| Commit message (Collapse) | Author | Age | Files | Lines |
|---|
| |
|
|
|
|
|
|
|
|
|
|
| |
(PR42025)
As discussed on PR42025, with more complex boolean math we can end up with many truncations/extensions of the comparison results through each bitop.
This patch handles the cases introduced in combineBitcastvxi1 by pushing the sign extension through the AND/OR/XOR ops so its just the original SETCC ops that gets extended.
Differential Revision: https://reviews.llvm.org/D68226
llvm-svn: 373834
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
gcc and icc pass these types in zmm registers in zmm registers.
This patch implements a quick hack to override the register
type before calling convention handling to one that is legal.
Longer term we might want to do something similar to 256-bit
integer registers on AVX1 where we just split all the operations.
Fixes PR42957
Differential Revision: https://reviews.llvm.org/D66708
llvm-svn: 370495
|
| |
|
|
|
|
|
|
|
|
| |
In the case where we only want the sign bit (e.g. when using PACKSS truncation of comparison results for MOVMSK) then we can just demand the sign bit of the source operands.
This makes use of the fact that PACKSS saturates out of range values to the min/max int values - so the sign bit is always preserved.
Differential Revision: https://reviews.llvm.org/D60333
llvm-svn: 357859
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The transform performs a bitwise logic op in a wider type followed by
truncate when both inputs are truncated from the same source type:
logic_op (truncate x), (truncate y) --> truncate (logic_op x, y)
There are a bunch of other checks that should prevent doing this when
it might be harmful.
We already do this transform for scalars in this spot. The vector
limitation was shared with a check for the case when the operands are
extended. I'm not sure if that limit is needed either, but that would
be a separate patch.
Differential Revision: https://reviews.llvm.org/D55448
llvm-svn: 349303
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
picking the result type for the setcc.
Previously if getSetccResultType returned an illegal type we just fell back to using the default promoted type. This appears to have been to handle the case where for vectors getSetccResultType returns the input type, but the input type itself isn't legal and will need to be promoted. Without the legality check we would never reach a legal type.
But just picking the promoted type to be the setcc type can create strange setccs where the result type is 128 bits and the operand type is 256 bits. If for example the result type was promoted to v8i16 from v8i1, but the input type was promoted from v8i23 to v8i32. We currently handle this with custom lowering code in X86.
This legality check also caused us reject the getSetccResultType when the input type needed to be widened or split. Even though that result wouldn't have caused legalization to get stuck.
This patch tries to fix this by detecting the getSetccResultType needs to be promoted. If its input type also needs to be promoted we'll try a ask for a new setcc result type based on its eventual promoted value. Otherwise we fall back to default type to promote to.
For any other illegal values we might get back from the initial call to getSetccResultType we just keep and allow it to be re-legalized later via splitting or widening or scalarizing.
llvm-svn: 327683
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
v32i1)) without AVX512 to prevent scalarization
Summary:
We have an early DAG combine to turn these patterns into MOVMSK, but that combine doesn't work if the vXi1 type has more elements than the widest legal vXi8 type. Type legalization will eventually split it down to v16i1 or v32i1 and then the bitcast gets legalized to a truncstore and a scalar load. The truncstore will get lowered to a series of extracts and bit math.
This patch adds a custom legalization to use a sign extend and MOVMSK instead. This prevents the eventual scalarization.
Reviewers: spatel, RKSimon, zvi
Reviewed By: RKSimon
Subscribers: mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D43593
llvm-svn: 326119
|
| |
|
|
|
|
|
|
|
|
|
|
| |
Discussed here:
http://lists.llvm.org/pipermail/llvm-dev/2018-January/120320.html
In preparation for adding support for named vregs we are changing the sigil for
physical registers in MIR to '$' from '%'. This will prevent name clashes of
named physical register with named vregs.
llvm-svn: 323922
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
default of promoting to v32i8.
Summary:
For the most part its better to keep v32i1 as a mask type of a narrower width than trying to promote it to a ymm register.
I had to add some overrides to the methods that get the types for the calling convention so that we still use v32i8 for argument/return purposes.
There are still some regressions in here. I definitely saw some around shuffles. I think we probably should move vXi1 shuffle from lowering to a DAG combine where I think the extend and truncate we have to emit would be better combined.
I think we also need a DAG combine to remove trunc from (extract_vector_elt (trunc))
Overall this removes something like 13000 CHECK lines from lit tests.
Reviewers: zvi, RKSimon, delena, spatel
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D42031
llvm-svn: 323201
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
This was completely broken, but hopefully fixed by this patch.
In cases where it is needed, a vector with non byte-sized elements is stored
by extracting, zero-extending, shift:ing and or:ing the elements into an
integer of the same width as the vector, which is then stored.
Review: Eli Friedman, Ulrich Weigand
https://reviews.llvm.org/D42100#inline-369520
https://bugs.llvm.org/show_bug.cgi?id=35520
llvm-svn: 323042
|
| |
|
|
|
|
|
|
|
|
| |
for AVX512F.
A v32i1 CONCAT_VECTORS of v16i1 uses promotion to v32i8 to legalize the v32i1. This results in a bunch of extract_vector_elts and a build_vector that ultimately gets scalarized.
This patch checks to see if v16i8 is legal and inserts a any_extend to that so that we can concat v16i8 to v32i8 and avoid creating the extracts.
llvm-svn: 320674
|
| |
|
|
|
|
|
|
|
|
| |
account whether the input type also needs to be promoted.
If so go ahead and get the promoted input vector to extract from. Previously, we would create a bunch of any_extends of extract_vector_elts with illegal input type that needs to be promoted. The legalization of those extract_vector_elts would then potentially introduce a truncate. So now we have a bunch of any_extends of truncates. By legalizing both parts together we avoid creating these extra nodes.
The test changes seem to be because we were previously combining the build_vector with the any_extend before the any_extend got combined with the truncate.
llvm-svn: 320669
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Work towards the unification of MIR and debug output by refactoring the
interfaces.
For MachineOperand::print, keep a simple version that can be easily called
from `dump()`, and a more complex one which will be called from both the
MIRPrinter and MachineInstr::print.
Add extra checks inside MachineOperand for detached operands (operands
with getParent() == nullptr).
https://reviews.llvm.org/D40836
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" -o -name "*.s" \) -type f -print0 | xargs -0 sed -i '' -E 's/kill: ([^ ]+) ([^ ]+)<def> ([^ ]+)/kill: \1 def \2 \3/g'
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" -o -name "*.s" \) -type f -print0 | xargs -0 sed -i '' -E 's/kill: ([^ ]+) ([^ ]+) ([^ ]+)<def>/kill: \1 \2 def \3/g'
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" -o -name "*.s" \) -type f -print0 | xargs -0 sed -i '' -E 's/kill: def ([^ ]+) ([^ ]+) ([^ ]+)<def>/kill: def \1 \2 def \3/g'
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" -o -name "*.s" \) -type f -print0 | xargs -0 sed -i '' -E 's/<def>//g'
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" -o -name "*.s" \) -type f -print0 | xargs -0 sed -i '' -E 's/([^ ]+)<kill>/killed \1/g'
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" -o -name "*.s" \) -type f -print0 | xargs -0 sed -i '' -E 's/([^ ]+)<imp-use,kill>/implicit killed \1/g'
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" -o -name "*.s" \) -type f -print0 | xargs -0 sed -i '' -E 's/([^ ]+)<dead>/dead \1/g'
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" -o -name "*.s" \) -type f -print0 | xargs -0 sed -i '' -E 's/([^ ]+)<def[ ]*,[ ]*dead>/dead \1/g'
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" -o -name "*.s" \) -type f -print0 | xargs -0 sed -i '' -E 's/([^ ]+)<imp-def[ ]*,[ ]*dead>/implicit-def dead \1/g'
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" -o -name "*.s" \) -type f -print0 | xargs -0 sed -i '' -E 's/([^ ]+)<imp-def>/implicit-def \1/g'
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" -o -name "*.s" \) -type f -print0 | xargs -0 sed -i '' -E 's/([^ ]+)<imp-use>/implicit \1/g'
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" -o -name "*.s" \) -type f -print0 | xargs -0 sed -i '' -E 's/([^ ]+)<internal>/internal \1/g'
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" -o -name "*.s" \) -type f -print0 | xargs -0 sed -i '' -E 's/([^ ]+)<undef>/undef \1/g'
llvm-svn: 320022
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
As part of the unification of the debug format and the MIR format, print
MBB references as '%bb.5'.
The MIR printer prints the IR name of a MBB only for block definitions.
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)->getNumber\(\)/" << printMBBReference(*\1)/g'
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)\.getNumber\(\)/" << printMBBReference(\1)/g'
* find . \( -name "*.txt" -o -name "*.s" -o -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#([0-9]+)/%bb.\1/g'
* grep -nr 'BB#' and fix
Differential Revision: https://reviews.llvm.org/D40422
llvm-svn: 319665
|
| |
|
|
|
|
|
|
|
|
|
| |
As part of the unification of the debug format and the MIR format,
always print registers as lowercase.
* Only debug printing is affected. It now follows MIR.
Differential Revision: https://reviews.llvm.org/D40417
llvm-svn: 319187
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This reverts r317579, originally committed as r317100.
There is a design issue with marking CFI instructions duplicatable. Not
all targets support the CFIInstrInserter pass, and targets like Darwin
can't cope with duplicated prologue setup CFI instructions. The compact
unwind info emission fails.
When the following code is compiled for arm64 on Mac at -O3, the CFI
instructions end up getting tail duplicated, which causes compact unwind
info emission to fail:
int a, c, d, e, f, g, h, i, j, k, l, m;
void n(int o, int *b) {
if (g)
f = 0;
for (; f < o; f++) {
m = a;
if (l > j * k > i)
j = i = k = d;
h = b[c] - e;
}
}
We get assembly that looks like this:
; BB#1: ; %if.then
Lloh3:
adrp x9, _f@GOTPAGE
Lloh4:
ldr x9, [x9, _f@GOTPAGEOFF]
mov w8, wzr
Lloh5:
str wzr, [x9]
stp x20, x19, [sp, #-16]! ; 8-byte Folded Spill
.cfi_def_cfa_offset 16
.cfi_offset w19, -8
.cfi_offset w20, -16
cmp w8, w0
b.lt LBB0_3
b LBB0_7
LBB0_2: ; %entry.if.end_crit_edge
Lloh6:
adrp x8, _f@GOTPAGE
Lloh7:
ldr x8, [x8, _f@GOTPAGEOFF]
Lloh8:
ldr w8, [x8]
stp x20, x19, [sp, #-16]! ; 8-byte Folded Spill
.cfi_def_cfa_offset 16
.cfi_offset w19, -8
.cfi_offset w20, -16
cmp w8, w0
b.ge LBB0_7
LBB0_3: ; %for.body.lr.ph
Note the multiple .cfi_def* directives. Compact unwind info emission
can't handle that.
llvm-svn: 317726
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Reland r317100 with minor fix regarding ComputeCommonTailLength function in
BranchFolding.cpp. Skipping top CFI instructions block needs to executed on
several more return points in ComputeCommonTailLength().
Original r317100 message:
"Correct dwarf unwind information in function epilogue for X86"
This patch aims to provide correct dwarf unwind information in function
epilogue for X86.
It consists of two parts. The first part inserts CFI instructions that set
appropriate cfa offset and cfa register in emitEpilogue() in
X86FrameLowering. This part is X86 specific.
The second part is platform independent and ensures that:
- CFI instructions do not affect code generation
- Unwind information remains correct when a function is modified by
different passes. This is done in a late pass by analyzing information
about cfa offset and cfa register in BBs and inserting additional CFI
directives where necessary.
Changed CFI instructions so that they:
- are duplicable
- are not counted as instructions when tail duplicating or tail merging
- can be compared as equal
Added CFIInstrInserter pass:
- analyzes each basic block to determine cfa offset and register valid at
its entry and exit
- verifies that outgoing cfa offset and register of predecessor blocks match
incoming values of their successors
- inserts additional CFI directives at basic block beginning to correct the
rule for calculating CFA
Having CFI instructions in function epilogue can cause incorrect CFA
calculation rule for some basic blocks. This can happen if, due to basic
block reordering, or the existence of multiple epilogue blocks, some of the
blocks have wrong cfa offset and register values set by the epilogue block
above them.
CFIInstrInserter is currently run only on X86, but can be used by any target
that implements support for adding CFI instructions in epilogue.
Patch by Violeta Vukobrat.
llvm-svn: 317579
|
| |
|
|
|
|
|
| |
This reverts r317100 as it introduced sanitizer-x86_64-linux-autoconf
buildbot failure (build #15606).
llvm-svn: 317136
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch aims to provide correct dwarf unwind information in function
epilogue for X86.
It consists of two parts. The first part inserts CFI instructions that set
appropriate cfa offset and cfa register in emitEpilogue() in
X86FrameLowering. This part is X86 specific.
The second part is platform independent and ensures that:
- CFI instructions do not affect code generation
- Unwind information remains correct when a function is modified by
different passes. This is done in a late pass by analyzing information
about cfa offset and cfa register in BBs and inserting additional CFI
directives where necessary.
Changed CFI instructions so that they:
- are duplicable
- are not counted as instructions when tail duplicating or tail merging
- can be compared as equal
Added CFIInstrInserter pass:
- analyzes each basic block to determine cfa offset and register valid at
its entry and exit
- verifies that outgoing cfa offset and register of predecessor blocks match
incoming values of their successors
- inserts additional CFI directives at basic block beginning to correct the
rule for calculating CFA
Having CFI instructions in function epilogue can cause incorrect CFA
calculation rule for some basic blocks. This can happen if, due to basic
block reordering, or the existence of multiple epilogue blocks, some of the
blocks have wrong cfa offset and register values set by the epilogue block
above them.
CFIInstrInserter is currently run only on X86, but can be used by any target
that implements support for adding CFI instructions in epilogue.
Patch by Violeta Vukobrat.
Differential Revision: https://reviews.llvm.org/D35844
llvm-svn: 317100
|
| |
|
|
|
|
| |
These are only testing 64-bit targets so we don't need the regex
llvm-svn: 317021
|
| |
|
|
|
|
|
|
|
|
|
|
| |
computeKnownBits/ComputeNumSignBits
For cases where we know the floating point representations match the bitcasted integer equivalent, allow bitcasting to these types.
This is especially useful for the X86 floating point compare results which return all/zero bits but as a floating point type.
Differential Revision: https://reviews.llvm.org/D39289
llvm-svn: 316831
|
| |
|
|
|
|
|
|
| |
just PACKSSWB.
By using the widest type possible for PACKSS truncation we have a better chance of being able to peek through bitcasts and improves other combines driven by ComputeNumSignBits.
llvm-svn: 316448
|
| |
|
|
|
|
| |
Avoid the retl/retq changes in an upcoming patch
llvm-svn: 316328
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Summary:
This suppresses the generation of .Lcfi labels in our textual assembler.
It was annoying that this generated cascading .Lcfi labels:
llc foo.ll -o - | llvm-mc | llvm-mc
After three trips through MCAsmStreamer, we'd have three labels in the
output when none are necessary. We should only bother creating the
labels and frame data when making a real object file.
This supercedes D38605, which moved the entire .seh_ implementation into
MCObjectStreamer.
This has the advantage that we do more checking when emitting textual
assembly, as a minor efficiency cost. Outputting textual assembly is not
performance critical, so this shouldn't matter.
Reviewers: majnemer, MatzeB
Subscribers: qcolombet, nemanjai, javed.absar, eraman, hiraditya, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D38638
llvm-svn: 315259
|
| |
|
|
|
|
| |
Missed in D38472
llvm-svn: 314916
|
| |
|
|
|
|
| |
Extension to D38472
llvm-svn: 314901
|
| |
|
|
|
|
|
|
|
|
| |
If the upper bits of a truncation shuffle patterns have at least the minimum number of sign/zero bits on their inputs then we can safely use PACKSS/PACKUS as shuffles.
Partial fix for https://bugs.llvm.org/show_bug.cgi?id=34773
Differential Revision: https://reviews.llvm.org/D38472
llvm-svn: 314788
|
| |
|
|
|
|
|
|
|
|
|
|
| |
bits.
For cases where we are BITCASTing to vectors of smaller elements, then if the entire source was a splatted sign (src's NumSignBits == SrcBitWidth) we can say that the dst's NumSignBit == DstBitWidth, as we're just splitting those sign bits across multiple elements.
We could generalize this but at the moment the only use case I have is to peek through bitcasts to vector comparison results.
Differential Revision: https://reviews.llvm.org/D37849
llvm-svn: 313543
|
| |
|
|
| |
llvm-svn: 313246
|
| |
|
|
|
|
|
|
| |
Helps improve combineLogicBlendIntoPBLENDV support by allowing us to peek into through PACKSS truncations of vector comparison results.
Differential Revision: https://reviews.llvm.org/D37680
llvm-svn: 312916
|
| |
|
|
|
|
| |
Differential Revision: https://reviews.llvm.org/D35839
llvm-svn: 309298
|
| |
|
|
|
|
|
|
|
|
|
|
| |
Currently we only support (i32 bitcast(v32i1)) using the AVX2 VPMOVMSKB ymm instruction.
This patch adds support for splitting pre-AVX2 targets into 2 x (V)PMOVMSKB xmm instructions and merging the integer results.
In future we could probably generalize this to handle more cases.
Differential Revision: https://reviews.llvm.org/D35303
llvm-svn: 308723
|
| |
|
|
| |
llvm-svn: 307790
|
|
|
Improves test coverage for pre-AVX512 targets as well
llvm-svn: 307783
|
