-bus { + samsung,pins = "gpd0-2", "gpd0-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + pwm2_out: pwm2-out { + samsung,pins = "gpd0-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pwm3_out: pwm3-out { + samsung,pins = "gpd0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + i2c0_bus: i2c0-bus { + samsung,pins = "gpd1-0", "gpd1-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + mipi0_clk: mipi0-clk { + samsung,pins = "gpd1-0", "gpd1-1"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + i2c1_bus: i2c1-bus { + samsung,pins = "gpd1-2", "gpd1-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; +}; + +&pinctrl_1 { + gpe0: gpe0 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpe1: gpe1 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpe2: gpe2 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpk0: gpk0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpk1: gpk1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpk2: gpk2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpl0: gpl0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpm0: gpm0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpm1: gpm1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpm2: gpm2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpm3: gpm3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpm4: gpm4 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpx0: gpx0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + interrupt-parent = <&gic>; + interrupts = <0 32 0>, <0 33 0>, <0 34 0>, <0 35 0>, + <0 36 0>, <0 37 0>, <0 38 0>, <0 39 0>; + #interrupt-cells = <2>; + }; + + gpx1: gpx1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + interrupt-parent = <&gic>; + interrupts = <0 40 0>, <0 41 0>, <0 42 0>, <0 43 0>, + <0 44 0>, <0 45 0>, <0 46 0>, <0 47 0>; + #interrupt-cells = <2>; + }; + + gpx2: gpx2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpx3: gpx3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + sd0_clk: sd0-clk { + samsung,pins = "gpk0-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd0_cmd: sd0-cmd { + samsung,pins = "gpk0-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd0_cd: sd0-cd { + samsung,pins = "gpk0-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd0_rdqs: sd0-rdqs { + samsung,pins = "gpk0-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd0_bus1: sd0-bus-width1 { + samsung,pins = "gpk0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd0_bus4: sd0-bus-width4 { + samsung,pins = "gpk0-4", "gpk0-5", "gpk0-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd0_bus8: sd0-bus-width8 { + samsung,pins = "gpl0-0", "gpl0-1", "gpl0-2", "gpl0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd1_clk: sd1-clk { + samsung,pins = "gpk1-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd1_cmd: sd1-cmd { + samsung,pins = "gpk1-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd1_cd: sd1-cd { + samsung,pins = "gpk1-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd1_bus1: sd1-bus-width1 { + samsung,pins = "gpk1-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd1_bus4: sd1-bus-width4 { + samsung,pins = "gpk1-4", "gpk1-5", "gpk1-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + cam_port_b_io: cam-port-b-io { + samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", "gpm0-3", + "gpm0-4", "gpm0-5", "gpm0-6", "gpm0-7", + "gpm1-0", "gpm1-1", "gpm2-0", "gpm2-1"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + cam_port_b_clk_active: cam-port-b-clk-active { + samsung,pins = "gpm2-2"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + cam_port_b_clk_idle: cam-port-b-clk-idle { + samsung,pins = "gpm2-2"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + fimc_is_i2c0: fimc-is-i2c0 { + samsung,pins = "gpm4-0", "gpm4-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + fimc_is_i2c1: fimc-is-i2c1 { + samsung,pins = "gpm4-2", "gpm4-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + fimc_is_uart: fimc-is-uart { + samsung,pins = "gpm3-5", "gpm3-7"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; +}; diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi new file mode 100644 index 000000000000..3e678fa335bf --- /dev/null +++ b/arch/arm/boot/dts/exynos3250.dtsi @@ -0,0 +1,444 @@ +/* + * Samsung's Exynos3250 SoC device tree source + * + * Copyright (c) 2014 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Samsung's Exynos3250 SoC device nodes are listed in this file. Exynos3250 + * based board files can include this file and provide values for board specfic + * bindings. + * + * Note: This file does not include device nodes for all the controllers in + * Exynos3250 SoC. As device tree coverage for Exynos3250 increases, additional + * nodes can be added to this file. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "skeleton.dtsi" +#include <dt-bindings/clock/exynos3250.h> + +/ { + compatible = "samsung,exynos3250"; + interrupt-parent = <&gic>; + + aliases { + pinctrl0 = &pinctrl_0; + pinctrl1 = &pinctrl_1; + mshc0 = &mshc_0; + mshc1 = &mshc_1; + spi0 = &spi_0; + spi1 = &spi_1; + i2c0 = &i2c_0; + i2c1 = &i2c_1; + i2c2 = &i2c_2; + i2c3 = &i2c_3; + i2c4 = &i2c_4; + i2c5 = &i2c_5; + i2c6 = &i2c_6; + i2c7 = &i2c_7; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0>; + clock-frequency = <1000000000>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <1>; + clock-frequency = <1000000000>; + }; + }; + + soc: soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + fixed-rate-clocks { + #address-cells = <1>; + #size-cells = <0>; + + xusbxti: clock@0 { + compatible = "fixed-clock"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + clock-frequency = <0>; + #clock-cells = <0>; + clock-output-names = "xusbxti"; + }; + + xxti: clock@1 { + compatible = "fixed-clock"; + reg = <1>; + clock-frequency = <0>; + #clock-cells = <0>; + clock-output-names = "xxti"; + }; + + xtcxo: clock@2 { + compatible = "fixed-clock"; + reg = <2>; + clock-frequency = <0>; + #clock-cells = <0>; + clock-output-names = "xtcxo"; + }; + }; + + sysram@02020000 { + compatible = "mmio-sram"; + reg = <0x02020000 0x40000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x02020000 0x40000>; + + smp-sysram@0 { + compatible = "samsung,exynos4210-sysram"; + reg = <0x0 0x1000>; + }; + + smp-sysram@3f000 { + compatible = "samsung,exynos4210-sysram-ns"; + reg = <0x3f000 0x1000>; + }; + }; + + chipid@10000000 { + compatible = "samsung,exynos4210-chipid"; + reg = <0x10000000 0x100>; + }; + + sys_reg: syscon@10010000 { + compatible = "samsung,exynos3-sysreg", "syscon"; + reg = <0x10010000 0x400>; + }; + + pmu_system_controller: system-controller@10020000 { + compatible = "samsung,exynos3250-pmu", "syscon"; + reg = <0x10020000 0x4000>; + }; + + pd_cam: cam-power-domain@10023C00 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10023C00 0x20>; + }; + + pd_mfc: mfc-power-domain@10023C40 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10023C40 0x20>; + }; + + pd_g3d: g3d-power-domain@10023C60 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10023C60 0x20>; + }; + + pd_lcd0: lcd0-power-domain@10023C80 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10023C80 0x20>; + }; + + pd_isp: isp-power-domain@10023CA0 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10023CA0 0x20>; + }; + + cmu: clock-controller@10030000 { + compatible = "samsung,exynos3250-cmu"; + reg = <0x10030000 0x20000>; + #clock-cells = <1>; + }; + + rtc: rtc@10070000 { + compatible = "samsung,s3c6410-rtc"; + reg = <0x10070000 0x100>; + interrupts = <0 73 0>, <0 74 0>; + status = "disabled"; + }; + + gic: interrupt-controller@10481000 { + compatible = "arm,cortex-a15-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x10481000 0x1000>, + <0x10482000 0x1000>, + <0x10484000 0x2000>, + <0x10486000 0x2000>; + interrupts = <1 9 0xf04>; + }; + + mct@10050000 { + compatible = "samsung,exynos4210-mct"; + reg = <0x10050000 0x800>; + interrupts = <0 218 0>, <0 219 0>, <0 220 0>, <0 221 0>, + <0 223 0>, <0 226 0>, <0 227 0>, <0 228 0>; + clocks = <&cmu CLK_FIN_PLL>, <&cmu CLK_MCT>; + clock-names = "fin_pll", "mct"; + }; + + pinctrl_1: pinctrl@11000000 { + compatible = "samsung,exynos3250-pinctrl"; + reg = <0x11000000 0x1000>; + interrupts = <0 225 0>; + + wakeup-interrupt-controller { + compatible = "samsung,exynos4210-wakeup-eint"; + interrupt-parent = <&gic>; + interrupts = <0 48 0>; + }; + }; + + pinctrl_0: pinctrl@11400000 { + compatible = "samsung,exynos3250-pinctrl"; + reg = <0x11400000 0x1000>; + interrupts = <0 240 0>; + }; + + mshc_0: mshc@12510000 { + compatible = "samsung,exynos5250-dw-mshc"; + reg = <0x12510000 0x1000>; + interrupts = <0 142 0>; + clocks = <&cmu CLK_SDMMC0>, <&cmu CLK_SCLK_MMC0>; + clock-names = "biu", "ciu"; + fifo-depth = <0x80>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + mshc_1: mshc@12520000 { + compatible = "samsung,exynos5250-dw-mshc"; + reg = <0x12520000 0x1000>; + interrupts = <0 143 0>; + clocks = <&cmu CLK_SDMMC1>, <&cmu CLK_SCLK_MMC1>; + clock-names = "biu", "ciu"; + fifo-depth = <0x80>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + amba { + compatible = "arm,amba-bus"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&gic>; + ranges; + + pdma0: pdma@12680000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x12680000 0x1000>; + interrupts = <0 138 0>; + clocks = <&cmu CLK_PDMA0>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + }; + + pdma1: pdma@12690000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x12690000 0x1000>; + interrupts = <0 139 0>; + clocks = <&cmu CLK_PDMA1>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + }; + }; + + adc: adc@126C0000 { + compatible = "samsung,exynos-adc-v3"; + reg = <0x126C0000 0x100>, <0x10020718 0x4>; + interrupts = <0 137 0>; + clock-names = "adc", "sclk_tsadc"; + clocks = <&cmu CLK_TSADC>, <&cmu CLK_SCLK_TSADC>; + #io-channel-cells = <1>; + io-channel-ranges; + status = "disabled"; + }; + + serial_0: serial@13800000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x13800000 0x100>; + interrupts = <0 109 0>; + clocks = <&cmu CLK_UART0>, <&cmu CLK_SCLK_UART0>; + clock-names = "uart", "clk_uart_baud0"; + status = "disabled"; + }; + + serial_1: serial@13810000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x13810000 0x100>; + interrupts = <0 110 0>; + clocks = <&cmu CLK_UART1>, <&cmu CLK_SCLK_UART1>; + clock-names = "uart", "clk_uart_baud0"; + status = "disabled"; + }; + + i2c_0: i2c@13860000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-i2c"; + reg = <0x13860000 0x100>; + interrupts = <0 113 0>; + clocks = <&cmu CLK_I2C0>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_bus>; + status = "disabled"; + }; + + i2c_1: i2c@13870000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-i2c"; + reg = <0x13870000 0x100>; + interrupts = <0 114 0>; + clocks = <&cmu CLK_I2C1>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_bus>; + status = "disabled"; + }; + + i2c_2: i2c@13880000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-i2c"; + reg = <0x13880000 0x100>; + interrupts = <0 115 0>; + clocks = <&cmu CLK_I2C2>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_bus>; + status = "disabled"; + }; + + i2c_3: i2c@13890000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-i2c"; + reg = <0x13890000 0x100>; + interrupts = <0 116 0>; + clocks = <&cmu CLK_I2C3>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_bus>; + status = "disabled"; + }; + + i2c_4: i2c@138A0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-i2c"; + reg = <0x138A0000 0x100>; + interrupts = <0 117 0>; + clocks = <&cmu CLK_I2C4>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_bus>; + status = "disabled"; + }; + + i2c_5: i2c@138B0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-i2c"; + reg = <0x138B0000 0x100>; + interrupts = <0 118 0>; + clocks = <&cmu CLK_I2C5>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c5_bus>; + status = "disabled"; + }; + + i2c_6: i2c@138C0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-i2c"; + reg = <0x138C0000 0x100>; + interrupts = <0 119 0>; + clocks = <&cmu CLK_I2C6>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c6_bus>; + status = "disabled"; + }; + + i2c_7: i2c@138D0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-i2c"; + reg = <0x138D0000 0x100>; + interrupts = <0 120 0>; + clocks = <&cmu CLK_I2C7>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c7_bus>; + status = "disabled"; + }; + + spi_0: spi@13920000 { + compatible = "samsung,exynos4210-spi"; + reg = <0x13920000 0x100>; + interrupts = <0 121 0>; + dmas = <&pdma0 7>, <&pdma0 6>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cmu CLK_SPI0>, <&cmu CLK_SCLK_SPI0>; + clock-names = "spi", "spi_busclk0"; + samsung,spi-src-clk = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_bus>; + status = "disabled"; + }; + + spi_1: spi@13930000 { + compatible = "samsung,exynos4210-spi"; + reg = <0x13930000 0x100>; + interrupts = <0 122 0>; + dmas = <&pdma1 7>, <&pdma1 6>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cmu CLK_SPI1>, <&cmu CLK_SCLK_SPI1>; + clock-names = "spi", "spi_busclk0"; + samsung,spi-src-clk = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&spi1_bus>; + status = "disabled"; + }; + + pwm: pwm@139D0000 { + compatible = "samsung,exynos4210-pwm"; + reg = <0x139D0000 0x1000>; + interrupts = <0 104 0>, <0 105 0>, <0 106 0>, + <0 107 0>, <0 108 0>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pmu { + compatible = "arm,cortex-a7-pmu"; + interrupts = <0 18 0>, <0 19 0>; + }; + }; +}; + +#include "exynos3250-pinctrl.dtsi" diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index 58ff8e28c74f..b8ece4be41ca 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -20,6 +20,7 @@ */ #include <dt-bindings/clock/exynos4.h> +#include <dt-bindings/clock/exynos-audss-clk.h> #include "skeleton.dtsi" / { @@ -45,6 +46,23 @@ fimc3 = &fimc_3; }; + clock_audss: clock-controller@03810000 { + compatible = "samsung,exynos4210-audss-clock"; + reg = <0x03810000 0x0C>; + #clock-cells = <1>; + }; + + i2s0: i2s@03830000 { + compatible = "samsung,s5pv210-i2s"; + reg = <0x03830000 0x100>; + clocks = <&clock_audss EXYNOS_I2S_BUS>; + clock-names = "iis"; + dmas = <&pdma0 12>, <&pdma0 11>, <&pdma0 10>; + dma-names = "tx", "rx", "tx-sec"; + samsung,idma-addr = <0x03000000>; + status = "disabled"; + }; + chipid@10000000 { compatible = "samsung,exynos4210-chipid"; reg = <0x10000000 0x100>; @@ -110,6 +128,11 @@ reg = <0x10010000 0x400>; }; + pmu_system_controller: system-controller@10020000 { + compatible = "samsung,exynos4210-pmu", "syscon"; + reg = <0x10020000 0x4000>; + }; + dsi_0: dsi@11C80000 { compatible = "samsung,exynos4210-mipi-dsi"; reg = <0x11C80000 0x10000>; @@ -117,7 +140,7 @@ samsung,power-domain = <&pd_lcd0>; phys = <&mipi_phy 1>; phy-names = "dsim"; - clocks = <&clock 286>, <&clock 143>; + clocks = <&clock CLK_DSIM0>, <&clock CLK_SCLK_MIPI0>; clock-names = "bus_clk", "pll_clk"; status = "disabled"; #address-cells = <1>; @@ -271,6 +294,27 @@ status = "disabled"; }; + exynos_usbphy: exynos-usbphy@125B0000 { + compatible = "samsung,exynos4210-usb2-phy"; + reg = <0x125B0000 0x100>; + samsung,pmureg-phandle = <&pmu_system_controller>; + clocks = <&clock CLK_USB_DEVICE>, <&clock CLK_XUSBXTI>; + clock-names = "phy", "ref"; + #phy-cells = <1>; + status = "disabled"; + }; + + hsotg@12480000 { + compatible = "samsung,s3c6400-hsotg"; + reg = <0x12480000 0x20000>; + interrupts = <0 71 0>; + clocks = <&clock CLK_USB_DEVICE>; + clock-names = "otg"; + phys = <&exynos_usbphy 0>; + phy-names = "usb2-phy"; + status = "disabled"; + }; + ehci@12580000 { compatible = "samsung,exynos4210-ehci"; reg = <0x12580000 0x100>; @@ -289,6 +333,26 @@ status = "disabled"; }; + i2s1: i2s@13960000 { + compatible = "samsung,s5pv210-i2s"; + reg = <0x13960000 0x100>; + clocks = <&clock CLK_I2S1>; + clock-names = "iis"; + dmas = <&pdma1 12>, <&pdma1 11>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + i2s2: i2s@13970000 { + compatible = "samsung,s5pv210-i2s"; + reg = <0x13970000 0x100>; + clocks = <&clock CLK_I2S2>; + clock-names = "iis"; + dmas = <&pdma0 14>, <&pdma0 13>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + mfc: codec@13400000 { compatible = "samsung,mfc-v5"; reg = <0x13400000 0x10000>; diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts index 72fb11f7ea21..f767c425d0b5 100644 --- a/arch/arm/boot/dts/exynos4210-origen.dts +++ b/arch/arm/boot/dts/exynos4210-origen.dts @@ -16,6 +16,7 @@ /dts-v1/; #include "exynos4210.dtsi" +#include <dt-bindings/input/input.h> / { model = "Insignal Origen evaluation board based on Exynos4210"; @@ -48,6 +49,14 @@ }; }; + watchdog@10060000 { + status = "okay"; + }; + + rtc@10070000 { + status = "okay"; + }; + tmu@100C0000 { status = "okay"; }; @@ -251,35 +260,35 @@ up { label = "Up"; gpios = <&gpx2 0 1>; - linux,code = <103>; + linux,code = <KEY_UP>; gpio-key,wakeup; }; down { label = "Down"; gpios = <&gpx2 1 1>; - linux,code = <108>; + linux,code = <KEY_DOWN>; gpio-key,wakeup; }; back { label = "Back"; gpios = <&gpx1 7 1>; - linux,code = <158>; + linux,code = <KEY_BACK>; gpio-key,wakeup; }; home { label = "Home"; gpios = <&gpx1 6 1>; - linux,code = <102>; + linux,code = <KEY_HOME>; gpio-key,wakeup; }; menu { label = "Menu"; gpios = <&gpx1 5 1>; - linux,code = <139>; + linux,code = <KEY_MENU>; gpio-key,wakeup; }; }; diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts index 63aa2bb24a4b..f516da9e8b3a 100644 --- a/arch/arm/boot/dts/exynos4210-trats.dts +++ b/arch/arm/boot/dts/exynos4210-trats.dts @@ -88,6 +88,12 @@ }; }; + hsotg@12480000 { + vusb_d-supply = <&vusb_reg>; + vusb_a-supply = <&vusbdac_reg>; + status = "okay"; + }; + sdhci_emmc: sdhci@12510000 { bus-width = <8>; non-removable; @@ -97,6 +103,10 @@ status = "okay"; }; + exynos-usbphy@125B0000 { + status = "okay"; + }; + serial@13800000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts index 9296dee10e26..d50eb3aa708e 100644 --- a/arch/arm/boot/dts/exynos4210-universal_c210.dts +++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts @@ -68,6 +68,12 @@ enable-active-high; }; + hsotg@12480000 { + vusb_d-supply = <&ldo3_reg>; + vusb_a-supply = <&ldo8_reg>; + status = "okay"; + }; + sdhci_emmc: sdhci@12510000 { bus-width = <8>; non-removable; @@ -77,6 +83,34 @@ status = "okay"; }; + sdhci_sd: sdhci@12530000 { + bus-width = <4>; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>; + pinctrl-names = "default"; + vmmc-supply = <&ldo5_reg>; + cd-gpios = <&gpx3 4 0>; + cd-inverted; + status = "okay"; + }; + + ehci@12580000 { + status = "okay"; + port@0 { + status = "okay"; + }; + }; + + ohci@12590000 { + status = "okay"; + port@0 { + status = "okay"; + }; + }; + + exynos-usbphy@125B0000 { + status = "okay"; + }; + serial@13800000 { status = "okay"; }; @@ -216,6 +250,7 @@ regulator-name = "VUSB+MIPI_1.1V"; regulator-min-microvolt = <1100000>; regulator-max-microvolt = <1100000>; + regulator-always-on; }; ldo4_reg: LDO4 { @@ -246,6 +281,7 @@ regulator-name = "VUSB+VDAC_3.3V"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + regulator-always-on; }; ldo9_reg: LDO9 { @@ -428,6 +464,29 @@ compatible = "samsung,s5p6440-pwm"; status = "okay"; }; + + camera { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <>; + + fimc_0: fimc@11800000 { + status = "okay"; + }; + + fimc_1: fimc@11810000 { + status = "okay"; + }; + + fimc_2: fimc@11820000 { + status = "okay"; + }; + + fimc_3: fimc@11830000 { + status = "okay"; + }; + }; }; &mdma1 { diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts index e2c0dcab4d81..e925c9fbfb07 100644 --- a/arch/arm/boot/dts/exynos4412-origen.dts +++ b/arch/arm/boot/dts/exynos4412-origen.dts @@ -14,6 +14,7 @@ /dts-v1/; #include "exynos4412.dtsi" +#include <dt-bindings/input/input.h> / { model = "Insignal Origen evaluation board based on Exynos4412"; @@ -48,6 +49,14 @@ }; }; + watchdog@10060000 { + status = "okay"; + }; + + rtc@10070000 { + status = "okay"; + }; + pinctrl@11000000 { keypad_rows: keypad-rows { samsung,pins = "gpx2-0", "gpx2-1", "gpx2-2"; @@ -76,37 +85,37 @@ key_home { keypad,row = <0>; keypad,column = <0>; - linux,code = <102>; + linux,code = <KEY_HOME>; }; key_down { keypad,row = <0>; keypad,column = <1>; - linux,code = <108>; + linux,code = <KEY_DOWN>; }; key_up { keypad,row = <1>; keypad,column = <0>; - linux,code = <103>; + linux,code = <KEY_UP>; }; key_menu { keypad,row = <1>; keypad,column = <1>; - linux,code = <139>; + linux,code = <KEY_MENU>; }; key_back { keypad,row = <2>; keypad,column = <0>; - linux,code = <158>; + linux,code = <KEY_BACK>; }; key_enter { keypad,row = <2>; keypad,column = <1>; - linux,code = <28>; + linux,code = <KEY_ENTER>; }; }; diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts index bc08e6ef3d4f..77878447b312 100644 --- a/arch/arm/boot/dts/exynos4412-trats2.dts +++ b/arch/arm/boot/dts/exynos4412-trats2.dts @@ -21,6 +21,7 @@ aliases { i2c9 = &i2c_ak8975; + i2c10 = &i2c_cm36651; }; memory { @@ -98,38 +99,49 @@ enable-active-high; regulator-always-on; }; + + ps_als_reg: voltage-regulator-5 { + compatible = "regulator-fixed"; + regulator-name = "LED_A_3.0V"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + gpio = <&gpj0 5 0>; + enable-active-high; + }; }; gpio-keys { compatible = "gpio-keys"; key-down { - interrupt-parent = <&gpj1>; - interrupts = <2 0>; - gpios = <&gpj1 2 1>; + gpios = <&gpx3 3 1>; linux,code = <114>; label = "volume down"; debounce-interval = <10>; }; key-up { - interrupt-parent = <&gpj1>; - interrupts = <1 0>; - gpios = <&gpj1 1 1>; + gpios = <&gpx2 2 1>; linux,code = <115>; label = "volume up"; debounce-interval = <10>; }; key-power { - interrupt-parent = <&gpx2>; - interrupts = <7 0>; gpios = <&gpx2 7 1>; linux,code = <116>; label = "power"; debounce-interval = <10>; gpio-key,wakeup; }; + + key-ok { + gpios = <&gpx0 1 1>; + linux,code = <139>; + label = "ok"; + debounce-inteval = <10>; + gpio-key,wakeup; + }; }; adc: adc@126C0000 { @@ -558,6 +570,22 @@ }; }; + i2c_cm36651: i2c-gpio-2 { + compatible = "i2c-gpio"; + gpios = <&gpf0 0 1>, <&gpf0 1 1>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + + cm36651@18 { + compatible = "capella,cm36651"; + reg = <0x18>; + interrupt-parent = <&gpx0>; + interrupts = <2 2>; + vled-supply = <&ps_als_reg>; + }; + }; + spi_1: spi@13930000 { pinctrl-names = "default"; pinctrl-0 = <&spi1_bus>; @@ -732,6 +760,16 @@ }; }; + exynos-usbphy@125B0000 { + status = "okay"; + }; + + hsotg@12480000 { + vusb_d-supply = <&ldo15_reg>; + vusb_a-supply = <&ldo12_reg>; + status = "okay"; + }; + thermistor-ap@0 { compatible = "ntc,ncp15wb473"; pullup-uv = <1800000>; /* VCC_1.8V_AP */ diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi index 15d3c0ac2f5f..c42a3e196cd5 100644 --- a/arch/arm/boot/dts/exynos4412.dtsi +++ b/arch/arm/boot/dts/exynos4412.dtsi @@ -29,4 +29,8 @@ gic: interrupt-controller@10490000 { cpu-offset = <0x4000>; }; + + pmu_system_controller: system-controller@10020000 { + compatible = "samsung,exynos4412-pmu", "syscon"; + }; }; diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi index 70e3765b51ee..c5a943df1cd7 100644 --- a/arch/arm/boot/dts/exynos4x12.dtsi +++ b/arch/arm/boot/dts/exynos4x12.dtsi @@ -137,6 +137,10 @@ interrupts = <0 72 0>; }; + pmu_system_controller: system-controller@10020000 { + compatible = "samsung,exynos4212-pmu", "syscon"; + }; + g2d@10800000 { compatible = "samsung,exynos4212-g2d"; reg = <0x10800000 0x1000>; @@ -261,4 +265,9 @@ clock-names = "biu", "ciu"; status = "disabled"; }; + + exynos-usbphy@125B0000 { + compatible = "samsung,exynos4x12-usb2-phy"; + samsung,sysreg-phandle = <&sys_reg>; + }; }; diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts index cde19c818667..d0de1f50d15b 100644 --- a/arch/arm/boot/dts/exynos5250-arndale.dts +++ b/arch/arm/boot/dts/exynos5250-arndale.dts @@ -12,6 +12,7 @@ /dts-v1/; #include "exynos5250.dtsi" #include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/input/input.h> / { model = "Insignal Arndale evaluation board based on EXYNOS5250"; @@ -445,42 +446,42 @@ menu { label = "SW-TACT2"; gpios = <&gpx1 4 1>; - linux,code = <139>; + linux,code = <KEY_MENU>; gpio-key,wakeup; }; home { label = "SW-TACT3"; gpios = <&gpx1 5 1>; - linux,code = <102>; + linux,code = <KEY_HOME>; gpio-key,wakeup; }; up { label = "SW-TACT4"; gpios = <&gpx1 6 1>; - linux,code = <103>; + linux,code = <KEY_UP>; gpio-key,wakeup; }; down { label = "SW-TACT5"; gpios = <&gpx1 7 1>; - linux,code = <108>; + linux,code = <KEY_DOWN>; gpio-key,wakeup; }; back { label = "SW-TACT6"; gpios = <&gpx2 0 1>; - linux,code = <158>; + linux,code = <KEY_BACK>; gpio-key,wakeup; }; wakeup { label = "SW-TACT7"; gpios = <&gpx2 1 1>; - linux,code = <143>; + linux,code = <KEY_WAKEUP>; gpio-key,wakeup; }; }; diff --git a/arch/arm/boot/dts/exynos5250-cros-common.dtsi b/arch/arm/boot/dts/exynos5250-cros-common.dtsi index 2c1560d52f1a..89ac90f59e2e 100644 --- a/arch/arm/boot/dts/exynos5250-cros-common.dtsi +++ b/arch/arm/boot/dts/exynos5250-cros-common.dtsi @@ -240,7 +240,7 @@ samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <378000>; - hdmiphy@38 { + hdmiphy: hdmiphy@38 { compatible = "samsung,exynos4212-hdmiphy"; reg = <0x38>; }; @@ -304,6 +304,10 @@ hdmi { hpd-gpio = <&gpx3 7 0>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_hpd_irq>; + phy = <&hdmiphy>; + ddc = <&i2c_2>; }; gpio-keys { diff --git a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi index 9a49e6804ae1..886cfca044ac 100644 --- a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi @@ -351,6 +351,34 @@ samsung,pin-drv = <0>; }; + pwm0_out: pwm0-out { + samsung,pins = "gpb2-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pwm1_out: pwm1-out { + samsung,pins = "gpb2-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pwm2_out: pwm2-out { + samsung,pins = "gpb2-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pwm3_out: pwm3-out { + samsung,pins = "gpb2-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + i2c7_bus: i2c7-bus { samsung,pins = "gpb2-2", "gpb2-3"; samsung,pin-function = <3>; diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts index 1ce1088a00fb..079fdf9e3f18 100644 --- a/arch/arm/boot/dts/exynos5250-snow.dts +++ b/arch/arm/boot/dts/exynos5250-snow.dts @@ -25,6 +25,13 @@ }; pinctrl@11400000 { + ec_irq: ec-irq { + samsung,pins = "gpx1-6"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + sd3_clk: sd3-clk { samsung,pin-drv = <0>; }; @@ -37,6 +44,50 @@ sd3_bus4: sd3-bus-width4 { samsung,pin-drv = <0>; }; + + max98095_en: max98095-en { + samsung,pins = "gpx1-7"; + samsung,pin-function = <0>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + tps65090_irq: tps65090-irq { + samsung,pins = "gpx2-6"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + usb3_vbus_en: usb3-vbus-en { + samsung,pins = "gpx2-7"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + hdmi_hpd_irq: hdmi-hpd-irq { + samsung,pins = "gpx3-7"; + samsung,pin-function = <0>; + samsung,pin-pud = <1>; + samsung,pin-drv = <0>; + }; + }; + + pinctrl@13400000 { + arb_their_claim: arb-their-claim { + samsung,pins = "gpe0-4"; + samsung,pin-function = <0>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + arb_our_claim: arb-our-claim { + samsung,pins = "gpf0-3"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; }; gpio-keys { @@ -52,6 +103,12 @@ }; }; + vbat: vbat-fixed-regulator { + compatible = "regulator-fixed"; + regulator-name = "vbat-supply"; + regulator-boot-on; + }; + i2c-arbitrator { compatible = "i2c-arb-gpio-challenge"; #address-cells = <1>; @@ -65,6 +122,9 @@ wait-retry-us = <3000>; wait-free-us = <50000>; + pinctrl-names = "default"; + pinctrl-0 = <&arb_our_claim &arb_their_claim>; + /* Use ID 104 as a hint that we're on physical bus 4 */ i2c_104: i2c@0 { reg = <0>; @@ -82,6 +142,8 @@ reg = <0x1e>; interrupts = <6 0>; interrupt-parent = <&gpx1>; + pinctrl-names = "default"; + pinctrl-0 = <&ec_irq>; wakeup-source; keyboard-controller { @@ -173,6 +235,83 @@ 0x070c0069>; /* LEFT */ }; }; + + power-regulator { + compatible = "ti,tps65090"; + reg = <0x48>; + + /* + * Config irq to disable internal pulls + * even though we run in polling mode. + */ + pinctrl-names = "default"; + pinctrl-0 = <&tps65090_irq>; + + vsys1-supply = <&vbat>; + vsys2-supply = <&vbat>; + vsys3-supply = <&vbat>; + infet1-supply = <&vbat>; + infet2-supply = <&vbat>; + infet3-supply = <&vbat>; + infet4-supply = <&vbat>; + infet5-supply = <&vbat>; + infet6-supply = <&vbat>; + infet7-supply = <&vbat>; + vsys-l1-supply = <&vbat>; + vsys-l2-supply = <&vbat>; + + regulators { + dcdc1 { + ti,enable-ext-control; + }; + dcdc2 { + ti,enable-ext-control; + }; + dcdc3 { + ti,enable-ext-control; + }; + fet1 { + regulator-name = "vcd_led"; + ti,overcurrent-wait = <3>; + }; + tps65090_fet2: fet2 { + regulator-name = "video_mid"; + regulator-always-on; + ti,overcurrent-wait = <3>; + }; + fet3 { + regulator-name = "wwan_r"; + regulator-always-on; + ti,overcurrent-wait = <3>; + }; + fet4 { + regulator-name = "sdcard"; + ti,overcurrent-wait = <3>; + }; + fet5 { + regulator-name = "camout"; + regulator-always-on; + ti,overcurrent-wait = <3>; + }; + fet6 { + regulator-name = "lcd_vdd"; + ti,overcurrent-wait = <3>; + }; + tps65090_fet7: fet7 { + regulator-name = "video_mid_1a"; + regulator-always-on; + ti,overcurrent-wait = <3>; + }; + ldo1 { + }; + ldo2 { + }; + }; + + charger { + compatible = "ti,tps65090-charger"; + }; + }; }; }; @@ -196,6 +335,41 @@ }; }; + i2c@12CD0000 { + max98095: codec@11 { + compatible = "maxim,max98095"; + reg = <0x11>; + pinctrl-0 = <&max98095_en>; + pinctrl-names = "default"; + }; + }; + + i2s0: i2s@03830000 { + status = "okay"; + }; + + sound { + compatible = "google,snow-audio-max98095"; + + samsung,i2s-controller = <&i2s0>; + samsung,audio-codec = <&max98095>; + }; + + usb3_vbus_reg: regulator-usb3 { + compatible = "regulator-fixed"; + regulator-name = "P5.0V_USB3CON"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpx2 7 0>; + pinctrl-names = "default"; + pinctrl-0 = <&usb3_vbus_en>; + enable-active-high; + }; + + phy@12100000 { + vbus-supply = <&usb3_vbus_reg>; + }; + usb@12110000 { samsung,vbus-gpio = <&gpx1 1 0>; }; @@ -206,4 +380,54 @@ clock-frequency = <24000000>; }; }; + + hdmi { + hdmi-en-supply = <&tps65090_fet7>; + vdd-supply = <&ldo8_reg>; + vdd_osc-supply = <&ldo10_reg>; + vdd_pll-supply = <&ldo8_reg>; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 0 1000000 0>; + brightness-levels = <0 100 500 1000 1500 2000 2500 2800>; + default-brightness-level = <7>; + pinctrl-0 = <&pwm0_out>; + pinctrl-names = "default"; + }; + + fimd@14400000 { + status = "okay"; + samsung,invert-vclk; + }; + + dp-controller@145B0000 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&dp_hpd>; + samsung,color-space = <0>; + samsung,dynamic-range = <0>; + samsung,ycbcr-coeff = <0>; + samsung,color-depth = <1>; + samsung,link-rate = <0x0a>; + samsung,lane-count = <2>; + samsung,hpd-gpio = <&gpx0 7 0>; + + display-timings { + native-mode = <&timing1>; + + timing1: timing@1 { + clock-frequency = <70589280>; + hactive = <1366>; + vactive = <768>; + hfront-porch = <40>; + hback-porch = <40>; + hsync-len = <32>; + vback-porch = <10>; + vfront-porch = <12>; + vsync-len = <6>; + }; + }; + }; }; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index e44693e2cfda..834fb5a5306f 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -193,6 +193,11 @@ reg = <0x10040000 0x5000>; }; + sysreg_system_controller: syscon@10050000 { + compatible = "samsung,exynos5-sysreg", "syscon"; + reg = <0x10050000 0x5000>; + }; + watchdog@101D0000 { compatible = "samsung,exynos5250-wdt"; reg = <0x101D0000 0x100>; @@ -268,7 +273,7 @@ sata_phy: sata-phy@12170000 { compatible = "samsung,exynos5250-sata-phy"; reg = <0x12170000 0x1ff>; - clocks = <&clock 287>; + clocks = <&clock CLK_SATA_PHYCTRL>; clock-names = "sata_phyctrl"; #phy-cells = <0>; samsung,syscon-phandle = <&pmu_system_controller>; @@ -551,22 +556,18 @@ compatible = "synopsys,dwc3"; reg = <0x12000000 0x10000>; interrupts = <0 72 0>; - usb-phy = <&usb2_phy &usb3_phy>; + phys = <&usbdrd_phy 0>, <&usbdrd_phy 1>; + phy-names = "usb2-phy", "usb3-phy"; }; }; - usb3_phy: usbphy@12100000 { - compatible = "samsung,exynos5250-usb3phy"; + usbdrd_phy: phy@12100000 { + compatible = "samsung,exynos5250-usbdrd-phy"; reg = <0x12100000 0x100>; - clocks = <&clock CLK_FIN_PLL>, <&clock CLK_USB3>; - clock-names = "ext_xtal", "usbdrd30"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - usbphy-sys { - reg = <0x10040704 0x8>; - }; + clocks = <&clock CLK_USB3>, <&clock CLK_FIN_PLL>; + clock-names = "phy", "ref"; + samsung,pmu-syscon = <&pmu_system_controller>; + #phy-cells = <1>; }; usb@12110000 { @@ -576,6 +577,12 @@ clocks = <&clock CLK_USB2>; clock-names = "usbhost"; + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + phys = <&usb2_phy_gen 1>; + }; }; usb@12120000 { @@ -585,6 +592,12 @@ clocks = <&clock CLK_USB2>; clock-names = "usbhost"; + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + phys = <&usb2_phy_gen 1>; + }; }; usb2_phy: usbphy@12130000 { @@ -602,6 +615,16 @@ }; }; + usb2_phy_gen: phy@12130000 { + compatible = "samsung,exynos5250-usb2-phy"; + reg = <0x12130000 0x100>; + clocks = <&clock CLK_USB2>, <&clock CLK_FIN_PLL>; + clock-names = "phy", "ref"; + #phy-cells = <1>; + samsung,sysreg-phandle = <&sysreg_system_controller>; + samsung,pmureg-phandle = <&pmu_system_controller>; + }; + pwm: pwm@12dd0000 { compatible = "samsung,exynos4210-pwm"; reg = <0x12dd0000 0x100>; @@ -708,6 +731,7 @@ <&clock CLK_MOUT_HDMI>; clock-names = "hdmi", "sclk_hdmi", "sclk_pixel", "sclk_hdmiphy", "mout_hdmi"; + samsung,syscon-phandle = <&pmu_system_controller>; }; mixer { @@ -751,7 +775,7 @@ compatible = "samsung,exynos4210-secss"; reg = <0x10830000 0x10000>; interrupts = <0 112 0>; - clocks = <&clock 348>; + clocks = <&clock CLK_SSS>; clock-names = "secss"; }; }; diff --git a/arch/arm/boot/dts/exynos5260-pinctrl.dtsi b/arch/arm/boot/dts/exynos5260-pinctrl.dtsi new file mode 100644 index 000000000000..f6ee55ea0708 --- /dev/null +++ b/arch/arm/boot/dts/exynos5260-pinctrl.dtsi @@ -0,0 +1,574 @@ +/* + * Samsung's Exynos5260 SoC pin-mux and pin-config device tree source + * + * Copyright (c) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Samsung's Exynos5260 SoC pin-mux and pin-config options are listed as device + * tree nodes are listed in this file. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#define PIN_PULL_NONE 0 +#define PIN_PULL_DOWN 1 +#define PIN_PULL_UP 3 + +&pinctrl_0 { + gpa0: gpa0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpa1: gpa1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpa2: gpa2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb0: gpb0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb1: gpb1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb2: gpb2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb3: gpb3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb4: gpb4 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb5: gpb5 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd0: gpd0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd1: gpd1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd2: gpd2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpe0: gpe0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpe1: gpe1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf0: gpf0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf1: gpf1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpk0: gpk0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpx0: gpx0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpx1: gpx1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpx2: gpx2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpx3: gpx3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + uart0_data: uart0-data { + samsung,pins = "gpa0-0", "gpa0-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + samsung,pin-drv = <0>; + }; + + uart0_fctl: uart0-fctl { + samsung,pins = "gpa0-2", "gpa0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + samsung,pin-drv = <0>; + }; + + uart1_data: uart1-data { + samsung,pins = "gpa1-0", "gpa1-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + samsung,pin-drv = <0>; + }; + + uart1_fctl: uart1-fctl { + samsung,pins = "gpa1-2", "gpa1-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + samsung,pin-drv = <0>; + }; + + uart2_data: uart2-data { + samsung,pins = "gpa1-4", "gpa1-5"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + samsung,pin-drv = <0>; + }; + + spi0_bus: spi0-bus { + samsung,pins = "gpa2-0", "gpa2-2", "gpa2-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <0>; + }; + + spi1_bus: spi1-bus { + samsung,pins = "gpa2-4", "gpa2-6", "gpa2-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <0>; + }; + + usb3_vbus0_en: usb3-vbus0-en { + samsung,pins = "gpa2-4"; + samsung,pin-function = <1>; + samsung,pin-pud = <PIN_PULL_NONE>; + samsung,pin-drv = <0>; + }; + + i2s1_bus: i2s1-bus { + samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3", + "gpb0-4"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + samsung,pin-drv = <0>; + }; + + pcm1_bus: pcm1-bus { + samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3", + "gpb0-4"; + samsung,pin-function = <3>; + samsung,pin-pud = <PIN_PULL_NONE>; + samsung,pin-drv = <0>; + }; + + spdif1_bus: spdif1-bus { + samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2"; + samsung,pin-function = <4>; + samsung,pin-pud = <PIN_PULL_NONE>; + samsung,pin-drv = <0>; + }; + + spi2_bus: spi2-bus { + samsung,pins = "gpb1-0", "gpb1-2", "gpb1-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <0>; + }; + + i2c0_hs_bus: i2c0-hs-bus { + samsung,pins = "gpb3-0", "gpb3-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <0>; + }; + + i2c1_hs_bus: i2c1-hs-bus { + samsung,pins = "gpb3-2", "gpb3-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <0>; + }; + + i2c2_hs_bus: i2c2-hs-bus { + samsung,pins = "gpb3-4", "gpb3-5"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <0>; + }; + + i2c3_hs_bus: i2c3-hs-bus { + samsung,pins = "gpb3-6", "gpb3-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <0>; + }; + + i2c4_bus: i2c4-bus { + samsung,pins = "gpb4-0", "gpb4-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <0>; + }; + + i2c5_bus: i2c5-bus { + samsung,pins = "gpb4-2", "gpb4-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <0>; + }; + + i2c6_bus: i2c6-bus { + samsung,pins = "gpb4-4", "gpb4-5"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <0>; + }; + + i2c7_bus: i2c7-bus { + samsung,pins = "gpb4-6", "gpb4-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <0>; + }; + + i2c8_bus: i2c8-bus { + samsung,pins = "gpb5-0", "gpb5-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <0>; + }; + + i2c9_bus: i2c9-bus { + samsung,pins = "gpb5-2", "gpb5-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <0>; + }; + + i2c10_bus: i2c10-bus { + samsung,pins = "gpb5-4", "gpb5-5"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <0>; + }; + + i2c11_bus: i2c11-bus { + samsung,pins = "gpb5-6", "gpb5-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <0>; + }; + + cam_gpio_a: cam-gpio-a { + samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3", + "gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7", + "gpe1-0", "gpe1-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + samsung,pin-drv = <0>; + }; + + cam_gpio_b: cam-gpio-b { + samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3", + "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <PIN_PULL_NONE>; + samsung,pin-drv = <0>; + }; + + cam_i2c1_bus: cam-i2c1-bus { + samsung,pins = "gpf0-2", "gpf0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <0>; + }; + + cam_i2c0_bus: cam-i2c0-bus { + samsung,pins = "gpf0-0", "gpf0-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <0>; + }; + + cam_spi0_bus: cam-spi0-bus { + samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + samsung,pin-drv = <0>; + }; + + cam_spi1_bus: cam-spi1-bus { + samsung,pins = "gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + samsung,pin-drv = <0>; + }; +}; + +&pinctrl_1 { + gpc0: gpc0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc1: gpc1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc2: gpc2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc3: gpc3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc4: gpc4 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + sd0_clk: sd0-clk { + samsung,pins = "gpc0-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + samsung,pin-drv = <3>; + }; + + sd0_cmd: sd0-cmd { + samsung,pins = "gpc0-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + samsung,pin-drv = <3>; + }; + + sd0_bus1: sd0-bus-width1 { + samsung,pins = "gpc0-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <3>; + }; + + sd0_bus4: sd0-bus-width4 { + samsung,pins = "gpc0-3", "gpc0-4", "gpc0-5"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <3>; + }; + + sd0_bus8: sd0-bus-width8 { + samsung,pins = "gpc3-0", "gpc3-1", "gpc3-2", "gpc3-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <3>; + }; + + sd0_rdqs: sd0-rdqs { + samsung,pins = "gpc0-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <3>; + }; + + sd1_clk: sd1-clk { + samsung,pins = "gpc1-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + samsung,pin-drv = <3>; + }; + + sd1_cmd: sd1-cmd { + samsung,pins = "gpc1-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + samsung,pin-drv = <3>; + }; + + sd1_bus1: sd1-bus-width1 { + samsung,pins = "gpc1-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <3>; + }; + + sd1_bus4: sd1-bus-width4 { + samsung,pins = "gpc1-3", "gpc1-4", "gpc1-5"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <3>; + }; + + sd1_bus8: sd1-bus-width8 { + samsung,pins = "gpc4-0", "gpc4-1", "gpc4-2", "gpc4-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <3>; + }; + + sd2_clk: sd2-clk { + samsung,pins = "gpc2-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + samsung,pin-drv = <3>; + }; + + sd2_cmd: sd2-cmd { + samsung,pins = "gpc2-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + samsung,pin-drv = <3>; + }; + + sd2_cd: sd2-cd { + samsung,pins = "gpc2-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <3>; + }; + + sd2_bus1: sd2-bus-width1 { + samsung,pins = "gpc2-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <3>; + }; + + sd2_bus4: sd2-bus-width4 { + samsung,pins = "gpc2-4", "gpc2-5", "gpc2-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <3>; + }; +}; + +&pinctrl_2 { + gpz0: gpz0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpz1: gpz1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; +}; diff --git a/arch/arm/boot/dts/exynos5260-xyref5260.dts b/arch/arm/boot/dts/exynos5260-xyref5260.dts new file mode 100644 index 000000000000..8c84ab27c19b --- /dev/null +++ b/arch/arm/boot/dts/exynos5260-xyref5260.dts @@ -0,0 +1,103 @@ +/* + * SAMSUNG XYREF5260 board device tree source + * + * Copyright (c) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/dts-v1/; +#include "exynos5260.dtsi" + +/ { + model = "SAMSUNG XYREF5260 board based on EXYNOS5260"; + compatible = "samsung,xyref5260", "samsung,exynos5260", "samsung,exynos5"; + + memory { + reg = <0x20000000 0x80000000>; + }; + + chosen { + bootargs = "console=ttySAC2,115200"; + }; + + fin_pll: xxti { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "fin_pll"; + #clock-cells = <0>; + }; + + xrtcxti: xrtcxti { + compatible = "fixed-clock"; + clock-frequency = <32768>; + clock-output-names = "xrtcxti"; + #clock-cells = <0>; + }; +}; + +&pinctrl_0 { + hdmi_hpd_irq: hdmi-hpd-irq { + samsung,pins = "gpx3-7"; + samsung,pin-function = <0>; + samsung,pin-pud = <1>; + samsung,pin-drv = <0>; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&mmc_0 { + status = "okay"; + num-slots = <1>; + broken-cd; + bypass-smu; + supports-highspeed; + supports-hs200-mode; /* 200 Mhz */ + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <0 4>; + samsung,dw-mshc-ddr-timing = <0 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd0_rdqs &sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>; + + slot@0 { + reg = <0>; + bus-width = <8>; + }; +}; + +&mmc_2 { + status = "okay"; + num-slots = <1>; + supports-highspeed; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>; + + slot@0 { + reg = <0>; + bus-width = <4>; + disable-wp; + }; +}; diff --git a/arch/arm/boot/dts/exynos5260.dtsi b/arch/arm/boot/dts/exynos5260.dtsi new file mode 100644 index 000000000000..5398a60207ca --- /dev/null +++ b/arch/arm/boot/dts/exynos5260.dtsi @@ -0,0 +1,304 @@ +/* + * SAMSUNG EXYNOS5260 SoC device tree source + * + * Copyright (c) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include "skeleton.dtsi" + +#include <dt-bindings/clock/exynos5260-clk.h> + +/ { + compatible = "samsung,exynos5260", "samsung,exynos5"; + interrupt-parent = <&gic>; + + aliases { + pinctrl0 = &pinctrl_0; + pinctrl1 = &pinctrl_1; + pinctrl2 = &pinctrl_2; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x0>; + cci-control-port = <&cci_control1>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x1>; + cci-control-port = <&cci_control1>; + }; + + cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x100>; + cci-control-port = <&cci_control0>; + }; + + cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x101>; + cci-control-port = <&cci_control0>; + }; + + cpu@102 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x102>; + cci-control-port = <&cci_control0>; + }; + + cpu@103 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x103>; + cci-control-port = <&cci_control0>; + }; + }; + + soc: soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clock_top: clock-controller@10010000 { + compatible = "samsung,exynos5260-clock-top"; + reg = <0x10010000 0x10000>; + #clock-cells = <1>; + }; + + clock_peri: clock-controller@10200000 { + compatible = "samsung,exynos5260-clock-peri"; + reg = <0x10200000 0x10000>; + #clock-cells = <1>; + }; + + clock_egl: clock-controller@10600000 { + compatible = "samsung,exynos5260-clock-egl"; + reg = <0x10600000 0x10000>; + #clock-cells = <1>; + }; + + clock_kfc: clock-controller@10700000 { + compatible = "samsung,exynos5260-clock-kfc"; + reg = <0x10700000 0x10000>; + #clock-cells = <1>; + }; + + clock_g2d: clock-controller@10A00000 { + compatible = "samsung,exynos5260-clock-g2d"; + reg = <0x10A00000 0x10000>; + #clock-cells = <1>; + }; + + clock_mif: clock-controller@10CE0000 { + compatible = "samsung,exynos5260-clock-mif"; + reg = <0x10CE0000 0x10000>; + #clock-cells = <1>; + }; + + clock_mfc: clock-controller@11090000 { + compatible = "samsung,exynos5260-clock-mfc"; + reg = <0x11090000 0x10000>; + #clock-cells = <1>; + }; + + clock_g3d: clock-controller@11830000 { + compatible = "samsung,exynos5260-clock-g3d"; + reg = <0x11830000 0x10000>; + #clock-cells = <1>; + }; + + clock_fsys: clock-controller@122E0000 { + compatible = "samsung,exynos5260-clock-fsys"; + reg = <0x122E0000 0x10000>; + #clock-cells = <1>; + }; + + clock_aud: clock-controller@128C0000 { + compatible = "samsung,exynos5260-clock-aud"; + reg = <0x128C0000 0x10000>; + #clock-cells = <1>; + }; + + clock_isp: clock-controller@133C0000 { + compatible = "samsung,exynos5260-clock-isp"; + reg = <0x133C0000 0x10000>; + #clock-cells = <1>; + }; + + clock_gscl: clock-controller@13F00000 { + compatible = "samsung,exynos5260-clock-gscl"; + reg = <0x13F00000 0x10000>; + #clock-cells = <1>; + }; + + clock_disp: clock-controller@14550000 { + compatible = "samsung,exynos5260-clock-disp"; + reg = <0x14550000 0x10000>; + #clock-cells = <1>; + }; + + gic: interrupt-controller@10481000 { + compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-controller; + reg = <0x10481000 0x1000>, + <0x10482000 0x1000>, + <0x10484000 0x2000>, + <0x10486000 0x2000>; + interrupts = <1 9 0xf04>; + }; + + chipid: chipid@10000000 { + compatible = "samsung,exynos4210-chipid"; + reg = <0x10000000 0x100>; + }; + + mct: mct@100B0000 { + compatible = "samsung,exynos4210-mct"; + reg = <0x100B0000 0x1000>; + clocks = <&fin_pll>, <&clock_peri PERI_CLK_MCT>; + clock-names = "fin_pll", "mct"; + interrupts = <0 104 0>, <0 105 0>, <0 106 0>, + <0 107 0>, <0 122 0>, <0 123 0>, + <0 124 0>, <0 125 0>, <0 126 0>, + <0 127 0>, <0 128 0>, <0 129 0>; + }; + + cci: cci@10F00000 { + compatible = "arm,cci-400"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x10F00000 0x1000>; + ranges = <0x0 0x10F00000 0x6000>; + + cci_control0: slave-if@4000 { + compatible = "arm,cci-400-ctrl-if"; + interface-type = "ace"; + reg = <0x4000 0x1000>; + }; + + cci_control1: slave-if@5000 { + compatible = "arm,cci-400-ctrl-if"; + interface-type = "ace"; + reg = <0x5000 0x1000>; + }; + }; + + pinctrl_0: pinctrl@11600000 { + compatible = "samsung,exynos5260-pinctrl"; + reg = <0x11600000 0x1000>; + interrupts = <0 79 0>; + + wakeup-interrupt-controller { + compatible = "samsung,exynos4210-wakeup-eint"; + interrupt-parent = <&gic>; + interrupts = <0 32 0>; + }; + }; + + pinctrl_1: pinctrl@12290000 { + compatible = "samsung,exynos5260-pinctrl"; + reg = <0x12290000 0x1000>; + interrupts = <0 157 0>; + }; + + pinctrl_2: pinctrl@128B0000 { + compatible = "samsung,exynos5260-pinctrl"; + reg = <0x128B0000 0x1000>; + interrupts = <0 243 0>; + }; + + uart0: serial@12C00000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x12C00000 0x100>; + interrupts = <0 146 0>; + clocks = <&clock_peri PERI_CLK_UART0>, <&clock_peri PERI_SCLK_UART0>; + clock-names = "uart", "clk_uart_baud0"; + status = "disabled"; + }; + + uart1: serial@12C10000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x12C10000 0x100>; + interrupts = <0 147 0>; + clocks = <&clock_peri PERI_CLK_UART1>, <&clock_peri PERI_SCLK_UART1>; + clock-names = "uart", "clk_uart_baud0"; + status = "disabled"; + }; + + uart2: serial@12C20000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x12C20000 0x100>; + interrupts = <0 148 0>; + clocks = <&clock_peri PERI_CLK_UART2>, <&clock_peri PERI_SCLK_UART2>; + clock-names = "uart", "clk_uart_baud0"; + status = "disabled"; + }; + + uart3: serial@12860000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x12860000 0x100>; + interrupts = <0 145 0>; + clocks = <&clock_aud AUD_CLK_AUD_UART>, <&clock_aud AUD_SCLK_AUD_UART>; + clock-names = "uart", "clk_uart_baud0"; + status = "disabled"; + }; + + mmc_0: mmc@12140000 { + compatible = "samsung,exynos5250-dw-mshc"; + reg = <0x12140000 0x2000>; + interrupts = <0 156 0>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clock_fsys FSYS_CLK_MMC0>, <&clock_top TOP_SCLK_MMC0>; + clock-names = "biu", "ciu"; + fifo-depth = <64>; + status = "disabled"; + }; + + mmc_1: mmc@12150000 { + compatible = "samsung,exynos5250-dw-mshc"; + reg = <0x12150000 0x2000>; + interrupts = <0 158 0>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clock_fsys FSYS_CLK_MMC1>, <&clock_top TOP_SCLK_MMC1>; + clock-names = "biu", "ciu"; + fifo-depth = <64>; + status = "disabled"; + }; + + mmc_2: mmc@12160000 { + compatible = "samsung,exynos5250-dw-mshc"; + reg = <0x12160000 0x2000>; + interrupts = <0 159 0>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clock_fsys FSYS_CLK_MMC2>, <&clock_top TOP_SCLK_MMC2>; + clock-names = "biu", "ciu"; + fifo-depth = <64>; + status = "disabled"; + }; + }; +}; + +#include "exynos5260-pinctrl.dtsi" diff --git a/arch/arm/boot/dts/exynos5410-smdk5410.dts b/arch/arm/boot/dts/exynos5410-smdk5410.dts new file mode 100644 index 000000000000..7275bbd6fc4b --- /dev/null +++ b/arch/arm/boot/dts/exynos5410-smdk5410.dts @@ -0,0 +1,82 @@ +/* + * SAMSUNG SMDK5410 board device tree source + * + * Copyright (c) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/dts-v1/; +#include "exynos5410.dtsi" +/ { + model = "Samsung SMDK5410 board based on EXYNOS5410"; + compatible = "samsung,smdk5410", "samsung,exynos5410", "samsung,exynos5"; + + memory { + reg = <0x40000000 0x80000000>; + }; + + chosen { + bootargs = "console=ttySAC2,115200"; + }; + + fin_pll: xxti { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "fin_pll"; + #clock-cells = <0>; + }; + + firmware@02037000 { + compatible = "samsung,secure-firmware"; + reg = <0x02037000 0x1000>; + }; + +}; + +&mmc_0 { + status = "okay"; + num-slots = <1>; + supports-highspeed; + broken-cd; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + + slot@0 { + reg = <0>; + bus-width = <8>; + }; +}; + +&mmc_2 { + status = "okay"; + num-slots = <1>; + supports-highspeed; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + + slot@0 { + reg = <0>; + bus-width = <4>; + disable-wp; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi new file mode 100644 index 000000000000..3839c26f467f --- /dev/null +++ b/arch/arm/boot/dts/exynos5410.dtsi @@ -0,0 +1,206 @@ +/* + * SAMSUNG EXYNOS5410 SoC device tree source + * + * Copyright (c) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * SAMSUNG EXYNOS5410 SoC device nodes are listed in this file. + * EXYNOS5410 based board files can include this file and provide + * values for board specfic bindings. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "skeleton.dtsi" +#include <dt-bindings/clock/exynos5410.h> + +/ { + compatible = "samsung,exynos5410", "samsung,exynos5"; + interrupt-parent = <&gic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x0>; + }; + + CPU1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x1>; + }; + + CPU2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x2>; + }; + + CPU3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x3>; + }; + }; + + soc: soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + combiner: interrupt-controller@10440000 { + compatible = "samsung,exynos4210-combiner"; + #interrupt-cells = <2>; + interrupt-controller; + samsung,combiner-nr = <32>; + reg = <0x10440000 0x1000>; + interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>, + <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>, + <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>, + <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>, + <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>, + <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>, + <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>, + <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>; + }; + + gic: interrupt-controller@10481000 { + compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x10481000 0x1000>, + <0x10482000 0x1000>, + <0x10484000 0x2000>, + <0x10486000 0x2000>; + interrupts = <1 9 0xf04>; + }; + + chipid@10000000 { + compatible = "samsung,exynos4210-chipid"; + reg = <0x10000000 0x100>; + }; + + mct: mct@101C0000 { + compatible = "samsung,exynos4210-mct"; + reg = <0x101C0000 0xB00>; + interrupt-parent = <&interrupt_map>; + interrupts = <0>, <1>, <2>, <3>, + <4>, <5>, <6>, <7>, + <8>, <9>, <10>, <11>; + clocks = <&fin_pll>, <&clock CLK_MCT>; + clock-names = "fin_pll", "mct"; + + interrupt_map: interrupt-map { + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = <0 &combiner 23 3>, + <1 &combiner 23 4>, + <2 &combiner 25 2>, + <3 &combiner 25 3>, + <4 &gic 0 120 0>, + <5 &gic 0 121 0>, + <6 &gic 0 122 0>, + <7 &gic 0 123 0>, + <8 &gic 0 128 0>, + <9 &gic 0 129 0>, + <10 &gic 0 130 0>, + <11 &gic 0 131 0>; + }; + }; + + sysram@02020000 { + compatible = "mmio-sram"; + reg = <0x02020000 0x54000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x02020000 0x54000>; + + smp-sysram@0 { + compatible = "samsung,exynos4210-sysram"; + reg = <0x0 0x1000>; + }; + + smp-sysram@53000 { + compatible = "samsung,exynos4210-sysram-ns"; + reg = <0x53000 0x1000>; + }; + }; + + clock: clock-controller@10010000 { + compatible = "samsung,exynos5410-clock"; + reg = <0x10010000 0x30000>; + #clock-cells = <1>; + }; + + mmc_0: mmc@12200000 { + compatible = "samsung,exynos5250-dw-mshc"; + reg = <0x12200000 0x1000>; + interrupts = <0 75 0>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clock CLK_MMC0>, <&clock CLK_SCLK_MMC0>; + clock-names = "biu", "ciu"; + fifo-depth = <0x80>; + status = "disabled"; + }; + + mmc_1: mmc@12210000 { + compatible = "samsung,exynos5250-dw-mshc"; + reg = <0x12210000 0x1000>; + interrupts = <0 76 0>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clock CLK_MMC1>, <&clock CLK_SCLK_MMC1>; + clock-names = "biu", "ciu"; + fifo-depth = <0x80>; + status = "disabled"; + }; + + mmc_2: mmc@12220000 { + compatible = "samsung,exynos5250-dw-mshc"; + reg = <0x12220000 0x1000>; + interrupts = <0 77 0>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clock CLK_MMC2>, <&clock CLK_SCLK_MMC2>; + clock-names = "biu", "ciu"; + fifo-depth = <0x80>; + status = "disabled"; + }; + + uart0: serial@12C00000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x12C00000 0x100>; + interrupts = <0 51 0>; + clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>; + clock-names = "uart", "clk_uart_baud0"; + status = "disabled"; + }; + + uart1: serial@12C10000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x12C10000 0x100>; + interrupts = <0 52 0>; + clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>; + clock-names = "uart", "clk_uart_baud0"; + status = "disabled"; + }; + + uart2: serial@12C20000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x12C20000 0x100>; + interrupts = <0 53 0>; + clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>; + clock-names = "uart", "clk_uart_baud0"; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts index 896a2a6619e0..434fd9d3e09d 100644 --- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts +++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts @@ -26,6 +26,11 @@ bootargs = "console=ttySAC3,115200"; }; + firmware@02073000 { + compatible = "samsung,secure-firmware"; + reg = <0x02073000 0x1000>; + }; + fixed-rate-clocks { oscclk { compatible = "samsung,exynos5420-oscclk"; @@ -37,6 +42,11 @@ status = "okay"; }; + codec@11000000 { + samsung,mfc-r = <0x43000000 0x800000>; + samsung,mfc-l = <0x51000000 0x800000>; + }; + mmc@12200000 { status = "okay"; broken-cd; diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts index fae33dddac39..1c5b8f9f4a36 100644 --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts @@ -58,9 +58,45 @@ pinctrl-0 = <&pwm0_out>; pinctrl-names = "default"; }; + + sound { + compatible = "google,snow-audio-max98090"; + + samsung,i2s-controller = <&i2s0>; + samsung,audio-codec = <&max98090>; + }; + + usb300_vbus_reg: regulator-usb300 { + compatible = "regulator-fixed"; + regulator-name = "P5.0V_USB3CON0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gph0 0 0>; + pinctrl-names = "default"; + pinctrl-0 = <&usb300_vbus_en>; + enable-active-high; + }; + + usb301_vbus_reg: regulator-usb301 { + compatible = "regulator-fixed"; + regulator-name = "P5.0V_USB3CON1"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gph0 1 0>; + pinctrl-names = "default"; + pinctrl-0 = <&usb301_vbus_en>; + enable-active-high; + }; }; &pinctrl_0 { + max98090_irq: max98090-irq { + samsung,pins = "gpx0-2"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + tpm_irq: tpm-irq { samsung,pins = "gpx1-0"; samsung,pin-function = <0>; @@ -74,6 +110,36 @@ samsung,pin-pud = <0>; samsung,pin-drv = <0>; }; + + hdmi_hpd_irq: hdmi-hpd-irq { + samsung,pins = "gpx3-7"; + samsung,pin-function = <0>; + samsung,pin-pud = <1>; + samsung,pin-drv = <0>; + }; + + dp_hpd_gpio: dp_hpd_gpio { + samsung,pins = "gpx2-6"; + samsung,pin-function = <0>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; +}; + +&pinctrl_3 { + usb300_vbus_en: usb300-vbus-en { + samsung,pins = "gph0-0"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + usb301_vbus_en: usb301-vbus-en { + samsung,pins = "gph0-1"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; }; &rtc { @@ -123,6 +189,19 @@ }; }; +&hsi2c_7 { + status = "okay"; + + max98090: codec@10 { + compatible = "maxim,max98090"; + reg = <0x10>; + interrupts = <2 0>; + interrupt-parent = <&gpx0>; + pinctrl-names = "default"; + pinctrl-0 = <&max98090_irq>; + }; +}; + &hsi2c_9 { status = "okay"; clock-frequency = <400000>; @@ -137,6 +216,29 @@ }; }; +&i2c_2 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; + samsung,i2c-slave-addr = <0x50>; +}; + +&hdmi { + status = "okay"; + hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_hpd_irq>; + ddc = <&i2c_2>; +}; + +&usbdrd_phy0 { + vbus-supply = <&usb300_vbus_reg>; +}; + +&usbdrd_phy1 { + vbus-supply = <&usb301_vbus_reg>; +}; + /* * Use longest HW watchdog in SoC (32 seconds) since the hardware * watchdog provides no debugging information (compared to soft/hard @@ -145,3 +247,41 @@ &watchdog { timeout-sec = <32>; }; + +&i2s0 { + status = "okay"; +}; + +&fimd { + status = "okay"; + samsung,invert-vclk; +}; + +&dp { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&dp_hpd_gpio>; + samsung,color-space = <0>; + samsung,dynamic-range = <0>; + samsung,ycbcr-coeff = <0>; + samsung,color-depth = <1>; + samsung,link-rate = <0x06>; + samsung,lane-count = <2>; + samsung,hpd-gpio = <&gpx2 6 0>; + + display-timings { + native-mode = <&timing1>; + + timing1: timing@1 { + clock-frequency = <70589280>; + hactive = <1366>; + vactive = <768>; + hfront-porch = <40>; + hback-porch = <40>; + hsync-len = <32>; + vback-porch = <10>; + vfront-porch = <12>; + vsync-len = <6>; + }; + }; +}; diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts index 69104850eb5e..6052aa9c5659 100644 --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts @@ -68,6 +68,11 @@ status = "okay"; }; + codec@11000000 { + samsung,mfc-r = <0x43000000 0x800000>; + samsung,mfc-l = <0x51000000 0x800000>; + }; + mmc@12200000 { status = "okay"; broken-cd; @@ -140,6 +145,22 @@ }; }; + pinctrl@14000000 { + usb300_vbus_en: usb300-vbus-en { + samsung,pins = "gpg0-5"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + usb301_vbus_en: usb301-vbus-en { + samsung,pins = "gpg1-4"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + }; + hdmi@14530000 { status = "okay"; hpd-gpio = <&gpx3 7 0>; @@ -147,6 +168,36 @@ pinctrl-0 = <&hdmi_hpd_irq>; }; + usb300_vbus_reg: regulator-usb300 { + compatible = "regulator-fixed"; + regulator-name = "VBUS0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpg0 5 0>; + pinctrl-names = "default"; + pinctrl-0 = <&usb300_vbus_en>; + enable-active-high; + }; + + usb301_vbus_reg: regulator-usb301 { + compatible = "regulator-fixed"; + regulator-name = "VBUS1"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpg1 4 0>; + pinctrl-names = "default"; + pinctrl-0 = <&usb301_vbus_en>; + enable-active-high; + }; + + phy@12100000 { + vbus-supply = <&usb300_vbus_reg>; + }; + + phy@12500000 { + vbus-supply = <&usb301_vbus_reg>; + }; + i2c_2: i2c@12C80000 { samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <66000>; diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index 5e36449a831c..e38532271ef9 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -47,6 +47,8 @@ spi0 = &spi_0; spi1 = &spi_1; spi2 = &spi_2; + usbdrdphy0 = &usbdrd_phy0; + usbdrdphy1 = &usbdrd_phy1; }; cpus { @@ -176,6 +178,7 @@ interrupts = <0 96 0>; clocks = <&clock CLK_MFC>; clock-names = "mfc"; + samsung,power-domain = <&mfc_pd>; }; mmc_0: mmc@12200000 { @@ -675,7 +678,7 @@ }; hdmi: hdmi@14530000 { - compatible = "samsung,exynos4212-hdmi"; + compatible = "samsung,exynos5420-hdmi"; reg = <0x14530000 0x70000>; interrupts = <0 95 0>; clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>, @@ -683,9 +686,15 @@ <&clock CLK_MOUT_HDMI>; clock-names = "hdmi", "sclk_hdmi", "sclk_pixel", "sclk_hdmiphy", "mout_hdmi"; + phy = <&hdmiphy>; + samsung,syscon-phandle = <&pmu_system_controller>; status = "disabled"; }; + hdmiphy: hdmiphy@145D0000 { + reg = <0x145D0000 0x20>; + }; + mixer: mixer@14450000 { compatible = "samsung,exynos5420-mixer"; reg = <0x14450000 0x10000>; @@ -717,6 +726,11 @@ reg = <0x10040000 0x5000>; }; + sysreg_system_controller: syscon@10050000 { + compatible = "samsung,exynos5-sysreg", "syscon"; + reg = <0x10050000 0x5000>; + }; + tmu_cpu0: tmu@10060000 { compatible = "samsung,exynos5420-tmu"; reg = <0x10060000 0x100>; @@ -770,7 +784,99 @@ compatible = "samsung,exynos4210-secss"; reg = <0x10830000 0x10000>; interrupts = <0 112 0>; - clocks = <&clock 471>; + clocks = <&clock CLK_SSS>; clock-names = "secss"; }; + + usbdrd3_0: usb@12000000 { + compatible = "samsung,exynos5250-dwusb3"; + clocks = <&clock CLK_USBD300>; + clock-names = "usbdrd30"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + dwc3 { + compatible = "snps,dwc3"; + reg = <0x12000000 0x10000>; + interrupts = <0 72 0>; + phys = <&usbdrd_phy0 0>, <&usbdrd_phy0 1>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + + usbdrd_phy0: phy@12100000 { + compatible = "samsung,exynos5420-usbdrd-phy"; + reg = <0x12100000 0x100>; + clocks = <&clock CLK_USBD300>, <&clock CLK_SCLK_USBPHY300>; + clock-names = "phy", "ref"; + samsung,pmu-syscon = <&pmu_system_controller>; + #phy-cells = <1>; + }; + + usbdrd3_1: usb@12400000 { + compatible = "samsung,exynos5250-dwusb3"; + clocks = <&clock CLK_USBD301>; + clock-names = "usbdrd30"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + dwc3 { + compatible = "snps,dwc3"; + reg = <0x12400000 0x10000>; + interrupts = <0 73 0>; + phys = <&usbdrd_phy1 0>, <&usbdrd_phy1 1>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + + usbdrd_phy1: phy@12500000 { + compatible = "samsung,exynos5420-usbdrd-phy"; + reg = <0x12500000 0x100>; + clocks = <&clock CLK_USBD301>, <&clock CLK_SCLK_USBPHY301>; + clock-names = "phy", "ref"; + samsung,pmu-syscon = <&pmu_system_controller>; + #phy-cells = <1>; + }; + + usbhost2: usb@12110000 { + compatible = "samsung,exynos4210-ehci"; + reg = <0x12110000 0x100>; + interrupts = <0 71 0>; + + clocks = <&clock CLK_USBH20>; + clock-names = "usbhost"; + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + phys = <&usb2_phy 1>; + }; + }; + + usbhost1: usb@12120000 { + compatible = "samsung,exynos4210-ohci"; + reg = <0x12120000 0x100>; + interrupts = <0 71 0>; + + clocks = <&clock CLK_USBH20>; + clock-names = "usbhost"; + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + phys = <&usb2_phy 1>; + }; + }; + + usb2_phy: phy@12130000 { + compatible = "samsung,exynos5250-usb2-phy"; + reg = <0x12130000 0x100>; + clocks = <&clock CLK_USBH20>, <&clock CLK_SCLK_USBPHY300>; + clock-names = "phy", "ref"; + #phy-cells = <1>; + samsung,sysreg-phandle = <&sysreg_system_controller>; + samsung,pmureg-phandle = <&pmu_system_controller>; + }; }; diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi index 84f77c2fe4d4..ae3a17c791f6 100644 --- a/arch/arm/boot/dts/exynos5440.dtsi +++ b/arch/arm/boot/dts/exynos5440.dtsi @@ -176,7 +176,7 @@ clock-names = "i2c"; }; - watchdog { + watchdog@110000 { compatible = "samsung,s3c2410-wdt"; reg = <0x110000 0x1000>; interrupts = <0 1 0>; diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts new file mode 100644 index 000000000000..f3af2079a063 --- /dev/null +++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts @@ -0,0 +1,253 @@ +/* + * Google Peach Pi Rev 10+ board device tree source + * + * Copyright (c) 2014 Google, Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> +#include "exynos5800.dtsi" + +/ { + model = "Google Peach Pi Rev 10+"; + + compatible = "google,pi-rev16", + "google,pi-rev15", "google,pi-rev14", + "google,pi-rev13", "google,pi-rev12", + "google,pi-rev11", "google,pi-rev10", + "google,pi", "google,peach", "samsung,exynos5800", + "samsung,exynos5"; + + memory { + reg = <0x20000000 0x80000000>; + }; + + fixed-rate-clocks { + oscclk { + compatible = "samsung,exynos5420-oscclk"; + clock-frequency = <24000000>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&power_key_irq>; + + power { + label = "Power"; + gpios = <&gpx1 2 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + gpio-key,wakeup; + }; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 0 1000000 0>; + brightness-levels = <0 100 500 1000 1500 2000 2500 2800>; + default-brightness-level = <7>; + pinctrl-0 = <&pwm0_out>; + pinctrl-names = "default"; + }; + + usb300_vbus_reg: regulator-usb300 { + compatible = "regulator-fixed"; + regulator-name = "P5.0V_USB3CON0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gph0 0 0>; + pinctrl-names = "default"; + pinctrl-0 = <&usb300_vbus_en>; + enable-active-high; + }; + + usb301_vbus_reg: regulator-usb301 { + compatible = "regulator-fixed"; + regulator-name = "P5.0V_USB3CON1"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gph0 1 0>; + pinctrl-names = "default"; + pinctrl-0 = <&usb301_vbus_en>; + enable-active-high; + }; +}; + +&pinctrl_0 { + tpm_irq: tpm-irq { + samsung,pins = "gpx1-0"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + power_key_irq: power-key-irq { + samsung,pins = "gpx1-2"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + dp_hpd_gpio: dp_hpd_gpio { + samsung,pins = "gpx2-6"; + samsung,pin-function = <0>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + hdmi_hpd_irq: hdmi-hpd-irq { + samsung,pins = "gpx3-7"; + samsung,pin-function = <0>; + samsung,pin-pud = <1>; + samsung,pin-drv = <0>; + }; +}; + +&pinctrl_3 { + usb300_vbus_en: usb300-vbus-en { + samsung,pins = "gph0-0"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + usb301_vbus_en: usb301-vbus-en { + samsung,pins = "gph0-1"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; +}; + +&rtc { + status = "okay"; +}; + +&uart_3 { + status = "okay"; +}; + +&mmc_0 { + status = "okay"; + num-slots = <1>; + broken-cd; + caps2-mmc-hs200-1_8v; + supports-highspeed; + non-removable; + card-detect-delay = <200>; + clock-frequency = <400000000>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <0 4>; + samsung,dw-mshc-ddr-timing = <0 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>; + + slot@0 { + reg = <0>; + bus-width = <8>; + }; +}; + +&mmc_2 { + status = "okay"; + num-slots = <1>; + supports-highspeed; + card-detect-delay = <200>; + clock-frequency = <400000000>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; + + slot@0 { + reg = <0>; + bus-width = <4>; + }; +}; + +&dp { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&dp_hpd_gpio>; + samsung,color-space = <0>; + samsung,dynamic-range = <0>; + samsung,ycbcr-coeff = <0>; + samsung,color-depth = <1>; + samsung,link-rate = <0x0a>; + samsung,lane-count = <2>; + samsung,hpd-gpio = <&gpx2 6 0>; + + display-timings { + native-mode = <&timing1>; + + timing1: timing@1 { + clock-frequency = <150660000>; + hactive = <1920>; + vactive = <1080>; + hfront-porch = <60>; + hback-porch = <172>; + hsync-len = <80>; + vback-porch = <25>; + vfront-porch = <10>; + vsync-len = <10>; + }; + }; +}; + +&fimd { + status = "okay"; + samsung,invert-vclk; +}; + +&hsi2c_9 { + status = "okay"; + clock-frequency = <400000>; + + tpm@20 { + compatible = "infineon,slb9645tt"; + reg = <0x20>; + /* Unused irq; but still need to configure the pins */ + pinctrl-names = "default"; + pinctrl-0 = <&tpm_irq>; + }; +}; + +&i2c_2 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; + samsung,i2c-slave-addr = <0x50>; +}; + +&hdmi { + status = "okay"; + hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_hpd_irq>; + ddc = <&i2c_2>; +}; + +&usbdrd_phy0 { + vbus-supply = <&usb300_vbus_reg>; +}; + +&usbdrd_phy1 { + vbus-supply = <&usb301_vbus_reg>; +}; + +/* + * Use longest HW watchdog in SoC (32 seconds) since the hardware + * watchdog provides no debugging information (compared to soft/hard + * lockup detectors) and so should be last resort. + */ +&watchdog { + timeout-sec = <32>; +}; diff --git a/arch/arm/boot/dts/exynos5800.dtsi b/arch/arm/boot/dts/exynos5800.dtsi new file mode 100644 index 000000000000..c0bb3563cac1 --- /dev/null +++ b/arch/arm/boot/dts/exynos5800.dtsi @@ -0,0 +1,28 @@ +/* + * SAMSUNG EXYNOS5800 SoC device tree source + * + * Copyright (c) 2014 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * SAMSUNG EXYNOS5800 SoC device nodes are listed in this file. + * EXYNOS5800 based board files can include this file and provide + * values for board specfic bindings. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "exynos5420.dtsi" + +/ { + compatible = "samsung,exynos5800", "samsung,exynos5"; +}; + +&clock { + compatible = "samsung,exynos5800-clock"; +}; + +&mfc { + compatible = "samsung,mfc-v8"; +}; diff --git a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts index 62fb3da50bdb..ad12da38fc92 100644 --- a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts +++ b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts @@ -172,3 +172,16 @@ fsl,uart-has-rtscts; status = "okay"; }; + +&usbhost1 { + phy_type = "serial"; + dr_mode = "host"; + status = "okay"; +}; + +&usbotg { + phy_type = "utmi"; + dr_mode = "otg"; + external-vbus-divider; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx25-karo-tx25.dts b/arch/arm/boot/dts/imx25-karo-tx25.dts index f8db366c46ff..9b31faa96377 100644 --- a/arch/arm/boot/dts/imx25-karo-tx25.dts +++ b/arch/arm/boot/dts/imx25-karo-tx25.dts @@ -16,21 +16,98 @@ model = "Ka-Ro TX25"; compatible = "karo,imx25-tx25", "fsl,imx25"; + chosen { + stdout-path = &uart1; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_fec_phy: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "fec-phy"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio4 9 0>; + enable-active-high; + }; + }; + memory { reg = <0x80000000 0x02000000 0x90000000 0x02000000>; }; }; +&iomuxc { + pinctrl_uart1: uart1grp { + fsl,pins = < + MX25_PAD_UART1_TXD__UART1_TXD 0x80000000 + MX25_PAD_UART1_RXD__UART1_RXD 0x80000000 + MX25_PAD_UART1_CTS__UART1_CTS 0x80000000 + MX25_PAD_UART1_RTS__UART1_RTS 0x80000000 + >; + }; + + pinctrl_fec: fecgrp { + fsl,pins = < + MX25_PAD_D11__GPIO_4_9 0x80000000 /* FEC PHY power on pin */ + MX25_PAD_D13__GPIO_4_7 0x80000000 /* FEC reset */ + MX25_PAD_FEC_MDC__FEC_MDC 0x80000000 + MX25_PAD_FEC_MDIO__FEC_MDIO 0x80000000 + MX25_PAD_FEC_TDATA0__FEC_TDATA0 0x80000000 + MX25_PAD_FEC_TDATA1__FEC_TDATA1 0x80000000 + MX25_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000 + MX25_PAD_FEC_RDATA0__FEC_RDATA0 0x80000000 + MX25_PAD_FEC_RDATA1__FEC_RDATA1 0x80000000 + MX25_PAD_FEC_RX_DV__FEC_RX_DV 0x80000000 + MX25_PAD_FEC_TX_CLK__FEC_TX_CLK 0x80000000 + >; + }; + + pinctrl_nfc: nfcgrp { + fsl,pins = < + MX25_PAD_NF_CE0__NF_CE0 0x80000000 + MX25_PAD_NFWE_B__NFWE_B 0x80000000 + MX25_PAD_NFRE_B__NFRE_B 0x80000000 + MX25_PAD_NFALE__NFALE 0x80000000 + MX25_PAD_NFCLE__NFCLE 0x80000000 + MX25_PAD_NFWP_B__NFWP_B 0x80000000 + MX25_PAD_NFRB__NFRB 0x80000000 + MX25_PAD_D7__D7 0x80000000 + MX25_PAD_D6__D6 0x80000000 + MX25_PAD_D5__D5 0x80000000 + MX25_PAD_D4__D4 0x80000000 + MX25_PAD_D3__D3 0x80000000 + MX25_PAD_D2__D2 0x80000000 + MX25_PAD_D1__D1 0x80000000 + MX25_PAD_D0__D0 0x80000000 + >; + }; +}; + &uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; status = "okay"; }; &fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec>; + phy-reset-gpios = <&gpio3 7 0>; phy-mode = "rmii"; + phy-supply = <®_fec_phy>; status = "okay"; }; &nfc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nfc>; nand-on-flash-bbt; + nand-ecc-mode = "hw"; + nand-bus-width = <8>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx25-pdk.dts b/arch/arm/boot/dts/imx25-pdk.dts index f607ce520eda..c608942b8a3b 100644 --- a/arch/arm/boot/dts/imx25-pdk.dts +++ b/arch/arm/boot/dts/imx25-pdk.dts @@ -10,6 +10,7 @@ */ /dts-v1/; +#include <dt-bindings/input/input.h> #include "imx25.dtsi" / { @@ -19,18 +20,232 @@ memory { reg = <0x80000000 0x4000000>; }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_fec_3v3: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "fec-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 3 0>; + enable-active-high; + }; + + reg_2p5v: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "2P5V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + }; + + reg_3p3v: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_can_3v3: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "can-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio4 6 0>; + }; + }; + + sound { + compatible = "fsl,imx25-pdk-sgtl5000", + "fsl,imx-audio-sgtl5000"; + model = "imx25-pdk-sgtl5000"; + ssi-controller = <&ssi1>; + audio-codec = <&codec>; + audio-routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + mux-int-port = <1>; + mux-ext-port = <4>; + }; }; -&uart1 { +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "okay"; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1>; + xceiver-supply = <®_can_3v3>; + status = "okay"; +}; + +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1>; + cd-gpios = <&gpio2 1 0>; + wp-gpios = <&gpio2 0 0>; status = "okay"; }; &fec { phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec>; + phy-supply = <®_fec_3v3>; + phy-reset-gpios = <&gpio4 8 0>; status = "okay"; }; +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + codec: sgtl5000@0a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + clocks = <&clks 129>; + VDDA-supply = <®_2p5v>; + VDDIO-supply = <®_3p3v>; + }; +}; + +&iomuxc { + imx25-pdk { + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX25_PAD_RW__AUD4_TXFS 0xe0 + MX25_PAD_OE__AUD4_TXC 0xe0 + MX25_PAD_EB0__AUD4_TXD 0xe0 + MX25_PAD_EB1__AUD4_RXD 0xe0 + >; + }; + + pinctrl_can1: can1grp { + fsl,pins = < + MX25_PAD_GPIO_A__CAN1_TX 0x0 + MX25_PAD_GPIO_B__CAN1_RX 0x0 + MX25_PAD_D14__GPIO_4_6 0x80000000 + >; + }; + + pinctrl_esdhc1: esdhc1grp { + fsl,pins = < + MX25_PAD_SD1_CMD__SD1_CMD 0x80000000 + MX25_PAD_SD1_CLK__SD1_CLK 0x80000000 + MX25_PAD_SD1_DATA0__SD1_DATA0 0x80000000 + MX25_PAD_SD1_DATA1__SD1_DATA1 0x80000000 + MX25_PAD_SD1_DATA2__SD1_DATA2 0x80000000 + MX25_PAD_SD1_DATA3__SD1_DATA3 0x80000000 + MX25_PAD_A14__GPIO_2_0 0x80000000 + MX25_PAD_A15__GPIO_2_1 0x80000000 + >; + }; + + pinctrl_fec: fecgrp { + fsl,pins = < + MX25_PAD_FEC_MDC__FEC_MDC 0x80000000 + MX25_PAD_FEC_MDIO__FEC_MDIO 0x400001e0 + MX25_PAD_FEC_TDATA0__FEC_TDATA0 0x80000000 + MX25_PAD_FEC_TDATA1__FEC_TDATA1 0x80000000 + MX25_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000 + MX25_PAD_FEC_RDATA0__FEC_RDATA0 0x80000000 + MX25_PAD_FEC_RDATA1__FEC_RDATA1 0x80000000 + MX25_PAD_FEC_RX_DV__FEC_RX_DV 0x80000000 + MX25_PAD_FEC_TX_CLK__FEC_TX_CLK 0x1c0 + MX25_PAD_A17__GPIO_2_3 0x80000000 + MX25_PAD_D12__GPIO_4_8 0x80000000 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX25_PAD_I2C1_CLK__I2C1_CLK 0x80000000 + MX25_PAD_I2C1_DAT__I2C1_DAT 0x80000000 + >; + }; + + pinctrl_kpp: kppgrp { + fsl,pins = < + MX25_PAD_KPP_ROW0__KPP_ROW0 0x80000000 + MX25_PAD_KPP_ROW1__KPP_ROW1 0x80000000 + MX25_PAD_KPP_ROW2__KPP_ROW2 0x80000000 + MX25_PAD_KPP_ROW3__KPP_ROW3 0x80000000 + MX25_PAD_KPP_COL0__KPP_COL0 0x80000000 + MX25_PAD_KPP_COL1__KPP_COL1 0x80000000 + MX25_PAD_KPP_COL2__KPP_COL2 0x80000000 + MX25_PAD_KPP_COL3__KPP_COL3 0x80000000 + >; + }; + + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX25_PAD_UART1_RTS__UART1_RTS 0xe0 + MX25_PAD_UART1_CTS__UART1_CTS 0xe0 + MX25_PAD_UART1_TXD__UART1_TXD 0x80000000 + MX25_PAD_UART1_RXD__UART1_RXD 0xc0 + >; + }; + }; +}; + &nfc { nand-on-flash-bbt; status = "okay"; }; + +&kpp { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_kpp>; + linux,keymap = < + MATRIX_KEY(0x0, 0x0, KEY_UP) + MATRIX_KEY(0x0, 0x1, KEY_DOWN) + MATRIX_KEY(0x0, 0x2, KEY_VOLUMEDOWN) + MATRIX_KEY(0x0, 0x3, KEY_HOME) + MATRIX_KEY(0x1, 0x0, KEY_RIGHT) + MATRIX_KEY(0x1, 0x1, KEY_LEFT) + MATRIX_KEY(0x1, 0x2, KEY_ENTER) + MATRIX_KEY(0x1, 0x3, KEY_VOLUMEUP) + MATRIX_KEY(0x2, 0x0, KEY_F6) + MATRIX_KEY(0x2, 0x1, KEY_F8) + MATRIX_KEY(0x2, 0x2, KEY_F9) + MATRIX_KEY(0x2, 0x3, KEY_F10) + MATRIX_KEY(0x3, 0x0, KEY_F1) + MATRIX_KEY(0x3, 0x1, KEY_F2) + MATRIX_KEY(0x3, 0x2, KEY_F3) + MATRIX_KEY(0x3, 0x2, KEY_POWER) + >; + status = "okay"; +}; + +&ssi1 { + codec-handle = <&codec>; + fsl,mode = "i2s-slave"; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + fsl,uart-has-rtscts; + status = "okay"; +}; + +&usbhost1 { + phy_type = "serial"; + dr_mode = "host"; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi index ea323f09dc78..bb74d9582b7e 100644 --- a/arch/arm/boot/dts/imx25.dtsi +++ b/arch/arm/boot/dts/imx25.dtsi @@ -14,6 +14,7 @@ / { aliases { + ethernet0 = &fec; gpio0 = &gpio1; gpio1 = &gpio2; gpio2 = &gpio3; @@ -21,6 +22,8 @@ i2c0 = &i2c1; i2c1 = &i2c2; i2c2 = &i2c3; + mmc0 = &esdhc1; + mmc1 = &esdhc2; serial0 = &uart1; serial1 = &uart2; serial2 = &uart3; @@ -165,9 +168,10 @@ status = "disabled"; }; - kpp@43fa8000 { + kpp: kpp@43fa8000 { #address-cells = <1>; #size-cells = <0>; + compatible = "fsl,imx25-kpp", "fsl,imx21-kpp"; reg = <0x43fa8000 0x4000>; clocks = <&clks 102>; clock-names = ""; @@ -482,23 +486,13 @@ clocks = <&clks 99>; }; - usbphy1: usbphy@1 { - compatible = "nop-usbphy"; - status = "disabled"; - }; - - usbphy2: usbphy@2 { - compatible = "nop-usbphy"; - status = "disabled"; - }; - usbotg: usb@53ff4000 { compatible = "fsl,imx25-usb", "fsl,imx27-usb"; reg = <0x53ff4000 0x0200>; interrupts = <37>; - clocks = <&clks 9>, <&clks 70>, <&clks 8>; - clock-names = "ipg", "ahb", "per"; + clocks = <&clks 70>; fsl,usbmisc = <&usbmisc 0>; + fsl,usbphy = <&usbphy0>; status = "disabled"; }; @@ -506,9 +500,9 @@ compatible = "fsl,imx25-usb", "fsl,imx27-usb"; reg = <0x53ff4400 0x0200>; interrupts = <35>; - clocks = <&clks 9>, <&clks 70>, <&clks 8>; - clock-names = "ipg", "ahb", "per"; + clocks = <&clks 70>; fsl,usbmisc = <&usbmisc 1>; + fsl,usbphy = <&usbphy1>; status = "disabled"; }; @@ -518,7 +512,6 @@ clocks = <&clks 9>, <&clks 70>, <&clks 8>; clock-names = "ipg", "ahb", "per"; reg = <0x53ff4600 0x00f>; - status = "disabled"; }; dryice@53ffc000 { @@ -530,6 +523,11 @@ }; }; + iram: sram@78000000 { + compatible = "mmio-sram"; + reg = <0x78000000 0x20000>; + }; + emi@80000000 { compatible = "fsl,emi-bus", "simple-bus"; #address-cells = <1>; @@ -550,4 +548,20 @@ }; }; }; + + usbphy { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + usbphy0: usb-phy@0 { + reg = <0>; + compatible = "usb-nop-xceiv"; + }; + + usbphy1: usb-phy@1 { + reg = <1>; + compatible = "usb-nop-xceiv"; + }; + }; }; diff --git a/arch/arm/boot/dts/imx27-pdk.dts b/arch/arm/boot/dts/imx27-pdk.dts index 5ce89aa275df..4c317716b510 100644 --- a/arch/arm/boot/dts/imx27-pdk.dts +++ b/arch/arm/boot/dts/imx27-pdk.dts @@ -17,15 +17,181 @@ compatible = "fsl,imx27-pdk", "fsl,imx27"; memory { - reg = <0x0 0x0>; + reg = <0xa0000000 0x08000000>; }; + + usbphy { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + usbphy0: usbphy@0 { + compatible = "usb-nop-xceiv"; + reg = <0>; + clocks = <&clks 0>; + clock-names = "main_clk"; + }; + }; +}; + +&cspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_cspi2>; + fsl,spi-num-chipselects = <1>; + cs-gpios = <&gpio4 21 GPIO_ACTIVE_HIGH>; + status = "okay"; + + pmic: mc13783@0 { + compatible = "fsl,mc13783"; + reg = <0>; + spi-cs-high; + spi-max-frequency = <1000000>; + interrupt-parent = <&gpio3>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH>; + + regulators { + vgen_reg: vgen { + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + vmmc1_reg: vmmc1 { + regulator-min-microvolt = <1600000>; + regulator-max-microvolt = <3000000>; + }; + + gpo1_reg: gpo1 { + regulator-always-on; + regulator-boot-on; + }; + + gpo3_reg: gpo3 { + regulator-always-on; + regulator-boot-on; + }; + }; + }; +}; + +&fec { + phy-mode = "mii"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec>; + status = "okay"; +}; + +&kpp { + linux,keymap = < + MATRIX_KEY(0, 0, KEY_UP) + MATRIX_KEY(0, 1, KEY_DOWN) + MATRIX_KEY(1, 0, KEY_RIGHT) + MATRIX_KEY(1, 1, KEY_LEFT) + MATRIX_KEY(1, 2, KEY_ENTER) + MATRIX_KEY(2, 0, KEY_F6) + MATRIX_KEY(2, 1, KEY_F8) + MATRIX_KEY(2, 2, KEY_F9) + MATRIX_KEY(2, 3, KEY_F10) + >; + status = "okay"; +}; + +&nfc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nand>; + nand-ecc-mode = "hw"; + nand-on-flash-bbt; + status = "okay"; }; &uart1 { fsl,uart-has-rtscts; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; status = "okay"; }; -&fec { +&usbotg { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + dr_mode = "otg"; + fsl,usbphy = <&usbphy0>; + phy_type = "ulpi"; status = "okay"; }; + +&iomuxc { + imx27-pdk { + pinctrl_cspi2: cspi2grp { + fsl,pins = < + MX27_PAD_CSPI2_MISO__CSPI2_MISO 0x0 + MX27_PAD_CSPI2_MOSI__CSPI2_MOSI 0x0 + MX27_PAD_CSPI2_SCLK__CSPI2_SCLK 0x0 + MX27_PAD_CSPI2_SS0__GPIO4_21 0x0 /* SPI2 CS0 */ + MX27_PAD_TOUT__GPIO3_14 0x0 /* PMIC IRQ */ + >; + }; + + pinctrl_fec: fecgrp { + fsl,pins = < + MX27_PAD_SD3_CMD__FEC_TXD0 0x0 + MX27_PAD_SD3_CLK__FEC_TXD1 0x0 + MX27_PAD_ATA_DATA0__FEC_TXD2 0x0 + MX27_PAD_ATA_DATA1__FEC_TXD3 0x0 + MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0 + MX27_PAD_ATA_DATA3__FEC_RXD1 0x0 + MX27_PAD_ATA_DATA4__FEC_RXD2 0x0 + MX27_PAD_ATA_DATA5__FEC_RXD3 0x0 + MX27_PAD_ATA_DATA6__FEC_MDIO 0x0 + MX27_PAD_ATA_DATA7__FEC_MDC 0x0 + MX27_PAD_ATA_DATA8__FEC_CRS 0x0 + MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0 + MX27_PAD_ATA_DATA10__FEC_RXD0 0x0 + MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0 + MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0 + MX27_PAD_ATA_DATA13__FEC_COL 0x0 + MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0 + MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0 + >; + }; + + pinctrl_nand: nandgrp { + fsl,pins = < + MX27_PAD_NFRB__NFRB 0x0 + MX27_PAD_NFCLE__NFCLE 0x0 + MX27_PAD_NFWP_B__NFWP_B 0x0 + MX27_PAD_NFCE_B__NFCE_B 0x0 + MX27_PAD_NFALE__NFALE 0x0 + MX27_PAD_NFRE_B__NFRE_B 0x0 + MX27_PAD_NFWE_B__NFWE_B 0x0 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX27_PAD_UART1_TXD__UART1_TXD 0x0 + MX27_PAD_UART1_RXD__UART1_RXD 0x0 + MX27_PAD_UART1_CTS__UART1_CTS 0x0 + MX27_PAD_UART1_RTS__UART1_RTS 0x0 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX27_PAD_USBOTG_NXT__USBOTG_NXT 0x0 + MX27_PAD_USBOTG_STP__USBOTG_STP 0x0 + MX27_PAD_USBOTG_DIR__USBOTG_DIR 0x0 + MX27_PAD_USBOTG_CLK__USBOTG_CLK 0x0 + MX27_PAD_USBOTG_DATA0__USBOTG_DATA0 0x0 + MX27_PAD_USBOTG_DATA1__USBOTG_DATA1 0x0 + MX27_PAD_USBOTG_DATA2__USBOTG_DATA2 0x0 + MX27_PAD_USBOTG_DATA3__USBOTG_DATA3 0x0 + MX27_PAD_USBOTG_DATA4__USBOTG_DATA4 0x0 + MX27_PAD_USBOTG_DATA5__USBOTG_DATA5 0x0 + MX27_PAD_USBOTG_DATA6__USBOTG_DATA6 0x0 + MX27_PAD_USBOTG_DATA7__USBOTG_DATA7 0x0 + >; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts b/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts index 3c3964a99637..7c869fe3c30b 100644 --- a/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts +++ b/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts @@ -15,6 +15,10 @@ model = "Phytec pca100 rapid development kit"; compatible = "phytec,imx27-pca100-rdk", "phytec,imx27-pca100", "fsl,imx27"; + chosen { + stdout-path = &uart1; + }; + display: display { model = "Primeview-PD050VL1"; native-mode = <&timing0>; diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts index df3b2e731835..fe02bc7a24fd 100644 --- a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts +++ b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts @@ -12,14 +12,79 @@ / { model = "Phytec pcm970"; compatible = "phytec,imx27-pcm970", "phytec,imx27-pcm038", "fsl,imx27"; + + chosen { + stdout-path = &uart1; + }; + + display0: LQ035Q7 { + model = "Sharp-LQ035Q7"; + native-mode = <&timing0>; + bits-per-pixel = <16>; + fsl,pcr = <0xf00080c0>; + + display-timings { + timing0: 240x320 { + clock-frequency = <5500000>; + hactive = <240>; + vactive = <320>; + hback-porch = <5>; + hsync-len = <7>; + hfront-porch = <16>; + vback-porch = <7>; + vsync-len = <1>; + vfront-porch = <9>; + pixelclk-active = <1>; + hsync-active = <1>; + vsync-active = <1>; + de-active = <0>; + }; + }; + }; + + regulators { + regulator@2 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_csien>; + reg = <2>; + regulator-name = "CSI_EN"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 24 GPIO_ACTIVE_LOW>; + regulator-always-on; + }; + }; + + usbphy { + usbphy2: usbphy@2 { + compatible = "usb-nop-xceiv"; + reg = <2>; + vcc-supply = <®_5v0>; + clocks = <&clks 0>; + clock-names = "main_clk"; + }; + }; }; &cspi1 { + pinctrl-0 = <&pinctrl_cspi1>, <&pinctrl_cspi1cs1>; fsl,spi-num-chipselects = <2>; cs-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>, <&gpio4 27 GPIO_ACTIVE_LOW>; }; +&fb { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_imxfb1>; + display = <&display0>; + lcd-supply = <®_5v0>; + fsl,dmacr = <0x00020010>; + fsl,lscr1 = <0x00120300>; + fsl,lpccr = <0x00a903ff>; + status = "okay"; +}; + &i2c1 { clock-frequency = <400000>; pinctrl-names = "default"; @@ -36,6 +101,50 @@ &iomuxc { imx27_phycore_rdk { + pinctrl_csien: csiengrp { + fsl,pins = < + MX27_PAD_USB_OC_B__GPIO2_24 0x0 + >; + }; + + pinctrl_cspi1cs1: cspi1cs1grp { + fsl,pins = < + MX27_PAD_CSPI1_SS1__GPIO4_27 0x0 + >; + }; + + pinctrl_imxfb1: imxfbgrp { + fsl,pins = < + MX27_PAD_LD0__LD0 0x0 + MX27_PAD_LD1__LD1 0x0 + MX27_PAD_LD2__LD2 0x0 + MX27_PAD_LD3__LD3 0x0 + MX27_PAD_LD4__LD4 0x0 + MX27_PAD_LD5__LD5 0x0 + MX27_PAD_LD6__LD6 0x0 + MX27_PAD_LD7__LD7 0x0 + MX27_PAD_LD8__LD8 0x0 + MX27_PAD_LD9__LD9 0x0 + MX27_PAD_LD10__LD10 0x0 + MX27_PAD_LD11__LD11 0x0 + MX27_PAD_LD12__LD12 0x0 + MX27_PAD_LD13__LD13 0x0 + MX27_PAD_LD14__LD14 0x0 + MX27_PAD_LD15__LD15 0x0 + MX27_PAD_LD16__LD16 0x0 + MX27_PAD_LD17__LD17 0x0 + MX27_PAD_CLS__CLS 0x0 + MX27_PAD_CONTRAST__CONTRAST 0x0 + MX27_PAD_LSCLK__LSCLK 0x0 + MX27_PAD_OE_ACD__OE_ACD 0x0 + MX27_PAD_PS__PS 0x0 + MX27_PAD_REV__REV 0x0 + MX27_PAD_SPL_SPR__SPL_SPR 0x0 + MX27_PAD_HSYNC__HSYNC 0x0 + MX27_PAD_VSYNC__VSYNC 0x0 + >; + }; + pinctrl_i2c1: i2c1grp { /* Add pullup to DATA line */ fsl,pins = < @@ -193,19 +302,16 @@ dr_mode = "host"; phy_type = "ulpi"; vbus-supply = <®_5v0>; + fsl,usbphy = <&usbphy2>; disable-over-current; status = "okay"; }; -&usbphy2 { - vcc-supply = <®_5v0>; -}; - &weim { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_weim>; - can@d4000000 { + can@4,0 { compatible = "nxp,sja1000"; reg = <4 0x00000000 0x00000100>; interrupt-parent = <&gpio5>; diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi index cefaa6994623..31e9f7049f73 100644 --- a/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi +++ b/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi @@ -41,6 +41,20 @@ regulator-max-microvolt = <5000000>; }; }; + + usbphy { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + usbphy0: usbphy@0 { + compatible = "usb-nop-xceiv"; + reg = <0>; + vcc-supply = <&sw3_reg>; + clocks = <&clks 0>; + clock-names = "main_clk"; + }; + }; }; &audmux { @@ -66,9 +80,9 @@ status = "okay"; pmic: mc13783@0 { - #address-cells = <1>; - #size-cells = <0>; compatible = "fsl,mc13783"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; reg = <0>; spi-cs-high; spi-max-frequency = <20000000>; @@ -166,7 +180,7 @@ &fec { phy-mode = "mii"; - phy-reset-gpios = <&gpio3 30 GPIO_ACTIVE_HIGH>; + phy-reset-gpios = <&gpio3 30 GPIO_ACTIVE_LOW>; phy-supply = <®_3v3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fec1>; @@ -204,7 +218,6 @@ MX27_PAD_CSPI1_MOSI__CSPI1_MOSI 0x0 MX27_PAD_CSPI1_SCLK__CSPI1_SCLK 0x0 MX27_PAD_CSPI1_SS0__GPIO4_28 0x0 /* SPI1 CS0 */ - MX27_PAD_USB_PWR__GPIO2_23 0x0 /* PMIC IRQ */ >; }; @@ -251,6 +264,21 @@ >; }; + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX27_PAD_USB_PWR__GPIO2_23 0x0 /* PMIC IRQ */ + >; + }; + + pinctrl_ssi1: ssi1grp { + fsl,pins = < + MX27_PAD_SSI1_FS__SSI1_FS 0x0 + MX27_PAD_SSI1_RXDAT__SSI1_RXDAT 0x0 + MX27_PAD_SSI1_TXDAT__SSI1_TXDAT 0x0 + MX27_PAD_SSI1_CLK__SSI1_CLK 0x0 + >; + }; + pinctrl_usbotg: usbotggrp { fsl,pins = < MX27_PAD_USBOTG_CLK__USBOTG_CLK 0x0 @@ -279,23 +307,28 @@ status = "okay"; }; +&ssi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ssi1>; + fsl,mode = "i2s-slave"; + status = "okay"; +}; + &usbotg { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbotg>; dr_mode = "otg"; phy_type = "ulpi"; + fsl,usbphy = <&usbphy0>; vbus-supply = <&sw3_reg>; + disable-over-current; status = "okay"; }; -&usbphy0 { - vcc-supply = <&sw3_reg>; -}; - &weim { status = "okay"; - nor: nor@c0000000 { + nor: nor@0,0 { compatible = "cfi-flash"; reg = <0 0x00000000 0x02000000>; bank-width = <2>; @@ -305,7 +338,7 @@ #size-cells = <1>; }; - sram: sram@c8000000 { + sram: sram@1,0 { compatible = "mtd-ram"; reg = <1 0x00000000 0x00800000>; bank-width = <2>; diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi index 137e010eab35..a75555c39533 100644 --- a/arch/arm/boot/dts/imx27.dtsi +++ b/arch/arm/boot/dts/imx27.dtsi @@ -11,11 +11,13 @@ #include "skeleton.dtsi" #include "imx27-pinfunc.h" +#include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/gpio/gpio.h> / { aliases { + ethernet0 = &fec; gpio0 = &gpio1; gpio1 = &gpio2; gpio2 = &gpio3; @@ -71,26 +73,6 @@ }; }; - usbphy { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - usbphy0: usbphy@0 { - compatible = "usb-nop-xceiv"; - reg = <0>; - clocks = <&clks 75>; - clock-names = "main_clk"; - }; - - usbphy2: usbphy@2 { - compatible = "usb-nop-xceiv"; - reg = <2>; - clocks = <&clks 75>; - clock-names = "main_clk"; - }; - }; - soc { #address-cells = <1>; #size-cells = <1>; @@ -464,9 +446,8 @@ compatible = "fsl,imx27-usb"; reg = <0x10024000 0x200>; interrupts = <56>; - clocks = <&clks 15>; + clocks = <&clks 75>; fsl,usbmisc = <&usbmisc 0>; - fsl,usbphy = <&usbphy0>; status = "disabled"; }; @@ -474,7 +455,7 @@ compatible = "fsl,imx27-usb"; reg = <0x10024200 0x200>; interrupts = <54>; - clocks = <&clks 15>; + clocks = <&clks 75>; fsl,usbmisc = <&usbmisc 1>; status = "disabled"; }; @@ -483,9 +464,8 @@ compatible = "fsl,imx27-usb"; reg = <0x10024400 0x200>; interrupts = <55>; - clocks = <&clks 15>; + clocks = <&clks 75>; fsl,usbmisc = <&usbmisc 2>; - fsl,usbphy = <&usbphy2>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx28-duckbill.dts b/arch/arm/boot/dts/imx28-duckbill.dts index 5f326c1c1850..ce1a7effba37 100644 --- a/arch/arm/boot/dts/imx28-duckbill.dts +++ b/arch/arm/boot/dts/imx28-duckbill.dts @@ -25,9 +25,9 @@ ssp0: ssp@80010000 { compatible = "fsl,imx28-mmc"; pinctrl-names = "default"; - pinctrl-0 = <&mmc0_8bit_pins_a + pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_cd_cfg &mmc0_sck_cfg>; - bus-width = <8>; + bus-width = <4>; vmmc-supply = <®_3p3v>; status = "okay"; }; @@ -39,7 +39,7 @@ hog_pins_a: hog@0 { reg = <0>; fsl,pinmux-ids = < - MX28_PAD_ENET0_RX_CLK__GPIO_4_13 /* PHY Reset */ + MX28_PAD_SSP0_DATA7__GPIO_2_7 /* PHY Reset */ >; fsl,drive-strength = <MXS_DRIVE_4mA>; fsl,voltage = <MXS_VOLTAGE_HIGH>; @@ -82,7 +82,7 @@ pinctrl-names = "default"; pinctrl-0 = <&mac0_pins_a>; phy-supply = <®_3p3v>; - phy-reset-gpios = <&gpio4 13 0>; + phy-reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>; phy-reset-duration = <100>; status = "okay"; }; @@ -110,12 +110,12 @@ status { label = "duckbill:green:status"; - gpios = <&gpio3 5 0>; + gpios = <&gpio3 5 GPIO_ACTIVE_HIGH>; }; failure { label = "duckbill:red:status"; - gpios = <&gpio3 4 0>; + gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>; }; }; }; diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index 90a579532b8b..a95cc5358ff4 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -9,6 +9,7 @@ * http://www.gnu.org/copyleft/gpl.html */ +#include <dt-bindings/gpio/gpio.h> #include "skeleton.dtsi" #include "imx28-pinfunc.h" diff --git a/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi b/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi index 906ae937b013..9c2b715ab8bf 100644 --- a/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi +++ b/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi @@ -37,6 +37,17 @@ compatible = "nxp,pcf8563"; reg = <0x51>; }; + + tsc2007: tsc2007@48 { + compatible = "ti,tsc2007"; + gpios = <&gpio3 2 0>; + interrupt-parent = <&gpio3>; + interrupts = <0x2 0x8>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tsc2007_1>; + reg = <0x48>; + ti,x-plate-ohms = <180>; + }; }; &iomuxc { @@ -70,6 +81,10 @@ MX35_PAD_I2C1_DAT__I2C1_SDA 0x80000000 >; }; + + pinctrl_tsc2007_1: tsc2007grp-1 { + fsl,pins = <MX35_PAD_ATA_DA2__GPIO3_2 0x80000000>; + }; }; }; diff --git a/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts index 1bdec21f4533..f04ae91eea89 100644 --- a/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts +++ b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts @@ -46,6 +46,14 @@ linux,default-trigger = "heartbeat"; }; }; + + sound { + compatible = "eukrea,asoc-tlv320"; + eukrea,model = "imx35-eukrea-tlv320aic23"; + ssi-controller = <&ssi1>; + fsl,mux-int-port = <1>; + fsl,mux-ext-port = <4>; + }; }; &audmux { @@ -124,6 +132,7 @@ }; &ssi1 { + codec-handle = <&tlv320aic23>; fsl,mode = "i2s-slave"; status = "okay"; }; @@ -141,3 +150,16 @@ fsl,uart-has-rtscts; status = "okay"; }; + +&usbhost1 { + phy_type = "serial"; + dr_mode = "host"; + status = "okay"; +}; + +&usbotg { + phy_type = "utmi"; + dr_mode = "otg"; + external-vbus-divider; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx35-pdk.dts b/arch/arm/boot/dts/imx35-pdk.dts new file mode 100644 index 000000000000..8d715523708f --- /dev/null +++ b/arch/arm/boot/dts/imx35-pdk.dts @@ -0,0 +1,68 @@ +/* + * Copyright 2013 Eukréa Electromatique <denis@eukrea.com> + * Copyright 2014 Freescale Semiconductor, Inc. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +#include "imx35.dtsi" + +/ { + model = "Freescale i.MX35 Product Development Kit"; + compatible = "fsl,imx35-pdk", "fsl,imx35"; + + memory { + reg = <0x80000000 0x8000000>, + <0x90000000 0x8000000>; + }; +}; + +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1>; + status = "okay"; +}; + +&iomuxc { + imx35-pdk { + pinctrl_esdhc1: esdhc1grp { + fsl,pins = < + MX35_PAD_SD1_CMD__ESDHC1_CMD 0x80000000 + MX35_PAD_SD1_CLK__ESDHC1_CLK 0x80000000 + MX35_PAD_SD1_DATA0__ESDHC1_DAT0 0x80000000 + MX35_PAD_SD1_DATA1__ESDHC1_DAT1 0x80000000 + MX35_PAD_SD1_DATA2__ESDHC1_DAT2 0x80000000 + MX35_PAD_SD1_DATA3__ESDHC1_DAT3 0x80000000 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX35_PAD_TXD1__UART1_TXD_MUX 0x1c5 + MX35_PAD_RXD1__UART1_RXD_MUX 0x1c5 + MX35_PAD_CTS1__UART1_CTS 0x1c5 + MX35_PAD_RTS1__UART1_RTS 0x1c5 + >; + }; + }; +}; + +&nfc { + nand-bus-width = <16>; + nand-ecc-mode = "hw"; + nand-on-flash-bbt; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + fsl,uart-has-rtscts; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx35.dtsi b/arch/arm/boot/dts/imx35.dtsi index 88b218f8f810..4759abb49436 100644 --- a/arch/arm/boot/dts/imx35.dtsi +++ b/arch/arm/boot/dts/imx35.dtsi @@ -13,6 +13,7 @@ / { aliases { + ethernet0 = &fec; gpio0 = &gpio1; gpio1 = &gpio2; gpio2 = &gpio3; @@ -295,9 +296,9 @@ compatible = "fsl,imx35-usb", "fsl,imx27-usb"; reg = <0x53ff4000 0x0200>; interrupts = <37>; - clocks = <&clks 9>, <&clks 73>, <&clks 28>; - clock-names = "ipg", "ahb", "per"; + clocks = <&clks 73>; fsl,usbmisc = <&usbmisc 0>; + fsl,usbphy = <&usbphy0>; status = "disabled"; }; @@ -305,9 +306,9 @@ compatible = "fsl,imx35-usb", "fsl,imx27-usb"; reg = <0x53ff4400 0x0200>; interrupts = <35>; - clocks = <&clks 9>, <&clks 73>, <&clks 28>; - clock-names = "ipg", "ahb", "per"; + clocks = <&clks 73>; fsl,usbmisc = <&usbmisc 1>; + fsl,usbphy = <&usbphy1>; status = "disabled"; }; @@ -356,4 +357,20 @@ }; }; }; + + usbphy { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + usbphy0: usb-phy@0 { + reg = <0>; + compatible = "usb-nop-xceiv"; + }; + + usbphy1: usb-phy@1 { + reg = <1>; + compatible = "usb-nop-xceiv"; + }; + }; }; diff --git a/arch/arm/boot/dts/imx50.dtsi b/arch/arm/boot/dts/imx50.dtsi index 9c89d1ca97c2..6a201cf54366 100644 --- a/arch/arm/boot/dts/imx50.dtsi +++ b/arch/arm/boot/dts/imx50.dtsi @@ -17,6 +17,7 @@ / { aliases { + ethernet0 = &fec; gpio0 = &gpio1; gpio1 = &gpio2; gpio2 = &gpio3; diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts index 9e9deb244b76..6bc3243a80d3 100644 --- a/arch/arm/boot/dts/imx51-babbage.dts +++ b/arch/arm/boot/dts/imx51-babbage.dts @@ -17,10 +17,28 @@ model = "Freescale i.MX51 Babbage Board"; compatible = "fsl,imx51-babbage", "fsl,imx51"; + chosen { + stdout-path = &uart1; + }; + memory { reg = <0x90000000 0x20000000>; }; + clocks { + ckih1 { + clock-frequency = <22579200>; + }; + + clk_26M: codec_clock { + compatible = "fixed-clock"; + reg=<0>; + #clock-cells = <0>; + clock-frequency = <26000000>; + gpios = <&gpio4 26 GPIO_ACTIVE_LOW>; + }; + }; + display0: display@di0 { compatible = "fsl,imx-parallel-display"; interface-pix-fmt = "rgb24"; @@ -82,11 +100,13 @@ gpio-keys { compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; power { label = "Power Button"; gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>; - linux,code = <116>; /* KEY_POWER */ + linux,code = <KEY_POWER>; gpio-key,wakeup; }; }; @@ -102,6 +122,36 @@ }; }; + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_usbh1_vbus: regulator@0 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1reg>; + reg = <0>; + regulator-name = "usbh1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio2 5 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usbotg_vbus: regulator@1 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotgreg>; + reg = <1>; + regulator-name = "usbotg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + }; + sound { compatible = "fsl,imx51-babbage-sgtl5000", "fsl,imx-audio-sgtl5000"; @@ -116,41 +166,23 @@ mux-ext-port = <3>; }; - clocks { - ckih1 { - clock-frequency = <22579200>; - }; + usbphy { + #address-cells = <1>; + #size-cells = <0>; + compatible = "simple-bus"; - clk_26M: codec_clock { - compatible = "fixed-clock"; - reg=<0>; - #clock-cells = <0>; - clock-frequency = <26000000>; - gpios = <&gpio4 26 GPIO_ACTIVE_LOW>; + usbh1phy: usbh1phy@0 { + compatible = "usb-nop-xceiv"; + reg = <0>; + clocks = <&clks IMX5_CLK_DUMMY>; + clock-names = "main_clk"; }; }; }; -&esdhc1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_esdhc1>; - fsl,cd-controller; - fsl,wp-controller; - status = "okay"; -}; - -&esdhc2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_esdhc2>; - cd-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; - wp-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; - status = "okay"; -}; - -&uart3 { +&audmux { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart3>; - fsl,uart-has-rtscts; + pinctrl-0 = <&pinctrl_audmux>; status = "okay"; }; @@ -163,9 +195,9 @@ status = "okay"; pmic: mc13892@0 { - #address-cells = <1>; - #size-cells = <0>; compatible = "fsl,mc13892"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; spi-max-frequency = <6000000>; spi-cs-high; reg = <0>; @@ -280,6 +312,53 @@ }; }; +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1>; + fsl,cd-controller; + fsl,wp-controller; + status = "okay"; +}; + +&esdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc2>; + cd-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; + wp-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec>; + phy-mode = "mii"; + phy-reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>; + phy-reset-duration = <1>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + sgtl5000: codec@0a { + compatible = "fsl,sgtl5000"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_clkcodec>; + reg = <0x0a>; + clocks = <&clk_26M>; + VDDA-supply = <&vdig_reg>; + VDDIO-supply = <&vvideo_reg>; + }; +}; + &ipu_di0_disp0 { remote-endpoint = <&display0_in>; }; @@ -288,29 +367,74 @@ remote-endpoint = <&display1_in>; }; +&kpp { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_kpp>; + linux,keymap = < + MATRIX_KEY(0, 0, KEY_UP) + MATRIX_KEY(0, 1, KEY_DOWN) + MATRIX_KEY(0, 2, KEY_VOLUMEDOWN) + MATRIX_KEY(0, 3, KEY_HOME) + MATRIX_KEY(1, 0, KEY_RIGHT) + MATRIX_KEY(1, 1, KEY_LEFT) + MATRIX_KEY(1, 2, KEY_ENTER) + MATRIX_KEY(1, 3, KEY_VOLUMEUP) + MATRIX_KEY(2, 0, KEY_F6) + MATRIX_KEY(2, 1, KEY_F8) + MATRIX_KEY(2, 2, KEY_F9) + MATRIX_KEY(2, 3, KEY_F10) + MATRIX_KEY(3, 0, KEY_F1) + MATRIX_KEY(3, 1, KEY_F2) + MATRIX_KEY(3, 2, KEY_F3) + MATRIX_KEY(3, 3, KEY_POWER) + >; + status = "okay"; +}; + &ssi2 { fsl,mode = "i2s-slave"; status = "okay"; }; -&iomuxc { +&uart1 { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hog>; + pinctrl-0 = <&pinctrl_uart1>; + fsl,uart-has-rtscts; + status = "okay"; +}; - imx51-babbage { - pinctrl_hog: hoggrp { - fsl,pins = < - MX51_PAD_GPIO1_0__SD1_CD 0x20d5 - MX51_PAD_GPIO1_1__SD1_WP 0x20d5 - MX51_PAD_GPIO1_5__GPIO1_5 0x100 - MX51_PAD_GPIO1_6__GPIO1_6 0x100 - MX51_PAD_EIM_A27__GPIO2_21 0x5 - MX51_PAD_CSPI1_SS0__GPIO4_24 0x85 - MX51_PAD_CSPI1_SS1__GPIO4_25 0x85 - MX51_PAD_CSPI1_RDY__GPIO4_26 0x80000000 - >; - }; +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + fsl,uart-has-rtscts; + status = "okay"; +}; + +&usbh1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1>; + vbus-supply = <®_usbh1_vbus>; + fsl,usbphy = <&usbh1phy>; + phy_type = "ulpi"; + status = "okay"; +}; +&usbotg { + dr_mode = "otg"; + disable-over-current; + phy_type = "utmi_wide"; + vbus-supply = <®_usbotg_vbus>; + status = "okay"; +}; + +&iomuxc { + imx51-babbage { pinctrl_audmux: audmuxgrp { fsl,pins = < MX51_PAD_AUD3_BB_TXD__AUD3_TXD 0x80000000 @@ -320,11 +444,19 @@ >; }; + pinctrl_clkcodec: clkcodecgrp { + fsl,pins = < + MX51_PAD_CSPI1_RDY__GPIO4_26 0x80000000 + >; + }; + pinctrl_ecspi1: ecspi1grp { fsl,pins = < MX51_PAD_CSPI1_MISO__ECSPI1_MISO 0x185 MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI 0x185 MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK 0x185 + MX51_PAD_CSPI1_SS0__GPIO4_24 0x85 /* CS0 */ + MX51_PAD_CSPI1_SS1__GPIO4_25 0x85 /* CS1 */ >; }; @@ -336,6 +468,8 @@ MX51_PAD_SD1_DATA1__SD1_DATA1 0x20d5 MX51_PAD_SD1_DATA2__SD1_DATA2 0x20d5 MX51_PAD_SD1_DATA3__SD1_DATA3 0x20d5 + MX51_PAD_GPIO1_0__SD1_CD 0x20d5 + MX51_PAD_GPIO1_1__SD1_WP 0x20d5 >; }; @@ -347,29 +481,38 @@ MX51_PAD_SD2_DATA1__SD2_DATA1 0x20d5 MX51_PAD_SD2_DATA2__SD2_DATA2 0x20d5 MX51_PAD_SD2_DATA3__SD2_DATA3 0x20d5 + MX51_PAD_GPIO1_5__GPIO1_5 0x100 /* WP */ + MX51_PAD_GPIO1_6__GPIO1_6 0x100 /* CD */ >; }; pinctrl_fec: fecgrp { fsl,pins = < - MX51_PAD_EIM_EB2__FEC_MDIO 0x80000000 - MX51_PAD_EIM_EB3__FEC_RDATA1 0x80000000 - MX51_PAD_EIM_CS2__FEC_RDATA2 0x80000000 - MX51_PAD_EIM_CS3__FEC_RDATA3 0x80000000 - MX51_PAD_EIM_CS4__FEC_RX_ER 0x80000000 - MX51_PAD_EIM_CS5__FEC_CRS 0x80000000 - MX51_PAD_NANDF_RB2__FEC_COL 0x80000000 - MX51_PAD_NANDF_RB3__FEC_RX_CLK 0x80000000 - MX51_PAD_NANDF_D9__FEC_RDATA0 0x80000000 - MX51_PAD_NANDF_D8__FEC_TDATA0 0x80000000 - MX51_PAD_NANDF_CS2__FEC_TX_ER 0x80000000 - MX51_PAD_NANDF_CS3__FEC_MDC 0x80000000 - MX51_PAD_NANDF_CS4__FEC_TDATA1 0x80000000 - MX51_PAD_NANDF_CS5__FEC_TDATA2 0x80000000 - MX51_PAD_NANDF_CS6__FEC_TDATA3 0x80000000 - MX51_PAD_NANDF_CS7__FEC_TX_EN 0x80000000 - MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK 0x80000000 - MX51_PAD_EIM_A20__GPIO2_14 0x85 /* Reset */ + MX51_PAD_EIM_EB2__FEC_MDIO 0x000001f5 + MX51_PAD_EIM_EB3__FEC_RDATA1 0x00000085 + MX51_PAD_EIM_CS2__FEC_RDATA2 0x00000085 + MX51_PAD_EIM_CS3__FEC_RDATA3 0x00000085 + MX51_PAD_EIM_CS4__FEC_RX_ER 0x00000180 + MX51_PAD_EIM_CS5__FEC_CRS 0x00000180 + MX51_PAD_NANDF_RB2__FEC_COL 0x00000180 + MX51_PAD_NANDF_RB3__FEC_RX_CLK 0x00000180 + MX51_PAD_NANDF_D9__FEC_RDATA0 0x00002180 + MX51_PAD_NANDF_D8__FEC_TDATA0 0x00002004 + MX51_PAD_NANDF_CS2__FEC_TX_ER 0x00002004 + MX51_PAD_NANDF_CS3__FEC_MDC 0x00002004 + MX51_PAD_NANDF_CS4__FEC_TDATA1 0x00002004 + MX51_PAD_NANDF_CS5__FEC_TDATA2 0x00002004 + MX51_PAD_NANDF_CS6__FEC_TDATA3 0x00002004 + MX51_PAD_NANDF_CS7__FEC_TX_EN 0x00002004 + MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK 0x00002180 + MX51_PAD_NANDF_D11__FEC_RX_DV 0x000020a4 + MX51_PAD_EIM_A20__GPIO2_14 0x00000085 /* Phy Reset */ + >; + }; + + pinctrl_gpio_keys: gpiokeysgrp { + fsl,pins = < + MX51_PAD_EIM_A27__GPIO2_21 0x5 >; }; @@ -379,6 +522,13 @@ >; }; + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX51_PAD_EIM_D19__I2C1_SCL 0x400001ed + MX51_PAD_EIM_D16__I2C1_SDA 0x400001ed + >; + }; + pinctrl_i2c2: i2c2grp { fsl,pins = < MX51_PAD_KEY_COL4__I2C2_SCL 0x400001ed @@ -455,6 +605,12 @@ >; }; + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX51_PAD_GPIO1_8__GPIO1_8 0xe5 /* IRQ */ + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX51_PAD_UART1_RXD__UART1_RXD 0x1c5 @@ -479,71 +635,33 @@ MX51_PAD_EIM_D24__UART3_CTS 0x1c5 >; }; - }; -}; -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1>; - fsl,uart-has-rtscts; - status = "okay"; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; - status = "okay"; -}; + pinctrl_usbh1: usbh1grp { + fsl,pins = < + MX51_PAD_USBH1_CLK__USBH1_CLK 0x80000000 + MX51_PAD_USBH1_DIR__USBH1_DIR 0x80000000 + MX51_PAD_USBH1_NXT__USBH1_NXT 0x80000000 + MX51_PAD_USBH1_DATA0__USBH1_DATA0 0x80000000 + MX51_PAD_USBH1_DATA1__USBH1_DATA1 0x80000000 + MX51_PAD_USBH1_DATA2__USBH1_DATA2 0x80000000 + MX51_PAD_USBH1_DATA3__USBH1_DATA3 0x80000000 + MX51_PAD_USBH1_DATA4__USBH1_DATA4 0x80000000 + MX51_PAD_USBH1_DATA5__USBH1_DATA5 0x80000000 + MX51_PAD_USBH1_DATA6__USBH1_DATA6 0x80000000 + MX51_PAD_USBH1_DATA7__USBH1_DATA7 0x80000000 + >; + }; -&i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c2>; - status = "okay"; + pinctrl_usbh1reg: usbh1reggrp { + fsl,pins = < + MX51_PAD_EIM_D21__GPIO2_5 0x85 + >; + }; - sgtl5000: codec@0a { - compatible = "fsl,sgtl5000"; - reg = <0x0a>; - clocks = <&clk_26M>; - VDDA-supply = <&vdig_reg>; - VDDIO-supply = <&vvideo_reg>; + pinctrl_usbotgreg: usbotgreggrp { + fsl,pins = < + MX51_PAD_GPIO1_7__GPIO1_7 0x85 + >; + }; }; }; - -&audmux { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_audmux>; - status = "okay"; -}; - -&fec { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_fec>; - phy-mode = "mii"; - phy-reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>; - phy-reset-duration = <1>; - status = "okay"; -}; - -&kpp { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_kpp>; - linux,keymap = < - MATRIX_KEY(0, 0, KEY_UP) - MATRIX_KEY(0, 1, KEY_DOWN) - MATRIX_KEY(0, 2, KEY_VOLUMEDOWN) - MATRIX_KEY(0, 3, KEY_HOME) - MATRIX_KEY(1, 0, KEY_RIGHT) - MATRIX_KEY(1, 1, KEY_LEFT) - MATRIX_KEY(1, 2, KEY_ENTER) - MATRIX_KEY(1, 3, KEY_VOLUMEUP) - MATRIX_KEY(2, 0, KEY_F6) - MATRIX_KEY(2, 1, KEY_F8) - MATRIX_KEY(2, 2, KEY_F9) - MATRIX_KEY(2, 3, KEY_F10) - MATRIX_KEY(3, 0, KEY_F1) - MATRIX_KEY(3, 1, KEY_F2) - MATRIX_KEY(3, 2, KEY_F3) - MATRIX_KEY(3, 3, KEY_POWER) - >; - status = "okay"; -}; diff --git a/arch/arm/boot/dts/imx51-digi-connectcore-jsk.dts b/arch/arm/boot/dts/imx51-digi-connectcore-jsk.dts new file mode 100644 index 000000000000..1db517d3d497 --- /dev/null +++ b/arch/arm/boot/dts/imx51-digi-connectcore-jsk.dts @@ -0,0 +1,108 @@ +/* + * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include "imx51-digi-connectcore-som.dtsi" + +/ { + model = "Digi ConnectCore CC(W)-MX51 JSK"; + compatible = "digi,connectcore-ccxmx51-jsk", + "digi,connectcore-ccxmx51-som", "fsl,imx51"; + + chosen { + linux,stdout-path = &uart1; + }; +}; + +&owire { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_owire>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&usbotg { + dr_mode = "otg"; + status = "okay"; +}; + +&usbh1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1>; + dr_mode = "host"; + phy_type = "ulpi"; + disable-over-current; + status = "okay"; +}; + +&iomuxc { + imx51-digi-connectcore-jsk { + pinctrl_owire: owiregrp { + fsl,pins = < + MX51_PAD_OWIRE_LINE__OWIRE_LINE 0x40000000 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX51_PAD_UART1_RXD__UART1_RXD 0x1c5 + MX51_PAD_UART1_TXD__UART1_TXD 0x1c5 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX51_PAD_UART2_RXD__UART2_RXD 0x1c5 + MX51_PAD_UART2_TXD__UART2_TXD 0x1c5 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX51_PAD_UART3_RXD__UART3_RXD 0x1c5 + MX51_PAD_UART3_TXD__UART3_TXD 0x1c5 + >; + }; + + pinctrl_usbh1: usbh1grp { + fsl,pins = < + MX51_PAD_USBH1_DATA0__USBH1_DATA0 0x1e5 + MX51_PAD_USBH1_DATA1__USBH1_DATA1 0x1e5 + MX51_PAD_USBH1_DATA2__USBH1_DATA2 0x1e5 + MX51_PAD_USBH1_DATA3__USBH1_DATA3 0x1e5 + MX51_PAD_USBH1_DATA4__USBH1_DATA4 0x1e5 + MX51_PAD_USBH1_DATA5__USBH1_DATA5 0x1e5 + MX51_PAD_USBH1_DATA6__USBH1_DATA6 0x1e5 + MX51_PAD_USBH1_DATA7__USBH1_DATA7 0x1e5 + MX51_PAD_USBH1_CLK__USBH1_CLK 0x1e5 + MX51_PAD_USBH1_DIR__USBH1_DIR 0x1e5 + MX51_PAD_USBH1_NXT__USBH1_NXT 0x1e5 + MX51_PAD_USBH1_STP__USBH1_STP 0x1e5 + >; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi b/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi new file mode 100644 index 000000000000..321662f53e33 --- /dev/null +++ b/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi @@ -0,0 +1,377 @@ +/* + * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +#include "imx51.dtsi" + +/ { + model = "Digi ConnectCore CC(W)-MX51"; + compatible = "digi,connectcore-ccxmx51-som", "fsl,imx51"; + + memory { + reg = <0x90000000 0x08000000>; + }; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + fsl,spi-num-chipselects = <1>; + cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>; + status = "okay"; + + pmic: mc13892@0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mc13892>; + compatible = "fsl,mc13892"; + spi-max-frequency = <16000000>; + spi-cs-high; + reg = <0>; + interrupt-parent = <&gpio1>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; + fsl,mc13xxx-uses-rtc; + + regulators { + sw1_reg: sw1 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1100000>; + regulator-boot-on; + regulator-always-on; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3_reg: sw3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-boot-on; + regulator-always-on; + }; + + swbst_reg: swbst { }; + + viohi_reg: viohi { + regulator-always-on; + }; + + vpll_reg: vpll { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vdig_reg: vdig { + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + regulator-always-on; + }; + + vsd_reg: vsd { + regulator-min-microvolt = <3150000>; + regulator-max-microvolt = <3150000>; + regulator-always-on; + }; + + vusb2_reg: vusb2 { + regulator-min-microvolt = <2600000>; + regulator-max-microvolt = <2600000>; + regulator-always-on; + }; + + vvideo_reg: vvideo { + regulator-min-microvolt = <2775000>; + regulator-max-microvolt = <2775000>; + regulator-always-on; + }; + + vaudio_reg: vaudio { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + + vcam_reg: vcam { + regulator-min-microvolt = <2750000>; + regulator-max-microvolt = <2750000>; + regulator-always-on; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + vgen2_reg: vgen2 { + regulator-min-microvolt = <3150000>; + regulator-max-microvolt = <3150000>; + regulator-always-on; + }; + + vgen3_reg: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vusb_reg: vusb { + regulator-always-on; + }; + + gpo1_reg: gpo1 { }; + + gpo2_reg: gpo2 { }; + + gpo3_reg: gpo3 { }; + + gpo4_reg: gpo4 { }; + + pwgt2spi_reg: pwgt2spi { + regulator-always-on; + }; + + vcoincell_reg: vcoincell { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + }; + }; +}; + +&esdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc2>; + cap-sdio-irq; + enable-sdio-wakeup; + keep-power-in-suspend; + max-frequency = <50000000>; + no-1-8-v; + non-removable; + vmmc-supply = <&gpo4_reg>; + status = "okay"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec>; + phy-mode = "mii"; + phy-supply = <&gpo3_reg>; + /* Pins shared with LCD2, keep status disabled */ +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + clock-frequency = <400000>; + status = "okay"; + + mma7455l@1d { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mma7455l>; + compatible = "fsl,mma7455l"; + reg = <0x1d>; + interrupt-parent = <&gpio1>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH>, <6 IRQ_TYPE_LEVEL_HIGH>; + }; +}; + +&nfc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nfc>; + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + nand-on-flash-bbt; + status = "okay"; +}; + +&usbotg { + phy_type = "utmi_wide"; + disable-over-current; + /* Device role is not known, keep status disabled */ +}; + +&weim { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_weim>; + status = "okay"; + + lan9221: lan9221@5,0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lan9221>; + compatible = "smsc,lan9221", "smsc,lan9115"; + reg = <5 0x00000000 0x1000>; + fsl,weim-cs-timing = < + 0x00420081 0x00000000 + 0x32260000 0x00000000 + 0x72080f00 0x00000000 + >; + clocks = <&clks IMX5_CLK_DUMMY>; + interrupt-parent = <&gpio1>; + interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + phy-mode = "mii"; + reg-io-width = <2>; + smsc,irq-push-pull; + vdd33a-supply = <&gpo2_reg>; + vddvario-supply = <&gpo2_reg>; + }; +}; + +&iomuxc { + imx51-digi-connectcore-som { + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX51_PAD_CSPI1_MISO__ECSPI1_MISO 0x185 + MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI 0x185 + MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK 0x185 + MX51_PAD_CSPI1_SS0__GPIO4_24 0x85 /* CS0 */ + >; + }; + + pinctrl_esdhc2: esdhc2grp { + fsl,pins = < + MX51_PAD_SD2_CMD__SD2_CMD 0x400020d5 + MX51_PAD_SD2_CLK__SD2_CLK 0x20d5 + MX51_PAD_SD2_DATA0__SD2_DATA0 0x20d5 + MX51_PAD_SD2_DATA1__SD2_DATA1 0x20d5 + MX51_PAD_SD2_DATA2__SD2_DATA2 0x20d5 + MX51_PAD_SD2_DATA3__SD2_DATA3 0x20d5 + >; + }; + + pinctrl_fec: fecgrp { + fsl,pins = < + MX51_PAD_DI_GP3__FEC_TX_ER 0x80000000 + MX51_PAD_DI2_PIN4__FEC_CRS 0x80000000 + MX51_PAD_DI2_PIN2__FEC_MDC 0x80000000 + MX51_PAD_DI2_PIN3__FEC_MDIO 0x80000000 + MX51_PAD_DI2_DISP_CLK__FEC_RDATA1 0x80000000 + MX51_PAD_DI_GP4__FEC_RDATA2 0x80000000 + MX51_PAD_DISP2_DAT0__FEC_RDATA3 0x80000000 + MX51_PAD_DISP2_DAT1__FEC_RX_ER 0x80000000 + MX51_PAD_DISP2_DAT6__FEC_TDATA1 0x80000000 + MX51_PAD_DISP2_DAT7__FEC_TDATA2 0x80000000 + MX51_PAD_DISP2_DAT8__FEC_TDATA3 0x80000000 + MX51_PAD_DISP2_DAT9__FEC_TX_EN 0x80000000 + MX51_PAD_DISP2_DAT10__FEC_COL 0x80000000 + MX51_PAD_DISP2_DAT11__FEC_RX_CLK 0x80000000 + MX51_PAD_DISP2_DAT12__FEC_RX_DV 0x80000000 + MX51_PAD_DISP2_DAT13__FEC_TX_CLK 0x80000000 + MX51_PAD_DISP2_DAT14__FEC_RDATA0 0x80000000 + MX51_PAD_DISP2_DAT15__FEC_TDATA0 0x80000000 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX51_PAD_GPIO1_2__I2C2_SCL 0x400001ed + MX51_PAD_GPIO1_3__I2C2_SDA 0x400001ed + >; + }; + + pinctrl_nfc: nfcgrp { + fsl,pins = < + MX51_PAD_NANDF_D0__NANDF_D0 0x80000000 + MX51_PAD_NANDF_D1__NANDF_D1 0x80000000 + MX51_PAD_NANDF_D2__NANDF_D2 0x80000000 + MX51_PAD_NANDF_D3__NANDF_D3 0x80000000 + MX51_PAD_NANDF_D4__NANDF_D4 0x80000000 + MX51_PAD_NANDF_D5__NANDF_D5 0x80000000 + MX51_PAD_NANDF_D6__NANDF_D6 0x80000000 + MX51_PAD_NANDF_D7__NANDF_D7 0x80000000 + MX51_PAD_NANDF_ALE__NANDF_ALE 0x80000000 + MX51_PAD_NANDF_CLE__NANDF_CLE 0x80000000 + MX51_PAD_NANDF_RE_B__NANDF_RE_B 0x80000000 + MX51_PAD_NANDF_WE_B__NANDF_WE_B 0x80000000 + MX51_PAD_NANDF_WP_B__NANDF_WP_B 0x80000000 + MX51_PAD_NANDF_CS0__NANDF_CS0 0x80000000 + MX51_PAD_NANDF_RB0__NANDF_RB0 0x80000000 + >; + }; + + pinctrl_lan9221: lan9221grp { + fsl,pins = < + MX51_PAD_GPIO1_9__GPIO1_9 0xe5 /* IRQ */ + >; + }; + + pinctrl_mc13892: mc13892grp { + fsl,pins = < + MX51_PAD_GPIO1_5__GPIO1_5 0xe5 /* IRQ */ + >; + }; + + pinctrl_mma7455l: mma7455lgrp { + fsl,pins = < + MX51_PAD_GPIO1_7__GPIO1_7 0xe5 /* IRQ1 */ + MX51_PAD_GPIO1_6__GPIO1_6 0xe5 /* IRQ2 */ + >; + }; + + pinctrl_weim: weimgrp { + fsl,pins = < + MX51_PAD_EIM_DA0__EIM_DA0 0x80000000 + MX51_PAD_EIM_DA1__EIM_DA1 0x80000000 + MX51_PAD_EIM_DA2__EIM_DA2 0x80000000 + MX51_PAD_EIM_DA3__EIM_DA3 0x80000000 + MX51_PAD_EIM_DA4__EIM_DA4 0x80000000 + MX51_PAD_EIM_DA5__EIM_DA5 0x80000000 + MX51_PAD_EIM_DA6__EIM_DA6 0x80000000 + MX51_PAD_EIM_DA7__EIM_DA7 0x80000000 + MX51_PAD_EIM_DA8__EIM_DA8 0x80000000 + MX51_PAD_EIM_DA9__EIM_DA9 0x80000000 + MX51_PAD_EIM_DA10__EIM_DA10 0x80000000 + MX51_PAD_EIM_DA11__EIM_DA11 0x80000000 + MX51_PAD_EIM_DA12__EIM_DA12 0x80000000 + MX51_PAD_EIM_DA13__EIM_DA13 0x80000000 + MX51_PAD_EIM_DA14__EIM_DA14 0x80000000 + MX51_PAD_EIM_DA15__EIM_DA15 0x80000000 + MX51_PAD_EIM_A16__EIM_A16 0x80000000 + MX51_PAD_EIM_A17__EIM_A17 0x80000000 + MX51_PAD_EIM_A18__EIM_A18 0x80000000 + MX51_PAD_EIM_A19__EIM_A19 0x80000000 + MX51_PAD_EIM_A20__EIM_A20 0x80000000 + MX51_PAD_EIM_A21__EIM_A21 0x80000000 + MX51_PAD_EIM_A22__EIM_A22 0x80000000 + MX51_PAD_EIM_A23__EIM_A23 0x80000000 + MX51_PAD_EIM_A24__EIM_A24 0x80000000 + MX51_PAD_EIM_A25__EIM_A25 0x80000000 + MX51_PAD_EIM_A26__EIM_A26 0x80000000 + MX51_PAD_EIM_A27__EIM_A27 0x80000000 + MX51_PAD_EIM_D16__EIM_D16 0x80000000 + MX51_PAD_EIM_D17__EIM_D17 0x80000000 + MX51_PAD_EIM_D18__EIM_D18 0x80000000 + MX51_PAD_EIM_D19__EIM_D19 0x80000000 + MX51_PAD_EIM_D20__EIM_D20 0x80000000 + MX51_PAD_EIM_D21__EIM_D21 0x80000000 + MX51_PAD_EIM_D22__EIM_D22 0x80000000 + MX51_PAD_EIM_D23__EIM_D23 0x80000000 + MX51_PAD_EIM_D24__EIM_D24 0x80000000 + MX51_PAD_EIM_D25__EIM_D25 0x80000000 + MX51_PAD_EIM_D26__EIM_D26 0x80000000 + MX51_PAD_EIM_D27__EIM_D27 0x80000000 + MX51_PAD_EIM_D28__EIM_D28 0x80000000 + MX51_PAD_EIM_D29__EIM_D29 0x80000000 + MX51_PAD_EIM_D30__EIM_D30 0x80000000 + MX51_PAD_EIM_D31__EIM_D31 0x80000000 + MX51_PAD_EIM_OE__EIM_OE 0x80000000 + MX51_PAD_EIM_DTACK__EIM_DTACK 0x80000000 + MX51_PAD_EIM_LBA__EIM_LBA 0x80000000 + MX51_PAD_EIM_CS5__EIM_CS5 0x80000000 /* CS5 */ + >; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx51-eukrea-cpuimx51.dtsi b/arch/arm/boot/dts/imx51-eukrea-cpuimx51.dtsi index 9b3acf6e4282..63164266af83 100644 --- a/arch/arm/boot/dts/imx51-eukrea-cpuimx51.dtsi +++ b/arch/arm/boot/dts/imx51-eukrea-cpuimx51.dtsi @@ -42,6 +42,17 @@ compatible = "nxp,pcf8563"; reg = <0x51>; }; + + tsc2007: tsc2007@49 { + compatible = "ti,tsc2007"; + gpios = <&gpio4 0 1>; + interrupt-parent = <&gpio4>; + interrupts = <0x0 0x8>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tsc2007_1>; + reg = <0x49>; + ti,x-plate-ohms = <180>; + }; }; &iomuxc { diff --git a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts index 5cec4f322096..75e66c9c6144 100644 --- a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts +++ b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts @@ -24,6 +24,14 @@ model = "Eukrea CPUIMX51"; compatible = "eukrea,mbimxsd51","eukrea,cpuimx51", "fsl,imx51"; + clocks { + clk24M: can_clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + }; + }; + gpio_keys { compatible = "gpio-keys"; pinctrl-names = "default"; @@ -50,6 +58,23 @@ }; }; + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_can: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "CAN_RST"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>; + startup-delay-us = <20000>; + enable-active-high; + }; + }; + sound { compatible = "eukrea,asoc-tlv320"; eukrea,model = "imx51-eukrea-tlv320aic23"; @@ -57,6 +82,20 @@ fsl,mux-int-port = <2>; fsl,mux-ext-port = <3>; }; + + usbphy { + #address-cells = <1>; + #size-cells = <0>; + compatible = "simple-bus"; + + usbh1phy: usbh1phy@0 { + compatible = "usb-nop-xceiv"; + reg = <0>; + clocks = <&clks IMX5_CLK_USB_PHY_GATE>; + clock-names = "main_clk"; + clock-frequency = <19200000>; + }; + }; }; &audmux { @@ -72,6 +111,26 @@ status = "okay"; }; +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + fsl,spi-num-chipselects = <1>; + cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>; + status = "okay"; + + can0: can@0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can>; + compatible = "microchip,mcp2515"; + reg = <0>; + clocks = <&clk24M>; + spi-max-frequency = <10000000>; + interrupt-parent = <&gpio1>; + interrupts = <1 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <®_can>; + }; +}; + &i2c1 { tlv320aic23: codec@1a { compatible = "ti,tlv320aic23"; @@ -90,6 +149,23 @@ >; }; + + pinctrl_can: cangrp { + fsl,pins = < + MX51_PAD_CSI2_PIXCLK__GPIO4_15 0x80000000 /* nReset */ + MX51_PAD_GPIO1_1__GPIO1_1 0x80000000 /* IRQ */ + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX51_PAD_CSPI1_MISO__ECSPI1_MISO 0x185 + MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI 0x185 + MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK 0x185 + MX51_PAD_CSPI1_SS0__GPIO4_24 0x80000000 /* CS0 */ + >; + }; + pinctrl_esdhc1: esdhc1grp { fsl,pins = < MX51_PAD_SD1_CMD__SD1_CMD 0x400020d5 @@ -151,6 +227,29 @@ MX51_PAD_CSI1_D9__GPIO3_13 0x1f5 >; }; + + pinctrl_usbh1: usbh1grp { + fsl,pins = < + MX51_PAD_USBH1_CLK__USBH1_CLK 0x1e5 + MX51_PAD_USBH1_DIR__USBH1_DIR 0x1e5 + MX51_PAD_USBH1_NXT__USBH1_NXT 0x1e5 + MX51_PAD_USBH1_DATA0__USBH1_DATA0 0x1e5 + MX51_PAD_USBH1_DATA1__USBH1_DATA1 0x1e5 + MX51_PAD_USBH1_DATA2__USBH1_DATA2 0x1e5 + MX51_PAD_USBH1_DATA3__USBH1_DATA3 0x1e5 + MX51_PAD_USBH1_DATA4__USBH1_DATA4 0x1e5 + MX51_PAD_USBH1_DATA5__USBH1_DATA5 0x1e5 + MX51_PAD_USBH1_DATA6__USBH1_DATA6 0x1e5 + MX51_PAD_USBH1_DATA7__USBH1_DATA7 0x1e5 + MX51_PAD_USBH1_STP__USBH1_STP 0x1e5 + >; + }; + + pinctrl_usbh1_vbus: usbh1-vbusgrp { + fsl,pins = < + MX51_PAD_EIM_CS3__GPIO2_28 0x1f5 + >; + }; }; }; @@ -173,3 +272,24 @@ fsl,uart-has-rtscts; status = "okay"; }; + +&usbh1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1>; + fsl,usbphy = <&usbh1phy>; + dr_mode = "host"; + phy_type = "ulpi"; + status = "okay"; +}; + +&usbotg { + dr_mode = "otg"; + phy_type = "utmi_wide"; + status = "okay"; +}; + +&usbphy0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1_vbus>; + reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; +}; diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index 150bb4e2f744..bebbf3ba0d5e 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -19,6 +19,7 @@ / { aliases { + ethernet0 = &fec; gpio0 = &gpio1; gpio1 = &gpio2; gpio2 = &gpio3; @@ -537,6 +538,8 @@ }; nfc: nand@83fdb000 { + #address-cells = <1>; + #size-cells = <1>; compatible = "fsl,imx51-nand"; reg = <0x83fdb000 0x1000 0xcfff0000 0x10000>; interrupts = <8>; diff --git a/arch/arm/boot/dts/imx53-mba53.dts b/arch/arm/boot/dts/imx53-mba53.dts index a3431d784870..3e3f17aa93a1 100644 --- a/arch/arm/boot/dts/imx53-mba53.dts +++ b/arch/arm/boot/dts/imx53-mba53.dts @@ -17,6 +17,10 @@ model = "TQ MBa53 starter kit"; compatible = "tq,mba53", "tq,tqma53", "fsl,imx53"; + chosen { + stdout-path = &uart2; + }; + backlight { compatible = "pwm-backlight"; pwms = <&pwm2 0 50000>; diff --git a/arch/arm/boot/dts/imx53-qsb-common.dtsi b/arch/arm/boot/dts/imx53-qsb-common.dtsi index ede04fa4161f..fd8c60dde7de 100644 --- a/arch/arm/boot/dts/imx53-qsb-common.dtsi +++ b/arch/arm/boot/dts/imx53-qsb-common.dtsi @@ -13,6 +13,10 @@ #include "imx53.dtsi" / { + chosen { + stdout-path = &uart1; + }; + memory { reg = <0x70000000 0x20000000>, <0xb0000000 0x20000000>; @@ -272,6 +276,14 @@ >; }; + pinctrl_vga_sync: vgasync-grp { + fsl,pins = < + /* VGA_HSYNC, VSYNC with max drive strength */ + MX53_PAD_EIM_OE__IPU_DI1_PIN7 0xe6 + MX53_PAD_EIM_RW__IPU_DI1_PIN8 0xe6 + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX53_PAD_CSI0_DAT10__UART1_TXD_MUX 0x1e4 @@ -281,6 +293,15 @@ }; }; +&tve { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_vga_sync>; + fsl,tve-mode = "vga"; + fsl,hsync-pin = <4>; + fsl,vsync-pin = <6>; + status = "okay"; +}; + &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index 6a1bf4ff83d5..6456a0084388 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -18,6 +18,7 @@ / { aliases { + ethernet0 = &fec; gpio0 = &gpio1; gpio1 = &gpio2; gpio2 = &gpio3; @@ -726,8 +727,8 @@ clocks = <&clks IMX5_CLK_VPU_GATE>, <&clks IMX5_CLK_VPU_GATE>; clock-names = "per", "ahb"; + resets = <&src 1>; iram = <&ocram>; - status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/imx6dl-hummingboard.dts b/arch/arm/boot/dts/imx6dl-hummingboard.dts index 5bfae54fb780..5373a5f2782b 100644 --- a/arch/arm/boot/dts/imx6dl-hummingboard.dts +++ b/arch/arm/boot/dts/imx6dl-hummingboard.dts @@ -11,6 +11,10 @@ model = "SolidRun HummingBoard DL/Solo"; compatible = "solidrun,hummingboard", "fsl,imx6dl"; + chosen { + stdout-path = &uart1; + }; + ir_recv: ir-receiver { compatible = "gpio-ir-receiver"; gpios = <&gpio1 2 1>; @@ -67,6 +71,13 @@ status = "okay"; }; +&hdmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard_hdmi>; + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + &i2c1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hummingboard_i2c1>; @@ -82,6 +93,13 @@ */ }; +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard_i2c2>; + status = "okay"; +}; + &iomuxc { hummingboard { pinctrl_hummingboard_flexcan1: hummingboard-flexcan1 { @@ -97,6 +115,12 @@ >; }; + pinctrl_hummingboard_hdmi: hummingboard-hdmi { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0 + >; + }; + pinctrl_hummingboard_i2c1: hummingboard-i2c1 { fsl,pins = < MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 @@ -104,6 +128,13 @@ >; }; + pinctrl_hummingboard_i2c2: hummingboard-i2c2 { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + pinctrl_hummingboard_spdif: hummingboard-spdif { fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>; }; diff --git a/arch/arm/boot/dts/imx6dl-phytec-pbab01.dts b/arch/arm/boot/dts/imx6dl-phytec-pbab01.dts new file mode 100644 index 000000000000..08e97801494e --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-phytec-pbab01.dts @@ -0,0 +1,19 @@ +/* + * Copyright 2013 Christian Hemp, Phytec Messtechnik GmbH + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +#include "imx6dl-phytec-pfla02.dtsi" +#include "imx6qdl-phytec-pbab01.dtsi" + +/ { + model = "Phytec phyFLEX-i.MX6 DualLite/Solo Carrier-Board"; + compatible = "phytec,imx6dl-pbab01", "phytec,imx6dl-pfla02", "fsl,imx6dl"; +}; diff --git a/arch/arm/boot/dts/imx6dl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6dl-phytec-pfla02.dtsi new file mode 100644 index 000000000000..964bc2ad3c5d --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-phytec-pfla02.dtsi @@ -0,0 +1,22 @@ +/* + * Copyright 2013 Christian Hemp, Phytec Messtechnik GmbH + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include "imx6dl.dtsi" +#include "imx6qdl-phytec-pfla02.dtsi" + +/ { + model = "Phytec phyFLEX-i.MX6 DualLite/Solo"; + compatible = "phytec,imx6dl-pfla02", "fsl,imx6dl"; + + memory { + reg = <0x10000000 0x20000000>; + }; +}; diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts new file mode 100644 index 000000000000..909fafc0b650 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-riotboard.dts @@ -0,0 +1,539 @@ +/* + * Copyright 2014 Iain Paton <ipaton0@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +/dts-v1/; +#include "imx6dl.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "RIoTboard i.MX6S"; + compatible = "riot,imx6s-riotboard", "fsl,imx6dl"; + + memory { + reg = <0x10000000 0x40000000>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_2p5v: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "2P5V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + }; + + reg_3p3v: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_usb_otg_vbus: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 0>; + enable-active-high; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_led>; + + led0: user1 { + label = "user1"; + gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; + default-state = "on"; + linux,default-trigger = "heartbeat"; + }; + + led1: user2 { + label = "user2"; + gpios = <&gpio3 28 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + }; + + sound { + compatible = "fsl,imx-audio-sgtl5000"; + model = "imx6-riotboard-sgtl5000"; + ssi-controller = <&ssi1>; + audio-codec = <&codec>; + audio-routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + mux-int-port = <1>; + mux-ext-port = <3>; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "okay"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii"; + phy-reset-gpios = <&gpio3 31 0>; + interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, + <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + codec: sgtl5000@0a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + clocks = <&clks 201>; + VDDA-supply = <®_2p5v>; + VDDIO-supply = <®_3p3v>; + }; + + pmic: pf0100@08 { + compatible = "fsl,pfuze100"; + reg = <0x08>; + interrupt-parent = <&gpio5>; + interrupts = <16 8>; + + regulators { + reg_vddcore: sw1ab { /* VDDARM_IN */ + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-always-on; + }; + + reg_vddsoc: sw1c { /* VDDSOC_IN */ + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-always-on; + }; + + reg_gen_3v3: sw2 { /* VDDHIGH_IN */ + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_ddr_1v5a: sw3a { /* NVCC_DRAM, NVCC_RGMII */ + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-always-on; + }; + + reg_ddr_1v5b: sw3b { /* NVCC_DRAM, NVCC_RGMII */ + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-always-on; + }; + + reg_ddr_vtt: sw4 { /* MIPI conn */ + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-always-on; + }; + + reg_5v_600mA: swbst { /* not used */ + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + reg_snvs_3v: vsnvs { /* VDD_SNVS_IN */ + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + + vref_reg: vrefddr { /* VREF_DDR */ + regulator-boot-on; + regulator-always-on; + }; + + reg_vgen1_1v5: vgen1 { /* not used */ + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + reg_vgen2_1v2_eth: vgen2 { /* pcie ? */ + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + regulator-always-on; + }; + + reg_vgen3_2v8: vgen3 { /* not used */ + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + reg_vgen4_1v8: vgen4 { /* NVCC_SD3 */ + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_vgen5_2v5_sgtl: vgen5 { /* Pwr LED & 5V0_delayed enable */ + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_vgen6_3v3: vgen6 { /* #V#_DELAYED enable, MIPI */ + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&i2c4 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + clocks = <&clks 116>; + status = "okay"; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; + status = "okay"; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; + status = "okay"; +}; + +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; + status = "okay"; +}; + +&ssi1 { + fsl,mode = "i2s-slave"; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "okay"; +}; + +&usbh1 { + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + dr_mode = "otg"; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + cd-gpios = <&gpio1 4 0>; + wp-gpios = <&gpio1 2 0>; + vmmc-supply = <®_3p3v>; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + cd-gpios = <&gpio7 0 0>; + wp-gpios = <&gpio7 1 0>; + vmmc-supply = <®_3p3v>; + status = "okay"; +}; + +&usdhc4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc4>; + vmmc-supply = <®_3p3v>; + non-removable; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + + imx6-riotboard { + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x8000000 + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x8000000 + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x8000000 + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x8000000 + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* CAM_MCLK */ + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 + MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 + MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 + MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x000b1 /* CS0 */ + >; + }; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09 0x000b1 /* CS1 */ + MX6QDL_PAD_DISP0_DAT16__ECSPI2_MOSI 0x100b1 + MX6QDL_PAD_DISP0_DAT17__ECSPI2_MISO 0x100b1 + MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x000b1 /* CS0 */ + MX6QDL_PAD_DISP0_DAT19__ECSPI2_SCLK 0x100b1 + >; + }; + + pinctrl_ecspi3: ecspi3grp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1 + MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1 + MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1 + MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x000b1 /* CS0 */ + MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25 0x000b1 /* CS1 */ + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x80000000 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x0a0b1 /* AR8035 CLK_25M --> ENET_REF_CLK (V22) */ + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 /* AR8035 pin strapping: IO voltage: pull up */ + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x130b0 /* AR8035 pin strapping: PHYADDR#0: pull down */ + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x130b0 /* AR8035 pin strapping: PHYADDR#1: pull down */ + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 /* AR8035 pin strapping: MODE#1: pull up */ + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 /* AR8035 pin strapping: MODE#3: pull up */ + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x130b0 /* AR8035 pin strapping: MODE#0: pull down */ + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0xc0000000 /* GPIO16 -> AR8035 25MHz */ + MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x130b0 /* RGMII_nRST */ + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x80000000 /* AR8035 interrupt */ + MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 + MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX6QDL_PAD_GPIO_7__I2C4_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_8__I2C4_SDA 0x4001b8b1 + >; + }; + + pinctrl_led: ledgrp { + fsl,pins = < + MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x80000000 /* user led0 */ + MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x80000000 /* user led1 */ + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm2: pwm2grp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT9__PWM2_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm4: pwm4grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* MX6QDL_PAD_EIM_D22__USB_OTG_PWR */ + MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x80000000 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x80000000 /* SD2 CD */ + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* SD2 WP */ + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x80000000 /* SD3 CD */ + MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x80000000 /* SD3 WP */ + >; + }; + + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 + MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x80000000 /* SD4 RST (eMMC) */ + >; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi index 5c5f574330f9..0a9c49d69d41 100644 --- a/arch/arm/boot/dts/imx6dl.dtsi +++ b/arch/arm/boot/dts/imx6dl.dtsi @@ -84,9 +84,10 @@ i2c4: i2c@021f8000 { #address-cells = <1>; #size-cells = <0>; - compatible = "fsl,imx1-i2c"; + compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c"; reg = <0x021f8000 0x4000>; interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks 116>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts index e4ae38fd0269..e0302636aff5 100644 --- a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts +++ b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts @@ -18,6 +18,10 @@ model = "Data Modul eDM-QMX6 Board"; compatible = "dmo,imx6q-edmqmx6", "fsl,imx6q"; + chosen { + stdout-path = &uart2; + }; + aliases { gpio7 = &stmpe_gpio1; gpio8 = &stmpe_gpio2; @@ -91,6 +95,20 @@ }; }; +&ecspi5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi5>; + fsl,spi-num-chipselects = <1>; + cs-gpios = <&gpio1 12 0>; + status = "okay"; + + flash: m25p80@0 { + compatible = "m25p80"; + spi-max-frequency = <40000000>; + reg = <0>; + }; +}; + &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; @@ -105,7 +123,8 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2 &pinctrl_stmpe1 - &pinctrl_stmpe2>; + &pinctrl_stmpe2 + &pinctrl_pfuze>; status = "okay"; pmic: pfuze100@08 { @@ -216,6 +235,8 @@ reg = <0x40>; interrupts = <30 0>; interrupt-parent = <&gpio3>; + vcc-supply = <&sw2_reg>; + vio-supply = <&sw2_reg>; stmpe_gpio1: stmpe_gpio { #gpio-cells = <2>; @@ -228,6 +249,8 @@ reg = <0x44>; interrupts = <2 0>; interrupt-parent = <&gpio5>; + vcc-supply = <&sw2_reg>; + vio-supply = <&sw2_reg>; stmpe_gpio2: stmpe_gpio { #gpio-cells = <2>; @@ -263,6 +286,15 @@ >; }; + pinctrl_ecspi5: ecspi5rp-1 { + fsl,pins = < + MX6QDL_PAD_SD1_DAT0__ECSPI5_MISO 0x80000000 + MX6QDL_PAD_SD1_CMD__ECSPI5_MOSI 0x80000000 + MX6QDL_PAD_SD1_CLK__ECSPI5_SCLK 0x80000000 + MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x80000000 + >; + }; + pinctrl_enet: enetgrp { fsl,pins = < MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 @@ -291,6 +323,12 @@ >; }; + pinctrl_pfuze: pfuze100grp1 { + fsl,pins = < + MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x80000000 + >; + }; + pinctrl_stmpe1: stmpe1grp { fsl,pins = <MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x80000000>; }; diff --git a/arch/arm/boot/dts/imx6q-gk802.dts b/arch/arm/boot/dts/imx6q-gk802.dts index 4a9b4dc9afc0..703539cf36d3 100644 --- a/arch/arm/boot/dts/imx6q-gk802.dts +++ b/arch/arm/boot/dts/imx6q-gk802.dts @@ -14,7 +14,7 @@ compatible = "zealz,imx6q-gk802", "fsl,imx6q"; chosen { - linux,stdout-path = &uart4; + stdout-path = &uart4; }; memory { @@ -48,6 +48,11 @@ }; }; +&hdmi { + ddc-i2c-bus = <&i2c3>; + status = "okay"; +}; + /* Internal I2C */ &i2c2 { pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/imx6q-gw5400-a.dts b/arch/arm/boot/dts/imx6q-gw5400-a.dts index e51bb3f0fd56..3689eaa58826 100644 --- a/arch/arm/boot/dts/imx6q-gw5400-a.dts +++ b/arch/arm/boot/dts/imx6q-gw5400-a.dts @@ -157,6 +157,11 @@ status = "okay"; }; +&hdmi { + ddc-i2c-bus = <&i2c3>; + status = "okay"; +}; + &i2c1 { clock-frequency = <100000>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/imx6q-phytec-pbab01.dts b/arch/arm/boot/dts/imx6q-phytec-pbab01.dts index 5607c331fca8..c139ac0ebe15 100644 --- a/arch/arm/boot/dts/imx6q-phytec-pbab01.dts +++ b/arch/arm/boot/dts/imx6q-phytec-pbab01.dts @@ -11,40 +11,17 @@ /dts-v1/; #include "imx6q-phytec-pfla02.dtsi" +#include "imx6qdl-phytec-pbab01.dtsi" / { model = "Phytec phyFLEX-i.MX6 Quad Carrier-Board"; compatible = "phytec,imx6q-pbab01", "phytec,imx6q-pfla02", "fsl,imx6q"; -}; - -&fec { - status = "okay"; -}; -&gpmi { - status = "okay"; + chosen { + stdout-path = &uart4; + }; }; &sata { - status = "okay"; -}; - -&uart4 { - status = "okay"; -}; - -&usbh1 { - status = "okay"; -}; - -&usbotg { - status = "okay"; -}; - -&usdhc2 { - status = "okay"; -}; - -&usdhc3 { - status = "okay"; + status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi index 324f1550976b..cd20d0a948de 100644 --- a/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi +++ b/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi @@ -10,316 +10,13 @@ */ #include "imx6q.dtsi" +#include "imx6qdl-phytec-pfla02.dtsi" / { - model = "Phytec phyFLEX-i.MX6 Ouad"; + model = "Phytec phyFLEX-i.MX6 Quad"; compatible = "phytec,imx6q-pfla02", "fsl,imx6q"; memory { reg = <0x10000000 0x80000000>; }; - - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - reg_usb_otg_vbus: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "usb_otg_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio4 15 0>; - }; - - reg_usb_h1_vbus: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "usb_h1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio1 0 0>; - }; - }; -}; - -&ecspi3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ecspi3>; - status = "okay"; - fsl,spi-num-chipselects = <1>; - cs-gpios = <&gpio4 24 0>; - - flash@0 { - compatible = "m25p80"; - spi-max-frequency = <20000000>; - reg = <0>; - }; -}; - -&i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c1>; - status = "okay"; - - eeprom@50 { - compatible = "atmel,24c32"; - reg = <0x50>; - }; - - pmic@58 { - compatible = "dialog,da9063"; - reg = <0x58>; - interrupt-parent = <&gpio4>; - interrupts = <17 0x8>; /* active-low GPIO4_17 */ - - regulators { - vddcore_reg: bcore1 { - regulator-min-microvolt = <730000>; - regulator-max-microvolt = <1380000>; - regulator-always-on; - }; - - vddsoc_reg: bcore2 { - regulator-min-microvolt = <730000>; - regulator-max-microvolt = <1380000>; - regulator-always-on; - }; - - vdd_ddr3_reg: bpro { - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - }; - - vdd_3v3_reg: bperi { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vdd_buckmem_reg: bmem { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vdd_eth_reg: bio { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - }; - - vdd_eth_io_reg: ldo4 { - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; - regulator-always-on; - }; - - vdd_mx6_snvs_reg: ldo5 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-always-on; - }; - - vdd_3v3_pmic_io_reg: ldo6 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vdd_sd0_reg: ldo9 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - vdd_sd1_reg: ldo10 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - vdd_mx6_high_reg: ldo11 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-always-on; - }; - }; - }; -}; - -&iomuxc { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hog>; - - imx6q-phytec-pfla02 { - pinctrl_hog: hoggrp { - fsl,pins = < - MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x80000000 - MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x80000000 /* SPI NOR chipselect */ - MX6QDL_PAD_DI0_PIN15__GPIO4_IO17 0x80000000 /* PMIC interrupt */ - >; - }; - - pinctrl_ecspi3: ecspi3grp { - fsl,pins = < - MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1 - MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1 - MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1 - >; - }; - - pinctrl_enet: enetgrp { - fsl,pins = < - MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 - MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 - MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 - MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 - MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 - MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 - MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 - MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 - MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 - MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 - MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 - MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 - MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 - MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 - MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 - MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0 - >; - }; - - pinctrl_gpmi_nand: gpminandgrp { - fsl,pins = < - MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 - MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 - MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 - MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 - MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 - MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1 - MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 - MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 - MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 - MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 - MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 - MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 - MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 - MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 - MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 - MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 - MX6QDL_PAD_SD4_DAT0__NAND_DQS 0x00b1 - >; - }; - - pinctrl_i2c1: i2c1grp { - fsl,pins = < - MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 - MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 - >; - }; - - pinctrl_uart4: uart4grp { - fsl,pins = < - MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 - MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 - >; - }; - - pinctrl_usbh1: usbh1grp { - fsl,pins = < - MX6QDL_PAD_GPIO_0__USB_H1_PWR 0x80000000 - >; - }; - - pinctrl_usbotg: usbotggrp { - fsl,pins = < - MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 - MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0 - MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x80000000 - >; - }; - - pinctrl_usdhc2: usdhc2grp { - fsl,pins = < - MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 - MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 - MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 - MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 - MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 - MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 - >; - }; - - pinctrl_usdhc3: usdhc3grp { - fsl,pins = < - MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 - MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 - MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 - MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 - MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 - MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 - >; - }; - - pinctrl_usdhc3_cdwp: usdhc3cdwp { - fsl,pins = < - MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x80000000 - MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 - >; - }; - }; -}; - -&fec { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet>; - phy-mode = "rgmii"; - phy-reset-gpios = <&gpio3 23 0>; - status = "disabled"; -}; - -&gpmi { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpmi_nand>; - nand-on-flash-bbt; - status = "disabled"; -}; - -&uart4 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart4>; - status = "disabled"; -}; - -&usbh1 { - vbus-supply = <®_usb_h1_vbus>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbh1>; - status = "disabled"; -}; - -&usbotg { - vbus-supply = <®_usb_otg_vbus>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbotg>; - disable-over-current; - status = "disabled"; -}; - -&usdhc2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc2>; - cd-gpios = <&gpio1 4 0>; - wp-gpios = <&gpio1 2 0>; - status = "disabled"; -}; - -&usdhc3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc3 - &pinctrl_usdhc3_cdwp>; - cd-gpios = <&gpio1 27 0>; - wp-gpios = <&gpio1 29 0>; - status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6q-udoo.dts b/arch/arm/boot/dts/imx6q-udoo.dts index ed397d149ab6..6c561060bf5c 100644 --- a/arch/arm/boot/dts/imx6q-udoo.dts +++ b/arch/arm/boot/dts/imx6q-udoo.dts @@ -16,6 +16,10 @@ model = "Udoo i.MX6 Quad Board"; compatible = "udoo,imx6q-udoo", "fsl,imx6q"; + chosen { + stdout-path = &uart2; + }; + memory { reg = <0x10000000 0x40000000>; }; @@ -28,6 +32,18 @@ status = "okay"; }; +&hdmi { + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + &iomuxc { imx6q-udoo { pinctrl_enet: enetgrp { @@ -51,6 +67,13 @@ >; }; + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + pinctrl_uart2: uart2grp { fsl,pins = < MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 diff --git a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi index c2a24888a276..25da82a03110 100644 --- a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi +++ b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi @@ -55,6 +55,20 @@ }; }; +&hdmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_cubox_i_hdmi>; + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_cubox_i_i2c2>; + status = "okay"; +}; + &i2c3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_cubox_i_i2c3>; @@ -69,6 +83,19 @@ &iomuxc { cubox_i { + pinctrl_cubox_i_hdmi: cubox-i-hdmi { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0 + >; + }; + + pinctrl_cubox_i_i2c2: cubox-i-i2c2 { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + pinctrl_cubox_i_i2c3: cubox-i-i2c3 { fsl,pins = < MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1 diff --git a/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi b/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi index 25cf035dd36e..2c253d6d20bd 100644 --- a/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi +++ b/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi @@ -22,7 +22,7 @@ }; chosen { - linux,stdout-path = &uart1; + stdout-path = &uart1; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi index 98a422153ce7..31665adcbf39 100644 --- a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi @@ -101,6 +101,11 @@ status = "okay"; }; +&hdmi { + ddc-i2c-bus = <&i2c3>; + status = "okay"; +}; + &i2c1 { clock-frequency = <100000>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi index 035d3a85c318..367af3ec9435 100644 --- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi @@ -27,6 +27,13 @@ bootargs = "console=ttymxc1,115200"; }; + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm4 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <7>; + }; + leds { compatible = "gpio-leds"; @@ -148,6 +155,11 @@ status = "okay"; }; +&hdmi { + ddc-i2c-bus = <&i2c3>; + status = "okay"; +}; + &i2c1 { clock-frequency = <100000>; pinctrl-names = "default"; @@ -394,6 +406,12 @@ >; }; + pinctrl_pwm4: pwm4grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 @@ -436,6 +454,27 @@ &ldb { status = "okay"; + + lvds-channel@0 { + fsl,data-mapping = "spwg"; + fsl,data-width = <18>; + status = "okay"; + + display-timings { + native-mode = <&timing0>; + timing0: hsd100pxn1 { + clock-frequency = <65000000>; + hactive = <1024>; + vactive = <768>; + hback-porch = <220>; + hfront-porch = <40>; + vback-porch = <21>; + vfront-porch = <7>; + hsync-len = <60>; + vsync-len = <10>; + }; + }; + }; }; &pcie { @@ -443,6 +482,12 @@ status = "okay"; }; +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; + status = "okay"; +}; + &ssi1 { fsl,mode = "i2s-slave"; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi index c8e5ae06deaf..c91b5a6c769b 100644 --- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi @@ -30,6 +30,13 @@ bootargs = "console=ttymxc1,115200"; }; + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm4 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <7>; + }; + leds { compatible = "gpio-leds"; @@ -157,6 +164,11 @@ status = "okay"; }; +&hdmi { + ddc-i2c-bus = <&i2c3>; + status = "okay"; +}; + &i2c1 { clock-frequency = <100000>; pinctrl-names = "default"; @@ -434,6 +446,12 @@ >; }; + pinctrl_pwm4: pwm4grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 @@ -508,6 +526,12 @@ }; }; +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; + status = "okay"; +}; + &ssi1 { fsl,mode = "i2s-slave"; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi index 2795dfc8c926..698d3063b295 100644 --- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi @@ -30,6 +30,13 @@ bootargs = "console=ttymxc1,115200"; }; + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm4 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <7>; + }; + leds { compatible = "gpio-leds"; @@ -147,6 +154,11 @@ status = "okay"; }; +&hdmi { + ddc-i2c-bus = <&i2c3>; + status = "okay"; +}; + &i2c1 { clock-frequency = <100000>; pinctrl-names = "default"; @@ -456,6 +468,12 @@ >; }; + pinctrl_pwm4: pwm4grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 @@ -530,6 +548,12 @@ }; }; +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; + status = "okay"; +}; + &ssi1 { fsl,mode = "i2s-slave"; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi index 99be301b5232..4c4b17596c8b 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi @@ -14,6 +14,10 @@ #include <dt-bindings/input/input.h> / { + chosen { + stdout-path = &uart2; + }; + memory { reg = <0x10000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi new file mode 100644 index 000000000000..584721264121 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi @@ -0,0 +1,102 @@ +/* + * Copyright 2013 Christian Hemp, Phytec Messtechnik GmbH + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/ { + chosen { + linux,stdout-path = &uart4; + }; +}; + +&fec { + status = "okay"; +}; + +&gpmi { + status = "okay"; +}; + +&hdmi { + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + clock-frequency = <100000>; + status = "okay"; + + tlv320@18 { + compatible = "ti,tlv320aic3x"; + reg = <0x18>; + }; + + stmpe@41 { + compatible = "st,stmpe811"; + reg = <0x41>; + }; + + rtc@51 { + compatible = "nxp,rtc8564"; + reg = <0x51>; + }; + + adc@64 { + compatible = "maxim,max1037"; + reg = <0x64>; + }; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + clock-frequency = <100000>; + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&uart4 { + status = "okay"; +}; + +&usbh1 { + status = "okay"; +}; + +&usbotg { + status = "okay"; +}; + +&usdhc2 { + status = "okay"; +}; + +&usdhc3 { + status = "okay"; +}; + +&iomuxc { + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D16__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi new file mode 100644 index 000000000000..faa3494a69d4 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi @@ -0,0 +1,356 @@ +/* + * Copyright 2013 Christian Hemp, Phytec Messtechnik GmbH + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Phytec phyFLEX-i.MX6 Ouad"; + compatible = "phytec,imx6q-pfla02", "fsl,imx6q"; + + memory { + reg = <0x10000000 0x80000000>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_usb_otg_vbus: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio4 15 0>; + }; + + reg_usb_h1_vbus: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 0 0>; + }; + }; + + gpio_leds: leds { + compatible = "gpio-leds"; + + green { + label = "phyflex:green"; + gpios = <&gpio1 30 0>; + }; + + red { + label = "phyflex:red"; + gpios = <&gpio2 31 0>; + }; + }; +}; + +&ecspi3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi3>; + status = "okay"; + fsl,spi-num-chipselects = <1>; + cs-gpios = <&gpio4 24 0>; + + flash@0 { + compatible = "m25p80"; + spi-max-frequency = <20000000>; + reg = <0>; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c32"; + reg = <0x50>; + }; + + pmic@58 { + compatible = "dialog,da9063"; + reg = <0x58>; + interrupt-parent = <&gpio4>; + interrupts = <17 0x8>; /* active-low GPIO4_17 */ + + regulators { + vddcore_reg: bcore1 { + regulator-min-microvolt = <730000>; + regulator-max-microvolt = <1380000>; + regulator-always-on; + }; + + vddsoc_reg: bcore2 { + regulator-min-microvolt = <730000>; + regulator-max-microvolt = <1380000>; + regulator-always-on; + }; + + vdd_ddr3_reg: bpro { + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + }; + + vdd_3v3_reg: bperi { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd_buckmem_reg: bmem { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd_eth_reg: bio { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + vdd_eth_io_reg: ldo4 { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + vdd_mx6_snvs_reg: ldo5 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + + vdd_3v3_pmic_io_reg: ldo6 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd_sd0_reg: ldo9 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vdd_sd1_reg: ldo10 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vdd_mx6_high_reg: ldo11 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + }; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + imx6q-phytec-pfla02 { + pinctrl_hog: hoggrp { + fsl,pins = < + MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x80000000 + MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x80000000 /* SPI NOR chipselect */ + MX6QDL_PAD_DI0_PIN15__GPIO4_IO17 0x80000000 /* PMIC interrupt */ + MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* Green LED */ + MX6QDL_PAD_EIM_EB3__GPIO2_IO31 0x80000000 /* Red LED */ + >; + }; + + pinctrl_ecspi3: ecspi3grp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1 + MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1 + MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 + MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0 + >; + }; + + pinctrl_gpmi_nand: gpminandgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 + MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 + MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 + MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 + MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 + MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1 + MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 + MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 + MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 + MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 + MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 + MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 + MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 + MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 + MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 + MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 + MX6QDL_PAD_SD4_DAT0__NAND_DQS 0x00b1 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D30__UART3_RTS_B 0x1b0b1 + MX6QDL_PAD_EIM_D31__UART3_CTS_B 0x1b0b1 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_usbh1: usbh1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_0__USB_H1_PWR 0x80000000 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0 + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x80000000 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + >; + }; + + pinctrl_usdhc3_cdwp: usdhc3cdwp { + fsl,pins = < + MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x80000000 + MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 + >; + }; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii"; + phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>; + status = "disabled"; +}; + +&gpmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpmi_nand>; + nand-on-flash-bbt; + status = "disabled"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "disabled"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "disabled"; +}; + +&usbh1 { + vbus-supply = <®_usb_h1_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1>; + status = "disabled"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + status = "disabled"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + cd-gpios = <&gpio1 4 0>; + wp-gpios = <&gpio1 2 0>; + status = "disabled"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3 + &pinctrl_usdhc3_cdwp>; + cd-gpios = <&gpio1 27 0>; + wp-gpios = <&gpio1 29 0>; + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi index 3bec128c7971..6df6127bf835 100644 --- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi @@ -13,6 +13,10 @@ #include <dt-bindings/input/input.h> / { + chosen { + stdout-path = &uart2; + }; + memory { reg = <0x10000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi index 0d816d3be4b6..40ea36534643 100644 --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi @@ -14,6 +14,10 @@ #include <dt-bindings/input/input.h> / { + chosen { + stdout-path = &uart1; + }; + memory { reg = <0x10000000 0x40000000>; }; @@ -105,6 +109,17 @@ default-brightness-level = <7>; status = "okay"; }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + + red { + gpios = <&gpio1 2 0>; + default-state = "on"; + }; + }; }; &audmux { @@ -137,6 +152,11 @@ status = "okay"; }; +&hdmi { + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + &i2c1 { clock-frequency = <100000>; pinctrl-names = "default"; @@ -373,6 +393,12 @@ >; }; + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000 + >; + }; + pinctrl_pwm1: pwm1grp { fsl,pins = < MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1 @@ -421,6 +447,29 @@ MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 >; }; + + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 + MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059 + MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059 + MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059 + MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059 + >; + }; + }; + + gpio_leds { + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 + >; + }; }; }; @@ -449,6 +498,13 @@ }; }; +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio7 12 0>; + status = "okay"; +}; + &pwm1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; @@ -496,3 +552,12 @@ wp-gpios = <&gpio2 1 0>; status = "okay"; }; + +&usdhc4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc4>; + bus-width = <8>; + non-removable; + no-1-8-v; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi index bdfdf89d405f..5c6f10c43f65 100644 --- a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi +++ b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi @@ -62,6 +62,18 @@ status = "okay"; }; +&hdmi { + ddc-i2c-bus = <&i2c1>; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; +}; + &i2c2 { clock-frequency = <100000>; pinctrl-names = "default"; @@ -127,6 +139,13 @@ >; }; + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; + pinctrl_i2c2: i2c2grp { fsl,pins = < MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index eca0971d4db1..ce0599134a69 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -16,6 +16,7 @@ / { aliases { + ethernet0 = &fec; can0 = &can1; can1 = &can2; gpio0 = &gpio1; @@ -140,15 +141,16 @@ 0x81000000 0 0 0x01f80000 0 0x00010000 /* downstream I/O */ 0x82000000 0 0x01000000 0x01000000 0 0x00f00000>; /* non-prefetchable memory */ num-lanes = <1>; - interrupts = <0 123 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, <0 0 0 2 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, <0 0 0 3 &intc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, <0 0 0 4 &intc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks 189>, <&clks 187>, <&clks 206>, <&clks 144>; - clock-names = "pcie_ref_125m", "sata_ref_100m", "lvds_gate", "pcie_axi"; + clocks = <&clks 144>, <&clks 206>, <&clks 189>; + clock-names = "pcie", "pcie_bus", "pcie_phy"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index d26b099260a3..2d4e5285f3f3 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -14,6 +14,7 @@ / { aliases { + ethernet0 = &fec; gpio0 = &gpio1; gpio1 = &gpio2; gpio2 = &gpio3; diff --git a/arch/arm/boot/dts/k2e-evm.dts b/arch/arm/boot/dts/k2e-evm.dts index 74b3b63e94cf..c568f067604d 100644 --- a/arch/arm/boot/dts/k2e-evm.dts +++ b/arch/arm/boot/dts/k2e-evm.dts @@ -58,3 +58,84 @@ &usb1 { status = "okay"; }; + +&i2c0 { + dtt@50 { + compatible = "at,24c1024"; + reg = <0x50>; + }; +}; + +&aemif { + cs0 { + #address-cells = <2>; + #size-cells = <1>; + clock-ranges; + ranges; + + ti,cs-chipselect = <0>; + /* all timings in nanoseconds */ + ti,cs-min-turnaround-ns = <12>; + ti,cs-read-hold-ns = <6>; + ti,cs-read-strobe-ns = <23>; + ti,cs-read-setup-ns = <9>; + ti,cs-write-hold-ns = <8>; + ti,cs-write-strobe-ns = <23>; + ti,cs-write-setup-ns = <8>; + + nand@0,0 { + compatible = "ti,keystone-nand","ti,davinci-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0 0 0x4000000 + 1 0 0x0000100>; + + ti,davinci-chipselect = <0>; + ti,davinci-mask-ale = <0x2000>; + ti,davinci-mask-cle = <0x4000>; + ti,davinci-mask-chipsel = <0>; + nand-ecc-mode = "hw"; + ti,davinci-ecc-bits = <4>; + nand-on-flash-bbt; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x100000>; + read-only; + }; + + partition@100000 { + label = "params"; + reg = <0x100000 0x80000>; + read-only; + }; + + partition@180000 { + label = "ubifs"; + reg = <0x180000 0x1FE80000>; + }; + }; + }; +}; + +&spi0 { + nor_flash: n25q128a11@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "Micron,n25q128a11"; + spi-max-frequency = <54000000>; + m25p,fast-read; + reg = <0>; + + partition@0 { + label = "u-boot-spl"; + reg = <0x0 0x80000>; + read-only; + }; + + partition@1 { + label = "misc"; + reg = <0x80000 0xf80000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/k2hk-evm.dts b/arch/arm/boot/dts/k2hk-evm.dts index c93d06f9f2a8..1f90cbf27fd7 100644 --- a/arch/arm/boot/dts/k2hk-evm.dts +++ b/arch/arm/boot/dts/k2hk-evm.dts @@ -138,3 +138,32 @@ }; }; }; + +&i2c0 { + dtt@50 { + compatible = "at,24c1024"; + reg = <0x50>; + }; +}; + +&spi0 { + nor_flash: n25q128a11@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "Micron,n25q128a11"; + spi-max-frequency = <54000000>; + m25p,fast-read; + reg = <0>; + + partition@0 { + label = "u-boot-spl"; + reg = <0x0 0x80000>; + read-only; + }; + + partition@1 { + label = "misc"; + reg = <0x80000 0xf80000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/k2l-evm.dts b/arch/arm/boot/dts/k2l-evm.dts index 50a70132ac9e..fec43128a2e0 100644 --- a/arch/arm/boot/dts/k2l-evm.dts +++ b/arch/arm/boot/dts/k2l-evm.dts @@ -35,3 +35,84 @@ &usb { status = "okay"; }; + +&i2c0 { + dtt@50 { + compatible = "at,24c1024"; + reg = <0x50>; + }; +}; + +&aemif { + cs0 { + #address-cells = <2>; + #size-cells = <1>; + clock-ranges; + ranges; + + ti,cs-chipselect = <0>; + /* all timings in nanoseconds */ + ti,cs-min-turnaround-ns = <12>; + ti,cs-read-hold-ns = <6>; + ti,cs-read-strobe-ns = <23>; + ti,cs-read-setup-ns = <9>; + ti,cs-write-hold-ns = <8>; + ti,cs-write-strobe-ns = <23>; + ti,cs-write-setup-ns = <8>; + + nand@0,0 { + compatible = "ti,keystone-nand","ti,davinci-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0 0 0x4000000 + 1 0 0x0000100>; + + ti,davinci-chipselect = <0>; + ti,davinci-mask-ale = <0x2000>; + ti,davinci-mask-cle = <0x4000>; + ti,davinci-mask-chipsel = <0>; + nand-ecc-mode = "hw"; + ti,davinci-ecc-bits = <4>; + nand-on-flash-bbt; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x100000>; + read-only; + }; + + partition@100000 { + label = "params"; + reg = <0x100000 0x80000>; + read-only; + }; + + partition@180000 { + label = "ubifs"; + reg = <0x180000 0x7FE80000>; + }; + }; + }; +}; + +&spi0 { + nor_flash: n25q128a11@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "Micron,n25q128a11"; + spi-max-frequency = <54000000>; + m25p,fast-read; + reg = <0>; + + partition@0 { + label = "u-boot-spl"; + reg = <0x0 0x80000>; + read-only; + }; + + partition@1 { + label = "misc"; + reg = <0x80000 0xf80000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/keystone.dtsi b/arch/arm/boot/dts/keystone.dtsi index 90823eb90c1b..d9f99e7deb83 100644 --- a/arch/arm/boot/dts/keystone.dtsi +++ b/arch/arm/boot/dts/keystone.dtsi @@ -28,8 +28,6 @@ gic: interrupt-controller { compatible = "arm,cortex-a15-gic"; #interrupt-cells = <3>; - #size-cells = <0>; - #address-cells = <1>; interrupt-controller; reg = <0x0 0x02561000 0x0 0x1000>, <0x0 0x02562000 0x0 0x2000>, @@ -66,6 +64,7 @@ compatible = "ti,keystone","simple-bus"; interrupt-parent = <&gic>; ranges = <0x0 0x0 0x0 0xc0000000>; + dma-ranges = <0x80000000 0x8 0x00000000 0x80000000>; rstctrl: reset-controller { compatible = "ti,keystone-reset"; @@ -102,11 +101,6 @@ interrupts = <GIC_SPI 283 IRQ_TYPE_EDGE_RISING>; #address-cells = <1>; #size-cells = <0>; - - dtt@50 { - compatible = "at,24c1024"; - reg = <0x50>; - }; }; i2c1: i2c@2530400 { @@ -115,6 +109,8 @@ clock-frequency = <100000>; clocks = <&clki2c>; interrupts = <GIC_SPI 286 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; }; i2c2: i2c@2530800 { @@ -123,6 +119,8 @@ clock-frequency = <100000>; clocks = <&clki2c>; interrupts = <GIC_SPI 289 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; }; spi0: spi@21000400 { @@ -132,6 +130,8 @@ ti,davinci-spi-intr-line = <0>; interrupts = <GIC_SPI 292 IRQ_TYPE_EDGE_RISING>; clocks = <&clkspi>; + #address-cells = <1>; + #size-cells = <0>; }; spi1: spi@21000600 { @@ -141,6 +141,8 @@ ti,davinci-spi-intr-line = <0>; interrupts = <GIC_SPI 296 IRQ_TYPE_EDGE_RISING>; clocks = <&clkspi>; + #address-cells = <1>; + #size-cells = <0>; }; spi2: spi@21000800 { @@ -150,6 +152,8 @@ ti,davinci-spi-intr-line = <0>; interrupts = <GIC_SPI 300 IRQ_TYPE_EDGE_RISING>; clocks = <&clkspi>; + #address-cells = <1>; + #size-cells = <0>; }; usb_phy: usb_phy@2620738 { @@ -169,6 +173,8 @@ clock-names = "usb"; interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>; ranges; + dma-coherent; + dma-ranges; status = "disabled"; dwc3@2690000 { diff --git a/arch/arm/boot/dts/kirkwood-6192.dtsi b/arch/arm/boot/dts/kirkwood-6192.dtsi index 3916937d6818..dd81508b919b 100644 --- a/arch/arm/boot/dts/kirkwood-6192.dtsi +++ b/arch/arm/boot/dts/kirkwood-6192.dtsi @@ -1,6 +1,6 @@ / { mbus { - pcie-controller { + pciec: pcie-controller { compatible = "marvell,kirkwood-pcie"; status = "disabled"; device_type = "pci"; @@ -15,7 +15,7 @@ 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */>; - pcie@1,0 { + pcie0: pcie@1,0 { device_type = "pci"; assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>; reg = <0x0800 0 0 0 0>; @@ -35,16 +35,9 @@ }; ocp@f1000000 { - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { compatible = "marvell,88f6192-pinctrl"; - reg = <0x10000 0x20>; - pmx_nand: pmx-nand { - marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3", - "mpp4", "mpp5", "mpp18", - "mpp19"; - marvell,function = "nand"; - }; pmx_sata0: pmx-sata0 { marvell,pins = "mpp5", "mpp21", "mpp23"; marvell,function = "sata0"; @@ -53,22 +46,6 @@ marvell,pins = "mpp4", "mpp20", "mpp22"; marvell,function = "sata1"; }; - pmx_spi: pmx-spi { - marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3"; - marvell,function = "spi"; - }; - pmx_twsi0: pmx-twsi0 { - marvell,pins = "mpp8", "mpp9"; - marvell,function = "twsi0"; - }; - pmx_uart0: pmx-uart0 { - marvell,pins = "mpp10", "mpp11"; - marvell,function = "uart0"; - }; - pmx_uart1: pmx-uart1 { - marvell,pins = "mpp13", "mpp14"; - marvell,function = "uart1"; - }; pmx_sdio: pmx-sdio { marvell,pins = "mpp12", "mpp13", "mpp14", "mpp15", "mpp16", "mpp17"; @@ -76,14 +53,14 @@ }; }; - rtc@10300 { + rtc: rtc@10300 { compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc"; reg = <0x10300 0x20>; interrupts = <53>; clocks = <&gate_clk 7>; }; - sata@80000 { + sata: sata@80000 { compatible = "marvell,orion-sata"; reg = <0x80000 0x5000>; interrupts = <21>; @@ -92,7 +69,7 @@ status = "disabled"; }; - mvsdio@90000 { + sdio: mvsdio@90000 { compatible = "marvell,orion-sdio"; reg = <0x90000 0x200>; interrupts = <28>; diff --git a/arch/arm/boot/dts/kirkwood-6281.dtsi b/arch/arm/boot/dts/kirkwood-6281.dtsi index 416d96e1302f..7dc7d6782e83 100644 --- a/arch/arm/boot/dts/kirkwood-6281.dtsi +++ b/arch/arm/boot/dts/kirkwood-6281.dtsi @@ -1,6 +1,6 @@ / { mbus { - pcie-controller { + pciec: pcie-controller { compatible = "marvell,kirkwood-pcie"; status = "disabled"; device_type = "pci"; @@ -15,7 +15,7 @@ 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */>; - pcie@1,0 { + pcie0: pcie@1,0 { device_type = "pci"; assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>; reg = <0x0800 0 0 0 0>; @@ -35,16 +35,9 @@ }; ocp@f1000000 { - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { compatible = "marvell,88f6281-pinctrl"; - reg = <0x10000 0x20>; - pmx_nand: pmx-nand { - marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3", - "mpp4", "mpp5", "mpp18", - "mpp19"; - marvell,function = "nand"; - }; pmx_sata0: pmx-sata0 { marvell,pins = "mpp5", "mpp21", "mpp23"; marvell,function = "sata0"; @@ -53,22 +46,6 @@ marvell,pins = "mpp4", "mpp20", "mpp22"; marvell,function = "sata1"; }; - pmx_spi: pmx-spi { - marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3"; - marvell,function = "spi"; - }; - pmx_twsi0: pmx-twsi0 { - marvell,pins = "mpp8", "mpp9"; - marvell,function = "twsi0"; - }; - pmx_uart0: pmx-uart0 { - marvell,pins = "mpp10", "mpp11"; - marvell,function = "uart0"; - }; - pmx_uart1: pmx-uart1 { - marvell,pins = "mpp13", "mpp14"; - marvell,function = "uart1"; - }; pmx_sdio: pmx-sdio { marvell,pins = "mpp12", "mpp13", "mpp14", "mpp15", "mpp16", "mpp17"; @@ -76,14 +53,14 @@ }; }; - rtc@10300 { + rtc: rtc@10300 { compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc"; reg = <0x10300 0x20>; interrupts = <53>; clocks = <&gate_clk 7>; }; - sata@80000 { + sata: sata@80000 { compatible = "marvell,orion-sata"; reg = <0x80000 0x5000>; interrupts = <21>; @@ -94,7 +71,7 @@ status = "disabled"; }; - mvsdio@90000 { + sdio: mvsdio@90000 { compatible = "marvell,orion-sdio"; reg = <0x90000 0x200>; interrupts = <28>; diff --git a/arch/arm/boot/dts/kirkwood-6282.dtsi b/arch/arm/boot/dts/kirkwood-6282.dtsi index 2902e0d7971d..4680eec990f0 100644 --- a/arch/arm/boot/dts/kirkwood-6282.dtsi +++ b/arch/arm/boot/dts/kirkwood-6282.dtsi @@ -1,6 +1,6 @@ / { mbus { - pcie-controller { + pciec: pcie-controller { compatible = "marvell,kirkwood-pcie"; status = "disabled"; device_type = "pci"; @@ -19,7 +19,7 @@ 0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 1.0 MEM */ 0x81000000 0x2 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 1.0 IO */>; - pcie@1,0 { + pcie0: pcie@1,0 { device_type = "pci"; assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>; reg = <0x0800 0 0 0 0>; @@ -36,7 +36,7 @@ status = "disabled"; }; - pcie@2,0 { + pcie1: pcie@2,0 { device_type = "pci"; assigned-addresses = <0x82001000 0 0x00044000 0 0x2000>; reg = <0x1000 0 0 0 0>; @@ -56,15 +56,8 @@ }; ocp@f1000000 { - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { compatible = "marvell,88f6282-pinctrl"; - reg = <0x10000 0x20>; - - pmx_nand: pmx-nand { - marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3", - "mpp4", "mpp5", "mpp18", "mpp19"; - marvell,function = "nand"; - }; pmx_sata0: pmx-sata0 { marvell,pins = "mpp5", "mpp21", "mpp23"; @@ -74,29 +67,16 @@ marvell,pins = "mpp4", "mpp20", "mpp22"; marvell,function = "sata1"; }; - pmx_spi: pmx-spi { - marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3"; - marvell,function = "spi"; - }; - pmx_twsi0: pmx-twsi0 { - marvell,pins = "mpp8", "mpp9"; - marvell,function = "twsi0"; - }; + /* + * Default I2C1 pinctrl setting on mpp36/mpp37, + * overwrite marvell,pins on board level if required. + */ pmx_twsi1: pmx-twsi1 { marvell,pins = "mpp36", "mpp37"; marvell,function = "twsi1"; }; - pmx_uart0: pmx-uart0 { - marvell,pins = "mpp10", "mpp11"; - marvell,function = "uart0"; - }; - - pmx_uart1: pmx-uart1 { - marvell,pins = "mpp13", "mpp14"; - marvell,function = "uart1"; - }; pmx_sdio: pmx-sdio { marvell,pins = "mpp12", "mpp13", "mpp14", "mpp15", "mpp16", "mpp17"; @@ -104,20 +84,20 @@ }; }; - thermal@10078 { + thermal: thermal@10078 { compatible = "marvell,kirkwood-thermal"; reg = <0x10078 0x4>; status = "okay"; }; - rtc@10300 { + rtc: rtc@10300 { compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc"; reg = <0x10300 0x20>; interrupts = <53>; clocks = <&gate_clk 7>; }; - i2c@11100 { + i2c1: i2c@11100 { compatible = "marvell,mv64xxx-i2c"; reg = <0x11100 0x20>; #address-cells = <1>; @@ -125,10 +105,12 @@ interrupts = <32>; clock-frequency = <100000>; clocks = <&gate_clk 7>; + pinctrl-0 = <&pmx_twsi1>; + pinctrl-names = "default"; status = "disabled"; }; - sata@80000 { + sata: sata@80000 { compatible = "marvell,orion-sata"; reg = <0x80000 0x5000>; interrupts = <21>; @@ -139,7 +121,7 @@ status = "disabled"; }; - mvsdio@90000 { + sdio: mvsdio@90000 { compatible = "marvell,orion-sdio"; reg = <0x90000 0x200>; interrupts = <28>; diff --git a/arch/arm/boot/dts/kirkwood-98dx4122.dtsi b/arch/arm/boot/dts/kirkwood-98dx4122.dtsi index 3271e4c8ea07..9e1f741d74ff 100644 --- a/arch/arm/boot/dts/kirkwood-98dx4122.dtsi +++ b/arch/arm/boot/dts/kirkwood-98dx4122.dtsi @@ -1,31 +1,51 @@ / { + mbus { + pciec: pcie-controller { + compatible = "marvell,kirkwood-pcie"; + status = "disabled"; + device_type = "pci"; + + #address-cells = <3>; + #size-cells = <2>; + + bus-range = <0x00 0xff>; + + ranges = + <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 + 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ + 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */>; + + pcie0: pcie@1,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>; + reg = <0x0800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 + 0x81000000 0 0 0x81000000 0x1 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &intc 9>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <0>; + clocks = <&gate_clk 2>; + status = "disabled"; + }; + }; + }; + ocp@f1000000 { - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { compatible = "marvell,98dx4122-pinctrl"; - reg = <0x10000 0x20>; - pmx_nand: pmx-nand { - marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3", - "mpp4", "mpp5", "mpp18", - "mpp19"; - marvell,function = "nand"; - }; - pmx_spi: pmx-spi { - marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3"; - marvell,function = "spi"; - }; - pmx_twsi0: pmx-twsi0 { - marvell,pins = "mpp8", "mpp9"; - marvell,function = "twsi0"; - }; - pmx_uart0: pmx-uart0 { - marvell,pins = "mpp10", "mpp11"; - marvell,function = "uart0"; - }; - pmx_uart1: pmx-uart1 { - marvell,pins = "mpp13", "mpp14"; - marvell,function = "uart1"; - }; }; }; }; + +&sata_phy0 { + status = "disabled"; +}; + +&sata_phy1 { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/kirkwood-b3.dts b/arch/arm/boot/dts/kirkwood-b3.dts index 6becedebaa4e..c9247f8672ae 100644 --- a/arch/arm/boot/dts/kirkwood-b3.dts +++ b/arch/arm/boot/dts/kirkwood-b3.dts @@ -30,6 +30,7 @@ chosen { bootargs = "console=ttyS0,115200n8 earlyprintk"; + stdout-path = &uart0; }; mbus { @@ -44,7 +45,7 @@ }; ocp@f1000000 { - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { pmx_button_power: pmx-button-power { marvell,pins = "mpp39"; marvell,function = "gpio"; @@ -69,8 +70,6 @@ spi@10600 { status = "okay"; - pinctrl-0 = <&pmx_spi>; - pinctrl-names = "default"; m25p16@0 { #address-cells = <1>; @@ -113,8 +112,6 @@ * UART0_TX = Testpoint 66 * See the Excito Wiki for more details. */ - pinctrl-0 = <&pmx_uart0>; - pinctrl-names = "default"; status = "okay"; }; diff --git a/arch/arm/boot/dts/kirkwood-cloudbox.dts b/arch/arm/boot/dts/kirkwood-cloudbox.dts index 3b62aeeaa3a2..ab6ab4933e6b 100644 --- a/arch/arm/boot/dts/kirkwood-cloudbox.dts +++ b/arch/arm/boot/dts/kirkwood-cloudbox.dts @@ -14,10 +14,11 @@ chosen { bootargs = "console=ttyS0,115200n8"; + stdout-path = &uart0; }; ocp@f1000000 { - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { pmx_cloudbox_sata0: pmx-cloudbox-sata0 { marvell,pins = "mpp15"; marvell,function = "sata0"; @@ -25,9 +26,6 @@ }; serial@12000 { - pinctrl-0 = <&pmx_uart0>; - pinctrl-names = "default"; - clock-frequency = <166666667>; status = "okay"; }; @@ -39,8 +37,6 @@ }; spi@10600 { - pinctrl-0 = <&pmx_spi>; - pinctrl-names = "default"; status = "okay"; flash@0 { diff --git a/arch/arm/boot/dts/kirkwood-db.dtsi b/arch/arm/boot/dts/kirkwood-db.dtsi index 02d1225ef99f..812df691ae3d 100644 --- a/arch/arm/boot/dts/kirkwood-db.dtsi +++ b/arch/arm/boot/dts/kirkwood-db.dtsi @@ -22,10 +22,11 @@ chosen { bootargs = "console=ttyS0,115200n8 earlyprintk"; + stdout-path = &uart0; }; ocp@f1000000 { - pinctrl@10000 { + pin-controller@10000 { pmx_sdio_gpios: pmx-sdio-gpios { marvell,pins = "mpp37", "mpp38"; marvell,function = "gpio"; @@ -33,10 +34,7 @@ }; serial@12000 { - pinctrl-0 = <&pmx_uart0>; - pinctrl-names = "default"; - clock-frequency = <200000000>; - status = "ok"; + status = "okay"; }; sata@80000 { @@ -59,8 +57,6 @@ }; &nand { - pinctrl-0 = <&pmx_nand>; - pinctrl-names = "default"; chip-delay = <25>; status = "okay"; diff --git a/arch/arm/boot/dts/kirkwood-dns320.dts b/arch/arm/boot/dts/kirkwood-dns320.dts index bf7fe8ab88f4..d85ef0a91b50 100644 --- a/arch/arm/boot/dts/kirkwood-dns320.dts +++ b/arch/arm/boot/dts/kirkwood-dns320.dts @@ -13,6 +13,7 @@ chosen { bootargs = "console=ttyS0,115200n8 earlyprintk"; + stdout-path = &uart0; }; gpio-leds { @@ -51,8 +52,6 @@ }; serial@12100 { - pinctrl-0 = <&pmx_uart1>; - pinctrl-names = "default"; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/kirkwood-dns325.dts b/arch/arm/boot/dts/kirkwood-dns325.dts index cb9978c652f2..5e586ed04c58 100644 --- a/arch/arm/boot/dts/kirkwood-dns325.dts +++ b/arch/arm/boot/dts/kirkwood-dns325.dts @@ -13,6 +13,7 @@ chosen { bootargs = "console=ttyS0,115200n8 earlyprintk"; + stdout-path = &uart0; }; gpio-leds { diff --git a/arch/arm/boot/dts/kirkwood-dnskw.dtsi b/arch/arm/boot/dts/kirkwood-dnskw.dtsi index d5aa9564a287..113dcf056dcf 100644 --- a/arch/arm/boot/dts/kirkwood-dnskw.dtsi +++ b/arch/arm/boot/dts/kirkwood-dnskw.dtsi @@ -50,7 +50,7 @@ }; ocp@f1000000 { - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { pinctrl-0 = <&pmx_power_back_on &pmx_present_sata0 &pmx_present_sata1 &pmx_fan_tacho @@ -183,8 +183,6 @@ }; &nand { - pinctrl-0 = <&pmx_nand>; - pinctrl-names = "default"; status = "okay"; chip-delay = <35>; diff --git a/arch/arm/boot/dts/kirkwood-dockstar.dts b/arch/arm/boot/dts/kirkwood-dockstar.dts index f31312ebd0d6..849736349511 100644 --- a/arch/arm/boot/dts/kirkwood-dockstar.dts +++ b/arch/arm/boot/dts/kirkwood-dockstar.dts @@ -14,10 +14,11 @@ chosen { bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10"; + stdout-path = &uart0; }; ocp@f1000000 { - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { pmx_usb_power_enable: pmx-usb-power-enable { marvell,pins = "mpp29"; marvell,function = "gpio"; diff --git a/arch/arm/boot/dts/kirkwood-dreamplug.dts b/arch/arm/boot/dts/kirkwood-dreamplug.dts index 28b3ee369778..6467c7924195 100644 --- a/arch/arm/boot/dts/kirkwood-dreamplug.dts +++ b/arch/arm/boot/dts/kirkwood-dreamplug.dts @@ -14,10 +14,11 @@ chosen { bootargs = "console=ttyS0,115200n8 earlyprintk"; + stdout-path = &uart0; }; ocp@f1000000 { - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { pmx_led_bluetooth: pmx-led-bluetooth { marvell,pins = "mpp47"; marvell,function = "gpio"; @@ -37,8 +38,6 @@ spi@10600 { status = "okay"; - pinctrl-0 = <&pmx_spi>; - pinctrl-names = "default"; m25p40@0 { #address-cells = <1>; diff --git a/arch/arm/boot/dts/kirkwood-ds109.dts b/arch/arm/boot/dts/kirkwood-ds109.dts index 772092c94ca3..d4bcc1c7f6b3 100644 --- a/arch/arm/boot/dts/kirkwood-ds109.dts +++ b/arch/arm/boot/dts/kirkwood-ds109.dts @@ -25,6 +25,7 @@ chosen { bootargs = "console=ttyS0,115200n8"; + stdout-path = &uart0; }; gpio-fan-150-32-35 { diff --git a/arch/arm/boot/dts/kirkwood-ds110jv10.dts b/arch/arm/boot/dts/kirkwood-ds110jv10.dts index aabafbe0da4c..95bf83b91b4a 100644 --- a/arch/arm/boot/dts/kirkwood-ds110jv10.dts +++ b/arch/arm/boot/dts/kirkwood-ds110jv10.dts @@ -25,6 +25,7 @@ chosen { bootargs = "console=ttyS0,115200n8"; + stdout-path = &uart0; }; gpio-fan-150-32-35 { diff --git a/arch/arm/boot/dts/kirkwood-ds111.dts b/arch/arm/boot/dts/kirkwood-ds111.dts index 16ec7fbab573..61f47fbe44d0 100644 --- a/arch/arm/boot/dts/kirkwood-ds111.dts +++ b/arch/arm/boot/dts/kirkwood-ds111.dts @@ -24,6 +24,7 @@ chosen { bootargs = "console=ttyS0,115200n8"; + stdout-path = &uart0; }; gpio-fan-100-15-35-1 { diff --git a/arch/arm/boot/dts/kirkwood-ds112.dts b/arch/arm/boot/dts/kirkwood-ds112.dts index cff1b2388765..bf4143c6cb8f 100644 --- a/arch/arm/boot/dts/kirkwood-ds112.dts +++ b/arch/arm/boot/dts/kirkwood-ds112.dts @@ -24,6 +24,7 @@ chosen { bootargs = "console=ttyS0,115200n8"; + stdout-path = &uart0; }; gpio-fan-100-15-35-1 { diff --git a/arch/arm/boot/dts/kirkwood-ds209.dts b/arch/arm/boot/dts/kirkwood-ds209.dts index 330411993d38..6d25093a9ac4 100644 --- a/arch/arm/boot/dts/kirkwood-ds209.dts +++ b/arch/arm/boot/dts/kirkwood-ds209.dts @@ -24,6 +24,7 @@ chosen { bootargs = "console=ttyS0,115200n8"; + stdout-path = &uart0; }; gpio-fan-150-32-35 { diff --git a/arch/arm/boot/dts/kirkwood-ds210.dts b/arch/arm/boot/dts/kirkwood-ds210.dts index 6052eaa37d4f..2f1933efcac1 100644 --- a/arch/arm/boot/dts/kirkwood-ds210.dts +++ b/arch/arm/boot/dts/kirkwood-ds210.dts @@ -26,6 +26,7 @@ chosen { bootargs = "console=ttyS0,115200n8"; + stdout-path = &uart0; }; gpio-fan-150-32-35 { diff --git a/arch/arm/boot/dts/kirkwood-ds212.dts b/arch/arm/boot/dts/kirkwood-ds212.dts index 7f76cd30e84e..99afd462f956 100644 --- a/arch/arm/boot/dts/kirkwood-ds212.dts +++ b/arch/arm/boot/dts/kirkwood-ds212.dts @@ -27,6 +27,7 @@ chosen { bootargs = "console=ttyS0,115200n8"; + stdout-path = &uart0; }; gpio-fan-100-15-35-1 { diff --git a/arch/arm/boot/dts/kirkwood-ds212j.dts b/arch/arm/boot/dts/kirkwood-ds212j.dts index 1f83a00f1f74..f5c4213fc67c 100644 --- a/arch/arm/boot/dts/kirkwood-ds212j.dts +++ b/arch/arm/boot/dts/kirkwood-ds212j.dts @@ -25,6 +25,7 @@ chosen { bootargs = "console=ttyS0,115200n8"; + stdout-path = &uart0; }; gpio-fan-100-32-35 { diff --git a/arch/arm/boot/dts/kirkwood-ds409.dts b/arch/arm/boot/dts/kirkwood-ds409.dts index 0a573add44a2..e80a962ebba0 100644 --- a/arch/arm/boot/dts/kirkwood-ds409.dts +++ b/arch/arm/boot/dts/kirkwood-ds409.dts @@ -24,6 +24,7 @@ chosen { bootargs = "console=ttyS0,115200n8"; + stdout-path = &uart0; }; gpio-fan-150-15-18 { diff --git a/arch/arm/boot/dts/kirkwood-ds409slim.dts b/arch/arm/boot/dts/kirkwood-ds409slim.dts index 1848a6245fd3..cae5af4b88b5 100644 --- a/arch/arm/boot/dts/kirkwood-ds409slim.dts +++ b/arch/arm/boot/dts/kirkwood-ds409slim.dts @@ -24,6 +24,7 @@ chosen { bootargs = "console=ttyS0,115200n8"; + stdout-path = &uart0; }; gpio-fan-150-32-35 { diff --git a/arch/arm/boot/dts/kirkwood-ds411.dts b/arch/arm/boot/dts/kirkwood-ds411.dts index a1737b4311c6..623cd4a37d71 100644 --- a/arch/arm/boot/dts/kirkwood-ds411.dts +++ b/arch/arm/boot/dts/kirkwood-ds411.dts @@ -24,6 +24,7 @@ chosen { bootargs = "console=ttyS0,115200n8"; + stdout-path = &uart0; }; gpio-fan-100-15-35-1 { diff --git a/arch/arm/boot/dts/kirkwood-ds411j.dts b/arch/arm/boot/dts/kirkwood-ds411j.dts index 0cde914eceae..3348e330f074 100644 --- a/arch/arm/boot/dts/kirkwood-ds411j.dts +++ b/arch/arm/boot/dts/kirkwood-ds411j.dts @@ -24,6 +24,7 @@ chosen { bootargs = "console=ttyS0,115200n8"; + stdout-path = &uart0; }; gpio-fan-150-15-18 { diff --git a/arch/arm/boot/dts/kirkwood-ds411slim.dts b/arch/arm/boot/dts/kirkwood-ds411slim.dts index aef0cadc2c78..a0a1fad8b4de 100644 --- a/arch/arm/boot/dts/kirkwood-ds411slim.dts +++ b/arch/arm/boot/dts/kirkwood-ds411slim.dts @@ -24,6 +24,7 @@ chosen { bootargs = "console=ttyS0,115200n8"; + stdout-path = &uart0; }; gpio-fan-100-15-35-1 { diff --git a/arch/arm/boot/dts/kirkwood-goflexnet.dts b/arch/arm/boot/dts/kirkwood-goflexnet.dts index eb9329420107..aa60a0b049a7 100644 --- a/arch/arm/boot/dts/kirkwood-goflexnet.dts +++ b/arch/arm/boot/dts/kirkwood-goflexnet.dts @@ -14,10 +14,11 @@ chosen { bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10"; + stdout-path = &uart0; }; ocp@f1000000 { - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { pmx_usb_power_enable: pmx-usb-power-enable { marvell,pins = "mpp29"; marvell,function = "gpio"; diff --git a/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts b/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts index 2d51fce74a5a..c5a1fc75c7a3 100644 --- a/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts +++ b/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts @@ -14,10 +14,11 @@ chosen { bootargs = "console=ttyS0,115200n8 earlyprintk"; + stdout-path = &uart0; }; ocp@f1000000 { - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { pmx_led_health_r: pmx-led-health-r { marvell,pins = "mpp46"; marvell,function = "gpio"; @@ -36,7 +37,6 @@ }; }; serial@12000 { - clock-frequency = <200000000>; status = "ok"; }; @@ -101,13 +101,19 @@ status = "okay"; ethphy0: ethernet-phy@0 { - compatible = "marvell,88e1121"; + /* Marvell 88E1121R */ + compatible = "ethernet-phy-id0141.0cb0", + "ethernet-phy-ieee802.3-c22"; reg = <0>; + phy-connection-type = "rgmii-id"; }; ethphy1: ethernet-phy@1 { - compatible = "marvell,88e1121"; + /* Marvell 88E1121R */ + compatible = "ethernet-phy-id0141.0cb0", + "ethernet-phy-ieee802.3-c22"; reg = <1>; + phy-connection-type = "rgmii-id"; }; }; diff --git a/arch/arm/boot/dts/kirkwood-ib62x0.dts b/arch/arm/boot/dts/kirkwood-ib62x0.dts index a1add3f215e3..bfa5edde179c 100644 --- a/arch/arm/boot/dts/kirkwood-ib62x0.dts +++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts @@ -14,10 +14,11 @@ chosen { bootargs = "console=ttyS0,115200n8 earlyprintk"; + stdout-path = &uart0; }; ocp@f1000000 { - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { pmx_led_os_red: pmx-led-os-red { marvell,pins = "mpp22"; marvell,function = "gpio"; @@ -104,8 +105,6 @@ &nand { status = "okay"; - pinctrl-0 = <&pmx_nand>; - pinctrl-names = "default"; partition@0 { label = "u-boot"; diff --git a/arch/arm/boot/dts/kirkwood-iconnect.dts b/arch/arm/boot/dts/kirkwood-iconnect.dts index 8d8c80e3656d..38e31d15a62d 100644 --- a/arch/arm/boot/dts/kirkwood-iconnect.dts +++ b/arch/arm/boot/dts/kirkwood-iconnect.dts @@ -14,6 +14,7 @@ chosen { bootargs = "console=ttyS0,115200n8 earlyprintk"; + stdout-path = &uart0; linux,initrd-start = <0x4500040>; linux,initrd-end = <0x4800000>; }; @@ -29,7 +30,7 @@ }; ocp@f1000000 { - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { pmx_button_reset: pmx-button-reset { marvell,pins = "mpp12"; marvell,function = "gpio"; diff --git a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts index 59e7a5adeedb..05291f3990d0 100644 --- a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts +++ b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts @@ -14,10 +14,11 @@ chosen { bootargs = "console=ttyS0,115200n8 earlyprintk"; + stdout-path = &uart0; }; ocp@f1000000 { - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { pinctrl-0 = < &pmx_led_sata_brt_ctrl_1 &pmx_led_sata_brt_ctrl_2 &pmx_led_backup_brt_ctrl_1 diff --git a/arch/arm/boot/dts/kirkwood-km_common.dtsi b/arch/arm/boot/dts/kirkwood-km_common.dtsi new file mode 100644 index 000000000000..8367c772c764 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-km_common.dtsi @@ -0,0 +1,48 @@ +/ { + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + stdout-path = &uart0; + }; + + mbus { + pcie-controller { + status = "okay"; + + pcie@1,0 { + status = "okay"; + }; + }; + }; + + ocp@f1000000 { + pinctrl: pin-controller@10000 { + pinctrl-0 = < &pmx_i2c_gpio_sda &pmx_i2c_gpio_scl >; + pinctrl-names = "default"; + + pmx_i2c_gpio_sda: pmx-gpio-sda { + marvell,pins = "mpp8"; + marvell,function = "gpio"; + }; + pmx_i2c_gpio_scl: pmx-gpio-scl { + marvell,pins = "mpp9"; + marvell,function = "gpio"; + }; + }; + + serial@12000 { + status = "okay"; + }; + }; + + i2c@0 { + compatible = "i2c-gpio"; + gpios = < &gpio0 8 GPIO_ACTIVE_HIGH /* sda */ + &gpio0 9 GPIO_ACTIVE_HIGH>; /* scl */ + i2c-gpio,delay-us = <2>; /* ~100 kHz */ + }; +}; + +&nand { + status = "okay"; + chip-delay = <25>; +}; diff --git a/arch/arm/boot/dts/kirkwood-km_fixedeth.dts b/arch/arm/boot/dts/kirkwood-km_fixedeth.dts new file mode 100644 index 000000000000..9895f2b10f8a --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-km_fixedeth.dts @@ -0,0 +1,23 @@ +/dts-v1/; + +#include "kirkwood.dtsi" +#include "kirkwood-98dx4122.dtsi" +#include "kirkwood-km_common.dtsi" + +/ { + model = "Keymile Kirkwood Fixed Eth"; + compatible = "keymile,km_fixedeth", "marvell,kirkwood-98DX4122", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; +}; + +ð0 { + status = "okay"; + ethernet0-port@0 { + speed = <1000>; /* <SPEED_1000> */ + duplex = <1>; /* <DUPLEX_FULL> */ + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts index 04a1e44541b3..235bf382fff9 100644 --- a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts +++ b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts @@ -2,6 +2,7 @@ #include "kirkwood.dtsi" #include "kirkwood-98dx4122.dtsi" +#include "kirkwood-km_common.dtsi" / { model = "Keymile Kirkwood Reference Design"; @@ -11,44 +12,6 @@ device_type = "memory"; reg = <0x00000000 0x08000000>; }; - - chosen { - bootargs = "console=ttyS0,115200n8 earlyprintk"; - }; - - ocp@f1000000 { - pinctrl: pinctrl@10000 { - pinctrl-0 = < &pmx_i2c_gpio_sda &pmx_i2c_gpio_scl >; - pinctrl-names = "default"; - - pmx_i2c_gpio_sda: pmx-gpio-sda { - marvell,pins = "mpp8"; - marvell,function = "gpio"; - }; - pmx_i2c_gpio_scl: pmx-gpio-scl { - marvell,pins = "mpp9"; - marvell,function = "gpio"; - }; - }; - - serial@12000 { - status = "ok"; - }; - }; - - i2c@0 { - compatible = "i2c-gpio"; - gpios = < &gpio0 8 GPIO_ACTIVE_HIGH /* sda */ - &gpio0 9 GPIO_ACTIVE_HIGH>; /* scl */ - i2c-gpio,delay-us = <2>; /* ~100 kHz */ - }; -}; - -&nand { - pinctrl-0 = <&pmx_nand>; - pinctrl-names = "default"; - status = "ok"; - chip-delay = <25>; }; &mdio { diff --git a/arch/arm/boot/dts/kirkwood-laplug.dts b/arch/arm/boot/dts/kirkwood-laplug.dts index 6761ffa2c4ab..24425660e973 100644 --- a/arch/arm/boot/dts/kirkwood-laplug.dts +++ b/arch/arm/boot/dts/kirkwood-laplug.dts @@ -24,6 +24,7 @@ chosen { bootargs = "console=ttyS0,115200n8 earlyprintk"; + stdout-path = &uart0; }; mbus { @@ -37,14 +38,10 @@ ocp@f1000000 { serial@12000 { - pinctrl-0 = <&pmx_uart0>; - pinctrl-names = "default"; status = "okay"; }; i2c@11000 { - pinctrl-0 = <&pmx_twsi0>; - pinctrl-names = "default"; status = "okay"; eeprom@50 { @@ -54,7 +51,7 @@ }; }; - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { pmx_usb_power_enable: pmx-usb-power-enable { marvell,pins = "mpp14"; marvell,function = "gpio"; @@ -139,7 +136,6 @@ &nand { /* Total size : 512MB */ status = "okay"; - pinctrl-0 = <&pmx_nand>; partition@0 { label = "u-boot"; diff --git a/arch/arm/boot/dts/kirkwood-lsxl.dtsi b/arch/arm/boot/dts/kirkwood-lsxl.dtsi index 1656653d339b..53484474df1f 100644 --- a/arch/arm/boot/dts/kirkwood-lsxl.dtsi +++ b/arch/arm/boot/dts/kirkwood-lsxl.dtsi @@ -4,10 +4,11 @@ / { chosen { bootargs = "console=ttyS0,115200n8 earlyprintk"; + stdout-path = &uart0; }; ocp@f1000000 { - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { pmx_power_hdd: pmx-power-hdd { marvell,pins = "mpp10"; marvell,function = "gpo"; diff --git a/arch/arm/boot/dts/kirkwood-mplcec4.dts b/arch/arm/boot/dts/kirkwood-mplcec4.dts index 73722c067501..f3a991837515 100644 --- a/arch/arm/boot/dts/kirkwood-mplcec4.dts +++ b/arch/arm/boot/dts/kirkwood-mplcec4.dts @@ -12,9 +12,10 @@ reg = <0x00000000 0x20000000>; }; - chosen { - bootargs = "console=ttyS0,115200n8 earlyprintk"; - }; + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + stdout-path = &uart0; + }; mbus { pcie-controller { @@ -27,7 +28,7 @@ }; ocp@f1000000 { - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { pmx_led_health: pmx-led-health { marvell,pins = "mpp7"; marvell,function = "gpo"; @@ -89,11 +90,9 @@ }; - serial@12000 { - status = "ok"; - pinctrl-0 = <&pmx_uart0>; - pinctrl-names = "default"; - }; + serial@12000 { + status = "okay"; + }; rtc@10300 { status = "disabled"; @@ -163,8 +162,6 @@ }; &nand { - pinctrl-0 = <&pmx_nand>; - pinctrl-names = "default"; status = "okay"; partition@0 { diff --git a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts index b939f4f52d16..8f76d28759a3 100644 --- a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts +++ b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts @@ -28,6 +28,7 @@ chosen { bootargs = "console=ttyS0,115200n8 earlyprintk"; + stdout-path = &uart0; }; mbus { @@ -41,7 +42,7 @@ }; ocp@f1000000 { - pinctrl@10000 { + pin-controller@10000 { pmx_usb_led: pmx-usb-led { marvell,pins = "mpp12"; marvell,function = "gpo"; @@ -59,8 +60,6 @@ }; spi@10600 { - pinctrl-0 = <&pmx_spi>; - pinctrl-names = "default"; status = "okay"; flash@0 { @@ -74,10 +73,7 @@ }; serial@12000 { - pinctrl-0 = <&pmx_uart0>; - pinctrl-names = "default"; - clock-frequency = <200000000>; - status = "ok"; + status = "okay"; }; ehci@50000 { diff --git a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts index 4838478019cc..fd733c63bc27 100644 --- a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts +++ b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts @@ -25,6 +25,7 @@ chosen { bootargs = "console=ttyS0,115200n8 earlyprintk"; + stdout-path = &uart0; }; mbus { @@ -38,7 +39,7 @@ }; ocp@f1000000 { - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { pmx_button_power: pmx-button-power { marvell,pins = "mpp47"; marvell,function = "gpio"; @@ -112,8 +113,6 @@ }; serial@12000 { - pinctrl-0 = <&pmx_uart0>; - pinctrl-names = "default"; status = "okay"; }; diff --git a/arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts b/arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts index 7c8a0d9d8d1f..b514d643fb6c 100644 --- a/arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts +++ b/arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts @@ -25,6 +25,7 @@ chosen { bootargs = "console=ttyS0,115200n8 earlyprintk"; + stdout-path = &uart0; }; mbus { @@ -40,7 +41,7 @@ }; ocp@f1000000 { - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { pmx_button_power: pmx-button-power { marvell,pins = "mpp47"; marvell,function = "gpio"; @@ -119,8 +120,6 @@ }; serial@12000 { - pinctrl-0 = <&pmx_uart0>; - pinctrl-names = "default"; status = "okay"; }; diff --git a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi index e6e5ec4fe6b9..fe6c0246db1a 100644 --- a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi +++ b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi @@ -4,10 +4,11 @@ / { chosen { bootargs = "console=ttyS0,115200n8"; + stdout-path = &uart0; }; ocp@f1000000 { - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { pmx_ns2_sata0: pmx-ns2-sata0 { marvell,pins = "mpp21"; marvell,function = "sata0"; @@ -19,14 +20,10 @@ }; serial@12000 { - pinctrl-0 = <&pmx_uart0>; - pinctrl-names = "default"; status = "okay"; }; spi@10600 { - pinctrl-0 = <&pmx_spi>; - pinctrl-names = "default"; status = "okay"; flash@0 { @@ -45,8 +42,6 @@ }; i2c@11000 { - pinctrl-0 = <&pmx_twsi0>; - pinctrl-names = "default"; status = "okay"; eeprom@50 { diff --git a/arch/arm/boot/dts/kirkwood-nsa310.dts b/arch/arm/boot/dts/kirkwood-nsa310.dts index 0a07af9d8e58..6139df0f376c 100644 --- a/arch/arm/boot/dts/kirkwood-nsa310.dts +++ b/arch/arm/boot/dts/kirkwood-nsa310.dts @@ -1,6 +1,6 @@ /dts-v1/; -#include "kirkwood-nsa310-common.dtsi" +#include "kirkwood-nsa3x0-common.dtsi" / { compatible = "zyxel,nsa310", "marvell,kirkwood-88f6281", "marvell,kirkwood"; @@ -12,6 +12,7 @@ chosen { bootargs = "console=ttyS0,115200"; + stdout-path = &uart0; }; mbus { @@ -25,7 +26,7 @@ }; ocp@f1000000 { - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { pinctrl-0 = <&pmx_unknown>; pinctrl-names = "default"; @@ -59,26 +60,6 @@ marvell,function = "gpio"; }; - pmx_btn_reset: pmx-btn-reset { - marvell,pins = "mpp36"; - marvell,function = "gpio"; - }; - - pmx_btn_copy: pmx-btn-copy { - marvell,pins = "mpp37"; - marvell,function = "gpio"; - }; - - pmx_led_copy_green: pmx-led-copy-green { - marvell,pins = "mpp39"; - marvell,function = "gpio"; - }; - - pmx_led_copy_red: pmx-led-copy-red { - marvell,pins = "mpp40"; - marvell,function = "gpio"; - }; - pmx_led_hdd_green: pmx-led-hdd-green { marvell,pins = "mpp41"; marvell,function = "gpio"; @@ -94,10 +75,6 @@ marvell,function = "gpio"; }; - pmx_btn_power: pmx-btn-power { - marvell,pins = "mpp46"; - marvell,function = "gpio"; - }; }; i2c@11000 { @@ -110,30 +87,6 @@ }; }; - gpio_keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-0 = <&pmx_btn_reset &pmx_btn_copy &pmx_btn_power>; - pinctrl-names = "default"; - - button@1 { - label = "Power Button"; - linux,code = <KEY_POWER>; - gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>; - }; - button@2 { - label = "Copy Button"; - linux,code = <KEY_COPY>; - gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; - }; - button@3 { - label = "Reset Button"; - linux,code = <KEY_RESTART>; - gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; - }; - }; - gpio-leds { compatible = "gpio-leds"; pinctrl-0 = <&pmx_led_esata_green &pmx_led_esata_red diff --git a/arch/arm/boot/dts/kirkwood-nsa310a.dts b/arch/arm/boot/dts/kirkwood-nsa310a.dts index 27ca6a79c48a..3d2b3d494c19 100644 --- a/arch/arm/boot/dts/kirkwood-nsa310a.dts +++ b/arch/arm/boot/dts/kirkwood-nsa310a.dts @@ -1,6 +1,6 @@ /dts-v1/; -#include "kirkwood-nsa310-common.dtsi" +#include "kirkwood-nsa3x0-common.dtsi" /* * There are at least two different NSA310 designs. This variant does @@ -17,10 +17,11 @@ chosen { bootargs = "console=ttyS0,115200"; + stdout-path = &uart0; }; ocp@f1000000 { - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { pinctrl-names = "default"; pmx_led_esata_green: pmx-led-esata-green { @@ -38,11 +39,6 @@ marvell,function = "gpio"; }; - pmx_usb_power_off: pmx-usb-power-off { - marvell,pins = "mpp21"; - marvell,function = "gpio"; - }; - pmx_led_sys_green: pmx-led-sys-green { marvell,pins = "mpp28"; marvell,function = "gpio"; @@ -53,26 +49,6 @@ marvell,function = "gpio"; }; - pmx_btn_reset: pmx-btn-reset { - marvell,pins = "mpp36"; - marvell,function = "gpio"; - }; - - pmx_btn_copy: pmx-btn-copy { - marvell,pins = "mpp37"; - marvell,function = "gpio"; - }; - - pmx_led_copy_green: pmx-led-copy-green { - marvell,pins = "mpp39"; - marvell,function = "gpio"; - }; - - pmx_led_copy_red: pmx-led-copy-red { - marvell,pins = "mpp40"; - marvell,function = "gpio"; - }; - pmx_led_hdd_green: pmx-led-hdd-green { marvell,pins = "mpp41"; marvell,function = "gpio"; @@ -83,11 +59,6 @@ marvell,function = "gpio"; }; - pmx_btn_power: pmx-btn-power { - marvell,pins = "mpp46"; - marvell,function = "gpio"; - }; - }; i2c@11000 { @@ -100,28 +71,6 @@ }; }; - gpio_keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - - button@1 { - label = "Power Button"; - linux,code = <KEY_POWER>; - gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>; - }; - button@2 { - label = "Copy Button"; - linux,code = <KEY_COPY>; - gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; - }; - button@3 { - label = "Reset Button"; - linux,code = <KEY_RESTART>; - gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; - }; - }; - gpio-leds { compatible = "gpio-leds"; diff --git a/arch/arm/boot/dts/kirkwood-nsa320.dts b/arch/arm/boot/dts/kirkwood-nsa320.dts new file mode 100644 index 000000000000..24f686d1044d --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-nsa320.dts @@ -0,0 +1,215 @@ +/* Device tree file for the Zyxel NSA 320 NAS box. + * + * Copyright (c) 2014, Adam Baker <linux@baker-net.org.uk> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * Based upon the board setup file created by Peter Schildmann */ + +/dts-v1/; + +#include "kirkwood-nsa3x0-common.dtsi" + +/ { + model = "Zyxel NSA320"; + compatible = "zyxel,nsa320", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + stdout-path = &uart0; + }; + + mbus { + pcie-controller { + status = "okay"; + + pcie@1,0 { + status = "okay"; + }; + }; + }; + + ocp@f1000000 { + pinctrl: pin-controller@10000 { + pinctrl-names = "default"; + + /* SATA Activity and Present pins are not connected */ + pmx_sata0: pmx-sata0 { + marvell,pins ; + marvell,function = "sata0"; + }; + + pmx_sata1: pmx-sata1 { + marvell,pins ; + marvell,function = "sata1"; + }; + + pmx_led_hdd2_green: pmx-led-hdd2-green { + marvell,pins = "mpp12"; + marvell,function = "gpio"; + }; + + pmx_led_hdd2_red: pmx-led-hdd2-red { + marvell,pins = "mpp13"; + marvell,function = "gpio"; + }; + + pmx_mcu_data: pmx-mcu-data { + marvell,pins = "mpp14"; + marvell,function = "gpio"; + }; + + pmx_led_usb_green: pmx-led-usb-green { + marvell,pins = "mpp15"; + marvell,function = "gpio"; + }; + + pmx_mcu_clk: pmx-mcu-clk { + marvell,pins = "mpp16"; + marvell,function = "gpio"; + }; + + pmx_mcu_act: pmx-mcu-act { + marvell,pins = "mpp17"; + marvell,function = "gpio"; + }; + + pmx_led_sys_green: pmx-led-sys-green { + marvell,pins = "mpp28"; + marvell,function = "gpio"; + }; + + pmx_led_sys_orange: pmx-led-sys-orange { + marvell,pins = "mpp29"; + marvell,function = "gpio"; + }; + + pmx_led_hdd1_green: pmx-led-hdd1-green { + marvell,pins = "mpp41"; + marvell,function = "gpio"; + }; + + pmx_led_hdd1_red: pmx-led-hdd1-red { + marvell,pins = "mpp42"; + marvell,function = "gpio"; + }; + + pmx_htp: pmx-htp { + marvell,pins = "mpp43"; + marvell,function = "gpio"; + }; + + /* Buzzer needs to be switched at around 1kHz so is + not compatible with the gpio-beeper driver. */ + pmx_buzzer: pmx-buzzer { + marvell,pins = "mpp44"; + marvell,function = "gpio"; + }; + + pmx_vid_b1: pmx-vid-b1 { + marvell,pins = "mpp45"; + marvell,function = "gpio"; + }; + + pmx_power_resume_data: pmx-power-resume-data { + marvell,pins = "mpp47"; + marvell,function = "gpio"; + }; + + pmx_power_resume_clk: pmx-power-resume-clk { + marvell,pins = "mpp49"; + marvell,function = "gpio"; + }; + }; + + i2c@11000 { + status = "okay"; + + pcf8563: pcf8563@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + }; + }; + + regulators { + usb0_power: regulator@1 { + enable-active-high; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-0 = <&pmx_led_hdd2_green &pmx_led_hdd2_red + &pmx_led_usb_green + &pmx_led_sys_green &pmx_led_sys_orange + &pmx_led_copy_green &pmx_led_copy_red + &pmx_led_hdd1_green &pmx_led_hdd1_red>; + pinctrl-names = "default"; + + green-sys { + label = "nsa320:green:sys"; + gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>; + }; + orange-sys { + label = "nsa320:orange:sys"; + gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>; + }; + green-hdd1 { + label = "nsa320:green:hdd1"; + gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; + }; + red-hdd1 { + label = "nsa320:red:hdd1"; + gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; + }; + green-hdd2 { + label = "nsa320:green:hdd2"; + gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; + }; + red-hdd2 { + label = "nsa320:red:hdd2"; + gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; + }; + green-usb { + label = "nsa320:green:usb"; + gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; + }; + green-copy { + label = "nsa320:green:copy"; + gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; + }; + red-copy { + label = "nsa320:red:copy"; + gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; + }; + }; + + /* The following pins are currently not assigned to a driver, + some of them should be configured as inputs. + pinctrl-0 = <&pmx_mcu_data &pmx_mcu_clk &pmx_mcu_act + &pmx_htp &pmx_vid_b1 + &pmx_power_resume_data &pmx_power_resume_clk>; */ +}; + +&mdio { + status = "okay"; + ethphy0: ethernet-phy@1 { + reg = <1>; + }; +}; + +ð0 { + status = "okay"; + ethernet0-port@0 { + phy-handle = <ðphy0>; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-nsa310-common.dtsi b/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi index e2cc85cc3b87..2075a2e828f1 100644 --- a/arch/arm/boot/dts/kirkwood-nsa310-common.dtsi +++ b/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi @@ -15,17 +15,42 @@ }; ocp@f1000000 { - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { - pmx_usb_power_off: pmx-usb-power-off { + pmx_usb_power: pmx-usb-power { marvell,pins = "mpp21"; marvell,function = "gpio"; }; + pmx_pwr_off: pmx-pwr-off { marvell,pins = "mpp48"; marvell,function = "gpio"; }; + pmx_btn_reset: pmx-btn-reset { + marvell,pins = "mpp36"; + marvell,function = "gpio"; + }; + + pmx_btn_copy: pmx-btn-copy { + marvell,pins = "mpp37"; + marvell,function = "gpio"; + }; + + pmx_btn_power: pmx-btn-power { + marvell,pins = "mpp46"; + marvell,function = "gpio"; + }; + + pmx_led_copy_green: pmx-led-copy-green { + marvell,pins = "mpp39"; + marvell,function = "gpio"; + }; + + pmx_led_copy_red: pmx-led-copy-red { + marvell,pins = "mpp40"; + marvell,function = "gpio"; + }; }; serial@12000 { @@ -45,17 +70,42 @@ gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>; }; + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&pmx_btn_reset &pmx_btn_copy &pmx_btn_power>; + pinctrl-names = "default"; + + button@1 { + label = "Power Button"; + linux,code = <KEY_POWER>; + gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>; + }; + button@2 { + label = "Copy Button"; + linux,code = <KEY_COPY>; + gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; + }; + button@3 { + label = "Reset Button"; + linux,code = <KEY_RESTART>; + gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; + }; + }; + + regulators { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <0>; - pinctrl-0 = <&pmx_usb_power_off>; + pinctrl-0 = <&pmx_usb_power>; pinctrl-names = "default"; - usb0_power_off: regulator@1 { + usb0_power: regulator@1 { compatible = "regulator-fixed"; reg = <1>; - regulator-name = "USB Power Off"; + regulator-name = "USB Power"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; regulator-always-on; diff --git a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts index 0650beafc1de..fb9dc227255d 100644 --- a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts +++ b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts @@ -14,19 +14,16 @@ chosen { bootargs = "console=ttyS0,115200n8 earlyprintk"; + stdout-path = &uart0; }; ocp@f1000000 { serial@12000 { - status = "ok"; - pinctrl-0 = <&pmx_uart0>; - pinctrl-names = "default"; + status = "okay"; }; serial@12100 { - status = "ok"; - pinctrl-0 = <&pmx_uart1>; - pinctrl-names = "default"; + status = "okay"; }; sata@80000 { @@ -36,8 +33,6 @@ i2c@11100 { status = "okay"; - pinctrl-0 = <&pmx_twsi1>; - pinctrl-names = "default"; s35390a: s35390a@30 { compatible = "sii,s35390a"; @@ -45,7 +40,7 @@ }; }; - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { pinctrl-0 = <&pmx_dip_switches &pmx_gpio_header>; pinctrl-names = "default"; @@ -133,8 +128,6 @@ &nand { chip-delay = <25>; status = "okay"; - pinctrl-0 = <&pmx_nand>; - pinctrl-names = "default"; partition@0 { label = "uboot"; diff --git a/arch/arm/boot/dts/kirkwood-openblocks_a7.dts b/arch/arm/boot/dts/kirkwood-openblocks_a7.dts index 38520a287514..d5e3bc518968 100644 --- a/arch/arm/boot/dts/kirkwood-openblocks_a7.dts +++ b/arch/arm/boot/dts/kirkwood-openblocks_a7.dts @@ -26,19 +26,16 @@ chosen { bootargs = "console=ttyS0,115200n8 earlyprintk"; + stdout-path = &uart0; }; ocp@f1000000 { serial@12000 { - status = "ok"; - pinctrl-0 = <&pmx_uart0>; - pinctrl-names = "default"; + status = "okay"; }; serial@12100 { - status = "ok"; - pinctrl-0 = <&pmx_uart1>; - pinctrl-names = "default"; + status = "okay"; }; sata@80000 { @@ -48,8 +45,6 @@ i2c@11100 { status = "okay"; - pinctrl-0 = <&pmx_twsi1>; - pinctrl-names = "default"; s24c02: s24c02@50 { compatible = "atmel,24c02"; @@ -57,7 +52,7 @@ }; }; - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { pinctrl-0 = <&pmx_dip_switches &pmx_gpio_header>; pinctrl-names = "default"; @@ -109,13 +104,6 @@ marvell,pins = "mpp41", "mpp42", "mpp43"; marvell,function = "gpio"; }; - - pmx_ge1: pmx-ge1 { - marvell,pins = "mpp20", "mpp21", "mpp22", "mpp23", - "mpp24", "mpp25", "mpp26", "mpp27", - "mpp30", "mpp31", "mpp32", "mpp33"; - marvell,function = "ge1"; - }; }; }; @@ -158,8 +146,6 @@ &nand { chip-delay = <25>; status = "okay"; - pinctrl-0 = <&pmx_nand>; - pinctrl-names = "default"; partition@0 { label = "uboot"; @@ -213,8 +199,6 @@ ð1 { status = "okay"; - pinctrl-0 = <&pmx_ge1>; - pinctrl-names = "default"; ethernet1-port@0 { phy-handle = <ðphy1>; }; diff --git a/arch/arm/boot/dts/kirkwood-openrd-base.dts b/arch/arm/boot/dts/kirkwood-openrd-base.dts new file mode 100644 index 000000000000..8af58999606d --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-openrd-base.dts @@ -0,0 +1,42 @@ +/* + * Marvell OpenRD Base Board Description + * + * Andrew Lunn <andrew@lunn.ch> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * This file contains the definitions that are specific to OpenRD + * base variant of the Marvell Kirkwood Development Board. + */ + +/dts-v1/; + +#include "kirkwood-openrd.dtsi" + +/ { + model = "OpenRD Base"; + compatible = "marvell,openrd-base", "marvell,openrd", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + ocp@f1000000 { + serial@12100 { + status = "okay"; + }; + }; +}; + +&mdio { + status = "okay"; + + ethphy0: ethernet-phy@8 { + reg = <8>; + }; +}; + +ð0 { + status = "okay"; + ethernet0-port@0 { + phy-handle = <ðphy0>; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-openrd-client.dts b/arch/arm/boot/dts/kirkwood-openrd-client.dts new file mode 100644 index 000000000000..887b9c1fee43 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-openrd-client.dts @@ -0,0 +1,73 @@ +/* + * Marvell OpenRD Client Board Description + * + * Andrew Lunn <andrew@lunn.ch> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * This file contains the definitions that are specific to OpenRD + * client variant of the Marvell Kirkwood Development Board. + */ + +/dts-v1/; + +#include "kirkwood-openrd.dtsi" + +/ { + model = "OpenRD Client"; + compatible = "marvell,openrd-client", "marvell,openrd", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + ocp@f1000000 { + i2c@11000 { + status = "okay"; + clock-frequency = <400000>; + + cs42l51: cs42l51@4a { + compatible = "cirrus,cs42l51"; + reg = <0x4a>; + }; + }; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,mclk-fs = <256>; + + simple-audio-card,cpu { + sound-dai = <&audio0>; + }; + + simple-audio-card,codec { + sound-dai = <&cs42l51>; + }; + }; +}; + +&mdio { + status = "okay"; + + ethphy0: ethernet-phy@8 { + reg = <8>; + }; + ethphy1: ethernet-phy@24 { + reg = <24>; + }; +}; + +ð0 { + status = "okay"; + ethernet0-port@0 { + phy-handle = <ðphy0>; + }; +}; + +ð1 { + status = "okay"; + ethernet1-port@0 { + phy-handle = <ðphy1>; + }; +}; + diff --git a/arch/arm/boot/dts/kirkwood-openrd-ultimate.dts b/arch/arm/boot/dts/kirkwood-openrd-ultimate.dts new file mode 100644 index 000000000000..9f12f8b53e24 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-openrd-ultimate.dts @@ -0,0 +1,58 @@ +/* + * Marvell OpenRD Ultimate Board Description + * + * Andrew Lunn <andrew@lunn.ch> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * This file contains the definitions that are specific to OpenRD + * ultimate variant of the Marvell Kirkwood Development Board. + */ + +/dts-v1/; + +#include "kirkwood-openrd.dtsi" + +/ { + model = "OpenRD Ultimate"; + compatible = "marvell,openrd-ultimate", "marvell,openrd", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + ocp@f1000000 { + i2c@11000 { + status = "okay"; + clock-frequency = <400000>; + + cs42l51: cs42l51@4a { + compatible = "cirrus,cs42l51"; + reg = <0x4a>; + }; + }; + }; +}; + +&mdio { + status = "okay"; + + ethphy0: ethernet-phy@0 { + reg = <0>; + }; + ethphy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +ð0 { + status = "okay"; + ethernet0-port@0 { + phy-handle = <ðphy0>; + }; +}; + +ð1 { + status = "okay"; + ethernet1-port@0 { + phy-handle = <ðphy1>; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-openrd.dtsi b/arch/arm/boot/dts/kirkwood-openrd.dtsi new file mode 100644 index 000000000000..d3330dadf7ed --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-openrd.dtsi @@ -0,0 +1,90 @@ +/* + * Marvell OpenRD (Base|Client|Ultimate) Board Description + * + * Andrew Lunn <andrew@lunn.ch> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * This file contains the definitions that are common between the three + * variants of the Marvell Kirkwood Development Board. + */ + +#include "kirkwood.dtsi" +#include "kirkwood-6281.dtsi" + +/ { + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8"; + stdout-path = &uart0; + }; + + mbus { + pcie-controller { + status = "okay"; + + pcie@1,0 { + status = "okay"; + }; + }; + }; + + ocp@f1000000 { + pinctrl: pin-controller@10000 { + pinctrl-0 = <&pmx_select28 &pmx_sdio_cd &pmx_select34>; + pinctrl-names = "default"; + + pmx_select28: pmx-select-uart-sd { + marvell,pins = "mpp28"; + marvell,function = "gpio"; + }; + pmx_sdio_cd: pmx-sdio-cd { + marvell,pins = "mpp29"; + marvell,function = "gpio"; + }; + pmx_select34: pmx-select-rs232-rs484 { + marvell,pins = "mpp34"; + marvell,function = "gpio"; + }; + }; + serial@12000 { + status = "okay"; + + }; + sata@80000 { + status = "okay"; + nr-ports = <2>; + }; + mvsdio@90000 { + status = "okay"; + cd-gpios = <&gpio0 29 9>; + }; + }; +}; + +&nand { + status = "okay"; + pinctrl-0 = <&pmx_nand>; + pinctrl-names = "default"; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x100000>; + }; + + partition@100000 { + label = "uImage"; + reg = <0x0100000 0x400000>; + }; + + partition@600000 { + label = "root"; + reg = <0x0600000 0x1FA00000>; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-rd88f6192.dts b/arch/arm/boot/dts/kirkwood-rd88f6192.dts index e9dd85049297..35a29dee8dd8 100644 --- a/arch/arm/boot/dts/kirkwood-rd88f6192.dts +++ b/arch/arm/boot/dts/kirkwood-rd88f6192.dts @@ -26,6 +26,7 @@ chosen { bootargs = "console=ttyS0,115200n8"; + stdout-path = &uart0; }; mbus { @@ -39,7 +40,7 @@ }; ocp@f1000000 { - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { pinctrl-0 = <&pmx_usb_power>; pinctrl-names = "default"; @@ -56,8 +57,6 @@ spi@10600 { status = "okay"; - pinctrl-0 = <&pmx_spi>; - pinctrl-names = "default"; m25p128@0 { #address-cells = <1>; diff --git a/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi b/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi index d6368c39102e..26cf0e0ccefd 100644 --- a/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi +++ b/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi @@ -22,6 +22,7 @@ chosen { bootargs = "console=ttyS0,115200n8"; + stdout-path = &uart0; }; mbus { @@ -35,7 +36,7 @@ }; ocp@f1000000 { - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { pinctrl-0 = <&pmx_sdio_cd>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/kirkwood-rs212.dts b/arch/arm/boot/dts/kirkwood-rs212.dts index 93ec3d00c6ab..3b19f1fd4cac 100644 --- a/arch/arm/boot/dts/kirkwood-rs212.dts +++ b/arch/arm/boot/dts/kirkwood-rs212.dts @@ -24,6 +24,7 @@ chosen { bootargs = "console=ttyS0,115200n8"; + stdout-path = &uart0; }; gpio-fan-100-15-35-3 { diff --git a/arch/arm/boot/dts/kirkwood-rs409.dts b/arch/arm/boot/dts/kirkwood-rs409.dts index 311df4e5aa28..921ca49e85a4 100644 --- a/arch/arm/boot/dts/kirkwood-rs409.dts +++ b/arch/arm/boot/dts/kirkwood-rs409.dts @@ -24,6 +24,7 @@ chosen { bootargs = "console=ttyS0,115200n8"; + stdout-path = &uart0; }; gpio-fan-150-15-18 { diff --git a/arch/arm/boot/dts/kirkwood-rs411.dts b/arch/arm/boot/dts/kirkwood-rs411.dts index f90da850bb31..02852b0c809f 100644 --- a/arch/arm/boot/dts/kirkwood-rs411.dts +++ b/arch/arm/boot/dts/kirkwood-rs411.dts @@ -24,6 +24,7 @@ chosen { bootargs = "console=ttyS0,115200n8"; + stdout-path = &uart0; }; gpio-fan-100-15-35-3 { diff --git a/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi b/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi index 1ff848d570a9..7196c7f3e109 100644 --- a/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi +++ b/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi @@ -17,10 +17,11 @@ chosen { bootargs = "console=ttyS0,115200n8 earlyprintk"; + stdout-path = &uart0; }; ocp@f1000000 { - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { pmx_usb_power_enable: pmx-usb-power-enable { marvell,pins = "mpp29"; @@ -44,8 +45,6 @@ }; }; serial@12000 { - pinctrl-0 = <&pmx_uart0>; - pinctrl-names = "default"; status = "okay"; }; }; @@ -72,8 +71,6 @@ }; &nand { - pinctrl-0 = <&pmx_nand>; - pinctrl-names = "default"; status = "okay"; partition@0 { diff --git a/arch/arm/boot/dts/kirkwood-synology.dtsi b/arch/arm/boot/dts/kirkwood-synology.dtsi index 4227c974729d..811e0971fc58 100644 --- a/arch/arm/boot/dts/kirkwood-synology.dtsi +++ b/arch/arm/boot/dts/kirkwood-synology.dtsi @@ -25,7 +25,7 @@ }; ocp@f1000000 { - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { pmx_alarmled_12: pmx-alarmled-12 { marvell,pins = "mpp12"; marvell,function = "gpio"; @@ -213,8 +213,6 @@ spi@10600 { status = "okay"; - pinctrl-0 = <&pmx_spi>; - pinctrl-names = "default"; m25p80@0 { #address-cells = <1>; @@ -259,8 +257,6 @@ i2c@11000 { status = "okay"; clock-frequency = <400000>; - pinctrl-0 = <&pmx_twsi0>; - pinctrl-names = "default"; rs5c372: rs5c372@32 { status = "disabled"; @@ -277,14 +273,10 @@ serial@12000 { status = "okay"; - pinctrl-0 = <&pmx_uart0>; - pinctrl-names = "default"; }; serial@12100 { status = "okay"; - pinctrl-0 = <&pmx_uart1>; - pinctrl-names = "default"; }; poweroff@12100 { diff --git a/arch/arm/boot/dts/kirkwood-t5325.dts b/arch/arm/boot/dts/kirkwood-t5325.dts index 0bd70d928c69..610ec0f95858 100644 --- a/arch/arm/boot/dts/kirkwood-t5325.dts +++ b/arch/arm/boot/dts/kirkwood-t5325.dts @@ -27,6 +27,7 @@ chosen { bootargs = "console=ttyS0,115200n8"; + stdout-path = &uart0; }; mbus { @@ -40,7 +41,7 @@ }; ocp@f1000000 { - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { pinctrl-0 = <&pmx_i2s &pmx_sysrst>; pinctrl-names = "default"; @@ -64,10 +65,6 @@ marvell,function = "gpio"; }; - /* - * Redefined from kirkwood-6281.dtsi, because - * we don't use SPI CS on MPP0, but on MPP7. - */ pmx_spi: pmx-spi { marvell,pins = "mpp1", "mpp2", "mpp3", "mpp7"; marvell,function = "spi"; @@ -86,8 +83,6 @@ }; spi@10600 { - pinctrl-0 = <&pmx_spi>; - pinctrl-names = "default"; status = "okay"; flash@0 { @@ -127,6 +122,14 @@ i2c@11000 { status = "okay"; + + alc5621: alc5621@1a { + compatible = "realtek,alc5621"; + reg = <0x1a>; + #sound-dai-cells = <0>; + add-ctrl = <0x3700>; + jack-det-ctrl = <0x4810>; + }; }; serial@12000 { @@ -184,6 +187,31 @@ gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>; }; + sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,routing = + "Headphone Jack", "HPL", + "Headphone Jack", "HPR", + "Speaker", "SPKOUT", + "Speaker", "SPKOUTN", + "MIC1", "Mic Jack", + "MIC2", "Mic Jack"; + simple-audio-card,widgets = + "Headphone", "Headphone Jack", + "Speaker", "Speaker", + "Microphone", "Mic Jack"; + + simple-audio-card,mclk-fs = <256>; + + simple-audio-card,cpu { + sound-dai = <&audio>; + }; + + simple-audio-card,codec { + sound-dai = <&alc5621>; + }; + }; }; &mdio { diff --git a/arch/arm/boot/dts/kirkwood-topkick.dts b/arch/arm/boot/dts/kirkwood-topkick.dts index 5fc817c2cb87..f5c8c0dd41dc 100644 --- a/arch/arm/boot/dts/kirkwood-topkick.dts +++ b/arch/arm/boot/dts/kirkwood-topkick.dts @@ -14,10 +14,11 @@ chosen { bootargs = "console=ttyS0,115200n8 earlyprintk"; + stdout-path = &uart0; }; ocp@f1000000 { - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { /* * Switch positions * @@ -85,9 +86,7 @@ }; serial@12000 { - status = "ok"; - pinctrl-0 = <&pmx_uart0>; - pinctrl-names = "default"; + status = "okay"; }; sata@80000 { @@ -96,9 +95,7 @@ }; i2c@11000 { - status = "ok"; - pinctrl-0 = <&pmx_twsi0>; - pinctrl-names = "default"; + status = "okay"; }; mvsdio@90000 { @@ -175,8 +172,6 @@ &nand { status = "okay"; - pinctrl-0 = <&pmx_nand>; - pinctrl-names = "default"; partition@0 { label = "u-boot"; diff --git a/arch/arm/boot/dts/kirkwood-ts219-6281.dts b/arch/arm/boot/dts/kirkwood-ts219-6281.dts index c17ae45e19be..9767d73f3857 100644 --- a/arch/arm/boot/dts/kirkwood-ts219-6281.dts +++ b/arch/arm/boot/dts/kirkwood-ts219-6281.dts @@ -6,7 +6,7 @@ / { ocp@f1000000 { - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { pinctrl-0 = <&pmx_ram_size &pmx_board_id>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/kirkwood-ts219-6282.dts b/arch/arm/boot/dts/kirkwood-ts219-6282.dts index 0713d072758a..bfc1a32d4e42 100644 --- a/arch/arm/boot/dts/kirkwood-ts219-6282.dts +++ b/arch/arm/boot/dts/kirkwood-ts219-6282.dts @@ -16,7 +16,7 @@ }; ocp@f1000000 { - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { pinctrl-0 = <&pmx_ram_size &pmx_board_id>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/kirkwood-ts219.dtsi b/arch/arm/boot/dts/kirkwood-ts219.dtsi index 911f3a8cee23..df7f15276575 100644 --- a/arch/arm/boot/dts/kirkwood-ts219.dtsi +++ b/arch/arm/boot/dts/kirkwood-ts219.dtsi @@ -9,6 +9,7 @@ chosen { bootargs = "console=ttyS0,115200n8"; + stdout-path = &uart0; }; mbus { @@ -25,8 +26,6 @@ i2c@11000 { status = "okay"; clock-frequency = <400000>; - pinctrl-0 = <&pmx_twsi0>; - pinctrl-names = "default"; s35390a: s35390a@30 { compatible = "s35390a"; @@ -34,16 +33,10 @@ }; }; serial@12000 { - clock-frequency = <200000000>; status = "okay"; - pinctrl-0 = <&pmx_uart0>; - pinctrl-names = "default"; }; serial@12100 { - clock-frequency = <200000000>; status = "okay"; - pinctrl-0 = <&pmx_uart1>; - pinctrl-names = "default"; }; poweroff@12100 { compatible = "qnap,power-off"; @@ -52,8 +45,6 @@ }; spi@10600 { status = "okay"; - pinctrl-0 = <&pmx_spi>; - pinctrl-names = "default"; m25p128@0 { #address-cells = <1>; diff --git a/arch/arm/boot/dts/kirkwood-ts419.dtsi b/arch/arm/boot/dts/kirkwood-ts419.dtsi index 1a9c624c7a92..30ab93bfb1e4 100644 --- a/arch/arm/boot/dts/kirkwood-ts419.dtsi +++ b/arch/arm/boot/dts/kirkwood-ts419.dtsi @@ -14,7 +14,7 @@ compatible = "qnap,ts419", "marvell,kirkwood"; ocp@f1000000 { - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { pinctrl-names = "default"; pmx_USB_copy_button: pmx-USB-copy-button { diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi index 90384587c278..afc640cd80c5 100644 --- a/arch/arm/boot/dts/kirkwood.dtsi +++ b/arch/arm/boot/dts/kirkwood.dtsi @@ -40,7 +40,7 @@ pcie-mem-aperture = <0xe0000000 0x10000000>; /* 256 MiB memory space */ pcie-io-aperture = <0xf2000000 0x100000>; /* 1 MiB I/O space */ - crypto@0301 { + cesa: crypto@0301 { compatible = "marvell,orion-crypto"; reg = <MBUS_ID(0xf0, 0x01) 0x30000 0x10000>, <MBUS_ID(0x03, 0x01) 0 0x800>; @@ -61,6 +61,8 @@ chip-delay = <25>; /* set partition map and/or chip-delay in board dts */ clocks = <&gate_clk 7>; + pinctrl-0 = <&pmx_nand>; + pinctrl-names = "default"; status = "disabled"; }; }; @@ -71,13 +73,59 @@ #address-cells = <1>; #size-cells = <1>; + pinctrl: pin-controller@10000 { + /* set compatible property in SoC file */ + reg = <0x10000 0x20>; + + pmx_ge1: pmx-ge1 { + marvell,pins = "mpp20", "mpp21", "mpp22", "mpp23", + "mpp24", "mpp25", "mpp26", "mpp27", + "mpp30", "mpp31", "mpp32", "mpp33"; + marvell,function = "ge1"; + }; + + pmx_nand: pmx-nand { + marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3", + "mpp4", "mpp5", "mpp18", "mpp19"; + marvell,function = "nand"; + }; + + /* + * Default SPI0 pinctrl setting with CSn on mpp0, + * overwrite marvell,pins on board level if required. + */ + pmx_spi: pmx-spi { + marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3"; + marvell,function = "spi"; + }; + + pmx_twsi0: pmx-twsi0 { + marvell,pins = "mpp8", "mpp9"; + marvell,function = "twsi0"; + }; + + /* + * Default UART pinctrl setting without RTS/CTS, + * overwrite marvell,pins on board level if required. + */ + pmx_uart0: pmx-uart0 { + marvell,pins = "mpp10", "mpp11"; + marvell,function = "uart0"; + }; + + pmx_uart1: pmx-uart1 { + marvell,pins = "mpp13", "mpp14"; + marvell,function = "uart1"; + }; + }; + core_clk: core-clocks@10030 { compatible = "marvell,kirkwood-core-clock"; reg = <0x10030 0x4>; #clock-cells = <1>; }; - spi@10600 { + spi0: spi@10600 { compatible = "marvell,orion-spi"; #address-cells = <1>; #size-cells = <0>; @@ -85,6 +133,8 @@ interrupts = <23>; reg = <0x10600 0x28>; clocks = <&gate_clk 7>; + pinctrl-0 = <&pmx_spi>; + pinctrl-names = "default"; status = "disabled"; }; @@ -120,24 +170,30 @@ interrupts = <29>; clock-frequency = <100000>; clocks = <&gate_clk 7>; + pinctrl-0 = <&pmx_twsi0>; + pinctrl-names = "default"; status = "disabled"; }; - serial@12000 { + uart0: serial@12000 { compatible = "ns16550a"; reg = <0x12000 0x100>; reg-shift = <2>; interrupts = <33>; clocks = <&gate_clk 7>; + pinctrl-0 = <&pmx_uart0>; + pinctrl-names = "default"; status = "disabled"; }; - serial@12100 { + uart1: serial@12100 { compatible = "ns16550a"; reg = <0x12100 0x100>; reg-shift = <2>; interrupts = <34>; clocks = <&gate_clk 7>; + pinctrl-0 = <&pmx_uart1>; + pinctrl-names = "default"; status = "disabled"; }; @@ -146,7 +202,7 @@ reg = <0x20000 0x80>, <0x1500 0x20>; }; - system-controller@20000 { + sysc: system-controller@20000 { compatible = "marvell,orion-system-controller"; reg = <0x20000 0x120>; }; @@ -196,7 +252,7 @@ status = "okay"; }; - ehci@50000 { + usb0: ehci@50000 { compatible = "marvell,orion-ehci"; reg = <0x50000 0x1000>; interrupts = <19>; @@ -204,7 +260,7 @@ status = "okay"; }; - xor@60800 { + dma0: xor@60800 { compatible = "marvell,orion-xor"; reg = <0x60800 0x100 0x60A00 0x100>; @@ -224,7 +280,7 @@ }; }; - xor@60900 { + dma1: xor@60900 { compatible = "marvell,orion-xor"; reg = <0x60900 0x100 0x60B00 0x100>; @@ -282,6 +338,8 @@ reg = <0x76000 0x4000>; clocks = <&gate_clk 19>; marvell,tx-checksum-limit = <1600>; + pinctrl-0 = <&pmx_ge1>; + pinctrl-names = "default"; status = "disabled"; ethernet1-port@0 { @@ -314,6 +372,7 @@ audio0: audio-controller@a0000 { compatible = "marvell,kirkwood-audio"; + #sound-dai-cells = <0>; reg = <0xa0000 0x2210>; interrupts = <24>; clocks = <&gate_clk 9>; diff --git a/arch/arm/boot/dts/omap2420-clocks.dtsi b/arch/arm/boot/dts/omap2420-clocks.dtsi new file mode 100644 index 000000000000..ce8c742d7e92 --- /dev/null +++ b/arch/arm/boot/dts/omap2420-clocks.dtsi @@ -0,0 +1,270 @@ +/* + * Device Tree Source for OMAP2420 clock data + * + * Copyright (C) 2014 Texas Instruments, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&prcm_clocks { + sys_clkout2_src_gate: sys_clkout2_src_gate { + #clock-cells = <0>; + compatible = "ti,composite-no-wait-gate-clock"; + clocks = <&core_ck>; + ti,bit-shift = <15>; + reg = <0x0070>; + }; + + sys_clkout2_src_mux: sys_clkout2_src_mux { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clocks = <&core_ck>, <&sys_ck>, <&func_96m_ck>, <&func_54m_ck>; + ti,bit-shift = <8>; + reg = <0x0070>; + }; + + sys_clkout2_src: sys_clkout2_src { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&sys_clkout2_src_gate>, <&sys_clkout2_src_mux>; + }; + + sys_clkout2: sys_clkout2 { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&sys_clkout2_src>; + ti,bit-shift = <11>; + ti,max-div = <64>; + reg = <0x0070>; + ti,index-power-of-two; + }; + + dsp_gate_ick: dsp_gate_ick { + #clock-cells = <0>; + compatible = "ti,composite-interface-clock"; + clocks = <&dsp_fck>; + ti,bit-shift = <1>; + reg = <0x0810>; + }; + + dsp_div_ick: dsp_div_ick { + #clock-cells = <0>; + compatible = "ti,composite-divider-clock"; + clocks = <&dsp_fck>; + ti,bit-shift = <5>; + ti,max-div = <3>; + reg = <0x0840>; + ti,index-starts-at-one; + }; + + dsp_ick: dsp_ick { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&dsp_gate_ick>, <&dsp_div_ick>; + }; + + iva1_gate_ifck: iva1_gate_ifck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clocks = <&core_ck>; + ti,bit-shift = <10>; + reg = <0x0800>; + }; + + iva1_div_ifck: iva1_div_ifck { + #clock-cells = <0>; + compatible = "ti,composite-divider-clock"; + clocks = <&core_ck>; + ti,bit-shift = <8>; + reg = <0x0840>; + ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>, <0>, <0>, <0>, <12>; + }; + + iva1_ifck: iva1_ifck { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&iva1_gate_ifck>, <&iva1_div_ifck>; + }; + + iva1_ifck_div: iva1_ifck_div { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&iva1_ifck>; + clock-mult = <1>; + clock-div = <2>; + }; + + iva1_mpu_int_ifck: iva1_mpu_int_ifck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clocks = <&iva1_ifck_div>; + ti,bit-shift = <8>; + reg = <0x0800>; + }; + + wdt3_ick: wdt3_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <28>; + reg = <0x0210>; + }; + + wdt3_fck: wdt3_fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clocks = <&func_32k_ck>; + ti,bit-shift = <28>; + reg = <0x0200>; + }; + + mmc_ick: mmc_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <26>; + reg = <0x0210>; + }; + + mmc_fck: mmc_fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clocks = <&func_96m_ck>; + ti,bit-shift = <26>; + reg = <0x0200>; + }; + + eac_ick: eac_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <24>; + reg = <0x0210>; + }; + + eac_fck: eac_fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clocks = <&func_96m_ck>; + ti,bit-shift = <24>; + reg = <0x0200>; + }; + + i2c1_fck: i2c1_fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clocks = <&func_12m_ck>; + ti,bit-shift = <19>; + reg = <0x0200>; + }; + + i2c2_fck: i2c2_fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clocks = <&func_12m_ck>; + ti,bit-shift = <20>; + reg = <0x0200>; + }; + + vlynq_ick: vlynq_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&core_l3_ck>; + ti,bit-shift = <3>; + reg = <0x0210>; + }; + + vlynq_gate_fck: vlynq_gate_fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clocks = <&core_ck>; + ti,bit-shift = <3>; + reg = <0x0200>; + }; + + core_d18_ck: core_d18_ck { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&core_ck>; + clock-mult = <1>; + clock-div = <18>; + }; + + vlynq_mux_fck: vlynq_mux_fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clocks = <&func_96m_ck>, <&core_ck>, <&core_d2_ck>, <&core_d3_ck>, <&core_d4_ck>, <&dummy_ck>, <&core_d6_ck>, <&dummy_ck>, <&core_d8_ck>, <&core_d9_ck>, <&dummy_ck>, <&dummy_ck>, <&core_d12_ck>, <&dummy_ck>, <&dummy_ck>, <&dummy_ck>, <&core_d16_ck>, <&dummy_ck>, <&core_d18_ck>; + ti,bit-shift = <15>; + reg = <0x0240>; + }; + + vlynq_fck: vlynq_fck { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&vlynq_gate_fck>, <&vlynq_mux_fck>; + }; +}; + +&prcm_clockdomains { + gfx_clkdm: gfx_clkdm { + compatible = "ti,clockdomain"; + clocks = <&gfx_ick>; + }; + + core_l3_clkdm: core_l3_clkdm { + compatible = "ti,clockdomain"; + clocks = <&cam_fck>, <&vlynq_ick>, <&usb_fck>; + }; + + wkup_clkdm: wkup_clkdm { + compatible = "ti,clockdomain"; + clocks = <&dpll_ck>, <&emul_ck>, <&gpt1_ick>, <&gpios_ick>, + <&gpios_fck>, <&mpu_wdt_ick>, <&mpu_wdt_fck>, + <&sync_32k_ick>, <&wdt1_ick>, <&omapctrl_ick>; + }; + + iva1_clkdm: iva1_clkdm { + compatible = "ti,clockdomain"; + clocks = <&iva1_mpu_int_ifck>; + }; + + dss_clkdm: dss_clkdm { + compatible = "ti,clockdomain"; + clocks = <&dss_ick>, <&dss_54m_fck>; + }; + + core_l4_clkdm: core_l4_clkdm { + compatible = "ti,clockdomain"; + clocks = <&ssi_l4_ick>, <&gpt2_ick>, <&gpt3_ick>, <&gpt4_ick>, + <&gpt5_ick>, <&gpt6_ick>, <&gpt7_ick>, <&gpt8_ick>, + <&gpt9_ick>, <&gpt10_ick>, <&gpt11_ick>, <&gpt12_ick>, + <&mcbsp1_ick>, <&mcbsp2_ick>, <&mcspi1_ick>, + <&mcspi1_fck>, <&mcspi2_ick>, <&mcspi2_fck>, + <&uart1_ick>, <&uart1_fck>, <&uart2_ick>, <&uart2_fck>, + <&uart3_ick>, <&uart3_fck>, <&cam_ick>, + <&mailboxes_ick>, <&wdt4_ick>, <&wdt4_fck>, + <&wdt3_ick>, <&wdt3_fck>, <&mspro_ick>, <&mspro_fck>, + <&mmc_ick>, <&mmc_fck>, <&fac_ick>, <&fac_fck>, + <&eac_ick>, <&eac_fck>, <&hdq_ick>, <&hdq_fck>, + <&i2c1_ick>, <&i2c1_fck>, <&i2c2_ick>, <&i2c2_fck>, + <&des_ick>, <&sha_ick>, <&rng_ick>, <&aes_ick>, + <&pka_ick>; + }; +}; + +&func_96m_ck { + compatible = "fixed-factor-clock"; + clocks = <&apll96_ck>; + clock-mult = <1>; + clock-div = <1>; +}; + +&dsp_div_fck { + ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>, <0>, <0>, <0>, <12>; +}; + +&ssi_ssr_sst_div_fck { + ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>; +}; diff --git a/arch/arm/boot/dts/omap2420.dtsi b/arch/arm/boot/dts/omap2420.dtsi index 2d9979835f24..e83b0468080c 100644 --- a/arch/arm/boot/dts/omap2420.dtsi +++ b/arch/arm/boot/dts/omap2420.dtsi @@ -14,6 +14,32 @@ compatible = "ti,omap2420", "ti,omap2"; ocp { + prcm: prcm@48008000 { + compatible = "ti,omap2-prcm"; + reg = <0x48008000 0x1000>; + + prcm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + prcm_clockdomains: clockdomains { + }; + }; + + scrm: scrm@48000000 { + compatible = "ti,omap2-scrm"; + reg = <0x48000000 0x1000>; + + scrm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + scrm_clockdomains: clockdomains { + }; + }; + counter32k: counter@48004000 { compatible = "ti,omap-counter32k"; reg = <0x48004000 0x20>; diff --git a/arch/arm/boot/dts/omap2430-clocks.dtsi b/arch/arm/boot/dts/omap2430-clocks.dtsi new file mode 100644 index 000000000000..805f75df1cf2 --- /dev/null +++ b/arch/arm/boot/dts/omap2430-clocks.dtsi @@ -0,0 +1,344 @@ +/* + * Device Tree Source for OMAP2430 clock data + * + * Copyright (C) 2014 Texas Instruments, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&scrm_clocks { + mcbsp3_mux_fck: mcbsp3_mux_fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clocks = <&func_96m_ck>, <&mcbsp_clks>; + reg = <0x02e8>; + }; + + mcbsp3_fck: mcbsp3_fck { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&mcbsp3_gate_fck>, <&mcbsp3_mux_fck>; + }; + + mcbsp4_mux_fck: mcbsp4_mux_fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clocks = <&func_96m_ck>, <&mcbsp_clks>; + ti,bit-shift = <2>; + reg = <0x02e8>; + }; + + mcbsp4_fck: mcbsp4_fck { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&mcbsp4_gate_fck>, <&mcbsp4_mux_fck>; + }; + + mcbsp5_mux_fck: mcbsp5_mux_fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clocks = <&func_96m_ck>, <&mcbsp_clks>; + ti,bit-shift = <4>; + reg = <0x02e8>; + }; + + mcbsp5_fck: mcbsp5_fck { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&mcbsp5_gate_fck>, <&mcbsp5_mux_fck>; + }; +}; + +&prcm_clocks { + iva2_1_gate_ick: iva2_1_gate_ick { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clocks = <&dsp_fck>; + ti,bit-shift = <0>; + reg = <0x0800>; + }; + + iva2_1_div_ick: iva2_1_div_ick { + #clock-cells = <0>; + compatible = "ti,composite-divider-clock"; + clocks = <&dsp_fck>; + ti,bit-shift = <5>; + ti,max-div = <3>; + reg = <0x0840>; + ti,index-starts-at-one; + }; + + iva2_1_ick: iva2_1_ick { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&iva2_1_gate_ick>, <&iva2_1_div_ick>; + }; + + mdm_gate_ick: mdm_gate_ick { + #clock-cells = <0>; + compatible = "ti,composite-interface-clock"; + clocks = <&core_ck>; + ti,bit-shift = <0>; + reg = <0x0c10>; + }; + + mdm_div_ick: mdm_div_ick { + #clock-cells = <0>; + compatible = "ti,composite-divider-clock"; + clocks = <&core_ck>; + reg = <0x0c40>; + ti,dividers = <0>, <1>, <0>, <0>, <4>, <0>, <6>, <0>, <0>, <9>; + }; + + mdm_ick: mdm_ick { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&mdm_gate_ick>, <&mdm_div_ick>; + }; + + mdm_osc_ck: mdm_osc_ck { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&osc_ck>; + ti,bit-shift = <1>; + reg = <0x0c00>; + }; + + mcbsp3_ick: mcbsp3_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <3>; + reg = <0x0214>; + }; + + mcbsp3_gate_fck: mcbsp3_gate_fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clocks = <&mcbsp_clks>; + ti,bit-shift = <3>; + reg = <0x0204>; + }; + + mcbsp4_ick: mcbsp4_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <4>; + reg = <0x0214>; + }; + + mcbsp4_gate_fck: mcbsp4_gate_fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clocks = <&mcbsp_clks>; + ti,bit-shift = <4>; + reg = <0x0204>; + }; + + mcbsp5_ick: mcbsp5_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <5>; + reg = <0x0214>; + }; + + mcbsp5_gate_fck: mcbsp5_gate_fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clocks = <&mcbsp_clks>; + ti,bit-shift = <5>; + reg = <0x0204>; + }; + + mcspi3_ick: mcspi3_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <9>; + reg = <0x0214>; + }; + + mcspi3_fck: mcspi3_fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clocks = <&func_48m_ck>; + ti,bit-shift = <9>; + reg = <0x0204>; + }; + + icr_ick: icr_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&sys_ck>; + ti,bit-shift = <6>; + reg = <0x0410>; + }; + + i2chs1_fck: i2chs1_fck { + #clock-cells = <0>; + compatible = "ti,omap2430-interface-clock"; + clocks = <&func_96m_ck>; + ti,bit-shift = <19>; + reg = <0x0204>; + }; + + i2chs2_fck: i2chs2_fck { + #clock-cells = <0>; + compatible = "ti,omap2430-interface-clock"; + clocks = <&func_96m_ck>; + ti,bit-shift = <20>; + reg = <0x0204>; + }; + + usbhs_ick: usbhs_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&core_l3_ck>; + ti,bit-shift = <6>; + reg = <0x0214>; + }; + + mmchs1_ick: mmchs1_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <7>; + reg = <0x0214>; + }; + + mmchs1_fck: mmchs1_fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clocks = <&func_96m_ck>; + ti,bit-shift = <7>; + reg = <0x0204>; + }; + + mmchs2_ick: mmchs2_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <8>; + reg = <0x0214>; + }; + + mmchs2_fck: mmchs2_fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clocks = <&func_96m_ck>; + ti,bit-shift = <8>; + reg = <0x0204>; + }; + + gpio5_ick: gpio5_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <10>; + reg = <0x0214>; + }; + + gpio5_fck: gpio5_fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clocks = <&func_32k_ck>; + ti,bit-shift = <10>; + reg = <0x0204>; + }; + + mdm_intc_ick: mdm_intc_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <11>; + reg = <0x0214>; + }; + + mmchsdb1_fck: mmchsdb1_fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clocks = <&func_32k_ck>; + ti,bit-shift = <16>; + reg = <0x0204>; + }; + + mmchsdb2_fck: mmchsdb2_fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clocks = <&func_32k_ck>; + ti,bit-shift = <17>; + reg = <0x0204>; + }; +}; + +&prcm_clockdomains { + gfx_clkdm: gfx_clkdm { + compatible = "ti,clockdomain"; + clocks = <&gfx_ick>; + }; + + core_l3_clkdm: core_l3_clkdm { + compatible = "ti,clockdomain"; + clocks = <&cam_fck>, <&usb_fck>, <&usbhs_ick>; + }; + + wkup_clkdm: wkup_clkdm { + compatible = "ti,clockdomain"; + clocks = <&dpll_ck>, <&emul_ck>, <&gpt1_ick>, <&gpios_ick>, + <&gpios_fck>, <&mpu_wdt_ick>, <&mpu_wdt_fck>, + <&sync_32k_ick>, <&wdt1_ick>, <&omapctrl_ick>, + <&icr_ick>; + }; + + dss_clkdm: dss_clkdm { + compatible = "ti,clockdomain"; + clocks = <&dss_ick>, <&dss_54m_fck>; + }; + + core_l4_clkdm: core_l4_clkdm { + compatible = "ti,clockdomain"; + clocks = <&ssi_l4_ick>, <&gpt2_ick>, <&gpt3_ick>, <&gpt4_ick>, + <&gpt5_ick>, <&gpt6_ick>, <&gpt7_ick>, <&gpt8_ick>, + <&gpt9_ick>, <&gpt10_ick>, <&gpt11_ick>, <&gpt12_ick>, + <&mcbsp1_ick>, <&mcbsp2_ick>, <&mcbsp3_ick>, + <&mcbsp4_ick>, <&mcbsp5_ick>, <&mcspi1_ick>, + <&mcspi1_fck>, <&mcspi2_ick>, <&mcspi2_fck>, + <&mcspi3_ick>, <&mcspi3_fck>, <&uart1_ick>, + <&uart1_fck>, <&uart2_ick>, <&uart2_fck>, <&uart3_ick>, + <&uart3_fck>, <&cam_ick>, <&mailboxes_ick>, + <&wdt4_ick>, <&wdt4_fck>, <&mspro_ick>, <&mspro_fck>, + <&fac_ick>, <&fac_fck>, <&hdq_ick>, <&hdq_fck>, + <&i2c1_ick>, <&i2chs1_fck>, <&i2c2_ick>, <&i2chs2_fck>, + <&des_ick>, <&sha_ick>, <&rng_ick>, <&aes_ick>, + <&pka_ick>, <&mmchs1_ick>, <&mmchs1_fck>, + <&mmchs2_ick>, <&mmchs2_fck>, <&gpio5_ick>, + <&gpio5_fck>, <&mdm_intc_ick>, <&mmchsdb1_fck>, + <&mmchsdb2_fck>; + }; + + mdm_clkdm: mdm_clkdm { + compatible = "ti,clockdomain"; + clocks = <&mdm_osc_ck>; + }; +}; + +&func_96m_ck { + compatible = "ti,mux-clock"; + clocks = <&apll96_ck>, <&alt_ck>; + ti,bit-shift = <4>; + reg = <0x0540>; +}; + +&dsp_div_fck { + ti,max-div = <4>; + ti,index-starts-at-one; +}; + +&ssi_ssr_sst_div_fck { + ti,max-div = <5>; + ti,index-starts-at-one; +}; diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi index 42d2c61c9e2d..c4e8013801ee 100644 --- a/arch/arm/boot/dts/omap2430.dtsi +++ b/arch/arm/boot/dts/omap2430.dtsi @@ -14,6 +14,32 @@ compatible = "ti,omap2430", "ti,omap2"; ocp { + prcm: prcm@49006000 { + compatible = "ti,omap2-prcm"; + reg = <0x49006000 0x1000>; + + prcm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + prcm_clockdomains: clockdomains { + }; + }; + + scrm: scrm@49002000 { + compatible = "ti,omap2-scrm"; + reg = <0x49002000 0x1000>; + + scrm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + scrm_clockdomains: clockdomains { + }; + }; + counter32k: counter@49020000 { compatible = "ti,omap-counter32k"; reg = <0x49020000 0x20>; diff --git a/arch/arm/boot/dts/omap24xx-clocks.dtsi b/arch/arm/boot/dts/omap24xx-clocks.dtsi new file mode 100644 index 000000000000..a1365ca926eb --- /dev/null +++ b/arch/arm/boot/dts/omap24xx-clocks.dtsi @@ -0,0 +1,1244 @@ +/* + * Device Tree Source for OMAP24xx clock data + * + * Copyright (C) 2014 Texas Instruments, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +&scrm_clocks { + mcbsp1_mux_fck: mcbsp1_mux_fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clocks = <&func_96m_ck>, <&mcbsp_clks>; + ti,bit-shift = <2>; + reg = <0x0274>; + }; + + mcbsp1_fck: mcbsp1_fck { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&mcbsp1_gate_fck>, <&mcbsp1_mux_fck>; + }; + + mcbsp2_mux_fck: mcbsp2_mux_fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clocks = <&func_96m_ck>, <&mcbsp_clks>; + ti,bit-shift = <6>; + reg = <0x0274>; + }; + + mcbsp2_fck: mcbsp2_fck { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&mcbsp2_gate_fck>, <&mcbsp2_mux_fck>; + }; +}; + +&prcm_clocks { + func_32k_ck: func_32k_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + }; + + secure_32k_ck: secure_32k_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + }; + + virt_12m_ck: virt_12m_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <12000000>; + }; + + virt_13m_ck: virt_13m_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <13000000>; + }; + + virt_19200000_ck: virt_19200000_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <19200000>; + }; + + virt_26m_ck: virt_26m_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <26000000>; + }; + + aplls_clkin_ck: aplls_clkin_ck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&virt_19200000_ck>, <&virt_26m_ck>, <&virt_13m_ck>, <&virt_12m_ck>; + ti,bit-shift = <23>; + reg = <0x0540>; + }; + + aplls_clkin_x2_ck: aplls_clkin_x2_ck { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&aplls_clkin_ck>; + clock-mult = <2>; + clock-div = <1>; + }; + + osc_ck: osc_ck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&aplls_clkin_ck>, <&aplls_clkin_x2_ck>; + ti,bit-shift = <6>; + reg = <0x0060>; + ti,index-starts-at-one; + }; + + sys_ck: sys_ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&osc_ck>; + ti,bit-shift = <6>; + ti,max-div = <3>; + reg = <0x0060>; + ti,index-starts-at-one; + }; + + alt_ck: alt_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <54000000>; + }; + + mcbsp_clks: mcbsp_clks { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0x0>; + }; + + dpll_ck: dpll_ck { + #clock-cells = <0>; + compatible = "ti,omap2-dpll-core-clock"; + clocks = <&sys_ck>, <&sys_ck>; + reg = <0x0500>, <0x0540>; + }; + + apll96_ck: apll96_ck { + #clock-cells = <0>; + compatible = "ti,omap2-apll-clock"; + clocks = <&sys_ck>; + ti,bit-shift = <2>; + ti,idlest-shift = <8>; + ti,clock-frequency = <96000000>; + reg = <0x0500>, <0x0530>, <0x0520>; + }; + + apll54_ck: apll54_ck { + #clock-cells = <0>; + compatible = "ti,omap2-apll-clock"; + clocks = <&sys_ck>; + ti,bit-shift = <6>; + ti,idlest-shift = <9>; + ti,clock-frequency = <54000000>; + reg = <0x0500>, <0x0530>, <0x0520>; + }; + + func_54m_ck: func_54m_ck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&apll54_ck>, <&alt_ck>; + ti,bit-shift = <5>; + reg = <0x0540>; + }; + + core_ck: core_ck { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&dpll_ck>; + clock-mult = <1>; + clock-div = <1>; + }; + + func_96m_ck: func_96m_ck { + #clock-cells = <0>; + }; + + apll96_d2_ck: apll96_d2_ck { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&apll96_ck>; + clock-mult = <1>; + clock-div = <2>; + }; + + func_48m_ck: func_48m_ck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&apll96_d2_ck>, <&alt_ck>; + ti,bit-shift = <3>; + reg = <0x0540>; + }; + + func_12m_ck: func_12m_ck { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&func_48m_ck>; + clock-mult = <1>; + clock-div = <4>; + }; + + sys_clkout_src_gate: sys_clkout_src_gate { + #clock-cells = <0>; + compatible = "ti,composite-no-wait-gate-clock"; + clocks = <&core_ck>; + ti,bit-shift = <7>; + reg = <0x0070>; + }; + + sys_clkout_src_mux: sys_clkout_src_mux { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clocks = <&core_ck>, <&sys_ck>, <&func_96m_ck>, <&func_54m_ck>; + reg = <0x0070>; + }; + + sys_clkout_src: sys_clkout_src { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&sys_clkout_src_gate>, <&sys_clkout_src_mux>; + }; + + sys_clkout: sys_clkout { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&sys_clkout_src>; + ti,bit-shift = <3>; + ti,max-div = <64>; + reg = <0x0070>; + ti,index-power-of-two; + }; + + emul_ck: emul_ck { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&func_54m_ck>; + ti,bit-shift = <0>; + reg = <0x0078>; + }; + + mpu_ck: mpu_ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&core_ck>; + ti,max-div = <31>; + reg = <0x0140>; + ti,index-starts-at-one; + }; + + dsp_gate_fck: dsp_gate_fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clocks = <&core_ck>; + ti,bit-shift = <0>; + reg = <0x0800>; + }; + + dsp_div_fck: dsp_div_fck { + #clock-cells = <0>; + compatible = "ti,composite-divider-clock"; + clocks = <&core_ck>; + reg = <0x0840>; + }; + + dsp_fck: dsp_fck { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&dsp_gate_fck>, <&dsp_div_fck>; + }; + + core_l3_ck: core_l3_ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&core_ck>; + ti,max-div = <31>; + reg = <0x0240>; + ti,index-starts-at-one; + }; + + gfx_3d_gate_fck: gfx_3d_gate_fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clocks = <&core_l3_ck>; + ti,bit-shift = <2>; + reg = <0x0300>; + }; + + gfx_3d_div_fck: gfx_3d_div_fck { + #clock-cells = <0>; + compatible = "ti,composite-divider-clock"; + clocks = <&core_l3_ck>; + ti,max-div = <4>; + reg = <0x0340>; + ti,index-starts-at-one; + }; + + gfx_3d_fck: gfx_3d_fck { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&gfx_3d_gate_fck>, <&gfx_3d_div_fck>; + }; + + gfx_2d_gate_fck: gfx_2d_gate_fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clocks = <&core_l3_ck>; + ti,bit-shift = <1>; + reg = <0x0300>; + }; + + gfx_2d_div_fck: gfx_2d_div_fck { + #clock-cells = <0>; + compatible = "ti,composite-divider-clock"; + clocks = <&core_l3_ck>; + ti,max-div = <4>; + reg = <0x0340>; + ti,index-starts-at-one; + }; + + gfx_2d_fck: gfx_2d_fck { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&gfx_2d_gate_fck>, <&gfx_2d_div_fck>; + }; + + gfx_ick: gfx_ick { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clocks = <&core_l3_ck>; + ti,bit-shift = <0>; + reg = <0x0310>; + }; + + l4_ck: l4_ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&core_l3_ck>; + ti,bit-shift = <5>; + ti,max-div = <3>; + reg = <0x0240>; + ti,index-starts-at-one; + }; + + dss_ick: dss_ick { + #clock-cells = <0>; + compatible = "ti,omap3-no-wait-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <0>; + reg = <0x0210>; + }; + + dss1_gate_fck: dss1_gate_fck { + #clock-cells = <0>; + compatible = "ti,composite-no-wait-gate-clock"; + clocks = <&core_ck>; + ti,bit-shift = <0>; + reg = <0x0200>; + }; + + core_d2_ck: core_d2_ck { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&core_ck>; + clock-mult = <1>; + clock-div = <2>; + }; + + core_d3_ck: core_d3_ck { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&core_ck>; + clock-mult = <1>; + clock-div = <3>; + }; + + core_d4_ck: core_d4_ck { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&core_ck>; + clock-mult = <1>; + clock-div = <4>; + }; + + core_d5_ck: core_d5_ck { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&core_ck>; + clock-mult = <1>; + clock-div = <5>; + }; + + core_d6_ck: core_d6_ck { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&core_ck>; + clock-mult = <1>; + clock-div = <6>; + }; + + dummy_ck: dummy_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + }; + + core_d8_ck: core_d8_ck { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&core_ck>; + clock-mult = <1>; + clock-div = <8>; + }; + + core_d9_ck: core_d9_ck { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&core_ck>; + clock-mult = <1>; + clock-div = <9>; + }; + + core_d12_ck: core_d12_ck { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&core_ck>; + clock-mult = <1>; + clock-div = <12>; + }; + + core_d16_ck: core_d16_ck { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&core_ck>; + clock-mult = <1>; + clock-div = <16>; + }; + + dss1_mux_fck: dss1_mux_fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clocks = <&sys_ck>, <&core_ck>, <&core_d2_ck>, <&core_d3_ck>, <&core_d4_ck>, <&core_d5_ck>, <&core_d6_ck>, <&core_d8_ck>, <&core_d9_ck>, <&core_d12_ck>, <&core_d16_ck>; + ti,bit-shift = <8>; + reg = <0x0240>; + }; + + dss1_fck: dss1_fck { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&dss1_gate_fck>, <&dss1_mux_fck>; + }; + + dss2_gate_fck: dss2_gate_fck { + #clock-cells = <0>; + compatible = "ti,composite-no-wait-gate-clock"; + clocks = <&func_48m_ck>; + ti,bit-shift = <1>; + reg = <0x0200>; + }; + + dss2_mux_fck: dss2_mux_fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clocks = <&sys_ck>, <&func_48m_ck>; + ti,bit-shift = <13>; + reg = <0x0240>; + }; + + dss2_fck: dss2_fck { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&dss2_gate_fck>, <&dss2_mux_fck>; + }; + + dss_54m_fck: dss_54m_fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clocks = <&func_54m_ck>; + ti,bit-shift = <2>; + reg = <0x0200>; + }; + + ssi_ssr_sst_gate_fck: ssi_ssr_sst_gate_fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clocks = <&core_ck>; + ti,bit-shift = <1>; + reg = <0x0204>; + }; + + ssi_ssr_sst_div_fck: ssi_ssr_sst_div_fck { + #clock-cells = <0>; + compatible = "ti,composite-divider-clock"; + clocks = <&core_ck>; + ti,bit-shift = <20>; + reg = <0x0240>; + }; + + ssi_ssr_sst_fck: ssi_ssr_sst_fck { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&ssi_ssr_sst_gate_fck>, <&ssi_ssr_sst_div_fck>; + }; + + usb_l4_gate_ick: usb_l4_gate_ick { + #clock-cells = <0>; + compatible = "ti,composite-interface-clock"; + clocks = <&core_l3_ck>; + ti,bit-shift = <0>; + reg = <0x0214>; + }; + + usb_l4_div_ick: usb_l4_div_ick { + #clock-cells = <0>; + compatible = "ti,composite-divider-clock"; + clocks = <&core_l3_ck>; + ti,bit-shift = <25>; + reg = <0x0240>; + ti,dividers = <0>, <1>, <2>, <0>, <4>; + }; + + usb_l4_ick: usb_l4_ick { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&usb_l4_gate_ick>, <&usb_l4_div_ick>; + }; + + ssi_l4_ick: ssi_l4_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <1>; + reg = <0x0214>; + }; + + gpt1_ick: gpt1_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&sys_ck>; + ti,bit-shift = <0>; + reg = <0x0410>; + }; + + gpt1_gate_fck: gpt1_gate_fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clocks = <&func_32k_ck>; + ti,bit-shift = <0>; + reg = <0x0400>; + }; + + gpt1_mux_fck: gpt1_mux_fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>; + reg = <0x0440>; + }; + + gpt1_fck: gpt1_fck { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&gpt1_gate_fck>, <&gpt1_mux_fck>; + }; + + gpt2_ick: gpt2_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <4>; + reg = <0x0210>; + }; + + gpt2_gate_fck: gpt2_gate_fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clocks = <&func_32k_ck>; + ti,bit-shift = <4>; + reg = <0x0200>; + }; + + gpt2_mux_fck: gpt2_mux_fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>; + ti,bit-shift = <2>; + reg = <0x0244>; + }; + + gpt2_fck: gpt2_fck { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&gpt2_gate_fck>, <&gpt2_mux_fck>; + }; + + gpt3_ick: gpt3_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <5>; + reg = <0x0210>; + }; + + gpt3_gate_fck: gpt3_gate_fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clocks = <&func_32k_ck>; + ti,bit-shift = <5>; + reg = <0x0200>; + }; + + gpt3_mux_fck: gpt3_mux_fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>; + ti,bit-shift = <4>; + reg = <0x0244>; + }; + + gpt3_fck: gpt3_fck { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&gpt3_gate_fck>, <&gpt3_mux_fck>; + }; + + gpt4_ick: gpt4_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <6>; + reg = <0x0210>; + }; + + gpt4_gate_fck: gpt4_gate_fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clocks = <&func_32k_ck>; + ti,bit-shift = <6>; + reg = <0x0200>; + }; + + gpt4_mux_fck: gpt4_mux_fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>; + ti,bit-shift = <6>; + reg = <0x0244>; + }; + + gpt4_fck: gpt4_fck { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&gpt4_gate_fck>, <&gpt4_mux_fck>; + }; + + gpt5_ick: gpt5_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <7>; + reg = <0x0210>; + }; + + gpt5_gate_fck: gpt5_gate_fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clocks = <&func_32k_ck>; + ti,bit-shift = <7>; + reg = <0x0200>; + }; + + gpt5_mux_fck: gpt5_mux_fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>; + ti,bit-shift = <8>; + reg = <0x0244>; + }; + + gpt5_fck: gpt5_fck { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&gpt5_gate_fck>, <&gpt5_mux_fck>; + }; + + gpt6_ick: gpt6_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <8>; + reg = <0x0210>; + }; + + gpt6_gate_fck: gpt6_gate_fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clocks = <&func_32k_ck>; + ti,bit-shift = <8>; + reg = <0x0200>; + }; + + gpt6_mux_fck: gpt6_mux_fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>; + ti,bit-shift = <10>; + reg = <0x0244>; + }; + + gpt6_fck: gpt6_fck { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&gpt6_gate_fck>, <&gpt6_mux_fck>; + }; + + gpt7_ick: gpt7_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <9>; + reg = <0x0210>; + }; + + gpt7_gate_fck: gpt7_gate_fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clocks = <&func_32k_ck>; + ti,bit-shift = <9>; + reg = <0x0200>; + }; + + gpt7_mux_fck: gpt7_mux_fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>; + ti,bit-shift = <12>; + reg = <0x0244>; + }; + + gpt7_fck: gpt7_fck { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&gpt7_gate_fck>, <&gpt7_mux_fck>; + }; + + gpt8_ick: gpt8_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <10>; + reg = <0x0210>; + }; + + gpt8_gate_fck: gpt8_gate_fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clocks = <&func_32k_ck>; + ti,bit-shift = <10>; + reg = <0x0200>; + }; + + gpt8_mux_fck: gpt8_mux_fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>; + ti,bit-shift = <14>; + reg = <0x0244>; + }; + + gpt8_fck: gpt8_fck { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&gpt8_gate_fck>, <&gpt8_mux_fck>; + }; + + gpt9_ick: gpt9_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <11>; + reg = <0x0210>; + }; + + gpt9_gate_fck: gpt9_gate_fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clocks = <&func_32k_ck>; + ti,bit-shift = <11>; + reg = <0x0200>; + }; + + gpt9_mux_fck: gpt9_mux_fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>; + ti,bit-shift = <16>; + reg = <0x0244>; + }; + + gpt9_fck: gpt9_fck { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&gpt9_gate_fck>, <&gpt9_mux_fck>; + }; + + gpt10_ick: gpt10_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <12>; + reg = <0x0210>; + }; + + gpt10_gate_fck: gpt10_gate_fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clocks = <&func_32k_ck>; + ti,bit-shift = <12>; + reg = <0x0200>; + }; + + gpt10_mux_fck: gpt10_mux_fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>; + ti,bit-shift = <18>; + reg = <0x0244>; + }; + + gpt10_fck: gpt10_fck { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&gpt10_gate_fck>, <&gpt10_mux_fck>; + }; + + gpt11_ick: gpt11_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <13>; + reg = <0x0210>; + }; + + gpt11_gate_fck: gpt11_gate_fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clocks = <&func_32k_ck>; + ti,bit-shift = <13>; + reg = <0x0200>; + }; + + gpt11_mux_fck: gpt11_mux_fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>; + ti,bit-shift = <20>; + reg = <0x0244>; + }; + + gpt11_fck: gpt11_fck { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&gpt11_gate_fck>, <&gpt11_mux_fck>; + }; + + gpt12_ick: gpt12_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <14>; + reg = <0x0210>; + }; + + gpt12_gate_fck: gpt12_gate_fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clocks = <&func_32k_ck>; + ti,bit-shift = <14>; + reg = <0x0200>; + }; + + gpt12_mux_fck: gpt12_mux_fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>; + ti,bit-shift = <22>; + reg = <0x0244>; + }; + + gpt12_fck: gpt12_fck { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&gpt12_gate_fck>, <&gpt12_mux_fck>; + }; + + mcbsp1_ick: mcbsp1_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <15>; + reg = <0x0210>; + }; + + mcbsp1_gate_fck: mcbsp1_gate_fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clocks = <&mcbsp_clks>; + ti,bit-shift = <15>; + reg = <0x0200>; + }; + + mcbsp2_ick: mcbsp2_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <16>; + reg = <0x0210>; + }; + + mcbsp2_gate_fck: mcbsp2_gate_fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clocks = <&mcbsp_clks>; + ti,bit-shift = <16>; + reg = <0x0200>; + }; + + mcspi1_ick: mcspi1_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <17>; + reg = <0x0210>; + }; + + mcspi1_fck: mcspi1_fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clocks = <&func_48m_ck>; + ti,bit-shift = <17>; + reg = <0x0200>; + }; + + mcspi2_ick: mcspi2_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <18>; + reg = <0x0210>; + }; + + mcspi2_fck: mcspi2_fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clocks = <&func_48m_ck>; + ti,bit-shift = <18>; + reg = <0x0200>; + }; + + uart1_ick: uart1_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <21>; + reg = <0x0210>; + }; + + uart1_fck: uart1_fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clocks = <&func_48m_ck>; + ti,bit-shift = <21>; + reg = <0x0200>; + }; + + uart2_ick: uart2_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <22>; + reg = <0x0210>; + }; + + uart2_fck: uart2_fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clocks = <&func_48m_ck>; + ti,bit-shift = <22>; + reg = <0x0200>; + }; + + uart3_ick: uart3_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <2>; + reg = <0x0214>; + }; + + uart3_fck: uart3_fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clocks = <&func_48m_ck>; + ti,bit-shift = <2>; + reg = <0x0204>; + }; + + gpios_ick: gpios_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&sys_ck>; + ti,bit-shift = <2>; + reg = <0x0410>; + }; + + gpios_fck: gpios_fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clocks = <&func_32k_ck>; + ti,bit-shift = <2>; + reg = <0x0400>; + }; + + mpu_wdt_ick: mpu_wdt_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&sys_ck>; + ti,bit-shift = <3>; + reg = <0x0410>; + }; + + mpu_wdt_fck: mpu_wdt_fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clocks = <&func_32k_ck>; + ti,bit-shift = <3>; + reg = <0x0400>; + }; + + sync_32k_ick: sync_32k_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&sys_ck>; + ti,bit-shift = <1>; + reg = <0x0410>; + }; + + wdt1_ick: wdt1_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&sys_ck>; + ti,bit-shift = <4>; + reg = <0x0410>; + }; + + omapctrl_ick: omapctrl_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&sys_ck>; + ti,bit-shift = <5>; + reg = <0x0410>; + }; + + cam_fck: cam_fck { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&func_96m_ck>; + ti,bit-shift = <31>; + reg = <0x0200>; + }; + + cam_ick: cam_ick { + #clock-cells = <0>; + compatible = "ti,omap3-no-wait-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <31>; + reg = <0x0210>; + }; + + mailboxes_ick: mailboxes_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <30>; + reg = <0x0210>; + }; + + wdt4_ick: wdt4_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <29>; + reg = <0x0210>; + }; + + wdt4_fck: wdt4_fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clocks = <&func_32k_ck>; + ti,bit-shift = <29>; + reg = <0x0200>; + }; + + mspro_ick: mspro_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <27>; + reg = <0x0210>; + }; + + mspro_fck: mspro_fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clocks = <&func_96m_ck>; + ti,bit-shift = <27>; + reg = <0x0200>; + }; + + fac_ick: fac_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <25>; + reg = <0x0210>; + }; + + fac_fck: fac_fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clocks = <&func_12m_ck>; + ti,bit-shift = <25>; + reg = <0x0200>; + }; + + hdq_ick: hdq_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <23>; + reg = <0x0210>; + }; + + hdq_fck: hdq_fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clocks = <&func_12m_ck>; + ti,bit-shift = <23>; + reg = <0x0200>; + }; + + i2c1_ick: i2c1_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <19>; + reg = <0x0210>; + }; + + i2c2_ick: i2c2_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <20>; + reg = <0x0210>; + }; + + gpmc_fck: gpmc_fck { + #clock-cells = <0>; + compatible = "ti,fixed-factor-clock"; + clocks = <&core_l3_ck>; + ti,clock-div = <1>; + ti,autoidle-shift = <1>; + reg = <0x0238>; + ti,clock-mult = <1>; + }; + + sdma_fck: sdma_fck { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&core_l3_ck>; + clock-mult = <1>; + clock-div = <1>; + }; + + sdma_ick: sdma_ick { + #clock-cells = <0>; + compatible = "ti,fixed-factor-clock"; + clocks = <&core_l3_ck>; + ti,clock-div = <1>; + ti,autoidle-shift = <0>; + reg = <0x0238>; + ti,clock-mult = <1>; + }; + + sdrc_ick: sdrc_ick { + #clock-cells = <0>; + compatible = "ti,fixed-factor-clock"; + clocks = <&core_l3_ck>; + ti,clock-div = <1>; + ti,autoidle-shift = <2>; + reg = <0x0238>; + ti,clock-mult = <1>; + }; + + des_ick: des_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <0>; + reg = <0x021c>; + }; + + sha_ick: sha_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <1>; + reg = <0x021c>; + }; + + rng_ick: rng_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <2>; + reg = <0x021c>; + }; + + aes_ick: aes_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <3>; + reg = <0x021c>; + }; + + pka_ick: pka_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <4>; + reg = <0x021c>; + }; + + usb_fck: usb_fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clocks = <&func_48m_ck>; + ti,bit-shift = <0>; + reg = <0x0204>; + }; +}; diff --git a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi index cc1dce6978f5..d97308896f0c 100644 --- a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi +++ b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi @@ -176,9 +176,6 @@ &omap3_pmx_core2 { pinctrl-names = "default"; - pinctrl-0 = < - &hsusb1_2_pins - >; hsusb1_2_pins: pinmux_hsusb1_2_pins { pinctrl-single,pins = < @@ -357,6 +354,10 @@ power = <50>; }; +&mcbsp2 { + status = "okay"; +}; + &gpmc { ranges = <0 0 0x30000000 0x1000000>, <7 0 0x15000000 0x01000000>; diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index 150ca097c02d..059a8ff1e6ac 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -10,6 +10,7 @@ /dts-v1/; #include "omap34xx-hs.dtsi" +#include <dt-bindings/input/input.h> / { model = "Nokia N900"; @@ -101,6 +102,19 @@ }; }; }; + + sound: n900-audio { + compatible = "nokia,n900-audio"; + + nokia,cpu-dai = <&mcbsp2>; + nokia,audio-codec = <&tlv320aic3x>, <&tlv320aic3x_aux>; + nokia,headphone-amplifier = <&tpa6130a2>; + + tvout-selection-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>; /* 40 */ + jack-detection-gpios = <&gpio6 17 GPIO_ACTIVE_HIGH>; /* 177 */ + eci-switch-gpios = <&gpio6 22 GPIO_ACTIVE_HIGH>; /* 182 */ + speaker-amplifier-gpios = <&twl_gpio 7 GPIO_ACTIVE_HIGH>; + }; }; &omap3_pmx_core { @@ -147,6 +161,15 @@ >; }; + mcspi4_pins: pinmux_mcspi4_pins { + pinctrl-single,pins = < + 0x15c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_clk */ + 0x162 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_somi */ + 0x160 (PIN_OUTPUT | MUX_MODE1) /* mcspi4_simo */ + 0x166 (PIN_OUTPUT | MUX_MODE1) /* mcspi4_cs0 */ + >; + }; + mmc1_pins: pinmux_mmc1_pins { pinctrl-single,pins = < 0x114 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk */ @@ -190,6 +213,37 @@ 0x0da (PIN_OUTPUT | MUX_MODE1) /* dss_data23.sdi_clkn */ >; }; + + wl1251_pins: pinmux_wl1251 { + pinctrl-single,pins = < + 0x0ce (PIN_OUTPUT | MUX_MODE4) /* gpio 87 => wl1251 enable */ + 0x05a (PIN_INPUT | MUX_MODE4) /* gpio 42 => wl1251 irq */ + >; + }; + + ssi_pins: pinmux_ssi { + pinctrl-single,pins = < + 0x150 (PIN_INPUT_PULLUP | MUX_MODE1) /* ssi1_rdy_tx */ + 0x14e (PIN_OUTPUT | MUX_MODE1) /* ssi1_flag_tx */ + 0x152 (PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* ssi1_wake_tx (cawake) */ + 0x14c (PIN_OUTPUT | MUX_MODE1) /* ssi1_dat_tx */ + 0x154 (PIN_INPUT | MUX_MODE1) /* ssi1_dat_rx */ + 0x156 (PIN_INPUT | MUX_MODE1) /* ssi1_flag_rx */ + 0x158 (PIN_OUTPUT | MUX_MODE1) /* ssi1_rdy_rx */ + 0x15a (PIN_OUTPUT | MUX_MODE1) /* ssi1_wake */ + >; + }; + + modem_pins: pinmux_modem { + pinctrl-single,pins = < + 0x0ac (PIN_OUTPUT | MUX_MODE4) /* gpio 70 => cmt_apeslpx */ + 0x0b0 (PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* gpio 72 => ape_rst_rq */ + 0x0b2 (PIN_OUTPUT | MUX_MODE4) /* gpio 73 => cmt_rst_rq */ + 0x0b4 (PIN_OUTPUT | MUX_MODE4) /* gpio 74 => cmt_en */ + 0x0b6 (PIN_OUTPUT | MUX_MODE4) /* gpio 75 => cmt_rst */ + 0x15e (PIN_OUTPUT | MUX_MODE4) /* gpio 157 => cmt_bsi */ + >; + }; }; &i2c1 { @@ -300,57 +354,57 @@ }; &twl_keypad { - linux,keymap = < 0x00000010 /* KEY_Q */ - 0x00010018 /* KEY_O */ - 0x00020019 /* KEY_P */ - 0x00030033 /* KEY_COMMA */ - 0x0004000e /* KEY_BACKSPACE */ - 0x0006001e /* KEY_A */ - 0x0007001f /* KEY_S */ - - 0x01000011 /* KEY_W */ - 0x01010020 /* KEY_D */ - 0x01020021 /* KEY_F */ - 0x01030022 /* KEY_G */ - 0x01040023 /* KEY_H */ - 0x01050024 /* KEY_J */ - 0x01060025 /* KEY_K */ - 0x01070026 /* KEY_L */ - - 0x02000012 /* KEY_E */ - 0x02010034 /* KEY_DOT */ - 0x02020067 /* KEY_UP */ - 0x0203001c /* KEY_ENTER */ - 0x0205002c /* KEY_Z */ - 0x0206002d /* KEY_X */ - 0x0207002e /* KEY_C */ - 0x02080043 /* KEY_F9 */ - - 0x03000013 /* KEY_R */ - 0x0301002f /* KEY_V */ - 0x03020030 /* KEY_B */ - 0x03030031 /* KEY_N */ - 0x03040032 /* KEY_M */ - 0x03050039 /* KEY_SPACE */ - 0x03060039 /* KEY_SPACE */ - 0x03070069 /* KEY_LEFT */ - - 0x04000014 /* KEY_T */ - 0x0401006c /* KEY_DOWN */ - 0x0402006a /* KEY_RIGHT */ - 0x0404001d /* KEY_LEFTCTRL */ - 0x04050064 /* KEY_RIGHTALT */ - 0x0406002a /* KEY_LEFTSHIFT */ - 0x04080044 /* KEY_F10 */ - - 0x05000015 /* KEY_Y */ - 0x05080057 /* KEY_F11 */ - - 0x06000016 /* KEY_U */ - - 0x07000017 /* KEY_I */ - 0x07010041 /* KEY_F7 */ - 0x07020042 /* KEY_F8 */ + linux,keymap = < MATRIX_KEY(0x00, 0x00, KEY_Q) + MATRIX_KEY(0x00, 0x01, KEY_O) + MATRIX_KEY(0x00, 0x02, KEY_P) + MATRIX_KEY(0x00, 0x03, KEY_COMMA) + MATRIX_KEY(0x00, 0x04, KEY_BACKSPACE) + MATRIX_KEY(0x00, 0x06, KEY_A) + MATRIX_KEY(0x00, 0x07, KEY_S) + + MATRIX_KEY(0x01, 0x00, KEY_W) + MATRIX_KEY(0x01, 0x01, KEY_D) + MATRIX_KEY(0x01, 0x02, KEY_F) + MATRIX_KEY(0x01, 0x03, KEY_G) + MATRIX_KEY(0x01, 0x04, KEY_H) + MATRIX_KEY(0x01, 0x05, KEY_J) + MATRIX_KEY(0x01, 0x06, KEY_K) + MATRIX_KEY(0x01, 0x07, KEY_L) + + MATRIX_KEY(0x02, 0x00, KEY_E) + MATRIX_KEY(0x02, 0x01, KEY_DOT) + MATRIX_KEY(0x02, 0x02, KEY_UP) + MATRIX_KEY(0x02, 0x03, KEY_ENTER) + MATRIX_KEY(0x02, 0x05, KEY_Z) + MATRIX_KEY(0x02, 0x06, KEY_X) + MATRIX_KEY(0x02, 0x07, KEY_C) + MATRIX_KEY(0x02, 0x08, KEY_F9) + + MATRIX_KEY(0x03, 0x00, KEY_R) + MATRIX_KEY(0x03, 0x01, KEY_V) + MATRIX_KEY(0x03, 0x02, KEY_B) + MATRIX_KEY(0x03, 0x03, KEY_N) + MATRIX_KEY(0x03, 0x04, KEY_M) + MATRIX_KEY(0x03, 0x05, KEY_SPACE) + MATRIX_KEY(0x03, 0x06, KEY_SPACE) + MATRIX_KEY(0x03, 0x07, KEY_LEFT) + + MATRIX_KEY(0x04, 0x00, KEY_T) + MATRIX_KEY(0x04, 0x01, KEY_DOWN) + MATRIX_KEY(0x04, 0x02, KEY_RIGHT) + MATRIX_KEY(0x04, 0x04, KEY_LEFTCTRL) + MATRIX_KEY(0x04, 0x05, KEY_RIGHTALT) + MATRIX_KEY(0x04, 0x06, KEY_LEFTSHIFT) + MATRIX_KEY(0x04, 0x08, KEY_F10) + + MATRIX_KEY(0x05, 0x00, KEY_Y) + MATRIX_KEY(0x05, 0x08, KEY_F11) + + MATRIX_KEY(0x06, 0x00, KEY_U) + + MATRIX_KEY(0x07, 0x00, KEY_I) + MATRIX_KEY(0x07, 0x01, KEY_F7) + MATRIX_KEY(0x07, 0x02, KEY_F8) >; }; @@ -621,6 +675,30 @@ }; }; +&mcspi4 { + pinctrl-names = "default"; + pinctrl-0 = <&mcspi4_pins>; + + wl1251@0 { + pinctrl-names = "default"; + pinctrl-0 = <&wl1251_pins>; + + vio-supply = <&vio>; + + compatible = "ti,wl1251"; + reg = <0>; + spi-max-frequency = <48000000>; + + spi-cpol; + spi-cpha; + + ti,power-gpio = <&gpio3 23 GPIO_ACTIVE_HIGH>; /* 87 */ + + interrupt-parent = <&gpio2>; + interrupts = <10 IRQ_TYPE_NONE>; /* gpio line 42 */ + }; +}; + &usb_otg_hs { interface-type = <0>; usb-phy = <&usb2_phy>; @@ -681,3 +759,48 @@ }; }; }; + +&mcbsp2 { + status = "ok"; +}; + +&ssi_port1 { + pinctrl-names = "default"; + pinctrl-0 = <&ssi_pins>; + + ti,ssi-cawake-gpio = <&gpio5 23 GPIO_ACTIVE_HIGH>; /* 151 */ + + modem: hsi-client { + compatible = "nokia,n900-modem"; + + pinctrl-names = "default"; + pinctrl-0 = <&modem_pins>; + + hsi-channel-ids = <0>, <1>, <2>, <3>; + hsi-channel-names = "mcsaab-control", + "speech-control", + "speech-data", + "mcsaab-data"; + hsi-speed-kbps = <55000>; + hsi-mode = "frame"; + hsi-flow = "synchronized"; + hsi-arb-mode = "round-robin"; + + interrupts-extended = <&gpio3 8 IRQ_TYPE_EDGE_FALLING>; /* 72 */ + + gpios = <&gpio3 6 GPIO_ACTIVE_HIGH>, /* 70 */ + <&gpio3 9 GPIO_ACTIVE_HIGH>, /* 73 */ + <&gpio3 10 GPIO_ACTIVE_HIGH>, /* 74 */ + <&gpio3 11 GPIO_ACTIVE_HIGH>, /* 75 */ + <&gpio5 29 GPIO_ACTIVE_HIGH>; /* 157 */ + gpio-names = "cmt_apeslpx", + "cmt_rst_rq", + "cmt_en", + "cmt_rst", + "cmt_bsi"; + }; +}; + +&ssi_port2 { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi b/arch/arm/boot/dts/omap3-n950-n9.dtsi index 5c26c184f2c1..70addcba37c5 100644 --- a/arch/arm/boot/dts/omap3-n950-n9.dtsi +++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi @@ -67,6 +67,20 @@ ti,pulldowns = <0x008106>; /* BIT(1) | BIT(2) | BIT(8) | BIT(15) */ }; +/* CSI-2 receiver */ +&vaux2 { + regulator-name = "vaux2"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; +}; + +/* Cameras */ +&vaux3 { + regulator-name = "vaux3"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; +}; + &i2c2 { clock-frequency = <400000>; }; diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index 3cc092b7cce7..b2891a9a6975 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -757,6 +757,51 @@ clock-names = "fck"; }; }; + + ssi: ssi-controller@48058000 { + compatible = "ti,omap3-ssi"; + ti,hwmods = "ssi"; + + status = "disabled"; + + reg = <0x48058000 0x1000>, + <0x48059000 0x1000>; + reg-names = "sys", + "gdd"; + + interrupts = <71>; + interrupt-names = "gdd_mpu"; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + + ssi_port1: ssi-port@4805a000 { + compatible = "ti,omap3-ssi-port"; + + reg = <0x4805a000 0x800>, + <0x4805a800 0x800>; + reg-names = "tx", + "rx"; + + interrupt-parent = <&intc>; + interrupts = <67>, + <68>; + }; + + ssi_port2: ssi-port@4805b000 { + compatible = "ti,omap3-ssi-port"; + + reg = <0x4805b000 0x800>, + <0x4805b800 0x800>; + reg-names = "tx", + "rx"; + + interrupt-parent = <&intc>; + interrupts = <69>, + <70>; + }; + }; }; }; diff --git a/arch/arm/boot/dts/omap34xx.dtsi b/arch/arm/boot/dts/omap34xx.dtsi index 2e92360da1f3..3819c1e91591 100644 --- a/arch/arm/boot/dts/omap34xx.dtsi +++ b/arch/arm/boot/dts/omap34xx.dtsi @@ -40,6 +40,17 @@ }; }; +&ssi { + status = "ok"; + + clocks = <&ssi_ssr_fck>, + <&ssi_sst_fck>, + <&ssi_ick>; + clock-names = "ssi_ssr_fck", + "ssi_sst_fck", + "ssi_ick"; +}; + /include/ "omap34xx-omap36xx-clocks.dtsi" /include/ "omap36xx-omap3430es2plus-clocks.dtsi" /include/ "omap36xx-am35xx-omap3430es2plus-clocks.dtsi" diff --git a/arch/arm/boot/dts/omap36xx-clocks.dtsi b/arch/arm/boot/dts/omap36xx-clocks.dtsi index 6b5280d04a0e..200ae3a5cbbb 100644 --- a/arch/arm/boot/dts/omap36xx-clocks.dtsi +++ b/arch/arm/boot/dts/omap36xx-clocks.dtsi @@ -83,7 +83,7 @@ }; &dpll4_m5x2_mul_ck { - clock-mult = <1>; + ti,clock-mult = <1>; }; &dpll4_m6x2_mul_ck { diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi index 22cf4647087e..541704a59a5a 100644 --- a/arch/arm/boot/dts/omap36xx.dtsi +++ b/arch/arm/boot/dts/omap36xx.dtsi @@ -78,6 +78,17 @@ clock-names = "fck", "tv_dac_clk"; }; +&ssi { + status = "ok"; + + clocks = <&ssi_ssr_fck>, + <&ssi_sst_fck>, + <&ssi_ick>; + clock-names = "ssi_ssr_fck", + "ssi_sst_fck", + "ssi_ick"; +}; + /include/ "omap34xx-omap36xx-clocks.dtsi" /include/ "omap36xx-omap3430es2plus-clocks.dtsi" /include/ "omap36xx-am35xx-omap3430es2plus-clocks.dtsi" diff --git a/arch/arm/boot/dts/omap3xxx-clocks.dtsi b/arch/arm/boot/dts/omap3xxx-clocks.dtsi index 12be2b35dae9..e47ff69dcf70 100644 --- a/arch/arm/boot/dts/omap3xxx-clocks.dtsi +++ b/arch/arm/boot/dts/omap3xxx-clocks.dtsi @@ -453,10 +453,11 @@ dpll4_m5x2_mul_ck: dpll4_m5x2_mul_ck { #clock-cells = <0>; - compatible = "fixed-factor-clock"; + compatible = "ti,fixed-factor-clock"; clocks = <&dpll4_m5_ck>; - clock-mult = <2>; - clock-div = <1>; + ti,clock-mult = <2>; + ti,clock-div = <1>; + ti,set-rate-parent; }; dpll4_m5x2_ck: dpll4_m5x2_ck { diff --git a/arch/arm/boot/dts/omap4-duovero-parlor.dts b/arch/arm/boot/dts/omap4-duovero-parlor.dts index 96f51d870812..cd53a64d8f2e 100644 --- a/arch/arm/boot/dts/omap4-duovero-parlor.dts +++ b/arch/arm/boot/dts/omap4-duovero-parlor.dts @@ -46,35 +46,35 @@ led_pins: pinmux_led_pins { pinctrl-single,pins = < - 0xd6 (PIN_OUTPUT | MUX_MODE3) /* abe_dmic_din3.gpio_122 */ + OMAP4_IOPAD(0x116, PIN_OUTPUT | MUX_MODE3) /* abe_dmic_din3.gpio_122 */ >; }; button_pins: pinmux_button_pins { pinctrl-single,pins = < - 0xd4 (PIN_INPUT_PULLUP | MUX_MODE3) /* abe_dmic_din2.gpio_121 */ + OMAP4_IOPAD(0x114, PIN_INPUT_PULLUP | MUX_MODE3) /* abe_dmic_din2.gpio_121 */ >; }; i2c2_pins: pinmux_i2c2_pins { pinctrl-single,pins = < - 0xe6 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_scl */ - 0xe8 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_sda */ + OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_scl */ + OMAP4_IOPAD(0x128, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_sda */ >; }; i2c3_pins: pinmux_i2c3_pins { pinctrl-single,pins = < - 0xea (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */ - 0xec (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */ + OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */ + OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */ >; }; smsc_pins: pinmux_smsc_pins { pinctrl-single,pins = < - 0x28 (PIN_INPUT | MUX_MODE3) /* gpmc_a20.gpio_44: IRQ */ - 0x2a (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a21.gpio_45: nReset */ - 0x30 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a24.gpio_48: amdix enabled */ + OMAP4_IOPAD(0x068, PIN_INPUT | MUX_MODE3) /* gpmc_a20.gpio_44: IRQ */ + OMAP4_IOPAD(0x06a, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a21.gpio_45: nReset */ + OMAP4_IOPAD(0x070, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a24.gpio_48: amdix enabled */ >; }; }; diff --git a/arch/arm/boot/dts/omap4-duovero.dtsi b/arch/arm/boot/dts/omap4-duovero.dtsi index a514791154eb..e860ccd9d09c 100644 --- a/arch/arm/boot/dts/omap4-duovero.dtsi +++ b/arch/arm/boot/dts/omap4-duovero.dtsi @@ -67,100 +67,98 @@ pinctrl-names = "default"; pinctrl-0 = < &twl6040_pins - &mcpdm_pins - &mcbsp1_pins &hsusbb1_pins >; twl6040_pins: pinmux_twl6040_pins { pinctrl-single,pins = < - 0x126 (PIN_OUTPUT | MUX_MODE3) /* usbb2_ulpitll_nxt.gpio_160 */ - 0x160 (PIN_INPUT | MUX_MODE0) /* sys_nirq2.sys_nirq2 */ + OMAP4_IOPAD(0x166, PIN_OUTPUT | MUX_MODE3) /* usbb2_ulpitll_nxt.gpio_160 */ + OMAP4_IOPAD(0x1a0, PIN_INPUT | MUX_MODE0) /* sys_nirq2.sys_nirq2 */ >; }; mcpdm_pins: pinmux_mcpdm_pins { pinctrl-single,pins = < - 0xc6 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_ul_data.abe_pdm_ul_data */ - 0xc8 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_dl_data.abe_pdm_dl_data */ - 0xca (PIN_INPUT_PULLUP | MUX_MODE0) /* abe_pdm_frame.abe_pdm_frame */ - 0xcc (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_lb_clk.abe_pdm_lb_clk */ - 0xce (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_clks.abe_clks */ + OMAP4_IOPAD(0x106, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_ul_data.abe_pdm_ul_data */ + OMAP4_IOPAD(0x108, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_dl_data.abe_pdm_dl_data */ + OMAP4_IOPAD(0x10a, PIN_INPUT_PULLUP | MUX_MODE0) /* abe_pdm_frame.abe_pdm_frame */ + OMAP4_IOPAD(0x10c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_lb_clk.abe_pdm_lb_clk */ + OMAP4_IOPAD(0x10e, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_clks.abe_clks */ >; }; mcbsp1_pins: pinmux_mcbsp1_pins { pinctrl-single,pins = < - 0xbe (PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_clkx.abe_mcbsp1_clkx */ - 0xc0 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dr.abe_mcbsp1_dr */ - 0xc2 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dx.abe_mcbsp1_dx */ - 0xc4 (PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_fsx.abe_mcbsp1_fsx */ + OMAP4_IOPAD(0x0fe, PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_clkx.abe_mcbsp1_clkx */ + OMAP4_IOPAD(0x100, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dr.abe_mcbsp1_dr */ + OMAP4_IOPAD(0x102, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dx.abe_mcbsp1_dx */ + OMAP4_IOPAD(0x104, PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_fsx.abe_mcbsp1_fsx */ >; }; hsusbb1_pins: pinmux_hsusbb1_pins { pinctrl-single,pins = < - 0x82 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_clk.usbb1_ulpiphy_clk */ - 0x84 (PIN_OUTPUT | MUX_MODE4) /* usbb1_ulpitll_stp.usbb1_ulpiphy_stp */ - 0x86 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dir.usbb1_ulpiphy_dir */ - 0x88 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_nxt.usbb1_ulpiphy_nxt */ - 0x8a (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat0.usbb1_ulpiphy_dat0 */ - 0x8c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat1.usbb1_ulpiphy_dat1 */ - 0x8e (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat2.usbb1_ulpiphy_dat2 */ - 0x90 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat3.usbb1_ulpiphy_dat3 */ - 0x92 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat4.usbb1_ulpiphy_dat4 */ - 0x94 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat5.usbb1_ulpiphy_dat5 */ - 0x96 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat6.usbb1_ulpiphy_dat6 */ - 0x98 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat7.usbb1_ulpiphy_dat7 */ + OMAP4_IOPAD(0x0c2, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_clk.usbb1_ulpiphy_clk */ + OMAP4_IOPAD(0x0c4, PIN_OUTPUT | MUX_MODE4) /* usbb1_ulpitll_stp.usbb1_ulpiphy_stp */ + OMAP4_IOPAD(0x0c6, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dir.usbb1_ulpiphy_dir */ + OMAP4_IOPAD(0x0c8, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_nxt.usbb1_ulpiphy_nxt */ + OMAP4_IOPAD(0x0ca, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat0.usbb1_ulpiphy_dat0 */ + OMAP4_IOPAD(0x0cc, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat1.usbb1_ulpiphy_dat1 */ + OMAP4_IOPAD(0x0ce, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat2.usbb1_ulpiphy_dat2 */ + OMAP4_IOPAD(0x0d0, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat3.usbb1_ulpiphy_dat3 */ + OMAP4_IOPAD(0x0d2, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat4.usbb1_ulpiphy_dat4 */ + OMAP4_IOPAD(0x0d4, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat5.usbb1_ulpiphy_dat5 */ + OMAP4_IOPAD(0x0d6, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat6.usbb1_ulpiphy_dat6 */ + OMAP4_IOPAD(0x0d8, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat7.usbb1_ulpiphy_dat7 */ >; }; hsusb1phy_pins: pinmux_hsusb1phy_pins { pinctrl-single,pins = < - 0x4c (PIN_OUTPUT | MUX_MODE3) /* gpmc_wait1.gpio_62 */ + OMAP4_IOPAD(0x08c, PIN_OUTPUT | MUX_MODE3) /* gpmc_wait1.gpio_62 */ >; }; w2cbw0015_pins: pinmux_w2cbw0015_pins { pinctrl-single,pins = < - 0x26 (PIN_OUTPUT | MUX_MODE3) /* gpmc_a19.gpio_43 */ - 0x3a (PIN_INPUT | MUX_MODE3) /* gpmc_ncs3.gpio_53 */ + OMAP4_IOPAD(0x066, PIN_OUTPUT | MUX_MODE3) /* gpmc_a19.gpio_43 */ + OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3) /* gpmc_ncs3.gpio_53 */ >; }; i2c1_pins: pinmux_i2c1_pins { pinctrl-single,pins = < - 0xe2 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */ - 0xe4 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */ + OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */ + OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */ >; }; i2c4_pins: pinmux_i2c4_pins { pinctrl-single,pins = < - 0xee (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_scl */ - 0xf0 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */ + OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_scl */ + OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */ >; }; mmc1_pins: pinmux_mmc1_pins { pinctrl-single,pins = < - 0xa2 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk */ - 0xa4 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmcc1_cmd */ - 0xa6 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmcc1_dat0 */ - 0xa8 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1 */ - 0xaa (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2 */ - 0xac (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3 */ + OMAP4_IOPAD(0x0e2, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk */ + OMAP4_IOPAD(0x0e4, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmcc1_cmd */ + OMAP4_IOPAD(0x0e6, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmcc1_dat0 */ + OMAP4_IOPAD(0x0e8, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1 */ + OMAP4_IOPAD(0x0ea, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2 */ + OMAP4_IOPAD(0x0ec, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3 */ >; }; mmc5_pins: pinmux_mmc5_pins { pinctrl-single,pins = < - 0x108 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_clk */ - 0x10a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmcc5_cmd */ - 0x10c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmcc5_dat0 */ - 0x10e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat1 */ - 0x110 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat2 */ - 0x112 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat3 */ + OMAP4_IOPAD(0x148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_clk */ + OMAP4_IOPAD(0x14a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmcc5_cmd */ + OMAP4_IOPAD(0x14c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmcc5_dat0 */ + OMAP4_IOPAD(0x14e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat1 */ + OMAP4_IOPAD(0x150, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat2 */ + OMAP4_IOPAD(0x152, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat3 */ >; }; }; @@ -202,6 +200,18 @@ clock-frequency = <400000>; }; +&mcbsp1 { + pinctrl-names = "default"; + pinctrl-0 = <&mcbsp1_pins>; + status = "okay"; +}; + +&mcpdm { + pinctrl-names = "default"; + pinctrl-0 = <&mcpdm_pins>; + status = "okay"; +}; + &mmc1 { pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins>; diff --git a/arch/arm/boot/dts/omap4-var-dvk-om44.dts b/arch/arm/boot/dts/omap4-var-dvk-om44.dts new file mode 100644 index 000000000000..458d79fa378b --- /dev/null +++ b/arch/arm/boot/dts/omap4-var-dvk-om44.dts @@ -0,0 +1,71 @@ +/* + * Copyright (C) 2014 Joachim Eastwood <manabian@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "omap4-var-som-om44.dtsi" +#include "omap4-var-som-om44-wlan.dtsi" +#include "omap4-var-om44customboard.dtsi" + +/ { + model = "Variscite VAR-DVK-OM44"; + compatible = "variscite,var-dvk-om44", "variscite,var-som-om44", "ti,omap4460", "ti,omap4"; + + aliases { + display0 = &lcd0; + display1 = &hdmi0; + }; + + lcd0: display { + compatible = "innolux,at070tn83", "panel-dpi"; + label = "lcd"; + panel-timing { + clock-frequency = <33333333>; + + hback-porch = <40>; + hactive = <800>; + hfront-porch = <40>; + hsync-len = <48>; + + vback-porch = <29>; + vactive = <480>; + vfront-porch = <13>; + vsync-len = <3>; + }; + + port { + lcd_in: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + }; + + backlight { + compatible = "gpio-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&backlight_pins>; + + gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>; /* gpio 122 */ + }; +}; + +&dss { + pinctrl-names = "default"; + pinctrl-0 = <&dss_dpi_pins>; + + port { + dpi_out: endpoint { + remote-endpoint = <&lcd_in>; + data-lines = <24>; + }; + }; +}; + +&dsi2 { + status = "okay"; + vdd-supply = <&vcxio>; +}; diff --git a/arch/arm/boot/dts/omap4-var-om44customboard.dtsi b/arch/arm/boot/dts/omap4-var-om44customboard.dtsi new file mode 100644 index 000000000000..f2d2fdb75628 --- /dev/null +++ b/arch/arm/boot/dts/omap4-var-om44customboard.dtsi @@ -0,0 +1,235 @@ +/* + * Copyright (C) 2014 Joachim Eastwood <manabian@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <dt-bindings/input/input.h> + +/ { + aliases { + display0 = &hdmi0; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_led_pins>; + + led0 { + label = "var:green:led0"; + gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>; /* gpio 173 */ + linux,default-trigger = "heartbeat"; + }; + + led1 { + label = "var:green:led1"; + gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>; /* gpio 172 */ + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_key_pins>; + #address-cells = <1>; + #size-cells = <0>; + + user-key@184 { + label = "user"; + gpios = <&gpio6 24 GPIO_ACTIVE_HIGH>; /* gpio 184 */ + linux,code = <BTN_EXTRA>; + gpio-key,wakeup; + }; + }; + + hdmi0: connector@0 { + compatible = "hdmi-connector"; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_hpd_pins>; + label = "hdmi"; + type = "a"; + + hpd-gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>; /* gpio_63 */ + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_out>; + }; + }; + }; +}; + +&omap4_pmx_core { + uart1_pins: pinmux_uart1_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x13c, PIN_INPUT_PULLUP | MUX_MODE1) /* mcspi1_cs2.uart1_cts */ + OMAP4_IOPAD(0x13e, PIN_OUTPUT | MUX_MODE1) /* mcspi1_cs3.uart1_rts */ + OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP | MUX_MODE1) /* i2c2_scl.uart1_rx */ + OMAP4_IOPAD(0x128, PIN_OUTPUT | MUX_MODE1) /* i2c2_sda.uart1_tx */ + >; + }; + + mcspi1_pins: pinmux_mcspi1_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x132, PIN_INPUT | MUX_MODE0) /* mcspi1_clk.mcspi1_clk */ + OMAP4_IOPAD(0x134, PIN_INPUT | MUX_MODE0) /* mcspi1_somi.mcspi1_somi */ + OMAP4_IOPAD(0x136, PIN_INPUT | MUX_MODE0) /* mcspi1_simo.mcspi1_simo */ + OMAP4_IOPAD(0x138, PIN_INPUT | MUX_MODE0) /* mcspi1_cs0.mcspi1_cs0 */ + >; + }; + + mcasp_pins: pinmux_mcsasp_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x0f8, PIN_OUTPUT | MUX_MODE2) /* mcbsp2_dr.abe_mcasp_axr */ + >; + }; + + dss_dpi_pins: pinmux_dss_dpi_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x162, PIN_OUTPUT | MUX_MODE5) /* dispc2_data23 */ + OMAP4_IOPAD(0x164, PIN_OUTPUT | MUX_MODE5) /* dispc2_data22 */ + OMAP4_IOPAD(0x166, PIN_OUTPUT | MUX_MODE5) /* dispc2_data21 */ + OMAP4_IOPAD(0x168, PIN_OUTPUT | MUX_MODE5) /* dispc2_data20 */ + OMAP4_IOPAD(0x16a, PIN_OUTPUT | MUX_MODE5) /* dispc2_data19 */ + OMAP4_IOPAD(0x16c, PIN_OUTPUT | MUX_MODE5) /* dispc2_data18 */ + OMAP4_IOPAD(0x16e, PIN_OUTPUT | MUX_MODE5) /* dispc2_data15 */ + OMAP4_IOPAD(0x170, PIN_OUTPUT | MUX_MODE5) /* dispc2_data14 */ + OMAP4_IOPAD(0x172, PIN_OUTPUT | MUX_MODE5) /* dispc2_data13 */ + OMAP4_IOPAD(0x174, PIN_OUTPUT | MUX_MODE5) /* dispc2_data12 */ + OMAP4_IOPAD(0x176, PIN_OUTPUT | MUX_MODE5) /* dispc2_data11 */ + OMAP4_IOPAD(0x1b4, PIN_OUTPUT | MUX_MODE5) /* dispc2_data10 */ + OMAP4_IOPAD(0x1b6, PIN_OUTPUT | MUX_MODE5) /* dispc2_data9 */ + OMAP4_IOPAD(0x1b8, PIN_OUTPUT | MUX_MODE5) /* dispc2_data16 */ + OMAP4_IOPAD(0x1ba, PIN_OUTPUT | MUX_MODE5) /* dispc2_data17 */ + OMAP4_IOPAD(0x1bc, PIN_OUTPUT | MUX_MODE5) /* dispc2_hsync */ + OMAP4_IOPAD(0x1be, PIN_OUTPUT | MUX_MODE5) /* dispc2_pclk */ + OMAP4_IOPAD(0x1c0, PIN_OUTPUT | MUX_MODE5) /* dispc2_vsync */ + OMAP4_IOPAD(0x1c2, PIN_OUTPUT | MUX_MODE5) /* dispc2_de */ + OMAP4_IOPAD(0x1c4, PIN_OUTPUT | MUX_MODE5) /* dispc2_data8 */ + OMAP4_IOPAD(0x1c6, PIN_OUTPUT | MUX_MODE5) /* dispc2_data7 */ + OMAP4_IOPAD(0x1c8, PIN_OUTPUT | MUX_MODE5) /* dispc2_data6 */ + OMAP4_IOPAD(0x1ca, PIN_OUTPUT | MUX_MODE5) /* dispc2_data5 */ + OMAP4_IOPAD(0x1cc, PIN_OUTPUT | MUX_MODE5) /* dispc2_data4 */ + OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE5) /* dispc2_data3 */ + OMAP4_IOPAD(0x1d0, PIN_OUTPUT | MUX_MODE5) /* dispc2_data2 */ + OMAP4_IOPAD(0x1d2, PIN_OUTPUT | MUX_MODE5) /* dispc2_data1 */ + OMAP4_IOPAD(0x1d4, PIN_OUTPUT | MUX_MODE5) /* dispc2_data0 */ + >; + }; + + dss_hdmi_pins: pinmux_dss_hdmi_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x09a, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */ + OMAP4_IOPAD(0x09c, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_scl.hdmi_scl */ + OMAP4_IOPAD(0x09e, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_sda.hdmi_sda */ + >; + }; + + i2c4_pins: pinmux_i2c4_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_scl */ + OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */ + >; + }; + + mmc5_pins: pinmux_mmc5_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x0f6, PIN_INPUT | MUX_MODE3) /* abe_mcbsp2_clkx.gpio_110 */ + OMAP4_IOPAD(0x148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_clk.sdmmc5_clk */ + OMAP4_IOPAD(0x14a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_cmd.sdmmc5_cmd */ + OMAP4_IOPAD(0x14c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat0.sdmmc5_dat0 */ + OMAP4_IOPAD(0x14e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat1.sdmmc5_dat1 */ + OMAP4_IOPAD(0x150, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat2.sdmmc5_dat2 */ + OMAP4_IOPAD(0x152, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat3.sdmmc5_dat3 */ + >; + }; + + gpio_led_pins: pinmux_gpio_led_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x17e, PIN_OUTPUT | MUX_MODE3) /* kpd_col4.gpio_172 */ + OMAP4_IOPAD(0x180, PIN_OUTPUT | MUX_MODE3) /* kpd_col5.gpio_173 */ + >; + }; + + gpio_key_pins: pinmux_gpio_key_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x1a2, PIN_INPUT | MUX_MODE3) /* sys_boot0.gpio_184 */ + >; + }; + + ks8851_irq_pins: pinmux_ks8851_irq_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x17c, PIN_INPUT_PULLUP | MUX_MODE3) /* kpd_col3.gpio_171 */ + >; + }; + + hdmi_hpd_pins: pinmux_hdmi_hpd_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x098, PIN_INPUT_PULLDOWN | MUX_MODE3) /* hdmi_hpd.gpio_63 */ + >; + }; + + backlight_pins: pinmux_backlight_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x116, PIN_OUTPUT | MUX_MODE3) /* abe_dmic_din3.gpio_122 */ + >; + }; +}; + +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_pins>; + clock-frequency = <400000>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + status = "okay"; +}; + +&mcspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&mcspi1_pins>; + status = "okay"; + + eth@0 { + compatible = "ks8851"; + pinctrl-names = "default"; + pinctrl-0 = <&ks8851_irq_pins>; + spi-max-frequency = <24000000>; + reg = <0>; + interrupt-parent = <&gpio6>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; /* gpio 171 */ + }; +}; + +&mmc5 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc5_pins>; + vmmc-supply = <&vbat>; + bus-width = <4>; + cd-gpios = <&gpio4 14 GPIO_ACTIVE_HIGH>; /* gpio 110 */ + status = "okay"; +}; + +&dss { + status = "okay"; +}; + +&hdmi { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&dss_hdmi_pins>; + vdda-supply = <&vdac>; + + port { + hdmi_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; + }; +}; diff --git a/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi b/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi new file mode 100644 index 000000000000..cc66af419236 --- /dev/null +++ b/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi @@ -0,0 +1,68 @@ +/* + * Copyright (C) 2014 Joachim Eastwood <manabian@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/ { + /* regulator for wl12xx on sdio4 */ + wl12xx_vmmc: wl12xx_vmmc { + pinctrl-names = "default"; + pinctrl-0 = <&wl12xx_ctrl_pins>; + compatible = "regulator-fixed"; + regulator-name = "vwl1271"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio2 11 0>; /* gpio 43 */ + startup-delay-us = <70000>; + enable-active-high; + }; +}; + +&omap4_pmx_core { + uart2_pins: pinmux_uart2_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x118, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts.uart2_cts */ + OMAP4_IOPAD(0x11a, PIN_OUTPUT | MUX_MODE0) /* uart2_rts.uart2_rts */ + OMAP4_IOPAD(0x11c, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_rx.uart2_rx */ + OMAP4_IOPAD(0x11e, PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */ + >; + }; + + wl12xx_ctrl_pins: pinmux_wl12xx_ctrl_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x062, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a17.gpio_41 (WLAN_IRQ) */ + OMAP4_IOPAD(0x064, PIN_OUTPUT | MUX_MODE3) /* gpmc_a18.gpio_42 (BT_EN) */ + OMAP4_IOPAD(0x066, PIN_OUTPUT | MUX_MODE3) /* gpmc_a19.gpio_43 (WLAN_EN) */ + >; + }; + + mmc4_pins: pinmux_mmc4_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x154, PIN_INPUT_PULLUP | MUX_MODE1) /* mcspi4_clk.sdmmc4_clk */ + OMAP4_IOPAD(0x156, PIN_INPUT_PULLUP | MUX_MODE1) /* mcspi4_simo.sdmmc4_cmd */ + OMAP4_IOPAD(0x158, PIN_INPUT_PULLUP | MUX_MODE1) /* mcspi4_somi.sdmmc4_dat0 */ + OMAP4_IOPAD(0x15e, PIN_INPUT_PULLUP | MUX_MODE1) /* uart4_tx.sdmmc4_dat1 */ + OMAP4_IOPAD(0x15c, PIN_INPUT_PULLUP | MUX_MODE1) /* uart4_rx.sdmmc4_dat2 */ + OMAP4_IOPAD(0x15a, PIN_INPUT_PULLUP | MUX_MODE1) /* mcspi4_cs0.sdmmc4_dat3 */ + >; + }; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + status = "okay"; +}; + +&mmc4 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc4_pins>; + vmmc-supply = <&wl12xx_vmmc>; + non-removable; + bus-width = <4>; + cap-power-off-card; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/omap4-var-som-om44.dtsi b/arch/arm/boot/dts/omap4-var-som-om44.dtsi new file mode 100644 index 000000000000..062701e1a898 --- /dev/null +++ b/arch/arm/boot/dts/omap4-var-som-om44.dtsi @@ -0,0 +1,343 @@ +/* + * Copyright (C) 2014 Joachim Eastwood <manabian@gmail.com> + * Copyright (C) 2012 Variscite Ltd. - http://www.variscite.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include "omap4460.dtsi" + +/ { + model = "Variscite VAR-SOM-OM44"; + compatible = "variscite,var-som-om44", "ti,omap4460", "ti,omap4"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x40000000>; /* 1 GB */ + }; + + sound: sound@0 { + compatible = "ti,abe-twl6040"; + ti,model = "VAR-SOM-OM44"; + + ti,mclk-freq = <38400000>; + ti,mcpdm = <&mcpdm>; + ti,twl6040 = <&twl6040>; + + /* Audio routing */ + ti,audio-routing = + "Headset Stereophone", "HSOL", + "Headset Stereophone", "HSOR", + "AFML", "Line In", + "AFMR", "Line In"; + }; + + /* HS USB Host PHY on PORT 1 */ + hsusb1_phy: hsusb1_phy { + compatible = "usb-nop-xceiv"; + pinctrl-names = "default"; + pinctrl-0 = < + &hsusbb1_phy_clk_pins + &hsusbb1_phy_rst_pins + >; + + reset-gpios = <&gpio6 17 GPIO_ACTIVE_LOW>; /* gpio 177 */ + vcc-supply = <&vbat>; + + clocks = <&auxclk3_ck>; + clock-names = "main_clk"; + clock-frequency = <19200000>; + }; + + vbat: fixedregulator-vbat { + compatible = "regulator-fixed"; + regulator-name = "VBAT"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; +}; + +&omap4_pmx_core { + pinctrl-names = "default"; + pinctrl-0 = < + &hsusbb1_pins + >; + + twl6040_pins: pinmux_twl6040_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x19c, PIN_OUTPUT | MUX_MODE3) /* fref_clk2_out.gpio_182 */ + OMAP4_IOPAD(0x1a0, PIN_INPUT | MUX_MODE0) /* sys_nirq2.sys_nirq2 */ + >; + }; + + mcpdm_pins: pinmux_mcpdm_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x106, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_ul_data.abe_pdm_ul_data */ + OMAP4_IOPAD(0x108, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_dl_data.abe_pdm_dl_data */ + OMAP4_IOPAD(0x10a, PIN_INPUT_PULLUP | MUX_MODE0) /* abe_pdm_frame.abe_pdm_frame */ + OMAP4_IOPAD(0x10c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_lb_clk.abe_pdm_lb_clk */ + OMAP4_IOPAD(0x10e, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_clks.abe_clks */ + >; + }; + + tsc2004_pins: pinmux_tsc2004_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x090, PIN_INPUT | MUX_MODE3) /* gpmc_ncs4.gpio_101 (irq) */ + OMAP4_IOPAD(0x092, PIN_OUTPUT | MUX_MODE3) /* gpmc_ncs5.gpio_102 (rst) */ + >; + }; + + uart3_pins: pinmux_uart3_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x140, PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_cts_rctx.uart3_cts_rctx */ + OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE0) /* uart3_rts_sd.uart3_rts_sd */ + OMAP4_IOPAD(0x144, PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ + OMAP4_IOPAD(0x146, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */ + >; + }; + + hsusbb1_pins: pinmux_hsusbb1_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x0c2, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_clk.usbb1_ulpiphy_clk */ + OMAP4_IOPAD(0x0c4, PIN_OUTPUT | MUX_MODE4) /* usbb1_ulpitll_stp.usbb1_ulpiphy_stp */ + OMAP4_IOPAD(0x0c6, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dir.usbb1_ulpiphy_dir */ + OMAP4_IOPAD(0x0c8, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_nxt.usbb1_ulpiphy_nxt */ + OMAP4_IOPAD(0x0ca, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat0.usbb1_ulpiphy_dat0 */ + OMAP4_IOPAD(0x0cc, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat1.usbb1_ulpiphy_dat1 */ + OMAP4_IOPAD(0x0ce, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat2.usbb1_ulpiphy_dat2 */ + OMAP4_IOPAD(0x0d0, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat3.usbb1_ulpiphy_dat3 */ + OMAP4_IOPAD(0x0d2, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat4.usbb1_ulpiphy_dat4 */ + OMAP4_IOPAD(0x0d4, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat5.usbb1_ulpiphy_dat5 */ + OMAP4_IOPAD(0x0d6, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat6.usbb1_ulpiphy_dat6 */ + OMAP4_IOPAD(0x0d8, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat7.usbb1_ulpiphy_dat7 */ + >; + }; + + hsusbb1_phy_rst_pins: pinmux_hsusbb1_phy_rst_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x18c, PIN_OUTPUT | MUX_MODE3) /* kpd_row2.gpio_177 */ + >; + }; + + i2c1_pins: pinmux_i2c1_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */ + OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */ + >; + }; + + i2c3_pins: pinmux_i2c3_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */ + OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */ + >; + }; + + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x0e2, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */ + OMAP4_IOPAD(0x0e4, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */ + OMAP4_IOPAD(0x0e6, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */ + OMAP4_IOPAD(0x0e8, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */ + OMAP4_IOPAD(0x0ea, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */ + OMAP4_IOPAD(0x0ec, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */ + >; + }; +}; + +&omap4_pmx_wkup { + pinctrl-names = "default"; + pinctrl-0 = < + &hsusbb1_hub_rst_pins + &lan7500_rst_pins + >; + + hsusbb1_phy_clk_pins: pinmux_hsusbb1_phy_clk_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x058, PIN_OUTPUT | MUX_MODE0) /* fref_clk3_out */ + >; + }; + + hsusbb1_hub_rst_pins: pinmux_hsusbb1_hub_rst_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x042, PIN_OUTPUT | MUX_MODE3) /* gpio_wk1 */ + >; + }; + + lan7500_rst_pins: pinmux_lan7500_rst_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x040, PIN_OUTPUT | MUX_MODE3) /* gpio_wk0 */ + >; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + status = "okay"; + + clock-frequency = <400000>; + + twl: twl@48 { + reg = <0x48>; + /* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */ + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */ + interrupt-parent = <&gic>; + }; + + twl6040: twl@4b { + compatible = "ti,twl6040"; + reg = <0x4b>; + + pinctrl-names = "default"; + pinctrl-0 = <&twl6040_pins>; + + /* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */ + interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */ + interrupt-parent = <&gic>; + ti,audpwron-gpio = <&gpio6 22 0>; /* gpio 182 */ + + vio-supply = <&v1v8>; + v2v1-supply = <&v2v1>; + enable-active-high; + }; +}; + +#include "twl6030.dtsi" +#include "twl6030_omap4.dtsi" + +&vusim { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; +}; + +&i2c2 { + status = "disabled"; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; + status = "okay"; + + clock-frequency = <400000>; + + touchscreen: tsc2004@48 { + compatible = "ti,tsc2004"; + reg = <0x48>; + pinctrl-names = "default"; + pinctrl-0 = <&tsc2004_pins>; + interrupt-parent = <&gpio4>; + interrupts = <5 IRQ_TYPE_LEVEL_LOW>; /* gpio 101 */ + status = "disabled"; + }; + + tmp105@49 { + compatible = "ti,tmp105"; + reg = <0x49>; + }; + + eeprom@50 { + compatible = "microchip,24c32"; + reg = <0x50>; + }; +}; + +&i2c4 { + status = "disabled"; +}; + +&mcpdm { + pinctrl-names = "default"; + pinctrl-0 = <&mcpdm_pins>; + status = "okay"; +}; + +&gpmc { + status = "disabled"; +}; + +&mcspi1 { + status = "disabled"; +}; + +&mcspi2 { + status = "disabled"; +}; + +&mcspi3 { + status = "disabled"; +}; + +&mcspi4 { + status = "disabled"; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + vmmc-supply = <&vmmc>; + bus-width = <4>; + ti,non-removable; + status = "okay"; +}; + +&mmc2 { + status = "disabled"; +}; + +&mmc3 { + status = "disabled"; +}; + +&mmc4 { + status = "disabled"; +}; + +&mmc5 { + status = "disabled"; +}; + +&uart1 { + status = "disabled"; +}; + +&uart2 { + status = "disabled"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; + status = "okay"; +}; + +&uart4 { + status = "disabled"; +}; + +&keypad { + status = "disabled"; +}; + +&twl_usb_comparator { + usb-supply = <&vusb>; +}; + +&usb_otg_hs { + interface-type = <1>; + mode = <3>; + power = <50>; +}; + +&usbhshost { + port1-mode = "ehci-phy"; +}; + +&usbhsehci { + phys = <&hsusb1_phy>; +}; diff --git a/arch/arm/boot/dts/omap4-var-som.dts b/arch/arm/boot/dts/omap4-var-som.dts deleted file mode 100644 index b41269e871dd..000000000000 --- a/arch/arm/boot/dts/omap4-var-som.dts +++ /dev/null @@ -1,96 +0,0 @@ -/* - * Copyright (C) 2012 Variscite Ltd. - http://www.variscite.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -/dts-v1/; - -#include "omap443x.dtsi" - -/ { - model = "Variscite OMAP4 SOM"; - compatible = "var,omap4-var_som", "ti,omap4430", "ti,omap4"; - - memory { - device_type = "memory"; - reg = <0x80000000 0x40000000>; /* 1 GB */ - }; - - vdd_eth: fixedregulator@0 { - compatible = "regulator-fixed"; - regulator-name = "VDD_ETH"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - enable-active-high; - regulator-boot-on; - }; -}; - -&i2c1 { - clock-frequency = <400000>; - - twl: twl@48 { - reg = <0x48>; - /* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */ - interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */ - interrupt-parent = <&gic>; - }; -}; - -#include "twl6030.dtsi" - -&i2c2 { - clock-frequency = <400000>; -}; - -&i2c3 { - clock-frequency = <400000>; - - /* - * Temperature Sensor - * http://www.ti.com/lit/ds/symlink/tmp105.pdf - */ - tmp105@49 { - compatible = "ti,tmp105"; - reg = <0x49>; - }; -}; - -&i2c4 { - clock-frequency = <400000>; -}; - -&mcspi1 { - eth@0 { - compatible = "ks8851"; - spi-max-frequency = <24000000>; - reg = <0>; - interrupt-parent = <&gpio6>; - interrupts = <11 IRQ_TYPE_LEVEL_LOW>; /* gpio line 171 */ - vdd-supply = <&vdd_eth>; - }; -}; - -&mmc1 { - vmmc-supply = <&vmmc>; - ti,bus-width = <8>; - ti,non-removable; -}; - -&mmc2 { - status = "disabled"; -}; - -&mmc3 { - status = "disabled"; -}; - -&mmc4 { - status = "disabled"; -}; - -&mmc5 { - ti,bus-width = <4>; -}; diff --git a/arch/arm/boot/dts/omap4-var-stk-om44.dts b/arch/arm/boot/dts/omap4-var-stk-om44.dts new file mode 100644 index 000000000000..56b64e618608 --- /dev/null +++ b/arch/arm/boot/dts/omap4-var-stk-om44.dts @@ -0,0 +1,17 @@ +/* + * Copyright (C) 2014 Joachim Eastwood <manabian@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "omap4-var-som-om44.dtsi" +#include "omap4-var-som-om44-wlan.dtsi" +#include "omap4-var-om44customboard.dtsi" + +/ { + model = "Variscite VAR-STK-OM44"; + compatible = "variscite,var-stk-om44", "variscite,var-som-om44", "ti,omap4460", "ti,omap4"; +}; diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index b22664544a09..43a587e097d4 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -67,6 +67,7 @@ local-timer@48240600 { compatible = "arm,cortex-a9-twd-timer"; + clocks = <&mpu_periphclk>; reg = <0x48240600 0x20>; interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_HIGH)>; }; @@ -642,6 +643,8 @@ compatible = "ti,omap-usb2"; reg = <0x4a0ad080 0x58>; ctrl-module = <&omap_control_usb2phy>; + clocks = <&usb_phy_cm_clk32k>; + clock-names = "wkupclk"; #phy-cells = <0>; }; }; diff --git a/arch/arm/boot/dts/omap5-cm-t54.dts b/arch/arm/boot/dts/omap5-cm-t54.dts new file mode 100644 index 000000000000..b8698ca68647 --- /dev/null +++ b/arch/arm/boot/dts/omap5-cm-t54.dts @@ -0,0 +1,413 @@ +/* + * Support for CompuLab CM-T54 + */ +/dts-v1/; + +#include "omap5.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + model = "CompuLab CM-T54"; + compatible = "compulab,omap5-cm-t54", "ti,omap5"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x7F000000>; /* 2048 MB */ + }; + + vmmcsd_fixed: fixed-regulator-mmcsd { + compatible = "regulator-fixed"; + regulator-name = "vmmcsd_fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vwlan_pdn_fixed: fixed-regulator-vwlan-pdn { + compatible = "regulator-fixed"; + regulator-name = "vwlan_pdn_fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&ldo2_reg>; + gpio = <&gpio4 13 GPIO_ACTIVE_HIGH>; /* gpio4_109 */ + startup-delay-us = <1000>; + enable-active-high; + }; + + vwlan_fixed: fixed-regulator-vwlan { + compatible = "regulator-fixed"; + regulator-name = "vwlan_fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vwlan_pdn_fixed>; + gpio = <&gpio4 14 GPIO_ACTIVE_HIGH>; /* gpio4_110 */ + startup-delay-us = <1000>; + enable-active-high; + }; + + /* HS USB Host PHY on PORT 2 */ + hsusb2_phy: hsusb2_phy { + compatible = "usb-nop-xceiv"; + reset-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>; /* gpio3_76 HUB_RESET */ + }; + + /* HS USB Host PHY on PORT 3 */ + hsusb3_phy: hsusb3_phy { + compatible = "usb-nop-xceiv"; + reset-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; /* gpio3_83 ETH_RESET */ + }; + + leds { + compatible = "gpio-leds"; + led@1 { + label = "Heartbeat"; + gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>; /* gpio3_80 ACT_LED */ + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + }; +}; + +&omap5_pmx_core { + pinctrl-names = "default"; + pinctrl-0 = < + &led_gpio_pins + &usbhost_pins + >; + + led_gpio_pins: pinmux_led_gpio_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x00b0, PIN_OUTPUT | MUX_MODE6) /* hsi2_caflag.gpio3_80 */ + >; + }; + + i2c1_pins: pinmux_i2c1_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x01f2, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_pmic_scl */ + OMAP5_IOPAD(0x01f4, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_pmic_sda */ + >; + }; + + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x01e2, PIN_INPUT_PULLUP | MUX_MODE0) /* sdcard_clk */ + OMAP5_IOPAD(0x01e4, PIN_INPUT_PULLUP | MUX_MODE0) /* sdcard_cmd */ + OMAP5_IOPAD(0x01e6, PIN_INPUT_PULLUP | MUX_MODE0) /* sdcard_data2 */ + OMAP5_IOPAD(0x01e8, PIN_INPUT_PULLUP | MUX_MODE0) /* sdcard_data3 */ + OMAP5_IOPAD(0x01ea, PIN_INPUT_PULLUP | MUX_MODE0) /* sdcard_data0 */ + OMAP5_IOPAD(0x01ec, PIN_INPUT_PULLUP | MUX_MODE0) /* sdcard_data1 */ + >; + }; + + mmc2_pins: pinmux_mmc2_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x0040, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_clk */ + OMAP5_IOPAD(0x0042, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_cmd */ + OMAP5_IOPAD(0x0044, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data0 */ + OMAP5_IOPAD(0x0046, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data1 */ + OMAP5_IOPAD(0x0048, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data2 */ + OMAP5_IOPAD(0x004a, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data3 */ + OMAP5_IOPAD(0x004c, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data4 */ + OMAP5_IOPAD(0x004e, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data5 */ + OMAP5_IOPAD(0x0050, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data6 */ + OMAP5_IOPAD(0x0052, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data7 */ + >; + }; + + mmc3_pins: pinmux_mmc3_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x01a4, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_clk */ + OMAP5_IOPAD(0x01a6, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_cmd */ + OMAP5_IOPAD(0x01a8, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data0 */ + OMAP5_IOPAD(0x01aa, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data1 */ + OMAP5_IOPAD(0x01ac, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data2 */ + OMAP5_IOPAD(0x01ae, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data3 */ + >; + }; + + wlan_gpios_pins: pinmux_wlan_gpios_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x019c, PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* gpio4_109 */ + OMAP5_IOPAD(0x019e, PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* gpio4_110 */ + >; + }; + + usbhost_pins: pinmux_usbhost_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x00c4, PIN_INPUT | MUX_MODE0) /* usbb2_hsic_strobe */ + OMAP5_IOPAD(0x00c6, PIN_INPUT | MUX_MODE0) /* usbb2_hsic_data */ + + OMAP5_IOPAD(0x01dc, PIN_INPUT | MUX_MODE0) /* usbb3_hsic_strobe */ + OMAP5_IOPAD(0x01de, PIN_INPUT | MUX_MODE0) /* usbb3_hsic_data */ + + OMAP5_IOPAD(0x00a8, PIN_OUTPUT | MUX_MODE6) /* hsi2_caready.gpio3_76 */ + OMAP5_IOPAD(0x00b6, PIN_OUTPUT | MUX_MODE6) /* hsi2_acdata.gpio3_83 */ + >; + }; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + vmmc-supply = <&ldo9_reg>; + bus-width = <4>; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; + vmmc-supply = <&vmmcsd_fixed>; + bus-width = <8>; + ti,non-removable; +}; + +&mmc3 { + pinctrl-names = "default"; + pinctrl-0 = < + &mmc3_pins + &wlan_gpios_pins + >; + vmmc-supply = <&vwlan_fixed>; + bus-width = <4>; + ti,non-removable; +}; + +&mmc4 { + status = "disabled"; +}; + +&mmc5 { + status = "disabled"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + + clock-frequency = <400000>; + + at24@50 { + compatible = "at24,24c02"; + pagesize = <16>; + reg = <0x50>; + }; + + palmas: palmas@48 { + compatible = "ti,palmas"; + interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* IRQ_SYS_1N */ + interrupt-parent = <&gic>; + reg = <0x48>; + interrupt-controller; + #interrupt-cells = <2>; + ti,system-power-controller; + + extcon_usb3: palmas_usb { + compatible = "ti,palmas-usb-vid"; + ti,enable-vbus-detection; + ti,enable-id-detection; + ti,wakeup; + }; + + rtc { + compatible = "ti,palmas-rtc"; + interrupt-parent = <&palmas>; + interrupts = <8 IRQ_TYPE_NONE>; + }; + + palmas_pmic { + compatible = "ti,palmas-pmic"; + interrupt-parent = <&palmas>; + interrupts = <14 IRQ_TYPE_NONE>; + interrupt-name = "short-irq"; + + ti,ldo6-vibrator; + + regulators { + smps123_reg: smps123 { + /* VDD_OPP_MPU */ + regulator-name = "smps123"; + regulator-min-microvolt = < 600000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + smps45_reg: smps45 { + /* VDD_OPP_MM */ + regulator-name = "smps45"; + regulator-min-microvolt = < 600000>; + regulator-max-microvolt = <1310000>; + regulator-always-on; + regulator-boot-on; + }; + + smps6_reg: smps6 { + /* VDD_DDR3 - over VDD_SMPS6 */ + regulator-name = "smps6"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + smps7_reg: smps7 { + /* VDDS_1v8_OMAP over VDDS_1v8_MAIN */ + regulator-name = "smps7"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + smps8_reg: smps8 { + /* VDD_OPP_CORE */ + regulator-name = "smps8"; + regulator-min-microvolt = < 600000>; + regulator-max-microvolt = <1310000>; + regulator-always-on; + regulator-boot-on; + }; + + smps9_reg: smps9 { + /* VDDA_2v1_AUD over VDD_2v1 */ + regulator-name = "smps9"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + ti,smps-range = <0x80>; + regulator-always-on; + regulator-boot-on; + }; + + smps10_out2_reg: smps10_out2 { + /* VBUS_5V_OTG */ + regulator-name = "smps10_out2"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + smps10_out1_reg: smps10_out1 { + /* VBUS_5V_OTG */ + regulator-name = "smps10_out1"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + ldo1_reg: ldo1 { + /* VDDAPHY_CAM: vdda_csiport */ + regulator-name = "ldo1"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1800000>; + }; + + ldo2_reg: ldo2 { + /* VDD_3V3_WLAN */ + regulator-name = "ldo2"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <1000>; + }; + + ldo3_reg: ldo3 { + /* VCC_1V5_AUD */ + regulator-name = "ldo3"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo4_reg: ldo4 { + /* VDDAPHY_DISP: vdda_dsiport/hdmi */ + regulator-name = "ldo4"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1800000>; + }; + + ldo5_reg: ldo5 { + /* VDDA_1V8_PHY: usb/sata/hdmi.. */ + regulator-name = "ldo5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo6_reg: ldo6 { + /* VDDS_1V2_WKUP: hsic/ldo_emu_wkup */ + regulator-name = "ldo6"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo7_reg: ldo7 { + /* VDD_VPP: vpp1 */ + regulator-name = "ldo7"; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + /* Only for efuse reprograming! */ + status = "disabled"; + }; + + ldo8_reg: ldo8 { + /* VDD_3v0: Does not go anywhere */ + regulator-name = "ldo8"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + /* Unused */ + status = "disabled"; + }; + + ldo9_reg: ldo9 { + /* VCC_DV_SDIO: vdds_sdcard */ + regulator-name = "ldo9"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + }; + + ldoln_reg: ldoln { + /* VDDA_1v8_REF: vdds_osc/mm_l4per.. */ + regulator-name = "ldoln"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldousb_reg: ldousb { + /* VDDA_3V_USB: VDDA_USBHS33 */ + regulator-name = "ldousb"; + regulator-min-microvolt = <3250000>; + regulator-max-microvolt = <3250000>; + regulator-always-on; + regulator-boot-on; + }; + + regen3_reg: regen3 { + /* REGEN3 controls LDO9 supply to card */ + regulator-name = "regen3"; + regulator-always-on; + regulator-boot-on; + }; + }; + }; + }; +}; + +&usbhshost { + port2-mode = "ehci-hsic"; + port3-mode = "ehci-hsic"; +}; + +&usbhsehci { + phys = <0 &hsusb2_phy &hsusb3_phy>; +}; + +&cpu0 { + cpu0-supply = <&smps123_reg>; +}; diff --git a/arch/arm/boot/dts/omap5-sbc-t54.dts b/arch/arm/boot/dts/omap5-sbc-t54.dts new file mode 100644 index 000000000000..aa98fea3f2b3 --- /dev/null +++ b/arch/arm/boot/dts/omap5-sbc-t54.dts @@ -0,0 +1,51 @@ +/* + * Suppport for CompuLab SBC-T54 with CM-T54 + */ + +#include "omap5-cm-t54.dts" + +/ { + model = "CompuLab SBC-T54 with CM-T54"; + compatible = "compulab,omap5-sbc-t54", "compulab,omap5-cm-t54", "ti,omap5"; +}; + +&omap5_pmx_core { + i2c4_pins: pinmux_i2c4_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x00f8, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_scl */ + OMAP5_IOPAD(0x00fa, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */ + >; + }; + + mmc1_aux_pins: pinmux_mmc1_aux_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x0174, PIN_INPUT_PULLUP | MUX_MODE6) /* gpio8_228 */ + OMAP5_IOPAD(0x0176, PIN_INPUT_PULLUP | MUX_MODE6) /* gpio8_229 */ + >; + }; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = < + &mmc1_pins + &mmc1_aux_pins + >; + cd-inverted; + wp-inverted; + cd-gpios = <&gpio8 4 GPIO_ACTIVE_LOW>; /* gpio8_228 */ + wp-gpios = <&gpio8 5 GPIO_ACTIVE_LOW>; /* gpio8_229 */ +}; + +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_pins>; + + clock-frequency = <400000>; + + at24@50 { + compatible = "at24,24c02"; + pagesize = <16>; + reg = <0x50>; + }; +}; diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 36b4312a5e0d..e58be57984ab 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -82,6 +82,12 @@ <GIC_PPI 10 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>; }; + pmu { + compatible = "arm,cortex-a15-pmu"; + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>; + }; + gic: interrupt-controller@48211000 { compatible = "arm,cortex-a15-gic"; interrupt-controller; @@ -810,6 +816,8 @@ compatible = "ti,omap-usb2"; reg = <0x4a084000 0x7c>; ctrl-module = <&omap_control_usb2phy>; + clocks = <&usb_phy_cm_clk32k>, <&usb_otg_ss_refclk960m>; + clock-names = "wkupclk", "refclk"; #phy-cells = <0>; }; @@ -876,6 +884,46 @@ #thermal-sensor-cells = <1>; }; + + omap_control_sata: control-phy@4a002374 { + compatible = "ti,control-phy-pipe3"; + reg = <0x4a002374 0x4>; + reg-names = "power"; + clocks = <&sys_clkin>; + clock-names = "sysclk"; + }; + + /* OCP2SCP3 */ + ocp2scp@4a090000 { + compatible = "ti,omap-ocp2scp"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x4a090000 0x20>; + ranges; + ti,hwmods = "ocp2scp3"; + sata_phy: phy@4a096000 { + compatible = "ti,phy-pipe3-sata"; + reg = <0x4A096000 0x80>, /* phy_rx */ + <0x4A096400 0x64>, /* phy_tx */ + <0x4A096800 0x40>; /* pll_ctrl */ + reg-names = "phy_rx", "phy_tx", "pll_ctrl"; + ctrl-module = <&omap_control_sata>; + clocks = <&sys_clkin>; + clock-names = "sysclk"; + #phy-cells = <0>; + }; + }; + + sata: sata@4a141100 { + compatible = "snps,dwc-ahci"; + reg = <0x4a140000 0x1100>, <0x4a141100 0x7>; + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; + phys = <&sata_phy>; + phy-names = "sata-phy"; + clocks = <&sata_ref_clk>; + ti,hwmods = "sata"; + }; + }; }; diff --git a/arch/arm/boot/dts/omap54xx-clocks.dtsi b/arch/arm/boot/dts/omap54xx-clocks.dtsi index d487fdab3921..aeb142ce8e9d 100644 --- a/arch/arm/boot/dts/omap54xx-clocks.dtsi +++ b/arch/arm/boot/dts/omap54xx-clocks.dtsi @@ -120,10 +120,8 @@ compatible = "ti,divider-clock"; clocks = <&dpll_abe_x2_ck>; ti,max-div = <31>; - ti,autoidle-shift = <8>; reg = <0x01f0>; ti,index-starts-at-one; - ti,invert-autoidle-bit; }; abe_24m_fclk: abe_24m_fclk { @@ -145,10 +143,11 @@ abe_iclk: abe_iclk { #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clocks = <&abe_clk>; - clock-mult = <1>; - clock-div = <2>; + compatible = "ti,divider-clock"; + clocks = <&aess_fclk>; + ti,bit-shift = <24>; + reg = <0x0528>; + ti,dividers = <2>, <1>; }; abe_lp_clk_div: abe_lp_clk_div { @@ -164,10 +163,8 @@ compatible = "ti,divider-clock"; clocks = <&dpll_abe_x2_ck>; ti,max-div = <31>; - ti,autoidle-shift = <8>; reg = <0x01f4>; ti,index-starts-at-one; - ti,invert-autoidle-bit; }; dpll_core_ck: dpll_core_ck { @@ -188,10 +185,8 @@ compatible = "ti,divider-clock"; clocks = <&dpll_core_x2_ck>; ti,max-div = <63>; - ti,autoidle-shift = <8>; reg = <0x0150>; ti,index-starts-at-one; - ti,invert-autoidle-bit; }; c2c_fclk: c2c_fclk { @@ -215,10 +210,8 @@ compatible = "ti,divider-clock"; clocks = <&dpll_core_x2_ck>; ti,max-div = <63>; - ti,autoidle-shift = <8>; reg = <0x0138>; ti,index-starts-at-one; - ti,invert-autoidle-bit; }; dpll_core_h12x2_ck: dpll_core_h12x2_ck { @@ -226,10 +219,8 @@ compatible = "ti,divider-clock"; clocks = <&dpll_core_x2_ck>; ti,max-div = <63>; - ti,autoidle-shift = <8>; reg = <0x013c>; ti,index-starts-at-one; - ti,invert-autoidle-bit; }; dpll_core_h13x2_ck: dpll_core_h13x2_ck { @@ -237,10 +228,8 @@ compatible = "ti,divider-clock"; clocks = <&dpll_core_x2_ck>; ti,max-div = <63>; - ti,autoidle-shift = <8>; reg = <0x0140>; ti,index-starts-at-one; - ti,invert-autoidle-bit; }; dpll_core_h14x2_ck: dpll_core_h14x2_ck { @@ -248,10 +237,8 @@ compatible = "ti,divider-clock"; clocks = <&dpll_core_x2_ck>; ti,max-div = <63>; - ti,autoidle-shift = <8>; reg = <0x0144>; ti,index-starts-at-one; - ti,invert-autoidle-bit; }; dpll_core_h22x2_ck: dpll_core_h22x2_ck { @@ -259,10 +246,8 @@ compatible = "ti,divider-clock"; clocks = <&dpll_core_x2_ck>; ti,max-div = <63>; - ti,autoidle-shift = <8>; reg = <0x0154>; ti,index-starts-at-one; - ti,invert-autoidle-bit; }; dpll_core_h23x2_ck: dpll_core_h23x2_ck { @@ -270,10 +255,8 @@ compatible = "ti,divider-clock"; clocks = <&dpll_core_x2_ck>; ti,max-div = <63>; - ti,autoidle-shift = <8>; reg = <0x0158>; ti,index-starts-at-one; - ti,invert-autoidle-bit; }; dpll_core_h24x2_ck: dpll_core_h24x2_ck { @@ -281,10 +264,8 @@ compatible = "ti,divider-clock"; clocks = <&dpll_core_x2_ck>; ti,max-div = <63>; - ti,autoidle-shift = <8>; reg = <0x015c>; ti,index-starts-at-one; - ti,invert-autoidle-bit; }; dpll_core_m2_ck: dpll_core_m2_ck { @@ -292,10 +273,8 @@ compatible = "ti,divider-clock"; clocks = <&dpll_core_ck>; ti,max-div = <31>; - ti,autoidle-shift = <8>; reg = <0x0130>; ti,index-starts-at-one; - ti,invert-autoidle-bit; }; dpll_core_m3x2_ck: dpll_core_m3x2_ck { @@ -303,10 +282,8 @@ compatible = "ti,divider-clock"; clocks = <&dpll_core_x2_ck>; ti,max-div = <31>; - ti,autoidle-shift = <8>; reg = <0x0134>; ti,index-starts-at-one; - ti,invert-autoidle-bit; }; iva_dpll_hs_clk_div: iva_dpll_hs_clk_div { @@ -335,10 +312,8 @@ compatible = "ti,divider-clock"; clocks = <&dpll_iva_x2_ck>; ti,max-div = <63>; - ti,autoidle-shift = <8>; reg = <0x01b8>; ti,index-starts-at-one; - ti,invert-autoidle-bit; }; dpll_iva_h12x2_ck: dpll_iva_h12x2_ck { @@ -346,10 +321,8 @@ compatible = "ti,divider-clock"; clocks = <&dpll_iva_x2_ck>; ti,max-div = <63>; - ti,autoidle-shift = <8>; reg = <0x01bc>; ti,index-starts-at-one; - ti,invert-autoidle-bit; }; mpu_dpll_hs_clk_div: mpu_dpll_hs_clk_div { @@ -372,10 +345,8 @@ compatible = "ti,divider-clock"; clocks = <&dpll_mpu_ck>; ti,max-div = <31>; - ti,autoidle-shift = <8>; reg = <0x0170>; ti,index-starts-at-one; - ti,invert-autoidle-bit; }; per_dpll_hs_clk_div: per_dpll_hs_clk_div { @@ -642,10 +613,8 @@ compatible = "ti,divider-clock"; clocks = <&dpll_per_x2_ck>; ti,max-div = <63>; - ti,autoidle-shift = <8>; reg = <0x0158>; ti,index-starts-at-one; - ti,invert-autoidle-bit; }; dpll_per_h12x2_ck: dpll_per_h12x2_ck { @@ -653,10 +622,8 @@ compatible = "ti,divider-clock"; clocks = <&dpll_per_x2_ck>; ti,max-div = <63>; - ti,autoidle-shift = <8>; reg = <0x015c>; ti,index-starts-at-one; - ti,invert-autoidle-bit; }; dpll_per_h14x2_ck: dpll_per_h14x2_ck { @@ -664,10 +631,8 @@ compatible = "ti,divider-clock"; clocks = <&dpll_per_x2_ck>; ti,max-div = <63>; - ti,autoidle-shift = <8>; reg = <0x0164>; ti,index-starts-at-one; - ti,invert-autoidle-bit; }; dpll_per_m2_ck: dpll_per_m2_ck { @@ -675,10 +640,8 @@ compatible = "ti,divider-clock"; clocks = <&dpll_per_ck>; ti,max-div = <31>; - ti,autoidle-shift = <8>; reg = <0x0150>; ti,index-starts-at-one; - ti,invert-autoidle-bit; }; dpll_per_m2x2_ck: dpll_per_m2x2_ck { @@ -686,10 +649,8 @@ compatible = "ti,divider-clock"; clocks = <&dpll_per_x2_ck>; ti,max-div = <31>; - ti,autoidle-shift = <8>; reg = <0x0150>; ti,index-starts-at-one; - ti,invert-autoidle-bit; }; dpll_per_m3x2_ck: dpll_per_m3x2_ck { @@ -697,10 +658,8 @@ compatible = "ti,divider-clock"; clocks = <&dpll_per_x2_ck>; ti,max-div = <31>; - ti,autoidle-shift = <8>; reg = <0x0154>; ti,index-starts-at-one; - ti,invert-autoidle-bit; }; dpll_unipro1_ck: dpll_unipro1_ck { @@ -723,10 +682,8 @@ compatible = "ti,divider-clock"; clocks = <&dpll_unipro1_ck>; ti,max-div = <127>; - ti,autoidle-shift = <8>; reg = <0x0210>; ti,index-starts-at-one; - ti,invert-autoidle-bit; }; dpll_unipro2_ck: dpll_unipro2_ck { @@ -749,10 +706,8 @@ compatible = "ti,divider-clock"; clocks = <&dpll_unipro2_ck>; ti,max-div = <127>; - ti,autoidle-shift = <8>; reg = <0x01d0>; ti,index-starts-at-one; - ti,invert-autoidle-bit; }; dpll_usb_ck: dpll_usb_ck { @@ -775,10 +730,8 @@ compatible = "ti,divider-clock"; clocks = <&dpll_usb_ck>; ti,max-div = <127>; - ti,autoidle-shift = <8>; reg = <0x0190>; ti,index-starts-at-one; - ti,invert-autoidle-bit; }; func_128m_clk: func_128m_clk { @@ -851,6 +804,7 @@ clocks = <&dpll_per_h12x2_ck>; ti,bit-shift = <8>; reg = <0x1420>; + ti,set-rate-parent; }; dss_sys_clk: dss_sys_clk { diff --git a/arch/arm/boot/dts/prima2.dtsi b/arch/arm/boot/dts/prima2.dtsi index 7e7d8843abaf..3df7ba860282 100644 --- a/arch/arm/boot/dts/prima2.dtsi +++ b/arch/arm/boot/dts/prima2.dtsi @@ -314,8 +314,9 @@ reg = <0xb00d0000 0x10000>; interrupts = <15>; sirf,spi-num-chipselects = <1>; - sirf,spi-dma-rx-channel = <25>; - sirf,spi-dma-tx-channel = <20>; + dmas = <&dmac1 9>, + <&dmac1 4>; + dma-names = "rx", "tx"; #address-cells = <1>; #size-cells = <0>; clocks = <&clks 19>; @@ -328,8 +329,9 @@ reg = <0xb0170000 0x10000>; interrupts = <16>; sirf,spi-num-chipselects = <1>; - sirf,spi-dma-rx-channel = <12>; - sirf,spi-dma-tx-channel = <13>; + dmas = <&dmac0 12>, + <&dmac0 13>; + dma-names = "rx", "tx"; #address-cells = <1>; #size-cells = <0>; clocks = <&clks 20>; diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts new file mode 100644 index 000000000000..7c2441d526bc --- /dev/null +++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts @@ -0,0 +1,16 @@ +#include "qcom-apq8064-v2.0.dtsi" + +/ { + model = "Qualcomm APQ8064/IFC6410"; + compatible = "qcom,apq8064-ifc6410", "qcom,apq8064"; + + soc { + gsbi@16600000 { + status = "ok"; + qcom,mode = <GSBI_PROT_I2C_UART>; + serial@16640000 { + status = "ok"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/qcom-apq8064-v2.0.dtsi b/arch/arm/boot/dts/qcom-apq8064-v2.0.dtsi new file mode 100644 index 000000000000..935c3945fc5e --- /dev/null +++ b/arch/arm/boot/dts/qcom-apq8064-v2.0.dtsi @@ -0,0 +1 @@ +#include "qcom-apq8064.dtsi" diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi new file mode 100644 index 000000000000..92bf793622c3 --- /dev/null +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -0,0 +1,170 @@ +/dts-v1/; + +#include "skeleton.dtsi" +#include <dt-bindings/clock/qcom,gcc-msm8960.h> +#include <dt-bindings/soc/qcom,gsbi.h> + +/ { + model = "Qualcomm APQ8064"; + compatible = "qcom,apq8064"; + interrupt-parent = <&intc>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "qcom,krait"; + enable-method = "qcom,kpss-acc-v1"; + device_type = "cpu"; + reg = <0>; + next-level-cache = <&L2>; + qcom,acc = <&acc0>; + qcom,saw = <&saw0>; + }; + + cpu@1 { + compatible = "qcom,krait"; + enable-method = "qcom,kpss-acc-v1"; + device_type = "cpu"; + reg = <1>; + next-level-cache = <&L2>; + qcom,acc = <&acc1>; + qcom,saw = <&saw1>; + }; + + cpu@2 { + compatible = "qcom,krait"; + enable-method = "qcom,kpss-acc-v1"; + device_type = "cpu"; + reg = <2>; + next-level-cache = <&L2>; + qcom,acc = <&acc2>; + qcom,saw = <&saw2>; + }; + + cpu@3 { + compatible = "qcom,krait"; + enable-method = "qcom,kpss-acc-v1"; + device_type = "cpu"; + reg = <3>; + next-level-cache = <&L2>; + qcom,acc = <&acc3>; + qcom,saw = <&saw3>; + }; + + L2: l2-cache { + compatible = "cache"; + cache-level = <2>; + }; + }; + + cpu-pmu { + compatible = "qcom,krait-pmu"; + interrupts = <1 10 0x304>; + }; + + soc: soc { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "simple-bus"; + + intc: interrupt-controller@2000000 { + compatible = "qcom,msm-qgic2"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x02000000 0x1000>, + <0x02002000 0x1000>; + }; + + timer@200a000 { + compatible = "qcom,kpss-timer", "qcom,msm-timer"; + interrupts = <1 1 0x301>, + <1 2 0x301>, + <1 3 0x301>; + reg = <0x0200a000 0x100>; + clock-frequency = <27000000>, + <32768>; + cpu-offset = <0x80000>; + }; + + acc0: clock-controller@2088000 { + compatible = "qcom,kpss-acc-v1"; + reg = <0x02088000 0x1000>, <0x02008000 0x1000>; + }; + + acc1: clock-controller@2098000 { + compatible = "qcom,kpss-acc-v1"; + reg = <0x02098000 0x1000>, <0x02008000 0x1000>; + }; + + acc2: clock-controller@20a8000 { + compatible = "qcom,kpss-acc-v1"; + reg = <0x020a8000 0x1000>, <0x02008000 0x1000>; + }; + + acc3: clock-controller@20b8000 { + compatible = "qcom,kpss-acc-v1"; + reg = <0x020b8000 0x1000>, <0x02008000 0x1000>; + }; + + saw0: regulator@2089000 { + compatible = "qcom,saw2"; + reg = <0x02089000 0x1000>, <0x02009000 0x1000>; + regulator; + }; + + saw1: regulator@2099000 { + compatible = "qcom,saw2"; + reg = <0x02099000 0x1000>, <0x02009000 0x1000>; + regulator; + }; + + saw2: regulator@20a9000 { + compatible = "qcom,saw2"; + reg = <0x020a9000 0x1000>, <0x02009000 0x1000>; + regulator; + }; + + saw3: regulator@20b9000 { + compatible = "qcom,saw2"; + reg = <0x020b9000 0x1000>, <0x02009000 0x1000>; + regulator; + }; + + gsbi7: gsbi@16600000 { + status = "disabled"; + compatible = "qcom,gsbi-v1.0.0"; + reg = <0x16600000 0x100>; + clocks = <&gcc GSBI7_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + serial@16640000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x16640000 0x1000>, + <0x16600000 0x1000>; + interrupts = <0 158 0x0>; + clocks = <&gcc GSBI7_UART_CLK>, <&gcc GSBI7_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + }; + + qcom,ssbi@500000 { + compatible = "qcom,ssbi"; + reg = <0x00500000 0x1000>; + qcom,controller-type = "pmic-arbiter"; + }; + + gcc: clock-controller@900000 { + compatible = "qcom,gcc-apq8064"; + reg = <0x00900000 0x4000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + }; +}; diff --git a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts index 13ac3e222495..b4dfb01fe6fb 100644 --- a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts +++ b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts @@ -3,4 +3,43 @@ / { model = "Qualcomm APQ8074 Dragonboard"; compatible = "qcom,apq8074-dragonboard", "qcom,apq8074"; + + soc { + serial@f991e000 { + status = "ok"; + }; + + sdhci@f9824900 { + bus-width = <8>; + non-removable; + status = "ok"; + }; + + sdhci@f98a4900 { + cd-gpios = <&msmgpio 62 0x1>; + bus-width = <4>; + }; + + + pinctrl@fd510000 { + spi8_default: spi8_default { + mosi { + pins = "gpio45"; + function = "blsp_spi8"; + }; + miso { + pins = "gpio46"; + function = "blsp_spi8"; + }; + cs { + pins = "gpio47"; + function = "blsp_spi8"; + }; + clk { + pins = "gpio48"; + function = "blsp_spi8"; + }; + }; + }; + }; }; diff --git a/arch/arm/boot/dts/qcom-apq8084-mtp.dts b/arch/arm/boot/dts/qcom-apq8084-mtp.dts new file mode 100644 index 000000000000..9dae3878b71d --- /dev/null +++ b/arch/arm/boot/dts/qcom-apq8084-mtp.dts @@ -0,0 +1,6 @@ +#include "qcom-apq8084.dtsi" + +/ { + model = "Qualcomm APQ 8084-MTP"; + compatible = "qcom,apq8084-mtp", "qcom,apq8084"; +}; diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi new file mode 100644 index 000000000000..e3e009a5912b --- /dev/null +++ b/arch/arm/boot/dts/qcom-apq8084.dtsi @@ -0,0 +1,179 @@ +/dts-v1/; + +#include "skeleton.dtsi" + +/ { + model = "Qualcomm APQ 8084"; + compatible = "qcom,apq8084"; + interrupt-parent = <&intc>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "qcom,krait"; + reg = <0>; + enable-method = "qcom,kpss-acc-v2"; + next-level-cache = <&L2>; + qcom,acc = <&acc0>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "qcom,krait"; + reg = <1>; + enable-method = "qcom,kpss-acc-v2"; + next-level-cache = <&L2>; + qcom,acc = <&acc1>; + }; + + cpu@2 { + device_type = "cpu"; + compatible = "qcom,krait"; + reg = <2>; + enable-method = "qcom,kpss-acc-v2"; + next-level-cache = <&L2>; + qcom,acc = <&acc2>; + }; + + cpu@3 { + device_type = "cpu"; + compatible = "qcom,krait"; + reg = <3>; + enable-method = "qcom,kpss-acc-v2"; + next-level-cache = <&L2>; + qcom,acc = <&acc3>; + }; + + L2: l2-cache { + compatible = "qcom,arch-cache"; + cache-level = <2>; + qcom,saw = <&saw_l2>; + }; + }; + + cpu-pmu { + compatible = "qcom,krait-pmu"; + interrupts = <1 7 0xf04>; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <1 2 0xf08>, + <1 3 0xf08>, + <1 4 0xf08>, + <1 1 0xf08>; + clock-frequency = <19200000>; + }; + + soc: soc { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "simple-bus"; + + intc: interrupt-controller@f9000000 { + compatible = "qcom,msm-qgic2"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0xf9000000 0x1000>, + <0xf9002000 0x1000>; + }; + + timer@f9020000 { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "arm,armv7-timer-mem"; + reg = <0xf9020000 0x1000>; + clock-frequency = <19200000>; + + frame@f9021000 { + frame-number = <0>; + interrupts = <0 8 0x4>, + <0 7 0x4>; + reg = <0xf9021000 0x1000>, + <0xf9022000 0x1000>; + }; + + frame@f9023000 { + frame-number = <1>; + interrupts = <0 9 0x4>; + reg = <0xf9023000 0x1000>; + status = "disabled"; + }; + + frame@f9024000 { + frame-number = <2>; + interrupts = <0 10 0x4>; + reg = <0xf9024000 0x1000>; + status = "disabled"; + }; + + frame@f9025000 { + frame-number = <3>; + interrupts = <0 11 0x4>; + reg = <0xf9025000 0x1000>; + status = "disabled"; + }; + + frame@f9026000 { + frame-number = <4>; + interrupts = <0 12 0x4>; + reg = <0xf9026000 0x1000>; + status = "disabled"; + }; + + frame@f9027000 { + frame-number = <5>; + interrupts = <0 13 0x4>; + reg = <0xf9027000 0x1000>; + status = "disabled"; + }; + + frame@f9028000 { + frame-number = <6>; + interrupts = <0 14 0x4>; + reg = <0xf9028000 0x1000>; + status = "disabled"; + }; + }; + + saw_l2: regulator@f9012000 { + compatible = "qcom,saw2"; + reg = <0xf9012000 0x1000>; + regulator; + }; + + acc0: clock-controller@f9088000 { + compatible = "qcom,kpss-acc-v2"; + reg = <0xf9088000 0x1000>, + <0xf9008000 0x1000>; + }; + + acc1: clock-controller@f9098000 { + compatible = "qcom,kpss-acc-v2"; + reg = <0xf9098000 0x1000>, + <0xf9008000 0x1000>; + }; + + acc2: clock-controller@f90a8000 { + compatible = "qcom,kpss-acc-v2"; + reg = <0xf90a8000 0x1000>, + <0xf9008000 0x1000>; + }; + + acc3: clock-controller@f90b8000 { + compatible = "qcom,kpss-acc-v2"; + reg = <0xf90b8000 0x1000>, + <0xf9008000 0x1000>; + }; + + restart@fc4ab000 { + compatible = "qcom,pshold"; + reg = <0xfc4ab000 0x4>; + }; + }; +}; diff --git a/arch/arm/boot/dts/qcom-msm8660-surf.dts b/arch/arm/boot/dts/qcom-msm8660-surf.dts index 169bad90dac9..45180adfadf1 100644 --- a/arch/arm/boot/dts/qcom-msm8660-surf.dts +++ b/arch/arm/boot/dts/qcom-msm8660-surf.dts @@ -3,4 +3,14 @@ / { model = "Qualcomm MSM8660 SURF"; compatible = "qcom,msm8660-surf", "qcom,msm8660"; + + soc { + gsbi@19c00000 { + status = "ok"; + qcom,mode = <GSBI_PROT_I2C_UART>; + serial@19c40000 { + status = "ok"; + }; + }; + }; }; diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi index c52a9e964a44..53837aaa2f72 100644 --- a/arch/arm/boot/dts/qcom-msm8660.dtsi +++ b/arch/arm/boot/dts/qcom-msm8660.dtsi @@ -3,6 +3,7 @@ /include/ "skeleton.dtsi" #include <dt-bindings/clock/qcom,gcc-msm8660.h> +#include <dt-bindings/soc/qcom,gsbi.h> / { model = "Qualcomm MSM8660"; @@ -12,16 +13,18 @@ cpus { #address-cells = <1>; #size-cells = <0>; - compatible = "qcom,scorpion"; - enable-method = "qcom,gcc-msm8660"; cpu@0 { + compatible = "qcom,scorpion"; + enable-method = "qcom,gcc-msm8660"; device_type = "cpu"; reg = <0>; next-level-cache = <&L2>; }; cpu@1 { + compatible = "qcom,scorpion"; + enable-method = "qcom,gcc-msm8660"; device_type = "cpu"; reg = <1>; next-level-cache = <&L2>; @@ -33,55 +36,73 @@ }; }; - intc: interrupt-controller@2080000 { - compatible = "qcom,msm-8660-qgic"; - interrupt-controller; - #interrupt-cells = <3>; - reg = < 0x02080000 0x1000 >, - < 0x02081000 0x1000 >; - }; + soc: soc { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "simple-bus"; - timer@2000000 { - compatible = "qcom,scss-timer", "qcom,msm-timer"; - interrupts = <1 0 0x301>, - <1 1 0x301>, - <1 2 0x301>; - reg = <0x02000000 0x100>; - clock-frequency = <27000000>, - <32768>; - cpu-offset = <0x40000>; - }; + intc: interrupt-controller@2080000 { + compatible = "qcom,msm-8660-qgic"; + interrupt-controller; + #interrupt-cells = <3>; + reg = < 0x02080000 0x1000 >, + < 0x02081000 0x1000 >; + }; - msmgpio: gpio@800000 { - compatible = "qcom,msm-gpio"; - reg = <0x00800000 0x4000>; - gpio-controller; - #gpio-cells = <2>; - ngpio = <173>; - interrupts = <0 16 0x4>; - interrupt-controller; - #interrupt-cells = <2>; - }; + timer@2000000 { + compatible = "qcom,scss-timer", "qcom,msm-timer"; + interrupts = <1 0 0x301>, + <1 1 0x301>, + <1 2 0x301>; + reg = <0x02000000 0x100>; + clock-frequency = <27000000>, + <32768>; + cpu-offset = <0x40000>; + }; - gcc: clock-controller@900000 { - compatible = "qcom,gcc-msm8660"; - #clock-cells = <1>; - #reset-cells = <1>; - reg = <0x900000 0x4000>; - }; + msmgpio: gpio@800000 { + compatible = "qcom,msm-gpio"; + reg = <0x00800000 0x4000>; + gpio-controller; + #gpio-cells = <2>; + ngpio = <173>; + interrupts = <0 16 0x4>; + interrupt-controller; + #interrupt-cells = <2>; + }; - serial@19c40000 { - compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; - reg = <0x19c40000 0x1000>, - <0x19c00000 0x1000>; - interrupts = <0 195 0x0>; - clocks = <&gcc GSBI12_UART_CLK>, <&gcc GSBI12_H_CLK>; - clock-names = "core", "iface"; - }; + gcc: clock-controller@900000 { + compatible = "qcom,gcc-msm8660"; + #clock-cells = <1>; + #reset-cells = <1>; + reg = <0x900000 0x4000>; + }; + + gsbi12: gsbi@19c00000 { + compatible = "qcom,gsbi-v1.0.0"; + reg = <0x19c00000 0x100>; + clocks = <&gcc GSBI12_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; - qcom,ssbi@500000 { - compatible = "qcom,ssbi"; - reg = <0x500000 0x1000>; - qcom,controller-type = "pmic-arbiter"; + serial@19c40000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x19c40000 0x1000>, + <0x19c00000 0x1000>; + interrupts = <0 195 0x0>; + clocks = <&gcc GSBI12_UART_CLK>, <&gcc GSBI12_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + }; + + qcom,ssbi@500000 { + compatible = "qcom,ssbi"; + reg = <0x500000 0x1000>; + qcom,controller-type = "pmic-arbiter"; + }; }; }; diff --git a/arch/arm/boot/dts/qcom-msm8960-cdp.dts b/arch/arm/boot/dts/qcom-msm8960-cdp.dts index a58fb88315f6..8f75cc4c8340 100644 --- a/arch/arm/boot/dts/qcom-msm8960-cdp.dts +++ b/arch/arm/boot/dts/qcom-msm8960-cdp.dts @@ -3,4 +3,14 @@ / { model = "Qualcomm MSM8960 CDP"; compatible = "qcom,msm8960-cdp", "qcom,msm8960"; + + soc { + gsbi@16400000 { + status = "ok"; + qcom,mode = <GSBI_PROT_I2C_UART>; + serial@16440000 { + status = "ok"; + }; + }; + }; }; diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi index 997b7b94e117..5303e53e34dc 100644 --- a/arch/arm/boot/dts/qcom-msm8960.dtsi +++ b/arch/arm/boot/dts/qcom-msm8960.dtsi @@ -3,6 +3,7 @@ /include/ "skeleton.dtsi" #include <dt-bindings/clock/qcom,gcc-msm8960.h> +#include <dt-bindings/soc/qcom,gsbi.h> / { model = "Qualcomm MSM8960"; @@ -13,10 +14,10 @@ #address-cells = <1>; #size-cells = <0>; interrupts = <1 14 0x304>; - compatible = "qcom,krait"; - enable-method = "qcom,kpss-acc-v1"; cpu@0 { + compatible = "qcom,krait"; + enable-method = "qcom,kpss-acc-v1"; device_type = "cpu"; reg = <0>; next-level-cache = <&L2>; @@ -25,6 +26,8 @@ }; cpu@1 { + compatible = "qcom,krait"; + enable-method = "qcom,kpss-acc-v1"; device_type = "cpu"; reg = <1>; next-level-cache = <&L2>; @@ -35,7 +38,6 @@ L2: l2-cache { compatible = "cache"; cache-level = <2>; - interrupts = <0 2 0x4>; }; }; @@ -45,91 +47,109 @@ qcom,no-pc-write; }; - intc: interrupt-controller@2000000 { - compatible = "qcom,msm-qgic2"; - interrupt-controller; - #interrupt-cells = <3>; - reg = < 0x02000000 0x1000 >, - < 0x02002000 0x1000 >; - }; + soc: soc { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "simple-bus"; + + intc: interrupt-controller@2000000 { + compatible = "qcom,msm-qgic2"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x02000000 0x1000>, + <0x02002000 0x1000>; + }; - timer@200a000 { - compatible = "qcom,kpss-timer", "qcom,msm-timer"; - interrupts = <1 1 0x301>, - <1 2 0x301>, - <1 3 0x301>; - reg = <0x0200a000 0x100>; - clock-frequency = <27000000>, - <32768>; - cpu-offset = <0x80000>; - }; + timer@200a000 { + compatible = "qcom,kpss-timer", "qcom,msm-timer"; + interrupts = <1 1 0x301>, + <1 2 0x301>, + <1 3 0x301>; + reg = <0x0200a000 0x100>; + clock-frequency = <27000000>, + <32768>; + cpu-offset = <0x80000>; + }; - msmgpio: gpio@800000 { - compatible = "qcom,msm-gpio"; - gpio-controller; - #gpio-cells = <2>; - ngpio = <150>; - interrupts = <0 16 0x4>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x800000 0x4000>; - }; + msmgpio: gpio@800000 { + compatible = "qcom,msm-gpio"; + gpio-controller; + #gpio-cells = <2>; + ngpio = <150>; + interrupts = <0 16 0x4>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x800000 0x4000>; + }; - gcc: clock-controller@900000 { - compatible = "qcom,gcc-msm8960"; - #clock-cells = <1>; - #reset-cells = <1>; - reg = <0x900000 0x4000>; - }; + gcc: clock-controller@900000 { + compatible = "qcom,gcc-msm8960"; + #clock-cells = <1>; + #reset-cells = <1>; + reg = <0x900000 0x4000>; + }; - clock-controller@4000000 { - compatible = "qcom,mmcc-msm8960"; - reg = <0x4000000 0x1000>; - #clock-cells = <1>; - #reset-cells = <1>; - }; + clock-controller@4000000 { + compatible = "qcom,mmcc-msm8960"; + reg = <0x4000000 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; - acc0: clock-controller@2088000 { - compatible = "qcom,kpss-acc-v1"; - reg = <0x02088000 0x1000>, <0x02008000 0x1000>; - }; + acc0: clock-controller@2088000 { + compatible = "qcom,kpss-acc-v1"; + reg = <0x02088000 0x1000>, <0x02008000 0x1000>; + }; - acc1: clock-controller@2098000 { - compatible = "qcom,kpss-acc-v1"; - reg = <0x02098000 0x1000>, <0x02008000 0x1000>; - }; + acc1: clock-controller@2098000 { + compatible = "qcom,kpss-acc-v1"; + reg = <0x02098000 0x1000>, <0x02008000 0x1000>; + }; - saw0: regulator@2089000 { - compatible = "qcom,saw2"; - reg = <0x02089000 0x1000>, <0x02009000 0x1000>; - regulator; - }; + saw0: regulator@2089000 { + compatible = "qcom,saw2"; + reg = <0x02089000 0x1000>, <0x02009000 0x1000>; + regulator; + }; - saw1: regulator@2099000 { - compatible = "qcom,saw2"; - reg = <0x02099000 0x1000>, <0x02009000 0x1000>; - regulator; - }; + saw1: regulator@2099000 { + compatible = "qcom,saw2"; + reg = <0x02099000 0x1000>, <0x02009000 0x1000>; + regulator; + }; - serial@16440000 { - compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; - reg = <0x16440000 0x1000>, - <0x16400000 0x1000>; - interrupts = <0 154 0x0>; - clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>; - clock-names = "core", "iface"; - }; + gsbi5: gsbi@16400000 { + compatible = "qcom,gsbi-v1.0.0"; + reg = <0x16400000 0x100>; + clocks = <&gcc GSBI5_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + serial@16440000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x16440000 0x1000>, + <0x16400000 0x1000>; + interrupts = <0 154 0x0>; + clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + }; - qcom,ssbi@500000 { - compatible = "qcom,ssbi"; - reg = <0x500000 0x1000>; - qcom,controller-type = "pmic-arbiter"; - }; + qcom,ssbi@500000 { + compatible = "qcom,ssbi"; + reg = <0x500000 0x1000>; + qcom,controller-type = "pmic-arbiter"; + }; - rng@1a500000 { - compatible = "qcom,prng"; - reg = <0x1a500000 0x200>; - clocks = <&gcc PRNG_CLK>; - clock-names = "core"; + rng@1a500000 { + compatible = "qcom,prng"; + reg = <0x1a500000 0x200>; + clocks = <&gcc PRNG_CLK>; + clock-names = "core"; + }; }; }; diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index f68723918b3f..69dca2aca25a 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -13,10 +13,10 @@ #address-cells = <1>; #size-cells = <0>; interrupts = <1 9 0xf04>; - compatible = "qcom,krait"; - enable-method = "qcom,kpss-acc-v2"; cpu@0 { + compatible = "qcom,krait"; + enable-method = "qcom,kpss-acc-v2"; device_type = "cpu"; reg = <0>; next-level-cache = <&L2>; @@ -24,6 +24,8 @@ }; cpu@1 { + compatible = "qcom,krait"; + enable-method = "qcom,kpss-acc-v2"; device_type = "cpu"; reg = <1>; next-level-cache = <&L2>; @@ -31,6 +33,8 @@ }; cpu@2 { + compatible = "qcom,krait"; + enable-method = "qcom,kpss-acc-v2"; device_type = "cpu"; reg = <2>; next-level-cache = <&L2>; @@ -38,6 +42,8 @@ }; cpu@3 { + compatible = "qcom,krait"; + enable-method = "qcom,kpss-acc-v2"; device_type = "cpu"; reg = <3>; next-level-cache = <&L2>; @@ -47,7 +53,6 @@ L2: l2-cache { compatible = "cache"; cache-level = <2>; - interrupts = <0 2 0x4>; qcom,saw = <&saw_l2>; }; }; @@ -57,6 +62,15 @@ interrupts = <1 7 0xf04>; }; + timer { + compatible = "arm,armv7-timer"; + interrupts = <1 2 0xf08>, + <1 3 0xf08>, + <1 4 0xf08>, + <1 1 0xf08>; + clock-frequency = <19200000>; + }; + soc: soc { #address-cells = <1>; #size-cells = <1>; @@ -71,15 +85,6 @@ <0xf9002000 0x1000>; }; - timer { - compatible = "arm,armv7-timer"; - interrupts = <1 2 0xf08>, - <1 3 0xf08>, - <1 4 0xf08>, - <1 1 0xf08>; - clock-frequency = <19200000>; - }; - timer@f9020000 { #address-cells = <1>; #size-cells = <1>; @@ -190,6 +195,29 @@ interrupts = <0 108 0x0>; clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; + status = "disabled"; + }; + + sdhci@f9824900 { + compatible = "qcom,sdhci-msm-v4"; + reg = <0xf9824900 0x11c>, <0xf9824000 0x800>; + reg-names = "hc_mem", "core_mem"; + interrupts = <0 123 0>, <0 138 0>; + interrupt-names = "hc_irq", "pwr_irq"; + clocks = <&gcc GCC_SDCC1_APPS_CLK>, <&gcc GCC_SDCC1_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + sdhci@f98a4900 { + compatible = "qcom,sdhci-msm-v4"; + reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>; + reg-names = "hc_mem", "core_mem"; + interrupts = <0 125 0>, <0 221 0>; + interrupt-names = "hc_irq", "pwr_irq"; + clocks = <&gcc GCC_SDCC2_APPS_CLK>, <&gcc GCC_SDCC2_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; }; rng@f9bff000 { @@ -198,5 +226,15 @@ clocks = <&gcc GCC_PRNG_AHB_CLK>; clock-names = "core"; }; + + msmgpio: pinctrl@fd510000 { + compatible = "qcom,msm8974-pinctrl"; + reg = <0xfd510000 0x4000>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <0 208 0>; + }; }; }; diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi index 62d0211bd192..82c5ac825386 100644 --- a/arch/arm/boot/dts/r8a73a4.dtsi +++ b/arch/arm/boot/dts/r8a73a4.dtsi @@ -55,7 +55,6 @@ #interrupt-cells = <2>; interrupt-controller; reg = <0 0xe61c0000 0 0x200>; - interrupt-parent = <&gic>; interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>, <0 1 IRQ_TYPE_LEVEL_HIGH>, <0 2 IRQ_TYPE_LEVEL_HIGH>, @@ -95,7 +94,6 @@ #interrupt-cells = <2>; interrupt-controller; reg = <0 0xe61c0200 0 0x200>; - interrupt-parent = <&gic>; interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>, <0 33 IRQ_TYPE_LEVEL_HIGH>, <0 34 IRQ_TYPE_LEVEL_HIGH>, @@ -136,7 +134,6 @@ dma0: dma-controller@e6700020 { compatible = "renesas,shdma-r8a73a4"; reg = <0 0xe6700020 0 0x89e0>; - interrupt-parent = <&gic>; interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH 0 200 IRQ_TYPE_LEVEL_HIGH 0 201 IRQ_TYPE_LEVEL_HIGH @@ -171,7 +168,6 @@ compatible = "renesas,rcar-thermal"; reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>, <0 0xe61f0200 0 0x38>, <0 0xe61f0300 0 0x38>; - interrupt-parent = <&gic>; interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>; }; @@ -180,7 +176,6 @@ #size-cells = <0>; compatible = "renesas,rmobile-iic"; reg = <0 0xe6500000 0 0x428>; - interrupt-parent = <&gic>; interrupts = <0 174 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -190,7 +185,6 @@ #size-cells = <0>; compatible = "renesas,rmobile-iic"; reg = <0 0xe6510000 0 0x428>; - interrupt-parent = <&gic>; interrupts = <0 175 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -200,7 +194,6 @@ #size-cells = <0>; compatible = "renesas,rmobile-iic"; reg = <0 0xe6520000 0 0x428>; - interrupt-parent = <&gic>; interrupts = <0 176 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -210,7 +203,6 @@ #size-cells = <0>; compatible = "renesas,rmobile-iic"; reg = <0 0xe6530000 0 0x428>; - interrupt-parent = <&gic>; interrupts = <0 177 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -220,7 +212,6 @@ #size-cells = <0>; compatible = "renesas,rmobile-iic"; reg = <0 0xe6540000 0 0x428>; - interrupt-parent = <&gic>; interrupts = <0 178 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -230,7 +221,6 @@ #size-cells = <0>; compatible = "renesas,rmobile-iic"; reg = <0 0xe60b0000 0 0x428>; - interrupt-parent = <&gic>; interrupts = <0 179 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -240,7 +230,6 @@ #size-cells = <0>; compatible = "renesas,rmobile-iic"; reg = <0 0xe6550000 0 0x428>; - interrupt-parent = <&gic>; interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -250,7 +239,6 @@ #size-cells = <0>; compatible = "renesas,rmobile-iic"; reg = <0 0xe6560000 0 0x428>; - interrupt-parent = <&gic>; interrupts = <0 185 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -260,7 +248,6 @@ #size-cells = <0>; compatible = "renesas,rmobile-iic"; reg = <0 0xe6570000 0 0x428>; - interrupt-parent = <&gic>; interrupts = <0 173 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -268,7 +255,6 @@ mmcif0: mmc@ee200000 { compatible = "renesas,sh-mmcif"; reg = <0 0xee200000 0 0x80>; - interrupt-parent = <&gic>; interrupts = <0 169 IRQ_TYPE_LEVEL_HIGH>; reg-io-width = <4>; status = "disabled"; @@ -277,7 +263,6 @@ mmcif1: mmc@ee220000 { compatible = "renesas,sh-mmcif"; reg = <0 0xee220000 0 0x80>; - interrupt-parent = <&gic>; interrupts = <0 170 IRQ_TYPE_LEVEL_HIGH>; reg-io-width = <4>; status = "disabled"; @@ -309,7 +294,6 @@ sdhi0: sd@ee100000 { compatible = "renesas,sdhi-r8a73a4"; reg = <0 0xee100000 0 0x100>; - interrupt-parent = <&gic>; interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>; cap-sd-highspeed; status = "disabled"; @@ -318,7 +302,6 @@ sdhi1: sd@ee120000 { compatible = "renesas,sdhi-r8a73a4"; reg = <0 0xee120000 0 0x100>; - interrupt-parent = <&gic>; interrupts = <0 166 IRQ_TYPE_LEVEL_HIGH>; cap-sd-highspeed; status = "disabled"; @@ -327,7 +310,6 @@ sdhi2: sd@ee140000 { compatible = "renesas,sdhi-r8a73a4"; reg = <0 0xee140000 0 0x100>; - interrupt-parent = <&gic>; interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH>; cap-sd-highspeed; status = "disabled"; diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts index 95a849bf921f..486007d7ffe4 100644 --- a/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts +++ b/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts @@ -11,6 +11,7 @@ /dts-v1/; #include "r8a7740.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/pwm/pwm.h> @@ -77,26 +78,26 @@ power-key { gpios = <&pfc 99 GPIO_ACTIVE_LOW>; - linux,code = <116>; + linux,code = <KEY_POWER>; label = "SW3"; gpio-key,wakeup; }; back-key { gpios = <&pfc 100 GPIO_ACTIVE_LOW>; - linux,code = <158>; + linux,code = <KEY_BACK>; label = "SW4"; }; menu-key { gpios = <&pfc 97 GPIO_ACTIVE_LOW>; - linux,code = <139>; + linux,code = <KEY_MENU>; label = "SW5"; }; home-key { gpios = <&pfc 98 GPIO_ACTIVE_LOW>; - linux,code = <102>; + linux,code = <KEY_HOME>; label = "SW6"; }; }; @@ -117,6 +118,16 @@ }; }; + i2c2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "i2c-gpio"; + gpios = <&pfc 208 GPIO_ACTIVE_HIGH /* sda */ + &pfc 91 GPIO_ACTIVE_HIGH /* scl */ + >; + i2c-gpio,delay-us = <5>; + }; + backlight { compatible = "pwm-backlight"; pwms = <&tpu 2 33333 PWM_POLARITY_INVERTED>; @@ -147,6 +158,18 @@ }; }; +ðer { + pinctrl-0 = <ðer_pins>; + pinctrl-names = "default"; + + phy-handle = <&phy0>; + status = "ok"; + + phy0: ethernet-phy@0 { + reg = <0>; + }; +}; + &i2c0 { status = "okay"; touchscreen@55 { @@ -166,10 +189,23 @@ }; }; +&i2c2 { + status = "okay"; + rtc@30 { + compatible = "sii,s35390a"; + reg = <0x30>; + }; +}; + &pfc { pinctrl-0 = <&scifa1_pins>; pinctrl-names = "default"; + ether_pins: ether { + renesas,groups = "gether_mii", "gether_int"; + renesas,function = "gether"; + }; + scifa1_pins: serial1 { renesas,groups = "scifa1_data"; renesas,function = "scifa1"; diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi index 97a9545f5232..55d29f4d2ed6 100644 --- a/arch/arm/boot/dts/r8a7740.dtsi +++ b/arch/arm/boot/dts/r8a7740.dtsi @@ -14,6 +14,7 @@ / { compatible = "renesas,r8a7740"; + interrupt-parent = <&gic>; cpus { #address-cells = <1>; @@ -49,7 +50,6 @@ <0xe6900020 1>, <0xe6900040 1>, <0xe6900060 1>; - interrupt-parent = <&gic>; interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH 0 149 IRQ_TYPE_LEVEL_HIGH 0 149 IRQ_TYPE_LEVEL_HIGH @@ -70,7 +70,6 @@ <0xe6900024 1>, <0xe6900044 1>, <0xe6900064 1>; - interrupt-parent = <&gic>; interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH 0 149 IRQ_TYPE_LEVEL_HIGH 0 149 IRQ_TYPE_LEVEL_HIGH @@ -91,7 +90,6 @@ <0xe6900028 1>, <0xe6900048 1>, <0xe6900068 1>; - interrupt-parent = <&gic>; interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH 0 149 IRQ_TYPE_LEVEL_HIGH 0 149 IRQ_TYPE_LEVEL_HIGH @@ -112,7 +110,6 @@ <0xe690002c 1>, <0xe690004c 1>, <0xe690006c 1>; - interrupt-parent = <&gic>; interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH 0 149 IRQ_TYPE_LEVEL_HIGH 0 149 IRQ_TYPE_LEVEL_HIGH @@ -123,12 +120,23 @@ 0 149 IRQ_TYPE_LEVEL_HIGH>; }; + ether: ethernet@e9a00000 { + compatible = "renesas,gether-r8a7740"; + reg = <0xe9a00000 0x800>, + <0xe9a01800 0x800>; + interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>; + /* clocks = <&mstp3_clks R8A7740_CLK_GETHER>; */ + phy-mode = "mii"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + i2c0: i2c@fff20000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,rmobile-iic"; + compatible = "renesas,iic-r8a7740", "renesas,rmobile-iic"; reg = <0xfff20000 0x425>; - interrupt-parent = <&gic>; interrupts = <0 201 IRQ_TYPE_LEVEL_HIGH 0 202 IRQ_TYPE_LEVEL_HIGH 0 203 IRQ_TYPE_LEVEL_HIGH @@ -139,9 +147,8 @@ i2c1: i2c@e6c20000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,rmobile-iic"; + compatible = "renesas,iic-r8a7740", "renesas,rmobile-iic"; reg = <0xe6c20000 0x425>; - interrupt-parent = <&gic>; interrupts = <0 70 IRQ_TYPE_LEVEL_HIGH 0 71 IRQ_TYPE_LEVEL_HIGH 0 72 IRQ_TYPE_LEVEL_HIGH @@ -174,9 +181,8 @@ }; mmcif0: mmc@e6bd0000 { - compatible = "renesas,sh-mmcif"; + compatible = "renesas,mmcif-r8a7740", "renesas,sh-mmcif"; reg = <0xe6bd0000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH 0 57 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; @@ -185,7 +191,6 @@ sdhi0: sd@e6850000 { compatible = "renesas,sdhi-r8a7740"; reg = <0xe6850000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 117 IRQ_TYPE_LEVEL_HIGH 0 118 IRQ_TYPE_LEVEL_HIGH 0 119 IRQ_TYPE_LEVEL_HIGH>; @@ -197,7 +202,6 @@ sdhi1: sd@e6860000 { compatible = "renesas,sdhi-r8a7740"; reg = <0xe6860000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 121 IRQ_TYPE_LEVEL_HIGH 0 122 IRQ_TYPE_LEVEL_HIGH 0 123 IRQ_TYPE_LEVEL_HIGH>; @@ -209,7 +213,6 @@ sdhi2: sd@e6870000 { compatible = "renesas,sdhi-r8a7740"; reg = <0xe6870000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH 0 126 IRQ_TYPE_LEVEL_HIGH 0 127 IRQ_TYPE_LEVEL_HIGH>; @@ -220,9 +223,8 @@ sh_fsi2: sound@fe1f0000 { #sound-dai-cells = <1>; - compatible = "renesas,sh_fsi2"; + compatible = "renesas,fsi2-r8a7740", "renesas,sh_fsi2"; reg = <0xfe1f0000 0x400>; - interrupt-parent = <&gic>; interrupts = <0 9 0x4>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/r8a7778-bockw-reference.dts b/arch/arm/boot/dts/r8a7778-bockw-reference.dts index 06cda19dac6a..f76f6ec01e19 100644 --- a/arch/arm/boot/dts/r8a7778-bockw-reference.dts +++ b/arch/arm/boot/dts/r8a7778-bockw-reference.dts @@ -109,4 +109,18 @@ pinctrl-0 = <&hspi0_pins>; pinctrl-names = "default"; status = "okay"; + + flash: flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25fl008k"; + reg = <0>; + spi-max-frequency = <104000000>; + m25p,fast-read; + + partition@0 { + label = "data(spi)"; + reg = <0x00000000 0x00100000>; + }; + }; }; diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi index 85c5b3b99f5e..3af0a2187493 100644 --- a/arch/arm/boot/dts/r8a7778.dtsi +++ b/arch/arm/boot/dts/r8a7778.dtsi @@ -20,6 +20,7 @@ / { compatible = "renesas,r8a7778"; + interrupt-parent = <&gic>; cpus { cpu@0 { @@ -52,7 +53,6 @@ <0xfe780024 4>, <0xfe780044 4>, <0xfe780064 4>; - interrupt-parent = <&gic>; interrupts = <0 27 IRQ_TYPE_LEVEL_HIGH 0 28 IRQ_TYPE_LEVEL_HIGH 0 29 IRQ_TYPE_LEVEL_HIGH @@ -63,7 +63,6 @@ gpio0: gpio@ffc40000 { compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar"; reg = <0xffc40000 0x2c>; - interrupt-parent = <&gic>; interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; @@ -75,7 +74,6 @@ gpio1: gpio@ffc41000 { compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar"; reg = <0xffc41000 0x2c>; - interrupt-parent = <&gic>; interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; @@ -87,7 +85,6 @@ gpio2: gpio@ffc42000 { compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar"; reg = <0xffc42000 0x2c>; - interrupt-parent = <&gic>; interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; @@ -99,7 +96,6 @@ gpio3: gpio@ffc43000 { compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar"; reg = <0xffc43000 0x2c>; - interrupt-parent = <&gic>; interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; @@ -111,7 +107,6 @@ gpio4: gpio@ffc44000 { compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar"; reg = <0xffc44000 0x2c>; - interrupt-parent = <&gic>; interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; @@ -130,7 +125,6 @@ #size-cells = <0>; compatible = "renesas,i2c-r8a7778"; reg = <0xffc70000 0x1000>; - interrupt-parent = <&gic>; interrupts = <0 67 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -140,7 +134,6 @@ #size-cells = <0>; compatible = "renesas,i2c-r8a7778"; reg = <0xffc71000 0x1000>; - interrupt-parent = <&gic>; interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -150,7 +143,6 @@ #size-cells = <0>; compatible = "renesas,i2c-r8a7778"; reg = <0xffc72000 0x1000>; - interrupt-parent = <&gic>; interrupts = <0 76 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -160,7 +152,6 @@ #size-cells = <0>; compatible = "renesas,i2c-r8a7778"; reg = <0xffc73000 0x1000>; - interrupt-parent = <&gic>; interrupts = <0 77 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -168,7 +159,6 @@ mmcif: mmc@ffe4e000 { compatible = "renesas,sh-mmcif"; reg = <0xffe4e000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 61 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -176,7 +166,6 @@ sdhi0: sd@ffe4c000 { compatible = "renesas,sdhi-r8a7778"; reg = <0xffe4c000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>; cap-sd-highspeed; cap-sdio-irq; @@ -186,7 +175,6 @@ sdhi1: sd@ffe4d000 { compatible = "renesas,sdhi-r8a7778"; reg = <0xffe4d000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH>; cap-sd-highspeed; cap-sdio-irq; @@ -196,7 +184,6 @@ sdhi2: sd@ffe4f000 { compatible = "renesas,sdhi-r8a7778"; reg = <0xffe4f000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>; cap-sd-highspeed; cap-sdio-irq; @@ -204,26 +191,29 @@ }; hspi0: spi@fffc7000 { - compatible = "renesas,hspi"; + compatible = "renesas,hspi-r8a7778", "renesas,hspi"; reg = <0xfffc7000 0x18>; - interrupt-controller = <&gic>; interrupts = <0 63 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; hspi1: spi@fffc8000 { - compatible = "renesas,hspi"; + compatible = "renesas,hspi-r8a7778", "renesas,hspi"; reg = <0xfffc8000 0x18>; - interrupt-controller = <&gic>; interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; hspi2: spi@fffc6000 { - compatible = "renesas,hspi"; + compatible = "renesas,hspi-r8a7778", "renesas,hspi"; reg = <0xfffc6000 0x18>; - interrupt-controller = <&gic>; interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/r8a7779-marzen-reference.dts b/arch/arm/boot/dts/r8a7779-marzen-reference.dts index 76f5eef7d1cc..b27c6373ff4d 100644 --- a/arch/arm/boot/dts/r8a7779-marzen-reference.dts +++ b/arch/arm/boot/dts/r8a7779-marzen-reference.dts @@ -45,6 +45,7 @@ phy-mode = "mii"; interrupt-parent = <&irqpin0>; interrupts = <1 IRQ_TYPE_EDGE_FALLING>; + smsc,irq-push-pull; reg-io-width = <4>; vddvario-supply = <&fixedregulator3v3>; vdd33a-supply = <&fixedregulator3v3>; diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi index d0561d4c7c46..b517c8e6b420 100644 --- a/arch/arm/boot/dts/r8a7779.dtsi +++ b/arch/arm/boot/dts/r8a7779.dtsi @@ -15,6 +15,7 @@ / { compatible = "renesas,r8a7779"; + interrupt-parent = <&gic>; cpus { #address-cells = <1>; @@ -59,7 +60,6 @@ gpio0: gpio@ffc40000 { compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; reg = <0xffc40000 0x2c>; - interrupt-parent = <&gic>; interrupts = <0 141 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; @@ -71,7 +71,6 @@ gpio1: gpio@ffc41000 { compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; reg = <0xffc41000 0x2c>; - interrupt-parent = <&gic>; interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; @@ -83,7 +82,6 @@ gpio2: gpio@ffc42000 { compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; reg = <0xffc42000 0x2c>; - interrupt-parent = <&gic>; interrupts = <0 143 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; @@ -95,7 +93,6 @@ gpio3: gpio@ffc43000 { compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; reg = <0xffc43000 0x2c>; - interrupt-parent = <&gic>; interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; @@ -107,7 +104,6 @@ gpio4: gpio@ffc44000 { compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; reg = <0xffc44000 0x2c>; - interrupt-parent = <&gic>; interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; @@ -119,7 +115,6 @@ gpio5: gpio@ffc45000 { compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; reg = <0xffc45000 0x2c>; - interrupt-parent = <&gic>; interrupts = <0 146 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; @@ -131,7 +126,6 @@ gpio6: gpio@ffc46000 { compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; reg = <0xffc46000 0x2c>; - interrupt-parent = <&gic>; interrupts = <0 147 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; @@ -150,7 +144,6 @@ <0xfe780024 4>, <0xfe780044 4>, <0xfe780064 4>; - interrupt-parent = <&gic>; interrupts = <0 27 IRQ_TYPE_LEVEL_HIGH 0 28 IRQ_TYPE_LEVEL_HIGH 0 29 IRQ_TYPE_LEVEL_HIGH @@ -163,7 +156,6 @@ #size-cells = <0>; compatible = "renesas,i2c-r8a7779"; reg = <0xffc70000 0x1000>; - interrupt-parent = <&gic>; interrupts = <0 79 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -173,7 +165,6 @@ #size-cells = <0>; compatible = "renesas,i2c-r8a7779"; reg = <0xffc71000 0x1000>; - interrupt-parent = <&gic>; interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -183,7 +174,6 @@ #size-cells = <0>; compatible = "renesas,i2c-r8a7779"; reg = <0xffc72000 0x1000>; - interrupt-parent = <&gic>; interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -193,7 +183,6 @@ #size-cells = <0>; compatible = "renesas,i2c-r8a7779"; reg = <0xffc73000 0x1000>; - interrupt-parent = <&gic>; interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -211,14 +200,12 @@ sata: sata@fc600000 { compatible = "renesas,rcar-sata"; reg = <0xfc600000 0x2000>; - interrupt-parent = <&gic>; interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>; }; sdhi0: sd@ffe4c000 { compatible = "renesas,sdhi-r8a7779"; reg = <0xffe4c000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH>; cap-sd-highspeed; cap-sdio-irq; @@ -228,7 +215,6 @@ sdhi1: sd@ffe4d000 { compatible = "renesas,sdhi-r8a7779"; reg = <0xffe4d000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>; cap-sd-highspeed; cap-sdio-irq; @@ -238,7 +224,6 @@ sdhi2: sd@ffe4e000 { compatible = "renesas,sdhi-r8a7779"; reg = <0xffe4e000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>; cap-sd-highspeed; cap-sdio-irq; @@ -248,7 +233,6 @@ sdhi3: sd@ffe4f000 { compatible = "renesas,sdhi-r8a7779"; reg = <0xffe4f000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>; cap-sd-highspeed; cap-sdio-irq; @@ -256,26 +240,29 @@ }; hspi0: spi@fffc7000 { - compatible = "renesas,hspi"; + compatible = "renesas,hspi-r8a7779", "renesas,hspi"; reg = <0xfffc7000 0x18>; - interrupt-controller = <&gic>; interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; hspi1: spi@fffc8000 { - compatible = "renesas,hspi"; + compatible = "renesas,hspi-r8a7779", "renesas,hspi"; reg = <0xfffc8000 0x18>; - interrupt-controller = <&gic>; interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; hspi2: spi@fffc6000 { - compatible = "renesas,hspi"; + compatible = "renesas,hspi-r8a7779", "renesas,hspi"; reg = <0xfffc6000 0x18>; - interrupt-controller = <&gic>; interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts index f5e548735d7a..dd2fe46073f2 100644 --- a/arch/arm/boot/dts/r8a7790-lager.dts +++ b/arch/arm/boot/dts/r8a7790-lager.dts @@ -12,6 +12,7 @@ /dts-v1/; #include "r8a7790.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> / { model = "Lager"; @@ -41,6 +42,39 @@ #size-cells = <1>; }; + gpio_keys { + compatible = "gpio-keys"; + + button@1 { + linux,code = <KEY_1>; + label = "SW2-1"; + gpio-key,wakeup; + debounce-interval = <20>; + gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; + }; + button@2 { + linux,code = <KEY_2>; + label = "SW2-2"; + gpio-key,wakeup; + debounce-interval = <20>; + gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; + }; + button@3 { + linux,code = <KEY_3>; + label = "SW2-3"; + gpio-key,wakeup; + debounce-interval = <20>; + gpios = <&gpio1 26 GPIO_ACTIVE_LOW>; + }; + button@4 { + linux,code = <KEY_4>; + label = "SW2-4"; + gpio-key,wakeup; + debounce-interval = <20>; + gpios = <&gpio1 28 GPIO_ACTIVE_LOW>; + }; + }; + leds { compatible = "gpio-leds"; led6 { @@ -160,10 +194,16 @@ renesas,function = "mmc1"; }; - qspi_pins: spi { + qspi_pins: spi0 { renesas,groups = "qspi_ctrl", "qspi_data4"; renesas,function = "qspi"; }; + + msiof1_pins: spi2 { + renesas,groups = "msiof1_clk", "msiof1_sync", "msiof1_rx", + "msiof1_tx"; + renesas,function = "msiof1"; + }; }; ðer { @@ -178,6 +218,7 @@ reg = <1>; interrupt-parent = <&irqc0>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + micrel,led-mode = <1>; }; }; @@ -195,7 +236,7 @@ status = "okay"; }; -&spi { +&qspi { pinctrl-0 = <&qspi_pins>; pinctrl-names = "default"; @@ -207,6 +248,8 @@ compatible = "spansion,s25fl512s"; reg = <0>; spi-max-frequency = <30000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; m25p,fast-read; partition@0 { @@ -240,6 +283,21 @@ status = "okay"; }; +&msiof1 { + pinctrl-0 = <&msiof1_pins>; + pinctrl-names = "default"; + + status = "okay"; + + pmic: pmic@0 { + compatible = "renesas,r2a11302ft"; + reg = <0>; + spi-max-frequency = <6000000>; + spi-cpol; + spi-cpha; + }; +}; + &sdhi0 { pinctrl-0 = <&sdhi0_pins>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index 10b326bdf831..7ff29601f962 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -24,6 +24,15 @@ i2c1 = &i2c1; i2c2 = &i2c2; i2c3 = &i2c3; + i2c4 = &iic0; + i2c5 = &iic1; + i2c6 = &iic2; + i2c7 = &iic3; + spi0 = &qspi; + spi1 = &msiof0; + spi2 = &msiof1; + spi3 = &msiof2; + spi4 = &msiof3; }; cpus { @@ -108,6 +117,7 @@ gpio-ranges = <&pfc 0 0 32>; #interrupt-cells = <2>; interrupt-controller; + clocks = <&mstp9_clks R8A7790_CLK_GPIO0>; }; gpio1: gpio@e6051000 { @@ -119,6 +129,7 @@ gpio-ranges = <&pfc 0 32 32>; #interrupt-cells = <2>; interrupt-controller; + clocks = <&mstp9_clks R8A7790_CLK_GPIO1>; }; gpio2: gpio@e6052000 { @@ -130,6 +141,7 @@ gpio-ranges = <&pfc 0 64 32>; #interrupt-cells = <2>; interrupt-controller; + clocks = <&mstp9_clks R8A7790_CLK_GPIO2>; }; gpio3: gpio@e6053000 { @@ -141,6 +153,7 @@ gpio-ranges = <&pfc 0 96 32>; #interrupt-cells = <2>; interrupt-controller; + clocks = <&mstp9_clks R8A7790_CLK_GPIO3>; }; gpio4: gpio@e6054000 { @@ -152,6 +165,7 @@ gpio-ranges = <&pfc 0 128 32>; #interrupt-cells = <2>; interrupt-controller; + clocks = <&mstp9_clks R8A7790_CLK_GPIO4>; }; gpio5: gpio@e6055000 { @@ -163,6 +177,7 @@ gpio-ranges = <&pfc 0 160 32>; #interrupt-cells = <2>; interrupt-controller; + clocks = <&mstp9_clks R8A7790_CLK_GPIO5>; }; thermal@e61f0000 { @@ -231,6 +246,46 @@ status = "disabled"; }; + iic0: i2c@e6500000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a7790", "renesas,rmobile-iic"; + reg = <0 0xe6500000 0 0x425>; + interrupts = <0 174 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7790_CLK_IIC0>; + status = "disabled"; + }; + + iic1: i2c@e6510000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a7790", "renesas,rmobile-iic"; + reg = <0 0xe6510000 0 0x425>; + interrupts = <0 175 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7790_CLK_IIC1>; + status = "disabled"; + }; + + iic2: i2c@e6520000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a7790", "renesas,rmobile-iic"; + reg = <0 0xe6520000 0 0x425>; + interrupts = <0 176 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7790_CLK_IIC2>; + status = "disabled"; + }; + + iic3: i2c@e60b0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a7790", "renesas,rmobile-iic"; + reg = <0 0xe60b0000 0 0x425>; + interrupts = <0 173 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp9_clks R8A7790_CLK_IICDVFS>; + status = "disabled"; + }; + mmcif0: mmcif@ee200000 { compatible = "renesas,mmcif-r8a7790", "renesas,sh-mmcif"; reg = <0 0xee200000 0 0x80>; @@ -697,18 +752,19 @@ mstp3_clks: mstp3_clks@e615013c { compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>; - clocks = <&cp_clk>, <&mmc1_clk>, <&sd3_clk>, <&sd2_clk>, - <&cpg_clocks R8A7790_CLK_SD1>, <&cpg_clocks R8A7790_CLK_SD0>, - <&mmc0_clk>, <&rclk_clk>; + clocks = <&hp_clk>, <&cp_clk>, <&mmc1_clk>, <&sd3_clk>, + <&sd2_clk>, <&cpg_clocks R8A7790_CLK_SD1>, <&cpg_clocks R8A7790_CLK_SD0>, <&mmc0_clk>, + <&hp_clk>, <&hp_clk>, <&rclk_clk>; #clock-cells = <1>; renesas,clock-indices = < - R8A7790_CLK_TPU0 R8A7790_CLK_MMCIF1 R8A7790_CLK_SDHI3 - R8A7790_CLK_SDHI2 R8A7790_CLK_SDHI1 R8A7790_CLK_SDHI0 - R8A7790_CLK_MMCIF0 R8A7790_CLK_CMT1 + R8A7790_CLK_IIC2 R8A7790_CLK_TPU0 R8A7790_CLK_MMCIF1 R8A7790_CLK_SDHI3 + R8A7790_CLK_SDHI2 R8A7790_CLK_SDHI1 R8A7790_CLK_SDHI0 R8A7790_CLK_MMCIF0 + R8A7790_CLK_IIC0 R8A7790_CLK_IIC1 R8A7790_CLK_CMT1 >; clock-output-names = - "tpu0", "mmcif1", "sdhi3", "sdhi2", - "sdhi1", "sdhi0", "mmcif0", "cmt1"; + "iic2", "tpu0", "mmcif1", "sdhi3", + "sdhi2", "sdhi1", "sdhi0", "mmcif0", + "iic0", "iic1", "cmt1"; }; mstp5_clks: mstp5_clks@e6150144 { compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; @@ -752,20 +808,25 @@ mstp9_clks: mstp9_clks@e6150994 { compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe6150994 0 4>, <0 0xe61509a4 0 4>; - clocks = <&p_clk>, <&p_clk>, <&cpg_clocks R8A7790_CLK_QSPI>, - <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>; + clocks = <&cp_clk>, <&cp_clk>, <&cp_clk>, + <&cp_clk>, <&cp_clk>, <&cp_clk>, + <&p_clk>, <&p_clk>, <&cpg_clocks R8A7790_CLK_QSPI>, <&cp_clk>, + <&hp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>; #clock-cells = <1>; renesas,clock-indices = < - R8A7790_CLK_RCAN1 R8A7790_CLK_RCAN0 R8A7790_CLK_QSPI_MOD - R8A7790_CLK_I2C3 R8A7790_CLK_I2C2 R8A7790_CLK_I2C1 - R8A7790_CLK_I2C0 + R8A7790_CLK_GPIO5 R8A7790_CLK_GPIO4 R8A7790_CLK_GPIO3 + R8A7790_CLK_GPIO2 R8A7790_CLK_GPIO1 R8A7790_CLK_GPIO0 + R8A7790_CLK_RCAN1 R8A7790_CLK_RCAN0 R8A7790_CLK_QSPI_MOD R8A7790_CLK_IICDVFS + R8A7790_CLK_I2C3 R8A7790_CLK_I2C2 R8A7790_CLK_I2C1 R8A7790_CLK_I2C0 >; clock-output-names = - "rcan1", "rcan0", "qspi_mod", "i2c3", "i2c2", "i2c1", "i2c0"; + "gpio5", "gpio4", "gpio3", "gpio2", "gpio1", "gpio0", + "rcan1", "rcan0", "qspi_mod", "iic3", + "i2c3", "i2c2", "i2c1", "i2c0"; }; }; - spi: spi@e6b10000 { + qspi: spi@e6b10000 { compatible = "renesas,qspi-r8a7790", "renesas,qspi"; reg = <0 0xe6b10000 0 0x2c>; interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>; @@ -775,4 +836,44 @@ #size-cells = <0>; status = "disabled"; }; + + msiof0: spi@e6e20000 { + compatible = "renesas,msiof-r8a7790"; + reg = <0 0xe6e20000 0 0x0064>; + interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7790_CLK_MSIOF0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof1: spi@e6e10000 { + compatible = "renesas,msiof-r8a7790"; + reg = <0 0xe6e10000 0 0x0064>; + interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp2_clks R8A7790_CLK_MSIOF1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof2: spi@e6e00000 { + compatible = "renesas,msiof-r8a7790"; + reg = <0 0xe6e00000 0 0x0064>; + interrupts = <0 158 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp2_clks R8A7790_CLK_MSIOF2>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof3: spi@e6c90000 { + compatible = "renesas,msiof-r8a7790"; + reg = <0 0xe6c90000 0 0x0064>; + interrupts = <0 159 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp2_clks R8A7790_CLK_MSIOF3>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; }; diff --git a/arch/arm/boot/dts/r8a7791-henninger.dts b/arch/arm/boot/dts/r8a7791-henninger.dts new file mode 100644 index 000000000000..cc6d992e8db2 --- /dev/null +++ b/arch/arm/boot/dts/r8a7791-henninger.dts @@ -0,0 +1,219 @@ +/* + * Device Tree Source for the Henninger board + * + * Copyright (C) 2014 Renesas Solutions Corp. + * Copyright (C) 2014 Cogent Embedded, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/dts-v1/; +#include "r8a7791.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Henninger"; + compatible = "renesas,henninger", "renesas,r8a7791"; + + aliases { + serial0 = &scif0; + }; + + chosen { + bootargs = "console=ttySC0,38400 ignore_loglevel rw root=/dev/nfs ip=dhcp"; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0 0x40000000 0 0x40000000>; + }; + + memory@200000000 { + device_type = "memory"; + reg = <2 0x00000000 0 0x40000000>; + }; + + vcc_sdhi0: regulator@0 { + compatible = "regulator-fixed"; + + regulator-name = "SDHI0 Vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vccq_sdhi0: regulator@1 { + compatible = "regulator-gpio"; + + regulator-name = "SDHI0 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>; + gpios-states = <1>; + states = <3300000 1 + 1800000 0>; + }; + + vcc_sdhi2: regulator@2 { + compatible = "regulator-fixed"; + + regulator-name = "SDHI2 Vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vccq_sdhi2: regulator@3 { + compatible = "regulator-gpio"; + + regulator-name = "SDHI2 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>; + gpios-states = <1>; + states = <3300000 1 + 1800000 0>; + }; +}; + +&extal_clk { + clock-frequency = <20000000>; +}; + +&pfc { + scif0_pins: serial0 { + renesas,groups = "scif0_data_d"; + renesas,function = "scif0"; + }; + + ether_pins: ether { + renesas,groups = "eth_link", "eth_mdio", "eth_rmii"; + renesas,function = "eth"; + }; + + phy1_pins: phy1 { + renesas,groups = "intc_irq0"; + renesas,function = "intc"; + }; + + sdhi0_pins: sd0 { + renesas,groups = "sdhi0_data4", "sdhi0_ctrl"; + renesas,function = "sdhi0"; + }; + + sdhi2_pins: sd2 { + renesas,groups = "sdhi2_data4", "sdhi2_ctrl"; + renesas,function = "sdhi2"; + }; + + qspi_pins: spi0 { + renesas,groups = "qspi_ctrl", "qspi_data4"; + renesas,function = "qspi"; + }; + + msiof0_pins: spi1 { + renesas,groups = "msiof0_clk", "msiof0_sync", "msiof0_rx", + "msiof0_tx"; + renesas,function = "msiof0"; + }; +}; + +&scif0 { + pinctrl-0 = <&scif0_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +ðer { + pinctrl-0 = <ðer_pins &phy1_pins>; + pinctrl-names = "default"; + + phy-handle = <&phy1>; + renesas,ether-link-active-low; + status = "ok"; + + phy1: ethernet-phy@1 { + reg = <1>; + interrupt-parent = <&irqc0>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + micrel,led-mode = <1>; + }; +}; + +&sata0 { + status = "okay"; +}; + +&sdhi0 { + pinctrl-0 = <&sdhi0_pins>; + pinctrl-names = "default"; + + vmmc-supply = <&vcc_sdhi0>; + vqmmc-supply = <&vccq_sdhi0>; + cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&sdhi2 { + pinctrl-0 = <&sdhi2_pins>; + pinctrl-names = "default"; + + vmmc-supply = <&vcc_sdhi2>; + vqmmc-supply = <&vccq_sdhi2>; + cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&qspi { + pinctrl-0 = <&qspi_pins>; + pinctrl-names = "default"; + + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25fl512s"; + reg = <0>; + spi-max-frequency = <30000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + m25p,fast-read; + + partition@0 { + label = "loader_prg"; + reg = <0x00000000 0x00040000>; + read-only; + }; + partition@40000 { + label = "user_prg"; + reg = <0x00040000 0x00400000>; + read-only; + }; + partition@440000 { + label = "flash_fs"; + reg = <0x00440000 0x03bc0000>; + }; + }; +}; + +&msiof0 { + pinctrl-0 = <&msiof0_pins>; + pinctrl-names = "default"; + + status = "okay"; + + pmic@0 { + compatible = "renesas,r2a11302ft"; + reg = <0>; + spi-max-frequency = <6000000>; + spi-cpol; + spi-cpha; + }; +}; diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index 277385dfe99a..05d44f9b202f 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -13,6 +13,7 @@ /dts-v1/; #include "r8a7791.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> / { model = "Koelsch"; @@ -45,51 +46,79 @@ gpio-keys { compatible = "gpio-keys"; + key-1 { + gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; + linux,code = <KEY_1>; + label = "SW2-1"; + gpio-key,wakeup; + debounce-interval = <20>; + }; + key-2 { + gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; + linux,code = <KEY_2>; + label = "SW2-2"; + gpio-key,wakeup; + debounce-interval = <20>; + }; + key-3 { + gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; + linux,code = <KEY_3>; + label = "SW2-3"; + gpio-key,wakeup; + debounce-interval = <20>; + }; + key-4 { + gpios = <&gpio5 3 GPIO_ACTIVE_LOW>; + linux,code = <KEY_4>; + label = "SW2-4"; + gpio-key,wakeup; + debounce-interval = <20>; + }; key-a { gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; - linux,code = <30>; + linux,code = <KEY_A>; label = "SW30"; gpio-key,wakeup; debounce-interval = <20>; }; key-b { gpios = <&gpio7 1 GPIO_ACTIVE_LOW>; - linux,code = <48>; + linux,code = <KEY_B>; label = "SW31"; gpio-key,wakeup; debounce-interval = <20>; }; key-c { gpios = <&gpio7 2 GPIO_ACTIVE_LOW>; - linux,code = <46>; + linux,code = <KEY_C>; label = "SW32"; gpio-key,wakeup; debounce-interval = <20>; }; key-d { gpios = <&gpio7 3 GPIO_ACTIVE_LOW>; - linux,code = <32>; + linux,code = <KEY_D>; label = "SW33"; gpio-key,wakeup; debounce-interval = <20>; }; key-e { gpios = <&gpio7 4 GPIO_ACTIVE_LOW>; - linux,code = <18>; + linux,code = <KEY_E>; label = "SW34"; gpio-key,wakeup; debounce-interval = <20>; }; key-f { gpios = <&gpio7 5 GPIO_ACTIVE_LOW>; - linux,code = <33>; + linux,code = <KEY_F>; label = "SW35"; gpio-key,wakeup; debounce-interval = <20>; }; key-g { gpios = <&gpio7 6 GPIO_ACTIVE_LOW>; - linux,code = <34>; + linux,code = <KEY_G>; label = "SW36"; gpio-key,wakeup; debounce-interval = <20>; @@ -200,11 +229,16 @@ }; }; +&i2c6 { + status = "okay"; + clock-frequency = <100000>; +}; + &pfc { pinctrl-0 = <&du_pins>; pinctrl-names = "default"; - i2c2_pins: i2c { + i2c2_pins: i2c2 { renesas,groups = "i2c2"; renesas,function = "i2c2"; }; @@ -249,10 +283,16 @@ renesas,function = "sdhi2"; }; - qspi_pins: spi { + qspi_pins: spi0 { renesas,groups = "qspi_ctrl", "qspi_data4"; renesas,function = "qspi"; }; + + msiof0_pins: spi1 { + renesas,groups = "msiof0_clk", "msiof0_sync", "msiof0_rx", + "msiof0_tx"; + renesas,function = "msiof0"; + }; }; ðer { @@ -267,6 +307,7 @@ reg = <1>; interrupt-parent = <&irqc0>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + micrel,led-mode = <1>; }; }; @@ -320,7 +361,7 @@ status = "okay"; }; -&spi { +&qspi { pinctrl-0 = <&qspi_pins>; pinctrl-names = "default"; @@ -332,6 +373,8 @@ compatible = "spansion,s25fl512s"; reg = <0>; spi-max-frequency = <30000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; m25p,fast-read; partition@0 { @@ -350,3 +393,18 @@ }; }; }; + +&msiof0 { + pinctrl-0 = <&msiof0_pins>; + pinctrl-names = "default"; + + status = "okay"; + + pmic: pmic@0 { + compatible = "renesas,r2a11302ft"; + reg = <0>; + spi-max-frequency = <6000000>; + spi-cpol; + spi-cpha; + }; +}; diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index aa1cba94196c..8d7ffaeff6e0 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -27,6 +27,13 @@ i2c3 = &i2c3; i2c4 = &i2c4; i2c5 = &i2c5; + i2c6 = &i2c6; + i2c7 = &i2c7; + i2c8 = &i2c8; + spi0 = &qspi; + spi1 = &msiof0; + spi2 = &msiof1; + spi3 = &msiof2; }; cpus { @@ -37,14 +44,14 @@ device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0>; - clock-frequency = <1300000000>; + clock-frequency = <1500000000>; }; cpu1: cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <1>; - clock-frequency = <1300000000>; + clock-frequency = <1500000000>; }; }; @@ -69,6 +76,7 @@ gpio-ranges = <&pfc 0 0 32>; #interrupt-cells = <2>; interrupt-controller; + clocks = <&mstp9_clks R8A7791_CLK_GPIO0>; }; gpio1: gpio@e6051000 { @@ -80,6 +88,7 @@ gpio-ranges = <&pfc 0 32 32>; #interrupt-cells = <2>; interrupt-controller; + clocks = <&mstp9_clks R8A7791_CLK_GPIO1>; }; gpio2: gpio@e6052000 { @@ -91,6 +100,7 @@ gpio-ranges = <&pfc 0 64 32>; #interrupt-cells = <2>; interrupt-controller; + clocks = <&mstp9_clks R8A7791_CLK_GPIO2>; }; gpio3: gpio@e6053000 { @@ -102,6 +112,7 @@ gpio-ranges = <&pfc 0 96 32>; #interrupt-cells = <2>; interrupt-controller; + clocks = <&mstp9_clks R8A7791_CLK_GPIO3>; }; gpio4: gpio@e6054000 { @@ -113,6 +124,7 @@ gpio-ranges = <&pfc 0 128 32>; #interrupt-cells = <2>; interrupt-controller; + clocks = <&mstp9_clks R8A7791_CLK_GPIO4>; }; gpio5: gpio@e6055000 { @@ -124,6 +136,7 @@ gpio-ranges = <&pfc 0 160 32>; #interrupt-cells = <2>; interrupt-controller; + clocks = <&mstp9_clks R8A7791_CLK_GPIO5>; }; gpio6: gpio@e6055400 { @@ -135,6 +148,7 @@ gpio-ranges = <&pfc 0 192 32>; #interrupt-cells = <2>; interrupt-controller; + clocks = <&mstp9_clks R8A7791_CLK_GPIO6>; }; gpio7: gpio@e6055800 { @@ -146,6 +160,7 @@ gpio-ranges = <&pfc 0 224 26>; #interrupt-cells = <2>; interrupt-controller; + clocks = <&mstp9_clks R8A7791_CLK_GPIO7>; }; thermal@e61f0000 { @@ -180,6 +195,7 @@ <0 17 IRQ_TYPE_LEVEL_HIGH>; }; + /* The memory map in the User's Manual maps the cores to bus numbers */ i2c0: i2c@e6508000 { #address-cells = <1>; #size-cells = <0>; @@ -231,6 +247,7 @@ }; i2c5: i2c@e6528000 { + /* doesn't need pinmux */ #address-cells = <1>; #size-cells = <0>; compatible = "renesas,i2c-r8a7791"; @@ -240,6 +257,37 @@ status = "disabled"; }; + i2c6: i2c@e60b0000 { + /* doesn't need pinmux */ + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a7791", "renesas,rmobile-iic"; + reg = <0 0xe60b0000 0 0x425>; + interrupts = <0 173 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp9_clks R8A7791_CLK_IICDVFS>; + status = "disabled"; + }; + + i2c7: i2c@e6500000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a7791", "renesas,rmobile-iic"; + reg = <0 0xe6500000 0 0x425>; + interrupts = <0 174 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7791_CLK_IIC0>; + status = "disabled"; + }; + + i2c8: i2c@e6510000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a7791", "renesas,rmobile-iic"; + reg = <0 0xe6510000 0 0x425>; + interrupts = <0 175 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7791_CLK_IIC1>; + status = "disabled"; + }; + pfc: pfc@e6060000 { compatible = "renesas,pfc-r8a7791"; reg = <0 0xe6060000 0 0x250>; @@ -249,7 +297,6 @@ sdhi0: sd@ee100000 { compatible = "renesas,sdhi-r8a7791"; reg = <0 0xee100000 0 0x200>; - interrupt-parent = <&gic>; interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7791_CLK_SDHI0>; status = "disabled"; @@ -258,7 +305,6 @@ sdhi1: sd@ee140000 { compatible = "renesas,sdhi-r8a7791"; reg = <0 0xee140000 0 0x100>; - interrupt-parent = <&gic>; interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7791_CLK_SDHI1>; status = "disabled"; @@ -267,7 +313,6 @@ sdhi2: sd@ee160000 { compatible = "renesas,sdhi-r8a7791"; reg = <0 0xee160000 0 0x100>; - interrupt-parent = <&gic>; interrupts = <0 168 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7791_CLK_SDHI2>; status = "disabled"; @@ -712,15 +757,16 @@ mstp3_clks: mstp3_clks@e615013c { compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>; - clocks = <&cp_clk>, <&sd2_clk>, <&sd1_clk>, - <&cpg_clocks R8A7791_CLK_SD0>, <&mmc0_clk>, <&rclk_clk>; + clocks = <&cp_clk>, <&sd2_clk>, <&sd1_clk>, <&cpg_clocks R8A7791_CLK_SD0>, + <&mmc0_clk>, <&hp_clk>, <&hp_clk>, <&rclk_clk>; #clock-cells = <1>; renesas,clock-indices = < - R8A7791_CLK_TPU0 R8A7791_CLK_SDHI2 R8A7791_CLK_SDHI1 - R8A7791_CLK_SDHI0 R8A7791_CLK_MMCIF0 R8A7791_CLK_CMT1 + R8A7791_CLK_TPU0 R8A7791_CLK_SDHI2 R8A7791_CLK_SDHI1 R8A7791_CLK_SDHI0 + R8A7791_CLK_MMCIF0 R8A7791_CLK_IIC0 R8A7791_CLK_IIC1 R8A7791_CLK_CMT1 >; clock-output-names = - "tpu0", "sdhi2", "sdhi1", "sdhi0", "mmcif0", "cmt1"; + "tpu0", "sdhi2", "sdhi1", "sdhi0", + "mmcif0", "i2c7", "i2c8", "cmt1"; }; mstp5_clks: mstp5_clks@e6150144 { compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; @@ -733,19 +779,19 @@ mstp7_clks: mstp7_clks@e615014c { compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe615014c 0 4>, <0 0xe61501c4 0 4>; - clocks = <&mp_clk>, <&zs_clk>, <&p_clk>, <&p_clk>, <&zs_clk>, + clocks = <&mp_clk>, <&mp_clk>, <&zs_clk>, <&p_clk>, <&p_clk>, <&zs_clk>, <&zs_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&zx_clk>, <&zx_clk>, <&zx_clk>; #clock-cells = <1>; renesas,clock-indices = < - R8A7791_CLK_HSUSB R8A7791_CLK_HSCIF2 R8A7791_CLK_SCIF5 + R8A7791_CLK_EHCI R8A7791_CLK_HSUSB R8A7791_CLK_HSCIF2 R8A7791_CLK_SCIF5 R8A7791_CLK_SCIF4 R8A7791_CLK_HSCIF1 R8A7791_CLK_HSCIF0 R8A7791_CLK_SCIF3 R8A7791_CLK_SCIF2 R8A7791_CLK_SCIF1 R8A7791_CLK_SCIF0 R8A7791_CLK_DU1 R8A7791_CLK_DU0 R8A7791_CLK_LVDS0 >; clock-output-names = - "hsusb", "hscif2", "scif5", "scif4", "hscif1", "hscif0", + "ehci", "hsusb", "hscif2", "scif5", "scif4", "hscif1", "hscif0", "scif3", "scif2", "scif1", "scif0", "du1", "du0", "lvds0"; }; mstp8_clks: mstp8_clks@e6150990 { @@ -764,18 +810,23 @@ mstp9_clks: mstp9_clks@e6150994 { compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe6150994 0 4>, <0 0xe61509a4 0 4>; - clocks = <&p_clk>, <&p_clk>, <&cpg_clocks R8A7791_CLK_QSPI>, - <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, - <&p_clk>; + clocks = <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>, + <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>, + <&p_clk>, <&p_clk>, <&cpg_clocks R8A7791_CLK_QSPI>, <&hp_clk>, + <&cp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>, + <&hp_clk>, <&hp_clk>; #clock-cells = <1>; renesas,clock-indices = < - R8A7791_CLK_RCAN1 R8A7791_CLK_RCAN0 R8A7791_CLK_QSPI_MOD - R8A7791_CLK_I2C5 R8A7791_CLK_I2C4 R8A7791_CLK_I2C3 - R8A7791_CLK_I2C2 R8A7791_CLK_I2C1 R8A7791_CLK_I2C0 + R8A7791_CLK_GPIO7 R8A7791_CLK_GPIO6 R8A7791_CLK_GPIO5 R8A7791_CLK_GPIO4 + R8A7791_CLK_GPIO3 R8A7791_CLK_GPIO2 R8A7791_CLK_GPIO1 R8A7791_CLK_GPIO0 + R8A7791_CLK_RCAN1 R8A7791_CLK_RCAN0 R8A7791_CLK_QSPI_MOD R8A7791_CLK_I2C5 + R8A7791_CLK_IICDVFS R8A7791_CLK_I2C4 R8A7791_CLK_I2C3 R8A7791_CLK_I2C2 + R8A7791_CLK_I2C1 R8A7791_CLK_I2C0 >; clock-output-names = - "rcan1", "rcan0", "qspi_mod", "i2c5", "i2c4", "i2c3", - "i2c2", "i2c1", "i2c0"; + "gpio7", "gpio6", "gpio5", "gpio4", "gpio3", "gpio2", "gpio1", "gpio0", + "rcan1", "rcan0", "qspi_mod", "i2c5", "i2c6", "i2c4", "i2c3", "i2c2", + "i2c1", "i2c0"; }; mstp11_clks: mstp11_clks@e615099c { compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; @@ -789,7 +840,7 @@ }; }; - spi: spi@e6b10000 { + qspi: spi@e6b10000 { compatible = "renesas,qspi-r8a7791", "renesas,qspi"; reg = <0 0xe6b10000 0 0x2c>; interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>; @@ -799,4 +850,34 @@ #size-cells = <0>; status = "disabled"; }; + + msiof0: spi@e6e20000 { + compatible = "renesas,msiof-r8a7791"; + reg = <0 0xe6e20000 0 0x0064>; + interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7791_CLK_MSIOF0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof1: spi@e6e10000 { + compatible = "renesas,msiof-r8a7791"; + reg = <0 0xe6e10000 0 0x0064>; + interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp2_clks R8A7791_CLK_MSIOF1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof2: spi@e6e00000 { + compatible = "renesas,msiof-r8a7791"; + reg = <0 0xe6e00000 0 0x0064>; + interrupts = <0 158 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp2_clks R8A7791_CLK_MSIOF2>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; }; diff --git a/arch/arm/boot/dts/rk3066a-bqcurie2.dts b/arch/arm/boot/dts/rk3066a-bqcurie2.dts index 035df4053c21..afb327322a4a 100644 --- a/arch/arm/boot/dts/rk3066a-bqcurie2.dts +++ b/arch/arm/boot/dts/rk3066a-bqcurie2.dts @@ -18,6 +18,7 @@ / { model = "bq Curie 2"; + compatible = "mundoreader,bq-curie2", "rockchip,rk3066a"; memory { reg = <0x60000000 0x40000000>; diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi index 90b354db16a0..4387cfd420ba 100644 --- a/arch/arm/boot/dts/rk3066a.dtsi +++ b/arch/arm/boot/dts/rk3066a.dtsi @@ -80,7 +80,7 @@ pinctrl@20008000 { compatible = "rockchip,rk3066a-pinctrl"; - reg = <0x20008000 0x150>; + rockchip,grf = <&grf>; #address-cells = <1>; #size-cells = <1>; ranges; diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts index 3ba1968a70ab..a5eee55079cb 100644 --- a/arch/arm/boot/dts/rk3188-radxarock.dts +++ b/arch/arm/boot/dts/rk3188-radxarock.dts @@ -17,6 +17,7 @@ / { model = "Radxa Rock"; + compatible = "radxa,rock", "rockchip,rk3188"; memory { reg = <0x60000000 0x80000000>; diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi index 2b494ceef6fc..238c996d4a7f 100644 --- a/arch/arm/boot/dts/rk3188.dtsi +++ b/arch/arm/boot/dts/rk3188.dtsi @@ -76,17 +76,16 @@ pinctrl@20008000 { compatible = "rockchip,rk3188-pinctrl"; - reg = <0x20008000 0xa0>, - <0x20008164 0x1a0>; - reg-names = "base", "pull"; + rockchip,grf = <&grf>; + rockchip,pmu = <&pmu>; + #address-cells = <1>; #size-cells = <1>; ranges; gpio0: gpio0@0x2000a000 { compatible = "rockchip,rk3188-gpio-bank0"; - reg = <0x2000a000 0x100>, - <0x20004064 0x8>; + reg = <0x2000a000 0x100>; interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk_gates8 9>; diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi index 26e5a968d49d..2adf1cc9e85d 100644 --- a/arch/arm/boot/dts/rk3xxx.dtsi +++ b/arch/arm/boot/dts/rk3xxx.dtsi @@ -31,11 +31,16 @@ reg = <0x1013c000 0x100>; }; - pmu@20004000 { - compatible = "rockchip,rk3066-pmu"; + pmu: pmu@20004000 { + compatible = "rockchip,rk3066-pmu", "syscon"; reg = <0x20004000 0x100>; }; + grf: grf@20008000 { + compatible = "syscon"; + reg = <0x20008000 0x200>; + }; + gic: interrupt-controller@1013d000 { compatible = "arm,cortex-a9-gic"; interrupt-controller; diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index 3f260b9cd51f..e0b15a6e8897 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -125,6 +125,9 @@ compatible = "atmel,at91sam9g45-ssc"; reg = <0xf0008000 0x4000>; interrupts = <38 IRQ_TYPE_LEVEL_HIGH 4>; + dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(13)>, + <&dma0 2 AT91_DMA_CFG_PER_ID(14)>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; clocks = <&ssc0_clk>; @@ -243,6 +246,9 @@ compatible = "atmel,at91sam9g45-ssc"; reg = <0xf800c000 0x4000>; interrupts = <39 IRQ_TYPE_LEVEL_HIGH 4>; + dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(3)>, + <&dma1 2 AT91_DMA_CFG_PER_ID(4)>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>; clocks = <&ssc1_clk>; @@ -589,6 +595,84 @@ }; }; + pwm0 { + pinctrl_pwm0_pwmh0_0: pwm0_pwmh0-0 { + atmel,pins = + <AT91_PIOA 20 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with ISI_D4 and LCDDAT20 */ + }; + pinctrl_pwm0_pwmh0_1: pwm0_pwmh0-1 { + atmel,pins = + <AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with GTX0 */ + }; + pinctrl_pwm0_pwml0_0: pwm0_pwml0-0 { + atmel,pins = + <AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with ISI_D5 and LCDDAT21 */ + }; + pinctrl_pwm0_pwml0_1: pwm0_pwml0-1 { + atmel,pins = + <AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with GTX1 */ + }; + + pinctrl_pwm0_pwmh1_0: pwm0_pwmh1-0 { + atmel,pins = + <AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with ISI_D6 and LCDDAT22 */ + }; + pinctrl_pwm0_pwmh1_1: pwm0_pwmh1-1 { + atmel,pins = + <AT91_PIOB 4 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with GRX0 */ + }; + pinctrl_pwm0_pwmh1_2: pwm0_pwmh1-2 { + atmel,pins = + <AT91_PIOB 27 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* conflicts with G125CKO and RTS1 */ + }; + pinctrl_pwm0_pwml1_0: pwm0_pwml1-0 { + atmel,pins = + <AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with ISI_D7 and LCDDAT23 */ + }; + pinctrl_pwm0_pwml1_1: pwm0_pwml1-1 { + atmel,pins = + <AT91_PIOB 5 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with GRX1 */ + }; + pinctrl_pwm0_pwml1_2: pwm0_pwml1-2 { + atmel,pins = + <AT91_PIOE 31 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with IRQ */ + }; + + pinctrl_pwm0_pwmh2_0: pwm0_pwmh2-0 { + atmel,pins = + <AT91_PIOB 8 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with GTXCK */ + }; + pinctrl_pwm0_pwmh2_1: pwm0_pwmh2-1 { + atmel,pins = + <AT91_PIOD 5 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* conflicts with MCI0_DA4 and TIOA0 */ + }; + pinctrl_pwm0_pwml2_0: pwm0_pwml2-0 { + atmel,pins = + <AT91_PIOB 9 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with GTXEN */ + }; + pinctrl_pwm0_pwml2_1: pwm0_pwml2-1 { + atmel,pins = + <AT91_PIOD 6 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* conflicts with MCI0_DA5 and TIOB0 */ + }; + + pinctrl_pwm0_pwmh3_0: pwm0_pwmh3-0 { + atmel,pins = + <AT91_PIOB 12 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with GRXDV */ + }; + pinctrl_pwm0_pwmh3_1: pwm0_pwmh3-1 { + atmel,pins = + <AT91_PIOD 7 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* conflicts with MCI0_DA6 and TCLK0 */ + }; + pinctrl_pwm0_pwml3_0: pwm0_pwml3-0 { + atmel,pins = + <AT91_PIOB 13 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with GRXER */ + }; + pinctrl_pwm0_pwml3_1: pwm0_pwml3-1 { + atmel,pins = + <AT91_PIOD 8 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* conflicts with MCI0_DA7 */ + }; + }; + spi0 { pinctrl_spi0: spi0-0 { atmel,pins = diff --git a/arch/arm/boot/dts/sama5d3xmb.dtsi b/arch/arm/boot/dts/sama5d3xmb.dtsi index dba739b6ef36..306eef0f97ef 100644 --- a/arch/arm/boot/dts/sama5d3xmb.dtsi +++ b/arch/arm/boot/dts/sama5d3xmb.dtsi @@ -32,6 +32,10 @@ }; }; + ssc0: ssc@f0008000 { + atmel,clk-from-rk-pin; + }; + /* * i2c0 conflicts with ISI: * disable it to allow the use of ISI @@ -156,7 +160,7 @@ }; sound { - compatible = "atmel,sama5d3ek-wm8904"; + compatible = "atmel,asoc-wm8904"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pck0_as_audio_mck>; @@ -166,9 +170,12 @@ "Headphone Jack", "HPOUTR", "IN2L", "Line In Jack", "IN2R", "Line In Jack", + "MICBIAS", "IN1L", "IN1L", "Mic"; atmel,ssc-controller = <&ssc0>; atmel,audio-codec = <&wm8904>; + + status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts index eb8886b535e4..a99171c8a782 100644 --- a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts +++ b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts @@ -14,6 +14,7 @@ /dts-v1/; #include "sh73a0.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/irq.h> / { @@ -112,43 +113,43 @@ back-key { gpios = <&pcf8575 8 GPIO_ACTIVE_LOW>; - linux,code = <158>; + linux,code = <KEY_BACK>; label = "SW3"; }; right-key { gpios = <&pcf8575 9 GPIO_ACTIVE_LOW>; - linux,code = <106>; + linux,code = <KEY_RIGHT>; label = "SW2-R"; }; left-key { gpios = <&pcf8575 10 GPIO_ACTIVE_LOW>; - linux,code = <105>; + linux,code = <KEY_LEFT>; label = "SW2-L"; }; enter-key { gpios = <&pcf8575 11 GPIO_ACTIVE_LOW>; - linux,code = <28>; + linux,code = <KEY_ENTER>; label = "SW2-P"; }; up-key { gpios = <&pcf8575 12 GPIO_ACTIVE_LOW>; - linux,code = <103>; + linux,code = <KEY_UP>; label = "SW2-U"; }; down-key { gpios = <&pcf8575 13 GPIO_ACTIVE_LOW>; - linux,code = <108>; + linux,code = <KEY_DOWN>; label = "SW2-D"; }; home-key { gpios = <&pcf8575 14 GPIO_ACTIVE_LOW>; - linux,code = <102>; + linux,code = <KEY_HOME>; label = "SW1"; }; }; diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi index 56fc214e6d2c..4676f25e87a7 100644 --- a/arch/arm/boot/dts/socfpga.dtsi +++ b/arch/arm/boot/dts/socfpga.dtsi @@ -15,7 +15,8 @@ * along with this program. If not, see <http://www.gnu.org/licenses/>. */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" +#include <dt-bindings/reset/altr,rst-mgr.h> / { #address-cells = <1>; @@ -75,7 +76,14 @@ pdma: pdma@ffe01000 { compatible = "arm,pl330", "arm,primecell"; reg = <0xffe01000 0x1000>; - interrupts = <0 180 4>; + interrupts = <0 104 4>, + <0 105 4>, + <0 106 4>, + <0 107 4>, + <0 108 4>, + <0 109 4>, + <0 110 4>, + <0 111 4>; #dma-cells = <1>; #dma-channels = <8>; #dma-requests = <32>; @@ -84,6 +92,22 @@ }; }; + can0: can@ffc00000 { + compatible = "bosch,d_can"; + reg = <0xffc00000 0x1000>; + interrupts = <0 131 4>, <0 132 4>, <0 133 4>, <0 134 4>; + clocks = <&can0_clk>; + status = "disabled"; + }; + + can1: can@ffc01000 { + compatible = "bosch,d_can"; + reg = <0xffc01000 0x1000>; + interrupts = <0 135 4>, <0 136 4>, <0 137 4>, <0 138 4>; + clocks = <&can1_clk>; + status = "disabled"; + }; + clkmgr@ffd04000 { compatible = "altr,clk-mgr"; reg = <0xffd04000 0x1000>; @@ -124,7 +148,7 @@ #clock-cells = <0>; compatible = "altr,socfpga-perip-clk"; clocks = <&main_pll>; - fixed-divider = <2>; + div-reg = <0xe0 0 9>; reg = <0x48>; }; @@ -132,7 +156,7 @@ #clock-cells = <0>; compatible = "altr,socfpga-perip-clk"; clocks = <&main_pll>; - fixed-divider = <4>; + div-reg = <0xe4 0 9>; reg = <0x4C>; }; @@ -140,7 +164,7 @@ #clock-cells = <0>; compatible = "altr,socfpga-perip-clk"; clocks = <&main_pll>; - fixed-divider = <4>; + div-reg = <0xe8 0 9>; reg = <0x50>; }; @@ -460,6 +484,8 @@ mac-address = [00 00 00 00 00 00];/* Filled in by U-Boot */ clocks = <&emac0_clk>; clock-names = "stmmaceth"; + resets = <&rst EMAC0_RESET>; + reset-names = "stmmaceth"; status = "disabled"; }; @@ -472,9 +498,111 @@ mac-address = [00 00 00 00 00 00];/* Filled in by U-Boot */ clocks = <&emac1_clk>; clock-names = "stmmaceth"; + resets = <&rst EMAC1_RESET>; + reset-names = "stmmaceth"; + status = "disabled"; + }; + + i2c0: i2c@ffc04000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0xffc04000 0x1000>; + clocks = <&l4_sp_clk>; + interrupts = <0 158 0x4>; + status = "disabled"; + }; + + i2c1: i2c@ffc05000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0xffc05000 0x1000>; + clocks = <&l4_sp_clk>; + interrupts = <0 159 0x4>; status = "disabled"; }; + i2c2: i2c@ffc06000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0xffc06000 0x1000>; + clocks = <&l4_sp_clk>; + interrupts = <0 160 0x4>; + status = "disabled"; + }; + + i2c3: i2c@ffc07000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0xffc07000 0x1000>; + clocks = <&l4_sp_clk>; + interrupts = <0 161 0x4>; + status = "disabled"; + }; + + gpio@ff708000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dw-apb-gpio"; + reg = <0xff708000 0x1000>; + clocks = <&per_base_clk>; + status = "disabled"; + + gpio0: gpio-controller@0 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <29>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <0 164 4>; + }; + }; + + gpio@ff709000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dw-apb-gpio"; + reg = <0xff709000 0x1000>; + clocks = <&per_base_clk>; + status = "disabled"; + + gpio1: gpio-controller@0 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <29>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <0 165 4>; + }; + }; + + gpio@ff70a000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dw-apb-gpio"; + reg = <0xff70a000 0x1000>; + clocks = <&per_base_clk>; + status = "disabled"; + + gpio2: gpio-controller@0 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <27>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <0 166 4>; + }; + }; + L2: l2-cache@fffef000 { compatible = "arm,pl310-cache"; reg = <0xfffef000 0x1000>; @@ -508,24 +636,32 @@ compatible = "snps,dw-apb-timer"; interrupts = <0 167 4>; reg = <0xffc08000 0x1000>; + clocks = <&l4_sp_clk>; + clock-names = "timer"; }; timer1: timer1@ffc09000 { compatible = "snps,dw-apb-timer"; interrupts = <0 168 4>; reg = <0xffc09000 0x1000>; + clocks = <&l4_sp_clk>; + clock-names = "timer"; }; timer2: timer2@ffd00000 { compatible = "snps,dw-apb-timer"; interrupts = <0 169 4>; reg = <0xffd00000 0x1000>; + clocks = <&osc1>; + clock-names = "timer"; }; timer3: timer3@ffd01000 { compatible = "snps,dw-apb-timer"; interrupts = <0 170 4>; reg = <0xffd01000 0x1000>; + clocks = <&osc1>; + clock-names = "timer"; }; uart0: serial0@ffc02000 { @@ -534,6 +670,7 @@ interrupts = <0 162 4>; reg-shift = <2>; reg-io-width = <4>; + clocks = <&l4_sp_clk>; }; uart1: serial1@ffc03000 { @@ -542,13 +679,58 @@ interrupts = <0 163 4>; reg-shift = <2>; reg-io-width = <4>; + clocks = <&l4_sp_clk>; }; - rstmgr@ffd05000 { + rst: rstmgr@ffd05000 { compatible = "altr,rst-mgr"; reg = <0xffd05000 0x1000>; }; + usbphy0: usbphy@0 { + #phy-cells = <0>; + compatible = "usb-nop-xceiv"; + status = "okay"; + }; + + usb0: usb@ffb00000 { + compatible = "snps,dwc2"; + reg = <0xffb00000 0xffff>; + interrupts = <0 125 4>; + clocks = <&usb_mp_clk>; + clock-names = "otg"; + phys = <&usbphy0>; + phy-names = "usb2-phy"; + status = "disabled"; + }; + + usb1: usb@ffb40000 { + compatible = "snps,dwc2"; + reg = <0xffb40000 0xffff>; + interrupts = <0 128 4>; + clocks = <&usb_mp_clk>; + clock-names = "otg"; + phys = <&usbphy0>; + phy-names = "usb2-phy"; + status = "disabled"; + }; + + watchdog0: watchdog@ffd02000 { + compatible = "snps,dw-wdt"; + reg = <0xffd02000 0x1000>; + interrupts = <0 171 4>; + clocks = <&osc1>; + status = "disabled"; + }; + + watchdog1: watchdog@ffd03000 { + compatible = "snps,dw-wdt"; + reg = <0xffd03000 0x1000>; + interrupts = <0 172 4>; + clocks = <&osc1>; + status = "disabled"; + }; + sysmgr: sysmgr@ffd08000 { compatible = "altr,sys-mgr", "syscon"; reg = <0xffd08000 0x4000>; diff --git a/arch/arm/boot/dts/socfpga_arria5.dtsi b/arch/arm/boot/dts/socfpga_arria5.dtsi index 6c87b7070ca7..12d1c2ccaf5b 100644 --- a/arch/arm/boot/dts/socfpga_arria5.dtsi +++ b/arch/arm/boot/dts/socfpga_arria5.dtsi @@ -15,7 +15,7 @@ */ /dts-v1/; -/include/ "socfpga.dtsi" +#include "socfpga.dtsi" / { soc { @@ -38,32 +38,8 @@ }; }; - serial0@ffc02000 { - clock-frequency = <100000000>; - }; - - serial1@ffc03000 { - clock-frequency = <100000000>; - }; - sysmgr@ffd08000 { cpu1-start-addr = <0xffd080c4>; }; - - timer0@ffc08000 { - clock-frequency = <100000000>; - }; - - timer1@ffc09000 { - clock-frequency = <100000000>; - }; - - timer2@ffd00000 { - clock-frequency = <25000000>; - }; - - timer3@ffd01000 { - clock-frequency = <25000000>; - }; }; }; diff --git a/arch/arm/boot/dts/socfpga_arria5_socdk.dts b/arch/arm/boot/dts/socfpga_arria5_socdk.dts index a87ee1c07661..d532d171e391 100644 --- a/arch/arm/boot/dts/socfpga_arria5_socdk.dts +++ b/arch/arm/boot/dts/socfpga_arria5_socdk.dts @@ -15,7 +15,7 @@ * along with this program. If not, see <http://www.gnu.org/licenses/>. */ -/include/ "socfpga_arria5.dtsi" +#include "socfpga_arria5.dtsi" / { model = "Altera SOCFPGA Arria V SoC Development Kit"; @@ -59,3 +59,22 @@ rxdv-skew-ps = <0>; rxc-skew-ps = <2000>; }; + +&i2c0 { + status = "okay"; + + eeprom@51 { + compatible = "atmel,24c32"; + reg = <0x51>; + pagesize = <32>; + }; + + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; +}; + +&usb1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/socfpga_cyclone5.dtsi b/arch/arm/boot/dts/socfpga_cyclone5.dtsi index ca41b0ebf461..bf511828729f 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5.dtsi +++ b/arch/arm/boot/dts/socfpga_cyclone5.dtsi @@ -16,7 +16,7 @@ */ /dts-v1/; -/include/ "socfpga.dtsi" +#include "socfpga.dtsi" / { soc { @@ -45,30 +45,6 @@ status = "okay"; }; - timer0@ffc08000 { - clock-frequency = <100000000>; - }; - - timer1@ffc09000 { - clock-frequency = <100000000>; - }; - - timer2@ffd00000 { - clock-frequency = <25000000>; - }; - - timer3@ffd01000 { - clock-frequency = <25000000>; - }; - - serial0@ffc02000 { - clock-frequency = <100000000>; - }; - - serial1@ffc03000 { - clock-frequency = <100000000>; - }; - sysmgr@ffd08000 { cpu1-start-addr = <0xffd080c4>; }; diff --git a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts index ae16d975196d..45de1514af0a 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts @@ -15,7 +15,7 @@ * along with this program. If not, see <http://www.gnu.org/licenses/>. */ -/include/ "socfpga_cyclone5.dtsi" +#include "socfpga_cyclone5.dtsi" / { model = "Altera SOCFPGA Cyclone V SoC Development Kit"; @@ -52,3 +52,22 @@ rxdv-skew-ps = <0>; rxc-skew-ps = <2000>; }; + +&i2c0 { + status = "okay"; + + eeprom@51 { + compatible = "atmel,24c32"; + reg = <0x51>; + pagesize = <32>; + }; + + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; +}; + +&usb1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts index b79e2a2bf175..d26f155f5fd9 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts @@ -15,7 +15,7 @@ * along with this program. If not, see <http://www.gnu.org/licenses/>. */ -/include/ "socfpga_cyclone5.dtsi" +#include "socfpga_cyclone5.dtsi" / { model = "Terasic SoCkit"; @@ -52,3 +52,7 @@ rxdv-skew-ps = <0>; rxc-skew-ps = <2000>; }; + +&usb1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts b/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts new file mode 100644 index 000000000000..a1814b457450 --- /dev/null +++ b/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts @@ -0,0 +1,50 @@ +/* + * Copyright (C) 2014 Steffen Trumtrar <s.trumtrar@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "socfpga_cyclone5.dtsi" + +/ { + model = "EBV SOCrates"; + compatible = "ebv,socrates", "altr,socfpga-cyclone5", "altr,socfpga"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory { + name = "memory"; + device_type = "memory"; + reg = <0x0 0x40000000>; /* 1GB */ + }; +}; + +&gmac1 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + rtc: rtc@68 { + compatible = "stm,m41t82"; + reg = <0x68>; + }; +}; + +&mmc { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/socfpga_vt.dts b/arch/arm/boot/dts/socfpga_vt.dts index 87d6f759a9c1..09792b411110 100644 --- a/arch/arm/boot/dts/socfpga_vt.dts +++ b/arch/arm/boot/dts/socfpga_vt.dts @@ -16,7 +16,7 @@ */ /dts-v1/; -/include/ "socfpga.dtsi" +#include "socfpga.dtsi" / { model = "Altera SOCFPGA VT"; diff --git a/arch/arm/boot/dts/stih407-b2120.dts b/arch/arm/boot/dts/stih407-b2120.dts new file mode 100644 index 000000000000..fe69f92e5f82 --- /dev/null +++ b/arch/arm/boot/dts/stih407-b2120.dts @@ -0,0 +1,78 @@ +/* + * Copyright (C) 2014 STMicroelectronics (R&D) Limited. + * Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; +#include "stih407.dtsi" +/ { + model = "STiH407 B2120"; + compatible = "st,stih407-b2120", "st,stih407"; + + chosen { + bootargs = "console=ttyAS0,115200"; + linux,stdout-path = &sbc_serial0; + }; + + memory { + device_type = "memory"; + reg = <0x40000000 0x80000000>; + }; + + aliases { + ttyAS0 = &sbc_serial0; + }; + + soc { + sbc_serial0: serial@9530000 { + status = "okay"; + }; + + leds { + compatible = "gpio-leds"; + red { + #gpio-cells = <2>; + label = "Front Panel LED"; + gpios = <&pio4 1 0>; + linux,default-trigger = "heartbeat"; + }; + green { + #gpio-cells = <2>; + gpios = <&pio1 3 0>; + default-state = "off"; + }; + }; + + i2c@9842000 { + status = "okay"; + }; + + i2c@9843000 { + status = "okay"; + }; + + i2c@9844000 { + status = "okay"; + }; + + i2c@9845000 { + status = "okay"; + }; + + i2c@9540000 { + status = "okay"; + }; + + /* SSC11 to HDMI */ + i2c@9541000 { + status = "okay"; + /* HDMI V1.3a supports Standard mode only */ + clock-frequency = <100000>; + st,i2c-min-scl-pulse-width-us = <0>; + st,i2c-min-sda-pulse-width-us = <5>; + }; + }; +}; diff --git a/arch/arm/boot/dts/stih407-clock.dtsi b/arch/arm/boot/dts/stih407-clock.dtsi new file mode 100644 index 000000000000..800f46f009f3 --- /dev/null +++ b/arch/arm/boot/dts/stih407-clock.dtsi @@ -0,0 +1,39 @@ +/* + * Copyright (C) 2014 STMicroelectronics R&D Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/ { + clocks { + /* + * Fixed 30MHz oscillator inputs to SoC + */ + clk_sysin: clk-sysin { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <30000000>; + }; + + /* + * ARM Peripheral clock for timers + */ + arm_periph_clk: arm-periph-clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <600000000>; + }; + + /* + * Bootloader initialized system infrastructure clock for + * serial devices. + */ + clk_ext2f_a9: clockgen-c0@13 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <200000000>; + clock-output-names = "clk-s-icn-reg-0"; + }; + }; +}; diff --git a/arch/arm/boot/dts/stih407-pinctrl.dtsi b/arch/arm/boot/dts/stih407-pinctrl.dtsi new file mode 100644 index 000000000000..402844cb3152 --- /dev/null +++ b/arch/arm/boot/dts/stih407-pinctrl.dtsi @@ -0,0 +1,615 @@ +/* + * Copyright (C) 2014 STMicroelectronics Limited. + * Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + */ +#include "st-pincfg.h" +#include <dt-bindings/interrupt-controller/arm-gic.h> +/ { + + aliases { + /* 0-5: PIO_SBC */ + gpio0 = &pio0; + gpio1 = &pio1; + gpio2 = &pio2; + gpio3 = &pio3; + gpio4 = &pio4; + gpio5 = &pio5; + /* 10-19: PIO_FRONT0 */ + gpio6 = &pio10; + gpio7 = &pio11; + gpio8 = &pio12; + gpio9 = &pio13; + gpio10 = &pio14; + gpio11 = &pio15; + gpio12 = &pio16; + gpio13 = &pio17; + gpio14 = &pio18; + gpio15 = &pio19; + /* 20: PIO_FRONT1 */ + gpio16 = &pio20; + /* 30-35: PIO_REAR */ + gpio17 = &pio30; + gpio18 = &pio31; + gpio19 = &pio32; + gpio20 = &pio33; + gpio21 = &pio34; + gpio22 = &pio35; + /* 40-42: PIO_FLASH */ + gpio23 = &pio40; + gpio24 = &pio41; + gpio25 = &pio42; + }; + + soc { + pin-controller-sbc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,stih407-sbc-pinctrl"; + st,syscfg = <&syscfg_sbc>; + reg = <0x0961f080 0x4>; + reg-names = "irqmux"; + interrupts = <GIC_SPI 188 IRQ_TYPE_NONE>; + interrupts-names = "irqmux"; + ranges = <0 0x09610000 0x6000>; + + pio0: gpio@09610000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x0 0x100>; + st,bank-name = "PIO0"; + }; + pio1: gpio@09611000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x1000 0x100>; + st,bank-name = "PIO1"; + }; + pio2: gpio@09612000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x2000 0x100>; + st,bank-name = "PIO2"; + }; + pio3: gpio@09613000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x3000 0x100>; + st,bank-name = "PIO3"; + }; + pio4: gpio@09614000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x4000 0x100>; + st,bank-name = "PIO4"; + }; + + pio5: gpio@09615000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x5000 0x100>; + st,bank-name = "PIO5"; + }; + + rc { + pinctrl_ir: ir0 { + st,pins { + ir = <&pio4 0 ALT2 IN>; + }; + }; + }; + + /* SBC_ASC0 - UART10 */ + sbc_serial0 { + pinctrl_sbc_serial0: sbc_serial0-0 { + st,pins { + tx = <&pio3 4 ALT1 OUT>; + rx = <&pio3 5 ALT1 IN>; + }; + }; + }; + /* SBC_ASC1 - UART11 */ + sbc_serial1 { + pinctrl_sbc_serial1: sbc_serial1-0 { + st,pins { + tx = <&pio2 6 ALT3 OUT>; + rx = <&pio2 7 ALT3 IN>; + }; + }; + }; + + i2c10 { + pinctrl_i2c10_default: i2c10-default { + st,pins { + sda = <&pio4 6 ALT1 BIDIR>; + scl = <&pio4 5 ALT1 BIDIR>; + }; + }; + }; + + i2c11 { + pinctrl_i2c11_default: i2c11-default { + st,pins { + sda = <&pio5 1 ALT1 BIDIR>; + scl = <&pio5 0 ALT1 BIDIR>; + }; + }; + }; + + keyscan { + pinctrl_keyscan: keyscan { + st,pins { + keyin0 = <&pio4 0 ALT6 IN>; + keyin1 = <&pio4 5 ALT4 IN>; + keyin2 = <&pio0 4 ALT2 IN>; + keyin3 = <&pio2 6 ALT2 IN>; + + keyout0 = <&pio4 6 ALT4 OUT>; + keyout1 = <&pio1 7 ALT2 OUT>; + keyout2 = <&pio0 6 ALT2 OUT>; + keyout3 = <&pio2 7 ALT2 OUT>; + }; + }; + }; + + gmac1 { + /* + * Almost all the boards based on STiH407 SoC have an embedded + * switch where the mdio/mdc have been used for managing the SMI + * iface via I2C. For this reason these lines can be allocated + * by using dedicated configuration (in case of there will be a + * standard PHY transceiver on-board). + */ + pinctrl_rgmii1: rgmii1-0 { + st,pins { + + txd0 = <&pio0 0 ALT1 OUT DE_IO 0 CLK_A>; + txd1 = <&pio0 1 ALT1 OUT DE_IO 0 CLK_A>; + txd2 = <&pio0 2 ALT1 OUT DE_IO 0 CLK_A>; + txd3 = <&pio0 3 ALT1 OUT DE_IO 0 CLK_A>; + txen = <&pio0 5 ALT1 OUT DE_IO 0 CLK_A>; + txclk = <&pio0 6 ALT1 IN NICLK 0 CLK_A>; + rxd0 = <&pio1 4 ALT1 IN DE_IO 0 CLK_A>; + rxd1 = <&pio1 5 ALT1 IN DE_IO 0 CLK_A>; + rxd2 = <&pio1 6 ALT1 IN DE_IO 0 CLK_A>; + rxd3 = <&pio1 7 ALT1 IN DE_IO 0 CLK_A>; + rxdv = <&pio2 0 ALT1 IN DE_IO 0 CLK_A>; + rxclk = <&pio2 2 ALT1 IN NICLK 500 CLK_A>; + clk125 = <&pio3 7 ALT4 IN NICLK 0 CLK_A>; + phyclk = <&pio2 3 ALT4 OUT NICLK 1750 CLK_B>; + }; + }; + + pinctrl_rgmii1_mdio: rgmii1-mdio { + st,pins { + mdio = <&pio1 0 ALT1 OUT BYPASS 0>; + mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>; + mdint = <&pio1 3 ALT1 IN BYPASS 0>; + }; + }; + + pinctrl_mii1: mii1 { + st,pins { + txd0 = <&pio0 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>; + txd1 = <&pio0 1 ALT1 OUT SE_NICLK_IO 0 CLK_A>; + txd2 = <&pio0 2 ALT1 OUT SE_NICLK_IO 0 CLK_A>; + txd3 = <&pio0 3 ALT1 OUT SE_NICLK_IO 0 CLK_A>; + txer = <&pio0 4 ALT1 OUT SE_NICLK_IO 0 CLK_A>; + txen = <&pio0 5 ALT1 OUT SE_NICLK_IO 0 CLK_A>; + txclk = <&pio0 6 ALT1 IN NICLK 0 CLK_A>; + col = <&pio0 7 ALT1 IN BYPASS 1000>; + + mdio = <&pio1 0 ALT1 OUT BYPASS 1500>; + mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>; + crs = <&pio1 2 ALT1 IN BYPASS 1000>; + mdint = <&pio1 3 ALT1 IN BYPASS 0>; + rxd0 = <&pio1 4 ALT1 IN SE_NICLK_IO 0 CLK_A>; + rxd1 = <&pio1 5 ALT1 IN SE_NICLK_IO 0 CLK_A>; + rxd2 = <&pio1 6 ALT1 IN SE_NICLK_IO 0 CLK_A>; + rxd3 = <&pio1 7 ALT1 IN SE_NICLK_IO 0 CLK_A>; + + rxdv = <&pio2 0 ALT1 IN SE_NICLK_IO 0 CLK_A>; + rx_er = <&pio2 1 ALT1 IN SE_NICLK_IO 0 CLK_A>; + rxclk = <&pio2 2 ALT1 IN NICLK 0 CLK_A>; + phyclk = <&pio2 3 ALT1 OUT NICLK 0 CLK_A>; + }; + }; + }; + + pwm1 { + pinctrl_pwm1_chan0_default: pwm1-0-default { + st,pins { + pwm-out = <&pio3 0 ALT1 OUT>; + }; + }; + pinctrl_pwm1_chan1_default: pwm1-1-default { + st,pins { + pwm-out = <&pio4 4 ALT1 OUT>; + }; + }; + pinctrl_pwm1_chan2_default: pwm1-2-default { + st,pins { + pwm-out = <&pio4 6 ALT3 OUT>; + }; + }; + pinctrl_pwm1_chan3_default: pwm1-3-default { + st,pins { + pwm-out = <&pio4 7 ALT3 OUT>; + }; + }; + }; + }; + + pin-controller-front0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,stih407-front-pinctrl"; + st,syscfg = <&syscfg_front>; + reg = <0x0920f080 0x4>; + reg-names = "irqmux"; + interrupts = <GIC_SPI 189 IRQ_TYPE_NONE>; + interrupts-names = "irqmux"; + ranges = <0 0x09200000 0x10000>; + + pio10: pio@09200000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x0 0x100>; + st,bank-name = "PIO10"; + }; + pio11: pio@09201000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x1000 0x100>; + st,bank-name = "PIO11"; + }; + pio12: pio@09202000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x2000 0x100>; + st,bank-name = "PIO12"; + }; + pio13: pio@09203000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x3000 0x100>; + st,bank-name = "PIO13"; + }; + pio14: pio@09204000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x4000 0x100>; + st,bank-name = "PIO14"; + }; + pio15: pio@09205000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x5000 0x100>; + st,bank-name = "PIO15"; + }; + pio16: pio@09206000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x6000 0x100>; + st,bank-name = "PIO16"; + }; + pio17: pio@09207000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x7000 0x100>; + st,bank-name = "PIO17"; + }; + pio18: pio@09208000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x8000 0x100>; + st,bank-name = "PIO18"; + }; + pio19: pio@09209000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x9000 0x100>; + st,bank-name = "PIO19"; + }; + + /* Comms */ + serial0 { + pinctrl_serial0: serial0-0 { + st,pins { + tx = <&pio17 0 ALT1 OUT>; + rx = <&pio17 1 ALT1 IN>; + }; + }; + }; + + serial1 { + pinctrl_serial1: serial1-0 { + st,pins { + tx = <&pio16 0 ALT1 OUT>; + rx = <&pio16 1 ALT1 IN>; + }; + }; + }; + + serial2 { + pinctrl_serial2: serial2-0 { + st,pins { + tx = <&pio15 0 ALT1 OUT>; + rx = <&pio15 1 ALT1 IN>; + }; + }; + }; + + mmc1 { + pinctrl_sd1: sd1-0 { + st,pins { + sd_clk = <&pio19 3 ALT5 BIDIR NICLK 0 CLK_B>; + sd_cmd = <&pio19 2 ALT5 BIDIR_PU BYPASS 0>; + sd_dat0 = <&pio19 4 ALT5 BIDIR_PU BYPASS 0>; + sd_dat1 = <&pio19 5 ALT5 BIDIR_PU BYPASS 0>; + sd_dat2 = <&pio19 6 ALT5 BIDIR_PU BYPASS 0>; + sd_dat3 = <&pio19 7 ALT5 BIDIR_PU BYPASS 0>; + sd_led = <&pio16 6 ALT6 OUT>; + sd_pwren = <&pio16 7 ALT6 OUT>; + sd_cd = <&pio19 0 ALT6 IN>; + sd_wp = <&pio19 1 ALT6 IN>; + }; + }; + }; + + + i2c0 { + pinctrl_i2c0_default: i2c0-default { + st,pins { + sda = <&pio10 6 ALT2 BIDIR>; + scl = <&pio10 5 ALT2 BIDIR>; + }; + }; + }; + + i2c1 { + pinctrl_i2c1_default: i2c1-default { + st,pins { + sda = <&pio11 1 ALT2 BIDIR>; + scl = <&pio11 0 ALT2 BIDIR>; + }; + }; + }; + + i2c2 { + pinctrl_i2c2_default: i2c2-default { + st,pins { + sda = <&pio15 6 ALT2 BIDIR>; + scl = <&pio15 5 ALT2 BIDIR>; + }; + }; + }; + + i2c3 { + pinctrl_i2c3_default: i2c3-default { + st,pins { + sda = <&pio18 6 ALT1 BIDIR>; + scl = <&pio18 5 ALT1 BIDIR>; + }; + }; + }; + + spi0 { + pinctrl_spi0_default: spi0-default { + st,pins { + mtsr = <&pio12 6 ALT2 BIDIR>; + mrst = <&pio12 7 ALT2 BIDIR>; + scl = <&pio12 5 ALT2 BIDIR>; + }; + }; + }; + }; + + pin-controller-front1 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,stih407-front-pinctrl"; + st,syscfg = <&syscfg_front>; + reg = <0x0921f080 0x4>; + reg-names = "irqmux"; + interrupts = <GIC_SPI 190 IRQ_TYPE_NONE>; + interrupts-names = "irqmux"; + ranges = <0 0x09210000 0x10000>; + + pio20: pio@09210000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x0 0x100>; + st,bank-name = "PIO20"; + }; + }; + + pin-controller-rear { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,stih407-rear-pinctrl"; + st,syscfg = <&syscfg_rear>; + reg = <0x0922f080 0x4>; + reg-names = "irqmux"; + interrupts = <GIC_SPI 191 IRQ_TYPE_NONE>; + interrupts-names = "irqmux"; + ranges = <0 0x09220000 0x6000>; + + pio30: gpio@09220000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x0 0x100>; + st,bank-name = "PIO30"; + }; + pio31: gpio@09221000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x1000 0x100>; + st,bank-name = "PIO31"; + }; + pio32: gpio@09222000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x2000 0x100>; + st,bank-name = "PIO32"; + }; + pio33: gpio@09223000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x3000 0x100>; + st,bank-name = "PIO33"; + }; + pio34: gpio@09224000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x4000 0x100>; + st,bank-name = "PIO34"; + }; + pio35: gpio@09225000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x5000 0x100>; + st,bank-name = "PIO35"; + }; + + i2c4 { + pinctrl_i2c4_default: i2c4-default { + st,pins { + sda = <&pio30 1 ALT1 BIDIR>; + scl = <&pio30 0 ALT1 BIDIR>; + }; + }; + }; + + i2c5 { + pinctrl_i2c5_default: i2c5-default { + st,pins { + sda = <&pio34 4 ALT1 BIDIR>; + scl = <&pio34 3 ALT1 BIDIR>; + }; + }; + }; + + usb3 { + pinctrl_usb3: usb3-2 { + st,pins { + usb-oc-detect = <&pio35 4 ALT1 IN>; + usb-pwr-enable = <&pio35 5 ALT1 OUT>; + usb-vbus-valid = <&pio35 6 ALT1 IN>; + }; + }; + }; + + pwm0 { + pinctrl_pwm0_chan0_default: pwm0-0-default { + st,pins { + pwm-out = <&pio31 1 ALT1 OUT>; + }; + }; + }; + }; + + pin-controller-flash { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,stih407-flash-pinctrl"; + st,syscfg = <&syscfg_flash>; + reg = <0x0923f080 0x4>; + reg-names = "irqmux"; + interrupts = <GIC_SPI 192 IRQ_TYPE_NONE>; + interrupts-names = "irqmux"; + ranges = <0 0x09230000 0x3000>; + + pio40: gpio@09230000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0 0x100>; + st,bank-name = "PIO40"; + }; + pio41: gpio@09231000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x1000 0x100>; + st,bank-name = "PIO41"; + }; + pio42: gpio@09232000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x2000 0x100>; + st,bank-name = "PIO42"; + }; + + mmc0 { + pinctrl_mmc0: mmc0-0 { + st,pins { + emmc_clk = <&pio40 6 ALT1 BIDIR>; + emmc_cmd = <&pio40 7 ALT1 BIDIR_PU>; + emmc_d0 = <&pio41 0 ALT1 BIDIR_PU>; + emmc_d1 = <&pio41 1 ALT1 BIDIR_PU>; + emmc_d2 = <&pio41 2 ALT1 BIDIR_PU>; + emmc_d3 = <&pio41 3 ALT1 BIDIR_PU>; + emmc_d4 = <&pio41 4 ALT1 BIDIR_PU>; + emmc_d5 = <&pio41 5 ALT1 BIDIR_PU>; + emmc_d6 = <&pio41 6 ALT1 BIDIR_PU>; + emmc_d7 = <&pio41 7 ALT1 BIDIR_PU>; + }; + }; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/stih407.dtsi b/arch/arm/boot/dts/stih407.dtsi new file mode 100644 index 000000000000..4f9024f19866 --- /dev/null +++ b/arch/arm/boot/dts/stih407.dtsi @@ -0,0 +1,263 @@ +/* + * Copyright (C) 2014 STMicroelectronics Limited. + * Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + */ +#include "stih407-clock.dtsi" +#include "stih407-pinctrl.dtsi" +/ { + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0>; + }; + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <1>; + }; + }; + + intc: interrupt-controller@08761000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x08761000 0x1000>, <0x08760100 0x100>; + }; + + scu@08760000 { + compatible = "arm,cortex-a9-scu"; + reg = <0x08760000 0x1000>; + }; + + timer@08760200 { + interrupt-parent = <&intc>; + compatible = "arm,cortex-a9-global-timer"; + reg = <0x08760200 0x100>; + interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&arm_periph_clk>; + }; + + l2: cache-controller { + compatible = "arm,pl310-cache"; + reg = <0x08762000 0x1000>; + arm,data-latency = <3 3 3>; + arm,tag-latency = <2 2 2>; + cache-unified; + cache-level = <2>; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&intc>; + ranges; + compatible = "simple-bus"; + + syscfg_sbc: sbc-syscfg@9620000 { + compatible = "st,stih407-sbc-syscfg", "syscon"; + reg = <0x9620000 0x1000>; + }; + + syscfg_front: front-syscfg@9280000 { + compatible = "st,stih407-front-syscfg", "syscon"; + reg = <0x9280000 0x1000>; + }; + + syscfg_rear: rear-syscfg@9290000 { + compatible = "st,stih407-rear-syscfg", "syscon"; + reg = <0x9290000 0x1000>; + }; + + syscfg_flash: flash-syscfg@92a0000 { + compatible = "st,stih407-flash-syscfg", "syscon"; + reg = <0x92a0000 0x1000>; + }; + + syscfg_sbc_reg: fvdp-lite-syscfg@9600000 { + compatible = "st,stih407-sbc-reg-syscfg", "syscon"; + reg = <0x9600000 0x1000>; + }; + + syscfg_core: core-syscfg@92b0000 { + compatible = "st,stih407-core-syscfg", "syscon"; + reg = <0x92b0000 0x1000>; + }; + + syscfg_lpm: lpm-syscfg@94b5100 { + compatible = "st,stih407-lpm-syscfg", "syscon"; + reg = <0x94b5100 0x1000>; + }; + + serial@9830000 { + compatible = "st,asc"; + reg = <0x9830000 0x2c>; + interrupts = <GIC_SPI 122 IRQ_TYPE_NONE>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_serial0>; + clocks = <&clk_ext2f_a9>; + + status = "disabled"; + }; + + serial@9831000 { + compatible = "st,asc"; + reg = <0x9831000 0x2c>; + interrupts = <GIC_SPI 123 IRQ_TYPE_NONE>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_serial1>; + clocks = <&clk_ext2f_a9>; + + status = "disabled"; + }; + + serial@9832000 { + compatible = "st,asc"; + reg = <0x9832000 0x2c>; + interrupts = <GIC_SPI 124 IRQ_TYPE_NONE>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_serial2>; + clocks = <&clk_ext2f_a9>; + + status = "disabled"; + }; + + /* SBC_ASC0 - UART10 */ + sbc_serial0: serial@9530000 { + compatible = "st,asc"; + reg = <0x9530000 0x2c>; + interrupts = <GIC_SPI 138 IRQ_TYPE_NONE>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sbc_serial0>; + clocks = <&clk_sysin>; + + status = "disabled"; + }; + + serial@9531000 { + compatible = "st,asc"; + reg = <0x9531000 0x2c>; + interrupts = <GIC_SPI 139 IRQ_TYPE_NONE>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sbc_serial1>; + clocks = <&clk_sysin>; + + status = "disabled"; + }; + + i2c@9840000 { + compatible = "st,comms-ssc4-i2c"; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x9840000 0x110>; + clocks = <&clk_ext2f_a9>; + clock-names = "ssc"; + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0_default>; + + status = "disabled"; + }; + + i2c@9841000 { + compatible = "st,comms-ssc4-i2c"; + reg = <0x9841000 0x110>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_ext2f_a9>; + clock-names = "ssc"; + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1_default>; + + status = "disabled"; + }; + + i2c@9842000 { + compatible = "st,comms-ssc4-i2c"; + reg = <0x9842000 0x110>; + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_ext2f_a9>; + clock-names = "ssc"; + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2_default>; + + status = "disabled"; + }; + + i2c@9843000 { + compatible = "st,comms-ssc4-i2c"; + reg = <0x9843000 0x110>; + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_ext2f_a9>; + clock-names = "ssc"; + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3_default>; + + status = "disabled"; + }; + + i2c@9844000 { + compatible = "st,comms-ssc4-i2c"; + reg = <0x9844000 0x110>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_ext2f_a9>; + clock-names = "ssc"; + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4_default>; + + status = "disabled"; + }; + + i2c@9845000 { + compatible = "st,comms-ssc4-i2c"; + reg = <0x9845000 0x110>; + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_ext2f_a9>; + clock-names = "ssc"; + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c5_default>; + + status = "disabled"; + }; + + + /* SSCs on SBC */ + i2c@9540000 { + compatible = "st,comms-ssc4-i2c"; + reg = <0x9540000 0x110>; + interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_sysin>; + clock-names = "ssc"; + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c10_default>; + + status = "disabled"; + }; + + i2c@9541000 { + compatible = "st,comms-ssc4-i2c"; + reg = <0x9541000 0x110>; + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_sysin>; + clock-names = "ssc"; + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c11_default>; + + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/stih415-b2000.dts b/arch/arm/boot/dts/stih415-b2000.dts index d4af53160435..bdfbd3765db2 100644 --- a/arch/arm/boot/dts/stih415-b2000.dts +++ b/arch/arm/boot/dts/stih415-b2000.dts @@ -11,5 +11,5 @@ #include "stih41x-b2000.dtsi" / { model = "STiH415 B2000 Board"; - compatible = "st,stih415", "st,stih415-b2000"; + compatible = "st,stih415-b2000", "st,stih415"; }; diff --git a/arch/arm/boot/dts/stih415-b2020.dts b/arch/arm/boot/dts/stih415-b2020.dts index 442b019e9a3a..71903a87bd31 100644 --- a/arch/arm/boot/dts/stih415-b2020.dts +++ b/arch/arm/boot/dts/stih415-b2020.dts @@ -11,5 +11,5 @@ #include "stih41x-b2020.dtsi" / { model = "STiH415 B2020 Board"; - compatible = "st,stih415", "st,stih415-b2020"; + compatible = "st,stih415-b2020", "st,stih415"; }; diff --git a/arch/arm/boot/dts/stih415-clock.dtsi b/arch/arm/boot/dts/stih415-clock.dtsi index d047dbc28d61..3ee34514bc4b 100644 --- a/arch/arm/boot/dts/stih415-clock.dtsi +++ b/arch/arm/boot/dts/stih415-clock.dtsi @@ -5,48 +5,529 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ + +#include <dt-bindings/clock/stih415-clks.h> + / { clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + /* * Fixed 30MHz oscillator input to SoC */ - CLK_SYSIN: CLK_SYSIN { + clk_sysin: clk-sysin { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <30000000>; }; /* - * ARM Peripheral clock for timers + * ClockGenAs on SASG1 */ - arm_periph_clk: arm_periph_clk { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <500000000>; + clockgen-a@fee62000 { + reg = <0xfee62000 0xb48>; + + clk_s_a0_pll: clk-s-a0-pll { + #clock-cells = <1>; + compatible = "st,clkgena-plls-c65"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-s-a0-pll0-hs", + "clk-s-a0-pll0-ls", + "clk-s-a0-pll1"; + }; + + clk_s_a0_osc_prediv: clk-s-a0-osc-prediv { + #clock-cells = <0>; + compatible = "st,clkgena-prediv-c65", + "st,clkgena-prediv"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-s-a0-osc-prediv"; + }; + + clk_s_a0_hs: clk-s-a0-hs { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c65-hs", + "st,clkgena-divmux"; + + clocks = <&clk_s_a0_osc_prediv>, + <&clk_s_a0_pll 0>, /* PLL0 HS */ + <&clk_s_a0_pll 2>; /* PLL1 */ + + clock-output-names = "clk-s-fdma-0", + "clk-s-fdma-1", + ""; /* clk-s-jit-sense */ + /* Fourth output unused */ + }; + + clk_s_a0_ls: clk-s-a0-ls { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c65-ls", + "st,clkgena-divmux"; + + clocks = <&clk_s_a0_osc_prediv>, + <&clk_s_a0_pll 1>, /* PLL0 LS */ + <&clk_s_a0_pll 2>; /* PLL1 */ + + clock-output-names = "clk-s-icn-reg-0", + "clk-s-icn-if-0", + "clk-s-icn-reg-lp-0", + "clk-s-emiss", + "clk-s-eth1-phy", + "clk-s-mii-ref-out"; + /* Remaining outputs unused */ + }; + }; + + clockgen-a@fee81000 { + reg = <0xfee81000 0xb48>; + + clk_s_a1_pll: clk-s-a1-pll { + #clock-cells = <1>; + compatible = "st,clkgena-plls-c65"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-s-a1-pll0-hs", + "clk-s-a1-pll0-ls", + "clk-s-a1-pll1"; + }; + + clk_s_a1_osc_prediv: clk-s-a1-osc-prediv { + #clock-cells = <0>; + compatible = "st,clkgena-prediv-c65", + "st,clkgena-prediv"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-s-a1-osc-prediv"; + }; + + clk_s_a1_hs: clk-s-a1-hs { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c65-hs", + "st,clkgena-divmux"; + + clocks = <&clk_s_a1_osc_prediv>, + <&clk_s_a1_pll 0>, /* PLL0 HS */ + <&clk_s_a1_pll 2>; /* PLL1 */ + + clock-output-names = "", /* Reserved */ + "", /* Reserved */ + "clk-s-stac-phy", + "clk-s-vtac-tx-phy"; + }; + + clk_s_a1_ls: clk-s-a1-ls { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c65-ls", + "st,clkgena-divmux"; + + clocks = <&clk_s_a1_osc_prediv>, + <&clk_s_a1_pll 1>, /* PLL0 LS */ + <&clk_s_a1_pll 2>; /* PLL1 */ + + clock-output-names = "clk-s-icn-if-2", + "clk-s-card-mmc", + "clk-s-icn-if-1", + "clk-s-gmac0-phy", + "clk-s-nand-ctrl", + "", /* Reserved */ + "clk-s-mii0-ref-out", + ""; /* clk-s-stac-sys */ + /* Remaining outputs unused */ + }; }; /* - * Bootloader initialized system infrastructure clock for - * serial devices. + * ClockGenAs on MPE41 */ - CLKS_ICN_REG_0: CLKS_ICN_REG_0 { + clockgen-a@fde12000 { + reg = <0xfde12000 0xb50>; + + clk_m_a0_pll0: clk-m-a0-pll0 { + #clock-cells = <1>; + compatible = "st,plls-c32-a1x-0", "st,clkgen-plls-c32"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-m-a0-pll0-phi0", + "clk-m-a0-pll0-phi1", + "clk-m-a0-pll0-phi2", + "clk-m-a0-pll0-phi3"; + }; + + clk_m_a0_pll1: clk-m-a0-pll1 { + #clock-cells = <1>; + compatible = "st,plls-c32-a1x-1", "st,clkgen-plls-c32"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-m-a0-pll1-phi0", + "clk-m-a0-pll1-phi1", + "clk-m-a0-pll1-phi2", + "clk-m-a0-pll1-phi3"; + }; + + clk_m_a0_osc_prediv: clk-m-a0-osc-prediv { + #clock-cells = <0>; + compatible = "st,clkgena-prediv-c32", + "st,clkgena-prediv"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-m-a0-osc-prediv"; + }; + + clk_m_a0_div0: clk-m-a0-div0 { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c32-odf0", + "st,clkgena-divmux"; + + clocks = <&clk_m_a0_osc_prediv>, + <&clk_m_a0_pll0 0>, /* PLL0 PHI0 */ + <&clk_m_a0_pll1 0>; /* PLL1 PHI0 */ + + clock-output-names = "clk-m-apb-pm", /* Unused */ + "", /* Unused */ + "", /* Unused */ + "", /* Unused */ + "clk-m-pp-dmu-0", + "clk-m-pp-dmu-1", + "clk-m-icm-disp", + ""; /* Unused */ + }; + + clk_m_a0_div1: clk-m-a0-div1 { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c32-odf1", + "st,clkgena-divmux"; + + clocks = <&clk_m_a0_osc_prediv>, + <&clk_m_a0_pll0 1>, /* PLL0 PHI1 */ + <&clk_m_a0_pll1 1>; /* PLL1 PHI1 */ + + clock-output-names = "", /* Unused */ + "", /* Unused */ + "clk-m-a9-ext2f", + "clk-m-st40rt", + "clk-m-st231-dmu-0", + "clk-m-st231-dmu-1", + "clk-m-st231-aud", + "clk-m-st231-gp-0"; + }; + + clk_m_a0_div2: clk-m-a0-div2 { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c32-odf2", + "st,clkgena-divmux"; + + clocks = <&clk_m_a0_osc_prediv>, + <&clk_m_a0_pll0 2>, /* PLL0 PHI2 */ + <&clk_m_a0_pll1 2>; /* PLL1 PHI2 */ + + clock-output-names = "clk-m-st231-gp-1", + "clk-m-icn-cpu", + "clk-m-icn-stac", + "clk-m-icn-dmu-0", + "clk-m-icn-dmu-1", + "", /* Unused */ + "", /* Unused */ + ""; /* Unused */ + }; + + clk_m_a0_div3: clk-m-a0-div3 { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c32-odf3", + "st,clkgena-divmux"; + + clocks = <&clk_m_a0_osc_prediv>, + <&clk_m_a0_pll0 3>, /* PLL0 PHI3 */ + <&clk_m_a0_pll1 3>; /* PLL1 PHI3 */ + + clock-output-names = "", /* Unused */ + "", /* Unused */ + "", /* Unused */ + "", /* Unused */ + "", /* Unused */ + "", /* Unused */ + "clk-m-icn-eram", + "clk-m-a9-trace"; + }; + }; + + clockgen-a@fd6db000 { + reg = <0xfd6db000 0xb50>; + + clk_m_a1_pll0: clk-m-a1-pll0 { + #clock-cells = <1>; + compatible = "st,plls-c32-a1x-0", "st,clkgen-plls-c32"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-m-a1-pll0-phi0", + "clk-m-a1-pll0-phi1", + "clk-m-a1-pll0-phi2", + "clk-m-a1-pll0-phi3"; + }; + + clk_m_a1_pll1: clk-m-a1-pll1 { + #clock-cells = <1>; + compatible = "st,plls-c32-a1x-1", "st,clkgen-plls-c32"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-m-a1-pll1-phi0", + "clk-m-a1-pll1-phi1", + "clk-m-a1-pll1-phi2", + "clk-m-a1-pll1-phi3"; + }; + + clk_m_a1_osc_prediv: clk-m-a1-osc-prediv { + #clock-cells = <0>; + compatible = "st,clkgena-prediv-c32", + "st,clkgena-prediv"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-m-a1-osc-prediv"; + }; + + clk_m_a1_div0: clk-m-a1-div0 { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c32-odf0", + "st,clkgena-divmux"; + + clocks = <&clk_m_a1_osc_prediv>, + <&clk_m_a1_pll0 0>, /* PLL0 PHI0 */ + <&clk_m_a1_pll1 0>; /* PLL1 PHI0 */ + + clock-output-names = "clk-m-fdma-12", + "clk-m-fdma-10", + "clk-m-fdma-11", + "clk-m-hva-lmi", + "clk-m-proc-sc", + "clk-m-tp", + "clk-m-icn-gpu", + "clk-m-icn-vdp-0"; + }; + + clk_m_a1_div1: clk-m-a1-div1 { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c32-odf1", + "st,clkgena-divmux"; + + clocks = <&clk_m_a1_osc_prediv>, + <&clk_m_a1_pll0 1>, /* PLL0 PHI1 */ + <&clk_m_a1_pll1 1>; /* PLL1 PHI1 */ + + clock-output-names = "clk-m-icn-vdp-1", + "clk-m-icn-vdp-2", + "clk-m-icn-vdp-3", + "clk-m-prv-t1-bus", + "clk-m-icn-vdp-4", + "clk-m-icn-reg-10", + "", /* Unused */ + ""; /* clk-m-icn-st231 */ + }; + + clk_m_a1_div2: clk-m-a1-div2 { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c32-odf2", + "st,clkgena-divmux"; + + clocks = <&clk_m_a1_osc_prediv>, + <&clk_m_a1_pll0 2>, /* PLL0 PHI2 */ + <&clk_m_a1_pll1 2>; /* PLL1 PHI2 */ + + clock-output-names = "clk-m-fvdp-proc-alt", + "", /* Unused */ + "", /* Unused */ + "", /* Unused */ + "", /* Unused */ + "", /* Unused */ + "", /* Unused */ + ""; /* Unused */ + }; + + clk_m_a1_div3: clk-m-a1-div3 { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c32-odf3", + "st,clkgena-divmux"; + + clocks = <&clk_m_a1_osc_prediv>, + <&clk_m_a1_pll0 3>, /* PLL0 PHI3 */ + <&clk_m_a1_pll1 3>; /* PLL1 PHI3 */ + + clock-output-names = "", /* Unused */ + "", /* Unused */ + "", /* Unused */ + "", /* Unused */ + "", /* Unused */ + "", /* Unused */ + "", /* Unused */ + ""; /* Unused */ + }; + }; + + clk_m_a9_ext2f_div2: clk-m-a9-ext2f-div2 { #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <100000000>; + compatible = "fixed-factor-clock"; + clocks = <&clk_m_a0_div1 2>; + clock-div = <2>; + clock-mult = <1>; }; - CLKS_GMAC0_PHY: clockgenA1@7 { + clockgen-a@fd345000 { + reg = <0xfd345000 0xb50>; + + clk_m_a2_pll0: clk-m-a2-pll0 { + #clock-cells = <1>; + compatible = "st,plls-c32-a1x-0", "st,clkgen-plls-c32"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-m-a2-pll0-phi0", + "clk-m-a2-pll0-phi1", + "clk-m-a2-pll0-phi2", + "clk-m-a2-pll0-phi3"; + }; + + clk_m_a2_pll1: clk-m-a2-pll1 { + #clock-cells = <1>; + compatible = "st,plls-c32-a1x-1", "st,clkgen-plls-c32"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-m-a2-pll1-phi0", + "clk-m-a2-pll1-phi1", + "clk-m-a2-pll1-phi2", + "clk-m-a2-pll1-phi3"; + }; + + clk_m_a2_osc_prediv: clk-m-a2-osc-prediv { + #clock-cells = <0>; + compatible = "st,clkgena-prediv-c32", + "st,clkgena-prediv"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-m-a2-osc-prediv"; + }; + + clk_m_a2_div0: clk-m-a2-div0 { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c32-odf0", + "st,clkgena-divmux"; + + clocks = <&clk_m_a2_osc_prediv>, + <&clk_m_a2_pll0 0>, /* PLL0 PHI0 */ + <&clk_m_a2_pll1 0>; /* PLL1 PHI0 */ + + clock-output-names = "clk-m-vtac-main-phy", + "clk-m-vtac-aux-phy", + "clk-m-stac-phy", + "clk-m-stac-sys", + "", /* clk-m-mpestac-pg */ + "", /* clk-m-mpestac-wc */ + "", /* clk-m-mpevtacaux-pg*/ + ""; /* clk-m-mpevtacmain-pg*/ + }; + + clk_m_a2_div1: clk-m-a2-div1 { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c32-odf1", + "st,clkgena-divmux"; + + clocks = <&clk_m_a2_osc_prediv>, + <&clk_m_a2_pll0 1>, /* PLL0 PHI1 */ + <&clk_m_a2_pll1 1>; /* PLL1 PHI1 */ + + clock-output-names = "", /* clk-m-mpevtacrx0-wc */ + "", /* clk-m-mpevtacrx1-wc */ + "clk-m-compo-main", + "clk-m-compo-aux", + "clk-m-bdisp-0", + "clk-m-bdisp-1", + "clk-m-icn-bdisp-0", + "clk-m-icn-bdisp-1"; + }; + + clk_m_a2_div2: clk-m-a2-div2 { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c32-odf2", + "st,clkgena-divmux"; + + clocks = <&clk_m_a2_osc_prediv>, + <&clk_m_a2_pll0 2>, /* PLL0 PHI2 */ + <&clk_m_a2_pll1 2>; /* PLL1 PHI2 */ + + clock-output-names = "", /* clk-m-icn-hqvdp0 */ + "", /* clk-m-icn-hqvdp1 */ + "clk-m-icn-compo", + "", /* clk-m-icn-vdpaux */ + "clk-m-icn-ts", + "clk-m-icn-reg-lp-10", + "clk-m-dcephy-impctrl", + ""; /* Unused */ + }; + + clk_m_a2_div3: clk-m-a2-div3 { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c32-odf3", + "st,clkgena-divmux"; + + clocks = <&clk_m_a2_osc_prediv>, + <&clk_m_a2_pll0 3>, /* PLL0 PHI3 */ + <&clk_m_a2_pll1 3>; /* PLL1 PHI3 */ + + clock-output-names = ""; /* Unused */ + /* Remaining outputs unused */ + }; + }; + + /* + * A9 PLL + */ + clockgen-a9@fdde00d8 { + reg = <0xfdde00d8 0x70>; + + clockgen_a9_pll: clockgen-a9-pll { + #clock-cells = <1>; + compatible = "st,stih415-plls-c32-a9", "st,clkgen-plls-c32"; + + clocks = <&clk_sysin>; + clock-output-names = "clockgen-a9-pll-odf"; + }; + }; + + /* + * ARM CPU related clocks + */ + clk_m_a9: clk-m-a9@fdde00d8 { #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <25000000>; - clock-output-names = "CLKS_GMAC0_PHY"; + compatible = "st,stih415-clkgen-a9-mux", "st,clkgen-mux"; + reg = <0xfdde00d8 0x4>; + clocks = <&clockgen_a9_pll 0>, + <&clockgen_a9_pll 0>, + <&clk_m_a0_div1 2>, + <&clk_m_a9_ext2f_div2>; }; - CLKS_ETH1_PHY: clockgenA0@7 { + /* + * ARM Peripheral clock for timers + */ + arm_periph_clk: clk-m-a9-periphs { #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <25000000>; - clock-output-names = "CLKS_ETH1_PHY"; + compatible = "fixed-factor-clock"; + clocks = <&clk_m_a9>; + clock-div = <2>; + clock-mult = <1>; }; }; }; diff --git a/arch/arm/boot/dts/stih415-pinctrl.dtsi b/arch/arm/boot/dts/stih415-pinctrl.dtsi index 81df870e5ee6..8509a037ae21 100644 --- a/arch/arm/boot/dts/stih415-pinctrl.dtsi +++ b/arch/arm/boot/dts/stih415-pinctrl.dtsi @@ -102,6 +102,22 @@ }; }; + keyscan { + pinctrl_keyscan: keyscan { + st,pins { + keyin0 = <&PIO0 2 ALT2 IN>; + keyin1 = <&PIO0 3 ALT2 IN>; + keyin2 = <&PIO0 4 ALT2 IN>; + keyin3 = <&PIO2 6 ALT2 IN>; + + keyout0 = <&PIO1 6 ALT2 OUT>; + keyout1 = <&PIO1 7 ALT2 OUT>; + keyout2 = <&PIO0 6 ALT2 OUT>; + keyout3 = <&PIO2 7 ALT2 OUT>; + }; + }; + }; + sbc_i2c0 { pinctrl_sbc_i2c0_default: sbc_i2c0-default { st,pins { diff --git a/arch/arm/boot/dts/stih415.dtsi b/arch/arm/boot/dts/stih415.dtsi index d89064c20c8a..d6f254f302fe 100644 --- a/arch/arm/boot/dts/stih415.dtsi +++ b/arch/arm/boot/dts/stih415.dtsi @@ -82,7 +82,7 @@ interrupts = <0 197 0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_serial2>; - clocks = <&CLKS_ICN_REG_0>; + clocks = <&clk_s_a0_ls CLK_ICN_REG>; }; /* SBC comms block ASCs in SASG1 */ @@ -91,7 +91,7 @@ status = "disabled"; reg = <0xfe531000 0x2c>; interrupts = <0 210 0>; - clocks = <&CLK_SYSIN>; + clocks = <&clk_sysin>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sbc_serial1>; }; @@ -100,7 +100,7 @@ compatible = "st,comms-ssc4-i2c"; reg = <0xfed40000 0x110>; interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&CLKS_ICN_REG_0>; + clocks = <&clk_s_a0_ls CLK_ICN_REG>; clock-names = "ssc"; clock-frequency = <400000>; pinctrl-names = "default"; @@ -113,7 +113,7 @@ compatible = "st,comms-ssc4-i2c"; reg = <0xfed41000 0x110>; interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&CLKS_ICN_REG_0>; + clocks = <&clk_s_a0_ls CLK_ICN_REG>; clock-names = "ssc"; clock-frequency = <400000>; pinctrl-names = "default"; @@ -126,7 +126,7 @@ compatible = "st,comms-ssc4-i2c"; reg = <0xfe540000 0x110>; interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&CLK_SYSIN>; + clocks = <&clk_sysin>; clock-names = "ssc"; clock-frequency = <400000>; pinctrl-names = "default"; @@ -139,7 +139,7 @@ compatible = "st,comms-ssc4-i2c"; reg = <0xfe541000 0x110>; interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&CLK_SYSIN>; + clocks = <&clk_sysin>; clock-names = "ssc"; clock-frequency = <400000>; pinctrl-names = "default"; @@ -170,7 +170,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mii0>; clock-names = "stmmaceth"; - clocks = <&CLKS_GMAC0_PHY>; + clocks = <&clk_s_a1_ls CLK_GMAC0_PHY>; }; ethernet1: dwmac@fef08000 { @@ -193,18 +193,30 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mii1>; clock-names = "stmmaceth"; - clocks = <&CLKS_ETH1_PHY>; + clocks = <&clk_s_a0_ls CLK_ETH1_PHY>; }; rc: rc@fe518000 { compatible = "st,comms-irb"; reg = <0xfe518000 0x234>; interrupts = <0 203 0>; - clocks = <&CLK_SYSIN>; + clocks = <&clk_sysin>; rx-mode = "infrared"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ir>; resets = <&softreset STIH415_IRB_SOFTRESET>; }; + + keyscan: keyscan@fe4b0000 { + compatible = "st,sti-keyscan"; + status = "disabled"; + reg = <0xfe4b0000 0x2000>; + interrupts = <GIC_SPI 212 IRQ_TYPE_NONE>; + clocks = <&clk_sysin>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_keyscan>; + resets = <&powerdown STIH415_KEYSCAN_POWERDOWN>, + <&softreset STIH415_KEYSCAN_SOFTRESET>; + }; }; }; diff --git a/arch/arm/boot/dts/stih416-b2000.dts b/arch/arm/boot/dts/stih416-b2000.dts index a5eb6eee10bf..488e80a5d69d 100644 --- a/arch/arm/boot/dts/stih416-b2000.dts +++ b/arch/arm/boot/dts/stih416-b2000.dts @@ -9,8 +9,7 @@ /dts-v1/; #include "stih416.dtsi" #include "stih41x-b2000.dtsi" - / { - compatible = "st,stih416", "st,stih416-b2000"; model = "STiH416 B2000"; + compatible = "st,stih416-b2000", "st,stih416"; }; diff --git a/arch/arm/boot/dts/stih416-b2020-revE.dts b/arch/arm/boot/dts/stih416-b2020-revE.dts new file mode 100644 index 000000000000..ba0fa2caaf18 --- /dev/null +++ b/arch/arm/boot/dts/stih416-b2020-revE.dts @@ -0,0 +1,35 @@ +/* + * Copyright (C) 2014 STMicroelectronics (R&D) Limited. + * Author: Lee Jones <lee.jones@linaro.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + */ +/dts-v1/; +#include "stih416.dtsi" +#include "stih41x-b2020.dtsi" +/ { + model = "STiH416 B2020 REV-E"; + compatible = "st,stih416-b2020", "st,stih416"; + + soc { + leds { + compatible = "gpio-leds"; + red { + #gpio-cells = <1>; + label = "Front Panel LED"; + gpios = <&PIO4 1>; + linux,default-trigger = "heartbeat"; + }; + green { + gpios = <&PIO1 3>; + default-state = "off"; + }; + }; + + ethernet1: dwmac@fef08000 { + snps,reset-gpio = <&PIO0 7>; + }; + }; +}; diff --git a/arch/arm/boot/dts/stih416-b2020.dts b/arch/arm/boot/dts/stih416-b2020.dts index 276f28da573a..4e2df66b99ea 100644 --- a/arch/arm/boot/dts/stih416-b2020.dts +++ b/arch/arm/boot/dts/stih416-b2020.dts @@ -11,6 +11,5 @@ #include "stih41x-b2020.dtsi" / { model = "STiH416 B2020"; - compatible = "st,stih416", "st,stih416-b2020"; - + compatible = "st,stih416-b2020", "st,stih416"; }; diff --git a/arch/arm/boot/dts/stih416-clock.dtsi b/arch/arm/boot/dts/stih416-clock.dtsi index a6942c75cbbb..5b4fb838cddb 100644 --- a/arch/arm/boot/dts/stih416-clock.dtsi +++ b/arch/arm/boot/dts/stih416-clock.dtsi @@ -6,50 +6,751 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ + +#include <dt-bindings/clock/stih416-clks.h> + / { clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + /* * Fixed 30MHz oscillator inputs to SoC */ - CLK_SYSIN: CLK_SYSIN { + clk_sysin: clk-sysin { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <30000000>; - clock-output-names = "CLK_SYSIN"; + }; + + /* + * ClockGenAs on SASG2 + */ + clockgen-a@fee62000 { + reg = <0xfee62000 0xb48>; + + clk_s_a0_pll: clk-s-a0-pll { + #clock-cells = <1>; + compatible = "st,clkgena-plls-c65"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-s-a0-pll0-hs", + "clk-s-a0-pll0-ls", + "clk-s-a0-pll1"; + }; + + clk_s_a0_osc_prediv: clk-s-a0-osc-prediv { + #clock-cells = <0>; + compatible = "st,clkgena-prediv-c65", + "st,clkgena-prediv"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-s-a0-osc-prediv"; + }; + + clk_s_a0_hs: clk-s-a0-hs { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c65-hs", + "st,clkgena-divmux"; + + clocks = <&clk_s_a0_osc_prediv>, + <&clk_s_a0_pll 0>, /* PLL0 HS */ + <&clk_s_a0_pll 2>; /* PLL1 */ + + clock-output-names = "clk-s-fdma-0", + "clk-s-fdma-1", + ""; /* clk-s-jit-sense */ + /* Fourth output unused */ + }; + + clk_s_a0_ls: clk-s-a0-ls { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c65-ls", + "st,clkgena-divmux"; + + clocks = <&clk_s_a0_osc_prediv>, + <&clk_s_a0_pll 1>, /* PLL0 LS */ + <&clk_s_a0_pll 2>; /* PLL1 */ + + clock-output-names = "clk-s-icn-reg-0", + "clk-s-icn-if-0", + "clk-s-icn-reg-lp-0", + "clk-s-emiss", + "clk-s-eth1-phy", + "clk-s-mii-ref-out"; + /* Remaining outputs unused */ + }; + }; + + clockgen-a@fee81000 { + reg = <0xfee81000 0xb48>; + + clk_s_a1_pll: clk-s-a1-pll { + #clock-cells = <1>; + compatible = "st,clkgena-plls-c65"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-s-a1-pll0-hs", + "clk-s-a1-pll0-ls", + "clk-s-a1-pll1"; + }; + + clk_s_a1_osc_prediv: clk-s-a1-osc-prediv { + #clock-cells = <0>; + compatible = "st,clkgena-prediv-c65", + "st,clkgena-prediv"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-s-a1-osc-prediv"; + }; + + clk_s_a1_hs: clk-s-a1-hs { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c65-hs", + "st,clkgena-divmux"; + + clocks = <&clk_s_a1_osc_prediv>, + <&clk_s_a1_pll 0>, /* PLL0 HS */ + <&clk_s_a1_pll 2>; /* PLL1 */ + + clock-output-names = "", /* Reserved */ + "", /* Reserved */ + "clk-s-stac-phy", + "clk-s-vtac-tx-phy"; + }; + + clk_s_a1_ls: clk-s-a1-ls { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c65-ls", + "st,clkgena-divmux"; + + clocks = <&clk_s_a1_osc_prediv>, + <&clk_s_a1_pll 1>, /* PLL0 LS */ + <&clk_s_a1_pll 2>; /* PLL1 */ + + clock-output-names = "clk-s-icn-if-2", + "clk-s-card-mmc-0", + "clk-s-icn-if-1", + "clk-s-gmac0-phy", + "clk-s-nand-ctrl", + "", /* Reserved */ + "clk-s-mii0-ref-out", + "clk-s-stac-sys", + "clk-s-card-mmc-1"; + /* Remaining outputs unused */ + }; + }; + + /* + * ClockGenAs on MPE42 + */ + clockgen-a@fde12000 { + reg = <0xfde12000 0xb50>; + + clk_m_a0_pll0: clk-m-a0-pll0 { + #clock-cells = <1>; + compatible = "st,plls-c32-a1x-0", "st,clkgen-plls-c32"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-m-a0-pll0-phi0", + "clk-m-a0-pll0-phi1", + "clk-m-a0-pll0-phi2", + "clk-m-a0-pll0-phi3"; + }; + + clk_m_a0_pll1: clk-m-a0-pll1 { + #clock-cells = <1>; + compatible = "st,plls-c32-a1x-1", "st,clkgen-plls-c32"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-m-a0-pll1-phi0", + "clk-m-a0-pll1-phi1", + "clk-m-a0-pll1-phi2", + "clk-m-a0-pll1-phi3"; + }; + + clk_m_a0_osc_prediv: clk-m-a0-osc-prediv { + #clock-cells = <0>; + compatible = "st,clkgena-prediv-c32", + "st,clkgena-prediv"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-m-a0-osc-prediv"; + }; + + clk_m_a0_div0: clk-m-a0-div0 { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c32-odf0", + "st,clkgena-divmux"; + + clocks = <&clk_m_a0_osc_prediv>, + <&clk_m_a0_pll0 0>, /* PLL0 PHI0 */ + <&clk_m_a0_pll1 0>; /* PLL1 PHI0 */ + + clock-output-names = "", /* Unused */ + "", /* Unused */ + "clk-m-fdma-12", + "", /* Unused */ + "clk-m-pp-dmu-0", + "clk-m-pp-dmu-1", + "clk-m-icm-lmi", + "clk-m-vid-dmu-0"; + }; + + clk_m_a0_div1: clk-m-a0-div1 { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c32-odf1", + "st,clkgena-divmux"; + + clocks = <&clk_m_a0_osc_prediv>, + <&clk_m_a0_pll0 1>, /* PLL0 PHI1 */ + <&clk_m_a0_pll1 1>; /* PLL1 PHI1 */ + + clock-output-names = "clk-m-vid-dmu-1", + "", /* Unused */ + "clk-m-a9-ext2f", + "clk-m-st40rt", + "clk-m-st231-dmu-0", + "clk-m-st231-dmu-1", + "clk-m-st231-aud", + "clk-m-st231-gp-0"; + }; + + clk_m_a0_div2: clk-m-a0-div2 { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c32-odf2", + "st,clkgena-divmux"; + + clocks = <&clk_m_a0_osc_prediv>, + <&clk_m_a0_pll0 2>, /* PLL0 PHI2 */ + <&clk_m_a0_pll1 2>; /* PLL1 PHI2 */ + + clock-output-names = "clk-m-st231-gp-1", + "clk-m-icn-cpu", + "clk-m-icn-stac", + "clk-m-tx-icn-dmu-0", + "clk-m-tx-icn-dmu-1", + "clk-m-tx-icn-ts", + "clk-m-icn-vdp-0", + "clk-m-icn-vdp-1"; + }; + + clk_m_a0_div3: clk-m-a0-div3 { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c32-odf3", + "st,clkgena-divmux"; + + clocks = <&clk_m_a0_osc_prediv>, + <&clk_m_a0_pll0 3>, /* PLL0 PHI3 */ + <&clk_m_a0_pll1 3>; /* PLL1 PHI3 */ + + clock-output-names = "", /* Unused */ + "", /* Unused */ + "", /* Unused */ + "", /* Unused */ + "clk-m-icn-vp8", + "", /* Unused */ + "clk-m-icn-reg-11", + "clk-m-a9-trace"; + }; + }; + + clockgen-a@fd6db000 { + reg = <0xfd6db000 0xb50>; + + clk_m_a1_pll0: clk-m-a1-pll0 { + #clock-cells = <1>; + compatible = "st,plls-c32-a1x-0", "st,clkgen-plls-c32"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-m-a1-pll0-phi0", + "clk-m-a1-pll0-phi1", + "clk-m-a1-pll0-phi2", + "clk-m-a1-pll0-phi3"; + }; + + clk_m_a1_pll1: clk-m-a1-pll1 { + #clock-cells = <1>; + compatible = "st,plls-c32-a1x-1", "st,clkgen-plls-c32"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-m-a1-pll1-phi0", + "clk-m-a1-pll1-phi1", + "clk-m-a1-pll1-phi2", + "clk-m-a1-pll1-phi3"; + }; + + clk_m_a1_osc_prediv: clk-m-a1-osc-prediv { + #clock-cells = <0>; + compatible = "st,clkgena-prediv-c32", + "st,clkgena-prediv"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-m-a1-osc-prediv"; + }; + + clk_m_a1_div0: clk-m-a1-div0 { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c32-odf0", + "st,clkgena-divmux"; + + clocks = <&clk_m_a1_osc_prediv>, + <&clk_m_a1_pll0 0>, /* PLL0 PHI0 */ + <&clk_m_a1_pll1 0>; /* PLL1 PHI0 */ + + clock-output-names = "", /* Unused */ + "clk-m-fdma-10", + "clk-m-fdma-11", + "clk-m-hva-alt", + "clk-m-proc-sc", + "clk-m-tp", + "clk-m-rx-icn-dmu-0", + "clk-m-rx-icn-dmu-1"; + }; + + clk_m_a1_div1: clk-m-a1-div1 { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c32-odf1", + "st,clkgena-divmux"; + + clocks = <&clk_m_a1_osc_prediv>, + <&clk_m_a1_pll0 1>, /* PLL0 PHI1 */ + <&clk_m_a1_pll1 1>; /* PLL1 PHI1 */ + + clock-output-names = "clk-m-rx-icn-ts", + "clk-m-rx-icn-vdp-0", + "", /* Unused */ + "clk-m-prv-t1-bus", + "clk-m-icn-reg-12", + "clk-m-icn-reg-10", + "", /* Unused */ + "clk-m-icn-st231"; + }; + + clk_m_a1_div2: clk-m-a1-div2 { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c32-odf2", + "st,clkgena-divmux"; + + clocks = <&clk_m_a1_osc_prediv>, + <&clk_m_a1_pll0 2>, /* PLL0 PHI2 */ + <&clk_m_a1_pll1 2>; /* PLL1 PHI2 */ + + clock-output-names = "clk-m-fvdp-proc-alt", + "clk-m-icn-reg-13", + "clk-m-tx-icn-gpu", + "clk-m-rx-icn-gpu", + "", /* Unused */ + "", /* Unused */ + "", /* clk-m-apb-pm-12 */ + ""; /* Unused */ + }; + + clk_m_a1_div3: clk-m-a1-div3 { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c32-odf3", + "st,clkgena-divmux"; + + clocks = <&clk_m_a1_osc_prediv>, + <&clk_m_a1_pll0 3>, /* PLL0 PHI3 */ + <&clk_m_a1_pll1 3>; /* PLL1 PHI3 */ + + clock-output-names = "", /* Unused */ + "", /* Unused */ + "", /* Unused */ + "", /* Unused */ + "", /* Unused */ + "", /* Unused */ + "", /* Unused */ + ""; /* clk-m-gpu-alt */ + }; + }; + + clk_m_a9_ext2f_div2: clk-m-a9-ext2f-div2 { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&clk_m_a0_div1 2>; + clock-div = <2>; + clock-mult = <1>; + }; + + clockgen-a@fd345000 { + reg = <0xfd345000 0xb50>; + + clk_m_a2_pll0: clk-m-a2-pll0 { + #clock-cells = <1>; + compatible = "st,plls-c32-a1x-0", "st,clkgen-plls-c32"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-m-a2-pll0-phi0", + "clk-m-a2-pll0-phi1", + "clk-m-a2-pll0-phi2", + "clk-m-a2-pll0-phi3"; + }; + + clk_m_a2_pll1: clk-m-a2-pll1 { + #clock-cells = <1>; + compatible = "st,plls-c32-a1x-1", "st,clkgen-plls-c32"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-m-a2-pll1-phi0", + "clk-m-a2-pll1-phi1", + "clk-m-a2-pll1-phi2", + "clk-m-a2-pll1-phi3"; + }; + + clk_m_a2_osc_prediv: clk-m-a2-osc-prediv { + #clock-cells = <0>; + compatible = "st,clkgena-prediv-c32", + "st,clkgena-prediv"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-m-a2-osc-prediv"; + }; + + clk_m_a2_div0: clk-m-a2-div0 { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c32-odf0", + "st,clkgena-divmux"; + + clocks = <&clk_m_a2_osc_prediv>, + <&clk_m_a2_pll0 0>, /* PLL0 PHI0 */ + <&clk_m_a2_pll1 0>; /* PLL1 PHI0 */ + + clock-output-names = "clk-m-vtac-main-phy", + "clk-m-vtac-aux-phy", + "clk-m-stac-phy", + "clk-m-stac-sys", + "", /* clk-m-mpestac-pg */ + "", /* clk-m-mpestac-wc */ + "", /* clk-m-mpevtacaux-pg*/ + ""; /* clk-m-mpevtacmain-pg*/ + }; + + clk_m_a2_div1: clk-m-a2-div1 { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c32-odf1", + "st,clkgena-divmux"; + + clocks = <&clk_m_a2_osc_prediv>, + <&clk_m_a2_pll0 1>, /* PLL0 PHI1 */ + <&clk_m_a2_pll1 1>; /* PLL1 PHI1 */ + + clock-output-names = "", /* clk-m-mpevtacrx0-wc */ + "", /* clk-m-mpevtacrx1-wc */ + "clk-m-compo-main", + "clk-m-compo-aux", + "clk-m-bdisp-0", + "clk-m-bdisp-1", + "clk-m-icn-bdisp", + "clk-m-icn-compo"; + }; + + clk_m_a2_div2: clk-m-a2-div2 { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c32-odf2", + "st,clkgena-divmux"; + + clocks = <&clk_m_a2_osc_prediv>, + <&clk_m_a2_pll0 2>, /* PLL0 PHI2 */ + <&clk_m_a2_pll1 2>; /* PLL1 PHI2 */ + + clock-output-names = "clk-m-icn-vdp-2", + "", /* Unused */ + "clk-m-icn-reg-14", + "clk-m-mdtp", + "clk-m-jpegdec", + "", /* Unused */ + "clk-m-dcephy-impctrl", + ""; /* Unused */ + }; + + clk_m_a2_div3: clk-m-a2-div3 { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c32-odf3", + "st,clkgena-divmux"; + + clocks = <&clk_m_a2_osc_prediv>, + <&clk_m_a2_pll0 3>, /* PLL0 PHI3 */ + <&clk_m_a2_pll1 3>; /* PLL1 PHI3 */ + + clock-output-names = "", /* Unused */ + ""; /* clk-m-apb-pm-11 */ + /* Remaining outputs unused */ + }; + }; + + /* + * A9 PLL + */ + clockgen-a9@fdde08b0 { + reg = <0xfdde08b0 0x70>; + + clockgen_a9_pll: clockgen-a9-pll { + #clock-cells = <1>; + compatible = "st,stih416-plls-c32-a9", "st,clkgen-plls-c32"; + + clocks = <&clk_sysin>; + clock-output-names = "clockgen-a9-pll-odf"; + }; + }; + + /* + * ARM CPU related clocks + */ + clk_m_a9: clk-m-a9@fdde08ac { + #clock-cells = <0>; + compatible = "st,stih416-clkgen-a9-mux", "st,clkgen-mux"; + reg = <0xfdde08ac 0x4>; + clocks = <&clockgen_a9_pll 0>, + <&clockgen_a9_pll 0>, + <&clk_m_a0_div1 2>, + <&clk_m_a9_ext2f_div2>; }; /* * ARM Peripheral clock for timers */ - arm_periph_clk: arm_periph_clk { + arm_periph_clk: clk-m-a9-periphs { #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <600000000>; + compatible = "fixed-factor-clock"; + clocks = <&clk_m_a9>; + clock-div = <2>; + clock-mult = <1>; }; /* - * Bootloader initialized system infrastructure clock for - * serial devices. + * Frequency synthesizers on the SASG2 */ - CLK_S_ICN_REG_0: clockgenA0@4 { + clockgen_b0: clockgen-b0@fee108b4 { + #clock-cells = <1>; + compatible = "st,stih416-quadfs216", "st,quadfs"; + reg = <0xfee108b4 0x44>; + + clocks = <&clk_sysin>; + clock-output-names = "clk-s-usb48", + "clk-s-dss", + "clk-s-stfe-frc-2", + "clk-s-thsens-scard"; + }; + + clockgen_b1: clockgen-b1@fe8308c4 { + #clock-cells = <1>; + compatible = "st,stih416-quadfs216", "st,quadfs"; + reg = <0xfe8308c4 0x44>; + + clocks = <&clk_sysin>; + clock-output-names = "clk-s-pcm-0", + "clk-s-pcm-1", + "clk-s-pcm-2", + "clk-s-pcm-3"; + }; + + clockgen_c: clockgen-c@fe8307d0 { + #clock-cells = <1>; + compatible = "st,stih416-quadfs432", "st,quadfs"; + reg = <0xfe8307d0 0x44>; + + clocks = <&clk_sysin>; + clock-output-names = "clk-s-c-fs0-ch0", + "clk-s-c-vcc-sd", + "clk-s-c-fs0-ch2"; + }; + + clk_s_vcc_hd: clk-s-vcc-hd@fe8308b8 { #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <100000000>; - clock-output-names = "CLK_S_ICN_REG_0"; + compatible = "st,stih416-clkgenc-vcc-hd", "st,clkgen-mux"; + reg = <0xfe8308b8 0x4>; /* SYSCFG2558 */ + + clocks = <&clk_sysin>, + <&clockgen_c 0>; }; - CLK_S_GMAC0_PHY: clockgenA1@7 { + /* + * Add a dummy clock for the HDMI PHY for the VCC input mux + */ + clk_s_tmds_fromphy: clk-s-tmds-fromphy { #clock-cells = <0>; compatible = "fixed-clock"; - clock-frequency = <25000000>; - clock-output-names = "CLK_S_GMAC0_PHY"; + clock-frequency = <0>; + }; + + clockgen_c_vcc: clockgen-c-vcc@fe8308ac { + #clock-cells = <1>; + compatible = "st,stih416-clkgenc", "st,clkgen-vcc"; + reg = <0xfe8308ac 0xc>; /* SYSCFG2555,2556,2557 */ + + clocks = <&clk_s_vcc_hd>, + <&clockgen_c 1>, + <&clk_s_tmds_fromphy>, + <&clockgen_c 2>; + + clock-output-names = "clk-s-pix-hdmi", + "clk-s-pix-dvo", + "clk-s-out-dvo", + "clk-s-pix-hd", + "clk-s-hddac", + "clk-s-denc", + "clk-s-sddac", + "clk-s-pix-main", + "clk-s-pix-aux", + "clk-s-stfe-frc-0", + "clk-s-ref-mcru", + "clk-s-slave-mcru", + "clk-s-tmds-hdmi", + "clk-s-hdmi-reject-pll", + "clk-s-thsens"; }; - CLK_S_ETH1_PHY: clockgenA0@7 { + clockgen_d: clockgen-d@fee107e0 { + #clock-cells = <1>; + compatible = "st,stih416-quadfs216", "st,quadfs"; + reg = <0xfee107e0 0x44>; + + clocks = <&clk_sysin>; + clock-output-names = "clk-s-ccsc", + "clk-s-stfe-frc-1", + "clk-s-tsout-1", + "clk-s-mchi"; + }; + + /* + * Frequency synthesizers on the MPE42 + */ + clockgen_e: clockgen-e@fd3208bc { + #clock-cells = <1>; + compatible = "st,stih416-quadfs660-E", "st,quadfs"; + reg = <0xfd3208bc 0xb0>; + + clocks = <&clk_sysin>; + clock-output-names = "clk-m-pix-mdtp-0", + "clk-m-pix-mdtp-1", + "clk-m-pix-mdtp-2", + "clk-m-mpelpc"; + }; + + clockgen_f: clockgen-f@fd320878 { + #clock-cells = <1>; + compatible = "st,stih416-quadfs660-F", "st,quadfs"; + reg = <0xfd320878 0xf0>; + + clocks = <&clk_sysin>; + clock-output-names = "clk-m-main-vidfs", + "clk-m-hva-fs", + "clk-m-fvdp-vcpu", + "clk-m-fvdp-proc-fs"; + }; + + clk_m_fvdp_proc: clk-m-fvdp-proc@fd320910 { + #clock-cells = <0>; + compatible = "st,stih416-clkgenf-vcc-fvdp", "st,clkgen-mux"; + reg = <0xfd320910 0x4>; /* SYSCFG8580 */ + + clocks = <&clk_m_a1_div2 0>, + <&clockgen_f 3>; + }; + + clk_m_hva: clk-m-hva@fd690868 { + #clock-cells = <0>; + compatible = "st,stih416-clkgenf-vcc-hva", "st,clkgen-mux"; + reg = <0xfd690868 0x4>; /* SYSCFG9538 */ + + clocks = <&clockgen_f 1>, + <&clk_m_a1_div0 3>; + }; + + clk_m_f_vcc_hd: clk-m-f-vcc-hd@fd32086c { + #clock-cells = <0>; + compatible = "st,stih416-clkgenf-vcc-hd", "st,clkgen-mux"; + reg = <0xfd32086c 0x4>; /* SYSCFG8539 */ + + clocks = <&clockgen_c_vcc 7>, + <&clockgen_f 0>; + }; + + clk_m_f_vcc_sd: clk-m-f-vcc-sd@fd32086c { + #clock-cells = <0>; + compatible = "st,stih416-clkgenf-vcc-sd", "st,clkgen-mux"; + reg = <0xfd32086c 0x4>; /* SYSCFG8539 */ + + clocks = <&clockgen_c_vcc 8>, + <&clockgen_f 1>; + }; + + /* + * Add a dummy clock for the HDMIRx external signal clock + */ + clk_m_pix_hdmirx_sas: clk-m-pix-hdmirx-sas { #clock-cells = <0>; compatible = "fixed-clock"; - clock-frequency = <25000000>; - clock-output-names = "CLK_S_ETH1_PHY"; + clock-frequency = <0>; + }; + + clockgen_f_vcc: clockgen-f-vcc@fd32086c { + #clock-cells = <1>; + compatible = "st,stih416-clkgenf", "st,clkgen-vcc"; + reg = <0xfd32086c 0xc>; /* SYSCFG8539,8540,8541 */ + + clocks = <&clk_m_f_vcc_hd>, + <&clk_m_f_vcc_sd>, + <&clockgen_f 0>, + <&clk_m_pix_hdmirx_sas>; + + clock-output-names = "clk-m-pix-main-pipe", + "clk-m-pix-aux-pipe", + "clk-m-pix-main-cru", + "clk-m-pix-aux-cru", + "clk-m-xfer-be-compo", + "clk-m-xfer-pip-compo", + "clk-m-xfer-aux-compo", + "clk-m-vsens", + "clk-m-pix-hdmirx-0", + "clk-m-pix-hdmirx-1"; + }; + + /* + * DDR PLL + */ + clockgen-ddr@0xfdde07d8 { + reg = <0xfdde07d8 0x110>; + + clockgen_ddr_pll: clockgen-ddr-pll { + #clock-cells = <1>; + compatible = "st,stih416-plls-c32-ddr", "st,clkgen-plls-c32"; + + clocks = <&clk_sysin>; + clock-output-names = "clockgen-ddr0", + "clockgen-ddr1"; + }; + }; + + /* + * GPU PLL + */ + clockgen-gpu@fd68ff00 { + reg = <0xfd68ff00 0x910>; + + clockgen_gpu_pll: clockgen-gpu-pll { + #clock-cells = <1>; + compatible = "st,stih416-gpu-pll-c32", "st,clkgengpu-pll-c32"; + + clocks = <&clk_sysin>; + clock-output-names = "clockgen-gpu-pll"; + }; }; }; }; diff --git a/arch/arm/boot/dts/stih416-pinctrl.dtsi b/arch/arm/boot/dts/stih416-pinctrl.dtsi index 250d5ecc951e..ee6c119e261e 100644 --- a/arch/arm/boot/dts/stih416-pinctrl.dtsi +++ b/arch/arm/boot/dts/stih416-pinctrl.dtsi @@ -122,6 +122,22 @@ }; }; + keyscan { + pinctrl_keyscan: keyscan { + st,pins { + keyin0 = <&PIO0 2 ALT2 IN>; + keyin1 = <&PIO0 3 ALT2 IN>; + keyin2 = <&PIO0 4 ALT2 IN>; + keyin3 = <&PIO2 6 ALT2 IN>; + + keyout0 = <&PIO1 6 ALT2 OUT>; + keyout1 = <&PIO1 7 ALT2 OUT>; + keyout2 = <&PIO0 6 ALT2 OUT>; + keyout3 = <&PIO2 7 ALT2 OUT>; + }; + }; + }; + sbc_i2c0 { pinctrl_sbc_i2c0_default: sbc_i2c0-default { st,pins { diff --git a/arch/arm/boot/dts/stih416.dtsi b/arch/arm/boot/dts/stih416.dtsi index 78746d20382e..06473c5d9ea9 100644 --- a/arch/arm/boot/dts/stih416.dtsi +++ b/arch/arm/boot/dts/stih416.dtsi @@ -89,7 +89,7 @@ status = "disabled"; reg = <0xfed32000 0x2c>; interrupts = <0 197 0>; - clocks = <&CLK_S_ICN_REG_0>; + clocks = <&clk_s_a0_ls CLK_ICN_REG>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_serial2 &pinctrl_serial2_oe>; }; @@ -102,14 +102,14 @@ interrupts = <0 210 0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sbc_serial1>; - clocks = <&CLK_SYSIN>; + clocks = <&clk_sysin>; }; i2c@fed40000 { compatible = "st,comms-ssc4-i2c"; reg = <0xfed40000 0x110>; interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&CLK_S_ICN_REG_0>; + clocks = <&clk_s_a0_ls CLK_ICN_REG>; clock-names = "ssc"; clock-frequency = <400000>; pinctrl-names = "default"; @@ -122,7 +122,7 @@ compatible = "st,comms-ssc4-i2c"; reg = <0xfed41000 0x110>; interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&CLK_S_ICN_REG_0>; + clocks = <&clk_s_a0_ls CLK_ICN_REG>; clock-names = "ssc"; clock-frequency = <400000>; pinctrl-names = "default"; @@ -135,7 +135,7 @@ compatible = "st,comms-ssc4-i2c"; reg = <0xfe540000 0x110>; interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&CLK_SYSIN>; + clocks = <&clk_sysin>; clock-names = "ssc"; clock-frequency = <400000>; pinctrl-names = "default"; @@ -148,7 +148,7 @@ compatible = "st,comms-ssc4-i2c"; reg = <0xfe541000 0x110>; interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&CLK_SYSIN>; + clocks = <&clk_sysin>; clock-names = "ssc"; clock-frequency = <400000>; pinctrl-names = "default"; @@ -176,7 +176,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mii0>; clock-names = "stmmaceth"; - clocks = <&CLK_S_GMAC0_PHY>; + clocks = <&clk_s_a1_ls CLK_GMAC0_PHY>; }; ethernet1: dwmac@fef08000 { @@ -198,7 +198,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mii1>; clock-names = "stmmaceth"; - clocks = <&CLK_S_ETH1_PHY>; + clocks = <&clk_s_a0_ls CLK_ETH1_PHY>; }; rc: rc@fe518000 { @@ -206,7 +206,7 @@ reg = <0xfe518000 0x234>; interrupts = <0 203 0>; rx-mode = "infrared"; - clocks = <&CLK_SYSIN>; + clocks = <&clk_sysin>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ir>; resets = <&softreset STIH416_IRB_SOFTRESET>; @@ -224,5 +224,17 @@ status = "disabled"; }; + + keyscan: keyscan@fe4b0000 { + compatible = "st,sti-keyscan"; + status = "disabled"; + reg = <0xfe4b0000 0x2000>; + interrupts = <GIC_SPI 212 IRQ_TYPE_NONE>; + clocks = <&clk_sysin>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_keyscan>; + resets = <&powerdown STIH416_KEYSCAN_POWERDOWN>, + <&softreset STIH416_KEYSCAN_SOFTRESET>; + }; }; }; diff --git a/arch/arm/boot/dts/stih41x-b2000.dtsi b/arch/arm/boot/dts/stih41x-b2000.dtsi index bf65c49095af..b3dd6ca5c2ae 100644 --- a/arch/arm/boot/dts/stih41x-b2000.dtsi +++ b/arch/arm/boot/dts/stih41x-b2000.dtsi @@ -6,6 +6,7 @@ * it under the terms of the GNU General Public License version 2 as * publishhed by the Free Software Foundation. */ +#include <dt-bindings/input/input.h> / { memory{ @@ -14,7 +15,7 @@ }; chosen { - bootargs = "console=ttyAS0,115200"; + bootargs = "console=ttyAS0,115200 clk_ignore_unused"; linux,stdout-path = &serial2; }; @@ -68,5 +69,27 @@ snps,reset-active-low; snps,reset-delays-us = <0 10000 10000>; }; + + keyscan: keyscan@fe4b0000 { + keypad,num-rows = <4>; + keypad,num-columns = <4>; + st,debounce-us = <5000>; + linux,keymap = < MATRIX_KEY(0x00, 0x00, KEY_F13) + MATRIX_KEY(0x00, 0x01, KEY_F9) + MATRIX_KEY(0x00, 0x02, KEY_F5) + MATRIX_KEY(0x00, 0x03, KEY_F1) + MATRIX_KEY(0x01, 0x00, KEY_F14) + MATRIX_KEY(0x01, 0x01, KEY_F10) + MATRIX_KEY(0x01, 0x02, KEY_F6) + MATRIX_KEY(0x01, 0x03, KEY_F2) + MATRIX_KEY(0x02, 0x00, KEY_F15) + MATRIX_KEY(0x02, 0x01, KEY_F11) + MATRIX_KEY(0x02, 0x02, KEY_F7) + MATRIX_KEY(0x02, 0x03, KEY_F3) + MATRIX_KEY(0x03, 0x00, KEY_F16) + MATRIX_KEY(0x03, 0x01, KEY_F12) + MATRIX_KEY(0x03, 0x02, KEY_F8) + MATRIX_KEY(0x03, 0x03, KEY_F4) >; + }; }; }; diff --git a/arch/arm/boot/dts/stih41x-b2020.dtsi b/arch/arm/boot/dts/stih41x-b2020.dtsi index 838513f9ddc0..d8a84295c328 100644 --- a/arch/arm/boot/dts/stih41x-b2020.dtsi +++ b/arch/arm/boot/dts/stih41x-b2020.dtsi @@ -14,7 +14,7 @@ }; chosen { - bootargs = "console=ttyAS0,115200"; + bootargs = "console=ttyAS0,115200 clk_ignore_unused"; linux,stdout-path = &sbc_serial1; }; diff --git a/arch/arm/boot/dts/stih41x.dtsi b/arch/arm/boot/dts/stih41x.dtsi index f5b9898d9c6e..5cb0e63376b5 100644 --- a/arch/arm/boot/dts/stih41x.dtsi +++ b/arch/arm/boot/dts/stih41x.dtsi @@ -1,3 +1,10 @@ +/* + * Copyright (C) 2014 STMicroelectronics Limited. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + */ / { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/sun4i-a10-a1000.dts index fa746aea5e66..0b97c071dd56 100644 --- a/arch/arm/boot/dts/sun4i-a10-a1000.dts +++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts @@ -36,6 +36,16 @@ }; }; + mmc0: mmc@01c0f000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-inverted; + status = "okay"; + }; + usbphy: phy@01c13400 { usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts index 4684cbe6843b..c200eacc66e8 100644 --- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts +++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts @@ -34,6 +34,16 @@ }; }; + mmc0: mmc@01c0f000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-inverted; + status = "okay"; + }; + usbphy: phy@01c13400 { usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; diff --git a/arch/arm/boot/dts/sun4i-a10-hackberry.dts b/arch/arm/boot/dts/sun4i-a10-hackberry.dts index d7c17e46ce23..547fadcb984b 100644 --- a/arch/arm/boot/dts/sun4i-a10-hackberry.dts +++ b/arch/arm/boot/dts/sun4i-a10-hackberry.dts @@ -36,6 +36,16 @@ }; }; + mmc0: mmc@01c0f000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-inverted; + status = "okay"; + }; + usbphy: phy@01c13400 { usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; diff --git a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts index fe9272ee55c3..f13723e18b86 100644 --- a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts +++ b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts @@ -24,6 +24,16 @@ }; soc@01c00000 { + mmc0: mmc@01c0f000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-inverted; + status = "okay"; + }; + uart0: serial@01c28000 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; diff --git a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts index dd84a9e313b3..c01cea50cf0c 100644 --- a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts +++ b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts @@ -20,6 +20,16 @@ compatible = "pineriver,mini-xplus", "allwinner,sun4i-a10"; soc@01c00000 { + mmc0: mmc@01c0f000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-inverted; + status = "okay"; + }; + usbphy: phy@01c13400 { usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; diff --git a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts index 66cf0c7cf5b7..d46a7dbecef5 100644 --- a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts +++ b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts @@ -33,6 +33,16 @@ }; }; + mmc0: mmc@01c0f000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-inverted; + status = "okay"; + }; + usbphy: phy@01c13400 { usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; diff --git a/arch/arm/boot/dts/sun4i-a10-pcduino.dts b/arch/arm/boot/dts/sun4i-a10-pcduino.dts index 255b47e7019c..fb03bccb78d2 100644 --- a/arch/arm/boot/dts/sun4i-a10-pcduino.dts +++ b/arch/arm/boot/dts/sun4i-a10-pcduino.dts @@ -34,6 +34,16 @@ }; }; + mmc0: mmc@01c0f000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-inverted; + status = "okay"; + }; + usbphy: phy@01c13400 { usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index 9174724571e2..c7b794ed337d 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -377,6 +377,42 @@ #size-cells = <0>; }; + mmc0: mmc@01c0f000 { + compatible = "allwinner,sun4i-a10-mmc"; + reg = <0x01c0f000 0x1000>; + clocks = <&ahb_gates 8>, <&mmc0_clk>; + clock-names = "ahb", "mmc"; + interrupts = <32>; + status = "disabled"; + }; + + mmc1: mmc@01c10000 { + compatible = "allwinner,sun4i-a10-mmc"; + reg = <0x01c10000 0x1000>; + clocks = <&ahb_gates 9>, <&mmc1_clk>; + clock-names = "ahb", "mmc"; + interrupts = <33>; + status = "disabled"; + }; + + mmc2: mmc@01c11000 { + compatible = "allwinner,sun4i-a10-mmc"; + reg = <0x01c11000 0x1000>; + clocks = <&ahb_gates 10>, <&mmc2_clk>; + clock-names = "ahb", "mmc"; + interrupts = <34>; + status = "disabled"; + }; + + mmc3: mmc@01c12000 { + compatible = "allwinner,sun4i-a10-mmc"; + reg = <0x01c12000 0x1000>; + clocks = <&ahb_gates 11>, <&mmc3_clk>; + clock-names = "ahb", "mmc"; + interrupts = <35>; + status = "disabled"; + }; + usbphy: phy@01c13400 { #phy-cells = <1>; compatible = "allwinner,sun4i-a10-usb-phy"; @@ -477,6 +513,20 @@ #size-cells = <0>; #gpio-cells = <3>; + pwm0_pins_a: pwm0@0 { + allwinner,pins = "PB2"; + allwinner,function = "pwm"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + pwm1_pins_a: pwm1@0 { + allwinner,pins = "PI3"; + allwinner,function = "pwm"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + uart0_pins_a: uart0@0 { allwinner,pins = "PB22", "PB23"; allwinner,function = "uart0"; @@ -529,6 +579,20 @@ allwinner,drive = <0>; allwinner,pull = <0>; }; + + mmc0_pins_a: mmc0@0 { + allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5"; + allwinner,function = "mmc0"; + allwinner,drive = <2>; + allwinner,pull = <0>; + }; + + mmc0_cd_pin_reference_design: mmc0_cd_pin@0 { + allwinner,pins = "PH1"; + allwinner,function = "gpio_in"; + allwinner,drive = <0>; + allwinner,pull = <1>; + }; }; timer@01c20c00 { @@ -549,6 +613,14 @@ interrupts = <24>; }; + pwm: pwm@01c20e00 { + compatible = "allwinner,sun4i-a10-pwm"; + reg = <0x01c20e00 0xc>; + clocks = <&osc24M>; + #pwm-cells = <3>; + status = "disabled"; + }; + sid: eeprom@01c23800 { compatible = "allwinner,sun4i-a10-sid"; reg = <0x01c23800 0x10>; @@ -647,6 +719,8 @@ clocks = <&apb1_gates 0>; clock-frequency = <100000>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; i2c1: i2c@01c2b000 { @@ -656,6 +730,8 @@ clocks = <&apb1_gates 1>; clock-frequency = <100000>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; i2c2: i2c@01c2b400 { @@ -665,6 +741,8 @@ clocks = <&apb1_gates 2>; clock-frequency = <100000>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; }; }; diff --git a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts index 23611b71d3aa..ea9519da5764 100644 --- a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts @@ -35,6 +35,26 @@ }; }; + mmc0: mmc@01c0f000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino_micro>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 6 1 0>; /* PG1 */ + cd-inverted; + status = "okay"; + }; + + mmc1: mmc@01c10000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins_a>, <&mmc1_cd_pin_olinuxino_micro>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 6 13 0>; /* PG13 */ + cd-inverted; + status = "okay"; + }; + usbphy: phy@01c13400 { usb1_vbus-supply = <®_usb1_vbus>; status = "okay"; @@ -49,6 +69,20 @@ }; pinctrl@01c20800 { + mmc0_cd_pin_olinuxino_micro: mmc0_cd_pin@0 { + allwinner,pins = "PG1"; + allwinner,function = "gpio_in"; + allwinner,drive = <0>; + allwinner,pull = <1>; + }; + + mmc1_cd_pin_olinuxino_micro: mmc1_cd_pin@0 { + allwinner,pins = "PG13"; + allwinner,function = "gpio_in"; + allwinner,drive = <0>; + allwinner,pull = <1>; + }; + led_pins_olinuxino: led_pins@0 { allwinner,pins = "PE3"; allwinner,function = "gpio_out"; diff --git a/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts b/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts new file mode 100644 index 000000000000..43a93762d4f2 --- /dev/null +++ b/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts @@ -0,0 +1,100 @@ +/* + * Copyright 2014 Hans de Goede <hdegoede@redhat.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "sun5i-a10s.dtsi" +/include/ "sunxi-common-regulators.dtsi" + +/ { + model = "R7 A10s hdmi tv-stick"; + compatible = "allwinner,r7-tv-dongle", "allwinner,sun5i-a10s"; + + soc@01c00000 { + mmc0: mmc@01c0f000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_r7>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 6 1 0>; /* PG1 */ + cd-inverted; + status = "okay"; + }; + + mmc1: mmc@01c10000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins_a>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + non-removable; + status = "okay"; + }; + + usbphy: phy@01c13400 { + usb1_vbus-supply = <®_usb1_vbus>; + status = "okay"; + }; + + ehci0: usb@01c14000 { + status = "okay"; + }; + + ohci0: usb@01c14400 { + status = "okay"; + }; + + pinctrl@01c20800 { + mmc0_cd_pin_r7: mmc0_cd_pin@0 { + allwinner,pins = "PG1"; + allwinner,function = "gpio_in"; + allwinner,drive = <0>; + allwinner,pull = <1>; + }; + + led_pins_r7: led_pins@0 { + allwinner,pins = "PB2"; + allwinner,function = "gpio_out"; + allwinner,drive = <1>; + allwinner,pull = <0>; + }; + + usb1_vbus_pin_r7: usb1_vbus_pin@0 { + allwinner,pins = "PG13"; + allwinner,function = "gpio_out"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + }; + + uart0: serial@01c28000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_r7>; + + green { + label = "r7-tv-dongle:green:usr"; + gpios = <&pio 1 2 0>; + default-state = "on"; + }; + }; + + reg_usb1_vbus: usb1-vbus { + pinctrl-0 = <&usb1_vbus_pin_r7>; + gpio = <&pio 6 13 0>; + status = "okay"; + }; +}; diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi index 79989ed5658d..aa1dd59dc34a 100644 --- a/arch/arm/boot/dts/sun5i-a10s.dtsi +++ b/arch/arm/boot/dts/sun5i-a10s.dtsi @@ -338,6 +338,33 @@ #size-cells = <0>; }; + mmc0: mmc@01c0f000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c0f000 0x1000>; + clocks = <&ahb_gates 8>, <&mmc0_clk>; + clock-names = "ahb", "mmc"; + interrupts = <32>; + status = "disabled"; + }; + + mmc1: mmc@01c10000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c10000 0x1000>; + clocks = <&ahb_gates 9>, <&mmc1_clk>; + clock-names = "ahb", "mmc"; + interrupts = <33>; + status = "disabled"; + }; + + mmc2: mmc@01c11000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c11000 0x1000>; + clocks = <&ahb_gates 10>, <&mmc2_clk>; + clock-names = "ahb", "mmc"; + interrupts = <34>; + status = "disabled"; + }; + usbphy: phy@01c13400 { #phy-cells = <1>; compatible = "allwinner,sun5i-a13-usb-phy"; @@ -451,6 +478,20 @@ allwinner,drive = <0>; allwinner,pull = <0>; }; + + mmc0_pins_a: mmc0@0 { + allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5"; + allwinner,function = "mmc0"; + allwinner,drive = <2>; + allwinner,pull = <0>; + }; + + mmc1_pins_a: mmc1@0 { + allwinner,pins = "PG3","PG4","PG5","PG6","PG7","PG8"; + allwinner,function = "mmc1"; + allwinner,drive = <2>; + allwinner,pull = <0>; + }; }; timer@01c20c00 { diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts index 11169d5b5b86..fa44b026483b 100644 --- a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts @@ -21,6 +21,16 @@ compatible = "olimex,a13-olinuxino-micro", "allwinner,sun5i-a13"; soc@01c00000 { + mmc0: mmc@01c0f000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxinom>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 6 0 0>; /* PG0 */ + cd-inverted; + status = "okay"; + }; + usbphy: phy@01c13400 { usb1_vbus-supply = <®_usb1_vbus>; status = "okay"; @@ -35,6 +45,13 @@ }; pinctrl@01c20800 { + mmc0_cd_pin_olinuxinom: mmc0_cd_pin@0 { + allwinner,pins = "PG0"; + allwinner,function = "gpio_in"; + allwinner,drive = <0>; + allwinner,pull = <1>; + }; + led_pins_olinuxinom: led_pins@0 { allwinner,pins = "PG9"; allwinner,function = "gpio_out"; diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts index 7a9187bbeb28..429994e1943e 100644 --- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts +++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts @@ -20,6 +20,16 @@ compatible = "olimex,a13-olinuxino", "allwinner,sun5i-a13"; soc@01c00000 { + mmc0: mmc@01c0f000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 6 0 0>; /* PG0 */ + cd-inverted; + status = "okay"; + }; + usbphy: phy@01c13400 { usb1_vbus-supply = <®_usb1_vbus>; status = "okay"; @@ -34,6 +44,13 @@ }; pinctrl@01c20800 { + mmc0_cd_pin_olinuxino: mmc0_cd_pin@0 { + allwinner,pins = "PG0"; + allwinner,function = "gpio_in"; + allwinner,drive = <0>; + allwinner,pull = <1>; + }; + led_pins_olinuxino: led_pins@0 { allwinner,pins = "PG9"; allwinner,function = "gpio_out"; diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi index f01c315bdc4b..c9fdb7b3ecd9 100644 --- a/arch/arm/boot/dts/sun5i-a13.dtsi +++ b/arch/arm/boot/dts/sun5i-a13.dtsi @@ -320,6 +320,24 @@ #size-cells = <0>; }; + mmc0: mmc@01c0f000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c0f000 0x1000>; + clocks = <&ahb_gates 8>, <&mmc0_clk>; + clock-names = "ahb", "mmc"; + interrupts = <32>; + status = "disabled"; + }; + + mmc2: mmc@01c11000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c11000 0x1000>; + clocks = <&ahb_gates 10>, <&mmc2_clk>; + clock-names = "ahb", "mmc"; + interrupts = <34>; + status = "disabled"; + }; + usbphy: phy@01c13400 { #phy-cells = <1>; compatible = "allwinner,sun5i-a13-usb-phy"; @@ -415,6 +433,13 @@ allwinner,drive = <0>; allwinner,pull = <0>; }; + + mmc0_pins_a: mmc0@0 { + allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5"; + allwinner,function = "mmc0"; + allwinner,drive = <2>; + allwinner,pull = <0>; + }; }; timer@01c20c00 { @@ -467,6 +492,8 @@ clocks = <&apb1_gates 0>; clock-frequency = <100000>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; i2c1: i2c@01c2b000 { @@ -476,6 +503,8 @@ clocks = <&apb1_gates 1>; clock-frequency = <100000>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; i2c2: i2c@01c2b400 { @@ -485,6 +514,8 @@ clocks = <&apb1_gates 2>; clock-frequency = <100000>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; timer@01c60000 { diff --git a/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts b/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts new file mode 100644 index 000000000000..2bbf8867362b --- /dev/null +++ b/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts @@ -0,0 +1,57 @@ +/* + * Copyright 2014 Boris Brezillon + * + * Boris Brezillon <boris.brezillon@free-electrons.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "sun6i-a31.dtsi" +/include/ "sunxi-common-regulators.dtsi" + +/ { + model = "Allwinner A31 APP4 EVB1 Evaluation Board"; + compatible = "allwinner,app4-evb1", "allwinner,sun6i-a31"; + + chosen { + bootargs = "earlyprintk console=ttyS0,115200"; + }; + + soc@01c00000 { + pio: pinctrl@01c20800 { + usb1_vbus_pin_a: usb1_vbus_pin@0 { + allwinner,pins = "PH27"; + allwinner,function = "gpio_out"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + }; + + usbphy: phy@01c19400 { + usb1_vbus-supply = <®_usb1_vbus>; + status = "okay"; + }; + + ehci0: usb@01c1a000 { + status = "okay"; + }; + + uart0: serial@01c28000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; + }; + }; + + reg_usb1_vbus: usb1-vbus { + pinctrl-0 = <&usb1_vbus_pin_a>; + gpio = <&pio 7 27 0>; + status = "okay"; + }; +}; diff --git a/arch/arm/boot/dts/sun6i-a31-colombus.dts b/arch/arm/boot/dts/sun6i-a31-colombus.dts index 3898a7bce831..546cf6eff5c7 100644 --- a/arch/arm/boot/dts/sun6i-a31-colombus.dts +++ b/arch/arm/boot/dts/sun6i-a31-colombus.dts @@ -13,6 +13,7 @@ /dts-v1/; /include/ "sun6i-a31.dtsi" +/include/ "sunxi-common-regulators.dtsi" / { model = "WITS A31 Colombus Evaluation Board"; @@ -23,6 +24,45 @@ }; soc@01c00000 { + mmc0: mmc@01c0f000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_colombus>; + vmmc-supply = <®_vcc3v0>; + bus-width = <4>; + cd-gpios = <&pio 0 8 0>; /* PA8 */ + cd-inverted; + status = "okay"; + }; + + usbphy: phy@01c19400 { + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; + }; + + ehci1: usb@01c1b000 { + status = "okay"; + }; + + pio: pinctrl@01c20800 { + mmc0_pins_a: mmc0@0 { + allwinner,pull = <1>; + }; + + mmc0_cd_pin_colombus: mmc0_cd_pin@0 { + allwinner,pins = "PA8"; + allwinner,function = "gpio_in"; + allwinner,drive = <0>; + allwinner,pull = <1>; + }; + + usb2_vbus_pin_colombus: usb2_vbus_pin@0 { + allwinner,pins = "PH24"; + allwinner,function = "gpio_out"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + }; + uart0: serial@01c28000 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; @@ -47,4 +87,11 @@ status = "okay"; }; }; + + reg_usb2_vbus: usb2-vbus { + pinctrl-names = "default"; + pinctrl-0 = <&usb2_vbus_pin_colombus>; + gpio = <&pio 7 24 0>; + status = "okay"; + }; }; diff --git a/arch/arm/boot/dts/sun6i-a31-m9.dts b/arch/arm/boot/dts/sun6i-a31-m9.dts new file mode 100644 index 000000000000..bc6115da5ae1 --- /dev/null +++ b/arch/arm/boot/dts/sun6i-a31-m9.dts @@ -0,0 +1,50 @@ +/* + * Copyright 2014 Hans de Goede <hdegoede@redhat.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "sun6i-a31.dtsi" +/include/ "sunxi-common-regulators.dtsi" + +/ { + model = "Mele M9 / A1000G Quad top set box"; + compatible = "mele,m9", "allwinner,sun6i-a31"; + + chosen { + bootargs = "earlyprintk console=ttyS0,115200"; + }; + + soc@01c00000 { + mmc0: mmc@01c0f000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_m9>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 22 0>; /* PH22 */ + cd-inverted; + status = "okay"; + }; + + pio: pinctrl@01c20800 { + mmc0_cd_pin_m9: mmc0_cd_pin@0 { + allwinner,pins = "PH22"; + allwinner,function = "gpio_in"; + allwinner,drive = <0>; + allwinner,pull = <1>; + }; + }; + + uart0: serial@01c28000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; + }; + }; +}; diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index d45efa74827c..0f4ea4990d2c 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -27,6 +27,7 @@ cpus { + enable-method = "allwinner,sun6i-a31"; #address-cells = <1>; #size-cells = <0>; @@ -59,6 +60,14 @@ reg = <0x40000000 0x80000000>; }; + pmu { + compatible = "arm,cortex-a7-pmu", "arm,cortex-a15-pmu"; + interrupts = <0 120 4>, + <0 121 4>, + <0 122 4>, + <0 123 4>; + }; + clocks { #address-cells = <1>; #size-cells = <1>; @@ -198,6 +207,38 @@ "apb2_uart4", "apb2_uart5"; }; + mmc0_clk: clk@01c20088 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c20088 0x4>; + clocks = <&osc24M>, <&pll6>; + clock-output-names = "mmc0"; + }; + + mmc1_clk: clk@01c2008c { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c2008c 0x4>; + clocks = <&osc24M>, <&pll6>; + clock-output-names = "mmc1"; + }; + + mmc2_clk: clk@01c20090 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c20090 0x4>; + clocks = <&osc24M>, <&pll6>; + clock-output-names = "mmc2"; + }; + + mmc3_clk: clk@01c20094 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c20094 0x4>; + clocks = <&osc24M>, <&pll6>; + clock-output-names = "mmc3"; + }; + spi0_clk: clk@01c200a0 { #clock-cells = <0>; compatible = "allwinner,sun4i-a10-mod0-clk"; @@ -229,6 +270,17 @@ clocks = <&osc24M>, <&pll6>; clock-output-names = "spi3"; }; + + usb_clk: clk@01c200cc { + #clock-cells = <1>; + #reset-cells = <1>; + compatible = "allwinner,sun6i-a31-usb-clk"; + reg = <0x01c200cc 0x4>; + clocks = <&osc24M>; + clock-output-names = "usb_phy0", "usb_phy1", "usb_phy2", + "usb_ohci0", "usb_ohci1", + "usb_ohci2"; + }; }; soc@01c00000 { @@ -237,12 +289,134 @@ #size-cells = <1>; ranges; - nmi_intc: interrupt-controller@01f00c0c { - compatible = "allwinner,sun6i-a31-sc-nmi"; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x01f00c0c 0x38>; - interrupts = <0 32 4>; + dma: dma-controller@01c02000 { + compatible = "allwinner,sun6i-a31-dma"; + reg = <0x01c02000 0x1000>; + interrupts = <0 50 4>; + clocks = <&ahb1_gates 6>; + resets = <&ahb1_rst 6>; + #dma-cells = <1>; + }; + + mmc0: mmc@01c0f000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c0f000 0x1000>; + clocks = <&ahb1_gates 8>, <&mmc0_clk>; + clock-names = "ahb", "mmc"; + resets = <&ahb1_rst 8>; + reset-names = "ahb"; + interrupts = <0 60 4>; + status = "disabled"; + }; + + mmc1: mmc@01c10000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c10000 0x1000>; + clocks = <&ahb1_gates 9>, <&mmc1_clk>; + clock-names = "ahb", "mmc"; + resets = <&ahb1_rst 9>; + reset-names = "ahb"; + interrupts = <0 61 4>; + status = "disabled"; + }; + + mmc2: mmc@01c11000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c11000 0x1000>; + clocks = <&ahb1_gates 10>, <&mmc2_clk>; + clock-names = "ahb", "mmc"; + resets = <&ahb1_rst 10>; + reset-names = "ahb"; + interrupts = <0 62 4>; + status = "disabled"; + }; + + mmc3: mmc@01c12000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c12000 0x1000>; + clocks = <&ahb1_gates 11>, <&mmc3_clk>; + clock-names = "ahb", "mmc"; + resets = <&ahb1_rst 11>; + reset-names = "ahb"; + interrupts = <0 63 4>; + status = "disabled"; + }; + + usbphy: phy@01c19400 { + compatible = "allwinner,sun6i-a31-usb-phy"; + reg = <0x01c19400 0x10>, + <0x01c1a800 0x4>, + <0x01c1b800 0x4>; + reg-names = "phy_ctrl", + "pmu1", + "pmu2"; + clocks = <&usb_clk 8>, + <&usb_clk 9>, + <&usb_clk 10>; + clock-names = "usb0_phy", + "usb1_phy", + "usb2_phy"; + resets = <&usb_clk 0>, + <&usb_clk 1>, + <&usb_clk 2>; + reset-names = "usb0_reset", + "usb1_reset", + "usb2_reset"; + status = "disabled"; + #phy-cells = <1>; + }; + + ehci0: usb@01c1a000 { + compatible = "allwinner,sun6i-a31-ehci", "generic-ehci"; + reg = <0x01c1a000 0x100>; + interrupts = <0 72 4>; + clocks = <&ahb1_gates 26>; + resets = <&ahb1_rst 26>; + phys = <&usbphy 1>; + phy-names = "usb"; + status = "disabled"; + }; + + ohci0: usb@01c1a400 { + compatible = "allwinner,sun6i-a31-ohci", "generic-ohci"; + reg = <0x01c1a400 0x100>; + interrupts = <0 73 4>; + clocks = <&ahb1_gates 29>, <&usb_clk 16>; + resets = <&ahb1_rst 29>; + phys = <&usbphy 1>; + phy-names = "usb"; + status = "disabled"; + }; + + ehci1: usb@01c1b000 { + compatible = "allwinner,sun6i-a31-ehci", "generic-ehci"; + reg = <0x01c1b000 0x100>; + interrupts = <0 74 4>; + clocks = <&ahb1_gates 27>; + resets = <&ahb1_rst 27>; + phys = <&usbphy 2>; + phy-names = "usb"; + status = "disabled"; + }; + + ohci1: usb@01c1b400 { + compatible = "allwinner,sun6i-a31-ohci", "generic-ohci"; + reg = <0x01c1b400 0x100>; + interrupts = <0 75 4>; + clocks = <&ahb1_gates 30>, <&usb_clk 17>; + resets = <&ahb1_rst 30>; + phys = <&usbphy 2>; + phy-names = "usb"; + status = "disabled"; + }; + + ohci2: usb@01c1c400 { + compatible = "allwinner,sun6i-a31-ohci", "generic-ohci"; + reg = <0x01c1c400 0x100>; + interrupts = <0 77 4>; + clocks = <&ahb1_gates 31>, <&usb_clk 18>; + resets = <&ahb1_rst 31>; + status = "disabled"; }; pio: pinctrl@01c20800 { @@ -286,6 +460,13 @@ allwinner,drive = <0>; allwinner,pull = <0>; }; + + mmc0_pins_a: mmc0@0 { + allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5"; + allwinner,function = "mmc0"; + allwinner,drive = <2>; + allwinner,pull = <0>; + }; }; ahb1_rst: reset@01c202c0 { @@ -330,6 +511,8 @@ reg-io-width = <4>; clocks = <&apb2_gates 16>; resets = <&apb2_rst 16>; + dmas = <&dma 6>, <&dma 6>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -341,6 +524,8 @@ reg-io-width = <4>; clocks = <&apb2_gates 17>; resets = <&apb2_rst 17>; + dmas = <&dma 7>, <&dma 7>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -352,6 +537,8 @@ reg-io-width = <4>; clocks = <&apb2_gates 18>; resets = <&apb2_rst 18>; + dmas = <&dma 8>, <&dma 8>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -363,6 +550,8 @@ reg-io-width = <4>; clocks = <&apb2_gates 19>; resets = <&apb2_rst 19>; + dmas = <&dma 9>, <&dma 9>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -374,6 +563,8 @@ reg-io-width = <4>; clocks = <&apb2_gates 20>; resets = <&apb2_rst 20>; + dmas = <&dma 10>, <&dma 10>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -385,6 +576,8 @@ reg-io-width = <4>; clocks = <&apb2_gates 21>; resets = <&apb2_rst 21>; + dmas = <&dma 22>, <&dma 22>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -434,6 +627,8 @@ interrupts = <0 65 4>; clocks = <&ahb1_gates 20>, <&spi0_clk>; clock-names = "ahb", "mod"; + dmas = <&dma 23>, <&dma 23>; + dma-names = "rx", "tx"; resets = <&ahb1_rst 20>; status = "disabled"; }; @@ -444,6 +639,8 @@ interrupts = <0 66 4>; clocks = <&ahb1_gates 21>, <&spi1_clk>; clock-names = "ahb", "mod"; + dmas = <&dma 24>, <&dma 24>; + dma-names = "rx", "tx"; resets = <&ahb1_rst 21>; status = "disabled"; }; @@ -454,6 +651,8 @@ interrupts = <0 67 4>; clocks = <&ahb1_gates 22>, <&spi2_clk>; clock-names = "ahb", "mod"; + dmas = <&dma 25>, <&dma 25>; + dma-names = "rx", "tx"; resets = <&ahb1_rst 22>; status = "disabled"; }; @@ -464,6 +663,8 @@ interrupts = <0 68 4>; clocks = <&ahb1_gates 23>, <&spi3_clk>; clock-names = "ahb", "mod"; + dmas = <&dma 26>, <&dma 26>; + dma-names = "rx", "tx"; resets = <&ahb1_rst 23>; status = "disabled"; }; @@ -479,14 +680,74 @@ interrupts = <1 9 0xf04>; }; + nmi_intc: interrupt-controller@01f00c0c { + compatible = "allwinner,sun6i-a31-sc-nmi"; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x01f00c0c 0x38>; + interrupts = <0 32 4>; + }; + + prcm@01f01400 { + compatible = "allwinner,sun6i-a31-prcm"; + reg = <0x01f01400 0x200>; + + ar100: ar100_clk { + compatible = "allwinner,sun6i-a31-ar100-clk"; + #clock-cells = <0>; + clocks = <&osc32k>, <&osc24M>, <&pll6>, <&pll6>; + clock-output-names = "ar100"; + }; + + ahb0: ahb0_clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <1>; + clocks = <&ar100>; + clock-output-names = "ahb0"; + }; + + apb0: apb0_clk { + compatible = "allwinner,sun6i-a31-apb0-clk"; + #clock-cells = <0>; + clocks = <&ahb0>; + clock-output-names = "apb0"; + }; + + apb0_gates: apb0_gates_clk { + compatible = "allwinner,sun6i-a31-apb0-gates-clk"; + #clock-cells = <1>; + clocks = <&apb0>; + clock-output-names = "apb0_pio", "apb0_ir", + "apb0_timer", "apb0_p2wi", + "apb0_uart", "apb0_1wire", + "apb0_i2c"; + }; + + apb0_rst: apb0_rst { + compatible = "allwinner,sun6i-a31-clock-reset"; + #reset-cells = <1>; + }; + }; + cpucfg@01f01c00 { compatible = "allwinner,sun6i-a31-cpuconfig"; reg = <0x01f01c00 0x300>; }; - prcm@01f01c00 { - compatible = "allwinner,sun6i-a31-prcm"; - reg = <0x01f01400 0x200>; + r_pio: pinctrl@01f02c00 { + compatible = "allwinner,sun6i-a31-r-pinctrl"; + reg = <0x01f02c00 0x400>; + interrupts = <0 45 4>, + <0 46 4>; + clocks = <&apb0_gates 0>; + resets = <&apb0_rst 0>; + gpio-controller; + interrupt-controller; + #address-cells = <1>; + #size-cells = <0>; + #gpio-cells = <3>; }; }; }; diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts index 68de89ffbdfa..a5ad945197e8 100644 --- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts +++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts @@ -20,6 +20,16 @@ compatible = "cubietech,cubieboard2", "allwinner,sun7i-a20"; soc@01c00000 { + mmc0: mmc@01c0f000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-inverted; + status = "okay"; + }; + usbphy: phy@01c13400 { usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts index cb25d3c8da58..b87fea901489 100644 --- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts +++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts @@ -20,6 +20,25 @@ compatible = "cubietech,cubietruck", "allwinner,sun7i-a20"; soc@01c00000 { + mmc0: mmc@01c0f000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-inverted; + status = "okay"; + }; + + mmc3: mmc@01c12000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_pins_a>; + vmmc-supply = <®_vmmc3>; + bus-width = <4>; + non-removable; + status = "okay"; + }; + usbphy: phy@01c13400 { usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; @@ -48,6 +67,18 @@ }; pinctrl@01c20800 { + mmc3_pins_a: mmc3@0 { + /* AP6210 requires pull-up */ + allwinner,pull = <1>; + }; + + vmmc3_pin_cubietruck: vmmc3_pin@0 { + allwinner,pins = "PH9"; + allwinner,function = "gpio_out"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + ahci_pwr_pin_cubietruck: ahci_pwr_pin@1 { allwinner,pins = "PH12"; allwinner,function = "gpio_out"; @@ -63,6 +94,12 @@ }; }; + pwm: pwm@01c20e00 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_pins_a>, <&pwm1_pins_a>; + status = "okay"; + }; + uart0: serial@01c28000 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; @@ -139,4 +176,15 @@ reg_usb2_vbus: usb2-vbus { status = "okay"; }; + + reg_vmmc3: vmmc3 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&vmmc3_pin_cubietruck>; + regulator-name = "vmmc3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&pio 7 9 0>; + }; }; diff --git a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts new file mode 100644 index 000000000000..b77308e90199 --- /dev/null +++ b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts @@ -0,0 +1,176 @@ +/* + * Copyright 2014 Hans de Goede <hdegoede@redhat.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "sun7i-a20.dtsi" +/include/ "sunxi-common-regulators.dtsi" + +/ { + model = "I12 / Q5 / QT840A A20 tvbox"; + compatible = "allwinner,i12-tvbox", "allwinner,sun7i-a20"; + + soc@01c00000 { + mmc0: mmc@01c0f000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-inverted; + status = "okay"; + }; + + mmc3: mmc@01c12000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_pins_a>; + vmmc-supply = <®_vmmc3>; + bus-width = <4>; + non-removable; + status = "okay"; + }; + + usbphy: phy@01c13400 { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; + }; + + ehci0: usb@01c14000 { + status = "okay"; + }; + + ohci0: usb@01c14400 { + status = "okay"; + }; + + ehci1: usb@01c1c000 { + status = "okay"; + }; + + ohci1: usb@01c1c400 { + status = "okay"; + }; + + pinctrl@01c20800 { + mmc3_pins_a: mmc3@0 { + /* AP6210 / AP6330 requires pull-up */ + allwinner,pull = <1>; + }; + + vmmc3_pin_i12_tvbox: vmmc3_pin@0 { + allwinner,pins = "PH2"; + allwinner,function = "gpio_out"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + vmmc3_io_pin_i12_tvbox: vmmc3_io_pin@0 { + allwinner,pins = "PH12"; + allwinner,function = "gpio_out"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + gmac_power_pin_i12_tvbox: gmac_power_pin@0 { + allwinner,pins = "PH21"; + allwinner,function = "gpio_out"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + led_pins_i12_tvbox: led_pins@0 { + allwinner,pins = "PH9", "PH20"; + allwinner,function = "gpio_out"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + }; + + uart0: serial@01c28000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; + }; + + gmac: ethernet@01c50000 { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_mii_a>; + phy = <&phy1>; + phy-mode = "mii"; + phy-supply = <®_gmac_3v3>; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_i12_tvbox>; + + red { + label = "i12_tvbox:red:usr"; + gpios = <&pio 7 9 1>; + }; + + blue { + label = "i12_tvbox:blue:usr"; + gpios = <&pio 7 20 0>; + }; + }; + + reg_usb1_vbus: usb1-vbus { + status = "okay"; + }; + + reg_usb2_vbus: usb2-vbus { + status = "okay"; + }; + + reg_vmmc3: vmmc3 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&vmmc3_pin_i12_tvbox>; + regulator-name = "vmmc3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&pio 7 2 0>; + }; + + reg_vmmc3_io: vmmc3-io { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&vmmc3_io_pin_i12_tvbox>; + regulator-name = "vmmc3-io"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + /* This controls VCC-PI, must be always on! */ + regulator-always-on; + enable-active-high; + gpio = <&pio 7 12 0>; + }; + + reg_gmac_3v3: gmac-3v3 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&gmac_power_pin_i12_tvbox>; + regulator-name = "gmac-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <50000>; + enable-active-high; + gpio = <&pio 7 21 0>; + }; +}; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts index eeadf76362fa..b759630bc9a9 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts @@ -31,6 +31,26 @@ status = "okay"; }; + mmc0: mmc@01c0f000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-inverted; + status = "okay"; + }; + + mmc3: mmc@01c12000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_pins_a>, <&mmc3_cd_pin_olinuxinom>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 11 0>; /* PH11 */ + cd-inverted; + status = "okay"; + }; + usbphy: phy@01c13400 { usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; @@ -65,6 +85,13 @@ }; pinctrl@01c20800 { + mmc3_cd_pin_olinuxinom: mmc3_cd_pin@0 { + allwinner,pins = "PH11"; + allwinner,function = "gpio_in"; + allwinner,drive = <0>; + allwinner,pull = <1>; + }; + led_pins_olinuxino: led_pins@0 { allwinner,pins = "PH2"; allwinner,function = "gpio_out"; diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index aba1c8a3f388..385933bac114 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -57,6 +57,12 @@ <1 10 0xf08>; }; + pmu { + compatible = "arm,cortex-a7-pmu", "arm,cortex-a15-pmu"; + interrupts = <0 120 4>, + <0 121 4>; + }; + clocks { #address-cells = <1>; #size-cells = <1>; @@ -455,6 +461,42 @@ #size-cells = <0>; }; + mmc0: mmc@01c0f000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c0f000 0x1000>; + clocks = <&ahb_gates 8>, <&mmc0_clk>; + clock-names = "ahb", "mmc"; + interrupts = <0 32 4>; + status = "disabled"; + }; + + mmc1: mmc@01c10000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c10000 0x1000>; + clocks = <&ahb_gates 9>, <&mmc1_clk>; + clock-names = "ahb", "mmc"; + interrupts = <0 33 4>; + status = "disabled"; + }; + + mmc2: mmc@01c11000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c11000 0x1000>; + clocks = <&ahb_gates 10>, <&mmc2_clk>; + clock-names = "ahb", "mmc"; + interrupts = <0 34 4>; + status = "disabled"; + }; + + mmc3: mmc@01c12000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c12000 0x1000>; + clocks = <&ahb_gates 11>, <&mmc3_clk>; + clock-names = "ahb", "mmc"; + interrupts = <0 35 4>; + status = "disabled"; + }; + usbphy: phy@01c13400 { #phy-cells = <1>; compatible = "allwinner,sun7i-a20-usb-phy"; @@ -548,6 +590,20 @@ #size-cells = <0>; #gpio-cells = <3>; + pwm0_pins_a: pwm0@0 { + allwinner,pins = "PB2"; + allwinner,function = "pwm"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + pwm1_pins_a: pwm1@0 { + allwinner,pins = "PI3"; + allwinner,function = "pwm"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + uart0_pins_a: uart0@0 { allwinner,pins = "PB22", "PB23"; allwinner,function = "uart0"; @@ -661,6 +717,27 @@ allwinner,drive = <0>; allwinner,pull = <0>; }; + + mmc0_pins_a: mmc0@0 { + allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5"; + allwinner,function = "mmc0"; + allwinner,drive = <2>; + allwinner,pull = <0>; + }; + + mmc0_cd_pin_reference_design: mmc0_cd_pin@0 { + allwinner,pins = "PH1"; + allwinner,function = "gpio_in"; + allwinner,drive = <0>; + allwinner,pull = <1>; + }; + + mmc3_pins_a: mmc3@0 { + allwinner,pins = "PI4","PI5","PI6","PI7","PI8","PI9"; + allwinner,function = "mmc3"; + allwinner,drive = <2>; + allwinner,pull = <0>; + }; }; timer@01c20c00 { @@ -686,6 +763,14 @@ interrupts = <0 24 4>; }; + pwm: pwm@01c20e00 { + compatible = "allwinner,sun7i-a20-pwm"; + reg = <0x01c20e00 0xc>; + clocks = <&osc24M>; + #pwm-cells = <3>; + status = "disabled"; + }; + sid: eeprom@01c23800 { compatible = "allwinner,sun7i-a20-sid"; reg = <0x01c23800 0x200>; @@ -784,6 +869,8 @@ clocks = <&apb1_gates 0>; clock-frequency = <100000>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; i2c1: i2c@01c2b000 { @@ -793,6 +880,8 @@ clocks = <&apb1_gates 1>; clock-frequency = <100000>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; i2c2: i2c@01c2b400 { @@ -802,6 +891,8 @@ clocks = <&apb1_gates 2>; clock-frequency = <100000>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; i2c3: i2c@01c2b800 { @@ -811,6 +902,8 @@ clocks = <&apb1_gates 3>; clock-frequency = <100000>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; i2c4: i2c@01c2c000 { @@ -820,6 +913,8 @@ clocks = <&apb1_gates 15>; clock-frequency = <100000>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; gmac: ethernet@01c50000 { diff --git a/arch/arm/boot/dts/sunxi-common-regulators.dtsi b/arch/arm/boot/dts/sunxi-common-regulators.dtsi index 18eeac0670b9..3d021efd1a38 100644 --- a/arch/arm/boot/dts/sunxi-common-regulators.dtsi +++ b/arch/arm/boot/dts/sunxi-common-regulators.dtsi @@ -72,4 +72,18 @@ gpio = <&pio 7 3 0>; status = "disabled"; }; + + reg_vcc3v0: vcc3v0 { + compatible = "regulator-fixed"; + regulator-name = "vcc3v0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + reg_vcc3v3: vcc3v3 { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; }; diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts index a288a12823ed..5c21d216515a 100644 --- a/arch/arm/boot/dts/tegra114-dalmore.dts +++ b/arch/arm/boot/dts/tegra114-dalmore.dts @@ -25,6 +25,7 @@ hdmi@54280000 { status = "okay"; + hdmi-supply = <&vdd_5v0_hdmi>; vdd-supply = <&vdd_hdmi_reg>; pll-supply = <&palmas_smps3_reg>; @@ -36,6 +37,8 @@ dsi@54300000 { status = "okay"; + avdd-dsi-csi-supply = <&avdd_1v2_reg>; + panel@0 { compatible = "panasonic,vvx10f004b00", "simple-panel"; @@ -982,12 +985,10 @@ regulator-max-microvolt = <2800000>; }; - ldo3 { + avdd_1v2_reg: ldo3 { regulator-name = "avdd-dsi-csi"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; - regulator-always-on; - regulator-boot-on; }; ldo4 { @@ -1105,6 +1106,7 @@ sdhci@78000400 { cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_HIGH>; bus-width = <4>; status = "okay"; }; @@ -1231,8 +1233,6 @@ regulator-name = "vdd_hdmi_5v0"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - enable-active-high; - gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>; vin-supply = <&tps65090_dcdc1_reg>; }; @@ -1245,6 +1245,17 @@ enable-active-high; gpio = <&palmas_gpio 6 0>; }; + + vdd_5v0_hdmi: regulator@7 { + compatible = "regulator-fixed"; + reg = <7>; + regulator-name = "VDD_5V0_HDMI_CON"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&tps65090_dcdc1_reg>; + }; }; sound { diff --git a/arch/arm/boot/dts/tegra114-roth.dts b/arch/arm/boot/dts/tegra114-roth.dts new file mode 100644 index 000000000000..0b0e8e07d965 --- /dev/null +++ b/arch/arm/boot/dts/tegra114-roth.dts @@ -0,0 +1,1113 @@ +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include "tegra114.dtsi" + +/ { + model = "NVIDIA SHIELD"; + compatible = "nvidia,roth", "nvidia,tegra114"; + + chosen { + /* SHIELD's bootloader's arguments need to be overridden */ + bootargs = "console=ttyS0,115200n8 console=tty1 gpt fbcon=rotate:1"; + /* SHIELD's bootloader will place initrd at this address */ + linux,initrd-start = <0x82000000>; + linux,initrd-end = <0x82800000>; + }; + + firmware { + trusted-foundations { + compatible = "tlm,trusted-foundations"; + tlm,version-major = <2>; + tlm,version-minor = <8>; + }; + }; + + memory { + /* memory >= 0x79600000 is reserved for firmware usage */ + reg = <0x80000000 0x79600000>; + }; + + pinmux@70000868 { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + clk1_out_pw4 { + nvidia,pins = "clk1_out_pw4"; + nvidia,function = "extperiph1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap1_din_pn1 { + nvidia,pins = "dap1_din_pn1"; + nvidia,function = "i2s0"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap1_dout_pn2 { + nvidia,pins = "dap1_dout_pn2", + "dap1_fs_pn0", + "dap1_sclk_pn3"; + nvidia,function = "i2s0"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap2_din_pa4 { + nvidia,pins = "dap2_din_pa4"; + nvidia,function = "i2s1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap2_dout_pa5 { + nvidia,pins = "dap2_dout_pa5", + "dap2_fs_pa2", + "dap2_sclk_pa3"; + nvidia,function = "i2s1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap4_din_pp5 { + nvidia,pins = "dap4_din_pp5", + "dap4_dout_pp6", + "dap4_fs_pp4", + "dap4_sclk_pp7"; + nvidia,function = "i2s3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dvfs_pwm_px0 { + nvidia,pins = "dvfs_pwm_px0", + "dvfs_clk_px2"; + nvidia,function = "cldvfs"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ulpi_clk_py0 { + nvidia,pins = "ulpi_clk_py0", + "ulpi_data0_po1", + "ulpi_data1_po2", + "ulpi_data2_po3", + "ulpi_data3_po4", + "ulpi_data4_po5", + "ulpi_data5_po6", + "ulpi_data6_po7", + "ulpi_data7_po0"; + nvidia,function = "ulpi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + ulpi_dir_py1 { + nvidia,pins = "ulpi_dir_py1", + "ulpi_nxt_py2"; + nvidia,function = "ulpi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + ulpi_stp_py3 { + nvidia,pins = "ulpi_stp_py3"; + nvidia,function = "ulpi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + cam_i2c_scl_pbb1 { + nvidia,pins = "cam_i2c_scl_pbb1", + "cam_i2c_sda_pbb2"; + nvidia,function = "i2c3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + cam_mclk_pcc0 { + nvidia,pins = "cam_mclk_pcc0", + "pbb0"; + nvidia,function = "vi_alt3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + }; + pbb4 { + nvidia,pins = "pbb4"; + nvidia,function = "vgp4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + }; + gen2_i2c_scl_pt5 { + nvidia,pins = "gen2_i2c_scl_pt5", + "gen2_i2c_sda_pt6"; + nvidia,function = "i2c2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + gmi_a16_pj7 { + nvidia,pins = "gmi_a16_pj7", + "gmi_a19_pk7"; + nvidia,function = "uartd"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi_a17_pb0 { + nvidia,pins = "gmi_a17_pb0", + "gmi_a18_pb1"; + nvidia,function = "uartd"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gmi_ad5_pg5 { + nvidia,pins = "gmi_ad5_pg5", + "gmi_wr_n_pi0"; + nvidia,function = "spi4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gmi_ad6_pg6 { + nvidia,pins = "gmi_ad6_pg6", + "gmi_ad7_pg7"; + nvidia,function = "spi4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gmi_ad12_ph4 { + nvidia,pins = "gmi_ad12_ph4"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi_cs6_n_pi13 { + nvidia,pins = "gmi_cs6_n_pi3"; + nvidia,function = "nand"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi_ad9_ph1 { + nvidia,pins = "gmi_ad9_ph1"; + nvidia,function = "pwm1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi_cs1_n_pj2 { + nvidia,pins = "gmi_cs1_n_pj2", + "gmi_oe_n_pi1"; + nvidia,function = "soc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gmi_rst_n_pi4 { + nvidia,pins = "gmi_rst_n_pi4"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gmi_iordy_pi5 { + nvidia,pins = "gmi_iordy_pi5"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + clk2_out_pw5 { + nvidia,pins = "clk2_out_pw5"; + nvidia,function = "extperiph2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc1_clk_pz0 { + nvidia,pins = "sdmmc1_clk_pz0"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + sdmmc1_cmd_pz1 { + nvidia,pins = "sdmmc1_cmd_pz1", + "sdmmc1_dat0_py7", + "sdmmc1_dat1_py6", + "sdmmc1_dat2_py5", + "sdmmc1_dat3_py4"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc3_clk_pa6 { + nvidia,pins = "sdmmc3_clk_pa6"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + sdmmc3_cmd_pa7 { + nvidia,pins = "sdmmc3_cmd_pa7", + "sdmmc3_dat0_pb7", + "sdmmc3_dat1_pb6", + "sdmmc3_dat2_pb5", + "sdmmc3_dat3_pb4", + "sdmmc3_cd_n_pv2", + "sdmmc3_clk_lb_out_pee4", + "sdmmc3_clk_lb_in_pee5"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_col4_pq4 { + nvidia,pins = "kb_col4_pq4"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc4_clk_pcc4 { + nvidia,pins = "sdmmc4_clk_pcc4"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + sdmmc4_cmd_pt7 { + nvidia,pins = "sdmmc4_cmd_pt7", + "sdmmc4_dat0_paa0", + "sdmmc4_dat1_paa1", + "sdmmc4_dat2_paa2", + "sdmmc4_dat3_paa3", + "sdmmc4_dat4_paa4", + "sdmmc4_dat5_paa5", + "sdmmc4_dat6_paa6", + "sdmmc4_dat7_paa7"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + clk_32k_out_pa0 { + nvidia,pins = "clk_32k_out_pa0"; + nvidia,function = "blink"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_col0_pq0 { + nvidia,pins = "kb_col0_pq0", + "kb_col1_pq1", + "kb_col2_pq2", + "kb_row0_pr0", + "kb_row1_pr1", + "kb_row2_pr2", + "kb_row8_ps0"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_row7_pr7 { + nvidia,pins = "kb_row7_pr7"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_row10_ps2 { + nvidia,pins = "kb_row10_ps2"; + nvidia,function = "uarta"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_row9_ps1 { + nvidia,pins = "kb_row9_ps1"; + nvidia,function = "uarta"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pwr_i2c_scl_pz6 { + nvidia,pins = "pwr_i2c_scl_pz6", + "pwr_i2c_sda_pz7"; + nvidia,function = "i2cpwr"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + sys_clk_req_pz5 { + nvidia,pins = "sys_clk_req_pz5"; + nvidia,function = "sysclk"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + core_pwr_req { + nvidia,pins = "core_pwr_req"; + nvidia,function = "pwron"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + cpu_pwr_req { + nvidia,pins = "cpu_pwr_req"; + nvidia,function = "cpu"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pwr_int_n { + nvidia,pins = "pwr_int_n"; + nvidia,function = "pmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + reset_out_n { + nvidia,pins = "reset_out_n"; + nvidia,function = "reset_out_n"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + clk3_out_pee0 { + nvidia,pins = "clk3_out_pee0"; + nvidia,function = "extperiph3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gen1_i2c_scl_pc4 { + nvidia,pins = "gen1_i2c_scl_pc4", + "gen1_i2c_sda_pc5"; + nvidia,function = "i2c1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + uart2_cts_n_pj5 { + nvidia,pins = "uart2_cts_n_pj5"; + nvidia,function = "uartb"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + uart2_rts_n_pj6 { + nvidia,pins = "uart2_rts_n_pj6"; + nvidia,function = "uartb"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + uart2_rxd_pc3 { + nvidia,pins = "uart2_rxd_pc3"; + nvidia,function = "irda"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + uart2_txd_pc2 { + nvidia,pins = "uart2_txd_pc2"; + nvidia,function = "irda"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + uart3_cts_n_pa1 { + nvidia,pins = "uart3_cts_n_pa1", + "uart3_rxd_pw7"; + nvidia,function = "uartc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + uart3_rts_n_pc0 { + nvidia,pins = "uart3_rts_n_pc0", + "uart3_txd_pw6"; + nvidia,function = "uartc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + owr { + nvidia,pins = "owr"; + nvidia,function = "owr"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + hdmi_cec_pee3 { + nvidia,pins = "hdmi_cec_pee3"; + nvidia,function = "cec"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + ddc_scl_pv4 { + nvidia,pins = "ddc_scl_pv4", + "ddc_sda_pv5"; + nvidia,function = "i2c4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + nvidia,rcv-sel = <TEGRA_PIN_ENABLE>; + }; + spdif_in_pk6 { + nvidia,pins = "spdif_in_pk6"; + nvidia,function = "usb"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + }; + usb_vbus_en0_pn4 { + nvidia,pins = "usb_vbus_en0_pn4"; + nvidia,function = "usb"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + gpio_x6_aud_px6 { + nvidia,pins = "gpio_x6_aud_px6"; + nvidia,function = "spi6"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gpio_x1_aud_px1 { + nvidia,pins = "gpio_x1_aud_px1"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gpio_x7_aud_px7 { + nvidia,pins = "gpio_x7_aud_px7"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gmi_adv_n_pk0 { + nvidia,pins = "gmi_adv_n_pk0"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gmi_cs0_n_pj0 { + nvidia,pins = "gmi_cs0_n_pj0"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pu3 { + nvidia,pins = "pu3"; + nvidia,function = "pwm0"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gpio_x4_aud_px4 { + nvidia,pins = "gpio_x4_aud_px4", + "gpio_x5_aud_px5"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gpio_x3_aud_px3 { + nvidia,pins = "gpio_x3_aud_px3"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gpio_w2_aud_pw2 { + nvidia,pins = "gpio_w2_aud_pw2"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gpio_w3_aud_pw3 { + nvidia,pins = "gpio_w3_aud_pw3"; + nvidia,function = "spi6"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap3_fs_pp0 { + nvidia,pins = "dap3_fs_pp0", + "dap3_din_pp1", + "dap3_dout_pp2", + "dap3_sclk_pp3"; + nvidia,function = "i2s2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pv0 { + nvidia,pins = "pv0"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pv1 { + nvidia,pins = "pv1"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pbb3 { + nvidia,pins = "pbb3", + "pbb5", + "pbb6", + "pbb7"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pcc1 { + nvidia,pins = "pcc1", + "pcc2"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gmi_ad0_pg0 { + nvidia,pins = "gmi_ad0_pg0", + "gmi_ad1_pg1"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi_ad10_ph2 { + nvidia,pins = "gmi_ad10_ph2", + "gmi_ad12_ph4", + "gmi_ad15_ph7", + "gmi_cs3_n_pk4"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi_ad11_ph3 { + nvidia,pins = "gmi_ad11_ph3", + "gmi_ad13_ph5", + "gmi_ad8_ph0", + "gmi_clk_pk1", + "gmi_cs2_n_pk3"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi_ad14_ph6 { + nvidia,pins = "gmi_ad14_ph6", + "gmi_cs0_n_pj0", + "gmi_cs4_n_pk2", + "gmi_cs7_n_pi6", + "gmi_dqs_p_pj3", + "gmi_wp_n_pc7"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gmi_ad2_pg2 { + nvidia,pins = "gmi_ad2_pg2", + "gmi_ad3_pg3"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc1_wp_n_pv3 { + nvidia,pins = "sdmmc1_wp_n_pv3"; + nvidia,function = "spi4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + clk2_req_pcc5 { + nvidia,pins = "clk2_req_pcc5"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_col3_pq3 { + nvidia,pins = "kb_col3_pq3"; + nvidia,function = "pwm2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_col5_pq5 { + nvidia,pins = "kb_col5_pq5"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_col6_pq6 { + nvidia,pins = "kb_col6_pq6", + "kb_col7_pq7"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row3_pr3 { + nvidia,pins = "kb_row3_pr3", + "kb_row4_pr4", + "kb_row6_pr6"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + clk3_req_pee1 { + nvidia,pins = "clk3_req_pee1"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pu2 { + nvidia,pins = "pu2"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + hdmi_int_pn7 { + nvidia,pins = "hdmi_int_pn7"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + drive_sdio1 { + nvidia,pins = "drive_sdio1"; + nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>; + nvidia,schmitt = <TEGRA_PIN_DISABLE>; + nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>; + nvidia,pull-down-strength = <36>; + nvidia,pull-up-strength = <20>; + nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOW>; + nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOW>; + }; + drive_sdio3 { + nvidia,pins = "drive_sdio3"; + nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>; + nvidia,schmitt = <TEGRA_PIN_DISABLE>; + nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>; + nvidia,pull-down-strength = <36>; + nvidia,pull-up-strength = <20>; + nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>; + nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>; + }; + drive_gma { + nvidia,pins = "drive_gma"; + nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>; + nvidia,schmitt = <TEGRA_PIN_DISABLE>; + nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>; + nvidia,pull-down-strength = <2>; + nvidia,pull-up-strength = <2>; + nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>; + nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>; + nvidia,drive-type = <1>; + }; + }; + }; + + /* Usable on reworked devices only */ + serial@70006300 { + status = "okay"; + }; + + pwm@7000a000 { + status = "okay"; + }; + + i2c@7000d000 { + status = "okay"; + clock-frequency = <400000>; + + regulator@43 { + compatible = "ti,tps51632"; + reg = <0x43>; + regulator-name = "vdd-cpu"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1520000>; + regulator-always-on; + regulator-boot-on; + }; + + palmas: pmic@58 { + compatible = "ti,palmas"; + reg = <0x58>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>; + + #interrupt-cells = <2>; + interrupt-controller; + + ti,system-power-controller; + + palmas_gpio: gpio { + compatible = "ti,palmas-gpio"; + gpio-controller; + #gpio-cells = <2>; + }; + + pmic { + compatible = "ti,tps65913-pmic", "ti,palmas-pmic"; + + regulators { + smps12 { + regulator-name = "vdd-ddr"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_1v8: smps3 { + regulator-name = "vdd-1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + smps457 { + regulator-name = "vdd-soc"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + }; + + smps8 { + regulator-name = "avdd-pll-1v05"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + regulator-always-on; + regulator-boot-on; + }; + + smps9 { + regulator-name = "vdd-2v85-emmc"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + smps10_out1 { + regulator-name = "vdd-fan"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + smps10_out2 { + regulator-name = "vdd-5v0-sys"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo2 { + regulator-name = "vdd-2v8-display"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-boot-on; + }; + + ldo3 { + regulator-name = "avdd-1v2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo4 { + regulator-name = "vpp-fuse"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo5 { + regulator-name = "avdd-hdmi-pll"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + ldo6 { + regulator-name = "vdd-sensor-2v8"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + ldo8 { + regulator-name = "vdd-rtc"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + ti,enable-ldo8-tracking; + }; + + vddio_sdmmc3: ldo9 { + regulator-name = "vddio-sdmmc3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + ldousb { + regulator-name = "avdd-usb-hdmi"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_3v3_sys: regen1 { + regulator-name = "rail-3v3"; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + regen2 { + regulator-name = "rail-5v0"; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + }; + }; + + rtc { + compatible = "ti,palmas-rtc"; + interrupt-parent = <&palmas>; + interrupts = <8 0>; + }; + + }; + }; + + pmc@7000e400 { + nvidia,invert-interrupt; + }; + + /* SD card */ + sdhci@78000400 { + status = "okay"; + bus-width = <4>; + vmmc-supply = <&vddio_sdmmc3>; + cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>; + power-gpios = <&gpio TEGRA_GPIO(H, 0) GPIO_ACTIVE_HIGH>; + }; + + /* eMMC */ + sdhci@78000600 { + status = "okay"; + bus-width = <8>; + vmmc-supply = <&vdd_1v8>; + non-removable; + }; + + /* External USB port (must be powered) */ + usb@7d000000 { + status = "okay"; + }; + + usb-phy@7d000000 { + status = "okay"; + nvidia,xcvr-setup = <7>; + nvidia,xcvr-lsfslew = <2>; + nvidia,xcvr-lsrslew = <2>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + /* Should be changed to "otg" once we have vbus_supply */ + /* As of now, USB devices need to be powered externally */ + dr_mode = "host"; + }; + + /* SHIELD controller */ + usb@7d008000 { + status = "okay"; + }; + + usb-phy@7d008000 { + status = "okay"; + nvidia,xcvr-setup = <7>; + nvidia,xcvr-lsfslew = <2>; + nvidia,xcvr-lsrslew = <2>; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 1 40000>; + + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + + power-supply = <&lcd_bl_en>; + enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>; + }; + + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + clk32k_in: clock { + compatible = "fixed-clock"; + reg=<0>; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + back { + label = "Back"; + gpios = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_LOW>; + linux,code = <KEY_BACK>; + }; + + home { + label = "Home"; + gpios = <&gpio TEGRA_GPIO(R, 1) GPIO_ACTIVE_LOW>; + linux,code = <KEY_HOME>; + }; + + power { + label = "Power"; + gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + gpio-key,wakeup; + }; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + lcd_bl_en: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "lcd_bl_en"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + }; + + regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "vdd_lcd_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vdd_1v8>; + enable-active-high; + gpio = <&gpio TEGRA_GPIO(U, 4) GPIO_ACTIVE_HIGH>; + regulator-boot-on; + }; + + regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "vdd_1v8_ts"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio TEGRA_GPIO(K, 3) GPIO_ACTIVE_LOW>; + regulator-boot-on; + }; + + regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "vdd_3v3_ts"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&gpio TEGRA_GPIO(H, 5) GPIO_ACTIVE_HIGH>; + regulator-boot-on; + }; + + regulator@4 { + compatible = "regulator-fixed"; + reg = <4>; + regulator-name = "vdd_1v8_com"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vdd_1v8>; + enable-active-high; + gpio = <&gpio TEGRA_GPIO(X, 1) GPIO_ACTIVE_HIGH>; + regulator-boot-on; + }; + + regulator@5 { + compatible = "regulator-fixed"; + reg = <5>; + regulator-name = "vdd_3v3_com"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vdd_3v3_sys>; + enable-active-high; + gpio = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_HIGH>; + regulator-always-on; + regulator-boot-on; + }; + }; +}; diff --git a/arch/arm/boot/dts/tegra114-tn7.dts b/arch/arm/boot/dts/tegra114-tn7.dts new file mode 100644 index 000000000000..963662145635 --- /dev/null +++ b/arch/arm/boot/dts/tegra114-tn7.dts @@ -0,0 +1,348 @@ +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include "tegra114.dtsi" + +/ { + model = "Tegra Note 7"; + compatible = "nvidia,tn7", "nvidia,tegra114"; + + chosen { + /* TN7's bootloader's arguments need to be overridden */ + bootargs = "console=ttyS0,115200n8 console=tty1 gpt fbcon=rotate:2"; + /* TN7's bootloader will place initrd at this address */ + linux,initrd-start = <0x82000000>; + linux,initrd-end = <0x82800000>; + }; + + firmware { + trusted-foundations { + compatible = "tlm,trusted-foundations"; + tlm,version-major = <2>; + tlm,version-minor = <8>; + }; + }; + + memory { + /* memory >= 0x37e00000 is reserved for firmware usage */ + reg = <0x80000000 0x37e00000>; + }; + + host1x@50000000 { + dsi@54300000 { + status = "okay"; + + vdd-supply = <&vdd_1v2_ap>; + + panel@0 { + compatible = "lg,ld070wx3-sl01"; + reg = <0>; + + power-supply = <&vdd_lcd>; + backlight = <&backlight>; + }; + }; + }; + + serial@70006300 { + status = "okay"; + }; + + pwm@7000a000 { + status = "okay"; + }; + + i2c@7000d000 { + status = "okay"; + clock-frequency = <400000>; + + palmas: pmic@58 { + compatible = "ti,palmas"; + reg = <0x58>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>; + + #interrupt-cells = <2>; + interrupt-controller; + + ti,system-power-controller; + + palmas_gpio: gpio { + compatible = "ti,palmas-gpio"; + gpio-controller; + #gpio-cells = <2>; + }; + + pmic { + compatible = "ti,tps65913-pmic", "ti,palmas-pmic"; + + ldoln-in-supply = <&vdd_smps10_out2>; + + regulators { + smps123 { + regulator-name = "vd-cpu"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + }; + + smps45 { + regulator-name = "vd-soc"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + }; + + smps6 { + regulator-name = "va-lcd-hv"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-boot-on; + }; + + smps7 { + regulator-name = "vd-ddr"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_1v8: smps8 { + regulator-name = "vs-pmu-1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_2v9_sys: smps9 { + regulator-name = "vs-sys-2v9"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_smps10_out1: smps10_out1 { + regulator-name = "vd-smps10-out1"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_smps10_out2: smps10_out2 { + regulator-name = "vd-smps10-out2"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo1 { + regulator-name = "va-pllx"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_1v2_ap: ldo2 { + regulator-name = "va-ap-1v2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo3 { + regulator-name = "vd-fuse"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo4 { + regulator-name = "vd-ts-hv"; + regulator-min-microvolt = <3200000>; + regulator-max-microvolt = <3200000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo5 { + regulator-name = "va-cam2-hv"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + ldo6 { + regulator-name = "va-sns-hv"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + ldo7 { + regulator-name = "va-cam1-hv"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + ldo8 { + regulator-name = "va-ap-rtc"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + ti,enable-ldo8-tracking; + regulator-always-on; + regulator-boot-on; + }; + + ldo9 { + regulator-name = "vi-sdcard"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + }; + + ldousb { + regulator-name = "avdd-usb"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + ldoln { + regulator-name = "va-hdmi"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + }; + }; + + rtc { + compatible = "ti,palmas-rtc"; + interrupt-parent = <&palmas>; + interrupts = <8 0>; + }; + + }; + }; + + pmc@7000e400 { + nvidia,invert-interrupt; + }; + + /* eMMC */ + sdhci@78000600 { + status = "okay"; + bus-width = <8>; + vmmc-supply = <&vdd_1v8>; + non-removable; + }; + + usb@7d000000 { + status = "okay"; + }; + + usb-phy@7d000000 { + status = "okay"; + nvidia,xcvr-setup = <7>; + nvidia,xcvr-lsfslew = <2>; + nvidia,xcvr-lsrslew = <2>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + /* Should be changed to "otg" once we have vbus_supply */ + /* As of now, USB devices need to be powered externally */ + dr_mode = "host"; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 1 40000>; + + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + + power-supply = <&lcd_bl_en>; + }; + + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + clk32k_in: clock { + compatible = "fixed-clock"; + reg = <0>; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + power { + label = "Power"; + gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + gpio-key,wakeup; + }; + + volume_down { + label = "Volume Down"; + gpios = <&gpio TEGRA_GPIO(Q, 2) GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEDOWN>; + }; + + volume_up { + label = "Volume Up"; + gpios = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + /* FIXME: output of BQ24192 */ + vs_sys: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "VS_SYS"; + regulator-min-microvolt = <4200000>; + regulator-max-microvolt = <4200000>; + regulator-always-on; + regulator-boot-on; + }; + + lcd_bl_en: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "VDD_LCD_BL"; + regulator-min-microvolt = <16500000>; + regulator-max-microvolt = <16500000>; + gpio = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vs_sys>; + regulator-boot-on; + }; + + vdd_lcd: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "VD_LCD_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&palmas_gpio 4 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_1v8>; + regulator-boot-on; + }; + }; +}; diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts new file mode 100644 index 000000000000..e31fb61a81d3 --- /dev/null +++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts @@ -0,0 +1,1827 @@ +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include "tegra124.dtsi" + +/ { + model = "NVIDIA Tegra124 Jetson TK1"; + compatible = "nvidia,jetson-tk1", "nvidia,tegra124"; + + aliases { + rtc0 = "/i2c@0,7000d000/pmic@40"; + rtc1 = "/rtc@0,7000e000"; + }; + + memory { + reg = <0x0 0x80000000 0x0 0x80000000>; + }; + + host1x@0,50000000 { + hdmi@0,54280000 { + status = "okay"; + + hdmi-supply = <&vdd_5v0_hdmi>; + pll-supply = <&vdd_hdmi_pll>; + vdd-supply = <&vdd_3v3_hdmi>; + + nvidia,ddc-i2c-bus = <&hdmi_ddc>; + nvidia,hpd-gpio = + <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>; + }; + }; + + pinmux: pinmux@0,70000868 { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + clk_32k_out_pa0 { + nvidia,pins = "clk_32k_out_pa0"; + nvidia,function = "soc"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + uart3_cts_n_pa1 { + nvidia,pins = "uart3_cts_n_pa1"; + nvidia,function = "uartc"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap2_fs_pa2 { + nvidia,pins = "dap2_fs_pa2"; + nvidia,function = "i2s1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap2_sclk_pa3 { + nvidia,pins = "dap2_sclk_pa3"; + nvidia,function = "i2s1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap2_din_pa4 { + nvidia,pins = "dap2_din_pa4"; + nvidia,function = "i2s1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap2_dout_pa5 { + nvidia,pins = "dap2_dout_pa5"; + nvidia,function = "i2s1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc3_clk_pa6 { + nvidia,pins = "sdmmc3_clk_pa6"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + sdmmc3_cmd_pa7 { + nvidia,pins = "sdmmc3_cmd_pa7"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pb0 { + nvidia,pins = "pb0"; + nvidia,function = "uartd"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pb1 { + nvidia,pins = "pb1"; + nvidia,function = "uartd"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc3_dat3_pb4 { + nvidia,pins = "sdmmc3_dat3_pb4"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc3_dat2_pb5 { + nvidia,pins = "sdmmc3_dat2_pb5"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc3_dat1_pb6 { + nvidia,pins = "sdmmc3_dat1_pb6"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc3_dat0_pb7 { + nvidia,pins = "sdmmc3_dat0_pb7"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + uart3_rts_n_pc0 { + nvidia,pins = "uart3_rts_n_pc0"; + nvidia,function = "uartc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + uart2_txd_pc2 { + nvidia,pins = "uart2_txd_pc2"; + nvidia,function = "irda"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + uart2_rxd_pc3 { + nvidia,pins = "uart2_rxd_pc3"; + nvidia,function = "irda"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gen1_i2c_scl_pc4 { + nvidia,pins = "gen1_i2c_scl_pc4"; + nvidia,function = "i2c1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + gen1_i2c_sda_pc5 { + nvidia,pins = "gen1_i2c_sda_pc5"; + nvidia,function = "i2c1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + pc7 { + nvidia,pins = "pc7"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pg0 { + nvidia,pins = "pg0"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pg1 { + nvidia,pins = "pg1"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pg2 { + nvidia,pins = "pg2"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pg3 { + nvidia,pins = "pg3"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pg4 { + nvidia,pins = "pg4"; + nvidia,function = "spi4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pg5 { + nvidia,pins = "pg5"; + nvidia,function = "spi4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pg6 { + nvidia,pins = "pg6"; + nvidia,function = "spi4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pg7 { + nvidia,pins = "pg7"; + nvidia,function = "spi4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + ph0 { + nvidia,pins = "ph0"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ph1 { + nvidia,pins = "ph1"; + nvidia,function = "pwm1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ph2 { + nvidia,pins = "ph2"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ph3 { + nvidia,pins = "ph3"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ph4 { + nvidia,pins = "ph4"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + ph5 { + nvidia,pins = "ph5"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ph6 { + nvidia,pins = "ph6"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + ph7 { + nvidia,pins = "ph7"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pi0 { + nvidia,pins = "pi0"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pi1 { + nvidia,pins = "pi1"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pi2 { + nvidia,pins = "pi2"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pi3 { + nvidia,pins = "pi3"; + nvidia,function = "spi4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pi4 { + nvidia,pins = "pi4"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pi5 { + nvidia,pins = "pi5"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pi6 { + nvidia,pins = "pi6"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pi7 { + nvidia,pins = "pi7"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pj0 { + nvidia,pins = "pj0"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pj2 { + nvidia,pins = "pj2"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + uart2_cts_n_pj5 { + nvidia,pins = "uart2_cts_n_pj5"; + nvidia,function = "uartb"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + uart2_rts_n_pj6 { + nvidia,pins = "uart2_rts_n_pj6"; + nvidia,function = "uartb"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pj7 { + nvidia,pins = "pj7"; + nvidia,function = "uartd"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pk0 { + nvidia,pins = "pk0"; + nvidia,function = "soc"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pk1 { + nvidia,pins = "pk1"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pk2 { + nvidia,pins = "pk2"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pk3 { + nvidia,pins = "pk3"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pk4 { + nvidia,pins = "pk4"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + spdif_out_pk5 { + nvidia,pins = "spdif_out_pk5"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + spdif_in_pk6 { + nvidia,pins = "spdif_in_pk6"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pk7 { + nvidia,pins = "pk7"; + nvidia,function = "uartd"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap1_fs_pn0 { + nvidia,pins = "dap1_fs_pn0"; + nvidia,function = "i2s0"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap1_din_pn1 { + nvidia,pins = "dap1_din_pn1"; + nvidia,function = "i2s0"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap1_dout_pn2 { + nvidia,pins = "dap1_dout_pn2"; + nvidia,function = "sata"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap1_sclk_pn3 { + nvidia,pins = "dap1_sclk_pn3"; + nvidia,function = "i2s0"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + usb_vbus_en0_pn4 { + nvidia,pins = "usb_vbus_en0_pn4"; + nvidia,function = "usb"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + usb_vbus_en1_pn5 { + nvidia,pins = "usb_vbus_en1_pn5"; + nvidia,function = "usb"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + hdmi_int_pn7 { + nvidia,pins = "hdmi_int_pn7"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,rcv-sel = <TEGRA_PIN_DISABLE>; + }; + ulpi_data7_po0 { + nvidia,pins = "ulpi_data7_po0"; + nvidia,function = "ulpi"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + ulpi_data0_po1 { + nvidia,pins = "ulpi_data0_po1"; + nvidia,function = "ulpi"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + ulpi_data1_po2 { + nvidia,pins = "ulpi_data1_po2"; + nvidia,function = "ulpi"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + ulpi_data2_po3 { + nvidia,pins = "ulpi_data2_po3"; + nvidia,function = "ulpi"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + ulpi_data3_po4 { + nvidia,pins = "ulpi_data3_po4"; + nvidia,function = "ulpi"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + ulpi_data4_po5 { + nvidia,pins = "ulpi_data4_po5"; + nvidia,function = "ulpi"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + ulpi_data5_po6 { + nvidia,pins = "ulpi_data5_po6"; + nvidia,function = "ulpi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ulpi_data6_po7 { + nvidia,pins = "ulpi_data6_po7"; + nvidia,function = "ulpi"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap3_fs_pp0 { + nvidia,pins = "dap3_fs_pp0"; + nvidia,function = "i2s2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap3_din_pp1 { + nvidia,pins = "dap3_din_pp1"; + nvidia,function = "i2s2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap3_dout_pp2 { + nvidia,pins = "dap3_dout_pp2"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap3_sclk_pp3 { + nvidia,pins = "dap3_sclk_pp3"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap4_fs_pp4 { + nvidia,pins = "dap4_fs_pp4"; + nvidia,function = "i2s3"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap4_din_pp5 { + nvidia,pins = "dap4_din_pp5"; + nvidia,function = "i2s3"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap4_dout_pp6 { + nvidia,pins = "dap4_dout_pp6"; + nvidia,function = "i2s3"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap4_sclk_pp7 { + nvidia,pins = "dap4_sclk_pp7"; + nvidia,function = "i2s3"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_col0_pq0 { + nvidia,pins = "kb_col0_pq0"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_col1_pq1 { + nvidia,pins = "kb_col1_pq1"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_col2_pq2 { + nvidia,pins = "kb_col2_pq2"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_col3_pq3 { + nvidia,pins = "kb_col3_pq3"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_col4_pq4 { + nvidia,pins = "kb_col4_pq4"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_col5_pq5 { + nvidia,pins = "kb_col5_pq5"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_col6_pq6 { + nvidia,pins = "kb_col6_pq6"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_col7_pq7 { + nvidia,pins = "kb_col7_pq7"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_row0_pr0 { + nvidia,pins = "kb_row0_pr0"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row1_pr1 { + nvidia,pins = "kb_row1_pr1"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row2_pr2 { + nvidia,pins = "kb_row2_pr2"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row3_pr3 { + nvidia,pins = "kb_row3_pr3"; + nvidia,function = "sys"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row4_pr4 { + nvidia,pins = "kb_row4_pr4"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_row5_pr5 { + nvidia,pins = "kb_row5_pr5"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row6_pr6 { + nvidia,pins = "kb_row6_pr6"; + nvidia,function = "displaya_alt"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_row7_pr7 { + nvidia,pins = "kb_row7_pr7"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_row8_ps0 { + nvidia,pins = "kb_row8_ps0"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_row9_ps1 { + nvidia,pins = "kb_row9_ps1"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row10_ps2 { + nvidia,pins = "kb_row10_ps2"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_row11_ps3 { + nvidia,pins = "kb_row11_ps3"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row12_ps4 { + nvidia,pins = "kb_row12_ps4"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row13_ps5 { + nvidia,pins = "kb_row13_ps5"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_row14_ps6 { + nvidia,pins = "kb_row14_ps6"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row15_ps7 { + nvidia,pins = "kb_row15_ps7"; + nvidia,function = "soc"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_row16_pt0 { + nvidia,pins = "kb_row16_pt0"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row17_pt1 { + nvidia,pins = "kb_row17_pt1"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gen2_i2c_scl_pt5 { + nvidia,pins = "gen2_i2c_scl_pt5"; + nvidia,function = "i2c2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + gen2_i2c_sda_pt6 { + nvidia,pins = "gen2_i2c_sda_pt6"; + nvidia,function = "i2c2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + sdmmc4_cmd_pt7 { + nvidia,pins = "sdmmc4_cmd_pt7"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pu0 { + nvidia,pins = "pu0"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pu1 { + nvidia,pins = "pu1"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pu2 { + nvidia,pins = "pu2"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pu3 { + nvidia,pins = "pu3"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pu4 { + nvidia,pins = "pu4"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pu5 { + nvidia,pins = "pu5"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pu6 { + nvidia,pins = "pu6"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pv0 { + nvidia,pins = "pv0"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pv1 { + nvidia,pins = "pv1"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc3_cd_n_pv2 { + nvidia,pins = "sdmmc3_cd_n_pv2"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc1_wp_n_pv3 { + nvidia,pins = "sdmmc1_wp_n_pv3"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ddc_scl_pv4 { + nvidia,pins = "ddc_scl_pv4"; + nvidia,function = "i2c4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,rcv-sel = <TEGRA_PIN_DISABLE>; + }; + ddc_sda_pv5 { + nvidia,pins = "ddc_sda_pv5"; + nvidia,function = "i2c4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,rcv-sel = <TEGRA_PIN_DISABLE>; + }; + gpio_w2_aud_pw2 { + nvidia,pins = "gpio_w2_aud_pw2"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gpio_w3_aud_pw3 { + nvidia,pins = "gpio_w3_aud_pw3"; + nvidia,function = "spi6"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap_mclk1_pw4 { + nvidia,pins = "dap_mclk1_pw4"; + nvidia,function = "extperiph1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + clk2_out_pw5 { + nvidia,pins = "clk2_out_pw5"; + nvidia,function = "extperiph2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + uart3_txd_pw6 { + nvidia,pins = "uart3_txd_pw6"; + nvidia,function = "uartc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + uart3_rxd_pw7 { + nvidia,pins = "uart3_rxd_pw7"; + nvidia,function = "uartc"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dvfs_pwm_px0 { + nvidia,pins = "dvfs_pwm_px0"; + nvidia,function = "cldvfs"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gpio_x1_aud_px1 { + nvidia,pins = "gpio_x1_aud_px1"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dvfs_clk_px2 { + nvidia,pins = "dvfs_clk_px2"; + nvidia,function = "cldvfs"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gpio_x3_aud_px3 { + nvidia,pins = "gpio_x3_aud_px3"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gpio_x4_aud_px4 { + nvidia,pins = "gpio_x4_aud_px4"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gpio_x5_aud_px5 { + nvidia,pins = "gpio_x5_aud_px5"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gpio_x6_aud_px6 { + nvidia,pins = "gpio_x6_aud_px6"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gpio_x7_aud_px7 { + nvidia,pins = "gpio_x7_aud_px7"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ulpi_clk_py0 { + nvidia,pins = "ulpi_clk_py0"; + nvidia,function = "spi1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ulpi_dir_py1 { + nvidia,pins = "ulpi_dir_py1"; + nvidia,function = "spi1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + ulpi_nxt_py2 { + nvidia,pins = "ulpi_nxt_py2"; + nvidia,function = "spi1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ulpi_stp_py3 { + nvidia,pins = "ulpi_stp_py3"; + nvidia,function = "spi1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + sdmmc1_dat3_py4 { + nvidia,pins = "sdmmc1_dat3_py4"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc1_dat2_py5 { + nvidia,pins = "sdmmc1_dat2_py5"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc1_dat1_py6 { + nvidia,pins = "sdmmc1_dat1_py6"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc1_dat0_py7 { + nvidia,pins = "sdmmc1_dat0_py7"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc1_clk_pz0 { + nvidia,pins = "sdmmc1_clk_pz0"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc1_cmd_pz1 { + nvidia,pins = "sdmmc1_cmd_pz1"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pwr_i2c_scl_pz6 { + nvidia,pins = "pwr_i2c_scl_pz6"; + nvidia,function = "i2cpwr"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + pwr_i2c_sda_pz7 { + nvidia,pins = "pwr_i2c_sda_pz7"; + nvidia,function = "i2cpwr"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + sdmmc4_dat0_paa0 { + nvidia,pins = "sdmmc4_dat0_paa0"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc4_dat1_paa1 { + nvidia,pins = "sdmmc4_dat1_paa1"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc4_dat2_paa2 { + nvidia,pins = "sdmmc4_dat2_paa2"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc4_dat3_paa3 { + nvidia,pins = "sdmmc4_dat3_paa3"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc4_dat4_paa4 { + nvidia,pins = "sdmmc4_dat4_paa4"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc4_dat5_paa5 { + nvidia,pins = "sdmmc4_dat5_paa5"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc4_dat6_paa6 { + nvidia,pins = "sdmmc4_dat6_paa6"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc4_dat7_paa7 { + nvidia,pins = "sdmmc4_dat7_paa7"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pbb0 { + nvidia,pins = "pbb0"; + nvidia,function = "vimclk2_alt"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + cam_i2c_scl_pbb1 { + nvidia,pins = "cam_i2c_scl_pbb1"; + nvidia,function = "i2c3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + cam_i2c_sda_pbb2 { + nvidia,pins = "cam_i2c_sda_pbb2"; + nvidia,function = "i2c3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + pbb3 { + nvidia,pins = "pbb3"; + nvidia,function = "vgp3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pbb4 { + nvidia,pins = "pbb4"; + nvidia,function = "vgp4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pbb5 { + nvidia,pins = "pbb5"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pbb6 { + nvidia,pins = "pbb6"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pbb7 { + nvidia,pins = "pbb7"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + cam_mclk_pcc0 { + nvidia,pins = "cam_mclk_pcc0"; + nvidia,function = "vi_alt3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pcc1 { + nvidia,pins = "pcc1"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pcc2 { + nvidia,pins = "pcc2"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc4_clk_pcc4 { + nvidia,pins = "sdmmc4_clk_pcc4"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + clk2_req_pcc5 { + nvidia,pins = "clk2_req_pcc5"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + clk3_out_pee0 { + nvidia,pins = "clk3_out_pee0"; + nvidia,function = "extperiph3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + clk3_req_pee1 { + nvidia,pins = "clk3_req_pee1"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap_mclk1_req_pee2 { + nvidia,pins = "dap_mclk1_req_pee2"; + nvidia,function = "sata"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + hdmi_cec_pee3 { + nvidia,pins = "hdmi_cec_pee3"; + nvidia,function = "cec"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + sdmmc3_clk_lb_out_pee4 { + nvidia,pins = "sdmmc3_clk_lb_out_pee4"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc3_clk_lb_in_pee5 { + nvidia,pins = "sdmmc3_clk_lb_in_pee5"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dp_hpd_pff0 { + nvidia,pins = "dp_hpd_pff0"; + nvidia,function = "dp"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + usb_vbus_en2_pff1 { + nvidia,pins = "usb_vbus_en2_pff1"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pff2 { + nvidia,pins = "pff2"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + core_pwr_req { + nvidia,pins = "core_pwr_req"; + nvidia,function = "pwron"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + cpu_pwr_req { + nvidia,pins = "cpu_pwr_req"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pwr_int_n { + nvidia,pins = "pwr_int_n"; + nvidia,function = "pmi"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + reset_out_n { + nvidia,pins = "reset_out_n"; + nvidia,function = "reset_out_n"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + owr { + nvidia,pins = "owr"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,rcv-sel = <TEGRA_PIN_DISABLE>; + }; + clk_32k_in { + nvidia,pins = "clk_32k_in"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + jtag_rtck { + nvidia,pins = "jtag_rtck"; + nvidia,function = "rtck"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + }; + }; + + /* DB9 serial port */ + serial@0,70006300 { + status = "okay"; + }; + + /* Expansion GEN1_I2C_*, mini-PCIe I2C, on-board components */ + i2c@0,7000c000 { + status = "okay"; + clock-frequency = <100000>; + + rt5639: audio-codec@1c { + compatible = "realtek,rt5639"; + reg = <0x1c>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(H, 4) GPIO_ACTIVE_HIGH>; + realtek,ldo1-en-gpios = + <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_HIGH>; + }; + + temperature-sensor@4c { + compatible = "ti,tmp451"; + reg = <0x4c>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>; + }; + + eeprom@56 { + compatible = "atmel,24c02"; + reg = <0x56>; + pagesize = <8>; + }; + }; + + /* Expansion GEN2_I2C_* */ + i2c@0,7000c400 { + status = "okay"; + clock-frequency = <100000>; + }; + + /* Expansion CAM_I2C_* */ + i2c@0,7000c500 { + status = "okay"; + clock-frequency = <100000>; + }; + + /* HDMI DDC */ + hdmi_ddc: i2c@0,7000c700 { + status = "okay"; + clock-frequency = <100000>; + }; + + /* Expansion PWR_I2C_*, on-board components */ + i2c@0,7000d000 { + status = "okay"; + clock-frequency = <400000>; + + pmic: pmic@40 { + compatible = "ams,as3722"; + reg = <0x40>; + interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>; + + ams,system-power-controller; + + #interrupt-cells = <2>; + interrupt-controller; + + gpio-controller; + #gpio-cells = <2>; + + pinctrl-names = "default"; + pinctrl-0 = <&as3722_default>; + + as3722_default: pinmux { + gpio0 { + pins = "gpio0"; + function = "gpio"; + bias-pull-down; + }; + + gpio1_2_4_7 { + pins = "gpio1", "gpio2", "gpio4", "gpio7"; + function = "gpio"; + bias-pull-up; + }; + + gpio3_5_6 { + pins = "gpio3", "gpio5", "gpio6"; + bias-high-impedance; + }; + }; + + regulators { + vsup-sd2-supply = <&vdd_5v0_sys>; + vsup-sd3-supply = <&vdd_5v0_sys>; + vsup-sd4-supply = <&vdd_5v0_sys>; + vsup-sd5-supply = <&vdd_5v0_sys>; + vin-ldo0-supply = <&vdd_1v35_lp0>; + vin-ldo1-6-supply = <&vdd_3v3_run>; + vin-ldo2-5-7-supply = <&vddio_1v8>; + vin-ldo3-4-supply = <&vdd_3v3_sys>; + vin-ldo9-10-supply = <&vdd_5v0_sys>; + vin-ldo11-supply = <&vdd_3v3_run>; + + sd0 { + regulator-name = "+VDD_CPU_AP"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1400000>; + regulator-min-microamp = <3500000>; + regulator-max-microamp = <3500000>; + regulator-always-on; + regulator-boot-on; + ams,external-control = <2>; + }; + + sd1 { + regulator-name = "+VDD_CORE"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1350000>; + regulator-min-microamp = <2500000>; + regulator-max-microamp = <2500000>; + regulator-always-on; + regulator-boot-on; + ams,external-control = <1>; + }; + + vdd_1v35_lp0: sd2 { + regulator-name = "+1.35V_LP0(sd2)"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + sd3 { + regulator-name = "+1.35V_LP0(sd3)"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_1v05_run: sd4 { + regulator-name = "+1.05V_RUN"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + + vddio_1v8: sd5 { + regulator-name = "+1.8V_VDDIO"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + sd6 { + regulator-name = "+VDD_GPU_AP"; + regulator-min-microvolt = <650000>; + regulator-max-microvolt = <1200000>; + regulator-min-microamp = <3500000>; + regulator-max-microamp = <3500000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo0 { + regulator-name = "+1.05V_RUN_AVDD"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + regulator-boot-on; + regulator-always-on; + ams,external-control = <1>; + }; + + ldo1 { + regulator-name = "+1.8V_RUN_CAM"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo2 { + regulator-name = "+1.2V_GEN_AVDD"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo3 { + regulator-name = "+1.05V_LP0_VDD_RTC"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-boot-on; + regulator-always-on; + ams,enable-tracking; + }; + + ldo4 { + regulator-name = "+2.8V_RUN_CAM"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo5 { + regulator-name = "+1.2V_RUN_CAM_FRONT"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vddio_sdmmc3: ldo6 { + regulator-name = "+VDDIO_SDMMC3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + ldo7 { + regulator-name = "+1.05V_RUN_CAM_REAR"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + + ldo9 { + regulator-name = "+3.3V_RUN_TOUCH"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo10 { + regulator-name = "+2.8V_RUN_CAM_AF"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo11 { + regulator-name = "+1.8V_RUN_VPP_FUSE"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; + }; + }; + + /* Expansion TS_SPI_* */ + spi@0,7000d400 { + status = "okay"; + }; + + /* Internal SPI */ + spi@0,7000da00 { + status = "okay"; + spi-max-frequency = <25000000>; + spi-flash@0 { + compatible = "winbond,w25q32dw"; + reg = <0>; + spi-max-frequency = <20000000>; + }; + }; + + pmc@0,7000e400 { + nvidia,invert-interrupt; + nvidia,suspend-mode = <1>; + nvidia,cpu-pwr-good-time = <500>; + nvidia,cpu-pwr-off-time = <300>; + nvidia,core-pwr-good-time = <641 3845>; + nvidia,core-pwr-off-time = <61036>; + nvidia,core-power-req-active-high; + nvidia,sys-clock-req-active-high; + }; + + /* SD card */ + sdhci@0,700b0400 { + status = "okay"; + cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>; + power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>; + wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_HIGH>; + bus-width = <4>; + vqmmc-supply = <&vddio_sdmmc3>; + }; + + /* eMMC */ + sdhci@0,700b0600 { + status = "okay"; + bus-width = <8>; + }; + + ahub@0,70300000 { + i2s@0,70301100 { + status = "okay"; + }; + }; + + /* mini-PCIe USB */ + usb@0,7d004000 { + status = "okay"; + }; + + usb-phy@0,7d004000 { + status = "okay"; + }; + + /* USB A connector */ + usb@0,7d008000 { + status = "okay"; + }; + + usb-phy@0,7d008000 { + status = "okay"; + vbus-supply = <&vdd_usb3_vbus>; + }; + + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + clk32k_in: clock@0 { + compatible = "fixed-clock"; + reg = <0>; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + power { + label = "Power"; + gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + debounce-interval = <10>; + gpio-key,wakeup; + }; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + vdd_mux: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "+VDD_MUX"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_5v0_sys: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "+5V_SYS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vdd_mux>; + }; + + vdd_3v3_sys: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "+3.3V_SYS"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vdd_mux>; + }; + + vdd_3v3_run: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "+3.3V_RUN"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + gpio = <&pmic 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_3v3_sys>; + }; + + vdd_3v3_hdmi: regulator@4 { + compatible = "regulator-fixed"; + reg = <4>; + regulator-name = "+3.3V_AVDD_HDMI_AP_GATED"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vdd_3v3_run>; + }; + + vdd_usb1_vbus: regulator@7 { + compatible = "regulator-fixed"; + reg = <7>; + regulator-name = "+USB0_VBUS_SW"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>; + enable-active-high; + gpio-open-drain; + vin-supply = <&vdd_5v0_sys>; + }; + + vdd_usb3_vbus: regulator@8 { + compatible = "regulator-fixed"; + reg = <8>; + regulator-name = "+5V_USB_HS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>; + enable-active-high; + gpio-open-drain; + vin-supply = <&vdd_5v0_sys>; + }; + + vdd_3v3_lp0: regulator@10 { + compatible = "regulator-fixed"; + reg = <10>; + regulator-name = "+3.3V_LP0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + gpio = <&pmic 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_3v3_sys>; + }; + + vdd_hdmi_pll: regulator@11 { + compatible = "regulator-fixed"; + reg = <11>; + regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>; + vin-supply = <&vdd_1v05_run>; + }; + + vdd_5v0_hdmi: regulator@12 { + compatible = "regulator-fixed"; + reg = <12>; + regulator-name = "+5V_HDMI_CON"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_5v0_sys>; + }; + }; + + sound { + compatible = "nvidia,tegra-audio-rt5640-jetson-tk1", + "nvidia,tegra-audio-rt5640"; + nvidia,model = "NVIDIA Tegra Jetson TK1"; + + nvidia,audio-routing = + "Headphones", "HPOR", + "Headphones", "HPOL", + "Mic Jack", "MICBIAS1", + "IN2P", "Mic Jack"; + + nvidia,i2s-controller = <&tegra_i2s1>; + nvidia,audio-codec = <&rt5639>; + + nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_LOW>; + + clocks = <&tegra_car TEGRA124_CLK_PLL_A>, + <&tegra_car TEGRA124_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA124_CLK_EXTERN1>; + clock-names = "pll_a", "pll_a_out0", "mclk"; + }; +}; diff --git a/arch/arm/boot/dts/tegra124-venice2.dts b/arch/arm/boot/dts/tegra124-venice2.dts index c17283c04598..f0bb84244025 100644 --- a/arch/arm/boot/dts/tegra124-venice2.dts +++ b/arch/arm/boot/dts/tegra124-venice2.dts @@ -17,6 +17,18 @@ }; host1x@0,50000000 { + hdmi@0,54280000 { + status = "okay"; + + vdd-supply = <&vdd_3v3_hdmi>; + pll-supply = <&vdd_hdmi_pll>; + hdmi-supply = <&vdd_5v0_hdmi>; + + nvidia,ddc-i2c-bus = <&hdmi_ddc>; + nvidia,hpd-gpio = + <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>; + }; + sor@0,54540000 { status = "okay"; @@ -601,7 +613,7 @@ clock-frequency = <100000>; }; - i2c@0,7000c700 { + hdmi_ddc: i2c@0,7000c700 { status = "okay"; clock-frequency = <100000>; }; @@ -700,7 +712,7 @@ regulator-boot-on; }; - sd4 { + vdd_1v05_run: sd4 { regulator-name = "+1.05V_RUN"; regulator-min-microvolt = <1050000>; regulator-max-microvolt = <1050000>; @@ -931,9 +943,10 @@ sdhci@0,700b0400 { cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>; power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>; + wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>; status = "okay"; bus-width = <4>; - vmmc-supply = <&vddio_sdmmc3>; + vqmmc-supply = <&vddio_sdmmc3>; }; sdhci@0,700b0600 { @@ -1060,6 +1073,8 @@ regulator-name = "+3.3V_RUN"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; gpio = <&pmic 1 GPIO_ACTIVE_HIGH>; enable-active-high; vin-supply = <&vdd_3v3_sys>; @@ -1145,6 +1160,27 @@ enable-active-high; vin-supply = <&vdd_3v3_sys>; }; + + vdd_hdmi_pll: regulator@11 { + compatible = "regulator-fixed"; + reg = <11>; + regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>; + vin-supply = <&vdd_1v05_run>; + }; + + vdd_5v0_hdmi: regulator@12 { + compatible = "regulator-fixed"; + reg = <12>; + regulator-name = "+5V_HDMI_CON"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_5v0_sys>; + }; }; sound { diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi index 6d540a025148..6e6bc4e8185c 100644 --- a/arch/arm/boot/dts/tegra124.dtsi +++ b/arch/arm/boot/dts/tegra124.dtsi @@ -51,6 +51,18 @@ nvidia,head = <1>; }; + hdmi@0,54280000 { + compatible = "nvidia,tegra124-hdmi"; + reg = <0x0 0x54280000 0x0 0x00040000>; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA124_CLK_HDMI>, + <&tegra_car TEGRA124_CLK_PLL_D2_OUT0>; + clock-names = "hdmi", "parent"; + resets = <&tegra_car 51>; + reset-names = "hdmi"; + status = "disabled"; + }; + sor@0,54540000 { compatible = "nvidia,tegra124-sor"; reg = <0x0 0x54540000 0x0 0x00040000>; diff --git a/arch/arm/boot/dts/tegra20-harmony.dts b/arch/arm/boot/dts/tegra20-harmony.dts index 3fb1f50f6d46..f45aad688d9b 100644 --- a/arch/arm/boot/dts/tegra20-harmony.dts +++ b/arch/arm/boot/dts/tegra20-harmony.dts @@ -28,6 +28,7 @@ hdmi@54280000 { status = "okay"; + hdmi-supply = <&vdd_5v0_hdmi>; vdd-supply = <&hdmi_vdd_reg>; pll-supply = <&hdmi_pll_reg>; @@ -724,6 +725,17 @@ gpio = <&gpio TEGRA_GPIO(W, 0) GPIO_ACTIVE_HIGH>; enable-active-high; }; + + vdd_5v0_hdmi: regulator@6 { + compatible = "regulator-fixed"; + reg = <6>; + regulator-name = "VDDIO_HDMI"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(T, 2) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_5v0_reg>; + }; }; sound { diff --git a/arch/arm/boot/dts/tegra30-beaver.dts b/arch/arm/boot/dts/tegra30-beaver.dts index e93fe45b7803..3189791a9289 100644 --- a/arch/arm/boot/dts/tegra30-beaver.dts +++ b/arch/arm/boot/dts/tegra30-beaver.dts @@ -40,6 +40,7 @@ hdmi@54280000 { status = "okay"; + hdmi-supply = <&vdd_5v0_hdmi>; vdd-supply = <&sys_3v3_reg>; pll-supply = <&vio_reg>; @@ -478,6 +479,17 @@ gpio = <&gpio TEGRA_GPIO(L, 7) GPIO_ACTIVE_HIGH>; vin-supply = <&sys_3v3_reg>; }; + + vdd_5v0_hdmi: regulator@8 { + compatible = "regulator-fixed"; + reg = <8>; + regulator-name = "+VDD_5V_HDMI"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&sys_3v3_reg>; + }; }; sound { diff --git a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts new file mode 100644 index 000000000000..7793abd5bef1 --- /dev/null +++ b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts @@ -0,0 +1,205 @@ +/dts-v1/; + +#include "tegra30-colibri.dtsi" + +/ { + model = "Toradex Colibri T30 on Colibri Evaluation Board"; + compatible = "toradex,colibri_t30-eval-v3", "toradex,colibri_t30", "nvidia,tegra30"; + + aliases { + rtc0 = "/i2c@7000c000/rtc@68"; + rtc1 = "/i2c@7000d000/tps65911@2d"; + rtc2 = "/rtc@7000e000"; + }; + + host1x@50000000 { + dc@54200000 { + rgb { + status = "okay"; + nvidia,panel = <&panel>; + }; + }; + hdmi@54280000 { + status = "okay"; + }; + }; + + serial@70006000 { + status = "okay"; + }; + + serial@70006040 { + compatible = "nvidia,tegra30-hsuart"; + status = "okay"; + }; + + serial@70006300 { + compatible = "nvidia,tegra30-hsuart"; + status = "okay"; + }; + + pwm@7000a000 { + status = "okay"; + }; + + /* + * GEN1_I2C: I2C_SDA/SCL on SODIMM pin 194/196 (e.g. RTC on carrier + * board) + */ + i2c@7000c000 { + status = "okay"; + clock-frequency = <100000>; + + /* M41T0M6 real time clock on carrier board */ + rtc@68 { + compatible = "stm,m41t00"; + reg = <0x68>; + }; + }; + + /* DDC_CLOCK/DATA on X3 pin 15/16 (e.g. display EDID) */ + hdmiddc: i2c@7000c700 { + status = "okay"; + }; + + /* SPI1: Colibri SSP */ + spi@7000d400 { + status = "okay"; + spi-max-frequency = <25000000>; + can0: can@0 { + compatible = "microchip,mcp2515"; + reg = <0>; + clocks = <&clk16m>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(S, 0) GPIO_ACTIVE_LOW>; + spi-max-frequency = <10000000>; + }; + spidev0: spi@1 { + compatible = "spidev"; + reg = <1>; + spi-max-frequency = <25000000>; + }; + }; + + sdhci@78000200 { + status = "okay"; + bus-width = <4>; + cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>; + no-1-8-v; + }; + + /* EHCI instance 0: USB1_DP/N -> USBC_P/N */ + usb@7d000000 { + status = "okay"; + }; + + usb-phy@7d000000 { + status = "okay"; + dr_mode = "otg"; + vbus-supply = <&usbc_vbus_reg>; + }; + + /* EHCI instance 2: USB3_DP/N -> USBH_P/N */ + usb@7d008000 { + status = "okay"; + }; + + usb-phy@7d008000 { + status = "okay"; + vbus-supply = <&usbh_vbus_reg>; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + + /* PWM<A> */ + pwms = <&pwm 0 5000000>; + brightness-levels = <255 128 64 32 16 8 4 0>; + default-brightness-level = <6>; + /* BL_ON */ + enable-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>; + }; + + clocks { + clk16m: clk@1 { + compatible = "fixed-clock"; + reg=<1>; + #clock-cells = <0>; + clock-frequency = <16000000>; + clock-output-names = "clk16m"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + power { + label = "Power"; + gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_HIGH>; + linux,code = <KEY_POWER>; + debounce-interval = <10>; + gpio-key,wakeup; + }; + }; + + panel: panel { + /* + * edt,et057090dhu: EDT 5.7" LCD TFT + * edt,et070080dh6: EDT 7.0" LCD TFT + */ + compatible = "edt,et057090dhu", "simple-panel"; + + backlight = <&backlight>; + }; + + pwmleds { + compatible = "pwm-leds"; + + pwmb { + label = "PWM<B>"; + pwms = <&pwm 1 19600>; + max-brightness = <255>; + }; + pwmc { + label = "PWM<C>"; + pwms = <&pwm 2 19600>; + max-brightness = <255>; + }; + pwmd { + label = "PWM<D>"; + pwms = <&pwm 3 19600>; + max-brightness = <255>; + }; + }; + + regulators { + sys_5v0_reg: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + usbc_vbus_reg: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "usbc_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&sys_5v0_reg>; + }; + + /* USBH_PEN */ + usbh_vbus_reg: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "usbh_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>; + vin-supply = <&sys_5v0_reg>; + }; + }; +}; diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi new file mode 100644 index 000000000000..bf16f8e65627 --- /dev/null +++ b/arch/arm/boot/dts/tegra30-colibri.dtsi @@ -0,0 +1,377 @@ +#include <dt-bindings/input/input.h> +#include "tegra30.dtsi" + +/* + * Toradex Colibri T30 Device Tree + * Compatible for Revisions 1.1B/1.1C/1.1D + */ +/ { + model = "Toradex Colibri T30"; + compatible = "toradex,colibri_t30", "nvidia,tegra30"; + + memory { + reg = <0x80000000 0x40000000>; + }; + + host1x@50000000 { + hdmi@54280000 { + vdd-supply = <&sys_3v3_reg>; + pll-supply = <&vio_reg>; + + nvidia,hpd-gpio = + <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>; + nvidia,ddc-i2c-bus = <&hdmiddc>; + }; + }; + + pinmux@70000868 { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + /* Colibri BL_ON */ + pv2 { + nvidia,pins = "pv2"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + /* Colibri Backlight PWM<A> */ + sdmmc3_dat3_pb4 { + nvidia,pins = "sdmmc3_dat3_pb4"; + nvidia,function = "pwm0"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + /* Colibri CAN_INT */ + kb_row8_ps0 { + nvidia,pins = "kb_row8_ps0"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* + * Colibri L_BIAS, LCD_M1 is muxed with LCD_DE + * todays display need DE, disable LCD_M1 + */ + lcd_m1_pw1 { + nvidia,pins = "lcd_m1_pw1"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* Thermal alert, need to be disabled */ + lcd_dc1_pd2 { + nvidia,pins = "lcd_dc1_pd2"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* Colibri MMC */ + kb_row10_ps2 { + nvidia,pins = "kb_row10_ps2"; + nvidia,function = "sdmmc2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + kb_row11_ps3 { + nvidia,pins = "kb_row11_ps3", + "kb_row12_ps4", + "kb_row13_ps5", + "kb_row14_ps6", + "kb_row15_ps7"; + nvidia,function = "sdmmc2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + /* Colibri SSP */ + ulpi_clk_py0 { + nvidia,pins = "ulpi_clk_py0", + "ulpi_dir_py1", + "ulpi_nxt_py2", + "ulpi_stp_py3"; + nvidia,function = "spi1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + sdmmc3_dat6_pd3 { + nvidia,pins = "sdmmc3_dat6_pd3", + "sdmmc3_dat7_pd4"; + nvidia,function = "spdif"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + }; + + /* Colibri UART_A */ + ulpi_data0 { + nvidia,pins = "ulpi_data0_po1", + "ulpi_data1_po2", + "ulpi_data2_po3", + "ulpi_data3_po4", + "ulpi_data4_po5", + "ulpi_data5_po6", + "ulpi_data6_po7", + "ulpi_data7_po0"; + nvidia,function = "uarta"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + /* Colibri UART_B */ + gmi_a16_pj7 { + nvidia,pins = "gmi_a16_pj7", + "gmi_a17_pb0", + "gmi_a18_pb1", + "gmi_a19_pk7"; + nvidia,function = "uartd"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + /* Colibri UART_C */ + uart2_rxd { + nvidia,pins = "uart2_rxd_pc3", + "uart2_txd_pc2"; + nvidia,function = "uartb"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + /* eMMC */ + sdmmc4_clk_pcc4 { + nvidia,pins = "sdmmc4_clk_pcc4", + "sdmmc4_rst_n_pcc3"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + sdmmc4_dat0_paa0 { + nvidia,pins = "sdmmc4_dat0_paa0", + "sdmmc4_dat1_paa1", + "sdmmc4_dat2_paa2", + "sdmmc4_dat3_paa3", + "sdmmc4_dat4_paa4", + "sdmmc4_dat5_paa5", + "sdmmc4_dat6_paa6", + "sdmmc4_dat7_paa7"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + }; + }; + + hdmiddc: i2c@7000c700 { + clock-frequency = <100000>; + }; + + /* + * PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and + * touch screen controller + */ + i2c@7000d000 { + status = "okay"; + clock-frequency = <100000>; + + pmic: tps65911@2d { + compatible = "ti,tps65911"; + reg = <0x2d>; + + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <2>; + interrupt-controller; + + ti,system-power-controller; + + #gpio-cells = <2>; + gpio-controller; + + vcc1-supply = <&sys_3v3_reg>; + vcc2-supply = <&sys_3v3_reg>; + vcc3-supply = <&vio_reg>; + vcc4-supply = <&sys_3v3_reg>; + vcc5-supply = <&sys_3v3_reg>; + vcc6-supply = <&vio_reg>; + vcc7-supply = <&sys_5v0_reg>; + vccio-supply = <&sys_3v3_reg>; + + regulators { + /* SW1: +V1.35_VDDIO_DDR */ + vdd1_reg: vdd1 { + regulator-name = "vddio_ddr_1v35"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + }; + + /* SW2: unused */ + + /* SW CTRL: +V1.0_VDD_CPU */ + vddctrl_reg: vddctrl { + regulator-name = "vdd_cpu,vdd_sys"; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + regulator-always-on; + }; + + /* SWIO: +V1.8 */ + vio_reg: vio { + regulator-name = "vdd_1v8_gen"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + /* LDO1: unused */ + + /* + * EN_+V3.3 switching via FET: + * +V3.3_AUDIO_AVDD_S, +V3.3 and +V1.8_VDD_LAN + * see also v3_3 fixed supply + */ + ldo2_reg: ldo2 { + regulator-name = "en_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + /* LDO3: unused */ + + /* +V1.2_VDD_RTC */ + ldo4_reg: ldo4 { + regulator-name = "vdd_rtc"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + /* + * +V2.8_AVDD_VDAC: + * only required for analog RGB + */ + ldo5_reg: ldo5 { + regulator-name = "avdd_vdac"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + /* + * +V1.05_AVDD_PLLE: avdd_plle should be 1.05V + * but LDO6 can't set voltage in 50mV + * granularity + */ + ldo6_reg: ldo6 { + regulator-name = "avdd_plle"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + + /* +V1.2_AVDD_PLL */ + ldo7_reg: ldo7 { + regulator-name = "avdd_pll"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + /* +V1.0_VDD_DDR_HS */ + ldo8_reg: ldo8 { + regulator-name = "vdd_ddr_hs"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + }; + }; + + /* + * LM95245 temperature sensor + * Note: OVERT_N directly connected to PMIC PWRDN + */ + temp-sensor@4c { + compatible = "national,lm95245"; + reg = <0x4c>; + }; + + /* SW: +V1.2_VDD_CORE */ + tps62362@60 { + compatible = "ti,tps62362"; + reg = <0x60>; + + regulator-name = "tps62362-vout"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1400000>; + regulator-boot-on; + regulator-always-on; + ti,vsel0-state-low; + /* VSEL1: EN_CORE_DVFS_N low for DVFS */ + ti,vsel1-state-low; + }; + }; + + pmc@7000e400 { + nvidia,invert-interrupt; + nvidia,suspend-mode = <1>; + nvidia,cpu-pwr-good-time = <5000>; + nvidia,cpu-pwr-off-time = <5000>; + nvidia,core-pwr-good-time = <3845 3845>; + nvidia,core-pwr-off-time = <0>; + nvidia,core-power-req-active-high; + nvidia,sys-clock-req-active-high; + }; + + emmc: sdhci@78000600 { + status = "okay"; + bus-width = <8>; + non-removable; + }; + + /* EHCI instance 1: USB2_DP/N -> AX88772B */ + usb@7d004000 { + status = "okay"; + }; + + usb-phy@7d004000 { + status = "okay"; + nvidia,is-wired = <1>; + }; + + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + clk32k_in: clk@0 { + compatible = "fixed-clock"; + reg=<0>; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + sys_3v3_reg: regulator@100 { + compatible = "regulator-fixed"; + reg = <100>; + regulator-name = "3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; +}; diff --git a/arch/arm/boot/dts/twl4030.dtsi b/arch/arm/boot/dts/twl4030.dtsi index 86cfc7d15ca7..36ae9160b558 100644 --- a/arch/arm/boot/dts/twl4030.dtsi +++ b/arch/arm/boot/dts/twl4030.dtsi @@ -152,4 +152,10 @@ keypad,num-rows = <8>; keypad,num-columns = <8>; }; + + twl_madc: madc { + compatible = "ti,twl4030-madc"; + interrupts = <3>; + #io-channel-cells = <1>; + }; }; diff --git a/arch/arm/boot/dts/vf610-colibri.dts b/arch/arm/boot/dts/vf610-colibri.dts new file mode 100644 index 000000000000..aecc7dbc65e8 --- /dev/null +++ b/arch/arm/boot/dts/vf610-colibri.dts @@ -0,0 +1,123 @@ +/* + * Copyright 2014 Toradex AG + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +/dts-v1/; +#include "vf610.dtsi" + +/ { + model = "Toradex Colibri VF61 COM"; + compatible = "toradex,vf610-colibri", "fsl,vf610"; + + chosen { + bootargs = "console=ttyLP0,115200"; + }; + + memory { + reg = <0x80000000 0x10000000>; + }; + + clocks { + enet_ext { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <50000000>; + }; + }; + +}; + +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1>; + bus-width = <4>; + status = "okay"; +}; + +&fec1 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + status = "okay"; +}; + +&L2 { + arm,data-latency = <2 1 2>; + arm,tag-latency = <3 2 3>; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&iomuxc { + vf610-colibri { + pinctrl_esdhc1: esdhc1grp { + fsl,fsl,pins = < + VF610_PAD_PTA24__ESDHC1_CLK 0x31ef + VF610_PAD_PTA25__ESDHC1_CMD 0x31ef + VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef + VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef + VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef + VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef + VF610_PAD_PTB20__GPIO_42 0x219d + >; + }; + + pinctrl_fec1: fec1grp { + fsl,pins = < + VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2 + VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3 + VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1 + VF610_PAD_PTC12__ENET_RMII_RXD1 0x30d1 + VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1 + VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1 + VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2 + VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2 + VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2 + >; + }; + + pinctrl_uart0: uart0grp { + fsl,pins = < + VF610_PAD_PTB10__UART0_TX 0x21a2 + VF610_PAD_PTB11__UART0_RX 0x21a1 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + VF610_PAD_PTB4__UART1_TX 0x21a2 + VF610_PAD_PTB5__UART1_RX 0x21a1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + VF610_PAD_PTD0__UART2_TX 0x21a2 + VF610_PAD_PTD1__UART2_RX 0x21a1 + VF610_PAD_PTD2__UART2_RTS 0x21a2 + VF610_PAD_PTD3__UART2_CTS 0x21a1 + >; + }; + }; +}; diff --git a/arch/arm/boot/dts/vf610-twr.dts b/arch/arm/boot/dts/vf610-twr.dts index ded361075aab..11d733406c7e 100644 --- a/arch/arm/boot/dts/vf610-twr.dts +++ b/arch/arm/boot/dts/vf610-twr.dts @@ -113,6 +113,13 @@ }; }; +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1>; + bus-width = <4>; + status = "okay"; +}; + &fec0 { phy-mode = "rmii"; pinctrl-names = "default"; @@ -160,6 +167,18 @@ >; }; + pinctrl_esdhc1: esdhc1grp { + fsl,fsl,pins = < + VF610_PAD_PTA24__ESDHC1_CLK 0x31ef + VF610_PAD_PTA25__ESDHC1_CMD 0x31ef + VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef + VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef + VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef + VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef + VF610_PAD_PTA7__GPIO_134 0x219d + >; + }; + pinctrl_fec0: fec0grp { fsl,pins = < VF610_PAD_PTA6__RMII_CLKIN 0x30d1 @@ -196,6 +215,17 @@ >; }; + pinctrl_pwm0: pwm0grp { + fsl,pins = < + VF610_PAD_PTB0__FTM0_CH0 0x1582 + VF610_PAD_PTB1__FTM0_CH1 0x1582 + VF610_PAD_PTB2__FTM0_CH2 0x1582 + VF610_PAD_PTB3__FTM0_CH3 0x1582 + VF610_PAD_PTB6__FTM0_CH6 0x1582 + VF610_PAD_PTB7__FTM0_CH7 0x1582 + >; + }; + pinctrl_sai2: sai2grp { fsl,pins = < VF610_PAD_PTA16__SAI2_TX_BCLK 0x02ed @@ -217,6 +247,12 @@ }; }; +&pwm0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0>; + status = "okay"; +}; + &sai2 { #sound-dai-cells = <0>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/vf610.dtsi b/arch/arm/boot/dts/vf610.dtsi index b8ce0aa7b157..73355ddc5186 100644 --- a/arch/arm/boot/dts/vf610.dtsi +++ b/arch/arm/boot/dts/vf610.dtsi @@ -183,6 +183,19 @@ clock-names = "pit"; }; + pwm0: pwm@40038000 { + compatible = "fsl,vf610-ftm-pwm"; + #pwm-cells = <3>; + reg = <0x40038000 0x1000>; + clock-names = "ftm_sys", "ftm_ext", + "ftm_fix", "ftm_cnt_clk_en"; + clocks = <&clks VF610_CLK_FTM0>, + <&clks VF610_CLK_FTM0_EXT_SEL>, + <&clks VF610_CLK_FTM0_FIX_SEL>, + <&clks VF610_CLK_FTM0_EXT_FIX_EN>; + status = "disabled"; + }; + adc0: adc@4003b000 { compatible = "fsl,vf610-adc"; reg = <0x4003b000 0x1000>; @@ -347,6 +360,17 @@ status = "disabled"; }; + esdhc1: esdhc@400b2000 { + compatible = "fsl,imx53-esdhc"; + reg = <0x400b2000 0x4000>; + interrupts = <0 28 0x04>; + clocks = <&clks VF610_CLK_IPG_BUS>, + <&clks VF610_CLK_PLATFORM_BUS>, + <&clks VF610_CLK_ESDHC1>; + clock-names = "ipg", "ahb", "per"; + status = "disabled"; + }; + fec0: ethernet@400d0000 { compatible = "fsl,mvf600-fec"; reg = <0x400d0000 0x1000>; diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi index 80d8e4f3f626..760bbc463c5b 100644 --- a/arch/arm/boot/dts/zynq-7000.dtsi +++ b/arch/arm/boot/dts/zynq-7000.dtsi @@ -1,5 +1,5 @@ /* - * Copyright (C) 2011 Xilinx + * Copyright (C) 2011 - 2014 Xilinx * * This software is licensed under the terms of the GNU General Public * License version 2, as published by the Free Software Foundation, and @@ -25,6 +25,7 @@ reg = <0>; clocks = <&clkc 3>; clock-latency = <1000>; + cpu0-supply = <®ulator_vccpint>; operating-points = < /* kHz uV */ 666667 1000000 @@ -48,6 +49,15 @@ reg = < 0xf8891000 0x1000 0xf8893000 0x1000 >; }; + regulator_vccpint: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "VCCPINT"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-boot-on; + regulator-always-on; + }; + amba { compatible = "simple-bus"; #address-cells = <1>; @@ -55,7 +65,7 @@ interrupt-parent = <&intc>; ranges; - i2c0: zynq-i2c@e0004000 { + i2c0: i2c@e0004000 { compatible = "cdns,i2c-r1p10"; status = "disabled"; clocks = <&clkc 38>; @@ -66,7 +76,7 @@ #size-cells = <0>; }; - i2c1: zynq-i2c@e0005000 { + i2c1: i2c@e0005000 { compatible = "cdns,i2c-r1p10"; status = "disabled"; clocks = <&clkc 39>; @@ -80,7 +90,6 @@ intc: interrupt-controller@f8f01000 { compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; - #address-cells = <1>; interrupt-controller; reg = <0xF8F01000 0x1000>, <0xF8F00100 0x100>; @@ -95,7 +104,7 @@ cache-level = <2>; }; - uart0: uart@e0000000 { + uart0: serial@e0000000 { compatible = "xlnx,xuartps"; status = "disabled"; clocks = <&clkc 23>, <&clkc 40>; @@ -104,7 +113,7 @@ interrupts = <0 27 4>; }; - uart1: uart@e0001000 { + uart1: serial@e0001000 { compatible = "xlnx,xuartps"; status = "disabled"; clocks = <&clkc 24>, <&clkc 41>; @@ -131,7 +140,7 @@ clock-names = "pclk", "hclk", "tx_clk"; }; - sdhci0: ps7-sdhci@e0100000 { + sdhci0: sdhci@e0100000 { compatible = "arasan,sdhci-8.9a"; status = "disabled"; clock-names = "clk_xin", "clk_ahb"; @@ -141,7 +150,7 @@ reg = <0xe0100000 0x1000>; } ; - sdhci1: ps7-sdhci@e0101000 { + sdhci1: sdhci@e0101000 { compatible = "arasan,sdhci-8.9a"; status = "disabled"; clock-names = "clk_xin", "clk_ahb"; @@ -190,26 +199,27 @@ clocks = <&clkc 4>; }; - ttc0: ttc0@f8001000 { + ttc0: timer@f8001000 { interrupt-parent = <&intc>; - interrupts = < 0 10 4 0 11 4 0 12 4 >; + interrupts = <0 10 4>, <0 11 4>, <0 12 4>; compatible = "cdns,ttc"; clocks = <&clkc 6>; reg = <0xF8001000 0x1000>; }; - ttc1: ttc1@f8002000 { + ttc1: timer@f8002000 { interrupt-parent = <&intc>; - interrupts = < 0 37 4 0 38 4 0 39 4 >; + interrupts = <0 37 4>, <0 38 4>, <0 39 4>; compatible = "cdns,ttc"; clocks = <&clkc 6>; reg = <0xF8002000 0x1000>; }; - scutimer: scutimer@f8f00600 { + + scutimer: timer@f8f00600 { interrupt-parent = <&intc>; - interrupts = < 1 13 0x301 >; + interrupts = <1 13 0x301>; compatible = "arm,cortex-a9-twd-timer"; - reg = < 0xf8f00600 0x20 >; + reg = <0xf8f00600 0x20>; clocks = <&clkc 4>; } ; }; diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index b2d2cf4dc052..45b55e0f0db6 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -167,7 +167,6 @@ config SOC_AT91SAM9X5 select HAVE_AT91_DBGU0 select HAVE_FB_ATMEL select SOC_AT91SAM9 - select AT91_USE_OLD_CLK select HAVE_AT91_UTMI select HAVE_AT91_SMD select HAVE_AT91_USB_CLK @@ -183,7 +182,6 @@ config SOC_AT91SAM9N12 select HAVE_AT91_DBGU0 select HAVE_FB_ATMEL select SOC_AT91SAM9 - select AT91_USE_OLD_CLK select HAVE_AT91_USB_CLK help Select this if you are using Atmel's AT91SAM9N12 SoC. diff --git a/arch/arm/mach-at91/at91sam9n12.c b/arch/arm/mach-at91/at91sam9n12.c index f2ea7b0a02da..c8988fe5ff70 100644 --- a/arch/arm/mach-at91/at91sam9n12.c +++ b/arch/arm/mach-at91/at91sam9n12.c @@ -19,9 +19,10 @@ #include "board.h" #include "soc.h" #include "generic.h" -#include "clock.h" #include "sam9_smc.h" +#if defined(CONFIG_OLD_CLK_AT91) +#include "clock.h" /* -------------------------------------------------------------------- * Clocks * -------------------------------------------------------------------- */ @@ -215,6 +216,9 @@ static void __init at91sam9n12_register_clocks(void) ARRAY_SIZE(periph_clocks_lookups)); } +#else +#define at91sam9n12_register_clocks NULL +#endif /* -------------------------------------------------------------------- * AT91SAM9N12 processor initialization diff --git a/arch/arm/mach-at91/at91sam9x5.c b/arch/arm/mach-at91/at91sam9x5.c index 9ad781d5ee7c..028268ff3722 100644 --- a/arch/arm/mach-at91/at91sam9x5.c +++ b/arch/arm/mach-at91/at91sam9x5.c @@ -19,9 +19,10 @@ #include "board.h" #include "soc.h" #include "generic.h" -#include "clock.h" #include "sam9_smc.h" +#if defined(CONFIG_OLD_CLK_AT91) +#include "clock.h" /* -------------------------------------------------------------------- * Clocks * -------------------------------------------------------------------- */ @@ -313,6 +314,9 @@ static void __init at91sam9x5_register_clocks(void) clk_register(&pck0); clk_register(&pck1); } +#else +#define at91sam9x5_register_clocks NULL +#endif /* -------------------------------------------------------------------- * AT91SAM9x5 processor initialization diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index b8920b6bc104..9480997ba616 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -43,7 +43,7 @@ static void __init omap_generic_init(void) } #ifdef CONFIG_SOC_OMAP2420 -static const char *omap242x_boards_compat[] __initdata = { +static const char *omap242x_boards_compat[] __initconst = { "ti,omap2420", NULL, }; @@ -62,7 +62,7 @@ MACHINE_END #endif #ifdef CONFIG_SOC_OMAP2430 -static const char *omap243x_boards_compat[] __initdata = { +static const char *omap243x_boards_compat[] __initconst = { "ti,omap2430", NULL, }; @@ -81,7 +81,7 @@ MACHINE_END #endif #ifdef CONFIG_ARCH_OMAP3 -static const char *omap3_boards_compat[] __initdata = { +static const char *omap3_boards_compat[] __initconst = { "ti,omap3430", "ti,omap3", NULL, @@ -100,7 +100,7 @@ DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)") .restart = omap3xxx_restart, MACHINE_END -static const char *omap36xx_boards_compat[] __initdata = { +static const char *omap36xx_boards_compat[] __initconst = { "ti,omap36xx", NULL, }; @@ -118,7 +118,7 @@ DT_MACHINE_START(OMAP36XX_DT, "Generic OMAP36xx (Flattened Device Tree)") .restart = omap3xxx_restart, MACHINE_END -static const char *omap3_gp_boards_compat[] __initdata = { +static const char *omap3_gp_boards_compat[] __initconst = { "ti,omap3-beagle", "timll,omap3-devkit8000", NULL, @@ -137,7 +137,7 @@ DT_MACHINE_START(OMAP3_GP_DT, "Generic OMAP3-GP (Flattened Device Tree)") .restart = omap3xxx_restart, MACHINE_END -static const char *am3517_boards_compat[] __initdata = { +static const char *am3517_boards_compat[] __initconst = { "ti,am3517", NULL, }; @@ -157,7 +157,7 @@ MACHINE_END #endif #ifdef CONFIG_SOC_AM33XX -static const char *am33xx_boards_compat[] __initdata = { +static const char *am33xx_boards_compat[] __initconst = { "ti,am33xx", NULL, }; @@ -177,7 +177,7 @@ MACHINE_END #endif #ifdef CONFIG_ARCH_OMAP4 -static const char *omap4_boards_compat[] __initdata = { +static const char *omap4_boards_compat[] __initconst = { "ti,omap4460", "ti,omap4430", "ti,omap4", @@ -199,7 +199,7 @@ MACHINE_END #endif #ifdef CONFIG_SOC_OMAP5 -static const char *omap5_boards_compat[] __initdata = { +static const char *omap5_boards_compat[] __initconst = { "ti,omap5432", "ti,omap5430", "ti,omap5", @@ -221,7 +221,7 @@ MACHINE_END #endif #ifdef CONFIG_SOC_AM43XX -static const char *am43_boards_compat[] __initdata = { +static const char *am43_boards_compat[] __initconst = { "ti,am4372", "ti,am43", NULL, @@ -240,13 +240,13 @@ MACHINE_END #endif #ifdef CONFIG_SOC_DRA7XX -static const char *dra7xx_boards_compat[] __initdata = { - "ti,dra7xx", +static const char *dra74x_boards_compat[] __initconst = { + "ti,dra742", "ti,dra7", NULL, }; -DT_MACHINE_START(DRA7XX_DT, "Generic DRA7XX (Flattened Device Tree)") +DT_MACHINE_START(DRA74X_DT, "Generic DRA74X (Flattened Device Tree)") .reserve = omap_reserve, .smp = smp_ops(omap4_smp_ops), .map_io = omap5_map_io, @@ -255,7 +255,24 @@ DT_MACHINE_START(DRA7XX_DT, "Generic DRA7XX (Flattened Device Tree)") .init_irq = omap_gic_of_init, .init_machine = omap_generic_init, .init_time = omap5_realtime_timer_init, - .dt_compat = dra7xx_boards_compat, + .dt_compat = dra74x_boards_compat, + .restart = omap44xx_restart, +MACHINE_END + +static const char *dra72x_boards_compat[] __initconst = { + "ti,dra722", + NULL, +}; + +DT_MACHINE_START(DRA72X_DT, "Generic DRA72X (Flattened Device Tree)") + .reserve = omap_reserve, + .map_io = omap5_map_io, + .init_early = dra7xx_init_early, + .init_late = dra7xx_init_late, + .init_irq = omap_gic_of_init, + .init_machine = omap_generic_init, + .init_time = omap5_realtime_timer_init, + .dt_compat = dra72x_boards_compat, .restart = omap44xx_restart, MACHINE_END #endif diff --git a/arch/arm/mach-omap2/gpmc-nand.c b/arch/arm/mach-omap2/gpmc-nand.c index 4349e82debfe..17cd39360afe 100644 --- a/arch/arm/mach-omap2/gpmc-nand.c +++ b/arch/arm/mach-omap2/gpmc-nand.c @@ -46,7 +46,7 @@ static struct platform_device gpmc_nand_device = { static bool gpmc_hwecc_bch_capable(enum omap_ecc ecc_opt) { /* platforms which support all ECC schemes */ - if (soc_is_am33xx() || cpu_is_omap44xx() || + if (soc_is_am33xx() || soc_is_am43xx() || cpu_is_omap44xx() || soc_is_omap54xx() || soc_is_dra7xx()) return 1; diff --git a/arch/arm/mach-omap2/hdq1w.c b/arch/arm/mach-omap2/hdq1w.c index cbc8e3c480e0..f78b4a161959 100644 --- a/arch/arm/mach-omap2/hdq1w.c +++ b/arch/arm/mach-omap2/hdq1w.c @@ -76,6 +76,7 @@ int omap_hdq1w_reset(struct omap_hwmod *oh) return 0; } +#ifndef CONFIG_OF static int __init omap_init_hdq(void) { int id = -1; @@ -95,3 +96,4 @@ static int __init omap_init_hdq(void) return 0; } omap_arch_initcall(omap_init_hdq); +#endif diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 71ac7d5f3385..1cd0cfdc03e0 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -3689,12 +3689,9 @@ static struct omap_hwmod_class_sysconfig omap34xx_ssi_sysc = { .rev_offs = 0x0000, .sysc_offs = 0x0010, .syss_offs = 0x0014, - .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_EMUFREE | - SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE | - SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO | - MSTANDBY_SMART | MSTANDBY_SMART_WKUP), + .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_MIDLEMODE | + SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), .sysc_fields = &omap_hwmod_sysc_type1, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c index 810c205d668b..20b4398cec05 100644 --- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c @@ -2318,21 +2318,11 @@ static struct omap_hwmod_ocp_if dra7xx_l4_cfg__mpu = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -static struct omap_hwmod_addr_space dra7xx_ocp2scp1_addrs[] = { - { - .pa_start = 0x4a080000, - .pa_end = 0x4a08001f, - .flags = ADDR_TYPE_RT - }, - { } -}; - /* l4_cfg -> ocp2scp1 */ static struct omap_hwmod_ocp_if dra7xx_l4_cfg__ocp2scp1 = { .master = &dra7xx_l4_cfg_hwmod, .slave = &dra7xx_ocp2scp1_hwmod, .clk = "l4_root_clk_div", - .addr = dra7xx_ocp2scp1_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c index fa298bd2476e..90c88d498485 100644 --- a/arch/arm/mach-omap2/pdata-quirks.c +++ b/arch/arm/mach-omap2/pdata-quirks.c @@ -266,6 +266,11 @@ static void __init omap4_panda_legacy_init(void) { legacy_init_wl12xx(WL12XX_REFCLOCK_38, 0, 53); } + +static void __init var_som_om44_legacy_init(void) +{ + legacy_init_wl12xx(WL12XX_REFCLOCK_38, 0, 41); +} #endif #if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) @@ -376,6 +381,8 @@ static struct pdata_init pdata_quirks[] __initdata = { #ifdef CONFIG_ARCH_OMAP4 { "ti,omap4-sdp", omap4_sdp_legacy_init, }, { "ti,omap4-panda", omap4_panda_legacy_init, }, + { "variscite,var-dvk-om44", var_som_om44_legacy_init, }, + { "variscite,var-stk-om44", var_som_om44_legacy_init, }, #endif #ifdef CONFIG_SOC_AM33XX { "ti,am335x-evmsk", am335x_evmsk_legacy_init, }, diff --git a/arch/arm/mach-qcom/board.c b/arch/arm/mach-qcom/board.c index bae617ef0b31..c437a9941726 100644 --- a/arch/arm/mach-qcom/board.c +++ b/arch/arm/mach-qcom/board.c @@ -15,9 +15,11 @@ #include <asm/mach/arch.h> static const char * const qcom_dt_match[] __initconst = { + "qcom,apq8064", + "qcom,apq8074-dragonboard", + "qcom,apq8084", "qcom,msm8660-surf", "qcom,msm8960-cdp", - "qcom,apq8074-dragonboard", NULL }; diff --git a/drivers/clk/ti/clk-43xx.c b/drivers/clk/ti/clk-43xx.c index 67c8de572c50..527a43da3d33 100644 --- a/drivers/clk/ti/clk-43xx.c +++ b/drivers/clk/ti/clk-43xx.c @@ -105,6 +105,12 @@ static struct ti_dt_clk am43xx_clks[] = { DT_CLK(NULL, "func_12m_clk", "func_12m_clk"), DT_CLK(NULL, "vtp_clk_div", "vtp_clk_div"), DT_CLK(NULL, "usbphy_32khz_clkmux", "usbphy_32khz_clkmux"), + DT_CLK("48300200.ehrpwm", "tbclk", "ehrpwm0_tbclk"), + DT_CLK("48302200.ehrpwm", "tbclk", "ehrpwm1_tbclk"), + DT_CLK("48304200.ehrpwm", "tbclk", "ehrpwm2_tbclk"), + DT_CLK("48306200.ehrpwm", "tbclk", "ehrpwm3_tbclk"), + DT_CLK("48308200.ehrpwm", "tbclk", "ehrpwm4_tbclk"), + DT_CLK("4830a200.ehrpwm", "tbclk", "ehrpwm5_tbclk"), { .node_name = NULL }, }; diff --git a/drivers/reset/sti/reset-stih415.c b/drivers/reset/sti/reset-stih415.c index e6f6c41abe12..c93fd260447e 100644 --- a/drivers/reset/sti/reset-stih415.c +++ b/drivers/reset/sti/reset-stih415.c @@ -73,6 +73,7 @@ static const struct syscfg_reset_channel_data stih415_softresets[] = { [STIH415_USB0_SOFTRESET] = STIH415_SRST_REAR(SYSCFG_376, 9), [STIH415_USB1_SOFTRESET] = STIH415_SRST_REAR(SYSCFG_376, 10), [STIH415_USB2_SOFTRESET] = STIH415_SRST_REAR(SYSCFG_376, 11), + [STIH415_KEYSCAN_SOFTRESET] = STIH415_SRST_LPM(LPM_SYSCFG_1, 8), }; static struct syscfg_reset_controller_data stih415_powerdown_controller = { diff --git a/drivers/reset/sti/reset-stih416.c b/drivers/reset/sti/reset-stih416.c index fe3bf02bdc8c..5fc987076a90 100644 --- a/drivers/reset/sti/reset-stih416.c +++ b/drivers/reset/sti/reset-stih416.c @@ -104,6 +104,7 @@ static const struct syscfg_reset_channel_data stih416_softresets[] = { [STIH416_COMPO_A_SOFTRESET] = STIH416_SRST_CPU(SYSCFG_7564, 4), [STIH416_VP8_DEC_SOFTRESET] = STIH416_SRST_CPU(SYSCFG_7564, 10), [STIH416_VTG_MAIN_SOFTRESET] = STIH416_SRST_CPU(SYSCFG_7564, 16), + [STIH416_KEYSCAN_SOFTRESET] = STIH416_SRST_LPM(LPM_SYSCFG_1, 8), }; static struct syscfg_reset_controller_data stih416_powerdown_controller = { diff --git a/include/dt-bindings/clock/berlin2.h b/include/dt-bindings/clock/berlin2.h new file mode 100644 index 000000000000..0c30800175df --- /dev/null +++ b/include/dt-bindings/clock/berlin2.h @@ -0,0 +1,45 @@ +/* + * Berlin2 BG2/BG2CD clock tree IDs + */ + +#define CLKID_SYS 0 +#define CLKID_CPU 1 +#define CLKID_DRMFIGO 2 +#define CLKID_CFG 3 +#define CLKID_GFX 4 +#define CLKID_ZSP 5 +#define CLKID_PERIF 6 +#define CLKID_PCUBE 7 +#define CLKID_VSCOPE 8 +#define CLKID_NFC_ECC 9 +#define CLKID_VPP 10 +#define CLKID_APP 11 +#define CLKID_AUDIO0 12 +#define CLKID_AUDIO2 13 +#define CLKID_AUDIO3 14 +#define CLKID_AUDIO1 15 +#define CLKID_GFX3D_CORE 16 +#define CLKID_GFX3D_SYS 17 +#define CLKID_ARC 18 +#define CLKID_VIP 19 +#define CLKID_SDIO0XIN 20 +#define CLKID_SDIO1XIN 21 +#define CLKID_GFX3D_EXTRA 22 +#define CLKID_GC360 23 +#define CLKID_SDIO_DLLMST 24 +#define CLKID_GETH0 25 +#define CLKID_GETH1 26 +#define CLKID_SATA 27 +#define CLKID_AHBAPB 28 +#define CLKID_USB0 29 +#define CLKID_USB1 30 +#define CLKID_PBRIDGE 31 +#define CLKID_SDIO0 32 +#define CLKID_SDIO1 33 +#define CLKID_NFC 34 +#define CLKID_SMEMC 35 +#define CLKID_AUDIOHD 36 +#define CLKID_VIDEO0 37 +#define CLKID_VIDEO1 38 +#define CLKID_VIDEO2 39 +#define CLKID_TWD 40 diff --git a/include/dt-bindings/clock/berlin2q.h b/include/dt-bindings/clock/berlin2q.h new file mode 100644 index 000000000000..287fc3b4afb2 --- /dev/null +++ b/include/dt-bindings/clock/berlin2q.h @@ -0,0 +1,31 @@ +/* + * Berlin2 BG2Q clock tree IDs + */ + +#define CLKID_SYS 0 +#define CLKID_DRMFIGO 1 +#define CLKID_CFG 2 +#define CLKID_GFX2D 3 +#define CLKID_ZSP 4 +#define CLKID_PERIF 5 +#define CLKID_PCUBE 6 +#define CLKID_VSCOPE 7 +#define CLKID_NFC_ECC 8 +#define CLKID_VPP 9 +#define CLKID_APP 10 +#define CLKID_SDIO0XIN 11 +#define CLKID_SDIO1XIN 12 +#define CLKID_GFX2DAXI 13 +#define CLKID_GETH0 14 +#define CLKID_SATA 15 +#define CLKID_AHBAPB 16 +#define CLKID_USB0 17 +#define CLKID_USB1 18 +#define CLKID_USB2 19 +#define CLKID_USB3 20 +#define CLKID_PBRIDGE 21 +#define CLKID_SDIO 22 +#define CLKID_NFC 23 +#define CLKID_SMEMC 24 +#define CLKID_PCIE 25 +#define CLKID_TWD 26 diff --git a/include/dt-bindings/clock/r8a7790-clock.h b/include/dt-bindings/clock/r8a7790-clock.h index 9a7c4c5a35d1..1118f7a4bca6 100644 --- a/include/dt-bindings/clock/r8a7790-clock.h +++ b/include/dt-bindings/clock/r8a7790-clock.h @@ -50,6 +50,7 @@ #define R8A7790_CLK_SYS_DMAC0 19 /* MSTP3 */ +#define R8A7790_CLK_IIC2 0 #define R8A7790_CLK_TPU0 4 #define R8A7790_CLK_MMCIF1 5 #define R8A7790_CLK_SDHI3 11 @@ -57,6 +58,8 @@ #define R8A7790_CLK_SDHI1 13 #define R8A7790_CLK_SDHI0 14 #define R8A7790_CLK_MMCIF0 15 +#define R8A7790_CLK_IIC0 18 +#define R8A7790_CLK_IIC1 23 #define R8A7790_CLK_SSUSB 28 #define R8A7790_CLK_CMT1 29 #define R8A7790_CLK_USBDMAC0 30 diff --git a/include/dt-bindings/clock/r8a7791-clock.h b/include/dt-bindings/clock/r8a7791-clock.h index c3b0130f56c8..b050d18437ce 100644 --- a/include/dt-bindings/clock/r8a7791-clock.h +++ b/include/dt-bindings/clock/r8a7791-clock.h @@ -52,6 +52,8 @@ #define R8A7791_CLK_SDHI1 12 #define R8A7791_CLK_SDHI0 14 #define R8A7791_CLK_MMCIF0 15 +#define R8A7791_CLK_IIC0 18 +#define R8A7791_CLK_IIC1 23 #define R8A7791_CLK_SSUSB 28 #define R8A7791_CLK_CMT1 29 #define R8A7791_CLK_USBDMAC0 30 @@ -62,6 +64,7 @@ #define R8A7791_CLK_PWM 23 /* MSTP7 */ +#define R8A7791_CLK_EHCI 3 #define R8A7791_CLK_HSUSB 4 #define R8A7791_CLK_HSCIF2 13 #define R8A7791_CLK_SCIF5 14 diff --git a/include/dt-bindings/clock/stih415-clks.h b/include/dt-bindings/clock/stih415-clks.h new file mode 100644 index 000000000000..0d2c7397e028 --- /dev/null +++ b/include/dt-bindings/clock/stih415-clks.h @@ -0,0 +1,15 @@ +/* + * This header provides constants clk index STMicroelectronics + * STiH415 SoC. + */ +#ifndef _CLK_STIH415 +#define _CLK_STIH415 + +/* CLOCKGEN A0 */ +#define CLK_ICN_REG 0 +#define CLK_ETH1_PHY 4 + +/* CLOCKGEN A1 */ +#define CLK_GMAC0_PHY 3 + +#endif diff --git a/include/dt-bindings/clock/stih416-clks.h b/include/dt-bindings/clock/stih416-clks.h new file mode 100644 index 000000000000..552c779eb6af --- /dev/null +++ b/include/dt-bindings/clock/stih416-clks.h @@ -0,0 +1,15 @@ +/* + * This header provides constants clk index STMicroelectronics + * STiH416 SoC. + */ +#ifndef _CLK_STIH416 +#define _CLK_STIH416 + +/* CLOCKGEN A0 */ +#define CLK_ICN_REG 0 +#define CLK_ETH1_PHY 4 + +/* CLOCKGEN A1 */ +#define CLK_GMAC0_PHY 3 + +#endif diff --git a/include/dt-bindings/pinctrl/omap.h b/include/dt-bindings/pinctrl/omap.h index 404ba7ef7813..1c75b8ca5228 100644 --- a/include/dt-bindings/pinctrl/omap.h +++ b/include/dt-bindings/pinctrl/omap.h @@ -62,14 +62,19 @@ #define OMAP3630_CORE2_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x25a0) (val) #define OMAP3_WKUP_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x2a00) (val) #define AM33XX_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x0800) (val) -#define OMAP4_CORE_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x0040) (val) -#define OMAP4_WKUP_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0xe040) (val) #define AM4372_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x0800) (val) -#define OMAP5_CORE_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x2840) (val) -#define OMAP5_WKUP_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0xc840) (val) #define DRA7XX_CORE_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x3400) (val) /* + * Macros to allow using the offset from the padconf physical address + * instead of the offset from padconf base. + */ +#define OMAP_PADCONF_OFFSET(offset, base_offset) ((offset) - (base_offset)) + +#define OMAP4_IOPAD(offset, val) OMAP_PADCONF_OFFSET((offset), 0x0040) (val) +#define OMAP5_IOPAD(offset, val) OMAP_PADCONF_OFFSET((offset), 0x0040) (val) + +/* * Define some commonly used pins configured by the boards. * Note that some boards use alternative pins, so check * the schematics before using these. diff --git a/include/dt-bindings/reset-controller/stih415-resets.h b/include/dt-bindings/reset-controller/stih415-resets.h index c2f8a66913c5..c2329fe29cf6 100644 --- a/include/dt-bindings/reset-controller/stih415-resets.h +++ b/include/dt-bindings/reset-controller/stih415-resets.h @@ -22,5 +22,6 @@ #define STIH415_USB0_SOFTRESET 3 #define STIH415_USB1_SOFTRESET 4 #define STIH415_USB2_SOFTRESET 5 +#define STIH415_KEYSCAN_SOFTRESET 6 #endif /* _DT_BINDINGS_RESET_CONTROLLER_STIH415 */ diff --git a/include/dt-bindings/reset-controller/stih416-resets.h b/include/dt-bindings/reset-controller/stih416-resets.h index 2127743f23e3..fcf9af1ac0b2 100644 --- a/include/dt-bindings/reset-controller/stih416-resets.h +++ b/include/dt-bindings/reset-controller/stih416-resets.h @@ -46,5 +46,6 @@ #define STIH416_COMPO_A_SOFTRESET 25 #define STIH416_VP8_DEC_SOFTRESET 26 #define STIH416_VTG_MAIN_SOFTRESET 27 +#define STIH416_KEYSCAN_SOFTRESET 28 #endif /* _DT_BINDINGS_RESET_CONTROLLER_STIH416 */ diff --git a/include/dt-bindings/reset/altr,rst-mgr.h b/include/dt-bindings/reset/altr,rst-mgr.h new file mode 100644 index 000000000000..3f04908fb87c --- /dev/null +++ b/include/dt-bindings/reset/altr,rst-mgr.h @@ -0,0 +1,90 @@ +/* + * Copyright (c) 2014, Steffen Trumtrar <s.trumtrar@pengutronix.de> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _DT_BINDINGS_RESET_ALTR_RST_MGR_H +#define _DT_BINDINGS_RESET_ALTR_RST_MGR_H + +/* MPUMODRST */ +#define CPU0_RESET 0 +#define CPU1_RESET 1 +#define WDS_RESET 2 +#define SCUPER_RESET 3 +#define L2_RESET 4 + +/* PERMODRST */ +#define EMAC0_RESET 32 +#define EMAC1_RESET 33 +#define USB0_RESET 34 +#define USB1_RESET 35 +#define NAND_RESET 36 +#define QSPI_RESET 37 +#define L4WD0_RESET 38 +#define L4WD1_RESET 39 +#define OSC1TIMER0_RESET 40 +#define OSC1TIMER1_RESET 41 +#define SPTIMER0_RESET 42 +#define SPTIMER1_RESET 43 +#define I2C0_RESET 44 +#define I2C1_RESET 45 +#define I2C2_RESET 46 +#define I2C3_RESET 47 +#define UART0_RESET 48 +#define UART1_RESET 49 +#define SPIM0_RESET 50 +#define SPIM1_RESET 51 +#define SPIS0_RESET 52 +#define SPIS1_RESET 53 +#define SDMMC_RESET 54 +#define CAN0_RESET 55 +#define CAN1_RESET 56 +#define GPIO0_RESET 57 +#define GPIO1_RESET 58 +#define GPIO2_RESET 59 +#define DMA_RESET 60 +#define SDR_RESET 61 + +/* PER2MODRST */ +#define DMAIF0_RESET 64 +#define DMAIF1_RESET 65 +#define DMAIF2_RESET 66 +#define DMAIF3_RESET 67 +#define DMAIF4_RESET 68 +#define DMAIF5_RESET 69 +#define DMAIF6_RESET 70 +#define DMAIF7_RESET 71 + +/* BRGMODRST */ +#define HPS2FPGA_RESET 96 +#define LWHPS2FPGA_RESET 97 +#define FPGA2HPS_RESET 98 + +/* MISCMODRST*/ +#define ROM_RESET 128 +#define OCRAM_RESET 129 +#define SYSMGR_RESET 130 +#define SYSMGRCOLD_RESET 131 +#define FPGAMGR_RESET 132 +#define ACPIDMAP_RESET 133 +#define S2F_RESET 134 +#define S2FCOLD_RESET 135 +#define NRSTPIN_RESET 136 +#define TIMESTAMPCOLD_RESET 137 +#define CLKMGRCOLD_RESET 138 +#define SCANMGR_RESET 139 +#define FRZCTRLCOLD_RESET 140 +#define SYSDBG_RESET 141 +#define DBG_RESET 142 +#define TAPCOLD_RESET 143 +#define SDRCOLD_RESET 144 + +#endif diff --git a/include/dt-bindings/soc/qcom,gsbi.h b/include/dt-bindings/soc/qcom,gsbi.h new file mode 100644 index 000000000000..7ac4292333aa --- /dev/null +++ b/include/dt-bindings/soc/qcom,gsbi.h @@ -0,0 +1,26 @@ +/* Copyright (c) 2013, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#ifndef __DT_BINDINGS_QCOM_GSBI_H +#define __DT_BINDINGS_QCOM_GSBI_H + +#define GSBI_PROT_IDLE 0 +#define GSBI_PROT_I2C_UIM 1 +#define GSBI_PROT_I2C 2 +#define GSBI_PROT_SPI 3 +#define GSBI_PROT_UART_W_FC 4 +#define GSBI_PROT_UIM 5 +#define GSBI_PROT_I2C_UART 6 + +#define GSBI_CRCI_QUP 0 +#define GSBI_CRCI_UART 1 + +#endif |
